Search Results

Search found 96916 results on 3877 pages for 'code model'.

Page 67/3877 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • Code Clone Analysis on Rawr &ndash; Part 1

    - by Dylan Smith
    In this post we’ll take a look at the first result from the Code Clone Analysis, and do some refactoring to eliminate the duplication.  The first result indicated that it found an exact match repeated 14 times across the solution, with 18 lines of duplicated code in each of the 14 blocks.   Net Lines Of Code Deleted: 179     In this case the code in question was a bunch of classes representing the various Bosses.  Every Boss class has a constructor that initializes a whole bunch of properties of that boss, however, for most bosses a lot of these are simply set to 0’s.     Every Boss class inherits from the class MultiDiffBoss, so I simply moved all the initialization of the various properties to the base class constructor, and left it up to the Boss subclasses to only set those that are different than the default values. In this case there are actually 22 Boss subclasses, however, due to some inconsistencies in the code structure Code Clone only identified 14 of them as identical blocks.  Since I was in there refactoring the 14 identified already, it was pretty straightforward to identify the other 8 subclasses that had the same duplicated behavior and refactor those also.   Note: Code Clone Analysis is pretty slow right now.  It takes approx 1 min to build this solution, but it takes 9 mins to run Code Clone Analysis.  Personally, if the results are high quality I’m OK with it taking a long time to run since I don’t expect it’s something I would be running all that often.  However, it would be nice to be able to run it as part of a nightly build, but at this time I don’t believe it’s possible to run outside of Visual Studio due to a dependency on the meta-data available in the VS environment.

    Read the article

  • Design: How to model / where to store relational data between classes

    - by Walker
    I'm trying to figure out the best design here, and I can see multiple approaches, but none that seems "right." There are three relevant classes here: Base, TradingPost, and Resource. Each Base has a TradingPost which can offer various Resources depending on the Base's tech level. Where is the right place to store the minimum tech level a base must possess to offer any given resource? A database seems like overkill. Putting it in each subclass of Resource seems wrong--that's not an intrinsic property of the Resource. Do I have a mediating class, and if so, how does it work? It's important that I not be duplicating code; that I have one place where I set the required tech level for a given item. Essentially, where does this data belong? P.S. Feel free to change the title; I struggled to come up with one that fits.

    Read the article

  • What are some techniques I can use to refactor Object Oriented code into Functional code?

    - by tieTYT
    I've spent about 20-40 hours developing part of a game using JavaScript and HTML5 canvas. When I started I had no idea what I was doing. So it started as a proof of concept and is coming along nicely now, but it has no automated tests. The game is starting to become complex enough that it could benefit from some automated testing, but it seems tough to do because the code depends on mutating global state. I'd like to refactor the whole thing using Underscore.js, a functional programming library for JavaScript. Part of me thinks I should just start from scratch using a Functional Programming style and testing. But, I think refactoring the imperative code into declarative code might be a better learning experience and a safer way to get to my current state of functionality. Problem is, I know what I want my code to look like in the end, but I don't know how to turn my current code into it. I'm hoping some people here could give me some tips a la the Refactoring book and Working Effectively With Legacy Code. For example, as a first step I'm thinking about "banning" global state. Take every function that uses a global variable and pass it in as a parameter instead. Next step may be to "ban" mutation, and to always return a new object. Any advice would be appreciated. I've never taken OO code and refactored it into Functional code before.

    Read the article

  • Visual Studio 2013, ASP.NET MVC 5 Scaffolded Controls, and Bootstrap

    - by plitwin
    A few days ago, I created an ASP.NET MVC 5 project in the brand new Visual Studio 2013. I added some model classes and then proceeded to scaffold a controller class and views using the Entity Framework. Scaffolding Some Views Visual Studio 2013, by default, uses the Bootstrap 3 responsive CSS framework. Great; after all, we all want our web sites to be responsive and work well on mobile devices. Here’s an example of a scaffolded Create view as shown in Google Chrome browser   Looks pretty good. Okay, so let’s increase the width of the Title, Description, Address, and Date/Time textboxes. And decrease the width of the  State and MaxActors textbox controls. Can’t be that hard… Digging Into the Code Let’s take a look at the scaffolded Create.cshtml file. Here’s a snippet of code behind the Create view. Pretty simple stuff. @using (Html.BeginForm()) { @Html.AntiForgeryToken() <div class="form-horizontal"> <h4>RandomAct</h4> <hr /> @Html.ValidationSummary(true) <div class="form-group"> @Html.LabelFor(model => model.Title, new { @class = "control-label col-md-2" }) <div class="col-md-10"> @Html.EditorFor(model => model.Title) @Html.ValidationMessageFor(model => model.Title) </div> </div> <div class="form-group"> @Html.LabelFor(model => model.Description, new { @class = "control-label col-md-2" }) <div class="col-md-10"> @Html.EditorFor(model => model.Description) @Html.ValidationMessageFor(model => model.Description) </div> </div> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } A little more digging and I discover that there are three CSS files of importance in how the page is rendered: boostrap.css (and its minimized cohort) and site.css as shown below.   The Root of the Problem And here’s the root of the problem which you’ll find the following CSS in Site.css: /* Set width on the form input elements since they're 100% wide by default */ input, select, textarea { max-width: 280px; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Yes, Microsoft is for some reason setting the maximum width of all input, select, and textarea controls to 280 pixels. Not sure the motivation behind this, but until you change this or overrride this by assigning the form controls to some other CSS class, your controls will never be able to be wider than 280px. The Fix Okay, so here’s the deal: I hope to become very competent in all things Bootstrap in the near future, but I don’t think you should have to become a Bootstrap guru in order to modify some scaffolded control widths. And you don’t. Here is the solution I came up with: Find the aforementioned CSS code in SIte.css and change it to something more tenable. Such as: /* Set width on the form input elements since they're 100% wide by default */ input, select, textarea { max-width: 600px; } Because the @Html.EditorFor html helper doesn’t support the passing of HTML attributes, you will need to repalce any @Html.EditorFor() helpers with @Html.TextboxFor(), @Html.TextAreaFor, @Html.CheckBoxFor, etc. helpers, and then add a custom width attribute to each control you wish to modify. Thus, the earlier stretch of code might end up looking like this: @using (Html.BeginForm()) { @Html.AntiForgeryToken() <div class="form-horizontal"> <h4>Random Act</h4> <hr /> @Html.ValidationSummary(true) <div class="form-group"> @Html.LabelFor(model => model.Title, new { @class = "control-label col-md-2" }) <div class="col-md-10"> @Html.TextBoxFor(model => model.Title, new { style = "width: 400px" }) @Html.ValidationMessageFor(model => model.Title) </div> </div> <div class="form-group"> @Html.LabelFor(model => model.Description, new { @class = "control-label col-md-2" }) <div class="col-md-10"> @Html.TextAreaFor(model => model.Description, new { style = "width: 400px" }) @Html.ValidationMessageFor(model => model.Description) </div> </div> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Resulting Form Here’s what the page looks like after the fix: Technorati Tags: ASP.NET MVC,ASP.NET MVC 5,Bootstrap

    Read the article

  • Interface contracts – forcing code contracts through interfaces

    - by DigiMortal
    Sometimes we need a way to make different implementations of same interface follow same rules. One option is to duplicate contracts to all implementation but this is not good option because we have duplicated code then. The other option is to force contracts to all implementations at interface level. In this posting I will show you how to do it using interface contracts and contracts class. Using code from previous example about unit testing code with code contracts I will go further and force contracts at interface level. Here is the code from previous example. Take a careful look at it because I will talk about some modifications to this code soon. public interface IRandomGenerator {     int Next(int min, int max); }   public class RandomGenerator : IRandomGenerator {     private Random _random = new Random();       public int Next(int min, int max)     {         return _random.Next(min, max);     } }    public class Randomizer {     private IRandomGenerator _generator;       private Randomizer()     {         _generator = new RandomGenerator();     }       public Randomizer(IRandomGenerator generator)     {         _generator = generator;     }       public int GetRandomFromRangeContracted(int min, int max)     {         Contract.Requires<ArgumentOutOfRangeException>(             min < max,             "Min must be less than max"         );           Contract.Ensures(             Contract.Result<int>() >= min &&             Contract.Result<int>() <= max,             "Return value is out of range"         );           return _generator.Next(min, max);     } } If we look at the GetRandomFromRangeContracted() method we can see that contracts set in this method are applicable to all implementations of IRandomGenerator interface. Although we can write new implementations as we want these implementations need exactly the same contracts. If we are using generators somewhere else then code contracts are not with them anymore. To solve the problem we will force code contracts at interface level. NB! To make the following code work you must enable Contract Reference Assembly building from project settings. Interface contracts and contracts class Interface contains no code – only definitions of members that implementing type must have. But code contracts must be defined in body of member they are part of. To get over this limitation, code contracts are defined in separate contracts class. Interface is bound to this class by special attribute and contracts class refers to interface through special attribute. Here is the IRandomGenerator with contracts and contracts class. Also I write simple fake so we can test contracts easily based only on interface mock. [ContractClass(typeof(RandomGeneratorContracts))] public interface IRandomGenerator {     int Next(int min, int max); }   [ContractClassFor(typeof(IRandomGenerator))] internal sealed class RandomGeneratorContracts : IRandomGenerator {     int IRandomGenerator.Next(int min, int max)     {         Contract.Requires<ArgumentOutOfRangeException>(                 min < max,                 "Min must be less than max"             );           Contract.Ensures(             Contract.Result<int>() >= min &&             Contract.Result<int>() <= max,             "Return value is out of range"         );           return default(int);     } }   public class RandomFake : IRandomGenerator {     private int _testValue;       public RandomGen(int testValue)     {         _testValue = testValue;     }       public int Next(int min, int max)     {         return _testValue;     } } To try out these changes use the following code. var gen = new RandomFake(3);   try {     gen.Next(10, 1); } catch(Exception ex) {     Debug.WriteLine(ex.Message); }   try {     gen.Next(5, 10); } catch(Exception ex) {     Debug.WriteLine(ex.Message); } Now we can force code contracts to all types that implement our IRandomGenerator interface and we must test only the interface to make sure that contracts are defined correctly.

    Read the article

  • ASP.NET MVC 3 Hosting :: MVC 2 Strongly Typed HTML Helper and Enhanced Validation Sample

    - by mbridge
    In lue of the off the official release of ASP.NET MVC 2 RTM, I decided I would put together a quick sample of the enhanced HTML.Helpers and validation controls. I am going to use my sample event site where I will have a form so a user can search for information about a certain events. So when the Search page loads the Search action is fired return my strongly typed model. to the view.    1: [HttpGet]    2: public ViewResult Search(): public ViewResult Search()    3: {    4:     IList<EventsModel> result = _eventsService.GetEventList();    5:     var viewModel = new EventSearchModel    6:                         {    7:                             EventList = new SelectList(result, "EventCode","EventName","Select Event")    8:                         };    9:     return View(viewModel);  10: } Nothing special here, although I did want to show how to load up a strongly typed drop down list because that hung me up for a little bit. So to that, I am going to pass back a SelectList to the view and my HTML helper should no how to load this. So lets take a look at the mark up for the view.    1: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master"    2: Inherits="System.Web.Mvc.ViewPage<EventsSample.Models.EventSearchModel>" %>    3:     4: <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server">    5:     Search    6: </asp:Content>    7:     8: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server">    9:   10:     <h2>Search for Events</h2>  11:   12:     <% using (Html.BeginForm("Search","Events")) {%>  13:         <%= Html.ValidationSummary(true) %>  14:          15:         <fieldset>  16:             <legend>Fields</legend>  17:              18:             <div class="editor-label">  19:                 <%= Html.LabelFor(model => model.EventNumber) %>  20:             </div>  21:             <div class="editor-field">  22:                 <%= Html.TextBoxFor(model => model.EventNumber) %>  23:                 <%= Html.ValidationMessageFor(model => model.EventNumber) %>  24:             </div>  25:              26:             <div class="editor-label">  27:                 <%= Html.LabelFor(model => model.GuestLastName) %>  28:             </div>  29:             <div class="editor-field">  30:                 <%= Html.TextBoxFor(model => model.GuestLastName) %>  31:                 <%= Html.ValidationMessageFor(model => model.GuestLastName) %>  32:             </div>  33:              34:             <div class="editor-label">  35:                 <%= Html.LabelFor(model => model.EventName) %>  36:             </div>  37:             <div class="editor-field">  38:                 <%= Html.DropDownListFor(model => model.EventName, Model.EventList,"Select Event") %>  39:                 <%= Html.ValidationMessageFor(model => model.EventName) %>  40:             </div>  41:              42:             <p>  43:                 <input type="submit" value="Save" />  44:             </p>  45:         </fieldset>  46:   47:     <% } %>  48:   49:     <div>  50:         <%= Html.ActionLink("Back to List", "Index") %>  51:     </div>  52:   53: </asp:Content> A nice feature is the scaffolding that MVC has to generate code. I simply right clicked inside my Search() action, inside the EventsController and selected “Add View” and then I selected my strongly typed object that I wanted to pass to the view and also selected that I wanted the content type be “Edit”. With that the aspx page was completely generated, although I did have to go back in and change the textbox for the Event Names to a drop down list of the names to select from. The new feature with MVC 2 are the strongly typed HTML helpers. So now, my textboxes, drop down list, and validation helpers are all strongly typed to my model.  This features gives you the benefits of intellisense and also makes it easier to debug. “The Gu” has a great post about the feature in case you want more details. The DropDownListFor function to generate the drop down list was a little tricky for me. You first need to use a Lanbda expression to pass in the property you want the selected value assigned to in your model, and then you need to pass in the list directly from the model. Validations To validate the form, you can use the strongly type validation HTML helpers which will inspect your model and return errors if the validation fails. The definitions of these rules are set directly on the Model itself so lets take a look.    1: using System.ComponentModel.DataAnnotations;    2: using System.Web.Mvc;    3:     4: namespace EventsSample.Models    5: {    6:     public class EventSearchModel    7:     {    8:         [Required(ErrorMessage = "Please enter the event number.")]    9:         [RegularExpression(@"\w{6}",  10:             ErrorMessage = "The Event Number must be 6 letters and/or numbers.")]  11:         public string EventNumber { get; set; }  12:   13:         [Required(ErrorMessage = "Please enter the guest's last name.")]  14:         [RegularExpression(@"^[A-Za-zÀ-ÖØ-öø-ÿ1-9 '\-\.]{1,22}$",  15:             ErrorMessage = "The gueest's last name must 1 to 20 characters.")]  16:         public string GuestLastName { get; set; }  17:   18:         public string EventName { get; set; }  19:         public SelectList EventList { get; set; }  20:     }  21: } Pretty cool! Okay, the only thing left to do is perform the validation in the POST action.    1: [HttpPost]    2: public ViewResult Search(EventSearchModel eventSearchModel)    3: {    4:     if (ModelState.IsValid) return View("SearchResults");    5:     else    6:     {    7:          IList<EventsModel> result = _eventsService.GetEventList();    8:         eventSearchModel.EventList = new SelectList(result, "EVentCode","EventName");   9:   10:         return View(eventSearchModel);  11:     }  12: }  13:     } If the form entries are valid, here I am simply displaying the SearchResult, but in a real world sample I would also go out get the results first. You get the idea though. In my case, when the form is not valid, I also had to reload my SelectList with the event names before I loaded the page again. Remember this is MVC, no _VieState here :) So that’s it. Now my form is validating the data and when it fails it looks like this.

    Read the article

  • If you are forced to use an Anemic domain model, where do you put your business logic and calculated

    - by Jess
    Our current O/RM tool does not really allow for rich domain models, so we are forced to utilize anemic (DTO) entities everywhere. This has worked fine, but I continue to struggle with where to put basic object-based business logic and calculated fields. Current layers: Presentation Service Repository Data/Entity Our repository layer has most of the basic fetch/validate/save logic, although the service layer does a lot of the more complex validation & saving (since save operations also do logging, checking of permissions, etc). The problem is where to put code like this: Decimal CalculateTotal(LineItemEntity li) { return li.Quantity * li.Price; } or Decimal CalculateOrderTotal(OrderEntity order) { Decimal orderTotal = 0; foreach (LineItemEntity li in order.LineItems) { orderTotal += CalculateTotal(li); } return orderTotal; } Any thoughts?

    Read the article

  • Dropdownlist post in ASP.NET MVC3 and Entity Framework Model

    - by Josh Blade
    I have 3 tables: RateProfile RateProfileID ProfileName Rate RateID RateProfileID PanelID Other stuff to update Panel PanelID PanelName I have models for each of these. I have an edit page using the RateProfile model. I display the information for RateProfile and also all of the Rates associated with it. This works fine and I can update it fine. However, I also added a dropdown so that I can filter Rates by PanelID. I need it to post back on change so that it can display the filtered rates. I'm using @Html.DropDownList("PanelID", (SelectList)ViewData["PanelDropDown"], new { onchange = "$('#RateForm').submit()" }) for my dropdownlist. Whenever it posts back to my HttpPost Edit method though, it seems to be missing all information about the Rates navigation property. It's weird because I thought it would do exactly what the input/submit button that I have in the form does (which actually passes the entire model back to my HttpPost Edit action and does what I want it to do). The panelID is properly being passed to my HttpPost Edit method and on to the next view, but when I try to query the Model.Rates navigation property is null (only when the post comes from the dropdown. Everything works fine when the post comes from my submit input). Get Edit: public ActionResult Edit(int id, int panelID = 1) { RateProfile rateprofile = db.RateProfiles.Single(r => r.RateProfileID == id); var panels = db.Panels; ViewData["PanelDropDown"] = new SelectList(panels, "PanelID", "PanelName", panelID); ViewBag.PanelID = panelID; return View(rateprofile); } HttpPost Edit: [HttpPost] public ActionResult Edit(RateProfile rateprofile, int panelID) { var panels = db.Panels; ViewData["PanelDropDown"] = new SelectList(panels, "PanelID", "PanelName", panelID); ViewBag.PanelID = panelID; if (ModelState.IsValid) { db.Entry(rateprofile).State = EntityState.Modified; foreach (Rate dimerate in rateprofile.Rates) { db.Entry(dimerate).State = EntityState.Modified; } db.SaveChanges(); return View(rateprofile); } return View(rateprofile); } View: @model PDR.Models.RateProfile @using (Html.BeginForm(null,null,FormMethod.Post, new {id="RateForm"})) { <div> @Html.Label("Panel") @Html.DropDownList("PanelID", (SelectList)ViewData["PanelDropDown"], new { onchange = "$('#RateForm').submit()" }) </div> @{var rates= Model.Rates.Where(a => a.PanelID == ViewBag.PanelID).OrderBy(a => a.minCount).ToList();} @for (int i = 0; i < rates.Count; i++) { <tr> <td> @Html.HiddenFor(modelItem => rates[i].RateProfileID) @Html.HiddenFor(modelItem => rates[i].RateID) @Html.HiddenFor(modelItem => rates[i].PanelID) @Html.EditorFor(modelItem => rates[i].minCount) @Html.ValidationMessageFor(model => rates[i].minCount) </td> <td> @Html.EditorFor(modelItem => rates[i].maxCount) @Html.ValidationMessageFor(model => rates[i].maxCount) </td> <td> @Html.EditorFor(modelItem => rates[i].Amount) @Html.ValidationMessageFor(model => rates[i].Amount) </td> </tr> } <input type="submit" value="Save" /> } To summarize my problem, the below query in my view only works when the post comes from the submit button and not when it comes from my dropdownlist. @{var rates= Model.Rates.Where(a => a.PanelID == ViewBag.PanelID).OrderBy(a => a.minCount).ToList();}

    Read the article

  • Object model design: collections on classes

    - by Luke Puplett
    Hi all, Consider Train.Passengers, what type would you use for Passengers where passengers are not supposed to be added or removed by the consuming code? I'm using .NET Framework, so this discussion would suit .NET, but it could apply to a number of modern languages/frameworks. In the .NET Framework, the List is not supposed to be publicly exposed. There's Collection and ICollection and guidance, which I tend to agree with, is to return the closest concrete type down the inheritance tree, so that'd be Collection since it is already an ICollection. But Collection has read/write semantics and so possibly it should be a ReadOnlyCollection, but its arguably common sense not to alter the contents of a collection that you don't have intimate knowledge about so is it necessary? And it requires extra work internally and can be a pain with (de)serialization. At the extreme ends I could just return Person[] (since LINQ now provides much of the benefits that previously would have been afforded by a more specified collection) or even build a strongly-typed PersonCollection or ReadOnlyPersonCollection! What do you do? Thanks for your time. Luke

    Read the article

  • Usage of repository between EF model and code consumer

    - by jim
    I have binary data in my database that I'll have to convert to bitmap at some point. I was thinking whether or not it's appropriate to use a repository and do it there. My consumer, which is a presentation layer, will use this repository. For example: // This is a class I created for modeling the item as is. public class RealItem { public string Name { get; set; } public Bitmap Image { get; set; } } public abstract class BaseRepository { //using Unity (http://unity.codeplex.com) to inject the dependancy of entity context. [Dependency] public Context { get; set; } } public calss ItemRepository : BaseRepository { public List<Items> Select() { IEnumerable<Items> items = from item in Context.Items select item; List<RealItem> lst = new List<RealItem>(); foreach(itm in items) { MemoryStream stream = new MemoryStream(itm.Image); Bitmap image = (Bitmap)Image.FromStream(stream); RealItem ritem = new RealItem{ Name=item.Name, Image=image }; lst.Add(ritem); } return lst; } } Is this a correct way to use the repository pattern? I'm learning this pattern and I've seen a lot of examples online that are using a repository but when I looked at their source code... for example: public IQueryable<object> Select { return from q in base.Context select q; } as you can see no behavior is added to the system by their approach, so I was confused that maybe repository is something else and I got it all wrong. At the end there should be extra benifits of using them right?

    Read the article

  • How do i approach this collision model?

    - by PeeS
    this is the game level prototype i have already implemented. It has few objects per room to allow me to finally add some collision detection/response code into it. VIDEO As you can probably see, every object inside has it's own AABB, even the room itself has AABB. So a player is like 'inside the Room AABB'. My player will be exactly inside the room, so he would have to collide correctly with those AABBs, so that when he hits any of those objects inside he get's a proper collision response from those AABB's. Now i would like to hear from you what kind of collision approach should i choose in here? How do i approach this kind of stuff: AABB to AABB collision detection then when this is positive go with AABB - Tri to find proper plane normal and calculate response ? AABB to AABB then when positive go with AABB - AABB Side check to find proper proper plane normal and calculate response? Anything else? How do you do this ? Many thanks.

    Read the article

  • Platform Builder: Building Cloned Code from Multiple OS Versions

    - by Bruce Eitman
    My career goal is to delete more code than I write, and so far I have been fairly successful. But of course once in a while I need to clone code from the public tree which is contrary to my goal. Usually what follows is a new OS release. To help reach my goal, my team uses the same BSP code for multiple versions of the OS. That means that we need to handle the cloned code so that the correct code builds for the OS version that we are working on. To handle this we could use SKIPBUILD in the sources file, but that gets messy if the cloned code contains multiple folders. The solution that we use is to have a parent folder with subfolders that contain the OS version number. Example: PM |-PM500 |-PM600 |-PM700 The version number corresponds to the environment variable _WINCEOSVER. Then we have a simple DIRS file in the parent folder: DIRS=PM$( _WINCEOSVER) Which automatically selects the folder that goes with the OS version that we are building.   Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Lightweight PHP/HTML/CSS editor with code browser

    - by Nisto
    I'm looking for a freeware editor which has; syntax highlighting and a code browser (or code suggestions/hints). Preferably freeware license! I've tried out quite a few editors, but a lot of them are unfortunately very resource heavy and provides a lot more functions than I ever needed. So far, there's two editors that I really like, and is lightweight: jEdit and Notepad++. Although, unfortunately... Notepad++ doesn't have code browser support for both control structures and functions for PHP. Also, there's no code browser for HTML... I really liked jEdit as well, but there doesn't seem to be a code browser for it. Except for maybe Completion, but it's a bothersome plugin, and doesn't show the code browser unless you type something in and press CTRL+B. Other editors I've tried, but wasn't satisfied with: Adobe Dreamweaver CodeLobster PHP Edition Aptana Studio Komodo Edit EditPlus BlueFish PHP Designer 2007 - Personal PhpStorm Scriptly Eclipse UltraEdit Notepad2 EditPad Pro Rapid PHP EDIT I'm using Windows XP

    Read the article

  • How does whitespace affect Python code?

    - by Codereview
    I've started programming about a year ago, I've learned the C and C++ languages and bits of Java. Recently I've started to learn the Python language (Notable: I'm using the Eclipse IDE). I'm used to formatting my code with whitespace, placing statements a bit to the right of my code for easier readability. Since I started working with Python it seems whitespace is a problem, I get some unnecessary whitespace warnings, and my code gets underlined (In eclipse). After a while I figured Python is very restrictive about whitespace for some reason, so I've been looking for the effects of whitespace on Python code. How does it affect the code? Does the code work different with unnecessary whitespace?

    Read the article

  • Why is design by contract considered an alternative to the pseudo programming process?

    - by zoopp
    Right now I'm reading Code Complete by Steve McConnell and in chapter 9 he talks about the Pseudo Programming Process (PPP). From what I've understood, the PPP is a way of programming in which the programmer first writes the pseudo code for the routine he's working on, then refines it up to the point where pretty much each pseudo code line can be implemented in 1-3 lines of code, then writes the code in the designated programming language and finally the pseudo code is saved as comments for the purpose of documenting the routine. In chapter 9.4 the author mentions alternatives to the PPP, one of which is 'design by contract'. In design by contract you basically assert preconditions and postconditions of each routine. Now why would that be considered an alternative? To me it seems obvious that I should use both techniques at the same time and not chose one over the other.

    Read the article

  • Code Reuse is (Damn) Hard

    - by James Michael Hare
    Being a development team lead, the task of interviewing new candidates was part of my job.  Like any typical interview, we started with some easy questions to get them warmed up and help calm their nerves before hitting the hard stuff. One of those easier questions was almost always: “Name some benefits of object-oriented development.”  Nearly every time, the candidate would chime in with a plethora of canned answers which typically included: “it helps ease code reuse.”  Of course, this is a gross oversimplification.  Tools only ease reuse, its developers that ultimately can cause code to be reusable or not, regardless of the language or methodology. But it did get me thinking…  we always used to say that as part of our mantra as to why Object-Oriented Programming was so great.  With polymorphism, inheritance, encapsulation, etc. we in essence set up the concepts to help facilitate reuse as much as possible.  And yes, as a developer now of many years, I unquestionably held that belief for ages before it really struck me how my views on reuse have jaded over the years.  In fact, in many ways Agile rightly eschews reuse as taking a backseat to developing what's needed for the here and now.  It used to be I was in complete opposition to that view, but more and more I've come to see the logic in it.  Too many times I've seen developers (myself included) get lost in design paralysis trying to come up with the perfect abstraction that would stand all time.  Nearly without fail, all of these pieces of code become obsolete in a matter of months or years. It’s not that I don’t like reuse – it’s just that reuse is hard.  In fact, reuse is DAMN hard.  Many times it is just a distraction that eats up architect and developer time, and worse yet can be counter-productive and force wrong decisions.  Now don’t get me wrong, I love the idea of reusable code when it makes sense.  These are in the few cases where you are designing something that is inherently reusable.  The problem is, most business-class code is inherently unfit for reuse! Furthermore, the code that is reusable will often fail to be reused if you don’t have the proper framework in place for effective reuse that includes standardized versioning, building, releasing, and documenting the components.  That should always be standard across the board when promoting reusable code.  All of this is hard, and it should only be done when you have code that is truly reusable or you will be exerting a large amount of development effort for very little bang for your buck. But my goal here is not to get into how to reuse (that is a topic unto itself) but what should be reused.  First, let’s look at an extension method.  There’s many times where I want to kick off a thread to handle a task, then when I want to reign that thread in of course I want to do a Join on it.  But what if I only want to wait a limited amount of time and then Abort?  Well, I could of course write that logic out by hand each time, but it seemed like a great extension method: 1: public static class ThreadExtensions 2: { 3: public static bool JoinOrAbort(this Thread thread, TimeSpan timeToWait) 4: { 5: bool isJoined = false; 6:  7: if (thread != null) 8: { 9: isJoined = thread.Join(timeToWait); 10:  11: if (!isJoined) 12: { 13: thread.Abort(); 14: } 15: } 16: return isJoined; 17: } 18: } 19:  When I look at this code, I can immediately see things that jump out at me as reasons why this code is very reusable.  Some of them are standard OO principles, and some are kind-of home grown litmus tests: Single Responsibility Principle (SRP) – The only reason this extension method need change is if the Thread class itself changes (one responsibility). Stable Dependencies Principle (SDP) – This method only depends on classes that are more stable than it is (System.Threading.Thread), and in itself is very stable, hence other classes may safely depend on it. It is also not dependent on any business domain, and thus isn't subject to changes as the business itself changes. Open-Closed Principle (OCP) – This class is inherently closed to change. Small and Stable Problem Domain – This method only cares about System.Threading.Thread. All-or-None Usage – A user of a reusable class should want the functionality of that class, not parts of that functionality.  That’s not to say they most use every method, but they shouldn’t be using a method just to get half of its result. Cost of Reuse vs. Cost to Recreate – since this class is highly stable and minimally complex, we can offer it up for reuse very cheaply by promoting it as “ready-to-go” and already unit tested (important!) and available through a standard release cycle (very important!). Okay, all seems good there, now lets look at an entity and DAO.  I don’t know about you all, but there have been times I’ve been in organizations that get the grand idea that all DAOs and entities should be standardized and shared.  While this may work for small or static organizations, it’s near ludicrous for anything large or volatile. 1: namespace Shared.Entities 2: { 3: public class Account 4: { 5: public int Id { get; set; } 6:  7: public string Name { get; set; } 8:  9: public Address HomeAddress { get; set; } 10:  11: public int Age { get; set;} 12:  13: public DateTime LastUsed { get; set; } 14:  15: // etc, etc, etc... 16: } 17: } 18:  19: ... 20:  21: namespace Shared.DataAccess 22: { 23: public class AccountDao 24: { 25: public Account FindAccount(int id) 26: { 27: // dao logic to query and return account 28: } 29:  30: ... 31:  32: } 33: } Now to be fair, I’m not saying there doesn’t exist an organization where some entites may be extremely static and unchanging.  But at best such entities and DAOs will be problematic cases of reuse.  Let’s examine those same tests: Single Responsibility Principle (SRP) – The reasons to change for these classes will be strongly dependent on what the definition of the account is which can change over time and may have multiple influences depending on the number of systems an account can cover. Stable Dependencies Principle (SDP) – This method depends on the data model beneath itself which also is largely dependent on the business definition of an account which can be very inherently unstable. Open-Closed Principle (OCP) – This class is not really closed for modification.  Every time the account definition may change, you’d need to modify this class. Small and Stable Problem Domain – The definition of an account is inherently unstable and in fact may be very large.  What if you are designing a system that aggregates account information from several sources? All-or-None Usage – What if your view of the account encompasses data from 3 different sources but you only care about one of those sources or one piece of data?  Should you have to take the hit of looking up all the other data?  On the other hand, should you have ten different methods returning portions of data in chunks people tend to ask for?  Neither is really a great solution. Cost of Reuse vs. Cost to Recreate – DAOs are really trivial to rewrite, and unless your definition of an account is EXTREMELY stable, the cost to promote, support, and release a reusable account entity and DAO are usually far higher than the cost to recreate as needed. It’s no accident that my case for reuse was a utility class and my case for non-reuse was an entity/DAO.  In general, the smaller and more stable an abstraction is, the higher its level of reuse.  When I became the lead of the Shared Components Committee at my workplace, one of the original goals we looked at satisfying was to find (or create), version, release, and promote a shared library of common utility classes, frameworks, and data access objects.  Now, of course, many of you will point to nHibernate and Entity for the latter, but we were looking at larger, macro collections of data that span multiple data sources of varying types (databases, web services, etc). As we got deeper and deeper in the details of how to manage and release these items, it quickly became apparent that while the case for reuse was typically a slam dunk for utilities and frameworks, the data access objects just didn’t “smell” right.  We ended up having session after session of design meetings to try and find the right way to share these data access components. When someone asked me why it was taking so long to iron out the shared entities, my response was quite simple, “Reuse is hard...”  And that’s when I realized, that while reuse is an awesome goal and we should strive to make code maintainable, often times you end up creating far more work for yourself than necessary by trying to force code to be reusable that inherently isn’t. Think about classes the times you’ve worked in a company where in the design session people fight over the best way to implement a class to make it maximally reusable, extensible, and any other buzzwordable.  Then think about how quickly that design became obsolete.  Many times I set out to do a project and think, “yes, this is the best design, I can extend it easily!” only to find out the business requirements change COMPLETELY in such a way that the design is rendered invalid.  Code, in general, tends to rust and age over time.  As such, writing reusable code can often be difficult and many times ends up being a futile exercise and worse yet, sometimes makes the code harder to maintain because it obfuscates the design in the name of extensibility or reusability. So what do I think are reusable components? Generic Utility classes – these tend to be small classes that assist in a task and have no business context whatsoever. Implementation Abstraction Frameworks – home-grown frameworks that try to isolate changes to third party products you may be depending on (like writing a messaging abstraction layer for publishing/subscribing that is independent of whether you use JMS, MSMQ, etc). Simplification and Uniformity Frameworks – To some extent this is similar to an abstraction framework, but there may be one chosen provider but a development shop mandate to perform certain complex items in a certain way.  Or, perhaps to simplify and dumb-down a complex task for the average developer (such as implementing a particular development-shop’s method of encryption). And what are less reusable? Application and Business Layers – tend to fluctuate a lot as requirements change and new features are added, so tend to be an unstable dependency.  May be reused across applications but also very volatile. Entities and Data Access Layers – these tend to be tuned to the scope of the application, so reusing them can be hard unless the abstract is very stable. So what’s the big lesson?  Reuse is hard.  In fact it’s damn hard.  And much of the time I’m not convinced we should focus too hard on it. If you’re designing a utility or framework, then by all means design it for reuse.  But you most also really set down a good versioning, release, and documentation process to maximize your chances.  For anything else, design it to be maintainable and extendable, but don’t waste the effort on reusability for something that most likely will be obsolete in a year or two anyway.

    Read the article

  • Five C# Code Snippets

    A snippet is a small section of text or source code that can be inserted into the code of a program. Snippets provide an easy way to implement commonly used code or functions into a larger section of code. Instead of rewriting the same code over and over again, a programmer can save the code [...] Related posts:How To Obtain Environment Details With .NET 3.5 How-to: Easily Send Emails With .NET Understanding SMTP Status Codes ...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Resources for popular domain models

    - by Songo
    I have come across many situations where I had to build a system for a library or a clinic or other popular domains. The thing is a domain model for a library was probably done 1000 times already with different level of details of course. Here is an example. Is there a popular website or community where one can find ready made domain models for popular systems? The whole purpose I'm trying to achieve is to quickly get a grasp of the domain I'm modeling and customize it to my needs. Re-inventing the wheel seems really absurd when the same system might have been modeled properly previously. Note I know Google might sound like the perfect source, but there is a repository out there that people can post there models, so that others can share them.

    Read the article

  • Does a prose to code compiler exist?

    - by Raynos
    I have seen some horrible code in my time including people virtually duplicating the code in comments // add 4 to x x+=4; // for each i in 0 to 9 for (int i = 0; i < 10; i++) { // multiply x by i x *= i; } Taking this concept further, I'm curious whether prose to code compilers exist. Is there a valid use case for English prose to code? Do compilers exist that do this? The distinction between this and auto generated code, is that auto generated code is generally always a subset of a project. Can we have complete projects auto generated from english prose? I realise that this might overlap with the concept of declarative languages.

    Read the article

  • why not use unmanaged safe code in c#

    - by user613326
    There is an option in c# to execute code unchecked. It's generally not advised to do so, as managed code is much safer and it overcomes a lot of problems. However I am wondering, if you're sure your code won't cause errors, and you know how to handle memory then why (if you like fast code) follow the general advice? I am wondering this since I wrote a program for a video camera, which required some extremely fast bitmap manipulation. I made some fast graphical algorithms myself, and they work excellent on the bitmaps using unmanaged code. Now I wonder in general, if you're sure you don't have memory leaks, or risks of crashes, why not use unmanaged code more often ? PS my background: I kinda rolled into this programming world and I work alone (I do so for a few years) and so I hope this software design question isn't that strange. I don't really have other people out there like a teacher to ask such things.

    Read the article

  • Releasing a project under GPL v2 or later without the source code of libraries

    - by Luciano Silveira
    I wrote a system in Java that I want to release under the terms of GPL v2 or later. I've used Apache Maven to deal with all the dependencies of the system, so I don't have the source code of any of the libraries used. I've already checked, all the libraries were released under GPL-compatible licenses (Apache v2, 3-clause BSD, MIT, LGPL v2 and v2.1). I have 3 questions about this scenario: 1) Can I release a package with only the binaries of code I wrote, not including the libraries, and distribute only the source code I wrote? 2) Can I release a package with all the binaries, including the libraries, and distribute only the source code I wrote? 3) Can I release a package with all the binaries, including the libraries, and distribute only the source code I wrote plus the source code of the libraries licensed under the LGPL license?

    Read the article

  • How do you handle measuring Code Coverage in JavaScript

    - by Dancrumb
    In order to measure Code Coverage for JavaScript unit tests, one needs to instrument the code, run the tests and then perform post-processing. My concern is that, as a result, you are unit testing code that will never be run in production. Since JavaScript isn't compiled, what you test should be precisely what you execute. So here's my question, how do you handle this? One thought I had was to run Unit Testing on the production code and use that for my pass fail. I would then create a shadow of my production code, with instrumentation and run my unit tests again; this would give me my code coverage stats. Has anyone come across a method that is a little more graceful than this?

    Read the article

  • Upgrading to Code Based Migrations EF 4.3.1 with Connector/Net 6.6

    - by GABMARTINEZ
    Entity Framework 4.3.1 includes a new feature called code first migrations.  We are adding support for this feature in our upcoming 6.6 release of Connector/Net.  In this walk-through we'll see the workflow of code-based migrations when you have an existing application and you would like to upgrade to this EF 4.3.1 version and use this approach, so you can keep track of the changes that you do to your database.   The first thing we need to do is add the new Entity Framework 4.3.1 package to our application. This should via the NuGet package manager.  You can read more about why EF is not part of the .NET framework here. Adding EF 4.3.1 to our existing application  Inside VS 2010 go to Tools -> Library Package Manager -> Package Manager Console, this will open the Power Shell Host Window where we can work with all the EF commands. In order to install this library to your existing application you should type Install-Package EntityFramework This will make some changes to your application. So Let's check them. In your .config file you'll see a  <configSections> which contains the version you have from EntityFramework and also was added the <entityFramework> section as shown below. This section is by default configured to use SQL Express which won't be necesary for this case. So you can comment it out or leave it empty. Also please make sure you're using the Connector/Net 6.6.x version which is the one that has this support as is shown in the previous image. At this point we face one issue; in order to be able to work with Migrations we need the __MigrationHistory table that we don't have yet since our Database was created with an older version. This table is used to keep track of the changes in our model. So we need to get it in our existing Database. Getting a Migration-History table into an existing database First thing we need to do to enable migrations in our existing application is to create our configuration class which will set up the MySqlClient Provider as our SQL Generator. So we have to add it with the following code: using System.Data.Entity.Migrations;     //add this at the top of your cs file public class Configuration : DbMigrationsConfiguration<NameOfYourDbContext>  //Make sure to use the name of your existing DBContext { public Configuration() { this.AutomaticMigrationsEnabled = false; //Set Automatic migrations to false since we'll be applying the migrations manually for this case. SetSqlGenerator("MySql.Data.MySqlClient", new MySql.Data.Entity.MySqlMigrationSqlGenerator());     }   }  This code will set up our configuration that we'll be using when executing all the migrations for our application. Once we have done this we can Build our application so we can check that everything is fine. Creating our Initial Migration Now let's add our Initial Migration. In Package Manager Console, execute "add-migration InitialCreate", you can use any other name but I like to set this as our initial create for future reference. After we run this command, some changes were done in our application: A new Migrations Folder was created. A new class migration call InitialCreate which in most of the cases should have empty Up and Down methods as long as your database is up to date with your Model. Since all your entities already exists, delete all duplicated code to create any entity which exists already in your Database if there is any. I found this easier when you don't have any pending updates to do to your database. Now we have our empty migration that will make no changes in our database and represents how are all the things at the begining of our migrations.  Finally, let's create our MigrationsHistory table. Optionally you can add SQL code to delete the edmdata table which is not needed anymore. public override void Up() { // Just make sure that you used 4.1 or later version         Sql("DROP TABLE EdmMetadata"); } From our Package Manager Console let's type: Update-database; If you like to see the operations made on each Update-database command you can use the flag -verbose after the Update-database. This will make two important changes.  It will execute the Up method in the initial migration which has no changes in the database. And second, and very important,  it will create the __MigrationHistory table necessary to keep track of your changes. And next time you make a change to your database it will compare the current model to the one stored in the Model Column of this table. Conclusion The important thing of this walk through is that we must create our initial migration before we start doing any changes to our model. This way we'll be adding the necessary __MigrationsHistory table to our existing database, so we can keep our database up to date with all the changes we do in our context model using migrations. Hope you have found this information useful. Please let us know if you have any questions or comments, also please check our forums here where we keep answering questions in general for the community.  Happy MySQL/Net Coding!

    Read the article

  • What is testable code?

    - by Michael Freidgeim
    We are improving quality of code and trying to develop more unit tests. The question that developers asked  was  "How to make code testable ?"  From http://openmymind.net/2010/8/17/Write-testable-code-even-if-you-dont-write-tests/ First and foremost, its loosely coupled, taking advantage of dependency injection (and auto-wiring), composition and interface-programming. Testable code is also readable - meaning it leverages single responsibility principle and Liskov substitution principle.A few practical suggestions are listed in http://misko.hevery.com/code-reviewers-guide/More recommendations are in http://googletesting.blogspot.com/2008/08/by-miko-hevery-so-you-decided-to.htmlIt is slightly too theoretical - " the trick is translating these abstract concepts into concrete decisions in your code."

    Read the article

  • Un espace de revue de code a ouvert ses portes dans la rubrique Qt, venez participer

    Bonjour à tous, Suite à une certaine demande après le défi, il nous a semblé utile d'organiser quelque peu une revue de code Qt. En deux mots, de quoi s'agit-il ? Des développeurs plus expérimentés lisent le code d'autres développeurs et le commentent : ceci aurait été mieux d'une autre manière, ce commentaire ne veut rien dire, ce pavé de code devrait être réécrit, etc. Des remarques sur le fond et la forme du code, sur son organisation, les patrons de conception utilisés, les concepts inhérents à Qt et/ou au C++ mal compris ou mal appliqués, etc. L'objectif est de confronter les opinions sur un code pour qu'au final tout le monde y gagne. Pour l'organisation, autant faire simple : pour ceux qui souhaitent une revue de code, créez un ...

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >