Search Results

Search found 2073 results on 83 pages for 'digital agenda'.

Page 68/83 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

  • SYS-5016T-MTFB will not POST without manual assistance (Motherboard: X8STi-F)

    - by Dan
    I have a Supermicro 5016T-MTFB 1U server which I am in the process of setting up, but it has a really strange problem. When the system is powered on it will not POST until I press the reset button a few times, followed by pressing the delete key on the keyboard to "wake it up". If I power it on and do nothing, the fans spin up but nothing else happens at all. After pressing the reset button once, the red "overheat" light comes on and blinks which is supposed to indicate a fan failure - but all the fans are working. Pressing reset again usually stops the blinking, and the system starts the normal POST routine but it will not actually get to the bios screen unless I press delete. If I don't press delete, it just continues to hang. After pressing delete it will take me into the bios setup screen, if I exit without saving changes I can boot the system normally. I was able to successfully install Linux with no trouble...but upon rebooting the same problem happened again. This board has integrated IPMI which I thought was the problem, so I disabled it via the jumper on the board. Did not help. Each time this system powers on, it goes on for a second, then turns off again for another second, then turns back on again. I don't know why it does that. Here is what I put in the system: 1 x Xeon E5630 (Nehalem) 80W TDP (it's not overheating, CPU temps stay under 40 degrees C) 2 x Kingston 2GB x 3 DDR3-1066 Memory ECC, unbuffered, unregistered (kvr1066d3e7sk3/6g) 1 x Intel X25-M 160 GB 2 x Western Digital RE3 1TB

    Read the article

  • Registration is open - JD Edwards Summit in Dubai

    - by Hartmut Wiese
    Dear all, the registration is now open for the 2nd ECEMEA JD Edwards Summit in Dubai. The event is taking place from NOV 17-21. Please see Agenda details and registration links on those two pages:  Partner and Employee Registration Page:eventreg.oracle.com/profile/web/index.cfm?PKWebId=0x285012625 Customer Registration Page:http://eventreg.oracle.com/profile/web/index.cfm?PKWebId=0x285012625 Partner have to pay a fee and with the registration each partner confirms to do his/her payment. Only accepted method of payment is through PayPal. You will receive a separate email after registration with additional details. Prices are the following: - NOV 17-18: USD 100 per Partner registration - NOV 20-21: USD 100 per Partner and Customer registration (NOV 19 is free of charge, Partner Sponsors can register up to 4 people free of charge for the whole event) After the registration you receive an automatic workflow message which is not the registration confirmation. We first have to check the capacity and once you are approved you will receive a separate email with your registration confirmation. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Speciality this year: An invitation letter can be created for Employees only. The fastest way for Customers/Partners to get a Visa is talking to your hotel or airline. This is an established process within this region Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} One workshop is pretty interesting for “JDE in a box” Partner. One standard training (Introduction to Oracle Solaris V.11) was used and we have added some specific content about how to create a “JDE in a box” solution for the X3-2 / T4-1 combination. A “JDE in a box” solution is a Partner Go-to-Market solution where Oracle is helping each partners in identifying the components to use and where we also want to leverage our experiences and help our Partner to successfully combine this to a Partner offering.Target audience are Partner with no or limited Solaris/Sparc knowledge.This is the first version of this training and we all will learn from this experiences. I hope to see a lot of JDEdwards interested people in Dubai during the five days of the event.

    Read the article

  • Win 7 (SP1) Creationg of System Image failure... seems absurd. (0x80780119)

    - by DSKauai16
    This question seems to keep coming up in Microsoft Answers. Unfortunately, it never seems to be solved... on Microsoft Answers. Hopefully someone here will have a better idea. I'm trying to create a system image. It's not working. I have just re-installed windows as of a few hours ago. I have an admittedly older Western Digital 148 GB USB portable HDD which is not just completely empty, but I even did a long format with the NTFS file system just to be sure. The reinstallation of windows and a couple of programs take up 40 GB (seen below) When I try to create a System Image onto the USB HDD, I am told that there is not enough room. Obviously, this is wrong. The screen captures show exactly the steps that are happening to lead me to 0x80780119. I haven't done anything but put on Windows 7 (32bit; SP1) and install some programs. I haven't even done anything with them. There's almost zero in the way of data, and I checked that yes, the HDD works to accept data, send data and work with data. I've used the drive successfully for a long, long time. What's going wrong?

    Read the article

  • How to find out which program a default beep is coming from in Windows 7?

    - by leeand00
    There's a "default beep" (as defined in System Sounds) that emanates from my computer every so often. It kind of goes like this (where each number is a "default beep" sound): 1, 2, 3, 4, 5. So there's a distinct pattern to it. I thought I had this figured out a way to figure out what was happening by going to Control Panel-Ease of Access-Ease of Access Center-Replace sounds with visual cues But that just isn't the case. Whichever window I click on, that one displays the visual queue when this happens. It's driving me crazy, and I can't figure out which program is causing this. Update: it appears to only happen on one user profile on the computer...does that help? Update 2: Discovered that this sound was coming from a utility on my laptop called ASUS NB Probe; I'm certain that it is emanating from this program because the error message displayed by it changes in sync with the sound playing. Apparently the S.M.A.R.T. feature of my hard drive was reporting an issue. It displays the issue for a brief second and then makes it disappear, I'll have to keep watching it to see what it says, but I believe is says something about a read. I have an external hdd connected with eSATA to a container of sorts (BlacX) that you can plug two hdds into. I have one hdd attached and it's a Western Digital WD1001FALS - 00E8B0 Thanks again! Now I'm off to go around the Internet and report on this...since I posted it so many places!

    Read the article

  • New Dvds with 99 Title tracks, which one is the correct track?

    - by Mike Fielden
    I have embarked on the task of backing up my DVD collection. I have noticed that some of the newer movies I am attempting to rip contain 99 Title tracks all with approximately equal overall run times. I use MacTheRipper to rip the DVDs and Handbrake to encode them. My question is, is there a site somewhere that has information regarding which Title track to select? Disclaimer: I cannot stress this enough, I legally own these DVDs. I am merely making a digital copy. Two examples of such DVDs are Star Trek and Carriers. UPDATE: Just an FYI each most of these 99 tracks appear to be the full length tracks. There times look to be very similar to the overall movie run time (within a few seconds of each other). So using the time isn't a valid way to tell which is the correct track. Opening the movie with VLC seems to be the best way to tell. Thank you all.

    Read the article

  • Why are FMS logs filled with 'play' event status code 408 for a failed webcast?

    - by Stu Thompson
    Recently we had a live webcast event go horribly wrong. I'm doing the technical post-mortem, with limited information. We know that the hardware encoder (a Digital Rapid Touch Stream Web HDI) was unable to send upstream at a sustained reliable high rate. What we don't know is if the encoder's connection was problematic (Zürich), or that of the streaming server (in Frankfurt). Unfortunately, I've got three different vendors all blaming each other (the CDN who runs the server, the on-site ISP and the on-site encoding team.) In the FMS log files I see a couple of interesting things: Zillions of Status Code 408 on play event entries for clients. Adobe's documentation stats that this "Stream stopped because client disconnected". ("Zillions" would be a ratio of 10 events for every individual IP address.) Several unpublish / (re)publish events per hour for the encoder I'd like to know if all those 408s could tell me with authority that the FMS server was starved for bandwidth, or that the encoding signal was starved (and hence the server was disconnecting clients.) Any clues?

    Read the article

  • Robocopy launches and then hangs/just sits there

    - by NateO
    I'm setting up an archive process to store old files on an external hard drive. The computer in question is running Windows 7 Pro 32bit. We have a server folder with 150,000+ files in it, most of which are pretty small (below 200k). I'm trying to use robocopy in a batch file to do this. It was working fine the other day, now all it does upon launch is sit there. It shows me all the options and whatnot, and also lists the number of files in the directory and the directory itself, but it never gets past that line. If I switch the destination to the local C drive, it eventually starts copying files. Is there something in my batch file that needs to change? Or could there be a problem with the external Western Digital drive that I'm using? The WD drive currently is holding about 175,000 files. Here is the one line batch file I have: robocopy "\\cgifp01\Prepress\Public\ImportedPDF" "E:\OldFiles" *.* /R:2 /W:10 /MINAGE:15 /MOV /B /XJ /XF "blank_test.pdf" Thanks for any tips or ideas. Nate

    Read the article

  • Portable USB drives hidden pertition - New request

    - by ZXC
    This question was made by Francesco on Jul 29 '11 at 17:14. and the replies were not satisfactory due they not point to an important problem that´s: Why could anyone want to make certain data only accesible for a program but not to the users?. For example: If I want to do a safe distribution of original music for demostration purposes I will need several requisites: 1) The music should be heard using a simple procedure like selecting the name of each song on a playlist of a mediaplayer. 2) The portable media, ussually a portable USB drive, must hide for complete and should make unaccesible the files that contain the audio data to anything but the mediaplayer, that must be in the first partition, the one that is visible. 3) Considering that´s impossible to really hide files in a non-hidden partition, a second hidden partition should be created in the USB drive and the audio data will be stored there. 4) The trick is to read the audio data files stored in the hidden partition with a mediaplayer stored in the visible partition, the media player also should be a complete standalone program and independent from any library of the operating system except of the OS audio system. 5) The hidden partition should have a copy protection scheme that could impede to do copies of the data or create working ISO images of it. I know that this description could not be technically accurate but it has a complete logic from the needs of a music producer against the problem of piracy. The philosophy that surrounds the concept is to transform a virtual object like a digital string of audio in a solid object like the analog vinyl discs are.

    Read the article

  • Einladung zur Oracle SE University am 13./14. Dezember 2011

    - by A&C Redaktion
    Sehr geehrte Oracle Partner, die erste Oracle SE University wird von Azlan und Oracle gemeinsam ins Leben gerufen, dazu laden wir Sie herzlich ein. Zielgruppe sind die technischen Ansprechpartner aller Oracle Partner. Wir bieten Ihnen in Fulda einen umfassenden Überblick über aktuelle Technologien, Produkte und Dienstleistungen mit den Schwerpunkten Oracle on Oracle, Positionierung und Architektur. Dabei werden sowohl bewährte Software-Produktbereiche wie Datenbank und Fusion Middleware beleuchtet, als auch klassische Hardware-Themen wie Systems, Storage und Virtualisierung. Die Agenda finden Sie hier. Top-Referenten garantieren Ihnen qualitativ hochwertige und technisch anspruchsvolle Vorträge.  Projektberichte aus der Praxis bringen Ihnen Kernthemen näher, um mit diesem Wissen zusätzlichen Umsatz zu generieren. Nutzen Sie darüber hinaus die Möglichkeiten zum Networking, die im täglichen Geschäft Gold wert sind.Logistische Informationen: Termin: 13. - 14. Dezember 2011 Ort: Fulda - bietet als die Barockstadt Deutschlands einen reizvollen Kontrast zu unseren technischen Themen. Aber vor allem liegt Fulda fast genau in der geographischen Mitte Deutschlands und ist via einem modernen ICE-Bahnhof bestens von ganz Deutschland aus zu erreichen. Hotel Esperanto Kongress- und Kulturzentrum Fulda: Vom Bahnhof aus gehen Sie gemütliche zwei Minuten um die Ecke und kommen direkt ins Hotel. Für PKW Fahrer sind ausreichend Parkplätze direkt am Hotel vorhanden. Zielgruppe: SEs, technischer Vertrieb, technische Consultants Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-fareast-language:EN-US;} Konzept der Oracle SE University: Plenum Sessions und Keynote mit strategischen Übersichtsthemen Break Out Sessions (4 Sessions parallel) mit technischem Tiefgang Technologie, Projekterfahrungen, Architekturen, Lösungsszenarien u.v.m. Networking: bei einem gemeinsamen Abendessen am 13.12., ab 19.00 Uhr. Im hauseigenen Grill-Restaurant "El Toro Nero" gibt es die brasilianische Spezialität "Rodizio". Die Teilnahme zur Oracle SE University inklusive dem gemeinsamen Abendessen ist für Sie kostenfrei, die Übernachtungskosten werden von Ihnen selbst getragen. Melden Sie sich bitte bis spätestens 30.11. zur Oracle SE University hier an. Wir haben ein Zimmer-Kontingent reserviert, die Buchung bitten wir Sie online selbst vorzunehmen. Bitte geben Sie bei der Buchung das Stichwort „Oracle SE Uni“ an, damit erhalten Sie den Sonderpreis von 102,- Euro inklusive Frühstück. Wir freuen uns, Sie in Fulda zu begrüßen! Joachim Hissmann Birgit Nehring Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Manager Key Partner HW Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Direktor Software & Solution Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Oracle Deutschland Tech Data/Azlan ================================================================= Kontakte Azlan:Peter MosbauerTel.: 089 [email protected] Robert BacciTel.: 089 4700-3018 [email protected] Oracle:Regina SteyerTel.: 0211 [email protected]

    Read the article

  • Force spin-down of external hard-drive on linux (raspberry pi)

    - by user258346
    I'm currently setting up a home-server using a Raspberry Pi with an external hard-disk connected via usb. However, my hard-drive will never spin down when being idle. I tried already the hints provided at raspberrypi.org ... without any success. 1.) sudo hdparm -S5 /dev/sda returns /dev/sda: setting standby to 5 (25 seconds) SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2.) sudo hdparm -y /dev/sda returns /dev/sda: issuing standby command SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...and 3.) sudo sdparm --flexible --command=stop /dev/sda returns /dev/sda: HDD 1234 ... without spin-down of the drive. I use the following hardware: Inateck FDU3C-2 dual Ports USB 3.0 HDD docking station Western Digital WD10EZRX Green 1TB Is it possible, that the sent spin-down-signals are somewhere overwritten/lost/ignored?

    Read the article

  • Ubuntu Server mdadm drbd ocfs2 kvm hangs under heavy file reading

    - by Stefano Annese
    I have deployed four ubuntu 10.04 server. They are coupled two by two in a cluster scenario. on both sides we have software raid1 disks, drbd8 and OCFS2 and on top of it some kvm machines run with qcow2 disks. I followed this: Link corosync is just used for DRBD and OCFS, the kvm machines are run "manually" When it works is fine: good performances, good I/O, but at a given time one of the two cluster started hanging. Then we tried with just one server turned on and it hangs the same. It seems to happen when an heavy READ in one of the virtual machines occurs, that is during rsyn backup. When the fact occurs the virtual machines are not reachable any more and the real server responds with good delay to the ping but no screen and no ssh is available. All we can do is force shutdown (hold the button) and restart and when it turns on again the raid on which relay drbd is resyncing. All the time it hangs we see such fact. After a couple of week of pain on one side this morning also the other cluster hung, but it has different moteherboard, ram, kvm instances. What is similar is reading for rsync scenario and Western Digital RAID Edistion disks on both side. Can anybody give me some input to solve such issue?

    Read the article

  • How does the "Steam" platform work? Is it DRM? Can I trust "Steam"-powered software? [closed]

    - by Chris W. Rea
    So – I just bought the new game Supreme Commander 2. This question is not about the game, but about the online software installation platform that it seems to require. I haven't bought a game in a long time, and I'm puzzled: Apparently, SC2 is a "Steam"-powered game. When I went to install the game, it asked me to either create a new Steam account, or log in with an existing account. I clicked "Cancel" because I don't plan to play online and I don't want anything unnecessary installed on my computer, since I only plan to play single player! However, after clicking "Cancel", the installer asked for my confirmation that I indeed wanted to cancel installation of the game! I thought I was just canceling the "online" portions! So I really want to know: How do "Steam" powered games work? Is this essentially a form of DRM (Digital Rights Management)? Can I trust this software platform? Has anybody done any independent verification on how this platform works? (I'm very leery of any DRM after the Sony BMG CD copy protection scandal. Thank goodness for Mark Russinovich.) Does the "Steam" platform install anything particularly nasty or unwanted on my computer? High-rep users: Please vote to reopen this question. It is not about the game, but about the software update platform / updater / DRM. Imagine if the software in question were a productivity application. The issues remain the same.

    Read the article

  • Ubuntu lucid, maverick high iowait

    - by netom
    I'm using Ubuntu, and I've got the same problem with Lucid and Maverick. From time to time, especially a few minutes after boot, the iowait goes between 50-100% and the box is unusable. Everything that tries to access the disk freezes. I have the following setup: Hard disk: Model Family: Western Digital Caviar Green family Device Model: WDC WD15EADS-00P8B0 Serial Number: WD-WMAVU0391287 Firmware Version: 01.00A01 User Capacity: 1.500.301.910.016 bytes I have a quad core Intel Core2 Q6600 processor, and 4G of memory. When the high iowait occurs, usually 4 processes are active: kdmflush (two procs) jbd2/dm-0-8 jbd2/db-1-8 and a few more starving user processes of course. I know this from top and iotop. Any suggestions about why this is happening? There are a lot of q/a-s about linux and high iowait, but none of them helped so far, I even tweaked the hard disk not to park the head in every 8 seconds (Load cycle count is 50334!!!!! :o ), but nothing. Problem persists. Thank you in advance.

    Read the article

  • Mac Grey/White Screen of Death

    - by cust0s
    The other night I updated my iTunes to the latest version (through Software Update) when I came to turn on my computer I was greeted with the dreaded white screen of death. I use an early 2008 iMac 24". I've tried the basic things, unplugging/turning off accessories, trying to boot from the install disk, reseting pram, etc, etc. Still no luck and no change what-so-ever. All I've been able to ascertain that my keyboard still works (by ejecting). I should point out that I did recently replace my Hard drive with a Western Digital Black 500GB (though the computer is well out of warrenty) and I'm a little concerned that the problem could be the screen. Update (18/05/10): I've been told that I could be getting the White/Grey screen of death because the optical flex cable is damaged (aparently this is common). Apparently the Optical Drive is part of the POST sequence, and an inability to read the drive can result in failure for the system to move on to other bootable volumes. More info here. I will disable the optical drive and see if that works.

    Read the article

  • Reduce power consumption of gaming computer while idle

    - by White Phoenix
    This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

    Read the article

  • Is it possible/practical to install and run Linux on a USB flash drive?

    - by Graeme Donaldson
    I'm going to replace my old 2004 vintage desktop PC soon and I have an idea of what I want to do, I'm just not sure if it's possible or realistic. In the time since I built the old PC it has slowly become less used as a PC and more as a file server, so I figured I'd build a small file server which could also function as a router/DHCP/DNS/whatever box. The idea is to base it on an Atom system. I have my eye on the Intel D510MO for the moment. This supports 2 SATA disks, and I'd prefer to dedicate those to data storage. I'd like to install Ubuntu Server or maybe Debian on a 8/16GB USB flash drive. I have seen plenty of tutorials on how to perform an installation from a USB drive, but I can't seem to find any info on actually booting and running the OS from USB flash. Is this even possible? Is it practical? This box will mostly be used for: Making backups of mine and my wife's notebooks via LAN. Will use SMB or NFS for this. Digital media storage, which will be accessed by a Mede8er box with no storage of its own. I will most likely use NFS for this.

    Read the article

  • How does the "Steam" platform work? Is it DRM? Can I trust "Steam"-powered games?

    - by Chris W. Rea
    So – I just bought the new game Supreme Commander 2. This question is not about the game, but about the online software installation platform that it seems to require. I haven't bought a game in a long time, and I'm puzzled: Apparently, SC2 is a "Steam"-powered game. When I went to install the game, it asked me to either create a new Steam account, or log in with an existing account. I clicked "Cancel" because I don't plan to play online and I don't want anything unnecessary installed on my computer, since I only plan to play single player! However, after clicking "Cancel", the installer asked for my confirmation that I indeed wanted to cancel installation of the game! I thought I was just canceling the "online" portions! So I really want to know: How do "Steam" powered games work? Is this essentially a form of DRM (Digital Rights Management)? Can I trust this software platform? Has anybody done any independent verification on how this platform works? (I'm very leery of any DRM after the Sony BMG CD copy protection scandal. Thank goodness for Mark Russinovich.) Does the "Steam" platform install anything particularly nasty or unwanted on my computer?

    Read the article

  • SATA Windows 7 Problems

    - by Isaacs
    Scenario: Core 2 Duo processor, Gigabyte MB, 4 SATA Western digital 500 GB hard drives, windows 7 64 bit. Problem: Copying data from USB or among SATA hard drives is faulty. When trying to copy 20GB from one HD to another it starts off with normal ~14-15 MB/s transfer rates and eventually bogs down to < 120KB/s transfer rates. If I leave it alone over night I come back with my computer crashed and setting at BIOS detecting hard drives. Troubleshooting: Removed all but 1 HD with OS on it, everything seems to be happy. I can copy large files from USB HD to main/single HD. Ran SpinRite on all hard drives, no errors found. Tried adding one HD to machine and problem exists, tried switching SATA cables, and SATA ports on MB. Reinstalled windows 7 x2 (from different disks..). Oddly enough if I boot to a ubuntu everything works fine. Getting ready to purchase a new MB, but wanted to see if anyone had suggestions. Thanks!

    Read the article

  • External USB HD with -optional- mains?

    - by Stephen
    Hi, I'm Christmas-present-buying, and I'd appreciate recommendations for a USB HD with an optional mains power input. I've hunted, but can't find all the information I want (partially due to sketchy product specifications). Background: This is for a digital TV which I do not own, and so I'd like to get it correct first time. The TV has a USB port to allow recording straight to disk, but the manuals don't say how much power can be drawn through the USB port. The manual's instructions state, possibly generically, to plug the drive in before connecting to the TV. Ideally I'd like a small (2.5"?) drive which can draw power over USB, with an mains power input if it turns out the USB port on the TV doesn't offer enough juice. The ideal is to use one cable, two max. A powered USB hub would introduce too much clutter. I've spotted that the LaCie Petit drives have what appears to be an additional power input, but I'm not even sure from the specs what that is. And the device doesn't ship with a mains adapter. Suggestions?

    Read the article

  • FreeBSD ZFS RAID-Z2 performance issues

    - by Axel Gneiting
    I'm trying to build my own network attached storage based on FreeBSD+ZFS+standard components, but there are strange performance issues. The hardware specs are: AMD Athlon II X2 240e processor ASUS M4A78LT-M LE mainboard 2GiB Kingston ECC DDR3 (two sticks) Intel Pro/1000 CT PCIe network adapter 5x Western Digital Caviar Green 1.5TB I created a RAID-Z2 zpool from all disks. I installed FreeBSD 8.1 on that zpool following the tutorial. The SATA controllers are running in AHCI mode. Output of zpool status: pool: zroot state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raidz2 ONLINE 0 0 0 gptid/7ef815fc-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/80344432-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/81741ad9-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/824af5cb-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/82f98a65-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 The problem is that write performance on the pool is very very bad (<10 MB/s) and every application that is accessing the disk is unresponsive every few seconds when writing. It seems like writing is fine until the ZFS ark cache is full and then ZFS stalls the entire system I/O till it's finished writing that data. Also I'm getting kmem_malloc to small kernel panics. I've already tried to put vm.kmem_size="1500M" vm.kmem_size_max="1500M" into /boot/loader.conf, but it doesn't help. Does anyone know what's going on here? Am I really not having enough memory for ZFS to handle this RAID-Z2?

    Read the article

  • What would cause my Windows machine to seize?

    - by Coltin
    I run Windows XP SP2 on a Desktop I built (I know that doesn't provide much, but I can't say "on a Dell X103938R" or something). It has 'seized' about 7 times in its year and a half life. Everything freezes. I can't move the mouse cursor and the keyboard seems unresponsive. I can turn the monitor on and off and it will hold the last image. The light for the mouse is responsive if I move it. The keyboard lights change when pressed (cap locks, etc). I've waited upto ten minutes for a change, nothing. I haven't connected any activity to the seizing. It's happened when all I was "running" were fullscreen programs (games), just checking email, or once when I was sitting at my desktop (I was reading a book and when I tried to use the mouse, nothing). I've never been able to figure it out. I have to hard reset, and then its fine. It doesn't file system check or anything (not sure if Windows does that). No error when I load up the computer, nothing. If I had uTorrent open, it will have to recheck the torrent files to make sure they weren't corrupted though. (It's not always open when it seizes either). I'm using an AMD Athlon 5400+ with a NVidia GeForce 8600 GT, if that helps. I'm using two hard drives, 500Gb Wester Digital with a 1Tb Hitachi.

    Read the article

  • How to fix display on external Samsung Syncmaster shifted to the right when connected to Macbook Pro?

    - by joe larson
    Is there something special I need to do to be able to use external LCD displays with my new MacBook Pro? Do I need extra software, or do I possibly need a different cable? I'm attempting to use an external display with my MBP. I've got a "Mini DisplayPort to VGA Female Adapter for Mac", plugged into the thunderbolt port on my MBP, which I understood should be compatible with thunderbolt. I've tried this with three different SyncMaster models: a B2330 (21.5"), a EX2220 (22"), and a third (also 22" ish) which I don't have the model # for -- but all are 1920x1080 resolution; plus an additional HP monitor of similar size and resolution. In all four cases, the MBP recognizes the screen and choses the correct resolution. However, the display is shifted over about 1 inch. This is true no matter if I change screen resolutions also. The controls on the monitor for horizontal position don't help. Also, sometimes (especially if I drag an app over into the second screen), the screen starts skipping left to right and having bands of fuzz. Additionally, the monitor will periodically blink off for a moment, trying to switch from Digital to Analog and back (the Syncmaster shows text on the screen to tell you it's trying to do this). Often when it comes back from one of these blank-outs, it will show OK (no skipping or fuzz) but still shifted right; then after a few seconds it will go wrong again skipping and fuzzy. This photo shows the worst of it. I've added red rectangles to show the physical edge of the screen, and a yellow rectangle to show the empty space on the left of the screen. (Sorry for the awful quality and lighting!) Also, it's worth noting I am on Mac OS X 10.6.7, and yes I have this update 1.4 installed.

    Read the article

  • ubuntu 9.10 installer doesn't recognize the hard drive

    - by dan
    I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

    Read the article

  • Thought Oracle Usability Advisory Board Was Stuffy? Wrong. Justification for Attending OUAB: ROI

    - by ultan o'broin
    Looking for reasons tell your boss why your organization needs to join the Oracle Usability Advisory Board or why you need approval to attend one of its meetings (see the requirements)? Try phrases such as "Continued Return on Investment (ROI)", "Increased Productivity" or "Happy Workers". With OUAB your participation is about realizing and sustaining ROI across the entire applications life-cycle from input to designs to implementation choices and integration, usage and performance and on measuring and improving the onboarding and support experience. If you think this is a boring meeting of middle-aged people sitting around moaning about customizing desktop forms and why the BlackBerry is here to stay, think again! How about this for a rich agenda, all designed to engage the audience in a thought-provoking and feedback-illiciting day of swirling interactions, contextual usage, global delivery, mobility, consumerizationm, gamification and tailoring your implementation to reflect real users doing real work in real environments.  Foldable, rollable ereader devices provide a newspaper-like UK for electronic news. Or a way to wrap silicon chips, perhaps. Explored at the OUAB Europe Meeting (photograph from Terrace Restaurant in TVP. Nom.) At the 7 December 2012 OUAB Europe meeting in Oracle Thames Valley Park, UK, Oracle partners and customers stepped up to the mic and PPT decks with a range of facts and examples to astound any UX conference C-level sceptic. Over the course of the day we covered much ground, but it was all related in a contextual, flexibile, simplication, engagement way aout delivering results for business: that means solving problems. This means being about the user and their tasks and how to make design and technology transforms work into a productive activity that users and bean counters will be excited by. The sessions really gelled for me: 1. Mobile design patterns and the powerful propositions for customers and partners offered by using the design guidance with Oracle ADF Mobile. Customers' and partners' developers existing ADF developers are now productive, efficient ADF Mobile developers applying proven UX guidance using ADF Mobile components and other Oracle Fusion Middleware in the development toolkit. You can find the Mobile UX Design Patterns and Guidance on Building Mobile Apps on OTN. 2. Oracle Voice and Apps. How this medium offers so much potentual in the enterprise and offers a window in Fusion Apps cloud webservices, Oracle RightNow NLP and Nuance technology. Exciting stuff, demoed live on a mobile phone. Stay tuned for more features and modalities and how you can tailor your own apps experience.  3. Oracle RightNow Natural Language Processing (NLP) Virtual Assistant technology (Ella): how contextual intervention and learning from users sessions delivers a great personalized UX for users interacting with Ella, a fifth generation VA to solve problems and seek knowledge. 4. BYOD Keynote: A balanced keynote address contrasting Fujitsu's explaining of the conceprt, challenges, and trends and setting the expectation that BYOD must be embraced in a flexible way,  with the resolute, crafted high security enterprise requirements that nuancing the BYOD concept and proposals with the realities of their world of water tight information and device sharing policies. Fascinating stuff, as well providing anecdotes to make us thing about out own DYOD Deployments. One size does not fit all. 5. Icon Cultural Surveys Results and Insights Arising: Ever wondered about the cultural appropriateness of icons used in software UIs and how these icons assessed for global use? Or considered that social media "Like" icons might be  unacceptable hand gestures in culture or enterprise? Or do the old world icons like Save floppy disk icons still find acceptable? Well the survey results told you. Challenges must be tested, over time, and context of use is critical now, including external factors such as the internet and social media adoption. Indeed the fears about global rejection of the face and hand icons was not borne out, and some of the more anachronistic icons (checkbooks, microphones, real-to-real tape decks, 3.5" floppies for "save") have become accepted metaphors for current actions. More importantly the findings brought into focus the reason for OUAB - engage with and illicit feedback though working groups before we build anything. 6. EReaders and Oracle iBook: What is the uptake and trends of ereaders? And how about a demo of an iBook with enterprise apps content?  Well received by the audience, the session included a live running poll of ereader usage. 7. Gamification Design Jam: Fun, hands on event for teams of Oracle staff, partners and customers, actually building gamified flows, a practice that can be applied right away by customers and partners.  8. UX Direct: A new offering of usability best practices, coming to an external website for you in 2013. FInd a real user, observe their tasks, design and approve, build and measure. Simple stuff to improve apps implications no end. 9. FUSE (an internal term only, basically Fusion Simplified Experience): demo of the new Face of Fusion Applications: inherently mobile, simple to use, social, personalizable and FAST, three great demos from the HCM, CRM and ICT world on how these UX designs can be used in different ways. So, a powerful breadth and depth of UX solutions and opporunities for customers and partners to engage with and explore how they can make their users happy and benefit their business reaping continued ROI from those apps investments. Find out more about the OUAB and how to get involved here ... 

    Read the article

  • Eee PC Seashell series netbook screen is cut off at bottom no matter the resolution

    - by Yzmir Ramirez
    I have an Eee PC 1015PE Seashell netbook running Windows 7 Home Premium with an Intel Graphics Media Accelerator 3150 (8.14.10.2230) with a "Generic Non-PnP Monitor" detected. I tried: Changing the resolution (Control Panel = Appearance and Personalization = Display = Screen Resolution) to 1024x768 Updating the video driver (to 8.14.10.2230) Uninstalling the driver and rebooting Pressing the Windows Key + "-" (magnifier) Pressing Ctrl + Mouse Scroll only resizes the desktop items Pressing Fn + F4 shows 1024x600 (which I think is what I should be using, but nothing happens) EDIT: Changed from Landscape to Portrait and it works Attached an External Monitor and when I extend or set as desktop it works only on the External Monitor (shows up as "Generic PnP Monitor in Device Manager) Basically the bottom inch of my desktop is off-screen hiding my start bar, but my wigets are in their proper position (the start bar is not hidden). Pressing Ctrl + Esc shows the start menu but its cut-off. I'm pretty sure I should be using 1024x600 resolution, any advice? What's odd is that this only started happening recently. EDIT2: Here are some screenshots showing the problem: Resized Window to fit: Opened Start Menu - notice it cut off: Maximized window and then scrolled down - notice no Start Menu: I downgraded my graphic driver I downloaded from the Intel Download Center for the Graphic Media Accelerator 3150 (now: 8.14.10.1972) and now my "Generic non-PnP Montior" detects as "Digital Flat Panel (1024x768 60Hz)".

    Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >