Search Results

Search found 4864 results on 195 pages for 'resolv conf'.

Page 68/195 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Installing ikiwiki on nginx - fastcgi/fcgi wrapper

  - by meder

  My ultimate goal is to setup ikiwiki, my current goal is to get a fcgi wrapper working for nginx, so I can move on to the next step... The ikiwiki page points out this page as an example for a fcgi wrapper: http://technotes.1000lines.net/?p=23 So far I've installed the ikiwiki and libfcgi-perl modules through aptitude: aptitude install libfcgi-perl aptitude install ikiwiki It installed those packages as well as some minimal dependency packages. So the next step following the guide at technotes, I grabbed http://technotes.1000lines.net/fastcgi-wrapper.pl but I'm not sure where to actually place this file... do I run it as a service? The script makes a socket file in /var/run/nginx but that directory does not exist.. do I manually create it? So in addition to the .pl file for the cgi wrapper, I need to also define a separate cgi file for parameters. If my conf looks like this... server { listen 80; server_name notes.domain.org; access_log /www/notes/public_html/notes.domain.org/log/access.log; error_log /www/notes/public_html/notes.domain.org/log/error.log; location / { root /www/notes/public_html/notes.domain.org/public/; index index.html; } } And I don't have a cgi-bin directory, where exactly should I create it within my structure, and regarding that I'd obviously have to update the below before I include it in my conf, but I'm just not exactly sure how this would work out. # /cgi-bin configuration location ~ ^/cgi-bin/.*\.cgi$ { gzip off; fastcgi_pass unix:/var/run/nginx/perl_cgi-dispatch.sock; [1]* fastcgi_param SCRIPT_FILENAME /www/blah.com$fastcgi_script_name; [2]* include fastcgi_params; [3]* } Also since the user is www-data and /var/run is root owned, what's the proper way of giving it access? Any tips appreciated.

  Read the article

• How config nginx to serve flv video streaming with JWplayer

  - by Nisanio

  I need to serve flv files from one server, and show those videos on a web page located in another server, with JWPlayer. I already config nginx with the flv module, an put this on nginx.conf location ~ \.flv$ { flv; } The code I use in the jwplayer is <object id="player" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" name="player" width="328" height="200"> <param name="movie" value="player.swf" /> <param name="allowfullscreen" value="true" /> <param name="allowscriptaccess" value="always" /> <param name="flashvars" value="file=http://XX.XX.XX.XX/vid5.flv&image=preview2.jpg" /> <embed type="application/x-shockwave-flash" id="player2" name="player2" src="player.swf" width="630" height="385" allowscriptaccess="always" allowfullscreen="true" flashvars="file=http://XX.XX.XX.XX/vid5.flv&image=preview2.jpg" /> </object> Where XX.XX.XX.XX is the ip address of the server (we'll config an appropiate domain, but first i have to make the whole thing works :) ) The problem is that nothing happen. I don't know what to do next, all the articles on the internet only talks about how compile the flv module (already done) and add the nginx.conf lines. Any help would be greatly appreciate Thanks in advance

  Read the article

• gen-msg.map missing in Snort rules?

  - by TheLQ

  I am trying to install Snort 2.8.4.1 (only package available in the repos) with Barnyard2 with limited success. I've managed to fix everything but this: [lordquackstar@quackwall rules]$ sudo barnyard2 -c /etc/snort/barnyard2.conf -d /var/log/snort -f snort.u2 -w /etc/snort/barny Password: Running in Continuous mode --== Initializing Barnyard2 ==-- Initializing Input Plugins! Initializing Output Plugins! Parsing config file "/etc/snort/barnyard2.conf" ERROR: Unable to open Generator file "/etc/snort/gen-msg.map": No such file or directory ERROR: Stat check on log dir (/var/log/barnyard2) failed: No such file or directory. Fatal Error, Quitting.. The gen-msg.map error is puzzling me. The rulesets that come with the package do not contain this file. The newish rules I just downloaded from Snort.org for version 2.8.6.1 don't have this file. The only file that looks close is called sid-msg.map, but that's the wrong one. Where can I obtain this file? Just in case it matters: The packages come from the ClearOS repositories (OS is based off of CentOS). I'm running CentOS 5.2

  Read the article

• Apache2 Permission denied: access to / denied

  - by futureled

  Hi, after installing and starting apache2 i can't open the website and got the error "Forbidden You don't have permission to access / on this server." I tried some different options in the httpd.conf, but nothing helped me solving this problem. All permissions for every directory are "drwxr-xr-x". The directory /www contains a file names index.html with the same permissions. Please do not wonder, the time in the errorlog is not correctly. I have no idea what the problem is, i hope someone can help me. my httpd.conf: ServerRoot "/etc/apache2" Listen 80 User daemon Group daemon ServerAdmin [email protected] DocumentRoot "/var/www" Options FollowSymLinks AllowOverride None Order Deny,Allow Deny from all Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all DirectoryIndex index.html Order allow,deny Deny from all Satisfy All ErrorLog /var/apache2/logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog /var/apache2/logs/access_log common ScriptAlias /cgi-bin/ "/usr/share/apache2/cgi-bin/" AllowOverride None Options None Order allow,deny Allow from all DefaultType text/plain TypesConfig /etc/apache2/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz SSLRandomSeed startup builtin SSLRandomSeed connect builtin my error_log: [Sat Jan 01 00:50:26 2000] [notice] caught SIGTERM, shutting down [Sat Jan 01 00:50:33 2000] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Sat Jan 01 00:50:34 2000] [notice] Apache/2.2.3 (Unix) mod_ssl/2.2.3 OpenSSL/0.9.8j configured -- resuming normal operations [Sat Jan 01 00:50:36 2000] [error] [client 192.168.1.44] (13)Permission denied: access to / denied [Sat Jan 01 00:50:37 2000] [error] [client 192.168.1.44] (13)Permission denied: access to / denied [Sat Jan 01 00:50:37 2000] [error] [client 192.168.1.44] (13)Permission denied: access to / denied [Sat Jan 01 00:50:37 2000] [error] [client 192.168.1.44] (13)Permission denied: access to / denied [Sat Jan 01 00:50:38 2000] [error] [client 192.168.1.44] (13)Permission denied: access to / denied [Sat Jan 01 00:50:38 2000] [error] [client 192.168.1.44] (13)Permission denied: access to / denied

  Read the article

• Nginx case-insensitive reverse proxy rewrites

  - by BrianM

  I'm looking to setup an nginx reverse proxy to make some upcoming server moves and load balanced implementations much easier within our apps. Since our servers are all IIS case sensitivity hasn't been an issue, but now with nginx it's becoming one for me. I am simply looking to do a rewrite regardless of case. Infrastructure notes: All backend servers are IIS Most services are WCF services I am trying to simplify the URLs so I can move services around as we continue to build out I can't set my location to case insensitive due to the following error: nginx: [emerg] "proxy_pass" cannot have URI part in location given by regular expression, or inside named location, or inside "if" statement, or inside "limit_except" block in /etc/nginx/sites-enabled/test.conf:101 The main part of my conf file where I am trying to handle the rewrite is as follows location /svc_test { proxy_set_header x-real-ip $remote_addr; proxy_set_header x-forwarded-for $proxy_add_x_forwarded_for; proxy_set_header host $http_host; proxy_pass http://backend/serviceSite/WFCService.svc; } location ~* /test { rewrite ^/(.*)/$ /svc_test/$1 last; } It's the /test location that I can't get figured out. If I call http://nginxserver/svc_test/help I get the WCF help page to display correctly and I can make all available REST calls. This HAS to be a boneheaded regex issue on my part, but I have tried several variations and all I can get are 404 or 500 errors from nginx. This is NOT rocket science so can someone point me in the right direction so I can look like an idiot and just move on?

  Read the article

• Amazon Ec2: Problem In Setting up FTP Server

  - by Muntasir

  after setting up My vsFtp Server ON Ec2 i am facing problem , my client is Filezilla and i am getting this error Response: 230 Login successful. Command: OPTS UTF8 ON Response: 200 Always in UTF8 mode. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 500 OOPS: invalid pasv_address Command: PORT 10,130,8,44,240,50 Response: 500 OOPS: priv_sock_get_cmd Error: Failed to retrieve directory listing Error: Connection closed by server this is the current setting in my vsftpd.conf #nopriv_user=ftpsecure #async_abor_enable=YES # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list GNU nano 2.0.6 File: /etc/vsftpd/vsftpd.conf # #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES pasv_enable=YES pasv_min_port=2345 pasv_max_port=2355 listen_port=1024 pasv_address=ec2-xxxxxxx.compute-1.amazonaws.com pasv_promiscuous=YES Note: i have already open those port in security group i mean listen port, min max if someone shows me how to fix this i will be very greatful thanks

  Read the article

• Xenserver 6.2 cannot send alert using gmail smtp

  - by Crimson

  I'm using Xenserver 6.2 and configured ssmtp.conf an mail_alert.conf in order to receive alerts through email. I followed the instructions on http://support.citrix.com/servlet/KbServlet/download/34969-102-706058/reference.pdf document. I'm using gmail smtp to send the emails. When i try: [root@xen /]# ssmtp [email protected] from the command line and try to send the email, no problem. It is right on the way. But when i set some VM to generate alerts, alerts are generated. I see in XenCenter but emailing is not working. I see this in /var/log/maillog file: May 27 16:17:09 xen sSMTP[30880]: Server didn't like our AUTH LOGIN (530 5.7.0 Must issue a STARTTLS command first. 18sm34990758wju.15 - gsmtp) From command line every thing works fine. This is the log record for the above command line operation: May 27 15:55:58 xen sSMTP[27763]: Creating SSL connection to host May 27 15:56:01 xen sSMTP[27763]: SSL connection using RC4-SHA May 27 15:56:04 xen sSMTP[27763]: Sent mail for [email protected] (221 2.0.0 closing connection ln3sm34863740wjc.8 - gsmtp) uid=0 username=root outbytes=495 Any ideas?

  Read the article

• svn: unknown hostname for hostname that does indeed exist

  - by tipu

  I am running a centos 5 image on the vmware player and as of recently, I was able to check out from a repository that is no longer working. I am now getting: svn: Unknown hostname 'www.kennykong.com' It is a valid hostname and I know this because I have this svn location on Windows and I can browse/checkout no problem. After doing some searching I have (mostly blindly) assumed it's a DNS error because for i in 'grep nameserver /etc/resolv.conf | cut -d " " -f 2' ; do dig @$i domain.com ; done returns done ; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5 <<>> @192.168.1.1 domain.com ; (1 server found) ;; global options: printcmd ;; connection timed out; no servers could be reached I am unsure what to do from here to get my centos to recognize more servers

  Read the article

• using RHEL5 as a router

  - by gopikrishna7779

  Dear Sir, I am planning to use a RHEL5 installed computer as a internet connection sharing device. I mean I want to share the internet connection through it I have installed 2 Lan cards in it eth0 and eth1 eth0 Internet eth1 LAN eth0 configuration as follows ; Ipaddress : 115.252.64.187 Subnet : 255.255.255.240 Gateway : 115.252.64.177 I wrote the following entries in Vim /etc/resolv.conf nameserver 202.138.96.2 (preferred DNS Server) nameserver 202.138.103.2 (secondary DNS server) :q! then eth1 ipaddress : 192.168.1.1 subnet : 255.255.255.0 gateway : 192.168.1.1 (I am confused which gateway I need to use in the above scenario) I am unable to ping to my lan and I am able to connect to the Internet. Please let me know the sollution for this. Thanks in advance. regards, G.Gopi Krishna

  Read the article

• flask, lighttpd with fastcgi can't get it to work

  - by kurojishi

  i'm tring to deploy a simple flask script to a lighttpd server with fastcgi. this is the configuration file for lighttpd builded using the flask documentation http://flask.pocoo.org/docs/deploying/fastcgi/#configuring-lighttpd server.modules = ( "mod_access", "mod_alias", "mod_compress", "mod_redirect", "mod_rewrite", "mod_fastcgi", ) server.document-root = "/var/www" server.upload-dirs = ( "/var/cache/lighttpd/uploads" ) server.errorlog = "/var/log/lighttpd/error.log" server.pid-file = "/var/run/lighttpd.pid" server.username = "www-data" server.groupname = "www-data" index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", " index.lighttpd.html" ) url.access-deny = ( "~", ".inc" ) static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) var.home_dir = "/var/lib/lighttpd" var.socket_dir = home_dir + "sockets/" ## Use ipv6 if available #include_shell "/usr/share/lighttpd/use-ipv6.pl" dir-listing.encoding = "utf-8" server.dir-listing = "enable" compress.cache-dir = "/var/cache/lighttpd/compress/" compress.filetype = ( "application/x-javascript", "text/css", "text/html", "text/plain" ) include_shell "/usr/share/lighttpd/create-mime.assign.pl" include_shell "/usr/share/lighttpd/include-conf-enabled.pl" fastcgi.server = ("weibo/callback.fcgi" => (( "socket" => "/tmp/weibocrawler-fcgi.sock", "bin-path" => "/var/www/weibo/callback.fcgi", "check-local" => "disable", "max-procs" => 1 )) ) url.rewrite-once = ( "^(/weibo($|/.*))$" => "$1", "^(/.*)$" => "weibo/callback.fcgi$1" and this is the script i'm tring to run: #!/home/nrl/kuro/weiboenv/bin/python from flup.server.fcgi import WSGIServer from callback import app if __name__ == '__main__': WSGIServer(application, bindAddress='/tmp/weibocrawler-fcgi.sock').run() but i have this error testing the configuration file i get this error: 2013-07-02 17:15:42: (configfile.c.912) source: lighttpd.conf.new line: 52 pos: 1 parser failed somehow near here: weibo/callback.fcgi$1 when i remove the urlrewrite i get these errors in the log even if the daemon start: 2013-07-02 16:25:53: (log.c.166) server started 2013-07-02 16:25:53: (mod_fastcgi.c.1104) the fastcgi-backend fcgi.py failed to start: 2013-07-02 16:25:53: (mod_fastcgi.c.1108) child exited with status 2 fcgi.py 2013-07-02 16:25:53: (mod_fastcgi.c.1111) If you're trying to run your app as a FastCGI backend, make sure you're using the FastCGI-enabled version. If this is PHP on Gentoo, add 'fastcgi' to the USE flags. 2013-07-02 16:25:53: (mod_fastcgi.c.1399) [ERROR]: spawning fcgi failed. 2013-07-02 16:25:53: (server.c.938) Configuration of plugins failed. Going down.

  Read the article

• How to Apache SSL proxy to openerp 7 running in VM?

  - by Johnbritto

  I have installed openerp v7 in an ubuntu 12.04 Virtual machine from launchpad.i.e server, web, addons. I configured SSL reverse proxy on virtual machine and my configuration for virtual host *:443 are ServerName openerp.mydomain.net ServerAdmin openerp@localhost SSLEngine on SSLCertificateFile /etc/ssl/openerp/server.crt SSLCertificateKeyFile /etc/ssl/openerp/server.key ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyVia On ProxyPass / http://172.16.150.14:8069/ ProxyPassReverse / http://172.16.150.14:8069/ RequestHeader set "X-Forwarded-Proto" "https" # Fix IE problem (httpapache proxy dav error 408/409) SetEnv proxy-nokeepalive 1 </VirtualHost> on host, I have configured apache reverse proxy for my subdomain in vhost_ssl.conf as SSLEngine On SSLProxyEngine On ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / https://172.16.150.14/ ProxyPassReverse / https://172.16.150.14/ SetEnv proxy-nokeepalive 1 <Location /> Order allow,deny Allow from all </Location> I have set 172.16.150.14 on netrpc and xmlrcs interfaces in openerp-server.conf. Now, when I access https:// openerp.mydomain.net from Girefox and chrome browser..I get http:// openerp.mydomain.net%2C%20openerp.mydomain.net/?db=testingdb which makes 404. But when i access URL from IE 9, the URL https:// openerp.mydomain.net works ok .. secondly if i change the parameter list_db= false, then the links works as expected.. Kindly let me know what is creating bottleneck with URL redirect to http://openerp.mydomain.net, openerp.myydomain.net/?db=testdb on Firefox and chrome. i am struck here doing troubleshooting with the URL to work.

  Read the article

• Ubuntu 12.04 LDAP SSL self-signed cert not accepted

  - by MaddHacker

  I'm working with Ubuntu 12.04, using OpenLDAP server. I've followed the instructions on the Ubuntu help pages and can happily connect without security. To test my connection, I'm using ldapsearch the command looks like: ldapsearch -xv -H ldap://ldap.[my host].local -b dc=[my domain],dc=local -d8 -ZZ I've also used: ldapsearch -xv -H ldaps://ldap.[my host].local -b dc=[my domain],dc=local -d8 As far as I can tell, I've setup my certificate correctly, but no matter why I try, I can't seem to get ldapsearch to accept my self-signed certificate. So far, I've tried: Updating my /etc/ldap/ldap.conf file to look like: BASE dc=[my domain],dc=local URI ldaps://ldap.[my host].local TLS_CACERT /etc/ssl/certs/cacert.crt TLS_REQCERT allow Updating my /etc/ldap.conf file to look like: base dc=[my domain],dc=local uri ldapi:///ldap.[my host].local uri ldaps:///ldap.[my host].local ldap_version 3 ssl start_tls ssl on tls_checkpeer no TLS_REQCERT allow Updating my /etc/default/slapd to include: SLAPD_SERVICES="ldap:/// ldapi:/// ldaps:///" Several hours of Googling, most of which resulted in adding the TLS_REQCERT allow The exact error I'm seeing is: ldap_initialize( ldap://ldap.[my host].local ) request done: ld 0x20038710 msgid 1 TLS certificate verification: Error, self signed certificate in certificate chain TLS: can't connect. ldap_start_tls: Connect error (-11) additional info: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed After several hours of this, I was hoping someone else has seen this issue, and/or knows how to fix it. Please do let me know if I should add more information, or if you need further data.

  Read the article

• How can I solve the apache2 httpd error "mixing * ports and non-* ports with a NameVirtualHost addre

  - by rrc7cz

  Here is the error I get when booting up Apache2: * Starting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [Wed Oct 21 16:37:26 2009] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Wed Oct 21 16:37:26 2009] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Wed Oct 21 16:37:26 2009] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Wed Oct 21 16:37:26 2009] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Wed Oct 21 16:37:26 2009] [warn] NameVirtualHost *:80 has no VirtualHosts I first followed this guide on setting up Apache to host multiple sites: http://www.debian-administration.org/articles/412 I then found a similar question on ServerFault and tried applying the solution, but it didn't help. Here is an example of my final VirtualHost config: <VirtualHost *:80> ServerAdmin [email protected] ServerName www.xxx.com ServerAlias xxx.com # Indexes + Directory Root. DirectoryIndex index.html DocumentRoot /var/www/www.xxx.com # Logfiles ErrorLog /var/www/www.xxx.com/logs/error.log CustomLog /var/www/www.xxx.com/logs/access.log combined </VirtualHost> with the domain X'd out to protect the innocent :-) Also, I have the conf.d/virtual.conf file mentioned in the guide looking like this: NameVirtualHost * The odd thing is that everything appears to work fine for two of the three sites.

  Read the article

• OpenVpn Iptables Error

  - by Mook

  I mean real newbie - linux here.. Please help me configuring my openvpn through iptables. My main goal here is to open port for regular browsing (80, 443), email (110, 25), etc just like isp does but i want to block p2p traffic. So I will need to open only few port. Here are my iptables config # Flush all current rules from iptables # iptables -F iptables -t nat -F iptables -t mangle -F # # Allow SSH connections on tcp port 22 (or whatever port you want to use) # iptables -A INPUT -p tcp --dport 22 -j ACCEPT # # Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT DROP #using DROP for INPUT is not always recommended. Change to ACCEPT if you prefer. iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # Accept packets belonging to established and related connections # iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # #Accept connections on 1194 for vpn access from clients #Take note that the rule says "UDP", and ensure that your OpenVPN server.conf says UDP too # iptables -A INPUT -p udp --dport 1194 -j ACCEPT # #Apply forwarding for OpenVPN Tunneling # iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT #10.8.0.0 ? Check your OpenVPN server.conf to be sure iptables -A FORWARD -j REJECT iptables -t nat -A POSTROUTING -o venet0 -j SNAT --to-source 100.200.255.256 #Use your OpenVPN server's real external IP here # #Enable forwarding # echo 1 > /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p tcp --dport 25 -j ACCEPT iptables -A INPUT -p tcp --dport 26 -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 110 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -L -v But when I connect to my vpn, i can't browsing and also got RTO on pinging yahoo, etc

  Read the article

• Problem: Munin Graph

  - by Pablo

  I've been trying to install Munin for 15 days, I looked for information, analized logs, I even deleted and reinstalled Munin using YUM. I'm hosted at Media Temple on a VPS with CentOS. The problem is still there and It's driving me nuts. Graphics are shown as following: http://imageshack.us/photo/my-images/833/capturadepantalla201106u.png/ This is the configuration of my munin.conf file dbdir /var/lib/munin htmldir /var/www/munin logdir /var/log/munin rundir /var/run/munin [localhost] address **.**.***.*** #IP VPS This is the configuration of my munin-node.conf file log_level 4 log_file /var/log/munin/munin-node.log port 4949 pid_file /var/run/munin/munin-node.pid background 1 setseid 1 # Which port to bind to; host * user root group root setsid yes # Regexps for files to ignore ignore_file ~$ ignore_file \.bak$ ignore_file %$ ignore_file \.dpkg-(tmp|new|old|dist)$ ignore_file \.rpm(save|new)$ allow ^127\.0\.0\.1$ Thanks so much, I appreciate all the answers UPDATE munin-graph.log Jun 22 16:30:02 - Starting munin-graph Jun 22 16:30:02 - Processing domain: localhost Jun 22 16:30:02 - Graphed service : open_inodes (0.14 sec * 4) Jun 22 16:30:02 - Graphed service : sendmail_mailtraffic (0.10 sec * 4) Jun 22 16:30:02 - Graphed service : apache_processes (0.12 sec * 4) Jun 22 16:30:02 - Graphed service : entropy (0.10 sec * 4) Jun 22 16:30:02 - Graphed service : sendmail_mailstats (0.14 sec * 4) Jun 22 16:30:02 - Graphed service : processes (0.14 sec * 4) Jun 22 16:30:03 - Graphed service : apache_accesses (0.27 sec * 4) Jun 22 16:30:03 - Graphed service : apache_volume (0.15 sec * 4) Jun 22 16:30:03 - Graphed service : df (0.21 sec * 4) Jun 22 16:30:03 - Graphed service : netstat (0.19 sec * 4) Jun 22 16:30:03 - Graphed service : interrupts (0.14 sec * 4) Jun 22 16:30:03 - Graphed service : swap (0.14 sec * 4) Jun 22 16:30:04 - Graphed service : load (0.11 sec * 4) Jun 22 16:30:04 - Graphed service : sendmail_mailqueue (0.13 sec * 4) Jun 22 16:30:04 - Graphed service : cpu (0.21 sec * 4) Jun 22 16:30:04 - Graphed service : df_inode (0.16 sec * 4) Jun 22 16:30:04 - Graphed service : open_files (0.16 sec * 4) Jun 22 16:30:04 - Graphed service : forks (0.13 sec * 4) Jun 22 16:30:05 - Graphed service : memory (0.26 sec * 4) Jun 22 16:30:05 - Graphed service : nfs_client (0.36 sec * 4) Jun 22 16:30:05 - Graphed service : vmstat (0.10 sec * 4) Jun 22 16:30:05 - Processed node: localhost (3.45 sec) Jun 22 16:30:05 - Processed domain: localhost (3.45 sec) Jun 22 16:30:05 - Munin-graph finished (3.46 sec)

  Read the article

• How to set shmall, shmmax, shmni, etc ... in general and for postgresql

  - by jpic

  I've used the documentation from PostgreSQL to set it for example this config: >>> cat /proc/meminfo MemTotal: 16345480 kB MemFree: 1770128 kB Buffers: 382184 kB Cached: 10432632 kB SwapCached: 0 kB Active: 9228324 kB Inactive: 4621264 kB Active(anon): 7019996 kB Inactive(anon): 548528 kB Active(file): 2208328 kB Inactive(file): 4072736 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 3432 kB Writeback: 0 kB AnonPages: 3034588 kB Mapped: 4243720 kB Shmem: 4533752 kB Slab: 481728 kB SReclaimable: 440712 kB SUnreclaim: 41016 kB KernelStack: 1776 kB PageTables: 39208 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 8172740 kB Committed_AS: 14935216 kB VmallocTotal: 34359738367 kB VmallocUsed: 399340 kB VmallocChunk: 34359334908 kB HardwareCorrupted: 0 kB AnonHugePages: 456704 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 12288 kB DirectMap2M: 16680960 kB >>> ipcs -l ------ Shared Memory Limits -------- max number of segments = 4096 max seg size (kbytes) = 4316816 max total shared memory (kbytes) = 4316816 min seg size (bytes) = 1 ------ Semaphore Limits -------- max number of arrays = 128 max semaphores per array = 250 max semaphores system wide = 32000 max ops per semop call = 32 semaphore max value = 32767 ------ Messages Limits -------- max queues system wide = 31918 max size of message (bytes) = 8192 default max size of queue (bytes) = 16384 sysctl.conf extract: kernel.shmall = 1079204 kernel.shmmax = 4420419584 postgresql.conf non defaults: max_connections = 60 # (change requires restart) shared_buffers = 4GB # min 128kB work_mem = 4MB # min 64kB wal_sync_method = open_sync # the default is the first option checkpoint_segments = 16 # in logfile segments, min 1, 16MB each checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0 effective_cache_size = 6GB Is this appropriate ? If not (or not necessarily), in which case would it be appropriate ? We did note nice performance improvements with this config, how would you improve it ? How should kernel memory management parameters be set ? Can anybody explain how to really set them from the ground up ?

  Read the article

• apache2 VirtualHost in Mac OS X home directory

  - by aaron

  I am running Macports apache2 on Mac OS X 10.5. Whenever I configure a virtual host in the default folder, it works, however when I configure the virtual host in my home directory I get a "403 Forbidden" error. How do I configure a vhost in my home directory? Here is the configuration that yields "403 Forbidden" when I access "devel.mysite.com": /opt/local/apache2/conf/extra/httpd-vhosts.conf: DocumentRoot "/opt/local/apache2/htdocs" ServerName * #CustomLog "" common <VirtualHost *:80> #DocumentRoot "/opt/local/apache2/htdocs/mysite" DocumentRoot "/Users/myuser/Sites/mysite" ServerName devel.mysite.com </VirtualHost> The error message in /opt/local/apache2/logs/devel.mysite.com-error_log: [Sat Apr 17 19:54:49 2010] [error] [client 127.0.0.1] client denied by server configuration: /Users/myuser/Sites/mysite/ When I uncomment the line to make DocumentRoot in /opt/local/apache2/htdocs/mysite, it works: DocumentRoot "/opt/local/apache2/htdocs" ServerName * #CustomLog "" common <VirtualHost *:80> DocumentRoot "/opt/local/apache2/htdocs/mysite" #DocumentRoot "/Users/myuser/Sites" ServerName devel.mysite.com </VirtualHost> I get no errors or warnings when I start apache, and the only thing that is logged on startup is this (in /opt/local/apache/logs/error_log): [Sat Apr 17 19:56:29 2010] [notice] Digest: generating secret for digest authentication ... [Sat Apr 17 19:56:29 2010] [notice] Digest: done [Sat Apr 17 19:56:29 2010] [notice] Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8m DAV/2 configured -- resuming normal operations A few notes: * The permissions of /Home/myuser/Sites/mysite is 755, owned by myuser, group is staff * Everything else works as expected, until I move the ServerRoot of the vhost to the directory in my home

  Read the article

• snmpd dead but subsys locked

  - by Hina NMS

  Hi folks I have an NMS and a Client machine. I want the client to send traps to the NMS. I have been configuring the snmpd.conf file testing if i disable a process do i receive an alert or not. For the changes to reflect that were made in the conf file i restarted the snmpd daemon each time. The testing was going fine. All of a sudden when i restarted snmpd i recieved the error msg "snmpd dead but subsys locked". I googled for answer as to what it actually meant and found out that when a service is started a logfile is created in the /var/lock/subsys. Sometimes if the service is not stopped properly or whatever the logfile remains created. Though i started/stopped the snmpd service properly it didnt go away so i removed the file manually (via rm cmd). when i checked the status the error "snmpd dead but subsys locked" was gone. On my NMS i recieved the alert of snmpd coldstart. i started the snmpd service everything goes fine! BUT after 5 mins again i recieve the same error message and this keeps on happening..what do i need to do now?

  Read the article

• Troubles installing/starting Redis via Resque

  - by Craig Flannagan

  Trying to complete instructions for Resque/Redis installation here: https://github.com/defunkt/resque/blob/master/README.markdown Am stuck at where I'm trying to start up Redis via Resque at the following command: Craig:/usr/local/src/resque$ rake redis:start (in /usr/local/src/resque) Detach with Ctrl+\ Re-attach with rake redis:attach ../../bin/dtach -A /tmp/redis.dtach ../../bin/redis-server ../../../etc/redis.conf rake aborted! Command failed with status (127): [../../bin/dtach -A /tmp/redis.dtach ../../...] (See full trace by running task with --trace) Rerunning with --trace (showing only part of trace): Craig:/usr/local/src/resque$ rake redis:start --trace (in /usr/local/src/resque) ** Invoke redis:start (first_time) ** Execute redis:start Detach with Ctrl+\ Re-attach with rake redis:attach ../../bin/dtach -A /tmp/redis.dtach ../../bin/redis-server ../../../etc/redis.conf rake aborted! Command failed with status (127): [../../bin/dtach -A /tmp/redis.dtach ../../...] /Users/craigflannagan/.rvm/gems/ruby-1.9.2-head@foo/gems/rake-0.8.7/lib/rake.rb:995:in `block in sh' Not sure what is wrong here - by the way, when I did those instructions $ git clone git://github.com/defunkt/resque.git $ cd resque $ PREFIX=<your_prefix> rake redis:install dtach:install $ rake redis:start I wasn't sure whether or not I was supposed to be doing #1 from within the Rails project, or if I was supposed to have the git clone create a new folder outside the Rails project (in this case, I chose to have folder created outside the project).

  Read the article

• Mod_Proxy_AJP set up issues

  - by TripWired

  I'm trying to set up Tomcat behind Apache using mod_proxy_ajp. After tons of messing around with the configs I am stuck at a 403 page when trying to access tomcat. I had a 404 before but apparently something I changed along the way fixed that. I'm not sure which setting to change at this point. Could anyone look over the configs I have and see if anything is missing. httpd.conf <IfModule mod_proxy.c> ProxyRequests Off <Proxy *> Order deny,allow Deny from all Allow from localhost </Proxy> proxy_ajp.conf LoadModule proxy_ajp_module modules/mod_proxy_ajp.so # # When loaded, the mod_proxy_ajp module adds support for # proxying to an AJP/1.3 backend server (such as Tomcat). # To proxy to an AJP backend, use the "ajp://" URI scheme; # Tomcat is configured to listen on port 8009 for AJP requests # by default. # # # Uncomment the following lines to serve the ROOT webapp # under the /tomcat/ location, and the jsp-examples webapp # under the /examples/ location. # ProxyPass /tomcat ajp://127.0.0.1:8009/ ProxyPassReverse /tomcat ajp://127.0.0.1:8009/ ProxyPass /examples/ ajp://localhost:8009/jsp-examples/

  Read the article

• VMware Fusion configuration files missing

  - by jdmuys

  I need to set up port forwarding to my VM in Fusion 5. Everywhere on the net, the solution is described as editing the file: /Library/Application Support/VMware Fusion/vmnet8/nat.conf However, on my install, that file doesn't exist. Neither does the vmnet8 directory. Here is the full content of VMware stuff I have in /Library/Application Support/: /Library/Application Support/ VMware/ VMware Fusion AdminWritable Shared vmInventory usbarb.rules VMware Fusion That's right: /Library/Application Support/VMware Fusion/ exists but is empty. And there is no VMware folder in other Library directories on my system. I am running OS X 10.8.2. I just reinstalled Fusion 5.02, no change. Meanwhile, I have 3 VMs that work just fine. So how am I supposed to set up port forwarding with Fusion 5? Thanks, JD Edit: in a hunch, I tried ps ax | grep natd which returned: 9646 ?? S 0:00.01 /Applications/VMware Fusion.app/Contents/Library/vmnet-natd -s 7 -m /Library/Preferences/VMware Fusion/vmnet8/nat.mac -c /Library/Preferences/VMware Fusion/vmnet8/nat.conf So it seems that the configurations files are now in the directory /Library/Preferences/VMware Fusion. I'll work from here and edit this question as I make progress.

  Read the article

• Apache2 config problem

  - by Hellnar

  For using my Debian VPS for multiple domains , I did such actions: removed the default one from sites-enabled/ and sites-available/ (config and the symbolic link) and I added this under sites-available/www.mysite.com : <VirtualHost MYIP:80> ServerName mysite.com ServerAlias www.mysite.com Alias /media/ /home/myuser/mysite/media/ Alias /admin_media/ /home/myuser/django/Django-1.2/django/contrib/admin/media/ WSGIScriptAlias / /home/myuser/mysite/wsgi.py ErrorLog /home/myuser/mysite/logs/error.log CustomLog /home/myuser/mysite/logs/access.log combined </VirtualHost> And I have changed my ports.conf to: NameVirtualHost MYIP:80 Listen 80 <IfModule mod_ssl.c> # SSL name based virtual hosts are not yet supported, therefore no # NameVirtualHost statement here Listen 443 </IfModule> Lastly I enabled the new domain via the command: a2ensite www.mysite.com After restart I get this error: myuser:~# /etc/init.d/apache2 restart Restarting web server: apache2apache2: Syntax error on line 281 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/sites-enabled/www.birertek.com: /etc/apache2/sites-enabled/www.birertek.com:1: <VirtualHost> was not closed. failed! Please help this poor soul.

  Read the article

• Installing multiple php versions plus extensions on freebsd

  - by jgtumusiime

  I'm a currently learning how to work with freebsd. Lately I have been trying to run multiple php versions along with their respective packages. However, I seem to be running into issues while making installations. The default location for my php installation is /usr/local/etc/, however I want to be able to install php5.2, php5.3 and php5.4 in /usr/local/etc/php52, /usr/local/etc/php53 and /usr/local/etc/php54 respectively. Using ports I simply achieved this by doing cd /usr/ports/lang/php5x && make PREFIX="/usr/local/etc/php5x" install clean. The problem now is: How do I do the same for extensions of all my PHP versions? When I try installing php-extensions like so: cd /usr/ports/lang/php5x-extension && make PREFIX="/usr/local/etc/php5x/lib/php" install clean, I get this error ... ===> PHPizing for php53-bcmath-5.3.17 env: /usr/local/bin/phpize: No such file or directory *** Error code 127 Stop in /usr/ports/math/php53-bcmath. *** Error code 1 Stop in /usr/ports/lang/php53-extensions. My PHPize is located in /usr/local/etc/php5x/bin/phpize So how do I get make or whatever to look for phpize in the right path? Is there a cleaner, may be simpler way of maintaining multiple php installations? I need to achieve this because of compatibility issues from some legacy code that runs on 5.2 and breaks on 5.3. Thank you. ================= So I successfully installed an configured freebsd jail and I would like to install software within my jail but I cannot connect to the network. Here is my rc.conf jail_enable="YES" # Set to NO to disable starting of any jails jail_list="mambo2" # Space separated list of names of jails jail_mambo2_rootdir="/usr/jails/j01" # jail's root directory jail_mambo2_hostname="mambo2.ug" # jail's hostname jail_mambo2_ip="192.168.100.174" # jail's IP address jail_mambo2_devfs_enable="YES" # mount devfs in the jail jail_mambo2_devfs_ruleset="mambo2_ruleset" # devfs ruleset to apply to jail here is my jail ifconfig output mambo2# ifconfig rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:c1:28:00:48:db media: Ethernet autoselect (100baseTX <full-duplex>) status: active plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 mambo2# I created a /etc/resolv.conf for nameservers mambo2# cat /etc/resolv.conf nameserver 192.168.100.251 nameserver 8.8.8.8 mambo2# Here is a list of jails running [root@mambo /usr/home/jtumusiime]# jls JID IP Address Hostname Path 5 192.168.100.174 mambo2.ug /usr/jails/j01 my host has 4 ip addresses, 3 public and one private: 192.168.100.173 I tried creating a jail using ezjail and this does not work out. [root@mambo /usr/home/jtumusiime]# ezjail-admin update -p -i Error: Cannot find your copy of the FreeBSD source tree in . Consider using 'ezjail-admin install' to create the base jail from an ftp server. [root@mambo /usr/home/jtumusiime]# I have an updated copy of freebsd 7.1 source in /usr/src/ and I did #make buildworld while building the first jail mambo2 Here is an excerpt of ouput of ezjail-admin install ... 221 Goodbye. Trying 193.162.146.4... Connected to ftp.freebsd.org. 220 ftp.beastie.tdk.net FTP server (Version 6.00LS) ready. 331 Guest login ok, send your email address as password. 230 Guest login ok, access restrictions apply. Remote system type is UNIX. Using binary mode to transfer files. 200 Type set to I. 550 pub/FreeBSD-Archive/old-releases/i386/7.1-RELEASE/base: No such file or directory. 221 Goodbye. Could not fetch base from ftp.freebsd.org. Maybe your release (7.1-RELEASE) is specified incorrectly or the host ftp.freebsd.org does not provide that release build. Use the -r option to specify an existing release or the -h option to specify an alternative ftp server. Querying your ftp-server... The ftp server you specified (ftp.freebsd.org) seems to provide the following builds: Trying 193.162.146.4... total 10 drwxrwxr-x 13 1006 1006 512 Feb 20 2011 8.2-RELEASE drwxrwxr-x 13 1006 1006 512 Apr 10 2012 8.3-RELEASE lrwxr-xr-x 1 1006 1006 16 Jan 7 2012 9.0-RELEASE -> i386/9.0-RELEASE drwxrwxr-x 7 1006 1006 1024 Feb 19 2012 ISO-IMAGES -rw-rw-r-- 1 1006 1006 637 Nov 23 2005 README.TXT drwxrwxr-x 5 1006 1006 512 Nov 2 02:59 i386 I do not want to upgrade my freebsd installation. I have googled around; but all on vail

  Read the article

• Unable to get defined path in 'source' type on AIX node

  - by haris

  hi all, I am trying to create a set of users on my AIX node and trying to get their authorized_keys which are already hosted on my server with name like, 'myuser_id_dsa.pub'. Currently i am managing 2 nodes (1. SLES 2. AIX). I defined the 'source' file paths in 2 separate contexts in fileserver.conf; [AIX] path myfiles/users/ssh/ allow *.another.mydomain.com [SLES] path myfiles/users/keys/ssh/ allow *.mydomain.com but when I run puppet then it ended successfully on my SLES node but encountered failure on AIX; with following err; /* Could not describe /AIX/myuser_id_rsa.pub: Fileserver module 'AIX' not mounted*/ in my code i have defined the 'source' with $filserver variable as: case $operatingsystem { "AIX": { $fileserver = "AIX" } default: { $fileserver = "SLES" } } file { "${home}/${username}/.ssh/authorized_keys": source = "puppet:///$fileserver/${username}_is_dsa.pub", ... ... } why AIX is not able to get the source path from my fileserver.conf while SLES is running absolutely fine? and how can I do it? I have to run similar configuration across different servers so I can only deal it with case statement. looking forward for your help Thanks

  Read the article

• Apache2 Enabling Includes module causes svn access to quit working

  - by Matthew Talbert

  I have dav_svn installed to provide http access to my svn repos. The url is directly under root, eg mywebsite.com/svn/individual-repo. This setup has been working great for some time. Now, I need SSI (server-side includes) for a project, so I enabled this module with a2enmod include. Now, tortoisesvn can't access the repo; it always returns a 301 permanent redirect. Some playing with it reveals I can access it in a browser if I'm sure to include the trailing / but it still doesn't work in TortoiseSVN. I've looked at all of the faq's for this problem with TortoiseSVN and apache, and none of them seem to apply to my problem. Anyone have any insight into this problem? I'm running Ubuntu 9.10 with Apache 2.2.12. The only change I've made to my configuration is to enable the includes mod. Here's my dav_svn conf: <Location /svn> DAV svn SVNParentPath /home/matthew/svn AuthType Basic AuthName "Subversion repository" AuthUserFile /etc/subversion/passwd Require valid-user </Location> and here's the relevant part of my virtual host conf: <Location /svn> SetHandler None Order allow,deny Allow from all </Location> Edit: OK, I've discovered that the real conflict is between the include module and basic authentication. That is, if I disable the include module, browse to the subversion repo, enter my user/pass for the basic authentication, I can browse it just fine. It even continues to work after I re-enable the include module. However, if I browse with another browser where I'm not already authenticated, then it no longer works.

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >