Search Results

Search found 22000 results on 880 pages for 'worker process'.

Page 678/880 | < Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >

  • Toshiba Portege M400 screen rotation not working under Windows 7 x64

    - by Christi
    I have installed Windows 7 on my Toshiba Portege M400. This in itself was relatively tricky.* However, the button utilities aren't quite working for me. One of the buttons tries to launch the Toshiba Assist program, which doesn't appear to be available under Windows 7 for the M400, but this I can live without. More important is that the screen won't rotate as it is supposed to when you hold the "cancel" (X in a circle) button on the bezel. The PC is set to run "C:\Program Files (x860\Toshiba\Toshiba Rotation Utility\phtrot.exe". There is a "trot.exe" file in the same directory (the former appears to be to cause slightly different behaviour when rotation is done by press and hold). Neither of these programs rotates the screen either by using the buttons or from the command line. The screen is rotating normally when switching from tablet to laptop mode, so there does not appear to be an inherent problem with rotation. I'd just like to be able to use the buttons on the side of the screen to change the screen orientation. Windows XP used to have a "setrot" utility to do this, but that seems to have gone in Windows 7 Thanks for your help. *Just in case anyone comes looking for how to do this, you need to extract driver files from http://cdgenp01.csd.toshiba.com/content/support/downloads/util_raid_os2007252a.exe, which does not seem to be listed among the available files for the m400. This executable contains the SATA interface drivers that will need to be loaded by the installer before it can see your hard disk drive. It needs to be unpacked and the files copied to a USB key which they can then be loaded from in the install process. The utilities etc. for installation post windows install are all available from the Toshiba USA support website.

    Read the article

  • Windows XP SP3 Keyboard stops working

    - by Kevin K
    Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windoze at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

    Read the article

  • SharePoint 2010 User Profile Synchronization

    - by manemawanna
    Hello, I'm completely new to working with SharePoint and Windows Server, but last week I was given a small brief to play with SharePoint 2010 to see how I got along with it. Anyway I've set up a SharePoint server and had a mess around to get some new sites and pages created etc, but I'm now looking to have a try at importing some AD groups. As part of this I've look at these tutorials, here and here. So far I've got through to the process of starting the User Profile Service which works fine, but when I get it starting the User Profile Synchronization service it sits on starting. But when I refresh the page or go to the monitoring section it shows it as aborted. Now I'm new to administering servers like I say and when I start the User Profile Synchronization service it tries to run as NT AUTHORITY\NETWORK SERVICE and asks for a password so I've been providing it with the admin password, now I'm not sure if this is part of the issue or not as I've checked the log files and they seem to say that it doesn't have permissions, which is fair enough, but I can't see how you can change the account even if I wanted to. So if anyone could help it would be appreciated, if you need any further information to help with an answer, just let me know.

    Read the article

  • Too many apache processes, killing the CPU

    - by RULE101
    I am noticed that too many apache processes killing the CPU in my dedicated server. 14193 (Trace) (Kill) nobody 0 66.1 0.0 /usr/local/apache/bin/httpd -k start -DSSL 14128 (Trace) (Kill) nobody 0 65.9 0.0 /usr/local/apache/bin/httpd -k start -DSSL 14136 (Trace) (Kill) nobody 0 65.9 0.0 /usr/local/apache/bin/httpd -k start -DSSL 14129 (Trace) (Kill) nobody 0 65.8 0.0 /usr/local/apache/bin/httpd -k start -DSSL 13419 (Trace) (Kill) nobody 0 65.7 0.0 /usr/local/apache/bin/httpd -k start -DSSL 13421 (Trace) (Kill) nobody 0 65.7 0.0 /usr/local/apache/bin/httpd -k start -DSSL 13426 (Trace) (Kill) nobody 0 65.7 0.0 /usr/local/apache/bin/httpd -k start -DSSL 13428 (Trace) (Kill) nobody 0 65.7 0.0 /usr/local/apache/bin/httpd -k start -DSSL 13429 (Trace) (Kill) nobody 0 65.7 0.0 /usr/local/apache/bin/httpd -k start -DSSL 12173 (Trace) (Kill) nobody 0 65.5 0.0 /usr/local/apache/bin/httpd -k start -DSSL 14073 (Trace) (Kill) nobody 0 65.5 0.0 /usr/local/apache/bin/httpd -k start -DSSL I am getting high load email notification from cpanel during the day. FROM httpd.conf Include "/usr/local/apache/conf/includes/pre_main_global.conf" Include "/usr/local/apache/conf/includes/pre_main_2.conf" LoadModule bwlimited_module modules/mod_bwlimited.so LoadModule h264_streaming_module /usr/local/apache/modules/mod_h264_streaming.so AddHandler h264-streaming.extensions .mp4 Include "/usr/local/apache/conf/php.conf" Include "/usr/local/apache/conf/includes/errordocument.conf" ErrorLog "logs/error_log" ScriptAliasMatch ^/?controlpanel/?$ /usr/local/cpanel/cgi-sys/redirect.cgi ScriptAliasMatch ^/?cpanel/?$ /usr/local/cpanel/cgi-sys/redirect.cgi ScriptAliasMatch ^/?kpanel/?$ /usr/local/cpanel/cgi-sys/redirect.cgi ScriptAliasMatch ^/?securecontrolpanel/?$ /usr/local/cpanel/cgi-sys/sredirect.cgi ScriptAliasMatch ^/?securecpanel/?$ /usr/local/cpanel/cgi-sys/sredirect.cgi ScriptAliasMatch ^/?securewhm/?$ /usr/local/cpanel/cgi-sys/swhmredirect.cgi ScriptAliasMatch ^/?webmail/?$ /usr/local/cpanel/cgi-sys/wredirect.cgi ScriptAliasMatch ^/?whm/?$ /usr/local/cpanel/cgi-sys/whmredirect.cgi RewriteEngine on AddType text/html .shtml Alias /akopia /usr/local/cpanel/3rdparty/interchange/share/akopia/ Alias /bandwidth /usr/local/bandmin/htdocs/ Alias /img-sys /usr/local/cpanel/img-sys/ Alias /interchange /usr/local/cpanel/3rdparty/interchange/share/interchange/ Alias /interchange-5 /usr/local/cpanel/3rdparty/interchange/share/interchange-5/ Alias /java-sys /usr/local/cpanel/java-sys/ Alias /mailman/archives /usr/local/cpanel/3rdparty/mailman/archives/public/ Alias /pipermail /usr/local/cpanel/3rdparty/mailman/archives/public/ Alias /sys_cpanel /usr/local/cpanel/sys_cpanel/ ScriptAlias /cgi-sys /usr/local/cpanel/cgi-sys/ ScriptAlias /mailman /usr/local/cpanel/3rdparty/mailman/cgi-bin/ <Directory "/"> AllowOverride All Options All </Directory> <Directory "/usr/local/apache/htdocs"> Options All AllowOverride None Require all granted </Directory> <Files ~ "^error_log$"> Order allow,deny Deny from all Satisfy All </Files> <Files ".ht*"> Require all denied </Files> <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common CustomLog "logs/access_log" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> </IfModule> <IfModule alias_module> ScriptAlias /cgi-bin/ "/usr/local/apache/cgi-bin/" </IfModule> <Directory "/usr/local/apache/cgi-bin"> AllowOverride None Options All Require all granted </Directory> <IfModule mime_module> TypesConfig conf/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz </IfModule> <IfModule prefork.c> Mutex default mpm-accept </IfModule> <IfModule mod_log_config.c> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log common </IfModule> <IfModule worker.c> Mutex default mpm-accept </IfModule> # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # Direct modifications to the Apache configuration file may be lost upon subsequent regeneration of the # # configuration file. To have modifications retained, all modifications must be checked into the # # configuration system by running: # # /usr/local/cpanel/bin/apache_conf_distiller --update # # To see if your changes will be conserved, regenerate the Apache configuration file by running: # # /usr/local/cpanel/bin/build_apache_conf # # and check the configuration file for your alterations. If your changes have been ignored, then they will # # need to be added directly to their respective template files. # # # # It is also possible to add custom directives to the various "Include" files loaded by this httpd.conf # # For detailed instructions on using Include files and the apache_conf_distiller with the new configuration # # system refer to the documentation at: http://www.cpanel.net/support/docs/ea/ea3/customdirectives.html # # # # This configuration file was built from the following templates: # # /var/cpanel/templates/apache2/main.default # # /var/cpanel/templates/apache2/main.local # # /var/cpanel/templates/apache2/vhost.default # # /var/cpanel/templates/apache2/vhost.local # # /var/cpanel/templates/apache2/ssl_vhost.default # # /var/cpanel/templates/apache2/ssl_vhost.local # # # # Templates with the '.local' extension will be preferred over templates with the '.default' extension. # # The only template updated by the apache_conf_distiller is main.default. # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # PidFile logs/httpd.pid # Defined in /var/cpanel/cpanel.config: apache_port Listen 0.0.0.0:80 User nobody Group nobody ExtendedStatus On ServerAdmin [email protected] ServerName server.powerlabel.net LogLevel warn # These can be set in WHM under 'Apache Global Configuration' Timeout 300 ServerSignature On <IfModule prefork.c> </IfModule> RewriteEngine on RewriteMap LeechProtect prg:/usr/local/cpanel/bin/leechprotect Mutex file:/usr/local/apache/logs rewrite-map <IfModule !mod_ruid2.c> UserDir public_html </IfModule> <IfModule mod_ruid2.c> UserDir disabled </IfModule> # DirectoryIndex is set via the WHM -> Service Configuration -> Apache Setup -> DirectoryIndex Priority DirectoryIndex index.html.var index.htm index.html index.shtml index.xhtml index.wml index.perl index.pl index.plx index.ppl index.cgi index.jsp index.js index.jp index.php4 index.php3 index.php index.phtml default.htm default.html home.htm index.php5 Default.html Default.htm home.html # SSLCipherSuite can be set in WHM under 'Apache Global Configuration' SSLPassPhraseDialog builtin SSLUseStapling on SSLStaplingCache shmcb:/usr/local/apache/logs/stapling_cache_shmcb(256000) SSLSessionCache shmcb:/usr/local/apache/logs/ssl_gcache_data_shmcb(1024000) SSLSessionCacheTimeout 300 Mutex file:/usr/local/apache/logs ssl-cache SSLRandomSeed startup builtin SSLRandomSeed connect builtin # Defined in /var/cpanel/cpanel.config: apache_ssl_port Listen 0.0.0.0:443 AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl AddHandler cgi-script .cgi .pl .plx .ppl .perl AddHandler server-parsed .shtml AddType text/html .shtml AddType application/x-tar .tgz AddType text/vnd.wap.wml .wml AddType image/vnd.wap.wbmp .wbmp AddType text/vnd.wap.wmlscript .wmls AddType application/vnd.wap.wmlc .wmlc AddType application/vnd.wap.wmlscriptc .wmlsc <Location /whm-server-status> SetHandler server-status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> # SUEXEC is supported Include "/usr/local/apache/conf/includes/pre_virtualhost_global.conf" Include "/usr/local/apache/conf/includes/pre_virtualhost_2.conf" What can cause this and how can i fix it ?

    Read the article

  • AWStats consumes too much resource, how to disable temporarily

    - by trante
    For some days AWStats takes %10-%20 of my CPU, takes 400-550 MB RAM and works for hours. Maybe my site's traffic became larger so process time takes more time than before or some bugs in program makes this. Anyway I want to disable AWStats temporarily. Maybe I would want to activate it in future. I found that answer. But it gives commands to remove AWStats. I only want to disable it temporarily. My system is Centos 6.3, Plesk 11.5.30 Update #19. I tried to disable cron jobs. I run this # killall awstats.pl I opened # vi /etc/cron.daily/awstats file and I changed it to this: #!/bin/sh #/usr/share/awstats/awstats_updateall.pl now -awstatsprog=/var/www/cgi-bin/awstats/awstats.pl -configdir=/etc/awstats >/dev/null 2>&1 exit 0 After some time I still see that awstats is running. What should I do more to not to awstats run again ? But without removing my files. After changing " /etc/cron.daily/awstats" file awstats doesn't start in daytime. But every night in 03:15 awstats starts again. Because of Plesk auto updates are working at that time, I changed from Plesk. Don't auto update automatically. But it seems like last night at 03:15 awstats started again. Is there any way to stop awstats temporarily except this solution ? Because this solution deletes awstats configs permanently and I don't know how to revert it back in future ? Turn off all AWStats for Plesk 11+ domains #!/bin/bash for i in /var/www/vhosts/*; do echo "Turning off and deleting Stats for" echo `basename $i` /usr/local/psa/admin/bin/webstatmng --unset-configs --stat-prog=awstats --domain-name=`basename $i` /usr/local/psa/admin/bin/webstatmng --clean --stat-prog=awstats --domain-name=`basename $i` done

    Read the article

  • ERROR: Can't find the archive-keyring

    - by 23tux
    I'm trying to upgrade my Debian Lenny to Squeeze. I've replaced the word lenny to squeeze in sources.list and ran apt-get clean apt-get update apt-get dist-upgrade But after a while, I get this error Preconfiguring packages ... Setting up debian-archive-keyring (2010.08.28) ... ERROR: Can't find the archive-keyring Is the ubuntu-keyring package installed? dpkg: error processing debian-archive-keyring (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: debian-archive-keyring E: Sub-process /usr/bin/dpkg returned an error code (1) So I tried to install apt-get -f install debian-archive-keyring and I got the same error. Then I tried to install apt-get -f install ubuntu-keyring and I got this error: Reading package lists... Done Building dependency tree Reading state information... Done Package ubuntu-keyring is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package ubuntu-keyring has no installation candidate Maybe I have the wrong sources in my sources.list: deb ftp://mirror.hetzner.de/debian/packages squeeze main contrib non-free deb ftp://mirror.hetzner.de/debian/security squeeze/updates main contrib non-free deb http://ftp.de.debian.org/debian/ squeeze main non-free contrib deb-src http://ftp.de.debian.org/debian/ squeeze main non-free contrib deb http://security.debian.org/ squeeze/updates main contrib non-free deb-src http://security.debian.org/ squeeze/updates main contrib non-free Hope anyone can help me, thx, tux

    Read the article

  • Powerpoint 2010 crash on quickstyle menu

    - by Marcus Lindblom
    Windows 7 64-bit, recent install, added Office 2010. When I create some boxes and open the quick-style menu, it crashes (or stops responding, in windowese, and then it sends an error report). I've run the "Repair" from the installer, but it didn't help. There's nothing in Windows Update I've Googled and searched on Microsoft's site, but n Any other ideas? (It's not related to this ppt crash question as that concerns PPT 2007. Error in event log: Faulting application name: POWERPNT.EXE, version: 14.0.4754.1000, time stamp: 0x4b967cf2 Faulting module name: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfe0 Exception code: 0xe0000003 Fault offset: 0x000000000000aa7d Faulting process id: 0xee8 Faulting application start time: 0x01cb9dc710fd76d8 Faulting application path: C:\Program Files\Microsoft Office\Office14\POWERPNT.EXE Faulting module path: C:\Windows\system32\KERNELBASE.dll Report Id: 58766562-09ba-11e0-90d1-00215a139192 And: Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: POWERPNT.EXE P2: 14.0.4754.1000 P3: 4b967cf2 P4: KERNELBASE.dll P5: 6.1.7600.16385 P6: 4a5bdfe0 P7: e0000003 P8: 000000000000aa7d P9: P10: Attached files: C:\Users\marcusl\AppData\Local\Temp\CVR86DD.tmp.cvr C:\Users\marcusl\AppData\Local\Temp\WERC765.tmp.WERInternalMetadata.xml These files may be available here: C:\Users\marcusl\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_POWERPNT.EXE_d45f313d77f7e52cc8682b2b64cc3898127c2c_1106e3ac Analysis symbol: Rechecking for solution: 0 Report Id: 58766562-09ba-11e0-90d1-00215a139192 Report Status: 1

    Read the article

  • How to construct SELinux rules for a Glassfish server

    - by tronda
    I'm running Glassfish 3.1 on a CentOS 6 solution and by default SELinux is enabled. I have installed Sun's JDK version 1.6.0_29 on the server and extracted the Glassfish 3.1.1 to /opt/glassfish-3.1.1 with a link /opt/glassfish pointing to the latest Glassfish version. I've also created a system user named glassfish with a home directory /home/glassfish. When running with SELinux enabled I get all sorts of errors. For instance I'm not able to create the domain. I kind of like the concept of SELinux, and would like to be able to have SELinux enabled. I have the following requirements for the Glassfish server: Listening to port 8080 and 8081 Other ports 7676: JMS 8686: JMX monitoring, 4848: Admin console Forwarding from apache to Glassfish through mod_jk and port 8009 Starting OpenMQ as an separate process which listens to 7676 and it's JMX monitoring port 7776 Able to read and write files at a specified area (different from home directory) Able to use /tmp/ for temporary files I am aware of the audit2allow tool when running in permissive mode, but I struggle with understanding the rules that is generated from this tool, and thought that setting up these rule manually the first time would help me understand the SELinux rules better than the simplistic examples that I've seen so far. Can someone with SELinux experience help me form these SELinux rules with comments describing each part of the rules?

    Read the article

  • snmpd dead but subsys locked

    - by Hina NMS
    Hi folks I have an NMS and a Client machine. I want the client to send traps to the NMS. I have been configuring the snmpd.conf file testing if i disable a process do i receive an alert or not. For the changes to reflect that were made in the conf file i restarted the snmpd daemon each time. The testing was going fine. All of a sudden when i restarted snmpd i recieved the error msg "snmpd dead but subsys locked". I googled for answer as to what it actually meant and found out that when a service is started a logfile is created in the /var/lock/subsys. Sometimes if the service is not stopped properly or whatever the logfile remains created. Though i started/stopped the snmpd service properly it didnt go away so i removed the file manually (via rm cmd). when i checked the status the error "snmpd dead but subsys locked" was gone. On my NMS i recieved the alert of snmpd coldstart. i started the snmpd service everything goes fine! BUT after 5 mins again i recieve the same error message and this keeps on happening..what do i need to do now?

    Read the article

  • Webmin / Virtualmin running php as www-data, is locked out of viewing .htaccess and writing

    - by Kirill
    I've asked this on the virtualmin forums, but haven't had any help from there. Recently, "something" happened and it seems that the apache service has gone a bit weird. What it does: it runs all apache traffic as www-data and sometimes spawns the php5-cgi process as www-data, this is a problem because all the domain users own their directories and default permissions don't let www-data write to these folders (file uploads are dead) or read .htaccess (permalinks are broken in wordpress). I've googled this for about a week straight now, tried pretty much everything I could find and achieved nothing. The only thing that I think might actually be the cause of all this is this page: http:// - i.imgur.com/NYW3x.png (got shut down by the spam filter) So I figured if I set it to "default", this might magically start working again, but all it does is "crash" apache (all websites timeout). I figure it's something to do with the "mpm" module or something, but I can't find anything relevant in the settings to modify for it to work. Can someone please point me in the right direction? System info: Webmin version 1.580 Kernel and CPU Linux 2.6.35.4-rscloud on x86_64 Virtualmin version 3.90.gpl GPL Ubuntu 10.04 LTS (Lucid) A couple screenshots of top http://i.imgur.com/U2DTK.png http://i.imgur.com/sNPKs.png

    Read the article

  • How can I resolve Oracle 11g XE connection failure straight after installation?

    - by d3vid
    I have just installed Oracle 11g XE on a Windows 7 VirtualBox VM, using all the default options. "Getting Started" fails When I click on Getting Started I get taken to http://127.0.0.1:8080/apex/f?p=4950 which fails. After some browsing I came across a suggestion to confirm the HTTP port, but I can't get this far, because I can't connect. connect system fails If I select Run SQL command line I get taken to a SQL prompt. I enter connect system and get prompted for a password. I enter the password. I immediately get the following error: ERROR: ORA-01033: ORACLE initialization or shutdown in progress Process ID: 0 Session ID: 0 Serial number: 0 Info: Start database This happens whether or not I run Start database first. (Start database just opens a Windows command prompt window.) Info: Windows services My Oracle services start as follows: Starting the manual services doesn't resolve the problem. Enabling and starting the disabled service doesn't resolve the problem. Is there something I haven't done? How can I resolve this connection error?

    Read the article

  • Is anyone using KVM in production?

    - by Andy Shellam
    I've been trying to set up a pair of servers utilising KVM on Ubuntu 9.10 to host 8 virtual machines between them and ended up with various issues from the VMs freezing, to not powering on. I had one virtual server set up and running and was setting up a second, when any operation involving OpenSSL would cause the VM to lock up in a weird way - all network traffic would cease, it wouldn't process logins on the console, but it wasn't taking any CPU time off the host. The first virtual server was identical and worked perfectly. Another VM I tried to setup had installed Ubuntu fine then refused to reboot, throwing kernel exceptions to do with XFS. I've now installed Citrix XenServer 5.5 on both hosts, and am now setting up my third VM with absolutely no issues. I also had the same experience when I tried VMware, but I preferred Xen as it appears to give more features on the free license. My question is am I just unlucky with KVM, or is KVM as unstable as it appears? Are you using, or planning on using, KVM in production, and how successful have you been?

    Read the article

  • Invoking 'Hotkey Mode' in IO Gear's GCS632U KVM Switch

    - by Tim Visher
    Awhile ago I changed the switch port key to left control on my IO Gear USB Switch and I'd like to change it back to Scroll Lock. When I did this, I have some memory of believing that I had found an error in the documentation for the switch regarding how to enter Hotkey Mode. Per the instructions in the manual(PDF), I'm supposed to be able to enter Hotkey Mode by Holding Scroll Lock for 2 seconds, adding Minus on the keypad for one second, and then release Minus first and within a second release Scroll lock. Ignoring the strangeness and fragility of this process, I'm looking for confirmation that this indeed works for anyone else. I can't remember why I thought it was wrong but I clearly remember that I did (I even had a blog post that I was going to write about but it got lost in the sands of time). As an aside, I'd be interested in seeing if there is any way to force a reset for the switch without entering Hotkey Mode as that would do exactly what I'm trying to do and I wouldn't have to mess with Hotkey Mode. Thanks in advance!

    Read the article

  • Ubuntu 10.04 preseed unattended install results in faulty partition table

    - by joschi
    I'm currently trying to set up an unattended installation of Ubuntu 10.04 (Lucid Lynx) through preseeding. But whenever I try to create a custom partition scheme, the Debian installer (which Ubuntu is using) produces a faulty partition table. I've taken the partition scheme described in the example preseed file: d-i partman-auto/expert_recipe string \ boot-root :: \ 40 50 100 ext3 \ $primary{ } $bootable{ } \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext3 } \ mountpoint{ /boot } \ . \ 500 10000 1000000000 ext3 \ method{ format } format{ } \ use_filesystem{ } filesystem{ ext3 } \ mountpoint{ / } \ . \ 64 512 300% linux-swap \ method{ swap } format{ } \ . Unfortunately it also produces an incorrect partition table on the disk. The installation process itself is working and the installed system eventually boots and is working, as far as I can tell. But fdisk and cfdisk are still complaining: # fdisk -l /dev/sda Disk /dev/sda: 17.2 GB, 17179869184 bytes 255 heads, 63 sectors/track, 2088 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000a1cdd Device Boot Start End Blocks Id System /dev/sda1 * 1 5 37888 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 5 2089 16736257 5 Extended /dev/sda5 5 2013 16121856 83 Linux /dev/sda6 2013 2089 613376 82 Linux swap / Solaris cfdisk even refuses to start at all: # cfdisk /dev/sda FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder parted on the other hand does not complain about the cylinder boundary of /dev/sda1: # parted /dev/sda p Model: VMware Virtual disk (scsi) Disk /dev/sda: 17.2GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 39.8MB 38.8MB primary ext4 boot 2 40.9MB 17.2GB 17.1GB extended 5 40.9MB 16.5GB 16.5GB logical ext4 6 16.6GB 17.2GB 628MB logical linux-swap(v1) Since the installed system is working, it shouldn't be a big problem but I'm afraid that this will mean trouble in the future.

    Read the article

  • Configuration management in support of scientific computing

    - by Sharpie
    For the past few years I have been involved with developing and maintaining a system for forecasting near-shore waves. Our team has just received a significant grant for further development and as a result we are taking the opportunity to refactor many components of the old system. We will also be receiving a new server to run the model and so I am taking this opportunity to consider how we set up the system. Basically, the steps that need to happen are: Some standard packages and libraries such as compilers and databases need to be downloaded and installed. Some custom scientific models need to be downloaded and compiled from source as they are not commonly provided as packages. New users need to be created to manage the databases and run the models. A suite of scripts that manage model-database interaction needs to be checked out from source code control and installed. Crontabs need to be set up to run the scripts at regular intervals in order to generate forecasts. I have been pondering applying tools such as Puppet, Capistrano or Fabric to automate the above steps. It seems perfectly possible to implement most of the above functionality except there are a couple usage cases that I am wondering about: During my preliminary research, I have found few examples and little discussion on how to use these systems to abstract and automate the process of building custom components from source. We may have to deploy on machines that are isolated from the Internet- i.e. all configuration and set up files will have to come in on a USB key that can be inserted into a terminal that can connect to the server that will run the models. I see this as an opportunity to learn a new tool that will help me automate my workflow, but I am unsure which tool I should start with. If any member of the community could suggest a tool that would support the above workflow and the issues specific to scientific computing, I would be very grateful. Our production server will be running Linux, but support for OS X would be a bonus as it would allow the development team to setup test installations outside of VirtualBox.

    Read the article

  • Configuration management in support of scientific computing

    - by Sharpie
    For the past few years I have been involved with developing and maintaining a system for forecasting near-shore waves. Our team has just received a significant grant for further development and as a result we are taking the opportunity to refactor many components of the old system. We will also be receiving a new server to run the model and so I am taking this opportunity to consider how we set up the system. Basically, the steps that need to happen are: Some standard packages and libraries such as compilers and databases need to be downloaded and installed. Some custom scientific models need to be downloaded and compiled from source as they are not commonly provided as packages. New users need to be created to manage the databases and run the models. A suite of scripts that manage model-database interaction needs to be checked out from source code control and installed. Crontabs need to be set up to run the scripts at regular intervals in order to generate forecasts. I have been pondering applying tools such as Puppet, Capistrano or Fabric to automate the above steps. It seems perfectly possible to implement most of the above functionality except there are a couple usage cases that I am wondering about: During my preliminary research, I have found few examples and little discussion on how to use these systems to abstract and automate the process of building custom components from source. We may have to deploy on machines that are isolated from the Internet- i.e. all configuration and set up files will have to come in on a USB key that can be inserted into a terminal that can connect to the server that will run the models. I see this as an opportunity to learn a new tool that will help me automate my workflow, but I am unsure which tool I should start with. If any member of the community could suggest a tool that would support the above workflow and the issues specific to scientific computing, I would be very grateful. Our production server will be running Linux, but support for OS X would be a bonus as it would allow the development team to setup test installations outside of VirtualBox.

    Read the article

  • PostgreSQL update problems with uuid

    - by kdl
    Hi, I am trying to run yum update on my CentOS 5.2 box and keep getting this message: Missing Dependency: libossp-uuid.so.15 is needed by package postgresql-contrib I ran yum update postgresql separately and now it's 8.3.8. I also downloaded uuid-1.6.2 and built it from source, but I still get the same result. yum update -d6 uuid gives me this at the end: --> Running transaction check ---> Package uuid.i386 0:1.6.1-3.el5.kb set to be updated Checking deps for uuid.i386 0-1.6.1-3.el5.kb - u Checking deps for uuid.i386 0-1.5.1-4.rhel5 - None postgresql-contrib requires: libossp-uuid.so.15 --> Processing Dependency: libossp-uuid.so.15 for package: postgresql-contrib Needed Require is not a package name. Looking up: libossp-uuid.so.15 Potential Provider: uuid.i386 0:1.5.1-4.rhel5 Mode is u for provider of libossp-uuid.so.15: uuid.i386 0:1.5.1-4.rhel5 Mode for pkg providing libossp-uuid.so.15: u Cannot find an update path for dep for: libossp-uuid.so.15 Searching pkgSack for dep: libossp-uuid.so.15 Potential match for libossp-uuid.so.15 from uuid - 1.5.1-4.rhel5.i386 Matched uuid - 1.5.1-4.rhel5.i386 to require for libossp-uuid.so.15 uuid - 1.5.1-4.rhel5.i386 is in providing packages but it is already installed, removing. --> Finished Dependency Resolution Dependency Process ending Error: Missing Dependency: libossp-uuid.so.15 is needed by package postgresql-contrib How can I resolve this situation? Thanks

    Read the article

  • Can't compile CentOS 5, Ruby 1.9.2 and OpenSSL 1.0.0c

    - by pstinnett
    I'm trying to install Ruby 1.9.2 on CentOS 5.5. I get through most of the make process, but when it tries to compile OpenSSL I get an error. Below is the errror outputted: compiling openssl make[1]: Entering directory `/sources/ruby-1.9.2-p136/ext/openssl' gcc -I. -I../../.ext/include/x86_64-linux -I../.././include -I../.././ext/openssl -DRUBY_EXTCONF_H=\"extconf.h\" -fPIC -O3 -ggdb -Wextra -Wno-unused-parameter -Wno-parentheses -Wpointer-arith -Wwrite-strings -Wno-missing-field-initializers -Wno-long-long -o ossl_x509.o -c ossl_x509.c In file included from ossl.h:201, from ossl_x509.c:11: openssl_missing.h:71: error: conflicting types for ‘HMAC_CTX_copy’ /usr/include/openssl/hmac.h:102: error: previous declaration of ‘HMAC_CTX_copy’ was here openssl_missing.h:95: error: conflicting types for ‘EVP_CIPHER_CTX_copy’ /usr/include/openssl/evp.h:459: error: previous declaration of ‘EVP_CIPHER_CTX_copy’ was here make[1]: *** [ossl_x509.o] Error 1 make[1]: Leaving directory `/sources/ruby-1.9.2-p136/ext/openssl' make: *** [mkmain.sh] Error 1 Any help would be greatly appreciated! I'm not a master at Linux by any means, but I was able to successfully install this version of Ruby on our dev server. Our live server is running a newer version of OpenSSL which I'm assuming is why it's breaking. Just not sure what the fix is!

    Read the article

  • raid md device is not remove from memory, how to overcome this problem

    - by santhosha
    i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

    Read the article

  • Setting up SQL Server 2005 to use all available memory in 32bit Windows Server 2003 - and verifying

    - by Rizwan Kassim
    There are a number of questions along this line - but they either sometimes contradict each other, or don't show how to properly verify that everything is actually working - hopefully this can be comprehensive... I'm running SQL Server 2005 SP3 Standard on Windows Server 2003 R2 Standard. My server has 8GB of memory installed - my system is almost entirely used as a Database Server - there are some services running on them, but the OS + services can run within 1Gb of RAM. What I've done (please tell me if I'm doing something wrong): /3GB in the boot.ini. (To increase the amount of user-space memory available - info) /PAE in the boot.ini. (Windows claimed to be doing PAE even without this switch, somethow.) Enabled AWE in SQL Server. Enabled Lock Pages in Memory Option for users SYSTEM and Local Service. (info). SQL Server Standard doesn't seem to use this until Cumulative Update 4, which isn't installed on my server. (info) Set Min/Max Memory to : 1024Mb/5112Mb After doing all the above, we definately saw a level of improvement - but I'd like now to verify my settings, make sure that I'm making full use of the memory available. (There appeared to be a slowdown when max = 7Gb, so I edged off from that value, but it might have been just perceptual.) To verify, I checked the following levels in PerfMon : Process(sqlserv):Working Set : 76386304 SQL Server(Memory Manager) : Total Server Memory : 3538944 (I saw a doc that noted that this wasn't the full memory used by SQL Server, so I'm not sure whether to trust it) So -- my questions... Should my max be around 7Gb? If not, what should it be? Why is total server memory at 3.5G, when it's been allocated 5G? What is the proper metric for the amount of memory allocated to SQL Server? The Working Set seems a bit large... Am I possibly missing any steps in the setup? Any recommended resources on starting to tune the caching system now? Thanks

    Read the article

  • Debian and Multipath IO problem

    - by tearman
    Basically the situation is, I have a box running Debian, the box internally has an Intel SCSI RAID controller which is controlling 2 hard drives in RAID1 mode which is where the OS is installed. Further, I have a QLogic fiber channel adapter that connects the unit to a Fiber Channel SAN. My process of installation is I'll install Debian to the local drives, and leave the QLogic firmware out of it for the time being. Then once I get the unit online, I'll install the firmware drivers. This flops my internal drives from /dev/sda to /dev/sdc, which is a bit annoying, but recoverable. Probably should address these by UUID anyways. Once I get back online, I have to install multipath-tools (the framework is a multipath framework). However, once I reboot the machine again, it fails on boot after discovering multipath targets, saying my local drives are busy and cannot be mounted to /root. Any help in what may be the problem here? Or at least how to disable multipath until after the unit boots and then ignores the internal drives?

    Read the article

  • Postfix won't run while selinux in enforcing mode

    - by Dina Abu-khader
    I enabled selinux forcing mode on Fedora 15 , and I was able to get apache, mysql and memcached to work fine , but I couldn't get postfix to run . I got the following errors : systemd[1]: Unit postfix.service entered failed state. kernel: [146194.117602] type=1400 audit(1318924444.361:3809): avc: denied { module_request } for pid=15447 comm="postfix" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.145456] type=1400 audit(1318924444.389:3810): avc: denied { module_request } for pid=15452 comm="master" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.146585] type=1400 audit(1318924444.390:3811): avc: denied { module_request } for pid=15452 comm="master" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.390715] type=1400 audit(1318924444.633:3812): avc: denied { module_request } for pid=15479 comm="postsuper" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.451670] type=1400 audit(1318924444.694:3813): avc: denied { module_request } for pid=15516 comm="postlog" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.459587] type=1400 audit(1318924444.702:3814): avc: denied { module_request } for pid=15517 comm="master" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system kernel: [146194.460786] type=1400 audit(1318924444.703:3815): avc: denied { module_request } for pid=15517 comm="master" kmod="net-pf-10" scontext=system_u:system_r:postfix_master_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system systemd[1]: PID 15517 read from file /var/spool/postfix/pid/master.pid does not exist. Your service or init script might be broken. systemd[1]: postfix.service: main process exited, code=exited, status=1 following steps were done : I reinstall postfix Created .autorelable and reboot restorecon -R -v /etc/postfix restorecon -R -v /var/lib/postfix Can someone tell me what am doing wrong ? Update It turns out that we have to disable the ipv6 in the main.cf and these errors were disappear. THank you

    Read the article

  • Dell Poweredge 2600 RAID Transfer How-to

    - by DCookie
    Help, please! Hardware: Dell Poweredge 2600 PERC 4 SCSI Drives, 1 standalone 3 in a RAID 5 configuration OS: Windows 2000 Server In other words, a fairly old system. Anyway, we are in the process of taking over support for this site. The current tech wants out and is fading from view fast, so we need to solve this problem: The standalone disk (where the OS was) failed. We've replaced the disk, installed the OS, but need to know exactly how to proceed from here. I've never worked with a RAID system before, so I don't want to touch anything without knowing what I'm doing. We are not certain if the site will want us to attempt to recover the array or wait for the old tech to become available. We have replaced the server with a temporary box, and recovered MOST of the data from an online backup service. However, the other tech failed to backup a part of the data and the only copy of it is on this RAID array. Hence, our caution. We have poked minimally around in the boot-up PERC config utility, and it seems to me that that's where we'll need to be to reclaim the array. Another possibility is that there is some Dell software for the RAID controller we need to acquire. Can anyone provide clues as to how to proceed from here? Any help GREATLY appreciated.

    Read the article

  • Citrix Performance monitoring

    - by Dr I
    Hi people, I has a strange thing which appears on my Citrix Farm today. My users are equiped with a Thin client Axel Model 80F, and today, one of them sustained a problem on it. He opened a citrix's Publish Desktop session (Host by a farm of Windows 2003 R2 SP2 Servers), he loaded Lotus Notes and a mail who contained an PDF attached file. Once he has opened his PDF File, his session has freezed. We've just reboot the Thin Client, and log in again on the session (which hasn't been closed during the process). Once we have log in again, we try to read the pdf and once again afer half a page the session freeze again (I can see the mouse moving on the screen but can make anything). Then I close the session, reboot correctly the thin client, and "Tada" with the same manipulationsn averything is correct and we don't facing any freeze. Well Now my question is: Is that bug came from the thin client or the server about you? I've checked on my farm and I don't have any alert from the Citrix's Monitoring console logs. According to me it's due to the Thin Client BUT I ddon't have enought monitoring tools to be sure of that. So do you have some quite godd monitoring tools or method? My config: Windows 2003 R2 SP2 Citrix Xenapp 5.0

    Read the article

  • unable to boot into safe mode even after fixing registry

    - by Anirudh Goel
    I have a windows XP sp3 system which is affected by Sality Worm. The usual symptoms of taskmanager and regedit disabled were there, and i saw that i was unable to boot my system in safe mode. Then i found that the sality worm removes the SAFEBOOT keys from registry hive. So i downloaded this reg file from http://support.kaspersky.com/faq/?qid=208279889 and was successfully able to update the reg file to my system. But still when i hit F8 during boot and select safe mode option, it still restarts after loading mup.sys file. i don't know what more to do to get to safe mode. The virus is still there in dormant stage, i can verify that because taskmanager and regedit is not disabled after i restarted in normal mode and i could browse any site and it did not kill the browser process. I also ran the salitykiller from same link above and it healed all infected exe files. This is related to another question which i have asked here,but i don't see how a common solution can solve both of those problems. Any help folks? Thanks

    Read the article

< Previous Page | 674 675 676 677 678 679 680 681 682 683 684 685  | Next Page >