Search Results

Search found 36619 results on 1465 pages for 'damn small linux'.

Page 67/1465 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• Corosync :: Restarting some resources after Lan connectivity issue

  - by moebius_eye

  I am currently looking into corosync to build a two-node cluster. So, I've got it working fine, and it does what I want to do, which is: Lost connectivity between the two nodes gives the first node '10node' both Failover Wan IPs. (aka resources WanCluster100 and WanCluster101 ) '11node' does nothing. He "thinks" he still has his Failover Wan IP. (aka WanCluster101) But it doesn't do this: '11node' should restart the WanCluster101 resource when the connectivity with the other node is back. This is to prevent a condition where node10 simply dies (and thus does not get 11node's Failover Wan IP), resulting in a situation where none of the nodes have 10node's failover IP because 10node is down 11node has "given back" his failover Wan IP. Here's the current configuration I'm working on. node 10sch \ attributes standby="off" node 11sch \ attributes standby="off" primitive LanCluster100 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.100" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive LanCluster101 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.101" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive Ping100 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive Ping101 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive WanCluster100 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.100" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive WanCluster101 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.101" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive Website0 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf" options="-DSSL" \ operations $id="Website-one" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" primitive Website1 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf.1" options="-DSSL" \ operations $id="Website-two" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" group All100 WanCluster100 LanCluster100 group All101 WanCluster101 LanCluster101 location AlwaysPing100WithNode10 Ping100 \ rule $id="AlWaysPing100WithNode10-rule" inf: #uname eq 10sch location AlwaysPing101WithNode11 Ping101 \ rule $id="AlWaysPing101WithNode11-rule" inf: #uname eq 11sch location NeverLan100WithNode11 LanCluster100 \ rule $id="RAND1083308" -inf: #uname eq 11sch location NeverPing100WithNode11 Ping100 \ rule $id="NeverPing100WithNode11-rule" -inf: #uname eq 11sch location NeverPing101WithNode10 Ping101 \ rule $id="NeverPing101WithNode10-rule" -inf: #uname eq 10sch location Website0NeedsConnectivity Website0 \ rule $id="Website0NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 location Website1NeedsConnectivity Website1 \ rule $id="Website1NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 colocation Never -inf: LanCluster101 LanCluster100 colocation Never2 -inf: WanCluster100 LanCluster101 colocation NeverBothWebsitesTogether -inf: Website0 Website1 property $id="cib-bootstrap-options" \ dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1408954702" \ maintenance-mode="false" rsc_defaults $id="rsc-options" \ resource-stickiness="100" \ migration-threshold="3" I also have a less important question concerning this line: colocation NeverBothLans -inf: LanCluster101 LanCluster100 How do I tell it that this collocation only applies to '11node'.

  Read the article

• What Linux platform is Ubuntu Server

  - by Graeme

  I'm just trying to get an old HP ML150 up and running to learn on. I've installed ubuntu server on it and have found the drivers are all not installed. HP has drivers but I have no clue what platform to download.This is what I have to choose from. » Novell NetWare 6.5 » Red Hat Enterprise Linux 4 (AMD64/EM64T) » Red Hat Enterprise Linux 4 (x86) » Red Hat Enterprise Linux 5 Server (x86) » Red Hat Enterprise Linux 5 Server (x86-64) » SCO OpenServer 5 » SCO OpenServer 6 » SCO UnixWare 7 » SUSE Linux Enterprise Server 10 (AMD64/EM64T) » SUSE Linux Enterprise Server 10 (x86) » SUSE Linux Enterprise Server 9 (AMD64/EM64T) » SUSE Linux Enterprise Server 9 (x86) Any suggestions? Thank you in advance guys for your help.

  Read the article

• Munin "Available entropy" when using address space layout randomization

  - by clawspoon

  Having just configured munin for statistics logging on my gentoo server (hardened profile), I am noticing that my "Available entropy" is consitently in the 200-300 range. This seems way to low, so I checked it manually using the command $ cat /proc/sys/kernel/random/entropy_avail 3544 Odd. Consistently very low values in Munin and practically filled up when checking manually. After thinking about the problem for a while I came to the conclusion that the problem is probably that I'm using Adress Space Layout Randomization which is using the entropy when running commands/programs. Since Munin runs a whole slew of programs all the entropy is used up, and Munin then measures how much entropy there is, resulting in the low values. Does anyone have any experience with this? How can this be avoided?

  Read the article

• Same netmask or /32 for secondary IP on Linux

  - by derobert

  There appear to be (at least) two ways to add a secondary IP address to an interface on Linux. By secondary, I mean that it'll accept traffic to the IP address, and responses to connections made to that IP will use it as a source, but any traffic the box originates (e.g., an outgoing TCP connection) will not use the secondary address. Both ways start with adding the primary address, e.g., ip addr add 172.16.8.10/24 dev lan. Then I can add the secondary address with either a netmask of /24 (matching the primary) or /32. If I add it with a /24, it gets flagged secondary, so will not be used as the source of outgoing packets, but that leaves a risk of the two addresses being added in the wrong order by mistake. If I add it with /32, wrong order can't happen, but it doesn't get flagged as secondary, and I'm not sure what the bad effects of that may be. So, I'm wondering, which approach is least likely to break? (If it matters, the main service on this machine is MySQL, but it also runs NFSv3. I'm adding a second machine as a warm standby, and hope to switch between them by changing which owns the secondary IP.)

  Read the article

• SEO Services For Small Business - Is it Necessary?

  Whether your small business started out on the Internet or started a while back at your kitchen table and is only now moving online, the web is the only place to be if you intend your small business to succeed and grow. With thousands of new users "coming online" every day, a web presence is a must for small business, and that web presence has to be noticed if you want to stay in business at all. And for that, you're going to need good SEO - Search Engine Optimization.

  Read the article

• linux: mount old ATA disk to USB adapter

  - by 130490868091234

  I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic Corp. SL11R-IDE IDE Bridge (04ce:0002), an ATA adapter to USB 1.0 like the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. I get different devices under, for example: /dev/bus/usb/003/002 or /dev/bus/usb/002/004, but I don't get any /dev/sdbN links. The output blkid -o list -c /dev/null is just the laptop's partitions. I have tried taking out the jumper, putting it as master and as CS Enabled, but didn't change the result. Any ideas?

  Read the article

• Ubuntu: disable udev's persistent-net-generator.rules

  - by Luke404

  I'm using Ubuntu 12.04 LTS server edition and I am modifying /etc/udev/rules.d/70-persistent-net.rules to define my own mappings of ethernet interfaces to MAC addresses; that file is initially generated by rules in /lib/udev/rules.d/75-persistent-net-generator.rules at system installation time (or at the first boot, I actually don't know and it doesn't matter here). How can I be sure that my edited version will never ever be overwritten by anything? Removing the persistent-net-generator, as suggested on some websites, is not the Right Thing™ to do as told by comments in the file itself: it will be overwritten by any update of the udev package. I'm looking for a more formally correct way to disable it. Is it enough to just make sure that /etc/udev/rules.d/70-persistent-net.rules does exist? Maybe there are other events that could trigger its regeneration? (eg. adding or removing ethernet interfaces to the system?)

  Read the article

• Pip installs on Archlinux fails to build egg

  - by stmfunk

  I was trying to install nltk on my Archlinux server but it repeatedly fails with the following error output /usr/lib/python3.3/distutils/dist.py:257: UserWarning: Unknown distribution option: 'entry_points' warnings.warn(msg) /usr/lib/python3.3/distutils/dist.py:257: UserWarning: Unknown distribution option: 'zip_safe' warnings.warn(msg) /usr/lib/python3.3/distutils/dist.py:257: UserWarning: Unknown distribution option: 'test_suite' warnings.warn(msg) usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...] or: setup.py --help [cmd1 cmd2 ...] or: setup.py --help-commands or: setup.py cmd --help error: invalid command 'bdist_egg' /tmp/pip_build_root/nltk/distribute-0.6.21-py3.3.egg Traceback (most recent call last): File "./distribute_setup.py", line 143, in use_setuptools raise ImportError ImportError During handling of the above exception, another exception occurred: Traceback (most recent call last): File "", line 16, in File "/tmp/pip_build_root/nltk/setup.py", line 23, in distribute_setup.use_setuptools() File "./distribute_setup.py", line 145, in use_setuptools return _do_download(version, download_base, to_dir, download_delay) File "./distribute_setup.py", line 125, in _do_download _build_egg(egg, tarball, to_dir) File "./distribute_setup.py", line 116, in _build_egg raise IOError('Could not build the egg.') OSError: Could not build the egg. ---------------------------------------- Cleaning up... Command python setup.py egg_info failed with error code 1 in /tmp/pip_build_root/nltk Storing complete log in /root/.pip/pip.log This error is also occurring for matplotlib buts thats the only other library I found it to fail on so far. pyyaml installs fine. The install works perfectly under virtualenv on my mac which is using python 2.7 but the server is using python 3.3. Any help is appreciated.

  Read the article

• How do I uncompress vmlinuz to vmlinux?

  - by Lord Loh.

  I have already tried uncompress, gzip, and all other solutions that come up as google results and these have not worked for me. To get just the image search for the GZ signature - 1f 8b 08 00. > od -A d -t x1 vmlinuz | grep '1f 8b 08 00' 0024576 24 26 27 00 ae 21 16 00 1f 8b 08 00 7f 2f 6b 45 so the image begins at 24576+8 => 24584. Then just copy the image from the point and decompress it - > dd if=vmlinuz bs=1 skip=24584 | zcat > vmlinux 1450414+0 records in 1450414+0 records out 1450414 bytes (1.5 MB) copied, 6.78127 s, 214 kB/s Got these instructions verbatim from a forum online: http://www.codeguru.com/forum/showthread.php?t=415186 This process does not work for me and end up giving errors that states file not found 0024576 and all subsequent numbers. How do I proceed extracting vmlinux from vmlinuz? Thank you. EDITED: This is a reverse engineering question. I have no access to the distro to install any RPM or recompile. I start with nothing but vmlinuz.

  Read the article

• Linux - preventing an application from failing due to lack of disk space [migrated]

  - by Jernej

  Due to an unpredicted scenario I am currently in need of finding a solution to the fact that an application (which I do not wish to kill) is slowly hogging the entire disk space. To give more context I have an application in Python that uses multiprocessing.Pool to start 5 threads. Each thread writes some data to its own file. The program is running on Linux and I do not have root access to the machine. The program is CPU intensive and has been running for months. It still has a few days to write all the data. 40% of the data in the files is redundant and can be removed after a quick test. The system on which the program is running only has 30GB of remaining disk space and at the current rate of work it will surely be hogged before the program finishes. Given the above points I see the following solutions with respective problems Given that the process number i is writing to file_i, is it safe to move file_i to an external location? Will the OS simply create a new instance of file_i and write to it? I assume moving the file would remove it and the process would end up writing to a "dead" file? Is there a "command line" way to stop 4 of the 5 spawned workers and wait until one of them finishes and then resume their work? (I am sure one single worker thread would avoid hogging the disk) Suppose I use CTRL+Z to freeze the main process. Will this stop all the other processes spawned by multiprocessing.Pool? If yes, can I then safely edit the files as to remove the redundant lines? Given the three options that I see, would any of them work in this context? If not, is there a better way to handle this problem? I would really like to avoid the scenario in which the program crashes just few days before its finish.

  Read the article

• Linux VLAN Bridge

  - by raspi

  I have home network with VLANs, one for LAN, one for WLAN and one for internet. I'd like to use bridging so that instead of configuring these same VLANs to every machine, they had own VLAN ID and bridges were LAN, WLAN and internet. I've tried it but for some reason keep-alive/ttl seems to get broken because SSH sessions etc suddenly disconnects. We have this same setup working in workplace for 4+ years with 100+ customers but it's custom firewall/router hardware so accessing it is impossible. I know that it runs Linux. So what is Debian/Ubuntu default network settings doing wrong or is it just NIC driver/hw problem? I've tried to mess araund with ttl etc settings without any luck. The bad stuff is happening in the bridge because current VLAN-only setup works fine. interfaces: auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 allow-hotplug eth1 iface eth0 inet static iface eth1 inet static auto vlan111 auto vlan222 auto vlan333 auto vlan444 auto br0 auto br1 auto br2 # LAN iface vlan111 inet static vlan_raw_device eth0 # WLAN iface vlan222 inet static vlan_raw_device eth0 # ADSL Modem iface vlan333 inet static vlan_raw_device eth1 # Internet iface vlan444 inet static vlan_raw_device eth0 # LAN bridge iface br0 inet static address 192.168.0.1 netmask 255.255.255.0 bridge_ports eth0.111 bridge_stp on # Internet bridge iface br1 inet static address x.x.x.x netmask x.x.x.x gateway x.x.x.x bridge_ports eth1.333 eth0.444 bridge_stp on post-up iptables -t nat -A POSTROUTING -o br1 -j MASQUERADE pre-down iptables -t nat -D POSTROUTING -o br1 -j MASQUERADE # WLAN bridge iface br2 inet static address 192.168.1.1 netmask 255.255.255.0 bridge_ports eth0.222 bridge_stp on Sysctl: net.ipv4.conf.default.forwarding=1

  Read the article

• What can cause a kernel hang on redhat 4?

  - by Ivan Buttinoni

  I've to solve a nasty problem on a ten machine "cluster": randomly one of these machine hang during an hard computation, sometime still ping sometime not. The problem was described me at the phone, I've still no touch/see these machine, so I can't be more precise. It seem there's no (real) keyboard or monitor linked to them, so I haven't nothing about keyboard led or messages on monitor. Don't worry, what I really need is some suggestion where to search the problem, some suggestions on what can cause a kernel hang on a working machine. I also see this post, but seem same need on a different situation. My ideas since now: - HW problem (ram, cpu, fan etc.) - bad autofs configuration - bad nfs(?) configuration - presence of a trojan/hacker/etc - /dev/"swap" linked to /dev/zero - kernel out of memory(??) - kernel bugged In other words I try to imagine what kind of envent can occour that can crash the kernel insted of the application that generate the event. What hang have YOU experienced before? Write it to me! TIA

  Read the article

• Playing sound on server using php

  - by Lorenz

  I want to play a sound file on my server using PHP. The PHP script is called by Apache and runs under the user 'nobody', which has by default no access to the speakers. So I created a new user soundoutput which is allowed do play sound and has read permissions for the sound files he should play. If I'm logged in as root, I can play a sound file using echo password | sudo -Su soundoutput mpg321 '/path/to/sound.mp3'. The problem is, that it doesn't work when I'm executing this command using PHP's system_exec. I guess that user nobody isn't allowed to run sudo, but what can I do that he is allowed to do that? Any help appreciated.

  Read the article

• Linux: Send mail to external mail box from a server with that user's hostname

  - by dtbarne

  I've got sendmail running on a linux box. Let's say the hostname of the box is bar.com. If I run the following command, I don't receive the email (which is hosted with a third party), presumably due to the hostname pointing to the local machine. echo "Test Body" | mail -s "Test Subject" [email protected] Is there any way to get this to work so that I can receive emails at my third party email address even though it has the same hostname? Do I have to change the hostname of this server (not preferred)? It may be worth noting that I created a user "foo" on my machine and noticed that the mailbox for that account is empty. I noticed these log entries, which may or may not be relevant: Jun 28 01:09:48 bar sendmail[14338]: p5S59min014338: from=apache, size=80, class=0, nrcpts=1, msgid=<[email protected]>, relay=apache@localhost Jun 28 01:09:48 bar sendmail[14339]: p5S59mIA014339: from=<[email protected]>, size=293, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.$ Jun 28 01:09:48 bar sendmail[14338]: p5S59min014338: [email protected], ctladdr=apache (48/48), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30080, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (p5S59mIA$ Jun 28 01:09:48 bar sendmail[14340]: p5S59mIA014339: to=<[email protected]>, ctladdr=<[email protected]> (48/48), delay=00:00:00, xdelay=00:00:00, mailer=local, pri=30495, dsn=2.0.0, stat=Sent

  Read the article

• Connect linux server to VPN server via PPTP

  - by wowpatrick

  I'm trying to connect a Linux (Ubuntu 10.04 LST) server to a VPN server via the PPTP client to an VPN server. I configured the PPTP client as said in the documentation. The connection is correctly added as an interface, but somehow the connection dose not work. ping -I ppp0 google.com dose not return anything and traceroute -i ppp0 only shows the first hop, and then displays nothing. Any ideas of what is going wrong? Incorrect routing configuration? ifconfig output for the configured interface: ppp0 Link encap:Point-to-Point Protocol inet addr:xx.x.xxx.xxx P-t-P:10.0.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1496 Metric:1 RX packets:415 errors:0 dropped:0 overruns:0 frame:0 TX packets:468 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:31428 (31.4 KB) TX bytes:32394 (32.3 KB) route output Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xx.x.x.1 * 255.255.255.255 UH 0 0 0 ppp0 xx.xxx.xxx.xx sp.ip 255.255.255.255 UGH 0 0 0 eth1 192.168.3.0 * 255.255.255.0 U 0 0 0 eth2 192.168.2.0 * 255.255.255.0 U 0 0 0 eth1 default sp.ip 0.0.0.0 UG 100 0 0 eth1

  Read the article

• Live Screencast under Linux

  - by OmnipotentEntity

  I was having some difficulty with running a Live Screencast under Linux. I've found jtvlc and tried using that, but whenever I use it the stream comes out either blank or lagged with extremely high latency. I have a fast internet connection and a fast computer, but am I perhaps taxing it too much? Any ideas on what I could possibly be doing wrong? # 1. Get an account on http://www.justin.tv/ # 2. Copy streaming key from: http://www.justin.tv/broadcast/adv_other # 2. Install VLC: http://www.videolan.org/vlc/ # 3. Get Win/Mac/Lin Stream Client: \ # http://apiwiki.justin.tv/mediawiki/index.php/Linux_Broadcasting_API # 4. Adjust the vlc parameters to your liking and run VLC like this #!/bin/bash cvlc screen:// --input-slave=pulse:// \ --screen-width 1920 \ --screen-height 1080 \ --screen-fps 5 \ -v input_stream \ --sout='#duplicate{ dst="transcode{ scale=1, venc=x264{ keyint=60 }, vcodec=h264, vb=600, acodec=mp4a, ab=32, channels=2, samplerate=22050 } :rtp{dst=127.0.0.1,port=1234,sdp=file:///tmp/vlc.sdp} "}' \ --sout-transcode-threads=4 & sleep 2 # 5. Run JTVLC to stream like this: ./jtvlc/jtvlc omnipotententity censored /tmp/vlc.sdp # Notes: #- If you want to see what you're about to stream add 'dst=display, ' # before 'dst="transcode[' # More about the VLC parameters: http://wiki.videolan.org/Documentation:Modules/screen

  Read the article

• Active node stops resources when pasive node is shutdown

  - by Wakaru44

  2 nodes, active/pasive. 2 resources, a virtual ip, openLdap, and the nfs mount where openldap saves the data. When both nodes are up, things worked fine. You could move resources away and put the active in stanby. But when i rebooted the passive node, ( with the resources in the active node), and the passive node loses conectivity, all the resources in the active where stopped by pacemaker. I'm reading the documentation right now, but I just need a little quick tip to figure what could be hapenning here. Im using: corosync pacemaker RHEL 6

  Read the article

• Machine only responds to network requests from machines it is pinging

  - by ILikeFood

  I have two machines. WOPR: Ubuntu server edition 10.10 LTS 32 bit Adam Selene: Windows 7 home premium 64 bit / Ubuntu Desktop 10.10 LTS 64 bit I want to be able to SSH from Adam Selene to WOPR, so I connect them to the same network. Here's where things get weird. I cannot connect to WOPR in any way under normal circumstances. But, if WOPR is pinging Adam, then it starts responding to ping requests, HTTP gets, and SSH tunnels. I'm an amateur, and brand new to Ubuntu server, so I suspect there's a misconfiguration somewhere, but there's an off chance it's a bug in the OS. Does anyone know what might cause this behavior? Thanks a lot!

  Read the article

• scp vs netatalk, samba, and/or vsftpd with External USB drive

  - by KitsuneYMG

  I set up a ubuntu server machine to share an ext2 formatted external usb drive. When attempting to copy a single 275MB files from said device through netatalk, I get estimated download rates at around 45 min. With samba and ftp (using vsftpd) I get 1+ hours! Using scp to copy the file results in complete download within 5 minutes. Another option, ssh+cp from external device to ~ and then using netatalk to grab it from there results in a total time of arounf 7 minutes. Does anyone have a clue what is misconfigured? Assuming that nothing is, is there any fs/pseudo-fs that would use the internal hdd as an intermediate location/onion-layer for the external hdd (for reads only)? Details: AppleVolumes.default: /mnt/ext USB allow:username cnidscheme:cdb options:usedots,upriv

  Read the article

• Windows-to-linux: Putty with SSH and private/public key pair

  - by Johnny Kauffman

  I spent about 3 hours trying to figure out how to connect to a linux box from my windows machine using putty without having to send the password. This is connecting to an Ubuntu server that is using OpenSSH. The private key is SSH-2 RSA, 1024 bits. I am connecting using SSH2. I have run into the more common problems already: Putty generated the public key in the "wrong format". I have corrected this (as seen on this blog post). However, since I am not yet connected, I cannot absolutely confirm that this file is in the correct format. The key is all on a single line now, and I have tried adding/removing line breaks at the end of the file. I've also tried the public file doctoring process a few times to ensure that I haven't flubbed up the manual conversion. Even so, I have no way to verify accuracy here. The permissions were at once point wrong as well, specifically meaning that the file had too many permissions. I had to solve this too and I know it got past this because I no longer see a related error in /var/log/auth.log. I've tried both authorized_keys and authorized_keys2 in case the server has an old version of OpenSSH, but this changed nothing. I do have access as a user. After this keyfile stuff fails, I can enter my password instead The only remaining nibble of information I have is that it claims I have the alleged password wrong: sshd[22288]: Failed password for zzzzzzz from zz.zz.zz.zz port 53620 ssh2 Even so, as far as I can tell, this is just a lazy try/catch somewhere, since I don't think there's a password involved at all. I see nothing else in any of the /var/log files of use. What else could be wrong?

  Read the article

• Unable to mount root fs over NFS [on hold]

  - by johnmadrak

  I am attempting to set up a Raspberry Pi running Pidora to boot from an NFS share. My configuration in cmdline.txt is: dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/nfs nfsroot=<serverip>:/fake/path,nfsvers=3,rw,nolock nfsrootdebug ip=dhcp elevator=deadline rootwait On the Pi, the output I see is: IP-Config: Got DHCP answer from <router>, my address is <clientip> IP-Config: Complete: device=eth0, hwaddr=<macaddress>, ipaddr=<clientip>, mask=255.255.255.0, gw=<routerip> host=<clientip>, domain=, nis-domain=(none) bootserver=<routerip>, rootserver=<serverip>, rootpath= nameserver0=<routerip> (It pauses for a bit here) VFS: Unable to mount root fs via NFS, trying floppy VFS: Cannot open root device "nfs" or unknown-block(2,0); error -6 Please append a correct "root=" boot option; here are the available partitions: ..... On the NFS Server (an OpenVZ Container), the output I see in the /var/log/messages is: Aug 22 23:24:01 vps-4178 rpc.mountd[928]: authenticated mount request from <clientip>:783 for /fake/path (/fake/path) Aug 22 23:24:38 vps-4178 rpc.mountd[928]: authenticated mount request from <clientip>:741 for /fake/path (/fake/path) Aug 22 23:25:25 vps-4178 rpc.mountd[928]: authenticated mount request from <clientip>:752 for /fake/path (/fake/path) Aug 22 23:26:12 vps-4178 rpc.mountd[928]: authenticated mount request from <clientip>:876 for /fake/path (/fake/path) To test, I've made sure I can mount (non-root) from both the Pi and another machine and it worked. Does anyone have an idea on what could be wrong or how to narrow it down? Thank you in advanced for your help.

  Read the article

• How to configure a large mtu (linux)

  - by Somejan

  I have a gigabit ethernet connection from my laptop to my router, and a working ipv6 connection to the internet. I can receive very large packets from sites on the internet, with sizes up to at least 10000 bytes (according to wireshark). (edit: turns out to be linux's 'generic receive offload') However, when trying to send anything, my local computer fragments at just below 1500 bytes for ipv6. (On ipv4, I can send tcp packets to the internet of at least 1514 bytes, I can ping with packets up to the configured mtu of 6128 but they are blackholed.) I'm on ubuntu 12.04. I have configured an mtu for my eth0 of 6128 (the maximum it accepts), both using ip link set dev eth0 mtu 6128 and in the NetworkManager applet gui, and restarted the connection. ip link show eth0 shows the 6128 mtu is indeed set. ip -6 route shows that none of the paths the kernel knows about have an mtu set. I can ping over ipv4 with packets up to 6128 bytes (though I don't get responses), but when I do ping6 myrouter -c3 -s1500 -Mdo I get error replies from my own computer saying that the packets are too large and the mtu is 1480. I have confirmed with Wireshark that nothing is put on the wire, and the replies are indeed generated by my own computer. So, how do I get my computer to use the larger mtu?

  Read the article

• linux container bridge filters ARP reply

  - by Dani Camps

  I am using kernel 3.0, and I have configured a linux container that is bridged to a tap interface in my host computer. This is the bridge configuration: :~$ brctl show bridge-1 bridge name bridge id STP enabled interfaces bridge-1 8000.9249c78a510b no ns3-mesh-tap-1 vethjUErij My problem is that this bridge is dropping ARP replies that come from the ns3-mesh-tap-1 interface. Instead, if I statically populate the ARP tables and ping directly everything works, so it has to be something related to ARP. I have read about similar problems in related posts, and I have tried with the solutions explained therein but nothing seems to work. Specifically: ~$ grep net.bridge /etc/sysctl.conf net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-filter-vlan-tagged = 0 net.bridge.bridge-nf-filter-pppoe-tagged = 0 arptables and ebtables are not installed. iptables FORWARD is all set to accept: Chain FORWARD (policy ACCEPT) target prot opt source destination The bridged interfaces are set to PROMISC: ~$ ifconfig ns3-mesh-tap-1 Link encap:Ethernet HWaddr 1a:c7:24:ef:36:1a ... UP BROADCAST PROMISC MULTICAST MTU:1500 Metric:1 vethjUErij Link encap:Ethernet HWaddr aa:b0:d1:3b:9a:0a .... UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 The macs learned by the bridge are correct (checked with brctl showmacs). Any insight on what I am doing wrong would be greatly appreciated. Best Regards Daniel

  Read the article

• netmask: command not found

  - by Ian R.

  I purchased a new server with a few ip's so I modified the /etc/network/interfaces file recently so that my ip's can go live. While editing that file I created a backup and deleted the original file. I recreated the interfaces file using the touch command and gave +x permissions but now, when trying to restart the interface (/etc/network/interfaces restart) I get all sorts of errors: /etc/network/interfaces: line 10: iface: command not found /etc/network/interfaces: line 11: address: command not found /etc/network/interfaces: line 12: netmask: command not found /etc/network/interfaces: line 13: auto: command not found Can any1 point what I forgot to do? Thanks.

  Read the article

• Print from Linux to Windows networked printer

  - by wonkothenoob

  I want to print from a Debian (Lenny) workstation to a Windows networked printer. I'm not even sure what type of Windows network this is. Our tech-support is friendly but doesn't want to get involved with supporting Linux. I need to use it for a variety of reasons and am completely stumped because I know nothing about Windows networking. They gave me URI smb://msprint.ourorg.edu as the "address" of the printer and further confirmed that the domain is "OURORG" and the share is "PHYS-PRI". I've installed CUPS and made sure that it's running as a daemon, I've clicked on the system-config-printer[1] icon, selected the printer as a Windows printer shared via SAMBA and entered the above URI. Attempting to print a testpage just sees it sit in the queue. I attempted to see if I could access the share using two other methods. Method 1. First I tried the "smbclient" from the CLI: $ smbclient -L //msprint.ourorg.edu -U user23 timeout connecting to 192.168.44.3:445 timeout connecting to 192.168.44.3:139 Connection to msprint.ourorg.edu failed (Error NT_STATUS_ACCESS_DENIED) Method 2. I tried to use the GUI tool Smb4K. This shows me four other toplevel (I'm assuming they're domains?) groupings one of which is the one which our IT department supplied to me. Clicking them shows a bunch of other machines with (what I assume are NetBIOS names?) including my own. I see all sorts of other networked printers belonging to other departments but none within mine. Certainly not the PHYS-PRI one suggested to me by the IT folks. I realize that I'm probably using the wrong terminology for the windows network, but can anyone help me with this? What steps should I be taking in debugging this? Do I need to actually run my machine as a SAMBA server to authenticate to the printer or should I just be able to communicate using CUPS? It's a GUI to CUPS configuration http://cyberelk.net/tim/software/system-config-printer/

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >