Search Results

Search found 57848 results on 2314 pages for 'windows vista sp2'.

Page 67/2314 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • Program broke my windows. Everything randomly minimizes even after multiple restarts

    - by Xitcod13
    I just installed LoL (league of legends) on my computer. The problem is that almost every time after I play the game, it minimizes all my windows which is really annoying. What is worse however is that afterwards other programs do this as well. In the internet browser doesn't minimize but it does loose focus. For example when i type it randomly looses focus and i have to click on the browser window again to it registers my typing. Is there any way to fix this? What can cause such a strange behavior?? In addition this problem persists even after restarting my computer. I previously thought it was internet driver. I no longer think so this happened right after I started playing the game and seems pretty persistent. Please read the comments for further information. This pretty much renders my computer useless. Even typing this takes a huge effort.

    Read the article

  • Restoring Mac-bootcamp-windows-partition image to Windows machine

    - by jpwagner
    Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

    Read the article

  • Restoring Mac-bootcamp-windows-partition image to Windows machine

    - by jpwagner
    Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

    Read the article

  • windows xp mode for windows 7 - save text input language settings

    - by Gero
    When I change the 'default language' in 'text services and input languages' in windows xp mode from EN-US to DE-DE the settings are reverted with the next logoff / reboot - EN-US is the default language again. Is there a way around this behaviour? I'm using the default 'XPMUser' in windows xp mode. I also checked 'turn off advanced text services' and disabled the language bar and windows xp remembers these settings - just not the default language..

    Read the article

  • SCCM SP2 - OOB Management Certificates Problems

    - by Achinoam
    I have a vPro client computer with AMT 4.0. It was importeed successfully via the Import OOB Computers wizard, and after sending a "Hello- packet" it became provisioned. (The SCCM GUI displays AMT Status: Provisioned). But when I try to perform power operations on this machine, they always fail with the following lines in the log: AMT Operation Worker: Wakes up to process instruction files 7/29/2009 10:59:29 AM 2176 (0x0880) AMT Operation Worker: Wait 20 seconds... 7/29/2009 10:59:29 AM 2176 (0x0880) Auto-worker Thread Pool: Work thread 3884 started 7/29/2009 10:59:29 AM 3884 (0x0F2C) session params : https:/ / amt4.domaindemo.com:16993 , 11001 7/29/2009 10:59:29 AM 3884 (0x0F2C) ERROR: Invoke(invoke) failed: 80020009argNum = 0 7/29/2009 10:59:31 AM 3884 (0x0F2C) Description: A security error occurred 7/29/2009 10:59:31 AM 3884 (0x0F2C) Error: Failed to Invoke CIM_BootConfigSetting::ChangeBootOrder_INPUT action. 7/29/2009 10:59:31 AM 3884 (0x0F2C) AMT Operation Worker: AMT machine amt4.domaindemo.com can't be waken up. Error code: 0x80072F8F 7/29/2009 10:59:31 AM 3884 (0x0F2C) Auto-worker Thread Pool: Warning, Failed to run task this time. Will retry(1) it 7/29/2009 10:59:31 AM 3884 (0x0F2C) After investigation, I've seen that the problem occurs already on the 2nd stage of the provisioning: Start 2nd stage provision on AMT device amt4.domaindemo.com. 8/2/2009 4:55:12 PM 2944 (0x0B80) session params : https: / / amt4.domaindemo.com:16993 , 11001 8/2/2009 4:55:12 PM 2944 (0x0B80) Delete existing ACLs... 8/2/2009 4:55:12 PM 2944 (0x0B80) ERROR: Invoke(invoke) failed: 80020009argNum = 0 8/2/2009 4:55:14 PM 2944 (0x0B80) Description: A security error occurred 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Cannot Enumerate User Acl Entries. 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: CSMSAMTProvTask::StartProvision Fail to call AMTWSManUtilities::DeleteACLs 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Can not finish WSMAN call with target device. 1. Check if there is a winhttp proxy to block connection. 2. Service point is trying to establish connection with wireless IP address of AMT firmware but wireless management has NOT enabled yet. AMT firmware doesn't support provision through wireless connection. 3. For greater than 3.x AMT, there is a known issue in AMT firmware that WSMAN will fail with FQDN longer than 44 bytes. (MachineId = 17) 8/2/2009 4:55:14 PM 2944 (0x0B80) STATMSG: ID=7208 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=JE-DEV-MS0 SITE=JR1 PID=1756 TID=2944 GMTDATE=Sun Aug 02 14:55:14.281 2009 ISTR0="amt4.domaindemo.com" ISTR1="amt4.domaindemo.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 8/2/2009 4:55:14 PM 2944 (0x0B80) This error is consistent with all the other 2nd stage provisioning tasks. (Add ACLs, Enable Web UI, etc.) I've opened the certification authority, and I see that the certificates were issued to the SCCM Site server instead of the AMT client! What could be the reason for this failure? What is the problematic definition for the certificate? Thank you in advance!!!

    Read the article

  • SCCM SP2 - OOB Management Certificates Problems

    - by Achinoam
    Hi experts, I have a vPro client computer with AMT 4.0. It was importeed successfully via the Import OOB Computers wizard, and after sending a "Hello- packet" it became provisioned. (The SCCM GUI displays AMT Status: Provisioned). But when I try to perform power operations on this machine, they always fail with the following lines in the log: AMT Operation Worker: Wakes up to process instruction files 7/29/2009 10:59:29 AM 2176 (0x0880) AMT Operation Worker: Wait 20 seconds... 7/29/2009 10:59:29 AM 2176 (0x0880) Auto-worker Thread Pool: Work thread 3884 started 7/29/2009 10:59:29 AM 3884 (0x0F2C) session params : https:/ / amt4.domaindemo.com:16993 , 11001 7/29/2009 10:59:29 AM 3884 (0x0F2C) ERROR: Invoke(invoke) failed: 80020009argNum = 0 7/29/2009 10:59:31 AM 3884 (0x0F2C) Description: A security error occurred 7/29/2009 10:59:31 AM 3884 (0x0F2C) Error: Failed to Invoke CIM_BootConfigSetting::ChangeBootOrder_INPUT action. 7/29/2009 10:59:31 AM 3884 (0x0F2C) AMT Operation Worker: AMT machine amt4.domaindemo.com can't be waken up. Error code: 0x80072F8F 7/29/2009 10:59:31 AM 3884 (0x0F2C) Auto-worker Thread Pool: Warning, Failed to run task this time. Will retry(1) it 7/29/2009 10:59:31 AM 3884 (0x0F2C) After investigation, I've seen that the problem occurs already on the 2nd stage of the provisioning: Start 2nd stage provision on AMT device amt4.domaindemo.com. 8/2/2009 4:55:12 PM 2944 (0x0B80) session params : https: / / amt4.domaindemo.com:16993 , 11001 8/2/2009 4:55:12 PM 2944 (0x0B80) Delete existing ACLs... 8/2/2009 4:55:12 PM 2944 (0x0B80) ERROR: Invoke(invoke) failed: 80020009argNum = 0 8/2/2009 4:55:14 PM 2944 (0x0B80) Description: A security error occurred 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Cannot Enumerate User Acl Entries. 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: CSMSAMTProvTask::StartProvision Fail to call AMTWSManUtilities::DeleteACLs 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Can not finish WSMAN call with target device. 1. Check if there is a winhttp proxy to block connection. 2. Service point is trying to establish connection with wireless IP address of AMT firmware but wireless management has NOT enabled yet. AMT firmware doesn't support provision through wireless connection. 3. For greater than 3.x AMT, there is a known issue in AMT firmware that WSMAN will fail with FQDN longer than 44 bytes. (MachineId = 17) 8/2/2009 4:55:14 PM 2944 (0x0B80) STATMSG: ID=7208 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=JE-DEV-MS0 SITE=JR1 PID=1756 TID=2944 GMTDATE=Sun Aug 02 14:55:14.281 2009 ISTR0="amt4.domaindemo.com" ISTR1="amt4.domaindemo.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 8/2/2009 4:55:14 PM 2944 (0x0B80) This error is consistent with all the other 2nd stage provisioning tasks. (Add ACLs, Enable Web UI, etc.) I've opened the certification authority, and I see that the certificates were issued to the SCCM Site server instead of the AMT client! What could be the reason for this failure? What is the problematic definition for the certificate? Thank you in advance!!!

    Read the article

  • XP Mode under Win 7 Professional: Windows Activation Update failure despite activated Windows

    - by Cristina
    I am trying to install Windows XP Mode from here: http://www.microsoft.com/windows/virtual-pc/download.aspx (the Hardware-Assisted Virtualization Detection Tool has given me the green for proceeding) Even though my Windows has been activated a year or so ago, the download button leads me to a splash screen saying "Windows validation required". I am next forced to download a WindowsActivationUpdate.exe which, after downloading some mysterious "update", fails with the error message "Update installation failed, error information 0x80070002" (rough translation from German). I've tried running it both normally and as Administrator. What could be the problem?

    Read the article

  • Media center consumes all available memory when attempting to play music off of a server

    - by RCIX
    I have Windows 7 Ultimate, and recently, when i try to play a song off of my Twonky Media Server/Windows Media Connect (based on an HP WHS with an Atom), it plays choppily. When i open Resource Monitor, it shows that after ordering the music to play, memory usage rapidly spikes to consume most, if not all, of the available memory on my system (excluding a couple hundred megabytes in standby). Why does it do this and is there anything i can do to stop it? Edit: it happens when I attempt to browse the server's music, not just when i play music. Edit 2: the "ehshell" process is what consumes the memory, appears to me something specific to media center. Moreover, the ehshell process doesn't die in this case. Edit 3: It only happens when browsing my Twonky library, and not my Windows Media Connect.

    Read the article

  • How to install Ubuntu, Windows XP and Windows 7 from scratch as triple-boot system

    - by simon
    I'm currently running Windows XP, but have ordered Windows 7. I want to keep Windows XP on a separate partition, and install Ubuntu as well. In which order should I install the OSs, and is there anything differing from an ordinary single-system install I should keep in mind? For example, does the order of partition make any difference? If I want to have the system drive as "C:" drive in both Win XP and Win 7, what should I do?

    Read the article

  • Color Calibrate Dual Monitor XP SP2

    - by Laramie
    This topic has been touched on before but not really answered. I have a dual monitor system and the colors differ wildly. I currently live Buenos Aires where color correction hardware costs premium prices. I do some graphic design, but don't require a pro-level calibration. That said, I'd like my monitors to be set as close to "true color" as possible. I've located the useful and free Monitor Calibration Wizard, but it seems to adjust the entire system internally at startup. I could use the Microsoft Color Control Panel Applet to set a different ICC or ICM profile for each monitor, but the Monitor Calibration Wizard outputs its own format for profiles.

    Read the article

  • Moving users folder on Windows Vista/Seven to another partition

    - by Click Ok
    When I format the computer and reinstall Windows, my first step is move the "my documents" folder to another partition. In Windows XP it wasn't enough because the desktop folder and another user folders was in the primary partition. Now in Windows Seven and Vista we can use HardLinks to "move" the folder to another partition and Windows and another programs will think that the data is in the primary parition. What the fastest and secure steps to move the Users folder to another partition and to create the hardlinks correctly? Thank you very much!

    Read the article

  • AHCI, Windows 7 and can only boot with Windows DVD present

    - by Rob Pridham
    Foolishly, I installed Windows 7 with my new SSD set to IDE. I would like to change it to AHCI. I have done this before, with a different motherboard. What happens: I set the controller to AHCI in the BIOS; I also check correct boot order On boot, I get the 'BOOTMGR not found' error I use the Windows Recovery Console on the DVD Diskpart etc can see the disks, and bootrec claims to have rewritten the MBR/bootloader I reboot, same problem Recovery Console again and it detects a problem, fixes, reboots Recovery Console again and it detects the OS, and a problem - fixes, reboots I ignore the 'press any key to boot from DVD' prompt Windows boots fine I restart without the DVD and I'm back to square one That optional 'press a key to boot from DVD' stage is something that the recovery process introduces - normally you have to choose to boot to the DVD at the BIOS stage. You also see this when installing Windows. I suspect that whatever temporary state that is is compatible with AHCI - but not the standard it returns to. I have done the msahci/iaStorV registry hacks to no avail (this worked with the previous board). I can put it back to IDE where normal service is resumed. The board is an Asus M5A99X, the southbridge is AMD SB950, and this is Windows 7 x64. I would quite like not to have to reinstall it again. Any ideas as to what I can do as a permanent fix?

    Read the article

  • "System volume folder" always appearing in USB storage stick

    - by ?????? Oyewole
    Whenever I move or copy video files from the PC (Windows 8.1) to my USB storage device and plug it into my TV, I always see a system volume folder on the USB device. This folder can be seen on the PC also, if I choose "view protected system files". My flash drive is formatted with a FAT32 file system. The question is, why is this happening on Windows 8.1, since I never had this problem on Windows 8 before upgrading, and how can I disable this feature?    OK, that's two questions.

    Read the article

  • Windows 7 - Windows 8 dual boot installation error

    - by Nikhil
    I am trying to dual boot Windows 8 with Windows 7 . But I keep getting an error while selecting the drive to install on . The error is ""Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information." " . What might be the problem ? Also previously I tried to install only Windows 7 on my HDD . I downloaded the ISO from digital river . Made bootable usb . I got the same above error . But when I tried to install it via other usb which had pirated Windows 7 downloaded from torrents it gave no error . My system config is Motherboard - Gigabyte G41 MT S2P HDD - 160 GB SATA RAM - 8 GB Help !!!

    Read the article

  • Restoring Mac-bootcamp-windows-partition image to Windows machine

    - by jpwagner
    Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

    Read the article

  • changing permissions for a network share takes longer on win2008 than on win2003, why is that?

    - by HugoRune
    Given a network share accessible for "everyone" in the domain, containing several 1000 files and folders When I change permissions for this share from read/write to only read (or vice versa) on windows 2003, the change takes effect instantly. When I do the same on a share on Windows 2008, the dialog stays open for a long time before closing when I click on OK, and the server appears to be accessing a lot of files. What is the reason for this delay? Does Windows 2008 also change ntfs permissions for all files inside the share? If so, why doesn't win2003 have to do that? I do not mind the delay, after all I do not have to change this stuff very often, but I am curious. What are the differences between 2003 and 2008 in this regard?

    Read the article

  • Proper upgrade path for Windows 7 to Windows 8 when the directory setup is non-standard

    - by Joey
    I have both a HDD and a SSD in my computer and after installing Windows I moved things around a little to ensure that the OS is on the SSD but my user profile resides on the SSD (with a few exceptions). I used junction points heavily for that. Windows and most applications are fine with that and it works well. Now I wonder whether I can in-place upgrade this to Windows 8 while retaining that exact setup or whether there is anything I can do to ease the upgrade process.

    Read the article

  • Adding a W2008 Authenticating Server to existing W2003 Domain?

    - by spelk
    I have an existing W2003 Domain, simple setup with one DC and a SQL Server (approx 100 users). There are issues with Windows 7 Clients and login scripts and we're now seeing much greater numbers of Windows 7 users turning up as they upgrade their PC/Laptops. What I want to do, is add another Server with W2008 on it, and authenticate the Windows 7 Clients - but leave the W2003 server running as is - to prevent disruption to the network and the existing WinXP users. Is it possible? Any advice as to how do this, without major disruption to the W2003 network?

    Read the article

  • Dual boot windows 8 pro and windows 7 on XPS 8500 Special additon

    - by Jesse
    I am trying to install a dual boot with windows 7 premium and windows 8 Pro on an XPS 8500 special edition. I created a new primary partition on my C: drive, inserted the windows 8 install disk, and rebooted my computer from DVD. I select custom install and the dialog box saying where do you want to install windows at? pops up but none of my drives are listed. Please help me determine what is going on? I don't understand why none of my drives are showing up on this menu. Not even the original drive. When I go to load driver and click on the partition I created it tells me "No signed device drivers were found. Make sure the installation media contains the correct drivers, and then click OK."

    Read the article

  • Ensure a process is running on a remote computer

    - by awilinsk
    We have about ten client computers ranging from Windows XP to Windows 7 that have a little program that runs in the tray. This program needs to be running at all times and sometimes it either crashes or a user exits the program. We would like to be able to check every hour or so to see if this program is running. If it is not running, it should be started. I have tried using powershell on one of our servers to get the process from a remote computer and if it doesn't find it, to start it. But, that fails because it cannot start the process as an interactive user. I tried setting up a task in task scheduler, but Windows XP task scheduler is not very good or configurable. We would like this to be as easy to administer as possible. What would be the best way to do this?

    Read the article

  • Trying to reinstalling .net framework 4 on windows server 2003 SP2

    - by LBR
    I had a problem with an application that was using .net framework 4. So I tried to fix the installation but it didn't solved. So I proceed to uninstall the framework and install it again. But then the problems started... the setup just wouldn't finish to download the framework. So i tried the full installer, and then it got stuck (freezes) at "installing client profile"... The server works well but the installation progress bar just stays at the same place (but the "wheel" keeps turning, like it was doing something, but stays like this for hours...) I tried the .net clean unistall software but the problem remains. I'm all out of ideas... I've searched the web but couldn't solve the problem with any solution I found... Any ideas on how to force the installation?

    Read the article

  • Using MSADO15.DLL and C++ with MinGW/GCC on Windows Vista

    - by Eugen Mihailescu
    INTRODUCTION Hi, I am very new to C++, is my 1st statement. I have started initially with VC++ 2008 Express, I've notice that GCC becomes kind of standard so I am trying to make the right steps event from the beginning. I have written a piece of code that connects to MSSQL Server via ADO, on VC++ it's working like a charm by importing MSADO15.dll: #import "msado15.dll" no_namespace rename("EOF", "EndOfFile") Because I am going to move from VC++ I was looking for an alternative (eventually multi-platform) IDE, so I stick (for this time) with Code::Block (I'm using last nightly buil, SVN 6181). As compiler I choose to use GCC 3.4.5 (ported via MinGW 5.1.6), under Vista. I was trying to compile a simple "hello world" application with GCC that use/import the same msado15.dll (#import "c:\Program Files\Common Files\System\ADO\msado15.dll" no_namespace rename("EOF", "EndOfFile")) and I was surprised to see a lot of compile-time errors. I was expected that the #import compiler's directive will generate a library from "msado15.dll" so it can link to it later (link-edit time or whatever). Instead it was trying to read it as a normal file (like a header file,if you like) because it was trying to interprete each line in the DLL (which has a MZ signature): Example: Compiling: main.cpp E:\MyPath\main.cpp:2:64: warning: extra tokens at end of #import directive In file included from E:\MyPath\main.cpp:2: c:\Program Files\Common Files\System\ADO\msado15.dll:1: error: stray '\144' in program In file included from E:\MyPath\main.cpp:2: c:\Program Files\Common Files\System\ADO\msado15.dll:1:4: warning: null character(s) ignored c:\Program Files\Common Files\System\ADO\msado15.dll:1: error: stray '\3' in program c:\Program Files\Common Files\System\ADO\msado15.dll:1:6: warning: null character(s) ignored c:\Program Files\Common Files\System\ADO\msado15.dll:1: error: stray '\4' in program ... and so on. MY QUESTION Well, it is obvious that under this version of GCC the #import directive does not do the expected job (perhaps #import is not supported anymore by GCC), so finally my question: how to use the ADO to access MSSQL database on a C++ program compiled with GCC (v3.4.5)?

    Read the article

  • Windows Azure Virtual Machine Test Drive Kit

    - by Clint Edmonson
    The public preview of hosted Virtual Machines in Windows Azure is now available to the general public. This platform preview enables you to evaluate our new IaaS and Enterprise Networking capabilities. Once you have registered for the 90 Day Free Trial and created a new account, you can access the preview directly at this link: https://account.windowsazure.com/PreviewFeatures If you’ve been to any of my presentations lately, you’ll know that I’m fired up about these new offerings. As I’ve worked through some scenarios for myself and with my customers, I’ve been collecting the resources that helped me to ramp up. Here’s a collection of links to the items I’ve found most useful: Core Resources Digital Chalk Talk Videos – detailed technical overviews of the new Windows Azure services and supporting technologies as announced June 7, including Virtual Machines (IaaS Windows and Linux), Storage, Command Line Tools http://www.meetwindowsazure.com/DigitalChalkTalks Scenarios Videos on You Tube – “how to” guides, including “Create and Manage Virtual Networks”, “Create & Manage SQL Database”, and many more http://www.youtube.com/user/windowsazure Windows Azure Trust Center - provides a comprehensive of view of Windows Azure and security and compliance practices http://www.windowsazure.com/en-us/support/trust-center/ MSDN Forums for Windows Azure http://www.windowsazure.com/en-us/support/preview-support/ Microsoft Knowledge Base article Microsoft server software support for Windows Azure Virtual Machines Videos Deep Dive into Running Virtual Machines on Windows Azure Windows Azure Virtual Machines and Virtual Networks Windows Azure IaaS and How It Works Deep Dive into Windows Azure Virtual Machines: From the Cloud Vendor and Enterprise Perspective An Overview of Managing Applications, Services, and Virtual Machines in Windows Azure Monitoring and Managing Your Windows Azure Applications and Services Overview of Windows Azure Networking Features Hybrid Will Rule: Options to Connect, Extend and Integrate Applications in Your Data Center and Windows Azure Business Continuity in the Windows Azure Cloud Linux on Windows Azure Blogs Understanding Windows Azure Virtual Machines An Overview of Windows Azure Virtual Network Virtual Machines and Windows Running SQL Server in a Windows Azure Virtual Machine Support for Linux Virtual Machines on Windows Azure

    Read the article

  • Screen capture doesn't work on MFC application in Vista

    - by David Thornley
    We've got some in-house applications built in MFC, with OpenGL drawing routines. They all use the same code to draw on the screen and either print the screen or save it to a JPEG file. Everything's been working fine in Windows XP, and I need to find a way to make them work on Vista. In three of our applications, everything works. In the remaining one, I can get the window border, title bar, menus, and task bar, but the interior never shows up. As I said, these applications use the exact same code to write to the screen and capture the window image, and the only difference I see that looks like it might be relevant is that the problem application uses the MFC multiple document interface, while the ones that work use the single document interface. Either the answer isn't on the net, or I'm worse at Googling than I thought. I asked on the MSDN forums, and the only practical suggestion I got was to use GDI+ rather than GDI, and that did nothing different. I have tried different things with every part of the code that captures and prints or save, given a pointer to the window, so apparently it's a matter of the window itself. I haven't rebuilt the offending application using SDI yet, and I really don't have any other ideas. Has anybody seen anything like this?

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >