Search Results

Search found 4229 results on 170 pages for 'intel pentium'.

Page 69/170 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• Nginx + Nagios : 502 Bad gateway

  - by MrROY

  I have a fully new install nagios, but I can't access to it. Here's my Nginx config: server{ listen 80; server_name 61.148.45.10; # blahblah # Nagios Monitoring location /nagios3/ { proxy_pass http://127.0.0.1:80; } } Nagios is installed step by step(From this Linode guide): sudo apt-get install -y nagios3 Then I try to visit http://ip-address/nagios3/, but it shows 502 bad gateway. How do I deal with this ? This is my /var/log/syslog: Oct 25 14:18:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;1;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:19:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;1;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:19:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;2;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:20:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;2;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:20:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;3;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;3;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:21:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;HARD;4;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:17 my-server nagios3: SERVICE NOTIFICATION: root;localhost;Disk Space;WARNING;notify-service-by-email;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:17 my-server postfix/pickup[24474]: 4F89F394034C: uid=109 from=<nagios> Oct 25 14:21:17 my-server postfix/cleanup[27756]: 4F89F394034C: message-id=<20131025062117.4F89F394034C@my-server> Oct 25 14:21:17 my-server postfix/qmgr[24475]: 4F89F394034C: from=<nagios@[email protected]>, size=594, nrcpt=1 (queue active) Oct 25 14:21:17 my-server postfix/local[27758]: 4F89F394034C: to=<root@localhost>, relay=local, delay=0.15, delays=0.11/0/0/0.04, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 14:21:17 my-server postfix/qmgr[24475]: 4F89F394034C: removed Oct 25 14:22:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;HARD;4;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:22:07 my-server nagios3: SERVICE NOTIFICATION: root;localhost;HTTP;WARNING;notify-service-by-email;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:22:07 my-server postfix/pickup[24474]: 219CA3940381: uid=109 from=<nagios> Oct 25 14:22:07 my-server postfix/cleanup[27756]: 219CA3940381: message-id=<20131025062207.219CA3940381@my-server> Oct 25 14:22:07 my-server postfix/qmgr[24475]: 219CA3940381: from=<nagios@[email protected]>, size=605, nrcpt=1 (queue active) Oct 25 14:22:07 my-server postfix/local[27758]: 219CA3940381: to=<root@localhost>, relay=local, delay=0.12, delays=0.07/0/0/0.05, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 14:22:07 my-server postfix/qmgr[24475]: 219CA3940381: removed Oct 25 14:39:01 my-server CRON[28242]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) And there're lot of 127.0.0.1 visit in nginx log, but I actually visit from a external ip: 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36" 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36" 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36"

  Read the article

• How do I determine if my controller is in IDE or AHCI mode in Linux?

  - by philcolbourn

  I have an old MacBook Pro 4,1 (early 2008) - but I suspect an answer would apply to many MacBook Pros. It has an Intel IDE/SATA controller (ICH8M/ICH8M-E). I have installed a patched MBR that is supposed to put my controller into AHCI mode. It does this by setting some controller port value that I don't understand. This seems to work as I get this from lspci: 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) Now most, perhaps all, sites that provide a solution (enabling AHCI) suggest that after a sleep/wake cycle that a controller will revert to IDE mode due to how Apple support Windows. They recommend disabling sleep. From author of patchedcode.bin I think Enabling AHCI for Windows on MacBooks NB: I do not have bootcamp installed and I do not have Windows installed. Is there a way to prove that my controller is in IDE or AHCI mode? Background Data Using patchedcode.bin MBR I get this in syslog: Jun 12 22:33:22 max kernel: [ 1.860955] ahci 0000:00:1f.2: version 3.0 Jun 12 22:33:22 max kernel: [ 1.861052] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X Jun 12 22:33:22 max kernel: [ 1.861117] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode Jun 12 22:33:22 max kernel: [ 1.861120] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Jun 12 22:33:22 max kernel: [ 1.861130] ahci 0000:00:1f.2: setting latency timer to 64 Jun 12 22:33:22 max kernel: [ 1.880880] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jun 12 22:33:22 max kernel: [ 1.880983] scsi2 : ahci Jun 12 22:33:22 max kernel: [ 1.884552] scsi3 : ahci Jun 12 22:33:22 max kernel: [ 1.886932] scsi4 : ahci Jun 12 22:33:22 max kernel: [ 1.886998] ata3: SATA max UDMA/133 abar m2048@0xdb504000 port 0xdb504100 irq 45 Jun 12 22:33:22 max kernel: [ 1.887000] ata4: DUMMY Jun 12 22:33:22 max kernel: [ 1.887002] ata5: DUMMY Jun 12 22:33:22 max kernel: [ 2.204103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 12 22:33:22 max kernel: [ 2.204656] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 12 22:33:22 max kernel: [ 2.204662] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Jun 12 22:33:22 max kernel: [ 2.205324] ata3.00: configured for UDMA/100 Jun 12 22:33:22 max kernel: [ 2.205554] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0081 PQ: 0 ANSI: 5 Using my original MBR I get this from syslog: Jun 13 18:07:13 max kernel: [ 0.622861] ata_piix 0000:00:1f.1: version 2.13 Jun 13 18:07:13 max kernel: [ 0.622869] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 Jun 13 18:07:13 max kernel: [ 0.622924] ata_piix 0000:00:1f.1: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.623339] scsi0 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623730] scsi1 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623765] ata1: PATA max UDMA/100 cmd 0x8108 ctl 0x811c bmdma 0x80e0 irq 21 Jun 13 18:07:13 max kernel: [ 0.623767] ata2: PATA max UDMA/100 cmd 0x8100 ctl 0x8118 bmdma 0x80e8 irq 21 Jun 13 18:07:13 max kernel: [ 0.623810] ata_piix 0000:00:1f.2: MAP [ Jun 13 18:07:13 max kernel: [ 0.623811] P0 -- -- -- ] Jun 13 18:07:13 max kernel: [ 0.623866] ata_piix 0000:00:1f.2: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.624241] scsi2 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624558] scsi3 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624862] ata3: SATA max UDMA/133 cmd 0x80f8 ctl 0x8114 bmdma 0x8020 irq 18 Jun 13 18:07:13 max kernel: [ 0.624865] ata4: SATA max UDMA/133 cmd 0x80f0 ctl 0x8110 bmdma 0x8028 irq 18 Jun 13 18:07:13 max kernel: [ 1.208879] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 13 18:07:13 max kernel: [ 1.208882] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) Jun 13 18:07:13 max kernel: [ 1.208961] ata1.01: ATAPI: MATSHITA DVD+/-RW UJ-867S, 1.00, max UDMA/33 Jun 13 18:07:13 max kernel: [ 1.216186] ata3.00: configured for UDMA/100 Jun 13 18:07:13 max kernel: [ 1.224396] ata1.01: configured for UDMA/33

  Read the article

• Bash can't start a programme that's there and has all the right permissions

  - by Rory

  This is a gentoo server. There's a programme prog that can't execute. (Yes the execute permission is set) About the file $ ls prog $ ./prog bash: ./prog: No such file or directory $ file prog prog: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), for GNU/Linux 2.2.5, dynamically linked (uses shared libs), not stripped $ pwd /usr/local/bin $ /usr/local/bin/prog bash: /usr/local/bin/prog: No such file or directory $ less prog | head ELF Header: Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: Intel 80386 Version: 0x1 I have a fancy less, to show that it's an actual executable, here's some more data: $ xxd prog |head 0000000: 7f45 4c46 0101 0100 0000 0000 0000 0000 .ELF............ 0000010: 0200 0300 0100 0000 c092 0408 3400 0000 ............4... 0000020: 0401 0a00 0000 0000 3400 2000 0700 2800 ........4. ...(. 0000030: 2600 2300 0600 0000 3400 0000 3480 0408 &.#.....4...4... 0000040: 3480 0408 e000 0000 e000 0000 0500 0000 4............... 0000050: 0400 0000 0300 0000 1401 0000 1481 0408 ................ 0000060: 1481 0408 1300 0000 1300 0000 0400 0000 ................ 0000070: 0100 0000 0100 0000 0000 0000 0080 0408 ................ 0000080: 0080 0408 21f1 0500 21f1 0500 0500 0000 ....!...!....... 0000090: 0010 0000 0100 0000 40f1 0500 4081 0a08 ........@...@... and $ ls -l prog -rwxrwxr-x 1 1000 devs 725706 Aug 6 2007 prog $ ldd prog not a dynamic executable $ strace ./prog 1249403877.639076 execve("./prog", ["./prog"], [/* 27 vars */]) = -1 ENOENT (No such file or directory) 1249403877.640645 dup(2) = 3 1249403877.640875 fcntl(3, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE) 1249403877.641143 fstat(3, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0 1249403877.641484 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b3b8954a000 1249403877.641747 lseek(3, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek) 1249403877.642045 write(3, "strace: exec: No such file or dir"..., 40strace: exec: No such file or directory ) = 40 1249403877.642324 close(3) = 0 1249403877.642531 munmap(0x2b3b8954a000, 4096) = 0 1249403877.642735 exit_group(1) = ? About the server FTR the server is a xen domU, and the programme is a closed source linux application. This VM is a copy of another VM that has the same root filesystem (including this programme), that works fine. I've tried all the above as root and same problem. Did I mention the root filesystem is mounted over NFS. However it's mounted 'defaults,nosuid', which should include execute. Also I am able to run many other programmes from that mounted drive /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 1 cpu MHz : 2992.692 cache size : 1024 KB fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu tsc msr pae mce cx8 apic mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr bogmips : 5989.55 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management: Example of a file that I can run I can run other programmes on that mounted filesystem on that server. For example: $ ls -l ls -rwxr-xr-x 1 root root 105576 Jul 25 17:14 ls $ file ls ls: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, dynamically linked (uses shared libs), stripped $ ./ls attr cat cut echo getfacl ln more ... (you get the idea) ... rmdir sort tty $ less ls | head ELF Header: Magic: 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: Advanced Micro Devices X86-64 Version: 0x1

  Read the article

• Xen kernel can't see 2 disks of 6 of 1TB, does it have a limitation?

  - by PartySoft

  Linux gentoo-xen 2.6.18-xen-r12 #3 SMP Tue Oct 5 09:28:53 PDT 2010 x86_64 Intel(R) Xeon(R) CPU E5506 @ 2.13GHz GenuineIntel GNU/Linux I have 6 disks of 1 TB and i can't see all of them only 4, can anyone give me an ideea what can i do ? Filesystem Size Used Avail Use% Mounted on rootfs 886G 4.4G 836G 1% / /dev/sda3 886G 4.4G 836G 1% / rc-svcdir 1.0M 44K 980K 5% /lib64/rc/init.d shm 7.9G 0 7.9G 0% /dev/shm /dev/sdb1 917G 200M 871G 1% /home2 /dev/sdc1 917G 200M 871G 1% /home3 /dev/sdd1 917G 200M 871G 1% /home4 The hardware is Dual xeon E5506 processors on a supermicro X8DTL mobo 4.346585] ata3.00: ATA-8, max UDMA/133, 1953525168 sectors: LBA48 NCQ (depth 0/32) [ 4.346588] ata3.00: ata3: dev 0 multi count 16 [ 4.352861] ata3.00: configured for UDMA/133 [ 4.352867] scsi3 : ata_piix [ 4.352875] PM: Adding info for No Bus:host3 [ 4.510584] ata4.00: ATA-8, max UDMA/133, 1953525168 sectors: LBA48 NCQ (depth 0/32) [ 4.510587] ata4.00: ata4: dev 0 multi count 16 [ 4.516848] ata4.00: configured for UDMA/133 [ 4.516861] PM: Adding info for No Bus:target2:0:0 [ 4.516905] Vendor: ATA Model: SAMSUNG HD103SJ Rev: 1AJ1 [ 4.516910] Type: Direct-Access ANSI SCSI revision: 05 [ 4.516920] PM: Adding info for scsi:2:0:0:0 [ 4.517452] SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.517460] sde: Write Protect is off [ 4.517461] sde: Mode Sense: 00 3a 00 00 [ 4.517478] SCSI device sde: drive cache: write back [ 4.517514] SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.517521] sde: Write Protect is off [ 4.517522] sde: Mode Sense: 00 3a 00 00 [ 4.517532] SCSI device sde: drive cache: write back [ 4.517534] sde: sde1 [ 4.524551] sd 2:0:0:0: Attached scsi disk sde [ 4.524855] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 4.524874] PM: Adding info for No Bus:target3:0:0 [ 4.524928] Vendor: ATA Model: SAMSUNG HD103SJ Rev: 1AJ1 [ 4.524933] Type: Direct-Access ANSI SCSI revision: 05 [ 4.524946] PM: Adding info for scsi:3:0:0:0 [ 4.525216] SCSI device sdf: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.525227] sdf: Write Protect is off [ 4.525228] sdf: Mode Sense: 00 3a 00 00 [ 4.525242] SCSI device sdf: drive cache: write back [ 4.525280] SCSI device sdf: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.525286] sdf: Write Protect is off [ 4.525289] sdf: Mode Sense: 00 3a 00 00 [ 4.525301] SCSI device sdf: drive cache: write back [ 4.525302] sdf: sdf1 [ 4.532691] sd 3:0:0:0: Attached scsi disk sdf [ 4.533010] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 4.977669] scsi: <fdomain> Detection failed (no card) [ 5.030479] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 5.030635] GDT-HA: Found 0 PCI Storage RAID Controllers [ 5.372350] Fusion MPT base driver 3.04.01 [ 5.372358] Copyright (c) 1999-2005 LSI Logic Corporation [ 5.579176] Fusion MPT SPI Host driver 3.04.01 [ 5.881777] ieee1394: Initialized config rom entry `ip1394' [ 6.166745] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 6.166748] ieee1394: sbp2: Try serialize_io=0 for better performance [ 6.428866] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 6.428872] md: bitmap version 4.39 [ 6.431518] md: raid0 personality registered for level 0 [ 6.495979] md: raid1 personality registered for level 1 [ 6.570270] raid5: automatically using best checksumming function: generic_sse [ 6.575523] generic_sse: 6608.000 MB/sec [ 6.575526] raid5: using function: generic_sse (6608.000 MB/sec) [ 6.596226] raid6: int64x1 1835 MB/s [ 6.613231] raid6: int64x2 1773 MB/s [ 6.630256] raid6: int64x4 1675 MB/s [ 6.647296] raid6: int64x8 1027 MB/s [ 6.664267] raid6: sse2x1 3578 MB/s [ 6.681268] raid6: sse2x2 4207 MB/s [ 6.698280] raid6: sse2x4 4625 MB/s [ 6.698281] raid6: using algorithm sse2x4 (4625 MB/s) [ 6.698285] md: raid6 personality registered for level 6 [ 6.698286] md: raid5 personality registered for level 5 [ 6.698288] md: raid4 personality registered for level 4 [ 6.781090] md: raid10 personality registered for level 10 [ 7.007043] Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 [ 7.007046] Copyright (c) 1999-2006 Intel Corporation. [ 9.229465] kjournald starting. Commit interval 5 seconds [ 9.229476] EXT3-fs: mounted filesystem with ordered data mode.

  Read the article

• Windows 8.1 Update 1 Disk Usage 100%

  - by Gookjin Jeong

  Background Information / Computer Specs I have a 14-inch Samsung Series 5 Ultra. Core i5 CPU, 750GB HDD, 8GB RAM, Intel HD Graphics 4000. I've had the computer for about 1.5 years with no major problems. Problem The issue appeared at the beginning of April this year, when I updated the OS to Windows 8.1 Update 1 (not from 8 to 8.1). After being on continually (except for at night, when I put it on sleep mode) for about 48 hours, the disk usage as seen by Task Manager hits 100%. When this happens, everything from opening/closing applications to typing and even bringing up the start screen by pressing the Windows key becomes extremely slow. The only way to make the disk usage decrease is to restart the computer. Then the problem repeats. I've used my current laptop (as well as my previous laptops) this way -- putting it on sleep mode at night and restarting it only when Windows needs to install updates -- for a long time. So I know the 100% disk usage is not due to the way I use the computer. The thing that causes the spike varies. Sometimes it's System, sometimes it's one of the various applications I installed (e.g. Chrome, Evernote, Spotify, Wunderlist, iTunes, etc.), and sometimes it's Antimalware Service Executable, etc. Tried Solutions I think I tried almost every solution out there for this problem: Running the check disk command (chkdsk /b /f /v /scan c:) from Admin Command Prompt Running Windows Memory Diagnostic Disabling Superfetch and Windows Search from services.msc Running "Fix problems with Windows Update" from Control Panel -- Troubleshooting Updating and rolling back the graphics driver (Intel HD 4000) Disabling "Use hardware acceleration when available" from Chrome settings Disabling Intel Rapid Storage Technology Running the SFC /SCANNOW command as recommended here Running a quick scan & a full scan from Windows Defender (no threats found) Taking the hard drive out and putting it back Refreshing the computer, from the Update and recovery -- Recovery option in Windows settings NONE of the above worked for me. I was about to give up but then noticed that one of the main culprits of the disk usage spike, as shown in the "Disk Activity" section of the Resource Monitor, was C:\System (pagefile.sys). I googled around and found that one of the recommended solutions was to disable pagefile. I then went to **Control Panel -- System and Security -- System -- Advanced system settings -- Advanced tab -- Performance settings -- Advanced tab -- "Change" under Virtual memory and discovered that the number for "Currently allocated" at the bottom was 1280MB, although the number for "Recommended" was 4533MB. I immediately changed it to 4533MB and checked my family members' computers to see what the numbers were like. All of theirs had a currently allocated space that was only slightly smaller than the recommended space. See screenshot below: This might fix the problem. I'll have to wait a couple more days.But if it doesn't, what in the world should I do next? I'm guessing the hard drive isn't failing because This computer is less than 2 years old; and Speccy says that the status of the HDD is good. Update 5/27/2014 The "4533MB" solution did not work. I had to reboot the computer about 30 minutes ago because the disk usage again hit 100%. When I opened Resource Monitor the C:\System (pagefile.sys) again was shown to be the culprit. I have now disabled pagefile entirely via the same window shown above in the screenshot. The number for "currently allocated" is now 0MB. Will update again in a couple days, or if the problem occurs again, whichever comes sooner.

  Read the article

• Connecting PC to TV via HDMI/DVI: Windows XP doesn't allow the appropriate screen resolution

  - by Jørgen

  I have a computer that is connected to the living room TV (a Panasonic) via HDMI. There is no other monitor connected. My problem is that the computer, which is running Windows XP, does not allow me to set the proper resolution for the TV. Both the graphics adapter and the TV should support the 1280x720 resolution, but it cannot be selected - the only available options are 1280x600 and 800x600, both in the "native" Windows dialog box and the custom Intel graphics options dialog box. Do anyone have a suggestion for a solution for this? Things I've thought of: Setting the resolution directly in the registry (where?) Installing some "custom" monitor driver (the TV manufacturer does not appear to provide any, currently the "generic" one is used) Details on the setup: Connection: DVI output on the computer via a passive DVI-HDMI adapter to the HDMI input on the TV, audio is run on a separate link, the TV is able to combine video and audio without any problem, the problem is there regardless of whether or not the audio is connected. The connection is several meters long through some walls, for this reason using a VGA cable instead is not an option. Note that the report explicitly says that the TV supports 1280x720. Still, I am not allowed to select it in Graphics Options, only 1280x600 and 800x600 is available. For 800x600, there's a lot of black around the edges; for 1280x600, the screen is "zoomed" so the edges of the monitor image (like the taskbar) is not visible. Other: The computer is running Windows XP. More recent versions of Windows are not an option (I have no licence). Linux is probably not an option (some of the video streaming sites I plan to use do not support it, I think) I wrote the rest of the details below. Thanks for any help!! TV: Panasonic TX-L32X10Y, European version; a 720p 32" quite "regular" LCD TV. Allowed resolutions according to manual: Signal name: 640x480 @60HZ Horizontal frequency: 31.47 kHz Vertical frequency: 60Hz Signal name: 750/720) /60p Horizontal frequency: 45.00 kHz Vertical frequency: 60Hz Signal name: 1,125 (1,080) / 60p Horizontal frequency: 67.50 kHz Vertical frequency: 60Hz (this is exactly how the manual presents it. PC via D-SUB (VGA cable) and "regular" HDMI have more alternatives.) Messing with the "zoom" settings on the TV does not affect the available resolution options on the computer. Computer: The following is a printout from one of the graphics adapter option pages. I think it covers most of it. The computer is a Dell. INTEL(R) EXTREME GRAPHICS 2 REPORT Report Date: 04/17/2011 Report Time[hr:mm:ss]: 20:18:02 Driver Version: 6.14.10.4396 Operating System: Windows XP* Professional, Service Pack 3 (5.1.2600) Default Language: English DirectX* Version: 9.0 Physical Memory: 1021 MB Minimum Graphics Memory: 1 MB Maximum Graphics Memory: 96 MB Graphics Memory in Use: 6 MB Processor: x86 Processor Speed: 2593 MHZ Vendor ID: 8086 Device ID: 2572 Device Revision: 02 * Accelerator Information * Accelerator in Use: Intel(R) 82865G Graphics Controller Video BIOS: 2972 Current Graphics Mode: 1280 by 600 True Color (60 Hz) * Devices Connected to the Graphics Accelerator * Active Digital Displays: 1 * Digital Display * Monitor Name: Plug and Play Monitor Display Type: Digital Gamma Value: 2.20 DDC2 Protocol: Supported Maximum Image Size: Horizontal: Not Available Vertical: Not Available Monitor Supported Modes: 1280 by 720 (50 Hz) 1280 by 720 (60 Hz) Display Power Management Support: Standby Mode: Not Supported Suspend Mode: Not Supported Active Off Mode: Not Supported (disclaimer: this question was also asked at the Wikipedia Reference Desk some time ago and might show up in a Google search. I got no useful answers there.)

  Read the article

• The Oracle Enterprise Linux Software and Hardware Ecosystem

  - by sergio.leunissen

  It's been nearly four years since we launched the Unbreakable Linux support program and with it the free Oracle Enterprise Linux software. Since then, we've built up an extensive ecosystem of hardware and software partners. Oracle works directly with these vendors to ensure joint customers can run Oracle Enterprise Linux. As Oracle Enterprise Linux is fully--both source and binary--compatible with Red Hat Enterprise Linux (RHEL), there is minimal work involved for software and hardware vendors to test their products with it. We develop our software on Oracle Enterprise Linux and perform full certification testing on Oracle Enterprise Linux as well. Due to the compatibility between Oracle Enterprise Linux and RHEL, Oracle also certifies its software for use on RHEL, without any additional testing. Oracle Enterprise Linux tracks RHEL by publishing freely downloadable installation media on edelivery.oracle.com/linux and updates, bug fixes and security errata on Unbreakable Linux Network (ULN). At the same time, Oracle's Linux kernel team is shaping the future of enterprise Linux distributions by developing technologies and features that matter to customers who deploy Linux in the data center, including file systems, memory management, high performance computing, data integrity and virtualization. All this work is contributed to the Linux and Xen communities. The list below is a sample of the partners who have certified their products with Oracle Enterprise Linux. If you're interested in certifying your software or hardware with Oracle Enterprise Linux, please contact us via [email protected] Chip Manufacturers Intel, Intel Enabled Server Acceleration Alliance AMD Server vendors Cisco Unified Computing System Dawning Dell Egenera Fujitsu HP Huawei IBM NEC Sun/Oracle Storage Systems, Volume Management and File Systems 3Par Compellent EMC VPLEX FalconStor Fusion-io Hitachi Data Systems HP Storage Array Systems Lustre Network Appliance OCFS2 PillarData Symantec Veritas Storage Foundation Networking: Switches, Host Bus Adapters (HBAs), Converged Network Adapters (CNAs), InfiniBand Brocade Emulex Mellanox QLogic Voltaire SOA and Middleware ActiveState ActivePerl, ActivePython Tibco Zend Backup, Recovery & Replication Arkeia Network Backup Suite BakBone NetVault CommVault Simpana 8 EMC Networker, Replication Manager FalconStor Continuous Data Protector HP Data Protector NetApp Snapmanager Quest LiteSpeed Engine Steeleye Data Replication, Disaster Recovery Symantec NetBackup, Veritas Volume Replicator, Symantec Backup Exec Zmanda Amanda Enterprise Data Center Automation BMC CA Unicenter HP Server Automation (formerly Opsware), System Management Homepage Oracle Enterprise Manager Ops Center Quest Vizioncore vFoglight Pro TeamQuest Manager Clustering & High Availability FUJITSU x10sure NEC Express Cluster X Steeleye Lifekeeper Symantec Cluster Server Univa UniCluster Virtualization Platforms and Cloud Providers Amazon EC2 Citrix XenServer Rackspace Cloud VirtualBox VMWare ESX Security Management ArcSight: Enterprise Security Manager, Logger CA Access Control Centrify Suite Ecora Auditor FoxT Manager Likewise: Unix Account Management Lumension Endpoint Management and Security Suite QualysGuard Suite Quest Privilege Manager McAfee Application Control, Change ControlIntegrity Monitor, Integrity Control, PCI Pro Solidcore S3 Symantec Enterprise Security Manager (ESM) Tripwire Trusted Computer Solutions

  Read the article

• SQL Server 2008 uses half the CPU’s

  - by ACALVETT

  I recently got my hands on a couple of 4 socket servers with Intel E7-4870's (10 cores per cpu) and with hyper threading enabled that gave me 80 logical CPU's. The server has Windows 2008 R2 SP1 along with SQL 2008 (Currently we can not deploy SQL 2008 R2 for the application being hosted). When SQL Server started I noticed only 2 NUMA nodes were configured and 40 logical cores where there should have been 4 NUMA nodes and 80 logical cores (see below). The problem is caused by that fact that...(read more)

  Read the article

• "Parallel Programming Talk" show

  Over at the Intel Software Network Aaron Tersteeg runs a "Parallel Programming Talk" audio show on which I was invited as a guest (for the 55th episode) to talk about Microsoft's parallelism offerings in Visual Studio 2010. The call started at 7:45AM, so if my voice sounds croaky to you, now you know why ;)Check out the 20-minute chat (and related hyperlinks) on Aaron's blog. Comments about this post welcome at the original blog.

  Read the article

• Interesting articles and blogs on SPARC T4

  - by mv

  Interesting articles and blogs on SPARC T4 processor   I have consolidated all the interesting information I could get on SPARC T4 processor and its hardware cryptographic capabilities.  Hope its useful. 1. Advantages of SPARC T4 processor  Most important points in this T4 announcement are : "The SPARC T4 processor was designed from the ground up for high speed security and has a cryptographic stream processing unit (SPU) integrated directly into each processor core. These accelerators support 16 industry standard security ciphers and enable high speed encryption at rates 3 to 5 times that of competing processors. By integrating encryption capabilities directly inside the instruction pipeline, the SPARC T4 processor eliminates the performance and cost barriers typically associated with secure computing and makes it possible to deliver high security levels without impacting the user experience." Data Sheet has more details on these  : "New on-chip Encryption Instruction Accelerators with direct non-privileged support for 16 industry-standard cryptographic algorithms plus random number generation in each of the eight cores: AES, Camellia, CRC32c, DES, 3DES, DH, DSA, ECC, Kasumi, MD5, RSA, SHA-1, SHA-224, SHA-256, SHA-384, SHA-512" I ran "isainfo -v" command on Solaris 11 Sparc T4-1 system. It shows the new instructions as expected  : $ isainfo -v 64-bit sparcv9 applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc 32-bit sparc applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc v8plus div32 mul32  2.  Dan Anderson's Blog have some interesting points about how these can be used : "New T4 crypto instructions include: aes_kexpand0, aes_kexpand1, aes_kexpand2,         aes_eround01, aes_eround23, aes_eround01_l, aes_eround_23_l, aes_dround01, aes_dround23, aes_dround01_l, aes_dround_23_l.       Having SPARC T4 hardware crypto instructions is all well and good, but how do we access it ?      The software is available with Solaris 11 and is used automatically if you are running Solaris a SPARC T4.  It is used internally in the kernel through kernel crypto modules.  It is available in user space through the PKCS#11 library." 3.   Dans' Blog on Where's the Crypto Libraries? Although this was written in 2009 but still is very useful  "Here's a brief tour of the major crypto libraries shown in the digraph:   The libpkcs11 library contains the PKCS#11 API (C_\*() functions, such as C_Initialize()). That in turn calls library pkcs11_softtoken or pkcs11_kernel, for userland or kernel crypto providers. The latter is used mostly for hardware-assisted cryptography (such as n2cp for Niagara2 SPARC processors), as that is performed more efficiently in kernel space with the "kCF" module (Kernel Crypto Framework). Additionally, for Solaris 10, strong crypto algorithms were split off in separate libraries, pkcs11_softtoken_extra libcryptoutil contains low-level utility functions to help implement cryptography. libsoftcrypto (OpenSolaris and Solaris Nevada only) implements several symmetric-key crypto algorithms in software, such as AES, RC4, and DES3, and the bignum library (used for RSA). libmd implements MD5, SHA, and SHA2 message digest algorithms" 4. Difference in T3 and T4 Diagram in this blog is good and self explanatory. Jeff's blog also highlights the differences  "The T4 servers have improved crypto acceleration, described at https://blogs.oracle.com/DanX/entry/sparc_t4_openssl_engine. It is "just built in" so administrators no longer have to assign crypto accelerator units to domains - it "just happens". Every physical or virtual CPU on a SPARC-T4 has full access to hardware based crypto acceleration at all times. .... For completeness sake, it's worth noting that the T4 adds more crypto algorithms, and accelerates Camelia, CRC32c, and more SHA-x." 5. About performance counters In this blog, performance counters are explained : "Note that unlike T3 and before, T4 crypto doesn't require kernel modules like ncp or n2cp, there is no visibility of crypto hardware with kstats or cryptoadm. T4 does provide hardware counters for crypto operations.  You can see these using cpustat: cpustat -c pic0=Instr_FGU_crypto 5 You can check the general crypto support of the hardware and OS with the command "isainfo -v". Since T4 crypto's implementation now allows direct userland access, there are no "crypto units" visible to cryptoadm.  " For more details refer Martin's blog as well. 6. How to turn off  SPARC T4 or Intel AES-NI crypto acceleration  I found this interesting blog from Darren about how to turn off  SPARC T4 or Intel AES-NI crypto acceleration. "One of the new Solaris 11 features of the linker/loader is the ability to have a single ELF object that has multiple different implementations of the same functions that are selected at runtime based on the capabilities of the machine.   The alternate to this is having the application coded to call getisax(2) system call and make the choice itself.  We use this functionality of the linker/loader when we build the userland libraries for the Solaris Cryptographic Framework (specifically libmd.so and libsoftcrypto.so) The Solaris linker/loader allows control of a lot of its functionality via environment variables, we can use that to control the version of the cryptographic functions we run.  To do this we simply export the LD_HWCAP environment variable with values that tell ld.so.1 to not select the HWCAP section matching certain features even if isainfo says they are present.  This will work for consumers of the Solaris Cryptographic Framework that use the Solaris PKCS#11 libraries or use libmd.so interfaces directly.  For SPARC T4 : export LD_HWCAP="-aes -des -md5 -sha256 -sha512 -mont -mpul" .. For Intel systems with AES-NI support: export LD_HWCAP="-aes"" Note that LD_HWCAP is explained in  http://docs.oracle.com/cd/E23823_01/html/816-5165/ld.so.1-1.html "LD_HWCAP, LD_HWCAP_32, and LD_HWCAP_64 -  Identifies an alternative hardware capabilities value... A “-” prefix results in the capabilities that follow being removed from the alternative capabilities." 7. Whitepaper on SPARC T4 Servers—Optimized for End-to-End Data Center Computing This Whitepaper on SPARC T4 Servers—Optimized for End-to-End Data Center Computing explains more details.  It has DTrace scripts which may come in handy : "To ensure the hardware-assisted cryptographic acceleration is configured to use and working with the security scenarios, it is recommended to use the following Solaris DTrace script. #!/usr/sbin/dtrace -s pid$1:libsoftcrypto:yf*:entry, pid$target:libsoftcrypto:rsa*:entry, pid$1:libmd:yf*:entry { @[probefunc] = count(); } tick-1sec { printa(@ops); trunc(@ops); }" Note that I have slightly modified the D Script to have RSA "libsoftcrypto:rsa*:entry" as well as per recommendations from Chi-Chang Lin. 8. References http://www.oracle.com/us/corporate/features/sparc-t4-announcement-494846.html http://www.oracle.com/us/products/servers-storage/servers/sparc-enterprise/t-series/sparc-t4-1-ds-487858.pdf https://blogs.oracle.com/DanX/entry/sparc_t4_openssl_engine https://blogs.oracle.com/DanX/entry/where_s_the_crypto_libraries https://blogs.oracle.com/darren/entry/howto_turn_off_sparc_t4 http://docs.oracle.com/cd/E23823_01/html/816-5165/ld.so.1-1.html   https://blogs.oracle.com/hardware/entry/unleash_the_power_of_cryptography https://blogs.oracle.com/cmt/entry/t4_crypto_cheat_sheet https://blogs.oracle.com/martinm/entry/t4_performance_counters_explained  https://blogs.oracle.com/jsavit/entry/no_mau_required_on_a http://www.oracle.com/us/products/servers-storage/servers/sparc-enterprise/t-series/sparc-t4-business-wp-524472.pdf

  Read the article

• CentOS / Redhat Linux: Setup KVM Virtualization

  <b>nixCraft: </b>"KVM (Kernel-based Virtual Machine) is a full virtualization solution for Linux on x86 hardware containing virtualization extensions Intel VT or AMD-V. How do I install KVM under CentOS or Red Hat Enterprise Linux version 5.5?"

  Read the article

• Refreshing Your PC Won’t Help: Why Bloatware is Still a Problem on Windows 8

  - by Chris Hoffman

  Bloatware is still a big problem on new Windows 8 and 8.1 PCs. Some websites will tell you that you can easily get rid of manufacturer-installed bloatware with Windows 8′s Reset feature, but they’re generally wrong. This junk software often turns the process of powering on your new PC from what could be a delightful experience into a tedious slog, forcing you to spend hours cleaning up your new PC before you can enjoy it. Why Refreshing Your PC (Probably) Won’t Help Manufacturers install software along with Windows on their new PCs. In addition to hardware drivers that allow the PC’s hardware to work properly, they install more questionable things like trial antivirus software and other nagware. Much of this software runs at boot, cluttering the system tray and slowing down boot times, often dramatically. Software companies pay computer manufacturers to include this stuff. It’s installed to make the PC manufacturer money at the cost of making the Windows computer worse for actual users. Windows 8 includes “Refresh Your PC” and “Reset Your PC” features that allow Windows users to quickly get their computers back to a fresh state. It’s essentially a quick, streamlined way of reinstalling Windows.  If you install Windows 8 or 8.1 yourself, the Refresh operation will give your PC a clean Windows system without any additional third-party software. However, Microsoft allows computer manufacturers to customize their Refresh images. In other words, most computer manufacturers will build their drivers, bloatware, and other system customizations into the Refresh image. When you Refresh your computer, you’ll just get back to the factory-provided system complete with bloatware. It’s possible that some computer manufacturers aren’t building bloatware into their refresh images in this way. It’s also possible that, when Windows 8 came out, some computer manufacturer didn’t realize they could do this and that refreshing a new PC would strip the bloatware. However, on most Windows 8 and 8.1 PCs, you’ll probably see bloatware come back when you refresh your PC. It’s easy to understand how PC manufacturers do this. You can create your own Refresh images on Windows 8 and 8.1 with just a simple command, replacing Microsoft’s image with a customized one. Manufacturers can install their own refresh images in the same way. Microsoft doesn’t lock down the Refresh feature. Desktop Bloatware is Still Around, Even on Tablets! Not only is typical Windows desktop bloatware not gone, it has tagged along with Windows as it moves to new form factors. Every Windows tablet currently on the market — aside from Microsoft’s own Surface and Surface 2 tablets — runs on a standard Intel x86 chip. This means that every Windows 8 and 8.1 tablet you see in stores has a full desktop with the capability to run desktop software. Even if that tablet doesn’t come with a keyboard, it’s likely that the manufacturer has preinstalled bloatware on the tablet’s desktop. Yes, that means that your Windows tablet will be slower to boot and have less memory because junk and nagging software will be on its desktop and in its system tray. Microsoft considers tablets to be PCs, and PC manufacturers love installing their bloatware. If you pick up a Windows tablet, don’t be surprised if you have to deal with desktop bloatware on it. Microsoft Surfaces and Signature PCs Microsoft is now selling their own Surface PCs that they built themselves — they’re now a “devices and services” company after all, not a software company. One of the nice things about Microsoft’s Surface PCs is that they’re free of the typical bloatware. Microsoft won’t take money from Norton to include nagging software that worsens the experience. If you pick up a Surface device that provides Windows 8.1 and 8 as Microsoft intended it — or install a fresh Windows 8.1 or 8 system — you won’t see any bloatware. Microsoft is also continuing their Signature program. New PCs purchased from Microsoft’s official stores are considered “Signature PCs” and don’t have the typical bloatware. For example, the same laptop could be full of bloatware in a traditional computer store and clean, without the nasty bloatware when purchased from a Microsoft Store. Microsoft will also continue to charge you $99 if you want them to remove your computer’s bloatware for you — that’s the more questionable part of the Signature program. Windows 8 App Bloatware is an Improvement There’s a new type of bloatware on new Windows 8 systems, which is thankfully less harmful. This is bloatware in the form of included “Windows 8-style”, “Store-style”, or “Modern” apps in the new, tiled interface. For example, Amazon may pay a computer manufacturer to include the Amazon Kindle app from the Windows Store. (The manufacturer may also just receive a cut of book sales for including it. We’re not sure how the revenue sharing works — but it’s clear PC manufacturers are getting money from Amazon.) The manufacturer will then install the Amazon Kindle app from the Windows Store by default. This included software is technically some amount of clutter, but it doesn’t cause the problems older types of bloatware does. It won’t automatically load and delay your computer’s startup process, clutter your system tray, or take up memory while you’re using your computer. For this reason, a shift to including new-style apps as bloatware is a definite improvement over older styles of bloatware. Unfortunately, this type of bloatware has not replaced traditional desktop bloatware, and new Windows PCs will generally have both. Windows RT is Immune to Typical Bloatware, But… Microsoft’s Windows RT can’t run Microsoft desktop software, so it’s immune to traditional bloatware. Just as you can’t install your own desktop programs on it, the Windows RT device’s manufacturer can’t install their own desktop bloatware. While Windows RT could be an antidote to bloatware, this advantage comes at the cost of being able to install any type of desktop software at all. Windows RT has also seemingly failed — while a variety of manufacturers came out with their own Windows RT devices when Windows 8 was first released, they’ve all since been withdrawn from the market. Manufacturers who created Windows RT devices have criticized it in the media and stated they have no plans to produce any future Windows RT devices. The only Windows RT devices still on the market are Microsoft’s Surface (originally named Surface RT) and Surface 2. Nokia is also coming out with their own Windows RT tablet, but they’re in the process of being purchased by Microsoft. In other words, Windows RT just isn’t a factor when it comes to bloatware — you wouldn’t get a Windows RT device unless you purchased a Surface, but those wouldn’t come with bloatware anyway. Removing Bloatware or Reinstalling Windows 8.1 While bloatware is still a problem on new Windows systems and the Refresh option probably won’t help you, you can still eliminate bloatware in the traditional way. Bloatware can be uninstalled from the Windows Control Panel or with a dedicated removal tool like PC Decrapifier, which tries to automatically uninstall the junk for you. You can also do what Windows geeks have always tended to do with new computers — reinstall Windows 8 or 8.1 from scratch with installation media from Microsoft. You’ll get a clean Windows system and you can install only the hardware drivers and other software you need. Unfortunately, bloatware is still a big problem for Windows PCs. Windows 8 tries to do some things to address bloatware, but it ultimately comes up short. Most Windows PCs sold in most stores to most people will still have the typical bloatware slowing down the boot process, wasting memory, and adding clutter. Image Credit: LG on Flickr, Intel Free Press on Flickr, Wilson Hui on Flickr, Intel Free Press on Flickr, Vernon Chan on Flickr     

  Read the article

• Four Emerging Payment Stories

  - by David Dorf

  The world of alternate payments has been moving fast of late.  Innovation in this area will help both consumers and retailers, but probably hurt the banks (at least that's the plan).  Here are four recent news items in this area: Dwolla, a start-up in Iowa, is trying to make credit cards obsolete.  Twelve guys in Des Moines are using $1.3M they raised to allow businesses to skip the credit card networks and avoid the fees.  Today they move about $1M a day across their network with an average transaction size of $500. Instead of charging merchants 2.9% plus $.30 per transaction, Dwolla charges a quarter -- yep, that coin featuring George Washington. Dwolla (Web + Dollar = Dwolla) avoids the credit networks and connects directly to bank accounts using the bank's ACH network.  They are signing up banks and merchants targeting both B2B and C2B as well as P2P payments.  They leverage social networks to notify people they have a money transfer, and also have a mobile app that uses GPS location. However, all is not rosy.  There have been complaints about unexpected chargebacks and with debit fees being reduced by the big banks, the need is not as pronounced.  The big banks are working on their own network called clearXchange that could provide stiff competition. VeriFone just bought European payment processor Point for around $1B.  By itself this would not have caught my attention except for the fact that VeriFone also announced the acquisition of GlobalBay earlier this month.  In addition to their core business of selling stand-beside payment terminals, with GlobalBay they get employee-operated mobile selling tools and with Point they get a very big payment processing platform. MasterCard and Intel announced a partnership around payments, starting with PayPass, MasterCard's new payment technology.  Intel will lend its expertise to add additional levels of security, which seems to be the biggest barrier for consumer adoption.  Everyone is scrambling to get their piece of cash transactions, which still represents 85% of all transactions. Apple was awarded another mobile payment patent further cementing the rumors that the iPhone 5 will support NFC payments.  As usual, Apple is upsetting the apple cart (sorry) by moving control of key data from the carriers to Apple.  With Apple's vast number of iTunes accounts, they have a ready-made customer base to use the payment infrastructure, which I bet will slowly transition people away from credit cards and toward cheaper ACH.  Gary Schwartz explains the three step process Apple is taking to become a payment processor. Below is a picture I drew representing payments in the retail industry. There's certainly a lot of innovation happening.

  Read the article

• Will the Rosetta Stone online edition work with Ubuntu?

  - by Evan Carroll

  The Rosetta Stone Online Edition claims that it requires Windows: XP SP3, Vista SP2, or Windows 7 Mac (Intel based only): Leopard, Snow Leopard, or Lion (OS X 10.5 or higher) Internet Explorer 7, Firefox 3, Safari 3, Chrome 8 or greater Adobe Flash Player version 10.1 or greater Yet, I would guess if it works on Chrome and Firefox and only requires Flash versoin 10.1, it'd work on Ubuntu too... Can anyone confirm?

  Read the article

• Paul Frields on Fedora 12 and Beyond

  <b>Linux For You:</b> "Uptake of Fedora 12 has been very good overall. There have been a number of very visible improvements in free video drivers for ATI and Intel that make for a better experience out of the box. Those improvements allow users to make use of 3D effects on the desktop..."

  Read the article

• 15 Kasim 2012 Oracle Day

  - by TUFEKCIOGLU,FATIH

     15.Kasim'da Harbiye Istanbul Kongre Merkezi'nde düzenlenecek Oracle Day'e ait etkinlik bilgileri : Oracle Day etkinlik bilgileri için tiklayiniz    En Son Teknolojiden Faydalanin: Inovasyona ve Rekabete Zaman Birakin 15 Kasim 2012 Bulut Bilisim, Mobilite, Sosyal Medya ve Büyük Veri, bildigimiz dünyayi yeniden tanimliyor. Bu teknolojileri kurumuna ilk getirenlerden biri olun; daha hizli yeni ürün ve hizmet gelistirme, müsteri deneyimini iyilestirme ve yeni inovatif is modellerini hayata geçirme firsati yakalayarak rekabetteki konumunuzu güçlendirin. Oracle ve is ortaklari bu noktada size, teknolojik yenilikleri kurumunuza uyarlamanizda yardim ederken, sizin de piyasadaki degisimlerden rakiplerinizden önce avantaj elde etmenizi saglar. Oracle'in, birlikte çalismak için tasarlanmis olan yazilim ve donanimlarda en yeni teknolojileri kullanarak, bilgi teknolojilerini nasil sadelestirdigini ögrenmek için Oracle Day'de bize katilin. Oracle Day'de: Oracle'in Bulut Bilisim, Büyük Veri, Sosyal Medya, is uygulamalari çözümleri hakkinda bilgi edinme, Basarili is dönüsümleri hakkinda örnek basari hikayelerini dinleme, Sizinle ayni zorluklari tecrübe eden sektör çalisanlariyla biraraya gelme, Oracle uzmanlari ve is ortaklari ile tanisma ve yeni ürün tanitimlarini izleme, Oracle OpenWorld'den en yeni ürün bilgilerini edinme firsatini kaçirmayin... Saygilarimizla, Oracle Türkiye Hemen Kaydolun! Platin Sponsor Istanbul Kongre Merkezi Taskisla Caddesi Harbiye 34367 Istanbul / Türkiye 15 Kasim 2012, Persembe 08:30 - 18:30 LCV: [email protected] oracle.com/oracleday Bizi takip edin: #oracleday   Oracle Is Ortagi Müsteri Basari Hikayesi TROUG Sunum Ingilizce'dir  Günün Ajandasi 08:45-09:30 Kayit 09:30-10:00 Hos Geldiniz Filiz Dogan, Genel Müdür, Oracle Türkiye 10:00-10:30 Navigating Complexity by Simplifying I.T. Andrew Mendelsohn, Kidemli Baskan Yardimcisi, Oracle Veritabani Sunucu Teknolojileri, Oracle           10:30-11:00 Dönüsümsel Bulut Yolculugu Ilker Kuruöz, CIO, Turkcell 11:00-11:20 Yeni Dönemde Veri Merkezlerinin Olmazsa Olmazlari Yalim Eristiren, Genel Müdür Yardimcisi, Intel 11:20-11:30 Slimfit Feyza Narli, Is Çözümleri Direktörü, Innova 11:30-12:00 Java ile Inovasyon Cuma Yigit, Teknik Mimar, Etiya Yusuf Tok, Java Grup Yöneticisi, OBSS Ersun Engel, Satis Müdürü, Oracle 12:00-12:10  Kahve Molasi       1. SALON 2. SALON 3. SALON 4. SALON 5. SALON 6. SALON 7. SALON 8. SALON 9. SALON 10. SALON   Müsteri Deneyimi: Çalisaninizi Yetkinlestirin. Markanizi Güçlendirin. Is Süreçlerinde Degisim Daha Fazla Veri, Daha Hizli Sonuç: Isinizi Analitik Çözümlerle Güçlendirin Peki Ama Nasil? Bulut Uygulayicilari için Çözüm Haritasi Is Uygulamalarinizda Inovasyonun Gücünü Kullanin Yeni Nesil Veri Merkezi ile BT'nin Gücünü Ortaya Çikartin Oracle & Is Ortaklari Çözümleri - Basari Hikayeleri I Oracle & Is Ortaklari Çözümleri - Basari Hikayeleri II Oracle Finansal Hizmetler - Core Banking and Analytical Solutions Oracle User Group (TROUG) 12:10-12:40 Müsteri Deneyimi: Çalisaninizi Yetkinlestirin. Markanizi Güçlendirin. Tekfen Ceyhan Çelik Fabrikasi Maliyet Yönetimi ve Üretim Takibi Daha Fazla Veriyle, Daha Hizli Hareket: Yaraticiligi Aksiyonla Güçlendirme Architect Your Cloud: A Blueprint for Cloud Builders Technology Strategies that Drive Business Excellence: Get Social. Be Mobile. Run Cloud. Yeni Nesil Veri Merkezi ile BT'nin Gücünü Ortaya Çikartin Innovate with Oracle - Virtual Banking and Self Service Channels What's Next for Oracle Database?   Oracle Innova Oracle Oracle Oracle Oracle Oracle Oracle 12:40-13:40 Ögle Yemegi 13:40-14:10 Uygulamalariniz Artik Bulutta 21. Yüzyilda Finans: Potansiyeli Kullanin - Sonuçlara Ulasin! "Düsünce Hizinda" Intel Islemcili Oracle Büyük Veri ve Is Analitigi Çözümleri Deniz Seviyesinden Bulutlara I CRM'inizi Sosyallestirin: Telaura Sosyal CRM Yeni Nesil Veri Merkezinde Trend: Sadelik Abone Bilgi Yönetim Sistemi (ABYS) Yüksek Oracle Veri Tabani Performansi - Oracle Veri Tabani Oracle Veri Depolama Sistemi ile Entegre Oldugunda Sigortacilikta Finansal Transformasyon ve Entegre Veri Ambari Çözümleri SQL/PLSQL Yeni Özellikler   Oracle Oracle Intel Oracle Etiya Oracle Inspirit Oracle Oraturk TROUG 14:10-14:20  Kahve Molasi 14:20-14:50 Satis ve Pazarlamada Sosyal Mecralar Müsteri Basari Hikayeleri Paneli: Degisim Yolculugu ve Sonuçlari Tukas'in Analitik Yolculugu Deniz Seviyesinden Bulutlara II Loupe: IP Tabanli Servisler için Proaktif Izleme Veri Merkezinizdeki Riskleri Ortadan Kaldirin Oracle iAS to WebLogic Migrasyonu Oracle ZFS Storage Appliance - Turkcell Deneyimleri Analytical Transformation - Risk and Finance Together to Address the Regulatory Changes Today and Tomorrow Veri Madenciligi Veritabaninda Yapilir: Uygulamalariyla Oracle R Enterprise ve Oracle Data Mining Opsiyonu   Oracle Akbank, Teknosa, Dogus Holding, Ceynak Gtech Oracle Netas Oracle OBSS Turkcell&Gantek Oracle TROUG 14:50-15:00  Kahve Molasi 15:00-15:30 Yetenek Yönetiminde Entegre Çözümler: Taleo ile Ise Alim Artik Daha Kolay Müsteri Basari Hikayeleri Paneli: Degisim Yolculugu ve Sonuçlari Büyük Veri & Exalytics - Exadata'nin Gelecek Rotasi - Bütünlesik (Engineered) Sistemler'de Ücretsiz Platin Hizmetleri Aksigorta Oracle ATS (Application Testing Suite) ile Uygulamalarini Nasil Test Ediyor? Üstün Performans ve Esneklik ile Servis Seviyenizi Arttirin Akilli Belediyecilik Uygulamalarinda Oracle BPM ile Süreç Yönetimi Teyp ile Uçtan Uca Yedekleme Çözümleri Connecting with Customers to Enhance Revenue Generation: Unleashing the Power of an Enterprise Revenue Management and Billing Solution Günümüzün Uygulama Mimarisi Sorunlari ve Çözüm Önerileri   Oracle Akbank, Teknosa, Dogus Holding, Ceynak Oracle Oracle Aksigorta Oracle Sampas Remivac Oracle TROUG 15:30-15:40  Kahve Molasi 15:40-16:10 JD Edwards Yeni Sürüm ile Satis Agi Yönetimi Oracle Policy Automation ile Türkçe Merkezi Is Kurallari Yönetimi Oracle BI ile Kurumsal Karne Çözümleri Turkcell Süperbulut ile Yazilim Artik Hizmetinizde Bütünlesik (Engineered) Sistemler Artik SAP Müsterilerinde de Fark Yaratiyor Yeni Nesil Veri Merkezi Olusturma: Denenmis ve Ispatlanmis Yöntemler Türk Telekom SOA Projesi Basari Hikayesi Yapi Kredi Sigorta Uygulamalarinda Son Kullanici Deneyimini Nasil Izliyor? 2013 NFC Trendleri Karagöz ile Hacivat Veri Tabaninda   TupperWare & Akademi Danismanlik Oracle Oracle Turkcell Oracle Oracle Türk Telekom Yapi Kredi Sigorta Smartsoft TROUG 16:10-16:20  Kahve Molasi 16:20-16:50 Tutarli, Tekil Veriye Yolculuk: Oracle Ana Veri Yönetimi Turkcell/Superonline'da Varlik Yönetimi Her Tür Verinin Endeca ile Rahat Analizi Bulut Bilisim'de Güvenlik Nasil Saglanir? Rekabette Kazanmak: GoldenGate ile Dogru Kararlari Rakiplerinizden Önce Verin. Veri Merkeziniz için Bulut Altyapi Stratejileri Oracle Orkestrasi: Çok Sesli Yönetime Kulak Verin Lojistik Zekasi / Horoz Lojistik Basari Hikayesi Bütünlesik Sistemler (Engineered Systems) ile Yüksek Performansli Java Uygulamalari International Growth - Helping the Banks Standardize Overseas Operations Oracle Big Data   Oracle Turkcell Oracle Oracle Oracle Oracle Kora & Horoz Lojistik Oracle Oracle TROUG 16:50-18:30  Kokteyl     Eger bir kamu kurumunun/kurulusunun çalisani veya görevlisi iseniz, bu etkinlige iliskin önemli etik kurallara iliskin bilgi için lütfen buraya tiklayiniz Copyright 2012, Oracle and/or its affiliates. All rights reserved. Bize Ulasin | Yasal Uyarilar | Gizlilik Beyani

  Read the article

• Fedora presents...Graphics Test Week this week

  <b>Fedora:</b> The Fedora project announces that this week is Graphics Test Week. This is the highlight of the Fedora 13 Test Day cycle, with Test Days for NVIDIA, ATI/AMD and Intel graphics all falling this week.

  Read the article

• Why is Star Craft II lagging with these specs? [closed]

  - by Kev

  17.3" FULL HD (1920X1080) LED LCD w/nVIDIA GeForce® GT 425M w/1GB GDDR3 + Intel GMA HD4500 i also got the 640m core i7, i have 8 gb ram but for some damn reason, when there is a batle in progress it appears as if my graphics card or something is not powerful enough, shouldn't these specs be more than enough to handle star craft II? what could i do to improve my laptop? i also got the 64 bit os

  Read the article

• Virtualization: An easy way to kill Apple's HTC lawsuit

  <b>Tech Broiler:</b> "Intel's Wind River Hypervisor and technologies like it could usher in a new age of Device-agnostic Smartphone Operating Systems and unprecedented customer choice"

  Read the article

• Ubuntu Netbook Remix on the Acer Aspire One

  <b>Linux Journal: </b>"In preparation for this year's annual motorcycle trip, I purchased an Acer Aspire One Intel Atom N450 netbook. What follows are a few notes and suggestions for installing Ubuntu Netbook Remix (UNR) 10.04 on this model."

  Read the article

• Dual booting 12.10 and Win 7 - boots directly to Win 7

  - by user110174

  and thank you kindly for you help! I'll preface this with saying that I realize this is a common problem, with lots of trouble-shooting guides available online; however, after multiple attempts with different guides, I've made zero progress and am hoping to someone could help me with my specific scenario. First, my story: -Initially, I installed Ubuntu 12.10 with the "Something Else" option with no problems. Used 4 GB Swap Logical Partition, 26 GB Primary Root Partition. Wanting to trying out Mint 13, I booted into Windows from GRUB2, used the latest version of EasyBCD (v2.2) to restore the Windows 7 bootloader to the MBR, deleted the Ubuntu partitions, reformatted them in NTFS. I then created a 30 GB partition of free space for Mint. I installed Mint using the same partitioning described above for Ubuntu 12.10, using /dev/sda for the boot installation files, and everything seemed to go well, until I re-booted my computer and it went straight to Windows - I could find no way to get into Mint. So I went into windows, restored windows bootloader to the MBR w/ EasyBCD, deleted partitions, etc., as I figured I'd done enough messing around and would go with Ubuntu 12.10. Now the problem: I restarted my computer booting from the same Ubuntu USB key I originally used. Briefly, "error: "prefix" is not set" flashed on screen, and instead of being greeted with the GUI menu of "try vs. install Ubuntu", there was a menu with minimal graphics (like a BIOS menu) where I could select install, run from USB, etc. After selecting "Install Ubuntu", the familiar install wizard with a GUI came up, I partitioned my drive as described, /dev/sda for the boot installation files, install went well, rebooted and...straight to Windows. This is where I'm at. Fixes I've tried: -This guide: How can I repair grub? (How to get Ubuntu back after installing Windows?) to ensure Grub is on the MBR. I followed all steps, but still when I reboot, I go directly into Windows. -Installing 12.04 instead of 12.10 - same issue -Re-installed Ubuntu, writing the boot files to their own partition, then using EasyBCD to to add a boot option for Ubuntu using the Windows bootloader, ensuring I instruct EasyBCD to look at the partition I created with the Ubuntu installer (instructions here http://neosmart.net/wiki/display/EBCD/Ubuntu). When I reboot, I select the Ubuntu option, and it puts me in GRUB4DOS, with a cursor waiting for input. I have no idea what to put here, so I would just type "reboot" to exit out. And this is where I am now. Any clue as to why I can't boot into Ubuntu? My computer specs are: ASUS UX31A Core i7, Win 7 64 Pro, 256 GB SSD, Intel HM76 Chipset and Integrated Intel HD 4000 Graphics, 4 GB memory I've tried to be as clear as possible, but I'd be happy to provide any info that would help anyone along. Thanks for your patience in reading this! Sincerely, -MN

  Read the article

• Static background noise while using new headset Ubuntu 13.04

  - by ThundLayr

  Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

  Read the article

• All-in-one PC has dual-core Atom

  <b>Desktop Linux:</b> "Shuttle announced a compact, all-in-one PC featuring a 15.6-inch touchscreen and a dual-core Intel Atom D510 available with SUSE Linux. The X50V2 includes a 1366 x 768 display, webcam, 4-in-1 card reader, a 2.5-inch hard drive bay, and up to 4GB of RAM, says the company."

  Read the article

• Problem in installation in My Hp g4 1226se

  - by vivek Verma

  1vivek.100 Dual booting error in Hp pavilion g4 1226se Dear sir or Madam, My name is vivek verma.... I am the user of my Hp laptop which series and model name is HP PAVILION G4 1226SE........ i have purchase in the year of 2012 and month is February.....the windows 7 home basic 64 Bit is already installed in in my laptop.... Now i want to install Ubuntu 12.04 Lts or 13.10 lts..... i have try many time to install in my laptop via live CD or USB installer....and i have try many live CD and many pen drive to install Ubuntu ... but it is not done......now i am in very big problem...... when i put my CD or USB drive to boot and install the Ubuntu......my laptop screen is goes the some black (brightness of my laptop screen is very low and there is very low visibility ) and not showing any thing on my laptop screen..... and when i move the my laptop screen.....then there is graphics option in this screen to installation of the Ubuntu option......and when i press the dual boot with setting button and press to continue them my laptop is goes for shutdown after 2 or 5 minutes..... ...... and Hp service center person is saying to me our laptop hardware has no problem.....please contact to Ubuntu tech support............. show please help me if possible..... My laptop configuration is here...... Hardware Product Name g4-1226se Product Number QJ551EA Microprocessor 2.4 GHz Intel Core i5-2430M Microprocessor Cache 3 MB L3 cache Memory 4 GB DDR3 Memory Max Upgradeable to 4 GB DDR3 Video Graphics Intel HD 3000 (up to 1.65 GB) Display 35,5 cm (14,0") High-Definition LED-backlit BrightView Display (1366 x 768) Hard Drive 500 GB SATA (5400 rpm) Multimedia Drive SuperMulti DVD±R/RW with Double Layer Support Network Card Integrated 10/100 BASE-T Ethernet LAN Wireless Connectivity 802.11 b/g/n Sound Altec Lansing speakers Keyboard Full size island-style keyboard with home roll keys Pointing Device TouchPad supporting Multi-Touch gestures with On/Off button PC Card Slots Multi-Format Digital Media Card Reader for Secure Digital cards, Multimedia cards External Ports 1 VGA 1 headphone-out 1 microphone-in 3 USB 2.0 1 RJ45 Dimensions 34.1 x 23.1 x 3.56 cm Weight Starting at 2.1 kg Power 65W AC Power Adapter 6-cell Lithium-Ion (Li-Ion) What's In The Box Webcam with Integrated Digital Microphone (VGA) Software Operating System: Windows 7 Home Basic 64bit....Genuine..... ......... Sir please help me if possible....... Name =vivek verma Contact no.+919911146737 Email [email protected]

  Read the article

• How do I keep my Huawei E3131 3G modem from unmounting?

  - by John Perez

  I need help getting my Huawei E3131 modem to (consistently) work. I am currently running Ubuntu 12.04.2 and 3G dongles have worked many times before. However, my newly acquired Huawei E3131 is causing problems. When plugged in, Ubuntu detects the device as a CD-ROM and a modem. I can browse the dongle's contents using Nautilus and Network Manager is able to configure and work the dongle out-of-the-box. I can even get to surf. However, within minutes, the connection drops and the CD-ROM is unmounted. I wait about 15 seconds, then the CD-ROM mounts again and Network Manager is able to connect again with short-lived surfing. Rinse, lather and repeat. It's strange that the device mounts as a CD-ROM, but works as a modem, too, suggesting that mode switching happens somewhere. It's not a signal coverage problem, either because I tested the same SIM card using 3 other different dongles (2 ZTEs and another Huawei) and it is only this E3131 that has this problem. If pertinent, the other dongles weren't being detected as CD-ROMs. Output of lsusb Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0ac8:c342 Z-Star Microelectronics Corp. Bus 001 Device 010: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard Bus 001 Device 004: ID 0a5c:219b Broadcom Corp. Bluetooth 2.1 Device I tried installing the drivers found here, but no fish. Furthermore, my device is an E3131, but lsusb for some reason detects it as an E398. I'm not sure how that plays a role for this problem, though. I hope someone out there can help me. I'm out of ideas already. Thank you very much!

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >