Search Results

Search found 15387 results on 616 pages for 'os imaging'.

Page 68/616 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Port Redirection on Mac OS X Lion

  - by Andreas

  I have tried to solve this issue using pf but with no luck. Basically, I am trying to redirect incoming port 443 traffic to port 22. I have tried to set up a rule in a file and load it in pf but I get syntax error. Can anyone with more experience with pf provide some insight? Here's what I've attempted: pass in on en1 proto tcp from any to any port 443 rdr-to 127.0.0.1 port 22 and pass in quick proto tcp to port 443 rdr-to 127.0.0.1 port 22 I've been able to do this in MacOSX Snow Leopard with ipfw: sudo ipfw add 1443 forward 127.0.0.1,22 ip from any to any 443 in but it doesn't work in Lion (it gives me an Invalid Argument error).

  Read the article

• OS X 10.8.3 + attempt to change VPN settings = no more VPN access

  - by nicole

  I am running Mountain Lion and had gotten very tired of re-entering my password at random times when using my school's VPN network (I don't know much about these, but the type is Cisco IPSec according to the setup instructions I followed a while back). In an attempt to make life easier, I followed the instructions here, but, alas, any attempt to connect with VPN was met with the message "A configuration error has occurred. Verify your settings and try connecting again" (or something along those lines.) I then tried to do the steps in the blog post in reverse and change everything back. Upon (supposedly) doing that, though, a new error message came when attempting to connect to VPN: "The negotiation with the VPN server failed. Verify the server address and try reconnecting." Now I have no idea what to do. Is there a way to reset all VPN-related things in my system so that I can follow my school's instructions and just start over?

  Read the article

• Best Guest OS for running freeswitch under Proxmox

  - by Frank Waller

  We have a lot of asterisk Systems running on dedicated machines and would like to use freeswitch to replace a number of them. One of the advantages of freeswitch is supposed to be that it is doing much better in a virtualized environment than asterisk is. However I can find very little information about people using it in Proxmox containers. I would like to know if anyone has seen any ready to run proxmox images that include freeswitch so we can test a number of things without having to deeply go into creating our own. Or at least a clue to which system images/distro images we can use to quickly get it installed not having to deal with too many dependency or different Linux version issues. Just to be clear: It should be for a more or less current Proxmox and current freeswitch. I am not looking forward to use the KVM mode but would consider it, if it is otherwise ready to run out of the box. I would rather use a real OpenVZ based container. Thanks for anyone helping!

  Read the article

• Cannot Start Passenger 3.0.18 Using Mountain Lion (OS X Server) and RVM

  - by LightBe Corp

  I recently did a clean install of Mountain Lion on my Mac Mini Server. I installed version 3.0.18 using a gem according to the directions on http://www.phusionpassenger.com with no errors that I could see. rvmsudo gem install passenger-enterprise-server-3.0.18.gem rvmsudo passenger-install-apache2-module Here are my entries in /etc/apache2/httpd.conf with my username masked: LoadModule passenger_module /Users/username/.rvm/gems/ruby-1.9.3-p327/gems/passenger-enterprise-server-3.0.18/ext/apache2/mod_passenger.so PassengerRoot /Users/username/.rvm/gems/ruby-1.9.3-p327/gems/passenger-enterprise-server-3.0.18 PassengerRuby /Users/username/.rvm/wrappers/ruby-1.9.3-p327/ruby I uncommented out the following statement: Include /private/etc/apache2/extra/httpd-vhosts.conf Here is a sample virtual host entry. I have three of them in the file. <VirtualHost *:80> ServerName www.mydomain.com ServerAlias mydomain.com PassengerAppRoot /Users/username/Sites/myfolder/ DocumentRoot /Users/username/Sites/myfolder/public <Directory /Users/username/Sites/myfolder/public> Allow from all AllowOverride all Options -MultiViews </Directory> </VirtualHost> I have restarted Apache several times. Here is information from my server: [~]$ ps -ef | grep Passenger 501 18804 303 0 12:39PM ttys000 0:00.00 grep Passenger [~]$ rvmsudo passenger-status Password: **ERROR: Phusion Passenger doesn't seem to be running.** [~]$ rvmsudo passenger-config --version 3.0.18 I have tried doing online searches on this. I was surprised that there was not all that much on this specific error even though from my understanding Passenger has been around for a few years. I have posted this issue on the Phusion Passenger Google Groups but have not heard anything. Any help would be appreciated, the sooner the better LOL. Seriously I need to have one of my three websites up by tomorrow evening. This is the only issue stopping that from happening. Thanks again.

  Read the article

• 550 Requested action not taken: mailbox unavailable on OS X server 10.6

  - by Marc Graham

  I recently added a new domain to my mail server. I have 1 main server mail.example.com and several others that have the mx record pointing to mail.example.com. My two new domains have the mx record set correctly. The issue I am experiencing is the 550 Requested action not taken: mailbox unavailable error but only when I send emails to accounts on the new urls from an external email account such as gmail. If i send an email to one of the newly made email addresses with the new url from an email account within the same server it delivers normally. For example.... sending [email protected] to [email protected] receives 550 error sending [email protected] to [email protected] works normal here is a report from wormly.com with server and account names changed for obvious reasons Resolving hostname... Connecting... SMTP -> FROM SERVER: 220 existingmailserver.com ESMTP Service ready SMTP -> FROM SERVER: 250-Requested mail action okay, completed 250-SIZE 0 250-AUTH LOGIN PLAIN CRAM-MD5 250-ETRN 250-8BITMIME 250 OK MAIL FROM: [email protected] SMTP -> FROM SERVER: 250 Requested mail action okay, completed RCPT TO: [email protected] SMTP -> FROM SERVER: 550 Requested action not taken: mailbox unavailable SMTP -> ERROR: RCPT not accepted from server: 550 Requested action not taken: mailbox unavailable Message sending failed.

  Read the article

• OS X Automator empty, blank or null value.

  - by Brian

  I have some data files mostly excel, word and pdf files most of the files have no extension on them. So they are missing the .doc .xls. This data needs to be used in a Windows environment now. I have created automator apps for each of the file types I want to add the ext onto. The problem is it also adds the extension to files that already have an extension. So data.xls becomes data.xls.xls I would like to figure a way to only add the extenion to the files without extension. How do I tell the finder filter that i only want it to return files without extensions. I see how to add a line to filter by extension but I don't know how to let it know I want only blank or null or files without any extensions. Thanks

  Read the article

• Safari on Mac OS X lasts beyond Empty Cache

  - by Mitch

  So, I broke a website with some server changes oops. I roll back the changes I made, hit cmd-R, and oh noes, it is still broken. But I relax thinking, there must be something held in safari's cache so I press the handy 'Empty Cache' button. Hit cmd-R for refresh it is still broken. I'm really worried that I've done it and broken something bigtime. But first decide to check on a hand win xp computer, and voila it works. So the question is how do you "really" clear the cache w/o restart safari, I have many browser windows open a restart every time I make a server side change will ruin me. Any suggestions? Thanks!

  Read the article

• External hard drive is recognized but not mounted in OS X

  - by Sam Bryant

  My external HD got unplugged without ejecting and my Mac will no longer mount the drive, but it recognizes it's there. I already tried repairing the disk in Disk Utility, and erasing it in Disk Utility, and it still won't mount. I can't imagine the hardware is actually damaged otherwise it wouldn't even recognize it (Right?). Is there any other software solution I can try? Recovering my files is not a concern.

  Read the article

• Two DHCP interfaces asigned to two default gateways to OS

  - by user140600

  I have a Ubuntu box that has two networking interfaces (eth0 and wlan0). They are both configured for DHCP in /etc/network/interfaces, but they both assign a default gateway: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto wlan0 iface wlan0 inet dhcp wireless-essid test Result of route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 172.16.1.1 0.0.0.0 UG 100 0 0 wlan0 0.0.0.0 10.0.0.1 0.0.0.0 UG 100 0 0 eth0 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 172.16.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 How can I set up /etc/network/interfaces to have only one default gateway, on the interface I want? Worst case scenario, how can I at least control which one gets on top on the route -n command, each boot? Note: This box will travel a lot, and will be connected to different networks, so I don´t know in advance the IP addresses/ranges it will have. Sometimes the default gw interface will be eth0. Sometimes it will be wlan0 ... So, this needs to be kind of automatic ...

  Read the article

• How to see OS licenses?

  - by Erika Szabo

  I have genuine license of Windows 7 Ultimate, VS Professional 2008. I want to sell the license keys. How do I do it?

  Read the article

• Changing Windows 'hosts' file in guest OS under Parallels Desktop 6 on Mac

  - by ling

  I am running Win7 in a Parallels Desktop 6 on Mac. On the mac, I use /etc/hosts : 127.0.0.1 mysite and it works fine : I can type mysite in the url and the website will display. What I want to do is be able to reproduce the same on Win7 with IE8 for example. Another guy did it successfully here but I can't : Parallels: How to see a Mac-hosted website from Windows? On Mac : ifconfig -a vnic0 10.211.55.2 on Win7 I tried this C:\Windows\System32\drivers\etc\hosts 10.211.55.2 mysite What am I missing ?

  Read the article

• OS X Terminal ends session at opening : permission denied

  - by Jon

  I have an issue with Terminal on MacOS X 10.7.4. I know where it comes from, but I don't know how to solve it : Yesterday, I installed fish-shell as a shell replacement. Following the installation instructions, I ended typing the following command : chsh -s /usr/local/bin/fish I noticed I had to do a : sudo bash for it to work. Once done, I quit. Today, I try to run Terminal and I see te following message : Last login: Wed Jun 27 12:38:01 on ttys000 login: /usr/local/bin/fish: Permission denied [Opération terminée] (yes, I'm French, which explains my poor English). I cannot type any command since I have no access to the Terminal. I tried with iTerm2 but same issue. No command is set at launch in the default profile of Terminal/iTerm2 (well, in the UI). How can I take the power back ? Thank you.

  Read the article

• Major permission repair needed on Mac Os

  - by Luke1111

  I made the fatal error of copying and pasting a sudo command into my terminal without double checking it, here it is. sudo -R mysql / What this does (for those that don't know) is recursively change the owner every file from the root down to mysql!! obviously not what i was intending This has of course played havoc with my system, the first thing i did was the apple permission repair but that only works for files that it has an idea of though it has changed a lot of file ownerships back to root. It seems that many library files are still owned incorrectly, as a lot of problems don't work. What i propose doing as a temporary fix until i can reinstall mountain lion is to recursively set all ownerships that are mysql to Luke. I'm not sure what they should precisely but this is still better than nothing. Is this possible using a shell script? I realise that this won't fix the problem properly and i will have to reformat but i need the machine in a workable state just for this week.

  Read the article

• Changing Windows 'hosts' file in guest OS under Parallels Desktop 6

  - by Jan

  Hi all, I am running Win7 in a Parallels Desktop 6 on Mac. I would like to modify my Windows hosts file. When doing this through notepad it says "You don't have permission to save in this location..." I am logged on as a regular windows user - not as 'local admin'. How can I edit the file? How can I grant my regular user 'local admin' rights? How can change the Windows user to 'admin' ... this option seems to be missing in my windows install... Does anybody recognize the issue? Thank you! J.

  Read the article

• Watch Filesystem in Real Time on OS X and Ubuntu

  - by Adrian Schneider

  I'm looking for a CLI tool which will watch a directory and spit out the names of files that change in real time. some_watch_command /path/to/some/folder | xargs some_callback I'm aware of inotify (inotify-tools?) and it seems to be what I need, but I need something that is both Linux (in my case Ubuntu) and OSX compatible. It doesn't need to be lightning fast, but it does need to trigger upon changes (within a second is reasonable). Also, I don't necessarily need the exact CLI program mentioned above. If some underlying tech exists and is easily scriptable on both platforms that would be great too.

  Read the article

• Converting the encoding of a text file (Mac OS X)

  - by Casebash

  Okay, now that I can detect the encoding, I know that my encoding is using charset=iso-8859-1 instead of utf. How can I convert this?

  Read the article

• Better Gmail 2 Firefox Addon for Fluid (Site Specific Browser for OS X)

  - by Yar

  Is there a simple way to get the Better Gmail 2 addon to work in Fluid?

  Read the article

• MAMP Pro mysqld won't start on os x lion

  - by Mike

  getting a Start MySQL Failed error in the GUI.. when i attempt to start mysqld from the CLI i get the following error: ? /Applications/MAMP/Library/bin/mysqld 120623 23:12:47 [Warning] Setting lower_case_table_names=2 because file system for /Applications/MAMP/db/mysql/ is case insensitive 120623 23:12:47 [Note] Plugin 'FEDERATED' is disabled. 120623 23:12:47 InnoDB: The InnoDB memory heap is disabled 120623 23:12:47 InnoDB: Mutexes and rw_locks use GCC atomic builtins 120623 23:12:47 InnoDB: Compressed tables use zlib 1.2.3 120623 23:12:47 InnoDB: Initializing buffer pool, size = 128.0M 120623 23:12:47 InnoDB: Completed initialization of buffer pool 120623 23:12:47 InnoDB: highest supported file format is Barracuda. 120623 23:12:47 InnoDB: Waiting for the background threads to start 120623 23:12:48 InnoDB: 1.1.5 started; log sequence number 1595675 120623 23:12:48 [ERROR] /Applications/MAMP/Library/bin/mysqld: unknown option '--skip-locking' 120623 23:12:48 [ERROR] Aborting 120623 23:12:48 InnoDB: Starting shutdown... 120623 23:12:49 InnoDB: Shutdown completed; log sequence number 1595675 120623 23:12:49 [Note] /Applications/MAMP/Library/bin/mysqld: Shutdown complete i have deleted the mysql.pid file located at /application/mamp/tmp/mysql/mysql.pid and i still get the error above. I can't find where MAMP has set --skip-locking set, my.cnf doesnt have it anywhere. Activity monitor gives me a mysqld process running by me, and everytime i KILL the process both via Activity Monitor and via kill =9 pid it starts right back up.. Sampling the process points back to the MAMP mysqld.. wtf?! About to throw MAMP out the window and boot up a VM of CentOS =)

  Read the article

• How to troubleshoot problems sharing internet connection via WiFi on Mac OS X

  - by sprugman

  I'm at a hotel, plugged into their network via ethernet on my MacBook. I want to share the connection via wifi to two other computers. I went to Prefs Sharing and set up internet sharing. I know it's working because my friend with a Mac access the net fine. My friend with the PC can see the network, but can't connect to it. In the sharing prefs, airport options, I chose these options: Channel: Automatic Enable encryption: yes WEP Key length 40-bit password length: 5 chars (as specified in the instructional text) Update: I tried it with encryption turned off, and it works. Of course, I'd rather not do that... Any ideas?

  Read the article

• Sudden loss of Wi-Fi connectivity on OS X

  - by GJ.

  Occasionally while I work, without any special provocation, I lose connectivity via Wi-Fi. Other devices connected to the same wifi network have no interruption, and the problem gets resolved once I reboot my MacBook Air, so it's definitely a local problem. Observations: The Wi-Fi symbol in the menu indicates that I'm still connected, but apps can't actually connect neither to the Internet nor to other devices in the LAN. I can't connect to an alternate Wi-Fi network (e.g. Wi-Fi tethering via iPhone). I can connect to the Internet via iPhone USB tethering but this seems to only work some of the time. Only a reboot solves the problem but a regular restart gets stuck on a grey screen with rotating wheel (after all applications have closed) and I have to do a hard reset. How should I go about troubleshooting this? It used to happen very rarely but now is becoming more frequent (approaching once every 2-3 days on average).

  Read the article

• Automount of AFP shares on Lion clients from OS X Snow Leopard server - not working right

  - by Paul

  Recently upgraded Snow Leopard clients to Lion. AFP shares are set up as login items. The network shares on some of the machines now take a long time to come up (10 minutes). Several machines that were upgraded are acting normally, and three machines with clean installs of Lion (not upgraded) are also working normally. Is there a network file causing a conflict on some of these client machines? Thanks, Paul

  Read the article

• Go back to 32-bit Java in OS X so I can use Chrome

  - by Mac Kris

  Recently Apple released a Java update. I mindlessly downloaded and installed it, thinking it must be good (I know that was stupid on my part). Now chrome doesn't work where sites require Java support. In terminal, java -version shows I have the 64bit version installed. I know Chrome does not support 64bit Java. I'd like to go back to the last version that worked for me, the 32-bit version. I don't want to use Safari or Firefox. I'd like Chrome to work. I have too much invested in customizing it to work with another browser.

  Read the article

• Screenshot is black in Mac OS X SL

  - by kirbez.ya.ru

  When I press cmd+shift+3 in desktop saves black 1400x900 file Command: defaults write com.apple.screencapture disable-shadow -bool true Does not work

  Read the article

• Permissions in OS X for iTunes library with multiple users

  - by John

  I currently have a lot of music on an external drive and my iTunes set up from there. However, periodically, when the external drive isn't connected, iTunes will default back to the library location of my home directory user path. I don't want to mess with an external drive, as my Mac's HD is large enough to house the music collection. However, I have 4 family members – all with their own logins – using this same gob of music. I don't want four copies of the library, only one with all libraries referencing it. So, what I want to do is: Move all music files to a shared directory at /Macintosh HD/users/music. I created this directory and adjusted permissions, so all four users can read and write to this directory. Get all four accounts to reference this library instead of the external or local home locations I am hoping I can just check the box to keep library organized in my account, which is the admin and let iTunes move it all. Then delete current libraries for each account and re-add from the new shared location. Will the iTunes organization process cause permissions issues either by setting permissions to all the files access to my account only or write permissions or any other 'gotcha'? I am having a hard time coming up with a smooth solution that won't break everything and cause me to have mega duplicates or access issues. I would prefer not to do any XML library file editing if possible. Am I dreaming?

  Read the article

• Wake for Network Access Apache servr in OS X 10.8, followup

  - by Gary

  Sorry, I can't seem to post this response within the same thread. Thank you both (Zoredache and Gordon) for your answer. But the fix seems temporary. I entered the command you suggested, and it seemed to work: ...smith$ Registering Service ApacheNoDoz._http._tcp.local port 80 DATE: ---Fri 14 Sep 2012--- 12:04:15.813 ...STARTING... 12:04:16.566 Got a reply for service ApacheNoDoz._http._tcp.local.: Name now registered and active So, I checked for it on my G5: Browsing for _http._tcp Timestamp.....A/R Flags if Domain......Service Type...Instance Name (lots of Bonjour printers omitted)... 12:07:38.370..Add.....2..4 local.......... _http._tcp.........ApacheNoDoz 12:07:45.921..Rmv.....0..4 local..........._http._tcp.........ApacheNoDoz So, it was running at 12:07:38, at which time the host was asleep. But, shortly after, the activity seems to have been removed. I don't know why. Does this mean that I can never let the cpu sleep, or is there something else I have to set? Thanks, again.

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >