Search Results

Search found 20284 results on 812 pages for 'internet archives'.

Page 68/812 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Vyatta internet connection + hosted site on same IP

  - by boburob

  Having a small issue setting up a vyatta. The company internet and two different websites are both on the same IP. Server 1 - Has websites hosted on ports 1000 and 3000 and also has a proxy server installed to provide internet connection to the domain Server 2 - Has a website hosted on ports 80 and 433 The vyatta is correctly natting the appropriate traffic to each server, and allowing the proxy to get internet traffic, however I have a problem getting to the websites hosted on these two servers inside the domain. I believe the problem is that the HTTP request is being sent with an IP, eg: 12.34.56.78. The request will reach the website and the server will attempt to send the request back to the IP, however this is the IP of the Vyatta, so it has nowhere else to go. I thought the solution would be something like this: rule 50 { destination { address 12.34.56.78 port 1000 } inbound-interface eth1 inside-address { address 10.19.2.3 } protocol tcp type destination } But this doesnt seem to do it! UPDATE I changed the rules to the following: rule 50 { destination { address 12.34.56.78 port 443 } outbound-interface eth1 protocol tcp source { address 10.19.2.3 } type masquerade } rule 51 { destination { address 12.34.56.78 port 443 } inbound-interface eth1 inside-address { address 10.19.2.2 } protocol tcp type destination } I am now seeing traffic going between the two with Wireshark, but the website will still fail to load.

  Read the article

• Motorola Surfboard SB6121 modem conected to 2WIREi38HG wireless router but there's no internet access

  - by Jessica

  I have just switched to Comcast cable internet from AT&T Uverse and I was hoping to use the 2WIRE wireless router with the new Surfboard modem so I can have wireless access. I messed around with some settings and got it working for my laptop (I'm not terribly well versed in computer stuff; I think it was mostly luck) for about a week. The other day I tried to get online and there was no internet connection. I restarted the equipment with no success and then plugged the modem directly into the laptop. This worked, so I knew there was no outage. I connected the ethernet cord to the router and a second cord to my laptop and that worked, too. But when I tried again just with the wireless the laptop connects to the router, but doesn't recognize it or find an internet connection. I tried to go to http://gateway.2Wire.net to fiddle with the settings, but all I get is a Server Not Found page. I tried to check the ip address but this is really kind of over my head and I get different things checking it while plugged into only the modem vs when I plug into the router. Can anyone help? The frustrating thing is that I had it working for awhile, so I know it can do it!

  Read the article

• windows 7 clock jumps back about every hour + internet disconnects

  - by IlyaD

  I have the weirdest problem, for the last few days every hour or so (not exact) the clock jumps about back in jumps of 15 to 60 minutes and after some time the internet disconnects. i can reconnect the internet by unplugging and plugging back the network cable. This is the second time this problem happens to me, the first time was when I installed VirtualBox. whaen I removed it the problem was gone. This time I have no idea what triggered it, the only thing I installed about the time the problem started was iTunes update (10.5.1) I tried removing it but the problem remained. (also tried to remove other programs i installed day or 2 before and it also didn't help) also, this is not a VM and currently I don't have any VM software. any ideas..? UPDATE since the solution is in the comments i'll write it here - apparently the windows time service got broken, this is the fix: http://technet.microsoft.com/en-us/library/cc738995(WS.10).aspx (run "fix it" from IE browser only) UPDATE 2 The fix didn't work, about 2 hours passed and first the internet disconnected and then the clock jumped back... This probably means that the problem is not only in the clock

  Read the article

• Odd one: IE6 showing the "view source" command enabled when I was expecting it to be disabled.

  - by caerphilly

  Hi, OK, I admit this problem is odd. I'm just trying to understand why IE is behaving the way it is. I realise that logic may not apply here :) I have Internet Explorer 6 (Sp1) running on Windows 2000. The IE option "Do not store encrypted pages to disk" is checked (enabled). The temporary internet files folder is empty. TEMP and TMP environment variables are set to valid folders. I'm connected to a web server over SSL. The web server is serving a page over SSL with the HTTP cache-control header set to "no-cache, no-store". I was expecting the "view source" command to be greyed out in this circumstance (as it is on another machine). But it works. When I "view source", I get an entry in the Temporary Internet Files folder with an "internet address" property of "view-source:https://myserver/...." and the content of the page. I wasn't expecting that. I can't understand why one machine is different to another in this regard. Obviously there is some environment/setup difference, but I can't track it down. Anyone have any bright ideas?

  Read the article

• Create a wifi hotspot in a place where an authentication is required [closed]

  - by SoftTimur

  I live in a residence where Internet is provided via cable. Once the computer is connected to the cable, launching a browser will trigger an authentication, I have a username and password to enter, then the internet will be connected. With a gateway (e.g. Wireless Cable Voice Gateway Model CBVG834G) and 2 cables, two PCs can connect to the Internet with my account at the same time. Now the question is, I don't like the cable, and would like to create a wifi hotspot. It seems realizable with the same gateway. According to the instruction on page 2-4 of the manual: Enter http://192.168.0.1 in the address field of your Internet browser. Log in to the gateway with either of the default user names, MSO or admin... However, trying to open 192.168.0.1 gives me an error on the browser. Does anyone know what happened? Is it due to the authentication required by my residence? Is there any other way to build a hotspot of wifi? PS: My system is MAC OS

  Read the article

• Verizon overbilling me ?

  - by bek

  I have verizon air card for my internet. Which is called vz manager. I have had it for about a year. Keeping within my usage allowance the whole time until 3 months ago, when my bill came in my 5,000 g allowance was ran to 18,000. It has continued to do so through the last 3 months. My usage reset itself yesterday for the new month. I got on google for about 5 minutes and chatted for about an hour yesterday online. Mind you that I have never done anything any different then i do everyday. I do not download music or watch videos on my computer, nothing like that. Well since last night a 8 pm my usage sayd 1109.525 gb. ALREADY! For being on the internet for an hour with no downloads. What could be causing this, please thrown me some ideas. Verizon is checking on the problem, but that usually doesnt get me the answer i want. Can someone be hacking my card and using internet through it, has told me that that is not possible, however I think with the internet anytihng is possible.

  Read the article

• VzAccess Manager.

  - by bek

  I have verizon air card for my internet. Which is called vz manager. I have had it for about a year. Keeping within my usage allowance the whole time until 3 months ago, when my bill came in my 5,000 g allowance was ran to 18,000. It has continued to do so through the last 3 months. My usage reset itself yesterday for the new month. I got on google for about 5 minutes and chatted for about an hour yesterday online. Mind you that I have never done anything any different then i do everyday. I do not download music or watch videos on my computer, nothing like that. Well since last night a 8 pm my usage sayd 1109.525 gb. ALREADY! For being on the internet for an hour with no downloads. What could be causing this, please thrown me some ideas. Verizon is checking on the problem, but that usually doesnt get me the answer i want. Can someone be hacking my card and using internet through it, has told me that that is not possible, however I think with the internet anytihng is possible.

  Read the article

• Content Management for WebCenter Installation Guide

  - by Gary Niu

  Overvew As we known, there are two way to install Content Management for WebCenter. One way is install it by WebCenter installer wizard, another way is to install it use their own installer. This guide is for the later one. For SSO purpose, I also mentioned how to config OID identity store for Content Management for WebCenter. Content Management for WebCenter( 10.1.3.5.1) Oracle Enterprise Linux R5U4 Basic Installation -bash-3.2$ ./setup.sh Please select your locale from the list.           1. Chinese-Simplified           2. Chinese-Traditional           3. Deutsch          *4. English-US           5. English-UK           6. Español           7. Français           8. Italiano           9. Japanese          10. Korean          11. Nederlands          12. Português-Brazil Choice? Throughout the install, when entering a text value, you can press Enter to accept the default that appears between square brackets ([]). When selecting from a list, you can select the choice followed by an asterisk by pressing Enter. Select installation type from the list.         *1. Install new server          2. Update a server Choice? Content Server Installation Directory Please enter the full pathname to the installation directory. Content Server Core Folder [/oracle/ucm/server]:/opt/oracle/ucm/server Create Directory         *1. yes          2. no Choice? Java virtual machine         *1. Sun Java 1.5.0_11 JDK          2. Specify a custom Java virtual machine Choice? Installing with Java version 1.5.0_11. Enter the location of the native file repository. This directory contains the native files checked in by contributors. Content Server Native Vault Folder [/opt/oracle/ucm/server/vault/]: Create Directory         *1. yes          2. no Choice? Enter the location of the web-viewable file repository. This directory contains files that can be accessed through the web server. Content Server Weblayout Folder [/opt/oracle/ucm/server/weblayout/]: Create Directory         *1. yes          2. no Choice? This server can be configured to manage its own authentication or to allow another master to act as an authentication proxy. Configure this server as a master or proxied server.         *1. Configure as a master server.          2. Configure as server proxied by a local master server. Choice? During installation, an admin server can be installed and configured to manage this server. If there is already an admin server on this system, you can have the installer configure it to administrate this server instead. Select admin server configuration.         *1. Install an admin server to manage this server.          2. Configure an existing admin server to manage this server.          3. Don't configure an admin server. Choice? Enter the location of an executable to start your web browser. This browser will be used to display the online help. Web Browser Path [/usr/bin/firefox]: Content Server System locale           1. Chinese-Simplified           2. Chinese-Traditional           3. Deutsch          *4. English-US           5. English-UK           6. Español           7. Français           8. Italiano           9. Japanese          10. Korean          11. Nederlands          12. Português-Brazil Choice? Please select the region for your timezone from the list.         *1. Use the timezone setting for your operating system          2. Pacific          3. America          4. Atlantic          5. Europe          6. Africa          7. Asia          8. Indian          9. Australia Choice? Please enter the port number that will be used to connect to the Content Server. This port must be otherwise unused. Content Server Port [4444]: Please enter the port number that will be used to connect to the Admin Server. This port must be otherwise unused. Admin Server Port [4440]: Enter a security filter for the server port. Hosts which are allowed to communicate directly with the server port may access any resources managed by the server. Insure that hosts which need access are included in the filter. See the installation guide for more details. Incoming connection address filter [127.0.0.1]:*.*.*.* *** Content Server URL Prefix The URL prefix specified here is used when generating HTML pages that refer to the contents of the weblayout directory within the installation. This prefix must be mapped in the web server Additional Document Directories section of the Content Management administration menu to the physical location of the weblayout directory. For example, "/idc/" would be used in your installation to refer to the URL http://ucm.company.com/idc which would be mapped in the web server to the physical location /oracle/ucm/server/weblayout. Web Server Relative Root [/idc/]: Enter the name of the local mail server. The server will contact this system to deliver email. Company Mail Server [mail]: Enter the e-mail address for the system administrator. Administrator E-Mail Address [sysadmin@mail]: *** Web Server Address Many generated HTML pages refer to the web server you are using. The address specified here will be used when generating those pages. The address should include the host and domain name in most cases. If your webserver is running on a port other than 80, append a colon and the port number. Examples: www.company.com, ucm.company.com:90 Web Server HTTP Address [yekki]:yekki.cn.oracle.com:7777 Enter the name for this instance. This name should be unique across your entire enterprise. It may not contain characters other than letters, numbers, and underscores. Server Instance Name [idc]: Enter a short label for this instance. This label is used on web pages to identify this instance. It should be less than 12 characters long. Server Instance Label [idc]: Enter a long description for this instance. Server Description [Content Server idc]: Web Server         *1. Apache          2. Sun ONE          3. Configure manually Choice? Please select a database from the list below to use with the Content Server. Content Server Database         *1. Oracle          2. Microsoft SQL Server 2005          3. Microsoft SQL Server 2000          4. Sybase          5. DB2          6. Custom JDBC settings          7. Skip database configuration Choice? Manually configure JDBC settings for this database          1. yes         *2. no Choice? Oracle Server Hostname [localhost]: Oracle Listener Port Number [1521]: *** Database User ID The user name is used to log into the database used by the content server. Oracle User [user]:YEKKI_OCSERVER *** Database Password The password is used to log into the database used by the content server. Oracle Password []:oracle Oracle Instance Name [ORACLE]:orcl Configure the JVM to find the JDBC driver in a specific jar file          1. yes         *2. no Choice? The installer can attempt to create the database tables or you can manually create them. If you choose to manually create the tables, you should create them now. Attempt to create database tables          1. yes         *2. no Choice? Select components to install.          1. ContentFolios: Collect related items in folios          2. Folders_g: Organize content into hierarchical folders          3. LinkManager8: Hypertext link management support          4. OracleTextSearch: External Oracle 11g database as search indexer support          5. ThreadedDiscussions: Threaded discussion management Enter numbers separated by commas to toggle, 0 to unselect all, F to finish: 1,2,3,4,5         *1. ContentFolios: Collect related items in folios         *2. Folders_g: Organize content into hierarchical folders         *3. LinkManager8: Hypertext link management support         *4. OracleTextSearch: External Oracle 11g database as search indexer support         *5. ThreadedDiscussions: Threaded discussion management Enter numbers separated by commas to toggle, 0 to unselect all, F to finish: F Checking configuration. . . Configuration OK. Review install settings. . . Content Server Core Folder: /opt/oracle/ucm/server Java virtual machine: Sun Java 1.5.0_11 JDK Content Server Native Vault Folder: /opt/oracle/ucm/server/vault/ Content Server Weblayout Folder: /opt/oracle/ucm/server/weblayout/ Proxy authentication through another server: no Install admin server: yes Web Browser Path: /usr/bin/firefox Content Server System locale: English-US Content Server Port: 4444 Admin Server Port: 4440 Incoming connection address filter: *.*.*.* Web Server Relative Root: /idc/ Company Mail Server: mail Administrator E-Mail Address: sysadmin@mail Web Server HTTP Address: yekki.cn.oracle.com:7777 Server Instance Name: idc Server Instance Label: idc Server Description: Content Server idc Web Server: Apache Content Server Database: Oracle Manually configure JDBC settings for this database: false Oracle Server Hostname: localhost Oracle Listener Port Number: 1521 Oracle User: YEKKI_OCSERVER Oracle Password: 6GP1gBgzSyKa4JW10U8UqqPznr/lzkNn/Ojf6M8GJ8I= Oracle Instance Name: orcl Configure the JVM to find the JDBC driver in a specific jar file: false Attempt to create database tables: no Components: ContentFolios,Folders_g,LinkManager8,OracleTextSearch,ThreadedDiscussions Proceed with install         *1. Proceed          2. Change configuration          3. Recheck the configuration          4. Abort installation Choice? Finished install type Install with warnings at 4/2/10 12:32 AM. Run Scripts -bash-3.2$ ./wc_contentserverconfig.sh /opt/oracle/ucm/server /mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/CS10gR35UpdateBundle.zip' Service 'DELETE_DOC' Extended Service 'DELETE_BYREV_REVISION' Extended Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/ContentAccess/ContentAccess-linux.zip' (internal)      04.02 00:40:38.019      main    updateDocMetaDefinitionV11: adding decimal column Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/Folders_g.zip' Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/FusionLibraries.zip' Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/JpsUserProvider.zip' Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/WcConfigure.zip' Apr 2, 2010 12:41:24 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:24 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Apr 2, 2010 12:41:27 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:27 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Apr 2, 2010 12:41:28 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:28 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Restart Content Server to apply updates. Configuring Apache Web Server append the following lines at httpd.conf: include "/opt/oracle/ucm/server/data/users/apache22/apache.conf" Configuring the Identity Store( Optional ) 1.  Stop Oracle Content Server and the Admin Server 2.  Update the Oracle Content Server's JPS configuration file, jps-config.xml: a. add a service instance <serviceInstance provider="idstore.ldap.provider" name="idstore.oid"> <property name="subscriber.name" value="dc=cn,dc=oracle,dc=com"></property> <property name="idstore.type" value="OID"></property> <property name="security.principal.key" value="ldap.credential"></property> <property name="security.principal.alias" value="JPS"></property> <property name="ldap.url" value="ldap://yekki.cn.oracle.com:3060"></property> <extendedProperty> <name>user.search.bases</name> <values> <value>cn=users,dc=cn,dc=oracle,dc=com</value> </values> </extendedProperty> <extendedProperty> <name>group.search.bases</name> <values> <value>cn=groups,dc=cn,dc=oracle,dc=com</value> </values> </extendedProperty> <property name="username.attr" value="uid"></property> <property name="user.login.attr" value="uid"></property> <property name="groupname.attr" value="cn"></property> </serviceInstance> b. Ensure that the <jpsContext> entry in the jps-config.xml file refers to the new serviceInstance, that is, idstore.oid and not idstore.ldap: <jpsContext name="default"> <serviceInstanceRef ref="idstore.oid"/> 3. Run the new script to setup the credentials for idstore.oid in the credential store: cd CONTENT_SERVER_HOME/custom/FusionLibraries/tools -bash-3.2$ ./run_credtool.sh Buildfile: ./../tools/credtool.xml     [input] skipping input as property action has already been set.     [input] Alias: [JPS]     [input] Key: [ldap.credential]     [input] User Name: cn=orcladmin     [input] Password: welcome1     [input] JPS Config: [/opt/oracle/ucm/server/custom/FusionLibraries/tools/../../../config/jps-config.xml] manage-creds:      [echo] @@@ Help: run 'ant manage-creds' command to see the detailed usage      [java] Using default context in /opt/oracle/ucm/server/custom/FusionLibraries/tools/../../../config/jps-config.xml file for credential store.      [java] Credential store location : /opt/oracle/ucm/server/config      [java] Credential with map JPS key ldap.credential stored successfully!      [java]      [java]      [java]     Credential for map JPS and key ldap.credential is:      [java]             PasswordCredential name : cn=orcladmin      [java]             PasswordCredential password : welcome1 BUILD SUCCESSFUL Total time: 1 minute 27 seconds Testing 1. acces http://yekki.cn.oracle.com:7777/idc 2. login in with OID user, for example: orcladmin/welcome1 3. make sure your JpsUserProvider status is "good"

  Read the article

• Sputnik – Google’s Java script conformance tester now as website

  - by samsudeen

  Sputnik the JavaScript 3 conformance test suite launched by Google last year is now available as Google Labs (Sputnik Test)product. You can browse it like any other  website and run over 5000 java script function tests to check your browser compatibility This product allows you do the following options Run :  You can run the complete test suite on your browser to check the compliance to  ECMA-262 standards.You can also browse trough  the failed test case. Compare : You can compare java script conformance of the various leading browsers in the market. Now web developers can be more cautious while designing websites to make them compatible with multiple browsers. Google is committed to review and release multiple version periodically with updated test cases. According to the latest sputnik test  result released by Google, Opera 10.5 leads the race with only 78 failures. Microsoft IE 8 performed the worst (463 failures) . Next to Opera,  Apple’s Safari (159 failures), Google’s Chrome (218 failures) and Mozilla’s Firefox (259 failures) leads respectively Though the test are about conformance, not performance, the top 3 leading browsers are among the last three in conformance which is something they have to improve Join us on Facebook to read all our stories right inside your Facebook news feed.

  Read the article

• Download Microsoft’s Series of ‘Work Smart’ Guides for Windows 8

  - by Asian Angel

  The general release date for Windows 8 is almost here and Microsoft has released a terrific set of free ‘Work Smart’ guides to help you get started with the new operating system. Whether it is an overview of Windows 8 itself, shortcut keys, backups, and more these guides cover a nice range of topics. HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

  Read the article

• float right image pushes down text in table below in IE9 [migrated]

  - by Cheers and hth. - Alf

  I'm not a webmaster, not even a web developer, but I'm tasked with adding content to a Wordpress site developed by Someone Else(TM). Here's a page illustrating the problem: http://www.reginedagan.no/program/fiskekonkurranse-i-hovden/. It shows up nice in Firefox: But in IE9 the floated picture pushed down the text in the table below, so that it looks rather awful: I found some related questions on the web, e.g. "CSS: Float right in IE doesn't work!" and "why does a floating DIV mess up table positioning?", and the suggestions there led me to set clear: none on the div around the table, the table itself, and then each individual tr and finally even on each individual td. I also set width="99%" on the table, and tried (but I don't know how correctly) to apply the IE6 quirk fix margin-right: -3px. So here's the content as written in Wordpress, including the unsuccessful attempted fixes: <h1><div style="float: right"><a href="http://www.reginedagan.no/?attachment_id=671"><img src="http://www.reginedagan.no/wp-content/uploads/2012/06/fiskekonkurranse-2011-bilde-3-nedskalert.jpg" alt="Fra fiskekonkurransen i 2011" title="Fra fiskekonkurransen i 2011" width="200" height="242" class="size-full wp-image-671"/></a></div>Fiskekonkurranse i Hovden!</h1> <div style="background-color: #FAF0F0; clear: none;"><table width="99%" style="clear: none; right-margin: -3px;"> <tr style=" clear: none;"> <td style="text-align: left; clear: none;">Dato:</td> <td style="text-align: left; clear: none;">Lørdag 21.juli</td> </tr> <tr style=" clear: none;"> <td style="text-align: left; padding-left: 2em"; clear: none;>/ barn, Flytebrygga</td> <td style="text-align: left; clear: none;">15.00 &ndash; 16.00</td> </tr> <tr style=" clear: none;"> <td style="text-align: left; padding-left: 2em; clear: none;">/ voksne (over 12 år), Moloen</td> <td style="text-align: left; clear: none;">15.00 &ndash; 17.00 </td> </tr> <tr style=" clear: none;"> <td style="text-align: left; clear: none;">Sted:</td> <td style="text-align: left; clear: none;">Hovden</td> </tr> <tr style=" clear: none;"> <td style="text-align: left; clear: none;">Pris:</td> <td style="text-align: left; clear: none;">voksen (over 12 år) kr. 50,-, barn kr. 30,-</td> </tr style=" clear: none;"> <tr> <td style="text-align: left; clear: none;">Arrangør:</td> <td style="text-align: left; clear: none;">Hovden Grendelag</td> </tr> </table></div> Velkommen til den årlige Fiskekonkurransen i Hovden lørdag 21. juli! <a href="http://www.reginedagan.no/program/fiskekonkurranse-i-hovden/fiskekonkurranse-2011-bilde-nedskalertjpg/" rel="attachment wp-att-672"><img src="http://www.reginedagan.no/wp-content/uploads/2012/03/fiskekonkurranse-2011-bilde-nedskalertjpg.jpg" alt="Fra fiskekonkurransen i 2011" title="Fra fiskekonkurransen i 2011" width="400" height="267" class="alignleft size-full wp-image-672" /></a>Det blir stangfiske fra moloen og egen barnekonkurranse fra flytebrygga. Premiering for størst fisk, størst antall kg og flest antall stk. Premiering for barn kl. 16:30 på moloen. Alle premieres. Premiering for voksne på festen om kvelden. Salg av pølser og brus, vafler og kaffe, samt sluker. <div style="clear: left; border: 1px dashed gray; padding: 1em;"> Fest på Hovden samfunnshus kl. 21 &ndash; 02. Musikk: «Mister West», Steinar Aarsnes, Andøya. CC. Salg av øl/vin og snacks. </div> VEL MØTT &mdash; SKITT FISKE! And the resulting HTML served to a browser (only the relevant first part): <div style="float: right;"><a href="http://www.reginedagan.no/?attachment_id=671"><img src="http://www.reginedagan.no/wp-content/uploads/2012/06/fiskekonkurranse-2011-bilde-3-nedskalert.jpg" alt="Fra fiskekonkurransen i 2011" title="Fra fiskekonkurransen i 2011" class="size-full wp-image-671" height="242" width="200"></a></div> <p>Fiskekonkurranse i Hovden!</p></h1> <div style="background-color: rgb(250, 240, 240); clear: none;"> <table style="clear: none;" width="99%"> <tbody><tr style="clear: none;"> <td style="text-align: left; clear: none;">Dato:</td> <td style="text-align: left; clear: none;">Lørdag 21.juli</td> </tr> The able to reproduce the effect with simpler code by setting clear: right on the table. However, I'm unable to reproduce the effect with default styling or with clear: none (as above). So it seems maybe it's something Wordpress does, or maybe it's something the theme thing or whatever it is does – but it's very similar to what others have observed, so there is strong indication that it's also a quirk in IE. Help?

  Read the article

• Ask How-To Geek: Diagnosing DSL Hang Ups, Extracting Media from PowerPoint, Restricting IE to a Single Web Page

  - by Jason Fitzpatrick

  This week we take a look at flaky DSL connections, extracting media from PowerPoint presentations, and how to lock down IE to a single website without any additional software or network configuration hacking necessary. Once a week we dip into our reader mailbag and help readers solve their problems, sharing the useful solutions with you in the process. Read on to see our fixes for this week’s reader dilemmas. Latest Features How-To Geek ETC How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? Page Zipper Unpacks Multi-Page Articles for Single-Page Display Minty Bug: Build an FM Bug Inside a Mint Container Get the MakeUseOf eBook Guide to Hacker Proofing Your PC Sync Your Windows Computer with Your Ubuntu One Account [Desktop Client] Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video] TV Antenna Helper Makes HDTV Antenna Calibration a Snap

  Read the article

• Where to find other versions of Opera browser as deb packages?

  - by cipricus

  I used Opera mainly for the Unite feature now to be abandoned. It is missing in v. 12. Some say its features will re-emerge in future extensions etc. Until then, Unite is still accessible in v. 11. Where do I get the v.11 deb? P.S. In fact it seems that opera unite (at least in its older form) is dying while I am editing this question. Access to opera-unite applications from within opera-unite is poor or absent. This issue is obscure to me for now (31.08.2012) because yesterday I have installed v12 in Windows OS (with opera-unite and basic applications - file sharing and media player - already installed) and it is still working (server is working). The v12 Ubuntu version came today without unite, and after installing v11 (which has unite) I could not get applications (file sharing, etc). But they are still available: here and after downloading these files which have te .ua extension, they can be installed by opening them with Opera (v.11) But as opera-unite is no longer supported, it is possible that the server that provides the file sharing etc will soon be unaccessible. Even if that is the case the question should maybe not be closed at it has a general usefulness independently of the unite issue.

  Read the article

• The Beginner’s Guide To Tabbed Browsing

  - by Chris Hoffman

  Tabs allow you to open multiple web pages in a single browser window without cluttering your desktop. Mastering tabbed browsing can speed up your browsing experience and make multiple web pages easier to manage. Tabbed browsing was once the domain of geeks using alternative browsers, but every popular browser now supports tabbed browsing – even mobile browsers on smartphones and tablets. This article is intended for beginners. If you know someone that doesn’t fully understand tabbed browsing and how awesome it is, feel free to send it to them! How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

  Read the article

• How to Assign a Static IP to an Ubuntu 10.04 Desktop Computer

  - by Mysticgeek

  If you have a home network with several computers, assigning them static IP addresses can make troubleshooting easier. Today we take a look at switching from DHCP to a static IP in Ubuntu. Assign a Static IP Using Static IPs prevents address conflicts between machines and can allow easier access to them. If you have a small home network and are satisfied with the machines getting their IP address automatically via DHCP, there won’t be anything gained by using static addresses. Using Static IPs isn’t necessarily for the average user, but if you’re a geek who wants to know the address assigned to each machine, it can allow for faster troubleshooting.  To change your Ubuntu machine to a Static IP go to System \ Preferences \ Network Connections. In our example, we’re on a wired system so click on the Wired tab, then select Auto eth0 and click on Edit. Select the IPv4 settings tab, change Method to Manual, click the Add button. Then type in the Static IP Address, Subnet Mask, DNS Servers, and Default Gateway. Then click Apply when you’re finished. Make sure to hit Enter after typing in the Default Gateway otherwise it will revert back to 0.0.0.0 You’ll need to enter in your admin password before the changes go into affect. To verify the changes have been made successfully launch a Terminal session and type in ifconfig at the command prompt, or follow these directions. You also might want to ping the address from another machine to make sure everything is communicating. If you want to assign a Static IP to your Windows machines, check out our article on how to assign a Static IP on Windows systems (make sure to browse the comments as our readers have some good suggestions).  Whether you have a small office or home network set up with a server and several machines, using a Static IP on each device can help you manage them easily. Again, it isn’t for everyone as it really depends on how your network is setup and the way you use it. Similar Articles Productive Geek Tips Change Ubuntu Desktop from DHCP to a Static IP AddressAllow Remote Control To Your Desktop On UbuntuAssign Custom Shortcut Keys on Ubuntu LinuxKeyboard Ninja: 21 Keyboard Shortcut ArticlesChange Ubuntu Server from DHCP to a Static IP Address TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries

  Read the article

• FFmpeg Video Hosting for Linux and Windows Server

  - by Aditi

  FFmpeg hosting is a special type of web hosting where the host servers have video transcoding software loaded on them, which allows the automatic conversion of videos from one format to another. FFmpeg is a cross-platform solution for recording, converting, transcoding and stream audio and video. It includes libavcodec – the leading audio/video codec library. FFmpeg hosting gets its name from a set of server side programs (modules) called FFmpeg. There are a number of applications or web scripts available, which allow webmasters to create their own video sharing websites. Video hosting typically requires: PHP 4.3 and above (including support of CLI) Mencoder and also Mplayer FFMpeg-PHP MySQL database server LAME MP3 Encoder Libogg + Libvorbis GD Library 2 or higher CGI-BIN There are number of web service providers who provide FFmpeg hosting service. Following is a list of some of the Best FFmpeg hosting providers for both Linux and Windows Server below. Dream Host Dreamhost provides for web based email access, mail filtering, spam filtering, unlimited email ids, vacation autoresponder, python support, full CGI access and many more services. Price: $7.95 View Details Micfo It offers unlimited disk space and bandwidth. Other services include free domain for life and free Website Transfer with many more services. All in all one of the best option to consider. Price: $5 View Details Host Upon HostUpon offers FFMpeg Hosting on all their hosting packages, with readily installed modules to start a Video website or Social Network with Video uploading. These scripts such as Boonex Dolphin / PHPMotion / Social Engine / ABKsoft Scripts / Joomla Video Plugin / Clipshare / ClipBucket / Social Media / Rayzz / Vidi Script work with their ffmpeg. Their FFMPEG hosting plan offers 24/7/365 support with typical response time of 15min or less. Price: $5.95 View Details DownTown Host DownTown Host provides full and exceptional support by live chat and telephone. It has high-power, modern servers and the finest web server technology. It offers free search engine Submission and continuous data backup protection with free email forwarding and site move. There are many more services too. Site5 This ffmpeg service provider offers uptime guarantee, a real time stats on each server and many more attractive services. Price: $4.95 View Details Cirtex Hosting Cirtex Hosting allows to host 7 websites & domains and provides for unlimited storage space and monthly bandwidth. It also offers FTP and email accounts and many more services. Price: $2.49 View Details FLV Hosting FLV hosting supplies RTMP SERVER STREAMING for large size video streaming and server side recording. It is flexible and costs less. They customize to the clients requirements. Price: $9.95 View Details AptHost This hosting service provides for 24x7x365 Premium Support and fully ffmpeg enabled services. Price: $4.95 View Details HostMDS Great Support, Priced Low. It provides for SSH access, CGI, Ruby on Rails, Perl, PHP, MySQL, front page extentions, 24/7 Support, FREE Domain transfer and spam filtering. It offers instant account setup, low latency fast bandwidth & much more! They were formerly known as Vistapages. Price: $4.95 View Details Related posts:Best WordPress Video Themes for a Video Blog Free Web Based Applications 24+ Coda Alternatives for Windows and Linux

  Read the article

• How to get Spotify running?

  - by Dante Ashton

  A while ago Spotify (the streaming music service) came out with a preview for Linux of their client. I had succesfully run it throughout 10.04. Now I'm on 10.10, I can't seem to find it in the package manager, let alone install it. Software Sources gives me this; Failed to fetch http://repository.spotify.com/dists/stable/Release Unable to find expected entry non-free/source/Sources in Meta-index file (malformed Release file?) Some index files failed to download, they have been ignored, or old ones used instead. So...as I'm paying for Spotify what...umm...do I do? :P

  Read the article

• wireless detected but Can't connect to network, Wifi card intel pro wireless N100 BGN

  - by Alexandre777

  Thanks in advance, I installed Linux Mint kernel 3.0.0-12 x64 ,wireless is detected and I configure it in network manager but can't coonect, there are the results of command line: $ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off $ sudo lshw -C network** *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:51:c9:d6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:48 memory:d7400000-d7401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:5b:39:99:8f:16 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Thank you.

  Read the article

• Save chromium browser's session

  - by Anwar Shah

  How to manually save session in chromium-brower. I have a Notebook with damaged battery (only gives 5~6 minutes of backup, planning to buy a new one), and in our country "Load Shedding" (power outages) is quite common. So, I had to close my session before shutting down my laptop. When I re-open chromium, there is no tab with previous session. The question is: How can i manually save my session before closing the laptop?

  Read the article

• Why do browsers leak memory?

  - by Dane Balia

  A colleague and I were speaking about browsers (using a browser control object in a project), and it appears as plain as day that all browsers (Firefox, Chrome, IE, Opera) display the same characteristic or side-effect from their usage and that being 'Leaking Memory'. Can someone explain why that is the case? Surely as with any form of code, there should be proper garbage collection? PS. I've read about some defensive patterns on why this can happen from a developer's perspective. I am aware of an article Crockford wrote on IE; but why is the problem symptomatic of every browser? Thanks

  Read the article

• How to future-proof my touch-enabled web application?

  - by Rice Flour Cookies

  I recently went out and purchased a touch-screen monitor with the intention of learning how to program touch-enabled web applications. I had reviewed the MDN documentation about touch events, as well as the W3C specification. To get started, I wrote a very short test page with two event handlers: one for the mousedown event and one for the touchstart event. I fired up the web page in IE and touched the document and found that only the mousedown event fired. I saw the same behavior with Firefox, only to find out later that Firefox can be set to enable the touchstart event using about:config. When touch events are enabled, the touchstart event fires, but not mousedown. Chrome was even stranger: it fired both events when I touched the document: touchstart and mousedown, in that order. Only on my Android phone does it appear to be the case that only the touchstart event fires when I touch the document. I did a a Google search and ended up on two interesting pages. First, I found the page on CanIUse for touch events: http://caniuse.com/#feat=touch Can I Use clearly indicates that IE does not support touch events as of this writing, and Firefox only supports touch events if they are manually enabled. Furthermore, all four browsers I mentioned treat the touch in a completely different way. It boils down to this: IE: simulated mouse click Firefox with touch disabled: simulated mouse click Firefox with touch enabled: touch event Chrome: touch event and simulated mouse click Android: touch event What is more frustrating is that Google also found a Microsoft page called RethinkIE. RethinkIE brags about touch support in IE; as a matter of fact, one of their slogans is "Touch the Web". It links to a number of touch-based application. I followed some of these links, and as best I can tell, it's just like CanIUse described; no proper touch support; just simulated mouse clicks. The MDN (https://developer.mozilla.org/en-US/docs/Web/API/Touch) and W3C (http://www.w3.org/TR/touch-events/) documentation describe a far richer interface; an interface that doesn't just simulate mouse clicks, but keeps track of multiple touches at once, the contact area, rotation, and force of each touch, and unique identifiers for each touch so that they can be tracked individually. I don't see how simulated mouse clicks can ever touch the above described functionality, which, once again, is part of the W3C specification, although it is listed as "non-normative", meaning that a browser can claim to be standards-compliant without implementing it. (Why bother making it part of the standard, then?) What motivated my research is that I've written an HTML5 application that doesn't work on Android because Android doesn't fire mouse events. I'm now afraid to try to implement touch for my application because the browsers all behave so differently. I imagine that at some time in the future, the browsers might start handling touch similarly, but how can I tell how they might be handled in the future short of writing code to handle the behavior of each individual browser? Is it possible to write code today that will work with touch-enabled browsers for years to come? If so, how?

  Read the article

• How to Automatically Backup Your Gmail Attachments With IFTTT

  - by Mark Wilson

  When it comes to getting things done quickly, automation is the name of the game. We’ve looked at IFTTT before, and a new batch of updates has introduced a number of options that can be used to automatically do things with files that are sent to your Gmail address. What could this be used for? Well the most obvious starting point is to simply create a backup of any files that you receive via email. This is useful if you find that you often reach the size limit for your inbox as it enables you to delete emails without having to worry about losing the associated files. Start by paying a visit to the IFTTT website and then either sign into an existing account or create a new one.     

  Read the article

• how do i fix this: the networking and wireless are enabled. but list of networks under wireless networks not available

  - by Ayesha Ahmad

  i started working with ubuntu 11.10 last year. i upgraded to 12.04 a week back. since then i have had all sorts of problems with network connection. first had to install the new driver. the hardware switch somehow got disabled then the above problem arrived. even tho the options are all enabled, the OS is not able to detect scan available network connections. also i have to bring to notice that once in a while it does get connected, can not explain how it happens. I want to fix this problem once and for all. please help. ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:51:b3:c8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:44 eth1 Link encap:Ethernet HWaddr 1c:65:9d:67:d5:e1 inet6 addr: fe80::1e65:9dff:fe67:d5e1/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:170 TX packets:0 errors:27 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:344 errors:0 dropped:0 overruns:0 frame:0 TX packets:344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20336 (20.3 KB) TX bytes:20336 (20.3 KB) lshw -c network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 1c:65:9d:67:d5:e1 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: f0:4d:a2:51:b3:c8 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:196 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) I hope this information is of some help.

  Read the article

• http, https and ftp is not working but smtp and imap is working

  - by Unicron

  hi all, yesterday on a computer of a friend a strange thing happened. after booting the ports fo http, https and ftp are closed but e-mail is still working. in the control panel the windows firewall seems active even if he tries to deactivate it. i have a suspision that it is the faul of norton internet security 2010, we have tried to uninstall it, but the uninstallation did not work. when using the removal tool from symantec it just goes to 23% and then it crashes. the process ccSvcHst.exe is still running. how can i safeley remove the rest of norton internet security? thanks in advance [edit] norton internet security 2010 is sucesfully removed, but still no connectivity

  Read the article

• What would be the total expenses of running an in-home web server?

  - by techaddict

  I have several hosting accounts with companies, and plan to keep them. However, I would like to try my hand at creating my own home web-server, both for fun and for the learning experience. I would like to know the expenses involved, including: electricity costs (greater than light bulb?) internet costs (will I have to upgrade my internet? Or is 3-5Mbps upload speed fine for a web server with medium amount of traffic? Would I have to get a separate internet connection?) other unknown expenses Consider that I will configure the web server myself, so that is not an expense. Also consider that I already have a computer (year-old Dell laptop, 15R) to use to be dedicated as the web server.

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >