Search Results

Search found 20168 results on 807 pages for 'service'.

Page 672/807 | < Previous Page | 668 669 670 671 672 673 674 675 676 677 678 679  | Next Page >

• Server 2008 R2 Dns Lockup

  - by Richard Maynard

  Hi, We've deployed our first 2008 R2 server on a client site which has replaced their existing 2003 DC. This server provides DNS resolution services to all client machines on that site for general internet usage. Since using the 2008 R2 DNS services we have noticed every couple of days the DNS server starts timing out when requests to certain sites are made (google is the only example I can provide at this time although it seems to be larger sites with problems rather than small - CDN compatiblity issue?). When you restart the DNS Server service then resolution returns to normal... just only for a day or so. Is anybody aware of any significant changes to the DNS server architecture or configuration out of the box in R2 that may explain this intermittent behaviour? I have already tried the fix listed here to no avail: http://weblogs.asp.net/owscott/archive/2009/09/15/windows-server-2008-r2-dns-issues.aspx The following PS command prompt info illustrates the issue: PS C:\Users\Administrator.UK> nslookup Default Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 > www.google.com Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 Non-authoritative answer: Name: www.l.google.com Addresses: 66.102.9.99 66.102.9.104 66.102.9.105 66.102.9.103 66.102.9.147 Aliases: www.google.com > www.google.co.uk Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 * s8209001.uk.kingdomfaith.com can't find www.google.co.uk: Server failed Thanks in advance. Regards,

  Read the article

• How do I renew an expired Ubuntu OpenLDAP SSL Certificate

  - by Doug Symes

  We went through the steps of revoking an SSL Certificate used by our OpenLDAP server and renewing it but we are unable to start slapd. Here are the commands we used: openssl verify hostname_domain_com_cert.pem We got back that the certificate was expired but "OK" We revoked the certificate we'd been using: openssl ca -revoke /etc/ssl/certs/hostname_domain_com_cert.pem Revoking worked fine. We created the new Cert Request by passing it the key file as input: openssl req -new -key hostname_domain_com_key.pem -out newreq.pem We generated a new certificate using the newly created request file "newreq.pem" openssl ca -policy policy_anything -out newcert.pem -infiles newreq.pem We looked at our cn=config.ldif file and found the locations for the key and cert and placed the newly dated certificate in the needed path. Still we are unable to start slapd with: service slapd start We get this message: Starting OpenLDAP: slapd - failed. The operation failed but no output was produced. For hints on what went wrong please refer to the system's logfiles (e.g. /var/log/syslog) or try running the daemon in Debug mode like via "slapd -d 16383" (warning: this will create copious output). Below, you can find the command line options used by this script to run slapd. Do not forget to specify those options if you want to look to debugging output: slapd -h 'ldap:/// ldapi:/// ldaps:///' -g openldap -u openldap -F /etc/ldap/slapd.d/ Here is what we found in /var/log/syslog Oct 23 20:18:25 ldap1 slapd[2710]: @(#) $OpenLDAP: slapd 2.4.21 (Dec 19 2011 15:40:04) $#012#011buildd@allspice:/build/buildd/openldap-2.4.21/debian/build/servers/slapd Oct 23 20:18:25 ldap1 slapd[2710]: main: TLS init def ctx failed: -1 Oct 23 20:18:25 ldap1 slapd[2710]: slapd stopped. Oct 23 20:18:25 ldap1 slapd[2710]: connections_destroy: nothing to destroy. We are not sure what else to try. Any ideas?

  Read the article

• Too much memory consumed during TFS automated build

  - by Bernard Chen

  We're running TFS 2010 Standard Edition, and we've set up an automated build to run whenever someone checks in code. We run through all of the automated tests (built with MSTest) as part of the build. We've configured the build to run the tests as a 64-bit process, but the QTAgent.exe that runs the tests grows in memory while the tests are running. It is currently reaching 8GB for the ~650 tests we have, and the process has slowed significantly when we went from 450 tests to 650 tests. When we run all of the tests in the local development environment, memory seems to be freed at least with each TestClass and never exceeds a certain level. The process of running all tests has not increased significantly in the local development environment. Is there a way to configure the build service to free up memory with each Test or each TestClass? With the way things are currently running, the build process gets very slow when we start to run out of memory on the machine. Edit: I found the MSTest invocation in the build log and ran it manually and saw the same behavior of runaway memory. I removed the /publish, /publishbuild, /teamproject, /platform, and /flavor parameters from the invocation of MSTest, in case the test runner was holding onto results until the end, but the behavior didn't change. I ran the same command line on a dev box, separate from the build server, and the memory freed up frequently. It seems there must be something wrong/different about the build server that is causing it to behave different, but I'm stumped where to look. I've looked at qtagent.exe.config, mstest.exe.config, versions of both executables. What else might affect this?

  Read the article

• VSS Post Backup failures for Virtual Server 2005 R2 SP1 virtual machines

  - by califguy4christ

  We've been seeing strange errors with Volume Shadow Copy services on our Virtual Server 2005 R2 SP1 host. It appears to be failing on a strange mountpoint in the C:\WINDOWS\Temp\ folders, which I believe is used by VSS to mount a writeable image file. To summarize: The Microsoft Virtual Server 2005 Writer continually goes into a failed retryable state The Virtual Server log reports errors during the Post Backup phase VSS reports errors backing up a mount point of unknown origins The mount point causes NTFS and ftdisk errors The host is x86 Windows Server 2003 Standard, SP2. The virtual machine is the same. Both use basic disks. Here is the writer state: Writer name: 'Microsoft Virtual Server 2005 Writer' Writer Id: {76afb926-87ad-4a20-a50f-cdc69412ddfc} Writer Instance Id: {78df98e2-bf19-4804-890b-15865efef3bd} State: [11] Failed Last error: Retryable error From the Virtual Server log: Virtual Server - Vss Writer - Event ID: 1035: The VSS writer for Virtual Server failed during the PostBackup phase. The guest shadow copies did not get exposed on the host machine, after mounting all the virtual hard disks of the virtual machine VMACHINE. From the Application log: VSS - None - Event ID: 12290: Volume Shadow Copy Service warning: GetVolumeInformationW( \\?\Volume{fb84bae7-87f5-11dd-9832-001cc4961ca6}\,NULL,0, NULL,NULL,[0x00000000], , 260) == 0x0000045d. hr = 0x00000000. From the System log: Ntfs - Disk - Event ID: 55: The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:\WINDOWS\Temp\ {fb84bae7-87f5-11dd-9832-001cc49.... My current theory is that VSS creates a mount point for an image file of the VHD, then the software panics for some reason, leaving everything in an inconsistent state. Removing the mount point doesn't resolve the problem. All of the other disks check out fine with CHKDSK. There's no exclusion option for VHDs or to turn off online backups. Has anyone seen this kind of thing before or point me in the right direction for getting more information about the mount point and it's origins? I haven't been able to trace what application is creating that mount point.

  Read the article

• Booting the server redis no errors

  - by Tylër

  The redis but usually begins with the following errors: tyler @ tyler-vortex: ~ / pens $. / src / redis-server [3690] Dec 01 10:56:05 # Warning: the specified config file, using the default config. In order to Specify a config file use 'redis-server / path / to / redis.conf' [3690] Dec 01 10:56:05 # Unable to set the max number of files limit to 10032 (Operation not permitted), setting the max configuration to 992 clients. Others errors founds: tyler@tyler-vortex:~/redis$ sudo ./utils/install_server.sh Welcome to the redis service installer This script will help you easily set up a running redis server Please select the redis port for this instance: [6379] Selecting default: 6379 Please select the redis config file name [/etc/redis/6379.conf] Selected default - /etc/redis/6379.conf Please select the redis log file name [/var/log/redis_6379.log] Selected default - /var/log/redis_6379.log Please select the data directory for this instance [/var/lib/redis/6379] Selected default - /var/lib/redis/6379 Please select the redis executable path [/usr/local/bin/redis-server] cat: ./redis.conf.tpl: Arquivo ou diretório não encontrado cat: ./redis_init_script.tpl: Arquivo ou diretório não encontrado ERROR: Could not write init script to /tmp/6379.conf. Aborting! Furthermore, I would like to know how to configure it not to consume so much RAM. Follow the memory configuration of our website, but the settings of "vm-*" does not exist in the file redis.conf. http://redis.io/topics/virtual-memory You have to create them? * Edit: I installed. After that, I believe that I no longer have access via. / Src / redis-server, because it happens: tyler@tyler-vortex:~$ cd redis/ tyler@tyler-vortex:~/redis$ ./src/redis-server [2616] 01 Dec 22:29:30 # Warning: no config file specified, using the default config. In order to specify a config file use 'redis-server /path/to/redis.conf' [2616] 01 Dec 22:29:30 # Opening port 6379: bind: Address already in use tyler@tyler-vortex:~/redis$ But there's another detail, the redistribution starts with the system .. redis 127.0.0.1:6379> exit tyler@tyler-vortex:~/redis$ ./src/redis-cli redis 127.0.0.1:6379> exit ... but how can I now see that the communication had before you installed from. sh?

  Read the article

• Authentication on Exchange using EWS managed API

  - by Jacob Proffitt

  I'm having a weird issue with the Exchange Web Services. The operation I'm attempting is pretty simple—pull a user's calendar items for the current week on our internal website. When testing locally, the ews managed API pulls the calendar information just fine. When deployed to the web server (using integrated windows authentication), it chokes. My trace is telling me that access is denied in the Exchange call. Initially, I thought this was a double-hop NTLM permissions issue, but it turns out that the service actually works for some internal users, but not for most. The only thing I can find that the functioning users have in common is that they are blackberry users and I surmise that their exchange permissions are setup differently. Or are their active directory accounts setup differently? I don't know and it's driving me crazy. I surmise that the blackberry app runs some scripts when a user is added to the application, but I'm completely unfamiliar with what may be going on behind the scenes there. So. Is there a way to duplicate the permissions those users enjoy (either AD or Exchange permissions)? And/or how exactly does one fix the double-hop credentials situation?

  Read the article

• Unexplained CPU and Disk activity spikes in SQL Server 2005

  - by Philip Goh

  Before I pose my question, please allow me to describe the situation. I have a database server, with a number of tables. Two of the biggest tables contain over 800k rows each. The majority of rows are less than 10k in size, though roughly 1 in 100 rows will be 1 MB but <4 MB. So out of the 1.6 million rows, about 16000 of them will be these large rows. The reason they are this big is because we're storing zip files binary blobs in the database, but I'm digressing. We have a service that runs constantly in the background, trimming 10 rows from each of these 2 tables. In the performance monitor graph above, these are the little bumps (red for CPU, green for disk queue). Once ever minute we get a large spike of CPU activity together with a jump in disk activity, indicated by the red arrow in the screenshot. I've run the SQL Server profiler, and there is nothing that jumps out as a candidate that would explain this spike. My suspicion is that this spike occurs when one of the large rows gets deleted. I've fed the results of the profiler into the tuning wizard, and I get no optimisation recommendations (i.e. I assume this means my database is indexed correctly for my current workload). I'm not overly worried as the server is coping fine in all circumstances, even under peak load. However, I would like to know if there is anything else I can do to find out what is causing this spike? Update: After investigating this some more, the CPU and disk usage spike was down to SQL server's automatic checkpoint. The database uses the simple recovery model, and this truncates the log file at each checkpoint. We can see this demonstrated in the following graph. As described on MSDN, the checkpoints will occur when the transaction log becomes 70% full and we are using the simple recovery model. This has been enlightening and I've definitely learned something!

  Read the article

• New user profile creation error - Windows cannot open *.exe

  - by Jake

  I have a windows 7 laptop with the user "mydomain\boy" that cannot log in to the laptop. the error message is something like "User profile service cannot log in the user boy". I then logged in with the domain admin account "mydomain\admin" and then went to delete the "mydomain\boy" from my computer system properties advance system settings user profiles settings. I also ensure that the user is deleted from control panel user accounts. I then also deleted the user folder c:\users\boy I also checked that the registry at this location HKLM\software\microsoft\windows nt\currentversion\profilelist\ and ensure that there is no entry for boy. I followed http://support.microsoft.com/kb/947215 using the method 3 "fix it for me" but does not seem to do anything. (or i don't know how to use it). AFTER EVERYTHING DONE ABOVE... Everytime i log in with a new user, be it boy, girl or anything other domain account (other than the admin account already created when I first logged in to begin the fix/break), it takes a long time, and when the "preparing desktop" goes away, it starts to exe cannot open error e.g. regsvr.exe etc.. file association problem with exe QUESTION (phew finally..): Please tell me how to fix it? Thanks!

  Read the article

• Postfix mail server: can't connect via POP/IMAP

  - by MelkerOVan

  I've followed this guide on setting up a mail server on my dedicated server. I've been able to send mails from the php application I'm using and the linux commandline (using telnet, php, etc). The problem is that I cannot connect to the server via IMAP/POP which I've setup using Courier. I've tried using thunderbird but it complains that the username or password is wrong. I doubt it is the username/password but I don't know how to trouble shoot this. Edit: Here's the messages in mail.log: Jan 9 22:43:38 mail authdaemond: received auth request, service=imap, authtype=login Jan 9 22:43:38 mail authdaemond: authmysql: trying this module Jan 9 22:43:38 mail authdaemond: SQL query: SELECT id, crypt, "", uid, gid, home, "", "", name, "" FROM users WHERE id = '[email protected]' AND (enabled=1) Jan 9 22:43:38 mail authdaemond: password matches successfully Jan 9 22:43:38 mail authdaemond: authmysql: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: authmysql: clearpasswd=<null>, passwd=6SrBcYq65l8QU Jan 9 22:43:38 mail authdaemond: Authenticated: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/spool/mail/virtual, [email protected], fullname=peter, maildir=<null>, quota=<null>, options=<null> Jan 9 22:43:38 mail authdaemond: Authenticated: clearpasswd=peter, passwd=6SrBcYq65l8QU Jan 9 22:43:38 mail imapd: chdir Maildir: No such file or directory

  Read the article

• Webmin / Virtualmin running php as www-data, is locked out of viewing .htaccess and writing

  - by Kirill

  I've asked this on the virtualmin forums, but haven't had any help from there. Recently, "something" happened and it seems that the apache service has gone a bit weird. What it does: it runs all apache traffic as www-data and sometimes spawns the php5-cgi process as www-data, this is a problem because all the domain users own their directories and default permissions don't let www-data write to these folders (file uploads are dead) or read .htaccess (permalinks are broken in wordpress). I've googled this for about a week straight now, tried pretty much everything I could find and achieved nothing. The only thing that I think might actually be the cause of all this is this page: http:// - i.imgur.com/NYW3x.png (got shut down by the spam filter) So I figured if I set it to "default", this might magically start working again, but all it does is "crash" apache (all websites timeout). I figure it's something to do with the "mpm" module or something, but I can't find anything relevant in the settings to modify for it to work. Can someone please point me in the right direction? System info: Webmin version 1.580 Kernel and CPU Linux 2.6.35.4-rscloud on x86_64 Virtualmin version 3.90.gpl GPL Ubuntu 10.04 LTS (Lucid) A couple screenshots of top http://i.imgur.com/U2DTK.png http://i.imgur.com/sNPKs.png

  Read the article

• Problem removing US keyboard layout from input languages

  - by Nazariy

  I'm working on English (UK) version of Windows 7, my second input language is Russian. Since installation of Windows I have removed US keyboard layout and set LEFT ALT+SHIFT as input switcher. Everything was fine until now. Recently I noticed that my switch combination does not always work. I opened language select bar and found there English (US) keyboard layout. I went to settings and found that in General Tab there is only two languages available, US was not listed. I decided to add US layout manually and remove it after. This operation went as expected, US layout disappeared from language bar. But after few hours it appeared again. I started "googling" and found that I'm not alone. On Microsoft forum I found suggestion to remove US layout as I did before and than copy all settings to all profiles. It's look like some service are adding US layout on it's own, but I have no idea which one. Does any one know how to fix this issue?

  Read the article

• How can I resolve Oracle 11g XE connection failure straight after installation?

  - by d3vid

  I have just installed Oracle 11g XE on a Windows 7 VirtualBox VM, using all the default options. "Getting Started" fails When I click on Getting Started I get taken to http://127.0.0.1:8080/apex/f?p=4950 which fails. After some browsing I came across a suggestion to confirm the HTTP port, but I can't get this far, because I can't connect. connect system fails If I select Run SQL command line I get taken to a SQL prompt. I enter connect system and get prompted for a password. I enter the password. I immediately get the following error: ERROR: ORA-01033: ORACLE initialization or shutdown in progress Process ID: 0 Session ID: 0 Serial number: 0 Info: Start database This happens whether or not I run Start database first. (Start database just opens a Windows command prompt window.) Info: Windows services My Oracle services start as follows: Starting the manual services doesn't resolve the problem. Enabling and starting the disabled service doesn't resolve the problem. Is there something I haven't done? How can I resolve this connection error?

  Read the article

• SSL Certifcate Request s2003 DC CA DNS Name not Avaiable.

  - by Beuy

  I am trying to submit a request for an SSL certificate on a Domain Controller in order to enable LDAP SSL, and having no end of problems. I am following the information provided at http://support.microsoft.com/default.aspx?scid=kb;en-us;321051 & http://adldap.sourceforge.net/wiki/doku.php?id=ldap_over_ssl Steps taken so far: Create Servername.inf with the following information ;----------------- request.inf ----------------- [Version] Signature="$Windows NT$ [NewRequest] Subject = "CN=servername.domain.loc" ; replace with the FQDN of the DC KeySpec = 1 KeyLength = 1024 ; Can be 1024, 2048, 4096, 8192, or 16384. ; Larger key sizes are more secure, but have ; a greater impact on performance. Exportable = TRUE MachineKeySet = TRUE SMIME = False PrivateKeyArchive = FALSE UserProtected = FALSE UseExistingKeySet = FALSE ProviderName = "Microsoft RSA SChannel Cryptographic Provider" ProviderType = 12 RequestType = PKCS10 KeyUsage = 0xa0 [EnhancedKeyUsageExtension] OID=1.3.6.1.5.5.7.3.1 ; this is for Server Authentication ;----------------------------------------------- Create Certificate request by running: certreq -new Servername.inf Servername.req Attempt to submit Certificate request to CA by running: certreq -submit -attrib "CertificateTemplate: DomainController" request.req At which point I get the following error: The DNS name is unavailable and cannot be added to the Subject Alternate Name. 0x8009480f (-2146875377) Trouble shooting steps I have taken so far 1. Modify the Domain Controller Template to supply Subject Name in Request restart Certificate Service, include SAN in Request, same error. 2. Re-installed Certificate Services / IIS / Restarted machine countless times Any help resolving the issue would be greatly appreciated.

  Read the article

• Reverse proxy for mailserver (SMTP + HTTP for web client)

  - by gaqzi

  I'm looking at doing some reverse proxy work for a mail server with corresponding web client. Both servers are running on the same machine, this is not a server with a high load. :) The solution I've discussed with friends is having the mail server/web client on our internal network. Then to put a reverse proxy on the DMZ to service both SMTP and web client HTTP-traffic to the mail server on the internal network. From what I understand this is the recommended secure solution? So far I've thought for the SMTP-proxy part of using postfix which will receive mail, do some spamhause and similar anti-spam measures and if it all checks out, send the mail to the mail server on the inside. The mail server on the inside will send all outgoing mail to the proxy which will then send it out on the Internet. For the web client I'm not sure exactly which software I should be running on the proxy machine, I've been thinking about using Squid -- but that's basically based on the fact that I know squid is a http proxy. The web client data will be sent out over SSL. Reading around some here on Serverfault I've seen other people using Apache with mod_proxy+mod_security for similar situations. Am I thinking correctly for this solution? What software would you guys use and with which modules? Thanks in advance for the help! :)

  Read the article

• How do I identify and fix the cause of transaction log growth on SIMPLE recovery model databases?

  - by Stuart B

  I recently upgraded our SQL Server 2008 installations to service pack 2. One of our databases is on the simple recovery model, but its transaction log is growing extremely fast. The path I'm currently investigating is that we have a transaction somewhere out there stuck in active state. Here is why: select name, recovery_model_desc, log_reuse_wait_desc from sys.databases where name in ('SimpleDB') name recovery_model_desc log_reuse_wait_desc SimpleDB SIMPLE ACTIVE_TRANSACTION When I check my active transactions, I get the following. Note that I installed SP2 and restarted our server on 12/25 at around noonish. select transaction_id, name, transaction_begin_time, transaction_type from sys.dm_tran_active_transactions transaction_id name transaction_begin_time transaction_type 233 worktable 2010-12-25 12:44:29.283 2 236 worktable 2010-12-25 12:44:29.283 2 238 worktable 2010-12-25 12:44:29.283 2 240 worktable 2010-12-25 12:44:29.283 2 243 worktable 2010-12-25 12:44:29.283 2 245 worktable 2010-12-25 12:44:29.283 2 62210 tran_sp_MScreate_peer_tables 2010-12-25 12:45:00.880 1 55422856 user_transaction 2010-12-28 16:41:56.703 1 55422889 SELECT 2010-12-28 16:41:57.303 2 470 LobStorageProviderSession 2010-12-25 12:44:30.510 2 Note that according to the documentation a transaction_type of 1 means read/write, and 2 means read-only. So, my line of thinking is that the trans_sp_MScreate_peer_tables transaction is stuck for some reason and holding up transaction log truncation. Is this a plausible scenario? Correct me if my line of thinking is off, as I'm not a SQL Server expert. If this is correct, how do I erase that transaction so that my transaction log is truncated as usual?

  Read the article

• Static IP for dynamic IP

  - by scape279

  I have a dynamic IP address. I would like to have a static IP, but Virgin Media don't allow static IPs for residential broadband services, even if you ask them really nicely and offer to pay for it without switching to a business tariff. I am already registered with a dynamic DNS service which is updated by my router eg me.example.com will always resolve to my dynamic IP. This is fine for some circumstances, but not if you can only enter an IP address into configuration files/hardware etc like firewalls, subversion services etc etc. Is there a way I can have a static IP address 'forwarding' to my dynamic IP? Would a possible solution involve tunnelling? Setting up a private proxy? Please note the following: I am able to buy an IP address from my web host. I have access to a webserver and I am able to create custom DNS zones. I'm happy to have a webserver running at home if necessary also. I do not wish to change broadband providers. I have zero control over the services that require the IP address entering so I cannot tackle the problem that way round (services I need to access are at work). PS I've tried googling this issue, but it is very difficult to search for as most results are related to dynamic dns (which I already have set up and isnt quite what I'm after)

  Read the article

• Modify registry for Internet Connection Sharing?

  - by Tim

  My OS is Windows XP. Quoted from How to Change the IP Range for the Internet Connection Sharing DHCP service Use Registry Editor to modify the data value of the IntranetInfo value in the following registry key: Hkey_Local_Machine\System\CurrentControlSet\Services\ICSharing\Settings\General The first number listed is the IP address of the internal IP address of the Connection Sharing host. The second number is the subnet IP address separated by a comma. Enter the first IP address of the new range followed by the subnet mask, separated by a comma. (For example, 169.254.0.1,255.255.0.0.). Modify the data value of the Start value in the following registry key: Hkey_Local_Machine\System\CurrentControlSet\Services\ICSharing\Addressing\Settings Change the value to the second address of the selected IP range. This address cannot be the same or a lower value than the IP address used for the IntranetInfo key. Modify the data value for the Stop value in the same registry key. Enter the last the IP address of the selected IP range. My registry table does not have Hkey_Local_Machine\System\CurrentControlSet\Services\ICSharing, and I don't know how to do with my registry table following the above three steps. Can someone guide me through it step by step?

  Read the article

• Could not continue scan with NOLOCK due to data movement during installation

  - by dbdev1

  Hi, I am running Windows Server 2008 Standard Edition R2 x64 and I installed SQL Server 2008 Developer Edition. All of the preliminary checks run fine (Apart from a warning about Windows Firewall and opening ports which is unrelated to this and shouldn't be an issue - I can open those ports). Half way through the actual installation, I get a popup with this error: Could not continue scan with NOLOCK due to data movement. The installation still runs to completion when I press ok. However, at the end, it states that the following services "failed": database engine services sql server replication full-text search reporting services How do I know if this actually means that anything from my installation (which is on a clean Windows Server setup - nothing else on there, no previous SQL Servers, no upgrades, etc) is missing? I know from my programming experience that locks are for concurrency control and the Microsoft help on this issue points to changing my query's lock/transactions in a certain way to fix the issue. But I am not touching any queries? Also, now that I have installed the app, when I login, I keep getting this message: TITLE: Connect to Server Cannot connect to MSSQLSERVER. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 67) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=67&LinkId=20476 BUTTONS: OK I went into the Configuration Manager and enabled named pipes and restarted the service (this is something I have done before as this message is common and not serious). I have disabled Windows Firewall temporarily. I have checked the instance name against the error logs. Please advise on both of these errors. I think these two errors are related. Thanks

  Read the article

• windows 8.1 upgrade fails with error code 0xc1900101-0x20017

  - by cmorse

  I just tried to install windows 8.1 on my laptop, but it fails to install with the message: Sorry we couldn't complete the update to Windows 8.1. We restored your previous version of Windows to this PC 0xC1900101 - 0x20017 It looks like on the first boot that the laptop is going to the PC restore screen (it asks what kind of keyboard I have, and then what repair optins I would like to take). Thus far I have just been selecting "Continue to windows 8." I'm running a Lenovo x220i tablet. I've got 43GB of free disk space. It installed just fine on my desktop. The primary difference between the two machines is that the desktop has media center install, and isn't using TrueCrypt. Full WindowsUpdate.log http://pastebin.com/hGmAW4Q1 Most important portion of WindowsUpdate.log: 2013-10-17 10:41:06:671 964 694 Agent ************* 2013-10-17 10:41:06:671 964 694 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2013-10-17 10:41:06:671 964 694 Agent ********* 2013-10-17 10:41:06:671 964 694 Agent * Online = No; Ignore download priority = No 2013-10-17 10:41:06:671 964 694 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2013-10-17 10:41:06:671 964 694 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service 2013-10-17 10:41:06:671 964 694 Agent * Search Scope = {Machine & All Users} 2013-10-17 10:41:06:671 964 694 Agent * Caller SID for Applicability: S-1-5-18 2013-10-17 10:41:07:233 964 870 Report REPORT EVENT: {AD47FBDC-F7F9-4E7F-BAF4-DBA3784C7101} 2013-10-17 10:41:06:436-0600 1 202 [AU_REBOOT_COMPLETED] 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed. 2013-10-17 10:41:07:233 964 870 Report REPORT EVENT: {8D4E7A67-9526-4702-A897-5BE5F97497AF} 2013-10-17 10:41:06:639-0600 1 204 [AGENT_INSTALLING_FAILED_POST_REBOOT] 101 {8951E70D-4332-4F7C-B92D-D9362E384959} 1 c1900101 WSAcquisition Failure Content Install Installation Failure Post Reboot. 2013-10-17 10:41:07:249 964 870 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8 2013-10-17 10:41:07:249 964 870 Report WER Report sent: 7.8.9200.16715 0xc1900101(0x20017) 8951E70D-4332-4F7C-B92D-D9362E384959 Install 101 Unmanaged 2013-10-17 10:41:07:249 964 870 Report CWERReporter finishing event handling. (00000000)

  Read the article

• File transfer problems through VPN when Cisco IPS is enabled

  - by Richard West

  We have a Cisco ASA 5510 firewall with the IPS module installed. We have a customer that we must connect to via VPN to their network to exchange files via FTP. We use the Cisco VPN client (version 5.0.01.0600) on our local workstations, which are behind the firewall and subject to the IPS. The VPN client is successful in connecting to the remote site. However when we start the FTP file transfer we are able to upload only 150K to 200K of data, then everything stops. A minute later the VPN session is dropped. I think I have isolated this to an IPS issue by temporarily disabling the Service Policy on the ASA for the IPS with the following command: access-list IPS line 1 extended permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 inactive After this command was issued I then established the VPN to the remote site and was successful in transferring the entire file. While still connected to the VPN and FTP session I issued the command to enable the IPS: access-list IPS line 1 extended permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 The file transfer was tried again and was once again successful so I closed the FTP session and reopened it, while keeping the same VPN session open. This file transfer was also successful. This told me that nothing with the FTP programs was being filtered or causing the problem. Furthermore, we use FTP to exchange files with many sites everyday without issue. I then disconnected the original VPN session, which was established when the access-list was inactive, and reconnected the VPN session, now with the access-list active. After starting the FTP transfer the file stopped after 150K. To me this seems like the IPS is blocking, or somehow interfering with the initial VPN setup to the remote site. This only started happening last week after the latest IPS signature updates were applied (sig version 407.0). Our previous sig version was 95 days old becuase the system was not auto updating itself. Any ideas on what could be causing this problem?

  Read the article

• Redmine subversion won't ignore certificate error even if told

  - by Pekka

  I have set up a copy of Redmine through the Bitnami Redmine Stack and am having trouble accessing a remote SVN repository through https. The trouble seems to be related to the fact that I don't have a signed certificate, and the certificate provided doesn't match the host name (I am accessing the same server through a number of host names). I am new to Ruby, Mongrel, Rails and Redmine. Following the advice in this forum thread, I changed the path Redmine uses to invoke the svn client in \apps\redmine\lib\ redmine\scm\adapters\subversion_adapter.rb from SVN_BIN = "svn" to SVN_BIN = "svn --trust-server-cert --non-interactive --config-dir c:/user/temp" I was hoping that the --trust-server-cert option would fix the certificate problem. However, I am still getting the following error message in mongrel.log: svn: OPTIONS of 'https://server.xyz:8443/svn/reponame': Server certificate verification failed: certificate issued for a different hostname, issuer is not trusted (https://server.xyz:8443) Does anybody know what to do about this? Additional info: I re-started the mongrel service after each change I am sure the configuration change has taken effect because subversion has created a full configuration directory in c:\user\temp I can access the remote repository using command line svn no problem The remote repository runs on a Windows box with VisualSVN

  Read the article

• What is Apache Synapse?

  - by Aren B

  My website keeps getting hit by odd requests with the following user-agent string: Mozilla/4.0 (compatible; Synapse) Using our friendly tool Google I was able to determine this is the hallmark calling-card of our friendly neighborhood Apache Synapse. A 'Lightweight ESB (Enterprise Service Bus)'. Now, based on this information I was able to gather, I still have no clue what this tool is used for. All I can tell is that is has something to do with Web-Services, and supports a variety of protocols. The Info page only leads me to conclude it has something to do with proxies, and web-services. The problem I've run into is that while normally I wouldn't care, we're getting hit quite a bit by Russian IPs (not that russian's are bad, but our site is pretty regionally specific), and when they do they're shoving wierd (not xss/malicious at least not yet) values into our query string parameters. Things like &PageNum=-1 or &Brand=25/5/2010 9:04:52 PM. Before I go ahead and block these ips/useragent from our site, I'd like some help understanding just what is going on. Any help would be greatly appreciated :)

  Read the article

• Setting up SQL Server 2005 to use all available memory in 32bit Windows Server 2003 - and verifying

  - by Rizwan Kassim

  There are a number of questions along this line - but they either sometimes contradict each other, or don't show how to properly verify that everything is actually working - hopefully this can be comprehensive... I'm running SQL Server 2005 SP3 Standard on Windows Server 2003 R2 Standard. My server has 8GB of memory installed - my system is almost entirely used as a Database Server - there are some services running on them, but the OS + services can run within 1Gb of RAM. What I've done (please tell me if I'm doing something wrong): /3GB in the boot.ini. (To increase the amount of user-space memory available - info) /PAE in the boot.ini. (Windows claimed to be doing PAE even without this switch, somethow.) Enabled AWE in SQL Server. Enabled Lock Pages in Memory Option for users SYSTEM and Local Service. (info). SQL Server Standard doesn't seem to use this until Cumulative Update 4, which isn't installed on my server. (info) Set Min/Max Memory to : 1024Mb/5112Mb After doing all the above, we definately saw a level of improvement - but I'd like now to verify my settings, make sure that I'm making full use of the memory available. (There appeared to be a slowdown when max = 7Gb, so I edged off from that value, but it might have been just perceptual.) To verify, I checked the following levels in PerfMon : Process(sqlserv):Working Set : 76386304 SQL Server(Memory Manager) : Total Server Memory : 3538944 (I saw a doc that noted that this wasn't the full memory used by SQL Server, so I'm not sure whether to trust it) So -- my questions... Should my max be around 7Gb? If not, what should it be? Why is total server memory at 3.5G, when it's been allocated 5G? What is the proper metric for the amount of memory allocated to SQL Server? The Working Set seems a bit large... Am I possibly missing any steps in the setup? Any recommended resources on starting to tune the caching system now? Thanks

  Read the article

• Issue configuring Oracle database for SSL

  - by Santhosha Kaldambe

  Hello, I want to setup Oracle for SSL communication. I am not using SSL authentication for database user. As first requirement, generated self signed certificate using OpenSSL and added certificate to wallet. The wallet location is specified in server configuration. Created listener and it is starting however it does not provide any service. The default listener (non SSL) is working fine. When I execute LSNRCTL.EXE status SSLLISTENER it gives below output. STATUS of the LISTENER Alias SSLLISTENER Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production Start Date 14-NOV-2009 01:47:08 Uptime 16 days 22 hr. 14 min. 3 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File C:\app\Administrator\product\11.1.0\db_1\network\admin\listener.ora Listener Log File c:\app\administrator\diag\tnslsnr\\ssllistener\alert\log.xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=)(PORT =2484))) The listener supports no services The command completed successfully Here is exact content of various files after configuration. 1) File Name: tnsnames.ora ORCL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT 1521)) ) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) 2) File Name: sqlnet.ora SSL_VERSION = 0 NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT) sqlnet.authentication_services= (NONE) tcp.validnode_checking = no tcp.invited_nodes=(PS0803.oraebs.com,PS2948,PS5098) SSL_CLIENT_AUTHENTICATION = FALSE WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\app\Administrator\admin\orcl\Server_Wallet) ) ) 3) File Name: listener.ora SSL_CLIENT_AUTHENTICATION = FALSE WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\app\Administrator\admin\orcl\Server_Wallet) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT 1521)) ) ) SSLLISTENER = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCPS)(HOST = )(PORT = 2484)) ) Thanks Santhosh

  Read the article

• SNMPD running but not listening for connections at random

  - by Lukasz

  OS: CentOS release 5.7 (Final) Net-SNMP: net-snmp-5.3.2.2-14.el5_7.1 (from RPM) Periodically my NMS notifies me that SNMP has gone down on this machine. The service is restored in between 10 to 30 minutes. My NMS also pings and check SSH and those services are not affected during the SNMP outage. SNMPD log file shows that it is working and apparently receiving packets (either from local agents from 127.0.0.1 or from my NMS at 172.16.37.37) however attempting to snmpwalk locally or from the NMS system fails with a timeout. I have 7 of these servers running mixture of CentOS 5.7 and RHEL 5.7 with this specific version of Net-SNMP installed from RPM - none of them have this issue except this one. 5 of the machines (including the NMS system and this problem server) are in the same rack connected using one switch. Restarting SNMPD does not fix the issue - it clears up by itself eventually. Any suggestions where I can begin diagnosing the issue? It's a closed subnet so IPTables is not used. SNMPD config below: # Following entries were added by HP Insight Management Agents at # Tue May 15 10:58:17 CLT 2012 dlmod cmaX /usr/lib64/libcmaX64.so rwcommunity public 127.0.0.1 rocommunity public 127.0.0.1 rwcommunity 3adRabRu 172.16.37.37 rocommunity 3adRabRu 172.16.37.37 rwcommunity 3adRabRu 172.16.37.36 rocommunity 3adRabRu 172.16.37.36 trapcommunity callmetraps trapsink 172.16.37.37 callmetraps trapsink 172.16.37.36 callmetraps syscontact Lukasz Piwowarek syslocation Santiago, Chile # ---------------------- END -------------------- agentAddress udp:161 com2sec rwlocal default public com2sec rolocal default public com2sec subnet default 3adRabRu group rwv2c v2c rwlocal group rov2c v2c rolocal group rov2c v2c subnet view all included .1 access rwv2c "" any noauth exact all all none access rov2c "" any noauth exact all none none

  Read the article

< Previous Page | 668 669 670 671 672 673 674 675 676 677 678 679  | Next Page >