Search Results

Search found 8977 results on 360 pages for 'laptop battery'.

Page 67/360 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • How to turn off ATI adapter on Acer Timeline 4810G with ubuntu 9.10

    - by netimen
    I can't turn off my ATI adapter. I have applied the fix, but still lspci | grep VGA gives 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] (rev ff) and my power consumption is about 15W (Wi-Fi on). I run ubuntu 9.10, kernel 2.6.31-14-generic. BIOS version 2.30

    Read the article

  • Can all notebooks record from the sound card?

    - by Stefan Walter
    Is it possible that a modern notebook (say built in the last 5 years) contains a (onboard) sound card that it is not possible to record from? I've always assumed that this is a very basic capability, but since I can't get it to work, I would like to check that before I put any more effort into it. In case it matters, my notebook is an ASUS UL50VT, I'm trying with Sound Recorder and Audacity under Ubuntu, but I am, at this point, not asking for "Try that"-support or software recommendations.

    Read the article

  • Can I fine-tune my screen brightness? (Ubuntu Studio, Thinkpad T420s)

    - by Dan S
    I am in a similar situation as question Can I fine-tune my screen brightness? . For me, Thinkpad T420s and Ubuntu Studio 11.10. The brightness keys work fine but the increments are too large. I have the /sys/class/backlight/acpi_video0 and I can see the value of actual_brightness changing as I use the brightness keys - it changes between values 0,3,6,9,12,15. None of the listed answers for fine control works here, as follows: As the root user I can echo integers to brightness in the above folder. As an ordinary user I cannot. I do not have /usr/sbin/gnome-power-backlight-helper (because I'm using xfce perhaps?), and not sure what package it's from or if installing such a package would make sense since it's not what's currently managing the backlight. How can it be done, please?

    Read the article

  • Laptop loses signal from WiFi router, but mobile phone holds it fine

    - by Anton
    Hi, I have an extremely weird issue with my WiFi router. Both Ubuntu & Windows 7 can connect to it fine, but after 5-10 minutes browser (any one) stops opening pages and tells me it cannot resolve host address. But, at the same time, tools like Skype or BitTorrent work without any issues. I can also browse Internet on my mobile phone connected to the very same router. If I reset router it helps, but after 5-10 minutes I see just the same problem... Ubuntu tells me that WiFi signal is lost (mobile sees it), Windows 7 just won't let me browse anywhere. Can anyone give me a suggestion on this, please? Thanks

    Read the article

  • Static noise coming from my laptop

    - by joanna
    Replaced motherboard; speakers; put in an additional fan; but this did not stop the static noise. This was done by inhouse tech. support from Sony. If i turn my speakers mute; the sound is still there! Can't hear it through headphones. I was told it is feedback noise! Now I'm suppose to send my $2,000.00 computer through the mail to get fixed? I'm terrified it'll come back in terrible condition during the travel time? Help?

    Read the article

  • Iam unable to convert magnet link into a torrent link.on a company owned laptop

    - by najam
    Firefox magnet link issue or if right click on the magnet link and copy this is the result of paste (http://proxychina.net/browse.php?u=Oi8vdGhlcGlyYXRlYmF5LnN4L3RvcnJlbnQvODY0MjU1MC9tYWduZXQ6P3h0PXVybjpidGloOmQzNzMyMmQxMGFmNDY4Yzg4NTk3ZWZiNWU4NWQ5ZmRhMzU1MzllYTQmZG49RmFzdCtBbmQrRnVyaW91cys2JTVCMjAxMyU1RFdFQlJpcCtYdmlELUVUUkcmdHI9dWRwJTNBJTJGJTJGdHJhY2tlci5vcGVuYml0dG9ycmVudC5jb20lM0E4MCZ0cj11ZHAlM0ElMkYlMkZ0cmFja2VyLnB1YmxpY2J0LmNvbSUzQTgwJnRyPXVkcCUzQSUyRiUyRnRyYWNrZXIuaXN0b2xlLml0JTNBNjk2OSZ0cj11ZHAlM0ElMkYlMkZ0cmFja2VyLmNjYy5kZSUzQTgwJnRyPXVkcCUzQSUyRiUyRm9wZW4uZGVtb25paS5jb20lM0ExMzM3&b=31) Strange but two different links Please a prompt reply is appreciated..many thanks in advance

    Read the article

  • Windows 7 breaks even in safe mode

    - by delenda
    Hi, I have a Dell XPS M1730 with Windows 7 installed. I noticed last night that after a few hours of use, the fans kicked into full and I couldn't do anything without it taking forever. Minimising windows, opening device manager or even opening process explorer took minutes and a game install I had just started took nearly 4 hours to complete. When procexp finally loaded, the refresh was so slow that it was mostly useless. From what I could gather, it was reporting 60% idle processes with procexp using nearly 40%. There were no hardware interrupts listed. When I rebooted, the problem went away for about 10 minutes and then the same thing happened. The issue persists in safe mode and even after I removed the graphics drivers, which have been an issue in the past, it still happens. Icons flash quite quickly on the desktop periodically and screen refresh is painfully slow. When booting now, the fans kick in to full as soon as the windows logon box comes up and it's taking 10 minutes to bring the desktop up. Chkdsk reports nothing and the raid check says that everything is fine. I'm thinking hardware failure, probably HDD but wanted some other opinions. I'm planning to try a linux live cd to see if it works without using the hard disks. If anyone has any input, it would be greatly appreciated. Delenda

    Read the article

  • cdrom drive doesn't work on laptop

    - by bozdoz
    Here's as best as I can describe it: When starting up, the boot order doesn't recognize the cdrom drive, but I can open and close the drive during this time. In Windows 7, I can't open the cdrom drive, and it doesn't recognize it in device manager, disk management, or my computer. In Ubuntu Linux, I can open the cdrom drive, but it still doesn't recognize the cds, and it won't mount. If I reformat everything, would my cdrom drive work again? Can I reinstall Windows without a cdrom drive? I've deleted the upper and lower filters as was suggested in Google searches. Took the disk drive out and checked that it was installed correctly (no reason it shouldn't have been). Still: nothing works.

    Read the article

  • What to do with old laptop screens?

    - by Lord Torgamus
    This question is inspired by another SU question I came across earlier today: What to do with old hard drives? It made me think about two long-dead laptops I have with perfectly good screens still inside. One is a Dell Inspiron 5100 and the other is an Averatec E1200, but responses need not be geared towards those particular models' screens. Rules, based heavily on the original question's: Objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, be plain ol' fun, serve a social purpose or benefit the community. Your answer need not be limited to only one screen. For a really good answer, I'll go out and buy additional leftover screens. Your answer need not be limited to one project per screen. If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a useful purpose; art is nice, but functional art is way better. Thanks in advance, folks. EDIT: Found another related question. Fun projects to do with an old 17" LCD monitor EDIT 2: I, for one, am enjoying the new outpouring of creativity here. Best fifty bucks... I mean, rep points... I ever spent. EDIT 3: That does it. At the end of the week, there was a tie for most votes between the accepted answer and the game platform answer. The game platform answer was cooler, but less reasonable as a project to actually do; in other words, it was more moon rocky. Unfortunately, I think fencepost had the best comment on the topic, which is that displays on their own have no good interface. Thanks for playing, everyone!

    Read the article

  • HP Pavilion dv3 volume control display driver on Windows 7

    - by Farinha
    I've recently bought an HP Pavilion dv3-2150ep and I'm having a hard time getting the volume control display to work as expected. The control is a back-lit touch-sensitive bar above the keyboard. Now the buttons to turn the volume up and down actually do it, but the lightning is not changing at all. The mute button does change color when toggled. I'm not sure if I'm missing any drivers here (I've installed all of those on the HP support page that seem to have something to do with sound and/or display) or if I have to activate this somewhere. Any ideas?

    Read the article

  • No Drivers in Ubuntu 9.10

    - by Chris
    I have a Lenovo G550 and I installed Ubuntu on it through Windows and I have no drivers. No sound, no wireless. I previously had installed it through Windows Vista with no problems at all. I now run Windows 7 and cannot seem to get it to function properly. I tried installing the recommended drivers to make sure the proper ones were installed and that still did nothing. Any one have ANY idea what could be happening? I just don't feel like dealing with it.

    Read the article

  • Laptop seemingly randomly "freezes" to the point of no longer executing applications

    - by Aierou
    After upgrading to Windows 8 pro on my Samsung Series 7 Chronos NP700Z5C-S04US (may be relevant, I'm not sure), my computer began to stop allowing the execution of any service or application, as well as discontinuing the update of the clock until a hard shutdown was performed. This seems to occur randomly after periods of inactivity and I've no idea the cause. These are measures I have already taken in order to attempt to stop this: -Obviously Googling potential answers to this problem -Updating all drivers -Researching all events that have occurred around the time of the failure to respond (with no results) -I tried applying "bcdedit /set disabledynamictick no" which was a hotfix for what seemed to be the same error but was not. Here is some more, potentially related, information about the error: -No BSOD (actually, I haven't at all experienced a BSOD with Windows 8) -Computer seems to have a problem shutting down/restarting most of the time (Hangs at the point where it should completely turn off) -New sound instances are not able to play, but previously loaded containers function properly -As mentioned before, the clock freezes at the time of the error -USB devices function properly -Servers that I was running fail to respond on my end, but stay online. If you require more information, please request it specifically and I will be happy to oblige. Thanks.

    Read the article

  • Overheating on Ubuntu 12.04

    - by mati
    I have a Dell Inspiron Q17R with two graphic cards and I noticed that it is overheating. I installed Bumblebee, Jupiter and Flashblock, and I followed this guide as well, but it still got up to 74C. Is there anything more I can do? It still doesn't really seem to be working well and the fan keeps spinning really fast. After performing the following test: sensors in the terminal, this is what I got: Adapter: Virtual device temp1: +75.0°C (crit = +100.0°C) temp2: +75.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +65.0°C (high = +86.0°C, crit = +100.0°C) it doesn't look good.

    Read the article

  • Tracking down laptops Google has never heard of

    - by John
    Using MS tools to get information on PCs using our software, our customers have sent several Lenovo systems which have names we simply cannot find using Google... no search results at all. Considering these names/ids are returned by querying the system directly, not asking the customer to write it down by looking at the box, this seems odd. The ones we have so far (more than one of each) are: Lenovo 2241BL9 Lenovo 6463Y4H My guess is these are Thinkpads after Lenovo took over the brand, but can anyone help me out with this detective work? edit: the 2nd one does turn up some driver downloads and this page, but it's unclear what any of that means. Is the 6463y4h just a T61? http://smolts.org/reports/view_profile/%20ThinkPad%20T61

    Read the article

  • XP Laptop Restarting

    - by Liath
    I have a Dell 1525 which I reinstalled xp on recently due to a hard disk problem. Apparently I've missed something, it's taken to restarting for no apparent reason (I believe it's too frequent for windows updates which was my first thought). Last night it was particularly bad, it stopped 5 times in 2 hours while playing an online game. I can't actually think of a time it's happened when it's not running something in full screen mode. I can't see anything in the event log apart from usual start up details. How can I find and fix this issue?

    Read the article

  • Broken screen on laptop?

    - by John
    I recently damaged the screen on my HP Notebook...now my main concern is that I have Roboform installed and on my taskbar. The trouble is, because the screen is totaled, I can't see anything, and I discovered, to my horror, that I haven't backed any of the IDs and passwords up to a text document. Of course, I cannot access any of my content that hosts an ID name and password at all unless I can access Roboform that is installed on the notebook! Now hopefully I have ordered a SATA/USB cable to access the hard drive that I now removed form the notebook will I be able to access roboform that way and ALL the log-in details?

    Read the article

  • Windows 8 on HP Laptop crashes when waking up from sleep

    - by Chris
    I always put it to sleep at night, but when I try and turn it on I hit the keyboard to activate it and a Windows screen pops up saying and error has occured. It collects data then reboots and offers to send an error report. Note this only appears to happen when I'm at home and it's hooked up to 2 monitors and 3-4 USB devices. When it's not connected to everything it looks like sleep actually works. HP DV7 XG300AV

    Read the article

  • Option and command keys in Mac OS X are swapped and keyboard preferences do not set them back.

    - by bikesandcode
    On my MacBook Pro, I occasionally use external keyboards, generally Windows ones and things have been fine. Yesterday, I plugged in a new one, remapped the command/option keys so the windows/alt keys were in the same configuration, again, nothing new here. However, this time when I unplugged the USB keyboard, the laptops option/command keys remained switched. More annoying is that if I go into the System Preferences - Keyboards - Modifier keys, remapping the keys to actions does not work. I can use the drop downs to disable any specific keys, but switching the behaviours does nothing. (Cmd/Option obvious, tried remapping anything to caps lock and a few other combinations, no joy. Restore defaults set the configuration to what I'd expect, but the settings are evidently ignored.) So: Any ideas?

    Read the article

  • Can't decide on a new distro

    - by Alex W
    I've had Ubuntu (9.10) on my netbook in the past and I really liked it. I'm currently running Fedora and feeling like I should "change it up" again. I've played around with Ubuntu 10.04 Lucid a little, and so far I'm very impressed. I've always wanted to try Arch, but I'm worried I won't have the driver support I need for all the non-standard hardware in a netbook. Does anybody have a suggestion for a new distro to try? I'm preferably looking for something feature-rich over light-weight, and something that I can have up and running with a minimum of configuration (at least partially working). Thanks!

    Read the article

  • My Hard Drive isn't Working

    - by MeCB
    I never use Safely Remove Hardware with Windows XP. It has been working for me for years with my SD card, mouse, hard drive and memory stick. My hard drive has a USB cable and power cord so I can hook it up to any desktop hard drive. Now my hard drives don't like this and I did not know this till now. I am always careful and to wait till it is all finish accessing the USB before I unplug it. Now three of my hard drives can't be seen by Windows, though the others still work. when I hook it up to another computer it works fine. I use the same USB cable to hook up all of my hard drives one at a time. So my USB cable is good. I think that when I unplugged the hard drive this one time, it had a file it still wanted to see and now only this drive does not work only this computer. Then the same thing happens to my other two hard drive after I used it for a week with the same cables. How can I fix this?

    Read the article

  • How can I extract data from Toshiba Satellite with a dead Windows installation?

    - by msanford
    I've got a Toshiba Satellite (unknown model number but bought early 2010) running Windows Vista which throws a kernel error on boot. We don't have the restore/recovery CD any more to restore the Windows partition. I have managed to boot to a Live CD version of Ubuntu 10.10 and have mounted the internal hard drive (which takes nearly 8 minutes). I suspect that the hard drive is malfunctioning, however, because copy tasks of even 30 megs of data to an attached and mounted USB flash drive takes over an hour, and some files are mysteriously inaccessible (not a permissions issue). When browsing folders, it takes many minutes to populate the folder window even with a single tiny file. During the copy tasks, the hard disk sounds like it tries to sleep several times in rapid succession, then continues accessing, it sounds, at full throughput. I initially tried using scp (from the shell) to copy data but I encountered the same local problems. I don't know the S.M.A.R.T. status of the hard disk, either. Is there a more effective way of going about recovering the data on the internal disk, assuming that I can't use a recovery CD and am too cheap to bring it in (for now, at least)?

    Read the article

  • Sharing wifi connection

    - by andser
    I have some little problem while sharing wifi connection. I have 2 laptops. I need connection scheme like this: laptop1 [wlan0] >>>>>>>> laptop2 [wlan0] (in ad-hoc mode, as ap, etc) >>>>> laptop2 [wlan1] >>>> internet. laptop1 [wlan0] connecting to laptop2 [wlan0]. laptop2 connecting to internet through wlan1. Is it possible? OS: Ubuntu on both machines I tried this man (setting laptop2 wlan0 in ad-hoc mode): https://help.ubuntu.com/community/WifiDocs/Adhoc#Network_Manager laptop1 connects to laptop2, but can't access to internet.

    Read the article

  • How to disable my laptop's defective keyboard?

    - by Kolink
    I have an Alienware M17x R2, and after a couple years of use I started having problems with the keyboard: Intermittently, and without warning or apparent cause (even if I'm not touching the computer), the S key (and more recently the D key) will start firing incessant signals until I hit the offending key. I've been using a USB keyboard, which is conveniently exactly the right size to fit over the built-in keyboard without touching any buttons. However, even as I type the defective keyboard will fire its stream of signals. I have contacted Dell about this, twice in fact. The first time, I was just bluntly told that they don't ship replacement keyboards. The second time I was told that they did, but they were out of stock and they would contact me when they were in stock again. They haven't contacted me since. I can't seem to work out which device to disable in the device manager. Here's a screenshot of what I have: None of the keyboard devices have "Disable" in their context menus, only "Uninstall"... so you'll understand if I'm hesitant to try anything myself. Any advice on how to fix this?

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >