Search Results

Search found 16894 results on 676 pages for 'private members'.

Page 671/676 | < Previous Page | 667 668 669 670 671 672 673 674 675 676  | Next Page >

• Feedback + Bad output

  - by user1770094

  So I've got an assignment I think I'm more or less done with, but there is something which is messing up the output badly somewhere down the line, or even the calculation, and I don't see where the problem is. The assignment is to make a game in which a certain ammount of players run up through a tunnel towards a spot,where they will stop and spin around it,and then their dizziness is supposed to make them randomly either progress towards goal or regress back towards start.And each time they get another spot closer to goal,they get another "marking",and it goes on like this until one of them reaches goal. The program includes three files: one main.cpp,one header file and another cpp file. The header file: #ifndef COMPETITOR_H #define COMPETITOR_H #include <string> using namespace std; class Competitor { public: void setName(); string getName(); void spin(); void move(); int checkScore(); void printResult(); private: string name; int direction; int markedSpots; }; #endif // COMPETITOR_H The second cpp file: #include <iostream> #include <string> #include <cstdlib> #include <ctime> #include "Competitor.h" using namespace std; void Competitor::setName() { cin>>name; } string Competitor::getName() { return name; } void Competitor::spin() { srand(time(NULL)); direction = rand()%1+0; } void Competitor::move() { if(direction == 1) { markedSpots++; } else if(direction == 0 && markedSpots != 0) { markedSpots--; } } int Competitor::checkScore() { return markedSpots; } void Competitor::printResult() { if(direction == 1) { cout<<" is heading towards goal and has currently "<<markedSpots<<" markings."; } else if(direction == 0) { cout<<"\n"<<getName()<<" is heading towards start and has currently "<<markedSpots<<" markings."; } } The main cpp file: #include <iostream> #include <string> #include <cstdlib> #include <ctime> #include "Competitor.h" using namespace std; void inputAndSetNames(Competitor comps[],int nrOfComps); void makeTwist(Competitor comps[],int nrOfComps); void makeMove(Competitor comps[],int nrOfComps); void showAll(Competitor comps[],int nrOfComps); int winner(Competitor comps[],int nrOfComps, int nrOfTwistPlaces); int main() { int nrOfTwistPlaces; int nrOfComps; int noWinner = -1; int laps = 0; cout<<"How many spinning places should there be? "; cin>>nrOfTwistPlaces; cout<<"How many competitors should there be? "; cin>>nrOfComps; Competitor * comps = new Competitor[nrOfComps]; inputAndSetNames(comps, nrOfComps); do { laps++; cout<<"\nSpin "<<laps<<":"; makeTwist(comps, nrOfComps); makeMove(comps, nrOfComps); showAll(comps, nrOfComps); }while(noWinner == -1); delete [] comps; return 0; } void inputAndSetNames(Competitor comps[],int nrOfComps) { cout<<"Type in the names of the "<<nrOfComps<<" competitors:\n"; for(int i=0;i<nrOfComps;i++) { comps[i].setName(); } cout<<"\n"; } void makeTwist(Competitor comps[],int nrOfComps) { for(int i=0;i<nrOfComps;i++) { comps[i].spin(); } } void makeMove(Competitor comps[],int nrOfComps) { for(int i=0;i<nrOfComps;i++) { comps[i].move(); } } void showAll(Competitor comps[],int nrOfComps) { for(int i=0;i<nrOfComps;i++) { comps[i].printResult(); } cout<<"\n\n"; system("pause"); } int winner(Competitor comps[],int nrOfComps, int nrOfTwistPlaces) { int end = 0; int score = 0; for(int i=0;i<nrOfComps;i++) { score = comps[i].checkScore(); if(score == nrOfTwistPlaces) { end = 1; } else end = -1; } return end; } I'd be grateful if you would point out other mistakes if you see any.Thanks in advance.

  Read the article

• Multi-threading does not work correctly using std::thread (C++ 11)

  - by user1364743

  I coded a small c++ program to try to understand how multi-threading works using std::thread. Here's the step of my program execution : Initialization of a 5x5 matrix of integers with a unique value '42' contained in the class 'Toto' (initialized in the main). I print the initialized 5x5 matrix. Declaration of std::vector of 5 threads. I attach all threads respectively with their task (threadTask method). Each thread will manipulate a std::vector<int> instance. I join all threads. I print the new state of my 5x5 matrix. Here's the output : 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 It should be : 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 0 0 0 0 0 1 1 1 1 1 2 2 2 2 2 3 3 3 3 3 4 4 4 4 4 Here's the code sample : #include <iostream> #include <vector> #include <thread> class Toto { public: /* ** Initialize a 5x5 matrix with the 42 value. */ void initData(void) { for (int y = 0; y < 5; y++) { std::vector<int> vec; for (int x = 0; x < 5; x++) { vec.push_back(42); } this->m_data.push_back(vec); } } /* ** Display the whole matrix. */ void printData(void) const { for (int y = 0; y < 5; y++) { for (int x = 0; x < 5; x++) { printf("%d ", this->m_data[y][x]); } printf("\n"); } printf("\n"); } /* ** Function attached to the thread (thread task). ** Replace the original '42' value by another one. */ void threadTask(std::vector<int> &list, int value) { for (int x = 0; x < 5; x++) { list[x] = value; } } /* ** Return the m_data instance propertie. */ std::vector<std::vector<int> > &getData(void) { return (this->m_data); } private: std::vector<std::vector<int> > m_data; }; int main(void) { Toto toto; toto.initData(); toto.printData(); //Display the original 5x5 matrix (first display). std::vector<std::thread> threadList(5); //Initialization of vector of 5 threads. for (int i = 0; i < 5; i++) { //Threads initializationss std::vector<int> vec = toto.getData()[i]; //Get each sub-vectors. threadList.at(i) = std::thread(&Toto::threadTask, toto, vec, i); //Each thread will be attached to a specific vector. } for (int j = 0; j < 5; j++) { threadList.at(j).join(); } toto.printData(); //Second display. getchar(); return (0); } However, in the method threadTask, if I print the variable list[x], the output is correct. I think I can't print the correct data in the main because the printData() call is in the main thread and the display in the threadTask function is correct because the method is executed in its own thread (not the main one). It's strange, it means that all threads created in a parent processes can't modified the data in this parent processes ? I think I forget something in my code. I'm really lost. Does anyone can help me, please ? Thank a lot in advance for your help.

  Read the article

• Qt : crash due to delete (trying to handle exceptions...)

  - by Seub

  I am writing a program with Qt, and I would like it to show a dialog box with a Exit | Restart choice whenever an error is thrown somewhere in the code. What I did causes a crash and I really can't figure out why it happens, I was hoping you could help me understanding what's going on. Here's my main.cpp: #include "my_application.hpp" int main(int argc, char *argv[]) { std::cout << std::endl; My_Application app(argc, argv); return app.exec(); } And here's my_application:hpp: #ifndef MY_APPLICATION_HPP #define MY_APPLICATION_HPP #include <QApplication> class Window; class My_Application : public QApplication { public: My_Application(int& argc, char ** argv); virtual ~My_Application(); virtual bool notify(QObject * receiver, QEvent * event); private: Window *window_; void exit(); void restart(); }; #endif // MY_APPLICATION_HPP Finally, here's my_application.cpp: #include "my_application.hpp" #include "window.hpp" #include <QMessageBox> My_Application::My_Application(int& argc, char ** argv) : QApplication(argc, argv) { window_ = new Window; window_->setAttribute(Qt::WA_DeleteOnClose, false); window_->show(); } My_Application::~My_Application() { delete window_; } bool My_Application::notify(QObject * receiver, QEvent * event) { try { return QApplication::notify(receiver, event); } catch(QString error_message) { window_->setEnabled(false); QMessageBox message_box; message_box.setWindowTitle("Error"); message_box.setIcon(QMessageBox::Critical); message_box.setText("The program caught an unexpected error:"); message_box.setInformativeText("What do you want to do? <br>"); QPushButton *restart_button = message_box.addButton(tr("Restart"), QMessageBox::RejectRole); QPushButton *exit_button = message_box.addButton(tr("Exit"), QMessageBox::RejectRole); message_box.setDefaultButton(restart_button); message_box.exec(); if ((QPushButton *) message_box.clickedButton() == exit_button) { exit(); } else if ((QPushButton *) message_box.clickedButton() == restart_button) { restart(); } } return false; } void My_Application::exit() { window_->close(); //delete window_; return; } void My_Application::restart() { window_->close(); //delete window_; window_ = new Window; window_->show(); return; } Note that the line window_->setAttribute(Qt::WA_DeleteOnClose, false); means that window_ (my main window) won't be deleted when it is closed. The code I've written above works, but as far as I understand, there's a memory leak: I should uncomment the line //delete window_; in My_Application::exit() and My_Application::restart(). But when I do that, the program crashes when I click restart (or exit but who cares). (I'm not sure this is useful, in fact it might be misleading, but here's what my debugger tells me: a segmentation fault occurs in QWidgetPrivate::PaintOnScreen() const which is called by a function called by a function... called by My_Application::notify()) When I do some std::couts, I notice that the program runs through the entire restart() function and in fact through the entire notify() function before it crashes. I have no idea why it crashes. Thanks in advance for your insights! Update: I've noticed that My_Application::notify() is called very often. For example, it is called a bunch of times while the error dialog box is open, also during the execution of the restart function. The crash actually occurs in the subfunction QApplication::notify(receiver, event). This is not too surprising in light of the previous remark (the receiver has probably been deleted) But even if I forbid the function My_Application::notify() to do anything while restart() is executed, it still crashes (after having called My_Application::notify() a bunch of times, like 15 times, isn't that weird)? How should I proceed? Maybe I should say (to make the question slightly more relevant) that my class My_Application also has a "restore" function, which I've not copied here to try to keep things short. If I just had that restart feature I wouldn't bother too much, but I do want to have that restore feature. I should also say that if I keep the code with the "delete window_" commented, the problem is not only a memory leak, it still crashes sometimes apparently. There must surely be a way to fix this! But I'm clueless, I'd really appreciate some help! Thanks in advance.

  Read the article

• error - inherited class field undeclared according to g++

  - by infoholic_anonymous

  I have a code that has the following logic. g++ gives me the error that I have not declared n in my iterator2. What could be wrong? template <typename T> class List{ template <typename TT> class Node; Node<T> *head; /* (...) */ template <bool D> class iterator1{ protected: Node<T> n; public: iterator1( Node<T> *nn ) { n = nn } /* (...) */ }; template <bool D> class iterator2 : public iterator1<D>{ public: iterator2( Node<T> *nn ) : iterator1<D>( nn ) {} void fun( Node<T> *nn ) { n = nn; } /* (...) */ }; }; EDIT : I attach the actual header file. iterator1 would be iterable_frame and iterator2 - switchable_frame. #ifndef LST_H #define LST_H template <typename T> class List { public: template <typename TT> class Node; private: Node<T> *head; public: List() { head = new Node<T>; } ~List() { empty_list(); delete head; } List( const List &l ); inline bool is_empty() const { return head->next[0] == head; } void empty_list(); template <bool DIM> class iterable_frame { protected: Node<T> *head; Node<T> **caret; public: iterable_frame( const List &l ) { head = *(caret = &l.head); } iterable_frame( const iterable_frame &i ) { head = *(caret = i.caret); } ~iterable_frame() {} /* (...) - a few methods follow */ template <bool _DIM> friend class supervised_frame; }; template <bool DIM> class switchable_frame : public iterable_frame<DIM> { Node<T> *main_head; public: switchable_frame( const List& l ) : iterable_frame<DIM>(l) { main_head = head; } inline bool next_frame() { caret = &head->next[!DIM]; head = *caret; return head != main_head; } }; template <bool DIM> class supervised_frame { iterable_frame<DIM> sentinels; iterable_frame<DIM> cells; public: supervised_frame( const List &l ) : sentinels(l), cells(l) {} ~supervised_frame() {} /* (...) - a few methods follow */ }; template <typename TT> class Node { unsigned index[2]; TT num; Node<TT> *next[2]; public: Node( unsigned x = 0, unsigned y = 0 ) { index[0]=x; index[1]=y; next[0] = this; next[1] = this; } Node( unsigned x, unsigned y, TT d ) { index[0]=x; index[1]=y; num=d; next[0] = this; next[1] = this; } Node( const Node &n ) { index[0] = n.index[0]; index[1] = n.index[1]; num = n.num; next[0] = next[1] = this; } ~Node() {} friend class List; }; }; #include "List.cpp" #endif the exact error log is the following: In file included from main.cpp:1: List.h: In member function ‘bool List<T>::switchable_frame<DIM>::next_frame()’: List.h:77: error: ‘caret’ was not declared in this scope

  Read the article

• SSRS Export to Excel not working through VPN (Juniper SA4000)

  - by Veynom

  We have a SharePoint (MOSS 2007 on Win2003 R2) with SSRS reports (from SQL 2005) embedded in it. When we connect to the SharePoint portal through our VPN (firewall is Juniper SA4000) and using Internet Explorer (6, 7, and 8) and try to export any SSRS report under Excel, we get an error message: Internet Explorer cannot download . Internet Explorer was not able to open the internet site. The requested site is either unavailable or cannot be found. Please try again later. When not using the VPN (LAN from the office), everything (exporting under Excel) works fine. When using Firefox through the VPN, it works fine. When exporting to any other format (pdf or text or whatever), everything is fine under both IE and FF. Our firewall people suspect something in SSRS/MOSS/Office. Our MOSS consultants suspect something in the firewall Juniper SA4000. When using Fiddler and when not connected through VPN, I see the following traffic once i click on the "Export button": (Response was a request for client credentials) GET /ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=j1pqbvbqkb34qf45fhlgnx55&ControlID=733607a7d607476abb1e6b8794202158&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL HTTP/1.1 Accept: */* Accept-Language: en-US,fr-be;q=0.5 User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB5; .NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.2; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; MS-RTC LM 8; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: r1frchcurdb01.r1.group.corp HTTP/1.1 401 Unauthorized Content-Length: 1656 Content-Type: text/html Server: Microsoft-IIS/6.0 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM X-Powered-By: ASP.NET Date: Mon, 08 Jun 2009 09:25:21 GMT Proxy-Support: Session-Based-Authentication then (Generic Response successful): GET /ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=j1pqbvbqkb34qf45fhlgnx55&ControlID=733607a7d607476abb1e6b8794202158&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL HTTP/1.1 Accept: */* Accept-Language: en-US,fr-be;q=0.5 User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB5; .NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.2; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; MS-RTC LM 8; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: r1frchcurdb01.r1.group.corp Authorization: Negotiate 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 HTTP/1.1 200 OK Date: Mon, 08 Jun 2009 09:25:21 GMT Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET WWW-Authenticate: Negotiate oYGgMIGdoAMKAQChCwYJKoZIgvcSAQICooGIBIGFYIGCBgkqhkiG9xIBAgICAG9zMHGgAwIBBaEDAgEPomUwY6ADAgEXolwEWm70xlMp4oj/PyvriNMeNDigow6/MX2DpaYQdBfGkiF0Dcc323tHLRBxBL03QpvwdGBxZGAJI6V1G8sc/lVBzhlCNsZkbJcNfnMNgOgc7UPrz+ZVav/EVm3sDQ== X-AspNet-Version: 2.0.50727 Content-Disposition: attachment; filename="Product Application Report.xls" Cache-Control: private Expires: Mon, 08 Jun 2009 09:24:21 GMT Content-Type: application/vnd.ms-excel Content-Length: 23012 When using the VPN, I see no traffic in Fiddler and the error message is displayed before anything else. Update 17/06/2009: I could get a hand on some logs from our SA4000. Maybe this could help more. Info PTR23232 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Start Policy [WEBURL/PROTOCOL] evaluation for resource http://<DB server>:80/ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=rua1g355tic24245f2e13lim&ControlID=44168efcd36e461493f7a69962580b91&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL Info PTR23233 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Applying Policy [Enable HTTP 1.1]... Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://nsrvnts2:80/*] does not match Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://nsrvnts3:80/*] does not match Info PTR23233 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Applying Policy [Disable HTTP 1.1]... Info PTR23239 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Action [HTTP 1.0] is returned Info PTR23234 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Policy [Disable HTTP 1.1] applies to resource Info PTR23308 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Skip Policy [WEBURL/COMPRESSION] evaluation because Compression option is not enabled Info PTR23232 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Start Policy [WEBURL/WEBPDSID] evaluation for resource http://<DB server>:80/ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=rua1g355tic24245f2e13lim&ControlID=44168efcd36e461493f7a69962580b91&Culture=127&UICulture=9&ReportStack=1&OpType=Export&FileName=Product+Application+Report&ContentDisposition=OnlyHtmlInline&Format=EXCEL Info PTR23233 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Applying Policy [Corporate BI Portal]... Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://<SharePoint>:80/*] does not match Info PTR23240 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - Resource filter [http://<SharePoint>/*] does not match Info PTR23235 2009/06/15 17:22:38 - <SA4000> - [<SA4000 IP>] - <user>[SA4000 group names] - No Policy applies to resource Any tip welcome. :)

  Read the article

• ERR_INCOMPLETE_CHUNKED_ENCODING apache 2.4

  - by Bujanca Mihai

  I upgraded my Ubuntu server to 14.04 and Apache 2.4.7. Now my images don't load and console yields net::ERR_INCOMPLETE_CHUNKED_ENCODING. Also, I can sometimes see some of the images load for a little while (1 sec max) and then they disappear. .htaccess RewriteEngine On # Serve the favicon file from img folder RewriteCond %{REQUEST_URI} ^/favicon.ico$ RewriteRule ^(.*)$ /img/$1 [NC,L] # Redirect HTTP traffic to WWW subdomain RewriteCond %{HTTPS} off [NC] RewriteCond %{HTTP_HOST} !^www\. [NC] RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] # Redirect HTTPS traffic to WWW subdomain RewriteCond %{HTTPS} on [NC] RewriteCond %{HTTP_HOST} !^www\. [NC] RewriteRule ^(.*)$ https://www.%{HTTP_HOST}/$1 [R=301,L] # Auto Versioning rules RewriteCond %{REQUEST_FILENAME} !-s RewriteRule ^(.*)\.[\d]+\.(css|js)$ $1.$2 [L] # Default Zend rewrite rules RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] VHost <VirtualHost *:80> ServerAdmin admin@localhost ServerName localhost DocumentRoot /home/mihai/ARTD/www/public/website # Omit this in production environment SetEnv APPLICATION_ENV local <Directory /home/mihai/ARTD/www/public/website > Options Indexes FollowSymLinks MultiViews AllowOverride All #Order deny,allow #Allow from all Require all granted </Directory> <IfModule mod_php5.c> php_value memory_limit 128M php_value upload_max_filesize 20M php_value post_max_size 20M </IfModule> ErrorLog /var/log/apache2/ARTD-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/ARTD-access.log combined </VirtualHost> <IfModule mod_ssl.c> <VirtualHost *:443> ServerAdmin admin@localhost ServerName localhost DocumentRoot /home/mihai/ARTD/www/public/website # Omit this in production environment SetEnv APPLICATION_ENV local <Directory /home/mihai/ARTD/www/public/website > Options Indexes FollowSymLinks MultiViews AllowOverride All #Order deny,allow #Allow from all Require all granted </Directory> <IfModule mod_php5.c> php_value memory_limit 128M php_value upload_max_filesize 20M php_value post_max_size 20M </IfModule> ErrorLog /var/log/apache2/ARTD-ssl-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/ARTD.log combined # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire #<FilesMatch "\.(cgi|shtml|phtml|php)$"> # SSLOptions +StdEnvVars #</FilesMatch> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. #BrowserMatch ".*MSIE.*" \ # nokeepalive ssl-unclean-shutdown \ # downgrade-1.0 force-response-1.0 </VirtualHost> </IfModule> logs Apache/2.4.7 (Ubuntu) PHP/5.5.9-1ubuntu4.3 OpenSSL/1.0.1f (internal dummy connection) 127.0.0.1 - - [25/Aug/2014:13:09:53 +0300] "GET /img/header/top-nav-separator.png HTTP/1.1" 200 462 "https://localhost/art" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/34.0.1847.132 Safari/537.36"

  Read the article

• OpenSwan IPsec connection drops after 30 seconds

  - by drcore

  I'm trying to connection from my Linux Mint 16 box to a CloudStack server. Building up the connection works (pings work across the tunnel). However 30 seconds later the IPsec tunnel gets terminated out of the blue. What could cause this consistent behaviour and how to fix it? The tunnel is setup using OpenSwan (U2.6.38/K(no kernel code presently loaded)) with the L2TP IPsec VPN manager from Werner Jaeger 1.0.9. The client is behind a NAT'ed router and the server is on public IP (CloudStack 4.2) Running ipsec verify complains about IPsec support in kernel. Not sure if this is a problem as the connection is being build up: Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K(no kernel code presently loaded) Checking for IPsec support in kernel [FAILED] SAref kernel support [N/A] Checking that pluto is running [FAILED] whack: Pluto is not running (no "/var/run/pluto/pluto.ctl") Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] Tunnel config: version 2.0 # conforms to second version of ipsec.conf specification config setup # plutodebug="parsing emitting control private" plutodebug=none strictcrlpolicy=no nat_traversal=yes interfaces=%defaultroute oe=off # which IPsec stack to use. netkey,klips,mast,auto or none protostack=netkey conn %default keyingtries=3 pfs=no rekey=yes type=transport left=%defaultroute leftprotoport=17/1701 rightprotoport=17/1701 conn Tunnel1 authby=secret right=37.48.75.97 rightid="" auto=add Log file of VPN connection build up: aug. 23 17:12:54.708 ipsec_setup: Starting Openswan IPsec U2.6.38/K3.11.0-12-generic... aug. 23 17:12:55.155 ipsec_setup: multiple ip addresses, using 192.168.178.32 on eth0 aug. 23 17:12:55.165 ipsec__plutorun: Starting Pluto subsystem... aug. 23 17:12:55.174 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d aug. 23 17:12:55.177 recvref[30]: Protocol not available aug. 23 17:12:55.177 xl2tpd[14339]: This binary does not support kernel L2TP. aug. 23 17:12:55.178 Starting xl2tpd: xl2tpd. aug. 23 17:12:55.178 xl2tpd[14345]: xl2tpd version xl2tpd-1.3.1 started on desktopmint PID:14345 aug. 23 17:12:55.178 xl2tpd[14345]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. aug. 23 17:12:55.179 xl2tpd[14345]: Forked by Scott Balmos and David Stipp, (C) 2001 aug. 23 17:12:55.179 xl2tpd[14345]: Inherited by Jeff McAdams, (C) 2002 aug. 23 17:12:55.179 xl2tpd[14345]: Forked again by Xelerance (www.xelerance.com) (C) 2006 aug. 23 17:12:55.180 xl2tpd[14345]: Listening on IP address 0.0.0.0, port 1701 aug. 23 17:12:55.214 ipsec__plutorun: 002 added connection description "Tunnel1" aug. 23 17:13:15.532 104 "Tunnel1" #1: STATE_MAIN_I1: initiate aug. 23 17:13:15.532 003 "Tunnel1" #1: ignoring unknown Vendor ID payload [4f45755c645c6a795c5c6170] aug. 23 17:13:15.532 003 "Tunnel1" #1: received Vendor ID payload [Dead Peer Detection] aug. 23 17:13:15.533 003 "Tunnel1" #1: received Vendor ID payload [RFC 3947] method set to=115 aug. 23 17:13:15.533 106 "Tunnel1" #1: STATE_MAIN_I2: sent MI2, expecting MR2 aug. 23 17:13:15.534 003 "Tunnel1" #1: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): i am NATed aug. 23 17:13:15.534 108 "Tunnel1" #1: STATE_MAIN_I3: sent MI3, expecting MR3 aug. 23 17:13:15.534 010 "Tunnel1" #1: STATE_MAIN_I3: retransmission; will wait 20s for response aug. 23 17:13:15.545 003 "Tunnel1" #1: received Vendor ID payload [CAN-IKEv2] aug. 23 17:13:15.547 004 "Tunnel1" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_128 prf=oakley_sha group=modp2048} aug. 23 17:13:15.547 117 "Tunnel1" #2: STATE_QUICK_I1: initiate aug. 23 17:13:15.547 010 "Tunnel1" #2: STATE_QUICK_I1: retransmission; will wait 20s for response aug. 23 17:13:15.548 004 "Tunnel1" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x0ecef28b <0x3e1fbe3b xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} aug. 23 17:13:16.549 xl2tpd[14345]: Connecting to host <VPN gateway>, port 1701 aug. 23 17:13:18.576 xl2tpd[14345]: Connection established to <VPN gateway>, 1701. Local: 21163, Remote: 12074 (ref=0/0). aug. 23 17:13:18.576 xl2tpd[14345]: Calling on tunnel 21163 aug. 23 17:13:18.577 xl2tpd[14345]: check_control: Received out of order control packet on tunnel 12074 (got 0, expected 1) aug. 23 17:13:18.577 xl2tpd[14345]: handle_packet: bad control packet! aug. 23 17:13:18.577 xl2tpd[14345]: check_control: Received out of order control packet on tunnel 12074 (got 0, expected 1) aug. 23 17:13:18.577 xl2tpd[14345]: handle_packet: bad control packet! aug. 23 17:13:18.599 xl2tpd[14345]: Call established with <VPN gateway>, Local: 39035, Remote: 57266, Serial: 1 (ref=0/0) aug. 23 17:13:18.605 xl2tpd[14345]: start_pppd: I'm running: aug. 23 17:13:18.605 xl2tpd[14345]: "/usr/sbin/pppd" aug. 23 17:13:18.606 xl2tpd[14345]: "passive" aug. 23 17:13:18.606 xl2tpd[14345]: "nodetach" aug. 23 17:13:18.606 xl2tpd[14345]: ":" aug. 23 17:13:18.606 xl2tpd[14345]: "file" aug. 23 17:13:18.606 xl2tpd[14345]: "/etc/ppp/Tunnel1.options.xl2tpd" aug. 23 17:13:18.606 xl2tpd[14345]: "ipparam" aug. 23 17:13:18.607 xl2tpd[14345]: "<VPN gateway>" aug. 23 17:13:18.607 xl2tpd[14345]: "/dev/pts/4" aug. 23 17:13:18.607 pppd[14438]: Plugin passprompt.so loaded. aug. 23 17:13:18.607 pppd[14438]: pppd 2.4.5 started by root, uid 0 aug. 23 17:13:18.608 pppd[14438]: Using interface ppp0 aug. 23 17:13:18.608 pppd[14438]: Connect: ppp0 <--> /dev/pts/4 aug. 23 17:13:21.650 pppd[14438]: CHAP authentication succeeded: Access granted aug. 23 17:13:21.651 pppd[14438]: CHAP authentication succeeded aug. 23 17:13:21.692 pppd[14438]: local IP address 10.1.2.2 aug. 23 17:13:21.693 pppd[14438]: remote IP address 10.1.2.1 aug. 23 17:13:21.693 pppd[14438]: primary DNS address 10.1.2.1 aug. 23 17:13:21.694 pppd[14438]: secondary DNS address 10.1.2.1 aug. 23 17:13:46.528 Stopping xl2tpd: xl2tpd. aug. 23 17:13:46.528 xl2tpd[14345]: death_handler: Fatal signal 15 received aug. 23 17:13:46.529 pppd[14438]: Modem hangup aug. 23 17:13:46.529 pppd[14438]: Connect time 0.5 minutes. aug. 23 17:13:46.529 pppd[14438]: Sent 1866 bytes, received 1241 bytes. aug. 23 17:13:46.529 pppd[14438]: Connection terminated. aug. 23 17:13:46.562 ipsec_setup: Stopping Openswan IPsec... aug. 23 17:13:46.576 pppd[14438]: Exit.

  Read the article

• Spam Assassin on windows

  - by ebeworld

  I just installed spam assassin and run for its sample ham mail as spamassassin sample-nonspam.txt, but it ended up marking it as a spam. What configuration am i missing to change? Result of the check is: From: Keith Dawson To: [email protected] Subject: **SPAM** TBTF ping for 2001-04-20: Reviving Date: Fri, 20 Apr 2001 16:59:58 -0400 Message-Id: X-Spam-Flag: YES X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on ebeworld-PC X-Spam-Level: **** X-Spam-Status: Yes, score=10.5 required=6.3 tests=DCC_CHECK,DIGEST_MULTIPLE, DNS_FROM_OPENWHOIS,RAZOR2_CF_RANGE_51_100,RAZOR2_CF_RANGE_E4_51_100, RAZOR2_CHECK shortcircuit=no autolearn=no version=3.2.3 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----------=_4BF17E8E.BF8E0000" This is a multi-part message in MIME format. ------------=_4BF17E8E.BF8E0000 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit This mail is probably spam. The original message has been attached intact in RFC 822 format. Content preview: -----BEGIN PGP SIGNED MESSAGE----- TBTF ping for 2001-04-20: Reviving T a s t y B i t s f r o m t h e T e c h n o l o g y F r o n t [...] Content analysis details: (10.5 points, 6.3 required) 2.4 DNS_FROM_OPENWHOIS RBL: Envelope sender listed in bl.open-whois.org. 1.5 RAZOR2_CF_RANGE_E4_51_100 Razor2 gives engine 4 confidence level above 50% [cf: 58] 2.5 RAZOR2_CHECK Listed in Razor2 (http://razor.sf.net/) 0.5 RAZOR2_CF_RANGE_51_100 Razor2 gives confidence level above 50% [cf: 58] 3.6 DCC_CHECK Listed in DCC (http://rhyolite.com/anti-spam/dcc/) 0.0 DIGEST_MULTIPLE Message hits more than one network digest check ------------=_4BF17E8E.BF8E0000 Content-Type: message/rfc822; x-spam-type=original Content-Description: original message before SpamAssassin Content-Disposition: inline Content-Transfer-Encoding: 8bit Return-Path: Delivered-To: [email protected] Received: from europe.std.com (europe.std.com [199.172.62.20]) by mail.netnoteinc.com (Postfix) with ESMTP id 392E1114061 for ; Fri, 20 Apr 2001 21:34:46 +0000 (Eire) Received: (from daemon@localhost) by europe.std.com (8.9.3/8.9.3) id RAA09630 for tbtf-outgoing; Fri, 20 Apr 2001 17:31:18 -0400 (EDT) Received: from sgi04-e.std.com (sgi04-e.std.com [199.172.62.134]) by europe.std.com (8.9.3/8.9.3) with ESMTP id RAA08749 for ; Fri, 20 Apr 2001 17:24:31 -0400 (EDT) Received: from world.std.com (world-f.std.com [199.172.62.5]) by sgi04-e.std.com (8.9.3/8.9.3) with ESMTP id RAA8278330 for ; Fri, 20 Apr 2001 17:24:31 -0400 (EDT) Received: (from dawson@localhost) by world.std.com (8.9.3/8.9.3) id RAA26781 for [email protected]; Fri, 20 Apr 2001 17:24:31 -0400 (EDT) Received: from sgi04-e.std.com (sgi04-e.std.com [199.172.62.134]) by europe.std.com (8.9.3/8.9.3) with ESMTP id RAA07541 for ; Fri, 20 Apr 2001 17:12:06 -0400 (EDT) Received: from world.std.com (world-f.std.com [199.172.62.5]) by sgi04-e.std.com (8.9.3/8.9.3) with ESMTP id RAA8416421 for ; Fri, 20 Apr 2001 17:12:06 -0400 (EDT) Received: from [208.192.102.193] (ppp0c199.std.com [208.192.102.199]) by world.std.com (8.9.3/8.9.3) with ESMTP id RAA14226 for ; Fri, 20 Apr 2001 17:12:04 -0400 (EDT) Mime-Version: 1.0 Message-Id: Date: Fri, 20 Apr 2001 16:59:58 -0400 To: [email protected] From: Keith Dawson Subject: TBTF ping for 2001-04-20: Reviving Content-Type: text/plain; charset="us-ascii" Sender: [email protected] Precedence: list Reply-To: [email protected] -----BEGIN PGP SIGNED MESSAGE----- TBTF ping for 2001-04-20: Reviving T a s t y B i t s f r o m t h e T e c h n o l o g y F r o n t Timely news of the bellwethers in computer and communications technology that will affect electronic commerce -- since 1994 Your Host: Keith Dawson ISSN: 1524-9948 This issue: < http://tbtf.com/archive/2001-04-20.html > To comment on this issue, please use this forum at Quick Topic: < http://www.quicktopic.com/tbtf/H/kQGJR2TXL6H > ________________________________________________________________________ Q u o t e O f T h e M o m e n t Even organizations that promise "privacy for their customers" rarely if ever promise "continued privacy for their former customers..." Once you cancel your account with any business, their promises of keeping the information about their customers private no longer apply... you're not a customer any longer. This is in the large category of business behaviors that individuals would consider immoral and deceptive -- and businesses know are not illegal. -- "_ankh," writing on the XNStalk mailing list ________________________________________________________________________ ..TBTF's long hiatus is drawing to a close Hail subscribers to the TBTF mailing list. Some 2,000 [1] of you have signed up since the last issue [2] was mailed on 2000-07-20. This brief note is the first of several I will send to this list to excise the dead addresses prior to resuming regular publication. While you time the contractions of the newsletter's rebirth, I in- vite you to read the TBTF Log [3] and sign up for its separate free subscription. Send "subscribe" (no quotes) with any subject to [email protected] . I mail out collected Log items on Sun- days. If you need to stay more immediately on top of breaking stories, pick up the TBTF Log's syndication file [4] or read an aggregator that does. Examples are Slashdot's Cheesy Portal [5], Userland [6], and Sitescooper [7]. If your news obsession runs even deeper and you own an SMS-capable cell phone or PDA, sign up on TBTF's WebWire- lessNow portal [8]. A free call will bring you the latest TBTF Log headline, Jargon Scout [9] find, or Siliconium [10]. Two new columnists have bloomed on TBTF since last summer: Ted By- field's roving_reporter [11] and Gary Stock's UnBlinking [12]. Late- ly Byfield has been writing in unmatched depth about ICANN, but the roving_reporter nym's roots are in commentary at the intersection of technology and culture. Stock's UnBlinking latches onto topical sub- jects and pursues them to the ends of the Net. These writers' voices are compelling and utterly distinctive. [1] http://tbtf.com/growth.html [2] http://tbtf.com/archive/2000-07-20.html [3] http://tbtf.com/blog/ [4] http://tbtf.com/tbtf.rdf [5] http://www.slashdot.org/cheesyportal.shtml [6] http://my.userland.com/ [7] http://www.sitescooper.org/ [8] http://tbtf.com/pull-wwn/ [9] http://tbtf.com/jargon-scout.html [10] http://tbtf.com/siliconia.html [11] http://tbtf.com/roving_reporter/ [12] http://tbtf.com/unblinking/ ________________________________________________________________________ S o u r c e s For a complete list of TBTF's email and Web sources, see http://tbtf.com/sources.html . ________________________________________ B e n e f a c t o r s TBTF is free. If you get value from this publication, please visit the TBTF Benefactors page < http://tbtf.com/the-benefactors.html > and consider contributing to its upkeep. ________________________________________________________________________ TBTF home and archive at http://tbtf.com/ . To unsubscribe send the message "unsubscribe" to [email protected]. TBTF is Copy- right 1994-2000 by Keith Dawson, <[email protected]>. Commercial use prohibited. For non-commercial purposes please forward, post, and link as you see fit. _______________________________________________ Keith Dawson [email protected] Layer of ash separates morning and evening milk. -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.2 for non-commercial use http://www.pgp.com iQCVAwUBOuCi3WAMawgf2iXRAQHeAQQA3YSePSQ0XzdHZUVskFDkTfpE9XS4fHQs WaT6a8qLZK9PdNcoz3zggM/Jnjdx6CJqNzxPEtxk9B2DoGll/C/60HWNPN+VujDu Xav65S0P+Px4knaQcCIeCamQJ7uGcsw+CqMpNbxWYaTYmjAfkbKH1EuLC2VRwdmD wQmwrDp70v8= =8hLB -----END PGP SIGNATURE----- ------------=_4BF17E8E.BF8E0000--

  Read the article

• Need help in setting lighttpd on Ubuntu 9.10

  - by hap497

  Hi, I am trying to run lighttpd on Ubuntu 9.10. I get the conf file from the doc directory of lighttpd source. $ sudo ./lighttpd -f lighttpd.conf $ ps -ef | grep lighttpd root 2094 1 0 19:40 ? 00:00:00 ./lighttpd -f lighttpd.conf This is my lighttpd.conf: $ more lighttpd.conf # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", # "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) #server.port = 81 ## bind to localhost (default: all interfaces) #server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.s ocket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "ac cess plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 When I go to browser and hit 'http://127.0.0.1', I get link not found. Any idea?

  Read the article

• OWA, Outlook Anywhere, RPCPing Inconsistencies

  - by pk.

  I'm troubleshooting an Outlook Anywhere issue with a new Exchange 2010 server. The server in question, MS2010, is behind a SonicWALL NSA 2400 device and works wonderfully except for Outlook Anywhere. Outlook Anywhere works internally and I've verified (through Ctrl-Right Click --> Connection Status) that I'm able to connect to MS2010 over HTTPS. When trying to connect to the server using HTTPS from outside the firewall, I'm unable to do so. A Wireshark trace shows 30 or so successful HTTPS packet transmissions, and then it fails with 3 straight transmissions to a destination port of 135. I have no idea why my computer is attempting to access anything on port 135 since I've setup my profile to use HTTPS on both slow and fast connections. I'm 99% certain that the firewall is configured correctly. I run Outlook Web Access (also HTTPS) on the same server and there are no issues with access. EDIT: My Autodiscover settings are correct (as far as I can tell). My server passes the Outlook Anywhere and Autodiscover tests at https://www.testexchangeconnectivity.com/. I've been using the RPCPing utility to troubleshoot and have come across the following results: Internally- >rpcping -t ncacn_http -s mail.mydomain.com -o RpcProxy=mail.mydomain.com -P "pk,mydomain,*" -I "pk,mydomain,*" -H 1 -u 10 -a connect -F 3 -v 3 -E -R none RPCPing v2.12. Copyright (C) Microsoft Corporation, 2002 OS Version is: 6.1, Service Pack 1 RPCPinging proxy server mail.mydomain.com with Echo Request Packet Sending ping to server Response from server received: 200 Pinging successfully completed in 93 ms Externally- >rpcping -t ncacn_http -s mail.mydomain.com -o RpcProxy=mail.mydomain.com -P "pk,mydomain,*" -I "pk,mydomain,*" -H 1 -u 10 -a connect -F 3 -v 3 -E -R none RPCPing v6.0. Copyright (C) Microsoft Corporation, 2002-2006 Enter password for RPC/HTTP proxy: RPCPing set Activity ID: {fc8411ba-2987-4175-b37b-801dc69d5ff9} RPCPinging proxy server mail.mydomain.com with Echo Request Packet Setting autologon policy to high WinHttpSetCredentials for target server called Error 87 : The parameter is incorrect. returned in WinHttpSetCredentials Ping failed What should I be checking in order to troubleshoot my Outlook Anywhere issues? I'm using Windows 7 SP1 for internal and external access. EDIT: Autodiscover.xml content <?xml version="1.0"?> <Autodiscover xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006"> <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a"> <User> <DisplayName>John Doe</DisplayName> <LegacyDN>/o=MYDOMAIN/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=pk</LegacyDN> <DeploymentId>d35170cc-f3a7-42c5-9427-1f554a469126</DeploymentId> </User> <Account> <AccountType>email</AccountType> <Action>settings</Action> <Protocol> <Type>EXCH</Type> <Server>MS2010.MYDOMAIN.local</Server> <ServerDN>/o=MYDOMAIN/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=MS2010</ServerDN> <ServerVersion>738180DA</ServerVersion> <MdbDN>/o=MYDOMAIN/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=MS2010/cn=Microsoft Private MDB</MdbDN> <ASUrl>https://MS2010.MYDOMAIN.local/EWS/Exchange.asmx</ASUrl> <OOFUrl>https://MS2010.MYDOMAIN.local/EWS/Exchange.asmx</OOFUrl> <OABUrl>http://MS2010.MYDOMAIN.local/OAB/2c34c9f5-5521-4c8c-b684-538df815052a/</OABUrl> <UMUrl>https://MS2010.MYDOMAIN.local/EWS/UM2007Legacy.asmx</UMUrl> <Port>0</Port> <DirectoryPort>0</DirectoryPort> <ReferralPort>0</ReferralPort> <PublicFolderServer>MS2007.MYDOMAIN.local</PublicFolderServer> <AD>dc1.MYDOMAIN.local</AD> <EwsUrl>https://MS2010.MYDOMAIN.local/EWS/Exchange.asmx</EwsUrl> <EcpUrl>https://MS2010.MYDOMAIN.local/ecp/</EcpUrl> <EcpUrl-um>?p=customize/voicemail.aspx&amp;exsvurl=1</EcpUrl-um> <EcpUrl-aggr>?p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1</EcpUrl-aggr> <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;</EcpUrl-mt> <EcpUrl-ret>?p=organize/retentionpolicytags.slab&amp;exsvurl=1</EcpUrl-ret> <EcpUrl-sms>?p=sms/textmessaging.slab&amp;exsvurl=1</EcpUrl-sms> </Protocol> <Protocol> <Type>EXPR</Type> <Server>mail.mycompany.com</Server> <ASUrl>https://mail.mycompany.com/ews/exchange.asmx</ASUrl> <OOFUrl>https://mail.mycompany.com/ews/exchange.asmx</OOFUrl> <OABUrl>https://mail.mycompany.com/OAB/2c34c9f5-5521-4c8c-b684-538df815052a/</OABUrl> <UMUrl>https://mail.mycompany.com/ews/UM2007Legacy.asmx</UMUrl> <Port>0</Port> <DirectoryPort>0</DirectoryPort> <ReferralPort>0</ReferralPort> <SSL>On</SSL> <AuthPackage>Basic</AuthPackage> <CertPrincipalName>msstd:mail.mycompany.com</CertPrincipalName> <EwsUrl>https://mail.mycompany.com/ews/exchange.asmx</EwsUrl> <EcpUrl>https://mail.mycompany.com/owa/</EcpUrl> <EcpUrl-um>?p=customize/voicemail.aspx&amp;exsvurl=1</EcpUrl-um> <EcpUrl-aggr>?p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1</EcpUrl-aggr> <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;</EcpUrl-mt> <EcpUrl-ret>?p=organize/retentionpolicytags.slab&amp;exsvurl=1</EcpUrl-ret> <EcpUrl-sms>?p=sms/textmessaging.slab&amp;exsvurl=1</EcpUrl-sms> </Protocol> <Protocol> <Type>WEB</Type> <Port>0</Port> <DirectoryPort>0</DirectoryPort> <ReferralPort>0</ReferralPort> <Internal> <OWAUrl AuthenticationMethod="Basic, Fba">https://MS2010.MYDOMAIN.local/owa/</OWAUrl> <Protocol> <Type>EXCH</Type> <ASUrl>https://MS2010.MYDOMAIN.local/EWS/Exchange.asmx</ASUrl> </Protocol> </Internal> <External> <OWAUrl AuthenticationMethod="Fba">https://mail.mycompany.com/owa/</OWAUrl> <Protocol> <Type>EXPR</Type> <ASUrl>https://mail.mycompany.com/ews/exchange.asmx</ASUrl> </Protocol> </External> </Protocol> </Account> </Response> </Autodiscover>

  Read the article

• How to configure fastcgi to work with ligttpd in ubuntu

  - by michael

  I am able to run lighttpd on ubuntu 9.10. But when i tried to setup fastcgi with lighttpd by putting this in the ligttpd.conf file: #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => "9098", "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", "docroot" => "/" # remote server may use # it's own docroot )) ) This is what I get in the error.log in ligttpd: 2010-03-07 21:00:11: (log.c.166) server started 2010-03-07 21:00:11: (mod_fastcgi.c.1104) the fastcgi-backend /usr/local/bin/cgi-fcgi failed to start: 2010-03-07 21:00:11: (mod_fastcgi.c.1108) child exited with status 1 /usr/local/bin/cgi-fcgi 2010-03-07 21:00:11: (mod_fastcgi.c.1111) If you're trying to run your app as a FastCGI backend, make sure you're using the FastCGI-enabled version. If this is PHP on Gentoo, add 'fastcgi' to the USE flags. 2010-03-07 21:00:11: (mod_fastcgi.c.1399) [ERROR]: spawning fcgi failed. 2010-03-07 21:00:11: (server.c.931) Configuration of plugins failed. Going down. I do have cgi-fcgi in /usr/local/bin: $ which cgi-fcgi /usr/local/bin/cgi-fcgi '/usr/local/bin/cgi-fcgi' is the executable after I download and compile fast-cgi. Here is my lighttpd conf file: $ more lighttpd.conf # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) server.port = 9090 ## bind to localhost (default: all interfaces) server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => 1026, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", #"docroot" => "/" # remote server may use # it's own docroot )) ) ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.s ocket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "ac cess plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 Thank you for your help.

  Read the article

• Async ignored on AJAX requests on Nginx server

  - by eComEvo

  Despite sending an async request to the server over AJAX, the server will not respond until the previous unrelated request has finished. The following code is only broken in this way on Nginx, but runs perfectly on Apache. This call will start a background process and it waits for it to complete so it can display the final result. $.ajax({ type: 'GET', async: true, url: $(this).data('route'), data: $('input[name=data]').val(), dataType: 'json', success: function (data) { /* do stuff */} error: function (data) { /* handle errors */} }); The below is called after the above, which on Apache requires 100ms to execute and repeats itself, showing progress for data being written in the background: checkStatusInterval = setInterval(function () { $.ajax({ type: 'GET', async: false, cache: false, url: '/process-status?process=' + currentElement.attr('id'), dataType: 'json', success: function (data) { /* update progress bar and status message */ } }); }, 1000); Unfortunately, when this script is run from nginx, the above progress request never even finishes a single request until the first AJAX request that sent the data is done. If I change the async to TRUE in the above, it executes one every interval, but none of them complete until that very first AJAX request finishes. Here is the main nginx conf file: #user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; server_names_hash_bucket_size 64; # configure temporary paths # nginx is started with param -p, setting nginx path to serverpack installdir fastcgi_temp_path temp/fastcgi; uwsgi_temp_path temp/uwsgi; scgi_temp_path temp/scgi; client_body_temp_path temp/client-body 1 2; proxy_temp_path temp/proxy; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; # Sendfile copies data between one FD and other from within the kernel. # More efficient than read() + write(), since the requires transferring data to and from the user space. sendfile on; # Tcp_nopush causes nginx to attempt to send its HTTP response head in one packet, # instead of using partial frames. This is useful for prepending headers before calling sendfile, # or for throughput optimization. tcp_nopush on; # don't buffer data-sends (disable Nagle algorithm). Good for sending frequent small bursts of data in real time. tcp_nodelay on; types_hash_max_size 2048; # Timeout for keep-alive connections. Server will close connections after this time. keepalive_timeout 90; # Number of requests a client can make over the keep-alive connection. This is set high for testing. keepalive_requests 100000; # allow the server to close the connection after a client stops responding. Frees up socket-associated memory. reset_timedout_connection on; # send the client a "request timed out" if the body is not loaded by this time. Default 60. client_header_timeout 20; client_body_timeout 60; # If the client stops reading data, free up the stale client connection after this much time. Default 60. send_timeout 60; # Size Limits client_body_buffer_size 64k; client_header_buffer_size 4k; client_max_body_size 8M; # FastCGI fastcgi_connect_timeout 60; fastcgi_send_timeout 120; fastcgi_read_timeout 300; # default: 60 secs; when step debugging with XDEBUG, you need to increase this value fastcgi_buffer_size 64k; fastcgi_buffers 4 64k; fastcgi_busy_buffers_size 128k; fastcgi_temp_file_write_size 128k; # Caches information about open FDs, freqently accessed files. open_file_cache max=200000 inactive=20s; open_file_cache_valid 30s; open_file_cache_min_uses 2; open_file_cache_errors on; # Turn on gzip output compression to save bandwidth. # http://wiki.nginx.org/HttpGzipModule gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; gzip_http_version 1.1; gzip_vary on; gzip_proxied any; #gzip_proxied expired no-cache no-store private auth; gzip_comp_level 6; gzip_buffers 16 8k; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript application/javascript; # show all files and folders autoindex on; server { # access from localhost only listen 127.0.0.1:80; server_name localhost; root www; # the following default "catch-all" configuration, allows access to the server from outside. # please ensure your firewall allows access to tcp/port 80. check your "skype" config. # listen 80; # server_name _; log_not_found off; charset utf-8; access_log logs/access.log main; # handle files in the root path /www location / { index index.php index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root www; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9100 # location ~ \.php$ { try_files $uri =404; fastcgi_pass 127.0.0.1:9100; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } # add expire headers location ~* ^.+.(gif|ico|jpg|jpeg|png|flv|swf|pdf|mp3|mp4|xml|txt|js|css)$ { expires 30d; } # deny access to .htaccess files (if Apache's document root concurs with nginx's one) # deny access to git & svn repositories location ~ /(\.ht|\.git|\.svn) { deny all; } } # include config files of "enabled" domains include domains-enabled/*.conf; } Here is the enabled domain conf file: access_log off; access_log C:/server/www/test.dev/logs/access.log; error_log C:/server/www/test.dev/logs/error.log; # HTTP Server server { listen 127.0.0.1:80; server_name test.dev; root C:/server/www/test.dev/public; index index.php; rewrite_log on; default_type application/octet-stream; #include /etc/nginx/mime.types; # Include common configurations. include domains-common/location.conf; } # HTTPS server server { listen 443 ssl; server_name test.dev; root C:/server/www/test.dev/public; index index.php; rewrite_log on; default_type application/octet-stream; #include /etc/nginx/mime.types; # Include common configurations. include domains-common/location.conf; include domains-common/ssl.conf; } Contents of ssl.conf: # OpenSSL for HTTPS connections. ssl on; ssl_certificate C:/server/bin/openssl/certs/cert.pem; ssl_certificate_key C:/server/bin/openssl/certs/cert.key; ssl_session_timeout 5m; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; # Pass the PHP scripts to FastCGI server listening on 127.0.0.1:9100 location ~ \.php$ { try_files $uri =404; fastcgi_param HTTPS on; fastcgi_pass 127.0.0.1:9100; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } Contents of location.conf: # Remove trailing slash to please Laravel routing system. if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } location / { try_files $uri $uri/ /index.php?$query_string; } # We don't need .ht files with nginx. location ~ /(\.ht|\.git|\.svn) { deny all; } # Added cache headers for images. location ~* \.(png|jpg|jpeg|gif)$ { expires 30d; log_not_found off; } # Only 3 hours on CSS/JS to allow me to roll out fixes during early weeks. location ~* \.(js|css)$ { expires 3h; log_not_found off; } # Add expire headers. location ~* ^.+.(gif|ico|jpg|jpeg|png|flv|swf|pdf|mp3|mp4|xml|txt)$ { expires 30d; } # Pass the PHP scripts to FastCGI server listening on 127.0.0.1:9100 location ~ \.php$ { try_files $uri /index.php =404; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; fastcgi_pass 127.0.0.1:9100; } Any ideas where this is going wrong?

  Read the article

• Configuring OpenLDAP and SSL

  - by Stormshadow

  I am having trouble trying to connect to a secure OpenLDAP server which I have set up. On running my LDAP client code java -Djavax.net.debug=ssl LDAPConnector I get the following exception trace (java version 1.6.0_17) trigger seeding of SecureRandom done seeding SecureRandom %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1256110124 bytes = { 224, 19, 193, 148, 45, 205, 108, 37, 101, 247, 112, 24, 157, 39, 111, 177, 43, 53, 206, 224, 68, 165, 55, 185, 54, 203, 43, 91 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_W ITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SH A, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA] Compression Methods: { 0 } *** Thread-0, WRITE: TLSv1 Handshake, length = 73 Thread-0, WRITE: SSLv2 client hello message, length = 98 Thread-0, received EOFException: error Thread-0, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Thread-0, SEND TLSv1 ALERT: fatal, description = handshake_failure Thread-0, WRITE: TLSv1 Alert, length = 2 Thread-0, called closeSocket() main, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake javax.naming.CommunicationException: simple bind failed: ldap.natraj.com:636 [Root exception is javax.net.ssl.SSLHandshakeException: Remote host closed connection during hands hake] at com.sun.jndi.ldap.LdapClient.authenticate(Unknown Source) at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source) at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source) at javax.naming.spi.NamingManager.getInitialContext(Unknown Source) at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source) at javax.naming.InitialContext.init(Unknown Source) at javax.naming.InitialContext.<init>(Unknown Source) at javax.naming.directory.InitialDirContext.<init>(Unknown Source) at LDAPConnector.CallSecureLDAPServer(LDAPConnector.java:43) at LDAPConnector.main(LDAPConnector.java:237) Caused by: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at com.sun.jndi.ldap.Connection.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: java.io.EOFException: SSL peer shut down incorrectly at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source) ... 9 more I am able to connect to the same secure LDAP server however if I use another version of java (1.6.0_14) I have created and installed the server certificates in the cacerts of both the JRE's as mentioned in this guide -- OpenLDAP with SSL When I run ldapsearch -x on the server I get # extended LDIF # # LDAPv3 # base <dc=localdomain> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # localdomain dn: dc=localdomain objectClass: top objectClass: dcObject objectClass: organization o: localdomain dc: localdomain # admin, localdomain dn: cn=admin,dc=localdomain objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator # search result search: 2 result: 0 Success # numResponses: 3 # numEntries: 2 On running openssl s_client -connect ldap.natraj.com:636 -showcerts , I obtain the self signed certificate. My slapd.conf file is as follows ####################################################################### # Global Directives: # Features to permit #allow bind_v2 # Schema and objectClass definitions include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema # Where the pid file is put. The init.d script # will not stop the server if you change this. pidfile /var/run/slapd/slapd.pid # List of arguments that were passed to the server argsfile /var/run/slapd/slapd.args # Read slapd.conf(5) for possible values loglevel none # Where the dynamically loaded modules are stored modulepath /usr/lib/ldap moduleload back_hdb # The maximum number of entries that is returned for a search operation sizelimit 500 # The tool-threads parameter sets the actual amount of cpu's that is used # for indexing. tool-threads 1 ####################################################################### # Specific Backend Directives for hdb: # Backend specific directives apply to this backend until another # 'backend' directive occurs backend hdb ####################################################################### # Specific Backend Directives for 'other': # Backend specific directives apply to this backend until another # 'backend' directive occurs #backend <other> ####################################################################### # Specific Directives for database #1, of type hdb: # Database specific directives apply to this databasse until another # 'database' directive occurs database hdb # The base of your directory in database #1 suffix "dc=localdomain" # rootdn directive for specifying a superuser on the database. This is needed # for syncrepl. rootdn "cn=admin,dc=localdomain" # Where the database file are physically stored for database #1 directory "/var/lib/ldap" # The dbconfig settings are used to generate a DB_CONFIG file the first # time slapd starts. They do NOT override existing an existing DB_CONFIG # file. You should therefore change these settings in DB_CONFIG directly # or remove DB_CONFIG and restart slapd for changes to take effect. # For the Debian package we use 2MB as default but be sure to update this # value if you have plenty of RAM dbconfig set_cachesize 0 2097152 0 # Sven Hartge reported that he had to set this value incredibly high # to get slapd running at all. See http://bugs.debian.org/303057 for more # information. # Number of objects that can be locked at the same time. dbconfig set_lk_max_objects 1500 # Number of locks (both requested and granted) dbconfig set_lk_max_locks 1500 # Number of lockers dbconfig set_lk_max_lockers 1500 # Indexing options for database #1 index objectClass eq # Save the time that the entry gets modified, for database #1 lastmod on # Checkpoint the BerkeleyDB database periodically in case of system # failure and to speed slapd shutdown. checkpoint 512 30 # Where to store the replica logs for database #1 # replogfile /var/lib/ldap/replog # The userPassword by default can be changed # by the entry owning it if they are authenticated. # Others should not be able to see it, except the # admin entry below # These access lines apply to database #1 only access to attrs=userPassword,shadowLastChange by dn="cn=admin,dc=localdomain" write by anonymous auth by self write by * none # Ensure read access to the base for things like # supportedSASLMechanisms. Without this you may # have problems with SASL not knowing what # mechanisms are available and the like. # Note that this is covered by the 'access to *' # ACL below too but if you change that as people # are wont to do you'll still need this if you # want SASL (and possible other things) to work # happily. access to dn.base="" by * read # The admin dn has full write access, everyone else # can read everything. access to * by dn="cn=admin,dc=localdomain" write by * read # For Netscape Roaming support, each user gets a roaming # profile for which they have write access to #access to dn=".*,ou=Roaming,o=morsnet" # by dn="cn=admin,dc=localdomain" write # by dnattr=owner write ####################################################################### # Specific Directives for database #2, of type 'other' (can be hdb too): # Database specific directives apply to this databasse until another # 'database' directive occurs #database <other> # The base of your directory for database #2 #suffix "dc=debian,dc=org" ####################################################################### # SSL: # Uncomment the following lines to enable SSL and use the default # snakeoil certificates. #TLSCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem #TLSCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key TLSCipherSuite TLS_RSA_AES_256_CBC_SHA TLSCACertificateFile /etc/ldap/ssl/server.pem TLSCertificateFile /etc/ldap/ssl/server.pem TLSCertificateKeyFile /etc/ldap/ssl/server.pem My ldap.conf file is # # LDAP Defaults # # See ldap.conf(5) for details # This file should be world readable but not world writable. HOST ldap.natraj.com PORT 636 BASE dc=localdomain URI ldaps://ldap.natraj.com TLS_CACERT /etc/ldap/ssl/server.pem TLS_REQCERT allow #SIZELIMIT 12 #TIMELIMIT 15 #DEREF never Why is it that I can connect to the same server using one version of JRE while I cannot with another ?

  Read the article

• Trouble connecting to vsftpd on ubuntu server

  - by littleK

  I have installed Ubuntu Server 10.10 and I am using it to host a domain that I have. I am trying to set up FTP for the server, but I am running into some problems. I have successfully installed vsFTPd and I have opened up ports 20, 21 on my firewall. In my vsFTPd configuration, I have enabled SSL. Every time I try to connect to my server via FTP, I receive a "Connection Refused" error. I have had a little more success with SSL disabled, however the connection process will time out after the LIST command (but it does accept my authentication). Here is my vsFTPd configuration, the SSL stuff is at the bottom: # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Run standalone with IPv6? # Like the listen parameter, except vsftpd will listen on an IPv6 socket # instead of an IPv4 one. This parameter and the listen parameter are mutually # exclusive. #listen_ipv6=YES # # Allow anonymous FTP? (Disabled by default) anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # If enabled, vsftpd will display directory listings with the time # in your local time zone. The default is to display GMT. The # times returned by the MDTM FTP command are also affected by this # option. use_localtime=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. #xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. #chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # Debian customization # # Some of vsftpd's settings don't fit the Debian filesystem layout by # default. These settings are more Debian-friendly. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd/empty # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/private/vsftpd.pem # SSL ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=YES force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES Thanks!

  Read the article

• How to use sudo with WinSCP and ProFTPd?

  - by Gaia

  I need to run the SFTP fileserver binary as root, but direct root login is not allowed. In WinSCP, if I use "default" on SFTP server protocol option everything works as expected. Following the instructions to sudo in WinSCP, I tried using "sudo /usr/sbin/proftpd" (works on the command line without any prompts) but it brings up "Cannot initialize SFTP protocol. Is the host running a SFTP server?" How to use sudo with WinSCP and ProFTPd? WinSCP 4.3.7 GUI Protocol: SFTP-3 CentOS 6.2 Webmin/Virtualmin (Current Version) PS: only cert based login is allowed . 2012-06-17 11:05:56.998 -------------------------------------------------------------------------- . 2012-06-17 11:05:56.998 WinSCP Version 4.3.7 (Build 1679) (OS 6.1.7601 Service Pack 1) . 2012-06-17 11:05:56.998 Configuration: HKEY_CURRENT_USER\Software\Martin Prikryl\WinSCP 2\ . 2012-06-17 11:05:56.999 Login time: Sunday, June 17, 2012 11:05:56 AM . 2012-06-17 11:05:56.999 -------------------------------------------------------------------------- . 2012-06-17 11:05:56.999 Session name: KVM1 (Modified stored session) . 2012-06-17 11:05:57.047 Host name: mykvm.com (Port: 22) . 2012-06-17 11:05:57.048 User name: adminuser (Password: No, Key file: Yes) . 2012-06-17 11:05:57.048 Tunnel: No . 2012-06-17 11:05:57.048 Transfer Protocol: SFTP (SCP) . 2012-06-17 11:05:57.048 Ping type: -, Ping interval: 30 sec; Timeout: 15 sec . 2012-06-17 11:05:57.048 Proxy: none . 2012-06-17 11:05:57.048 SSH protocol version: 2; Compression: Yes . 2012-06-17 11:05:57.048 Bypass authentication: No . 2012-06-17 11:05:57.048 Try agent: Yes; Agent forwarding: No; TIS/CryptoCard: No; KI: Yes; GSSAPI: No . 2012-06-17 11:05:57.048 Ciphers: aes,blowfish,3des,WARN,arcfour,des; Ssh2DES: No . 2012-06-17 11:05:57.048 SSH Bugs: -,-,-,-,-,-,-,-,- . 2012-06-17 11:05:57.048 SFTP Bugs: -,- . 2012-06-17 11:05:57.048 Return code variable: Autodetect; Lookup user groups: Yes . 2012-06-17 11:05:57.048 Shell: default . 2012-06-17 11:05:57.048 EOL: 0, UTF: 2 . 2012-06-17 11:05:57.048 Clear aliases: Yes, Unset nat.vars: Yes, Resolve symlinks: Yes . 2012-06-17 11:05:57.048 LS: ls -la, Ign LS warn: Yes, Scp1 Comp: No . 2012-06-17 11:05:57.048 Local directory: default, Remote directory: home, Update: No, Cache: Yes . 2012-06-17 11:05:57.048 Cache directory changes: Yes, Permanent: Yes . 2012-06-17 11:05:57.048 DST mode: 1 . 2012-06-17 11:05:57.048 -------------------------------------------------------------------------- . 2012-06-17 11:05:57.113 Looking up host "mykvm.com" . 2012-06-17 11:05:57.132 Connecting to xxx.xxx.128.59 port 22 . 2012-06-17 11:05:57.499 Server version: SSH-2.0-OpenSSH_5.3 . 2012-06-17 11:05:57.499 Using SSH protocol version 2 . 2012-06-17 11:05:57.499 We claim version: SSH-2.0-WinSCP_release_4.3.7 . 2012-06-17 11:05:57.679 Server supports delayed compression; will try this later . 2012-06-17 11:05:57.679 Doing Diffie-Hellman group exchange . 2012-06-17 11:05:58.077 Doing Diffie-Hellman key exchange with hash SHA-1 . 2012-06-17 11:05:58.498 Host key fingerprint is: . 2012-06-17 11:05:58.498 ssh-rsa 2048 bd:e4:34:b1:d4:69:d6:4e:e4:26:04:8b:b7:b3:de:c3 . 2012-06-17 11:05:58.498 Initialised AES-256 SDCTR client->server encryption . 2012-06-17 11:05:58.498 Initialised HMAC-SHA1 client->server MAC algorithm . 2012-06-17 11:05:58.498 Initialised AES-256 SDCTR server->client encryption . 2012-06-17 11:05:58.498 Initialised HMAC-SHA1 server->client MAC algorithm . 2012-06-17 11:05:58.922 Reading private key file "D:\id_rsa.ppk" ! 2012-06-17 11:05:58.924 Using username "adminuser". . 2012-06-17 11:05:59.550 Offered public key . 2012-06-17 11:05:59.743 Offer of public key accepted ! 2012-06-17 11:05:59.743 Authenticating with public key "masterkey for admin" . 2012-06-17 11:05:59.764 Prompt (3, SSH key passphrase, , Passphrase for key "masterkey for admin": ) . 2012-06-17 11:06:02.938 Sent public key signature . 2012-06-17 11:06:03.352 Access granted . 2012-06-17 11:06:03.352 Initiating key re-exchange (enabling delayed compression) . 2012-06-17 11:06:03.765 Doing Diffie-Hellman group exchange . 2012-06-17 11:06:03.955 Doing Diffie-Hellman key exchange with hash SHA-1 . 2012-06-17 11:06:04.410 Initialised AES-256 SDCTR client->server encryption . 2012-06-17 11:06:04.410 Initialised HMAC-SHA1 client->server MAC algorithm . 2012-06-17 11:06:04.410 Initialised zlib (RFC1950) compression . 2012-06-17 11:06:04.410 Initialised AES-256 SDCTR server->client encryption . 2012-06-17 11:06:04.410 Initialised HMAC-SHA1 server->client MAC algorithm . 2012-06-17 11:06:04.410 Initialised zlib (RFC1950) decompression . 2012-06-17 11:06:04.839 Opened channel for session . 2012-06-17 11:06:05.247 Started a shell/command . 2012-06-17 11:06:05.253 -------------------------------------------------------------------------- . 2012-06-17 11:06:05.253 Using SFTP protocol. . 2012-06-17 11:06:05.253 Doing startup conversation with host. > 2012-06-17 11:06:05.259 Type: SSH_FXP_INIT, Size: 5, Number: -1 . 2012-06-17 11:06:05.354 Server sent command exit status 0 . 2012-06-17 11:06:05.354 Disconnected: All channels closed * 2012-06-17 11:06:05.380 (ESshFatal) Connection has been unexpectedly closed. Server sent command exit status 0. * 2012-06-17 11:06:05.380 Cannot initialize SFTP protocol. Is the host running a SFTP server?

  Read the article

• ServerRoot in my lighttpd.conf

  - by michael

  Hi, I have use the following example lighttpd.conf to launch my lighttpd. Can you please tell me where is my 'ServerRoot'? # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) server.port = 9090 ## bind to localhost (default: all interfaces) server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => 1026, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", #"docroot" => "/" # remote server may use # it's own docroot )) ) ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.socket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 Thank you.

  Read the article

• Can't Get Virtual Users Setup in VSFTPD -Tried Everything

  - by N.T.

  Have Ubuntu 11.10 with vsftpd installed and working. Can not get virtual users setup at all? Vsftpd will allow main Ubuntu owner account to login, but nothing else? I've followed several tutorials on adding virtual users, but nothing works? I just need to add 2 virtual users and have them be able to upload files to vsftpd Ubuntu computer from other computers on my Lan network. Everywhere I've looked, people just point toward tutorials on adding virtual users, but that just is NOT working. I've been struggling with this for over a week now! PLEASE Help. Thanks. I'll even give a donation if someone can figure this out. here is the vsftpd.conf file I am using. I copied the original, and make a new one, every time I try a tutorial. So far, none have worked. Here is the vsftpd.conf file I'm using. (I hope this helps?) # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Run standalone with IPv6? # Like the listen parameter, except vsftpd will listen on an IPv6 socket # instead of an IPv4 one. This parameter and the listen parameter are mutually # exclusive. #listen_ipv6=YES # # Allow anonymous FTP? (Disabled by default) anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # If enabled, vsftpd will display directory listings with the time # in your local time zone. The default is to display GMT. The # times returned by the MDTM FTP command are also affected by this # option. use_localtime=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Welcome to Sage FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # Debian customization # # Some of vsftpd's settings don't fit the Debian filesystem layout by # default. These settings are more Debian-friendly. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd/empty # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd local_root=/media/FilesDrive # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/private/vsftpd.pem

  Read the article

• How can I resolve this one application coming up with an "You don't have permission to use the application" error?

  - by morgant

  I've got a Mac OS X 10.6 Snow Leopard Server Open Directory Master with a user who's getting Mobility & Application managed preferences from a group (the only group they're a member of). The workstation is also running Mac OS X 10.6 Snow Leopard, when the user logs in and tries to run our primary application which they're explicitly allowed to run (via the group's preferences), it says "You don't have permission to use the application 'Blah'". Now, the application is added to the group's list of always allowed applications, unsigned (so a minor difference in application version or file contents shouldn't disallow it). It even lives in a subdirectory of /Applications which is in the list of folders to allow applications. I've run into this when logging this user into new workstations and the following usually works: Log them out Remove the following files from their mobile home folder on the workstation: /Library/Managed\ Preferences/, ~/.FileSync, ~/Library/Preferences/com.apple.finder.plist, and ~/Library/Preferences/com.apple.MCX.plist. Remove the following files from their network home folder on the server: ~/.FileSync, ~/Library/Preferences/com.apple.finder.plist, and ~/Library/Preferences/com.apple.MCX.plist. Log them back in on the workstation. However, this no longer resolves the issue. Their Home Sync preferences are set (on the group) to sync ~, but not the following files (manually, at login, and at logout... no background sync here): ~/.SymAVQSFile ~/NAVMac800QSFile ~/Library ~/.FileSync ~/.account Their Preferences Sync preferences are set (also on the group) to sync ~/Library & ~/Documents/Microsoft User Data, but not the following files (also manually, at login, and at logout... no background sync): ~/.SymAVQSFile ~/.Trash ~/.Trashes ~/Documents/Microsoft User Data/Entourage Temp ~/Library/Application Support/SyncServices ~/Library/Application Support/MobileSync ~/Library/Caches ~/Library/Calendars/Calendar Cache ~/Library/Logs ~/Library/Mail/AvailableFeeds ~/Library/Mail/Envelope Index ~/Library/Preferences/Macromedia/ ~/Library/Printers ~/Library/PubSub/Database ~/Library/PubSub/Downloads ~/Library/PubSub/Feeds ~/Library/Safari/Icons.db ~/Library/Safari/HistoryIndex.sk ~/Library/iTunes/iPhone Software Updates IMAP-* Exchange-* EWS-* Mac-* ~/Library/Preferences/ByHost ~/Library/Preferences/com.apple.dock.plist ~/Library/Preferences/com.apple.sitebarlists.plist ~/Library/Application Support/4D ~/Library/Preferences/com.apple.MCX.plist ~/.FileSync ~/.account Even with ~/Library/Preferences/com.apple.MCX.plist prevented from syncing during a Preferences Sync, it still seems to show up in the network home on the server frequently. Are there any other files other than ~/Library/Preferences/com.apple.MCX.plist that contain application Managed Preferences that might be causing this one app to be showing up as not allowed? Any ideas on how ~/Library/Preferences/com.apple.MCX.plist keeps getting sync'd back up the network home folder on the server? Update: I thought I had found a workaround this morning, but it also seemed to be extremely temporary. Basically, loking at /Library/Managed\ Preferences/[shortname]/com.apple.applicationaccess.new.plist I discovered that it didn't have an entry for the application in question, but /Library/Managed\ Preferences/[shortname]/complete.plist did. Naturally, I deleted com.apple.applicationaccess.new.plist, logged in again, and it worked... on one workstation. It failed on others, and after logging out & back in a couple more times it started failing on all of them again, even after further deletions of com.apple.applicationaccess.new.plist. Oddly, com.apple.applicationaccess.new.plist & complete.plist do both contain an entry for the application in question now, but it still says it's not allowed. Further Update: Okay, so I now have a reproducible workaround which seems to be required after every reboot of the workstation: Log in as the user (you'll discover you cannot launch the application in question). Fast User Switch to the local admin account on the workstation (we always have one on every machine). From that local admin account, run sudo mcxrefresh -n 'shortname' (logging out and back in as the user in question will not work). Fast User Switch back to the user (you'll still not be allowed to run the application). Log the user out and back in (you'll now be able to run the application in question.) Fast User Switch back to the local admin account, log it out, and log back in as the user in question. If you do all that exactly as described it'll keep working through log out & log back in, but NOT through a reboot. If, after a reboot, you try something like logging in as the local admin account, running sudo mcxrefresh -n 'shortname', logging out, then logging in as the user in question, it will NOT work. Yet Another Update We don't have any computer groups in our Open Directory, so it shouldn't be getting any conflicting settings from there. I ran sudo mcxquery -format xml -user shortname -group groupname before & after performing the aforementioned process to allow the application in question to be run and the results were identical (saved the result to files & diff'd... I'm not just guessing here). One Step Forward, Half a Step Back: When the Mac OS X 10.6.5 Server update was released, we upgraded our Open Directory Master to it as the changes included the following managed preferences fixes which I hoped might address this issue: Addresses an issue that could prevent managed preferences from being applied when a user logs in on a workstation that has been idle. Fixes an issue that could prevent administrators from bypassing client management settings on a workstation. This seemed to improve the situation slightly. The application in question now usually launches without error. If, and when it does launch with the "You don't have permission to use the application" error, logging the user out and back in seems to correct it. That said, we've since had to add a couple of applications to the user's ~/Applications/ directory and those are still prevented from launching. The workstations are running Mac OS X 10.6.4, the OD Master (which the workstations are bound to) is running Mac OS 10.6.5 Server (although there are two OD Replicas still running 10.6.4 Server), and we're using Workgroup Manager 10.6.3 (which is included with the Server Admin Tools 10.6.5 upgrade) to add the applications (unsigned, as always). This time, I've caught the following in /var/log/system.log when attempting to launch one of the allowed applications from ~/Applications: Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker checkApp:csFlags:] [954:username] -- *** Incoming app appears to be masquerading as white listed app and failed signature validation: /Users/username/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro. Note: This may be a valid app of a different version than what was whitelisted (on a different volume?) Dec 22 17:36:24 hostname [0x0-0xa42a42].com.filemaker.filemakerpro[43304]: launch of /Users/username/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro was blocked Dec 22 17:36:24 hostname com.apple.launchd.peruser.1340[6375] ([0x0-0xa42a42].com.filemaker.filemakerpro[43304]): Exited with exit code: 255 Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker(Private) _removeAppFromWhiteList:] [1362:username] -- *** Couldn't find local user record Running sudo mcxquery -format xml -user username -group groupname includes the following entry for FileMaker Pro 5.5 (and appears to include a full integration of the user's application whitelist & group's application whitelist): <dict> <key>bundleID</key> <string>com.filemaker.filemakerpro</string> <key>displayName</key> <string>FileMaker Pro</string> </dict> Note the lack of <key>appID</key><data> ... </data> which seems to specify a signed application. While whitelisted directories also appear to be correctly listed in the results, they too do not actually allow the applications to be run either. What is going on here?! Where else should I be looking?

  Read the article

• How can I resolve this one application coming up with an "You don't have permission to use the application" error?

  - by morgant

  I've got a Mac OS X 10.6 Snow Leopard Server Open Directory Master with a user who's getting Mobility & Application managed preferences from a group (the only group they're a member of). The workstation is also running Mac OS X 10.6 Snow Leopard, when the user logs in and tries to run our primary application which they're explicitly allowed to run (via the group's preferences), it says "You don't have permission to use the application 'Blah'". Now, the application is added to the group's list of always allowed applications, unsigned (so a minor difference in application version or file contents shouldn't disallow it). It even lives in a subdirectory of /Applications which is in the list of folders to allow applications. I've run into this when logging this user into new workstations and the following usually works: Log them out Remove the following files from their mobile home folder on the workstation: /Library/Managed\ Preferences/, ~/.FileSync, ~/Library/Preferences/com.apple.finder.plist, and ~/Library/Preferences/com.apple.MCX.plist. Remove the following files from their network home folder on the server: ~/.FileSync, ~/Library/Preferences/com.apple.finder.plist, and ~/Library/Preferences/com.apple.MCX.plist. Log them back in on the workstation. However, this no longer resolves the issue. Their Home Sync preferences are set (on the group) to sync ~, but not the following files (manually, at login, and at logout... no background sync here): ~/.SymAVQSFile ~/NAVMac800QSFile ~/Library ~/.FileSync ~/.account Their Preferences Sync preferences are set (also on the group) to sync ~/Library & ~/Documents/Microsoft User Data, but not the following files (also manually, at login, and at logout... no background sync): ~/.SymAVQSFile ~/.Trash ~/.Trashes ~/Documents/Microsoft User Data/Entourage Temp ~/Library/Application Support/SyncServices ~/Library/Application Support/MobileSync ~/Library/Caches ~/Library/Calendars/Calendar Cache ~/Library/Logs ~/Library/Mail/AvailableFeeds ~/Library/Mail/Envelope Index ~/Library/Preferences/Macromedia/ ~/Library/Printers ~/Library/PubSub/Database ~/Library/PubSub/Downloads ~/Library/PubSub/Feeds ~/Library/Safari/Icons.db ~/Library/Safari/HistoryIndex.sk ~/Library/iTunes/iPhone Software Updates IMAP-* Exchange-* EWS-* Mac-* ~/Library/Preferences/ByHost ~/Library/Preferences/com.apple.dock.plist ~/Library/Preferences/com.apple.sitebarlists.plist ~/Library/Application Support/4D ~/Library/Preferences/com.apple.MCX.plist ~/.FileSync ~/.account Even with ~/Library/Preferences/com.apple.MCX.plist prevented from syncing during a Preferences Sync, it still seems to show up in the network home on the server frequently. Are there any other files other than ~/Library/Preferences/com.apple.MCX.plist that contain application Managed Preferences that might be causing this one app to be showing up as not allowed? Any ideas on how ~/Library/Preferences/com.apple.MCX.plist keeps getting sync'd back up the network home folder on the server? Update: I thought I had found a workaround this morning, but it also seemed to be extremely temporary. Basically, loking at /Library/Managed\ Preferences/[shortname]/com.apple.applicationaccess.new.plist I discovered that it didn't have an entry for the application in question, but /Library/Managed\ Preferences/[shortname]/complete.plist did. Naturally, I deleted com.apple.applicationaccess.new.plist, logged in again, and it worked... on one workstation. It failed on others, and after logging out & back in a couple more times it started failing on all of them again, even after further deletions of com.apple.applicationaccess.new.plist. Oddly, com.apple.applicationaccess.new.plist & complete.plist do both contain an entry for the application in question now, but it still says it's not allowed. Further Update: Okay, so I now have a reproducible workaround which seems to be required after every reboot of the workstation: Log in as the user (you'll discover you cannot launch the application in question). Fast User Switch to the local admin account on the workstation (we always have one on every machine). From that local admin account, run sudo mcxrefresh -n 'shortname' (logging out and back in as the user in question will not work). Fast User Switch back to the user (you'll still not be allowed to run the application). Log the user out and back in (you'll now be able to run the application in question.) Fast User Switch back to the local admin account, log it out, and log back in as the user in question. If you do all that exactly as described it'll keep working through log out & log back in, but NOT through a reboot. If, after a reboot, you try something like logging in as the local admin account, running sudo mcxrefresh -n 'shortname', logging out, then logging in as the user in question, it will NOT work. Yet Another Update We don't have any computer groups in our Open Directory, so it shouldn't be getting any conflicting settings from there. I ran sudo mcxquery -format xml -user shortname -group groupname before & after performing the aforementioned process to allow the application in question to be run and the results were identical (saved the result to files & diff'd... I'm not just guessing here). One Step Forward, Half a Step Back: When the Mac OS X 10.6.5 Server update was released, we upgraded our Open Directory Master to it as the changes included the following managed preferences fixes which I hoped might address this issue: Addresses an issue that could prevent managed preferences from being applied when a user logs in on a workstation that has been idle. Fixes an issue that could prevent administrators from bypassing client management settings on a workstation. This seemed to improve the situation slightly. The application in question now usually launches without error. If, and when it does launch with the "You don't have permission to use the application" error, logging the user out and back in seems to correct it. That said, we've since had to add a couple of applications to the user's ~/Applications/ directory and those are still prevented from launching. The workstations are running Mac OS X 10.6.4, the OD Master (which the workstations are bound to) is running Mac OS 10.6.5 Server (although there are two OD Replicas still running 10.6.4 Server), and we're using Workgroup Manager 10.6.3 (which is included with the Server Admin Tools 10.6.5 upgrade) to add the applications (unsigned, as always). This time, I've caught the following in /var/log/system.log when attempting to launch one of the allowed applications from ~/Applications: Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker checkApp:csFlags:] [954:username] -- *** Incoming app appears to be masquerading as white listed app and failed signature validation: /Users/username/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro. Note: This may be a valid app of a different version than what was whitelisted (on a different volume?) Dec 22 17:36:24 hostname [0x0-0xa42a42].com.filemaker.filemakerpro[43304]: launch of /Users/username/Applications/FileMaker Pro 5.5/FileMaker Pro.app/Contents/MacOS/FileMaker Pro was blocked Dec 22 17:36:24 hostname com.apple.launchd.peruser.1340[6375] ([0x0-0xa42a42].com.filemaker.filemakerpro[43304]): Exited with exit code: 255 Dec 22 17:36:24 hostname parentalcontrolsd[43221]: -[ActivityTracker(Private) _removeAppFromWhiteList:] [1362:username] -- *** Couldn't find local user record Running sudo mcxquery -format xml -user username -group groupname includes the following entry for FileMaker Pro 5.5 (and appears to include a full integration of the user's application whitelist & group's application whitelist): <dict> <key>bundleID</key> <string>com.filemaker.filemakerpro</string> <key>displayName</key> <string>FileMaker Pro</string> </dict> Note the lack of <key>appID</key><data> ... </data> which seems to specify a signed application. While whitelisted directories also appear to be correctly listed in the results, they too do not actually allow the applications to be run either. What is going on here?! Where else should I be looking?

  Read the article

• Windows Server 2008 R2 network adapter stops working, requires hard reboot

  - by Geoff Dalgas

  TL;DR version: Turns out this was a Windows Server 2008 R2 kernel networking bug. After siccing Microsoft support on it, we (eventually) got an unpublished kernel hotfix from Microsoft to address it. If you, too, are experiencing mysterious low-level network driver failures requiring a reboot/bluescreen cycle, you might want that hotfix (or maybe Service Pack 1 whenever it is released, too.) We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps. Switch Virtualization providers On the off chance this was related to Hyper-V in some way (we do host Linux VMs on it), we switched to VMWare Server. No change. Switch host model We've reached the end of our troubleshooting rope and are now formally involving Microsoft support. They recommended changing the host model: http://en.wikipedia.org/wiki/Host_model http://technet.microsoft.com/en-us/magazine/2007.09.cableguy.aspx We did that, and.. we'll see.

  Read the article

• rsync over ssh is not working anymore, while ssh itself is working fine (Write failed: broken pipe)

  - by brazorf

  This issue started happening after i changed router. This is the scenario: Windows7 Host Ubuntu 10.04 Guest (VirtualBox) Ubuntu 10.04 remote server What i used to do is run a very basic rsync command: rsync -avz --delete /local/path/ username@host:/path/to/remote/directory This worked perfect until i did change adsl provider, and i changed router aswell: now, this happens: rsync on Ubuntu Guest is not working anymore (to any random server), if using this new router rsync on Ubuntu Guest is WORKING, if i switch back to old router i tried a new virtual box ubuntu install, and the command is WORKING with both the routers So, the not-working-combo is oldUbuntu + newRouter. To get things worst, i can state that (on the not-working ubuntu) i ping the remote host plain ssh connection to the remote host is working fine (i can auth, connect, and do stuff on the remote host) scp is NOT working (this is just a further thing i tried) This is the console output of the execution, with ssh verbose set to vvvv: root@client:~# rsync -ae 'ssh -vvvv' /root/test-rsync/ {username}@{hostname}:/home/{username}/test/ OpenSSH_5.3p1 Debian-3ubuntu7, OpenSSL 0.9.8k 25 Mar 2009 debug1: Reading configuration data /root/.ssh/config debug1: Applying options for {hostname} debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to {hostname} [{ip.add.re.ss}] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug3: Not a RSA1 key file /root/.ssh/{private_key}. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /root/.ssh/{private_key} type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debian-3ubuntu7 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu7 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu7 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug3: Wrote 792 bytes for a total of 831 debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: [email protected],zlib,none debug2: kex_parse_kexinit: [email protected],zlib,none debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 [email protected] debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 [email protected] debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug3: Wrote 24 bytes for a total of 855 debug2: dh_gen_key: priv key bits set: 125/256 debug2: bits set: 525/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: Wrote 144 bytes for a total of 999 debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts debug3: check_host_in_hostfile: match line 4 debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts debug3: check_host_in_hostfile: match line 5 debug1: Host '{hostname}' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:4 debug2: bits set: 512/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug3: Wrote 16 bytes for a total of 1015 debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug3: Wrote 48 bytes for a total of 1063 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/{private_key} (0x7f3ad0e7f9b0) debug3: Wrote 80 bytes for a total of 1143 debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering public key: /root/.ssh/{private_key} debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 368 bytes for a total of 1511 debug1: Server accepts key: pkalg ssh-rsa blen 277 debug2: input_userauth_pk_ok: fp 1b:65:36:92:59:b3:12:3e:8c:c6:03:28:d4:81:09:dc debug3: sign_and_send_pubkey debug1: read PEM private key done: type RSA debug3: Wrote 656 bytes for a total of 2167 debug1: Enabling compression at level 6. debug1: Authentication succeeded (publickey). debug2: fd 4 setting O_NONBLOCK debug3: fd 5 is O_NONBLOCK debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug3: Wrote 112 bytes for a total of 2279 debug2: callback start debug2: client_session2_setup: id 0 debug1: Sending environment. debug3: Ignored env TERM debug3: Ignored env SHELL debug3: Ignored env SSH_CLIENT debug3: Ignored env SSH_TTY debug1: Sending env LC_ALL = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env MAIL debug3: Ignored env PATH debug3: Ignored env PWD debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env SHLVL debug3: Ignored env HOME debug3: Ignored env LANGUAGE debug3: Ignored env LOGNAME debug3: Ignored env SSH_CONNECTION debug3: Ignored env LESSOPEN debug3: Ignored env LESSCLOSE debug3: Ignored env _ debug1: Sending command: rsync --server -logDtpre.iLsf . /home/{username}/test/ debug2: channel 0: request exec confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug3: Wrote 208 bytes for a total of 2487 At this point everything freeze for lots of minutes, ending in Write failed: Broken pipe rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: unexplained error (code 255) at io.c(601) [sender=3.0.7] Any suggestion? Thank You F. Edit 2012/09/13: i am changing title and issue definition, since i made some TINY step ahead and i think i can give more detailed clues.

  Read the article

• Issues with Apache redirect to www-prefixed URL

  - by lamp_scaler

  I have a website with domain mysite.com. I would like to have it so that if a user types in "mysite.com" it will redirect to "www.mysite.com". Additionally, "mysite.com/subdir" will also redirect to "www.mysite.com/subdir". I've looked and made changes with vhosts and also rewrites, but it's not working for the "mysite.com/subdir"-"www.mysite.com/subdir" case. Every time I type in "mysite.com/subdir", it will redirect to "www.mysite.com". Only "www.mysite.com/subdir" works. Not sure how to troubleshoot this. I turned on rewrite logs and didn't see anything obvious, yet. This is my config files so far. Please let me know what I'm missing. Thanks! FYI: I'm using CentOS 5.4, nginx 1.2.0 on top of Apache 2.2.3. The site itself is built with CodeIgniter framework. http.conf: ServerTokens Prod ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 120 KeepAlive Off MaxKeepAliveRequests 100 KeepAliveTimeout 15 <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 10 ServerLimit 256 MaxClients 60 MaxRequestsPerChild 10000 #StartServers 8 #MinSpareServers 5 #MaxSpareServers 20 #ServerLimit 256 #MaxClients 256 #MaxRequestsPerChild 4000 </IfModule> <IfModule worker.c> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Listen 69 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule version_module modules/mod_version.so #rpaf settings LoadModule rpaf_module modules/mod_rpaf-2.0.so RPAFenable On RPAFproxy_ips 127.0.0.1 RPAFsethostname On # The header where the real client IP address is stored. RPAFheader X-Forwarded-For Include conf.d/*.conf User apache Group apache ServerAdmin root@localhost ServerName www.mysite.com:80 UseCanonicalName Off DocumentRoot "/var/www/html" <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> <IfModule mod_userdir.c> UserDir disable </IfModule> DirectoryIndex index.html index.html.var AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> <DirectoryMatch "^/.*/\.svn/"> Order deny,allow Deny from all </DirectoryMatch> TypesConfig /etc/mime.types DefaultType text/plain <IfModule mod_mime_magic.c> MIMEMagicFile conf/magic </IfModule> HostnameLookups Off ErrorLog logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log combined ServerSignature Off Alias /icons/ "/var/www/icons/" <Directory "/var/www/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> <IfModule mod_dav_fs.c> DAVLockDB /var/lib/dav/lockdb </IfModule> ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" <Directory "/var/www/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ DefaultIcon /icons/unknown.gif #AddDescription "GZIP compressed document" .gz #AddDescription "tar archive" .tar #AddDescription "GZIP compressed tar archive" .tgz ReadmeName README.html HeaderName HEADER.html IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw LanguagePriority en zh-CN zh-TW ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddType text/x-component .htc AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddHandler type-map var AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/error/" <IfModule mod_negotiation.c> <IfModule mod_include.c> <Directory "/var/www/error"> AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en es de fr ForceLanguagePriority Prefer Fallback </Directory> </IfModule> </IfModule> BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully vhost.conf: NameVirtualHost *:69 <VirtualHost *:69> ServerName mysite.com ServerAlias vip.mysite.com Redirect / http://www.mysite.com/ </VirtualHost> <VirtualHost *:69> DocumentRoot /home/mysite/mysite/www ServerName www.mysite.com </VirtualHost> <VirtualHost *:69> DocumentRoot /home/mysite/mysite/www/assets ServerName static.mysite.com </VirtualHost> <VirtualHost *:69> DocumentRoot /home/mysite/admin/www ServerName admin.mysite.com </VirtualHost> <VirtualHost *:69> DocumentRoot /home/other/trunk/www ServerName othersite.com ServerAlias www.othersite.com </VirtualHost> <VirtualHost *:69> DocumentRoot /var/www/html ServerName test.mysite.com ServerAlias test2.mysite.com </VirtualHost> /home/mysite/mysite/www/.htaccess: RewriteEngine on # In my case all CI files are outside this web root, so we can # allow any files or directories that exist to be displayed directly RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # hide index.php RewriteRule .* index.php/$0 [L] # BEGIN Compress text files <ifModule mod_deflate.c> <filesMatch "\.(css|js|x?html?|php)$"> SetOutputFilter DEFLATE </filesMatch> </ifModule> # END Compress text files # BEGIN Expire headers <ifModule mod_expires.c> ExpiresActive On ExpiresDefault "access plus 1 seconds" ExpiresByType image/x-icon "access plus 2592000 seconds" ExpiresByType image/jpeg "access plus 2592000 seconds" ExpiresByType image/png "access plus 2592000 seconds" ExpiresByType image/gif "access plus 2592000 seconds" ExpiresByType application/x-shockwave-flash "access plus 2592000 seconds" ExpiresByType text/css "access plus 604800 seconds" ExpiresByType text/javascript "access plus 604800 seconds" ExpiresByType application/javascript "access plus 604800 seconds" ExpiresByType application/x-javascript "access plus 604800 seconds" ExpiresByType application/xhtml+xml "access plus 600 seconds" </ifModule> # END Expire headers # BEGIN Cache-Control Headers <ifModule mod_headers.c> <filesMatch "\.(ico|jpe?g|png|gif|swf)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\.(css)$"> Header set Cache-Control "max-age=604800, public" </filesMatch> <filesMatch "\.(js)$"> Header set Cache-Control "max-age=604800, private" </filesMatch> </ifModule> # END Cache-Control Headers # BEGIN Turn ETags Off <ifModule mod_headers.c> Header unset ETag </ifModule> FileETag None # END Turn ETags Off /etc/nginx/conf.d/default.conf: server { listen 80; server_name static.mysite.com; location / { root /home/mysite/mysite/www/assets; index index.html index.htm; expires max; } } server { listen 80; server_name *.mysite.com www.mysite.com vip.mysite.com; #Set this larger if uploading big files client_max_body_size 5m; location / { proxy_pass http://127.0.0.1:69; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; #client_max_body_size 10m; client_body_buffer_size 128k; proxy_buffer_size 4k; proxy_buffers 4 32k; } }

  Read the article

• "Can't Connect to Server" from 2nd virtual host on VPS

  - by chaoskreator

  I'm using Debian 7 Wheezy and Apache 2.2.22, and I'm setting up Virtual Hosts for a number of websites on my VPS. I've successfully configured the VirtualHost directives for one of the sites, but the second one continually gives "Problem Loading Page" in Firefox. I've run configtest and it has verified all my syntax is correct, and I've checked all the permissions. Everything on the 2nd domain is pretty much copy/pasted from the first, so I'm not sure what the issue is, as there are no entries into /var/log/apache2/error.log other than where I have reloaded the configurations: /# cat /var/log/apache2/error.log [Thu May 29 01:19:00 2014] [notice] Graceful restart requested, doing restart [Thu May 29 01:19:00 2014] [info] Init: Seeding PRNG with 656 bytes of entropy [Thu May 29 01:19:00 2014] [info] Init: Generating temporary RSA private keys (512/1024 bits) [Thu May 29 01:19:00 2014] [info] Init: Generating temporary DH parameters (512/1024 bits) [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(253): shmcb_init allocated 512000 bytes of shared memory [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(272): for 511920 bytes (512000 including header), recommending 32 subcaches, 133 indexes each [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(306): shmcb_init_memory choices follow [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(308): subcache_num = 32 [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(310): subcache_size = 15992 [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(312): subcache_data_offset = 3208 [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(314): subcache_data_size = 12784 [Thu May 29 01:19:00 2014] [debug] ssl_scache_shmcb.c(316): index_num = 133 [Thu May 29 01:19:00 2014] [info] Shared memory session cache initialised [Thu May 29 01:19:00 2014] [info] Init: Initializing (virtual) servers for SSL [Thu May 29 01:19:00 2014] [info] mod_ssl/2.2.22 compiled against Server: Apache/2.2.22, Library: OpenSSL/1.0.1e [Thu May 29 01:19:00 2014] [notice] Apache/2.2.22 (Debian) PHP/5.4.4-14+deb7u9 mod_ssl/2.2.22 OpenSSL/1.0.1e mod_perl/2.0.7 Perl/v5.14.2 configured -- resuming normal operations [Thu May 29 01:19:00 2014] [info] Server built: Mar 4 2013 22:05:16 [Thu May 29 01:19:00 2014] [debug] prefork.c(1023): AcceptMutex: sysvsem (default: sysvsem) I've ensured to enable each vhost with a2ensite {sitename.conf} with no errors there, either. Below are the contents of the configuration files... /etc/apache2/apache2.conf # Global configuration # LockFile ${APACHE_LOCK_DIR}/accept.lock PidFile ${APACHE_PID_FILE} Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadLimit: ThreadsPerChild can be changed to this maximum value during a # graceful restart. ThreadLimit can only be changed by stopping # and starting Apache. # ThreadsPerChild: constant number of worker threads in each server process # MaxClients: maximum number of simultaneous client connections # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxClients: maximum number of simultaneous client connections # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> DefaultType None HostnameLookups Off ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel debug # Include module configuration: Include mods-enabled/*.load Include mods-enabled/*.conf # Include list of ports to listen on and which to use for name based vhosts Include ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent <Directory "/var/www"> Order allow,deny Allow from all Require all granted </Directory> # Include generic snippets of statements Include conf.d/ # Include the virtual host configurations: Include sites-enabled/*.conf NameVirtualHost *:80 /etc/apache2/sites-available/site1.net.conf <VirtualHost *:80> ServerName site1.net ServerAlias site1.net *.site1.net DocumentRoot "/var/www/site1" ErrorLog "/var/www/site1/logs/error.log" CustomLog "/var/www/site1/logs/access.log" vhost_combined <Directory "/var/www/site1"> Options None AllowOverride All Order allow,deny Allow from all Satisfy Any </Directory> </VirtualHost> /etc/apache2/sites-available/site2.com.conf <VirtualHost *:80> ServerName site2.com ServerAlias site2.com *.site2.com DocumentRoot "/var/www/site2" ErrorLog "/var/www/site2/logs/error.log" CustomLog "/var/www/site2/logs/access.log" vhost_combined <Directory "/var/www/site2"> Options None AllowOverride All Order allow,deny Allow from all Satisfy Any </Directory> </VirtualHost> I've also tried setting NameVirtualHost like: Listen 80 NameVirtualHost 23.88.121.82:80 NameVirtualHost 127.0.0.1:80 and the VirtualHost Directives: <VirtualHost 23.88.121.82:80> ... </VirtualHost> for both sites, but that causes the first site to fail, as well. I'm wondering if I need to set up individual IPs for each site, possibly? I have 2 more IPv4 and 3 IPv6 addresses available, if that would make a difference. Also, in the grand scheme of things, I will need to enable SSL for the first site. I've been reading that I'll need to basically just mimic the directives for listening on port 80, only on port 443, and make sure mod_ssl is enabled? EDIT: I just ran apache2 -t to test the config files that way, and got the error: apache2: bad user name ${APACHE_RUN_USER}. However, apachectl configtest returns Syntax OK. There are no other mentions of errors with the mutex anywhere else, however. I was pretty sure if there was an error with the user apache was supposed to run under, the server wouldn't start at all... EDIT 2: Restarting apache fixed the bad user name error.

  Read the article

• West Wind WebSurge - an easy way to Load Test Web Applications

  - by Rick Strahl

  A few months ago on a project the subject of load testing came up. We were having some serious issues with a Web application that would start spewing SQL lock errors under somewhat heavy load. These sort of errors can be tough to catch, precisely because they only occur under load and not during typical development testing. To replicate this error more reliably we needed to put a load on the application and run it for a while before these SQL errors would flare up. It’s been a while since I’d looked at load testing tools, so I spent a bit of time looking at different tools and frankly didn’t really find anything that was a good fit. A lot of tools were either a pain to use, didn’t have the basic features I needed, or are extravagantly expensive. In  the end I got frustrated enough to build an initially small custom load test solution that then morphed into a more generic library, then gained a console front end and eventually turned into a full blown Web load testing tool that is now called West Wind WebSurge. I got seriously frustrated looking for tools every time I needed some quick and dirty load testing for an application. If my aim is to just put an application under heavy enough load to find a scalability problem in code, or to simply try and push an application to its limits on the hardware it’s running I shouldn’t have to have to struggle to set up tests. It should be easy enough to get going in a few minutes, so that the testing can be set up quickly so that it can be done on a regular basis without a lot of hassle. And that was the goal when I started to build out my initial custom load tester into a more widely usable tool. If you’re in a hurry and you want to check it out, you can find more information and download links here: West Wind WebSurge Product Page Walk through Video Download link (zip) Install from Chocolatey Source on GitHub For a more detailed discussion of the why’s and how’s and some background continue reading. How did I get here? When I started out on this path, I wasn’t planning on building a tool like this myself – but I got frustrated enough looking at what’s out there to think that I can do better than what’s available for the most common simple load testing scenarios. When we ran into the SQL lock problems I mentioned, I started looking around what’s available for Web load testing solutions that would work for our whole team which consisted of a few developers and a couple of IT guys both of which needed to be able to run the tests. It had been a while since I looked at tools and I figured that by now there should be some good solutions out there, but as it turns out I didn’t really find anything that fit our relatively simple needs without costing an arm and a leg… I spent the better part of a day installing and trying various load testing tools and to be frank most of them were either terrible at what they do, incredibly unfriendly to use, used some terminology I couldn’t even parse, or were extremely expensive (and I mean in the ‘sell your liver’ range of expensive). Pick your poison. There are also a number of online solutions for load testing and they actually looked more promising, but those wouldn’t work well for our scenario as the application is running inside of a private VPN with no outside access into the VPN. Most of those online solutions also ended up being very pricey as well – presumably because of the bandwidth required to test over the open Web can be enormous. When I asked around on Twitter what people were using– I got mostly… crickets. Several people mentioned Visual Studio Load Test, and most other suggestions pointed to online solutions. I did get a bunch of responses though with people asking to let them know what I found – apparently I’m not alone when it comes to finding load testing tools that are effective and easy to use. As to Visual Studio, the higher end skus of Visual Studio and the test edition include a Web load testing tool, which is quite powerful, but there are a number of issues with that: First it’s tied to Visual Studio so it’s not very portable – you need a VS install. I also find the test setup and terminology used by the VS test runner extremely confusing. Heck, it’s complicated enough that there’s even a Pluralsight course on using the Visual Studio Web test from Steve Smith. And of course you need to have one of the high end Visual Studio Skus, and those are mucho Dinero ($$$) – just for the load testing that’s rarely an option. Some of the tools are ultra extensive and let you run analysis tools on the target serves which is useful, but in most cases – just plain overkill and only distracts from what I tend to be ultimately interested in: Reproducing problems that occur at high load, and finding the upper limits and ‘what if’ scenarios as load is ramped up increasingly against a site. Yes it’s useful to have Web app instrumentation, but often that’s not what you’re interested in. I still fondly remember early days of Web testing when Microsoft had the WAST (Web Application Stress Tool) tool, which was rather simple – and also somewhat limited – but easily allowed you to create stress tests very quickly. It had some serious limitations (mainly that it didn’t work with SSL),  but the idea behind it was excellent: Create tests quickly and easily and provide a decent engine to run it locally with minimal setup. You could get set up and run tests within a few minutes. Unfortunately, that tool died a quiet death as so many of Microsoft’s tools that probably were built by an intern and then abandoned, even though there was a lot of potential and it was actually fairly widely used. Eventually the tools was no longer downloadable and now it simply doesn’t work anymore on higher end hardware. West Wind Web Surge – Making Load Testing Quick and Easy So I ended up creating West Wind WebSurge out of rebellious frustration… The goal of WebSurge is to make it drop dead simple to create load tests. It’s super easy to capture sessions either using the built in capture tool (big props to Eric Lawrence, Telerik and FiddlerCore which made that piece a snap), using the full version of Fiddler and exporting sessions, or by manually or programmatically creating text files based on plain HTTP headers to create requests. I’ve been using this tool for 4 months now on a regular basis on various projects as a reality check for performance and scalability and it’s worked extremely well for finding small performance issues. I also use it regularly as a simple URL tester, as it allows me to quickly enter a URL plus headers and content and test that URL and its results along with the ability to easily save one or more of those URLs. A few weeks back I made a walk through video that goes over most of the features of WebSurge in some detail: Note that the UI has slightly changed since then, so there are some UI improvements. Most notably the test results screen has been updated recently to a different layout and to provide more information about each URL in a session at a glance. The video and the main WebSurge site has a lot of info of basic operations. For the rest of this post I’ll talk about a few deeper aspects that may be of interest while also giving a glance at how WebSurge works. Session Capturing As you would expect, WebSurge works with Sessions of Urls that are played back under load. Here’s what the main Session View looks like: You can create session entries manually by individually adding URLs to test (on the Request tab on the right) and saving them, or you can capture output from Web Browsers, Windows Desktop applications that call services, your own applications using the built in Capture tool. With this tool you can capture anything HTTP -SSL requests and content from Web pages, AJAX calls, SOAP or REST services – again anything that uses Windows or .NET HTTP APIs. Behind the scenes the capture tool uses FiddlerCore so basically anything you can capture with Fiddler you can also capture with Web Surge Session capture tool. Alternately you can actually use Fiddler as well, and then export the captured Fiddler trace to a file, which can then be imported into WebSurge. This is a nice way to let somebody capture session without having to actually install WebSurge or for your customers to provide an exact playback scenario for a given set of URLs that cause a problem perhaps. Note that not all applications work with Fiddler’s proxy unless you configure a proxy. For example, .NET Web applications that make HTTP calls usually don’t show up in Fiddler by default. For those .NET applications you can explicitly override proxy settings to capture those requests to service calls. The capture tool also has handy optional filters that allow you to filter by domain, to help block out noise that you typically don’t want to include in your requests. For example, if your pages include links to CDNs, or Google Analytics or social links you typically don’t want to include those in your load test, so by capturing just from a specific domain you are guaranteed content from only that one domain. Additionally you can provide url filters in the configuration file – filters allow to provide filter strings that if contained in a url will cause requests to be ignored. Again this is useful if you don’t filter by domain but you want to filter out things like static image, css and script files etc. Often you’re not interested in the load characteristics of these static and usually cached resources as they just add noise to tests and often skew the overall url performance results. In my testing I tend to care only about my dynamic requests. SSL Captures require Fiddler Note, that in order to capture SSL requests you’ll have to install the Fiddler’s SSL certificate. The easiest way to do this is to install Fiddler and use its SSL configuration options to get the certificate into the local certificate store. There’s a document on the Telerik site that provides the exact steps to get SSL captures to work with Fiddler and therefore with WebSurge. Session Storage A group of URLs entered or captured make up a Session. Sessions can be saved and restored easily as they use a very simple text format that simply stored on disk. The format is slightly customized HTTP header traces separated by a separator line. The headers are standard HTTP headers except that the full URL instead of just the domain relative path is stored as part of the 1st HTTP header line for easier parsing. Because it’s just text and uses the same format that Fiddler uses for exports, it’s super easy to create Sessions by hand manually or under program control writing out to a simple text file. You can see what this format looks like in the Capture window figure above – the raw captured format is also what’s stored to disk and what WebSurge parses from. The only ‘custom’ part of these headers is that 1st line contains the full URL instead of the domain relative path and Host: header. The rest of each header are just plain standard HTTP headers with each individual URL isolated by a separator line. The format used here also uses what Fiddler produces for exports, so it’s easy to exchange or view data either in Fiddler or WebSurge. Urls can also be edited interactively so you can modify the headers easily as well: Again – it’s just plain HTTP headers so anything you can do with HTTP can be added here. Use it for single URL Testing Incidentally I’ve also found this form as an excellent way to test and replay individual URLs for simple non-load testing purposes. Because you can capture a single or many URLs and store them on disk, this also provides a nice HTTP playground where you can record URLs with their headers, and fire them one at a time or as a session and see results immediately. It’s actually an easy way for REST presentations and I find the simple UI flow actually easier than using Fiddler natively. Finally you can save one or more URLs as a session for later retrieval. I’m using this more and more for simple URL checks. Overriding Cookies and Domains Speaking of HTTP headers – you can also overwrite cookies used as part of the options. One thing that happens with modern Web applications is that you have session cookies in use for authorization. These cookies tend to expire at some point which would invalidate a test. Using the Options dialog you can actually override the cookie: which replaces the cookie for all requests with the cookie value specified here. You can capture a valid cookie from a manual HTTP request in your browser and then paste into the cookie field, to replace the existing Cookie with the new one that is now valid. Likewise you can easily replace the domain so if you captured urls on west-wind.com and now you want to test on localhost you can do that easily easily as well. You could even do something like capture on store.west-wind.com and then test on localhost/store which would also work. Running Load Tests Once you’ve created a Session you can specify the length of the test in seconds, and specify the number of simultaneous threads to run each session on. Sessions run through each of the URLs in the session sequentially by default. One option in the options list above is that you can also randomize the URLs so each thread runs requests in a different order. This avoids bunching up URLs initially when tests start as all threads run the same requests simultaneously which can sometimes skew the results of the first few minutes of a test. While sessions run some progress information is displayed: By default there’s a live view of requests displayed in a Console-like window. On the bottom of the window there’s a running total summary that displays where you’re at in the test, how many requests have been processed and what the requests per second count is currently for all requests. Note that for tests that run over a thousand requests a second it’s a good idea to turn off the console display. While the console display is nice to see that something is happening and also gives you slight idea what’s happening with actual requests, once a lot of requests are processed, this UI updating actually adds a lot of CPU overhead to the application which may cause the actual load generated to be reduced. If you are running a 1000 requests a second there’s not much to see anyway as requests roll by way too fast to see individual lines anyway. If you look on the options panel, there is a NoProgressEvents option that disables the console display. Note that the summary display is still updated approximately once a second so you can always tell that the test is still running. Test Results When the test is done you get a simple Results display: On the right you get an overall summary as well as breakdown by each URL in the session. Both success and failures are highlighted so it’s easy to see what’s breaking in your load test. The report can be printed or you can also open the HTML document in your default Web Browser for printing to PDF or saving the HTML document to disk. The list on the right shows you a partial list of the URLs that were fired so you can look in detail at the request and response data. The list can be filtered by success and failure requests. Each list is partial only (at the moment) and limited to a max of 1000 items in order to render reasonably quickly. Each item in the list can be clicked to see the full request and response data: This particularly useful for errors so you can quickly see and copy what request data was used and in the case of a GET request you can also just click the link to quickly jump to the page. For non-GET requests you can find the URL in the Session list, and use the context menu to Test the URL as configured including any HTTP content data to send. You get to see the full HTTP request and response as well as a link in the Request header to go visit the actual page. Not so useful for a POST as above, but definitely useful for GET requests. Finally you can also get a few charts. The most useful one is probably the Request per Second chart which can be accessed from the Charts menu or shortcut. Here’s what it looks like:   Results can also be exported to JSON, XML and HTML. Keep in mind that these files can get very large rather quickly though, so exports can end up taking a while to complete. Command Line Interface WebSurge runs with a small core load engine and this engine is plugged into the front end application I’ve shown so far. There’s also a command line interface available to run WebSurge from the Windows command prompt. Using the command line you can run tests for either an individual URL (similar to AB.exe for example) or a full Session file. By default when it runs WebSurgeCli shows progress every second showing total request count, failures and the requests per second for the entire test. A silent option can turn off this progress display and display only the results. The command line interface can be useful for build integration which allows checking for failures perhaps or hitting a specific requests per second count etc. It’s also nice to use this as quick and dirty URL test facility similar to the way you’d use Apache Bench (ab.exe). Unlike ab.exe though, WebSurgeCli supports SSL and makes it much easier to create multi-URL tests using either manual editing or the WebSurge UI. Current Status Currently West Wind WebSurge is still in Beta status. I’m still adding small new features and tweaking the UI in an attempt to make it as easy and self-explanatory as possible to run. Documentation for the UI and specialty features is also still a work in progress. I plan on open-sourcing this product, but it won’t be free. There’s a free version available that provides a limited number of threads and request URLs to run. A relatively low cost license  removes the thread and request limitations. Pricing info can be found on the Web site – there’s an introductory price which is $99 at the moment which I think is reasonable compared to most other for pay solutions out there that are exorbitant by comparison… The reason code is not available yet is – well, the UI portion of the app is a bit embarrassing in its current monolithic state. The UI started as a very simple interface originally that later got a lot more complex – yeah, that never happens, right? Unless there’s a lot of interest I don’t foresee re-writing the UI entirely (which would be ideal), but in the meantime at least some cleanup is required before I dare to publish it :-). The code will likely be released with version 1.0. I’m very interested in feedback. Do you think this could be useful to you and provide value over other tools you may or may not have used before? I hope so – it already has provided a ton of value for me and the work I do that made the development worthwhile at this point. You can leave a comment below, or for more extensive discussions you can post a message on the West Wind Message Board in the WebSurge section Microsoft MVPs and Insiders get a free License If you’re a Microsoft MVP or a Microsoft Insider you can get a full license for free. Send me a link to your current, official Microsoft profile and I’ll send you a not-for resale license. Send any messages to [email protected]. Resources For more info on WebSurge and to download it to try it out, use the following links. West Wind WebSurge Home Download West Wind WebSurge Getting Started with West Wind WebSurge Video© Rick Strahl, West Wind Technologies, 2005-2014Posted in ASP.NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• 26 Days: Countdown to Oracle OpenWorld 2012

  - by Michael Snow

  Welcome to our countdown to Oracle OpenWorld! Oracle OpenWorld 2012 is just around the corner. In less than 26 days, San Francisco will be invaded by an expected 50,000 people from all over the world. Here on the Oracle WebCenter team, we’ve all been working to help make the experience a great one for all our WebCenter customers. For a sneak peak  – we’ll be spending this week giving you a teaser of what to look forward to if you are joining us in San Francisco from September 30th through October 4th. We have Oracle WebCenter sessions covering all topics imaginable. Take a look and use the tools we provide to build out your schedule in advance and reserve your seats in your favorite sessions.  That gives you plenty of time to plan for your week with us in San Francisco. If unfortunately, your boss denied your request to attend - there are still some ways that you can join in the experience virtually On-Demand. This year - we are expanding even more up North of Market Street and will be taking over Union Square as well. Check out this map of San Francisco to get a sense of how much of a footprint Oracle OpenWorld has grown to this year. With so much to see and so many sessions to learn from - its no wonder that people get excited. Add to that a good mix of fun and all of the possible WebCenter sessions you could attend - you won't want to sleep at all to take full advantage of such an opportunity. We'll also have our annual WebCenter Customer Appreciation reception - stay tuned this week for some more info on registration to make sure you'll be able to join us. If you've been following the America's Cup at all and believe in EXTREME PERFORMANCE you'll definitely want to take a look at this video from last year's OpenWorld Keynote. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Important OpenWorld Links:  Attendee / Presenters Toolkit Oracle Schedule Builder WebCenter Sessions (listed in the catalog under Fusion Middleware as "Portals, Sites, Content, and Collaboration" ) Oracle Music Festival - AMAZING Line up!!  Oracle Customer Appreciation Night -LOOK HERE!! Oracle OpenWorld LIVE On-Demand Here are all the WebCenter sessions broken down by day for your viewing pleasure. Monday, October 1st CON8885 - Simplify CRM Engagement with Contextual Collaboration Are your sales teams disconnected and disengaged? Do you want a tool for easily connecting expertise across your organization and providing visibility into the complete sales process? Do you want a way to enhance and retain organization knowledge? Oracle Social Network is the answer. Attend this session to learn how to make CRM easy, effective, and efficient for use across virtual sales teams. Also learn how Oracle Social Network can drive sales force collaboration with natural conversations throughout the sales cycle, promote sales team productivity through purposeful social networking without the noise, and build cross-team knowledge by integrating conversations with CRM and other business applications. CON8268 - Oracle WebCenter Strategy: Engaging Your Customers. Empowering Your Business Oracle WebCenter is a user engagement platform for social business, connecting people and information. Attend this session to learn about the Oracle WebCenter strategy, and understand where Oracle is taking the platform to help companies engage customers, empower employees, and enable partners. Business success starts with ensuring that everyone is engaged with the right people and the right information and can access what they need through the channel of their choice—Web, mobile, or social. Are you giving customers, employees, and partners the best-possible experience? Come learn how you can! ¶ HOL10208 - Add Social Capabilities to Your Enterprise Applications Oracle Social Network enables you to add real-time collaboration capabilities into your enterprise applications, so that conversations can happen directly within your business systems. In this hands-on lab, you will try out the Oracle Social Network product to collaborate with other attendees, using real-time conversations with document sharing capabilities. Next you will embed social capabilities into a sample Web-based enterprise application, using embedded UI components. Experts will also write simple REST-based integrations, using the Oracle Social Network API to programmatically create social interactions. ¶ CON8893 - Improve Employee Productivity with Intuitive and Social Work Environments Social technologies have already transformed the ways customers, employees, partners, and suppliers communicate and stay informed. Forward-thinking organizations today need technologies and infrastructures to help them advance to the next level and integrate social activities with business applications to deliver a user experience that simplifies business processes and enterprise application engagement. Attend this session to hear from an innovative Oracle Social Network customer and learn how you can improve productivity with intuitive and social work environments and empower your employees with innovative social tools to enable contextual access to content and dynamic personalization of solutions. ¶ CON8270 - Oracle WebCenter Content Strategy and Vision Oracle WebCenter provides a strategic content infrastructure for managing documents, images, e-mails, and rich media files. With a single repository, organizations can address any content use case, such as accounts payable, HR onboarding, document management, compliance, records management, digital asset management, or Website management. In this session, learn about future plans for how Oracle WebCenter will address new use cases as well as new integrations with Oracle Fusion Middleware and Oracle Applications, leveraging your investments by making your users more productive and error-free. ¶ CON8269 - Oracle WebCenter Sites Strategy and Vision Oracle’s Web experience management solution, Oracle WebCenter Sites, enables organizations to use the online channel to drive customer acquisition and brand loyalty. It helps marketers and business users easily create and manage contextually relevant, social, interactive online experiences across multiple channels on a global scale. In this session, learn about future plans for how Oracle WebCenter Sites will provide you with the tools, capabilities, and integrations you need in order to continue to address your customers’ evolving requirements for engaging online experiences and keep moving your business forward. ¶ CON8896 - Living with SharePoint SharePoint is a popular platform, but it’s not always the best fit for Oracle customers. In this session, you’ll discover the technical and nontechnical limitations and pitfalls of SharePoint and learn about Oracle alternatives for collaboration, portals, enterprise and Web content management, social computing, and application integration. The presentation shows you how to integrate with SharePoint when business or IT requirements dictate and covers cloud-based (Office 365) and on-premises versions of SharePoint. Presented by a former Microsoft director of SharePoint product management and backed by independent customer research, this session will prepare you to answer the question “Why don’t we just use SharePoint for that?’ the next time it comes up in your organization. ¶ CON7843 - Content-Enabling Enterprise Processes with Oracle WebCenter Organizations today continually strive to automate business processes, reduce costs, and improve efficiency. Many business processes are content-intensive and unstructured, requiring ad hoc collaboration, and distributed in nature, requiring many approvals and generating huge volumes of paper. In this session, learn how Oracle and SYSTIME have partnered to help a customer content-enable its enterprise with Oracle WebCenter Content and Oracle WebCenter Imaging 11g and integrate them with Oracle Applications. ¶ CON6114 - Tape Robotics’ Newest Superhero: Now Fueled by Oracle Software For small, midsize, and rapidly growing businesses that want the most energy-efficient, scalable storage infrastructure to meet their rapidly growing data demands, Oracle’s most recent addition to its award-winning tape portfolio leverages several pieces of Oracle software. With Oracle Linux, Oracle WebLogic, and Oracle Fusion Middleware tools, the library achieves a higher level of usability than previous products while offering customers a familiar interface for management, plus ease of use. This session examines the competitive advantages of the tape library and how Oracle software raises customer satisfaction. Learn how the combination of Oracle engineered systems, Oracle Secure Backup, and Oracle’s StorageTek tape libraries provide end-to-end coverage of your data. ¶ CON9437 - Mobile Access Management With more than five billion mobile devices on the planet and an increasing number of users using their own devices to access corporate data and applications, securely extending identity management to mobile devices has become a hot topic. This session focuses on how to extend your existing identity management infrastructure and policies to securely and seamlessly enable mobile user access. CON7815 - Customer Experience Online in Cloud: Oracle WebCenter Sites, Oracle ATG Apps, Oracle Exalogic Oracle WebCenter Sites and Oracle’s ATG product line together can provide a compelling marketing and e-commerce experience. When you couple them with the extreme performance of Oracle Exalogic, you’ll see unmatched scalability that provides you with a true cloud-based solution. In this session, you’ll learn how running Oracle WebCenter Sites and ATG applications on Oracle Exalogic delivers both a private and a public cloud experience. Find out what it takes to get these systems working together and delivering engaging Web experiences. Even if you aren’t considering Oracle Exalogic today, the rich Web experience of Oracle WebCenter, paired with the depth of the ATG product line, can provide your business full support, from merchandising through sale completion. ¶ CON8271 - Oracle WebCenter Portal Strategy and Vision To innovate and keep a competitive edge, organizations need to leverage the power of agile and responsive Web applications. Oracle WebCenter Portal enables you to do just that, by delivering intuitive user experiences for enterprise applications to drive innovation with composite applications and mashups. Attend this session to learn firsthand from customers how Oracle WebCenter Portal extends the value of existing enterprise applications, business processes, and content; delivers a superior business user experience; and maximizes limited IT resources. ¶ CON8880 - The Connected Customer Experience Begins with the Online Channel There’s a lot of talk these days about how to connect the customer journey across various touchpoints—from Websites and e-commerce to call centers and in-store—to provide experiences that are more relevant and engaging and ultimately gain competitive edge. Doing it all at once isn’t a realistic objective, so where do you start? Come to this session, and hear about three steps you can take that can help you begin your journey toward delivering the connected customer experience. You’ll hear how Oracle now has an integrated digital marketing platform for your corporate Website, your e-commerce site, your self-service portal, and your marketing and loyalty campaigns, and you’ll learn what you can do today to begin executing on your customer experience initiatives. ¶ GEN11451 - General Session: Building Mobile Applications with Oracle Cloud With the prevalence of smart mobile devices, companies are facing an increased demand to provide access to data and applications from new channels. However, developing applications for mobile devices poses some unique challenges. Come to this session to learn how Oracle addresses these challenges, offering a simpler way to develop and deploy cross-device mobile applications. See how Oracle Cloud enables you to access applications, data, and services from mobile channels in an easier way.  CON8272 - Oracle Social Network Strategy and Vision One key way of increasing employee productivity is by bringing people, processes, and information together—providing new social capabilities to enable business users to quickly correspond and collaborate on business activities. Oracle WebCenter provides a user engagement platform with social and collaborative technologies to empower business users to focus on their key business processes, applications, and content in the context of their role and process. Attend this session to hear how the latest social capabilities in Oracle Social Network are enabling organizations to transform themselves into social businesses.  --- Tuesday, October 2nd HOL10194 - Enterprise Content Management Simplified: Oracle WebCenter Content’s Next-Generation UI Regardless of the nature of your business, unstructured content underpins many of its daily functions. Whether you are working with traditional presentations, spreadsheets, or text documents—or even with digital assets such as images and multimedia files—your content needs to be accessible and manageable in convenient and intuitive ways to make working with the content easier. Additionally, you need the ability to easily share documents with coworkers to facilitate a collaborative working environment. Come to this session to see how Oracle WebCenter Content’s next-generation user interface helps modern knowledge workers easily manage personal and enterprise documents in a collaborative environment.¶ CON8877 - Develop a Mobile Strategy with Oracle WebCenter: Engage Customers, Employees, and Partners Mobile technology has gone from nice-to-have to a cornerstone of user engagement. Mobile access enables users to have information available at their fingertips, enabling them to take action the moment they make a decision, interact in the moment of convenience, and take advantage of new service offerings in their preferred channels. All your employees have your mobile applications in their pocket; now what are you going to do? It is a critical step for companies to think through what their employees, customers, and partners really need on their devices. Attend this session to see how Oracle WebCenter enables you to better engage your customers, employees, and partners by providing a unified experience across multiple channels. ¶ CON9447 - Enabling Access for Hundreds of Millions of Users How do you grow your business by identifying, authenticating, authorizing, and federating users on the Web, leveraging social identity and the open source OAuth protocol? How do you scale your access management solution to support hundreds of millions of users? With social identity support out of the box, Oracle’s access management solution is also benchmarked for 250-million-user deployment according to real-world customer scenarios. In this session, you will learn about the social identity capability and the 250-million-user benchmark testing of Oracle Access Manager and Oracle Adaptive Access Manager running on Oracle Exalogic and Oracle Exadata. ¶ HOL10207 - Build an Intranet Portal with Oracle WebCenter In this hands-on lab, you’ll work with Oracle WebCenter Portal and Oracle WebCenter Content to build out an enterprise portal that maximizes the productivity of teams and individual contributors. Using browser-based tools, you’ll manage site resources such as page styles, templates, and navigation. You’ll edit content stored in Oracle WebCenter Content directly from your portal. You’ll also experience the latest features that promote collaboration, social networking, and personal productivity. ¶ CON2906 - Get Proactive: Best Practices for Maintaining Oracle Fusion Middleware You chose Oracle Fusion Middleware products to help your organization deliver superior business results. Now learn how to take full advantage of your software with all the great tools, resources, and product updates you’re entitled to through Oracle Support. In this session, Oracle product experts provide proven best practices to help you work more efficiently, plan and prepare for upgrades and patching more effectively, and manage risk. Topics include configuration management tools, remote diagnostics, My Oracle Support Community, and My Oracle Support Lifecycle Advisors. New users and Oracle Fusion Middleware experts alike are guaranteed to leave with fresh ideas and practical, easy-to-implement next steps. ¶ CON8878 - Oracle WebCenter’s Cloud Strategy: From Social and Platform Services to Mashups Cloud computing represents a paradigm shift in how we build applications, automate processes, collaborate, and share and in how we secure our enterprise. Additionally, as you adopt cloud-based services in your organization, it’s likely that you will still have many critical on-premises applications running. With these mixed environments, multiple user interfaces, different security, and multiple datasources and content sources, how do you start evolving your strategy to account for these challenges? Oracle WebCenter offers a complete array of technologies enabling you to solve these challenges and prepare you for the cloud. Attend this session to learn how you can use Oracle WebCenter in the cloud as well as create on-premises and cloud application mash-ups. ¶ CON8901 - Optimize Enterprise Business Processes with Oracle WebCenter and Oracle BPM Do you have business processes that span multiple applications? Are you grappling with how to have visibility across these business processes; how to manage content that is associated with these processes; and, most importantly, how to model and optimize these business processes? Attend this session to hear how Oracle WebCenter and Oracle Business Process Management provide a unique set of integrated solutions to provide a composite application dashboard across these business processes and offer a solution for content-centric business processes. ¶ CON8883 - Deliver Engaging Interfaces to Oracle Applications with Oracle WebCenter Critical business processes live within enterprise applications, and application users need to manage and execute these processes as effectively as possible. Oracle provides a comprehensive user engagement platform to increase user productivity and optimize overall processes within Oracle Applications—Oracle E-Business Suite and Oracle’s Siebel, PeopleSoft, and JD Edwards product families—and third-party applications. Attend this session to learn how you can integrate these applications with Oracle WebCenter to deliver composite application dashboards to your end users—whether they are your customers, partners, or employees—for enhanced usability and Web 2.0–enabled enterprise portals.¶ Wednesday, October 3rd CON8895 - Future-Ready Intranets: How Aramark Re-engineered the Application Landscape There are essential techniques and technologies you can use to deliver employee portals that garner higher productivity, improve business efficiency, and increase user engagement. Attend this session to learn how you can leverage Oracle WebCenter Portal as a user engagement platform for bringing together business process management, enterprise content management, and business intelligence into a highly relevant and integrated experience. Hear how Aramark has leveraged Oracle WebCenter Portal and Oracle WebCenter Content to deliver a unified workspace providing simpler navigation and processing, consolidation of tools, easy access to information, integrated search, and single sign-on. ¶ CON8886 - Content Consolidation: Save Money, Increase Efficiency, and Eliminate Silos Organizations are looking for ways to save money and be more efficient. With content in many different places, it’s difficult to know where to look for a document and whether the document is the most current version. With Oracle WebCenter, content can be consolidated into one best-of-breed repository that is secure, scalable, and integrated with your business processes and applications. Users can find the content they need, where they need it, and ensure that it is the right content. This session covers content challenges that affect your business; content consolidation that can lead to savings in storage and administration costs and can lower risks; and how companies are realizing savings. ¶ CON8911 - Improve Online Experiences for Customers and Partners with Self-Service Portals Are you able to provide your customers and partners an easy-to-use online self-service experience? Are you processing high-volume transactions and struggling with call center bottlenecks or back-end systems that won’t integrate, causing order delays and customer frustration? Are you looking to target content such as product and service offerings to your end users? This session shares approaches to providing targeted delivery as well as strategies and best practices for transforming your business by providing an intuitive user experience for your customers and partners. ¶ CON6156 - Top 10 Ways to Integrate Oracle WebCenter Content This session covers 10 common ways to integrate Oracle WebCenter Content with other enterprise applications and middleware. It discusses out-of-the-box modules that provide expanded features in Oracle WebCenter Content—such as enterprise search, SOA, and BPEL—as well as developer tools you can use to create custom integrations. The presentation also gives guidance on which integration option may work best in your environment. ¶ HOL10207 - Build an Intranet Portal with Oracle WebCenter In this hands-on lab, you’ll work with Oracle WebCenter Portal and Oracle WebCenter Content to build out an enterprise portal that maximizes the productivity of teams and individual contributors. Using browser-based tools, you’ll manage site resources such as page styles, templates, and navigation. You’ll edit content stored in Oracle WebCenter Content directly from your portal. You’ll also experience the latest features that promote collaboration, social networking, and personal productivity. ¶ CON7817 - Migration to Oracle WebCenter Imaging 11g Customers today continually strive to automate business processes, reduce costs, and improve efficiency. The accounts payable process—which is often distributed in nature, requires many approvals, and generates huge volumes of paper invoices—is automated by many customers. In this session, learn how Oracle and SYSTIME have partnered to help a customer migrate its existing Oracle Imaging and Process Management Release 7.6 to the latest Oracle WebCenter Imaging 11g and integrate it with Oracle’s JD Edwards family of products. ¶ CON8910 - How to Engage Customers Across Web, Mobile, and Social Channels Whether on desktops at the office, on tablets at home, or on mobile phones when on the go, today’s customers are always connected. To engage today’s customers, you need to make the online customer experience connected and consistent across a host of devices and multiple channels, including Web, mobile, and social networks. Managing this multichannel environment can result in lots of headaches without the right tools. Attend this session to learn how Oracle WebCenter Sites solves the challenge of multichannel customer engagement. ¶ HOL10206 - Oracle WebCenter Sites 11g: Transforming the Content Contributor Experience Oracle WebCenter Sites 11g makes it easy for marketers and business users to contribute to and manage Websites with the new visual, contextual, and intuitive Web authoring interface. In this hands-on lab, you will create and manage content for a sports-themed Website, using many of the new and enhanced features of the 11g release. ¶ CON8900 - Building Next-Generation Portals: An Interactive Customer Panel Discussion Social and collaborative technologies have changed how people interact, learn, and collaborate, and providing a modern, social Web presence is imperative to remain competitive in today’s market. Can your business benefit from a more collaborative and interactive portal environment for employees, customers, and partners? Attend this session to hear from Oracle WebCenter Portal customers as they share their strategies and best practices for providing users with a modern experience that adapts to their needs and includes personalized access to content in context. The panel also addresses how customers have benefited from creating next-generation portals by migrating from older portal technologies to Oracle WebCenter Portal. ¶ CON9625 - Taking Control of Oracle WebCenter Security Organizations are increasingly looking to extend their Oracle WebCenter portal for social business, to serve external users and provide seamless access to the right information. In particular, many organizations are extending Oracle WebCenter in a business-to-business scenario requiring secure identification and authorization of business partners and their users. This session focuses on how customers are leveraging, securing, and providing access control to Oracle WebCenter portal and mobile solutions. You will learn best practices and hear real-world examples of how to provide flexible and granular access control for Oracle WebCenter deployments, using Oracle Platform Security Services and Oracle Access Management Suite product offerings. ¶ CON8891 - Extending Social into Enterprise Applications and Business Processes Oracle Social Network is an extensible social platform that enables contextual collaboration within enterprise applications and business processes, providing relevant data from across various enterprise systems in one place. Attend this session to see how an Oracle Social Network customer is integrating multiple applications—such as CRM, HCM, and business processes—into Oracle Social Network and Oracle WebCenter to enable individuals and teams to solve complex cross-organizational business problems more effectively by utilizing the social enterprise. ¶ Thursday, October 4th CON8899 - Becoming a Social Business: Stories from the Front Lines of Change What does it really mean to be a social business? How can you change our organization to embrace social approaches? What pitfalls do you need to avoid? In this lively panel discussion, customer and industry thought leaders in social business explore these topics and more as they share their stories of the good, the bad, and the ugly that can happen when embracing social methods and technologies to improve business success. Using moderated questions and open Q&A from the audience, the panel discusses vital topics such as the critical factors for success, the major issues to avoid, how to gain senior executive support for social efforts, how to handle undesired behavior, and how to measure business impact. It takes a thought-provoking look at becoming a social business from the inside. ¶ CON6851 - Oracle WebCenter and Oracle Business Intelligence Enterprise Edition to Create Vendor Portals Large manufacturers of grocery items routinely find themselves depending on the inventory management expertise of their wholesalers and distributors. Inventory costs can be managed more efficiently by the manufacturers if they have better insight into the inventory levels of items carried by their distributors. This creates a unique opportunity for distributors and wholesalers to leverage this knowledge into a revenue-generating subscription service. Oracle Business Intelligence Enterprise Edition and Oracle WebCenter Portal play a key part in enabling creation of business-managed business intelligence portals for vendors. This session discusses one customer that implemented this by leveraging Oracle WebCenter and Oracle Business Intelligence Enterprise Edition. ¶ CON8879 - Provide a Personalized and Consistent Customer Experience in Your Websites and Portals Your customers engage with your company online in different ways throughout their journey—from prospecting by acquiring information on your corporate Website to transacting through self-service applications on your customer portal—and then the cycle begins again when they look for new products and services. Ensuring that the customer experience is consistent and personalized across online properties—from branding and content to interactions and transactions—can be a daunting task. Oracle WebCenter enables you to speak and interact with your customers with one voice across your Websites and portals by providing an integrated platform for delivery of self-service and engagement that unifies and personalizes the online experience. Learn more in this session. ¶ CON8898 - Land Mines, Potholes, and Dirt Roads: Navigating the Way to ECM Nirvana Ten years ago, people were predicting that by this time in history, we’d be some kind of utopian paperless society. As we all know, we’re not there yet, but are we getting closer? What is keeping companies from driving down the road to enterprise content management bliss? Most people understand that using ECM as a central platform enables organizations to expedite document-centric processes, but most business processes in organizations are still heavily paper-based. Many of these processes could be automated and improved with an ECM platform infrastructure. In this panel discussion, you’ll hear from Oracle WebCenter customers that have already solved some of these challenges as they share their strategies for success and roads to avoid along your journey. ¶ CON8908 - Oracle WebCenter Portal: Creating and Using Content Presenter Templates Oracle WebCenter Portal applications use task flows to display and integrate content stored in the Oracle WebCenter Content server. Among the most flexible task flows is Content Presenter, which renders various types of content on an Oracle WebCenter Portal page. Although Oracle WebCenter Portal comes with a set of predefined Content Presenter templates, developers can create their own templates for specific rendering needs. This session shows the lifecycle of developing Content Presenter task flows, including how to create, package, import, modify at runtime, and use such templates. In addition to simple examples with Oracle Application Development Framework (Oracle ADF) UI elements to render the content, it shows how to use other UI technologies, CSS files, and JavaScript libraries. ¶ CON8897 - Using Web Experience Management to Drive Online Marketing Success Every year, the online channel becomes more imperative for driving organizational top-line revenue, but for many companies, mastering how to best market their products and services in a fast-evolving online world with high customer expectations for personalized experiences can be a complex proposition. Come to this panel discussion, and hear directly from online marketers how they are succeeding today by using Web experience management to drive marketing success, using capabilities such as targeting and optimization, user-generated content, mobile site publishing, and site visitor personalization to deliver engaging online experiences. ¶ CON8892 - Oracle’s Journey to Social Business Social business is a revolution, one that is causing rapidly accelerating change in how companies and customers engage with one another and how employees work together. Oracle’s goal in becoming a social business is to create a socially connected organization in which working collaboratively across geographical locations, lines of business, and management chains is second nature, enabling innovative solutions to business challenges. We can achieve this by connecting the right people, finding the right content, communicating with the right people, collaborating at the right time, and building the right communities in the right context—all ready in the CLOUD. Attend this session to see how Oracle is transforming itself into a social business. ¶  ------------ If you've read all the way to the end here - we are REALLY looking forward to seeing you in San Francisco.

  Read the article

< Previous Page | 667 668 669 670 671 672 673 674 675 676  | Next Page >