Search Results

Search found 9982 results on 400 pages for 'state monad'.

Page 67/400 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • ?????Exadata????

    - by Liu Maclean(???)
    ??check Exadata Image & OS versions , GI & DB patches sundiag exacheck cellserv ==> imageinfo dbhost ==> /usr/local/bin/imagehistory Also check the version of the switch. Login to Switch and execute the following command [root@myswitch-1 sbin]# version [root@dmorlsw-ib2 sbin]# cd /usr/local/bin [root@dmorlsw-ib2 bin]# ls -lrt version -rwxr-xr-x 1 root root 20356 Apr 4 2011 version Output will look as below. [root@dmorlsw-ib2 ~]# version SUN DCS 36p version: 1.3.3-2 Build time: Apr 4 2011 11:15:19 SP board info: Manufacturing Date: 2009.05.05 Serial Number: "NCD3X0178" Hardware Revision: 0x0006 Firmware Revision: 0x0102 BIOS version: NOW1R112 BIOS date: 04/24/2009 ib8# cat /sys/class/infiniband/is4_0/fw_ver 7.2.300 ib8 # cat /sys/class/dmi/id/bios_version NOW1R112 ib8 # nm2version NM2-36p version: 1.0.1-1 Build time: Sep 14 2009 12:52:51 ComExpress info: Manufacturing Date: 2009.08.19 Serial Number: Hardware Revision: 0x0006 Firmware Revision: 0x0102 { case `uname` in Linux ) ILOM="/usr/bin/ipmitool sunoem cli" ;; SunOS ) ILOM="/opt/ipmitool/bin/ipmitool sunoem cli" ;; esac ; ImageInfo="/opt/oracle.cellos/imageinfo" ; uname -srm ; head -1 /etc/*release ; uptime | cut -d, -f1 ; $ILOM "show /SP system_description system_identifier" | grep = ; $ImageInfo -activated -node -status -ver | grep -v ^$ ; } | tee /tmp/ExaInfo.log $GRID_HOME/OPatch/opatch lsinv -all -oh $GRID_HOME | tee /tmp/OPatchInv.log $ORACLE_HOME/OPatch/opatch lsinv -all | tee -a /tmp/OPatchInv.log cat /tmp/ExaInfo.log Linux 2.6.18-128.1.16.0.1.el5 x86_64 ==> /etc/enterprise-release <== Enterprise Linux Enterprise Linux Server release 5.3 (Carthage) ==> /etc/redhat-release <== Enterprise Linux Enterprise Linux Server release 5.3 (Carthage) 20:37:56 up 458 days system_description = SUN FIRE X4170 SERVER, ILOM v3.0.6.10.b, r52264 system_identifier = Sun Oracle Database Machine Active image version: 11.2.1.2.3 Active image activated: XXXX-XX-XX 12:27:12 +0800 Active image status: success Active node type: COMPUTE Inactive image version: undefined FileName: OPatchInv.log ---------------- ... Oracle Home       : /u01/app/11.2.0/grid Central Inventory : /u01/app/oraInventory   from           : /etc/oraInst.loc OPatch version    : 11.2.0.1.2 OUI version       : 11.2.0.1.0 OUI location      : /u01/app/11.2.0/grid/oui ... -------------------------------------------------------------------------------- List of Oracle Homes:   Name                                       Location   Ora11g_gridinfrahome1         /u01/app/11.2.0/grid   OraDb11g_home1                  /u01/app/oracle/product/11.2.0/dbhome_1 -------------------------------------------------------------------------------- Installed Top-level Products (1): Oracle Grid Infrastructure                                           11.2.0.1.0 ... Interim patches (2) : Patch  9524394      : applied on Thu Jun 03 20:46:05 CST 2010 ... {TRACKING BUG FOR 11.2.0.1 DB MACHINE BUNDLE PATCH 3} Patch  9455587      : applied on Fri Apr 02 18:27:47 CST 2010 ... {MERGE REQUEST ON TOP OF 11.2.0.1.0 FOR BUGS 8483425 8667622 8702731 8730804} Rac system comprising of multiple nodes  Local node = dbserv01  Remote node = dbserv02  Remote node = dbserv03  Remote node = dbserv04 -------------------------------------------------------------------------------- OPatch succeeded. ... Oracle Home       : /u01/app/oracle/product/11.2.0/dbhome_1 ... Oracle Database 11g                                                  11.2.0.1.0 ... Interim patches (5) : Patch  8888434      : applied on Sat Jan 08 00:27:33 CST 2011 ... {AIX-ASM-CF: LMHB TERMINATE INSTANCE WHEN OFFLINE ONE FAILGROUP IN ASM DG} Patch  8730312      : applied on Thu Jun 03 21:30:03 CST 2010 ... {FWD MERGE FOR BASE BUG 8715387 FOR 12G} Patch  9502717      : applied on Thu Jun 03 21:25:54 CST 2010 ... {LMS HIT ORA-600 [KJBLDRMNEXTPKEY:SEEN] AND CRASHED THE INSTANCE} { + same 2 as GI above} ?? cell server Cache Policy cell08# MegaCli64 -LDInfo -Lall -aALL | grep 'Current Cache Policy' Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU cell09# MegaCli64 -LDInfo -Lall -aALL | grep 'Current Cache Policy' Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU Cache policy is in WB Would recommend proactive  battery repalcement. Example : a. /opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp  -Cache -LALL -aALL ####( Will list the cache policy) b. /opt/MegaRAID/MegaCli/MegaCli64 -LDSetProp  -WB  -LALL -aALL ####( Will try to change teh policy from xx to WB)     So policy Change to WB will not come into effect immediately     Set Write Policy to WriteBack on Adapter 0, VD 0 (target id: 0) success     Battery capacity is below the threshold value ??cell BBU??????: cell08# /opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuStatus -a0 BBU status for Adapter: 0 BatteryType: iBBU Voltage: 4061 mV Current: 0 mA Temperature: 36 C BBU Firmware Status: Charging Status : None Voltage : OK Temperature : OK Learn Cycle Requested : No Learn Cycle Active : No Learn Cycle Status : OK Learn Cycle Timeout : No I2c Errors Detected : No Battery Pack Missing : No Battery Replacement required : No Remaining Capacity Low : Yes Periodic Learn Required : No Battery state: GasGuageStatus: Fully Discharged : No Fully Charged : Yes Discharging : Yes Initialized : Yes Remaining Time Alarm : No Remaining Capacity Alarm: No Discharge Terminated : No Over Temperature : No Charging Terminated : No Over Charged : No Relative State of Charge: 99 % Charger System State: 49168 Charger System Ctrl: 0 Charging current: 0 mA Absolute state of charge: 21 % Max Error: 2 % Exit Code: 0x00 ????BBU ??: dcli -g ~/cell_group -l root -t '{ uname -srm ; head -1 /etc/*release ; uptime | cut -d, -f1 ; imagehistory ; ipmitool sunoem cli "show /SP system_description system_identifier" | grep = ; ipmitool sunoem cli "show /SP/policy FLASH_ACCELERATOR_CARD_INSTALLED /opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuStatus -a0 | egrep -i 'BBU|Battery|Charge:|Fully|Low|Learn' ; }' | tee /tmp/ExaInfo.log Target cells: ['cellserv01', 'cellserv02', 'cellserv03', 'cellserv04', 'cellserv05', 'cellserv06', 'cellserv07'] cellserv01: Linux 2.6.18-128.1.16.0.1.el5 x86_64 cellserv01: ==> /etc/enterprise-release <== cellserv01: Enterprise Linux Enterprise Linux Server release 5.3 (Carthage) cellserv01: cellserv01: ==> /etc/redhat-release <== cellserv01: Enterprise Linux Enterprise Linux Server release 5.3 (Carthage) cellserv01: 01:17:39 up 635 days cellserv01: Version : 11.2.1.2.1 cellserv01: Image activation date : 2011-03-25 11:59:34 -0800 cellserv01: Imaging mode : fresh cellserv01: Imaging status : success cellserv01: cellserv01: Version : 11.2.1.2.3 cellserv01: Image activation date : 2011-04-13 12:15:46 +0800 cellserv01: Imaging mode : patch cellserv01: Imaging status : success cellserv01: cellserv01: Version : 11.2.1.2.6 cellserv01: Image activation date : 2011-05-27 23:08:22 +0800 cellserv01: Imaging mode : patch cellserv01: Imaging status : success cellserv01: cellserv01: system_description = SUN FIRE X4275 SERVER, ILOM v3.0.6.10.b, r52264 cellserv01: system_identifier = Sun Oracle Database Machine cellserv01: Connected. Use ^D to exit. cellserv01: -> show /SP/policy FLASH_ACCELERATOR_CARD_INSTALLED cellserv01: show: No matching properties found. cellserv01: cellserv01: -> Session closed cellserv01: Disconnected cellserv01: BBU status for Adapter: 0 cellserv01: BatteryType: iBBU cellserv01: BBU Firmware Status: cellserv01: Learn Cycle Requested : No cellserv01: Learn Cycle Active : No cellserv01: Learn Cycle Status : OK cellserv01: Learn Cycle Timeout : No cellserv01: Battery Pack Missing : No cellserv01: Battery Replacement required : No cellserv01: Remaining Capacity Low : Yes cellserv01: Periodic Learn Required : No cellserv01: Battery state: cellserv01: Fully Discharged : No cellserv01: Fully Charged : Yes cellserv01: Relative State of Charge: 99 % cellserv01: Absolute state of charge: 21 % dcli -l root -g /root/all_group '/opt/MegaRAID/MegAaCli/MegaCli64 -AdpBbuCmd -a0' > BBU.out check ipmi: dcli -g ~/cell_group -l root -t '{ > ipmitool sunoem cli "show /SP/policy FLASH_ACCELERATOR_CARD_INSTALLED" | grep = ; MegaCli64 -LDInfo -Lall -aALL | grep 'Current Cache Policy' ; }' | tee /tmp/ExaCells.log

    Read the article

  • ASP.NET Podcast Show #148 - ASP.NET WebForms to build a Mobile Web Application

    - by Wallym
    Check the podcast site for the original url. This is the video and source code for an ASP.NET WebForms app that I wrote that is optimized for the iPhone and mobile environments.  Subscribe to everything. Subscribe to WMV. Subscribe to M4V for iPhone/iPad. Subscribe to MP3. Download WMV. Download M4V for iPhone/iPad. Download MP3. Link to iWebKit. Source Code: <%@ Page Title="MapSplore" Language="C#" MasterPageFile="iPhoneMaster.master" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="AT_iPhone_Default" %> <asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server"></asp:Content><asp:Content ID="Content2" ContentPlaceHolderID="Content" Runat="Server" ClientIDMode="Static">    <asp:ScriptManager ID="sm" runat="server"         EnablePartialRendering="true" EnableHistory="false" EnableCdn="true" />    <script type="text/javascript" src="http://maps.google.com/maps/api/js?sensor=true"></script>    <script  language="javascript"  type="text/javascript">    <!--    Sys.WebForms.PageRequestManager.getInstance().add_endRequest(endRequestHandle);    function endRequestHandle(sender, Args) {        setupMapDiv();        setupPlaceIveBeen();    }    function setupPlaceIveBeen() {        var mapPlaceIveBeen = document.getElementById('divPlaceIveBeen');        if (mapPlaceIveBeen != null) {            var PlaceLat = document.getElementById('<%=hdPlaceIveBeenLatitude.ClientID %>').value;            var PlaceLon = document.getElementById('<%=hdPlaceIveBeenLongitude.ClientID %>').value;            var PlaceTitle = document.getElementById('<%=lblPlaceIveBeenName.ClientID %>').innerHTML;            var latlng = new google.maps.LatLng(PlaceLat, PlaceLon);            var myOptions = {                zoom: 14,                center: latlng,                mapTypeId: google.maps.MapTypeId.ROADMAP            };            var map = new google.maps.Map(mapPlaceIveBeen, myOptions);            var marker = new google.maps.Marker({                position: new google.maps.LatLng(PlaceLat, PlaceLon),                map: map,                title: PlaceTitle,                clickable: false            });        }    }    function setupMapDiv() {        var mapdiv = document.getElementById('divImHere');        if (mapdiv != null) {            var PlaceLat = document.getElementById('<%=hdPlaceLat.ClientID %>').value;            var PlaceLon = document.getElementById('<%=hdPlaceLon.ClientID %>').value;            var PlaceTitle = document.getElementById('<%=hdPlaceTitle.ClientID %>').value;            var latlng = new google.maps.LatLng(PlaceLat, PlaceLon);            var myOptions = {                zoom: 14,                center: latlng,                mapTypeId: google.maps.MapTypeId.ROADMAP            };            var map = new google.maps.Map(mapdiv, myOptions);            var marker = new google.maps.Marker({                position: new google.maps.LatLng(PlaceLat, PlaceLon),                map: map,                title: PlaceTitle,                clickable: false            });        }     }    -->    </script>    <asp:HiddenField ID="Latitude" runat="server" />    <asp:HiddenField ID="Longitude" runat="server" />    <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js%22%3E%3C/script>    <script language="javascript" type="text/javascript">        $(document).ready(function () {            GetLocation();            setupMapDiv();            setupPlaceIveBeen();        });        function GetLocation() {            if (navigator.geolocation != null) {                navigator.geolocation.getCurrentPosition(getData);            }            else {                var mess = document.getElementById('<%=Message.ClientID %>');                mess.innerHTML = "Sorry, your browser does not support geolocation. " +                    "Try the latest version of Safari on the iPhone, Android browser, or the latest version of FireFox.";            }        }        function UpdateLocation_Click() {            GetLocation();        }        function getData(position) {            var latitude = position.coords.latitude;            var longitude = position.coords.longitude;            var hdLat = document.getElementById('<%=Latitude.ClientID %>');            var hdLon = document.getElementById('<%=Longitude.ClientID %>');            hdLat.value = latitude;            hdLon.value = longitude;        }    </script>    <asp:Label ID="Message" runat="server" />    <asp:UpdatePanel ID="upl" runat="server">        <ContentTemplate>    <asp:Panel ID="pnlStart" runat="server" Visible="true">    <div id="topbar">        <div id="title">MapSplore</div>    </div>    <div id="content">        <ul class="pageitem">            <li class="menu">                <asp:LinkButton ID="lbLocalDeals" runat="server" onclick="lbLocalDeals_Click">                <asp:Image ID="imLocalDeals" runat="server" ImageUrl="~/Images/ArtFavor_Money_Bag_Icon.png" Height="30" />                <span class="name">Local Deals.</span>                <span class="arrow"></span>                </asp:LinkButton>                </li>            <li class="menu">                <asp:LinkButton ID="lbLocalPlaces" runat="server" onclick="lbLocalPlaces_Click">                <asp:Image ID="imLocalPlaces" runat="server" ImageUrl="~/Images/Andy_Houses_on_the_horizon_-_Starburst_remix.png" Height="30" />                <span class="name">Local Places.</span>                <span class="arrow"></span>                </asp:LinkButton>                </li>            <li class="menu">                <asp:LinkButton ID="lbWhereIveBeen" runat="server" onclick="lbWhereIveBeen_Click">                <asp:Image ID="imImHere" runat="server" ImageUrl="~/Images/ryanlerch_flagpole.png" Height="30" />                <span class="name">I've been here.</span>                <span class="arrow"></span>                </asp:LinkButton>                </li>            <li class="menu">                <asp:LinkButton ID="lbMyStats" runat="server">                <asp:Image ID="imMyStats" runat="server" ImageUrl="~/Images/Anonymous_Spreadsheet.png" Height="30" />                <span class="name">My Stats.</span>                <span class="arrow"></span>                </asp:LinkButton>                </li>            <li class="menu">                <asp:LinkButton ID="lbAddAPlace" runat="server" onclick="lbAddAPlace_Click">                <asp:Image ID="imAddAPlace" runat="server" ImageUrl="~/Images/jean_victor_balin_add.png" Height="30" />                <span class="name">Add a Place.</span>                <span class="arrow"></span>                </asp:LinkButton>                </li>            <li class="button">                <input type="button" value="Update Your Current Location" onclick="UpdateLocation_Click()">                </li>        </ul>    </div>    </asp:Panel>    <div>    <asp:Panel ID="pnlCoupons" runat="server" Visible="false">        <div id="topbar">        <div id="title">MapSplore</div>        <div id="leftbutton">            <asp:LinkButton runat="server" Text="Return"                 ID="ReturnFromDeals" OnClick="ReturnFromDeals_Click" /></div></div>    <div class="content">    <asp:ListView ID="lvCoupons" runat="server">        <LayoutTemplate>            <ul class="pageitem" runat="server">                <asp:PlaceHolder ID="itemPlaceholder" runat="server" />            </ul>        </LayoutTemplate>        <ItemTemplate>            <li class="menu">                <asp:LinkButton ID="lbBusiness" runat="server" Text='<%#Eval("Place.Name") %>' OnClick="lbBusiness_Click">                    <span class="comment">                    <asp:Label ID="lblAddress" runat="server" Text='<%#Eval("Place.Address1") %>' />                    <asp:Label ID="lblDis" runat="server" Text='<%# Convert.ToString(Convert.ToInt32(Eval("Place.Distance"))) + " meters" %>' CssClass="smallText" />                    <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' />                    <asp:HiddenField ID="hdGeoPromotionId" runat="server" Value='<%#Eval("GeoPromotionId") %>' />                    </span>                    <span class="arrow"></span>                </asp:LinkButton></li></ItemTemplate></asp:ListView><asp:GridView ID="gvCoupons" runat="server" AutoGenerateColumns="false">            <HeaderStyle BackColor="Silver" />            <AlternatingRowStyle BackColor="Wheat" />            <Columns>                <asp:TemplateField AccessibleHeaderText="Business" HeaderText="Business">                    <ItemTemplate>                        <asp:Image ID="imPlaceType" runat="server" Text='<%#Eval("Type") %>' ImageUrl='<%#Eval("Image") %>' />                        <asp:LinkButton ID="lbBusiness" runat="server" Text='<%#Eval("Name") %>' OnClick="lbBusiness_Click" />                        <asp:LinkButton ID="lblAddress" runat="server" Text='<%#Eval("Address1") %>' CssClass="smallText" />                        <asp:Label ID="lblDis" runat="server" Text='<%# Convert.ToString(Convert.ToInt32(Eval("Distance"))) + " meters" %>' CssClass="smallText" />                        <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' />                        <asp:HiddenField ID="hdGeoPromotionId" runat="server" Value='<%#Eval("GeoPromotionId") %>' />                        <asp:Label ID="lblInfo" runat="server" Visible="false" />                    </ItemTemplate>                </asp:TemplateField>            </Columns>        </asp:GridView>    </div>    </asp:Panel>    <asp:Panel ID="pnlPlaces" runat="server" Visible="false">    <div id="topbar">        <div id="title">            MapSplore</div><div id="leftbutton">            <asp:LinkButton runat="server" Text="Return"                 ID="ReturnFromPlaces" OnClick="ReturnFromPlaces_Click" /></div></div>        <div id="content">        <asp:ListView ID="lvPlaces" runat="server">            <LayoutTemplate>                <ul id="ulPlaces" class="pageitem" runat="server">                    <asp:PlaceHolder ID="itemPlaceholder" runat="server" />                    <li class="menu">                        <asp:LinkButton ID="lbNotListed" runat="server" CssClass="name"                            OnClick="lbNotListed_Click">                            Place not listed                            <span class="arrow"></span>                            </asp:LinkButton>                    </li>                </ul>            </LayoutTemplate>            <ItemTemplate>            <li class="menu">                <asp:LinkButton ID="lbImHere" runat="server" CssClass="name"                     OnClick="lbImHere_Click">                <%#DisplayName(Eval("Name")) %>&nbsp;                <%# Convert.ToString(Convert.ToInt32(Eval("Distance"))) + " meters" %>                <asp:HiddenField ID="hdPlaceId" runat="server" Value='<%#Eval("PlaceId") %>' />                <span class="arrow"></span>                </asp:LinkButton></li></ItemTemplate></asp:ListView>    </div>    </asp:Panel>    <asp:Panel ID="pnlImHereNow" runat="server" Visible="false">        <div id="topbar">        <div id="title">            MapSplore</div><div id="leftbutton">            <asp:LinkButton runat="server" Text="Places"                 ID="lbImHereNowReturn" OnClick="lbImHereNowReturn_Click" /></div></div>            <div id="rightbutton">            <asp:LinkButton runat="server" Text="Beginning"                ID="lbBackToBeginning" OnClick="lbBackToBeginning_Click" />            </div>        <div id="content">        <ul class="pageitem">        <asp:HiddenField ID="hdPlaceId" runat="server" />        <asp:HiddenField ID="hdPlaceLat" runat="server" />        <asp:HiddenField ID="hdPlaceLon" runat="server" />        <asp:HiddenField ID="hdPlaceTitle" runat="server" />        <asp:Button ID="btnImHereNow" runat="server"             Text="I'm here" OnClick="btnImHereNow_Click" />             <asp:Label ID="lblPlaceTitle" runat="server" /><br />        <asp:TextBox ID="txtWhatsHappening" runat="server" TextMode="MultiLine" Rows="2" style="width:300px" /><br />        <div id="divImHere" style="width:300px; height:300px"></div>        </div>        </ul>    </asp:Panel>    <asp:Panel runat="server" ID="pnlIveBeenHere" Visible="false">        <div id="topbar">        <div id="title">            Where I've been</div><div id="leftbutton">            <asp:LinkButton ID="lbIveBeenHereBack" runat="server" Text="Back" OnClick="lbIveBeenHereBack_Click" /></div></div>        <div id="content">        <asp:ListView ID="lvWhereIveBeen" runat="server">            <LayoutTemplate>                <ul id="ulWhereIveBeen" class="pageitem" runat="server">                    <asp:PlaceHolder ID="itemPlaceholder" runat="server" />                </ul>            </LayoutTemplate>            <ItemTemplate>            <li class="menu" runat="server">                <asp:LinkButton ID="lbPlaceIveBeen" runat="server" OnClick="lbPlaceIveBeen_Click" CssClass="name">                    <asp:Label ID="lblPlace" runat="server" Text='<%#Eval("PlaceName") %>' /> at                    <asp:Label ID="lblTime" runat="server" Text='<%#Eval("ATTime") %>' CssClass="content" />                    <asp:HiddenField ID="hdATID" runat="server" Value='<%#Eval("ATID") %>' />                    <span class="arrow"></span>                </asp:LinkButton>            </li>            </ItemTemplate>        </asp:ListView>        </div>        </asp:Panel>    <asp:Panel runat="server" ID="pnlPlaceIveBeen" Visible="false">        <div id="topbar">        <div id="title">            I've been here        </div>        <div id="leftbutton">            <asp:LinkButton ID="lbPlaceIveBeenBack" runat="server" Text="Back" OnClick="lbPlaceIveBeenBack_Click" />        </div>        <div id="rightbutton">            <asp:LinkButton ID="lbPlaceIveBeenBeginning" runat="server" Text="Beginning" OnClick="lbPlaceIveBeenBeginning_Click" />        </div>        </div>        <div id="content">            <ul class="pageitem">            <li>            <asp:HiddenField ID="hdPlaceIveBeenPlaceId" runat="server" />            <asp:HiddenField ID="hdPlaceIveBeenLatitude" runat="server" />            <asp:HiddenField ID="hdPlaceIveBeenLongitude" runat="server" />            <asp:Label ID="lblPlaceIveBeenName" runat="server" /><br />            <asp:Label ID="lblPlaceIveBeenAddress" runat="server" /><br />            <asp:Label ID="lblPlaceIveBeenCity" runat="server" />,             <asp:Label ID="lblPlaceIveBeenState" runat="server" />            <asp:Label ID="lblPlaceIveBeenZipCode" runat="server" /><br />            <asp:Label ID="lblPlaceIveBeenCountry" runat="server" /><br />            <div id="divPlaceIveBeen" style="width:300px; height:300px"></div>            </li>            </ul>        </div>                </asp:Panel>         <asp:Panel ID="pnlAddPlace" runat="server" Visible="false">                <div id="topbar"><div id="title">MapSplore</div><div id="leftbutton"><asp:LinkButton ID="lbAddPlaceReturn" runat="server" Text="Back" OnClick="lbAddPlaceReturn_Click" /></div><div id="rightnav"></div></div><div id="content">    <ul class="pageitem">        <li id="liPlaceAddMessage" runat="server" visible="false">        <asp:Label ID="PlaceAddMessage" runat="server" />        </li>        <li class="bigfield">        <asp:TextBox ID="txtPlaceName" runat="server" placeholder="Name of Establishment" />        </li>        <li class="bigfield">        <asp:TextBox ID="txtAddress1" runat="server" placeholder="Address 1" />        </li>        <li class="bigfield">        <asp:TextBox ID="txtCity" runat="server" placeholder="City" />        </li>        <li class="select">        <asp:DropDownList ID="ddlProvince" runat="server" placeholder="Select State" />          <span class="arrow"></span>              </li>        <li class="bigfield">        <asp:TextBox ID="txtZipCode" runat="server" placeholder="Zip Code" />        </li>        <li class="select">        <asp:DropDownList ID="ddlCountry" runat="server"             onselectedindexchanged="ddlCountry_SelectedIndexChanged" />        <span class="arrow"></span>        </li>        <li class="bigfield">        <asp:TextBox ID="txtPhoneNumber" runat="server" placeholder="Phone Number" />        </li>        <li class="checkbox">            <span class="name">You Here Now:</span> <asp:CheckBox ID="cbYouHereNow" runat="server" Checked="true" />        </li>        <li class="button">        <asp:Button ID="btnAdd" runat="server" Text="Add Place"             onclick="btnAdd_Click" />        </li>    </ul></div>        </asp:Panel>        <asp:Panel ID="pnlImHere" runat="server" Visible="false">            <asp:TextBox ID="txtImHere" runat="server"                 TextMode="MultiLine" Rows="3" Columns="40" /><br />            <asp:DropDownList ID="ddlPlace" runat="server" /><br />            <asp:Button ID="btnHere" runat="server" Text="Tell Everyone I'm Here"                 onclick="btnHere_Click" /><br />        </asp:Panel>     </div>    </ContentTemplate>    </asp:UpdatePanel> </asp:Content> Code Behind .cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls;using LocationDataModel; public partial class AT_iPhone_Default : ViewStatePage{    private iPhoneDevice ipd;     protected void Page_Load(object sender, EventArgs e)    {        LocationDataEntities lde = new LocationDataEntities();        if (!Page.IsPostBack)        {            var Countries = from c in lde.Countries select c;            foreach (Country co in Countries)            {                ddlCountry.Items.Add(new ListItem(co.Name, co.CountryId.ToString()));            }            ddlCountry_SelectedIndexChanged(ddlCountry, null);            if (AppleIPhone.IsIPad())                ipd = iPhoneDevice.iPad;            if (AppleIPhone.IsIPhone())                ipd = iPhoneDevice.iPhone;            if (AppleIPhone.IsIPodTouch())                ipd = iPhoneDevice.iPodTouch;        }    }    protected void btnPlaces_Click(object sender, EventArgs e)    {    }    protected void btnAdd_Click(object sender, EventArgs e)    {        bool blImHere = cbYouHereNow.Checked;        string Place = txtPlaceName.Text,            Address1 = txtAddress1.Text,            City = txtCity.Text,            ZipCode = txtZipCode.Text,            PhoneNumber = txtPhoneNumber.Text,            ProvinceId = ddlProvince.SelectedItem.Value,            CountryId = ddlCountry.SelectedItem.Value;        int iProvinceId, iCountryId;        double dLatitude, dLongitude;        DataAccess da = new DataAccess();        if ((!String.IsNullOrEmpty(ProvinceId)) &&            (!String.IsNullOrEmpty(CountryId)))        {            iProvinceId = Convert.ToInt32(ProvinceId);            iCountryId = Convert.ToInt32(CountryId);            if (blImHere)            {                dLatitude = Convert.ToDouble(Latitude.Value);                dLongitude = Convert.ToDouble(Longitude.Value);                da.StorePlace(Place, Address1, String.Empty, City,                    iProvinceId, ZipCode, iCountryId, PhoneNumber,                    dLatitude, dLongitude);            }            else            {                da.StorePlace(Place, Address1, String.Empty, City,                    iProvinceId, ZipCode, iCountryId, PhoneNumber);            }            liPlaceAddMessage.Visible = true;            PlaceAddMessage.Text = "Awesome, your place has been added. Add Another!";            txtPlaceName.Text = String.Empty;            txtAddress1.Text = String.Empty;            txtCity.Text = String.Empty;            ddlProvince.SelectedIndex = -1;            txtZipCode.Text = String.Empty;            txtPhoneNumber.Text = String.Empty;        }        else        {            liPlaceAddMessage.Visible = true;            PlaceAddMessage.Text = "Please select a State and a Country.";        }    }    protected void ddlCountry_SelectedIndexChanged(object sender, EventArgs e)    {        string CountryId = ddlCountry.SelectedItem.Value;        if (!String.IsNullOrEmpty(CountryId))        {            int iCountryId = Convert.ToInt32(CountryId);            LocationDataModel.LocationDataEntities lde = new LocationDataModel.LocationDataEntities();            var prov = from p in lde.Provinces where p.CountryId == iCountryId                        orderby p.ProvinceName select p;                        ddlProvince.Items.Add(String.Empty);            foreach (Province pr in prov)            {                ddlProvince.Items.Add(new ListItem(pr.ProvinceName, pr.ProvinceId.ToString()));            }        }        else        {            ddlProvince.Items.Clear();        }    }    protected void btnImHere_Click(object sender, EventArgs e)    {        int i = 0;        DataAccess da = new DataAccess();        double Lat = Convert.ToDouble(Latitude.Value),            Lon = Convert.ToDouble(Longitude.Value);        List<Place> lp = da.NearByLocations(Lat, Lon);        foreach (Place p in lp)        {            ListItem li = new ListItem(p.Name, p.PlaceId.ToString());            if (i == 0)            {                li.Selected = true;            }            ddlPlace.Items.Add(li);            i++;        }        pnlAddPlace.Visible = false;        pnlImHere.Visible = true;    }    protected void lbImHere_Click(object sender, EventArgs e)    {        string UserName = Membership.GetUser().UserName;        ListViewItem lvi = (ListViewItem)(((LinkButton)sender).Parent);        HiddenField hd = (HiddenField)lvi.FindControl("hdPlaceId");        long PlaceId = Convert.ToInt64(hd.Value);        double dLatitude = Convert.ToDouble(Latitude.Value);        double dLongitude = Convert.ToDouble(Longitude.Value);        DataAccess da = new DataAccess();        Place pl = da.GetPlace(PlaceId);        pnlImHereNow.Visible = true;        pnlPlaces.Visible = false;        hdPlaceId.Value = PlaceId.ToString();        hdPlaceLat.Value = pl.Latitude.ToString();        hdPlaceLon.Value = pl.Longitude.ToString();        hdPlaceTitle.Value = pl.Name;        lblPlaceTitle.Text = pl.Name;    }    protected void btnHere_Click(object sender, EventArgs e)    {        string UserName = Membership.GetUser().UserName;        string WhatsH = txtImHere.Text;        long PlaceId = Convert.ToInt64(ddlPlace.SelectedValue);        double dLatitude = Convert.ToDouble(Latitude.Value);        double dLongitude = Convert.ToDouble(Longitude.Value);        DataAccess da = new DataAccess();        da.StoreUserAT(UserName, PlaceId, WhatsH,            dLatitude, dLongitude);    }    protected void btnLocalCoupons_Click(object sender, EventArgs e)    {        double dLatitude = Convert.ToDouble(Latitude.Value);        double dLongitude = Convert.ToDouble(Longitude.Value);        DataAccess da = new DataAccess();     }    protected void lbBusiness_Click(object sender, EventArgs e)    {        string UserName = Membership.GetUser().UserName;        GridViewRow gvr = (GridViewRow)(((LinkButton)sender).Parent.Parent);        HiddenField hd = (HiddenField)gvr.FindControl("hdPlaceId");        string sPlaceId = hd.Value;        Int64 PlaceId;        if (!String.IsNullOrEmpty(sPlaceId))        {            PlaceId = Convert.ToInt64(sPlaceId);        }    }    protected void lbLocalDeals_Click(object sender, EventArgs e)    {        double dLatitude = Convert.ToDouble(Latitude.Value);        double dLongitude = Convert.ToDouble(Longitude.Value);        DataAccess da = new DataAccess();        pnlCoupons.Visible = true;        pnlStart.Visible = false;        List<GeoPromotion> lgp = da.NearByDeals(dLatitude, dLongitude);        lvCoupons.DataSource = lgp;        lvCoupons.DataBind();    }    protected void lbLocalPlaces_Click(object sender, EventArgs e)    {        DataAccess da = new DataAccess();        double Lat = Convert.ToDouble(Latitude.Value);        double Lon = Convert.ToDouble(Longitude.Value);        List<LocationDataModel.Place> places = da.NearByLocations(Lat, Lon);        lvPlaces.DataSource = places;        lvPlaces.SelectedIndex = -1;        lvPlaces.DataBind();        pnlPlaces.Visible = true;        pnlStart.Visible = false;    }    protected void ReturnFromPlaces_Click(object sender, EventArgs e)    {        pnlPlaces.Visible = false;        pnlStart.Visible = true;    }    protected void ReturnFromDeals_Click(object sender, EventArgs e)    {        pnlCoupons.Visible = false;        pnlStart.Visible = true;    }    protected void btnImHereNow_Click(object sender, EventArgs e)    {        long PlaceId = Convert.ToInt32(hdPlaceId.Value);        string UserName = Membership.GetUser().UserName;        string WhatsHappening = txtWhatsHappening.Text;        double UserLat = Convert.ToDouble(Latitude.Value);        double UserLon = Convert.ToDouble(Longitude.Value);        DataAccess da = new DataAccess();        da.StoreUserAT(UserName, PlaceId, WhatsHappening,             UserLat, UserLon);    }    protected void lbImHereNowReturn_Click(object sender, EventArgs e)    {        pnlImHereNow.Visible = false;        pnlPlaces.Visible = true;    }    protected void lbBackToBeginning_Click(object sender, EventArgs e)    {        pnlStart.Visible = true;        pnlImHereNow.Visible = false;    }    protected void lbWhereIveBeen_Click(object sender, EventArgs e)    {        string UserName = Membership.GetUser().UserName;        pnlStart.Visible = false;        pnlIveBeenHere.Visible = true;        DataAccess da = new DataAccess();        lvWhereIveBeen.DataSource = da.UserATs(UserName, 0, 15);        lvWhereIveBeen.DataBind();    }    protected void lbIveBeenHereBack_Click(object sender, EventArgs e)    {        pnlIveBeenHere.Visible = false;        pnlStart.Visible = true;    }     protected void lbPlaceIveBeen_Click(object sender, EventArgs e)    {        LinkButton lb = (LinkButton)sender;        ListViewItem lvi = (ListViewItem)lb.Parent.Parent;        HiddenField hdATID = (HiddenField)lvi.FindControl("hdATID");        Int64 ATID = Convert.ToInt64(hdATID.Value);        DataAccess da = new DataAccess();        pnlIveBeenHere.Visible = false;        pnlPlaceIveBeen.Visible = true;        var plac = da.GetPlaceViaATID(ATID);        hdPlaceIveBeenPlaceId.Value = plac.PlaceId.ToString();        hdPlaceIveBeenLatitude.Value = plac.Latitude.ToString();        hdPlaceIveBeenLongitude.Value = plac.Longitude.ToString();        lblPlaceIveBeenName.Text = plac.Name;        lblPlaceIveBeenAddress.Text = plac.Address1;        lblPlaceIveBeenCity.Text = plac.City;        lblPlaceIveBeenState.Text = plac.Province.ProvinceName;        lblPlaceIveBeenZipCode.Text = plac.ZipCode;        lblPlaceIveBeenCountry.Text = plac.Country.Name;    }     protected void lbNotListed_Click(object sender, EventArgs e)    {        SetupAddPoint();        pnlPlaces.Visible = false;    }     protected void lbAddAPlace_Click(object sender, EventArgs e)    {        SetupAddPoint();    }     private void SetupAddPoint()    {        double lat = Convert.ToDouble(Latitude.Value);        double lon = Convert.ToDouble(Longitude.Value);        DataAccess da = new DataAccess();        var zip = da.WhereAmIAt(lat, lon);        if (zip.Count > 0)        {            var z0 = zip[0];            txtCity.Text = z0.City;            txtZipCode.Text = z0.ZipCode;            ddlProvince.ClearSelection();            if (z0.ProvinceId.HasValue == true)            {                foreach (ListItem li in ddlProvince.Items)                {                    if (li.Value == z0.ProvinceId.Value.ToString())                    {                        li.Selected = true;                        break;                    }                }            }        }        pnlAddPlace.Visible = true;        pnlStart.Visible = false;    }    protected void lbAddPlaceReturn_Click(object sender, EventArgs e)    {        pnlAddPlace.Visible = false;        pnlStart.Visible = true;        liPlaceAddMessage.Visible = false;        PlaceAddMessage.Text = String.Empty;    }    protected void lbPlaceIveBeenBack_Click(object sender, EventArgs e)    {        pnlIveBeenHere.Visible = true;        pnlPlaceIveBeen.Visible = false;            }    protected void lbPlaceIveBeenBeginning_Click(object sender, EventArgs e)    {        pnlPlaceIveBeen.Visible = false;        pnlStart.Visible = true;    }    protected string DisplayName(object val)    {        string strVal = Convert.ToString(val);         if (AppleIPhone.IsIPad())        {            ipd = iPhoneDevice.iPad;        }        if (AppleIPhone.IsIPhone())        {            ipd = iPhoneDevice.iPhone;        }        if (AppleIPhone.IsIPodTouch())        {            ipd = iPhoneDevice.iPodTouch;        }        return (iPhoneHelper.DisplayContentOnMenu(strVal, ipd));    }} iPhoneHelper.cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web; public enum iPhoneDevice{    iPhone, iPodTouch, iPad}/// <summary>/// Summary description for iPhoneHelper/// </summary>/// public class iPhoneHelper{ public iPhoneHelper() {  //  // TODO: Add constructor logic here  // } // This code is stupid in retrospect. Use css to solve this problem      public static string DisplayContentOnMenu(string val, iPhoneDevice ipd)    {        string Return = val;        string Elipsis = "...";        int iPadMaxLength = 30;        int iPhoneMaxLength = 15;        if (ipd == iPhoneDevice.iPad)        {            if (Return.Length > iPadMaxLength)            {                Return = Return.Substring(0, iPadMaxLength - Elipsis.Length) + Elipsis;            }        }        else        {            if (Return.Length > iPhoneMaxLength)            {                Return = Return.Substring(0, iPhoneMaxLength - Elipsis.Length) + Elipsis;            }        }        return (Return);    }}  Source code for the ViewStatePage: using System;using System.Data;using System.Data.SqlClient;using System.Configuration;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Web.UI.HtmlControls; /// <summary>/// Summary description for BasePage/// </summary>#region Base class for a page.public class ViewStatePage : System.Web.UI.Page{     PageStatePersisterToDatabase myPageStatePersister;        public ViewStatePage()        : base()    {        myPageStatePersister = new PageStatePersisterToDatabase(this);    }     protected override PageStatePersister PageStatePersister    {        get        {            return myPageStatePersister;        }    } }#endregion #region This class will override the page persistence to store page state in a database.public class PageStatePersisterToDatabase : PageStatePersister{    private string ViewStateKeyField = "__VIEWSTATE_KEY";    private string _exNoConnectionStringFound = "No Database Configuration information is in the web.config.";     public PageStatePersisterToDatabase(Page page)        : base(page)    {    }     public override void Load()    {         // Get the cache key from the web form data        System.Int64 key = Convert.ToInt64(Page.Request.Params[ViewStateKeyField]);         Pair state = this.LoadState(key);         // Abort if cache object is not of type Pair        if (state == null)            throw new ApplicationException("Missing valid " + ViewStateKeyField);         // Set view state and control state        ViewState = state.First;        ControlState = state.Second;    }     public override void Save()    {         // No processing needed if no states available        if (ViewState == null && ControlState != null)            return;         System.Int64 key;        IStateFormatter formatter = this.StateFormatter;        Pair statePair = new Pair(ViewState, ControlState);         // Serialize the statePair object to a string.        string serializedState = formatter.Serialize(statePair);         // Save the ViewState and get a unique identifier back.        key = SaveState(serializedState);         // Register hidden field to store cache key in        // Page.ClientScript does not work properly with Atlas.        //Page.ClientScript.RegisterHiddenField(ViewStateKeyField, key.ToString());        ScriptManager.RegisterHiddenField(this.Page, ViewStateKeyField, key.ToString());    }     private System.Int64 SaveState(string PageState)    {        System.Int64 i64Key = 0;        string strConn = String.Empty,            strProvider = String.Empty;         string strSql = "insert into tblPageState ( SerializedState ) values ( '" + SqlEscape(PageState) + "');select scope_identity();";        SqlConnection sqlCn;        SqlCommand sqlCm;        try        {            GetDBConnectionString(ref strConn, ref strProvider);            sqlCn = new SqlConnection(strConn);            sqlCm = new SqlCommand(strSql, sqlCn);            sqlCn.Open();            i64Key = Convert.ToInt64(sqlCm.ExecuteScalar());            if (sqlCn.State != ConnectionState.Closed)            {                sqlCn.Close();            }            sqlCn.Dispose();            sqlCm.Dispose();        }        finally        {            sqlCn = null;            sqlCm = null;        }        return i64Key;    }     private Pair LoadState(System.Int64 iKey)    {        string strConn = String.Empty,            strProvider = String.Empty,            SerializedState = String.Empty,            strMinutesInPast = GetMinutesInPastToDelete();        Pair PageState;        string strSql = "select SerializedState from tblPageState where tblPageStateID=" + iKey.ToString() + ";" +            "delete from tblPageState where DateUpdated<DateAdd(mi, " + strMinutesInPast + ", getdate());";        SqlConnection sqlCn;        SqlCommand sqlCm;        try        {            GetDBConnectionString(ref strConn, ref strProvider);            sqlCn = new SqlConnection(strConn);            sqlCm = new SqlCommand(strSql, sqlCn);             sqlCn.Open();            SerializedState = Convert.ToString(sqlCm.ExecuteScalar());            IStateFormatter formatter = this.StateFormatter;             if ((null == SerializedState) ||                (String.Empty == SerializedState))            {                throw (new ApplicationException("No ViewState records were returned."));            }             // Deserilize returns the Pair object that is serialized in            // the Save method.            PageState = (Pair)formatter.Deserialize(SerializedState);             if (sqlCn.State != ConnectionState.Closed)            {                sqlCn.Close();            }            sqlCn.Dispose();            sqlCm.Dispose();        }        finally        {            sqlCn = null;            sqlCm = null;        }        return PageState;    }     private string SqlEscape(string Val)    {        string ReturnVal = String.Empty;        if (null != Val)        {            ReturnVal = Val.Replace("'", "''");        }        return (ReturnVal);    }    private void GetDBConnectionString(ref string ConnectionStringValue, ref string ProviderNameValue)    {        if (System.Configuration.ConfigurationManager.ConnectionStrings.Count > 0)        {            ConnectionStringValue = System.Configuration.ConfigurationManager.ConnectionStrings["ApplicationServices"].ConnectionString;            ProviderNameValue = System.Configuration.ConfigurationManager.ConnectionStrings["ApplicationServices"].ProviderName;        }        else        {            throw new ConfigurationErrorsException(_exNoConnectionStringFound);        }    }    private string GetMinutesInPastToDelete()    {        string strReturn = "-60";        if (null != System.Configuration.ConfigurationManager.AppSettings["MinutesInPastToDeletePageState"])        {            strReturn = System.Configuration.ConfigurationManager.AppSettings["MinutesInPastToDeletePageState"].ToString();        }        return (strReturn);    }}#endregion AppleiPhone.cs file: using System;using System.Collections.Generic;using System.Linq;using System.Web; /// <summary>/// Summary description for AppleIPhone/// </summary>public class AppleIPhone{ public AppleIPhone() {  //  // TODO: Add constructor logic here  // }     static public bool IsIPhoneOS()    {        return (IsIPad() || IsIPhone() || IsIPodTouch());    }     static public bool IsIPhone()    {        return IsTest("iPhone");    }     static public bool IsIPodTouch()    {        return IsTest("iPod");    }     static public bool IsIPad()    {        return IsTest("iPad");    }     static private bool IsTest(string Agent)    {        bool bl = false;        string ua = HttpContext.Current.Request.UserAgent.ToLower();        try        {            bl = ua.Contains(Agent.ToLower());        }        catch { }        return (bl);        }} Master page .cs: using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls; public partial class MasterPages_iPhoneMaster : System.Web.UI.MasterPage{    protected void Page_Load(object sender, EventArgs e)    {            HtmlHead head = Page.Header;            HtmlMeta meta = new HtmlMeta();            if (AppleIPhone.IsIPad() == true)            {                meta.Content = "width=400,user-scalable=no";                head.Controls.Add(meta);             }            else            {                meta.Content = "width=device-width, user-scalable=no";                meta.Attributes.Add("name", "viewport");            }            meta.Attributes.Add("name", "viewport");            head.Controls.Add(meta);            HtmlLink cssLink = new HtmlLink();            HtmlGenericControl script = new HtmlGenericControl("script");            script.Attributes.Add("type", "text/javascript");            script.Attributes.Add("src", ResolveUrl("~/Scripts/iWebKit/javascript/functions.js"));            head.Controls.Add(script);            cssLink.Attributes.Add("rel", "stylesheet");            cssLink.Attributes.Add("href", ResolveUrl("~/Scripts/iWebKit/css/style.css") );            cssLink.Attributes.Add("type", "text/css");            head.Controls.Add(cssLink);            HtmlGenericControl jsLink = new HtmlGenericControl("script");            //jsLink.Attributes.Add("type", "text/javascript");            //jsLink.Attributes.Add("src", ResolveUrl("~/Scripts/jquery-1.4.1.min.js") );            //head.Controls.Add(jsLink);            HtmlLink appleIcon = new HtmlLink();            appleIcon.Attributes.Add("rel", "apple-touch-icon");            appleIcon.Attributes.Add("href", ResolveUrl("~/apple-touch-icon.png"));            HtmlMeta appleMobileWebAppStatusBarStyle = new HtmlMeta();            appleMobileWebAppStatusBarStyle.Attributes.Add("name", "apple-mobile-web-app-status-bar-style");            appleMobileWebAppStatusBarStyle.Attributes.Add("content", "black");            head.Controls.Add(appleMobileWebAppStatusBarStyle);    }     internal string FindPath(string Location)    {        string Url = Server.MapPath(Location);        return (Url);    }}

    Read the article

  • Unable to setup postgres on ubuntu (8.4 on 9.10)

    - by shabda
    I am trying to setup postgres on ubuntu, and I cant proceed as I cant find the location of pg_hba.conf (Postgres 8.4 on ubuntu 9.10) What I did setup postgres via aptitude This gave me ... /usr/share/postgresql/8.4# aptitude install postgresql Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done The following NEW packages will be installed: libreadline5{a} postgresql postgresql-8.4{a} postgresql-client-8.4{a} postgresql-client-common{a} postgresql-common{a} 0 packages upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/5,159kB of archives. After unpacking 18.8MB will be used. Do you want to continue? [Y/n/?] Y Writing extended state information... Done Preconfiguring packages ... Selecting previously deselected package libreadline5. (Reading database ... 17490 files and directories currently installed.) Unpacking libreadline5 (from .../libreadline5_5.2-6_amd64.deb) ... Selecting previously deselected package postgresql-client-common. Unpacking postgresql-client-common (from .../postgresql-client-common_101_all.deb) ... Selecting previously deselected package postgresql-client-8.4. Unpacking postgresql-client-8.4 (from .../postgresql-client-8.4_8.4.1-1_amd64.deb) ... Selecting previously deselected package postgresql-common. Unpacking postgresql-common (from .../postgresql-common_101_all.deb) ... Selecting previously deselected package postgresql-8.4. Unpacking postgresql-8.4 (from .../postgresql-8.4_8.4.1-1_amd64.deb) ... Selecting previously deselected package postgresql. Unpacking postgresql (from .../postgresql_8.4.1-1_all.deb) ... Processing triggers for man-db ... Setting up libreadline5 (5.2-6) ... Setting up postgresql-client-common (101) ... Setting up postgresql-client-8.4 (8.4.1-1) ... update-alternatives: using /usr/share/postgresql/8.4/man/man1/psql.1.gz to provide /usr/share/man/man1/psql.1.gz (psql.1.gz) in auto mode. Setting up postgresql-common (101) ... Setting up postgresql-8.4 (8.4.1-1) ... update-alternatives: using /usr/share/postgresql/8.4/man/man1/postmaster.1.gz to provide /usr/share/man/man1/postmaster.1.gz (postmaster.1.gz) in auto mode. Setting up postgresql (8.4.1-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Writing extended state information... Done tried to login as su - postgres Followed by createdb mytestdb This failed with could not connect to database postgres: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? So I though I need to enable local connections in pg_hba.conf, which I cant find. So I created a new file as sudo vim /etc/postgresql/8.4/main/pg_hba.conf With values local all all ident But I still cant login after restarting the service. What are next steps for me to take.

    Read the article

  • Can someone help me install MYSQL server pelase? This is bugging me....

    - by Alex
    $ sudo aptitude install mysql-server Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done The following NEW packages will be installed: libhtml-template-perl{a} mysql-server mysql-server-5.0{a} mysql-server-core-5.0{a} 0 packages upgraded, 4 newly installed, 0 to remove and 12 not upgraded. Need to get 0B/27.7MB of archives. After unpacking 91.1MB will be used. Do you want to continue? [Y/n/?] y Writing extended state information... Done Preconfiguring packages ... Selecting previously deselected package mysql-server-core-5.0. (Reading database ... 17022 files and directories currently installed.) Unpacking mysql-server-core-5.0 (from .../mysql-server-core-5.0_5.1.30really5.0.75-0ubuntu10.3_amd64.deb) ... Selecting previously deselected package mysql-server-5.0. Unpacking mysql-server-5.0 (from .../mysql-server-5.0_5.1.30really5.0.75-0ubuntu10.3_amd64.deb) ... Selecting previously deselected package libhtml-template-perl. Unpacking libhtml-template-perl (from .../libhtml-template-perl_2.9-1_all.deb) ... Selecting previously deselected package mysql-server. Unpacking mysql-server (from .../mysql-server_5.1.30really5.0.75-0ubuntu10.3_all.deb) ... Setting up mysql-server-core-5.0 (5.1.30really5.0.75-0ubuntu10.3) ... Setting up mysql-server-5.0 (5.1.30really5.0.75-0ubuntu10.3) ... * Stopping MySQL database server mysqld [ OK ] /var/lib/dpkg/info/mysql-server-5.0.postinst: line 144: /etc/mysql/conf.d/old_passwords.cnf: No such file or directory dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 Setting up libhtml-template-perl (2.9-1) ... dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: mysql-server-5.0 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up mysql-server-5.0 (5.1.30really5.0.75-0ubuntu10.3) ... * Stopping MySQL database server mysqld [ OK ] /var/lib/dpkg/info/mysql-server-5.0.postinst: line 144: /etc/mysql/conf.d/old_passwords.cnf: No such file or directory dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.0 mysql-server Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Writing extended state information... Done Before I installed it, I ran this: sudo aptitude purge mysql-server mysql-server-5.0 This has happened before. I remember before, I did something with dpkg with fixed it.

    Read the article

  • wireless internet in linux is very very slow... but in windows.... everythnings fine

    - by Cody Acer
    yesterday when i was connecting to our neighbors wifi connection which is the signal strength is below 50%, i cant browse anything... even ping to gateway. 100% packet loss, and sometimes.. i can connect awesomely i can open my facebook account for 15 minutes but after 15min.. connection is extremely slow. but not windows i can surf even the signal str is very poor weird ey??.. root@Emely:~# lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge [8086:a010] Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller [0380]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a012] Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel modules: i2c-i801 05:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01) Subsystem: Wistron NeWeb Corp. Device [185f:051a] Kernel driver in use: bcma-pci-bridge Kernel modules: bcma 09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] Subsystem: Samsung Electronics Co Ltd Notebook N150P [144d:c072] Kernel driver in use: sky2 Kernel modules: sky2 root@Emely:~# ip addr show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether e8:11:32:2e:a6:fd brd ff:ff:ff:ff:ff:ff 3: wlan0: mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:1b:b1:a9:ac:e0 brd ff:ff:ff:ff:ff:ff inet 192.168.1.108/24 brd 192.168.1.255 scope global wlan0 inet6 fe80::21b:b1ff:fea9:ace0/64 scope link valid_lft forever preferred_lft forever root@Emely:~# ip link show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether e8:11:32:2e:a6:fd brd ff:ff:ff:ff:ff:ff 3: wlan0: mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:1b:b1:a9:ac:e0 brd ff:ff:ff:ff:ff:ff root@Emely:~# rfkill list all 0: samsung-wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: samsung-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no 3: phy0: Wireless LAN Soft blocked: no Hard blocked: no is this a wireless driver issue?

    Read the article

  • How to troubleshoot problem with OpenVpn Appliance Server not able to connect

    - by Peter
    1) I have a Windows Server 2008 Standard SP2 2) I am running Hyper-V and have the OpenSvn Appliance Server virtual running 3) I have configured it as it said, only issue was that the legacy network adapter does not have a setting the instructions mention "Enable spoofing of MAC Addresses". My understand is that before R2, this was on by default. 4) Server is running, web interfaces look good 5) I am trying to connect from a Vista 64 box and cannot 5a) If I set to UPD I am stuck at Authorizing and client log looks like: 10/11/09 15:00:42: INFO: OvpnConfig: connect... 10/11/09 15:00:42: INFO: Gui listen socket at 34567 10/11/09 15:00:42: INFO: sending start command to instantiator... 10/11/09 15:00:42: INFO: start 34567 ?C:\Users\Peter\AppData\Roaming\OpenVPNTech\config?02369512D0C82A04B88093022DA0226202218022A902264022AE022B? 10/11/09 15:00:42: INFO: Got line from MI->>INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 5b) I setup server for tcp and try to connect, I get a loop of authorizing and reconnecting. Log looks like: 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 10/11/09 15:00:54: INFO: Got line from MI->>BYTECOUNT:2560,3888 ... Is there anyway to turn on robust logging on the server to understand what is happening? Any ideas on how to hunt this down?

    Read the article

  • Degraded RAID5 and no md superblock on one of remaining drive

    - by ark1214
    This is actually on a QNAP TS-509 NAS. The RAID is basically a Linux RAID. The NAS was configured with RAID 5 with 5 drives (/md0 with /dev/sd[abcde]3). At some point, /dev/sde failed and drive was replaced. While rebuilding (and not completed), the NAS rebooted itself and /dev/sdc dropped out of the array. Now the array can't start because essentially 2 drives have dropped out. I disconnected /dev/sde and hoped that /md0 can resume in degraded mode, but no luck.. Further investigation shows that /dev/sdc3 has no md superblock. The data should be good since the array was unable to assemble after /dev/sdc dropped off. All the searches I done showed how to reassemble the array assuming 1 bad drive. But I think I just need to restore the superblock on /dev/sdc3 and that should bring the array up to a degraded mode which will allow me to backup data and then proceed with rebuilding with adding /dev/sde. Any help would be greatly appreciated. mdstat does not show /dev/md0 # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md5 : active raid1 sdd2[2](S) sdc2[3](S) sdb2[1] sda2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdd4[3] sdc4[2] sdb4[1] sda4[0] 458880 blocks [5/4] [UUUU_] bitmap: 40/57 pages [160KB], 4KB chunk md9 : active raid1 sdd1[3] sdc1[2] sdb1[1] sda1[0] 530048 blocks [5/4] [UUUU_] bitmap: 33/65 pages [132KB], 4KB chunk mdadm show /dev/md0 is still there # mdadm --examine --scan ARRAY /dev/md9 level=raid1 num-devices=5 UUID=271bf0f7:faf1f2c2:967631a4:3c0fa888 ARRAY /dev/md5 level=raid1 num-devices=2 UUID=0d75de26:0759d153:5524b8ea:86a3ee0d spares=2 ARRAY /dev/md0 level=raid5 num-devices=5 UUID=ce3e369b:4ff9ddd2:3639798a:e3889841 ARRAY /dev/md13 level=raid1 num-devices=5 UUID=7384c159:ea48a152:a1cdc8f2:c8d79a9c With /dev/sde removed, here is the mdadm examine output showing sdc3 has no md superblock # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff0e - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 0 8 3 0 active sync /dev/sda3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdb3 /dev/sdb3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff20 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 1 8 19 1 active sync /dev/sdb3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdc3 mdadm: No md superblock detected on /dev/sdc3. [~] # mdadm --examine /dev/sdd3 /dev/sdd3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff44 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 3 8 51 3 active sync /dev/sdd3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed fdisk output shows /dev/sdc3 partition is still there. [~] # fdisk -l Disk /dev/sdx: 128 MB, 128057344 bytes 8 heads, 32 sectors/track, 977 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/sdx1 1 8 1008 83 Linux /dev/sdx2 9 440 55296 83 Linux /dev/sdx3 441 872 55296 83 Linux /dev/sdx4 873 977 13440 5 Extended /dev/sdx5 873 913 5232 83 Linux /dev/sdx6 914 977 8176 83 Linux Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 66 530113+ 83 Linux /dev/sda2 67 132 530145 82 Linux swap / Solaris /dev/sda3 133 182338 1463569695 83 Linux /dev/sda4 182339 182400 498015 83 Linux Disk /dev/sda4: 469 MB, 469893120 bytes 2 heads, 4 sectors/track, 114720 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/sda4 doesn't contain a valid partition table Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 66 530113+ 83 Linux /dev/sdb2 67 132 530145 82 Linux swap / Solaris /dev/sdb3 133 182338 1463569695 83 Linux /dev/sdb4 182339 182400 498015 83 Linux Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 66 530125 83 Linux /dev/sdc2 67 132 530142 83 Linux /dev/sdc3 133 182338 1463569693 83 Linux /dev/sdc4 182339 182400 498012 83 Linux Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 66 530125 83 Linux /dev/sdd2 67 132 530142 83 Linux /dev/sdd3 133 243138 1951945693 83 Linux /dev/sdd4 243139 243200 498012 83 Linux Disk /dev/md9: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md9 doesn't contain a valid partition table Disk /dev/md5: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md5 doesn't contain a valid partition table

    Read the article

  • hostapd running on Ubuntu Server 13.04 only allows single station to connect when using wpa

    - by user450688
    Problem Only a single station can connect to hostapd at a time. Any single station can connect (W8, OSX, iOS, Nexus) but when two or more hosts are connected at the same time the first client loses its connectivity. However there are no connectivity issues when WPA is not used. Setup Linux (Ubuntu server 13.04) wireless router (with separate networks for wired WAN, wired LAN, and Wireless LAN. iptables-save output: *nat :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.0.0/24 -o p4p1 -j MASQUERADE -A POSTROUTING -s 10.0.1.0/24 -o p4p1 -j MASQUERADE COMMIT *mangle :PREROUTING ACCEPT [13:916] :INPUT ACCEPT [9:708] :FORWARD ACCEPT [4:208] :OUTPUT ACCEPT [9:3492] :POSTROUTING ACCEPT [13:3700] COMMIT *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT ACCEPT [9:3492] -A INPUT -i p4p1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i p4p1 -p tcp -m tcp --dport 22 -m state --state NEW -j ACCEPT -A INPUT -i eth0 -j ACCEPT -A INPUT -i wlan0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A FORWARD -i p4p1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -i eth0 -j ACCEPT -A FORWARD -i wlan0 -j ACCEPT -A FORWARD -i lo -j ACCEPT COMMIT /etc/hostapd/hostapd.conf #Wireless Interface interface=wlan0 driver=nl80211 ssid=<removed> hw_mode=g channel=6 max_num_sta=15 auth_algs=3 ieee80211n=1 wmm_enabled=1 wme_enabled=1 #Configure Hardware Capabilities of Interface ht_capab=[HT40+][SMPS-STATIC][GF][SHORT-GI-20][SHORT-GI-40][RX-STBC12] #Accept all MAC address macaddr_acl=0 #Shared Key Authentication wpa=1 wpa_passphrase=<removed> wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP rsn_pairwise=CCMP ###IPad Connectivevity Repair ieee8021x=0 eap_server=0 Wireless Card #lshw output product: RT2790 Wireless 802.11n 1T/2R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:03:00.0 logical name: mon.wlan0 version: 00 serial: <removed> width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=rt2800pci driverversion=3.8.0-25-generic firmware=0.34 ip=10.0.1.254 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn #iw list output Band 1: Capabilities: 0x272 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 2-streams Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-15, 32 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (27.0 dBm) * 2417 MHz [2] (27.0 dBm) * 2422 MHz [3] (27.0 dBm) * 2427 MHz [4] (27.0 dBm) * 2432 MHz [5] (27.0 dBm) * 2437 MHz [6] (27.0 dBm) * 2442 MHz [7] (27.0 dBm) * 2447 MHz [8] (27.0 dBm) * 2452 MHz [9] (27.0 dBm) * 2457 MHz [10] (27.0 dBm) * 2462 MHz [11] (27.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) Available Antennas: TX 0 RX 0 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ AP } <= 8, total <= 8, #channels <= 1 Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * set_tx_bitrate_mask * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (84) * Unknown command (87) * Unknown command (85) * Unknown command (89) * Unknown command (92) * testmode * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * Unknown mode (10): 0x40 0xd0 Device supports RSN-IBSS. HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS.

    Read the article

  • How to troubleshoot problem with OpenVPN Appliance Server not able to connect

    - by Peter
    1) I have a Windows Server 2008 Standard SP2 2) I am running Hyper-V and have the OpenVPN Appliance Server virtual running 3) I have configured it as it said, only issue was that the legacy network adapter does not have a setting the instructions mention "Enable spoofing of MAC Addresses". My understand is that before R2, this was on by default. 4) Server is running, web interfaces look good 5) I am trying to connect from a Vista 64 box and cannot 5a) If I set to UPD I am stuck at Authorizing and client log looks like: 10/11/09 15:00:42: INFO: OvpnConfig: connect... 10/11/09 15:00:42: INFO: Gui listen socket at 34567 10/11/09 15:00:42: INFO: sending start command to instantiator... 10/11/09 15:00:42: INFO: start 34567 ?C:\Users\Peter\AppData\Roaming\OpenVPNTech\config?02369512D0C82A04B88093022DA0226202218022A902264022AE022B? 10/11/09 15:00:42: INFO: Got line from MI->>INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 5b) I setup server for tcp and try to connect, I get a loop of authorizing and reconnecting. Log looks like: 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 10/11/09 15:00:54: INFO: Got line from MI->>BYTECOUNT:2560,3888 ... Is there anyway to turn on robust logging on the server to understand what is happening? Any ideas on how to hunt this down?

    Read the article

  • How to export SQL Server data from corrupted database (with disk write error)

    - by damitamit
    IT realised there was a disk write error on our production SQL Server 2005 and hence was causing the backups to fail. By the time they had realised this the nightly backup was old, so were not able to just restore the backup on another server. The database is still running and being used constantly. However DBCC CheckDB fails. Also the SQL Server backup task fails, Copy Database fails, Export Data Wizard fails. However it seems all the data can be read from the tables (i.e using bcp etc) Another observation I have made is that the Transaction Log is nearly double the size of the Database. (Does that mean all the changes arent being written to the MDF?) What would be the best plan of attack to get the database to a state where backups are working and the data is safe? Take the database offline and use the MDF/LDF to somehow create the database on another sql server? Export the data from the database using bcp. Create the database (use the Generate Scripts function on the corrupt db to create the schema on the new db) on another sql server and use bcp again to import the data. Some other option that is the right course of action in this situation? The IT manager says the data is safe as if the server fails, the data can be restored from the mdf/ldf. I'm not sure so insisted that we start exporting the data each night as a failsafe (using bcp for example). IT are also having issues on the hardware side of things as supposedly the disk error in on a virtualized disk and can't be rebuilt like a normal raid array (or something like that). Please excuse my use of incorrect terminology and incorrect assumptions on how Sql Server operates. I'm the application developer and have been called to help (as it seems IT know less about SQL Server than I do). Many Thanks, Amit Results of DBBC CheckDB: Msg 1823, Level 16, State 2, Line 1 A database snapshot cannot be created because it failed to start. Msg 7928, Level 16, State 1, Line 1 The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not support sparse files or alternate streams. Attempting to get exclusive access to run checks offline. Msg 5030, Level 16, State 12, Line 1 The database could not be exclusively locked to perform the operation. Msg 7926, Level 16, State 1, Line 1 Check statement aborted. The database could not be checked as a database snapshot could not be created and the database or table could not be locked. See Books Online for details of when this behavior is expected and what workarounds exist. Also see previous errors for more details. Msg 823, Level 24, State 3, Line 1 The operating system returned error 1(error not found) to SQL Server during a write at offset 0x00000674706000 in file 'G:\AX40_Dynamics_Live.mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.

    Read the article

  • Working with Silverlight DataGrid RowDetailsTemplate

    - by mohanbrij
    In this post I am going to show how we can use the Silverlight DataGrid RowDetails Template, Before I start I assume that you know basics of Silverlight and also know how you create a Silverlight Projects. I have started with the Silverlight Application, and kept all the default options before I created a Silverlight Project. After this I added a Silverlight DataGrid control to my MainForm.xaml page, using the DragDrop feature of Visual Studio IDE, this will help me to add the default namespace and references automatically. Just to give you a quick look of what exactly I am going to do, I will show you in the screen below my final target, before I start explaining rest of my codes. Before I start with the real code, first I have to do some ground work, as I am not getting the data from the DB, so I am creating a class where I will populate the dummy data. EmployeeData.cs public class EmployeeData { public string FirstName { get; set; } public string LastName { get; set; } public string Address { get; set; } public string City { get; set; } public string State { get; set; } public string Country { get; set; } public EmployeeData() { } public List<EmployeeData> GetEmployeeData() { List<EmployeeData> employees = new List<EmployeeData>(); employees.Add ( new EmployeeData { Address = "#407, PH1, Foyer Appartment", City = "Bangalore", Country = "India", FirstName = "Brij", LastName = "Mohan", State = "Karnataka" }); employees.Add ( new EmployeeData { Address = "#332, Dayal Niketan", City = "Jamshedpur", Country = "India", FirstName = "Arun", LastName = "Dayal", State = "Jharkhand" }); employees.Add ( new EmployeeData { Address = "#77, MSR Nagar", City = "Bangalore", Country = "India", FirstName = "Sunita", LastName = "Mohan", State = "Karnataka" }); return employees; } } The above class will give me some sample data, I think this will be good enough to start with the actual code. now I am giving below the XAML code from my MainForm.xaml First I will put the Silverlight DataGrid, <data:DataGrid x:Name="gridEmployee" CanUserReorderColumns="False" CanUserSortColumns="False" RowDetailsVisibilityMode="VisibleWhenSelected" HorizontalAlignment="Center" ScrollViewer.VerticalScrollBarVisibility="Auto" Height="200" AutoGenerateColumns="False" Width="350" VerticalAlignment="Center"> Here, the most important property which I am going to set is RowDetailsVisibilityMode="VisibleWhenSelected" This will display the RowDetails only when we select the desired Row. Other option we have in this is Collapsed and Visible. Which will either make the row details always Visible or Always Collapsed. but to get the real effect I have selected VisibleWhenSelected. Now I am going to put the rest of my XAML code. <data:DataGrid.Columns> <!--Begin FirstName Column--> <data:DataGridTextColumn Width="150" Header="First Name" Binding="{Binding FirstName}"/> <!--End FirstName Column--> <!--Begin LastName Column--> <data:DataGridTextColumn Width="150" Header="Last Name" Binding="{Binding LastName}"/> <!--End LastName Column--> </data:DataGrid.Columns> <data:DataGrid.RowDetailsTemplate> <!-- Begin row details section. --> <DataTemplate> <Border BorderBrush="Black" BorderThickness="1" Background="White"> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="0.2*" /> <ColumnDefinition Width="0.8*" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition /> <RowDefinition /> <RowDefinition /> <RowDefinition /> </Grid.RowDefinitions> <!-- Controls are bound to FullAddress properties. --> <TextBlock Text="Address : " Grid.Column="0" Grid.Row="0" /> <TextBlock Text="{Binding Address}" Grid.Column="1" Grid.Row="0" /> <TextBlock Text="City : " Grid.Column="0" Grid.Row="1" /> <TextBlock Text="{Binding City}" Grid.Column="1" Grid.Row="1" /> <TextBlock Text="State : " Grid.Column="0" Grid.Row="2" /> <TextBlock Text="{Binding State}" Grid.Column="1" Grid.Row="2" /> <TextBlock Text="Country : " Grid.Column="0" Grid.Row="3" /> <TextBlock Text="{Binding Country}" Grid.Column="1" Grid.Row="3" /> </Grid> </Border> </DataTemplate> <!-- End row details section. --> </data:DataGrid.RowDetailsTemplate>   In the code above, first I am declaring the simple dataGridTextColumn for FirstName and LastName, and after this I am creating the RowDetailTemplate, where we are just putting the code what we usually do to design the Grid. I mean nothing very much RowDetailTemplate Specific, most of the code which you will see inside the RowDetailsTemplate is plain and simple, where I am binding rest of the Address Column. And that,s it. Once we will bind the DataGrid, you are ready to go. In the code below from MainForm.xaml.cs, I am just binding the DataGrid public partial class MainPage : UserControl { public MainPage() { InitializeComponent(); BindControls(); } private void BindControls() { EmployeeData employees = new EmployeeData(); gridEmployee.ItemsSource = employees.GetEmployeeData(); } } Once you will run, you can see the output I have given in the screenshot above. In this example I have just shown the very basic example, now it up to your creativity and requirement, you can put some other controls like checkbox, Images, even other DataGrid, etc inside this RowDetailsTemplate column. I am attaching my sample source code with this post. I have used Silverlight 3 and Visual Studio 2008, but this is fully compatible with you Silverlight 4 and Visual Studio 2010. you may just need to Upgrade the attached Sample. You can download from here.

    Read the article

  • Random movement of wandering monsters in x & y axis in LibGDX

    - by Vishal Kumar
    I am making a simple top down RPG game in LibGDX. What I want is ... the enemies should wander here and there in x and y directions in certain interval so that it looks natural that they are guarding something. I spend several hours doing this but could not achieve what I want. After a long time of coding, I came with this code. But what I observed is when enemies come to an end of x or start of x or start of y or end of y of the map. It starts flickering for random intervals. Sometimes they remain nice, sometimes, they start flickering for long time. public class Enemy extends Sprite { public float MAX_VELOCITY = 0.05f; public static final int MOVING_LEFT = 0; public static final int MOVING_RIGHT = 1; public static final int MOVING_UP = 2; public static final int MOVING_DOWN = 3; public static final int HORIZONTAL_GUARD = 0; public static final int VERTICAL_GUARD = 1; public static final int RANDOM_GUARD = 2; private float startTime = System.nanoTime(); private static float SECONDS_TIME = 0; private boolean randomDecider; public int enemyType; public static final float width = 30 * World.WORLD_UNIT; public static final float height = 32 * World.WORLD_UNIT; public int state; public float stateTime; public boolean visible; public boolean dead; public Enemy(float x, float y, int enemyType) { super(x, y); state = MOVING_LEFT; this.enemyType = enemyType; stateTime = 0; visible = true; dead = false; boolean random = Math.random()>=0.5f ? true :false; if(enemyType == HORIZONTAL_GUARD){ if(random) velocity.x = -MAX_VELOCITY; else velocity.x = MAX_VELOCITY; } if(enemyType == VERTICAL_GUARD){ if(random) velocity.y = -MAX_VELOCITY; else velocity.y = MAX_VELOCITY; } if(enemyType == RANDOM_GUARD){ //if(random) //velocity.x = -MAX_VELOCITY; //else //velocity.y = MAX_VELOCITY; } } public void update(Enemy e, float deltaTime) { super.update(deltaTime); e.stateTime+= deltaTime; e.position.add(velocity); // This is for updating the Animation for Enemy Movement Direction. VERY IMPORTANT FOR REAL EFFECTS updateDirections(); //Here the various movement methods are called depending upon the type of the Enemy if(e.enemyType == HORIZONTAL_GUARD) guardHorizontally(); if(e.enemyType == VERTICAL_GUARD) guardVertically(); if(e.enemyType == RANDOM_GUARD) guardRandomly(); //quadrantMovement(e, deltaTime); } private void guardHorizontally(){ if(position.x <= 0){ velocity.x= MAX_VELOCITY; velocity.y= 0; } else if(position.x>= World.mapWidth-width){ velocity.x= -MAX_VELOCITY; velocity.y= 0; } } private void guardVertically(){ if(position.y<= 0){ velocity.y= MAX_VELOCITY; velocity.x= 0; } else if(position.y>= World.mapHeight- height){ velocity.y= -MAX_VELOCITY; velocity.x= 0; } } private void guardRandomly(){ if (System.nanoTime() - startTime >= 1000000000) { SECONDS_TIME++; if(SECONDS_TIME % 5==0) randomDecider = Math.random()>=0.5f ? true :false; if(SECONDS_TIME>=30) SECONDS_TIME =0; startTime = System.nanoTime(); } if(SECONDS_TIME <=30){ if(randomDecider && position.x >= 0) velocity.x= -MAX_VELOCITY; else{ if(position.x < World.mapWidth-width) velocity.x= MAX_VELOCITY; else velocity.x= -MAX_VELOCITY; } velocity.y =0; } else{ if(randomDecider && position.y >0) velocity.y= -MAX_VELOCITY; else velocity.y= MAX_VELOCITY; velocity.x =0; } /* //This is essential so as to keep the enemies inside the boundary of the Map if(position.x <= 0){ velocity.x= MAX_VELOCITY; //velocity.y= 0; } else if(position.x>= World.mapWidth-width){ velocity.x= -MAX_VELOCITY; //velocity.y= 0; } else if(position.y<= 0){ velocity.y= MAX_VELOCITY; //velocity.x= 0; } else if(position.y>= World.mapHeight- height){ velocity.y= -MAX_VELOCITY; //velocity.x= 0; } */ } private void updateDirections() { if(velocity.x > 0) state = MOVING_RIGHT; else if(velocity.x<0) state = MOVING_LEFT; else if(velocity.y>0) state = MOVING_UP; else if(velocity.y<0) state = MOVING_DOWN; } public Rectangle getBounds() { return new Rectangle(position.x, position.y, width, height); } private void quadrantMovement(Enemy e, float deltaTime) { int temp = e.getEnemyQuadrant(e.position.x, e.position.y); boolean random = Math.random()>=0.5f ? true :false; switch(temp){ case 1: velocity.x = MAX_VELOCITY; break; case 2: velocity.x = MAX_VELOCITY; break; case 3: velocity.x = -MAX_VELOCITY; break; case 4: velocity.x = -MAX_VELOCITY; break; default: if(random) velocity.x = MAX_VELOCITY; else velocity.y =-MAX_VELOCITY; } } public float getDistanceFromPoint(float p1,float p2){ Vector2 v1 = new Vector2(p1,p2); return position.dst(v1); } private int getEnemyQuadrant(float x, float y){ Rectangle enemyQuad = new Rectangle(x, y, 30, 32); if(ScreenQuadrants.getQuad1().contains(enemyQuad)) return 1; if(ScreenQuadrants.getQuad2().contains(enemyQuad)) return 2; if(ScreenQuadrants.getQuad3().contains(enemyQuad)) return 3; if(ScreenQuadrants.getQuad4().contains(enemyQuad)) return 4; return 0; } } Is there a better way of doing this. I am new to game development. I shall be very grateful to any help or reference.

    Read the article

  • Solaris 10 branded zone VM Templates for Solaris 11 on OTN

    - by jsavit
    Early this year I wrote the article Ours Goes To 11 which describes the ability to import Solaris 10 systems into a "Solaris 10 branded zone" under Oracle Solaris 11. I did this using Solaris 11 Express, and the capability remains in Solaris 11 with only slight changes. This important tool lets you painlessly inhaling a Solaris Container from Solaris 10 or entire Solaris 10 systems ("the global zone") into virtualized environments on a Solaris 11 OS. Just recently, Oracle provided Oracle VM Templates for Oracle Solaris 10 Zones to let you create Solaris 10 branded zones for Solaris 11 even if you don't currently have access to install media or a running Solaris 10 system. To use this, just download the Oracle VM Template for Oracle Solaris Zone 10 from OTN at http://www.oracle.com/technetwork/server-storage/solaris11/downloads/virtual-machines-1355605.html. This page contains images of Oracle Solaris 10 8/11 (the recent update to Solaris 10) in SPARC and x86 formats suitable for creating branded zones. The same page also has a VirtualBox image you can download for a complete Solaris 10 install in a guest virtual machine you can run on any host OS that supports VirtualBox. Both sets of downloads provide a quick - and extremely easy - way to set up a virtual Solaris 10 environment. In the case of the Oracle VM Templates, they illustrate several advanced features of Solaris 11. To start, just go to the above link, download the template for the hardware platform (SPARC or x86) you want, and download the README file also linked from that page. Install prerequisites The README file tells you to install the prerequisite Solaris 11 package that implements the Solaris 10 brand. Then you can install instances of zones with that brand. # pkg install pkg:/system/zones/brand/brand-solaris10 Packages to install: 1 Create boot environment: No Create backup boot environment: Yes DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 44/44 0.4/0.4 PHASE ACTIONS Install Phase 74/74 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 That took only a few minutes, and didn't require a reboot. Install the Solaris 10 zone Now it's time to run the downloaded template file. First make it executable via the chmod command, of course. I found that (unlike stated in the README) there was no need to rename the downloaded file to remove the .bin. When you run it you provide several parameters to describe the zone configuration: -a IP address - the IP address and optional netmask for the zone. This is the only mandatory parameter. -z zonename - the name of the zone you would like to create. -i interface - the package will create an exclusive-IP zone using a virtual NIC (vnic) based on this physical interface. In my case, I have a NIC called rge0. -p PATH - specifies the path in which you want the zoneroot to be placed. In my case, I have a ZFS dataset mounted at /zones, and this will create a zoneroot at /zones/s10u10. Kicking it off, you will see a copyright message, and then messages showing progress building the zone, which only takes a few minutes. # ./solaris-10u10-x86.bin -p /zones -a 192.168.1.100 -i rge0 -z s10u10 ... ... Checking disk-space for extraction Ok Extracting in /export/home/CDimages/s10zone/bootimage.ihaqvh ... 100% [===============================] Checking data integrity Ok Checking platform compatibility The host and the image do not have the same Solaris release: host Solaris release: 5.11 image Solaris release: 5.10 Will create a Solaris 10 branded zone. Warning: could not find a defaultrouter Zone won't have any defaultrouter configured IMAGE: ./solaris-10u10-x86.bin ZONE: s10u10 ZONEPATH: /zones/s10u10 INTERFACE: rge0 VNIC: vnicZBI13379 MAC ADDR: 2:8:20:5c:1a:cc IP ADDR: 192.168.1.100 NETMASK: 255.255.255.0 DEFROUTER: NONE TIMEZONE: US/Arizona Checking disk-space for installation Ok Installing in /zones/s10u10 ... 100% [===============================] Using a static exclusive-IP Attaching s10u10 Booting s10u10 Waiting for boot to complete booting... booting... booting... Zone s10u10 booted The zone's root password has been set using the root password of the local host. You can change the zone's root password to further harden the security of the zone: being root, log into the zone from the local host with the command 'zlogin s10u10'. Once logged in, change the root password with the command 'passwd'. The nifty part in my opinion (besides being so easy), is that the zone was created as an exclusive-IP zone on a virtual NIC. This network configuration lets you enforce traffic isolation from other zones, enforce network Quality of Service, and even let the zone set its own characteristics like IP address and packet size. Independence of the zone's network characteristics from the global zone is one of the enhancements in Solaris 10 that make it easier to consolidate zones while preserving their autonomy, yet provide control in a consolidated environment. Let's see what the virtual network environment looks like by issuing commands from the Solaris 11 global zone. First I'll use Old School ifconfig, and then I'll use the new ipadm and dladm commands. # ifconfig -a4 lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 rge0: flags=1004943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,DHCP,IPv4> mtu 1500 index 2 inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 ether 0:14:d1:18:ac:bc vboxnet0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3 inet 192.168.56.1 netmask ffffff00 broadcast 192.168.56.255 ether 8:0:27:f8:62:1c # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE yge0 Ethernet unknown 0 unknown yge0 yge1 Ethernet unknown 0 unknown yge1 rge0 Ethernet up 1000 full rge0 vboxnet0 Ethernet up 1000 full vboxnet0 # dladm show-link LINK CLASS MTU STATE OVER yge0 phys 1500 unknown -- yge1 phys 1500 unknown -- rge0 phys 1500 up -- vboxnet0 phys 1500 up -- vnicZBI13379 vnic 1500 up rge0 s10u10/vnicZBI13379 vnic 1500 up rge0 s10u10/net0 vnic 1500 up rge0 # dladm show-vnic LINK OVER SPEED MACADDRESS MACADDRTYPE VID vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/net0 rge0 1000 2:8:20:9d:d0:79 random 0 # ipadm show-addr ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8 rge0/_a dhcp ok 192.168.1.3/24 vboxnet0/_a static ok 192.168.56.1/24 lo0/v6 static ok ::1/128 Log into the zone The install step already booted the zone, so lets log into it. Notice how you have to be appropriately privileged to log into a zone. This is my home system so I'm being a bit cavalier, but in a production environment you can give granular control of who can login to which zones. Voila! a Solaris 10 environment under a Solaris 11 kernel. Notice the output from the uname -a and ifconfig commands, and output from a ping to a nearby host. $ zlogin s10u10 zlogin: You lack sufficient privilege to run this command (all privs required) savit@home:~$ sudo zlogin s10u10 Password: [Connected to zone 's10u10' pts/5] Oracle Corporation SunOS 5.10 Generic Patch January 2005 # uname -a SunOS s10u10 5.10 Generic_Virtual i86pc i386 i86pc # ifconfig -a4 lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc # bash bash-3.2# ifconfig -a lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc bash-3.2# ping 192.168.1.2 192.168.1.2 is alive For fun, I configured Apache (setting its configuration file in /etc/apache2) and brought it up. Easy - took just a few minutes. bash-3.2# svcs apache2 STATE STIME FMRI disabled 12:38:46 svc:/network/http:apache2 bash-3.2# svcadm enable apache2 Summary In just a few minutes, I built a functioning virtual Solaris 10 environment under by Solaris 11 system. It was... easy! While I can still do it the manual way (creating and using a system archive), this is a low-effort way to create a Solaris 10 zone on Solaris 11.

    Read the article

  • Cannot install virtualbox-ose-guest-dkms on Ubuntu 10.04

    - by mrduongnv
    I'm using Ubuntu 10.04 and kernel: 2.6.38-11-generic-pae. While using VirtualBox, i got this error: Kernel driver not installed (rc=-1908) Please install the virtualbox-ose-dkms package and execute 'modprobe vboxdrv' as root. I tried to execute the command: sudo modprobe vboxdrv and got this error: FATAL: Module vboxdrv not found. After that, i execute this: sudo aptitude install virtualbox-ose-guest-dkms duongnv@duongnv-laptop:~$ sudo aptitude install virtualbox-ose-guest-dkms Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done The following partially installed packages will be configured: virtualbox-ose-guest-dkms 0 packages upgraded, 0 newly installed, 0 to remove and 105 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Writing extended state information... Done Setting up virtualbox-ose-guest-dkms (3.1.6-dfsg-2ubuntu2) ... Removing old virtualbox-ose-guest-3.1.6 DKMS files... ------------------------------ Deleting module version: 3.1.6 completely from the DKMS tree. ------------------------------ Done. Loading new virtualbox-ose-guest-3.1.6 DKMS files... First Installation: checking all kernels... Building only for 2.6.38-11-generic-pae Building for architecture i686 Building initial module for 2.6.38-11-generic-pae Error! Bad return status for module build on kernel: 2.6.38-11-generic-pae (i686) Consult the make.log in the build directory /var/lib/dkms/virtualbox-ose-guest/3.1.6/build/ for more information. dpkg: error processing virtualbox-ose-guest-dkms (--configure): subprocess installed post-installation script returned error exit status 10 Errors were encountered while processing: virtualbox-ose-guest-dkms E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up virtualbox-ose-guest-dkms (3.1.6-dfsg-2ubuntu2) ... Removing old virtualbox-ose-guest-3.1.6 DKMS files... ------------------------------ Deleting module version: 3.1.6 completely from the DKMS tree. ------------------------------ Done. Loading new virtualbox-ose-guest-3.1.6 DKMS files... First Installation: checking all kernels... Building only for 2.6.38-11-generic-pae Building for architecture i686 Building initial module for 2.6.38-11-generic-pae Error! Bad return status for module build on kernel: 2.6.38-11-generic-pae (i686) Consult the make.log in the build directory /var/lib/dkms/virtualbox-ose-guest/3.1.6/build/ for more information. dpkg: error processing virtualbox-ose-guest-dkms (--configure): subprocess installed post-installation script returned error exit status 10 Errors were encountered while processing: virtualbox-ose-guest-dkms Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done

    Read the article

  • Fan running continously on HP Pavillion G6 notebook with 12.04.1 LTS, help please?

    - by Ankit
    Fan is running continously on my HP Pavillion G6 notebook with 12.04.1 LTS. My system specifications are:- Ram: 6Gb Graphics Card:- 1 GB (AMD Raedon 64XX). HDD: 540 GB. Please find a list of ACPI errors logs from dmesg as follows:- buffer@ankit:~$ dmesg | grep ACPI -i [ 0.000000] BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data) [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000009cffe120 00084 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000009cfec000 0C132 (v01 HP 1670 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 000000009cf6c000 00040 [ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfea000 00D52 (v01 HP 1670 00001000 MSFT 01000013) [ 0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfe4000 00780 (v01 HP 1670 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP 1670 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfdd000 0219F (v01 HP 1670 00001000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.005902] ACPI: Core revision 20110623 [ 0.536006] PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes) [ 0.538423] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.538429] ACPI: bus type pci registered [ 0.656088] ACPI: Added _OSI(Module Device) [ 0.656094] ACPI: Added _OSI(Processor Device) [ 0.656098] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.656103] ACPI: Added _OSI(Processor Aggregator Device) [ 0.660335] ACPI: EC: Look up EC in DSDT [ 0.664416] ACPI: Executed 1 blocks of module-level executable AML code [ 0.728303] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.729536] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.730622] ACPI: Dynamic OEM Table Load: [ 0.730630] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.760829] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.761992] ACPI: Dynamic OEM Table Load: [ 0.761998] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.792451] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.793521] ACPI: Dynamic OEM Table Load: [ 0.793528] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.872981] ACPI: Interpreter enabled [ 0.872992] ACPI: (supports S0 S3 S4 S5) [ 0.873064] ACPI: Using IOAPIC for interrupt routing [ 0.882723] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.883072] ACPI: No dock devices found. [ 0.883084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.883882] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.924187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.924509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.924581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.924659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.924758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.924973] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.925064] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.925069] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.930212] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930327] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930436] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930547] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.930655] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.930764] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.930873] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930979] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.932142] PCI: Using ACPI for IRQ routing [ 0.967119] pnp: PnP ACPI init [ 0.967151] ACPI: bus type pnp registered [ 0.968356] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.968516] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.968586] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.968818] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.968915] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.969206] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.969293] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.969418] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.969528] pnp 00:08: Plug and Play ACPI device, IDs SYN1e3f SYN1e00 SYN0002 PNP0f13 (active) [ 0.969969] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.970574] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.970617] pnp: PnP ACPI: found 11 devices [ 0.970622] ACPI: ACPI bus type pnp unregistered [ 1.138064] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.138331] ACPI: AC Adapter [ACAD] (off-line) [ 1.139068] ACPI: Lid Switch [LID0] [ 1.139176] ACPI: Power Button [PWRB] [ 1.139286] ACPI: Power Button [PWRF] [ 1.144637] ACPI: Thermal Zone [TZ01] (0 C) [ 1.144677] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.144693] ACPI: Battery Slot [BAT0] (battery present) [ 1.206926] ACPI: Battery Slot [BAT0] (battery present) [ 13.176993] acpi device:1a: registered as cooling_device4 [ 13.179931] acpi device:1b: registered as cooling_device5 [ 13.180221] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 13.219589] acpi device:20: registered as cooling_device6 [ 13.220851] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1649.915134] i8042 aux 00:08: wake-up capability disabled by ACPI [ 1649.915147] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 1650.931028] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 1650.954743] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 1650.978733] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 1651.010950] ACPI: Preparing to enter system sleep state S3 [ 1652.251505] ACPI: Low-level resume complete [ 1652.360953] ACPI: Waking up from system sleep state S3 [ 1652.427581] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 1652.435579] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 1652.437887] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 1652.506660] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 1661.238234] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 1661.238253] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 1661.238268] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [ 3151.784288] i8042 aux 00:08: wake-up capability disabled by ACPI [ 3151.784301] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 3152.797676] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 3152.821379] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 3152.845367] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 3152.877600] ACPI: Preparing to enter system sleep state S3 [ 3154.313213] ACPI: Low-level resume complete [ 3154.422297] ACPI: Waking up from system sleep state S3 [ 3154.489692] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 3154.497667] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 3154.505947] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 3154.568985] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 3162.745149] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 3162.745168] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 3162.745183] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [ 6775.723501] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 6775.723519] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 6775.723535] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [10388.004760] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [10388.004778] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [10388.004801] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [10723.591930] i8042 aux 00:08: wake-up capability disabled by ACPI [10723.591942] i8042 kbd 00:07: wake-up capability enabled by ACPI [10724.607624] r8169 0000:03:00.0: wake-up capability enabled by ACPI [10724.631349] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [10724.655339] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [10724.687572] ACPI: Preparing to enter system sleep state S3 [10726.123176] ACPI: Low-level resume complete [10726.232181] ACPI: Waking up from system sleep state S3 [10726.303653] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [10726.311648] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [10726.315734] r8169 0000:03:00.0: wake-up capability disabled by ACPI [10726.379287] i8042 kbd 00:07: wake-up capability disabled by ACPI [10734.393523] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [10734.393542] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [10734.393557] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/ps Continuous sound from the fan is very annoying, any help would highly appreciated.

    Read the article

  • What’s New in Delphi XE6 Regular Expressions

    - by Jan Goyvaerts
    There’s not much new in the regular expression support in Delphi XE6. The big change that should be made, upgrading to PCRE 8.30 or later and switching to the pcre16 functions that use UTF-16, still hasn’t been made. XE6 still uses PCRE 7.9 and thus continues to require conversion from the UTF-16 strings that Delphi uses natively to the UTF-8 strings that older versions of PCRE require. Delphi XE6 does fix one important issue that has plagued TRegEx since it was introduced in Delphi XE. Previously, TRegEx could not find zero-length matches. So a regex like (?m)^ that should find a zero-length match at the start of each line would not find any matches at all with TRegEx. The reason for this is that TRegEx uses TPerlRegEx to do the heavy lifting. TPerlRegEx sets its State property to [preNotEmpty] in its constructor, which tells it to skip zero-length matches. This is not a problem with TPerlRegEx because users of this class can change the State property. But TRegEx does not provide a way to change this property. So in Delphi XE5 and prior, TRegEx cannot find zero-length matches. In Delphi XE6 TPerlRegEx’s constructor was changed to initialize State to the empty set. This means TRegEx is now able to find zero-length matches. TRegex.Replace() using the regex (?m)^ now inserts the replacement at the start of each line, as you would expect. If you use TPerlRegEx directly, you’ll need to set State to [preNotEmpty] in your own code if you relied on its behavior to skip zero-length matches. You will need to check existing applications that use TRegEx for regular expressions that incorrectly allow zero-length matches. In XE5 and prior, TRegEx using \d* would match all numbers in a string. In XE6, the same regex still matches all numbers, but also finds a zero-length match at each position in the string. RegexBuddy 4 warns about zero-length matches on the Create panel if you set it to Detailed mode. At the bottom of the regex tree there will be a node saying either “your regular expression may find zero-length matches” or “zero-length matches will be skipped” depending on whether your application allows zero-length matches (XE6 TRegEx) or not (XE–XE5 TRegEx).

    Read the article

  • WCF – interchangeable data-contract types

    - by nmarun
    In a WSDL based environment, unlike a CLR-world, we pass around the ‘state’ of an object and not the reference of an object. Well firstly, what does ‘state’ mean and does this also mean that we can send a struct where a class is expected (or vice-versa) as long as their ‘state’ is one and the same? Let’s see. So I have an operation contract defined as below: 1: [ServiceContract] 2: public interface ILearnWcfServiceExtend : ILearnWcfService 3: { 4: [OperationContract] 5: Employee SaveEmployee(Employee employee); 6: } 7:  8: [ServiceBehavior] 9: public class LearnWcfService : ILearnWcfServiceExtend 10: { 11: public Employee SaveEmployee(Employee employee) 12: { 13: employee.EmployeeId = 123; 14: return employee; 15: } 16: } Quite simplistic operation there (which translates to ‘absolutely no business value’). Now, the data contract Employee mentioned above is a struct. 1: public struct Employee 2: { 3: public int EmployeeId { get; set; } 4:  5: public string FName { get; set; } 6: } After compilation and consumption of this service, my proxy (in the Reference.cs file) looks like below (I’ve ignored the rest of the details just to avoid unwanted confusion): 1: public partial struct Employee : System.Runtime.Serialization.IExtensibleDataObject, System.ComponentModel.INotifyPropertyChanged I call the service with the code below: 1: private static void CallWcfService() 2: { 3: Employee employee = new Employee { FName = "A" }; 4: Console.WriteLine("IsValueType: {0}", employee.GetType().IsValueType); 5: Console.WriteLine("IsClass: {0}", employee.GetType().IsClass); 6: Console.WriteLine("Before calling the service: {0} - {1}", employee.EmployeeId, employee.FName); 7: employee = LearnWcfServiceClient.SaveEmployee(employee); 8: Console.WriteLine("Return from the service: {0} - {1}", employee.EmployeeId, employee.FName); 9: } The output is: I now change my Employee type from a struct to a class in the proxy class and run the application: 1: public partial class Employee : System.Runtime.Serialization.IExtensibleDataObject, System.ComponentModel.INotifyPropertyChanged { The output this time is: The state of an object implies towards its composition, the properties and the values of these properties and not based on whether it is a reference type (class) or a value type (struct). And as shown above, we’re actually passing an object by its state and not by reference. Continuing on the same topic of ‘type-interchangeability’, WCF treats two data contracts as equivalent if they have the same ‘wire-representation’. We can do so using the DataContract and DataMember attributes’ Name property. 1: [DataContract] 2: public struct Person 3: { 4: [DataMember] 5: public int Id { get; set; } 6:  7: [DataMember] 8: public string FirstName { get; set; } 9: } 10:  11: [DataContract(Name="Person")] 12: public class Employee 13: { 14: [DataMember(Name = "Id")] 15: public int EmployeeId { get; set; } 16:  17: [DataMember(Name="FirstName")] 18: public string FName { get; set; } 19: } I’ve created two data contracts with the exact same wire-representation. Just remember that the names and the types of data members need to match to be considered equivalent. The question then arises as to what gets generated in the proxy class. Despite us declaring two data contracts (Person and Employee), only one gets emitted – Person. This is because we’re saying that the Employee type has the same wire-representation as the Person type. Also that the signature of the SaveEmployee operation gets changed on the proxy side: 1: [System.CodeDom.Compiler.GeneratedCodeAttribute("System.ServiceModel", "4.0.0.0")] 2: [System.ServiceModel.ServiceContractAttribute(ConfigurationName="ServiceProxy.ILearnWcfServiceExtend")] 3: public interface ILearnWcfServiceExtend 4: { 5: [System.ServiceModel.OperationContractAttribute(Action="http://tempuri.org/ILearnWcfServiceExtend/SaveEmployee", ReplyAction="http://tempuri.org/ILearnWcfServiceExtend/SaveEmployeeResponse")] 6: ClientApplication.ServiceProxy.Person SaveEmployee(ClientApplication.ServiceProxy.Person employee); 7: } But, on the service side, the SaveEmployee still accepts and returns an Employee data contract. 1: [ServiceBehavior] 2: public class LearnWcfService : ILearnWcfServiceExtend 3: { 4: public Employee SaveEmployee(Employee employee) 5: { 6: employee.EmployeeId = 123; 7: return employee; 8: } 9: } Despite all these changes, our output remains the same as the last one: This is type-interchangeability at work! Here’s one more thing to ponder about. Our Person type is a struct and Employee type is a class. Then how is it that the Person type got emitted as a ‘class’ in the proxy? It’s worth mentioning that WSDL describes a type called Employee and does not say whether it is a class or a struct (see the SOAP message below): 1: <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" 2: xmlns:tem="http://tempuri.org/" 3: xmlns:ser="http://schemas.datacontract.org/2004/07/ServiceApplication"> 4: <soapenv:Header/> 5: <soapenv:Body> 6: <tem:SaveEmployee> 7: <!--Optional:--> 8: <tem:employee> 9: <!--Optional:--> 10: <ser:EmployeeId>?</ser:EmployeeId> 11: <!--Optional:--> 12: <ser:FName>?</ser:FName> 13: </tem:employee> 14: </tem:SaveEmployee> 15: </soapenv:Body> 16: </soapenv:Envelope> There are some differences between how ‘Add Service Reference’ and the svcutil.exe generate the proxy class, but turns out both do some kind of reflection and determine the type of the data contract and emit the code accordingly. So since the Employee type is a class, the proxy ‘Person’ type gets generated as a class. In fact, reflecting on svcutil.exe application, you’ll see that there are a couple of places wherein a flag actually determines a type as a class or a struct. One example is in the ExportISerializableDataContract method in the System.Runtime.Serialization.CodeExporter class. Seems like these flags have a say in deciding whether the type gets emitted as a struct or a class. This behavior is different if you use the WSDL tool though. WSDL tool does not do any kind of reflection of the data contract / serialized type, it emits the type as a class by default. You can check this using the two command lines below:   Note to self: Remember ‘state’ and type-interchangeability when traversing through the WSDL planet!

    Read the article

  • Adaptec 5805 after reboot don't starting

    - by Rakedko ShotGuns
    After rebooting the system, the controller is not included. It only works if the computer is shut down and turn off. Late i update firmware "Adaptec RAID 5805 Firmware Build 18948" How to fix the problem? add Log Configuration summary Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priorityHigh Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1 List item

    Read the article

  • OSU Marching Band Delivers Impressive Half-Time Tribute to Video Games

    - by Jason Fitzpatrick
    This Saturday, during the Ohio State-Nebraska game halftime, the Ohio State University marching band paid tribute to decades of popular video games in an impressively choreographed 10 minute show. The video starts off a little shaky, but once the crowd settles down to watch the show things get significantly smoother. How many of the games do you recognize? [via Reddit] 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

    Read the article

  • UDK game Prisoners/Guards

    - by RR_1990
    For school I need to make a little game with UDK, the concept of the game is: The player is the headguard, he will have some other guard (bots) who will follow him. Between the other guards and the player are some prisoners who need to evade the other guards. It needs to look like this My idea was to let the guard bots follow the player at a certain distance and let the prisoners bots in the middle try to evade the guard bots. Now is the problem i'm new to Unreal Script and the school doesn't support me that well. Untill now I have only was able to make the guard bots follow me. I hope you guys can help me or make me something that will make this game work. Here is the class i'm using to let te bots follow me: class ChaseControllerAI extends AIController; var Pawn player; var float minimalDistance; var float speed; var float distanceToPlayer; var vector selfToPlayer; auto state Idle { function BeginState(Name PreviousStateName) { Super.BeginState(PreviousStateName); } event SeePlayer(Pawn p) { player = p; GotoState('Chase'); } Begin: player = none; self.Pawn.Velocity.x = 0.0; self.Pawn.Velocity.Y = 0.0; self.Pawn.Velocity.Z = 0.0; } state Chase { function BeginState(Name PreviousStateName) { Super.BeginState(PreviousStateName); } event PlayerOutOfReach() { `Log("ChaseControllerAI CHASE Player out of reach."); GotoState('Idle'); } // class ChaseController extends AIController; CONTINUED // State Chase (continued) event Tick(float deltaTime) { `Log("ChaseControllerAI in Event Tick."); selfToPlayer = self.player.Location - self.Pawn.Location; distanceToPlayer = Abs(VSize(selfToPlayer)); if (distanceToPlayer > minimalDistance) { PlayerOutOfReach(); } else { self.Pawn.Velocity = Normal(selfToPlayer) * speed; //self.Pawn.Acceleration = Normal(selfToPlayer) * speed; self.Pawn.SetRotation(rotator(selfToPlayer)); self.Pawn.Move(self.Pawn.Velocity*0.001); // or *deltaTime } } Begin: `Log("Current state Chase:Begin: " @GetStateName()@""); } defaultproperties { bAdjustFromWalls=true; bIsPlayer= true; minimalDistance = 1024; //org 1024 speed = 500; }

    Read the article

  • If unexpected database changes cause you problems – we can help!

    - by Chris Smith
    Have you ever been surprised by an unexpected difference between you database environments? Have you ever found that your Staging database is not the same as your Production database, even though it was the week before? Has an emergency hotfix suddenly appeared in Production over the weekend without your knowledge? Has your client secretly added a couple of indices to their local version of the database to aid performance? Worse still, has a developer ever accidently run a SQL script against the wrong database without noticing their mistake? If you’ve answered “Yes” to any of the above questions then you’ve suffered from ‘drift’. Database drift is where the state of a database (schema, particularly) has moved away from its expected or official state over time. The upshot is that the database is in an unknown or poorly-understood state. Even if these unexpected changes are not destructive, drift can be a big problem when it’s time to release a new version of the database. A deployment to a target database in an unexpected state can error and fail, potentially delaying a vital, time-sensitive update. A big issue with drift is that it can be hard to spot and it can be even harder to determine its provenance. So, before you can deal with an issue caused by drift, you’ll need to know exactly what change has been made, who made it, when they made it and why they made it. Those questions can take a lot of effort to answer. Then you actually need to decide what to do. Do you rollback the change because it was bad? Retrospectively apply it to the Staging environment because it is a required change? Or script the change into version control to get it back in line with your process? Red Gate’s Database Delivery Team have been talking to DBAs, database consultants and database developers to explore the problem of drift. We’ve started to get a really good idea of how big a problem it can be and what database professionals need to know and do, in order to deal with it.  It’s fair to say, we’re pretty excited at the prospect of creating a tool that will really help and we’ve got some great feedback on our initial ideas (see image below).   We’re now well underway with the development of our new drift-spotting product – SQL Lighthouse – and we hope to have a beta release out towards the end of July. What we really need is your help to shape the product into a great tool. So, if database drift is a problem that you’d like help solving and are interested in finding out more about our product, join our mailing list to register your interest in trying out the beta release. Subscribe to our mailing list

    Read the article

  • When to use SOAP over REST

    So, how does REST based services differ from SOAP based services, and when should you use SOAP? Representational State Transfer (REST) implements the standard HTTP/HTTPS as an interface allowing clients to obtain access to resources based on requested URIs. An example of a URI may look like this http://mydomain.com/service/method?parameter=var1&parameter=var2. It is important to note that REST based services are stateless because http/https is natively stateless. One of the many benefits for implementing HTTP/HTTPS as an interface is can be found in caching. Caching can be done on a web service much like caching is done on requested web pages. Caching allows for reduced web server processing and increased response times because content is already processed and stored for immediate access. Typical actions performed by REST based services include generic CRUD (Create, Read, Update, and Delete) operations and operations that do not require state. Simple Object Access Protocol (SOAP) on the other hand uses a generic interface in order to transport messages. Unlike REST, SOAP can use HTTP/HTTPS, SMTP, JMS, or any other standard transport protocols. Furthermore, SOAP utilizes XML in the following ways: Define a message Defines how a message is to be processed Defines the encoding of a message Lays out procedure calls and responses As REST aligns more with a Resource View, SOAP aligns more with a Method View in that business logic is exposed as methods typically through SOAP web service because they can retain state. In addition, SOAP requests are not cached therefore every request will be processed by the server. As stated before Soap does retain state and this gives it a special advantage over REST for services that need to preform transactions where multiple calls to a service are need in order to complete a task. Additionally, SOAP is more ideal for enterprise level services that implement standard exchange formats in the form of contracts due to the fact that REST does not currently support this. A real world example of where SOAP is preferred over REST can be seen in the banking industry where money is transferred from one account to another. SOAP would allow a bank to perform a transaction on an account and if the transaction failed, SOAP would automatically retry the transaction ensuring that the request was completed. Unfortunately, with REST, failed service calls must be handled manually by the requesting application. References: Francia, S. (2010). SOAP vs. REST. Retrieved 11 20, 2011, from spf13: http://spf13.com/post/soap-vs-rest Rozlog, M. (2010). REST and SOAP: When Should I Use Each (or Both)? Retrieved 11 20, 2011, from Infoq.com: http://www.infoq.com/articles/rest-soap-when-to-use-each

    Read the article

  • Why MySQL sat for 2 minutes doing nothing?

    - by Alex R
    This was a one-time thing, not reproducible... But I saved the show innodb status output. Can anybody tell what's going on here? The simple insert took almost 3 minutes to complete. | InnoDB | | ===================================== 110201 15:58:10 INNODB MONITOR OUTPUT ===================================== Per second averages calculated from the last 34 seconds ---------- SEMAPHORES ---------- OS WAIT ARRAY INFO: reservation count 11963, signal count 11766 --Thread 1824 has waited at .\btr\btr0cur.c line 443 for 118.00 seconds the sema phore: S-lock on RW-latch at 09D6453C created in file .\buf\buf0buf.c line 550 a writer (thread id 1824) has reserved it in mode wait exclusive number of readers 1, waiters flag 1 Last time read locked in file .\buf\buf0flu.c line 599 Last time write locked in file .\btr\btr0cur.c line 443 Mutex spin waits 0, rounds 527817, OS waits 7133 RW-shared spins 2532, OS waits 1226; RW-excl spins 1652, OS waits 1118 ------------ TRANSACTIONS ------------ Trx id counter 0 95830 Purge done for trx's n:o < 0 95814 undo n:o < 0 0 History list length 11 LIST OF TRANSACTIONS FOR EACH SESSION: ---TRANSACTION 0 0, not started, OS thread id 3704 MySQL thread id 551, query id 2702112 localhost 127.0.0.1 root show innodb status ---TRANSACTION 0 95829, not started, OS thread id 3132 MySQL thread id 534, query id 2702020 localhost 127.0.0.1 root ---TRANSACTION 0 95828, not started, OS thread id 3152 MySQL thread id 527, query id 2701973 localhost 127.0.0.1 root ---TRANSACTION 0 95827, ACTIVE 118 sec, OS thread id 1824 inserting, thread decl ared inside InnoDB 500 mysql tables in use 1, locked 1 1 lock struct(s), heap size 320, 0 row lock(s) MySQL thread id 526, query id 2701972 localhost 127.0.0.1 root update INSERT INTO log_searchcriteria (userid,search_criteria,date,search_type) VALUES ( NAME_CONST('userid',NULL), NAME_CONST('search_criteria',_latin1' SELECT SQL_C ALC_FOUND_ROWS idx_search.CTCX_LATITUDE, idx_search.CTCX_LONGITUDE, idx_search.b uilding_id, idx_search.LN_LIST_NUMBER, idx_search.LP_LIST_PRICE, idx_search.HSN_ ADRESS_HOUSE_NUMBER, idx_search.STR_ADDRESS_STREET, idx_search.CP_ADDRESS_COMPAS S_POINT, idx_search.UN_UNIT, idx_search.CIT_CITY, idx_search.ZP_ZIP_CODE, idx_se arch.AR_AREA_NAME, idx_search.BR_BEDROOMS, idx_search.BTH_BATHS, idx_search.ST_S TATUS, idx_search.CTCX_STYLE_TYPE, idx_s -------- FILE I/O -------- I/O thread 0 state: wait Windows aio (insert buffer thread) I/O thread 1 state: wait Windows aio (log thread) I/O thread 2 state: wait Windows aio (read thread) I/O thread 3 state: wait Windows aio (write thread) Pending normal aio reads: 0, aio writes: 1, ibuf aio reads: 0, log i/o's: 0, sync i/o's: 0 Pending flushes (fsync) log: 0; buffer pool: 0 151006 OS file reads, 120758 OS file writes, 6844 OS fsyncs 0.00 reads/s, 0 avg bytes/read, 0.00 writes/s, 0.00 fsyncs/s ------------------------------------- INSERT BUFFER AND ADAPTIVE HASH INDEX ------------------------------------- Ibuf: size 1, free list len 5, seg size 7, 24664 inserts, 24664 merged recs, 4612 merges Hash table size 553253, node heap has 629 buffer(s) 0.00 hash searches/s, 0.00 non-hash searches/s --- LOG --- Log sequence number 5 2318193115 Log flushed up to 5 2318193115 Last checkpoint at 5 2318129891 0 pending log writes, 0 pending chkp writes 3036 log i/o's done, 0.00 log i/o's/second ---------------------- BUFFER POOL AND MEMORY ---------------------- Total memory allocated 213459462; in additional pool allocated 1720192 Dictionary memory allocated 240416 Buffer pool size 8192 Free buffers 0 Database pages 7563 Modified db pages 18 Pending reads 0 Pending writes: LRU 0, flush list 18, single page 0 Pages read 150973, created 28788, written 115137 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout -------------- ROW OPERATIONS -------------- 1 queries inside InnoDB, 0 queries in queue 1 read views open inside InnoDB Main thread id 2992, state: flushing buffer pool pages Number of rows inserted 794294, updated 89203, deleted 13698, read 1453084305 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 0.00 reads/s ---------------------------- END OF INNODB MONITOR OUTPUT ============================ Thanks

    Read the article

  • Saving user details on OnSuspending event for Metro Style Apps

    - by nmarun
    I recently started getting to know about Metro Style Apps on Windows 8. It looks pretty interesting so far and VS2011 definitely helps making it easier to learn and create Metro Style Apps. One of the features available for developers is the ability to save user data so it can be retrieved the next time the app is run after being closed by the user or even launched from back suspended state. Here’s a little history on this whole ‘suspended’ state of a Metro Style app: Once the user say, ‘alt+tab...(read more)

    Read the article

  • Disable XF86Back and XF86Forward (back/forward on Lenovo Thinkpad)

    - by Nicolas Raoul
    My Thinkpad R500 has back/forward keys just about the direction keys, so on Firefox I keep losing entered text, accidentally. How to disable these back/forward keys? Excerpt from xev: KeyPress event, serial 29, synthetic NO, window 0x5e00001, root 0xbc, subw 0x0, time 2375874, (1279,794), root:(1285,881), state 0x10, keycode 166 (keysym 0x1008ff26, XF86Back), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 32, synthetic NO, window 0x5e00001, root 0xbc, subw 0x0, time 2377115, (1279,794), root:(1285,881), state 0x10, keycode 167 (keysym 0x1008ff27, XF86Forward), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >