Search Results

Search found 25811 results on 1033 pages for 'visual studio 2008'.

Page 678/1033 | < Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >

• which performance counters mainly matter for windows server performance?

  - by Karl Cassar

  We have a website which is sometimes performing slowly, and / or completely hangs. I have setted up temporarily the default system performance data collector in Performance Monitor, to see if this can shed some light. However, the default Data Collector set collects a huge amount of counters, as well as generates huge logs files. Just 8 hours of data resulted in 4GB of data. Which performance counters matter the most, when judging server load? Also, is it a performance concern if one leaves such data-collectors running indefinitely? Obviously, I will not know when the server will experience slow performance, so I need the logs there so that I can check them out. Any other specific guidelines on monitoring server performance would be greatly appreciated. OS is a Windows Server 2008 R2 (Web Edition).

  Read the article

• What's causing Remote Access error 807 using rasdial.exe to connect to a PPTP VPN?

  - by Dylan Beattie

  I'm using rasdial.exe to connect an offsite server to our VPN. Remote box is a Windows 2008 x64 server; the VPN host at this end is a Watchguard Firebox x750e running Fireware 10.2 It connects fine about 20-30% of the time. The rest of the time I get: Remote Access error 807 - The network connection between your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. Please try to reconnect to the VPN server. If this problem persists, contact the VPN administrator and analyze quality of network connectivity. For more help on this error: Type 'hh netcfg.chm' In help, click Troubleshooting, then Error Messages, then 807 The VPN isn't full, and it's 100Mb dedicated fibre on both ends so I can't believe it's a connectivity issue - especially since I'm RDP'ed into the remote box whilst trying to do this! Any bright ideas as to what might be causing the problem? Thanks, Dylan

  Read the article

• Mac OS can't connect to SMB shares after sleep

  - by Andreas

  I used to access my local Windows 2008 file server's SMB shares on my recent (3 weeks old) MacBook Pro without problems. However, for a few days now, it fails to (re-)connect to the server after it woke up from sleep mode. Finder just shows "connecting..." and hangs indefinitely. The same thing happens when I try it from the command line (mount -t smbfs). This happens via both WiFi and cable, I also tried turning networking off and back on. The only thing that helps is a reboot. Any hints?

  Read the article

• How to preserve sysprep from changing Default User settings

  - by user33794

  I'm having diffculties configuring 20 new Dell Vostro minis here. I set up one of them with my preferred OS, applications and settings, especially the Visual Effects Settings of Windows XP. I set them to best performance and deactivated everything else in the box. I copied this profile to Default User Profile and did sysprep -mini -reseal. After capturing this image and deploying it again, the desktop settings are correct except the visual effects settings. fading and everything else is reenabled for each new user which is created on the system. How do I preserve my settings from being overwritten by sysprep? thanks!

  Read the article

• Using a TS-Gateway through a Apache reverse-proxy

  - by Helder

  Hey all, I've set up a Windows 2008 server as Terminal Services Gateway, to funnel the RDP access to a bunch of backend servers. However, since I only need to publish SSL to the "outside", I've tried to publish it with our reverse proxy, but it's not working. The Apache box is timing out, while trying to reach the tsgateway. However, if I ping it straight from the same box, there is connectivity. I've read a bit, and with ISA 2006 you can publish TS-Gateways on the internet, so I was wondering it anyone ever got it working with an Apache reverse proxy instead :)

  Read the article

• Disable static content caching in IIS 7

  - by Lee Richardson

  I'm a developer having what should be a relatively simple problem in IIS 7 on Windows Server 2008 R2. The problem is that IIS 7 is overzealously caching all static content on the server. It's caching all .html and .js content and not noticing when the content changes on disk unless I iisreset. I've tried the following: Deleting the local cache in my browser (I'm 99% positive this is a server caching issue) In IIS Admin in OutputCaching adding an .html extension and unchecking "User mode caching" and unchecking "Kernel-mode caching" In IIS Admin in OutputCaching adding an .html extension and checking "User mode caching" and selecting the radio for "Prevent all caching" In IIS Admin editing Output Cache Feature settings and unchecking "Enable cache" and "Enable kernel cache under OutputCaching. Running "C:\Windows\System32\inetsrv\config\appcmd set config "SharePoint - 80" -section: system.webServer/caching -enabled:false" Looking through applicationHost.config and disabling anything related to caching I could find. Nothing seems to work. I'm getting very frustrated. Can anyone please help?

  Read the article

• how to extract all permissions that a domain user have on the network

  - by Alexandre Jobin

  I would like to know all the permissions a windows domain user have in my network. Is there a way, with a script file or a tool, that can extract this kind of information by checking all the servers and computers in my network? I'm on a Microsoft network with Windows Server 2008 R2, Windows XP, Windows 7. The report should include these kind of informations: report all permissions that the domain user have (read, write, etc...) if the domain user is in a domain group, tell me the permissions that this group have in my network so the report could be something like this: Permissions for USER_A in the DOMAIN.COM the user is part of theses domain groups: GROUP_A GROUP_B SERVER_A W:\wwwRoot (R/W inherited from GROUP_A) W:\sharedFolder (R) SERVER_B c:\projects (R/W) c:\projects\project_a (R/W) c:\projects\project_b (R/W) c:\dumpfolder (R/W inherited from GROUP_B) COMPUTER_A LOCAL\Administrator c:\ (R/W)

  Read the article

• Can't get PXE boot working on WDS + Linux DHCP server

  - by askvictor

  Hi I'm trying to get WDS to PXE boot some laptops. The university is running a (linux) DHCP server for the entire network; we can't run our own. We can (and have) set options in that DHCP server to point to a tftp server and file (pxeboot.n12 on the WDS server we run). The client seems to get the pxeboot.n12 file (judging by the server logs), but then comes back with 'TFTP download failed Pres any key to reboot'. I've tried running a third-party tftp service on the WDS server, and found that the client pulls the first stage (pxeboot.n12) correctly, but then looks for the second stage (bootmgr.exe) in the root of the tftp folder - whereas WDS places it in \boot\x86\ (or \boot\x64). Similarly, it looks for a file called BCD, which doesn't exist (rather there are a few files scattered around with the extension .bcd). I'm confused if the WDS tftp server does some magic returning certain files, or if I haven't configured it correctly. The server is 2008 R2. Cheers, Victor

  Read the article

• conversion of a VMDK image with qemu-img failed with "error while reading sector 131072: Invalid argument"

  - by Erik Sjölund

  I tried to convert a VMDK image found in a OVA file to the QCOW2 format with the qemu-img command but it failed with the error message qemu-img: error while reading sector 131072: Invalid argument user@ubuntu:/tmp$ wget ftp://ftp.sanger.ac.uk/pub/databases/Pfam/vm/PfamWeb_20120124.ova user@ubuntu:/tmp$ tar xfv PfamWeb_20120124.ova PfamWeb_20120124_2.ovf PfamWeb_20120124_2.mf PfamWeb_20120124_2-disk1.vmdk user@ubuntu:/tmp$ qemu-img convert -O qcow2 PfamWeb_20120124_2-disk1.vmdk PfamWeb_20120124_2.qcow2 qemu-img: error while reading sector 131072: Invalid argument user@ubuntu:/tmp$ qemu-img --version | grep "qemu-img version" qemu-img version 1.0, Copyright (c) 2004-2008 Fabrice Bellard user@ubuntu:/tmp$ dpkg-query -f='${Version}\n' --show qemu-utils 1.0+noroms-0ubuntu14.1 user@ubuntu:/tmp$ cat /etc/issue Ubuntu 12.04.1 LTS \n \l How do I avoid the error?

  Read the article

• Virtual Machine Manager 2012 is showing 0% CPU usage

  - by Mark Henderson

  When trying to do some science to answer this question, I took a Windows 7 guest on a Server 2008 R2 host being managed by SCVMM 2012 and ran Prime95 on it to just generate some CPU usage. Here's the Guest: The Hyper-V host shows 12%, which is 1/8 cores (which is what is allocated), so that's looking correct: But SCVMM is showing 0%: I have left the stress test running for a long time, thinking that maybe SCVMM averages out over a long time (I thought it was 9 minutes, but I've been known to be wrong; just don't tell my wife). Why is SCVMM showing 0% when everything else seems to disagree?

  Read the article

• Configuring IIS7 for TLS 1.0 only

  - by tomfanning

  I have been tasked with configuring an IIS7 server to accept TLS 1.0 HTTPS connections only. I have come up with the following list of cipher suites which I have deduced are TLS 1.0. TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_AES_128_CBC_SHA TLS_DHE_DSS_WITH_AES_256_CBC_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA TLS_RSA_WITH_AES_128_CBC_SHA TLS_RSA_WITH_AES_256_CBC_SHA I have put that list in the box in the following policy: Computer Configuration | Administrative Templates | Network | SSL Configuration Settings | SSL Cipher Suite Order Is that sufficient? Are any of the suites in my list not TLS 1.0? Are there any other TLS 1.0 suites supported by IIS7 that aren't in the list? The server, by the way, is Windows Server 2008 R2. Thanks

  Read the article

• Domain Controllers group not reflected in domain controllers credentials

  - by Molotch

  I set up a small testlab in vbox consisting of four servers. Two domain controllers dc01, dc02, one offline root ca and one online enterprise sub ca, ca01. All servers are based on Windows Server 2008 R2 Standard. Everything works as excpected except one thing. If I issue a certificate template with read, enroll and autoenroll rights to the security group "domain controllers" it does not let dc01 or dc02 to enumerate or enroll for the certificate. I've restarted both domain controllers several times to update their credential tokens with the correct group memberhips. So I added dc01 to the "domain computers" group and gave that group read, enroll and autoenroll rights in the template, bam, the certificate was issued. So my question is, why isn't the domain controllers group memberhips reflected in the domain controllers (dc01 and dc02) credentials? Can I view the computers credentials somehow and how should I go about trying to resolve the issue?

  Read the article

• Basic proxy with OpenSSH, Cygwin, Putty

  - by clang1234

  I know this is probably a common question, but after looking around for a few hours (on this site and others), I can't find a solution. I'm trying to set up a simple proxy. I already have a server running Windows Server 2008. I've installed Cygwin and have OpenSSH installed. I also have sshd (the openssh daemon) running. Port 22 is forwarded correctly. On my client side I have Putty on a Windows 7 machine. I can successfully open a connection to my server and log in to access the shell. So what do I do next? Do I just name the ports I want tunneled in Putty or do I need to tell my SSH server what to do with those ports? Thanks for the help. Let me know if I left anything out.

  Read the article

• L2TP with PEAP authentication from MacOS/iOS

  - by Jose

  Following the recent security advisory, I'm reconfiguring our VPN servers and having trouble. We're using Windows 2008 R2 server for VPN services, running RRAS and NPS on the same server and configure it to use PEAP-EAP-MSCHAPV2 authentiation for all tunnel type(PPTP, L2TP, IKEv2, SSTP), which previously allowed plain MSCHAPv2. But Apple products, MacOS and iOS cannot connect to VPN after this change. I tried to install root certificate used in PEAP transaction but no change. Does anyone know whether MacOS/iOS supports PEAP-EAP-MSCHAPv2 authentication in PPTP/L2TP? If so any tips to make it work? (I know PEAP-EAP-MSCHAPv2 is supported in WPA/WPA2 enterprise) Regards.

  Read the article

• Linux software raid fails to include one device for one RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64. Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the mdadm.conf file: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions? Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1

  Read the article

• Trust my work domain on a Dev Domain without a domain level password

  - by Vaccano

  I setup a virtual machine to host a dev version of TFS (to test plugins on). Getting a computer on my work domain requires large amounts of red tape and paperwork that I would rather not do. I created my own domain the the VM and I would like to trust all users from my work domain on that VM Domain. But when I tried to setup the trust I needed a password from my work domain (which I don't have). Am I trying to do something nefarious? I just want to be able to authenticate to my Test TFS (VM) Server as me (my login on my work domain). Is there a way to do that with out having to have a domain level password for my work domain? (My VM is a Windows Server 2008 R2 server)

  Read the article

• MOSS Upload Size?

  - by littlegeek

  Hi In MOSS we have done all of this to increase the file upload size, reset iis but still doesnt want to play = anyone any advice. UPDATE Just seen the Scott Gu article - http://weblogs.asp.net/pscott/archive/2009/02/26/404-errors-with-fileupload-with-iis7.aspx and JS example http://msmvps.com/blogs/cgross/archive/2009/02/25/large-files-in-sbs-2008-s-companyweb.aspx So need to say this is II6 on win2k3 Update 2 still not working at a loss anyone help? In SharePoint 3.0 Central Adminisration, Application Management tab, and Web application general settings configure the Maximum upload size to a maximum of 2047 MB. - We set ours to 250MB In Internet Information Services on the properties of the virtual server increase the Connection Timeout to greater than default 120 seconds depending on the time to upload large files in your environment for example, 360 seconds. - We set ours to 600 Secs Configure the web.config for the _layouts web.config with On the SharePoint server change C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\web.config with an executionTimeout appropriate for the file size you are uploading. An example is included below. from: to: executionTimeout="999999" maxRequestLength="2097151" /

  Read the article

• How to set root public folder permissions in Exchange 2010.

  - by DanieL

  I am currently running Exchange Server 2010 on Windows Server 2008 R2. I have a user that I would like to be able to create/delete public folders in the root public folder. How do I give this user permission to do this? So far I have tried adding the user to the Public Folder Management, Domain Admins, and Administrators groups, and running the following scripts in the powershell: Add-PublicFolderAdministrativePermission -Identity "\" -User "Username" -AccessRights AllExtendedRights -InheritanceType SelfAndChildren This appears to have done something, but the user still cannot create public folders in the root public folder. AddUsersToPFRecursive.ps1 -toppublicfolder \ -User "Username" -Permissions Owner This gives me an access denied error. Any ideas?

  Read the article

• KB980408: Fix for Explorer freezing: does anyone know what apps cause it?

  - by Ian Boyd

  Microsoft released an update for Windows 7 today: KB980408: The April 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2 is available. The update fixes, among other things: Windows Explorer may stop responding for 30 seconds when a file or a directory is created or renamed after certain applications are installed. i'm not experiencing it on my own Windows 7 machine, but two colleagues at work were experiencing the problem. i would really like to know what applications were causing problems. Microsoft will never call out the misbehaving applications. i want to know what software i should be ridiculing and insulting. And avoid in the future. Did anyone who was experiencing this problem isolate the applications?

  Read the article

• Invalid printer specified

  - by user1561124

  The error is that when a batch (about 15) of similar 1 page documents are sent to the printer from the server some of them (last time it was 5) fail with the message ‘Invalid printer specified’ and the others work fine. The same document sent 1 second later will work fine. We are using. Winodws 2008 R2 Std server (64 Bites) C# version 4 Crystal API version 13.2 Printer: HP LaserJet 600 M602 This is error message I'm getting. An error of type COMException occured with message " Invalid printer specified. GBPickList {FBC22A8B-E19A-438A-923A-F44EEDB861BD}.rpt". Target Site:Void ModifyPrinterName(System.String), stack: at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal) at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)

  Read the article

• Dual monitors through 1 HDMI port

  - by Carlos

  I currently have a Dell Studio XPS 13 laptop connected to a 24" HP monitor (w2448hc). Im thinking on getting a second one, however am wondering what i need for the setup (hardware wise). Also I was wondering it there is any down side to it, or something i should be aware of. For example, image quality loss, GPU overloading, or anything important I should know. More than anything Im interested in your advice. Also the monitors do have built in speakers (HDMI sound output), is the sound going to be reproduced by only one monitor or both? Specs Model: Dell Studio XPS 13 OS: Genuine Windows® 7 Home Premium 64-Bit CPU: Intel® CoreTM 2 Duo P8600 (2.4GHz, 3MB L2 Cache, 1067MHz FSB) Chipset: NVIDIA® GeForce® MCP79MX RAM: 4GB 1067MHz DDR3 SDRAM Graphics: SLi NVIDIA® GeForce® 9500M - 256MB Thanks for your advice, if there is anything additional i need to buy an you have a personal preference pass the brand name so i can check it out. Thanks!

  Read the article

• Upon reboot, Linux software raid fails to include one device of a RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

  Read the article

• Supplementary Developer Laptop

  - by David Smith

  I'm looking to buy a laptop with the following specs for a developer. The goal will be to have a development machine supplementing the devs desktop. During work hours the dev will be on a beefy desktop. For working while on the go: trains, client sites, code camps, it would be nice to have a machine which can run Visual Studio 2008 without needing to remote desktop into their primary machine. What do you think is the lowest cost laptop meeting this need? Here are the specs I have in mind: SSD drive 64GB-doesn't need to be huge, most data is stored on servers. Will need to fit Windows 7, IIS, SQL Server, and Visual Studio 2010. RAM-3GB processor =Pentium Core 2 duo Screen size = 14 inches. OS doesn't matter. It will be paved with Windows 7 Ultimate optical drive omitted would be a plus. weight and battery life aren't so important because the machine will be plugged in almost all the time.

  Read the article

• Why don't SCOM R2 web console performance views load?

  - by Nexus

  When I select any performance view via my SCOM R2 web console, I get the following error: Unexpected error There was an error displaying the page you requested. ... and some suggestions about restarting my browser, which doesn't resolve the issue. The request produces the following event in the logs: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 7/05/2010 11:41:38 AM Event time (UTC): 7/05/2010 1:41:38 AM Event ID: f4c47d1302694e1c8039e6c0088c2520 Event sequence: 18 Event occurrence:1 Event detail code: 0 [snip] Exception information: Exception type: HttpException Exception message: Error executing child request for /ResultViews/ViewTypePerformance.aspx. I'm using forms authentication and all other web console functionality works perfectly. My server is Windows 2008 R2 Standard running SCOM R2 and runs the DB, Web Console and RMS roles. Has anyone else experienced this issue? Is it fixed in the cumulative update release for SCOM R2?

  Read the article

• Sharepoint Search crawl not working

  - by Satish

  Search Crawling is error out on my MOSS 2007 installation. I get the following error for all the web apps I have following error in Crawl logs. http://mysites.devserver URL could not be resolved. The host may be unavailable, or the proxy settings are not configured correctly on the index server. The Application Event log also has the following corresponding error The start address http://mysites.devserver cannot be crawled. Context: Application 'SSPMain', Catalog 'Portal_Content' Details: The URL of the item could not be resolved. The repository might be unavailable, or the crawler proxy settings are not configured. To configure the crawler proxy settings, use the Proxy and Timeout page in search administration. (0x80041221) I'm using Windows 2008 server. I tried accessing the site using the above mentioned url and its available. I did the registry setting for loop back issue found here http://support.microsoft.com/kb/896861 still not luck. Any Ideas?

  Read the article

< Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >