Search Results

Search found 12281 results on 492 pages for 'ip blocking'.

Page 68/492 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

  • Git apache : unable to push via http

    - by GlinesMome
    I have to setup a server which can allow http vcs management (such as git and svn). svn support works well, but I have some trouble with git. Actual configuration: CentOS 5 Apache 2.2.8 Git 1.7.4.1 The /etc/httpd/conf/httpd.conf content: ServerTokens OS ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 120 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 10 <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> <IfModule worker.c> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Listen 80 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule mysql_auth_module modules/mod_auth_mysql.so LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-3.0.2/ext/apache2/mod_passenger.so PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-3.0.2 PassengerRuby /usr/bin/ruby Include conf.d/*.conf User apache Group apache ServerAdmin aedi.admin@domain ServerName s1.domain UseCanonicalName Off DocumentRoot "/data/www/" <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/data/www/"> Options -Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> <IfModule mod_userdir.c> UserDir disable </IfModule> DirectoryIndex index.html index.html.var AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> TypesConfig /etc/mime.types DefaultType text/plain <IfModule mod_mime_magic.c> MIMEMagicFile conf/magic </IfModule> HostnameLookups Off ErrorLog logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log combined ServerSignature On Alias /icons/ "/var/www/icons/" <Directory "/var/www/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </IfModule> </Directory> <IfModule mod_dav_fs.c> DAVLockDB /var/lib/dav/lockdb ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" <Directory "/var/www/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ DefaultIcon /icons/unknown.gif ReadmeName README.html HeaderName HEADER.html AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddHandler type-map var AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/error/" <IfModule mod_negotiation.c> <IfModule mod_include.c> <Directory "/var/www/error"> AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en es de fr ForceLanguagePriority Prefer Fallback </Directory> </IfModule> </IfModule> BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:80> DocumentRoot /data/www/s1/html ServerName s1.asso.domain ErrorLog logs/s1.error.log </VirtualHost> <VirtualHost *:80> DocumentRoot /data/www/s2/old ServerName s2.domain ErrorLog logs/s2.error.log RailsBaseURI /blog <Directory /data/www/s2/html/blog> Options -MultiViews </Directory> </VirtualHost> <VirtualHost *:443> DocumentRoot /data/www/s2/html ServerName s2.domain ErrorLog logs/s2.error.log RailsBaseURI /blog <Directory /data/www/s2/html/blog> Options -MultiViews </Directory> </VirtualHost> The /etc/httpd/conf.d/git.conf content: Alias /git /data/www/s2/git <Directory /data/www/s2/git> Options +Indexes DAV on SSLRequireSSL </Directory> Fine, every repository are created by the same way: git --bare init "$1.git" && cd "$1.git" && git update-server-info && chmod -R 770 . && cd .. && git clone `pwd`/"$1.git" && cd "$1" && echo 42 > answer && git add . && git commit -m "Initial commit" && git push origin master && git rm answer && git commit -a -m "Clean repository" && git push && cd .. && rm -Rf "$1" Then, on the client side, I try: ~ $ git clone https://s2.domain/git/repo.git Cloning into 'repo'... warning: You appear to have cloned an empty repository. ~ $ cd repo repo $ echo 42 > answer && git add . && git commit -m "init" && git push origin master [master (root-commit) a2aadb1] init 1 file changed, 1 insertion(+) create mode 100644 answer Fetching remote heads... refs/ refs/heads/ refs/tags/ updating 'refs/heads/master' from 0000000000000000000000000000000000000000 to a2aadb1772e12104ce358f7ff9a11db5d93ead7d sending 3 objects MOVE d81cc0710eb6cf9efd5b920a8453e1e07157b6cd failed, aborting (22/502) MOVE 2c186ad49fa24695512df5e41cb5e6f2d33c119b failed, aborting (22/502) MOVE a2aadb1772e12104ce358f7ff9a11db5d93ead7d failed, aborting (22/502) Updating remote server info fatal: git-http-push failed The apache associated logs: my.ip - - [21/Sep/2012:16:19:19 +0200] "GET /git/repo.git/info/refs?service=git-upload-pack HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:19 +0200] "GET /git/repo.git/HEAD HTTP/1.1" 200 23 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:48 +0200] "GET /git/repo.git/info/refs?service=git-receive-pack HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "GET /git/repo.git/HEAD HTTP/1.1" 200 23 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/ HTTP/1.1" 207 569 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "HEAD /git/repo.git/info/refs HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "HEAD /git/repo.git/objects/info/packs HTTP/1.1" 200 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/info/ HTTP/1.1" 405 336 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "LOCK /git/repo.git/info/refs HTTP/1.1" 200 475 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "GET /git/repo.git/objects/info/packs HTTP/1.1" 200 1 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/ HTTP/1.1" 207 2608 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/heads/ HTTP/1.1" 207 941 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/tags/ HTTP/1.1" 207 940 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/refs/ HTTP/1.1" 405 336 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/refs/heads/ HTTP/1.1" 405 342 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "LOCK /git/repo.git/refs/heads/master HTTP/1.1" 200 475 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/objects/a2/ HTTP/1.1" 404 317 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/objects/2c/ HTTP/1.1" 207 4565 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/objects/d8/ HTTP/1.1" 207 4565 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PUT /git/repo.git/objects/d8/1cc0710eb6cf9efd5b920a8453e1e07157b6cd_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 201 373 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MKCOL /git/repo.git/objects/a2/ HTTP/1.1" 201 296 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PUT /git/repo.git/objects/2c/186ad49fa24695512df5e41cb5e6f2d33c119b_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 201 373 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MOVE /git/repo.git/objects/d8/1cc0710eb6cf9efd5b920a8453e1e07157b6cd_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 502 341 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MOVE /git/repo.git/objects/2c/186ad49fa24695512df5e41cb5e6f2d33c119b_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 502 341 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PUT /git/repo.git/objects/a2/aadb1772e12104ce358f7ff9a11db5d93ead7d_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 201 373 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "MOVE /git/repo.git/objects/a2/aadb1772e12104ce358f7ff9a11db5d93ead7d_20ca3a58daa09e54112968cbd4e86580b6301074 HTTP/1.1" 502 341 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "UNLOCK /git/repo.git/refs/heads/master HTTP/1.1" 204 - "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/ HTTP/1.1" 207 2608 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/heads/ HTTP/1.1" 207 941 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "PROPFIND /git/repo.git/refs/tags/ HTTP/1.1" 207 940 "-" "git/1.7.11.4" my.ip - - [21/Sep/2012:16:19:49 +0200] "UNLOCK /git/repo.git/info/refs HTTP/1.1" 204 - "-" "git/1.7.11.4" I have tried many configurations (even smart http from progit), but a major part of them consider the fact that they have a dedicated domain, but I'm in a sub-directory, so I can't apply these examples. Have you got an idea of the problem? have you got solutions? have you got configuration example with non-root directory? For your help, In advance, Thanks.

    Read the article

  • routing specific IP to ppp0 tunnel

    - by gompertz
    Hi All, I feel I've struggled with this long enough and need some help. I have a pptp tunnel and am trying to route destination traffic from 208.85.40.20 to the pptp tunnel (ppp0). (Keen observers may recognize the ip as being that of pandora.com). I am doing all this configuration on a router... and I know it's not working successfully as traceroute yields nothing but astericks. I've pasted relevant outputs below: (with some "security" editing to the addresses) root@OpenWrt:~# ifconfig br0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28185 errors:0 dropped:0 overruns:0 frame:0 TX packets:24936 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4894242 (4.6 MiB) TX bytes:5941902 (5.6 MiB) eth0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:51829 errors:0 dropped:0 overruns:0 frame:0 TX packets:56824 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11490288 (10.9 MiB) TX bytes:11857913 (11.3 MiB) Interrupt:4 eth2 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:15426 TX packets:9529 errors:21 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:423 (423.0 B) TX bytes:596036 (582.0 KiB) Interrupt:2 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:30 errors:0 dropped:0 overruns:0 frame:0 TX packets:30 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2300 (2.2 KiB) TX bytes:2300 (2.2 KiB) ppp0 Link encap:Point-Point Protocol inet addr:68.68.39.250 P-t-P:172.16.20.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:165 errors:2 dropped:0 overruns:0 frame:0 TX packets:68 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:7006 (6.8 KiB) TX bytes:3462 (3.3 KiB) vlan0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:28182 errors:0 dropped:0 overruns:0 frame:0 TX packets:33813 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5006544 (4.7 MiB) TX bytes:6609774 (6.3 MiB) vlan1 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX inet addr:173.183.111.3 Bcast:173.183.111.255 Mask:255.255.224.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:23653 errors:0 dropped:0 overruns:0 frame:0 TX packets:23012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5522012 (5.2 MiB) TX bytes:4982944 (4.7 MiB) wds0.4915 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wds0.4915 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@OpenWrt:~# cat /etc/ppp/ip-up iptables -A FORWARD -t filter -i br0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -t filter -i ppp0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -s 192.168.1.1/24 -d 0/0 -j MASQUERADE iptables -A forwarding_rule -o ppp0 -j ACCEPT iptables -A forwarding_rule -i ppp0 -j ACCEPT iptables -t nat -A postrouting_rule -o ppp0 -j MASQUERADE root@OpenWrt:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.16.20.1 * 255.255.255.255 UH 0 0 0 ppp0 208.85.40.20 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 173.183.192.0 * 255.255.224.0 U 0 0 0 vlan1 default d173-183-192-1. 0.0.0.0 UG 0 0 0 vlan1 default 192.168.1.1 0.0.0.0 UG 0 0 0 br0 Any advice is greatly appreciated, I'm not too great with network but am pretty astute at learning ;-)

    Read the article

  • How can I control which IP address IIS7 uses?

    - by brennanwstehling
    In Win2k3 I used httpcfg to tell IIS to listen to specific IP addresses on the server. I want to run Apache with VisualSVN Server on port 80 on another IP address but IIS7 binds to all ports by default. What utility for IIS7 controls the IIS7 bindings? Update: I found the answer. There is a utility called netsh. netsh http add iplisten ipaddress=xxx.xxx.xxx.xxx By default there are not IP addresses on the list so IIS7 will bind to all IP addressed. If you add one IP to the list it will listen to just that IP or any IP added to the list. It is necessary to restart IIS7 for the change to take affect.

    Read the article

  • Static DHCP!?

    - by voyager
    I've found some home wireless routers/ADSL+ modems (ZyXEL 660) talking about Static DHCP, when refering to assosiating a specific MAC to an IP, but still serve the configuration over DHCP. Doesn't this have another name? What does Cisco call this feature (that I know supports because I've used long time ago)?

    Read the article

  • Set up DNS or F5 VIP to send traffic to a specific port

    - by Sam
    I have a clustered SQL instance set up at SERVER01\dev08 It's assigned to a static port of 1466. Can I set up something which will let users connect to SERVER01 and hit that port? If this is possible, what problems might it create (all traffic coming to this name hitting only one port)? It seems that DNS has nothing to do with ports - nor does the F5 big IP.

    Read the article

  • network endpoint accessible via hostname only, not address?

    - by Dustin Getz
    someone told me that this piece of network hardware (NAS) has a security setting such that it can only be accessed by hostname, not by IP address. I don't understand, as I thought DNS resolved the hostname to an address on the connecting client's side, then at protocol level always used the raw address, so how can this 'security' measure be possible?

    Read the article

  • Is it possible to configure a CDN so that it will step out of the way for a subset of regional IPs?

    - by rwired
    We have a website which targets customers in China, both expat and local Chinese. We have an ICP license which allows us to host in a datacenter inside China. Internet in China is actually as fast as anywhere else (faster than most places actually), so long as the content is served-up within the boundaries of the Great-Firewall. Anything that crosses the wall is horribly slow. The problem is that most expats have some sort of VPN installed so that they can access all the blocked stuff. What this means is that when they access our site, the traffic first has to go out of China through the firewall to their VPN, and then back in. The performance is terrible, worse than if we were just hosting outside of China directly (which we used to do before the ICP was issued). So I want to use a global CDN to mirror the site automatically, but I only want to deliver the content via the CDN if the user's request IP address is outside of China. Inside China I would like the content to be served by our own server. I also want to be careful with the domain names. We currently use www.xxx.com and www.xxx.cn for language selection purposes, as these perform well in SEO on Google (which the expats use), and Baidu (which the locals use). If possible I would like to avoid having one domain on the outside, and the other on the inside since not all expats use a VPN, and some Chinese speakers also use VPNs. Also some of our legitimate customers in both languages are from outside of China. I also don't want to resort to using something like www2.xxx.com/cn for the outside connection if at all possible, since I have worries about duplicate content and canonical URLs ruining our SEO (unless you know of a quick fix for that). CDNs I'm considering are: Google PageSpeed, CloudFlare, Amazon CloudFront. None of which have datacenters inside China. I have complete control of the .com DNS zone records, but the .cn zones are under the control of the domain issuing body in China. I'm not sure at this time if they would allow even a CNAME to point to an IP outside of China (although I don't see why not). They no longer allow outside registrars like they used to.

    Read the article

  • How long are fragmented TCP fragments kept in the TCP server

    - by Justin
    Suppose that a given TCP fragment is fragmented into two IP datagrams, and that the first datagram arrives to the TCP server, but the second datagram never arrives. After a certain amount of time the TCP server sends a keepalive, and determines that the client is alive. What does the TCP server then do with this first datagram? Does is wait for the second datagram to arrive, or does it discard the first datagram?

    Read the article

  • Will my internet address for my internal site cause my traffic to go external?

    - by Toby Allen
    If I have two domains pointing to the same machine, but one resolves to an internal address and the other to my internet facing router, will there be any differnce in route taken to my machine (primarily in terms of performanc). eg. internal.mydomain.com resolves to 192.168.1.200 external.mydomain.com resolves to A.Web.External.IP both eventually resolve back to the same machine. For a client in the network, will using the external address give a performance penalty?

    Read the article

  • Local and public IPs on the same switch?

    - by Andrew
    It's all pretty much in the title. Is it possible to assign both local and public IPs to different nodes connected to the same switch? I have 4 servers with 2 gigabit ethernet ports each. I want one of each to have a public IP, and the remaining ports to have local IPs for server-to-server traffic. Sorry if it's a dumb question. I didn't see anything about it on here already.

    Read the article

  • How to stabilize a disconnecting internet connection?

    - by All
    My internet connection is very interrupting, but it is not sensible for web surfing, as the connection dies for a few seconds and everything is OK. The IP is NOT changing, and just a halt in data transfer. However, it is very annoying for applications needing contact connection like SSH. Since it seems disconnection, SSH closes. Is there any way to stabilize this kind of interrupting connection to keep the connection with zero transfer data to persevere any connection like SSH? I am using Linux (Debian/Ubuntu).

    Read the article

  • HP LaserJet 4250 Printer Networking Problems

    - by MHrappstead
    We've been trying to assign a static IP address to an HP LaserJet 4250 Printer. When we click on the networking tab it asks for a username and password, however it says the admin user is Unauthorized. We've tried IE 8, Firefox, and Chrome and have even updated the firmware to the latest version.

    Read the article

  • Why are all google website suddenly giving untrusted certificate warnings in my Firefox v10?

    - by WilliamKF
    Today, I am suddenly getting the untrusted website error for all Google websites, but not for any other. Internet Explorer gives no such error. Reboot of this Windows 7 computer does not help. Is this some kind of virus infection that is hijacking DNS resolution away from Google to some spoofer? How can I resolve this issue and get Google websites working again normally? If I manually enter a Google IP Address, the page loads correctly.

    Read the article

  • ASA 5540 v8.4(3) vpn to ASA 5505 v8.2(5), tunnel up but I cant ping from 5505 to IP on other side

    - by user223833
    I am having problems pinging from a 5505(remote) to IP 10.160.70.10 in the network behind the 5540(HQ side). 5505 inside IP: 10.56.0.1 Out: 71.43.109.226 5540 Inside: 10.1.0.8 out: 64.129.214.27 I Can ping from 5540 to 5505 inside 10.56.0.1. I also ran ASDM packet tracer in both directions, it is ok from 5540 to 5505, but drops the packet from 5505 to 5540. It gets through the ACL and dies at the NAT. Here is the 5505 config, I am sure it is something simple I am missing. ASA Version 8.2(5) ! hostname ASA-CITYSOUTHDEPOT domain-name rngint.net names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 10.56.0.1 255.255.0.0 ! interface Vlan2 nameif outside security-level 0 ip address 71.43.109.226 255.255.255.252 ! banner motd ***ASA-CITYSOUTHDEPOT*** banner asdm CITY SOUTH DEPOT ASA5505 ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name rngint.net access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.1.0.125 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.160.70.10 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 host 10.1.0.125 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 10.106.70.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 25000 logging buffered informational logging asdm warnings mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 71.43.109.225 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ (inside) host 10.106.70.36 key ***** aaa authentication http console LOCAL aaa authentication ssh console LOCAL aaa authorization exec authentication-server http server enable http 192.168.1.0 255.255.255.0 inside http 10.0.0.0 255.0.0.0 inside http 0.0.0.0 0.0.0.0 outside snmp-server host inside 10.106.70.7 community ***** no snmp-server location no snmp-server contact snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs group1 crypto map outside_map 1 set peer 64.129.214.27 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh 10.0.0.0 255.0.0.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 management-access inside dhcpd auto_config outside ! dhcpd address 10.56.0.100-10.56.0.121 inside dhcpd dns 10.1.0.125 interface inside dhcpd auto_config outside interface inside ! dhcprelay server 10.1.0.125 outside dhcprelay enable inside dhcprelay setroute inside dhcprelay timeout 60 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept tftp-server inside 10.1.1.25 CITYSOUTHDEPOT-ASA-Confg webvpn tunnel-group 64.129.214.27 type ipsec-l2l tunnel-group 64.129.214.27 ipsec-attributes pre-shared-key ***** ! ! prompt hostname context

    Read the article

  • Number of subnets for specific mask

    - by kutacz
    Question source Problem: Your company has been assigned the following IP address: 192.112.136.0 /27 Your group has been assigned the fourth subnet. Question 5: How many useable subnets are available for assignment? Why the answer is 6? I would shoot it's 8 , because 255/32 = 8. More generally - what is an correct algorithm to compute the number of available subnetworks for the same mask?

    Read the article

  • Postgres - could not create any TCP/IP sockets

    - by Jacka
    I'm running a rails app in development with postgresql 9.3. When I tried to start passenger server today, I got: PG::ConnectionBad - could not connect to server: Connection refused Is the server running on host "localhost" (217.74.65.145) and accepting TCP/IP connections on port 5432? No big deal I thought, that happened before. Restarting postgres always solved the problem. So I ran sudo service postgresql restart and got: * Restarting PostgreSQL 9.3 database server * The PostgreSQL server failed to start. Please check the log output: 2014-06-11 10:32:41 CEST LOG: could not bind IPv4 socket: Cannot assign requested address 2014-06-11 10:32:41 CEST HINT: Is another postmaster already running on port 5432? If not, wait a few seconds and retry. 2014-06-11 10:32:41 CEST WARNING: could not create listen socket for "localhost" 2014-06-11 10:32:41 CEST FATAL: could not create any TCP/IP sockets ...fail! My postgresql.conf points to the defaults: localhost and port 5432. I tried changing the port but the error message is the same (except the port change). Both ps aux | grep postgresql and ps aux | grep postmaster return nothing. EDIT: In postgresql.conf I changed listen_addresses to 127.0.0.1 instead of localhost and it did the trick, server restarted. I also had to edit my applications' db config and point to 127.0.0.1 instead of localhost. However, the question is now, why is localhost considered to be 217.74.65.145 and not 127.0.0.1? That's my /etc/hosts: 127.0.0.1 local 127.0.1.1 jacek-X501A1 127.0.0.1 something.name.non.example.com 127.0.0.1 company.something.name.non.example.com

    Read the article

  • Bind ADFS 2.0 service to a specific IP address

    - by ccellar
    I have one server with ADFS-2.0 and a few websites on it. One of the websites is Dynamics CRM which listens on a specific IP address on port 443. Dynamics CRM provides a metadata file for configuration purposes which could be used to configure a relaying party trust with ADFS. It is accessible with the URL https://auth.contoso.com/FederationMetadata/2007-06/federationmetadata.xml The problem is that ADFS-2.0 installs a service which registers following urlacl https://+:443/FederationMetadata/2007-06/ This means the result of accessing the URL https://auth.contoso.com/FederationMetadata/2007-06/federationmetadata.xml is the metadata file of ADFS, not the one of Dynamics CRM. I've tried to delete the default urlacl and added (one of them at a time) https://192.168.1.2:443/FederationMetadata/2007-06/ https://adfs.mydomain.com:443/FederationMetadata/2007-06/ but neither of them worked. Instead the ADFS-service failed to startup complete. Is there any way to bind this service to a IP address? At the moment I see only two alternatives Bind the service to a non standard port. This leads to problems because this means that also the ADFS website has to use a non-standard HTTPS-port. Install ADFS-2.0 on a different server (this is my favorite alternative - however it is not possible in every situation...)

    Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >