Search Results

Search found 12251 results on 491 pages for 'intel wireless card'.

Page 68/491 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• ralink rt2860 not working anymore in ubuntu 12.10

  - by greenit

  I just upgraded from Ubuntu 12.04 to 12.10, however, my network card is not working anymore... When i had 12.04 installed, i just had to download the driver from Ralink, go to the directory and enter these commands: $ make $ sudo make install and the network card worked... now, when I want to do this in ubuntu 12.10, it seems like it works, but it doesn't. I can enable the module, it recognizes the network card, but i am unable to connect to any wireless network... How can i get my wireless card working again? If any1 knows a solution, please tell it to me, thx in advance

  Read the article

• How can I dynamically load the correct sprite from a sprite sheet?

  - by Leonard Challis

  I am making a simple card game in unity. The game is based on a standard 52-card pack, with identical backs for unique faces. In my particular game different cards are worth different values and have various special abilities. The game will have 52 cards on the table (on the draw position or in the face-down deck or in someone's hand) at all times, so this number won't change. I thought that making a Card prefab and instantiating 52 of these manually would be a bad idea. Even doing it in code, I thought, would be a bit OTT, and that I should just instantiate visual cards when they are face-up to the player. I have a sprite sheet of the 52 cards and the back, which is imported as a Sprite in multiple mode, sliced in to a grid containing all the cards needed to play the game. The problem I now face is that, through my GameController script I want to generate a shuffled pack of cards, deal some to each player and then show those cards to a player. However, I am not sure of the best way, or even if it's possible, to do this dynamically with the sprite sheets as they are. For instance if I have the following: private CardRank rank; private CardSuite suite; private void Start() { this.rank = CardRank.Ace; this.suite = CardSuite.Spades; } This class would be instantiated by the game manager. I would have 52 of these in code. Whenever I have to visually show a card in the scene, I would use a card prefab, which is essentially a game object with a SpriteRenderer on it. I would need to dynamically load the correct sprite for this object from the spritesheet. The sliced sprites from the sprite sheet actually have names in the format AS (Ace of Spades), 7H (Seven of Hearts), etc - though this was a manual thing I did myself of course. I have also tried various alternative solutions, including creating animations, having separate sprites not in a spritesheet and having an array of available sprites in an array with a specific index for each card, but none seem as elegant as trying to load the correct sprite at runtime, as I'm trying to. So, how do I load a specific sprite from a spritesheet at runtime? I'm open to suggestions, even those that make me think differently about how to approach the problem.

  Read the article

• BCM 4306 not recognized after upgrade on a Dell Latitude D600

  - by Brian Eisemann

  This is extremely frustrating to me. I had the wireless card working before I upgraded to 11.10. At first the wireless device was recognized but it told me there was no firmware, so I went ahead and went through the process I did before of installing the b43/b43legacy firmware, and now my wireless device is not even recognized, or showing up anywhere! 02:03.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11a/b/g [14e4:4324] (rev 03)

  Read the article

• Investing in Servers by Intel

  - by Koushal Deshpande

  Originally posted on: http://geekswithblogs.net/BizTalkAndOtherTechs/archive/2013/10/31/investing-in-servers-by-intel.aspxA nice article reference from Intel, refer here. Referees to cloud as well. Choose correctly what you need. 1 Do determine right server for your company. There is no use getting a server that has redundant services but still add to the costs. 2 Do get servers that can be upgraded. A server with limited memory and storage may not be able to keep up with your business growth. The basic memory and storage options might not be sufficient. Consider at least 8GB of RAM and 1 terabyte of hard disk space. 3 Do check the server has at least one Gigabit Ethernet port. This allows high speed transferring of files and increases productivity for your employees. USB and Firewire ports may not be enough as their transfer speed is too low and will affect the productivity of your company. Infinite Technologies is ready to help perform this upgrade. Contact Infinite Technologies now View our other resellers » 4 Do verify that the server comes with documentation. Documentation allows you to make a claim when your server breaks down and is supported by a warranty. 6 Do check the support options for the server from the manufacturer. Different manufacturer has different support options such as maintenance plans and software upgrades. 5 Do always look into the warranty. Get an enhanced warranty that guarantees response and repair time to avoid disruption. 7 Do get server management tools that can be used on any computer. Server management tools should be cross compatible across different operating systems to take into account future PC replacements. 8 Do check the power usage of the servers. Get the right power supply to avoid damaging server hardware and consider the Intel® Xeon® E3 processor to help save on your electricity bills. 9 Do check what built-in security packages are available. Ensure that your server is protected. Built-in security1 helps you save on getting add on security packages.

  Read the article

• Intel obligé de rappeler ses puces Sandy Bridge, à cause d'un problème de port SATA

  Intel obligé de rappeler ses puces Sandy Bridge à cause d'un problème de port SATA, il pourrait lui en coûter 1 milliard de dollars Mise à jour du 01.02.2011 par Katleen Parfois, une petite erreur peut chambouler de grandes choses. C'est ce qui est en train d'arriver à Intel, avec ces processeurs Sandy Bridge. La compagnie se voit en effet contrainte de les rappeler, ce qui risque de perturber le travail des constructeurs de PCs. En effet, les puces de la gamme Series 6 (qui sont incorporées dans tous les systèmes Sandy Bridge) ont un problème avec leur port SATA (Cougar Point) : il risque de "se dégrader avec le temps", ce qui pourrait avoir un impact sur les performances ou la fo...

  Read the article

• Disable ATI Radeon graphics card and use intel graphics (switcheroo unavailable)

  - by user92356

  So I have a HP Envy with ATI Radeon 5450 + intel switchable graphics. I think (though I'm not sure) that the Radeon is running right now on Ubuntu 12.04 (because my laptop is making too much noise when I'm doing something non gpu intensive like word processing, or web browsing). So what I want to do is disable the ATI Radeon and use the Intel instead. I looked around and it seems all the solutions use switcheroo, but I dont have it on my computer! I think this happened because I tried installing the proprietary driver (fglrx). Any and all help is 200% appreciated, thank you

  Read the article

• 3+ monitors, nvidia + intel graphics

  - by gozzilli

  I have seen lots of different posts on this issue, but I cannot figure out what to do. I hope we can collect the available information in one place, so that they can be useful for others. Is it possible to have multiple (3+) monitors running on two different graphics cards? I have 1x nVidia GeForce GTX 550 with 2 DVI ports and 1x Intel integrated graphics, with 2 DVI ports. I understand that they would be running on different instances of X servers. Is that correct? Could someone point me in the right direction to start? On Windows it's so simple, there is no additional thing to do other than going in display preferences and activating all 3+ monitors. They can even be laid out alternating one monitor from one graphics card with another monitor from the other card.

  Read the article

• Laggy Graphics After Upgrade to Ubuntu 13.10

  - by John bracciano

  I noticed some issues concerning the graphics after I upgraded from Ubuntu 13.04 to 13.10. More specifically: Dash tends to be more "laggy" than it used to be. When I switch desktops you can clearly see the screen going frame by frame. Menu bar is also "laggy". When I open GIMP, the menu bar is useless after a while - it takes seconds to refresh. The problems seem to appear after some seconds of use. When I boot the system everything works fine, until some more graphics-intensive program starts (Firefox, GIMP, etc). /usr/lib/nux/unity_support_test -p reports: OpenGL vendor string: Intel Open Source Technology Center OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile OpenGL version string: 3.0 Mesa 9.2.1 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes I use an Asus Zenbook UX31A with: Intel® Core i5 Ivy Bridge Integrated Intel® HD Graphics 4000 Intel® HM76 Express Chipset Thank you in advance for any answer!

  Read the article

• Will Apple abandon OpenCL?

  - by John

  I am developing OpenCL applications, amongst others for MacOS. The new Macbook pro 13 inch comes with an Intel HD Graphics 3000 card so it seams reasonable to assume all their mainstream computers like Macbook and Mac mini will also come out with this Intel graphics card soon. OpenCL is not available for Intel graphics cards. Intel having a terrible reputation in developing graphics drivers and Apple knowing this makes me wonder Apple is abandoning OpenCL already again. Especially considering OpenCL should run anywhere, not only on high end systems. Developing applications only for the high end Macs with dedicated graphics hardware or for previous generation hardware with the Geforce 320M would not be a feasible option for me. Does anybody have any thoughts on this?

  Read the article

• Hostapd to connect laptop to Android

  - by Kmegamind

  i am trying to set up my laptop as an access point for my Android to use WiFi, so i knew that ubuntu sets the network as Ad-Hoc which is not discoverable by android, So i tried the method explained here -which i found on many other websites- but when i run hostapd.conf this error appears : nl80211: Failed to set interface wlan0 into AP mode nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0x8e488f8 user_data=0x8e48ea0 handler=0x807c5e0 ELOOP: remaining socket: sock=6 eloop_data=0x8e4aca8 user_data=(nil) handler=0x8086770 this is how my hostapd.conf looks like : interface=wlan0 driver=nl80211 ssid=Any_SSID_name hw_mode=g channel=1 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=Any_password wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP and this is my wireless card info : description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:73:51:f1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:f0300000-f0303fff

  Read the article

• Intel Atom D425 Problems

  - by Nico

  I have recently bought an Intel Atom D425 mini itx board with OCZ 30 Gig SSD and 1 Gig DDR3 ram. I have installed Ubuntu 10.04 and Crunchbang Statler ok; works fine in both. I tried to install Xubuntu 12.04, Ubuntu 12.04, and Mint 13 Mate. All of those 3 start up, but as soon as you get to install it all goes wrong and the monitor says input not supported. Is it an Intel Atom D425 problem, an Ubuntu problem, or something else? All help would be much appreciated Regards Nico

  Read the article

• How to Optimize Oracle Solaris Applications for Intel Platforms

  This technical white paper explains how developers can get the best performance out of applications running on Solaris on Intel Xeon processors.

  Read the article

• How to Optimize Oracle Solaris Applications for Intel Platforms

  This technical white paper explains how developers can get the best performance out of applications running on Solaris on Intel Xeon processors.

  Read the article

• Cannot enable Additional drivers for Broadcom in 12.10

  - by Compt

  tl;dr version: Additional Drivers does not work for enabling a driver in Ubuntu 12.10, however it worked in 12.04. I upgraded to Ubuntu 12.10 from 12.04 via a live USB. I did a fresh install to avoid any conflicts. From 12.04 I know that my wireless card has proprietary drivers that could be installed via Additional Drivers. I did eventually find additional drivers in the software sources menu, however when I attempt to switch to Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source, it not only does not work, it in fact disables my wireless completely. The only way to revert this is to restart, and revert back to "do not use the device". Then upon another restart, my wireless will function once again. I was curious if anyone else had this issue, and if there was a fix for it as of yet. I looked on launchpad and it may be a potential bug, but I am unsure. Any help would be greatly appreciated (and sorry for that wall of text). Until then, I'll continue to use my wireless as it is (or revert to 12.04), but I do notice a slower connection without it enabled.

  Read the article

• Need help with chronic slow wifi connections

  - by mgeorge

  I have had chronic slow wifi connections on several networks for a while now, I think since my update to 12.04 when it came out. I have tried many of the tips and tricks already available out there in the forums with no luck (wicd, etc..). I want to see if any of you experts out there might be able to help me, and thanks in advance!! I use ubuntu 12.04 on a lenovo ideapad y650, and most networks I connect to lose the connection frequently or do not give appropriate bandwidth when I am connected. Here are some results of the usual go-to system checks: cat /etc/lsb-release; uname -a: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" Linux mgeorge-lenovo 3.2.0-48-generic-pae #74-Ubuntu SMP Thu Jun 6 20:05:01 UTC 2013 i686 i686 i386 GNU/Linux lspci -nnk | grep -iA2 net: 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlwifi -- 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) Subsystem: Lenovo Device [17aa:3878] Kernel driver in use: tg3 lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 090c:7371 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) iwconfig: lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"Dyno" Mode:Managed Frequency:2.412 GHz Access Point: CC:5D:4E:46:0A:93 Bit Rate=150 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-40 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:948 Invalid misc:728 Missed beacon:0 eth0 no wireless extensions. rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod: Module Size Used by uvcvideo 67203 0 videodev 86588 1 uvcvideo nouveau 712674 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197641 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau mxm_wmi 12893 1 nouveau wmi 18744 1 mxm_wmi joydev 17393 0 arc4 12473 2 snd_hda_codec_realtek 174313 1 snd_hda_codec_hdmi 31775 1 snd_hda_intel 32719 3 snd_hda_codec 109562 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80916 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi psmouse 86520 0 snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event serio_raw 13027 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq iwlwifi 366509 0 mac80211 436493 1 iwlwifi snd 62218 16 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,sn d_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 17890 0 sparse_keymap 13658 1 ideapad_laptop cfg80211 178877 2 iwlwifi,mac80211 ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm ir_mce_kbd_decoder 12681 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 ir_rc6_decoder 12459 0 ir_rc5_decoder 12459 0 rc_rc6_mce 12454 0 ir_nec_decoder 12459 0 video 19115 1 nouveau ene_ir 18019 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ene_ir bnep 17830 2 rfcomm 38139 0 parport_pc 32114 0 bluetooth 158479 10 bnep,rfcomm ppdev 12849 0 binfmt_misc 17292 1 mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141414 0 nm-tool: NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: tg3 State: unavailable Default: no HW Address: 00:23:5A:CC:85:BD Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 [Dyno] -------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: yes HW Address: 00:22:FA:D0:94:CA Capabilities: Speed: 150 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) *Dyno: Infra, CC:5D:4E:46:0A:93, Freq 2412 MHz, Rate 54 Mb/s, Strength 81 WPA2 IPv4 Settings: Address: 10.0.0.43 Prefix: 24 (255.255.255.0) Gateway: 10.0.0.1 DNS: 10.0.0.1

  Read the article

• Dual monitor setup with Intel graphics and Nvidia Geforce GT 425M on 12.04

  - by fo_x86

  I have a Dell XPS L401x and just installed 12.04. I have a mini-display and an HDMI output, and I could hook up two Dell UltraSharp monitors to each port on Windows 7, and get a triple monitor setup. Doing a bit of research, it seems like the mini-display is wired to the integrated graphics card whereas HDMI is hooked up to Nvidia graphics card. I've also installed Bumblebee as it seemed like that was the proper way of installing Nvidia drivers on Ubuntu. At the moment none of my monitors is being recognized by Ubuntu. Is it even possible to have a triple monitor (laptop display + 2 external) setup? Has anyone successfully done this?

  Read the article

• Will Apple abandon OpenCL?

  - by John

  I am developing OpenCL applications, amongst others for MacOS. The new Macbook pro 13 inch comes with an Intel HD Graphics 3000 card so it seams reasonable to assume all their mainstream computers like Macbook and Mac mini will also come out with this Intel graphics card soon. OpenCL is not available for Intel graphics cards. Intel having a terrible reputation in developing graphics drivers and Apple knowing this makes me wonder Apple is abandoning OpenCL already again. Especially considering OpenCL should run anywhere, not only on high end systems. Developing applications only for the high end Macs with dedicated graphics hardware or for previous generation hardware with the Geforce 320M would not be a feasible option for me. Does anybody have any thoughts on this?

  Read the article

• Trouble with 12.10 lag

  - by Brennan

  Well basicly lately I have been having lag problems with 12.10. I will post my specs, but before the update to 12.10, it said that I had intel graphics. Now it says I have Gallium. My specs: *Memory: 3.9 GiB *Processor: Pentium(R) Dual-Core CPU E5500 @ 2.80GHz × 2 *Graphics: Gallium 0.4 on llvmpipe (LLVM 3.2, 128 bits) (used to say intel graphics) *OS Type: 32-bit *Disk: 486.1 GB The output of the command sudo apt-cache check is this: E: Invalid operation check The output of the command sudo lspci -nnk | grep -A5 VGA is this: 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e32] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:836d] Kernel driver in use: i915 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: ASUSTeK Computer Inc. Device [1043:8445] Kernel driver in use: snd_hda_intel

  Read the article

• sony vaio WLAN problem using 12.04

  - by Fredrik

  I'm unable to get my WLAN to work for my Sony Vaio model VPCF23C5E No problem connecting from windows, smartphones etc. $ sudo lshw -C network; lsb_release -a; uname -a; sudo rfkill list; dmesg | grep -i firm *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 64:27:37:92:99:0f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-29-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:f7000000-f707ffff memory:f7080000-f708ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: f0:bf:97:dd:b2:bd size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-1.fw ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:50 ioport:9000(size=256) memory:e2104000-e2104fff memory:e2100000-e2103fff LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise Linux siriedit 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no [ 1.287449] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 18.273582] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS Seen some proposed solution e.g. Wireless network cannot be enabled for Sony VAIO E series but answers there don't solve my problem... I'm out of ideas :-( What else can I check? update $ ifconfig -a eth0 Link encap:Ethernet HWaddr f0:bf:97:dd:b2:bd inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f2bf:97ff:fedd:b2bd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5072 errors:0 dropped:0 overruns:0 frame:0 TX packets:4444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4568435 (4.5 MB) TX bytes:610624 (610.6 KB) Interrupt:50 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1498 errors:0 dropped:0 overruns:0 frame:0 TX packets:1498 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:114156 (114.1 KB) TX bytes:114156 (114.1 KB) wlan0 Link encap:Ethernet HWaddr 64:27:37:92:99:0f inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6627:37ff:fe92:990f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1277 errors:0 dropped:0 overruns:0 frame:0 TX packets:472 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:483155 (483.1 KB) TX bytes:61031 (61.0 KB)

  Read the article

• How to host an AP or a hotspot?

  - by user1048138

  I'm running Ubuntu 12.04 as a virtual machine on my Mac. Since I am unable to get the virtual machine to have full access to my WiFi card, I bought another USB WiFi card to use. This is my WiFi card. If you are unfamiliar with Virtual machine, as far as I know, since the Ubuntu has its own card now, it shouldn't matter. I have followed these guides with no luck: https://help.ubuntu.com/community/WifiDocs/WirelessAccessPoint http://www.danbishop.org/2011/12/11/using-hostapd-to-add-wireless-access-point-capabilities-to-an-ubuntu-server/ The problem is that the WiFi connection appears on all of the machines that I have in my house: 2 iPhones, Dell machine running Ubuntu and two Macbooks. However the connection times out on all of these machines. Questions: Could this be a driver issue if that same WiFi card can connect to other WiFi points and use its internet Could this be DHCP related? I would think not. It should at least get a 169.X.X.X address? No? Any solutions for me?

  Read the article

• Broadcom bcm4313 Ubuntu 13.10 connection time out

  - by Wahtever

  After upgrading to Ubuntu 13.10 I keep getting connection timed out every few seconds at which point i have to disconnect and reconnect to the WiFi network. The WiFi card worked fine on 13.04 with the bcmwl-kernel-source installed but giving problems on 13.10: *-network description: Wireless interface product: BCM4313 802.11bgn Wireless Network Adapter vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: c0:14:3d:cc:c9:c7 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.4 latency=0 multicast=yes wireless=IEEE 802.11abg resources: irq:17 memory:f0500000-f0503fff How can i fix this? Thanks

  Read the article

• No Internet Connection - ubuntu 11.10

  - by emersonhsieh

  I installed Ubuntu 11.10 recently. After the first bootup the computer freezes so I have to force-quit my computer. Then I turned on my computer after that. I tried connecting to the internet. My (and my neighbor's) wireless networks shown up, but no matter how many times I tried, I can't connect to my home network. I checked the password and the other laptop's internet works (a MacBookPro). It was a wireless network. What's weird is that the Wireless network worked when I was installing ubuntu How can I connect to the internet now? I don't have a wired network. Please Help! Any help will be appreciated Specs: ASUS F81Se, Windows 7 Dual-boot, I remember the wireless card was made by Atheros, 4GB RAM

  Read the article

• Switching from Debug into Release Mode with VS2010 as IDE and Intel C++ Compiler 13

  - by Drazick

  I have a code of a Plug In from an SDK. The code is in Debug Mode. I use Intel Compiler which only applies optimizations in Release Mode. Under configuration manager of the project only "Debug" mode is defined. How could I switch to "Release" mode and enable all Intel Compiler's optimizations? If I enable them on debug mode nothing is applied (Empty Report). I couldn't find the trick to do so. Thank You.

  Read the article

• Audio output and input stopped working after the last update

  - by renatov

  I'm using Ubuntu 14.04 and everything was perfect until todays's update. Now my audio output (speakers) and input (microphone) stopped working. I guess it's a driver issue, but I need help to debug this problem and to solve it. I have a Dell Inspiron 5421 notebook with an Intel audio integrated sound card: $ lspci | grep Audio 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) If I go to Ubuntu Settings Sound Output, it doesn't show my Intel card there anymore: The same for the Input tab, it doesn's show my Intel card there anymore: Could you please help me?

  Read the article

• Sony VAIO wireless card not connecting intel 4965AGN

  - by marcski55

  I'm running a Sony VAIO VGN-CR410E, and recently moved it to Ubuntu from Windows 7. Both my home and work networks (which I maintain) run WPA/WPA2-PSK authentication for security. My wireless network card (intel 4965AGN) will not connect to them unless I am in the same room (kind of defeats the purpose of wireless). The PC is 4 years old and the routers are brand new (last month or so). Had no problems with it with Win7, but Ubuntu just doesn't like the networks. As an IT manager, my laptop needs to work, so any help is appreciated. If this is a duplicate, please let me know of what. I've spent hours searching and nothing has worked. Thanks for your help. (This is my first experience fully relying on Ubuntu). I can see the networks and attempt connection, but it fails authentication. Let me know of any code you need.

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >