Search Results

Search found 22480 results on 900 pages for 'internet archive'.

Page 678/900 | < Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >

• Does Juniper Networks provide keyloggers with their software?

  - by orokusaki

  I noticed that I had a "USB Mass Storage Device" plugged in when there wasn't in fact anything plugged in to any USB port. I turned it off via Windows (XP), but it's quite concerning. This was after installing Juniper Networks' software for VPN access to an IT guy's stuff. I also notice there is a service called "dsNcService.exe" which apparently is sending information over the internet (even when I'm not in VPN access). The process restarts itself when I end it. Should I be worried that this software is tracking my keystrokes and broadcasting them to my IT guy?

  Read the article

• Monitor HTTP usage on network from Linux free

  - by David

  I manage a small office network. I am looking to start monitoring/logging internet usage (website requests) for each user on a small network. All the windows clients are running through a switch to a BT router. I also have a linux (centos) machine which is connected as a client to the BT router as well. Is there any free software I can install on the linux box (or my own machine) to allow me to log and monitor websites requested by users kind of like browser history. Ideally, something that would collect each client's browser history in 1 place. Thanks

  Read the article

• Bandwidth sizing for simultaneous RDP sessions

  - by Gareth Marlow

  We're doing some DR scenario planning which will require up to 150 users to RDP into their desktop machines (mainly running Windows XP) over our VPN. We have a 2mbit uncontended internet connection at the moment but there's scope to upgrade this and also to use a secondary SDSL line to give us more bandwidth. Typical bandwidth figures I've seen suggest to plan for 64kbps per session, which works out to 9.6mbps in total. I'd like to know: Does anyone have any real-world data which would support these estimates? Are there any operational 'gotcha's that we need to be aware of? Thanks!

  Read the article

• How to Setup Your Verizon FIOS Router with OpenDNS or Google DNS

  - by The Geek

  Are you still using your service provider’s DNS servers? You might have heard about Comcast’s DNS servers dying and taking down the internet for anybody not using the more reliable OpenDNS or Google DNS. Here’s how to set it up on your Verizon FIOS router for every device on your network. There’s lots of other reasons to use OpenDNS or Google DNS other than just their rock-solid reliability—they are often much faster than your ISP’s DNS server, and in the case of OpenDNS, there’s loads of extra features like content filtering, typo correction, anti-phishing, and child protection controls. If you’re using Windows, be sure and check out some of our other articles on the subject: Speed Up Your Web Browsing with Google Public DNS Easily Add OpenDNS To Your Router Protect Your Kids Online Using Open DNS Otherwise, keep reading for how to set it up on your router. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Deathwing the Destroyer – WoW Cataclysm Dragon Wallpaper Drag2Up Lets You Drag and Drop Files to the Web With Ease The Spam Police Parts 1 and 2 – Goodbye Spammers [Videos] Snow Angels Theme for Windows 7 Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser

  Read the article

• How to create an Ubuntu 12.10 live CD?

  - by B Biswas

  I downloaded the Ubuntu 12.10 installer from Ubuntu website. However, I find that it is not an iso image and I am unable to create a live CD (or DVD) from it. I could not find any help from Ubuntu website as well as internet. Please help. PS - My OS is Windows XP. The Ubuntu installer I downloaded from Ubuntu website is a zip file. I unzipped the file and it has a wubi file. PS - Thanks. I could create a Live CD. 1) First I tried to do it in my laptop which has Win 7. It was showing the Ubuntu installer as a zip file and could not able to burn it in to a DVD. At that time I raised the question. 2) Later I copied the installer in my desktop which has Win XP. There the installer is shown as an ISO file and I burnt it in to a DVD and created the Live CD. This is working nicely in the the desktop. 3) I tried to run the Live Cd in my Laptop which is an AMD machine, the system does not boot up. 4) In my office desktop which has Win 7 the Ubuntu installer is showing as an ISO file. My questions are as follows: A) Why the Ubuntu installer file is showing differently in different machines? B) Why the Live CD is not working in my Laptop?

  Read the article

• How do I send email in plain text rather than HTML in my email client?

  - by JS Bangs

  For various reasons, I often have to help friends and family to send email in plain text rather than HTML. However, many of them use email clients that I'm not familiar with, forcing me to search the internet, read help files, or click randomly through dialogs looking for the setting. I've often wished there was a single page that included instructions for changing this setting for every popular email client. So let's make one. Write instructions for changing email settings from plain text to HTML in your preferred email client below. If someone else has already done so, please upvote their description so that the most used email clients rise to the top. (For obvious reasons, there won't be an "accepted answer" for this question. I'll set this question to community wiki after a few days.)

  Read the article

• DNS resolution Windows 7 & browsing to locally hosted web site

  - by Aidan Whitehall

  We host two Intranet sites, http://intranet/ and http://sales.intranet/, both on the same server on the LAN. Local DNS (a Windows 2003 Server) was updated and both hostnames are configured to be CNAMEs that point to the FQDN name of the server on which they're hosted. On the LAN, Windows XP Professional clients can browse to both sites. However, Windows 7 Professional clients can browse to the main Intranet site, but not the Sales Intranet (neither using Firefox 3 nor Internet Explorer 8). Using nslookup on the command line on the Windows 7 boxes, intranet and sales.intranet both correctly resolve as CNAMEs of the server hosting them, and that in turn correctly resolves to the host's IP address. So the Q is... can anyone think why this might be, or what test to try next? Thank you for any suggestions!

  Read the article

• Run a batch file silently, executed at remote desktop login

  - by ILMV

  In our office we are using Linux thin client machines, they work very well except the lack of IE, which is a pain because the corporations we deal with are too stupid to update their web apps (no flame wars please). To solve this problem we have machine in our computer room which users remote desktop into to access internet explorer, this is achieved by running a batch script which opens IE and when it closes logs them off, this setup works well for us. Even though I have @echo off and the cmd window isn't displaying anything, I would really like that batch file to be executed silently, so the cmd window doesn't appear at all. Is this possible? The Ubuntu terminal server client has an option to launch a file / app at login, is there a command I can use to run this batch silently. I have tried these: C:\my_batch.bat /NOCONSOLE C:\my_batch.bat /NOWINDOW C:\my_batch.bat /B C:\my_batch.bat /Q ...with no success, perhaps it's the way I am doing it? Cheers :-) Edit The remote desktop platform is a Windows XP machine, nothing entirely special but not a Windows Server setup.

  Read the article

• Messenger Thinks My Ip is Invalid

  - by Umut Benzer

  Hello. I am using Windows Live Messenger 2009 on Windows 7. I am using a 3G modem (ZTE Propietary USB Modem) I connect to the Internet using a software my ISP provided me. In last three days, my Messenger started to disconnect. Here is what I observed and tried to do: 1- I can browse web, can do FTP transfer etc. and obiviously have a valid IP. 2- I can sign in to Messenger (appear offline) but when I change my status to anything other then appear offline, Messenger says my connection to service has been lost. (However, it exists.) 3- When I run, MSN Connection Troubleshooter, it says my IP is invalid. When I click repair, it says repaired and just after that, I run the troubleshooter again, and it says my IP is invalid again. (However, it is valid and I am browsing the net.) 4- If I connect the Internet through eterhet or wireless there is no problem at all. 5- I re-installed Messenger (deleting all settings manually through registry and folders), re-installed all drivers and software related to USB 3G Modem. It doesn't work. And then, I took a full backup then formatted entire computer, installed a fresh windows 7, after 5 minutes, the same problem occured. What do you recommend? What can I do? Addition As seen on screenshot, it says Server IPv4 adress is 0.0.0.0 It seems like a problem, I don't know if it is. If it is, how can I solve it? Here is what I get, when I netstat. PPP adapter TTNET internet: Connection-specific DNS Suffix . : IPv4 Address. . . . . . . . . . . : 217.174.39.122 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 0.0.0.0 Wireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : ege.edu.tr Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 16: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 13: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter 6TO4 Adapter: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 12: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 14: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 17: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 25: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 20: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 18: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 19: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 22: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 21: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 15: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 23: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e74:2448:3909:2a2c:eb7b Link-local IPv6 Address . . . . . : fe80::2448:3909:2a2c:eb7b%30 Default Gateway . . . . . . . . . : Tunnel adapter Local Area Connection* 24: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{CFFCFEDB-6B53-42E0-B091-548B9ADE9C9D}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 26: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 27: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 29: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 31: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 28: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 32: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2002:d9ae:277a::d9ae:277a Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301 Tunnel adapter Local Area Connection* 30: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{157CF713-B3AC-4701-87A9-14C23CA60AAB}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.ege.edu.tr: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{0D3CD01B-0993-4B37-89B8-12557ECF484D}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

  Read the article

• Since a few days, Dropbox stopped syncing

  - by Fabio

  Theres a new problem with nautilus-dropbox and is the worst for a service like Dropbox: stopped syncing and their tech support don't believe their users. The problem is: start dropbox it downloads index creates folders start to download files stop downloading files or the speed is like 0.3k/seg even deleting everything doesn't work, even syncing a single folder with a few files, not even configuring a different limit speed or let all your bandwith, nothing works for me and i have found many users with the same problem. it's strange, i have two computers with ubuntu 14.04 and one with windows 7, and in one of the linux machines it works fine, but not in the other one. Both of them are x64. The answers from the tech support starts with "delete everything and reinstall" to "you may be blocking port 443", yeah, sure (and if i do that half of internet dissapears, idiot), but nothing works. Someone has some idea? i cant find any log file (at least a text log file like in /var/log) to understand what is dropbox doing and what is not working. PS: sorry for my "english", is not my language Examples: dropbox slow on ubuntu 14.04 Dropbox does not sync on ubuntu 14.04 Dropbox Status (in spanish but is the same thing) fabio@canopus:~$ dropbox status Sincronizando (Quedan 330 archivos., Faltan 9 días.) Descargando 330 archivos... (0,3 KB/s, Faltan 9 días.) 9 days for 330 files / 100Mb

  Read the article

• Read Wall Street Journal for free using Google Search

  - by Gopinath

  Wall Street Journal publishes very informative articles and most of them are available for paid subscribers. But it is very easy to defeat the pay wall of Wall Street Journal and read the articles for free with the help of Google. The trick is to Google for Wall Street Journal article and click the link displayed on search results to read the article for free. It’s very simple and easy if you are using Google Chrome browser, but it should be straight forward in Firefox and Internet Explorer. Here is a walk through of unlocking today’s Wall Street Journal paid article   1. When you are on online.wsj.com, select the title of subscribers only article you want to read 2. Right on the selected title and choose the option Search Google for “<article title>” 3. Locate the WSJ article on Google search results and click on the article link   4. Boom! You got full access to the article and enjoy reading it for free.   I’ve been using this trick for a while from US to access WSJ articles for free. Most likely this should work for users located outside USA as well.

  Read the article

• Setting up a static IP address (public) in Ubuntu

  - by ycseattle

  I have a business class internet connection and need to setup a static ip address for a machine. I did a search online and only find how to setup static local ip addresses (like 192.168..). I tried the same technique, and only setup the ip address and netmask, but after restart networking the computer could not connect to the outside world. This is what I did: 1) edit /etc/network/interfaces iface eth0 inet static address 173.10.xxx.xx netmask 255.255.255.252 2) edit /etc/resolv.conf search wp.comcast.net nameserver xx.xx.xx.xxx nameserver xx.xx.xx.xxx 3) restart network sudo /etc/init.d/networking restart Now the last step didn't report error, ifconfig shows the ip address was set, but this server cannot connect to outside world, ping google.com and reports "unknown host google.com". Any ideas?

  Read the article

• Could not Upload file in network mapped drive using asp.net/vb.net

  - by Hasan

  I have tried several times to upload file remotely to a mapped network drive, but it is raising an exception: Could not find a part of the path 'X:\test\testing.wav'. I read through various internet /blog/ Microsoft help sites, but I still don't know what is wrong. Does anyone know what is causing this problem and how I can correct it? It works fine when I am uploading to a local drive as a test. It is also working When I am running the code from the development server, but if I try with published code, then it fails. :(

  Read the article

• NIS client cannot find NIS server (Opensuse)

  - by Tony

  I installed NIS server on head node of a virtual cluster(VirtualBox). One of the node (let's say node-1) can find NIS server and work with it, but another node (node-2) just can't find the NIS server in Yast while it can ping and ssh to both head node and node-1. BTW, all the nodes are VMs, head node and node-1 are on the same physical machine, node-2 is on another physical machine. I set the domain name in /etc/hosts and /etc/yp.conf, and ypwhich sometimes gives the correct domainname several minutes later complains about "ypwhich: Can't communicate with ypbind", and will back to work after some time. Also tried rpcinfo -p hostname and it worked as expected. I almost tried every thing I can find on internet, but seems that not many people had this problem. Any help would be very appreciated.

  Read the article

• The Splendiferous Array of Culinary Tools [Infographic]

  - by ETC

  If your geeking out extends from the workbench to the kitchen counter, you’ll love this swanky infographic detailing the families of utensils in your kitchen drawers and cupboards. The poster showcases everything from scissors to strainers in a retro-style poster. If you can find a culinary tool in your kitchen that isn’t on the chart then you’re obviously a culinary wizard of the highest order. You can hit up the link below to check out the poster in full-size and downloadable glory or head over to the design company that created it here (and pre-order a printed copy for your kitchen). A Complete Guide to Your Kitchen Tools [Fast Co. Design via Design Sponge] Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware The Splendiferous Array of Culinary Tools [Infographic] Add a Real-Time Earth Wallpaper App to Ubuntu with xplanetFX The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker

  Read the article

• Full speed internal switch bandwidth but per-port set external bandwidth?

  - by garg

  I am in an environment where all the machines are behind a switch that I don't have access to. Each ethernet wall port has limited bandwidth depending on how much has been paid for each port. The problem is that some people have 10Mbps connections and some have 100Mbps connections and this causes problems with local intranet file transfers and operating system/software deployments. Operating systems can take hours to be deployed if the machine is on 10mbps. Do you know if it is possible with most switches to set a rule that would limit bandwidth coming in/going out to an extranet, but keep full bandwidth if the packets are destined to go to a local machine? For example, the internet might be limited to 10Mbps, but internal servers would get gigabit speeds? Thanks

  Read the article

• Audio input problem in Ubuntu 9.10

  - by Andrea Ambu

  My audio input is a mix of my mic output and my sound card output. I'd like it to be just my mic output. I was able to do so in Ubuntu 9.04 but the interface is 9.10 is totally changed and I tried every my creativity was able to think. It's really annoying when talking to other people over the internet because they keep hearing their voice back. I'm not sure I explained it in clear way so I'll give you an example: What I do: I put an mp3 on play or a video on youtube then open a recorder and start to talk on my mic. What happens: both my voice and audio from mp3/youtube get reordered, even if I put headphones volume to 0 (via hardware). What I'd like to happen: Only my voice should be recorded. I'm sure I'm missing some technical term, but that's the problem and I'd like to solve it in Ubuntu 9.10, any idea?

  Read the article

• ssh port forwarding / security risk

  - by jcooper

  Hi there, I want to access a web application running on a web server behind my office firewall from an external machine. We have a bastion host running sshd that is accessible from the Internet. I want to know if this solution is a bad idea: Create an account on the bastion host with shell=/bin/false and no password ('testuser') Create a ssh RSA key on the external machine Add the public RSA key to the testuser's authorized_keys file ssh to the bastion host from the external host using: ssh -N 8888:targethost:80 run my tests from the external host shut down the ssh tunnel I understand that if my RSA private key were compromised then someone could ssh to the bastion host. But are there other reasons this solution is a bad idea? thank you!

  Read the article

• Howto return to virtual machine when remote desktop hangs?

  - by tangens

  I'm using a vmware virtual machine running ubuntu linux and from there I connect to a Windows XP machine using rdesktop through a VPN tunnel. This configuration is given and cannot be changed. From time to time my internet connection does a reconnect. Then the running rdesktop (running in fullscreen mode) process freezes and isn't usable anymore. Now I want to return to the underlying linux and restart the rdesktop process. But I'm not able to get out of fullscreen rdesktop mode and so I cannot access the ubuntu desktop to kill any process. My solution is to reboot the vmware and start the rdesktop again. Is there a better way to get the configuration running again after a freeze? EDIT: I have no admin rights for the linux system. Everything must be done with user rights.

  Read the article

• What are Information Centers?

  - by user12244613

  Information Centers are similar to product pages in the Oracle Sun System Handbook Many customers like the Oracle Sun System Handbook concept of a home page with all the product attributes, troubleshooting etc. access from a single home page. This concept is now available for a range of Oracle Solaris, Systems, and Storage products. The Information Center for each product covers areas such as: Overview, Hot Topics, Patching and Maintenance. The Information Center pages are dynamically generated each night to ensure the latest content is available to you. Here are the top Solaris, Systems, and Storage Information Centers: Oracle Explorer Data Collector Oracle Solaris 10 Live Upgrade Oracle Solaris 11 Booting Information Center Oracle Solaris 11 Desktop and Graphics Information Center Oracle Solaris 11 Image Packaging System (IPS) Information Center Oracle Solaris 11 Installation Information Center Oracle Solaris 11 Product Information Center Oracle Solaris 11 Security Information Center Oracle Solaris 11 System Administration Information Center Oracle Solaris 11 Zones Information Center Oracle Solaris Crash Analysis Tool(SCAT) - Information Center Oracle Solaris Cluster Information Center Oracle Solaris Internet Protocol Multipathing (IPMP) Information Center Oracle Solaris Live Upgrade Information Center Oracle Solaris ZFS Information Center Oracle Solaris Zones Information Center CMT T1000/T2000 and Netra T2000 CMT T5120/T5120/T5140/T5220/T5240/T5440 Systems M3000/M4000/M5000/M8000/M9000-32/M9000-64 Management and Diagnostic Tools for Oracle Sun Systems Netra CT410/810 and Netra CT900 Network-Attached Storage (NAS) Oracle Explorer Data Collector Oracle VM Server for SPARC (LDoms) Pillar Axiom 600 SL3000 Tape Library Sun Disk Storage Patching and Updates Sun Fire 3800/4800/4810/6800/E2900/E4900/E6900/V1280 - Netra 1280/1290 Sun Fire 12K/15K/E20K/E25K Sun Fire X4270 M2 Server Sun x86 Servers T3 and T4 Systems Tape Domain Firmware V210/V240/V440/V215/V245/V445 Servers VSM (VTSS/VLE/VTCS)

  Read the article

• Tortoise SVN Error Validating Server Certificate

  - by theplatz

  I just updated the certificate on one of my sites due to the old one expiring. The new certificate verifies fine in Internet Explorer 9, Chrome, and Firefox 4 - but when trying to browse/check out the repository with TortoiseSVN, I get the following error: Error validating server certificate for https://xxx.xxx.com:443: Unknown certificate issuer. Fingerprint: 96:b3:fa:19:bd:4a:ec:c2:bc:19:33:b8:25:2a:0a:47:28:41:07:d0 Distinguished name: (c) 2009 Entrust, Inc., www.entrust.net/rpa is incorporated by reference, Entrust, Inc., US Do you want to proceed? Accept permanently | Accept once | Reject Clicking Accept permanently will work, but this is less than ideal. This problem seems to be related to TortoiseSVN and not the certificate, which checks out fine at http://sslinstallcheck.entrust.net/SIC/jsp/MainWebAddress.jsp and http://www.digicert.com/help/. Any ideas on what could be wrong?

  Read the article

• verisign certificate into jboss server SSL

  - by rfders

  Hi all, i'm trying to enable jboss to uses ssl protocol using a previously generated certificate from verisign, i imported both certificate, server certificate and ca certificate into the keytore file, and i configured the server.xml to use that keystore and activate ssl protocol, then when i run the jboss, I got this error "certificate or key corresponds to the SSL cipher suites which are enabled" Question, reading some post on internet, i found that every example was made it generating a Certificate Request, it stricly necesary to do that if i already have the server certificate and that CSR has to be imported into the keystore as well ? at this point i'm very confused about this issue, i tried almost every solutions posted in several forums but till now i haven't any luck !! can you give me some tips in order to solve this problem. thanks in advance this are my keystore file: Keystore type: jks Keystore provider: SUN Your keystore contains 2 entries j2ee, Dec 29, 2009, trustedCertEntry, Certificate fingerprint (MD5): 69:CC:2D:2A:2D:EF:C4:DB:A2:26:35:57:06:29:7D:4C ugent, Dec 29, 2009, trustedCertEntry, Certificate fingerprint (MD5): AC:D8:0E:A2:7B:B7:2C:E7:00:DC:22:72:4A:5F:1E:92 and my server.xml configuration:

  Read the article

• Setup a DNS wilcard and MX record in the same zone

  - by Nicolas BADIA

  I'd like to know how to configure my DNS to be able to use a wildcard for my domain and an MX record together. Here is what I've done: @ IN SOA dns100.ovh.net. tech.ovh.net. (2012052100 86400 3600 3600000 300) IN NS ns100.ovh.net. IN NS dns100.ovh.net. IN MX 1 mail.gestixi.com. IN A 91.121.39.211 * IN CNAME gestixi.com. www IN CNAME gestixi.com. The problem is that when I check my DNS, I get this error: MX records shall not point to an alias defined by a CNAME Because of this error, it look like I can't send mails from some internet providers.

  Read the article

• Insert Special Characters & Coding in Online Forms in Firefox

  - by Asian Angel

  If you are active in forums or comment areas on different websites then you most likely use some type of special characters, HTML, or other code throughout the day. Now you can easily insert commonly used “items” with the SKeys extension for Firefox. Your New Special Text Edit Bar After installing the extension you will see the new toolbar that has been added to your browser. These are the kinds of text that can be added to online comment areas, forums, or other website areas that allow their use: Special characters HTML tags BB codes Wiki characters All that you will need to do is click on the appropriate special character or code to insert it into the website text area. The first two toolbar items are each singular in their function and insert the following types of text. A look at the special characters available for your use. The wiki code menu. The HTML menu… And the BB code menu. Here is a quick sample using the HTML menu…much better than doing it manually. This should definitely help speed things up throughout the day. Our only disappointment during testing was not being able to add additional items (i.e. characters, tags) to the toolbar at this time. Conclusion While a new toolbar may not be for everyone this extension can certainly prove useful when you need to quickly add special characters or coding in website text areas. Links Download the SKeys extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Quick Tip: Use Tab Characters in Textarea Boxes in FirefoxUse Special Characters in WindowsUsing Password Phrases For Better SecuritySearch For Rows With Special Characters in SQL ServerExpand Text Areas in Web Forms in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Insert Special Characters & Coding in Online Forms in Firefox

  - by Asian Angel

  If you are active in forums or comment areas on different websites then you most likely use some type of special characters, HTML, or other code throughout the day. Now you can easily insert commonly used “items” with the SKeys extension for Firefox. Your New Special Text Edit Bar After installing the extension you will see the new toolbar that has been added to your browser. These are the kinds of text that can be added to online comment areas, forums, or other website areas that allow their use: Special characters HTML tags BB codes Wiki characters All that you will need to do is click on the appropriate special character or code to insert it into the website text area. The first two toolbar items are each singular in their function and insert the following types of text. A look at the special characters available for your use. The wiki code menu. The HTML menu… And the BB code menu. Here is a quick sample using the HTML menu…much better than doing it manually. This should definitely help speed things up throughout the day. Our only disappointment during testing was not being able to add additional items (i.e. characters, tags) to the toolbar at this time. Conclusion While a new toolbar may not be for everyone this extension can certainly prove useful when you need to quickly add special characters or coding in website text areas. Links Download the SKeys extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Quick Tip: Use Tab Characters in Textarea Boxes in FirefoxUse Special Characters in WindowsUsing Password Phrases For Better SecuritySearch For Rows With Special Characters in SQL ServerExpand Text Areas in Web Forms in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

< Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >