Search Results

Search found 8875 results on 355 pages for 'live broadcast'.

Page 68/355 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

  • Is it possible to setup a DHCP server only for local virtual machines?

    - by thiesdiggity
    I have a quick question. I have a bunch of virtual machines (VMWare Workstation) running on an Ubuntu server and have found that VMWare NAT (DHCP) service is unreliable and slow. I have to use NAT instead of bridging because the server is in a data-center that does not have DHCP and I don't have enough static IP's for all the VMs. Is it possible to setup the host (Ubuntu) to be a DHCP server but only for the local virtual machines? The server has 2 network interfaces, so I'd set eth0 to be a static IP, which connects to the outside world, and eth1 to listen for DHCP. Now, I am thinking if I don't want DHCP to broadcast I would just not connect a cable to eth1 and setup the VM's to use bridging on eth1. That way DHCP would not broadcast through my network but be listening on that interface. Would that setup work?

    Read the article

  • How an offline main domain can influence traffic on an active sub domain

    - by danie7L T
    The website(s) design is for a company active in 3 different areas. As an example lets use the following structure: www.example.com [sub1.example.com] [sub2.example.com] [sub3.example.com] sub2.example.com and sub3.example.com are ready to go live but www.example.com really isn't and send a 503 http error code. I would like to know if this situation will affect the traffic and ranking of the subdomains ready to go live? Is it preferable to wait and go live with the main domain? Or there is nothing to "fear" and one doesn't affect the other? Thank you

    Read the article

  • Ubuntu for Internet radio

    - by user93100
    I am planning to set up a streaming server purely for internet radio using Icecast2. what software packages do i require during Ubuntu installation and any third party apps i may require. I am going to use BUTT(Broadcast using this tool) Encoder and would like to be able to run BUTT on any computer so that other people can broadcast to my server from anywhere. I am looking for tips or tutorials on how to achieve the above. I mainly need info on cofiguring Ubuntu Server and icecast2. Also GUI? if so what one. Preferablly lightweight. I am choosing Ubuntu for its level of security and reliability. I hope someone can help me as i plan to make this a community Radio station. Many Thanks Khz

    Read the article

  • Your favorite LiveCD

    - by sova
    Perhaps this is a question better suited for linux.se but since I have servers on all environments I was wondering what your favorite LiveCD is. Wiki defines this, for those unfamiliar, as a CD or DVD containing a bootable computer operating system. Live CDs are unique in that they have the ability to run a complete, modern operating system on a computer lacking mutable secondary storage, such as a hard disk drive. Live USB flash drives are similar to live CDs, but often have the added functionality of automatically and transparently writing changes back to their bootable medium. I tend to stick with Knoppix, and today I have to register the machine on the network before I can get any of my utilities running via IP. Any suggestions?

    Read the article

  • why is my intent not useful?

    - by user1634887
    This is my first to ask here. I write the code for a Broadcast A start another Broadcast B. But the Broadcast B didn't get the intent's value. Broadcast A:get the sms contain message and start B public void onReceive(Context context, Intent intent) { Object[] pdus=(Object[])intent.getExtras().get("pdus"); for(Object pdu:pdus) { byte[] date=(byte[])pdu; SmsMessage message=SmsMessage.createFromPdu(date); String sender=message.getOriginatingAddress(); String body=message.getMessageBody(); if(sender.equals(AppUtil.herPhone)&&body.regionMatches(0, AppUtil.herSmsText, 0, 18)) { Toast.makeText(context, body, Toast.LENGTH_LONG).show(); String [] bodyArray=body.split(" "); String longitude=bodyArray[1]; String latitude=bodyArray[2]; **Intent uiIntent=new Intent(); Bundle bundle=new Bundle(); bundle.putString("longitude", longitude); bundle.putString("latitude", latitude); uiIntent.putExtras(bundle); uiIntent.setAction("android.janmac.location"); context.sendBroadcast(uiIntent);** abortBroadcast(); } } } Boardcast B: it nest in an Activity. register: button.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { AppUtil.SendMessage(MainActivity.this); uiReceiver=new UIReceiver(); IntentFilter filter=new IntentFilter(); filter.addAction("android.janmac.location"); registerReceiver(uiReceiver, filter); } }); extend: private class UIReceiver extends BroadcastReceiver { @Override public void onReceive(Context context, Intent intent) { Log.v("location","uireceiver????!"); **Bundle bundle=new Bundle(); bundle=intent.getExtras(); herLongitude=Double.valueOf(bundle.getString("longitude")); herLatitude=Double.valueOf(bundle.getString("latitude"));** } } but the bundle couldn't get any values. here is log: 08-30 11:17:40.494: D/AndroidRuntime(2359): Shutting down VM 08-30 11:17:40.514: W/dalvikvm(2359): threadid=1: thread exiting with uncaught exception (group=0x40018560) 08-30 11:17:40.544: E/AndroidRuntime(2359): FATAL EXCEPTION: main 08-30 11:17:40.544: E/AndroidRuntime(2359): java.lang.RuntimeException: Error receiving broadcast Intent { act=android.janmac.location (has extras) } in com.example.locationclient.MainActivity$UIReceiver@40513690 08-30 11:17:40.544: E/AndroidRuntime(2359): at android.app.LoadedApk$ReceiverDispatcher$Args.run(LoadedApk.java:722) 08-30 11:17:40.544: E/AndroidRuntime(2359): at android.os.Handler.handleCallback(Handler.java:587) 08-30 11:17:40.544: E/AndroidRuntime(2359): at android.os.Handler.dispatchMessage(Handler.java:92) 08-30 11:17:40.544: E/AndroidRuntime(2359): at android.os.Looper.loop(Looper.java:130) 08-30 11:17:40.544: E/AndroidRuntime(2359): at android.app.ActivityThread.main(ActivityThread.java:3835) 08-30 11:17:40.544: E/AndroidRuntime(2359): at java.lang.reflect.Method.invokeNative(Native Method) 08-30 11:17:40.544: E/AndroidRuntime(2359): at java.lang.reflect.Method.invoke(Method.java:507) 08-30 11:17:40.544: E/AndroidRuntime(2359): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:864) 08-30 11:17:40.544: E/AndroidRuntime(2359): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:622) 08-30 11:17:40.544: E/AndroidRuntime(2359): at dalvik.system.NativeStart.main(Native Method) 08-30 11:17:40.544: E/AndroidRuntime(2359): Caused by: java.lang.NumberFormatException 08-30 11:17:40.544: E/AndroidRuntime(2359): at org.apache.harmony.luni.util.FloatingPointParser.parseDblImpl(Native Method) 08-30 11:17:40.544: E/AndroidRuntime(2359): at org.apache.harmony.luni.util.FloatingPointParser.parseDouble(FloatingPointParser.java:283) 08-30 11:17:40.544: E/AndroidRuntime(2359): at java.lang.Double.parseDouble(Double.java:318) 08-30 11:17:40.544: E/AndroidRuntime(2359): at java.lang.Double.valueOf(Double.java:356) 08-30 11:17:40.544: E/AndroidRuntime(2359): at com.example.locationclient.MainActivity$UIReceiver.onReceive(MainActivity.java:231) 08-30 11:17:40.544: E/AndroidRuntime(2359): at android.app.LoadedApk$ReceiverDispatcher$Args.run(LoadedApk.java:709) 08-30 11:17:40.544: E/AndroidRuntime(2359): ... 9 more enter code here

    Read the article

  • The Windows Store... why did I sign up with this mess again?

    - by FransBouma
    Yesterday, Microsoft revealed that the Windows Store is now open to all developers in a wide range of countries and locations. For the people who think "wtf is the 'Windows Store'?", it's the central place where Windows 8 users will be able to find, download and purchase applications (or as we now have to say to not look like a computer illiterate: <accent style="Kentucky">aaaaappss</accent>) for Windows 8. As this is the store which is integrated into Windows 8, it's an interesting place for ISVs, as potential customers might very well look there first. This of course isn't true for all kinds of software, and developer tools in general aren't the kind of applications most users will download from the Windows store, but a presence there can't hurt. Now, this Windows Store hosts two kinds of applications: 'Metro-style' applications and 'Desktop' applications. The 'Metro-style' applications are applications created for the new 'Metro' UI which is present on Windows 8 desktop and Windows RT (the single color/big font fingerpaint-oriented UI). 'Desktop' applications are the applications we all run and use on Windows today. Our software are desktop applications. The Windows Store hosts all Metro-style applications locally in the store and handles the payment for these applications. This means you upload your application (sorry, 'app') to the store, jump through a lot of hoops, Microsoft verifies that your application is not violating a tremendous long list of rules and after everything is OK, it's published and hopefully you get customers and thus earn money. Money which Microsoft will pay you on a regular basis after customers buy your application. Desktop applications are not following this path however. Desktop applications aren't hosted by the Windows Store. Instead, the Windows Store more or less hosts a page with the application's information and where to get the goods. I.o.w.: it's nothing more than a product's Facebook page. Microsoft will simply redirect a visitor of the Windows Store to your website and the visitor will then use your site's system to purchase and download the application. This last bit of information is very important. So, this morning I started with fresh energy to register our company 'Solutions Design bv' at the Windows Store and our two applications, LLBLGen Pro and ORM Profiler. First I went to the Windows Store dashboard page. If you don't have an account, you have to log in or sign up if you don't have a live account. I signed in with my live account. After that, it greeted me with a page where I had to fill in a code which was mailed to me. My local mail server polls every several minutes for email so I had to kick it to get it immediately. I grabbed the code from the email and I was presented with a multi-step process to register myself as a company or as an individual. In red I was warned that this choice was permanent and not changeable. I chuckled: Microsoft apparently stores its data on paper, not in digital form. I chose 'company' and was presented with a lengthy form to fill out. On the form there were two strange remarks: Per company there can just be 1 (one, uno, not zero, not two or more) registered developer, and only that developer is able to upload stuff to the store. I have no idea how this works with large companies, oh the overhead nightmares... "Sorry, but John, our registered developer with the Windows Store is on holiday for 3 months, backpacking through Australia, no, he's not reachable at this point. M'yeah, sorry bud. Hey, did you fill in those TPS reports yesterday?" A separate Approver has to be specified, which has to be a different person than the registered developer. Apparently to Microsoft a company with just 1 person is not a company. Luckily we're with two people! *pfew*, dodged that one, otherwise I would be stuck forever: the choice I already made was not reversible! After I had filled out the form and it was all well and good and accepted by the Microsoft lackey who had to write it all down in some paper notebook ("Hey, be warned! It's a permanent choice! Written down in ink, can't be changed!"), I was presented with the question how I wanted to pay for all this. "Pay for what?" I wondered. Must be the paper they were scribbling the information on, I concluded. After all, there's a financial crisis going on! How could I forget! Silly me. "Ok fair enough". The price was 75 Euros, not the end of the world. I could only pay by credit card, so it was accepted quickly. Or so I thought. You see, Microsoft has a different idea about CC payments. In the normal world, you type in your CC number, some date, a name and a security code and that's it. But Microsoft wants to verify this even more. They want to make a verification purchase of a very small amount and are doing that with a special code in the description. You then have to type in that code in a special form in the Windows Store dashboard and after that you're verified. Of course they'll refund the small amount they pull from your card. Sounds simple, right? Well... no. The problem starts with the fact that I can't see the CC activity on some website: I have a bank issued CC card. I get the CC activity once a month on a piece of paper sent to me. The bank's online website doesn't show them. So it's possible I have to wait for this code till October 12th. One month. "So what, I'm not going to use it anyway, Desktop applications don't use the payment system", I thought. "Haha, you're so naive, dear developer!" Microsoft won't allow you to publish any applications till this verification is done. So no application publishing for a month. Wouldn't it be nice if things were, you know, digital, so things got done instantly? But of course, that lackey who scribbled everything in the Big Windows Store Registration Book isn't that quick. Can't blame him though. He's just doing his job. Now, after the payment was done, I was presented with a page which tells me Microsoft is going to use a third party company called 'Symantec', which will verify my identity again. The page explains to me that this could be done through email or phone and that they'll contact the Approver to verify my identity. "Phone?", I thought... that's a little drastic for a developer account to publish a single page of information about an external hosted software product, isn't it? On Facebook I just added a page, done. And paying you, Microsoft, took less information: you were happy to take my money before my identity was even 'verified' by this 3rd party's minions! "Double standards!", I roared. No-one cared. But it's the thought of getting it off your chest, you know. Luckily for me, everyone at Symantec was asleep when I was registering so they went for the fallback option in case phone calls were not possible: my Approver received an email. Imagine you have to explain the idiot web of security theater I was caught in to someone else who then has to reply a random person over the internet that I indeed was who I said I was. As she's a true sweetheart, she gave me the benefit of the doubt and assured that for now, I was who I said I was. Remember, this is for a desktop application, which is only a link to a website, some pictures and a piece of text. No file hosting, no payment processing, nothing, just a single page. Yeah, I also thought I was crazy. But we're not at the end of this quest yet. I clicked around in the confusing menus of the Windows Store dashboard and found the 'Desktop' section. I get a helpful screen with a warning in red that it can't find any certified 'apps'. True, I'm just getting started, buddy. I see a link: "Check the Windows apps you submitted for certification". Well, I haven't submitted anything, but let's see where it brings me. Oh the thrill of adventure! I click the link and I end up on this site: the hardware/desktop dashboard account registration. "Erm... but I just registered...", I mumbled to no-one in particular. Apparently for desktop registration / verification I have to register again, it tells me. But not only that, the desktop application has to be signed with a certificate. And not just some random el-cheapo certificate you can get at any mall's discount store. No, this certificate is special. It's precious. This certificate, the 'Microsoft Authenticode' Digital Certificate, is the only certificate that's acceptable, and jolly, it can be purchased from VeriSign for the price of only ... $99.-, but be quick, because this is a limited time offer! After that it's, I kid you not, $499.-. 500 dollars for a certificate to sign an executable. But, I do feel special, I got a special price. Only for me! I'm glowing. Not for long though. Here I started to wonder, what the benefit of it all was. I now again had to pay money for a shiny certificate which will add 'Solutions Design bv' to our installer as the publisher instead of 'unknown', while our customers download the file from our website. Not only that, but this was all about a Desktop application, which wasn't hosted by Microsoft. They only link to it. And make no mistake. These prices aren't single payments. Every year these have to be renewed. Like a membership of an exclusive club: you're special and privileged, but only if you cough up the dough. To give you an example how silly this all is: I added LLBLGen Pro and ORM Profiler to the Visual Studio Gallery some time ago. It's the same thing: it's a central place where one can find software which adds to / extends / works with Visual Studio. I could simply create the pages, add the information and they show up inside Visual Studio. No files are hosted at Microsoft, they're downloaded from our website. Exactly the same system. As I have to wait for the CC transcripts to arrive anyway, I can't proceed with publishing in this new shiny store. After the verification is complete I have to wait for verification of my software by Microsoft. Even Desktop applications need to be verified using a long list of rules which are mainly focused on Metro-style applications. Even while they're not hosted by Microsoft. I wonder what they'll find. "Your application wasn't approved. It violates rule 14 X sub D: it provides more value than our own competing framework". While I was writing this post, I tried to check something in the Windows Store Dashboard, to see whether I remembered it correctly. I was presented again with the question, after logging in with my live account, to enter the code that was just mailed to me. Not the previous code, a brand new one. Again I had to kick my mail server to pull the email to proceed. This was it. This 'experience' is so beyond miserable, I'm afraid I have to say goodbye for now to the 'Windows Store'. It's simply not worth my time. Now, about live accounts. You might know this: live accounts are tied to everything you do with Microsoft. So if you have an MSDN subscription, e.g. the one which costs over $5000.-, it's tied to this same live account. But the fun thing is, you can login with your live account to the MSDN subscriptions with just the account id and password. No additional code is mailed to you. While it gives you access to all Microsoft software available, including your licenses. Why the draconian security theater with this Windows Store, while all I want is to publish some desktop applications while on other Microsoft sites it's OK to simply sign in with your live account: no codes needed, no verification and no certificates? Microsoft, one thing you need with this store and that's: apps. Apps, apps, apps, apps, aaaaaaaaapps. Sorry, my bad, got carried away. I just can't stand the word 'app'. This store's shelves have to be filled to the brim with goods. But instead of being welcomed into the store with open arms, I have to fight an uphill battle with an endless list of rules and bullshit to earn the privilege to publish in this shiny store. As if I have to be thrilled to be one of the exclusive club called 'Windows Store Publishers'. As if Microsoft doesn't want it to succeed. Craig Stuntz sent me a link to an old blog post of his regarding code signing and uploading to Microsoft's old mobile store from back in the WinMo5 days: http://blogs.teamb.com/craigstuntz/2006/10/11/28357/. Good read and good background info about how little things changed over the years. I hope this helps Microsoft make things more clearer and smoother and also helps ISVs with their decision whether to go with the Windows Store scheme or ignore it. For now, I don't see the advantage of publishing there, especially not with the nonsense rules Microsoft cooked up. Perhaps it changes in the future, who knows.

    Read the article

  • Configuring VirtualBox host only networking: OSX host, Ubuntu guest

    - by Greg K
    I have a Ubuntu guest configured with two interfaces, eth0 is using NAT and works fine, I can access the net. The second interface eth1 is set to host only networking and VirtualBox has created a vboxnet0 virtual adapter on the host. I've configured vboxnet0 in VirtualBox adapter settings with the following: ip 192.168.21.20 subnet 255.255.255.0 Once the VM guest is running, ifconfig on OSX has vboxnet0 setup as: vboxnet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 0a:00:27:00:00:00 inet 192.168.21.20 netmask 0xffffff00 broadcast 192.168.21.255 In the guest, eth0 is set to use DHCP, I've statically assigned eth1 to 192.168.21.20 (is this a mistake?): auto eth1 iface eth1 inet static address 192.168.21.20 netmask 255.255.255.0 network 192.168.21.0 broadcast 192.168.21.255 gateway 192.168.21.1 There is no device on 192.168.21.1 - what should I set my gateway to? In the guest the routes look like so: Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.21.0 * 255.255.255.0 U 0 0 0 eth1 10.0.2.0 * 255.255.255.0 U 0 0 0 eth0 default 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 default 192.168.21.1 0.0.0.0 UG 100 0 0 eth1 Route table on OSX: $ netstat -nr Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 10.77.36.1 UGSc 28 0 en1 10.77.36/22 link#5 UCS 5 0 en1 10.77.39.38 127.0.0.1 UHS 1 2236 lo0 10.77.39.255 link#5 UHLWbI 1 66 en1 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 1 8642 lo0 169.254 link#5 UCS 0 0 en1 192.168.21 link#7 UC 2 0 vboxnet 192.168.21.20 a:0:27:0:0:0 UHLWI 0 4 lo0 192.168.21.255 link#7 UHLWbI 2 64 vboxnet I can't SSH from the host to the guest (I used to be able to when the VM was configured with a bridged connection): $ ssh 192.168.21.20 ssh: connect to host 192.168.21.20 port 22: Connection refused What have I done wrong here? TIA

    Read the article

  • Windows Vista DHCP bug, arp authorize, isc dhcp, workaround

    - by jinanwow
    I am trying to find a workaround for the Windows Vista Force Broadcast bug with ISC DHCP and a Cisco Router. The problem is not windows vista trying to obtain an IP address from us that works fine (with or without the flag enabled). THe problem is we are using a cisco router and the command 'arp authorized' to prevent users from using static IP addresses on the network. The problem is, if Windows Vista sets the boot flag to true the command 'arp authorized' will not work, as it looks for the IP address and destination MAC address in the DHCP Offer Packet to add it to its arp table. The machine will DHCP just fine, but since the ARP table is not aware of the machine, it is unable to access the internet. If I disable the broadcast flag in vista, the next time it DHCPs an arp entry gets created since the DHCP Offer is unicast instead of broadcast. The thing is, we can not tell 500 to 1000 people to edit their registry, so we need a workaround for this issue. I have not had much success in finding a workaround. The question is, is there a way to force or trick ISC DHCP into unicasting a responce back to the user. Either on the Cisco Side, ISC DHCP side or intercepting and rewriting the DHCP Discover UDP packet to turn off the flag before it reaches ISC DHCP?

    Read the article

  • virtualisation with kvm: export services from guest to the host

    - by ascobol
    Hello, I would like to export some services from the guest os to the host os, via kvm, and by the same way learn some things about networking. I have tried the following commands: In the host (kubuntu 10.4): $ sudo tunctl -u ascobol Set 'tap0' persistent and owned by uid 2401 $ sudo ifconfig tap0 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255 The ifconfig command returns: $ /sbin/ifconfig tap0 Link encap:Ethernet HWaddr 3e:4e:e3:cc:bc:92 inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::3c4e:e3ff:fecc:bc92/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:17 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 Then I run the virtual machine (ubuntu server 10.4): $ sudo kvm -hda ubuntuserver104.qcow2 -net nic -net tap,name=tap0,script=no (I'm using sudo because without it fails with the following message:) warning: could not configure /dev/net/tun: no virtual network emulation With sudo the virtual machine boots, I just get this message: pci_add_option_rom: failed to find romfile "pxe-rtl8139.bin" In the virtual machine: $ ifconfig eth0 192.168.2.2 netmask 255.255.255.0 broadcast 192.168.2.255 Now if I run: $ ssh 192.168.2.2 I just get a No route to host What is wrong with this setup ? Thanks !

    Read the article

  • Change the order of IP addresses returned by ifconfig?

    - by erikcw
    I have an Ubuntu server with several IP addresses attached to it. 127.0.0.1 is listed as venet0 by ifconfig. I'm using Chef to configure the server. The problem is that chef is listing 127.0.0.1 as the IP address for the server instead of one of the server's "real" IPs. (apparent "ohai ipaddress" uses the first IP listed by ifconfig to determine the server's IP). How can I change the order so the servers main IP is listed first instead of the 127.0.0.1? Can venet0 be deleted and venet0:0 be "promoted" to take its place since 127.0.0.1 is already listed in the "lo" interface? lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16700 (16.7 KB) TX bytes:16700 (16.7 KB) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:7622207 errors:0 dropped:0 overruns:0 frame:0 TX packets:8183436 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2102750761 (2.1 GB) TX bytes:2795213667 (2.7 GB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:XXX.XXX.XXX.XX1 P-t-P:XXX.XXX.XXX.XX1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 venet0:1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:XXX.XXX.XXX.XX2 P-t-P:XXX.XXX.XXX.XX2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 route -n route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.0.2.1 0.0.0.0 255.255.255.255 UH 0 0 0 venet0 0.0.0.0 192.0.2.1 0.0.0.0 UG 0 0 0 venet0

    Read the article

  • Setting up /etc/network/interface file for KVM ubuntu 10.10

    - by Charles Thornton
    I am trying to setup KVM on Unbuntu 10.10 IFCONFIG DUMP: hydra(~}$ifconfig eth0 Link encap:Ethernet HWaddr 00:1b:fc:cb:77:eb inet addr:172.20.20.3 Bcast:172.20.20.255 Mask:255.255.255.0 inet6 addr: fe80::21b:fcff:fecb:77eb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1345 errors:0 dropped:0 overruns:0 frame:0 TX packets:1541 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:820414 (820.4 KB) TX bytes:317708 (317.7 KB) Interrupt:23 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) virbr0 Link encap:Ethernet HWaddr 0a:1e:fb:b4:77:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 inet6 addr: fe80::81e:fbff:feb4:7784/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:56 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:8934 (8.9 KB) hydra(~}$ QUESTION:: How should /etc/network/interfaces be setup?? The following attempt just kills my internet connection! --------- /etc/network/interfaces ------------- # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 172.20.20.3 netmask 255.255.255.0 network 172.20.20.0 broadcast 172.20.20.255 gateway 172.20.20.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off What am I doing wrong????

    Read the article

  • Slow tracepath on local LAN

    - by Simone Falcini
    I am on EXSi and I have 2 instances: Ubuntu and CentOS. These are the network configurations Ubuntu eth0 Link encap:Ethernet HWaddr 00:50:56:00:1f:68 inet addr:212.83.153.71 Bcast:212.83.153.71 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76059 errors:0 dropped:26 overruns:0 frame:0 TX packets:7224 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6482760 (6.4 MB) TX bytes:2080684 (2.0 MB) eth1 Link encap:Ethernet HWaddr 00:0c:29:46:5a:f2 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:252 errors:0 dropped:0 overruns:0 frame:0 TX packets:608 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:42460 (42.4 KB) TX bytes:82474 (82.4 KB) /etc/iptables.conf *nat :PREROUTING ACCEPT [142:12571] :INPUT ACCEPT [5:1076] :OUTPUT ACCEPT [8:496] :POSTROUTING ACCEPT [8:496] -A POSTROUTING -s 192.168.1.0/24 -o eth0 -j MASQUERADE COMMIT *filter :INPUT ACCEPT [2:72] :FORWARD ACCEPT [4:336] :OUTPUT ACCEPT [6:328] -A INPUT -i eth1 -p tcp -j ACCEPT -A INPUT -i eth1 -p udp -j ACCEPT -A INPUT -i eth0 -p tcp --dport ssh -j ACCEPT COMMIT CentOS eth0 Link encap:Ethernet HWaddr 00:0C:29:74:1C:55 inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe74:1c55/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:499 errors:0 dropped:0 overruns:0 frame:0 TX packets:475 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:68326 (66.7 KiB) TX bytes:82641 (80.7 KiB) The main problem is that if i execute this command from the CentOS instance ssh 192.168.1.2 it takes more than 20s to connect. It seems like it's routing the connection to the wrong network. What could it be? Thanks!

    Read the article

  • bond0:0 + define virtual IP

    - by yael
    hi all in my linux server I have the follwoing: Linux Version - RedHat-Linux- 5.3.0.0 (this linux server only only one LAN) more /etc/sysconfig/network-scripts/ifcfg-bond0:0 DEVICE=bond0:0 ONBOOT=yes BOOTPROTO=static IPADDR=10.10.10.12 NETMASK=255.255.255.0 ifconfig -a bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) bond0:0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:10.10.10.12 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr 00:0E:0C:C7:F8:92 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec7:f892/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8600 errors:0 dropped:0 overruns:0 frame:0 TX packets:4764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:717979 (701.1 KiB) TX bytes:598620 (584.5 KiB) Memory:b8820000-b8840000 my problems: why I get HWaddr 00:00:00:00:00:00 and not the real MAC address I cant ping to other server with 10.10.10.11 from my server is it posible to define bond0:0 when I have only one LAN (eth0) other info: more /etc/modprobe.conf alias eth0 e1000e alias eth1 e1000e alias eth2 e1000e alias eth3 e1000e alias scsi_hostadapter mptbase alias scsi_hostadapter1 mptsas alias scsi_hostadapter2 ata_piix alias bond0 bonding alias bond1 bonding

    Read the article

  • bond0:0 + define virtual IP

    - by yael
    hi all in my linux server I have the follwoing: Linux Version - RedHat-Linux- 5.3.0.0 (this linux server only only one LAN) more /etc/sysconfig/network-scripts/ifcfg-bond0:0 DEVICE=bond0:0 ONBOOT=yes BOOTPROTO=static IPADDR=10.10.10.12 NETMASK=255.255.255.0 ifconfig -a bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) bond0:0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:10.10.10.12 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr 00:0E:0C:C7:F8:92 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec7:f892/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8600 errors:0 dropped:0 overruns:0 frame:0 TX packets:4764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:717979 (701.1 KiB) TX bytes:598620 (584.5 KiB) Memory:b8820000-b8840000 my problems: why I get HWaddr 00:00:00:00:00:00 and not the real MAC address I cant ping to other server with 10.10.10.11 from my server is it posible to define bond0:0 when I have only one LAN (eth0) other info: more /etc/modprobe.conf alias eth0 e1000e alias eth1 e1000e alias eth2 e1000e alias eth3 e1000e alias scsi_hostadapter mptbase alias scsi_hostadapter1 mptsas alias scsi_hostadapter2 ata_piix alias bond0 bonding alias bond1 bonding

    Read the article

  • Libvirt/KVM in NAT: can't access from host (and can't forward)

    - by SharkWipf
    I'm trying to set up a port forward to a KVM guest, managed through Libvirt on Debian 6. The VM is running in NAT, through the "default" network. This all runs fine, the VM has full internet connection. However, the host cannot reach the vm internally. Neither ping, nc nor nmap on the NAT network give any signs of the VM. Due to this, the normal iptables forwarding rules don't work either. $ cat /etc/debian_version 6.0.5 $ libvirtd --version libvirtd (libvirt) 0.9.11.3 $ kvm --version QEMU emulator version 1.0 (qemu-kvm-1.0+dfsg-11, Debian), Copyright (c) 2003-2008 Fabrice Bellard ifconfig: eth0 Link encap:Ethernet HWaddr 54:04:a6:f1:6f:10 inet addr:x.x.x.x Bcast:x.x.x.x Mask:255.255.255.x inet6 addr: fe80::5604:a6ff:fef1:6f10/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:118902 errors:0 dropped:0 overruns:0 frame:0 TX packets:142357 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13247173 (12.6 MiB) TX bytes:95163190 (90.7 MiB) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:230646 errors:0 dropped:0 overruns:0 frame:0 TX packets:230646 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204577107 (195.0 MiB) TX bytes:204577107 (195.0 MiB) virbr0 Link encap:Ethernet HWaddr fe:54:00:e2:d2:60 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:961 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:666759 (651.1 KiB) TX bytes:400701 (391.3 KiB) vnet0 Link encap:Ethernet HWaddr fe:54:00:e2:d2:60 inet6 addr: fe80::fc54:ff:fee2:d260/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:125687 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:739803 (722.4 KiB) TX bytes:6886609 (6.5 MiB)

    Read the article

  • Ubuntu IP Configuration - multiple subnets & interfaces

    - by HaydnWVN
    Have a 'new' mailserver running postfix on Ubuntu. We are having some problems configuring the subnets & interfaces. Basically 2 subnets (.253. & .254.) need to be connected through the 3rd subnet (.252.) where the Router is residing. # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.62.254.199 netmask 255.255.0.0 network 10.62.254.0 broadcast 10.62.255.255 #gateway 10.62.252.138 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 10.62.252.138 dns-search ***.com auto eth1 iface eth1 inet static address 10.62.253.199 netmask 255.255.0.0 network 10.62.253.0 broadcast 10.62.255.255 #gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-nameservers 10.62.252.138 dns-search ***.com auto eth2 iface eth2 inet static address 10.62.252.199 netmask 255.255.0.0 network 10.62.252.0 broadcast 10.62.255.255 gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-search ***.com I have an external support company who are looking into this (they built and configured this server), but it's taking far too long... So I'm looking to highlight the mistake!

    Read the article

  • bond0:0 + define virtual IP

    - by yael
    in my Linux server I have the following: Linux Version - RedHat-Linux- 5.3.0.0 (this Linux server only only one LAN) more /etc/sysconfig/network-scripts/ifcfg-bond0:0 DEVICE=bond0:0 ONBOOT=yes BOOTPROTO=static IPADDR=10.10.10.12 NETMASK=255.255.255.0 ifconfig -a bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) bond0:0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:10.10.10.12 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr 00:0E:0C:C7:F8:92 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec7:f892/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8600 errors:0 dropped:0 overruns:0 frame:0 TX packets:4764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:717979 (701.1 KiB) TX bytes:598620 (584.5 KiB) Memory:b8820000-b8840000 my problems: why I get HWaddr 00:00:00:00:00:00 and not the real MAC address I cant ping to other server with 10.10.10.11 from my server is it possible to define bond0:0 when I have only one LAN (eth0) other info: more /etc/modprobe.conf alias eth0 e1000e alias eth1 e1000e alias eth2 e1000e alias eth3 e1000e alias scsi_hostadapter mptbase alias scsi_hostadapter1 mptsas alias scsi_hostadapter2 ata_piix alias bond0 bonding alias bond1 bonding

    Read the article

  • Centos VM serving multiple public IP: how to configure network interface?

    - by Glasnhost
    I have a Centos 5.6 VM (Vsphere client) already responding to two different public IPs on eth0 and eth0:1 and I'm trying to add eth0:2. I copied the eth0 config file and restarted the network service. I don't understand which other steps are needed... ifconfig eth0 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.10 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:163371837 errors:77 dropped:0 overruns:0 frame:0 TX packets:168210961 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1891221045 (1.7 GiB) TX bytes:855899500 (816.2 MiB) Interrupt:59 Base address:0x2000 eth0:1 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.11 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:59 Base address:0x2000 eth0:2 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.12 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:59 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:188976973 errors:0 dropped:0 overruns:0 frame:0 TX packets:188976973 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2015642664 (1.8 GiB) TX bytes:2015642664 (1.8 GiB) more /etc/resolv.conf nameserver 10.1.12.1 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.1.12.1 0.0.0.0 UG 0 0 0 eth0

    Read the article

  • Linux: Three default gateways?

    - by Daniel
    My server has three default gateways, how can that be? Shouldn't there be one default gw? I have three NICs, each attached to a separate subnet: server1:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.5.0.0 * 255.255.255.224 U 0 0 0 eth3 localnet * 255.255.255.224 U 0 0 0 eth0 192.168.8.0 * 255.255.255.192 U 0 0 0 eth1 default 10.5.0.1 0.0.0.0 UG 0 0 0 eth3 default 192.168.8.1 0.0.0.0 UG 0 0 0 eth1 default 10.1.0.1 0.0.0.0 UG 0 0 0 eth0 Sometimes, I can't ping a host on the Internet, sometimes I can. What I want is traffic to the Internet (0.0.0.0) routed through a specific NIC. Can I just add a route for 0.0.0.0 and default gw to one of the eth0-3 interfaces? Will it break my connection? I'm using Debian, here is my /etc/network/interfaces: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 10.1.0.4 netmask 255.255.255.224 network 10.1.0.0 broadcast 10.1.0.31 gateway 10.1.0.1 allow-hotplug eth1 iface eth1 inet static address 192.168.8.4 netmask 255.255.255.192 network 192.168.8.0 broadcast 192.168.8.63 gateway 192.168.8.1 allow-hotplug eth3 iface eth3 inet static address 10.5.0.4 netmask 255.255.255.224 network 10.5.0.0 broadcast 10.5.0.31 gateway 10.5.0.1

    Read the article

  • Application Demos in UPK

    - by [email protected]
    Over the years, User Productivity Kit has expanded to include solutions to many project challenges. As of UPK 3.6.1, solutions are provided for pre and post application go-live learning, application testing, system documentation, presentation output, and more. New in UPK 3.6.1 are additional features that can be used effectively for application demo purposes. This can come in handy when you need to do a demo but don't want to show or can't show the live application. Maybe you're doing a presentation for a group of project stakeholders and want to focus on the business workflow implemented by the application rather than the mechanics of using it. Or possibly, you need to show the application but you're disconnected from any network preventing you from running the live application. In any of these cases, a presentation aid that represents the live application is what's needed. Previous versions of the UPK topic player would allow you to do this but would always show those UPK user interface elements that help a user learn the application. When you're presenting the narrative live, the UPK bubbles can be a distraction. UPK 3.6.1 provides some new features that allow you to control whether the bubbles display. There are two ways to hide bubbles in a topic. The first is a topic property that allows you to control bubbles across the entire topic. There are 3 settings for the Show Bubbles topic property. The default setting is Use frame settings which allows you to control whether bubbles display on a frame by frame basis. When you choose Always, the bubbles will always display regardless of the frame setting. The final choice is Never. Choosing Never will hide every bubble in your topic with one setting change. As with Always, choosing Never will ignore the frame setting. The second way to control the bubbles is at the frame level. First ensure that the topic's Show Bubbles property is set to Use frame settings. Navigate to the frame on which you want to turn off the bubble and click the Display bubble for this frame button to turn off the bubble. When you play the topic, the bubble will no longer be displayed. Depending on your needs, you might also use another longstanding UPK feature that allows you to control whether the action area displays on a frame. Just click the Action area on/off button to toggle its display. I've found the frame properties to be useful beyond creating presentation aids. When creating "See It!" only topics for more advanced users, I may hide the bubbles on some of the more straightforward frames. For example, if I have a form where one needs to fill out an address, I may display the first bubble in the sequence and explain what the subsequent steps are doing. I then hide bubbles on the remaining frames which are the more mechanical steps of entering the address. We'd like to hear your thoughts on this new UPK feature. Use the comments below to tell us how you've used it. John Zaums Senior Director, Product Development Oracle User Productivity Kit

    Read the article

  • Some thoughts on email hosting for one’s own domain

    - by jamiet
    I have used the same email providers for my own domains for a few years now however I am considering moving over to a new provider. In this email I’ll share my current thoughts and hopefully I’ll get some feedback that might help me to decide on what to do next. What I use today I have three email addresses that I use primarily (I have changed the domains in this blog post as I don’t want to give them away to spammers): [email protected] – My personal account that I give out to family and friends and which I use to register on websites [email protected]  - An account that I use to catch email from the numerous mailing lists that I am on [email protected] – I am a self-employed consultant so this is an account that I hand out to my clients, my accountant, and other work-related organisations Those two domains (jtpersonaldomain.com & jtworkdomain.com) are both managed at http://domains.live.com which is a fantastic service provided by Microsoft that for some perplexing reason they never bother telling anyone about. It offers multiple accounts (I have seven at jtpersonaldomain.com though as already stated I only use two of them) which are accessed via Outlook.com (formerly Hotmail.com) along with usage reporting plus a few other odds and sods that I never use. Best of all though, its totally free. In addition, given that I have got both domains hosted using http://domains.live.com I can link my various accounts together and switch between them at Outlook.com without having to login and logout: N.B. You’ll notice that there are two other accounts listed there in addition to the three I already mentioned. One is my mum’s account which helps me provide IT support/spam filtering services to her and the other is the donation account for AdventureWorks on Azure. I find that linking feature to be very handy indeed. Finally, http://domains.live.com is the epitome of “it just works”. I set up jtworkdomain.com at http://domains.live.com over three years ago and I am pretty certain I haven’t been back there even once to administer it. Proposed changes OK, so if I like http://domains.live.com so much why am I considering changing? Well, I earn my corn in the Microsoft ecosystem and if I’m reading the tea-leaves correctly its looking increasingly likely that the services that I’m going to have to be familiar with in the future are all going to be running on top of and alongside Windows Azure Active Directory and Office 365 respectively. Its clear to me that Microsoft’s are pushing their customers toward cloud services and, like it or lump it, data integration developers like me may have to come along for the ride. I don’t think the day is too far off when we can log into Windows Azure SQL Database (aka SQL Azure), Team Foundation Service, Dynamics etc… using the same credentials that are currently used for Office 365 and over time I would expect those things to get integrated together a lot better – that integration will be based upon a Windows Azure Active Directory identity. This should not come as a surprise, in my opinion Microsoft’s whole enterprise play over the past 15 or 20 years can be neatly surmised as “get people onto Windows Server and Active Directory then upsell from there” – in the not-too-distant-future the only difference is that they’re trying to do it in the cloud. I want to get familiar with these services and hence I am considering moving jtworkdomain.com onto Office 365. I’ll lose the convenience of easily being able to switch to that account at Outlook.com and moreover I’ll have to start paying for it (I think it’ll be about fifty quid a year – not a massive amount but its quite a bit more than free) but increasingly this is beginning to look like a move I have to make. So that’s where my head is at right now. Anyone have any relevant thoughts or experiences to share? Please let me know in the comments below. @Jamiet

    Read the article

  • Can't boot in Ubuntu after windows upgrade

    - by VanceAnce
    After my lastest update for Ubuntu and Windows XP, I got a Grub error on booting the next day. ls lists the following (without () ): sd0 sd1, msdos sd2 sd5 sd6 When I tried to get into one with (sd0,xy)/ it doesn't detect system or unknown file system error. I tried to boot to a live session with a Knoppix live CD and found out that all data exists. I also tried to recover with TestDisk and it finds all systems. Here is the test disk result: Start End Size in sectors 1 * HPFS - NTFS 0 1 1 7079 254 63 113740137 2 E extended LBA 7080 0 1 12161 254 63 81642330 5 L HPFS - NTFS 7080 1 1 10266 254 63 51199092 [Schule] X extended 12031 30 1 12161 254 63 2102625 6 L Linux Swap 12031 31 33 12161 254 63 2102530 I've 1 winxp-home, 1x Ubuntu (ext3+swap) and 1 winxp prof and then I wrote on mbr with TestDisk but I always get the same errors with Grub. What should I do? I need both XP and Ubuntu. Help me please. more infos in answers below - sry for thos confusing style but im working on diff live system and browsers and have to reboot always the boot info script output is also down below maybe an advanced user can correct my fail posting - after i can solve my issuse i will register here thanx and pls help me with those weired issues ! as i still cant just comment my own answer or those on top i again has to put it here as a sepperate answer..... (or even edit - maybe an browser failur using the live cds ... cause this posti can edit) here the bootinfo script output - but the result is the same as with TestDisk ... but it looks worse - cause it also doesnt detect my old ubuntu ... but there wasnt a eares process or overwrite process visibile ending the last working session output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== = Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda. sda1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /ntldr /NTDETECT.COM sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 63. Operating System: Windows XP Boot files: sda6: __________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 100.0 GB, 100030242816 bytes 255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 113,740,199 113,740,137 7 NTFS / exFAT / HPFS /dev/sda2 113,740,200 195,382,529 81,642,330 f W95 Extended (LBA) /dev/sda5 113,740,263 164,939,354 51,199,092 7 NTFS / exFAT / HPFS /dev/sda6 193,280,000 195,382,529 2,102,530 82 Linux swap / Solaris /dev/sda2 ends after the last sector of /dev/sda /dev/sda6 ends after the last sector of /dev/sda "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 6596D86768011128 ntfs /dev/sda5 1300D3B7744EC141 ntfs Schule /dev/sda6 5b95f2a1-4145-43a5-ac51-41d7dd32b213 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) ================================ sda1/boot.ini: ================================ [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptOut multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect [spybotsd] timeout.old=30 the last part shows that i now use the windows boot loader so that i can acces at least one OS but shouldnt i also get acces to my ubuntu partitions with live-linux-cds ? or do i have to boot with grub to get to those files only ??

    Read the article

  • Reading a POP3 server with only TcpClient and StreamWriter/StreamReader[SOLVED]

    - by WebDevHobo
    I'm trying to read mails from my live.com account, via the POP3 protocol. I've found the the server is pop3.live.com and the port if 995. I'm not planning on using a pre-made library, I'm using NetworkStream and StreamReader/StreamWriter for the job. I need to figure this out. So, any of the answers given here: http://stackoverflow.com/questions/44383/reading-email-using-pop3-in-c are not usefull. It's part of a larger program, but I made a small test to see if it works. Eitherway, i'm not getting anything. Here's the code I'm using, which I think should be correct. EDIT: this code is old, please refer to the second block problem solved. public Program() { string temp = ""; using(TcpClient tc = new TcpClient(new IPEndPoint(IPAddress.Parse("127.0.0.1"),8000))) { tc.Connect("pop3.live.com",995); using(NetworkStream nws = tc.GetStream()) { using(StreamReader sr = new StreamReader(nws)) { using(StreamWriter sw = new StreamWriter(nws)) { sw.WriteLine("USER " + user); sw.Flush(); sw.WriteLine("PASS " + pass); sw.Flush(); sw.WriteLine("LIST"); sw.Flush(); while(temp != ".") { temp += sr.ReadLine(); } } } } } Console.WriteLine(temp); } Visual Studio debugger constantly falls over tc.Connect("pop3.live.com",995); Which throws an "A socket operation was attempted to an unreachable network 65.55.172.253:995" error. So, I'm sending from port 8000 on my machine to port 995, the hotmail pop3 port. And I'm getting nothing, and I'm out of ideas. Second block: Problem was apparently that I didn't write the quit command. The Code: public Program() { string str = string.Empty; string strTemp = string.Empty; using(TcpClient tc = new TcpClient()) { tc.Connect("pop3.live.com",995); using(SslStream sl = new SslStream(tc.GetStream())) { sl.AuthenticateAsClient("pop3.live.com"); using(StreamReader sr = new StreamReader(sl)) { using(StreamWriter sw = new StreamWriter(sl)) { sw.WriteLine("USER " + user); sw.Flush(); sw.WriteLine("PASS " + pass); sw.Flush(); sw.WriteLine("LIST"); sw.Flush(); sw.WriteLine("QUIT "); sw.Flush(); while((strTemp = sr.ReadLine()) != null) { if(strTemp == "." || strTemp.IndexOf("-ERR") != -1) { break; } str += strTemp; } } } } } Console.WriteLine(str); }

    Read the article

  • Can Android do peer-to-peer ad-hoc networking?

    - by Doughy
    Is it possible to set up Android in ad-hoc peer-to-peer wifi mode? For example, I would like to have one phone broadcast a message, and have all peers in the network receive the broadcast, without having a server. I would like to use wifi since bluetooth range is more limited.

    Read the article

  • Why do child elements cause 'dropleave' to be called (drag-n-drop file upload)?

    - by tundoopani
    I have a HTML5 drag-n-drop script that allows users to drop files in #droparea. The #droparea div has child elements that are also div elements. <div id="droparea"> <div id="showif_no_dragover">Drag files here!</div> <div id="showif_dragover">Drop the files!</div> </div> The associated javascript/jquery is: var droptarget = "#droparea"; $(droptarget).live('dragenter', dragEnter); $(droptarget).live('dragleave', dragExit); $(droptarget).live('dragover', nothing); $(droptarget).live('drop', dropGo); (Side question: should I use .live(), .on() or .bind() here?) I have created a sample jsFiddle with some additional code here: http://jsfiddle.net/PwFr9/3/ If you look at the console, you will notice that as you drag a file within #droparea, dragenter() and dragleave() are called multiple times, even though the drag is still inside #droparea. If you remove the child elements (#child1 and #child2), the problem is gone because the child elements are gone. How can I keep the child elements and prevent them from messing up the drag events? I have searched Stackoverflow and Google for hours without much help. I found this questions here at Stackoverflow: How to keep child elements from interfering with HTML5 dragover and drop events? I don't know why it works, though. I have tried placing 2 div elements on top of each other (via CSS positioning). The top-most div has the drag events attached whereas the bottom-most div has the child elements. I do not like this approach because it doesn't work with the rest of my page and does not allow mouse-click interaction with the bottom-most div. Any help is appreciated! Thank you in advance. Regards, tundoo

    Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >