Search Results

Search found 4343 results on 174 pages for 'verizon wireless'.

Page 67/174 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• Putting Ubuntu Server on to a networked HDD

  - by SimplySimon

  Firstly, I know very little about servers and secondly the 1Tb HDD I have has network capabilities, but no software is installed on it, so when connected to the computer it is seen as a network connection, but not as a drive. Any advice on how to get started would be great. Up until now, I have been using it as a USB drive which worked well, but when this is sorted, I would like it to be connected directly to our BT HomeHub accessible through the WiFi for all the family to use as a film and back up repository. I would then be able to set up individual accounts for each family member to use and may be, if possible, make it accessible from outside locations. The First question then is: How can I install Ubuntu server on the 1Tb HDD attached directly to the computers network port but which doesn't show up in Nautilus? HDD Western Digital 1.0Tb LBA 1953525168 Model: WD10EACS-00DB0 DCM: DHRNHT2CF

  Read the article

• Wifi won't connect to certain networks

  - by Dave M G

  As I write this, I'm in a coffee shop on my laptop, and I am trying to connect to the free wifi network they offer. Every time I select their network from the wifi applet drop down menu, it connects for a second and then disconnects. At the same time, I have my Android phone with me, and it connects to the coffee shop's network without problem. There are a couple of people around me also using the same network with no issues. I asked the staff to check and as far as they can tell there is no problem with their router or anything. I have tried rebooting, but it has not made a difference. I have double and triple checked that I am using the correct WEP password. As an added wrinkle, when I connect to another network, it seems to connect (although I can't use them because they are paid gateway services). So I'm able to ask this question now because I have tethered my laptop to my phone, but it's slow and a workaround, not a solution. All indications are that it's a problem with my computer against this one network. Why would that be and how can I fix it?

  Read the article

• Ubuntu 12.10 WiFi Problems

  - by Sean Webber

  I have a 32 bit machine running Ubuntu 12.10 with WiFi on it. I have a WPA2 network at home, but if I leave the USB Adapter plugged in while it boots, it infinitely keeps asking for the network password but never connects. If I plug it in after boot, it will connect but then I can't access ANYTHING on the LAN or Internet because "the DNS servers are unreachable". Now, if I leave the computer on a while, I get lucky sometimes and it MAGICALLY decides to connect for a little bit, lock the machine though and the Internet's gone again. The weirdest thing, is when I am connected but can't get to the internet, I do a netstat or ifconfig wlan0, I do have an IP address and everything. It says I'm connected but its not. I have a Realtek RTL8188CU USB adapter.

  Read the article

• Need in obtaining a specific local telephone number [closed]

  - by Brett

  I am wanting a local phone number that I like. I have found one that I like. When I call the number that I want it says "this number has not been allocated" I have looked up and found the company that owns that number. How do I go about acquiring that number from the company. I spoke with someone who sells major phone packages and he said that if I signed up with them he could get the number for me. He said that there is a change of ownership form that the send to get the number. So I know it can be done. I am hoping that someone with industry specific knowledge in this area can guide me in getting this number.

  Read the article

• Wifi stops working in 13.10

  - by Vitor

  OK, my wifi is connecting fine, but it just stop downloading and uploading data. The skype stops, trying to reconnect, the firefox nighly and the google chromium stops loading pages and websites, everythings stops. But when I see the network icon: connected to my wifi. Then, I simply reconnect, or disconnect and connect again. Reconnecting, the wifi starts working again, the skype icon turns green, the browsers work again. Previously, I had 13.04 and never had this problem. When I upgraded to Ubuntu 13.10, the wifi started to do this. And the wifi has this problem since the early times of 13.10; since I installed 13.10, the wifi is having this issue (from the first day I installed it). Anyone having the same problem? Anyone knows how to fix it?

  Read the article

• Can't connect to windows 7 ad-hoc network

  - by Nikolaj

  Good day! I have installed ubuntu 12.04 on my laptop and I need to have network connection on it. Have a desktop PC, where I've created ad-hoc wi-fi network(Windows 7) and can't connect to it. So, problem: I see my network in the list of networks to connect, but I cant connect to it because it's grey color and not active(can't click on it). Could somebody help me to solve that problem? Thanks in advance!

  Read the article

• How to connect MTS MBlaze

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

• Is it possible to configure Apple's Magic Mouse to be recognised on start up?

  - by Dave

  This question may apply more roundly to all bluetooth mice but in my case I am dealing with an Apple Magic Mouse. I have followed the set up instructions here; https://wiki.ubuntu.com/Multitouch/AppleMagicMouse closely. I have even removed the mouse and started from scratch more than once repeating each step described carefully. Every time the computer is started it does not see the Magic Mouse by default. I need to keep a wired mouse connected to the computer at all times which I use to log in with then connect the Magic Mouse, in a somewhat counter-intuitive exercise! Any help would be greatly appreciated.

  Read the article

• 3G dongle and memory card detection

  - by user212632

  My questions is about 3G dongle (Huawei E1752) that I use for my internet on Ubuntu 12.04. The big issue is that ubuntu only recognise the dongle if I plug it in before booting up. But if somehow I loses connection (due to network being low) then the only way to use the 3G dongle again is to reboot my machine, which becomes a pain. I have the same issue with the memory card reader of my laptop whereby it only reads when I insert the card before booting up. My laptop is an Acer V3 -571g. At first I thought it was an issue that the model was quite new, but I have been updating my ubuntu for a while, and this issue has kept being the same

  Read the article

• WiFi, No ping, other works fine

  - by Linux Mom

  I installed Ubuntu 12.04 LTS for my mom, this runs OK. However recently, I switched back and forth between encryptions on our WiFi Router from WPA-PSK to WEP and back again to WPA-PSK, same password. Now this old laptop won't even ping the gateway on the router, although the nm-applet shows connected. I tried re-adding the network and putting in the BSSID. I did this over again sometimes just to verify. I tried with my 3G Tethering on my phone, it works fine, can go online too. My other Linux laptop can go on the same wifi as well as my phone. And this laptop used to been online on the same network, same password, same encryption (WPA-PSK) What can be wrong ? Does it need a serious kick in the butt or removing some cached authorisation somewhere?

  Read the article

• Installing driver for Ralink Realtek 8187 WiFi adapter

  - by capcom

  I purchased a WiFi adapter online, and it came with an installation CD with drivers. I installed it just fine on Windows, and am now trying on Ubuntu 10.10. The CD came with the driver files for Linux as well, but I have no idea why they aren't working - my guess is that I don't properly understand what to do with them. I have uploaded the contents of the folder which came with the CD here. There is a README in there, but the instructions under the installation header didn't get me anywhere unfortunately. The Device ID is: Bus 001 Device 002: ID 148f:5370 Ralink Technology, Corp. Thanks.

  Read the article

• huwai 1731 ( mobile broadband ) not working with dell inspiron 3521

  - by N.Ramkumar

  Please help, one of my friend shared this note ( enclosed below), I used these codes and my laptop is able open the data card but I am not getting any signals. I am able to work with wired connection, but wi-fi and mobile broad band are not working. Please help. sudo apt-get purge usb-modeswitch sudo apt-get update sudo spt-get install usb-modeswitch sudo apt-get update gksudo gedit /lib/udev/rules.d/40-usb_modeswitch.rules Once you enter these above commands 40-usb_modeswitch.rules text file will open. Then, copy below mentioned lines into 40-usb_modeswitch.rules text file. #Huawei E1731 ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1446", RUN+="usb_modeswitch '%b/%k'" Save the file Then type : sudo apt-get update Then restart the machine.

  Read the article

• wifi works only after connecting through wire

  - by orustam

  I have fresh installed ubuntu 12.04. it is my first ubuntu installation and i'm a bit confused about the network connection. Wifi shows up and connects(at least it shows that the connection is established), but i can't open any pages, i've tried to ping some sites and it fails either. If i try to connect through a wire it works, what is interesting to me is that after i used my wire connection i can use my wifi properly without a wire pluged in. i think it probably has to do with my settings? I tried to find a solution but can figure it out on my own. My Proxy set to none(have applied it system wide) Please help me if you have any clue:)

  Read the article

• Transfer a ssh session between the same physical devices from one network to another

  - by Vivek V K

  My server has 2 IP addresses via two networks. Due to some restrictions,my client will be able to access only one of the network at a time. Hence, I want a way to transfer a live ssh session with all the open applications seamlessly from one network to another. The physical devices (client and the server) are the same. What changes is the network through which it connects. can this be done? Thanks!

  Read the article

• ERROR while getting interface

  - by user284391

  I have installed the latest version of aircrack-ng, but when i run this code, sudo airmon-ng start wlan0 I get this. sudo airmon-ng start wlan0 Found 4 processes that could cause trouble. If airodump-ng, aireplay-ng or airtun-ng stops working after a short period of time, you may want to kill (some of) them! -e PID Name 463 avahi-daemon 475 avahi-daemon 683 NetworkManager 756 wpa_supplicant Interface Chipset Driver wlan0 Broadcom wl - [phy0]mon0: ERROR while getting interface flags: No such device (monitor mode enabled on mon0) Is there anyone who could help me get this problem solved please.

  Read the article

• Installing 12.04 through Update Manager on a XP/ubuntu dual-boot

  - by Madeline Mcormick

  I currently have a dual-boot system running XP Pro SP3 with Ubuntu 10.04 LTS. I decided to upgrade to 12.04 using the Update Manager from the network and NOT using ISO CD version. Now that I am in the middle of 12.04 installation, I have this immense fear that this upgrade from update manager on the network server may affect my Win XP OS and may render it un-bootable. I tried backing up files while its upgrading to Ubuntu but it does not recognize any external media like external HDD. What should I do?

  Read the article

• Connected to Access Point but no internet connection?

  - by ReaZem

  I am trying to use my school's WPA Enterprise network to access the internet with my Three-OS laptop. I currently have Windows7, Ubuntu11.10 and Backtrack5 installed. I can use my home's WPA2 network without any issues with the 3 OS. I can successfully connect to my school's network with the 3 OS but I can only browse the internet with windows7. Ubuntu network-manager and Backtrack WICD both say that I am connected to the Acces Point but I cannot browse the internet. I have tried uninstalling network-manager and installing WICD but it did not solve the problem. Every time I connect to the Access Point, I am able to browse the internet for about 10 seconds. I have tried disabling IPV6 I have tried changing DNS.

  Read the article

• Connect to wifi ubuntu 14.04 (new ubuntu user)

  - by user289168

  I have recently changed my operating system from windows 8 to ubuntu 14.04, when trying to connect to the network via wifi the system just keeps asking for my password over and over without connecting. The connectivity through an Ethernet cable is perfectly fine however and my wifi worked fine through windows 8, I have very little ubuntu knowledge so i apologise if the right information is not shown in this question. Just wondering if there was any known problems or if anyone has seen this before? Thanks in advance for any help, Tom

  Read the article

• Wi-Fi connections gets Idle

  - by marcocamejo

  I am having this terrible problem. I have read a lot of people getting disconnected from the Network, it is not my case, I don't get disconnected, the connection just gets "idle" most of the time. It only works for short periods of time (seconds, a couple of minutes at most), then gets dead, then works again, and so on. It is annoying. I am using Ubuntu 11.10 on a Dell M5030 laptop. I have Windows 7 installed too, and of course with it, the wifi works perfectly. Any idea? advice?

  Read the article

• My internet goes down after a while

  - by Rafa Mena

  The problem is that the internet goes down after a while, i can connect perfectly when i first turn on my netbook but after a while it disconects and keeps trying to reconect but never gets it. now, im completely new in ubuntu, y merely know a few commands for the terminal and im not sure what info do you need from me to help... all i know is that the Wi-Fi is failind on ubuntu but not in windows 7 (in the sane netbook)

  Read the article

• Defaulting internet requests to wlan0 when also connected to eth0

  - by Dudemcman

  I am trying to configure an Ubuntu 10.04 desktop edition as a server. I currently have the DHCP server working through eth0. My problem is that I only have one Ethernet port, and am receiving Internet though a mobile hotspot on my phone through wlan0, and whenever I attempt to connect through wlan0 and eth0 I am unable to access the Internet through the server or the clients. When I disconnect from eth0 I then regain access. I have searched extensively for a solution, and have come up short. Any help is appreciated.

  Read the article

• Dell Vostro 1520 wifi not working with Ubuntu 12.04

  - by user65696

  I have installed Ubuntu 12.04 on Dell Vostro 1520 Laptop. But found Wifi is hardware locked, though wifi is working perfectly fine with Windows 7 in the same laptop. I tried to upgrade the drivers as mentioned in other posts/forums but could not resolve the issue. I had the similar problem with versions 11.* as well. Last time the Wifi worked with 10.* version. Please help me to get it resolved.

  Read the article

• WiFi is painfully slow, sometimes stops altogether

  - by Zelda64fan

  Lately my WiFi connection has been quite slow, and sometimes I lose my internet connection altogether (but the computer does not actually disconnect from the WiFi network). This only affects my laptop and only when it's running Ubuntu, so I think it must be a problem with Ubuntu. I haven't changed anything recently; this is on 12.10 64-bit. What could it be? Update: It's doing this now. The connection isn't completely dead, it's just staying under 5 kB/s. Still frustrating though. It also seems to affect all users.

  Read the article

• possible missing firmware

  - by pdd

  the other day i removed my linux-firmware package by mistake, i tried reinstalling it but i get this error: E: /var/cache/apt/archives/linux-firmware_1.60_all.deb: trying to overwrite '/lib/firmware/rt73.bin', which is also in package firmware-ralink 0.14+lenny2 the code from the terminal is: (Reading database ... 235747 files and directories currently installed.) Unpacking linux-firmware (from .../linux-firmware_1.60_all.deb) ... dpkg: error processing /var/cache/apt/archives/linux-firmware_1.60_all.deb (--unpack): trying to overwrite '/lib/firmware/rt73.bin', which is also in package firmware-ralink 0.14+lenny2 No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/linux-firmware_1.60_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover:

  Read the article

• 13.10 Desktop - Stop Suspension on Lid Closure

  - by bpmitche

  I'm having a problem with power management settings on my ASUS K52-F Laptop. Upgraded from 13.04 to 13.10 earlier today; closing the laptop lid puts the laptop into suspension (even on AC Power - tried fixing it in gnome power settings, tried fixing it in Cinnamon power settings, tried changing it in DCONF-Editor, but no matter where I change the setting the laptop lid still suspends). After resuming from suspend, I restore to the gnome window/login manager (instead of Cinnamon login manager). Wifi doesn't reconnect, but the icon in Cinnamon shows that I'm connected. IFCONFIG shows that the interface is up and working normally, but still not reconnecting. ifconfig wlan0 down / up doesn't change anything. Any help would be greatly appreciated.

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >