Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 670/778 | < Previous Page | 666 667 668 669 670 671 672 673 674 675 676 677  | Next Page >

• Joining two routers together, but I have no access to the second router, although I know it's IP address and Gateway

  - by JohnnyVegas

  I have temporarily moved into a rented apartment for 4 months, which has wireless. The trouble I am having is that the access points here are wifi only and no RJ45 and I need to use RJ45 to connect some equipment that I am working with. I have purchased an RT-N66U and installed Tomato (shibby ver. 1.28) and successfully replaced the existing access point, but now I want to enable the access point that I have replaced as it links wirelessly to 3 others. Can I plug in a cable from the access point to my RT-N66U and get it to access the internet via my router? I have no access to the existing wireless access point, and don't want to reset it as it's not mine. There is another router situated in the roof somewhere which I also have no access to, but it's supplying my RT-N66U internet and I most definitely have a double-nat, which although isn't the best way of doing things I am limited with what I can do. Any suggestions on routing tables, vlans etc would be helpful, but I have no experience in these fields before - but I know the tomato firmware can cater for this. My router is set to IP 10.0.1.1 and dhcp is 10.0.1.100-200 The wireless access point address was 192.168.1.2 but this was assigned by the router in the roof which has the address 192.168.1.1. There is a cable from this router going to a wall socket which I now have my RT-N66u attached to via the WAN port. I understand it's scruffy and it isn't the way to do things but I have tried to ask for the admin details but as the wireless network is looked after by a third party and nobody knows their details I am stuck with this dilemma. I could buy three wireless access points and replace the existing but this isn't what I want to do, and although I have installed plenty of DD-WRT wireless repeater bridges they simply don't work here for some unknown reason. The phone line here is very noisy too and I don't have the rights to install ADSL in a building that isn't mine, and 3G coverage isn't good enough either. Thanks for your time

  Read the article

• Can't connect to a Hyper-V VM from anywhere but the host OS

  - by Elbelcho

  I have an unusual situation on hand where I'm able to connect to a Hyper-V guest VM from the HOST, but not from anywhere but the host. The VM is running WIn2k8R2 and has IIS installed and Remote Desktop enabled. If I browse to the IP from the host OS, the IIS7 page displays. I can also RDP into the guest OS from the host as well as ping. From OFF the host, RDP, web and ping all fail. If I completely shut off the guest VM's firewall, ping will then start to respond, but all RDP and port 80 still don't. The physical host machine has 2 nics installed, but only one is plugged in. The one plugged in has a static IP. I have one Hyper-V virtual network and it's set to external. The guest VM has one NIC with a different static IP than the host, but both are on the same subnet. The host machine is joined to the domain, the guest VM is not. Any sugestions? Thanks so much for any help you may be able to provide!

  Read the article

• Sync desktop Mac environment to laptop

  - by Andrew Vit

  I spend the majority of my time working at my desktop Mac, which I have configured for my web development environment. My spouse has a MacBook for casual use, and I occasionally steal it back when I need to work off-site, or when travelling. The question is how to best synchronize the two so I can switch between them more readily. I've solved a few obvious things by using online services: Email is hosted on IMAP. Working files are in Dropbox. Source code is managed in git. However, the following are things I always miss when jumping on the laptop: Installed Applications (current versions) Installed libraries & utilities (/usr/local) Apache VirtualHosts & other configurations (/etc) Disk image files for VMs My current method is to connect the MacBook via Firewire target mode and rsync the /Users/me home directory, and then cherry-pick the other items I need from Applications, /etc and /usr/local. The problem with this method is that it can be very time consuming due to things like my virtual machine image files, cached emails, etc. How can I make this faster & easier? Can you recommend a solution for configuration management (so I can repeatably install & configure the same software on both), or synchronization (so I can bring the MacBook up to date nightly, over our home network)?

  Read the article

• Setting up Squid -> VPN connection

  - by Nedlinin

  I recently purchased a VPS and am wanting to use it as a VPN server. However, it has bandwidth limitations. So, I figured since I already have a local Squid proxy caching things for me, I could have users connect to the proxy and the proxy connect to the VPN. Then when someone hits the web, Squid will serve it from cache if available and, if not, it will use the VPN to download it. My issue is, I have no idea how to set this up :p - Essentially I want Machine - Squid - VPN. My VPN is running on Ubuntu Server with pptpd. Squid is running on a local Arch Linux box. Squid and the VPN are both working perfectly independently. Any help on how to have Squid push traffic through the VPN would be greatly appreciated! Also: I don't actually want to use the VPN for all traffic. Otherwise, I'd just connect my router to the VPN and be happy. I only want to use it for web traffic from specific machines on the network.

  Read the article

• F5 Networks iRule/Tcl - Escaping UNICODE 6-character escape sequences so they are processed as and r

  - by openid.malcolmgin.com

  We are trying to get an F5 BIG-IP LTM iRule working properly with SharePoint 2007 in an SSL termination role. This architecture offloads all of the SSL processing to the F5 and the F5 forwards interactive requests/responses to the SharePoint front end servers via HTTP only (over a secure network). For the purposes of this discussion, iRules are parsed by a Tcl interpretation engine on the F5 Networks BIG-IP device. As such, the F5 does two things to traffic passing through it: Redirects any request to port 80 (HTTP) to port 443 (HTTPS) through HTTP 302 redirects and URL rewriting. Rewrites any response to the browser to selectively rewrite URLs embedded within the HTML so that they go to port 443 (HTTPS). This prevents the 302 redirects from breaking DHTML generated by SharePoint. We've got part 1 working fine. The main problem with part 2 is that in the response rewrite because of XML namespaces and other similar issues, not ALL matches for "http:" can be changed to "https:". Some have to remain "http:". Additionally, some of the "http:" URLs are difficult in that they live in SharePoint-generated JavaScript and their slashes (i.e. "/") are actually represented in the HTML by the UNICODE 6-character string, "\u002f". For example, in the case of these tricky ones, the literal string in the outgoing HTML is: http:\u002f\u002fservername.company.com\u002f And should be changed to: https:\u002f\u002fservername.company.com\u002f Currently we can't even figure out how to get a match in a search/replace expression on these UNICODE sequence string literals. It seems that no matter how we slice it, the Tcl interpreter is interpreting the "\u002f" string into the "/" translation before it does anything else. We've tried various combinations of Tcl escaping methods we know about (mainly double-quotes and using an extra "\" to escape the "\" in the UNICODE string) but are looking for more methods, preferably ones that work. Does anyone have any ideas or any pointers to where we can effectively self-educate about this? Thanks very much in advance.

  Read the article

• Understanding what needs to be in place for a server to send outgoing email from a linux box

  - by Matt

  I am attempting to configure an openSuse 11.1 box to send outgoing email for a domain that the same server is hosting. I don't understand enough about smtp servers and the like to know what needs to be in place and working. The system already had Postfix installed, and I confirmed it was running via a > sudo /etc/init.d/postfix status I examined the Postfix config file in /etc/main.cf and configured a couple of items regarding the domain/host name and such, but left it largely default. I attempted to send an email from the command line with the following command: > echo "test 123" | mail -s "test subject" [email protected] Where differentdomain.com was not the same domain as the one best hosted on the server. However, the email never reaches the target account. Any suggestions? EDIT: In the postfix log, (/var/log/mail.info, there's nothing in .err) I see that postfix is trying to connect to what appears to be a different smtp server on our network, with a connection refused: connect to ourdomain.com.inbound15.mxlogic.net[our ip address]:25: Connection refused However, I can't figure out why it is 1) trying to connect to that server and 2) not just sending the messages itself... I mean, isn't postfix an smtp server? I did a grep -ri on ourdomain from /etc and see no configuration files anywhere telling it to do this. Why is it?

  Read the article

• SSH to VM rejecting password, works from virt-manager console

  - by boundless08

  First of all, I'm sorry if there is a duplicate post somewhere. I searched for a while but none of the posts I found fixed my problem. It's fairly annoying. I created a new VM on our network and when using virt-manager I can log into the VM fine with the username and password. When I try to ssh to the VM from anywhere else it rejects the password, but I know the password is correct. I've even changed it multiple times to make sure its correct. The address I'm ssh'ing to is definitely pointing at the right VM as well, I've tested all this. It's still usable, but the virt-manager console is very limited so the sooner I can get to the bottom of this the better. VM is running ubuntu 12.04 btw. EDIT 1 Checked the auth.log and all I'm getting is "sshd[29304]:Connection closed by 'server.ip.address' [preauth]". I also tried allowing logging in as root, and even turned off password auth altogether in sshd_config and still nothing! I then turned on "AllowEmptyPasswords", still a whole lot of nothing.

  Read the article

• Blank desktop when logging into a Virtualized Windows 2008 Terminal Server?

  - by Rachel

  We have a Virtualized Terminal Server running Windows Server 2008. When the admin user logs in, everything is fine. When anyone else logs in, their desktop and start menu is blank (they have the taskbar, start button, and quick launch links though). If I go into Windows Explorer, I can see icons in their desktop folder (although the icon image is missing and it is just displaying the generic icon), but can't run any of them. If I login with a user that is part of the Administrator group in Active directory, I get the same behavior except I can launch the programs found in the Desktop Folder of Windows Explorer. I cannot drag these items out onto the desktop though - The cursor doesn't allow me to drop them. From Task Manager I can see that explorer.exe and dwm.exe are both running. The Authenticated Users and Interactive groups are both under the Users group, along with our network's Domain Users group. Does anyone know why this is happening and how I can fix it? Also, not sure if it's related but about 1 in every 3 logins just hangs at a completely blank blue screen (no start button, taskbar, or quick launch buttons) and needs to be disconnected / reset by an admin. Edit I just noticed that the desktop itself doesn't even respond to click events. It's almost like the entire desktop is missing. At first I thought it didn't respond to right-click events because of an AD policy, but then I noticed if you open the Start Menu and click the desktop, the start menu doesn't shut like it should

  Read the article

• I can't download or stream for more then 3 sec, and then the conection activity just dies

  - by JMHein

  Just got a new internet connection installed at my sisters place, but it randomly just stops working. At first it was only affecting flash videos. they would randomly just stop buffering. I did a lot of research on this and found that there can be many things that cause this exact trouble. I then tried IE and some flash would stream fine, but still random deaths. So I told my brother in law to reset the router and modem and that fixed the problem for them but not my laptop. I then started trying to fix the flash problem only to fined that downloads of any kind were affected. Now it is so bad that 50% of page loads will never finish because the connection drops to 0% usage with in a split sec. I can't get flash reinstalled because the installer is trying to download but the download dies at 8% I tried up loading a large file by FTP to a web server with no troubles. Yet any activity on my end that takes longer then about 1 sec to finish, just never finishes I can watch the network log in the taskmanager and it spikes for ruffly one sec then drops back to zero and when I go back to the web page it says it is still loading and no matter how long I let it sit it never does any thing more till I reload then it will again create a very short spike of activity on the connection and then drop to zero. Also if I start a download and it does drop off I can restart the download where it left off and get up to 100Kb/s for around the same one sec then it drops to around 14Kb/s then zero a sec latter... I am running Win 7 home prem x64 with FF11 and IE8 I have simply tried every thing I can short of calling up the ISP which very likely will get me no where fast. any advice on what step to take to figure this out would be nice. I am not even sure it is not just an ISP problem. (at least I should be able to get flash reinstalled once I get back home)

  Read the article

• Rack layout for future growth

  - by bleything

  We're getting ready to move to a new colo facility and I'm designing the rack layout. While we have a full rack, we only have 12U worth of hardware right now: 1x 1U switch 7x 1U servers 1x 2U server 1x 2U disk shelf The colo facility requires us to front-mount the switch and use a 1U brush strip, so we'll be using a total of 13U of space. Regarding growth, I'm reasonably sure we'll be adding another 4U in servers, 1-2U of network gear, and 2-4U of storage in the mid-term. Specific questions I'm hoping to get help with: where should I mount the switch? the LEDs are on top... should I group the servers by function with space for adding new machines? as an alternative, should I group servers based on whether they are production or staging? where in the rack should I start? in the middle? at the top? at the bottom? equally spaced? Here's a silly little ASCII diagram of what I'm thinking right now. Please feel free to tear my design apart, I've really no idea what I'm doing :) Any advice is very welcome. edit: to be clear, the colo is providing redundant power with UPS and generator, so that's why there's no power gear in the plan, except for the 0U PDU that I didn't diagram. 42 | -- switch ---------------------- 41 | -- brush strip ----------------- 40 | ~~ reserved for second switch ~~ 39 | ~~ reserved for firewall ~~~~~~~ 38 | 37 | -- admin01 --------------------- 36 | 35 | -- vm01 ------------------------ 34 | -- vm02 ------------------------ 33 | ~~ reserved for vm03 ~~~~~~~~~~~ 32 | ~~ reserved for vm04 ~~~~~~~~~~~ 31 | ~~ reserved for vm05 ~~~~~~~~~~~ 30 | 29 | -- web01 ----------------------- 28 | -- web02 ----------------------- 27 | ~~ reserved for web03 ~~~~~~~~~~ 26 | ~~ reserved for web04 ~~~~~~~~~~ 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | -- db01 ------------------------ 15 | +- disks ----------------------+ 14 | +------------------------------+ 13 | ~~ reserved for more ~~~~~~~~~~~ 12 | ~~ db01 disks ~~~~~~~~~~~~~~~~~~ 11 | 10 | +- db02 -----------------------+ 9 | +------------------------------+ 8 | ~~ reserved for db02 ~~~~~~~~~~~ 7 | ~~ disks ~~~~~~~~~~~~~~~~~~~~~~~ 6 | ~~ reserved for more ~~~~~~~~~~~ 5 | ~~ db02 disks ~~~~~~~~~~~~~~~~~~ 4 | 3 | 2 | 1 |

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely Accessing IP restricted server from dynamic IP which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was Static IP for dynamic IP the first answer seems exactly what I need but I dont know how I would go about doing the same on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

  - by Joel Alenchery

  Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely http://serverfault.com/questions/187231/accessing-ip-restricted-server-from-dynamic-ip which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was http://serverfault.com/questions/136806/static-ip-for-dynamic-ip the first answer seems exactly what I need but I dont know how I would go about on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

  Read the article

• Can't find disk usage in one directory

  - by Xster

  Similar questions are asked frequently but no suggested answers solved my issue. I have some disk space usage that I can't find as well. In df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 144183992 136857180 2652 100% / udev 2013316 4 2013312 1% /dev tmpfs 808848 876 807972 1% /run none 5120 0 5120 0% /run/lock none 2022116 76 2022040 1% /run/shm overflow 1024 0 1024 0% /tmp I checked the inodes, I checked lsof for +L1 or deleted files, I rebooted, I checked for files hidden behind mounts but none of them were the issue. It grows periodically and I'm running out of things to delete to feed the beast. It's all in the home directory of the only user I have. In du in ~ du -h --max-depth=1 192K ./.nv 2.1M ./.gconf 12K ./Pictures 1.6M ./.launchpadlib 12K ./Public 24K ./.TemporaryItems 8.9M ./.cache 12K ./Network Trash Folder 28K ./.vnc 11M ./.AppleDB 48K ./.subversion 1.9G ./.xbmc 8.0K ./.AppleDesktop 12K ./.dbus 81M ./.mozilla 12K ./Music 160K ./.gnome2 44K ./Downloads 692K ./.zsh 236K ./.AppleDouble 64K ./.pulse 4.0K ./.gvfs 1.4M ./.adobe 44K ./.pki 44K ./.compiz-1 168K ./.config 1.4M ./.thumbnails 12K ./Templates 912K ./.gstreamer-0.10 8.0K ./.emacs.d 92K ./Desktop 1.3M ./.local 12K ./Ubuntu One 12K ./Documents 296K ./.fontconfig 12K ./.qt 12K ./.gnome2_private 20K ./.ssh 20K ./.mission-control 12K ./Videos 12K ./Temporary Items 640K ./.macromedia 124G . I can't find a way to figure out how it got to that 124G in that directory. There are no mount points in home.

  Read the article

• PNP4Nagios, nagiosgraph, separate Cacti, or something else for Nagios trending.

  - by Matt

  I've been using Nagios for a while now and recently started using Cacti after being dissatisfied with the lack of scaling and lack of any GUI in MRTG. I'm interested in adding trending to my Nagios installation and wondered what was the best route to go. I've looked around a bit and have seen what's available, but there's not a lot of information around to differentiate them from each other. My Nagios install has about 250 hosts and 1100 service checks, but many of them are just simple network devices and there's only about 20 servers and 300 services associated with them. All servers but 2 are running Windows Server 2003. What are the main highlights of PNP4Nagios vs. nagiosgraph, or would I be better off using some sort of tool to convert the data to RRD form and just view it directly in Cacti? Is there a completely different direction I could go that would be even better? Please comment if you need any more information, I tend to be too wordy and tried to keep this question brief. Thanks!

  Read the article

• IIS8 behind a VPN + Windows Server 2012 - how to properly bind IP+Port

  - by ryugen

  This is my first question so I hope I'm going to give you enough information. I'm running Windows Server 2012 within the Hyper-V environment of my Windows 8 machine. Within Windows Server 2012 I'm running a VPN tool based on openVPN to hide my real IP. When I run IIS8 with the VPN disconnected it works flawlessly through the Internet (port 80 forwarded correctly). But as soon as I connect to the VPN I can't reach my site through the domain anymore. Now I tried basically everything I know which is why I'm asking you guys. I tried binding IIS8 to the IP of my virtual ethernet card. I tried changing the priority of the NIC through the "Network and sharing center" via the advanced tab. I used ipconfig /flushdns in case there was something wrong in the DNS handling. Hell, I even turned off the Windows firewall. I also used a port scanner to verify the problem. The webserver is reachable on port 80 with VPN disconnected and immediately gets unreachable on connect. Theoretically both IPs (my regular one AND the VPN) should be reachable or at least not impair the other one right? Do you have any other suggestion? Do I have to route something somewhere somehow?

  Read the article

• Windows 7 deployment thru WDS

  - by vn

  Hello, I am deploying new systems on my network and I built my reference computer by installing the OS the manufacturers (Dell and a custom built system from some local business) gave with all drivers, installed all the desired applications. As for the settings part, I'm doing most of it thru GPOs. I want to image my reference computer and deploy it with WDS. i found several links on how to sysprep, but they're all doing it with some differences without explaining them. My questions : How do I manage (into sysprep) the domain join/computer naming part since (from what I understand) WDS manages that? How do I know/determine what I need to setup into my sysprep.xml? Can you sysprep a first time, try and if it fails, do some modifications and try again? I am thinking of doing a basis sysprep, checking what info can be automated and correct that in the answer file. What do I miss if skipping the "audit" mode? I don't plan on re-doing the reference computer... I read that when sysprepping, it resets settings from the reference computer like the computer name, activation/key and such... what setting is sysprep resetting by default that I should be aware of? I must admit I am quite lost about Win7, sysprep, RIS, MDI toolkit, WDS.. I understand the way of doing with XP, but it changed so much with Windows 7! The links I am reading are : http://far2paranoid.wordpress.com/2007/12/05/prep-for-sysprep/ http://blog.brianleejackson.com/sysprep-a-windows-7-machine-%E2%80%93-start-to-finish-v2 http://www.ehow.com/print/how_5392616_sysprep-machine-start-finish-v2.html Thank you VERY much for any answers, they are much appreciated.

  Read the article

• Apache doesn't immediately notice a change in the document root

  - by Tom

  We use capistrano for website deployments and our Apache document root is a symlink to a particular code release. The deployment procedure switches the symlink from the old release to the new release as the final step of the deployment. We are migrating our webservers from real servers running RHEL 5.6 to Amazon EC2 virtual machines running Ubuntu 11.10 and the new servers are suffering from a problem where Apache doesn't immediately notice the change to it's document root when the symlink is switched. It can take a second or so (and I think I've even seen it take a couple of minutes). It's kind of like Apache has cached the physical path of the symlink for some time. Does anyone know some Apache settings I could look at to get it to "scan" for changes to it's served files quicker. Thoughts: I read that the disks on virtual machines are much slower (since they are network attached storage). Perhaps the filesystem cache somehow works differently too? If so, is there anything that can be done? The website runs PHP code. Perhaps there is some PHP config differences between RHEL and Ubuntu? I checked realpath_cache_ttl but both servers have it commented out: e.g. ; Duration of time, in seconds for which to cache realpath information for a given ; file or directory. For systems with rarely changing files, consider increasing this ; value. ; http://www.php.net/manual/en/ini.core.php#ini.realpath-cache-ttl ;realpath_cache_ttl = 120 We do use the APC opcode cache but don't think it's the issue due to experimentation. The PHP code is in different file paths for each deployment and we ensure stat=1. Here is a similar question that is very interesting: 294107 - but doesn't provide an answer for me. One solution would be to reload Apache everytime we modify the document root symlink. I'll do this if we can't find another solution.

  Read the article

• Default route not on LAN

  - by jarmund

  I have a network that in principle looks like this: H1---\ /----Inet1 H2---->---GW1---< H3---/ \----GW2-----Inet2 H1 and H2 = Hosts that need access to internet with GW1 Inet1 = Internet link over 3G connection Inet2 = 5GHz link to Internet (not always up) GW1 = Works as a router, automatically picking the "best" connection between Inet1 and Inet2 (the latter via GW2). GW2 = 5GHz wifi router And here's the problem: H3 only needs internet access when Inet2 is up. What i was thinking of doing was a routing table that looks like this: route to GW2 via GW1 default route is via GW2 I first set the route to GW2 via GW1 without a problem. But when i try route add default gw 1.2.3.4 (1.2.3.4 being the IP of GW2), it complains "SIOCADDRT: No such device" Is the problem that the default gw i'm trying to set is not reachable directly? Is there a different approach that would allow me to achieve this? An alternative (and hypothetical) approach: Since H3 will be using a static IP, is it possible to do some magic with iptables on GW1 to forward any packets from H3 to GW3, thereby "tricking" H3 into using GW2 as its default router?

  Read the article

• Wireless disconnect randomly with wpa_supplicant reason=2

  - by renenglish

  I installed ubuntu-server 12.04 on my PC , and I use an usb wireless card to join the network. It works ok when I boot up my PC , but the wireless disconnects after a while. I pkill wpa_supplicant and reload the driver rtl8192cu , then it works a again. Then it disconnect again after about a random minutes. Here is the syslog: 22384 May 29 21:49:27 homecenter kernel: [ 6450.459313] wlan1: authenticated 22385 May 29 21:49:27 homecenter kernel: [ 6450.459535] wlan1: associate with f4:ec:38:45:62:74 (try 1) 22386 May 29 21:49:27 homecenter kernel: [ 6450.469080] wlan1: RX AssocResp from f4:ec:38:45:62:74 (capab=0 x431 status=0 aid=3) 22387 May 29 21:49:27 homecenter kernel: [ 6450.469085] wlan1: associated 22388 May 29 21:49:27 homecenter wpa_supplicant[2342]: Associated with f4:ec:38:45:62:74 22389 May 29 21:49:27 homecenter kernel: [ 6450.481933] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready 22390 May 29 21:49:27 homecenter wpa_supplicant[2342]: WPA: Key negotiation completed with f4:ec:38:45:62:7 4 [PTK=CCMP GTK=CCMP] 22391 May 29 21:49:27 homecenter wpa_supplicant[2342]: CTRL-EVENT-CONNECTED - Connection to f4:ec:38:45:62: 74 completed (auth) [id=0 id_str=] 22392 May 29 21:49:38 homecenter kernel: [ 6461.472014] wlan1: no IPv6 routers present 22393 May 29 21:49:38 homecenter ntpdate[2263]: step time server 91.189.94.4 offset 0.012758 sec 22394 May 29 21:49:51 homecenter ntpdate[2404]: step time server 91.189.94.4 offset -0.001190 sec 22395 May 29 21:54:38 homecenter kernel: [ 6762.052030] wlan1: deauthenticated from f4:ec:38:45:62:74 (Reas on: 2) 22396 May 29 21:54:38 homecenter wpa_supplicant[2342]: CTRL-EVENT-DISCONNECTED bssid=f4:ec:38:45:62:74 reas on=2 22397 May 29 21:54:38 homecenter kernel: [ 6762.064744] cfg80211: All devices are disconnected, going to re store regulatory settings 22398 May 29 21:54:38 homecenter kernel: [ 6762.064752] cfg80211: Restoring regulatory settings 22399 May 29 21:54:38 homecenter kernel: [ 6762.064757] cfg80211: Calling CRDA to update world regulatory d omain 22400 May 29 21:54:38 homecenter kernel: [ 6762.069938] cfg80211: Ignoring regulatory request Set by core s ince the driver uses its own custom regulatory domain 22401 May 29 21:54:38 homecenter kernel: [ 6762.069943] cfg80211: World regulatory domain updated: 22402 May 29 21:54:38 homecenter kernel: [ 6762.069945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 22403 May 29 21:54:38 homecenter kernel: [ 6762.069949] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22404 May 29 21:54:38 homecenter kernel: [ 6762.069952] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22405 May 29 21:54:38 homecenter kernel: [ 6762.069956] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22406 May 29 21:54:38 homecenter kernel: [ 6762.069959] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22407 May 29 21:54:38 homecenter kernel: [ 6762.069962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KH z), (300 mBi, 2000 mBm)

  Read the article

• Route forwarded traffic through eth0 but local traffic through tun0

  - by Ross Patterson

  I have a Ubuntu 12.04/Zentyal 2.3 server configured with WAN NATed on eth0, local interfaces eth1 and wlan0 bridged on br1 on which DHCP runs, and an OpenVPN connection on tun0. I only need the VPN for some things running on the gateway itself and I need to make sure that everything running on the gateway goes through the VPNs tun0. root:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default gw... 0.0.0.0 UG 100 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 br1 192.168.1.0 * 255.255.255.0 U 0 0 0 br1 A.B.C.0 * 255.255.255.0 U 0 0 0 eth0 root:~# ip route 169.254.0.0/16 dev br1 scope link metric 1000 192.168.1.0/24 dev br1 proto kernel scope link src 192.168.1.1 A.B.C.0/24 dev eth0 proto kernel scope link src A.B.C.186 root:~# ip route show table main 169.254.0.0/16 dev br1 scope link metric 1000 192.168.1.0/24 dev br1 proto kernel scope link src 192.168.1.1 A.B.C.0/24 dev eth0 proto kernel scope link src A.B.C.D root:~# ip route show table default default via A.B.C.1 dev eth0 How can I configure routing (or otherwise) such that all forwarded traffic for other hosts on the LAN goes through eth0 but all traffic for the gateway itself goes through the VPN on tun0? Also, since the OpenVPN client changes routing on startup/shutdown, how can I make sure that everything running on the gateway itself loses all network access if the VPN goes down and never goes out eth0.

  Read the article

• Workstations cannot see new MS Server 2008 domain, but can access DHCP.

  - by Radix

  The XP Pro workstations do not see the new replacement domain upon boot; they only see their cached entry for the old (server 2003) domain controller. The old_server is not connected to the network. I have DHCP working with the same scope as the old_server. In my "before-asking" search for a solution I came across the following two articles, and I recall doing things as suggested by the articles. http://www.windowsreference.com/windows-server-2008/how-to-setup-dhcp-server-in-windows-server-2008-step-by-step-guide/ http://www.windowsreference.com/windows-server-2008/step-by-step-guide-for-windows-server-2008-domain-controller-and-dns-server-setup/ The only possible issue is: I was under the impression that the domain netbios needed to match the DC's netbios. The DC netbios is city01 while the domain's FQDN is city.domain.org (I think this is mistaken and should have been just domain.org) But, the second link led me to a post which I believe answers my question. I did as they instructed by opening Local Area Connection Properties, then selecting TCP/IPv4 and setting the sole preferred DNS server to the local hosts static IP (10.10.1.1). Search for "Your problems should clear up" for the post I'm referencing: http://forums.techarena.in/active-directory/1032797.htm Have I misunderstood their instructions? I am hoping to reach the point where I can define users and user groups. Also, does TechNet have a single theoretical overview document I could read. I really don't like treating comps as magic. I will be watching this closely and will quickly answer any questions. If I've left anything out it is because I did not know it was needed. PS: I am loath to ask obviously basic questions, but I am tired and wish to fix this before tomorrow. Also, this is my first server installation, thank you for your help.

  Read the article

• SQL Server 2005 - Linked Visual Foxpro Authorization

  - by John

  Here's the Scenario: We have an existing SQL 2000 Server that has a linked server to a share directory (on another server) containing Visual FoxPro tables; all connections work correctly. Porting the SQL 2000 server to a new SQL 2005 server results in questionable behavior: If you connect to the server, remotely, using Windows Authentication, you receive this error when running a query against the linked server: OLE DB provider "MSDASQL" for linked server "[linked server name]" returned message "[Microsoft][ODBC Visual FoxPro Driver]File 'MyTable.dbf' does not exist.". Msg 7350, Level 16, State 2, Line 2 Cannot get the column information from OLE DB provider "MSDASQL" for linked server "[linked server name]". However, logged in locally, the query works fine. The query also works correctly when logged in remotely, but using a SQL login. The only scenario I receive the error is when connected remotely, using windows authentication. As I mentioned before, this works on the SQL 2000 server, and both the old and new servers are running under the same network account (which has access to the folder the FoxPro files are in). Doing a little searching on the internet it looks like others have run into this situation, but I haven't found a resolution. Has anyone run into this before?

  Read the article

• Outside VPN traffic not able to ping site-to-site VPN remote site

  - by Siriss

  we have two ASA 5510s running 8.4 in a site-to-site VPN setup. All internal traffic is working smoothly. Site/Subnet A: 192.100.0.0 - local Site/Subnet B: 192.200.0.0 - remote VPN Users: 192.100.40.0 - assigned by ASA When you VPN into the network, all traffic hits Site A, and everything on subnet A is accessible. Site B however, is completely inaccessible for VPN users. All machines on subnet B, the firewall itself, etc... is not reachable by ping or otherwise. I know I am missing a NAT rule, and in 8.2, it was easy as pie to setup using ASDM, but now I can't get it for the life of me as 8.4 apparently made a lot of changes to NAT rules. I am not too comfortable in the ASA command line, but if there is a command I need to add or if you could direct me where I can add this in 8.4 ASDM I would really appreciate it. I have tired NAT Exempt, Static NAT, Static NAT Policies, etc... I think I tried all the options. I also might have my interfaces confused with the new look at feel of ASDM. Thank you much in advance and I hope I have been thorough enough.

  Read the article

• cygwin sshd times out for remote login

  - by reve_etrange

  I have configured SSHD using Cygwin on Windows 7. I have checked and double-checked all of the following points: Port forwarding is correctly configured Windows Firewall is configured to pass port 22 Local login attempts (using Cygwin SSH) succeed sshd_config has UseDNS No Using nmap from remote machine confirms port 22 is accessible /etc/passwd and /etc/group are correctly populated However, remote login attempts time out. This includes from the local network. user@host:~$ ssh -vvv [email protected] OpenSSH_5.5p1 Debian-4ubuntu6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /home/user/.ssh/config debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to the.ip.add.ress [the.ip.add.ress] port 22. debug1: connect to address the.ip.add.ress port 22: Connection timed out ssh: connect to the.ip.add.ress port 22: Connection timed out No messages are logged to /var/log/sshd.log. I suspect that there is a permissions issue with a particular file somewhere, however I have checked the permissions of all my Cygwin binaries, DLLs and the particular files important to Cygwin sshd, including all of: /etc/passwd /etc/group /var /var/log/sshd.log /var/empty Others who have reported this or similar errors appear to have missed one of the points enumerated above. Can anyone point me to a possible solution?

  Read the article

• How to wire 20 computers and 20 phones and 1 server into LAN?

  - by John Smith

  I have currently 3 switches Two Netgear JFS524 with 24 slots, One Belkin with 16 slots. Server DSL Internet Router. Main question is how to connect switches together, two Netgear's are next to each other, yet one is about 100 feet away and holds about 5 computer and 5 phones. If i connect them with only 1 wire will that limit bandwidth? e.g. all 23 computers will be limited to speed of one CAT5e cable? If i connect switches with 2 cables will this give speed boost? What's the ideal scenario should i just move the third switch next to other two? Will the speed of computer connected to white switch be same as computer connected to top switch? Will moving white switch right next top switch and having 16 wires comming 100 feet instead of 1 wire comming 100 feet make it faster? EDIT 1: I actually have NETGEAR ProSafe GS105 Gigabit switch its only has 4 ports in it though, you think i can have use of it in current setup? Like connect all 3 switches and server into it and keep internet router and phone server on one of the slower switches EDIT 2: Everyone mention gigabit switches, but will they do any difference with 10/100 network cards? I then have to use gigabit cards in every computer too? I could in server perhaps, but users will be 10/100

  Read the article

< Previous Page | 666 667 668 669 670 671 672 673 674 675 676 677  | Next Page >