Search Results

Search found 7902 results on 317 pages for 'structure'.

Page 67/317 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • Microsoft .NET Web Programming: Web Sites versus Web Applications

    - by SAMIR BHOGAYTA
    In .NET 2.0, Microsoft introduced the Web Site. This was the default way to create a web Project in Visual Studio 2005. In Visual Studio 2008, the Web Application has been restored as the default web Project in Visual Studio/.NET 3.x The Web Site is a file/folder based Project structure. It is designed such that pages are not compiled until they are requested ("on demand"). The advantages to the Web Site are: 1) It is designed to accommodate non-.NET Applications 2) Deployment is as simple as copying files to the target server 3) Any portion of the Web Site can be updated without requiring recompilation of the entire Site. The Web Application is a .dll-based Project structure. ASP.NET pages and supporting files are compiled into assemblies that are then deployed to the target server. Advantages of the Web Application are: 1) Precompiled files do not expose code to an attacker 2) Precompiled files run faster because they are binary data (the Microsoft Intermediate Language, or MSIL) executed by the CLR (Common Language Runtime) 3) References, assemblies, and other project dependencies are built in to the compiled site and automatically managed. They do not need to be manually deployed and/or registered in the Global Assembly Cache: deployment does this for you If you are planning on using automated build and deployment, such as the Team Foundation Server Team Build engine, you will need to have your code in the form of a Web Application. If you have a Web Site, it will not properly compile as a Web Application would. However, all is not lost: it is possible to work around the issue by adding a Web Deployment Project to your Solution and then: a) configuring the Web Deployment Project to precompile your code; and b) configuring your Team Build definition to use the Web Deployment Project as its source for compilation. https://msevents.microsoft.com/cui/WebCastEventDetails.aspx?culture=en-US&EventID=1032380764&CountryCode=US

    Read the article

  • Best Practices for Renaming, Refactoring, and Breaking Changes with Teams

    - by David in Dakota
    What are some Best Practices for refactoring and renaming in team environments? I bring this up with a few scenarios in mind: If a library that is commonly referenced is refactored to introduce a breaking change to any library or project that references it. E.g. arbitrarily changing the name of a method. If projects are renamed and solutions must be rebuilt with updated references to them. If project structure is changed to be "more organized" by introducing folders and moving existing projects or solutions to new locations. Some additional thoughts/questions: Should changes like this matter or is resulting pain an indication of structure gone awry? Who should take responsibility for fixing errors related to a breaking change? If a developer makes a breaking change should they be responsible for going into affected projects and updating them or should they alert other developers and prompt them to change things? Is this something that can be done on a scheduled basis or is it something that should be done as frequently as possible? If a refactoring is put off for too long it is increasingly difficult to reconcile but at the same time in a day spending 1 hour increments fixing a build because of changes happening elsewhere. Is this a matter of a formal communication process or can it be organic?

    Read the article

  • Adding Custom Fields to RadScheduler for WinForms Appointments

    When using RadScheduler for WinForms, it will almost always need to be customized in some way. This could come in the form of custom dialogs, context menus, or even custom appointments. In this blog entry, I am going to explain the steps required to add a custom field to RadScheduler. Click here to download the source code and follow along... Adding Custom Fields to Appointments In this example, a custom field for Email will be added to the Appointment class being used by RadScheduler. The process of accomplishing this involves five simple steps. Step 1: Add a Custom Field to the Data Source In order to display a custom field in RadScheduler, the field will first need to already exist in, or be added to the data source. In this example, the database being used is based on the structure of the SchedulerData sample database included with the installation of RadControls for WinForms. Figure 1 shows the structure of the database. Note ...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • We Don’t Need No Regions

    - by João Angelo
    If your code reaches a level where you want to hide it behind regions then you have a problem that regions won’t solve. Regions are good to hide things that you don’t want to have knowledge about such as auto-generated code. Normally, when you’re developing you end up reading more code than you write it so why would you want to complicate the reading process. I, for one, would love to have that one discussion around regions where someone convinces me that they solve a problem that has no other alternative solution, but I’m still waiting. The most frequent argument I hear about regions is that they allow you to structure your code, but why don’t just structure it using classes, methods and all that other stuff that OOP is about because at the end of the day, you should be doing object oriented programming and not region oriented programming. Having said that, I do believe that sometimes is helpful to have a quick overview of a code file contents and Visual Studio allows you to do just that through the Collapse to Definitions command (CTRL + M, CTRL + O) which collapses the members of all types; if you like regions, you should try this, it is much more useful to read all the members of a type than all the regions inside a type.

    Read the article

  • Auto-Suggest via &lsquo;Trie&rsquo; (Pre-fix Tree)

    - by Strenium
    Auto-Suggest (Auto-Complete) “thing” has been around for a few years. Here’s my little snippet on the subject. For one of my projects, I had to deal with a non-trivial set of items to be pulled via auto-suggest used by multiple concurrent users. Simple, dumb iteration through a list in local cache or back-end access didn’t quite cut it. Enter a nifty little structure, perfectly suited for storing and matching verbal data: “Trie” (http://tinyurl.com/db56g) also known as a Pre-fix Tree: “Unlike a binary search tree, no node in the tree stores the key associated with that node; instead, its position in the tree defines the key with which it is associated. All the descendants of a node have a common prefix of the string associated with that node, and the root is associated with the empty string. Values are normally not associated with every node, only with leaves and some inner nodes that correspond to keys of interest.” This is a very scalable, performing structure. Though, as usual, something ‘fast’ comes at a cost of ‘size’; fortunately RAM is more plentiful today so I can live with that. I won’t bore you with the detailed algorithmic performance here - Google can do a better job of such. So, here’s C# implementation of all this. Let’s start with individual node: Trie Node /// <summary> /// Contains datum of a single trie node. /// </summary> public class AutoSuggestTrieNode {     public char Value { get; set; }       /// <summary>     /// Gets a value indicating whether this instance is leaf node.     /// </summary>     /// <value>     ///     <c>true</c> if this instance is leaf node; otherwise, a prefix node <c>false</c>.     /// </value>     public bool IsLeafNode { get; private set; }       public List<AutoSuggestTrieNode> DescendantNodes { get; private set; }         /// <summary>     /// Initializes a new instance of the <see cref="AutoSuggestTrieNode"/> class.     /// </summary>     /// <param name="value">The phonetic value.</param>     /// <param name="isLeafNode">if set to <c>true</c> [is leaf node].</param>     public AutoSuggestTrieNode(char value = ' ', bool isLeafNode = false)     {         Value = value;         IsLeafNode = isLeafNode;           DescendantNodes = new List<AutoSuggestTrieNode>();     }       /// <summary>     /// Gets the descendants of the pre-fix node, if any.     /// </summary>     /// <param name="descendantValue">The descendant value.</param>     /// <returns></returns>     public AutoSuggestTrieNode GetDescendant(char descendantValue)     {         return DescendantNodes.FirstOrDefault(descendant => descendant.Value == descendantValue);     } }   Quite self-explanatory, imho. A node is either a “Pre-fix” or a “Leaf” node. “Leaf” contains the full “word”, while the “Pre-fix” nodes act as indices used for matching the results.   Ok, now the Trie: Trie Structure /// <summary> /// Contains structure and functionality of an AutoSuggest Trie (Pre-fix Tree) /// </summary> public class AutoSuggestTrie {     private readonly AutoSuggestTrieNode _root = new AutoSuggestTrieNode();       /// <summary>     /// Adds the word to the trie by breaking it up to pre-fix nodes + leaf node.     /// </summary>     /// <param name="word">Phonetic value.</param>     public void AddWord(string word)     {         var currentNode = _root;         word = word.Trim().ToLower();           for (int i = 0; i < word.Length; i++)         {             var child = currentNode.GetDescendant(word[i]);               if (child == null) /* this character hasn't yet been indexed in the trie */             {                 var newNode = new AutoSuggestTrieNode(word[i], word.Count() - 1 == i);                   currentNode.DescendantNodes.Add(newNode);                 currentNode = newNode;             }             else                 currentNode = child; /* this character is already indexed, move down the trie */         }     }         /// <summary>     /// Gets the suggested matches.     /// </summary>     /// <param name="word">The phonetic search value.</param>     /// <returns></returns>     public List<string> GetSuggestedMatches(string word)     {         var currentNode = _root;         word = word.Trim().ToLower();           var indexedNodesValues = new StringBuilder();         var resultBag = new ConcurrentBag<string>();           for (int i = 0; i < word.Trim().Length; i++)  /* traverse the trie collecting closest indexed parent (parent can't be leaf, obviously) */         {             var child = currentNode.GetDescendant(word[i]);               if (child == null || word.Count() - 1 == i)                 break; /* done looking, the rest of the characters aren't indexed in the trie */               indexedNodesValues.Append(word[i]);             currentNode = child;         }           Action<AutoSuggestTrieNode, string> collectAllMatches = null;         collectAllMatches = (node, aggregatedValue) => /* traverse the trie collecting matching leafNodes (i.e. "full words") */             {                 if (node.IsLeafNode) /* full word */                     resultBag.Add(aggregatedValue); /* thread-safe write */                   Parallel.ForEach(node.DescendantNodes, descendandNode => /* asynchronous recursive traversal */                 {                     collectAllMatches(descendandNode, String.Format("{0}{1}", aggregatedValue, descendandNode.Value));                 });             };           collectAllMatches(currentNode, indexedNodesValues.ToString());           return resultBag.OrderBy(o => o).ToList();     }         /// <summary>     /// Gets the total words (leafs) in the trie. Recursive traversal.     /// </summary>     public int TotalWords     {         get         {             int runningCount = 0;               Action<AutoSuggestTrieNode> traverseAllDecendants = null;             traverseAllDecendants = n => { runningCount += n.DescendantNodes.Count(o => o.IsLeafNode); n.DescendantNodes.ForEach(traverseAllDecendants); };             traverseAllDecendants(this._root);               return runningCount;         }     } }   Matching operations and Inserts involve traversing the nodes before the right “spot” is found. Inserts need be synchronous since ordering of data matters here. However, matching can be done in parallel traversal using recursion (line 64). Here’s sample usage:   [TestMethod] public void AutoSuggestTest() {     var autoSuggestCache = new AutoSuggestTrie();       var testInput = @"Lorem ipsum dolor sit amet, consectetur adipiscing elit. Integer nec odio. Praesent libero.                 Sed cursus ante dapibus diam. Sed nisi. Nulla quis sem at nibh elementum imperdiet. Duis sagittis ipsum. Praesent mauris.                 Fusce nec tellus sed augue semper porta. Mauris massa. Vestibulum lacinia arcu eget nulla. Class aptent taciti sociosqu ad                 litora torquent per conubia nostra, per inceptos himenaeos. Curabitur sodales ligula in libero. Sed dignissim lacinia nunc.                 Curabitur tortor. Pellentesque nibh. Aenean quam. In scelerisque sem at dolor. Maecenas mattis. Sed convallis tristique sem.                 Proin ut ligula vel nunc egestas porttitor. Morbi lectus risus, iaculis vel, suscipit quis, luctus non, massa. Fusce ac                 turpis quis ligula lacinia aliquet. Mauris ipsum. Nulla metus metus, ullamcorper vel, tincidunt sed, euismod in, nibh. Quisque                 volutpat condimentum velit. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Nam                 nec ante. Sed lacinia, urna non tincidunt mattis, tortor neque adipiscing diam, a cursus ipsum ante quis turpis. Nulla                 facilisi. Ut fringilla. Suspendisse potenti. Nunc feugiat mi a tellus consequat imperdiet. Vestibulum sapien. Proin quam. Etiam                 ultrices. Suspendisse in justo eu magna luctus suscipit. Sed lectus. Integer euismod lacus luctus magna. Quisque cursus, metus                 vitae pharetra auctor, sem massa mattis sem, at interdum magna augue eget diam. Vestibulum ante ipsum primis in faucibus orci                 luctus et ultrices posuere cubilia Curae; Morbi lacinia molestie dui. Praesent blandit dolor. Sed non quam. In vel mi sit amet                 augue congue elementum. Morbi in ipsum sit amet pede facilisis laoreet. Donec lacus nunc, viverra nec.";       testInput.Split(' ').ToList().ForEach(word => autoSuggestCache.AddWord(word));       var testMatches = autoSuggestCache.GetSuggestedMatches("le"); }   ..and the result: That’s it!

    Read the article

  • Working with Legacy code #1 : Draw up a plan.

    - by andrewstopford
    Blackfield applications are a minefield, reaking of smells and awash with technical debt. The codebase is a living hell. Your first plan of attack is a plan. Your boss (be that you, your manager, your client or whoever) needs to understand what you are trying to achieve and in what time. Your team needs to know what the plan of attack will be and where. Start with the greatest pain points, what are the biggest areas of technical debt, what takes the most time to work with\change and where are the areas with the higest number of defects. Work out what classes\functions are mud balls and where all the hard dependencies are. In working out the pain points you will begin to understand structure (or lack of) and where the fundmentals are. If know one in the team knows an area then profile it, understand what lengths the code is going to.  When your done drawing up the list then work out what the common problems are, is the code hard tied to the database, file system or some other hard dependency. Is the code repeating it's self in structure\form over and over etc. From the list work out what are the areas with the biggest number of problems and make those your starting point. Now you have a plan of what needs to change and where then you can work out how it fits into your development plan. Manage your plan, put it into a defect tracker, work item tracker or use notepad or excel etc. Mark off the items on your plan as and when you have attacked them, if you find more items then get them on your plan, keep the movement going and slowly the codebase will become better and better.

    Read the article

  • New Release Overview Part 1

    - by brian.harrison
    Ladies & Gentlemen, I have been getting a lot of questions over the last month or two about the next release of WCI codenamed "Neo". Unfortunately I cannot give you an exact release date which I know you all would be asking me for if we were talking face to face, but I can definitely provide you with information about some of the features that will be made available. So over the next few blog entries, I am going to provide you with details about two features and even provide you with screenshots for some of them. KD Browser Portlet This portlet will provide a windows explorer look and feel to the Knowledge Directory from with a Community Page or My Page. Not only will the portlet provide access to the folder structure and the documents within, but the user or community manager will also have the ability to modify what is being shown. From with a preferences page, the user or community manager can change what top-level folders are shown within the folder structure as well as what properties are available for each document that is shown. There are also a number of other portlet specific customizations available as well. Embedded Tagging Engine As some of you might be aware, there was a product made available just prior to the Oracle acquisition known as Pathways which gave users the ability to add tags to documents that were either in the Knowledge Directory or in the Collaboration Documents section. Although this product is no longer available separately for customers to purchase, we definitely did feel that the functionality was important and interesting enough that other customers should have access to it. The decision was made for this release to embed the original Pathways product as the Tagging Engine for WCI and Collaboration. This tagging engine will allow a user to add tags to a document as well as through the Collaboration Documents section. Once the tags are added to the Tagging Engine and associated with documents, then a user will have the ability to filter the documents when processing a search according to the Tags Cloud that will now be available on the Search Results page and this will be true no matter what kind of search is being processed. In addition to all of that, all of the Pathways portlets will also be available for users to add to their My Page.

    Read the article

  • How to port email from evolution to thunderbird?

    - by jim
    I updated ubuntu to 11.10 using the update notification. I am also switching from Xubuntu to ubuntu - gnome interface. I have been using evolution for years and would like to port the emails to thunderbird. I have looked at the similar questions with no luck and the thunderbird help on manually importing. Most of these assume that the evolution file structure is similar to the evolution file structure. When I set up thunderbird it seems to have imported the contacts from evolution (and actually removed them from evolution. However no mail got transferred. I found the evolution mail in ~/.local/share/evolution/mail/local . this has folders.db and 3 directories - cur ,tmp, and new. then there are the hidden files and directories. Each directory has three related files with extensions .cmeta, .ibex.index, and .ibex.index.data. Then all the directories had files that seem to contain the individual messages. I have not looked at rhyme or reason to the file numbering/naming scheme. is there a nice way to import these files?

    Read the article

  • T-4 Templates for ASP.NET Web Form Databound Control Friendly Logical Layers

    - by joycsharp
    I just released an open source project at codeplex, which includes a set of T-4 templates to enable you to build logical layers (i.e. DAL/BLL) with just few clicks! The logical layers implemented here are  based on Entity Framework 4.0, ASP.NET Web Form Data Bound control friendly and fully unit testable. In this open source project you will get Entity Framework 4.0 based T-4 templates for following types of logical layers: Data Access Layer: Entity Framework 4.0 provides excellent ORM data access layer. It also includes support for T-4 templates, as built-in code generation strategy in Visual Studio 2010, where we can customize default structure of data access layer based on Entity Framework. default structure of data access layer has been enhanced to get support for mock testing in Entity Framework 4.0 object model. Business Logic Layer: ASP.NET web form based data bound control friendly business logic layer, which will enable you few clicks to build data bound web applications on top of ASP.NET Web Form and Entity Framework 4.0 quickly with great support of mock testing. Download it to make your web development productive. Enjoy!

    Read the article

  • Windows 8, the biggest struggle&hellip;.

    - by Dennis Vroegop
    As always, it’s hard to be original. It’s easy to copy great stuff others have done but to think of something nice that others might have done is not trivial. The number of applications in the Windows 8 Store is growing rappidly. That was to be expected; a lot of developers already have the skills needed to build Win8 apps so all it took was some ideas. And they have ideas. Another factor that helps with the growing number of apps in the store is the availability of the project templates in Visual Studio 2012. When you start a new project you are given a ready to run sample that you can adapt to your needs. All the stuff needed to navigate through the app, to display data, to do semantic zoom, it’s all available. So what do we do? We tweak, change, adapt and modify these samples to fit our application. However, the underlying structure of the app remains the same. Somehow developers can’t seem to break free from the structure that the sample apps give you. Result: all apps looks alike. My tip for the day: take the samples and use them to learn. Don’t use them as a foundation of your app. Make you app different from those others and you’ll find you will have something special. I’m curious to see what you come up with!

    Read the article

  • How to cross-reference many character encodings with ASCII OR UTFx?

    - by Garet Claborn
    I'm working with a binary structure, the goal of which is to index the significance of specific bits for any character encoding so that we may trigger events while doing specific checks against the profile. Each character encoding scheme has an associated system record. This record's leading value will be a C++ unsigned long long binary value and signifies the length, in bits, of encoded characters. Following the length are three values, each is a bit field of that length. offset_mask - defines the occurrence of non-printable characters within the min,max of print_mask range_mask - defines the occurrence of the most popular 50% of printable characters print_mask - defines the occurrence value of printable characters The structure of profiles has changed from the op of this question. Most likely I will try to factorize or compress these values in the long-term instead of starting out with ranges after reading more. I have to write some of the core functionality for these main reasons. It has to fit into a particular event architecture we are using, Better understanding of character encoding. I'm about to need it. Integrating into non-linear design is excluding many libraries without special hooks. I'm unsure if there is a standard, cross-encoding mechanism for communicating such data already. I'm just starting to look into how chardet might do profiling as suggested by @amon. The Unicode BOM would be easily enough (for my current project) if all encodings were Unicode. Of course ideally, one would like to support all encodings, but I'm not asking about implementation - only the general case. How can these profiles be efficiently populated, to produce a set of bitmasks which we can use to match strings with common characters in multiple languages? If you have any editing suggestions please feel free, I am a lightweight when it comes to localization, which is why I'm trying to reach out to the more experienced. Any caveats you may be able to help with will be appreciated.

    Read the article

  • Understanding DeviceContext and Shaders in Direct3D/SlimDX

    - by Carson Myers
    I've been working through this tutorial about drawing triangles with SlimDX, and while it works, I've been trying to structure my program differently than in the tutorial. The tutorial just has everything in the main method, I'm trying to separate components into their own classes. But I'm not sure where certain components belong: namely, contexts and shaders. The tutorial (as it's just rendering one triangle) has one device, one swapchain, one device context and one set of shaders. intuition says that there is only one device/swapchain for one game, but with contexts I don't know. I made a Triangle class and put the vertex stuff in there. Should it also create a context? Should it load its own shaders? Or should I pass some global context and shaders to the triangle class when it is constructed? Or pass the shaders and construct a new context? I'm just getting started with 3D programming, so in addition to answering this question, if anyone knows of a tutorial or article or something about the larger-scale structure of a game, I'd be interested in seeing that as well.

    Read the article

  • emca fails with "Database instance is unavailable" though available

    - by Giri Mandalika
    The following example shows the symptoms of failure, and the exact error message. $ emca -repos create ... Password for SYSMAN user: Do you wish to continue? [yes(Y)/no(N)]: Y Nov 19, 2012 10:33:42 AM oracle.sysman.emcp.DatabaseChecks \ checkDbAvailabilityImpl WARNING: ORA-01034: ORACLE not available Nov 19, 2012 10:33:42 AM oracle.sysman.emcp.DatabaseChecks \ throwDBUnavailableException SEVERE: Database instance is unavailable. Fix the ORA error thrown and run EM Configuration Assistant again. Some of the possible reasons may be : 1) Database may not be up. 2) Database is started setting environment variable ORACLE_HOME with trailing '/'. Reset ORACLE_HOME and bounce the database. For eg. Database is started setting environment variable ORACLE_HOME=/scratch/db/ . Reset ORACLE_HOME=/scratch/db and bounce the database. Fix: Ensure that the ORACLE_HOME is pointing to the right location in $ORACLE_HOME/bin/emca file. Rather than installing from scratch, if ORACLE_HOME was copied over from another location, likely it results in wrong location for ORACLE_HOME in several Enterprise Manager (EM) specific scripts and files. It usually happens when the directory structure on the target machine is not identical to the structure on the original/source machine, including the top level directory location where Oracle RDBMS was installed properly using the installer.

    Read the article

  • #altnetseattle &ndash; CQRS

    - by GeekAgilistMercenary
    This is a topic I know nothing about, and thus, may be supremely disparate notes.  Have fun translating.  : )   . . .and coolness that the session is well past capacity. Separates things form the UI and everything that needs populated is done through commands.  The domain and reports have separate storage. Events populate these stores of data, such as "sold event". What it looks like, is that the domain controls the requests by event, which would be a product order or something similar. Event sourcing is a key element of the logic. DDD (Domain Driven Design) is part of the core basis for this methodology/structure. The architecture/methodology/structure is perfect for blade style plugin hardware as needed. Good blog entry DDDD: Why I love CQRS and another Command and Query Responsibility Segregation (CQRS), more, CQRS à la Greg Young, a bit by Udi Dahan and there are more.  Google, Bing, etc are there for a reason. It appears the core underpinning architectural element of this is the break out of unique identifiable actions, or I suppose better described as events.  Those events then act upon specific pipelines such as read requests, write requests, etc.  I will be doing more research on this topic and will have something written up shortly.  At this time it seems like nothing new, just a large architectural break out of identifiable needs of the entire enterprise system.  The reporting is in one segment of the architecture, the domain is in another, hydration broken out to interfaces, and events are executed to incur events on the Reports, or what appears by the description to be events on the domain. Anyway, more to come on this later.

    Read the article

  • How can I get the palette of an 8-bit surface in SDL.NET/Tao.SDL?

    - by lolmaster
    I'm looking to get the palette of an 8-bit surface in SDL.NET if possible, or (more than likely) using Tao.SDL. This is because I want to do palette swapping with the palette directly, instead of blitting surfaces together to replace colours like how you would do it with a 32-bit surface. I've gotten the SDL_Surface and the SDL_PixelFormat, however when I go to get the palette in the same way, I get a System.ExecutionEngineException: private Tao.Sdl.Sdl.SDL_Palette GetPalette(Surface surf) { // Get surface. Tao.Sdl.Sdl.SDL_Surface sdlSurface = (Tao.Sdl.Sdl.SDL_Surface)System.Runtime.InteropServices.Marshal.PtrToStructure(surf.Handle, typeof(Tao.Sdl.Sdl.SDL_Surface)); // Get pixel format. Tao.Sdl.Sdl.SDL_PixelFormat pixelFormat = (Tao.Sdl.Sdl.SDL_PixelFormat)System.Runtime.InteropServices.Marshal.PtrToStructure(sdlSurface.format, typeof(Tao.Sdl.Sdl.SDL_PixelFormat)); // Execution exception here. Tao.Sdl.Sdl.SDL_Palette palette = (Tao.Sdl.Sdl.SDL_Palette)System.Runtime.InteropServices.Marshal.PtrToStructure(pixelFormat.palette, typeof(Tao.Sdl.Sdl.SDL_Palette)); return palette; } When I used unsafe code to get the palette, I got a compile time error: "Cannot take the address of, get the size of, or declare a pointer to a managed type ('Tao.Sdl.Sdl.SDL_Palette')". My unsafe code to get the palette was this: unsafe { Tao.Sdl.Sdl.SDL_Palette* pal = (Tao.Sdl.Sdl.SDL_Palette*)pixelFormat.palette; } From what I've read, a managed type in this case is when a structure has some sort of reference inside it as a field. The SDL_Palette structure happens to have an array of SDL_Color's, so I'm assuming that's the reference type that is causing issues. However I'm still not sure how to work around that to get the underlying palette. So if anyone knows how to get the palette from an 8-bit surface, whether it's through safe or unsafe code, the help would be greatly appreciated.

    Read the article

  • WebCenter Spaces 11g PS2 Task Flow Customization

    - by Javier Ductor
    Previously, I wrote about Spaces Template Customization. In order to adapt Spaces to customers prototype, it was necessary to change template and skin, as well as the members task flow. In this entry, I describe how to customize this task flow.Default members portlet:Prototype Members Portlet:First thing to do, I downloaded SpacesTaskflowCustomizationApplication with its guide.This application allows developers to modify task flows in Spaces, such as Announcements, Discussions, Events, Members, etc. Before starting, some configuration is needed in jDeveloper, like changing role to 'Customization Developer' mode, although it is explained in the application guide. It is important to know that the way task flows are modified is through libraries, and they cannot be updated directly in the source code like templates, you must use the Structure panel for this. Steps to customize Members portlet:1. There are two members views: showIconicView and showListView. By default it is set to Iconic view, but in my case I preferred the View list, so I updated in table-of-members-taskflow.xml this default value.2. Change the TableOfMembers-ListView.jspx file. By editing this file, you can control the way this task flow is displayed. So I customized this list view using the structure panel to get the desired look&feel.3. After changes are made, click save all, because every time a library changes an xml file is generated with all modifications listed, and they must be saved.4. Rebuild project and deploy application.5. Open WLST command window and import this customization to MDS repository with the 'import' command.Eventually, this was the result:Other task flows can be customized in a similar way.

    Read the article

  • How do you use blank lines in your code ?

    - by Matthieu M.
    There has been a few remarks about white space already in discussion about curly braces placements. I myself tend to sprinkle my code with blank lines in an attempt to segregate things that go together in "logical" groups and hopefully make it easier for the next person to come by to read the code I just produced. In fact, I would say I structure my code like I write: I make paragraphs, no longer than a few lines (definitely shorter than 10), and try to make each paragraph self-contained. For example: in a class, I will group methods that go together, while separating them by a blank line from the next group. if I need to write a comment I'll usually put a blank line before the comment in a method, I make one paragraph per step of the process All in all, I rarely have more than 4/5 lines clustered together, meaning a very sparse code. I don't consider all this white space a waste because I actually use it to structure the code (as I use the indentation in fact), and therefore I feel it worth the screen estate it takes. For example: for (int i = 0; i < 10; ++i) { if (i % 3 == 0) continue; array[i] += 2; } I consider than the two statements have clear distinct purposes and thus deserve to be separated to make it obvious. So, how do you actually use (or not) blank lines in code ?

    Read the article

  • Tips on combining the right Art Assets with a 2D Skeleton and making it flexible

    - by DevilWithin
    I am on my first attempt to build a skeletal animation system for 2D side-scrollers, so I don't really have experience of what may appear in later stages. So i ask advice from anyone that been there and done that! My approach: I built a Tree structure, the root node is like the center-of-mass of the skeleton, allowing to apply global transformations to the skeleton. Then, i make the hierarchy of the bones, so when moving a leg, the foot also moves. (I also make a Joint, which connects two bones, for utility). I load animations to it from a simple key frame lerp, so it does smooth movement. I map the animation hierarchy to the skeleton, or a part of it, to see if the structure is alike, otherwise the animation doesnt start. I think this is pretty much a standard implementation for such a thing, even if i want to convert it to a Rag Doll on the fly.. Now to my question: Imagine a game like prototype, there is a skeleton animation of the main character, which can animate all meshes in the game that are rigged the same way.. That way the character can transform into anything without any extra code. That is pretty much what i want to do for a side-scroller, in theory it sounds easy, but I want to know if that will work well. If the different people will be decently animated when using the same skeleton-animation pair. I can see this working well with a Stickman, but what about actual humans? Will the perspective look right, or i will need to dynamically change the sprites attached to bones? What do you recommend for such a system?

    Read the article

  • Back up a single table in SQL Server

    - by BuckWoody
    SQL Server doesn’t have an easy way to take a table backup, so I often use the bcp (Bulk Copy Program) to accomplish the same goal. I’ve mentioned this before, and someone told me when they tried it they couldn’t restore the table – ah the dangers of telling people half the information! I should have mentioned that you need to have a “format file” ready if the table does not exist at the destination. In my case I already had the table, in this person’s case they did not. The format file can be used to rebuild that table structure before the data is bcp’d in, and you can read more about it here: http://msdn.microsoft.com/en-us/library/ms191516.aspx There’s another way to back up a table, and that’s to create a Filegroup and place the table there. Then you can take a Filegroup backup to back up a single table. Of course, there are other methods of moving a single table’s data in an out, including SQL Server Integration Services and even the older Data Transformation Services, or simply by using hte SQLCMD or PowerShell utilities to run a query and just save the output to a file. In fact, these days I’m using a PowerShell script to build INSERT statements from that query. That could also easily be modified to create the table structure (or modify one if needed) quite easily. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Designing a large database with multiple sources

    - by CatchingMonkey
    I have been tasked with redesigning, or at worst optimising the structure of a database for a data warehouse. Currently, the database has 4 other source databases (which is due to expand to X number of others), all of which have their own data structures, naming conventions etc. At the moment an overnight SSIS package pulls the data from the various source and then for each source coverts the data into a standardised, usable format. These tables are then appended to each other creating a 60m row, 40 column beast!. This table is then used in a variety of ways from an OLAP cube to a web front end. The structure has been in place for a very long time, and the work I have been able to prove the advantages of normalisation, and this is the way I would like to go. The problem for me is that the overnight process takes so long I don't then want to spend additional time normalising the last table into something usable. Can anyone offer any insight or ideas into the best way to restructure or optimise the database efficiently? Edit: All the databases are MS SQL Server 2008 R2 Thanks in advance CM

    Read the article

  • What is a good basic/flexible cms for a small website? [closed]

    - by Samuel
    Possible Duplicate: Which Content Management System (CMS) should I use? I'm designing a very basic portfolio website for an artist. It features a blog, portfolio, cv and contact page. I've handcoded the basics of this site in php/java, as it is a very small website (and I like coding by hand). But I need a simple cms backend for the dynamic parts of the website (the blog/portfolio). The big systems (ruby, joomla, wordpress) are far too invasive for my liking (and frankly a bit beyond my capabilities). Wordpress for example, requires too much adaptation of the design to the wordpress structure, and ruby is far too extensive for a simple site like this (in my opinion). So what I'm looking for is a (preferably open source) cms that has a simple backend for the artist to use as a blogger, with a mysql database for the content, that will allow me to insert content with simple tags (using smarty tags for example), but is otherwise not too invasive or demanding in terms of the required page structure. Does anyone know of a good cms that fits this description? p.s.: I have tried phpnews and cmsmadesimple, but phpnews was a litte too basic (but very close too what I'm looking for) and cmsmadesimple was way too slow (but otherwise also pretty close too what I wanted, though a bit too extensive).

    Read the article

  • The Workshop Technique Handbook

    - by llowitz
    The #OUM method pack contains a plethora of information, but if you browse through the activities and tasks contained in OUM, you will see very few references to workshops.  Consequently, I am often asked whether OUM supports a workshop-type approach.  In general, OUM does not prescribe the manner in which tasks should be conducted, as many factors such as culture, availability of resources, potential travel cost of attendees, can influence whether a workshop is appropriate in a given situation.  Although workshops are not typically called out in OUM, OUM encourages the project manager to group the OUM tasks in a way that makes sense for the project. OUM considers a workshop to be a technique that can be applied to any OUM task or group of tasks.  If a workshop is conducted, it is important to identify the OUM tasks that are executed during the workshop.  For example, a “Requirements Gathering Workshop” is quite likely to Gathering Business Requirements, Gathering Solution Requirements and perhaps Specifying Key Structure Definitions. Not only is a workshop approach to conducting the OUM tasks perfectly acceptable, OUM provides in-depth guidance on how to maximize the value of your workshops.  I strongly encourage you to read the “Workshop Techniques Handbook” included in the OUM Manage Focus Area under Method Resources. The Workshop Techniques Handbook provides valuable information on a variety of workshop approaches and discusses the circumstances in which each type of workshop is most affective.  Furthermore, it provides detailed information on how to structure a workshops and tips on facilitating the workshop. You will find guidance on some popular workshop techniques such as brainstorming, setting objectives, prioritizing and other more specialized techniques such as Value Chain Analysis, SWOT analysis, the Delphi Technique and much more. Workshops can and should be applied to any type of OUM project, whether that project falls within the Envision, Manage or Implementation focus areas.  If you typically employ workshops to gather information, walk through a business process, develop a roadmap or validate your understanding with the client, by all means continue utilizing them to conduct the OUM tasks during your project, but first take the time to review the Workshop Techniques Handbook to refresh your knowledge and hone your skills. 

    Read the article

  • case-specific mod rewrite on Wordpress subdomain multisite

    - by Steve
    I have split a Wordpress blog into multiple category-specific blogs using subdomains, as the topics in the original blog were too broad to be lumped together effectively. Posts were exported from the parent www blog and imported into the subject-specific subdomain blogs. I believe .htaccess provides mod rewrite for all subdomains (including the original www) in a single .htaccess file. I use .htaccess to perform 301 redirect on post categories to the relevant post on the subdomain's blog. eg: RedirectMatch 301 ^/auto/(.*)$ http://auto.example.com/$1 The problem I have is that the category has been retained in the permalink structure in the subdomain blog, so that www.example.com/auto/mercedes is now auto.example.com/auto/mercedes. The 1st URL is redirect to the 2nd, but unfortunately, the 2nd URL is redirected to auto.example.com/mercedes using the same rewrite rule, which is not found, as the permalink on the subdomain's blog retains the parent category of auto. The solution would be to adjust the permalink structure in the subdomain's WP settings, so that the top level category does not duplicate the subdomain. My question would be: how do I then strip a section of the original (www) blog's post URL from the subdomain's URL when redirecting? eg: How do I redirect www.example.com/auto/mercedes to auto.example.com/mercedes? I'm assuming this would be a regular expression trick, which I am not great at. Update: I might have to use: RewriteCond %{HTTP_HOST} !auto.example.com$ in the default Wordpress if loop in .htaccess, and seperate my custom subdomain redirections into a second if loop section.

    Read the article

  • WCF/webservice architecture question

    - by M.R.
    I have a requirement to create a webservice to expose certain items from a CMS as a web service, and I need some suggestions - the structure of the items is as such: item - field 1 - field 2 - field 3 - field 4 So, one would think that the class for this will be: public class MyItem { public string ItemName { get; set; } public List<MyField> Fields { get; set; } } public class MyField { public string FieldName { get; set; } public string FieldValue { get; set; } //they are always string (except - see below) } This works for when its always one level deep, but sometimes, one of the fields is actually a point to ANOTHER item (MyItem) or multiple MyItem (List<MyItem>), so I thought I would change the structure of MyField as follows, to make FieldValue as object; public class MyField { public string FieldName { get; set; } public object FieldValue { get; set; } //changed to object } So, now, I can put whatever I want in there. This is great in theory, but how will clients consume this? I suspect that when users make a reference to this web service, they won't know which object is being returned in that field? This seems like a not-so-good design. Is there a better approach to this?

    Read the article

  • Pathfinding and BSP with Box2D

    - by Amplify91
    I'm looking into implementing AI in my 2D side-scrolling platformer, and I'm looking into using algorithms such as A*. For many kinds of pathfinding, we need some sort of grid or systems of nodes or polygon areas. My problem is that I am using Box2d for physics and I am not sure how best to create a structure that my AI can use besides placing individual nodes manually (something I really want to avoid) and using some sort of steering behavior. My level design is tile-based with each tile being about half of the height/width of my main character. The tiles are not all square (some are sloped). I'd like to have a system that can see what the terrain looks like for pathfinding and also keep track of the positions of other actors such as enemies. I'd like to avoid directly placing any nodes into my level design except for possible endpoints or goals. This question is related: How do you do AI path following within a 2d physics engine like farseer/box2d?, but it doesn't specify what kind of structure I could use instead of a list of nodes. I'm looking for some kind of grid or type of BSP that I can query for algorithms like A*.

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >