internet explorer 8 - Page 674

How To Skip Commercials in Windows 7 Media Center

- by DigitalGeekery

If you use Windows 7 Media Center to record live TV, you’re probably interested in skipping through commercials. After all, a big reason to record programs is to avoid commercials, right? Today we focus on a fairly simple and free way to get you skipping commercials in no time. In Windows 7, the .wtv file format has replaced the dvr-ms file format used in previous versions of Media Center for Recorded TV. The .wtv file format, however, does not work very well with commercial skipping applications. The Process Our first step will be to convert the recorded .wtv files to the previously used dvr-ms file format. This conversion will be done automatically by WtvWatcher. It’s important to note that this process deletes the original .wtv file after successfully converting to .dvr-ms. Next, we will use DVRMSToolBox with the DTB Addin to handle commercials skipping. This process does not “cut” or remove the commercials from the file. It merely skips the commercials during playback. WtvWatcher Download and install the WTVWatcher (link below). To install WtvWatcher, you’ll need to have Windows Installer 3.1 and .NET Framework 3.5 SP1. If you get the Publisher cannot be verified warning you can go ahead and click Install. We’ve completely tested this app and it contains no malware and runs successfully. After installing, the WtvWatcher will pop up in the lower right corner of your screen. You will need to set the path to your Recorded TV directory. Click on the button for “Click here to set your recorded TV path…” The WtvWatcher Preferences window will open… …and you’ll be prompted to browse for your Recorded TV folder. If you did not change the default location at setup, it will be found at C:\Users\Public\Recorded TV. Click “OK” when finished. Click the “X” to close the Preferences screen. You should now see WtvWatcher begin to convert any existing WTV files. The process should only take a few minutes per file. Note: If WtvWatcher detects an error during the conversion process, it will not delete the original WTV file. You will probably want to run WtvWatcher on startup. This will allow WtvWatcher too constantly scan for new .wtv files to convert. There is no setting in the application to run on startup, so you’ll need to copy the WTV icon from your desktop into your Windows start menu “Startup” directory. To do so, click on Start > All Programs, right-click on Startup and click on Open all users. Drag and drop, or cut and paste, the WtvWatcher desktop shortcut into the Startup folder. DVRMSToolBox and DTBAddIn Next, we need to download and install the DVRMSToolBox and the DTBAddIn. These two pieces of software will do the actual commercial skipping. After downloading the DVRMSToolBox zip file, extract it and double-click the setup.exe file. Click “Next” to begin the installation. Unless DVRMSToolBox will only be used by Administrator accounts, check the “Modify File Permissions” box. Click “Next.” When you get to the Optional Components window, uncheck Download/Install ShowAnalyzer. We will not be using that application. When the installation is complete, click “Close.” Next we need to install the DTBAddin. Unzip the download folder and run the appropriate .msi file for your system. It is available in 32 & 64 bit versions. Just double click on the file and take the default options. Click “Finish” when the install is completed. You will then be prompted to restart your computer. After your computer has restarted, open DVRMSToolBox settings by going to Start > All Programs, DVRMSToolBox, and click on DVRMStoMPEGSettings. On the MC Addin tab, make sure that Skip Commercials is checked. It should be by default. On the Commercial Skip tab, make sure the Auto Skip option is selected. Click “Save.” If you try to watch recorded TV before the file conversion and commercial indexing process is complete you’ll get the following message pop up in Media Center. If you click Yes, it will start indexing the commercials if WtvWatcher has already converted it to dvr-ms. Now you’re ready to kick back and watch your recorded tv without having to wait through those long commercial breaks. Conclusion The DVRMSToolBox is a powerful and complex application with a multitude of features and utilities. We’ve showed you a quick and easy way to get your Windows Media Center setup to skip commercials. This setup, like virtually all commercial skipping setups, is not perfect. You will occasionally find a commercial that doesn’t get skipped. Need help getting your Windows 7 PC configured for TV? Check out our previous tutorial on setting up live TV in Windows Media Center. Links Download WTV Watcher Download DVRMSToolBox Download DTBAddin Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Increase Skip and Replay Intervals in Windows 7 Media CenterSchedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Add Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

Read the article

Convert a DVD Movie Directly to AVI with FairUse Wizard 2.9

- by DigitalGeekery

Are you looking for a way to backup your DVD movie collection to AVI? Today we’ll show you how to rip a DVD movie directly to AVI with FairUse Wizard. About FairUse Wizard FairUse Wizard 2.9 uses the DivX, Xvid, or h.264 codec to convert DVD to an AVI file. It comes in both a free version and commercial version. The free, or “Light” version, can create files up 700MB while the commercial version can output a 1400MB file. This will allow you to back up your movies to CD, or even multiple movies on a single DVD. FairUse Wizard states that it does not work on copy protected discs, but we’ve seen it work on all but some of the most recent copy protection. For this tutorial we’re using the free Light Edition to convert a DVD to AVI. They also offer a commercial version that you can get for $29.99 and it offers even more encoding possibilities for converting video to you portable digital devices. Installation and Configuration Download and install FairUse Wizard. (Download link below). Once the install is complete, open FairUse Wizard by going to Start > All Programs > FairUse Wizard 2 > FairUse Wizard 2. FairUse Wizard will open on the new project screen. Select “Create a new project” and type a project name into the text box. This will be used as the file output name. Ex: A project name of Simpsons Movie will give you an output file of Simpsons Movie.avi. Next, browse for a destination folder for the output file and temp files. Note that you will need a minimum of 6 GB of free disk space for the conversion process. Note: Much of that 6 GB will be used for temporary files that we will delete after the conversion process. Click on the Options button at the bottom. Under Preferences, choose your preferred video codec and file output size. XviD and x264 are installed by default. If you prefer to use DivX, you will have to install it separately. Also note the “Two pass” option. Checking the “Two pass” box will encode your video twice for higher quality, but will take more time. Un-checking the box will speed up the conversion process. Under Audio track, note that English subtitles are enabled by default, so to remove the subtitles, you will need to change the dropdown list so it shows only a dash (-). You can also select “Use TV Mode” if your primary playback will be on a 4:3 TV screen. Click “Next.” Full Auto Mode vs. Manual Mode You should now be back to the initial screen. Next, we’ll need to determine whether or not we can use “Full Auto Mode” to convert the movie. The difference is that “Full Auto Mode” will automatically perform a few steps that you will otherwise have to do manually. If you choose the “Full Auto Mode” option, FairUse Wizard will look for the video on the DVD with the longest duration and assume it is the chain that it should convert to AVI. It’s possible, however, your disc may contain a few chains of similar size, such as a theatrical cut and director’s cut, and the longest chain may not be the one you wish to convert. Make sure that “Full auto mode” is not checked yet, and click “Next.” FairUse Wizard will parse the IFO files and display all video chains longer than 60 seconds. In most cases, you will only find that the largest chain is the one closely matching the duration of the movie. In these instances, you can use “Full Auto Mode.” If you find more than one chain that are close in duration to the length of the movie, consult the literature on the DVD case, or search online, to find the actual running time of the movie. If the proper file chain is not the longest chain, you won’t be able to use “Full Auto Mode.” Full Auto Mode To use “Full Auto Mode,” simply click the “Back” button to return to the initial screen Now, place a check in the “Full auto mode” check box. Click “Next.” You will then be prompted to chose your DVD drive, then click “OK.” FairUse Wizard will parse the IFO files… … and then prompt you to Select your drive that contains the DVD one more time before beginning the conversion process. Click “OK.” Manual Mode If you cannot (or don’t wish to) use Full Auto Mode, choose the appropriate video chain and click “Next.” FairUse Wizard will first go through the process of indexing the video. Note: If you get a runtime error during this portion of the process, it likely means that FairUse Wizard cannot handle the copy protection, and thus cannot convert the DVD. FairUse Wizard will automatically detect a cropping region. If necessary, you can edit the cropping region by adjusting the cropping region settings to the left. Click “Next.” Next, click “Auto Detect” to choose the proper field combination. Click “OK” on the pop up window that displays your Field Mode. Then click “Next.” This next screen is mainly comprised of settings from the Options screen. You can make changes at this point such as codec or output size. Click “Next” when ready. Video Conversion Now the video conversion process will begin. This may take a few hours depending on your system’s hardware. Note: There is a check box to “Shutdown computer when done” if you choose to run the conversion overnight or before leaving for work. The first phase will be video encoding… Then the audio… If you chose the “Two Pass” option, your video video will be encoded again on 2nd pass. Then you’re finished. Unfortunately, FairUse Wizard doesn’t clean up after itself very well. After the process is complete, you’ll want to browse to your output directory and delete all the temporary files as they take up a considerable amount of hard drive space. Now you’re ready to enjoy your movie. Conclusion FairUse Wizard is a nice way to backup your DVD movies to good quality .avi files. You can store them on your hard drive, watch them on a media PC, or burn them to disc. Many DVD players even allow for playback of DivX or XviD encoded video from a CD or DVD. For those of you with children, you can burn that AVI file to CD for your kids, and keep your original DVDs stored safely out of harms way. Download Download FairUse Wizard 2.9 LE Similar Articles Productive Geek Tips Kantaris is a Unique Media Player Based on VLCHow to Make/Edit a movie with Windows Movie Maker in Windows VistaAutomatically Mount and View ISO files in Windows 7 Media CenterTune Your ClearType Font Settings in Windows VistaAdd Images and Metadata to Windows 7 Media Center Movie Library TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

Read the article

You Might Be a DBA

- by BuckWoody

With all apologies to Jeff Foxworthy, I was up late Friday night on a holiday weekend (which translated into T-SQL becomes “Maintenance Window”) and I got bored in between the two or three minutes I had between clicks. So I started a “Twitter” meme – and it just took off. I haven’t cleaned these up much, but here, in author order as of Saturday the 29th of May is the list “You might be a DBA” from around the Twitterverse: buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA buckwoody You have at least one set of scripts you won't share #youmightbeaDBA buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA buckwoody You have children older than the rest of your team #youmightbeaDBA buckwoody You and the Oracle DBA would kill each other, but you'll happily fight off a developer together first #youmightbeaDBA buckwoody You've threatened to quit if they give anyone the sa password on production #youmightbeaDBA buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA buckwoody You have at least one set of scripts you won't share #youmightbeaDBA buckwoody You refer to co-workers as "carbon-units" #youmightbeaDBA buckwoody Being paranoid is on your resume at the top #youmightbeaDBA buckwoody Everyone comes to your cube to find the MSDN DVD's #youmightbeaDBA buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA buckwoody You've worn down developers to get your way by explaining normalization levels #youmightbeaDBA buckwoody You refer to clothes as "Data Abstractions" #youmightbeaDBA buckwoody Users pester you to be able to put data in a database, then they pester you to take it out and put it in Excel #youmightbeaDBA buckwoody Others try to de-duplicate data, you try to copy it to more than three locations #youmightbeaDBA buckwoody You have at least one DLT tape in the trunk of your car #youmightbeaDBA buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA buckwoody Your spouse knows what "ETL" means #youmightbeaDBA buckwoody You've referred to yourself as the "Data Janitor" #youmightbeaDBA buckwoody You don't have positive connotations of the word "upgrade" #youmightbeaDBA buckwoody You get your coffee before you check your servers, because you know you won't get any if you don't #youmightbeaDBA buckwoody You always come to work through the back door so no one hijacks you on the way to your cube #youmightbeaDBA buckwoody You check your server logs before you check your e-mail in the morning so you can reply "Yeah, I already fixed that." #youmightbeaDBA buckwoody You have more conference badges than clean socks #youmightbeaDBA buckwoody Your coffee mug says "It depends" #youmightbeaDBA buckwoody You can convince a boss that you need 16GB of RAM in your laptop #youmightbeaDBA buckwoody You've used ebay to find production equipment #youmightbeaDBA buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA buckwoody You know when your company is acquiring another even before the CFO #youmightbeaDBA buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA buckwoody You call aspirin "work vitamins" #youmightbeaDBA buckwoody You get the same amount of sleep even after you have a child #youmightbeaDBA buckwoody You obsess about performance metrics from over one year ago #youmightbeaDBA buckwoody The first thing you buy after the database software is aftermarket tools to manage the database software #youmightbeaDBA buckwoody You've tried to convince someone else to become a DBA #youmightbeaDBA buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA buckwoody You only know other DBA's by their Tweet Handle #youmightbeaDBA buckwoody You've explained the difference between 32 and 64-bit to more than one manager in terms they can understand, using puppets #youmightbeaDBA buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA buckwoody You've driven to the Datacenter to install SQL Server because "you don't trust those NOC admins" #youmightbeaDBA buckwoody You pay more for faster Internet connections than cable at home so you don't have to drive in #youmightbeaDBA buckwoody You call texting a "queuing system" #youmightbeaDBA buckwoody You know that if someone can read Perl, they manage an Oracle system #youmightbeaDBA buckwoody You have an e-mail rule for backup notifications #youmightbeaDBA buckwoody Your food pyramid includes coffee, salt and fat #youmightbeaDBA buckwoody You wish everything had a graphical query plan #youmightbeaDBA buckwoody You refactor your e-mails #youmightbeaDBA buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA buckwoody You've written blog posts on technology you've never actually implemented in production #youmightbeaDBA buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA buckwoody @MidnightDBA Click the #youmightbeaDBA tag. I've had WAY too much coffee today. buckwoody There is no other position that is 1-deep except you and the CEO #youmightbeaDBA buckwoody When you watch "The Office" you call it "OJT" #youmightbeaDBA buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA buckwoody Your blog would make a "best practices" or "worst practices" book #youmightbeaDBA buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA buckwoody The first thing you install on your netbook is SSMS #youmightbeaDBA buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA buckwoody Your watch is set to UTC because it's just easier #youmightbeaDBA buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA buckwoody * == bad #youmightbeaDBA buckwoody * == bad #youmightbeaDBA buckwoody There are just as many females in your technical field as males #youmightbeaDBA buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA buckwoody You refer to time as a "Clustered Index" #youmightbeaDBA buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA buckwoody You think a millisecond is a really long time #youmightbeaDBA buckwoody You're sitting and typing #youmightbeaDBA when you could be outside #youmightbeaDBA buckwoody You can't wait for a technical conference so you can wear a kilt - and you're not Scottish #youmightbeaDBA buckwoody You know that "DBA" stands for "Default Blame Acceptor" #youmightbeaDBA buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA buckwoody You know what "the truth, thole truth and nothing but the truth, so help me Codd" means #youmightbeaDBA buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA buckwoody You can't talk fast enough to get a concept out of your head so you tweet it instead #youmightbeaDBA buckwoody You cry when someone doesn't use a WHERE clause #youmightbeaDBA buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA buckwoody You think "Set theory" is not an verb but a noun #youmightbeaDBA buckwoody You try to convince random strangers to vote on your Connect item #youmightbeaDBA buckwoody You think 3 hours of contiguous sleep is a good thing #youmightbeaDBA or #youmightbeamother buckwoody You don't like Oracle, and not just because of what she did to Neo #youmightbeaDBA buckwoody You know when to say "sequel" and "s-q-l" #youmightbeaDBA buckwoody You know where the data is #youmightbeaDBA buckwoody You refer to your children as "Fully Redundant Mirrors" #youmightbeaDBA buckwoody Holiday == "Maintenance Window" #youmightbeaDBA buckwoody Your laptop is more powerful than the servers in most companies - including your own #youmightbeaDBA buckwoody You capitalize SELECTed words #youmightbeaDBA buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA buckwoody You cringe in public when the word "upgrade" is used in a sentence #youmightbeaDBA buckwoody Holiday == "Maintenance Window" #youmightbeaDBA buckwoody All Data Is MetaData means something to you #youmightbeaDBA buckwoody You've never seen the driveway to your house in the daylight #youmightbeaDBA buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA buckwoody Most of your bloodstream is composed of caffeine #youmightbeaDBA buckwoody Your task list is labeled "CRUD Matrix" #youmightbeaDBA buckwoody You call your wife/husband a "Linked Server" #youmightbeaDBA anonythemouse When someone tells you they are going to take a dump and you wonder of which database then #youmightbeaDBA anonythemouse When it's 11pm on a holiday weekend and you are working #youmightbeaDBA anonythemouse When you sit down at a table and look for it's primary key #youmightbeaDBA anonythemouse When getting milk from the fridge you check the expiry date is > getdate() #youmightbeaDBA blakmk when you wake up dreaming about sql #youmightbeaDBA CharlesGarver You think a @buckwoody bobblehead would be a cool thing to have on the dashboard of your car #youmightbeaDBA CharlesGarver Your friends don't understand why you think there's a difference between single and double quotes #youmightbeaDBA CharlesGarver Even the newest employees know your name from all the downtime notices you've sent out #youmightbeaDBA CharlesGarver You sometimes feel anxious and think "I should test restoring those backups" and then the feeling passes #youmightbeadba CharlesGarver You know what a co-worker means when they ask "how is your squirrel server?" #youmightbeadba CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA CharlesGarver You're willing to move someone's job up in priority for a box of #voodoodonuts #youmightbeaDBA CharlesGarver Each person in your company seems to think you work for THEM #youmightbeaDBA CharlesGarver You have a Love/Hate relationship going on with #Microsoft #youmightbeaDBA CharlesGarver People ask you to troubleshoot their Access program #youmightbeaDBA CharlesGarver The first words you hear in the morning are 'your voicemail box is full' #youmightbeaDBA CharlesGarver The thought of disrupting 500 people's work so you can do something doesn't phase you #youmightbeaDBA CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA CharlesGarver Your home computer is backed up in 3 different places #youmightbeaDBA CharlesGarver Your wardrobe for work includes pajamas #youmightbeaDBA CharlesGarver Someone tells you to look in the INDEX and you look puzzled before finally going to the back of the book. #youmightbeaDBA chuckboycejr If you have ever set up a SQLAgent job to email your mobile phone to serve as an alarm clock #youmightbeaDBA chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA chuckboycejr If you'd wrestle a SysAdmin to the ground to implement #DPA best practices as per @aspiringgeek #youmightbeaDBA databaseguy I need to be up in 7 hours, so I'm off to bed! I'll have to read the rest of @buckwoody's #youmightbeaDBA posts in the AM. (g'night Buck!) databaseguy When people ask you about your house, the first thing you describe is the network. #youmightbeaDBA databaseguy The last thing you say at the office each day is, "is anybody else here? I'm shutting off the lights!" #youmightbeaDBA databaseguy Your blood pressure rises when you read application specs drafted by marketing. #youmightbeaDBA databaseguy A good day at work is one when nobody pays you no mind. #youmightbeaDBA databaseguy You care about latches and wait states. #youmightbeaDBA databaseguy You have worked over 200 hours on a performance tuning project that required no application changes at all. #youmightbeaDBA databaseguy The late-night security guard knows the names of your spouse and kids. #youmightbeaDBA databaseguy You have had vigorous debates about whether it should be pronounced "sequel" or "ess-queue-ell". #youmightbeaDBA databaseguy You have VPN and RDP software installed on your phone ... just in case. #youmightbeaDBA databaseguy You have edited a data file by hand, just to see what would happen. #youmightbeaDBA databaseguy You decorate your office walls with database catalog posters. #youmightbeaDBA databaseguy You've built programs that access data just to keep other developers from asking you to run queries all the time. #youmightbeaDBA databaseguy When you watch movies like The Matrix, you find yourself calculating the fasibility of storing all that data. #youmightbeaDBA databaseguy You have tried to convince someone to spend money on an SSD storage array. #youmightbeaDBA databaseguy When CPU is spiked on a server, you want to gather forensic evidence. #youmightbeaDBA databaseguy You have to remind developers not to push code to production without checking if the database is ready. #youmightbeaDBA databaseguy Nobody cares what you wear to work, as long as the thing keeps running. #youmightbeaDBA databaseguy Telepathy is a job requirement when working with app dev teams. #youmightbeaDBA databaseguy You read database statistics for the educational value. #youmightbeaDBA databaseguy And your boss freely admits this to anyone within earshot. #youmightbeaDBA databaseguy Your boss cannot explain or understand what you do. #youmightbeaDBA databaseguy You envision ERDs when you see a GUI. #youmightbeaDBA databaseguy You say things like "applications come and go, but data lasts forever." #youmightbeaDBA databaseguy You have memorized the names of several of the AdventureWorks employees. #youmightbeaDBA databaseguy You know what MAXDOP setting you can get away with for a big query based on current server load. #youmightbeaDBA databaseguy And you immediately recognize the recursion in my last tweet. #youmightbeaDBA databaseguy You find 50 simultaneous tweets from @buckwoody about #youmightbeaDBA :O) DBAishness You have "funny stories" about the times your developers accidentally deleted the T-log in their test environment. #youmightbeaDBA DBAishness Planning to slice and dice your MDW data with PowerPivot makes you giggle like a schoolgirl. #youmightbeaDBA donalddotfarmer You think @buckwoody lives in the "real world." #youmightbeaDBA jamach09 @buckwoody #youmightbeaDBA Why go outside when you can sit in the nice cool server room? jamach09 If you refer to procreation as "Replication", #youmightbeaDBA. jamach09 If you think ORM is a four-letter word, #youmightbeaDBA JamesMarsh If you have ever preached the value of Source Code Control, #YouMightBeADBA jethrocarr @venzann You store your shopping list in a ACID compliant DB #youmightbeaDBA joe_positive @buckwoody thought it stood for "Don't Bother Asking" #youmightbeaDBA joe_positive when you check your IT Events Calendar before making weekend plans #youmightbeaDBA LadyRuna You cringe whenever someone calls Excel a database #youmightbeaDBA LadyRuna When the waiter says he'll be your server today, you ask how many terabytes he is #youmightbeaDBA LadyRuna you always call the asterisk a "Star" #youmightbeaDBA LadyRuna You walk into a server room, say "Nice RACK!" and everyone there knows you're talking about server rack... #youmightbeaDBA LadyRuna You receive more messages from servers than from friends #youmightbeaDBA LadyRuna hmmm... #youmightbeaDBA if your recipe for gumbo is "SELECT * FROM Refrigerator" markjholmes @SQLSoldier Heh. #youmightbeaDBA if you correct other DBAs' spelling of @PaulRandal markjholmes #youmightbeaDBA if you actually test RAID5 vs RAID10 on your SAN because when it comes to configuration, "it depends." markjholmes #youmightbeaDBA if you have at least 3 definitions of the word "cluster" MarlonRibunal 3 Words: @BrentO, snicker, & Access #youmightbeaDBA MarlonRibunal @onpnt @mikeSQL my appeal was a couple of mins late. Enjoying #youmightbeaDBA MarlonRibunal @mikeSQL @onpnt pls, don't mention bacon #youmightbeaDBA merv @buckwoody You HATE 3-way joins #youmightbeaDBA MidnightDBA If you're up at midnight Tweeting about SQL #youmightbeaDBA MidnightDBA @buckwoody I'd noticed that. :) #youmightbeaDBA mikeSQL when people talk about "their type" you're thinking varchar, bigint, binary, etc #youmightbeadba mikeSQL people ask you to go to lunch , but you can't go because you're attending #SQLlunch #youmightbeadba mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba mrdenny If you think that @buckwoody's demo using PowerPivot to analyze index usage data from DMVs is awesome then #youmightbeaDBA mrdenny You wish @PaulRandal still worked at Microsoft so that they would make a bobble head of him #youmightbeadba mrdenny When it's 11pm on a holiday weekend, and your posting stupid jokes on Twitter then #youmightbeadba mrdenny If you go out with friends and wonder why no one's wearing a kilt then #YouMightBeADBA mrdenny You can't do basic math, but you know off the top of your head how many CALs $14,412 can buy you. #YoumightbeaDBA mrdenny If you've ever setup a SQL Job to email you to get you out of a regularly scheduled meeting #YouMightBeADBA. mrdenny You throw up in your mouth a little when ever you here the word "Access". Even if it doesn't relate to a MS product. #YouMightBeADBA msdtjones You spend more time listening to @buckwoody than your wife #youmightbeaDBA NFDotCom You perform "hail deltas" on a regular basis. #YouMightBeADBA NoelMcKinney If you tell your wife you want to go to Columbus Ohio for your wedding anniversary so you can attend #sqlsat42 then #youmightbeaDBA NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA NoelMcKinney Someone asks you to throw another log on the fire and you tell them not to worry about it because Autogrowth is turned on #youmightbeaDBA Nuurdygirl Even if you have a girlfriend...its possible #youmightbeadba. Yeah-i said its possible! Nuurdygirl When your girlfriend has to lean around the laptop to kiss you goodnight #youmightbeadba Old_Man_Fish If you worry about how big your package is and how long it takes to finish #youmightbeaDBA Old_Man_Fish If you no longer wonder if someone is in trouble or died if you are getting calls at 2AM #youmightbeaDBA Old_Man_Fish If, when you hear the word ACCESS with no connotation you blood pressure jumps 50 points, #youmightbeaDBA onpnt When you hear the word inject you immediately get concerned if your databases are OK #youmightbeaDBA onpnt Your servers haven't been rebooted in a year #youmightbeaDBA onpnt You know why it's funny when @PaulRandal has the word, "Sheep" in a tweet #youmightbeaDBA onpnt You have read BOL without actually having a problem to figure out #youmightbeaDBA onpnt You can type "SELECT columns FROM tables" without typos but tipen ni Banglish ares a messis #youmightbeaDBA onpnt DR strategies doesn't include the word, RAID in them #youmightbeaDBA onpnt you can move a SQL Server instance to a new server without the users ever knowing #youmightbeaDBA onpnt You have made an SSIS package that is more than one step #youmightbeaDBA onpnt You have the balls to say no to your boss when they ask for the sa password #youmightbeaDBA onpnt you google to trouble shoot a problem and end up at your own blog (and it fixes it) #youmightbeaDBA onpnt You talk your wife into moving the family vacation a week earlier so you can attend the areas local SSUG meeting #youmightbeaDBA onpnt you can explain to a nontechnical person what a deadlock is #youmightbeaDBA onpnt You hope a girl asks you what your collation is #youmightbeaDBA onpnt you make jokes that include the words shrink, truncate and 1205. And you are the only one that laughs at them #youmightbeaDBA onpnt You rate your ability to stay awake to work longer on blogs, twitter, forums and your day to day job with the 5 9's goal #youmightbeaDBA onpnt you have major surgery and beg the doctor to release you back to work 5 days later because you miss your servers #youmightbeaDBA #TrueStory onpnt You do have backups and you know how to use them #youmightbeaDBA onpnt It's the network #youmightbeaDBA onpnt When the developers get to work your mood changes rapidly #youmightbeaDBA onpnt When someone says, "PASS", you first think of karaoke #youmightbeaDBA onpnt Recruiters try to get you to call them *just* because they think you'll give them @BrentO contact info #youmightbeaDBA onpnt You chuckle every time you go to grab the "CLR" Calcium, Lime and Rust Remover to clean something #youmightbeaDBA onpnt @MarlonRibunal @mikeSQL Sorry man, it was already in motion ;-) #youmightbeaDBA onpnt When you have an "I love bacon" sticker on your laptop. #youmightbeaDBA http://twitpic.com/1ry671 onpnt You sing SELECT statements in the shower #youmightbeaDBA onpnt When you see a chicken it doesn't remind you of food. It reminds you of a guy named Jorge #youmightbeaDBA onpnt At time, SQL is your mistress #youmightbeaDBA onpnt Your wife wonders if SQL is the code name of your mistress at times #youmightbeaDBA onpnt it's Friday and you are on twitter thinking really hard about what would be funny for hash tag #youmightbeaDBA onpnt You organize your wife's "decorative"pillows on the bed in a B-Tree structure #youmightbeaDBA PaulWhiteNZ If you: SELECT TOP (1) milk FROM fridge WHERE use_by_date >= GET_DATE() ORDER BY use_by_date ASC #YouMightBeaDBA RonDBA #youmightbeaDBA if you read @buckwoody's and @BrentO's blogs. ryaneastabrook @buckwoody omg, you have to stand up a website with these on them, they are awesome #youmightbeaDBA soulvy @StrateSQL @LadyRuna Or a "Splat" #youmightbeaDBA speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA speedracer You retweet @buckwoody on a Friday night #youmightbeaDBA speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA speedracer Developers make you twitch #youmightbeaDBA sqlagentman You know what X/1024*8 is. #YouMightBeADBA SqlAsylum Your still in the office at 5:00 on memorial day weekend. #youmightbeadba :) SQLBob Whenever someone you know gets pregnant you bring up INNER JOINs or SQL Injection attacks... #youmightbeaDBA SQLChicken You know one or more SQL folks in the community with an animal in their username #youmightbeaDBA SQLChicken You've used one or more car analogies to explain how a database works #youmightbeaDBA SQLChicken “@sqljoe: #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you” lmao nice! SQLChicken When talking about SSIS your discussions break down into various jokes about packages #youmightbeaDBA SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA SQLCraftsman You really own a "Stick of Much Developer Whacking" #YouMightBeADBA SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA SQLCraftsman Default Blame Acceptor #YouMightBeADBA SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA SQLCraftsman Default Blame Acceptor #YouMightBeADBA SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA sqljoe #youmightbeaDBA if you wished your wife knew T-sql. USE ShoppingList SELECT NecessaryItems from Supermarket WHERE Category<> ("junk food") sqljoe #youmightbeaDBA if the first thing you kiss when you wake up is your mobile for not waking you up in the middle of the night sqljoe #youmightbeaDBA if your wife has a "Do Not Fly" family vacation list of her own including your laptop and mobile sqljoe #youmightbeaDBA if you have researched for DBA Anonymous groups and attended a #SSUG willing to drop your database (vice) sqljoe #youmightbeaDBA if your only maintenance windows are staff meetings sqljoe #youmightbeaDBA if you think of yourself as "The One" in The Matrix "balancing the equation" from The Architect's (developers) poor coding sqljoe #youmightbeaDBA if you think @PaulRandal should have played the Oracle in The Matrix sqljoe #youmightbeaDBA if home CD & Movie collection is stored in secured containers,in logical order & naming convention,and with a backup copy sqljoe #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you sqljoe #youmightbeaDBA if you have tried to TiVo @MidnightDBA broadcasts sqljoe #youmightbeaDBA if your #sql user group feels like #AA meetings sqljoe #youmightbeaDBA if you thought of bringing your #sql books to #sqlsaturday and #sqlpass for autographs sqljoe #youmightbeaDBA if #sqlpass feels like the #oscars sqljoe #youmightbeaDBA if you are proud of your small package SQLLawman #youmightbeaDBA when you hear MDX and Acura is not first thought that comes to mind. sqlrunner If your wife double checks that there isn't a SQLSat within 200 miles of your vacation destination #youmightbeaDBA sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA sqlrunner You treat the word 'access' as a verb, not a noun #youmightbeaDBA sqlrunner If you are happy with sub-second performance #youmightbeaDBA sqlrunner When you know the names of the NOC people AND their families #youmightbeadba sqlrunner When you know the names of the NOC people AND their families #youmightbeadba sqlrunner Your company set's up international phone coverage for your cruise #youmightbeaDBA sqlsamson @buckwoody if your manager asks you for data and you respond with "there's a script for that" #youmightbeadba sqlsamson @buckwoody If you receive more messages from your server then your spouse #youmightbeadba SQLSoldier You've spent all night Valentines Day upgrading the SQL Servers and forgot to tell your wife you'd be working late. #youmightbeadba SQLSoldier You're flattered when someone calls you a geek. #youmightbeadba SQLSoldier @llangit @mrdenny it's 11pm on a holiday weekend, & your reading stupid jokes on Twitter then #youmightbeadba SQLSoldier Your manager borrows lunch money from you because your salary is 30% higher than his. #youmightbeaDBA SQLSoldier You think "intellisense" is a double negative because it's not intelligent nor makes sense. #youmightbeaDBA SQLSoldier 75% of the emails you receive at home have the phrase "now following you on Twitter!" in the subject line. #youmightbeaDBA SQLSoldier You petition Ken Burns to remake Office Space because it should have been 18 hours long. #youmightbeaDBA SQLSoldier You select a candidate for a Jr DBA position because his resume said he's willing to get your coffee. #youmightbeaDBA SQLSoldier Somebody misquotes @PaulRandall and you call him on your cell to verify. #youmightbeaDBA SQLSoldier You wish the elevator in your building was slower because it's the last time you'll be left alone all day. #youmightbeaDBA SQLSoldier The developers sacrifice small animals before giving you their code for review. #youmightbeaDBA SQLSoldier Developers bring you coffee and a BLT when you review their code. #youmightbeaDBA #IWish SQLSoldier You can get out of any family get-together by saying you have to work and nobody questions it. #youmightbeaDBA SQLSoldier You've requested a HP Superdome for you "test" box. #youmightbeaDBA SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA SQLSoldier A dev. asks if you've heard about some great new feature in SQL and you show the 16 blog posts you wrote on it ... last year #youmightbeaDBA SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA #TrueStory SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA SQLSoldier You use a cell phone service coverage map to plan your next vacation. #youmightbeaDBA SQLSoldier You come in to work at 7 AM because it gives you at least 3 hours without any developers around. #youmightbeaDBA SQLSoldier You figure out a way to make take your wife on a cruise and deduct it as a business expense. #youmightbeaDBA #sqlcruise SQLSoldier You name your cat SQLDog because the name @SQLCat was already taken. #youmightbeaDBA SQLSoldier You rate your blog posts based on the number of retweets you get. #youmightbeaDBA SQLSoldier You disable random logins just to mess with people. #youmightbeaDBA SQLSoldier You fall for the pickup line, "Hey baby, what's your collation?" #youmightbeaDBA SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA SQLSoldier Your think the 4 food groups are coffee, bacon, fast food, and Mountain Dew. #youmightbeaDBA SQLSoldier You tell someone your job title and they ask "What?" You describe it and they ask "What?". So you say "computer geek". #youmightbeaDBA SQLSoldier The #1 referrer to your blog is Twitter.com. #youmightbeaDBA SQLSoldier Your idea of a good time on a Saturday involves free training. #youmightbeaDBA #sqlsat43 SQLSoldier You write a book that all of your co-workers have and none have read it. #youmightbeaDBA SQLSoldier You write a book that sells a couple thousand copies and is heralded a best seller. #youmightbeaDBA SQLSoldier No matter how sick you are, you go to work if it's time to pass the pager on to the next guy. #youmightbeaDBA #TrueStory SQLSoldier You go out on the town, and strangers walk up to you and say, "Hey you're that SQL guy" #youmightbeaDBA #TrueStory SQLSoldier Your wife asks you to fix something, and you request a downtime window. #youmightbeaDBA SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA SQLSoldier Your best pickup line, "Hey baby, what's your collation?" #youmightbeaDBA SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA SQLSoldier You list TSQL as your native language on the 2010 census. #youmightbeaDBA SQLSoldier Starbucks' stock price drops every time you go on vacation. #youmightbeaDBA SQLSoldier You're happy when the web master says that the website is down. #youmightbeaDBA SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA SQLSoldier You get mad when someone calls your car a "heap" because you've always considered it to be a "clustered index". #youmightbeaDBA SQLSoldier Your blog has more hits than your company's website. #youmightbeaDBA SQLSoldier You systematically remove the asterisk key from all keyboards in the company except yours. #youmightbeaDBA SQLSoldier When asked if you recycle, you reply that you run sp_cycle_errorlog every night at midnight #youmightbeaDBA SQLSoldier You wouldn't allow someone named @AdamMachanic to work on your car. #youmightbeaDBA SQLSoldier You switch offices every 3 days to avoid developers #youmightbeaDBA SQLSoldier PSS has your number on speed dial. #youmightbeaDBA SQLSoldier You frown when you they tell Neo that he's going to the Oracle #youmightbeaDBA swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA Tarwn A pleasurable saturday means spending the day learning more about what you already do the rest of the week #youmightbeaDBA ...oh, wait... thelostforum For great justice; all our base are belong to YOU !! #youmightbeadba thelostforum @SQLSoldier: You need a witness to use a mirror #youmightbeaDBA ;) TimCost you capitalize key words. always. everywhere. you can't help it, usually don't even notice. #youmightbeaDBA Toshana Your the only one in your company not impressed with the developers new application. #youmightbeaDBA venzann Coming soon from a (respected) book publisher - @buckwoody's #youmightbeaDBA venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets... venzann I love the #youmightbeaDBA tag. Found at least 6 new DBAs to follow.. venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets... venzann You use #sqlhelp as a primary resource during troubleshooting #youmightbeaDBA venzann You insist on stricter password security for your sql servers than you implement on your own laptop #youmightbeaDBA WesBrownSQL @buckwoody you are up so late the only tweets you see are from @buckwoody #youmightbeaDBA WesBrownSQL @SQLSoldier you are upgrading all your 2005 prod servers to 2008 R2 on a three day weekend... #youmightbeaDBA zippy1981 #youmightbeaDBA if everytime you do something with #mongodb you think of the Vulcan proverb "only Nixon could go to China." Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

Windows Azure: Import/Export Hard Drives, VM ACLs, Web Sockets, Remote Debugging, Continuous Delivery, New Relic, Billing Alerts and More

- by ScottGu

Two weeks ago we released a giant set of improvements to Windows Azure, as well as a significant update of the Windows Azure SDK. This morning we released another massive set of enhancements to Windows Azure. Today’s new capabilities include: Storage: Import/Export Hard Disk Drives to your Storage Accounts HDInsight: General Availability of our Hadoop Service in the cloud Virtual Machines: New VM Gallery, ACL support for VIPs Web Sites: WebSocket and Remote Debugging Support Notification Hubs: Segmented customer push notification support with tag expressions TFS & GIT: Continuous Delivery Support for Web Sites + Cloud Services Developer Analytics: New Relic support for Web Sites + Mobile Services Service Bus: Support for partitioned queues and topics Billing: New Billing Alert Service that sends emails notifications when your bill hits a threshold you define All of these improvements are now available to use immediately (note that some features are still in preview). Below are more details about them. Storage: Import/Export Hard Disk Drives to Windows Azure I am excited to announce the preview of our new Windows Azure Import/Export Service! The Windows Azure Import/Export Service enables you to move large amounts of on-premises data into and out of your Windows Azure Storage accounts. It does this by enabling you to securely ship hard disk drives directly to our Windows Azure data centers. Once we receive the drives we’ll automatically transfer the data to or from your Windows Azure Storage account. This enables you to import or export massive amounts of data more quickly and cost effectively (and not be constrained by available network bandwidth). Encrypted Transport Our Import/Export service provides built-in support for BitLocker disk encryption – which enables you to securely encrypt data on the hard drives before you send it, and not have to worry about it being compromised even if the disk is lost/stolen in transit (since the content on the transported hard drives is completely encrypted and you are the only one who has the key to it). The drive preparation tool we are shipping today makes setting up bitlocker encryption on these hard drives easy. How to Import/Export your first Hard Drive of Data You can read our Getting Started Guide to learn more about how to begin using the import/export service. You can create import and export jobs via the Windows Azure Management Portal as well as programmatically using our Server Management APIs. It is really easy to create a new import or export job using the Windows Azure Management Portal. Simply navigate to a Windows Azure storage account, and then click the new Import/Export tab now available within it (note: if you don’t have this tab make sure to sign-up for the Import/Export preview): Then click the “Create Import Job” or “Create Export Job” commands at the bottom of it. This will launch a wizard that easily walks you through the steps required: For more comprehensive information about Import/Export, refer to Windows Azure Storage team blog. You can also send questions and comments to the [email protected] email address. We think you’ll find this new service makes it much easier to move data into and out of Windows Azure, and it will dramatically cut down the network bandwidth required when working on large data migration projects. We hope you like it. HDInsight: 100% Compatible Hadoop Service in the Cloud Last week we announced the general availability release of Windows Azure HDInsight. HDInsight is a 100% compatible Hadoop service that allows you to easily provision and manage Hadoop clusters for big data processing in Windows Azure. This release is now live in production, backed by an enterprise SLA, supported 24x7 by Microsoft Support, and is ready to use for production scenarios. HDInsight allows you to use Apache Hadoop tools, such as Pig and Hive, to process large amounts of data in Windows Azure Blob Storage. Because data is stored in Windows Azure Blob Storage, you can choose to dynamically create Hadoop clusters only when you need them, and then shut them down when they are no longer required (since you pay only for the time the Hadoop cluster instances are running this provides a super cost effective way to use them). You can create Hadoop clusters using either the Windows Azure Management Portal (see below) or using our PowerShell and Cross Platform Command line tools: The import/export hard drive support that came out today is a perfect companion service to use with HDInsight – the combination allows you to easily ingest, process and optionally export a limitless amount of data. We’ve also integrated HDInsight with our Business Intelligence tools, so users can leverage familiar tools like Excel in order to analyze the output of jobs. You can find out more about how to get started with HDInsight here. Virtual Machines: VM Gallery Enhancements Today’s update of Windows Azure brings with it a new Virtual Machine gallery that you can use to create new VMs in the cloud. You can launch the gallery by doing New->Compute->Virtual Machine->From Gallery within the Windows Azure Management Portal: The new Virtual Machine Gallery includes some nice enhancements that make it even easier to use: Search: You can now easily search and filter images using the search box in the top-right of the dialog. For example, simply type “SQL” and we’ll filter to show those images in the gallery that contain that substring. Category Tree-view: Each month we add more built-in VM images to the gallery. You can continue to browse these using the “All” view within the VM Gallery – or now quickly filter them using the category tree-view on the left-hand side of the dialog. For example, by selecting “Oracle” in the tree-view you can now quickly filter to see the official Oracle supplied images. MSDN and Supported checkboxes: With today’s update we are also introducing filters that makes it easy to filter out types of images that you may not be interested in. The first checkbox is MSDN: using this filter you can exclude any image that is not part of the Windows Azure benefits for MSDN subscribers (which have highly discounted pricing - you can learn more about the MSDN pricing here). The second checkbox is Supported: this filter will exclude any image that contains prerelease software, so you can feel confident that the software you choose to deploy is fully supported by Windows Azure and our partners. Sort options: We sort gallery images by what we think customers are most interested in, but sometimes you might want to sort using different views. So we’re providing some additional sort options, like “Newest,” to customize the image list for what suits you best. Pricing information: We now provide additional pricing information about images and options on how to cost effectively run them directly within the VM Gallery. The above improvements make it even easier to use the VM Gallery and quickly create launch and run Virtual Machines in the cloud. Virtual Machines: ACL Support for VIPs A few months ago we exposed the ability to configure Access Control Lists (ACLs) for Virtual Machines using Windows PowerShell cmdlets and our Service Management API. With today’s release, you can now configure VM ACLs using the Windows Azure Management Portal as well. You can now do this by clicking the new Manage ACL command in the Endpoints tab of a virtual machine instance: This will enable you to configure an ordered list of permit and deny rules to scope the traffic that can access your VM’s network endpoints. For example, if you were on a virtual network, you could limit RDP access to a Windows Azure virtual machine to only a few computers attached to your enterprise. Or if you weren’t on a virtual network you could alternatively limit traffic from public IPs that can access your workloads: Here is the default behaviors for ACLs in Windows Azure: By default (i.e. no rules specified), all traffic is permitted. When using only Permit rules, all other traffic is denied. When using only Deny rules, all other traffic is permitted. When there is a combination of Permit and Deny rules, all other traffic is denied. Lastly, remember that configuring endpoints does not automatically configure them within the VM if it also has firewall rules enabled at the OS level. So if you create an endpoint using the Windows Azure Management Portal, Windows PowerShell, or REST API, be sure to also configure your guest VM firewall appropriately as well. Web Sites: Web Sockets Support With today’s release you can now use Web Sockets with Windows Azure Web Sites. This feature enables you to easily integrate real-time communication scenarios within your web based applications, and is available at no extra charge (it even works with the free tier). Higher level programming libraries like SignalR and socket.io are also now supported with it. You can enable Web Sockets support on a web site by navigating to the Configure tab of a Web Site, and by toggling Web Sockets support to “on”: Once Web Sockets is enabled you can start to integrate some really cool scenarios into your web applications. Check out the new SignalR documentation hub on www.asp.net to learn more about some of the awesome scenarios you can do with it. Web Sites: Remote Debugging Support The Windows Azure SDK 2.2 we released two weeks ago introduced remote debugging support for Windows Azure Cloud Services. With today’s Windows Azure release we are extending this remote debugging support to also work with Windows Azure Web Sites. With live, remote debugging support inside of Visual Studio, you are able to have more visibility than ever before into how your code is operating live in Windows Azure. It is now super easy to attach the debugger and quickly see what is going on with your application in the cloud. Remote Debugging of a Windows Azure Web Site using VS 2013 Enabling the remote debugging of a Windows Azure Web Site using VS 2013 is really easy. Start by opening up your web application’s project within Visual Studio. Then navigate to the “Server Explorer” tab within Visual Studio, and click on the deployed web-site you want to debug that is running within Windows Azure using the Windows Azure->Web Sites node in the Server Explorer. Then right-click and choose the “Attach Debugger” option on it: When you do this Visual Studio will remotely attach the debugger to the Web Site running within Windows Azure. The debugger will then stop the web site’s execution when it hits any break points that you have set within your web application’s project inside Visual Studio. For example, below I set a breakpoint on the “ViewBag.Message” assignment statement within the HomeController of the standard ASP.NET MVC project template. When I hit refresh on the “About” page of the web site within the browser, the breakpoint was triggered and I am now able to debug the app remotely using Visual Studio: Note above how we can debug variables (including autos/watchlist/etc), as well as use the Immediate and Command Windows. In the debug session above I used the Immediate Window to explore some of the request object state, as well as to dynamically change the ViewBag.Message property. When we click the the “Continue” button (or press F5) the app will continue execution and the Web Site will render the content back to the browser. This makes it super easy to debug web apps remotely. Tips for Better Debugging To get the best experience while debugging, we recommend publishing your site using the Debug configuration within Visual Studio’s Web Publish dialog. This will ensure that debug symbol information is uploaded to the Web Site which will enable a richer debug experience within Visual Studio. You can find this option on the Web Publish dialog on the Settings tab: When you ultimately deploy/run the application in production we recommend using the “Release” configuration setting – the release configuration is memory optimized and will provide the best production performance. To learn more about diagnosing and debugging Windows Azure Web Sites read our new Troubleshooting Windows Azure Web Sites in Visual Studio guide. Notification Hubs: Segmented Push Notification support with tag expressions In August we announced the General Availability of Windows Azure Notification Hubs - a powerful Mobile Push Notifications service that makes it easy to send high volume push notifications with low latency from any mobile app back-end. Notification hubs can be used with any mobile app back-end (including ones built using our Mobile Services capability) and can also be used with back-ends that run in the cloud as well as on-premises. Beginning with the initial release, Notification Hubs allowed developers to send personalized push notifications to both individual users as well as groups of users by interest, by associating their devices with tags representing the logical target of the notification. For example, by registering all devices of customers interested in a favorite MLB team with a corresponding tag, it is possible to broadcast one message to millions of Boston Red Sox fans and another message to millions of St. Louis Cardinals fans with a single API call respectively. New support for using tag expressions to enable advanced customer segmentation With today’s release we are adding support for even more advanced customer targeting. You can now identify customers that you want to send push notifications to by defining rich tag expressions. With tag expressions, you can now not only broadcast notifications to Boston Red Sox fans, but take that segmenting a step farther and reach more granular segments. This opens up a variety of scenarios, for example: Offers based on multiple preferences—e.g. send a game day vegetarian special to users tagged as both a Boston Red Sox fan AND a vegetarian Push content to multiple segments in a single message—e.g. rain delay information only to users who are tagged as either a Boston Red Sox fan OR a St. Louis Cardinal fan Avoid presenting subsets of a segment with irrelevant content—e.g. season ticket availability reminder to users who are tagged as a Boston Red Sox fan but NOT also a season ticket holder To illustrate with code, consider a restaurant chain app that sends an offer related to a Red Sox vs Cardinals game for users in Boston. Devices can be tagged by your app with location tags (e.g. “Loc:Boston”) and interest tags (e.g. “Follows:RedSox”, “Follows:Cardinals”), and then a notification can be sent by your back-end to “(Follows:RedSox || Follows:Cardinals) && Loc:Boston” in order to deliver an offer to all devices in Boston that follow either the RedSox or the Cardinals. This can be done directly in your server backend send logic using the code below: var notification = new WindowsNotification(messagePayload); hub.SendNotificationAsync(notification, "(Follows:RedSox || Follows:Cardinals) && Loc:Boston"); In your expressions you can use all Boolean operators: AND (&&), OR (||), and NOT (!). Some other cool use cases for tag expressions that are now supported include: Social: To “all my group except me” - group:id && !user:id Events: Touchdown event is sent to everybody following either team or any of the players involved in the action: Followteam:A || Followteam:B || followplayer:1 || followplayer:2 … Hours: Send notifications at specific times. E.g. Tag devices with time zone and when it is 12pm in Seattle send to: GMT8 && follows:thaifood Versions and platforms: Send a reminder to people still using your first version for Android - version:1.0 && platform:Android For help on getting started with Notification Hubs, visit the Notification Hub documentation center. Then download the latest NuGet package (or use the Notification Hubs REST APIs directly) to start sending push notifications using tag expressions. They are really powerful and enable a bunch of great new scenarios. TFS & GIT: Continuous Delivery Support for Web Sites + Cloud Services With today’s Windows Azure release we are making it really easy to enable continuous delivery support with Windows Azure and Team Foundation Services. Team Foundation Services is a cloud based offering from Microsoft that provides integrated source control (with both TFS and Git support), build server, test execution, collaboration tools, and agile planning support. It makes it really easy to setup a team project (complete with automated builds and test runners) in the cloud, and it has really rich integration with Visual Studio. With today’s Windows Azure release it is now really easy to enable continuous delivery support with both TFS and Git based repositories hosted using Team Foundation Services. This enables a workflow where when code is checked in, built successfully on an automated build server, and all tests pass on it – I can automatically have the app deployed on Windows Azure with zero manual intervention or work required. The below screen-shots demonstrate how to quickly setup a continuous delivery workflow to Windows Azure with a Git-based ASP.NET MVC project hosted using Team Foundation Services. Enabling Continuous Delivery to Windows Azure with Team Foundation Services The project I’m going to enable continuous delivery with is a simple ASP.NET MVC project whose source code I’m hosting using Team Foundation Services. I did this by creating a “SimpleContinuousDeploymentTest” repository there using Git – and then used the new built-in Git tooling support within Visual Studio 2013 to push the source code to it. Below is a screen-shot of the Git repository hosted within Team Foundation Services: I can access the repository within Visual Studio 2013 and easily make commits with it (as well as branch, merge and do other tasks). Using VS 2013 I can also setup automated builds to take place in the cloud using Team Foundation Services every time someone checks in code to the repository: The cool thing about this is that I don’t have to buy or rent my own build server – Team Foundation Services automatically maintains its own build server farm and can automatically queue up a build for me (for free) every time someone checks in code using the above settings. This build server (and automated testing) support now works with both TFS and Git based source control repositories. Connecting a Team Foundation Services project to Windows Azure Once I have a source repository hosted in Team Foundation Services with Automated Builds and Testing set up, I can then go even further and set it up so that it will be automatically deployed to Windows Azure when a source code commit is made to the repository (assuming the Build + Tests pass). Enabling this is now really easy. To set this up with a Windows Azure Web Site simply use the New->Compute->Web Site->Custom Create command inside the Windows Azure Management Portal. This will create a dialog like below. I gave the web site a name and then made sure the “Publish from source control” checkbox was selected: When we click next we’ll be prompted for the location of the source repository. We’ll select “Team Foundation Services”: Once we do this we’ll be prompted for our Team Foundation Services account that our source repository is hosted under (in this case my TFS account is “scottguthrie”): When we click the “Authorize Now” button we’ll be prompted to give Windows Azure permissions to connect to the Team Foundation Services account. Once we do this we’ll be prompted to pick the source repository we want to connect to. Starting with today’s Windows Azure release you can now connect to both TFS and Git based source repositories. This new support allows me to connect to the “SimpleContinuousDeploymentTest” respository we created earlier: Clicking the finish button will then create the Web Site with the continuous delivery hooks setup with Team Foundation Services. Now every time someone pushes source control to the repository in Team Foundation Services, it will kick off an automated build, run all of the unit tests in the solution , and if they pass the app will be automatically deployed to our Web Site in Windows Azure. You can monitor the history and status of these automated deployments using the Deployments tab within the Web Site: This enables a really slick continuous delivery workflow, and enables you to build and deploy apps in a really nice way. Developer Analytics: New Relic support for Web Sites + Mobile Services With today’s Windows Azure release we are making it really easy to enable Developer Analytics and Monitoring support with both Windows Azure Web Site and Windows Azure Mobile Services. We are partnering with New Relic, who provide a great dev analytics and app performance monitoring offering, to enable this - and we have updated the Windows Azure Management Portal to make it really easy to configure. Enabling New Relic with a Windows Azure Web Site Enabling New Relic support with a Windows Azure Web Site is now really easy. Simply navigate to the Configure tab of a Web Site and scroll down to the “developer analytics” section that is now within it: Clicking the “add-on” button will display some additional UI. If you don’t already have a New Relic subscription, you can click the “view windows azure store” button to obtain a subscription (note: New Relic has a perpetually free tier so you can enable it even without paying anything): Clicking the “view windows azure store” button will launch the integrated Windows Azure Store experience we have within the Windows Azure Management Portal. You can use this to browse from a variety of great add-on services – including New Relic: Select “New Relic” within the dialog above, then click the next button, and you’ll be able to choose which type of New Relic subscription you wish to purchase. For this demo we’ll simply select the “Free Standard Version” – which does not cost anything and can be used forever: Once we’ve signed-up for our New Relic subscription and added it to our Windows Azure account, we can go back to the Web Site’s configuration tab and choose to use the New Relic add-on with our Windows Azure Web Site. We can do this by simply selecting it from the “add-on” dropdown (it is automatically populated within it once we have a New Relic subscription in our account): Clicking the “Save” button will then cause the Windows Azure Management Portal to automatically populate all of the needed New Relic configuration settings to our Web Site: Deploying the New Relic Agent as part of a Web Site The final step to enable developer analytics using New Relic is to add the New Relic runtime agent to our web app. We can do this within Visual Studio by right-clicking on our web project and selecting the “Manage NuGet Packages” context menu: This will bring up the NuGet package manager. You can search for “New Relic” within it to find the New Relic agent. Note that there is both a 32-bit and 64-bit edition of it – make sure to install the version that matches how your Web Site is running within Windows Azure (note: you can configure your Web Site to run in either 32-bit or 64-bit mode using the Web Site’s “Configuration” tab within the Windows Azure Management Portal): Once we install the NuGet package we are all set to go. We’ll simply re-publish the web site again to Windows Azure and New Relic will now automatically start monitoring the application Monitoring a Web Site using New Relic Now that the application has developer analytics support with New Relic enabled, we can launch the New Relic monitoring portal to start monitoring the health of it. We can do this by clicking on the “Add Ons” tab in the left-hand side of the Windows Azure Management Portal. Then select the New Relic add-on we signed-up for within it. The Windows Azure Management Portal will provide some default information about the add-on when we do this. Clicking the “Manage” button in the tray at the bottom will launch a new browser tab and single-sign us into the New Relic monitoring portal associated with our account: When we do this a new browser tab will launch with the New Relic admin tool loaded within it: We can now see insights into how our app is performing – without having to have written a single line of monitoring code. The New Relic service provides a ton of great built-in monitoring features allowing us to quickly see: Performance times (including browser rendering speed) for the overall site and individual pages. You can optionally set alert thresholds to trigger if the speed does not meet a threshold you specify. Information about where in the world your customers are hitting the site from (and how performance varies by region) Details on the latency performance of external services your web apps are using (for example: SQL, Storage, Twitter, etc) Error information including call stack details for exceptions that have occurred at runtime SQL Server profiling information – including which queries executed against your database and what their performance was And a whole bunch more… The cool thing about New Relic is that you don’t need to write monitoring code within your application to get all of the above reports (plus a lot more). The New Relic agent automatically enables the CLR profiler within applications and automatically captures the information necessary to identify these. This makes it super easy to get started and immediately have a rich developer analytics view for your solutions with very little effort. If you haven’t tried New Relic out yet with Windows Azure I recommend you do so – I think you’ll find it helps you build even better cloud applications. Following the above steps will help you get started and deliver you a really good application monitoring solution in only minutes. Service Bus: Support for partitioned queues and topics With today’s release, we are enabling support within Service Bus for partitioned queues and topics. Enabling partitioning enables you to achieve a higher message throughput and better availability from your queues and topics. Higher message throughput is achieved by implementing multiple message brokers for each partitioned queue and topic. The multiple messaging stores will also provide higher availability. You can create a partitioned queue or topic by simply checking the Enable Partitioning option in the custom create wizard for a Queue or Topic: Read this article to learn more about partitioned queues and topics and how to take advantage of them today. Billing: New Billing Alert Service Today’s Windows Azure update enables a new Billing Alert Service Preview that enables you to get proactive email notifications when your Windows Azure bill goes above a certain monetary threshold that you configure. This makes it easier to manage your bill and avoid potential surprises at the end of the month. With the Billing Alert Service Preview, you can now create email alerts to monitor and manage your monetary credits or your current bill total. To set up an alert first sign-up for the free Billing Alert Service Preview. Then visit the account management page, click on a subscription you have setup, and then navigate to the new Alerts tab that is available: The alerts tab allows you to setup email alerts that will be sent automatically once a certain threshold is hit. For example, by clicking the “add alert” button above I can setup a rule to send myself email anytime my Windows Azure bill goes above $100 for the month: The Billing Alert Service will evolve to support additional aspects of your bill as well as support multiple forms of alerts such as SMS. Try out the new Billing Alert Service Preview today and give us feedback. Summary Today’s Windows Azure release enables a ton of great new scenarios, and makes building applications hosted in the cloud even easier. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today. Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

WWDC and Tech Ed: A Tale of Two DevCons

- by andrewbrust

Next week marks the first full week of June. Summer will feel in full swing and it will be a pretty big season for technology. In seeming acknowledgement of that very fact, both Apple and Microsoft will be holding large developers conferences starting Monday. Apple will hold its annual Worldwide Developers Conference (WWDC) in lovely San Francisco and Microsoft will hold its Tech Ed conference in muggy, oil-laden yet soulful New Orleans. A brief survey of each show reveals much about the differences in each company’s offerings, strategy, and approach to customers and partners. In the interest of full disclosure, I must explain that I will be speaking at Microsoft’s Tech Ed show, and have done so, on and off, since 2003. I have never been to an Apple conference and, as readers of this blog may know, I acquired my first ever Apple product 2 months ago when I bought an iPad on the day of that product’s launch. I think I have keen insights into Microsoft’s conference. My ability to comment on Apple’s event ranges somewhere between backseat driver and naive observer. Just so you know. Although both shows cater to their respective company’s developers, there are a number of differences in the events’ purposes and content approaches. First off, let’s consider each show as a news and PR vehicle. WWDC will feature Steve Jobs’ keynote address and most likely will be where Apple officially reveals details of its 4th-generation iPhone. Jobs will likely also provide deep background information on the corresponding iPhone OS release. These presumed announcements will make the show a magnet for the tech press and tech blogger elite. Apple’s customers will be interested too, especially since the iPhone OS release will likely be made available to owners of existing iPhone, iPod Touch and iPad devices. Tech Ed, on the other hand, may not be especially newsworthy at all. The keynote address will be given by Bob Muglia, who is President of the company’s Server and Tools Division, and he’ll likely be reviewing things more than previewing them. That’s because the company has, in the last 6-8 months, already released new versions of a majority of its products, including Windows, Office, SharePoint, SQL Server, Exchange, its Azure cloud platform, its .NET software development layer, its Silverlight Rich Internet Application (RIA) technology and its Visual Studio developer suite. Redmond’s product pipeline has functioned more like a firehose of late, and the company has a ton of work to do to get developers up to speed on everything that’s new. I know I keep saying “developers,” but in Tech Ed’s case, that’s not really accurate. In North America, Tech Ed caters to both developers and IT pros (i.e. technologists who work with physical IT infrastructure, as well as security and administration of the server software that runs on it). This pairing has, since its inception, struck some as anomalous and others, including many exhibitors, as very smart. Certainly, it means Tech Ed ends up being a confab for virtually all professionals in Microsoft’s ecosystem. And this year, Microsoft’s Business Intelligence (BI) conference will be co-located with Tech Ed, further enhancing that fusion effect. Clearly then, Microsoft’s show will focus on education, as its name assures us. Apple’s will serve as both a press event and an opportunity to get its own App Store developer channel synced up with its newest technology advances. For example, we already know that iPhone OS 4.0 will provide for a limited multitasking capability; that will only work well if people know how to code to it in a capable way. Apple also told us its iAd advertising platform will be part of the new OS, and Steve Jobs insists that’s to provide a revenue opportunity for developers. This too, then, needs to be explicated and soaked up buy the faithful. A look at each show’s breakout session lineup provides some interesting takeaways. WWDC will have very few Mac-specific sessions on offer, and virtually no sessions that at are IT- or “Enterprise-“ related. It’s all about the phone, music players and tablets. However, WWDC will have plenty of low-level, hardcore tech coverage of such things as Advanced Memory Analysis and Creating Secure Applications, as well as lots of rich media-related content like Core Animation and Game Design and Development. Beyond Apple’s proprietary platform, WWDC will also feature an array of sessions on HTML 5 and other Web standards. In all, WWDC offers over 100 technical sessions and hands-on labs. What about Tech Ed’s editorial content? Like the target audience, it really runs the gamut. The show has 21 tracks (versus WWDC’s 5) and more than 745 “learning opportunities” which include breakout sessions, demo stations, hands-on labs and BIrds of a Feather discussion sessions. Topics range from Architecture talks like Patterns of Parallel Programming to cloud computing talks like Building High Capacity Compute Applications with Windows Azure to IT-focused topics like Virtualization of Microsoft SharePoint 2010 Farm Architecture. I also count 19 sessions on Windows Phone 7. Unfortunately, with regard to Web standards and HTML 5, only a few sessions are offered, all of them specific to Internet Explorer. All-in-all, Apple’s show looks more exciting and “sexier” than Tech Ed. Microsoft’s show seems a lot more enterprise-focused than WWDC. This is, of course, well in sync with each company’s approach and products. Microsoft’s content is much wider ranging and bests WWDC in sheer volume of sessions and labs. I suppose some might argue that less is more; others that Apple’s consumer-focused offerings simply don’t provide for the same depth of coverage to a business audience. Microsoft has a serious focus on the cloud and a paucity of coverage on client-side Web standards; Apple has virtually no cloud offering at all. Again, this reflects each tech titan’s go-to-market strategy. My own take is that employees of each company should attend the other’s event. The amount of mutual exclusivity in content may make sense in terms of corporate philosophy, but the reality is that each company could stand to diversify into the other’s territory, at least somewhat. My own talk at Tech Ed will focus on competitive analysis around Microsoft’s BI products. Apple does not today figure into that analysis. Maybe one day it will.

Read the article

Win a set of Infragistics Silverlight Controls with Data Visualization!

- by mbcrump

Infragistics recently released their new Silverlight Data Visualization Controls. I saw a couple of samples and had to take a look. I headed over to their website and downloaded the controls. I first noticed the hospital floor-plan demo shown on their site and started thinking of ways that I could use this in my own organization. I emailed them asking if I could give away the Silverlight Data Visualization controls on my site and they said, Yes! They also wanted to throw in the standard Silverlight Line of Business controls. (combined they are worth about $3000 US). I am very thankful they were willing to help the Silverlight community with this giveaway. So some quick rules below: ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of Infragistics Silverlight Controls with Data Visualization ($3000 Value) Random winner will be announced on January 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) For extra entries simply: Retweet a link to this page using the following URL [ http://mcrump.me/iscfree ]. It does not matter what the tweet says, just as long as the URL is the same. Unlimited tweets, but please don’t go crazy! This URL will allow me to track the users that Tweet this page. Don’t forget to visit Infragistics because they made this possible. ---------------------------------------------------------------------------------------------------------------------------------------------------------- Before we get started with the Silverlight Controls, here is a couple of links to bookmark: The Silverlight Line of Business Control page is here. You can also check out the live demos here. The Data Visualization page is here. You can also check out the live demos here. Don’t worry about the Samples/Help Documentation. You can install all of that to your local HDD when you are installing it. I am going to walk you through the Silverlight Controls recently released by Infragistics. Begin by downloading the trial version and running the executable. If you downloaded the Complete bundle then you will have the following options to pick from. I like having help documentation and samples on my local HDD in case I do not have access to the internet and want to code. After it is installed, you may want to take a look at your Toolbox in Visual Studio 2010. Look for NetAdvantage 10.3 Silverlight and you will see that you now have access to all of these controls. At this point, to use the controls it’s as simple as drag/drop onto your Silverlight container. It will create the proper Namespaces for you. I wanted to highlight a few of the controls that I liked the most: Grid – After using the Infragistics grid you will wonder how you ever survived using the grid supplied by Microsoft standard controls. This grid was designed to get your application up and running very fast. It’s simple to bind, it handles LARGE DataSets, easy to filter and allows endless possibilities of formatting data. The screenshot below is an example of the grid. For a real-time updating demo click here. SpellChecker- If your users are creating emails or performing any other function that requires Spell Checking then this control is great. Check out the screenshots below: In this first screen, I have a word that is not in the dictionary [DotNet]. The Spell Checker finds the word and allows the user to correct it. What is so great about Infragistics controls is that it only takes a few lines of code to have a full-featured Spell Checker in your application. TagCloud – This is a control that I haven’t seen anywhere else. It allows you to create keywords for popular search terms. This is very similar to TagCloud seen all over the internet. Below is a screenshot that shows “Facebook” being a very popular item in the cloud. You can link these items to a hyperlink if you wanted. Importing/Exporting from Excel – I work with data a majority of the time. We all know the importance of Excel in our organizations, its used a lot. With Infragistics controls it make importing and exporting data from a Grid into Excel a snap. One of the things that I liked most about this control was the option to choose the Excel format (2003 or 2007). I haven’t seen this feature in other controls. Creating/Saving/Extracting/Uploading Zip Files – This is another control that I haven’t seen many others making. It allows you to basically manipulate a zip file in any way you like. You can even create a password on the zip file. Schedule – The Schedule that Infragistics provides resembles Outlook’s calendar. I think that it’s important for a user to see your app for the first time and immediately be able to start using because they are already familiar with the UI. The Schedule control accomplishes that in my opinion. I have just barely scratched the surface with the Infragistics Silverlight Line of Business controls. To check all of them then click here. A quick thing to note is that this giveaway also comes with the following Silverlight Data Visualization Controls. Below is a screenshot that list all of them: I wanted to highlight 2 of the controls that I liked the most: xamBarcode– The xamBarcode supports the following Symbologies: Below is an example of the barcode generated by Infragistics controls. This is a high resolution barcode that you will not have to wonder if your scanner can read it. As long as you have ink in your printer your barcode will read it. I used a Symbol barcode reader to test this barcode. xamTreemap– I’ve never seen a way of displaying data like this before, but I like it. You can style this anyway that you like of course and it also comes with an Office 2010 Theme. Thanks to Infragistics for providing the controls to one lucky reader. I hope that you enjoyed this post and good luck to those that entered the contest. Subscribe to my feed

Read the article

Who is Jeremiah Owyang?

- by Michael Hylton

12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Q: What’s your current role and what career path brought you here? J.O.: I'm currently a partner and one of the founding team members at Altimeter Group. I'm currently the Research Director, as well as wear the hat of Industry Analyst. Prior to joining Altimeter, I was an Industry Analyst at Forrester covering Social Computing, and before that, deployed and managed the social media program at Hitachi Data Systems in Santa Clara. Around that time, I started a career blog called Web Strategy which focused on how companies were using the web to connect with customers --and never looked back. Q: As an industry analyst, what are you focused on these days? J.O.: There are three trends that I'm focused my research on at this time: 1) The Dynamic Customer Journey: Individuals (both b2c and b2b) are given so many options in their sources of data, channels to choose from and screens to consume them on that we've found that at each given touchpoint there are 75 potential permutations. Companies that can map this, then deliver information to individuals when they need it will have a competitive advantage and we want to find out who's doing this. 2) One of the sub themes that supports this trend is Social Performance. Yesterday's social web was disparate engagement of humans, but the next phase will be data driven, and soon new technologies will emerge to help all those that are consuming, publishing, and engaging on the social web to be more efficient with their time through forms of automation. As you might expect, this comes with upsides and downsides. 3) The Sentient World is our research theme that looks out the furthest as the world around us (even inanimate objects) become 'self aware' and are able to talk back to us via digital devices and beyond. Big data, internet of things, mobile devices will all be this next set. Q: People cite that the line between work and life is getting more and more blurred. Do you see your personal life influencing your professional work? J.O.: The lines between our work and personal lives are dissolving, and this leads to a greater upside of being always connected and have deeper relationships with those that are not. It also means a downside of society expectations that we're always around and available for colleagues, customers, and beyond. In the future, a balance will be sought as we seek to achieve the goals of family, friends, work, and our own personal desires. All of this is being ironically written at 430 am on a Sunday am. Q: How can people keep up with what you’re working on? J.O.: A great question, thanks. There are a few sources of information to find out, I'll lead with the first which is my blog at web-strategist.com. A few times a week I'll publish my industry insights (hires, trends, forces, funding, M&A, business needs) as well as on twitter where I'll point to all the news that's fit to print @jowyang. As my research reports go live (we publish them for all to read --called Open Research-- at no cost) they'll emerge on my blog, or checkout the research tab to find out more now. http://www.web-strategist.com/blog/research/ Q: Recently, you’ve been working with us here at Oracle on something exciting coming up later this week. What’s on the horizon? J.O.: Absolutely! This coming Thursday, September 13th, I’m doing a webcast with Oracle on “Managing Social Relationships for the Enterprise”. This is going to be a great discussion with Reggie Bradford, Senior Vice President of Product Development at Oracle and Christian Finn, Senior Director of Product Management for Oracle WebCenter. I’m looking forward to a great discussion around all those issues that so many companies are struggling with these days as they realize how much social media is impacting their business. It’s changing the way your customers and employees interact with your brand. Today it’s no longer a matter of when to become a social-enabled enterprise, but how to become a successful one. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Q: You’ve been very actively pursued for media interviews and conference and company speaking engagements – anything you’d like to share to give us a sneak peak of what to expect on Thursday’s webcast? J.O.: Below is a 15 minute video which encapsulates Altimeter’s themes on the Dynamic Customer Journey and the Sentient World. I’m really proud to have taken an active role in the first ever LeWeb outside of Paris. This one, which was featured in downtown London across the street from Westminster Abbey was sold out. If you’ve not heard of LeWeb, this is a global Internet conference hosted by Loic and Geraldine Le Meur, a power couple that stem from Paris but are also living in Silicon Valley, this is one of my favorite conferences to connect with brands, technology innovators, investors and friends. Altimeter was able to play a minor role in suggesting the theme for the event “Faster Than Real Time” which stems off previous LeWebs that focused on the “Real time web”. In this radical state, companies are able to anticipate the needs of their customers by using data, technology, and devices and deliver meaningful experiences before customers even know they need it. I explore two of three of Altimeter’s research themes, the Dynamic Customer Journey, and the Sentient World in my speech, but due to time, did not focus on Adaptive Organization.

Read the article

Who is Jeremiah Owyang?

- by Michael Snow

12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Q: What’s your current role and what career path brought you here? J.O.: I'm currently a partner and one of the founding team members at Altimeter Group. I'm currently the Research Director, as well as wear the hat of Industry Analyst. Prior to joining Altimeter, I was an Industry Analyst at Forrester covering Social Computing, and before that, deployed and managed the social media program at Hitachi Data Systems in Santa Clara. Around that time, I started a career blog called Web Strategy which focused on how companies were using the web to connect with customers --and never looked back. Q: As an industry analyst, what are you focused on these days? J.O.: There are three trends that I'm focused my research on at this time: 1) The Dynamic Customer Journey: Individuals (both b2c and b2b) are given so many options in their sources of data, channels to choose from and screens to consume them on that we've found that at each given touchpoint there are 75 potential permutations. Companies that can map this, then deliver information to individuals when they need it will have a competitive advantage and we want to find out who's doing this. 2) One of the sub themes that supports this trend is Social Performance. Yesterday's social web was disparate engagement of humans, but the next phase will be data driven, and soon new technologies will emerge to help all those that are consuming, publishing, and engaging on the social web to be more efficient with their time through forms of automation. As you might expect, this comes with upsides and downsides. 3) The Sentient World is our research theme that looks out the furthest as the world around us (even inanimate objects) become 'self aware' and are able to talk back to us via digital devices and beyond. Big data, internet of things, mobile devices will all be this next set. Q: People cite that the line between work and life is getting more and more blurred. Do you see your personal life influencing your professional work? J.O.: The lines between our work and personal lives are dissolving, and this leads to a greater upside of being always connected and have deeper relationships with those that are not. It also means a downside of society expectations that we're always around and available for colleagues, customers, and beyond. In the future, a balance will be sought as we seek to achieve the goals of family, friends, work, and our own personal desires. All of this is being ironically written at 430 am on a Sunday am. Q: How can people keep up with what you’re working on? J.O.: A great question, thanks. There are a few sources of information to find out, I'll lead with the first which is my blog at web-strategist.com. A few times a week I'll publish my industry insights (hires, trends, forces, funding, M&A, business needs) as well as on twitter where I'll point to all the news that's fit to print @jowyang. As my research reports go live (we publish them for all to read --called Open Research-- at no cost) they'll emerge on my blog, or checkout the research tab to find out more now. http://www.web-strategist.com/blog/research/ Q: Recently, you’ve been working with us here at Oracle on something exciting coming up later this week. What’s on the horizon? J.O.: Absolutely! This coming Thursday, September 13th, I’m doing a webcast with Oracle on “Managing Social Relationships for the Enterprise”. This is going to be a great discussion with Reggie Bradford, Senior Vice President of Product Development at Oracle and Christian Finn, Senior Director of Product Management for Oracle WebCenter. I’m looking forward to a great discussion around all those issues that so many companies are struggling with these days as they realize how much social media is impacting their business. It’s changing the way your customers and employees interact with your brand. Today it’s no longer a matter of when to become a social-enabled enterprise, but how to become a successful one. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Q: You’ve been very actively pursued for media interviews and conference and company speaking engagements – anything you’d like to share to give us a sneak peak of what to expect on Thursday’s webcast? J.O.: Below is a 15 minute video which encapsulates Altimeter’s themes on the Dynamic Customer Journey and the Sentient World. I’m really proud to have taken an active role in the first ever LeWeb outside of Paris. This one, which was featured in downtown London across the street from Westminster Abbey was sold out. If you’ve not heard of LeWeb, this is a global Internet conference hosted by Loic and Geraldine Le Meur, a power couple that stem from Paris but are also living in Silicon Valley, this is one of my favorite conferences to connect with brands, technology innovators, investors and friends. Altimeter was able to play a minor role in suggesting the theme for the event “Faster Than Real Time” which stems off previous LeWebs that focused on the “Real time web”. In this radical state, companies are able to anticipate the needs of their customers by using data, technology, and devices and deliver meaningful experiences before customers even know they need it. I explore two of three of Altimeter’s research themes, the Dynamic Customer Journey, and the Sentient World in my speech, but due to time, did not focus on Adaptive Organization.

Read the article

cannot connect with huawei e173 after upgrade to 12.10 using network manager

- by user104195

Since upgrade from 12.04 to 12.10 I can't connect to internet using mobile broadband modem Huawei e173. It worked earlier without problems and now it seems to be properly recognized (at least its connections appear in network manager applet), and after selecting connection manually it starts connection procedure. After about 20 seconds it returns to state disconnected. After browsing internet I've found that running network manager with: NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon After inserting modem I get: NetworkManager[507]: <warn> (ttyUSB2): failed to look up interface index NetworkManager[507]: <info> (ttyUSB2): new GSM/UMTS device (driver: 'option1' ifindex: 0) NetworkManager[507]: <info> (ttyUSB2): exported as /org/freedesktop/NetworkManager/Devices/2 NetworkManager[507]: <info> (ttyUSB2): now managed NetworkManager[507]: <info> (ttyUSB2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'managed') [2] NetworkManager[507]: <info> (ttyUSB2): device state change: unavailable -> disconnected (reason 'none') [20 30 0] where 'failed to look up interface index' seems to be suspicious. After starting connecting: NetworkManager[507]: <info> Activation (ttyUSB2) starting connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> (ttyUSB2): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> need-auth (reason 'none') [40 60 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: need-auth -> prepare (reason 'none') [60 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> WWAN now enabled by management service NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) starting... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) successful. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) started... NetworkManager[507]: <info> (ttyUSB2): device state change: config -> ip-config (reason 'none') [50 70 0] NetworkManager[507]: <info> starting PPP connection NetworkManager[507]: <info> pppd started with pid 663 NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) started... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded. ** Message: nm-ppp-plugin: (plugin_init): initializing ** Message: nm-ppp-plugin: (nm_phasechange): status 3 / phase 'serial connection' Removed stale lock on ttyUSB2 (pid 32146) using channel 23 NetworkManager[507]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) NetworkManager[507]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. NetworkManager[507]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring... Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB2 ** Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish' sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] NetworkManager[507]: <warn> pppd timed out or didn't initialize our dbus module NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) started... NetworkManager[507]: <info> (ttyUSB2): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5] NetworkManager[507]: <warn> Activation (ttyUSB2) failed for connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) complete. NetworkManager[507]: <info> (ttyUSB2): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'none') [0] Terminating on signal 15 ** Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate' sent [LCP TermReq id=0x2 "User request"] NetworkManager[507]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) where repeated: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] last for about 20 seconds. I've tried to downgrade network manager but failed due to many dependencies. Can anyone point me to solution or tell what should I do to further investigate the problem?

Read the article

CodePlex Daily Summary for Monday, May 31, 2010

CodePlex Daily Summary for Monday, May 31, 2010New ProjectsAndrew's XNA Helpers: A collection of simple, yet useful methods and ways of accessing crucial variables such as the ContentManager or SpriteBatch from anywhere in your ...BASIC-DOS: BASIC-DOS OS Makes It Easier For People To Use DOS As It Comes With An Graphical User Interface That Loads Up During Boot Up. No Need To Type Any C...Chirpy - Visual Studio Add In For Handling Js, Css, and DotLess Files: Mashes, minifies, and validates your javascript, stylesheet, and dotless files.fprparser: Fortify XML Report parser in the form of an Excel Add-inHL7ToXmlConverter: Class library to transform HL7 Version 2.x to HL7Xml Version 2 depends on the used HL7 grammar.imdb movie downloader: basically download info from imdb and it s realy FAST ! need some development about thread pooling and webclient issues.. just try ;) for it run ...IMIfmoOptimisation: Задание по оптимизацииMarketView: MarketViewMediaStreamSources: 这是 CodePlex 上第一个可以呈现视频的 MediaStreamSource 项目。Migrate User Profile Values: A tool to move values between SharePoint 2007 User Profiles. The console application MigrateUserProfileValues.exe will export User Profile values ...Nexus6Studio Development Space: This is a working repository for development efforst of the Nexus6studio team.Project BlueLabel: BlueLabelSergioTools: SergioTools is a collection of tools and sample codes to help C# developers to improve your productivity and skills.SharePoint Property Bag Settings 2010: The Property Bag Settings can store any metadata as Key-Value pairs such as connection strings, server names, file paths, and other miscellaneous s...Silverlight Isolated Storage Cache: IsoCache is a small framework the make it easy to store dll's and xap files in the isolated storage so they can be use to speed up the startup of t...StackPivot: StackPivot is an app which can generate Microsoft Pivot "Collections" on-the-fly based on the data collected from the Stack Exchange APIs. Its d...Suspension Calculator: The Suspension Calculator aims to help people who are building race cars perform suspension related calculations. The calculations vary from motion...TFS Timesheets: A custom work item control for Team Foundation Server that allows timesheet data to be captured against a work item.Umbraco Membership infrastructure: Improvements to the Umbraco membership API implemented as a package. Includes user properties and improved membership API support.VolgaTransTelecomClient: VolgaTransTelecomClient makes it easier for clients of "Volga TransTelecom" company to get info about account. It's developed in C#.Wouter's SharePoint Demo Land: This site contains many of the SharePoint demos that I create while training or hobbying, both for the 2007 and the 2010 release. Please click the...New ReleasesAgUnit - Silverlight unit testing with ReSharper: AgUnit 0.1: Initial release of AgUnit. Copy the extracted files from AgUnit-0.1-ReSharper5.0.zip into the "Bin\Plugins\" folder of your ReSharper installatio...Andrew's XNA Helpers: Andrew's XNA Helpers v1: My first version of my Library of XNA Helpers. Includes: Variables class - A static class that can be accessed anywhere throughout your project -...Clean your Database: Database Cleaner Setup: Database Cleaner SetupClean your Database: Database Cleaner Source: Database Cleaner Source codeCommunity Forums NNTP bridge: Community Forums NNTP Bridge V16: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...Community Forums NNTP bridge: Community Forums NNTP Bridge V17: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release is prim...Folder Bookmarks: Folder Bookmarks 1.5.8: The latest version of Folder Bookmarks (1.5.8), with new GUI improvements and 'Help' feature - all the instructions needed to use the software (If ...HL7ToXmlConverter: HL7ToXmlConverter Version 0.0.0.9: First distribution on codepleximdb movie downloader: 0.9 Fist Tryout of MyImdb SourceCode: Fist Tryout of MyImdb SourceCodeLightweight Fluent Workflow: Objectflow 1.0.0.2: The features of this release take advantage of .Net 3.5 featrures; Lamda support is back for Constraints and Functions can now be used in workflows...MDownloader: MDownloader-0.15.16.59384: Fixed password detector in context of .rar files. Fixed FileFactory provider implementation. Fixed detection of internet connection failures.MediaStreamSources: MediaStreamSources 1.0 Beta1: 1.0 Beta1Mongodb Management Studio: Mongodb Management Studio v1.1: MongodbManagementStudio v1.1 1.服务器管理功能添加服务器,删除服务器 2.服务器,数据库,表,列,索引,树形显示和状态信息查看 3.查询分析器功能. 支持select,insert,Delete,update 支持自定义分页函数 $rowid(1,5) 查询...Multiplayer Quiz: Release 1_7_1_0: Latest Release. .NET 4.0 required to run server, and recommended for client. Download: http://www.microsoft.com/downloads/details.aspx?FamilyID=9cf...SCSM PowerShell Cmdlets: SCSM PowerShell Cmdlets Version 0.1.1: First release! This is a minimal build with limited funcitonallity. Should be handled as a preview of what's to come. Included Cmdlets are: New-...SharePoint Property Bag Settings 2010: PropertyBagSettings2010.wsp: The SharePoint Property Bag Settings is a reusable component that you can include in your own SharePoint applications. It can store simple types, s...Sharp Tests Ex: Sharp Tests Ex 1.0.0RTM: Project Description #TestsEx (Sharp Tests Extensions) is a set of extensible extensions. The main target is write short assertions where the Visual...Silverlight Testing Automation Tool: StatLight V1.1: FeaturesApplied some UnitDriven specific changes from justncase80/StatLight Updated to the 0.0.5 release over on rul:UnitDriven.codeplex.com Upda...SQL Server 2005 and 2008 - Backup, Integrity Check and Index Optimization: 30 May 2010: This is the latest version of my solution for Backup, Integrity Check and Index Optimization in SQL Server 2005, SQL Server 2008 and SQL Server 200...Suspension Calculator: SuspensionCalculator_V1.0.0.29: The Suspension Calculator aims to help people who are building race cars perform suspension related calculations. The calculations vary from motion...Svn2Svn: copy, sync, replay or reflect changes across SVN repositories: 1.2 (Beta): Build 1.2.8932.0. Added /incremental (/i) mode, svn2svn detects all previously synced revisions and starts at the latest revision that has not bee...VCC: Latest build, v2.1.30530.0: Automatic drop of latest buildVolgaTransTelecomClient: V.1.0.2.0: v.1.0.2.0 releaseWatchersNET.SkinObjects.ModulActionsMenu: ModulActionsMenu 01.00.01: changes CSS Fixed for the Microsoft Internet ExplorerWouter's SharePoint Demo Land: Navigation Service Basic: This sample shows how to create a simple Service Application for SharePoint 2010. You can read up on the how and why on my blog series about Serv...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active ProjectsCommunity Forums NNTP bridgeAStar.netpatterns & practices – Enterprise LibraryBlogEngine.NETGMap.NET - Great Maps for Windows Forms & PresentationMirror Testing SystemIonics Isapi Rewrite FilterCustomer Portal Accelerator for Microsoft Dynamics CRMN2 CMSpatterns & practices: Windows Azure Security Guidance

Read the article

Are Chromebooks the New Netbooks, and What Does That Mean?

- by Chris Hoffman

Netbooks — small, cheap, slow laptops — were once very popular. They fell out of favor — people bought them because they seemed cheap and portable, but the actual experience was lackluster. Most netbooks now sit unused. Windows netbooks have vanished from stores today, but there’s a new super-cheap laptop — the Chromebook. Chromebook sales numbers are impressive, but their usage statistics tell a different story. Are Chromebooks just the new netbook? The Problem With Netbooks Netbooks seemed appealing, especially in an age before tablets and lightweight ultrabooks. You could buy a netbook for $200 or so and have a portable device that let you get on the Internet. The name “netbook” spelled that out — it was a portable device for getting on the ‘net. They weren’t really that great. The original netbook was a lightweight Asus Eee PC that ran Linux alone and had a small amount of fast flash storage. Netbooks eventually ran heavier Windows XP operating systems — Windows Vista was out, but it was just too bloated to run on netbooks. Manufacturers added slow magnetic hard drives, bloatware, and even DVD drives! They couldn’t run most Windows software very well. The build quality was poor and their keyboards were tiny and cramped. People liked the idea of a lightweight device that let them get on the Internet and loved the cheap price, but the actual experience wasn’t great. Chromebook Sales Chromebook sales numbers seem surprisingly high. NPD reported that Chromebooks were 21% of all notebooks sold in the US in 2013. If you combine laptop and tablet sales into a single statistic, Chromebooks were 9.6% of all those devices sold. That’s 2/3 as many Chromebooks sold as iPads in the US! Of Amazon’s best-selling laptop computers, two of the top three are Chromebooks. These definitely look like successful products. Unlike netbooks, Chromebooks are taking off in a big way in the education market. Many schools are buying Chromebooks for their students instead of more expensive Windows laptops. They’re easier to manage and lock down than Windows laptops, but — more importantly for cash-strapped schools — they’re very cheap. Netbooks never had this sort of momentum in schools. Chromebook Usage Statistics Here’s where the rosy picture of Chromebooks starts to become more realistic. StatCounter’s browser usage statistics show how widely used different operating systems are. For example, Windows 7 has the highest share with 35.71% of web activity in April, 2014. The chart doesn’t even show Chrome OS at all, although there is an “Other” number near the bottom. Click the Download Data link to download a CSV file and we can view more detailed information. Chrome OS only accounted for 0.38% of web usage in April, 2014. Desktop Linux, which people often shrug at, accounted for 1.52% in the same month. To its credit, Chrome OS usage has increased. Chromebooks were widely mocked back in November, 2013 when the sales numbers came out. After all, they only accounted for 0.11% of web usage globally in November, 2013! But Chrome OS numbers have been improving: Nov, 2013: 0.11% Dec, 2013: 0.22% Jan, 2014: 0.31% Feb, 2014: 0.35% Mar, 2014: 0.36% Apr, 2014: 0.38% Chrome OS is climbing, but it’s definitely still in the “Other” category. It isn’t as high as we’d expect to see it with those types of sales numbers. Chromebooks vs. Netbooks Chromebooks are more limited devices than traditional PCs. You can do quite a few things, but you have to do it all using Chrome or Chrome apps. Most people won’t be enabling developer mode and installing a Linux desktop. You don’t have access to the powerful desktop software available for Windows and even Mac OS X. On the other hand, these Chromebooks are less compromised than netbooks in many ways. They come with a lightweight operating system designed for portable, mobile devices. They don’t come packed with any bloatware, like the bloatware you’ll find on competing Windows PCs and the original netbooks. They’re cheaper because the manufacturer doesn’t have to pay for a Windows license. There’s no need for antivirus software weighing the operating system down. They’re larger than the original netbooks, with many of them being 11.6-inches instead of the original 8-inch bodies many older netbooks came with. They have larger, more comfortable keyboards and fast solid-state storage. Really, Chromebooks are what netbooks wanted to be. People didn’t buy netbooks to use typical Windows software — they just wanted a lightweight PC. Of course, for many people, the real successor to netbooks is tablets. If all you want is a portable device to throw in a bag so you can get online, maybe a tablet is better. Where Does This Leave Chromebooks? So, are Chromebooks the new netbooks? It’s a bit early to answer that question. Chromebooks are definitely not out of the competition — their sales look good and their usage share is increasing. On the other hand, Chrome OS is still pretty far behind. They’re not catching fire like tablets did. Maybe netbooks were just before their time and Chromebooks were what they were always meant to be. Just as Microsoft’s Windows XP tablets failed, Windows XP netbooks also failed. Tablets took off with a more refined operating system on better hardware years later. “Netbooks” — or Chromebooks — are now taking off with a more purpose-built operating system on better hardware, too. It’s hard to count Chromebooks out because they provide a much better experience than netbooks ever did. If you’re one of the people who wants to use old Windows desktop apps on your portable laptop, you may think netbooks were better — but most people don’t want that. But maybe people either want a full desktop PC experience or a full mobile tablet experience. Is there a place for a laptop with a keyboard that can only view websites? We’ll have to wait and see. Image Credit: Kevin Jarret on Flickr, Clive Darra on Flickr, Sean Freese on Flickr

Read the article

Connect to running web role on Azure using Remote Desktop Connection and VS2012

- by Magnus Karlsson

We want to be able to collect IntelliTrace information from our running app and also use remote desktop to connect to the IIS and look around(probably debugging). 1. Create certificate 1.1 Right-click the cloud project (marked in red) and select “Configure remote desktop”. 1.2 In the drop down list of certificates, choose <create> at the bottom. 1.3. Follow the instructions, you can set it up with default values. 1.4 When done. Choose the certificate and click “Copy to File…” as seen in the left of the picture above. 1.5. Save the file with any name you want. Now we will save it to local storage to be able to import it to our solution through the azure configuration manager in step 3. 2. Save certificate to local storage Now we need to attach it to our local certificate storage to be able to reach it from our confiuguration manager in visual studio. Microsoft provides the following steps for doing this: http://support.microsoft.com/kb/232137 In order to view the Certificates store on the local computer, perform the following steps: Click Start, and then click Run. Type "MMC.EXE" (without the quotation marks) and click OK. Click Console in the new MMC you created, and then click Add/Remove Snap-in. In the new window, click Add. Highlight the Certificates snap-in, and then click Add. Choose the Computer option and click Next. Select Local Computer on the next screen, and then click OK. Click Close , and then click OK. You have now added the Certificates snap-in, which will allow you to work with any certificates in your computer's certificate store. You may want to save this MMC for later use. Now that you have access to the Certificates snap-in, you can import the server certificate into you computer's certificate store by following these steps: Open the Certificates (Local Computer) snap-in and navigate to Personal, and then Certificates. Note: Certificates may not be listed. If it is not, that is because there are no certificates installed. Right-click Certificates (or Personal if that option does not exist.) Choose All Tasks, and then click Import. When the wizard starts, click Next. Browse to the PFX file you created containing your server certificate and private key. Click Next. Enter the password you gave the PFX file when you created it. Be sure the Mark the key as exportable option is selected if you want to be able to export the key pair again from this computer. As an added security measure, you may want to leave this option unchecked to ensure that no one can make a backup of your private key. Click Next, and then choose the Certificate Store you want to save the certificate to. You should select Personal because it is a Web server certificate. If you included the certificates in the certification hierarchy, it will also be added to this store. Click Next. You should see a summary of screen showing what the wizard is about to do. If this information is correct, click Finish. You will now see the server certificate for your Web server in the list of Personal Certificates. It will be denoted by the common name of the server (found in the subject section of the certificate). Now that you have the certificate backup imported into the certificate store, you can enable Internet Information Services 5.0 to use that certificate (and the corresponding private key). To do this, perform the following steps: Open the Internet Services Manager (under Administrative Tools) and navigate to the Web site you want to enable secure communications (SSL/TLS) on. Right-click on the site and click Properties. You should now see the properties screen for the Web site. Click the Directory Security tab. Under the Secure Communications section, click Server Certificate. This will start the Web Site Certificate Wizard. Click Next. Choose the Assign an existing certificate option and click Next. You will now see a screen showing that contents of your computer's personal certificate store. Highlight your Web server certificate (denoted by the common name), and then click Next. You will now see a summary screen showing you all the details about the certificate you are installing. Be sure that this information is correct or you may have problems using SSL or TLS in HTTP communications. Click Next, and then click OK to exit the wizard. You should now have an SSL/TLS-enabled Web server. Be sure to protect your PFX files from any unwanted personnel. Image of a typical MMC.EXE with the certificates up. 3. Import the certificate to you visual studio project. 3.1 Now right click your equivalent to the MvcWebRole1 (as seen in the first picture under the red oval) and choose properties. 3.2 Choose Certificates. Right click the ellipsis to the right of the “thumbprint” and you should be able to select your newly created certificate here. After selecting it- save the file. 4. Upload the certificate to your Azure subscription. 4.1 Go to the azure management portal, click the services menu icon to the left and choose the service. Click Upload in the bottom menu. 5. Connect to server. Since I tried to use account settings(have to use another name) we have to set up a new name for the connection. No biggie. 5.1 Go to azure management portal, select your service and in the bottom menu, choose “REMOTE”. This will display the configuration for remote connection. It will actually change your ServiceConfiguration.cscfg file. After you change It here it might be good to choose download and replace the one in your project. Set a name that is not your windows azure account name and not Administrator. 5.2 Goto visual studio, click Server Explorer. Choose as selected in the picture below and click “COnnect using remote desktop”. 5.2 You will now be able to log in with the name and password set up in step 5.1. and voila! Windows server 2012, IIS and other nice stuff! To do this one I’ve been using http://msdn.microsoft.com/en-us/library/windowsazure/ff683671.aspx where you can collect some of this information and additional one.

Read the article

External File Upload Optimizations for Windows Azure

- by rgillen

[Cross posted from here: http://rob.gillenfamily.net/post/External-File-Upload-Optimizations-for-Windows-Azure.aspx] I’m wrapping up a bit of the work we’ve been doing on data movement optimizations for cloud computing and the latest set of data yielded some interesting points I thought I’d share. The work done here is not really rocket science but may, in some ways, be slightly counter-intuitive and therefore seemed worthy of posting. Summary: for those who don’t like to read detailed posts or don’t have time, the synopsis is that if you are uploading data to Azure, block your data (even down to 1MB) and upload in parallel. Set your block size based on your source file size, but if you must choose a fixed value, use 1MB. Following the above will result in significant performance gains… upwards of 10x-24x and a reduction in overall file transfer time of upwards of 90% (eg, uploading a 1GB file averaged 46.37 minutes prior to optimizations and averaged 1.86 minutes afterwards). Detail: For those of you who want more detail, or think that the claims at the end of the preceding paragraph are over-reaching, what follows is information and code supporting these claims. As the title would indicate, these tests were run from our research facility pointing to the Azure cloud (specifically US North Central as it is physically closest to us) and do not represent intra-cloud results… we have performed intra-cloud tests and the overall results are similar in notion but the data rates are significantly different as well as the tipping points for the various block sizes… this will be detailed separately). We started by building a very simple console application that would loop through a directory and upload each file to Azure storage. This application used the shipping storage client library from the 1.1 version of the azure tools. The only real variation from the client library is that we added code to collect and record the duration (in ms) and size (in bytes) for each file transferred. The code is available here. We then created a directory that had a collection of files for the following sizes: 2KB, 32KB, 64KB, 128KB, 512KB, 1MB, 5MB, 10MB, 25MB, 50MB, 100MB, 250MB, 500MB, 750MB, and 1GB (50 files for each size listed). These files contained randomly-generated binary data and do not benefit from compression (a separate discussion topic). Our file generation tool is available here. The baseline was established by running the application described above against the directory containing all of the data files. This application uploads the files in a random order so as to avoid transferring all of the files of a given size sequentially and thereby spreading the affects of periodic Internet delays across the collection of results. We then ran some scripts to split the resulting data and generate some reports. The raw data collected for our non-optimized tests is available via the links in the Related Resources section at the bottom of this post. For each file size, we calculated the average upload time (and standard deviation) and the average transfer rate (and standard deviation). As you likely are aware, transferring data across the Internet is susceptible to many transient delays which can cause anomalies in the resulting data. It is for this reason that we randomized the order of source file processing as well as executed the tests 50x for each file size. We expect that these steps will yield a sufficiently balanced set of results. Once the baseline was collected and analyzed, we updated the test harness application with some methods to split the source file into user-defined block sizes and then to upload those blocks in parallel (using the PutBlock() method of Azure storage). The parallelization was handled by simply relying on the Parallel Extensions to .NET to provide a Parallel.For loop (see linked source for specific implementation details in Program.cs, line 173 and following… less than 100 lines total). Once all of the blocks were uploaded, we called PutBlockList() to assemble/commit the file in Azure storage. For each block transferred, the MD5 was calculated and sent ensuring that the bits that arrived matched was was intended. The timer for the blocked/parallelized transfer method wraps the entire process (source file splitting, block transfer, MD5 validation, file committal). A diagram of the process is as follows: We then tested the affects of blocking & parallelizing the transfers by running the updated application against the same source set and did a parameter sweep on the block size including 256KB, 512KB, 1MB, 2MB, and 4MB (our assumption was that anything lower than 256KB wasn’t worth the trouble and 4MB is the maximum size of a block supported by Azure). The raw data for the parallel tests is available via the links in the Related Resources section at the bottom of this post. This data was processed and then compared against the single-threaded / non-optimized transfer numbers and the results were encouraging. The Excel version of the results is available here. Two semi-obvious points need to be made prior to reviewing the data. The first is that if the block size is larger than the source file size you will end up with a “negative optimization” due to the overhead of attempting to block and parallelize. The second is that as the files get smaller, the clock-time cost of blocking and parallelizing (overhead) is more apparent and can tend towards negative optimizations. For this reason (and is supported in the raw data provided in the linked worksheet) the charts and dialog below ignore source file sizes less than 1MB. (click chart for full size image) The chart above illustrates some interesting points about the results: When the block size is smaller than the source file, performance increases but as the block size approaches and then passes the source file size, you see decreasing benefit to the point of negative gains (see the values for the 1MB file size) For some of the moderately-sized source files, small blocks (256KB) are best As the size of the source file gets larger (see values for 50MB and up), the smallest block size is not the most efficient (presumably due, at least in part, to the increased number of blocks, increased number of individual transfer requests, and reassembly/committal costs). Once you pass the 250MB source file size, the difference in rate for 1MB to 4MB blocks is more-or-less constant The 1MB block size gives the best average improvement (~16x) but the optimal approach would be to vary the block size based on the size of the source file. (click chart for full size image) The above is another view of the same data as the prior chart just with the axis changed (x-axis represents file size and plotted data shows improvement by block size). It again highlights the fact that the 1MB block size is probably the best overall size but highlights the benefits of some of the other block sizes at different source file sizes. This last chart shows the change in total duration of the file uploads based on different block sizes for the source file sizes. Nothing really new here other than this view of the data highlights the negative affects of poorly choosing a block size for smaller files. Summary What we have found so far is that blocking your file uploads and uploading them in parallel results in significant performance improvements. Further, utilizing extension methods and the Task Parallel Library (.NET 4.0) make short work of altering the shipping client library to provide this functionality while minimizing the amount of change to existing applications that might be using the client library for other interactions. Related Resources Source code for upload test application Source code for random file generator ODatas feed of raw data from non-optimized transfer tests Experiment Metadata Experiment Datasets 2KB Uploads 32KB Uploads 64KB Uploads 128KB Uploads 256KB Uploads 512KB Uploads 1MB Uploads 5MB Uploads 10MB Uploads 25MB Uploads 50MB Uploads 100MB Uploads 250MB Uploads 500MB Uploads 750MB Uploads 1GB Uploads Raw Data OData feeds of raw data from blocked/parallelized transfer tests Experiment Metadata Experiment Datasets Raw Data 256KB Blocks 512KB Blocks 1MB Blocks 2MB Blocks 4MB Blocks Excel worksheet showing summarizations and comparisons

Read the article

HTG Explains: Why Does Rebooting a Computer Fix So Many Problems?

- by Chris Hoffman

Ask a geek how to fix a problem you’ve having with your Windows computer and they’ll likely ask “Have you tried rebooting it?” This seems like a flippant response, but rebooting a computer can actually solve many problems. So what’s going on here? Why does resetting a device or restarting a program fix so many problems? And why don’t geeks try to identify and fix problems rather than use the blunt hammer of “reset it”? This Isn’t Just About Windows Bear in mind that this soltion isn’t just limited to Windows computers, but applies to all types of computing devices. You’ll find the advice “try resetting it” applied to wireless routers, iPads, Android phones, and more. This same advice even applies to software — is Firefox acting slow and consuming a lot of memory? Try closing it and reopening it! Some Problems Require a Restart To illustrate why rebooting can fix so many problems, let’s take a look at the ultimate software problem a Windows computer can face: Windows halts, showing a blue screen of death. The blue screen was caused by a low-level error, likely a problem with a hardware driver or a hardware malfunction. Windows reaches a state where it doesn’t know how to recover, so it halts, shows a blue-screen of death, gathers information about the problem, and automatically restarts the computer for you . This restart fixes the blue screen of death. Windows has gotten better at dealing with errors — for example, if your graphics driver crashes, Windows XP would have frozen. In Windows Vista and newer versions of Windows, the Windows desktop will lose its fancy graphical effects for a few moments before regaining them. Behind the scenes, Windows is restarting the malfunctioning graphics driver. But why doesn’t Windows simply fix the problem rather than restarting the driver or the computer itself? Well, because it can’t — the code has encountered a problem and stopped working completely, so there’s no way for it to continue. By restarting, the code can start from square one and hopefully it won’t encounter the same problem again. Examples of Restarting Fixing Problems While certain problems require a complete restart because the operating system or a hardware driver has stopped working, not every problem does. Some problems may be fixable without a restart, though a restart may be the easiest option. Windows is Slow: Let’s say Windows is running very slowly. It’s possible that a misbehaving program is using 99% CPU and draining the computer’s resources. A geek could head to the task manager and look around, hoping to locate the misbehaving process an end it. If an average user encountered this same problem, they could simply reboot their computer to fix it rather than dig through their running processes. Firefox or Another Program is Using Too Much Memory: In the past, Firefox has been the poster child for memory leaks on average PCs. Over time, Firefox would often consume more and more memory, getting larger and larger and slowing down. Closing Firefox will cause it to relinquish all of its memory. When it starts again, it will start from a clean state without any leaked memory. This doesn’t just apply to Firefox, but applies to any software with memory leaks. Internet or Wi-Fi Network Problems: If you have a problem with your Wi-Fi or Internet connection, the software on your router or modem may have encountered a problem. Resetting the router — just by unplugging it from its power socket and then plugging it back in — is a common solution for connection problems. In all cases, a restart wipes away the current state of the software . Any code that’s stuck in a misbehaving state will be swept away, too. When you restart, the computer or device will bring the system up from scratch, restarting all the software from square one so it will work just as well as it was working before. “Soft Resets” vs. “Hard Resets” In the mobile device world, there are two types of “resets” you can perform. A “soft reset” is simply restarting a device normally — turning it off and then on again. A “hard reset” is resetting its software state back to its factory default state. When you think about it, both types of resets fix problems for a similar reason. For example, let’s say your Windows computer refuses to boot or becomes completely infected with malware. Simply restarting the computer won’t fix the problem, as the problem is with the files on the computer’s hard drive — it has corrupted files or malware that loads at startup on its hard drive. However, reinstalling Windows (performing a “Refresh or Reset your PC” operation in Windows 8 terms) will wipe away everything on the computer’s hard drive, restoring it to its formerly clean state. This is simpler than looking through the computer’s hard drive, trying to identify the exact reason for the problems or trying to ensure you’ve obliterated every last trace of malware. It’s much faster to simply start over from a known-good, clean state instead of trying to locate every possible problem and fix it. Ultimately, the answer is that “resetting a computer wipes away the current state of the software, including any problems that have developed, and allows it to start over from square one.” It’s easier and faster to start from a clean state than identify and fix any problems that may be occurring — in fact, in some cases, it may be impossible to fix problems without beginning from that clean state. Image Credit: Arria Belli on Flickr, DeclanTM on Flickr

Read the article

Can Google Employees See My Saved Google Chrome Passwords?

- by Jason Fitzpatrick

Storing your passwords in your web browser seems like a great time saver, but are the passwords secure and inaccessible to others (even employees of the browser company) when squirreled away? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader MMA is curious if Google employees have (or could have) access to the passwords he stores in Google Chrome: I understand that we are really tempted to save our passwords in Google Chrome. The likely benefit is two fold, You don’t need to (memorize and) input those long and cryptic passwords. These are available wherever you are once you log in to your Google account. The last point sparked my doubt. Since the password is available anywhere, the storage must in some central location, and this should be at Google. Now, my simple question is, can a Google employee see my passwords? Searching over the Internet revealed several articles/messages. Do you save passwords in Chrome? Maybe you should reconsider: Talks about your passwords being stolen by someone who has access to your computer account. Nothing mentioned about the central storage security and vulnerability. There is even a response from Chrome browser security tech lead about the first issue. Chrome’s insane password security strategy: Mostly along the same line. You can steal password from somebody if you have access to the computer account. How to Steal Passwords Saved in Google Chrome in 5 Simple Steps: Teaches you how to actually perform the act mentioned in the previous two when you have access to somebody else’s account. There are many more (including this one at this site), mostly along the same line, points, counter-points, huge debates. I refrain from mentioning them here, simply carry a search if you want to find them. Coming back to my original query, can a Google employee see my password? Since I can view the password using a simple button, definitely they can be unhashed (decrypted) even if encrypted. This is very different from the passwords saved in Unix-like OS’s where the saved password can never be seen in plain text. They use a one-way encryption algorithm to encrypt your passwords. This encrypted password is then stored in the passwd or shadow file. When you attempt to login, the password you type in is encrypted again and compared with the entry in the file that stores your passwords. If they match, it must be the same password, and you are allowed access. Thus, a superuser can change my password, can block my account, but he can never see my password. So are his concerns well founded or will a little insight dispel his worry? The Answer SuperUser contributor Zeel helps put his mind at ease: Short answer: No* Passwords stored on your local machine can be decrypted by Chrome, as long as your OS user account is logged in. And then you can view those in plain text. At first this seems horrible, but how did you think auto-fill worked? When that password field gets filled in, Chrome must insert the real password into the HTML form element – or else the page wouldn’t work right, and you could not submit the form. And if the connection to the website is not over HTTPS, the plain text is then sent over the internet. In other words, if chrome can’t get the plain text passwords, then they are totally useless. A one way hash is no good, because we need to use them. Now the passwords are in fact encrypted, the only way to get them back to plain text is to have the decryption key. That key is your Google password, or a secondary key you can set up. When you sign into Chrome and sync the Google servers will transmit the encrypted passwords, settings, bookmarks, auto-fill, etc, to your local machine. Here Chrome will decrypt the information and be able to use it. On Google’s end all that info is stored in its encrpyted state, and they do not have the key to decrypt it. Your account password is checked against a hash to log in to Google, and even if you let chrome remember it, that encrypted version is hidden in the same bundle as the other passwords, impossible to access. So an employee could probably grab a dump of the encrypted data, but it wouldn’t do them any good, since they would have no way to use it.* So no, Google employees can not** access your passwords, since they are encrypted on their servers. * However, do not forget that any system that can be accessed by an authorized user can be accessed by an unauthorized user. Some systems are easier to break than other, but none are fail-proof. . . That being said, I think I will trust Google and the millions they spend on security systems, over any other password storage solution. And heck, I’m a wimpy nerd, it would be easier to beat the passwords out of me than break Google’s encryption. ** I am also assuming that there isn’t a person who just happens to work for Google gaining access to your local machine. In that case you are screwed, but employment at Google isn’t actually a factor any more. Moral: Hit Win + L before leaving machine. While we agree with zeel that it’s a pretty safe bet (as long as your computer is not compromised) that your passwords are in fact safe while stored in Chrome, we prefer to encrypt all our logins and passwords in a LastPass vault. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.

Read the article

PASS: The Budget Process

- by Bill Graziano

Every fiscal year PASS creates a detailed budget. This helps us set priorities and communicate to our members what we’re going to do in the upcoming year. You can review the current budget on the PASS Governance page. That page currently requires you to login but I’m talking with HQ to see if there are any legal issues with opening that up. The Accounting Team The PASS accounting team is two people. The Executive Vice-President of Finance (“EVP”) and the PASS Accounting Manager. Sandy Cherry is the accounting manager and works at PASS HQ. Sandy has been with PASS since we switched management companies in 2007. Throughout this document when I talk about any actual work related to the budget that’s all Sandy :) She’s the glue that gets us through this process. Last year we went through 32 iterations of the budget before the Board approved so it’s a pretty busy time for her us – well, mostly her. Fiscal Year The PASS fiscal year runs from July 1st through June 30th the following year. Right now we’re in fiscal year 2011. Our 2010 Summit actually occurred in FY2011. We switched to this schedule from a calendar year in 2006. Our goal was to have the Summit occur early in our fiscal year. That gives us the rest of the year to handle any significant financial impact from the Summit. If registrations are down we can reduce spending. If registrations are up we can decide how much to increase our reserves and how much to spend. Keep in mind that the Summit is budgeted to generate 82% of our revenue this year. How it performs has a significant impact on our financials. The other benefit of this fiscal year is that it matches the Microsoft fiscal year. We sign an annual sponsorship agreement with Microsoft and it’s very helpful that our fiscal years match. This year our budget process will probably start in earnest in March or April. I’d like to be done in early June so we can publish before July 1st. I was late publishing it this year and I’m trying not to repeat that. Our Budget Our actual budget is an Excel spreadsheet with 36 sheets. We remove some of those when we publish it since they include salary information. The budget is broken up into various portfolios or departments. We have 20 portfolios. They include chapters, marketing, virtual chapters, marketing, etc. Ideally each portfolio is assigned to a Board member. Each portfolio also typically has a staff person assigned to it. Portfolios that aren’t assigned to a Board member are monitored by HQ and the ExecVP-Finance (me). These are typically smaller portfolios such as deferred membership or Summit futures. (More on those in a later post.) All portfolios are reviewed by all Board members during the budget approval process, when interim financials are released internally and at year-end. The Process Our first step is to budget revenues. The Board determines a target attendee number. We have formulas based on historical performance that convert that to an overall attendee revenue number. Other revenue projections (such as vendor sponsorships) come from different parts of the organization. I hope to have another post with more details on how we project revenues. The next step is to budget expenses. Board members fill out a sample spreadsheet with their budget for the year. They can add line items and notes describing what the amounts are for. Each Board portfolio typically has from 10 to 30 line items. Any new initiatives they want to pursue needs to be budgeted. The Summit operations budget is managed by HQ. It includes the cost for food, electrical, internet, etc. Most of these come from our estimate of attendees and our contract with the convention center. During this process the Board can ask for more or less to be spent on various line items. For example, if we weren’t happy with the Internet at the last Summit we can ask them to look into different options and/or increasing the budget. HQ will also make adjustments to these numbers based on what they see at the events and the feedback we receive on the surveys. After we have all the initial estimates we start reviewing the entire budget. It is sent out to the Board and we can see what each portfolio requested and what the overall profit and loss number is. We usually start with too much in expenses and need to cut. In years past the Board started haggling over these numbers as a group. This past year they decided I should take a first cut and present them with a reasonable budget and a list of what I changed. That worked well and I think we’ll continue to do that in the future. We go through a number of iterations on the budget. If I remember correctly, we went through 32 iterations before we passed the budget. At each iteration various revenue and expense numbers can change. Keep in mind that the PASS budget has 200+ line items spread over 20 portfolios. Many of these depend on other numbers. For example, if we decide increase the projected attendees that cascades through our budget. At each iteration we list what changed and the impact. Ideally these discussions will take place at a face-to-face Board meeting. Many of them also take place over the phone. Board members explain any increase they are asking for while performing due diligence on other budget requests. Eventually a budget emerges and is passed. Publishing After the budget is passed we create a version without the formulas and salaries for posting on the web site. Sandy also creates some charts to help our members understand the budget. The EVP writes a nice little letter describing some of the changes from last year’s budget. You can see my letter and our budget on the PASS Governance page. And then, eight months later, we start all over again.

Read the article

Advice for a distracted, unhappy, recently graduated programmer? [closed]

- by Re-Invent

I graduated 4 months ago. I had offers from a few good places to work at. At the same time I wanted to stick to building a small software business of my own, still have some ideas with good potential, some half done projects frozen in my github. But due to social pressures, I chose a job, the pay is great, but I am half-passionate about it. A small team of smart folks building useful product, working out contracts across the world. I've started finding it extremely boring. Boring to the extent that I skip 2-3 days a week together not doing work. Neither do I spend that time progressing any of my own projects. Yes, I feel stupid at the way I'm wasting time, but I don't understand exactly why is it happening. It's as if all the excitement has been drained. What can I do about it? Long version: School - I was in third standard. Only students, 6th grade had access to computer labs. I once peeked into the lab from the little door opening. No hard-disks, MS DOS on 5 1/2 inch floppies. I asked a senior student to play some sound in BASIC. He used PLAY to compose a tune. Boy! I was so excited, I was jumping from within. Back home, asked my brother to teach me some programming. We bought a book "MODERN All About GW-BASIC for Schools & Colleges". The book had everything, right from printing, to taking input, file i/o, game programming, machine level support, etc. I was in 6th standard, wrote my first game - a wheel of fortune, rotated the wheel by manipulating 16 color palette's definition. Got internet soon, got hooked to QuickBasic programming community. Made some more games "007 in Danger", "Car Crush 2" for submission to allbasiccode archives. I was extremely excited about all this. My interests now swayed into "hacking" (computer security). Taught myself some perl, found it annoying, learnt PHP and a bit of SQL. Also taught myself Visual Basic one of the winters and wrote a pacman clone with Direct X. By the time I was in 10th standard, I created some evil tools using visual basic, php and mysql and eventually landed myself into an unpaid side-job at a government facility, building evil tools for them. It was a dream come true for crackers of that time. And so was I, still very excited. Things changed soon, last two years of school were not so great as I was balancing preps for college, work at govt. and studies for school at same time. College - College was opposite of all I had wished it to be. I imagined it to be a place where I'd spend my 4 years building something awesome. It was rather an epitome of rote learning, attendance, rules, busy schedules, ban on personal laptops, hardly any hackers surrounding you and shit like that. We had to take permissions to even introduce some cultural/creative activities in our annual schedule. The labs won't be open on weekends because the lab employees had to have their leaves. Yes, a horrible place for someone like me. I still managed to pull out a project with a friend over 2 months. Showed it to people high in the academia hierarchy. They were immensely impressed, we proposed to allow personal computers for students. They made up half-assed reasons and didn't agree. We felt frustrated. And so on, I still managed to teach myself new languages, do new projects of my own, do an intern at the same govt. facility, start a small business for sometime, give a talk at a conference I'm passionate about, win game-dev and hacking contest at most respected colleges, solve good deal of programming contest problems, etc. At the same time I was not content with all these restrictions, great emphasis on rote learning, and sheer wastage of time due to college. I never felt I was overdoing, but now I feel I burnt myself out. During my last days at college, I did an intern at a bigco. While I spent my time building prototypes for certain LBS, the other interns around me, even a good friend, was just skipping time. I thought maybe, in a few weeks he would put in some serious efforts at work assigned to him, but all he did was to find creative ways to skip work, hide his face from manager, engage people in talks if they try to question his progress, etc. I tried a few time to get him on track, but it seems all he wanted was to "not to work hard at all and still reap the fruits". I don't know how others take such people, but I find their vicinity very very poisonous to one's own motivation and productivity. Over that, the place where I come from, HRs don't give much value to what have you done past 4 years. So towards the end of out intern, we all were offered work at the bigco, but the slacker, even after not writing more than 200 lines of code was made a much better offer. I felt enraged instantly - "Is this how the corp world treats someone who does fruitful, if not extra-ordinary work form them for past 6 months?". Yes, I did try to negotiate and debate. The bigcos seem blind due to departmentalization of responsibilities and many layers of management. I decided not to be in touch with any characters of that depressing play. Probably the busy time I had at college, ignoring friends, ignoring fun and squeezing every bit of free time for myself is also responsible. Probably this is what has drained all my willingness to work for anyone. I find my day job boring, at the same time I with to maintain it for financial reasons. I feel a bit burnt out, unsatisfied and at the same time an urge to quit working for someone else and start finishing my frozen side-projects (which may be profitable). Though I haven't got much to support myself with food, office, internet bills, etc in savings. I still have my day job, but I don't find it very interesting, even though the pay is higher than the slacker, I don't find money to be a great motivator here. I keep comparing myself to my past version. I wonder how to get rid of this and reboot myself back to the way I was in school days - excited about it, tinkering, building, learning new things daily, and NOT BORED?

Read the article

How To: Using SimpleMembserhipProvider with MySql Connector/Net.

- by Francisco Tirado

Now on Connector/Net 6.9 the users will have the ability to use SimpleMembership Provider on MVC4 templates. The configuration is very simple and also have compatibility with OAuth, in this post we'll explain step by step how to configure it in a MVC 4 Web Application. Requirements The requirements to use SimpleMembership with Connector/Net are: Install Connector/Net 6.9, or download the No Install version. Net Framework 4.0 or greater. MVC 4 Visual Studio 2012 or newer version Creating and configuring a new project In this example we'll use VS2012 to create the project basis on the Internet Aplication template and using Entity Framework to manage the User model. Open VS 2012 and create a new project, we'll create a new MVC 4 Web Application and configure the project to use Net Framework 4.5. Type a name for the project and then click “Ok”. In the next dialog we'll choose the “Internet Application” template and use Razor as engine without creating a test project. Click “Ok” to continue. Now we have a new project with the templates necessaries to run a Web Application with the default values. We'll use the current files to continue working. If you have installed Connector/Net you can skip this step, if you don't have installed but you're planning to do it, please install it and continue with the next step. If you're using the No Install version of Connector/Net we'll need to add the references to our project, the assemblies needed are: MySql.Data, MySql.Data.Entities and MySql.Web. Be sure that the assemblies chosen match the Net Framework version used in our project and the MySql.Data.Entities is compatible with EF5 (EF5 is the default added by the project). Now open the “web.config” file, and under the <connectionStrings> node add a connection string that points to a MySql instance. We'll use the following connection configuration: <add name="MyConnection" connectionString="server=localhost;UserId=root;password=pass;database=MySqlSimpleMembership;" providerName="MySql.Data.MySqlClient"/> Under the node <system.web> we'll add the following configuration: <membership defaultProvider="MySqlSimpleMembershipProvider"><providers><clear/><add name="MySqlSimpleMembershipProvider" type="MySql.Web.Security.MySqlSimpleMembershipProvider,MySql.Web,Version=6.9.3.0,Culture=neutral,PublicKeyToken=c5687fc88969c44d" applicationName="MySqlSimpleMembershipTest" description="MySQLdefaultapplication" connectionStringName="MyConnection" userTableName="UserProfile" userIdColumn="UserId" userNameColumn="UserName" autoGenerateTables="True"/></providers></membership> In the previous configuration the mandatory properties are: connectionStringName, userTableName, userIdColumn, userNameColumn and autoGenerateTables. If the other properties are not provided a default value is set to it but if the mandatory properties are not set a ProviderException will be thrown. The valid properties for the MySqlSimpleMembership are the same used for MySqlMembership plus the mandatory fields. UserTableName: Name of the table where will be stored the user, this table is independent from the schema generated by the provider and can be edited later by the user. UserId: name of the column that will store the id for the records in the userTableName. UserName : name of the column that will store the name/user for the records in the userTableName. The connectionStringName property must match a connection string defined in web.config file. Once the configuration is done in web.config, we need to be sure that our database context for the Users Table point to the right connection string. In our case we just need to update the class UsersContext in the file AcountModel.cs in the Models folder. The file also contains the UserProfile class which match the configuration for our UserTable. Other class that needs to be updated is the SimpleMembershipInitializer in the file InitializeSimpleMembershipAttribute.cs in the Filters folder. In that class we'll see a call to the method “WebSecurity.InitializeDatabaseConnection”, in that call is where we need to update the parameters to match our configuration. If the database that you configure in your connection string doesn't exists, you need to create it empty. Now we're ready to run our web application, press F5 or the Run button in the tool bar. You'll see the following screen: If you go to your database used by the application you'll see some tables created, now we are using SimpleMembership. Now create a user, click on “Register” at the top-right in the web page. Type your user name and password, then click on “Register”. You'll be redirected to the home page and you'll see the name of your user at the top-right page. If you take a look on the tables just created in your database you will find the data about the user you just register. In our case the tables that contains the information are UserProfile and Webpages_Membership. Configuring OAuth Other option to access your website will be using OAuth, so you can validate an user using an external account like Facebook, Twitter, Google, etc. In this post we'll enable the authentication for Google account in our application. Go to the class AuthConfig.cs in the folder App_Start. In the method “RegisterAuth” uncomment the last line where is the call to the method “OauthWebSecurity.RegisterGoogleClient”. Run the application. Once the application is running click on “Login”. You will see at the right side the option to login using a Google account, click on “Google”. You will be asked for Google credentials. If your login is successful you'll see a message asking for your approval to give permission to your site to access your information. Click on “Accept”. Now a page to register your user will be shown, click on “Register”. Now your new user is logged in in your application. You can take a look of the user information created in the tables UserProfile and Webpages_OauthMembership. If you want to use another external option to authenticate users you must enable the client in the same class where we enable the Google authentication, but for others providers is mandatory to register your Application in their site. Once you have register your application they will give you a token/key and the id for your application, that information you're going to use it to register the client. Thanks for reading.

Read the article

Strange Flash AS3 xml Socket behavior

- by Rnd_d

I have a problem which I can't understand. To understand it I wrote a socket client on AS3 and a server on python/twisted, you can see the code of both applications below. Let's launch two clients at the same time, arrange them so that you can see both windows and press connection button in both windows. Then press and hold any button. What I'm expecting: Client with pressed button sends a message "some data" to the server, then the server sends this message to all the clients(including the original sender) . Then each client moves right the button 'connectButton' and prints a message to the log with time in the following format: "min:secs:milliseconds". What is going wrong: The motion is smooth in the client that sends the message, but in all other clients the motion is jerky. This happens because messages to those clients arrive later than to the original sending client. And if we have three clients (let's name them A,B,C) and we send a message from A, the sending time log of B and C will be the same. Why other clients recieve this messages later than the original sender? By the way, on ubuntu 10.04/chrome all the motion is smooth. Two clients are launched in separated chromes. windows screenshot Can't post linux screenshot, need more than 10 reputation to post more hyperlinks. Listing of log, four clients simultaneously: [16:29:33.280858] 62.140.224.1 >> some data [16:29:33.280912] 87.249.9.98 << some data [16:29:33.280970] 87.249.9.98 << some data [16:29:33.281025] 87.249.9.98 << some data [16:29:33.281079] 62.140.224.1 << some data [16:29:33.323267] 62.140.224.1 >> some data [16:29:33.323326] 87.249.9.98 << some data [16:29:33.323386] 87.249.9.98 << some data [16:29:33.323440] 87.249.9.98 << some data [16:29:33.323493] 62.140.224.1 << some data [16:29:34.123435] 62.140.224.1 >> some data [16:29:34.123525] 87.249.9.98 << some data [16:29:34.123593] 87.249.9.98 << some data [16:29:34.123648] 87.249.9.98 << some data [16:29:34.123702] 62.140.224.1 << some data AS3 client code package { import adobe.utils.CustomActions; import flash.display.Sprite; import flash.events.DataEvent; import flash.events.Event; import flash.events.IOErrorEvent; import flash.events.KeyboardEvent; import flash.events.MouseEvent; import flash.events.SecurityErrorEvent; import flash.net.XMLSocket; import flash.system.Security; import flash.text.TextField; public class Main extends Sprite { private var socket :XMLSocket; private var textField :TextField = new TextField; private var connectButton :TextField = new TextField; public function Main():void { if (stage) init(); else addEventListener(Event.ADDED_TO_STAGE, init); } private function init(event:Event = null):void { socket = new XMLSocket(); socket.addEventListener(Event.CONNECT, connectHandler); socket.addEventListener(DataEvent.DATA, dataHandler); stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler); addChild(textField); textField.y = 50; textField.width = 780; textField.height = 500; textField.border = true; connectButton.selectable = false; connectButton.border = true; connectButton.addEventListener(MouseEvent.MOUSE_DOWN, connectMouseDownHandler); connectButton.width = 105; connectButton.height = 20; connectButton.text = "click here to connect"; addChild(connectButton); } private function connectHandler(event:Event):void { textField.appendText("Connect\n"); textField.appendText("Press and hold any key\n"); } private function dataHandler(event:DataEvent):void { var now:Date = new Date(); textField.appendText(event.data + " time = " + now.getMinutes() + ":" + now.getSeconds() + ":" + now.getMilliseconds() + "\n"); connectButton.x += 2; } private function keyDownHandler(event:KeyboardEvent):void { socket.send("some data"); } private function connectMouseDownHandler(event:MouseEvent):void { var connectAddress:String = "ep1c.org"; var connectPort:Number = 13250; Security.loadPolicyFile("xmlsocket://" + connectAddress + ":" + String(connectPort)); socket.connect(connectAddress, connectPort); } } } Python server code from twisted.internet import reactor from twisted.internet.protocol import ServerFactory from twisted.protocols.basic import LineOnlyReceiver import datetime class EchoProtocol(LineOnlyReceiver): ##### name = "" id = 0 delimiter = chr(0) ##### def getName(self): return self.transport.getPeer().host def connectionMade(self): self.id = self.factory.getNextId() print "New connection from %s - id:%s" % (self.getName(), self.id) self.factory.clientProtocols[self.id] = self def connectionLost(self, reason): print "Lost connection from "+ self.getName() del self.factory.clientProtocols[self.id] self.factory.sendMessageToAllClients(self.getName() + " has disconnected.") def lineReceived(self, line): print "[%s] %s >> %s" % (datetime.datetime.now().time(), self, line) if line=="<policy-file-request/>": data = """<?xml version="1.0"?> <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">  <cross-domain-policy> <allow-access-from domain="*" to-ports="%s" /> </cross-domain-policy>""" % PORT self.send(data) else: self.factory.sendMessageToAllClients( line ) def send(self, line): print "[%s] %s << %s" % (datetime.datetime.now().time(), self, line) if line: self.transport.write( str(line) + chr(0)) else: print "Nothing to send" def __str__(self): return self.getName() class ChatProtocolFactory(ServerFactory): protocol = EchoProtocol def __init__(self): self.clientProtocols = {} self.nextId = 0 def getNextId(self): id = self.nextId self.nextId += 1 return id def sendMessageToAllClients(self, msg): for client in self.clientProtocols: self.clientProtocols[client].send(msg) def sendMessageToClient(self, id, msg): self.clientProtocols[id].send(msg) PORT = 13250 print "Starting Server" factory = ChatProtocolFactory() reactor.listenTCP(PORT, factory) reactor.run()

Read the article

Process: Unable to start service com.google.android.gms.checkin.CheckinService with Intent

- by AndyRoid

I'm trying to build a Google map application but keep receiving this in my LogCat. I have all the permissions and meta-data set in my manifest, but am still dumbfounded by this error. Have looked everywhere on SO for this specific error but found nothing relating to com.google.android.gms.checkin A little bit about my structural hierarchy. MainActivity extends ActionBarActivity with three tabs underneath actionbar. Each tab has it's own fragment. On the gMapFragment I create a GPSTrack object from my GPSTrack class which extends Service and implements LocationListener. The problem is that when I start the application I get this message: I have all my libraries imported properly and I even added the google-play-services.jar into my libs folder. I also installed Google Play Services APKs through CMD onto my emulator. Furthermore the LocationManager lm = = (LocationManager) mContext.getSystemService(LOCATION_SERVICE); in my GPSTrack class always returns null. Why is this and how can I fix these issues? Would appreciate an explanation along with solution too, I want to understand what's going on here. ============== Code: gMapFragment.java public class gMapFragment extends SupportMapFragment { private final String TAG = "gMapFragment"; private GoogleMap mMap; protected SupportMapFragment mapFrag; private Context mContext = getActivity(); private static View view; @Override public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) { if (view != null) { ViewGroup parent = (ViewGroup) view.getParent(); if (parent != null) { parent.removeView(view); } } try { super.onCreateView(inflater, container, savedInstanceState); view = inflater.inflate(R.layout.fragment_map, container, false); setupGoogleMap(); } catch (Exception e) { /* * Map already there , just return as view */ } return view; } private void setupGoogleMap() { mapFrag = (SupportMapFragment) getFragmentManager().findFragmentById( R.id.mapView); if (mapFrag == null) { FragmentManager fragManager = getFragmentManager(); FragmentTransaction fragTransaction = fragManager .beginTransaction(); mapFrag = SupportMapFragment.newInstance(); fragTransaction.replace(R.id.mapView, mapFrag).commit(); } if (mapFrag != null) { mMap = mapFrag.getMap(); if (mMap != null) { setupMap(); mMap.setOnMapClickListener(new OnMapClickListener() { @Override public void onMapClick(LatLng point) { // TODO your click stuff on map } }); } } } @Override public void onAttach(Activity activity) { super.onAttach(activity); Log.d("Attach", "on attach"); } @Override public void onDetach() { super.onDetach(); } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); } @Override public void onResume() { super.onResume(); } @Override public void onPause() { super.onPause(); } @Override public void onDestroy() { super.onDestroy(); } private void setupMap() { GPSTrack gps = new GPSTrack(mContext); // Enable MyLocation layer of google map mMap.setMyLocationEnabled(true); Log.d(TAG, "MyLocation enabled"); // Set Map type mMap.setMapType(GoogleMap.MAP_TYPE_NORMAL); // Grab current location **ERROR HERE/Returns Null** Location location = gps.getLocation(); Log.d(TAG, "Grabbing location..."); if (location != null) { Log.d(TAG, "location != null"); // Grab Latitude and Longitude double latitude = location.getLatitude(); double longitude = location.getLongitude(); Log.d(TAG, "Getting lat, long.."); // Initialize LatLng object LatLng latLng = new LatLng(latitude, longitude); Log.d(TAG, "LatLng initialized"); // Show current location on google map mMap.moveCamera(CameraUpdateFactory.newLatLng(latLng)); // Zoom in on google map mMap.animateCamera(CameraUpdateFactory.zoomTo(20)); mMap.addMarker(new MarkerOptions().position( new LatLng(latitude, longitude)).title("You are here.")); } else { gps.showSettingsAlert(); } } } GPSTrack.java public class GPSTrack extends Service implements LocationListener{ private final Context mContext; private boolean isGPSEnabled = false; //See if network is connected to internet private boolean isNetworkEnabled = false; //See if you can grab the location private boolean canGetLocation = false; protected Location location = null; protected double latitude; protected double longitude; private static final long MINIMUM_DISTANCE_CHANGE_FOR_UPDATES = 10; //10 Meters private static final long MINIMUM_TIME_CHANGE_FOR_UPDATES = 1000 * 60 * 1; //1 minute protected LocationManager locationManager; public GPSTrack(Context context) { this.mContext = context; getLocation(); } public Location getLocation() { try { //Setup locationManager for controlling location services **ERROR HERE/Return Null** locationManager = (LocationManager) mContext.getSystemService(LOCATION_SERVICE); //See if GPS is enabled isGPSEnabled = locationManager.isProviderEnabled(LocationManager.GPS_PROVIDER); //See if Network is connected to the internet or carrier service isNetworkEnabled = locationManager.isProviderEnabled(LocationManager.NETWORK_PROVIDER); if (!isGPSEnabled && !isNetworkEnabled) { Toast.makeText(getApplicationContext(), "No Network Provider Available", Toast.LENGTH_SHORT).show(); } else { this.canGetLocation = true; if (isNetworkEnabled) { locationManager.requestLocationUpdates( LocationManager.NETWORK_PROVIDER, MINIMUM_TIME_CHANGE_FOR_UPDATES, MINIMUM_DISTANCE_CHANGE_FOR_UPDATES, this); Log.d("GPS", "GPS Enabled"); if (locationManager != null) { location = locationManager.getLastKnownLocation(LocationManager.GPS_PROVIDER); if (location != null) { latitude = location.getLatitude(); longitude = location.getLongitude(); } } } } } catch (Exception e) { e.printStackTrace(); } return location; } public void stopUsingGPS() { if (locationManager != null) { locationManager.removeUpdates(GPSTrack.this); } } public double getLatitude() { if (location != null) { latitude = location.getLatitude(); } return latitude; } public double getLongitude() { if (location != null) { longitude = location.getLongitude(); } return longitude; } public boolean canGetLocation() { return this.canGetLocation; } public void showSettingsAlert() { AlertDialog.Builder alertDialog = new AlertDialog.Builder(mContext); //AlertDialog title alertDialog.setTitle("GPS Settings"); //AlertDialog message alertDialog.setMessage("GPS is not enabled. Do you want to go to Settings?"); alertDialog.setPositiveButton("Settings", new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { // TODO Auto-generated method stub Intent i = new Intent(Settings.ACTION_LOCATION_SOURCE_SETTINGS); mContext.startActivity(i); } }); alertDialog.setNegativeButton("Cancel", new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { // TODO Auto-generated method stub dialog.cancel(); } }); alertDialog.show(); } @Override public void onLocationChanged(Location location) { // TODO Auto-generated method stub } @Override public void onStatusChanged(String provider, int status, Bundle extras) { // TODO Auto-generated method stub } @Override public void onProviderEnabled(String provider) { // TODO Auto-generated method stub } @Override public void onProviderDisabled(String provider) { // TODO Auto-generated method stub } @Override public IBinder onBind(Intent intent) { // TODO Auto-generated method stub return null; } } logcat 06-08 22:35:03.441: E/AndroidRuntime(1370): FATAL EXCEPTION: main 06-08 22:35:03.441: E/AndroidRuntime(1370): Process: com.google.android.gms, PID: 1370 06-08 22:35:03.441: E/AndroidRuntime(1370): java.lang.RuntimeException: Unable to start service com.google.android.gms.checkin.CheckinService@b1094e48 with Intent { cmp=com.google.android.gms/.checkin.CheckinService }: java.lang.SecurityException: attempting to read gservices without permission: Neither user 10053 nor current process has com.google.android.providers.gsf.permission.READ_GSERVICES. 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ActivityThread.handleServiceArgs(ActivityThread.java:2719) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ActivityThread.access$2100(ActivityThread.java:135) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1293) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.os.Handler.dispatchMessage(Handler.java:102) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.os.Looper.loop(Looper.java:136) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ActivityThread.main(ActivityThread.java:5017) 06-08 22:35:03.441: E/AndroidRuntime(1370): at java.lang.reflect.Method.invokeNative(Native Method) 06-08 22:35:03.441: E/AndroidRuntime(1370): at java.lang.reflect.Method.invoke(Method.java:515) 06-08 22:35:03.441: E/AndroidRuntime(1370): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:779) 06-08 22:35:03.441: E/AndroidRuntime(1370): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:595) 06-08 22:35:03.441: E/AndroidRuntime(1370): at dalvik.system.NativeStart.main(Native Method) 06-08 22:35:03.441: E/AndroidRuntime(1370): Caused by: java.lang.SecurityException: attempting to read gservices without permission: Neither user 10053 nor current process has com.google.android.providers.gsf.permission.READ_GSERVICES. 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ContextImpl.enforce(ContextImpl.java:1685) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ContextImpl.enforceCallingOrSelfPermission(ContextImpl.java:1714) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.content.ContextWrapper.enforceCallingOrSelfPermission(ContextWrapper.java:572) 06-08 22:35:03.441: E/AndroidRuntime(1370): at imq.c(SourceFile:107) 06-08 22:35:03.441: E/AndroidRuntime(1370): at imq.a(SourceFile:121) 06-08 22:35:03.441: E/AndroidRuntime(1370): at imq.a(SourceFile:227) 06-08 22:35:03.441: E/AndroidRuntime(1370): at bwq.c(SourceFile:166) 06-08 22:35:03.441: E/AndroidRuntime(1370): at com.google.android.gms.checkin.CheckinService.a(SourceFile:237) 06-08 22:35:03.441: E/AndroidRuntime(1370): at com.google.android.gms.checkin.CheckinService.onStartCommand(SourceFile:211) 06-08 22:35:03.441: E/AndroidRuntime(1370): at android.app.ActivityThread.handleServiceArgs(ActivityThread.java:2702) AndroidManifest <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.app" android:versionCode="1" android:versionName="1.0" > <uses-sdk android:minSdkVersion="14" android:targetSdkVersion="19" /> <uses-permission android:name="com.curio.permission.MAPS_RECEIVE" /> <uses-permission android:name="android.permission.CAMERA" /> <uses-permission android:name="android.permission.INTERNET" /> <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" /> <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" /> <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" /> <uses-permission android:name="android.permission.ACCESS_WIFI_STATE" /> <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" /> <uses-permission android:name="com.google.android.providers.gsf.permission.READ_GSERVICES" /> <uses-permission android:name="android.permission.ACCESS_MOCK_LOCATION" /> <uses-feature android:name="android.hardware.camera" android:required="true" /> <uses-feature android:glEsVersion="0x00020000" android:required="true" /> <application android:allowBackup="true" android:icon="@drawable/ic_launcher" android:label="@string/app_name" android:theme="@style/AppTheme" > <activity android:name="com.app.MainActivity" android:label="@string/app_name" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <meta-data android:name="com.google.android.gms.version" android:value="@integer/google_play_services_version" /> <meta-data android:name="com.google.android.maps.v2.API_KEY" android:value="AI........................" /> </application>

Read the article

"Exception has been thrown by the target of an invocation" Running Tests - VS2008 SP1

- by omatrot

I'm using Visual Studio 2008 Team Suite and I'm unable to run tests and display the Test/Windows/Test Result Window. The result is a dialog box with the following content : "Exception has been thrown by the target of an invocation". Team Explorer has been installed after Visual Studio 2008 SP1. So I have re-apllied the service pack. Searching the web I found that this error is pretty common but unfortunately, the proposed solutions does not work for me. The problem was never analysed so I decided to give it a try : I reproduced the problem on a computer, attached the process with windbg and start with the basic investigations. Following are the first results : 0:000>!dumpstack OS Thread Id: 0xdb0 (0) Current frame: USER32!NtUserWaitMessage+0x15 ChildEBP RetAddr Caller,Callee 003fec94 75a32674 USER32!DialogBox2+0x222, calling USER32!NtUserWaitMessage 003fecd0 75a3288a USER32!InternalDialogBox+0xe5, calling USER32!DialogBox2 003fecfc 75a6f8d0 USER32!SoftModalMessageBox+0x757, calling USER32!InternalDialogBox 003fed3c 6eb61996 mscorwks!Thread::ReverseLeaveRuntime+0x95, calling mscorwks!_EH_epilog3 003fedb0 75a6fbac USER32!MessageBoxWorker+0x269, calling USER32!SoftModalMessageBox 003fede0 6ea559c3 mscorwks!SetupThreadNoThrow+0x19a, calling mscorwks!_EH_epilog3_catch_GS 003fee24 6eb61d8a mscorwks!HasIllegalReentrancy+0xac, calling mscorwks!_EH_epilog3 003fee30 6ea89796 mscorwks!SimpleComCallWrapper::Release+0x2e, calling mscorwks!CompareExchangeMP 003fee38 6ea0da05 mscorwks!CLRException::HandlerState::CleanupTry+0x16, calling mscorwks!GetCurrentSEHRecord 003fee44 6ea0c9c0 mscorwks!Thread::EnablePreemptiveGC+0xf, calling mscorwks!Thread::CatchAtSafePoint 003fee4c 6ea8a241 mscorwks!Unknown_Release_Internal+0x24d, calling mscorwks!GCHolder<1,0,0>::Pop 003fee50 6ea0c86c mscorwks!_EH_epilog3_catch_GS+0xa, calling mscorwks!__security_check_cookie 003fee54 6ea8a24c mscorwks!Unknown_Release_Internal+0x258, calling mscorwks!_EH_epilog3_catch_GS 003fee7c 75a16941 USER32!UserCallWinProcCheckWow+0x13d, calling ntdll!RtlDeactivateActivationContextUnsafeFast 003feed8 7082119e msenv!ATL::CComCritSecLock<ATL::CComCriticalSection>::Lock+0xd, calling ntdll!RtlEnterCriticalSection 003fef08 75a6fe5b USER32!MessageBoxIndirectW+0x2e, calling USER32!MessageBoxWorker 003fef7c 70a1e367 msenv!MessageBoxPVoidW+0xda 003fefd4 70a1db60 msenv!VBDialogCover2+0x11b 003ff01c 70a1e4c0 msenv!VBMessageBox2W+0xf0, calling msenv!VBDialogCover2 003ff044 7087246b msenv!main_GetAppNameW+0xa, calling msenv!GetAppNameInternal 003ff04c 70a1e4f2 msenv!VBMessageBox3W+0x1c, calling msenv!VBMessageBox2W 003ff064 70a1d6d7 msenv!_IdMsgShow+0x362, calling msenv!VBMessageBox3W 003ff0cc 70951841 msenv!TaskDialogCallback+0x7e0, calling msenv!_IdMsgShow 003ff118 6eb20da4 mscorwks!Unknown_QueryInterface+0x230, calling mscorwks!_EH_epilog3_catch_GS 003ff14c 6eb20c43 mscorwks!Unknown_QueryInterface_Internal+0x3d8, calling mscorwks!_EH_epilog3_catch_GS 003ff168 02006ec4 02006ec4, calling 0247a1e8 003ff16c 6ea0c86c mscorwks!_EH_epilog3_catch_GS+0xa, calling mscorwks!__security_check_cookie 003ff198 6eb20562 mscorwks!COMToCLRWorker+0xb34, calling mscorwks!_EH_epilog3_catch_GS 003ff19c 0247a235 0247a235, calling mscorwks!COMToCLRWorker 003ff1c4 7083249f msenv!CVSCommandTarget::ExecCmd+0x937 003ff1e4 7086d5c8 msenv!VsReportErrorInfo+0x11, calling msenv!TaskDialogCallback+0xd8 003ff1f8 7093e65b msenv!CVSCommandTarget::ExecCmd+0x945, calling msenv!VsReportErrorInfo 003ff25c 7081f53a msenv!ATL::CComPtr<IVsLanguageInfo>::~CComPtr<IVsLanguageInfo>+0x24, calling msenv!_EH_epilog3 003ff260 70b18d72 msenv!LogCommand+0x4c, calling msenv!ATL::CComPtr<IVsCodePageSelection>::~CComPtr<IVsCodePageSelection> 003ff264 70b18d77 msenv!LogCommand+0x51, calling msenv!_EH_epilog3 003ff280 70a4fd0e msenv!CMsoButtonUser::FClick+0x1d1, calling msenv!CVSCommandTarget::ExecCmd 003ff2f4 70823a87 msenv!CTLSITE::QueryInterface+0x16 003ff31c 70cb7d4d msenv!TBCB::FNotifyFocus+0x204 003ff35c 70ce5fda msenv!TB::NotifyControl+0x101 003ff3bc 709910f6 msenv!TB::FRequestFocus+0x4ed, calling msenv!TB::NotifyControl 003ff414 708254ba msenv!CMsoButtonUser::FEnabled+0x3d, calling msenv!GetQueryStatusFlags 003ff428 7086222a msenv!TBC::FAutoEnabled+0x24 003ff43c 7098e1eb msenv!TB::LProcessInputMsg+0xdb4 003ff458 6bec1c49 (MethodDesc 0x6bcd7f54 +0x89 System.Windows.Forms.Form.DefWndProc(System.Windows.Forms.Message ByRef)), calling 6be3b738 003ff50c 70823ab0 msenv!FPtbFromSite+0x16 003ff520 70991c43 msenv!TB::PtbParent+0x25, calling msenv!FPtbFromSite 003ff52c 708dda49 msenv!TBWndProc+0x2da 003ff588 0203d770 0203d770, calling 0247a1e8 003ff598 70822a70 msenv!CPaneFrame::Release+0x118, calling msenv!_EH_epilog3 003ff5b0 75a16238 USER32!InternalCallWinProc+0x23 003ff5dc 75a168ea USER32!UserCallWinProcCheckWow+0x109, calling USER32!InternalCallWinProc 003ff620 75a16899 USER32!UserCallWinProcCheckWow+0x6a, calling ntdll!RtlActivateActivationContextUnsafeFast 003ff654 75a17d31 USER32!DispatchMessageWorker+0x3bc, calling USER32!UserCallWinProcCheckWow 003ff688 70847f2b msenv!CMsoComponent::FPreTranslateMessage+0x72, calling msenv!MainFTranslateMessage 003ff6b4 75a17dfa USER32!DispatchMessageW+0xf, calling USER32!DispatchMessageWorker 003ff6c4 70831553 msenv!EnvironmentMsgLoop+0x1ea, calling USER32!DispatchMessageW 003ff6f8 708eb9bd msenv!CMsoCMHandler::FPushMessageLoop+0x86, calling msenv!EnvironmentMsgLoop 003ff724 708eb94d msenv!SCM::FPushMessageLoop+0xb7 003ff74c 708eb8e9 msenv!SCM_MsoCompMgr::FPushMessageLoop+0x28, calling msenv!SCM::FPushMessageLoop 003ff768 708eb8b8 msenv!CMsoComponent::PushMsgLoop+0x28 003ff788 708ebe4e msenv!VStudioMainLogged+0x482, calling msenv!CMsoComponent::PushMsgLoop 003ff7ac 70882afe msenv!CVsActivityLogSingleton::Instance+0xdf, calling msenv!_EH_epilog3 003ff7d8 70882afe msenv!CVsActivityLogSingleton::Instance+0xdf, calling msenv!_EH_epilog3 003ff7dc 707e4e31 msenv!VActivityLogStartupEntries+0x42 003ff7f4 7081f63b msenv!ATL::CComPtr<IClassFactory>::~CComPtr<IClassFactory>+0x24, calling msenv!_EH_epilog3 003ff7f8 708b250f msenv!ATL::CComQIPtr<IUnknown,&IID_IUnknown>::~CComQIPtr<IUnknown,&IID_IUnknown>+0x1d, calling msenv!_EH_epilog3 003ff820 708e7561 msenv!VStudioMain+0xc1, calling msenv!VStudioMainLogged 003ff84c 2f32aabc devenv!util_CallVsMain+0xff 003ff878 2f3278f2 devenv!CDevEnvAppId::Run+0x11fd, calling devenv!util_CallVsMain 003ff97c 77533b23 ntdll!RtlpAllocateHeap+0xe73, calling ntdll!_SEH_epilog4 003ff9f0 77536cd7 ntdll!RtlpLowFragHeapAllocFromContext+0x882, calling ntdll!RtlpSubSegmentInitialize 003ffa10 7753609f ntdll!RtlNtStatusToDosError+0x3b, calling ntdll!RtlNtStatusToDosErrorNoTeb 003ffa14 775360a4 ntdll!RtlNtStatusToDosError+0x40, calling ntdll!_SEH_epilog4 003ffa40 775360a4 ntdll!RtlNtStatusToDosError+0x40, calling ntdll!_SEH_epilog4 003ffa44 75bd2736 kernel32!LocalBaseRegOpenKey+0x159, calling ntdll!RtlNtStatusToDosError 003ffa48 75bd2762 kernel32!LocalBaseRegOpenKey+0x22a, calling kernel32!_SEH_epilog4 003ffac4 75bd2762 kernel32!LocalBaseRegOpenKey+0x22a, calling kernel32!_SEH_epilog4 003ffac8 75bd28c9 kernel32!RegOpenKeyExInternalW+0x130, calling kernel32!LocalBaseRegOpenKey 003ffad8 75bd28de kernel32!RegOpenKeyExInternalW+0x211 003ffae0 75bd28e5 kernel32!RegOpenKeyExInternalW+0x21d, calling kernel32!_SEH_epilog4 003ffb04 6f282e2b MSVCR90!_unlock+0x15, calling ntdll!RtlLeaveCriticalSection 003ffb14 75bd2642 kernel32!BaseRegCloseKeyInternal+0x41, calling ntdll!NtClose 003ffb28 75bd25d0 kernel32!RegCloseKey+0xd4, calling kernel32!_SEH_epilog4 003ffb5c 75bd25d0 kernel32!RegCloseKey+0xd4, calling kernel32!_SEH_epilog4 003ffb60 2f321ea4 devenv!DwInitSyncObjects+0x340 003ffb90 2f327bf4 devenv!WinMain+0x74, calling devenv!CDevEnvAppId::Run 003ffbac 2f327c68 devenv!License::GetPID+0x258, calling devenv!WinMain 003ffc3c 75bd3677 kernel32!BaseThreadInitThunk+0xe 003ffc48 77539d72 ntdll!__RtlUserThreadStart+0x70 003ffc88 77539d45 ntdll!_RtlUserThreadStart+0x1b, calling ntdll!__RtlUserThreadStart 0:000> !pe -nested Exception object: 050aae9c Exception type: System.Reflection.TargetInvocationException Message: Exception has been thrown by the target of an invocation. InnerException: System.NullReferenceException, use !PrintException 050aac64 to see more StackTrace (generated): SP IP Function 003FEC2C 6D2700F7 mscorlib_ni!System.RuntimeType.CreateInstanceSlow(Boolean, Boolean)+0x57 003FEC5C 6D270067 mscorlib_ni!System.RuntimeType.CreateInstanceImpl(Boolean, Boolean, Boolean)+0xe7 003FEC94 6D270264 mscorlib_ni!System.Activator.CreateInstance(System.Type, Boolean)+0x44 003FECA4 6AD02DAF Microsoft_VisualStudio_Shell_9_0_ni!Microsoft.VisualStudio.Shell.Package.CreateToolWindow(System.Type, Int32, Microsoft.VisualStudio.Shell.ProvideToolWindowAttribute)+0x67 003FED30 6AD0311B Microsoft_VisualStudio_Shell_9_0_ni!Microsoft.VisualStudio.Shell.Package.CreateToolWindow(System.Type, Int32)+0xb7 003FED58 6AD02D12 Microsoft_VisualStudio_Shell_9_0_ni!Microsoft.VisualStudio.Shell.Package.FindToolWindow(System.Type, Int32, Boolean, Microsoft.VisualStudio.Shell.ProvideToolWindowAttribute)+0x7a 003FED88 6AD02D39 Microsoft_VisualStudio_Shell_9_0_ni!Microsoft.VisualStudio.Shell.Package.FindToolWindow(System.Type, Int32, Boolean)+0x11 003FED94 02585E30 Microsoft_VisualStudio_QualityTools_TestCaseManagement!Microsoft.VisualStudio.TestTools.TestCaseManagement.QualityToolsPackage.InitToolWindowVariable[[System.__Canon, mscorlib]](System.__Canon ByRef, System.String, Boolean)+0x58 003FEDD0 02585DBE Microsoft_VisualStudio_QualityTools_TestCaseManagement!Microsoft.VisualStudio.TestTools.TestCaseManagement.QualityToolsPackage.InitToolWindowVariable[[System.__Canon, mscorlib]](System.__Canon ByRef, System.String)+0x36 003FEDE4 02585D32 Microsoft_VisualStudio_QualityTools_TestCaseManagement!Microsoft.VisualStudio.TestTools.TestCaseManagement.QualityToolsPackage.ShowToolWindow[[System.__Canon, mscorlib]](System.__Canon ByRef, System.String, Boolean)+0x3a 003FEE00 02585AB4 Microsoft_VisualStudio_QualityTools_TestCaseManagement!Microsoft.VisualStudio.TestTools.TestCaseManagement.QualityToolsPackage.OpenTestResultsToolWindow()+0x2c 003FEE10 02585A6E Microsoft_VisualStudio_QualityTools_TestCaseManagement!Microsoft.VisualStudio.TestTools.TestCaseManagement.QualityToolsPackage.OnMenuViewTestResults(System.Object, System.EventArgs)+0x6 003FEE18 6CD4F993 System_ni!System.ComponentModel.Design.MenuCommand.Invoke()+0x43 003FEE40 6CD4F9D4 System_ni!System.ComponentModel.Design.MenuCommand.Invoke(System.Object)+0x8 003FEE48 6AD000FA Microsoft_VisualStudio_Shell_9_0_ni!Microsoft.VisualStudio.Shell.OleMenuCommandService.Microsoft.VisualStudio.OLE.Interop.IOleCommandTarget.Exec(System.Guid ByRef, UInt32, UInt32, IntPtr, IntPtr)+0x11a 003FEEA0 6AD03FB8 Microsoft_VisualStudio_Shell_9_0_ni!Microsoft.VisualStudio.Shell.Package.Microsoft.VisualStudio.OLE.Interop.IOleCommandTarget.Exec(System.Guid ByRef, UInt32, UInt32, IntPtr, IntPtr)+0x44 StackTraceString: <none> HResult: 80131604 0:000> !PrintException 050aac64 Exception object: 050aac64 Exception type: System.NullReferenceException Message: Object reference not set to an instance of an object. InnerException: <none> StackTrace (generated): SP IP Function 003FE660 078E60BE Microsoft_VisualStudio_TeamSystem_Integration!Microsoft.VisualStudio.TeamSystem.Integration.TcmResultsPublishManager..ctor(Microsoft.VisualStudio.TeamSystem.Integration.ResultsPublishManager)+0xc6 003FE674 078E5C91 Microsoft_VisualStudio_TeamSystem_Integration!Microsoft.VisualStudio.TeamSystem.Integration.ResultsPublishManager..ctor(Microsoft.VisualStudio.TeamSystem.Integration.TeamFoundationHostHelper)+0x59 003FE684 078E2FA0 Microsoft_VisualStudio_TeamSystem_Integration!Microsoft.VisualStudio.TeamSystem.Integration.VsetServerHelper..ctor(System.IServiceProvider)+0x50 003FE6A4 078E2E90 Microsoft_VisualStudio_TeamSystem_Common!Microsoft.VisualStudio.TeamSystem.Integration.Client.VsetHelper.InitializeThrow(System.IServiceProvider)+0x20 003FE6B8 078E2E2A Microsoft_VisualStudio_TeamSystem_Common!Microsoft.VisualStudio.TeamSystem.Integration.Client.VsetHelper.InitializeHelper(System.IServiceProvider)+0x22 003FE6E0 078E2DEC Microsoft_VisualStudio_TeamSystem_Common!Microsoft.VisualStudio.TeamSystem.Integration.Client.VsetHelper.CreateVsetHelper(System.IServiceProvider)+0x1c 003FE6F0 078E2DAC Microsoft_VisualStudio_QualityTools_TestCaseManagement!Microsoft.VisualStudio.TestTools.TestCaseManagement.QualityToolsPackage.get_VsetHelper()+0x14 003FE6F8 02586BBE Microsoft_VisualStudio_QualityTools_TestCaseManagement!Microsoft.VisualStudio.TestTools.TestCaseManagement.ResultsToolWindow..ctor()+0x9f6 003FE798 02585F8A Microsoft_VisualStudio_QualityTools_TestCaseManagement!Microsoft.VisualStudio.TestTools.TestCaseManagement.ResultToolWindowHost..ctor()+0x1a StackTraceString: <none> HResult: 80004003 In order to be able to continue the analysis, we need to get the parameters to see what is going on. I also tried to run devenv.exe with the /log switch. No error in the log after reproducing the problem. Finally, If Team Explorer is removed from the system, the problem goes away. Any help appreciated. TIA. Olivier.

Read the article

Best Practice for captcha based protection against D.O.S to Nginx Proxy

- by user325320

The idea is explained here In simple words, Nginx Proxy plays the role of load balance and transmits the HTTP/HTTPS requests to servers. If the number of request times within a certain period from an individual IP exceeds a threshold, it will trigger a captcha for the upcoming requests. And the end-user must input the correct captcha code before he can continue to access the site. Do you know any open source / free NGINX module for this usage? I searched on the Internet and here is one of them: https://github.com/snbuback/nginx seems it needs modification. Any suggestion / experience is welcome, thank you

Read the article

April 14th Links: ASP.NET, ASP.NET MVC, ASP.NET Web API and Visual Studio

- by ScottGu

Here is the latest in my link-listing blog series: ASP.NET Easily overlooked features in VS 11 Express for Web: Good post by Scott Hanselman that highlights a bunch of easily overlooked improvements that are coming to VS 11 (and specifically the free express editions) for web development: unit testing, browser chooser/launcher, IIS Express, CSS Color Picker, Image Preview in Solution Explorer and more. Get Started with ASP.NET 4.5 Web Forms: Good 5-part tutorial that walks-through building an application using ASP.NET Web Forms and highlights some of the nice improvements coming with ASP.NET 4.5. What is New in Razor V2 and What Else is New in Razor V2: Great posts by Andrew Nurse, a dev on the ASP.NET team, about some of the new improvements coming with ASP.NET Razor v2. ASP.NET MVC 4 AllowAnonymous Attribute: Nice post from David Hayden that talks about the new [AllowAnonymous] filter introduced with ASP.NET MVC 4. Introduction to the ASP.NET Web API: Great tutorial by Stephen Walher that covers how to use the new ASP.NET Web API support built-into ASP.NET 4.5 and ASP.NET MVC 4. Comprehensive List of ASP.NET Web API Tutorials and Articles: Tugberk Ugurlu links to a huge collection of articles, tutorials, and samples about the new ASP.NET Web API capability. Async Mashups using ASP.NET Web API: Nice post by Henrik on how you can use the new async language support coming with .NET 4.5 to easily and efficiently make asynchronous network requests that do not block threads within ASP.NET. ASP.NET and Front-End Web Development Visual Studio 11 and Front End Web Development - JavaScript/HTML5/CSS3: Nice post by Scott Hanselman that highlights some of the great improvements coming with VS 11 (including the free express edition) for front-end web development. HTML5 Drag/Drop and Async Multi-file Upload with ASP.NET Web API: Great post by Filip W. that demonstrates how to implement an async file drag/drop uploader using HTML5 and ASP.NET Web API. Device Emulator Guide for Mobile Development with ASP.NET: Good post from Rachel Appel that covers how to use various device emulators with ASP.NET and VS to develop cross platform mobile sites. Fixing these jQuery: A Guide to Debugging: Great presentation by Adam Sontag on debugging with JavaScript and jQuery. Some really good tips, tricks and gotchas that can save a lot of time. ASP.NET and Open Source Getting Started with ASP.NET Web Stack Source on CodePlex: Fantastic post by Henrik (an architect on the ASP.NET team) that provides step by step instructions on how to work with the ASP.NET source code we recently open sourced. Contributing to ASP.NET Web Stack Source on CodePlex: Follow-on to the post above (also by Henrik) that walks-through how you can submit a code contribution to the ASP.NET MVC, Web API and Razor projects. Overview of the WebApiContrib project: Nice post by Pedro Reys on the new open source WebApiContrib project that has been started to deliver cool extensions and libraries for use with ASP.NET Web API. Entity Framework Entity Framework 5 Performance Improvements and Performance Considerations for EF5: Good articles that describes some of the big performance wins coming with EF5 (which will ship with both .NET 4.5 and ASP.NET MVC 4). Automatic compilation of LINQ queries will yield some significant performance wins (up to 600% faster). ASP.NET MVC 4 and EF Database Migrations: Good post by David Hayden that covers the new database migrations support within EF 4.3 which allows you to easily update your database schema during development - without losing any of the data within it. Visual Studio What's New in Visual Studio 11 Unit Testing: Nice post by Peter Provost (from the VS team) that talks about some of the great improvements coming to VS11 for unit testing - including built-in VS tooling support for a broad set of unit test frameworks (including NUnit, XUnit, Jasmine, QUnit and more) Hope this helps, Scott

Read the article

Creating a Build Definition using the TFS 2010 API

- by Jakob Ehn

In this post I will show how to create a new build definition in TFS 2010 using the TFS API. When creating a build definition manually, using Team Explorer, the necessary steps are lined out in the New Build Definition Wizard: So, lets see how the code looks like, using the same order. To start off, we need to connect to TFS and get a reference to the IBuildServer object: TfsTeamProjectCollection server = newTfsTeamProjectCollection(newUri("http://<tfs>:<port>/tfs")); server.EnsureAuthenticated(); IBuildServer buildServer = (IBuildServer) server.GetService(typeof (IBuildServer)); General First we create a IBuildDefinition object for the team project and set a name and description for it: var buildDefinition = buildServer.CreateBuildDefinition(teamProject); buildDefinition.Name = "TestBuild"; buildDefinition.Description = "description here..."; Trigger Next up, we set the trigger type. For this one, we set it to individual which corresponds to the Continuous Integration - Build each check-in trigger option buildDefinition.ContinuousIntegrationType = ContinuousIntegrationType.Individual; Workspace For the workspace mappings, we create two mappings here, where one is a cloak. Note the user of $(SourceDir) variable, which is expanded by Team Build into the sources directory when running the build. buildDefinition.Workspace.AddMapping("$/Path/project.sln", "$(SourceDir)", WorkspaceMappingType.Map); buildDefinition.Workspace.AddMapping("$/OtherPath/", "", WorkspaceMappingType.Cloak); Build Defaults In the build defaults, we set the build controller and the drop location. To get a build controller, we can (for example) use the GetBuildController method to get an existing build controller by name: buildDefinition.BuildController = buildServer.GetBuildController(buildController); buildDefinition.DefaultDropLocation = @\\SERVER\Drop\TestBuild; Process So far, this wasy easy. Now we get to the tricky part. TFS 2010 Build is based on Windows Workflow 4.0. The build process is defined in a separate .XAML file called a Build Process Template. By default, every new team team project containtwo build process templates called DefaultTemplate and UpgradeTemplate. In this sample, we want to create a build definition using the default template. We use te QueryProcessTemplates method to get a reference to the default for the current team project //Get default template var defaultTemplate = buildServer.QueryProcessTemplates(teamProject).Where(p => p.TemplateType == ProcessTemplateType.Default).First(); buildDefinition.Process = defaultTemplate; There are several build process templates that can be set for the default build process template. Only one of these are required, the ProjectsToBuild parameters which contains the solution(s) and configuration(s) that should be built. To set this info, we use the ProcessParameters property of thhe IBuildDefinition interface. The format of this property is actually just a serialized dictionary (IDictionary<string, object>) that maps a key (parameter name) to a value which can be any kind of object. This is rather messy, but fortunately, there is a helper class called WorkflowHelpers inthe Microsoft.TeamFoundation.Build.Workflow namespace, that simplifies working with this persistence format a bit. The following code shows how to set the BuildSettings information for a build definition: //Set process parameters varprocess = WorkflowHelpers.DeserializeProcessParameters(buildDefinition.ProcessParameters); //Set BuildSettings properties BuildSettings settings = newBuildSettings(); settings.ProjectsToBuild = newStringList("$/pathToProject/project.sln"); settings.PlatformConfigurations = newPlatformConfigurationList(); settings.PlatformConfigurations.Add(newPlatformConfiguration("Any CPU", "Debug")); process.Add("BuildSettings", settings); buildDefinition.ProcessParameters = WorkflowHelpers.SerializeProcessParameters(process); The other build process parameters of a build definition can be set using the same approach Retention Policy This one is easy, we just clear the default settings and set our own: buildDefinition.RetentionPolicyList.Clear(); buildDefinition.AddRetentionPolicy(BuildReason.Triggered, BuildStatus.Succeeded, 10, DeleteOptions.All); buildDefinition.AddRetentionPolicy(BuildReason.Triggered, BuildStatus.Failed, 10, DeleteOptions.All); buildDefinition.AddRetentionPolicy(BuildReason.Triggered, BuildStatus.Stopped, 1, DeleteOptions.All); buildDefinition.AddRetentionPolicy(BuildReason.Triggered, BuildStatus.PartiallySucceeded, 10, DeleteOptions.All); Save It! And we’re done, lets save the build definition: buildDefinition.Save(); That’s it!

Read the article

Remotely Schedule and Stream Recorded TV in Windows 7 Media Center

- by DigitalGeekery

Have you ever been away from home and suddenly realized you forgot to record your favorite program? Now Windows 7 Media Center, users can schedule recordings remotely from their phones or mobile devices with Remote Potato. How it Works Remote Potato installs server software on the host computer running Windows 7 Media Center. Once the software is installed, we’ll need to do some port forwarding on the router and setup an optional dynamic DNS address. When setup is completed, we will access the application through a web based interface. Silverlight is required for Streaming recorded TV, but scheduling recordings can be done through an HTML interface. Installing Remote Potato Download and install Remote Potato on the Media Center PC. (See download link below) If you plan to stream any Recorded TV, you’ll also want to install the streaming pack located on the same page. It isn’t required to stream all shows, only shows that require the AC3 audio codec. Click Yes to allow Remote Potato to add rules to the Windows Firewall for remote access. You’ll likely need to accept a few UAC prompts. When notified that the rules were added, click OK. Remote Potato will then prompt you to allow administrator privileges to reserve a URL for it’s web server. Click Yes. Remote Potato server will start. Click on the configuration button at the right to to reveal the settings tabs. One the General tab, you’ll have the option to run Remote Potato on startup and minimized in the System Tray. If you’re running Media Center on a dedicated HTPC, you’ll probably want to enable both startup options. Forwarding Ports on Your Router You’ll need to forward a couple ports on your router. By default, these will be ports 9080 and 9081. In this example we’re using a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Applications & Gaming Tab, and then the Port Range Forward tab. Under Application, type in a name of your choosing. In both the Start and End boxes, type the port number 9080. Enter the local IP address of your Media Center computer in the IP address column. Click the check box under Enable. Repeat the process on the next line, but this time use port 9081. When finished, click the Save Settings button. Note: It’s highly recommended that you configure the home computer running Media Center & Remote Potato with a static IP address. Find your IP Address You’ll need to find the IP address assigned to your router from your ISP. There are many ways to do this but a quick and easy way is to visit a site like checkip.dyndns.org (link available below) The current external IP address of your router will be displayed in the browser. Dynamic DNS This is an optional step, but it’s highly recommended. Many routers, such as the Linksys WRT54GL we are using, support Dynamic DNS (DDNS). What Dynamic DNS allows you to do is affiliate your home router’s external IP address to a domain name. Every time your home router is assigned a a new IP address by your ISP, the domain name is updated to point to your new IP address. Remote Potato’s user interface is accessed over the Internet is by connecting to your router’s IP address followed by a colon and the port number. (Ex: XXX.XXX.XXX.XXX:9080) Instead of constantly having to look up and remember an IP address, you can use DDNS along with a 3rd party provider like DynDNS.com, to sign up for a free domain name and configure it to be updated each time your router is assigned a new IP address. Go to the DynDNS.com website (See link at the end of the article) and sign up for a free Domain name. You’ll need to register and confirm by email. Once you’ve signed in and selected your domain name click Activate Services. You’ll get a confirmation message that your domain name has been activated. On the Linksys WRT54GL click on the Setup tab an then DDNS. Select DynDNS.org, or TZO.com if you prefer to use their service, from the drop down list. With DynDNS, you’ll need to fill in your username and password you signed up with at the DynDNS website and the hostname you chose. Note: You can connect over your local network with the IP Address of the computer running Remote Potato followed by a colon and the port number. Ex: 192.168.1.2:9080 Logging in Remote Potato and Recording a Show Once you connect, you’ll see the start page. To view the TV listings, click on TV Guide. You’ll then see your guide listings. There are a few ways to navigate the listings. At the top left, you can click on any of the preset time buttons to jump to the listings at that time of the day. Click on the arrows to the right and left of the day and date at the top center to proceed to the previous or next day. Or, jump to a specific day with the date and date buttons at the top right. To setup a recording, click on a program. You can choose to record the individual show or the entire series by clicking on Record Show or Record Series. Remote Potato on Mobile Devices Perhaps the coolest feature of Remote Potato is the ability to schedule recording from your phone or mobile device. Note: For any devices or computers without Silverlight, you will be prompted to view the HTML page. Select Browse Listings. Select your program to record. In the Program Details, select Record Show to record the single episode or Record Series to record all instances of the series. You will then see a red dot on the program listing to indicate that the show is scheduled for recording. Streaming Recorded TV Click on Recorded TV from the home screen to access your previously recorded TV programs. Click on the selection you wish to stream. Click on Play. If you receive this error message, you’ll need to install the streaming pack for Remote Potato. This is found on the same download page as installation files. (See link below) The Begin from slider allows you to start playback from the start (by default) or a different time of the program by moving the slider. The Quality (bitrate) setting allows you to choose the quality of the playback. We found the video quality on the Normal setting to be pretty lousy, and Low was just pointless. High was the best overall viewing experience as it provided smooth quality video playback. We experienced significant stuttering during playback using the Ultra High setting. Click Start when you are ready to begin. When playback begins you’ll see a slider at the top right. Move the slider left or right to increase or decrease the size of the video. There’s also a button to switch to full screen. Media Center users who travel frequently or are always on the go will likely find Remote Potato to be a blessing. Since being released earlier this year, updates for Remote Potato have come fast and furious. The latest beta release includes support for streaming music and photos. If you like those nice network TV logos, check out our article on adding TV channel logos to Windows Media Center. Downloads and Links Download Remote Potato and Streaming Pack Find your IP address Sign Up for a Domain Name at DynDNS.com Similar Articles Productive Geek Tips Schedule Updates for Windows Media CenterUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Add a Sleep Timer to Windows 7 Media CenterStartup Customizations for Media Center in Windows 7Enable Media Streaming in Windows Home Server to Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos

Search Results

Search found 22332 results on 894 pages for 'internet explorer 8'.

Page 674/894 | < Previous Page | 670 671 672 673 674 675 676 677 678 679 680 681 | Next Page >

- by DigitalGeekery

- by DigitalGeekery

- by BuckWoody

- by ScottGu

- by andrewbrust

- by mbcrump

- by Michael Hylton

- by Michael Snow

- by user104195

- by Chris Hoffman

- by Magnus Karlsson

- by rgillen

- by Chris Hoffman

- by Jason Fitzpatrick

- by Bill Graziano

- by Re-Invent

- by Francisco Tirado

- by Rnd_d

- by AndyRoid

- by omatrot

- by user325320

- by ScottGu

- by Jakob Ehn

- by DigitalGeekery

< Previous Page | 670 671 672 673 674 675 676 677 678 679 680 681 | Next Page >