Search Results

Search found 8706 results on 349 pages for 'boot camp'.

Page 68/349 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Ubuntu doesn't boot due to GRUB-Problems

  - by Dave

  Users out there, I came here with the spark of a hope, that you could help me. I want to get rid of my old WinXP, because the Game-Support for it seems to slowly expire now... So I took a second drive, just an old empty one I had at hands (ATA-Maxtor 90648D3), plugged of the other drive with WinXP, so that it couldn't be harmed, and started the installationof Ubuntu 12.04. Everything went as it was supposed to, until the end. Normal shutdown after successful installation process. But when I tried to boot my new Ubuntu from the HDD, it said: error: out of disk. grub rescue> So, what to do now? I already tried a lot of things in the terminal, e.g. the update-grub as mentioned on http://opensource-sidh.blogspot.de/2011/06/recover-grub-live-ubuntu-cd-pendrive.html. Everything worked, he didn't complain about a missing data or anything, but at the end of the day he still wasn't able to boot! Next step was to change the etc/default/grub-file, so that it could load the ATA-drivers first, so that there is now problem with my drive. But even this didn't seem to have any effect, I'm still stuck with Ubuntu in the Live-CD-Mode... If there was anybody to help me out there, I would be very glad. Thanks for any support, Dave P.S.: I even tried to fix it with boot-repair, a small tool for Ubuntu, and it created a file with data that could probably help you to help me. You can find it on http://paste.ubuntu.com/1428022/

  Read the article

• Bad archive mirror using PXE boot method

  - by user11566

  I'm trying to automatically install Ubuntu on a client PC by using the PXE BOOT method....my Objectives are below: I am following the steps given in this link installation using PXE BOOT the server will have a KICKSTART config file which contains the parameters for the OS installation and the files which are required for the OS installations. the client will have to detect this configuration along with the setup files and complete the installation without any input from the user. In my server I have installed DHCP3-server,Apache2 and TFTP to help me with the installation. I have nearly achieved my first objective, I am able to boot my client using the files stored in the server but during the installation stage it is asking me to CHOOSE A MIRROR OF UBUNTU ARCHIVE I gave the server's IP address and the path in the server where the files are located but then its giving me this error BAD ARCHIVE MIRROR So is it possible that instead of downloading all the files from the internet and storing them on my disk can I use the files which comes with the UBUNTU-CD, and how to store these files in what format (should I zip them) on the disk? secondly I am also generating the ks.cfg which I wanted to give to the client for automatic installation of the OS. So how should the configuration file be given to the installation process?

  Read the article

• Ubuntu 13.10 AMD/ATI proprietary driver slow boot time, lengthy login/logout delays

  - by NahsiN

  Ubuntu 13.10 is causing me major headaches with my AMD/ATI HD 5770 GPU. Below is a list of problems I am currently encountering. 1) The boot time is extended by at least 25s after installing catalyst 13.4. Using open source radeon drivers, my boot time till the login screen is ~10s. With catalyst 13.4 installed, the boot time increases to ~35s. This was not the case in Ubuntu 13.04, 12.10 or 12.04. I have done the driver installation manually (instructions from wiki.cchtml.com) and using software center and there is no difference. I have not tried the catalyst 13.8 beta driver. 2) After manual installation of catalyst 13.4, I get stuck at a black screen after logging in. I have to purge fglrx to resolve the problem. I tried sudo amdconfig --initial -f but it didn't help. 3) The delay between logging in and unity being displayed is ~10-15s for BOTH open source and proprietary drivers. During the delay, it's just a black screen. Whenever I logout, there is again a ~10-15s delay with the login screen appearing stuck before lightdm allows me to enter my password again. This is ridiculous! Yes, I could stick with open source radeon drivers but I would like to install Steam and play my Valve collection on the machine. Is anybody else encountering similar issues?

  Read the article

• 12.04 update crash, now cannot boot

  - by EdW

  Boot now freezes the system at the "Ubuntu purple screen" with the 5 dots under it. I cannot even CTRL-ALT-F1 to get to an alternate console. Have to push reset button on computer to reboot. After the 12.04 update crash, the system would boot, but I had no icons and no launch bar and errors about missing dependencies. CTRL-ALT-F1 and ran apt-get -f install and it appeared to get the missing packages. I followed with a apt-get update; apt-get upgrade. It appeared to install all of the remaining 12.04 update packages. Rebooted to same blank screen - no icons, but got a compiz error. In console I tried "unity --reset" rebooted ... Nothing ... It's dead in the water. Tried to boot into Recovery Mode - black screen - I cannot even CTRL-ALT-Del - have to push reboot button. Fortunately, I have Mint on another partition and I can access the broken 12.04 partition. Ideas? I can back up all of my folders using Mint, but I would hate to have to do a new install.

  Read the article

• Can't boot after compiling 3.1 kernel, can only get to terminal

  - by olssy

  Long story short: I tried compiling kernel 3.1 on Ubuntu 11.10 at the same time I had an update waiting for a reboot. Computer would boot to a black screen and would hang there. Ended up installing 11.10 on top of old install with a Live CD. Now I had a purple screen on bootup but it would end up booting. Realized Grub was the problem and tried some stuff but nothing worked. I ended up trying to install propriety ATI video drivers and since that nothing has worked, no grub menu(purple screen) and when it boots into the kernel it ends up hanging, I can sometimes get a terminal up with alt-fx. I have tried removing the ati drivers with the ati script, purging my fglrx driver, reconfiguring my xconf.org and following any tutorial I can find about fixing a broken graphics driver, but to no avail. I've gotten to a point were it seems that the ati propriety drivers are correctly loaded but it still has no grub boot menu and won't boot into Ubuntu. I've chased down my logs and this line is from kern.log: unity-greeter[3269]: segfault at 0 ip b7245cbbsp bf9d3900 error 4 in libgio-2.0.so.0.3000.0[b71ad000+142000] That line leads me to believe I don'T have the correct libgio-2 librairy on my system but have no idea how to find out what package has the correct version... My xorg.conf has no errors and seems to imply the fglrxdrm module got loaded correctly. Would be a bit complicated pasting the whole file here but if it would help I'll post it. LAstly, running fglrxinfo give me: Error: Unable yo open display (null) Any help or link to another tutorial would be appreciated. Thanks.

  Read the article

• Think Centre 71, Ubuntu 12 ... Error 1962: No operating system found

  - by johnboy7

  Brought a new Think Centre Edge 71 because The Lenovo ThinkCentre Edge71 desktop has been awarded the status of Certified for Ubuntu. Source. Spent the the past 2 days trying to get *any*Ubuntu 12.04 64bit to install and boot. All give me the same answer: Error 1962: No operating system found Here are a few of the links I've tried: Just installed Ubuntu 12.04. When booting, all I get is a black screen with cursor. Some of the links report to solve the problem. None have worked. http://ubuntuforums.org/showthread.php?t=1901748 Is there a relative simple way to install and boot Ubuntu 12.04 64bit on a Think Centre Edge 71?? I mean it is Certified for Ubuntu?

  Read the article

• Grub2 -- Dualboot Ubuntu LTS 12.04 and Windows 7 -- Detects two Windows 7 (loader) entries

  - by DarkIron112

  this is the first question I have ever asked the Ubuntu Community. :D I'm fairly new to Ubuntu, but I understand the basics and know how to navigate the Terminal. I also know how to ask for/research my problems before asking for/ help. I have scoured the internet high and low and learned much of how Grub2 works. But nothing has helped me to solve my problem. My problem is this: I have a computer that has three hard drives. It previously had Windows XP, but I upgraded to Windows 7. I also installed Ubuntu 12.04 LTS (Precise Pangolin). During my installation of Windows 7, there was a failure and I had to restart the installation. Afterwards, I installed Ubuntu. After some trouble removing all traces of the XP OS (Ubuntu auto-detected it, but not Windows 7) I got the two OSes working flawlessly. Or, almost. When booting up, Grub2 used to display Ubuntu, Ubuntu Recovery Mode, Other Versions of Linux, memtest, followed by "Windows 7 (loader) on /dev/sda1" and "Windows 7 (loader) on /dev/sdb1". I eventually removed Recovery Mode, Other Versions, and Memtest. Now, when I run: sudo update-grub I get this print-out: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-26-generic Found initrd image: /boot/initrd.img-3.2.0-26-generic Found Windows 7 (loader) on /dev/sda1 Found Windows 7 (loader) on /dev/sdb1 I would like to remove "Windows 7 (loader) on /dev/sda1", as it is a broken entry that shouldn't exist, and must have been installed during my first Windows 7 attempt. I cannot find a Windows 7 entry in /etc/grub.d... And I don't know where to look. Here is a layout of my hard drives: /dev/sda1/ (1.82 TiB), NTFS ("Media") /dev/sdb1/ (100 Mib), NTFS ("System Reserved") /dev/sdb2/ (149 GiB), NTFS ("Windows 7") /dev/sdb3/ (149 GiB), Extended (" ") /dev/sdb4/ (145 GiB), ext4 (" ") /dev/sdb5/ (4 GiB), linux-swap (" ") /dev/sdc1/ (488.28 GiB), NTFS ("Downloads") /dev/sdc2/ (488.28 GiB), NTFS ("AltMedia") /dev/sdc3/ (886.45 GiB), NTFS ("Personal") unallocated (2.09 MiB), unallocated What I think has happened: Windows 7 installed first and badly. I installed it again. First, there was Windows XP to guide where the bootloader went to so it was put on /dev/sdb1/. But, the second time no such guide existed so the machine put another bootloader on /dev/sda1/. sda1, by the way, is the only partition on a 2TB drive. No boot record partition appears to exist according to gedit. I'm not sure where Grub2 is getting this information from. But, there it is. Is there anything somebody can do to help me? Or, is there any more information I should add? Thank you, community!

  Read the article

• Ubuntu 11.10 running in windows 7 (wubi) AND on a separate partition

  - by Pareen

  I am in a very strange situation and need some help: I installed Ubuntu 11.10 through Wubi a while back so that I can use it alongside Windows 7. I was running out of space on my disk when trying to install applications. Without understanding how Wubi worked, I partitioned my C drive (creating a new 90 GB partition) in Windows, booted from the Ubuntu 11.10 install/live disk, and used the "something else" option to create a ext4 (setting the mount point to root) and swap space partitions (/sda5 and /sda6). After the install, my computer no longer boots with the previous Wubi menu and is now using the Linux grub. The options I have are /sda2, which boots Windows 7; /sda1, which doesn't do anything and reloads the same menu, and the run Linux options. So I now have Ubuntu running on a separate partition, as well as the original Wubi install. I want to delete the seperate partition and go back to running Ubuntu on Wubi...if I remove the partition will I need the Windows 7 disk to restore the boot loader? I dont have the Windows 7 disk on me so what is the best way to clean this up so I get rid of the seperate partition? -------------------------------------------------UPDATE----------------------------------------------------- ============================================================================================================ thank you so much for your response. Actually, it would be fantastic if I could migrate my Wubi install into the new partition because I had downloaded the AOSP on the Wubi install (as well as other files) and would love to preserve them. If i can do that and work on the new partition with the old files than that would be great, and I can worry about wiping out the partition completely later on i.e. when I have the windows disk or something. Can you tell me how to do this migration?? So when I select the /sda2, it loads up my Windows. If i click on the Linux, it loads up the newly install Linux (my files that were on the Wubi install aren't there) fine. If I click on the /sda1 (SYSTEM_DRIVE... this is what the Wubi was using to boot the menu that let me select Windows 7 or Ubuntu)... it fails and just reloads the original menu. Here is the link to my boot info script http://pastebin.com/dMrY0NL3

  Read the article

• RESIZE casper-rw

  - by Oldrifle

  UsING Toporesize-0.7.1 FLash drive is Transcent I want to add all unused space to casper-rw. Disk=3.72GB 2.68 used 1.GB casper-rw=1.95GB caspe=681MG I boot UBUNTU 11.10 64bit and see that size of HOME is about half of casper-rw It is working from flash drive ok. But I was not able to boot 11.10 64bit using USB 3.0 HDD. UBUNTU 11.10 32 bit on usb 2.0 HDD works ok ( currently multiboot with openSUSE) FUDUNTU 2012 on usb 3.0 hdd VERY FAST. Fast USB 3.0 8GB unit is ready. partitioned. Second part is labeled as casper-rw. Will try to install using partitions as base and home.No swap since I have 8GB ram. ANY SUGGESTION? Thanks

  Read the article

• PXE booting on old computer

  - by kosciak

  So my computer is not working - the disk is totally cleared, I've deleted GRUB and PLOP which I used to install new system, because CD-Rom is broken and BIOS is old (whole computer is old, it's Sony Vaio PCG-GR250) so it won't allow me to do it via USB and I got no floppy drive :) the only way is to PXE boot PLOP and install Linux from USB after PLOP has been opened. (I'm not a specialist but that's how I see it) I'm using Mac OS X 10.9 and I followed number of tutorials how to set up TFTP and DHCP server and I got PLOP here, but when I boot up with PXE it says that it found DHCP but TFTP timed out. Any help or alternative way of rescuing old laptop? Thanks in advance!

  Read the article

• Cannot install ubuntu on Asus UX51VZ

  - by Andrey Frunt

  I removed Win8, changed partition table from GPT to MBR and installed Win7. The problem is that I don't see the grub after I installed ubuntu and only win7 boots. Any ideas? I tried to reinstall all of listed above about 5 times but with no success :( I tried both 13.04 and 13.10 UPD: I also tried Boot-Repair and it installed the grub2 for me but unfortunately only with options to run ubuntu, so I repaired bootrecord using windows tools to have an ability to run to windows. Anyway I still cannot configure the dual boot. Please help :)

  Read the article

• Boots up into Terminal

  - by Jacob Larson

  I am running a 64 bit version of Ubuntu 12.04.1, and I when I boot up, I am thrown (Rather violently. :P) a full-sized terminal, instead of my lovely GUI login screen.. So I looked around and tried the "startx" command, which works like a charm. Only problem is that now, I have no clue how to keep it from booting to the terminal every time, and boot up into the regular GUI with all my stuff. I did install some kernel updates the night before, though I restarted my computer twice after I had done so without a problem. Thanks for your time!

  Read the article

• Please help ubuntu or any other linux os is not booting from cd or usb

  - by Amith

  I will tell you the whole story,one night when i was using KDE on Ubuntu 10.10 Kwin crashed then i shut down the os next day when i booted it the display came completely garbled and i went to safe graphics mode ,it worked and in reinstalled the Nvidia drivers and then restarted .Then immediatly, It said No init found Busybox XX.XX then I thought ill do a fresh install I inserted the ubuntu cd provided to me by Canonical.When i pressed 'try ubuntu without installing' instead of the graphic boot screen i saw.Ubuntu 10.10 in regular text and a progress bar few seconds after that the screen was flooded with error messages first alot of white then red.I then went to my win7 installation and saw a website which told me to find a Ext3 reader and format the ubuntu partition and the swap.I did that and when i restarted. GRUB configuration not found grub> Then it took my win 7 ERD and restored 7's bootloder Xp and 7 were working i put in the livecd again,Same error,Now usin my seven,Please help geeks,Ive even tried Knoppix,Fedora,Debiane.t.c they wont boot and i want to retain my win 7 and winxp partitions,I really miss linux.

  Read the article

• restoring grub when Windows 7 MBR lost it

  - by Trent Hall

  My dual boot desktop was running only Windows 7 until it crashed on a windows update. Couldn't get it started again even after all the usual things that might fix it, so I installed Ubuntu 12.04, which has worked very well. unfortunately Carbonite doesn't run on Linux yet, and so I called Microsoft support to see if we could be Windows 7 up and running. Their attempts to get Windows 7 running resulted in writing a new MBR for windows, which failed and also somehow caused the loss of ability to boot into Ubuntu also. How can I get back to Ubuntu? I don't want to lose my settings in Ubuntu. Thanks... Trent

  Read the article

• Stuck while Booting Text Mode in Ubuntu 12.04?

  - by sameetandpotatoes

  I edited the /etc/default/grub file and changed: GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash” to GRUB_CMDLINE_LINUX_DEFAULT=”text” This does make Ubuntu boot up into text mode; however, it gets stuck while booting up and it does not show me the login text. Instead it says something like this: Begin running /scripts/init-bottom USB hub found ...More irrelevant things... *Stopping LightDM Display Manager I can press Ctrl + Alt + F2 and see the login and boot up like normal, but is there any reason for this? How can I change it so it does not get get stuck? Edit: After 5 minutes, a new line came up: 557.1206341 ieee80211 phy0: channel change: 5540 -> 5560 failed (3).

  Read the article

• Ubuntu - Black Screen After Suspend

  - by EssAm

  I used Ubuntu with no problems and I upgraded to 11.10 and everything was fine. But when I did my first suspend I was not able to boot again, all I got was a black screen no bios screen, nothing just blank, I tried doing hard reset but when I power on again same happens. I tried ctrl+alt+delete F1-F12 but i think the keyboard is not working, also tried booting from CD but all I got was blank screen, the hard disk light is not blinking at all so i'm assuming it's not trying to boot. My laptop is Toshiba satellite with ATI Radeon graphics. Hibernate was working fine though. I searched the net for solutions but with no luck. Any ideas?

  Read the article

• GRUB 2 Error : No such disk

  - by Chandra Sekhar

  I have gone through many pains to boot through my windows 7 partition. I had windows 7, then one fine day I installed Ubuntu and again formatted the partition where Ubuntu was installed only to find the my Windows does not boot(Probably corrupted MBR). I again installed Ubuntu later but the Grub could not detect windows. So I manually added windows by editing the file 40_custom. But when I select the win7 entry in the grub, it displays the error : no such disk. What do I do?? Additional Info : Ubuntu version : 11.10 x64|| Win 7 Home premium, 64 bit|| While in the process of debugging I once also came across the error : Sector 32 being in use by FlexNet.|| Strongly in need of booting my Win 7 without any formats or fresh OS installations. Thankful for any Diagnostics and Solutions to my problem.

  Read the article

• Login speed varies over time

  - by Brock Dute

  I have a weird problem with my Ubuntu right now. My login speed is never consistent for months, sometimes it changes within weeks. What I mean is, for example, within 2 weeks, boot time is really fast and speedy but then say after that, boot time becomes noticeably slower. Usually, right after the ubuntu login sound plays, my desktop would've finished loading already but sometimes, the ubuntu login sound is already done playing and I'm still in this stage of the login -- image, exactly like that. Any reasons for this? Sometimes it slows down after updates (which I think is kind of normal?) After a few reboots, it becomes fast then randomly it becomes slow again.

  Read the article

• Why dosn't Ubunto like my HP Pavilion G7?

  - by user109379

  I installed Ubunto onto my HP Pavillion G7 1330dx without much problem, but it took 3 or more tries to get it to boot up after. Then , I started over and installed Mint, no problems installing or booting up. BUT, I decided I I liked Ubunto better so I wiped my hard drive and installed Ubunto ( this time the 32 bit) ,It runs great once i finally get it to boot, it takes 3 or more tries again. Whats the deal? I really like it but really don't know what I'm doing. I've been a Windows guy until a couple days ago.

  Read the article

• Grub failure after cat removed USB drive

  - by user76270

  I had a perfectly working Ubuntu Server system with U12.4 and Server installed and was setting up the mail system. When I was absent from my computer room my cat (furry type) apparently got to play with a USB dongle on an extension cable and removed it. The system went berserk and now will not boot. I ran Ubuntu 12.4 on the install disk and the directory structure and every thing appears to still be on the drives. How do I recover the GRUB boot section without the system repartitioning everything and wiping everything else? Please I am a total newb when it comes to Linux errors and fixing them.

  Read the article

• Ubuntu hangs on booting up after a update

  - by alFReD NSH

  I've made a clean install yesterday, for the first time restarted, everything went good and then after I updated packages and copied my old home directory to replace the new one, when I restarted it hung when it was booting. I tried reinstalling again and doing the same thing, but again same thing happened. Here's what I see, before when the Ubuntu logo with the five dots is shown: Then after that, 3 or 4 of the dots will load and hangs there. If I press arrow up before that, this will be shown I started my laptop again today(the pictures are for the day before) and after that, boot up with live CD and got the logs. dmesg: http://pastebin.com/aVxV7BQF syslog: http://pastebin.com/4E2BrRUK And some info: alfred@alFitop:~$ uname -a Linux alFitop 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: http://pastebin.com/AZbKJmsT sources.list : http://pastebin.com/2HazmuyV My problem is a bit similar to here: http://ubuntuforums.org/showthread.php?t=1918271 Though I didn't change my x.org config. Only changed home directory and updated packages. I've tried memtest and fschk, both passed. In the recovery mode boot option, I've also realized that same things happen in failsafe graphical mode. But when I go into the network mode, I can boot up my system, but of course same the graphics are just basic. Adding blacklist intel_ips to /etc/modprobe.d/blacklist.conf solves the first message, but still I get the broken pipe and CPU stack traces. The current kernel version is 3.2.0-25, I've tried booting up in the 3.2.0-23(the one the installer came with, but same results.) Also uninstalled apparmor, didn't help. I've installed Ubuntu again, this time without copying the home directory, also same result. --- UPDATE --- This problem was solved before with removing backports, but its back again! I've updated my laptop last night and the problem came back. It's definitely one of these packages. My /var/log/apt/term.log and /var/log/apt/history.log. I'm almost having the same situation. --- UPDATE --- I realized this also have happened on times that I have updated(haven't restarted after it) and my computer power has been cut off and its shutdown due to lack of power. And I realized if I just do as I answered but not in somewhere without GUI(networking mode has the GUI) it wouldn't work.

  Read the article

• 'Invalid or corrupt kernel image' error while booting from USB stick

  - by steve

  I got the Ubuntu 11.10 32-bit edition and i used Unetbootin to write the ISO to a usb stick.After that i tried to boot from the stick,having changed the BIOS boot settings,and when the first interface shows up with the choices of istallation,whatever choice i select i got the message"invalid or corrupt kernel image".I use a netbook with windows 7 on it.I tried different usb sticks but same again.I also tried Universal USB installer instead of Unetbootin but same again.Any idea of what happens?I am using ASUS 1000H.The USB doesn't work in one more PC i tried to,but i also tried a second USB to both of the two computers and same again. I downloaded the ISO image once again and follow the same procedure but same again

  Read the article

• Booting briefly shows CLI login and then black

  - by lepusfelix

  When I boot to Ubuntu on my dualboot system, it appears to boot normally, up to the point when I would normally expect to see the lightDM graphical login screen. However, I see a CLI login screen, which I assume is tty1. Before I get a chance to actually login to it, though, it drops to a black screen with a flashing cursor. Pressing ctrl+alt+f1 does nothing. When I hit the power button on the laptop, I see the usual scrolling text as Ubuntu shuts down. I know that this is related to me having installed the proprietary ATI drivers for the video card. Purging the drivers gave me back a GUI, but unfortunately no working desktop environment, and switching to the mesa drivers returned me to the black screen issue. The only way I can get a stable working CLI is through booting to advanced options and choosing a root shell prompt, as even the failsafe X session doesn't function for me.

  Read the article

• GRUB2 panic: "No such partition"

  - by Android Eve

  I managed to install 10.04 on a system that already has 8.04 (separate partitions, of course). It also installed GRUB2 onto the MBR. After discovering that there is no menu.lst anymore, I edited /etc/grub.d/40_custom to point to where my other OS partitions are: menuentry "Ubuntu 8.04" { set root=(hd0,0) linux /boot/vmlinuz-2.6.24-28-generic initrd /boot/initrd.img-2.6.24-28-generic } menuentry "Windows 7 Ultimate 64-bit" { set root=(hd0,2) chainloader (hd0,2)+1 } GRUB2 displays the menu with those entries but when I select any of them, it refuses to load them, saying "No such partition". I know the partitions are there, as 10.04's "Disk Utility" sees them without any problem. How do I get GRUB2 to recognize them?

  Read the article

• ubuntu booting problem with 12-04

  - by Jazzy

  i installed ubuntu through USB .. instillation was proper. but when i restarted my laptop it dint boot. so planed install it again when started selected install from USB. it booted ma previous installed ubuntu.. so after wen ubuntu boots no need of that pen drive.. so in short .. eveny time i want to start my pc i need that pendrive to boot .. so please help me out this. PS : sorry for the english

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >