Search Results

Search found 23350 results on 934 pages for 'general event'.

Page 68/934 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Tech Article: Tired of Null Pointer Exceptions? Use Java SE 8's Optional!

  - by Tori Wieldt

  A wise man once said you are not a real Java programmer until you've dealt with a null pointer exception. The null reference is the source of many problems because it is often used to denote the absence of a value. Java SE 8 introduces a new class called java.util.Optional that can alleviate some of these problems. In the tech article "Tired of Null Pointer Exceptions? Use Java SE 8's Optional!" Java expert Raoul-Gabriel Urma shows you how to make your code more readable and protect it against null pointer exceptions. Urma explains "The purpose of Optional is not to replace every single null reference in your codebase but rather to help design better APIs in which—just by reading the signature of a method—users can tell whether to expect an optional value. In addition, Optional forces you to actively unwrap an Optional to deal with the absence of a value; as a result, you protect your code against unintended null pointer exceptions." Learn how to go from writing painful nested null checks to writing declarative code that is composable, readable, and better protected from null pointer exceptions. Read "Tired of Null Pointer Exceptions? Use Java SE 8's Optional!"

  Read the article

• Shrinking a Linux OEL 6 virtual Box image (vdi) hosted on Windows 7

  - by AndyBaker

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Recently for a customer demonstration there was a requirement to build a virtual box image with Oracle Enterprise Manager Cloud Control 12c. This meant installing OEL Linux 6 as well as creating an 11gr2 database and Oracle Enterprise Manager Cloud Control 12c on a single virtual box. Storage was sized at 300Gb using dynamically allocated storage for the virtual box and about 10Gb was used for Linux and the initial build. After copying over all the binaries and performing all the installations the virtual box became in the region of 80Gb used size on the host operating system, however internally it only really needed around 20Gb. This meant 60Gb had been used when copying over all the binaries and although now free was not returned to the host operating system due to the growth of the virtual box storage '.vdi' file.  Once the ‘vdi’ storage had grown it is not shrunk automatically afterwards. Space is always tight on the laptop so it was desirable to shrink the virtual box back to a minimal size and here is the process that was followed. Install 'zerofree' Linux package into the OEL6 virtual box The RPM was downloaded and installed from a site similar to below; http://rpm.pbone.net/index.php3/stat/4/idpl/12548724/com/zerofree-1.0.1-5.el5.i386.rpm.html A simple internet search for ’zerofree Linux rpm’ was easy to perform and find the required rpm. Execute 'zerofree' package on the desired Linux file system To execute this package the desired file system needs to be mounted read only. The following steps outline this process. As root: # umount /u01 As root:# mount –o ro –t ext4 /u01 NOTE: The –o is options and the –t is the file system type found in the /etc/fstab. Next run zerofree against the required storage, this is located by a simple ‘df –h’ command to see the device associated with the mount. As root:# zerofree –v /dev/sda11   NOTE: This takes a while to run but the ‘-v’ option gives feedback on the process. What does Zerofree do? Zerofree’s purpose is to go through the file system and zero out any unused sectors on the volume so that the later stages can shrink the virtual box storage obtaining the free space back. When zerofree has completed the virtual box can be shutdown as the last stage is performed on the physical host where the virtual box vdi files are located. Compact the virtual box ‘.vdi’ files The final stage is to get virtual box to shrink back the storage that has been correctly flagged as free space after executing zerofree. On the physical host in this case a windows 7 laptop a DOS window was opened. At the prompt the first step is to put the virtual box binaries onto the PATH. C:\ >echo %PATH%   The above shows the current value of the PATH environment variable. C:\ >set PATH=%PATH%;c:\program files\Oracle\Virtual Box;   The above adds onto the existing path the virtual box binary location. C:\>cd c:\Users\xxxx\OEL6.1   The above changes directory to where the VDI files are located for the required virtual box machine. C:\Users\xxxxx\OEL6.1>VBoxManage.exe modifyhd zzzzzz.vdi compact  NOTE: The zzzzzz.vdi is the name of the required vdi file to shrink. Finally the above command is executed to perform the compact operation on the ‘.vdi’ file(s). This also takes a long time to complete but shrinks the VDI file back to a minimum size. In the case of the demonstration virtual box OEM12c this reduced the virtual box to 20Gb from 80Gb which was a great outcome to achieve.

  Read the article

• Mobile My Oracle Support 6.3 Release is live!

  - by JanSyss

  We have released Mobile My Oracle Support 6.3 last Saturday (13-Oct-2012), including 10 enhancements and almost 40 bug fixes. Mobile My Oracle Support is My Oracle Support's webapplication optimized for mobile devices to manage your Service Requests, your On Demand Requests for Change (RFCs), search over Support's Knowledge Base, Bug database or Sun System Handbook, and to manage your pending user requests (CUA). You can find the application at http://support.oracle.mobi  or get redirected from http://support.oracle.com when using a mobile device. Overall Several UI optimizations in different screens. Service Request Area Show the platinum icon for Platinum SRs and the restore status for Platinum Sev 1s. Email send with Share functionality now contains links to Mobile MOS and Full Site. Knowledge Management Area Ability in Advanced Search to search the Sun System Handbook (cfr. screenshot below) Better rendering of the KB documents to avoid where possible horizontal scrolling. Don't hesitate to share your feedback and comments or even requests.

  Read the article

• Collaborative Whiteboard using WebSocket in GlassFish 4 - Text/JSON and Binary/ArrayBuffer Data Transfer (TOTD #189)

  - by arungupta

  This blog has published a few blogs on using JSR 356 Reference Implementation (Tyrus) as its integrated in GlassFish 4 promoted builds. TOTD #183: Getting Started with WebSocket in GlassFish TOTD #184: Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark TOTD #185: Processing Text and Binary (Blob, ArrayBuffer, ArrayBufferView) Payload in WebSocket TOTD #186: Custom Text and Binary Payloads using WebSocket One of the typical usecase for WebSocket is online collaborative games. This Tip Of The Day (TOTD) explains a sample that can be used to build such games easily. The application is a collaborative whiteboard where different shapes can be drawn in multiple colors. The shapes drawn on one browser are automatically drawn on all other peer browsers that are connected to the same endpoint. The shape, color, and coordinates of the image are transfered using a JSON structure. A browser may opt-out of sharing the figures. Alternatively any browser can send a snapshot of their existing whiteboard to all other browsers. Take a look at this video to understand how the application work and the underlying code. The complete sample code can be downloaded here. The code behind the application is also explained below. The web page (index.jsp) has a HTML5 Canvas as shown: <canvas id="myCanvas" width="150" height="150" style="border:1px solid #000000;"></canvas> And some radio buttons to choose the color and shape. By default, the shape, color, and coordinates of any figure drawn on the canvas are put in a JSON structure and sent as a message to the WebSocket endpoint. The JSON structure looks like: { "shape": "square", "color": "#FF0000", "coords": { "x": 31.59999942779541, "y": 49.91999053955078 }} The endpoint definition looks like: @WebSocketEndpoint(value = "websocket",encoders = {FigureDecoderEncoder.class},decoders = {FigureDecoderEncoder.class})public class Whiteboard { As you can see, the endpoint has decoder and encoder registered that decodes JSON to a Figure (a POJO class) and vice versa respectively. The decode method looks like: public Figure decode(String string) throws DecodeException { try { JSONObject jsonObject = new JSONObject(string); return new Figure(jsonObject); } catch (JSONException ex) { throw new DecodeException("Error parsing JSON", ex.getMessage(), ex.fillInStackTrace()); }} And the encode method looks like: public String encode(Figure figure) throws EncodeException { return figure.getJson().toString();} FigureDecoderEncoder implements both decoder and encoder functionality but thats purely for convenience. But the recommended design pattern is to keep them in separate classes. In certain cases, you may even need only one of them. On the client-side, the Canvas is initialized as: var canvas = document.getElementById("myCanvas");var context = canvas.getContext("2d");canvas.addEventListener("click", defineImage, false); The defineImage method constructs the JSON structure as shown above and sends it to the endpoint using websocket.send(). An instant snapshot of the canvas is sent using binary transfer with WebSocket. The WebSocket is initialized as: var wsUri = "ws://localhost:8080/whiteboard/websocket";var websocket = new WebSocket(wsUri);websocket.binaryType = "arraybuffer"; The important part is to set the binaryType property of WebSocket to arraybuffer. This ensures that any binary transfers using WebSocket are done using ArrayBuffer as the default type seem to be blob. The actual binary data transfer is done using the following: var image = context.getImageData(0, 0, canvas.width, canvas.height);var buffer = new ArrayBuffer(image.data.length);var bytes = new Uint8Array(buffer);for (var i=0; i<bytes.length; i++) { bytes[i] = image.data[i];}websocket.send(bytes); This comprehensive sample shows the following features of JSR 356 API: Annotation-driven endpoints Send/receive text and binary payload in WebSocket Encoders/decoders for custom text payload In addition, it also shows how images can be captured and drawn using HTML5 Canvas in a JSP. How could this be turned in to an online game ? Imagine drawing a Tic-tac-toe board on the canvas with two players playing and others watching. Then you can build access rights and controls within the application itself. Instead of sending a snapshot of the canvas on demand, a new peer joining the game could be automatically transferred the current state as well. Do you want to build this game ? I built a similar game a few years ago. Do somebody want to rewrite the game using WebSocket APIs ? :-) Many thanks to Jitu and Akshay for helping through the WebSocket internals! Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

  Read the article

• New Horizon

  - by alexismp

  I have resigned from Oracle and thus will soon leave the GlassFish group. I feel very proud looking back at what we've achieved as a team with GlassFish in the past few years, including those past two years at Oracle. If you know anything about the history of application servers at Sun, you'll recognize that building such a community around GlassFish and its amazing number of downloads is nothing short of a small miracle. The Java EE platform has also seen a strong resurgence, bringing it back to the forefront of effective enterprise Java development in many ways. Having been hired by Sun some 13 years ago to sell NetDynamics I certainly feel that I leave the company's application server in *much* better shape. Oracle has ambitious plans for GlassFish and has been in my opinion a good steward for this community. I see no reason for this to change and I do expect the community to keep on pushing Oracle to get even better with time. This ride has been intense and the people I've met and worked with, both inside and outside Sun/Oracle, have made the experience the best one of my career. My journey now continues here: alexismp.wordpress.com. See you there!

  Read the article

• Latest Exadata Quarterly Full Stack Patch

  - by Bethany Lapaglia

  The latest Quarterly Full Stack patch was released on October 17th for Exadata.  This patch contains all of the latest recommended patches for the Exadata Database Machine.  For more details, refer to My Oracle Support Note titled Database Machine and Exadata Storage Server 11g Release 2 (11.2) Supported Versions [888828.1].  Note that the information in the note applies only to Exadata Storage Server Software 11.2.  This note is maintained on a regular basis so bookmark it and use it as reference for the latest Exadata Database Machine patching recommendations.

  Read the article

• Virtual Developer Day - EMEA-friendly time

  - by Tori Wieldt

  OTN's Virtual Developer Day lets you learn about the latest technical improvements in Java without leaving your desk/couch/park bench. Watch informative tutorials on your laptop and improve your Java programming expertise and engage in live chat sessions with Java experts, all for FREE.  OTN Virtual Developer Day: Java Europe/Africa/Middle East - June 25 09:00 to 13:00 BST / 10:00 to 14:00 CEST / 13:30 to 17:30 IST / 12:00 to 16:00 MSK / 08:00 to 12:00 Corresponding UTC (GMT) After a short keynote, you can dive into one of these three tracks:  Java SE 8 Track Learn about the features scheduled for Java SE 8, including Lambda expressions, extension methods for interfaces and a new Date and Time API. Learn how to create basic apps with JavaFX.  Java EE Track Take a close look at the new functionality in Java EE 7. Get presentations and demos on JSON, WebSockets, Batch, Concurrency, JAX-RS 2, JMS 2,  Java Embedded Track Provides an introductions to the Raspberry Pi, the Keil board, ARM architecture, and how to make it all work with Java Embedded. You know Java, now really know Java. Register now!

  Read the article

• Processing Text and Binary (Blob, ArrayBuffer, ArrayBufferView) Payload in WebSocket - (TOTD #185)

  - by arungupta

  The WebSocket API defines different send(xxx) methods that can be used to send text and binary data. This Tip Of The Day (TOTD) will show how to send and receive text and binary data using WebSocket. TOTD #183 explains how to get started with a WebSocket endpoint using GlassFish 4. A simple endpoint from that blog looks like: @WebSocketEndpoint("/endpoint") public class MyEndpoint { public void receiveTextMessage(String message) { . . . } } A message with the first parameter of the type String is invoked when a text payload is received. The payload of the incoming WebSocket frame is mapped to this first parameter. An optional second parameter, Session, can be specified to map to the "other end" of this conversation. For example: public void receiveTextMessage(String message, Session session) {     . . . } The return type is void and that means no response is returned to the client that invoked this endpoint. A response may be returned to the client in two different ways. First, set the return type to the expected type, such as: public String receiveTextMessage(String message) { String response = . . . . . . return response; } In this case a text payload is returned back to the invoking endpoint. The second way to send a response back is to use the mapped session to send response using one of the sendXXX methods in Session, when and if needed. public void receiveTextMessage(String message, Session session) {     . . .     RemoteEndpoint remote = session.getRemote();     remote.sendString(...);     . . .     remote.sendString(...);    . . .    remote.sendString(...); } This shows how duplex and asynchronous communication between the two endpoints can be achieved. This can be used to define different message exchange patterns between the client and server. The WebSocket client can send the message as: websocket.send(myTextField.value); where myTextField is a text field in the web page. Binary payload in the incoming WebSocket frame can be received if ByteBuffer is used as the first parameter of the method signature. The endpoint method signature in that case would look like: public void receiveBinaryMessage(ByteBuffer message) {     . . . } From the client side, the binary data can be sent using Blob, ArrayBuffer, and ArrayBufferView. Blob is a just raw data and the actual interpretation is left to the application. ArrayBuffer and ArrayBufferView are defined in the TypedArray specification and are designed to send binary data using WebSocket. In short, ArrayBuffer is a fixed-length binary buffer with no format and no mechanism for accessing its contents. These buffers are manipulated using one of the views defined by one of the subclasses of ArrayBufferView listed below: Int8Array (signed 8-bit integer or char) Uint8Array (unsigned 8-bit integer or unsigned char) Int16Array (signed 16-bit integer or short) Uint16Array (unsigned 16-bit integer or unsigned short) Int32Array (signed 32-bit integer or int) Uint32Array (unsigned 16-bit integer or unsigned int) Float32Array (signed 32-bit float or float) Float64Array (signed 64-bit float or double) WebSocket can send binary data using ArrayBuffer with a view defined by a subclass of ArrayBufferView or a subclass of ArrayBufferView itself. The WebSocket client can send the message using Blob as: blob = new Blob([myField2.value]);websocket.send(blob); where myField2 is a text field in the web page. The WebSocket client can send the message using ArrayBuffer as: var buffer = new ArrayBuffer(10);var bytes = new Uint8Array(buffer);for (var i=0; i<bytes.length; i++) { bytes[i] = i;}websocket.send(buffer); A concrete implementation of receiving the binary message may look like: @WebSocketMessagepublic void echoBinary(ByteBuffer data, Session session) throws IOException {    System.out.println("echoBinary: " + data);    for (byte b : data.array()) {        System.out.print(b);    }    session.getRemote().sendBytes(data);} This method is just printing the binary data for verification but you may actually be storing it in a database or converting to an image or something more meaningful. Be aware of TYRUS-51 if you are trying to send binary data from server to client using method return type. Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) TOTD #183 - Getting Started with WebSocket in GlassFish TOTD #184 - Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark Subsequent blogs will discuss the following topics (not necessary in that order) ... Error handling Custom payloads using encoder/decoder Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

  Read the article

• JVM Language Summit in July

  - by Tori Wieldt

  A reminder that the 2012 JVM Language Summit is happening July 30–August 1, 2012 in Santa Clara, CA. The JVM Language Summit is an open technical collaboration among language designers, compiler writers, tool builders, runtime engineers, and VM architects, sharing their experiences as creators of programming languages for the JVM, and of the JVM itself. Non-JVM developers are welcome to attend or speak on their runtime, VM, or language of choice. About 70 language and VM implementers attended last year—and over one third presented. What’s at the JVM Language Summit? Three days of technical presentations and conversations about programming languages and the JVM. Prepared talks by numerous visiting language experts, OpenJDK engineers, and other Java luminaries. Many opportunities to visit and network with your peers. Da Vinci Machine Project memorabilia. Dinner at a local restaurant, such as last year’s Faultline Brewing Company. A chance to help shape the future of programming languages on the JVM. Space is limited: This summit is organized around a single classroom-style room, to support direct communication between participants. To cover costs, there is a nominal conference fee of $100. Learn more.

  Read the article

• Java SE Updates

  - by Tori Wieldt

  Duke's helpers from around the world have been busy making Java just right for all good developers. Here are the updates:  Java SE 7 Update 10This releases provides key security features and bug fixes. Oracle strongly recommends that all Java SE 7 users upgrade to this release. JavaFX 2.2.4 is now bundled with the JDK on Windows, Mac and Linux x86/x64.Learn more Download Java SE 6 Update 38  This release provides security features and bug fixes. Oracle strongly recommends that all Java SE 6 users upgrade to this release (or to Java SE 7 update 10). Learn more Download Java SE Embedded 7 Update 10 This releases provides the security features and bug fixes from Java SE 7 Update 10. Learn more Download Java SE Embedded 6 Update 38  This releases provides the security features and bug fixes from Java SE 6 Update 38. Learn more Download NOTE: The end of public updates for Java SE 6 will occur in February 2013. See "The End of Public Updates for Java SE 6" and the Java SE Support Roadmap for more information.

  Read the article

• Java @Contented annotation to help reduce false sharing

  - by Dave

  See this posting by Aleksey Shipilev for details -- @Contended is something we've wanted for a long time. The JVM provides automatic layout and placement of fields. Usually it'll (a) sort fields by descending size to improve footprint, and (b) pack reference fields so the garbage collector can process a contiguous run of reference fields when tracing. @Contended gives the program a way to provide more explicit guidance with respect to concurrency and false sharing. Using this facility we can sequester hot frequently written shared fields away from other mostly read-only or cold fields. The simple rule is that read-sharing is cheap, and write-sharing is very expensive. We can also pack fields together that tend to be written together by the same thread at about the same time. More generally, we're trying to influence relative field placement to minimize coherency misses. Fields that are accessed closely together in time should be placed proximally in space to promote cache locality. That is, temporal locality should condition spatial locality. Fields accessed together in time should be nearby in space. That having been said, we have to be careful to avoid false sharing and excessive invalidation from coherence traffic. As such, we try to cluster or otherwise sequester fields that tend to written at approximately the same time by the same thread onto the same cache line. Note that there's a tension at play: if we try too hard to minimize single-threaded capacity misses then we can end up with excessive coherency misses running in a parallel environment. Theres no single optimal layout for both single-thread and multithreaded environments. And the ideal layout problem itself is NP-hard. Ideally, a JVM would employ hardware monitoring facilities to detect sharing behavior and change the layout on the fly. That's a bit difficult as we don't yet have the right plumbing to provide efficient and expedient information to the JVM. Hint: we need to disintermediate the OS and hypervisor. Another challenge is that raw field offsets are used in the unsafe facility, so we'd need to address that issue, possibly with an extra level of indirection. Finally, I'd like to be able to pack final fields together as well, as those are known to be read-only.

  Read the article

• Installing Visual Studio 2010 SP1 or Windows Phone tools in your VM (danger!)

  - by Jeff

  If you've read my blog for any amount of time, you probably know that I tend to develop stuff in a Parallels VM on a Mac. It's how I roll. I like VM's because I can trash them and do really stupid things with beta software. That said, there is a pain point that doesn't seem that well documented when it comes to installing stuff in this scenario.The WP7 tools, and SP1 for Visual Studio 2010 (perhaps only if you already have the WP7 tools installed, I'm not sure), do something strange on install. As if it weren't already a long and slow installation, for reasons I don't understand, the installer fires up an instance of Windows Phone Emulator. As you may already know, the emulator doesn't run in a VM, because it is itself a VM, apparently. What it will do is fire up your CPU, make your comprooder hot and make the fans blow harder.I found this out accidentally, as I started the (slow) phone tool installation once, and walked away. An hour and a half later, I came back to find it hadn't finished. But it was hot and the CPU was pegged, so I fired up the task manager to find XDE.exe, the phone emulator, cranking away. I had to kill it several times, and eventually the install finished. It fired up just once in the SP1 install, but it still had the same hanging effect.I can't for the life of me figure out why it does this. In a VM, I can connect the phone to it and use that, so I don't need the emulator. But this install, firing up the emulator, will make it choke until you kill the XDE.exe process. Watch out!

  Read the article

• MSDN Article for the GetClusterCharacteristics Stored Procedure

  Here is an article I wrote for MSDN that introduces us to the GetClusterCharacteristics stored procedure in SQL Server Data Mining.  It gives us an insight into how the sequences within clusters are derived when using the Sequence Clustering algorithm. Link to article

  Read the article

• Need a Quick Sure Method to Produce a Formatted Explain Plan? This will help!

  - by user702295

  Please use the following on the production machine to get formatted explain plan and sql trace using the SLOW sql (e.g. 'T_COMB_LIST.COMB_ID = 216') or any other value that takes longer: -- Open new session is SQL*Plus */ -- Make sure you are using updated PLAN_TABLE -- This can be done by dropping it and recreate it by running: -- SQL> @?/rdbms/admin/utlxplan.sql) set lines 1000 set pages 1000 spool xplan_1.txt EXPLAIN PLAN FOR <<<<Replace this line with exactly the same query you used above. Force hard parse by modifying the case of a character>>>> @?/rdbms/admin/utlxplp spool off EXIT --Open a second session is SQL*Plus ALTER SESSION SET max_dump_file_size = unlimited; ALTER SESSION SET tracefile_identifier = '10046'; ALTER SESSION SET statistics_level = ALL; ALTER SESSION SET events '10046 trace name context forever, level 12'; <<<<Replace this line with exactly the same query you used above. Force hard parse by modifying the case of a character>>>> select 'verify cursor closed' from dual; ALTER SYSTEM SET EVENTS '10046 trace name context off'; EXIT Make sure spooled file is formatted properly and that the 10046 trace has relevant explain plan in it.  Please Upload both files (10046 trace is generated in udump). Need instructions to find udump?   sqlplus "/ as sysdba" show parameters dump_dest This will show you bdump, cdump and udump locations.

  Read the article

• The latest version of the EJB 3.2 spec available on java.net project

  - by Marina Vatkina

  If you are not following us on the users alias, here is a quick update. Just before JavaOne, I uploaded the latest version of the EJB 3.2 Core document to the ejb-spec.java.net downloads. If you want to see the detailed changes, download it If you are interested in the high-level list, or would like to know what to look for, this is the list of changes since the previous version (found on the same download page): Specified that the SessionContext object in a the singleton session bean is thread-safe Clarified that the EJB timers distribution and failover rules apply only to persistent timers Clarified that non-persistent timers returned by getTimers and getAllTimers methods are from the same JVM as the caller Fixed section numbering (left over after moving it to its own chapter) in Ch 17 Noted that only 3.0 and 3.1 deployment descriptors are required to be supported in EJB 3.2 Lite for prior versions of the applications Fixes for EJB_SPEC-61 (Ambiguity in EJB lite local view support) and EJB_SPEC-59 (Improve references to the component-defining annotations) JMS/MDB changes: added new standard activation properties and the unique identifier, and rearranged sections for easier navigation Fixed unresolved cross-refs Updated the rule: only local asynchronous session bean invocations are supported in EJB 3.2 Lite Synchronized permissions in the Table with the permissions listed for the EJB Components in the Java EE Platform Specification Table EE.6-2 Specified that during processing of the close() method, the embeddable container cancels all pending asynchronous invocations and non-persistent timers Updated most of the referenced documents to their latest versions Happy reading!

  Read the article

• So Much Happening at Devoxx

  - by Tori Wieldt

  Devoxx, the premier Java conference in Europe, has been sold out for a while. The organizers (thanks Stephan and crew!) cap the attendance to make sure all attendees have a great experience, and that speaks volumes about their priorities. The speakers, hackathons, labs, and networking are all first class. The Oracle Technology Network will be there, and if you were smart/lucky enough to get a ticket, come find us and join the fun: IoT Hack Fest Build fun and creative Internet of Things (IoT) applications with Java Embedded, Raspberry Pi and Leap Motion on the University Days (Monday and Tuesday). Learn from top experts Yara & Vinicius Senger and Geert Bevin at two Raspberry Pi & Leap Motion hands-on labs and hacking sessions. Bring your computer. Training and equipment will be provided. Devoxx will also host an Internet of Things shop in the exhibition floor where attendees can purchase Arduino, Raspberry PI and Robot starter kits. Bring your IoT wish list! Video Interviews Yolande Poirier and I will be interviewing members of the Java Community in the back of the Expo hall on Wednesday and Thursday. Videos are posted on Parleys and YouTube/Java. We have a few slots left, so contact me (you can DM @Java) if you want to share your insights or cool new tip or trick with the rest of the developer community. (No commercials, no fluff. Keep it techie and keep it real.)  Oracle Keynote Wednesday morning Mark Reinhold, Chief Java Platform Architect, and Brian Goetz, Java Language Architect will provide an update on Java 8 and beyond. Oracle Booth Drop by the Oracle booth to see old and new friends.  We'll have Java in Action demos and the experts to explain them and answer your questions. We are raffling off Raspberry Pi's each day, so be sure to get your badged scanned. We'll have beer in the booth each evening. Look for @Java in her lab coat.  See you at Devoxx! 

  Read the article

• Futures/Monads vs Events

  - by c69

  So, the question is quite simple: in an application framework, when performance impact can be ignored (10-20 events per second at max), what is more maintainable and flexible to use as a preferred medium for communication between modules - Events or Futures/Promices/Monads ? Its often being said, that Events (pub/sub, mediator) allow loose-coupling and thus - more maintainable app... My experience deny this: once you have more that 20+ events - debugging becomes hard, and so is refactoring - because it is very hard to see: who, when and why uses what. Promices (i'm coding in javascript) are much uglier and dumber, than Events. But: you can clearly see connections between function calls, so application logic becomes more straight-forward. What i'm afraid. though, is that Promices will bring more hard-coupling with them... p.s: the answer does not have to be based on JS, experience from other functional languages is much welcome.

  Read the article

• The Emergence of a New Architecture for Long-term Data Retention

  - by Claudia Caramelli-Oracle

  Dear Partner, A new research report from Wikibon explains how the combination of flash and tape makes for a superior solution for long-term data archives versus using dedupe appliances. The combination of these two technologies, that have been in the market, one for a few years and the other for decades, introduces a new concept. The concept is “Flape”, a concept first coined by Wikibon in October of 2012. Flape is a combination of Flash (SSD) technology and tape…this combination of technologies when used for long-term archiving can save IT departments as much as 300% of their overall IT budget over the course of 10 years. Do you want to know more? You can review the whole report here.

  Read the article

• Try the Oracle Database Appliance Manager Configurator - For Fun!

  - by pwstephe-Oracle

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 If you would like to get a first hand glimpse of how easy it is to configure an ODA, even if you don’t have access to one, it’s possible to download the Appliance Manager Configurator from the Oracle Technology Network, and run it standalone on your PC or Linux/Unix  workstation. The configurator is packaged in a zip file that contains the complete Java environment to run standalone. Once the package is downloaded and unzipped it’s simply a matter of launching it using the config command or shell depending on your runtime environment. Oracle Appliance Manager Configurator is a Java-based tool that enables you to input your deployment plan and validate your network settings before an actual deployment, or you can just preview and experiment with it. Simply download and run the configurator on a local client system which can be a Windows, Linux, or UNIX system. (For Windows launch the batch file config.bat for Linux/Unix environments, run  ./ config.sh). You will be presented with the very same dialogs and options used to configure a production ODA but on your workstation. At the end of a configurator session, you may save your deployment plan in a configuration file. If you were actually ready to deploy, you could copy this configuration file to a real ODA where the online Oracle Appliance Manager Configurator would use the contents to deploy your plan in production. You may also print the file’s content and use the printout as a checklist for setting up your production external network configuration. Be sure to use the actual production network addresses you intend to use it as this will only work correctly if your client system is connected to same network that will be used for the ODA. (This step is not necessary if you are just previewing the Configurator). This is a great way to get an introductory look at the simple and intuitive Database Appliance configuration interface and the steps to configure a system. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• With Google Analytics, is it possible to check a specific page in Multi-Channel conversion attribution?

  - by Emmett R.

  I'm somewhat new to Google Analytics, and I'm trying to track all conversions that are assisted by a particular landing page, because I don't expect an instant purchase. I have e-commerce tracking set up. Due to the constraints of the associated ad campaign, I can't include the source/medium code in the url when people go to the landing page, and all of my traffic to the landing page is likely to be direct, so I'm not sure how to tell Multi-Channel marketing that it's a significant page. I know how to add events to a page, but I'm still figuring out what they can and cannot do. Would creating a redirect from the landing url to an identical url+source/medium code work? Any advice on how to accomplish this would be greatly appreciated. Tracking the final sale conversion is not the issue. Ecommerce reporting is functioning just fine on the site. I just want to report the landing page as an assist, whenever it shows up in the funnel, and I need to be able to do that across multiple visits.

  Read the article

• IoT: Wearables!

  - by Tori Wieldt

  Wearables are a subset of the Internet of Things that has gained a lot of attention. Wearables can monitor your infant's heartrate, open your front door, or warn you when someone's trying to hack your enterprise network. From Devoxx UK to Oracle OpenWorld to Devoxx4kids, everyone seems to be doing something with wearables.  In this video, John McLear introduces the NFC Ring. It can be used to unlock doors, mobile phones, transfer information and link people. The software for developers is open source, so get coding! If you are coming to JavaOne or Oracle OpenWorld, join us for Dress Code 2.0, a wearables meetup. Put on your best wearables gear and come hang out with the Oracle Applications User Experience team and friends at the OTN Lounge. We'll discuss the finer points of use cases, APIs, integrations, UX design, and fashion and style considerations for wearable tech development. There will be gifts for attendees sporting wearable tech, while supplies last. What: Dress Code 2.0: A Wearables Meetup When: Tuesday, 30-September-2014, 4-6 PM Where: OTN Lounge at Oracle OpenWorld IoT - Wearable Resources The IoT Community on Java.net Wearables in the World of Enterprise Applications? Yep. The Paradox of Wearable Technologies Conference: Wearable Sensors and Electronics (Santa Clara, USA) Devoxx4Kids Workshop for Youth: Wearable tech! (Mountain View, USA)

  Read the article

• Java EE 7 support in NetBeans 7.3.1

  - by arungupta

  NetBeans IDE provide tools, templates, and samples for building Java EE 7 applications. NetBeans 7.3.1 specifically added support for the features mentioned below: Support for creating Java EE 7 projects using Maven and Ant Develop, Deploy, and Debug using GlassFish 4 Bundled Java EE 7 javadocs CDI is enabled by default for new Java EE 7 projects (CDI 1.1) Create database scripts from Entity Classes (JPA 2.1) Java Persistence Query Language (JPQL) testing tool (JPA 2.1) RESTful Java client creation using JAX-RS 2.0 Client APIs (JAX-RS 2.0) New templates for JAX-RS 2 Filter and Interceptor (JAX-RS 2.0) New templates for WebSocket endpoints (WebSocket 1.0) JMS messages are sent using JMS 2 simplified API (JMS 2.0) Pass-through attributes are supported during Facelet page editing (JSF 2.2) Resource Library Contracts(JSF 2.2) @FlowScoped beans from editor and wizards (JSF 2.2) Support for EL 3.0 syntax in editor (EL 3.0) JSON APIs can be used with code completion (JSON 1.0) A comprehensive list of features added in this release is available in NetBeans 7.3.1 New and Noteworthy. Watch the screencast below to get a quick overview of the features and capabilities: Download Netbeans 7.3.1 and start playing with Java EE 7!

  Read the article

• What's new in Servlet 3.1 ? - Java EE 7 moving forward

  - by arungupta

  Servlet 3.0 was released as part of Java EE 6 and made huge changes focused at ease-of-use. The idea was to leverage the latest language features such as annotations and generics and modernize how Servlets can be written. The web.xml was made as optional as possible. Servet 3.1 (JSR 340), scheduled to be part of Java EE 7, is an incremental release focusing on couple of key features and some clarifications in the specification. The main features of Servlet 3.1 are explained below: Non-blocking I/O - Servlet 3.0 allowed asynchronous request processing but only traditional I/O was permitted. This can restrict scalability of your applications. Non-blocking I/O allow to build scalable applications. TOTD #188 provide more details about how non-blocking I/O can be done using Servlet 3.1. HTTP protocol upgrade mechanism - Section 14.42 in the HTTP 1.1 specification (RFC 2616) defines an upgrade mechanism that allows to transition from HTTP 1.1 to some other, incompatible protocol. The capabilities and nature of the application-layer communication after the protocol change is entirely dependent upon the new protocol chosen. After an upgrade is negotiated between the client and the server, the subsequent requests use the new chosen protocol for message exchanges. A typical example is how WebSocket protocol is upgraded from HTTP as described in Opening Handshake section of RFC 6455. The decision to upgrade is made in Servlet.service method. This is achieved by adding a new method: HttpServletRequest.upgrade and two new interfaces: javax.servlet.http.HttpUpgradeHandler and javax.servlet.http.WebConnection. TyrusHttpUpgradeHandler shows how WebSocket protocol upgrade is done in Tyrus (Reference Implementation for Java API for WebSocket). Security enhancements Applying run-as security roles to #init and #destroy methods Session fixation attack by adding HttpServletRequest.changeSessionId and a new interface HttpSessionIdListener. You can listen for any session id changes using these methods. Default security semantic for non-specified HTTP method in <security-constraint> Clarifying the semantics if a parameter is specified in the URI and payload Miscellaneous ServletResponse.reset clears any data that exists in the buffer as well as the status code, headers. In addition, Servlet 3.1 will also clears the state of calling getServletOutputStream or getWriter. ServletResponse.setCharacterEncoding: Sets the character encoding (MIME charset) of the response being sent to the client, for example, to UTF-8. Relative protocol URL can be specified in HttpServletResponse.sendRedirect. This will allow a URL to be specified without a scheme. That means instead of specifying "http://anotherhost.com/foo/bar.jsp" as a redirect address, "//anotherhost.com/foo/bar.jsp" can be specified. In this case the scheme of the corresponding request will be used. Clarification in HttpServletRequest.getPart and .getParts without multipart configuration. Clarification that ServletContainerInitializer is independent of metadata-complete and is instantiated per web application. A complete replay of What's New in Servlet 3.1: An Overview from JavaOne 2012 can be seen here (click on CON6793_mp4_6793_001 in Media). Each feature will be added to the JSR subject to EG approval. You can share your feedback to [email protected]. Here are some more references for you: Servlet 3.1 Public Review Candidate Downloads Servlet 3.1 PR Candidate Spec Servlet 3.1 PR Candidate Javadocs Servlet Specification Project JSR Expert Group Discussion Archive Java EE 7 Specification Status Several features have already been integrated in GlassFish 4 Promoted Builds. Have you tried any of them ? Here are some other Java EE 7 primers published so far: Concurrency Utilities for Java EE (JSR 236) Collaborative Whiteboard using WebSocket in GlassFish 4 (TOTD #189) Non-blocking I/O using Servlet 3.1 (TOTD #188) What's New in EJB 3.2 ? JPA 2.1 Schema Generation (TOTD #187) WebSocket Applications using Java (JSR 356) Jersey 2 in GlassFish 4 (TOTD #182) WebSocket and Java EE 7 (TOTD #181) Java API for JSON Processing (JSR 353) JMS 2.0 Early Draft (JSR 343) And of course, more on their way! Do you want to see any particular one first ?

  Read the article

• Freescale Technology Forum Japan 2012

  - by sasa

  2012?10?22?(?)·23?(?)??·?????????????????Freescale Technology Forum Japan 2012???????????????Java Embedded?????????????????????JavaOne San Francisco 2012???????????Java??????????????????????????????????????????????????? ?????????? 10/22(?) 11:00 Room7 ????Java?????????? 10/23(?) 11:30 Room8 ????????????????????????? ?????(????)?? ?????????????????????????M2M??????????Java VM????????????????Web????????Java FX????????GUI??????????????

  Read the article

• Two bugs you should be aware of

  - by AaronBertrand

  In the past 24 hours I have come across two bugs that can be quite problematic in certain environments. LPIM issue with SetFileIoOverlappedRange Last night the CSS team posted a blog entry detailing a potential issue with Lock Pages in Memory and Windows' SetFileIoOverlappedRange API. I tweeted about it at the time, but thought it could use a little more treatment. The potential symptoms can vary, but include the following (as quoted from the blog post): Wide ranging in SQL from invalid write location,...(read more)

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >