Search Results

Search found 4229 results on 170 pages for 'intel pentium'.

Page 67/170 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • LiveCD/USB boot issues with Ubuntu 12.04 on blank drive

    - by Richek
    Not sure how common this issue is, or even how badly I may be missing something simple, but I am a first time usuer having some serious problems. Some background: old HDD running Windows 7 developed too many bad sectors and is bricked. I'm attempting to install Ubuntu 12.04 on a fresh 1TB drive by booting from a liveCD USB flash drive. I've not been able to get past the initial menu screen, however, as the process stalls out shortly after selecting an option (both boot from drive and install to drive). I've tried multiple USB drives as well as CDs, modified the boot order, flashed BIOS, and even tried booting with only the flash drive and the keyboard connected with the same results.Typically what I observe is that the OS begins what I think is compliling, listing drivers and components before freezing on one. When the keyboard is plugged in, its the keyboard driver, before I flashed BIOS, it was a BIOS related item, now its an unknown entry. The computer seems to be reading the drive (idicated by USB light flashing or CD drive reving) for roughly 10 minutes with no progress, followed by the drives going quiet. Some spec info: Motherboard: ASUS P5Q Pro, BIOS version 2102 (latest version), Intel chipset CPU: Intel Core 2 Duo E8400 Wolfdale 3.0GHz help would be appriciated!

    Read the article

  • My system screen goes black and displays Term Signal Killed?

    - by Quandite
    My computer will often just die randomly while I am using it. The screen goes black and sometimes displays the words TERM signal killed along with other things and sometimes it displays nothing. The writing stays on the screen momentarily before it disappears to just black. I then have to hold in the power button to turn it off and then re boot. Here are the specs... help! Ubuntu 10.04(lucid) Kernel Linux 2.6.32-23-generic GNOME 2.30.2 memory 495.7 MiB processor Intel(R) Pentium(R) 4CPU 1.80GHz

    Read the article

  • How to get Nvidia graphics working on Sony Z laptop?

    - by projectshave
    I have an older Sony VAIO Z 590 laptop with switchable graphics between Intel and Nvidia GeForce 9300M. It is NOT Optimus. I did a clean install of Ubuntu 12.04. Everything works, but it's using Unity 2D with the Intel drivers. I've tried loading the Nvidia drivers from "Additional Drivers", but it says "this driver is activated but not currently in use". When I run "nvidia-settings", an error window pops up to say "You do not appear to be using the NVIDIA X drivers." "lspci" shows both graphics cards. Let me know if I should add more info. How do I get the Nvidia graphics and Unity 3D working? More info: $ lshw -short -class display H/W path Device Class Description ============================================== /0/100/1/0 display G98 [GeForce 9300M GS] /0/100/2 display Mobile 4 Series Chipset Integrated Graphics C $ glxinfo name of display: :0 Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Excerpts from Xorg.0.log: [ 16.373] (II) LoadModule: "glx" [ 16.373] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 16.386] (II) Module glx: vendor="NVIDIA Corporation" [ 16.386] compiled for 4.0.2, module version = 1.0.0 [ 16.386] Module class: X.Org Server Extension [ 16.386] (II) NVIDIA GLX Module 295.49 Tue May 1 00:09:10 PDT 2012 [ 16.608] (II) NVIDIA dlloader X Driver 295.49 Mon Apr 30 23:48:24 PDT 2012 [ 16.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 17.693] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

    Read the article

  • Can't get Unity 3D to work in 11.10

    - by pmoseph
    I recently upgraded to 11.10 on my Lenovo ThinkPad T520, and I'm not able to load Unity 3D (I'm not selecting 2D at login menu either). me@mycomp:~$ echo $DESKTOP_SESSION ubuntu-2d I ran the unity support test below as well. me@mycomp:~$ /usr/lib/nux/unity_support_test -p Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: unable to create the OpenGL context And it looks like I only have one graphics card: me@mycomp:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Also, Ubuntu lists nothing under the "Additional Drivers" window. Any help would be extremely appreciated as I'm somewhat of a noob. Thanks! Edit 1: Here is the output of lshw -C display me@mycomp:~$ sudo lshw -C display *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:5000(size=64)

    Read the article

  • CS4326/7 sound chipset on Thinkpad 600E

    - by user7120
    OK, I know this has been a problem for a while, and I know by now this really old Pentium II laptop is really really really obsolete. However, I have installed Lubuntu 10.10 on this laptop and things seem to work fine except the sound. Now I've read and gone through a bunch of tutorials and guides to working around this, none of which have worked. I have gone through this Ubuntu bug report and that doesn't work either. The problem I think is that the latest workaround is (understandably) about two Ubuntu versions behind. Now I'm not sure what has changed since then to make that workaround not work, but I would appreciate any help. Thanks

    Read the article

  • Kubuntu not showing eth0

    - by Laurbert515
    I just installed Kubuntu 12.04.2 and do not have an internet connection. I also cannot access the Desktop and only have the terminal. When I enter xlcock I get Error: Can't open display:. I believe this is because I do not have the correct drivers and need to download them ... using the internet which I can't access. So here's what's going on ... ifconfig gives: lo Link ecap: Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:0 RX bytes:1296 (1.2 KB) TX bytes:1296 (1.2 KB) wlan0 Link encap: Ethernet HWaddr 68:17:29:58:49:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lspci -nnk gives: 07:00.0 Network Controller [0280] Intel Corporation Centrino Wireless-N 2230 [8086:0887] (rev c4) Subsystem: Intel Coporation Centrino Wireless-N 2230 BGN [8086:4062] Kernel driver in use: iwlwifi Kernel modules: iwlwifi 0d:00.0 Ethernet Controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 10) Subsystem: Toshiba America Info Systems Device [1179:fa77] I believe this means that it is using the ethernet connection but thinks it is a wireless connection. sudo lshw -class network gives: *-network description: Wireless interface product: Centrino Wireless=N 2230 ... *network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet I want to get the internet working so I can fix the GPU driver, etc. but I can't seem to get it working even though I have my ethernet cable plugged in (and I'm sure it is working).

    Read the article

  • How do I install a driver for a Kodak esp 3250 printer?

    - by user108608
    First my system: pentium 4 -don't remember the speed-, 1g ram, dual boot to separate physical drives, Fdos and Lubuntu 12.1 second my lan: I have four computers operating for the same printer. Intel quad core i5, 4g ram, running Windoze 7 64 bit, printer connected and shared from here. Kodak ESP 3250 Gateway 17" laptop running Windoze 7 32bit Asus tablet (small laptop) running Lumbutu 12.1 My dual boot system running Fdos and Lubuntu 12.1 The problem: I downloaded c2esp_25c-1_i386.deb, tried to install it using DEBI Package Installer, it loads the files, looks for cups driver and ends with an error: "Dependancy is not satisfiable: libcupsdriver1 (=1.4.0)" What do I do now? Is there some place that I can get the correct cups driver? further information: The Asus tablet was running Ubuntu 12.1 (very slowly and with a few crashes) and could print from the lan printer with no problems. Is there something in Ubuntu that can be loaded into Lubuntu?

    Read the article

  • How do I turn off PCI devices?

    - by ethana2
    With the purchase of an Intel SSD and 85WHr Li-ion battery and the linking of wifi and bluetooth to my laptop's wireless switch, extensive Intel PowerTop usage, switching from compiz to metacity, stopping of the desktop-couch daemon, removal of Ubuntu One and several other services from my startup, disabling of everything possible in my BIOS, and physical removal of my optical drive, I've gotten my battery life up fairly high, but I think there's still more to be done. Specifically, when I'm in class taking notes, I want to temporarily but completely power down: Ethernet Firewire USB ports SD card reader Optical drive Webcam Sound card PCMCIA slot ..without turning them off in my BIOS like they are now, if possible, because then I have to restart my computer to use any of them. As it stands, I still haven't managed to power down: Firewire USB connection to webcam sound card How do I tell Linux to disable and power down these devices? Is it true that any PCI slot can be physically powered down? My current idle power consumption is 7.9 watts plus the screen. (10.0W at min. brightness) Also, how do I set the screen timeout to ten seconds? gconf editor isn't honoring it when I set it to that. Will switching from nVidia to Nouveau save any significant amount of power?

    Read the article

  • LiveCD not booting/can't install Ubuntu 11.04

    - by user20318
    So, i got a new laptop somedays ago and as usualy, i went formated it to install Ubuntu. Download 11.04 and burned it on my pendrive using my old laptop (running 11.04). When i tryed to boot from the LiveUSB on my new laptop, it just showed me some weird graphics and if i select any option (can't see what im selecting), it gives me a black screen and that is all. Then i tryed to boot with this LiveUSB on my old laptop, and it worked just fine ._. Burned a CD with Ubuntu 11.04 (64bits) and the problem continue. Then i tought it could be my CD Driver, since the laptop is new and all... burned a Windows 7 64 bits DVD and it worked just fine. Also, if i check the CD/Pendrive inside Windows Seven, all the files there are ok. Anyone have any idea of what can be? I found lots of questions about this, but none of them had the weird menus i'm getting ._. oohh... i also get a "prefix is not set" before the weird menu appears :S My sis specs: Intel Core i5 2400 Intel HD 3000 4gb DDR3 If anyone can help, i will be really greatfull ._.

    Read the article

  • The application compiz has closed unexpectedly

    - by suhaas
    I have installed Ubuntu 12.10 on my desktop. (Pentium 4, 80 GB hard disk, 2 GB RAM, 32-bit CPU.) And I have installed Windows XP. I made a 40 GB partition for windows and 40 GB for Ubuntu. I installed Ubuntu and it said "installation is complete" and asked me to restart. I restarted the PC and logged in. After 1 minute I get a message like this: The application compiz has closed unexpectedly. Then I closed it. After that it just stays in blank screen nothing shows up. What should I do?

    Read the article

  • Is there a way to force lubuntu screen resolution?

    - by za1
    I have a Dell Inspiron 4000, 900 Mhz Pentium III, 192 MB RAM,10.1 GB disk running Lubuntu 12.04. When I start the computer, and I check the display resolution, Monitor Settings claims that the max resolution is 1024x768. I then connected another monitor I had lying around, rebooted, and now the laptop monitor looks normal,and monitor settings claims that 1280x1024 is the max resolution (it is) and the other monitor doesn't turn on. (black screen) The external monitor is not broken. Is there a way to, without the external monitor, force the laptop monitor resolution to 1280x1024? (The following is another question) - How can you run commands automatically at startup? Specifically "xinput 18 118 0" (without quotes) The first question is important, I can live with typing the second one at every boot. Thanks

    Read the article

  • Screen flickering / scrambling on an Asus UL30A

    - by user55059
    Recently my Laptop screen started to flicker. You can view the phenomena here: YouTube Sometimes the screen is totally scrambled, but most of the time it starts with the Title bar only. It happens inconsistently. My Laptop is Asus UL30A and I'm using Ubuntu 11.10. Output from command: sudo lshw -C display; lsb_release -a; uname -a; xrandr *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:fe400000-fe7fffff memory:d0000000-dfffffff ioport:dc00(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:fe800000-fe8fffff LSB Version: core-2.0-ia32:core-2.0-noarch:core-3.0-ia32:core-3.0-noarch:core-3.1-ia32:core-3.1-noarch:core-3.2-ia32:core-3.2-noarch:core-4.0-ia32:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric Linux steelke 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 293mm x 164mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) I already rolled back the kernel to 3.0.0-14 instead of 3.0.0-17 as mentioned in this post, but without result. I guess the problem is related to the driver, because I don't see similar behaviour in the BIOS Setup. Any tips or help is welcome.

    Read the article

  • which flavor of Ubuntu works on ASUS P4GE MX mobo with P4 and 1gb ram

    - by user209546
    I have Ubuntu 13.10 installed on ASUS P4GE MX Mother board with Intel 845 Chip set and Pentium 4 processor with 1GB ram. Unity and Dash are not loaded, hence not able to close any page opened by right clicking on blank desktop and entering into 'change desktop background'. Live wall papers are working but the setting page is not closing as no buttons are available on the panel. I removed Ubuntu 13.10 and tried with 13.04 / 12.10 / 12.04 / 11.10 and 11.04. Ubuntu 11.04 is working but the problem is that it out of date and upgrades available. Please provide a way / solution

    Read the article

  • First set up of a server need some help

    - by mike551345
    i want to start a file share server. i need help on how to get it started and running. i plan on using thing a lot and also maybe run a small web page from the server. plz help me figure out what i should install for packages. also the file share i would like to have a account login and stuff. also im running a 12.04 ubuntu server. it has a 1.4 gb of ram, with a 80gb harddrive (for now), and running a Pentium 4 possessor with like 1.2GHz not sure exactly but know it small.

    Read the article

  • Sound not working with Ubuntu 12.10 clean install

    - by ZooRocket
    Did a clean install of Ubuntu 12.10 from 12.04 and the sound is not working now. In 12.04 it worked out of the box. I ran hwinfo --sound > hal.1: read hal dataprocess 4222: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 10: PCI 1b.0: 0403 Audio device [Created at pci.318] Unique ID: u1Nb.ekgK5auW5RA SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801G (ICH7 Family) High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "82801G (ICH7 Family) High Definition Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01de Revision: 0x01 Memory Range: 0xfdffc000-0xfdffffff (rw,non-prefetchable) IRQ: 11 (no events) Module Alias: "pci:v00008086d000027D8sv00001028sd000001DEbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Not sure how to proceed to fix this. Has also worked prior to this version.

    Read the article

  • WiFi USB adapter showing the Network ..... but no connection in effect

    - by Idrees
    I have Pentium 4 system 3 GHz, 1 GB RAM ..... (no built-in WiFi) I installed Ubuntu 12.10 on my PC, works fine. It picked all the drivers for audio, video itself. I plugged TP-Link 54Mbps High Gain Wireless USB Adapter (TL-WN422G) ..... (link for the device: http://www.tp-link.com/en/products/details/?model=TL-WN422G) Now what happens is that the WiFi network is detected and shown in the "Network Connections", and it is also connected to it but when I open Firefox it is as if there no internet connection at all.

    Read the article

  • Very slow startup after update to 12.04

    - by M Legoh
    My hardware: Dell Latitude D600 laptop Processor: Intel Pentium (r) 1.8 GHz Memory 1.2 GiB Graphics R200 (RV250 4C66) x86/MMX/SSE2 TCL DRI2 Disk: 37.7 gb I did an update from 11.?? using the automatic system update that pops up when you switch/log on. Ever since then when I switch on the machine it takes approximately one hour to get to the login screen. Sometimes the actual login will take time too, but sometimes within a couple of minutes I am logged in. Once I am logged in I find I can work normally, the response is not swift, but is neither too slow that I cannot work. I was wondering if there was anything I could do to speed things up. I deliberately did not do a clean install from disk, because I did not want to loose settings on the machine.

    Read the article

  • Can I get some advice on graphics cards please?

    - by Victor9098
    I know that Steam for linux is on the way and have been seen a lot of games appearing in the Ubuntu Software Centre of late but my system lacks a decent graphics card and was hoping I could get some recommendations. The desktop is a Packard Bell Imedia S1800 (or Imedia D3526 UK) with the following specs; Memory: 3.8 GiB Processor: Pentium(R) Dual-Core CPU E5800 @ 3.20GHz × 2 The system lists the graphics as 'unknown', though I think its just an integrated Intel card From what I can see there is a free PCI-E x16 slot. Any advice would be great, thanks!

    Read the article

  • How do I use LibreOffice's 3d transitions in Impress?

    - by Lvkz
    How can I get the 3D transitions working on Impress? I got a presentation coming soon, and as a requirement of the course the professor want us to use transitions on our "Power Point" chapter, obviously I have been using LibreOffice in every exercise but the native transitions are kind of lame, so when I install the newer version of Ubuntu, always install the extra package to the transitions - I had installed the 3D package: libreoffice-ogltrans 1:3.4.3-3ubuntu2 In previous versions of Ubuntu and worked perfectly, but for some reason is not working in this release. I got LibreOffice 3.4.3, Ubuntu Oneiric Ocelot (11.10) and my hardware is not relevant because I had it working before on previous releases. I know is not critical, but for my class is a pretty important deal, and can be a perfect opportunity to show the class that the cool stuff are not only in Windows. As a recomendation of one of Eliah Kagan, I'm putting the output of: sudo lshw -C video *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:f6c00000-f6ffffff memory:e0000000-efffffff ioport:efe8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:f6b00000-f6bfffff And I'm not using Unity - it don't there anyways -, I'm using instead Gnome Shell.

    Read the article

  • after BIOS splash, will not boot -- asks me to select an OS, but it just reboots

    - by user92040
    I'm running Linux Mint 13 MATE 64-bit. Everything has been working for several weeks. Yesterday, when I tried to boot up my computer, after the BIOS screen flashes I reach a screen with a black background that reads at the top: GNU GRUB version1.99-21ubuntu3.4 Then there is a box in which I can select from the following lines: Linux Mint 13 MATE 64-bit, 3.2.0-31-generic (/dev/sdb2) Linux Mint 13 MATE 64-bit, 3.2.0-31-generic (/dev/sdb2) -- recovery mode Previous Linux versions Memory test (memtest86+) Memory test (memtest86+, serial console 115200) At the bottom it reads: Use the ? and ? keys to select which entry is highlighed. Press enter to boot the selected OS, 'e' to edit the commands before booting or 'c' for a command-line. I have no idea why it started doing this and, worse, I have no idea how to get out of here. No matter which option I select, I can't get it to boot the OS. If I select either of the first two, it reboots to splash the BIOS and then I'm right back where I started. If I choose "Previous Linux versions" I get essentially the same screen with only two choices (which are the same as the first two choices listed above, Linux 13 MATE and the recovery mode). Again, choosing either one of those results in a reboot. If I try to run either of the memtest options, it reads: error: unknown command 'linux16', Press any key to continue... Then it brings me back to the same screen Can anyone help me please? Intel Core i5-2500 ASUS P8Z68-V LX Intel Motherboard G. Skill Ripjaws series F3-12800CL9D-8GBRL (4GB x2) Plextor 128GB M5S Series SSD

    Read the article

  • BumbleBee / getting Nvidia 310.19 Drivers to Work | 12.10

    - by Charles Mynard
    Asus U31JG - A1 Laptop: -Intel Core i3 -Nvidia 415m / Intel HD Graphics ( Optimus Technology ) Hello, I have been trying for about 3 weeks now to get any kind of Nvidia driver to work, and now am determined to get the 310.19 driver to work. I have tried numerous times of which either nothing happened or my interface ( menu bars, the top and left bar on desktop, and the ability to close a window) would disappear. Apparently I'm not making the connection on how to get these to install properly. I have tried numerous other posts and websites and attempted "bumblebee" to no avail. I am wondering if anyone can write a step by step guide of commands that I need to run in terminal to get this to work. I've had to reinstall 12.10, so if you could walk me through the process of getting the drivers downloaded and installed, I would greatly appreciate it. I barely know what I'm doing, and this is quite a turn off for someone new to Ubuntu, I really want to enjoy it but this is preventing me from committing. Thank you in advance, and I apologize for being so flustered / helpless with this but I have ran out of patience with this.

    Read the article

  • Why isn't Chrome rendering images and fonts correctly?

    - by user287558
    I have an Acer monitor and an Intel Pentium 4 running 12.04 32-bit. Chrome renders all webpages like this: This is how CNN should look: I have Firefox installed and its images/fonts look fine. I am new to Ubuntu and comfortable with using Terminal. Beyond that, I have no idea what I'm doing. This happened all of a sudden a few weeks ago. Any suggestions would be very much appreciated. Thanks in advance.

    Read the article

  • Why does Windows 7 overall performance is better than Ubuntu 11.10?

    - by user37805
    I have a i7 2600 processor, 8Gb DDR3 ram, nVidia GTX570, and Ubuntu takes 45-50 seconds to boot and 32-35 seconds to power off, while windows 7 boots in 20-25 seconds and shuts down in 10 seconds. Both OS with autologin enabled, and in dual boot. Ubuntu is slow with preload too, and doesn't show any boot splash after installing drivers and didn't recognize my nVidia graphics card on jockey GTK, I had to add x swat repository and that didn't worked. I installed proprietary drivers through terminal (nvidia-common, nvidia-settings) in order to have 3d acceleration. But it doesn't make any difference on the speed. I also have a Pentium 4 PC and ubuntu 11.10 is way faster than windows 7 or XP. Also with nvidia graphics card and preload. http://paste.ubuntu.com/924890/ there is my boot script, sorry but some words are in Spanish because my ubuntu is in Spanish. Not using WUBI, Ubuntu has its own partition, 64-bits, and Matlab 2011 has very low performance compared to windows version.

    Read the article

  • Dell Inspiron7520 and ubntu 12.04 issues

    - by user91358
    I have a DELL Inspiron 7520 in the highest configuration: 3rd Generation Intel® Core™ i7-3612QM processor (6M Cache, up to 3.1 GHz) 15.6" Full High Definition (1080p) LED Display 8GB3 Dual Channel DDR3 SDRAM at 1600MHz 1TB 5400RPM SATA HDD + 32GB mSATA SSD w/Intel Smart Response Blu-ray Disc (BD) Combo (Reads BD and Writes to DVD/CD) AMD Radeon™ HD 7730M 2GB 6.09 lbs and I have installed Ubuntu 12.04 few days ago and I'm facing some issues: 1) sometimes the whole ntb freezes and I have to hold power button for 5 secs to shut it down. I think it is something with VGA and connected external monitor. I have read somewhere that it is already a reported bug, but what I am not sure about that it is doing sporadically. Sometimes it freezes right after I log in, sometime I ran few hours and then it freezes. I am using those proprietary drivers but I wasn't been able to install those with updates. 2) the next issue is the fan is quite noisy even when the ntb is almost Idle. (max 10% CPU usage). Can you recommend me some software which could do this power management to lower the noise? I have tried CPU frequency scaling indicator, but it seems that it has not any effects. 3) and issue no. 3: when I want to log out, restart or shutdown using the menu in upper right corner the upper and left trays disappear, but programs are still running and they won't close to complete log out or shutting down the OS. When I use the CLI command, it works fine. Thanks for any help you can provide.

    Read the article

  • Ubuntu 10.04 LTS Minimal requirements (special)

    - by BDX
    I have a PC with 512MB of RAM, an Intel Pentium 4 processor(2GHz), SiS 651 video card(32MB) and a SiS C-Media AC'97 sound controller. I know that my video card is not and will not be supported for Linux. But I wonder if my PC is able to install and start Ubuntu, not just 10.04 LTS, because I'm willing to download 12.04 LTS when it's released. Will unity work? I searched on the internet but I couldn't find a good answer. Thanks in advanced.

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >