Search Results

Search found 93649 results on 3746 pages for 'protector one'.

Page 679/3746 | < Previous Page | 675 676 677 678 679 680 681 682 683 684 685 686  | Next Page >

• How does a hard drive compare to Flash memory working as a hard drive in terms of speed?

  - by Jian Lin

  Some experiment I did with hard drive read/write speed was 10MB/s write and 40MB/s read, and with a USB Flash drive, it can be 5MB/s write and 10MB/s read. Also, if I put a virtual hard drive .vhd file in a hard drive or in a USB Flash drive and try a Virtual Machine using it, the one using the hard drive is quite fast, while the one using the USB Flash drive is close to not usable. So I wonder some early netbooks use 4GB or 8GB flash memory as the hard drive, and even the Apple Mac Air has an option of using flash memory instead of a hard drive. But in those situation, will the speed be slower than using a hard drive, like in the case of a USB Flash drive?

  Read the article

• What does it mean when ARP shows <incomplete> on eth1

  - by Geoff Dalgas

  We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps.

  Read the article

• Samba4 advice for production use

  - by pgb

  I have an old Samba 3 + LDAP server installed that needs to be rebuilt. I'm weighting my options, and Windows Server seems too expensive at the moment, and Samba 4 appeared to be a nice option, coupled with the last Bind 9 that can dynamically add the computers to the DNS. I have about 30 workstations, so I still consider it a small network. My questions are: Is Samba 4 stable enough for production? It seems as if the Samba team is too cautious on when to call their version final, or even beta, as compared with other open source projects. What Linux distribution would you recommend to set it up? I usually use Ubuntu Server, but may use another one if installing / maintaining Samba 4 is better on that one.

  Read the article

• Why does my ReadyNas 4200 have a constant beep post disk failure

  - by swagner88

  Went to check on a high pitched constant beep coming from the server room and discovered that all the LED lights on the disks were black except one which had a constant green. Post a Re-boot nothing changed. Console indicated that that particular drive has failed. Pulled the drive out and BAM everything is fine. Except, the high pitched beep remains. Plan is currently to replace the drive with a new same size drive we happen to have purchased for expansion. My question is, what will this do? Will the NAS accept the new drive as a replacement for the failed one and decide to shut-up? The Manual for the device is almost to straight forward and says that I can just swap drives out as I need but I find that difficult to believe: http://www.readynas.com/download/documentation/HM/RN4200_HW_24May10.pdf

  Read the article

• SysAdmin Career Question: Internal or Client Based

  - by Malnizzle

  ServerFault Community, It seems there are two positions SysAdmins find themselves in, either you are working for a non-IT services based single client (your employer) and providing in-house IT support or you work for a company who provides out sourced IT services to multiple clients. Right now I work for a company who does the latter, and I often consider how nice it would be doing the in-house side of things, to just have one network I am focused on and instead of feeling like I have a dozen bosses between clients and internal management, I would just have one set of management and people to appease. There is also the technical aspect of every client wanting something different, and having to manage numerous different technology platforms, or trying to force clients into using the technologies we prefer, neither situation is enjoyable. Is this just "the grass is greener on the other side" syndrome, or is there some legitimacy to the the stress of client based IT work compared to being an in-house IT guy? Thanks!

  Read the article

• Can I delete EFI System Partition without harming other data on drive?

  - by Andy

  I have three external HDD's in a USB enclosure. After a recent upgrade to Win7, during which these three drives were actually installed inside the PC tower, two of the three drives now have a 200MB EFI partition, and the two drives do not show up as usable drives under either Win7 or Snow Leopard. One of the drives is empty; the other one, however, has a bunch of stuff on it that I want to save if possible. My question is, how can I get back to this data? Can I simply delete the EFI partition, and all will be well? Or do I have to do something trickier? Or am I just hosed?

  Read the article

• asterisk/freeswitch in nat/no-nat setup

  - by pQd

  hi, my current setup - i use bunch of sip hard-phones around few offices. all devices have two sip accounts configured - one on internal sip proxy [for calls between the branches], another - at 3rd party voip providers [ since it's in different countries - those are different providers, but that's irrelevant ]. i was thinking about terminating sip calls on something like asterisk/freeswitch server and having all sip-devices log on just once to such server[s] - mostly to provide things like voicemail, groupcalls, redirections etc. it seems perfectly doable but there is one problem - i cannot find examples how to prepare for nat/no nat. for calls routed to from/to 3rd party voip operator - i'll need handling for nat/stun etc, but for handling of internal calls - i do not want any nat, all traffic should go via vpns to different branches. can you provide me some hints how to configure it? any tutorials? thanks!

  Read the article

• Installing OpenLDAP on Fedora 12: ldap_bind: Invalid credentials (49)

  - by Arcturus

  Hello. I've been trying to set up the OpenLDAP installed by default on Fedora 12, very unsuccessfully. My ultimate goal is to use LDAP authentication for user login and Apache, using the OpenLDAP server running on the same machine. The server is running, but the error I always get when I try to use ldapsearch or ldapadd is: ldap_bind: Invalid credentials (49) I've been following these tutorials, but none of them helped me: http://www.howtoforge.com/openldap_fedora7 http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/ref-guide/s1-ldap-quickstart.html http://www.howtoforge.com/linux_ldap_authentication http://docs.fedoraproject.org/deployment-guide/f12/en-US/html/s1-ldap-pam.html http://www.openldap.org/doc/admin24/quickstart.html First, some components were already installed, and I installed these with yum: yum install openldap-servers openldap-devel Then, I created a basic slapd.conf file in /etc/openldap: database bdb suffix "dc=sniejana-sandbox,dc=com" rootdn "cn=root,dc=sniejana-sandbox,dc=com" rootpw {SSHA}cxdz55ygPu4T3ykg7dgu+L0VRvsFSeom directory /var/lib/ldap/sniejana-sandbox.com I obtained the rootpw with this command: slappasswd -s changeme I also created the /var/lib/ldap/sniejana-sandbox.com directory and made sure the entire contents of /var/lib/ldap were owned by the ldap user. I found two ldap.conf files, one in /etc and one in /etc/openldap. I don't know which is the right one. If I understood correctly, this file is to configure the client. I put this in both: HOST localhost BASE dc=sniejana-sandbox,dc=com I then ran the server with: service slapd start It said OK. Most of the tutorials above say to use the command ldapsearch -D "cn=Manager,dc=my-domain,dc=com" -W to ensure that everything's working. When I execute this command, a password prompt appears, and after entering the password, I get the error. ldapsearch -D "cn=root,dc=sniejana-sandbox,dc=com" -W Enter LDAP password: ldap_bind: Invalid credentials (49) The same thing happens when trying to use ldapadd. I tried with an encrypted and unencrypted password in slapd.conf, it doesn't change anything. Adding a -x for simple authentication doesn't change anything either. netstat -ap confirms the server is listening: tcp 0 0 *:ldap *:* LISTEN 4148/slapd tcp 0 0 *:ldap *:* LISTEN 4148/slapd ps -ef|grep slapd confirms the process is running: ldap 4148 1 0 15:22 ? 00:00:00 /usr/sbin/slapd -h ldap:/// -u ldap Running slaptest procudes config file testing succeeded. I read somewhere that the command ldapsearch -x -b '' -s base '(objectclass=*)' namingContext can confirm the server is running. It appears to work: # extended LDIF # # LDAPv3 # base <> with scope baseObject # filter: (objectclass=*) # requesting: namingContext # # dn: # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 I'm running out of ideas. Am I missing something obvious?

  Read the article

• 8Gb Fiber Channcel HBA vs. 10 Gb SPF+ Converged HBA

  - by Hossein Aarabi

  I am putting a Dell server together, more specifically R720. I have to select the correct Host Bus Adapter. This HBA on R710 will connect to a storage device. I am confused between these two: QLogic 2562, Dual Port 8Gb Optical Fiber Channel HBA (price $2,045) QLogic 8262, Dual Port 10Gb SFP+, Converged Network Adapter (price $1,618) I thought since the QLogic 2562 is a fiber channel and is more expensive then it is faster in terms of IOPS. But, it is a 8Gb as opposed to 10 Gb of SFP+. My questions: Which one is better (IOPS performance, etc.)? Why should I choose one over another?

  Read the article

• Exchange migration to 2007 making Outlook 2003 unable to read meeting requests

  - by Kvad

  Hi, We are currently moving from Exchange 2003 to 2007 (8.2 build 176.2). We have encounted an issue with one user. In Outlook 2003 when getting a meeting request: "Can't open this item. Could not complete the operation. One or more parameter values are nto valid." The item cannot be previewed in the reading pane either. The item can be viewed in OWA and iPhone fine. I've tried with cache mode off and on. Different computers. Same issue. There are the following entries on the account: SMTP [email protected] [email protected] X400 C=AU;A= ;P=Company Name;O=Exchange;S=LastName;G=FirstName; I'm loathe to recreate the account. This will be an extreme last resort. Any ideas? Thanks in advance.

  Read the article

• Firefox 3.5.6 causes entire computer to freeze

  - by Anthony Aziz

  Here's the situation: Environment: Just installed a fresh copy of Win7 Pro 32-bit to NTFS partition on 750GB SATA drive Hardware: E8400 3GHz ASUS P5QL Pro 4GB DDR2 1066 RAM EVGA 9800 GTX+ Plenty of cooling, no problems with hardware before Data is stored on a separate partition, including My Documents No security software is yet installed No extensions installed yet Problem: While using Firefox, sometimes the entire computer will freeze/hang. I get no mouse or keyboard input, can't CTRL+ALT+DEL, no "not responding" indication, just a static image on my display. My drivers are all up to date as far as I'm aware (I just installed this copy of Windows last week). I first noticed this when trying to install Xmarks. I went to the Xmarks site and tried to install and it would freeze. I managed to get it installed (Safe mode and the Mozilla addon site worked), but when I go to configure it (log in, etc), the computer freezes. I don't think it's a matter of usage time or memory issues, because while testing, I browsed wallpaper galleries for about 30 minutes, sometimes as many as 12-15 tabs open at a time, without issue. Sometimes I won't even try to install Xmarks at it will hang. I can install (some) other extensions, the only one I've tried is download status bar (which works). What I've done to try to fix: Restarted (duh) Windows safe mode Completely remove Firefox and install it to a new directory, according to Mozilla's KB (I haven't tried the profile manager, though I assume this does the same thing, except perhaps more thoroughly) Some BIOS changes, including Power options, disabling oveclocking (it was a modest overclock on the CPU, which has run Win7 beta and RC for almost a year now) Memtest Used another Windows user profile, same tragic results I'm STUCK now, with no idea what to do. I'm using Chrome as my main browser at the moment, but that's not something I want to be stuck with. I like Firefox and want to use it. I'm going to try creating a new profile first. One thing I did notice: I started leaving task manager and performance monitor open when anticipating (but dreading) a freeze. firefox.exe had low CPU and low memory, but it looked like overall disk usage was seeing some spikes on the small graph Performance Monitor gives you. I saw on one blog post a fellow using XP moved his Local Settings directory from a separate drive to his main drive, and that solved it, but I don't think my AppData directory is on my D: drive, and that's on the same physical device anyways. Still, something that might be worth trying. I'd extremely appreciate any help. Thanks very much. I really don't want to reinstall Windows from scratch again :( Anthony Aziz

  Read the article

• Setup MSSQL replication with peer to peer topology: problem setting up Conflict Detection

  - by Roel

  Hi, I'm setting up a SQL Replication strategy, using MSSQL2008 with peer-to-peer publications (2 servers, each one subscribes to the other). I followed this HOWTO from MSDN, and the setup seems to be working fine: add a record to one table on server A, query on server B shows the new record. So far, so good. So far I only have one table 'Templates': Id PK (calculated field) NodeId int default 1/2 (Server A = 1, Server B = 2) LocalId int autoid Name nvarchar(100) Now, I would like to enable 'Conflict detection', which should be enabled by default. But every time I try to save the 'Conflict Detection' feature in the Publication Properties I get the following error: Cannot save Peer conflict detection properties. An exception occurred while executing a Transact-SQL statement or batch.(Microsoft.SqlServer.ConnectionInfo) Program Location: at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand) at Microsoft.SqlServer.Replication.ReplicationObject.ExecCommand(String commandIn) at Microsoft.SqlServer.Replication.TransPublication.SetPeerConflictDetection(Boolean enablePeerConflictDetection, Int32 peerOriginatorID) at Microsoft.SqlServer.Management.UI.PubPropSubscriptionOptions.SaveP2PConflictDetection() at Microsoft.SqlServer.Management.UI.PubPropSubscriptionOptions.SaveProperties(ExecutionMode& executionResult) Column name 'Id' does not exist in the target table or view. Changed database context to 'TestDB'. (.Net SqlClient Data Provider) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.00.2531&EvtSrc=MSSQLServer&EvtID=1911&LinkId=20476 Server Name: SERVER_A Error Number: 1911 Severity: 16 State: 1 Line Number: 2 Program Location: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) Now, I googled the hell out of this error, and nothing shows up. I also can't seem to find out what the exact target table of the error "Column name 'Id' does not exist..." is. Has anyone every done this successfully? Am I missing something? Having this setup without conflict detection feels pretty useless... EDIT OK, so after some more research and setting up with different databases etc, I found out that the calculated 'Id' column of the Templates table is the culprit. I don't know why, but the replication doesn't seem to allow calculated columns (which are also primary key). It works now too, without the 'Id' column, and using the NodeId and LocalId as a combined PK. So now the question is, why isn't it allowed to have a calculated column as PK for replication with conflict detection?

  Read the article

• Re-Calibrate Toshiba battery meter with Windows 7

  - by Mark Henderson

  I have a Toshiba U300 laptop. Back in the olden days (circa-2000) you could re-calibrate the battery meter from the BIOS when your battery was no longer reading accurately. My battery was shot, so I bought a brand new one, however Windows 7 still seems to count down the battery life in at the same speed as the old one did. This time, when it alleged 0%, I turned the laptop back on and got another 90 minutes of life out of it, at 0%. Is there a tool or utility for Toshiba laptops that can fix it back to being accurate? I've read the other threads on SU about cycling the battery but that just doesn't seem to do it in this case. Update: After the last cycle, the battery meter now reads 100% but the indicator on the front of the laptop is still orange (indicating not fully charged)

  Read the article

• How to connect two monitors to a macbook pro?

  - by CIRK

  I have a 13" macbook pro, and I need much more space right now, so I decided to buy two smaller monitors. (these from LG). But I don't really know how will I connect them. I've seen some products like this Diamond BVU195, but it's not currently in stores in my country. I've found these Equip 128450 USB 2.0 Display Adapter DELOCK USB 2.0 to DVI/VGA/HDMI Adapter The second one looks pretty cool, but it says that Windows is a system requirement or what, so I'm not sure if it will work with mac os x? So how did you connected multiple monitors to you mac, and are these adapters the best choices, if yes then is there an OS independent one?

  Read the article

• BSOD error on Win7 ultimate

  - by jim

  BUG CHECK STRING = DRIVER_POWER_STATE_FAILURE BUG CHECK CODE = 0x0000009f PARAMETER 1 = 0x00000003 PARAMETER 2 = 0x85f05420 PARAMETER 3 = 0x82962ae0 PARAMETER 4 = 0x85aa2ab8 CAUSED BY DRIVER = ntkrnlpa.exe CAUSED BY ADDRESS = ntkrnlpa.exe+dcd10 FILE DESCRIPTION = NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) 32-bit C:\Windows\minidump\111109-22198-01.dmp This is the BSOD mini dump that I have been getting recently. I was wondering if anyone had any ideas what would cause this. I just did a clean install of win7 ultimate 32 bit. I don't do a lot with this pc. Mostly surf the web and that's when it happens. My only guess is that the power supply is failing and I need a new one. I wanted to check here and see if anyone else had some other idea before I bought a new one. Thank you for any help you can give me.

  Read the article

• Software to Monitor the Stability of Internet Connection

  - by Ngu Soon Hui

  Thanks to the excellent internet connection service offered by one of the best ISP in the world, the internet connection in my area is very, very unstable. I can connect some of the time, but MOST of the time the connection will just drop off ( with the error message unable to resolve host) and after a few minutes, it will resume back. If I ping the domain name directly (i.e., ping www.google.com -t in cmd command), I will get a cannot ping message. Because of the flickery nature of the connection, it's pretty hard to prove to the support staff that internet connection is unstable. So I am thinking about using one software to record down the connection situation, so that I can present to the technical staff and make sure that they have no excuse not to fix my problem. Any such software available? Edit: Of course, such software should not record my browsing habit, and must be able to monitor and record the internet connection condition even when I am not online.

  Read the article

• Option 82 and dhcpd. "No free leases" for second computer

  - by SaveTheRbtz

  There is DHCP server in network (isc-dhcpd-server-3.0 on FreeBSD 7.2) than gives one IP per switch port to every user via Option 82 The problem appears when user disconnects one of his computers and connects another(i.e notebook with different MAC address) then DHCPD puts to log "...network net1: no free leases", because there is record in leases file that this IP is already owned by another MAC. That second computer will have his IP only after default-lease-time (that is IIRC minimum 10min, and after 3min he usually calling support) or after deletion of dhcpd.leases file and restart of dhcpd. Is there a way to turn leases off at all, because we have strict binding between switch-port-ip?

  Read the article

• SQL Server 2000 tables

  - by user40766

  We currently have an SQL Server 2000 database with one table containing data for multiple users. The data is keyed by memberid which is an integer field. The table has a clustered index on memberid. The table is now about 200 million rows. Indexing and maintenance are becoming issues. We are debating splitting the table into one table per user model. This would imply that we would end up with a very large number of tables potentially upto the 2,147,483,647, considering just positive values. My questions: Does anyone have any experience with a SQL Server (2000/2005) installation with millions of tables? What are the implications of this architecture with regards to maintenance and access using Query Analyzer, Enterprise Manager etc. What are the implications to having such a large number of indexes in a database instance. All comments are appreciated. Thanks

  Read the article

• IPSec VPN's being dropped by router and will not re-establish

  - by David Gard

  We have 3 sites, with our two remote sites connection to head office via LAN-to-LAN VPN's. All 3 sites use DrayTek 2900's with firware version v3.3.1.1_RC2 (this is a release candidate that DrayTek suggested I try, but sadly it made no difference). The only way to re-establish the VPN's once they have been dropped is to restart the router. Head office is set to dial out to both sites, with both the 'Always on' and 'Enable PING to keep alive' (pinging a server in the remote offices) options ticked. However, at random intervals the VPN's drop, logging IKE_RELEASE VPN : Dial-out Profile Index = 7, Name = Shepton (for one connection, and '6' & 'Wincanton' for the other connection). I first tried swapping the router with one at another site, and then had all three replaced, but that failed to solve the problem. Is anyone aware of anything that could cause the VPN's to drop randomly like this? Thanks.

  Read the article

• Why i get Two value for ArrAffinity in my Cookie with Application Request Routing web servers setup

  - by Cédric Boivin

  Hello, I got a problem with ARR and my webfarm. I got a application develop, with a login page, when i log into my web application, i always log out. So I download fiddler to valid the affinity with my server and i see i got two value of key ArrAffinity in my cookie. Somme page got two value : ARRAffinity=2ea1e079a7e09ee9844bb1f5eca66f4f94432d3e832c073b80e0091fda6a54d4 ARRAffinity=d000ece875153770e561ea2d34d5ce85968d56e7a02104e726a25d445de25eed Other one got only have one ARRAffinity=d000ece875153770e561ea2d34d5ce85968d56e7a02104e726a25d445de25eed With this problem, i think my http request, is send to radom iis server on my farm, so the impact is i am disconnect. Anny idea ?

  Read the article

• Best copy and paste software for windows?

  - by jasondavis

  Sorry if this question exist already, I did some searches but could not find one myself. I am looking for the best programs to copy and paste stuff in windows more easily. So let's say instead of the default copy/paste one item at a time, I could have 5 different paragraphs that could all be pasted somewhere seperately. Hopefully this is not to confusing. Instead of bveing able to paste 1 item I would like to have a list of items that can be pasted or some similar functionality under windows. Please help make me more productive, I frequently need to copy and paste different sets of data. Here is a good exampl, let's say I need to be able to past my email somewhere but on another program or webpage I need to paste my home address.

  Read the article

• The executable is absent yet I can execute the command on the command line

  - by sharptooth

  There's such utility for Windows developers called regtlib. I have three computers - one with WinXP, another two with Win2k3. If I run built-in Windows search for file with wildcard regtlib* on the whole filesystem search finds nothing on all three computers. If I try to execute regtlib on WinXP command line it says it can't find such a file or built-in command. The same on one of the two Win2k3 computers. But when I do that on the other Win2k3 computer I see typical regtlib output. What happens? What is the magic that invokes regtlib without the file being present on the filesystem?

  Read the article

• Airport Extreme roaming setup

  - by Daniel Johansson

  We've got three Apple AirPort extremes and want to setup them as a roaming wlan network on my company. My question is what's the correct setup for this? All three AP:s is supposed to create the same wireless network "MyWlan" and we want roaming supoprt between them so that client can move from floor to floor without having to switch wlan or reconnect. We don't want to use any kind of DHCP or NAT on the AirPorts, only bridge mode. Do we connect the AirPorts to the lan/ethernet using the WAN port or one of the LAN ports? What's the correct settings in the config utility? Have one of the AirPorts create a network and setup the other two to extend the created network from AirPort 1 or have them all create the same network and set the same wlan password?

  Read the article

• Dual monitors through 1 HDMI port

  - by Carlos

  I currently have a Dell Studio XPS 13 laptop connected to a 24" HP monitor (w2448hc). Im thinking on getting a second one, however am wondering what i need for the setup (hardware wise). Also I was wondering it there is any down side to it, or something i should be aware of. For example, image quality loss, GPU overloading, or anything important I should know. More than anything Im interested in your advice. Also the monitors do have built in speakers (HDMI sound output), is the sound going to be reproduced by only one monitor or both? Specs Model: Dell Studio XPS 13 OS: Genuine Windows® 7 Home Premium 64-Bit CPU: Intel® CoreTM 2 Duo P8600 (2.4GHz, 3MB L2 Cache, 1067MHz FSB) Chipset: NVIDIA® GeForce® MCP79MX RAM: 4GB 1067MHz DDR3 SDRAM Graphics: SLi NVIDIA® GeForce® 9500M - 256MB Thanks for your advice, if there is anything additional i need to buy an you have a personal preference pass the brand name so i can check it out. Thanks!

  Read the article

• OS for Virtual Private Server (VPS)

  - by B. Stran

  Hi guys! I'm new to VPS managing and I need to chose which OS to install on my VPS. I have the following alternatives: CentOS 5.2 Ubuntu 9.10 Ubuntu Server edition 8.10 Debian 5.0 Lenny Debian 4.0 Etch Gentoo Minimal 10.0 I tried to install couple of them, I've also installed Webmin and doesn't really see any big differences among them. Which one would you suggest for someone who is just learning (but it's going to be a working server as soon as I'm done with testing)? Which one uses less resources (I have only 256 MB of RAM)? Any suggestions are greatly appreciated.

  Read the article

< Previous Page | 675 676 677 678 679 680 681 682 683 684 685 686  | Next Page >