Search Results

Search found 3096 results on 124 pages for 'scope creep'.

Page 68/124 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• DHCP for Multiple Subnets

  - by TheD

  So this is the current setup - essentially I would like to get my DHCP server, serving DHCP requests for two seperate subnets. Netgear DG834G acting as a modem connected to a Sonicwall Pro 2040. X0 - LAN - 192.168.1.0/24 X1 - WAN - <WAN-IP> X2 - WLAN - 192.168.10.0/24 At the moment, I have a 2008R2 server with DHCP installed, with an IP address on the 192.168.1.0/24 range handling DHCP fine for this subnet. The Sonicwall is configured correctly - anything connected to the WLAN has Full Allow to anything in the LAN, and vice versa but it will not lease an IP from my Server. I've also added another IP address to the server, so the physical NIC now has two IP's: 192.168.1.2 and 192.168.10.2 with a DHCP scope configured for each. Still no luck! Any ideas? Thanks!

  Read the article

• Dnsmasq offering IP via DHCP, but nobody is accepting

  - by Matt

  As clients connect the logs light up with DHCPDISCOVER(wlan0) and DHCPOFFER(wlan0) but the IPs being offered are not being accepted. Currently dnsmasq offers IPs on eth1 which works flawlessly. It seems to be just wlan0 that poses this problem for me today. ifconfig of wlan0: wlan0 Link encap:Ethernet HWaddr aa:aa:aa:aa:aa:aa inet addr:10.0.0.2 Bcast:10.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::baa3:86ff:fe70:796a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1609 errors:0 dropped:0 overruns:0 frame:0 TX packets:1268 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:308739 (301.5 KiB) TX bytes:319185 (311.7 KiB)

  Read the article

• Hiera + Puppet classes

  - by Amadan

  I'm trying to figure out Puppet (3.0) and how it relates to built-in Hiera. So this is what I tried, an extremely simple example (I'll make a more complex hierarchy when I manage to get the simple one working): # /etc/puppet/hiera.yaml :backends: - yaml :hierarchy: - common :yaml: :datadir: /etc/puppet/hieradata # /etc/puppet/hieradata/common.yaml test::param: value # /etc/puppet/modules/test/manifests/init.pp class test ($param) { notice($param) } # /etc/puppet/manifests/site.pp include test If I directly apply it, it's fine: $ puppet apply /etc/puppet/manifests/site.pp Scope(Class[Test]): value If I go through puppet master, it's not fine: $ puppet agent --test Could not retrieve catalog from remote server: Error 400 on SERVER: Must pass param to Class[Test] at /etc/puppet/manifests/site.pp:1 on node <nodename> What am I missing? EDIT: I just left the office but a thought struck me: I should probably restart puppet master so it can see the new hiera.conf. I'll try that on Monday; in the meantime, if anyone figures out some not-it problem, I'd appreciate it :)

  Read the article

• I can search users and site... but it will not search a blog that i use to view on my posted site fo

  - by Don

  I have always been able to search my blog where i post howtos for our company... However now i can only search for mysites or sites... when i click on a blog site that I created for Company Howtos i try to use the Search: This Site: "name of yhour site" click search i get the following No results matching your search were found. Check your spelling. Are the words in your query spelled correctly? Try using synonyms. Maybe what you're looking for uses slightly different words. Make your search more general. Try more general terms in place of specific ones. Try your search in a different scope. Different scopes can have different results. I have tried to do the following: 1) net stop osearch 2) net start osearch 3) iisreset /noforce ~ Please help! Don

  Read the article

• Forward Hostname via my router to another PC for debugging

  - by Markive

  Hi, My web service runs on for example: http://mydomain.com/mywebservice.asmx. This works great, but I have a PDA application which I want to debug it synchronising through this web service. Currently the only way I can do this is to debug the webservice running on the actual server which is far from ideal. What I would like to do is for any device connecting on my wireless network, if it requests mywebservice.asmx for this to forward the request to my development PC and for IIS to then handle the request and allow me to debug in Visual Studio. So device on the network that requests the hostname: mywebservice.asmx will his this PC.. I am at a loss to set this up on my router (Zoom ADSL X6), this is massively out of my scope but any help would be much appreciated

  Read the article

• SharePoint 2010 deployment problem after added a new server to existing farm

  - by mrt

  I have SharePoint 2010 farm with one server. I'm developing some features in a sharepoint farm solution (not sandbox because there are some user rights problem). All feature scopes are set to "Site". I can deploy the solution to SharePoint with no problem. I added a new web front-end server to my existing farm. Then when I try deploy my solution, VS2010 shows this error: Error occurred in deployment step 'Activate Features': Feature with Id 'xxx' is not installed in this farm, and cannot be added to this scope I login with AD administrator account to development server. Administrator account is in site collection admins on the target web application. The farm account is in local administrators group. Is there a solution for this error?

  Read the article

• Git for Application Settings

  - by devians

  I use a lot of tools at work and at home, and im constantly tweaking them in one location or the other. It's somewhat common practice for people to use Git to version their .vim, .vimrc, and other . files, since you can host your config files on github and have the share-ability and all the other advantages that implies. Being able to version and branch my configs sounds like a grand idea, since I'm always messing about with them. I'd like to discuss the best practice for doing this on a slightly wider scope. How would you implement it? Have your configfiles repo in ~/Library/Configs or similar, and symlink the appropriate files? How to handle preference files for Applications, ie iTerm2. These files are recreated every time, so you'd have to symlink 'backwards' and put a link in the repo? rather than symlinking to the repo, since it would just delete the symlink.

  Read the article

• how to separate a network for traffic

  - by Student_CVO

  At the moment our all computers in one big LAN, it is the intention to separate the admin and edu (it's in a school) especially for traffic and less for security. How do this best? I have a drawing, but can't post it (a can send it in a mail) Firewall?, VLAN?, IPCop (no two green zones)?, pfsense? ... Should there be two scopes on the dhcp server (WIN 2008 R2), one for admin and one for edu or is one scope enough? I would like your advice, I am a student in training with this task as a project. Thanks

  Read the article

• how to change interface ip in ifconfig with /etc/network/interfaces

  - by user2478348

  Hi everybody when modifiying /etc/network/interfaces, saving it and then executing ifconfig i can't see the modification i made..for example here is part of my /etc/network/interfaces: auto wlan1 iface wlan1 inet static address 192.168.0.60 netmask 255.255.255.0 gateway 192.168.0.61 you can see that the IP address of my wlan1 is 192.168.0.60 but when typing ifconfig i have this: wlan1 Link encap:Ethernet HWaddr 00:19:70:0f:c2:9c inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::219:70ff:fe0f:c29c/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:758 erreurs:0 :0 overruns:0 frame:0 TX packets:610 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:73490 (73.4 KB) Octets transmis:127883 (127.8 KB) (the inet adr:192.168.0.1 and not 198.168.0.60)..if someone can help me I'll be very thankful :)

  Read the article

• Request Multiple Maya Floating Server Licenses for extra Satellite clients

  - by Rob

  Hello all: I am currently setting up a 'render farm' for Maya 2008 Unlimited. One Maya workstation license comes with the ability to render on eight satellite nodes. It works perfect, the remote rendering works like a charm. However, we have additional boxes to set up as satellite rendering nodes, and we have extra Maya workstation licenses. Ideally, the workstation can take two licenses and thus render on 16 nodes, but I haven't been able to figure it out, or determine if it is actually possible. It's a big project, where rendering the entire thing is in the scope of weeks, so the speed up would be worth it. Any thoughts?

  Read the article

• Routing using Linux with 2 NIC cards

  - by Kevin Parker

  Configured Clear OS to be in Gateway mode on a machine with two NIC cards. eth0:192.168.2.0/24 with ip 192.168.2.27 which is connected to a modem and thus have internet connectivity. eth1:192.168.122.0/24 with ip 192.168.122.10 which is connected to other machines in LAN through switch. LAN machines with network 192.168.122.0 is not getting internet.How can they get internet Through Clear OS gateway.I have enabled packet forwarding in clear os using "ip_forward=1" What am i missing?.Can you please help me in this. Following are the static routing i have added: on LAN machine1 with ip address 192.168.122.11 ip route add 192.168.2.0/24 via 192.168.122.10 dev eth0 ip route show 192.168.2.0/24 via 192.168.122.10 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.11 But still 192.168.2.0/24 network is not reachable.Where can be the problem??

  Read the article

• Why is Server 2012 assigning "169.254.*.*" series when creating DHCP server?

  - by Seth

  I have a small office, with ATT Motorola modem (192.168.1.254) set as passthrough to Dlink DIR-815 (LAN 192.168.0.1) I am trying to setup DHCP server on Server 2012, and when I create new DHCP server, the title is created as 169.254.. instead of the domain name. (Domain clients can retrieve IP's as defined in the scope) Non-domain clients are not receiving IP's from the server but rather the Motorola... How do I assure DHCP setup is properly creating itself, and how do I make sure domain and non-domain clients get IP's from the server?

  Read the article

• Ping6 fail on linux

  - by michelemarcon

  I have 2 linux box configured with IPv4. I have tried adding IPv6 to them. I have issued this commands on box1: ip -6 addr add fd32:2d7f:f3c1::1/48 dev eth0 And I get this: inet6 addr: fd32:2d7f:f3c1::1/48 Scope:Global Then I have issued this command on box2: ip -6 addr add fd32:2d7f:f3c2::1/48 dev eth0 Back on box1 (command/response): ping6 fd32:2d7f:f3c1::1 is alive! ping6 fd32:2d7f:f3c2::1 ping6: sendto: Network is unreachable Why doesn't box1 ping box2 (of course, also box2 can't ping box1)?

  Read the article

• Have Free website Hosting with Google App Engine

  - by mickthompson

  I'm reading about Google App Engine. I'm creating a bunch of simple dynamic websites in java. I'm considering to use Google App Engine and setup my clients' website on it. In this way I've only to register a domain www.myclietdomain.com and then point that to the GoogleAppEngine application... In this way I plan to avoid hosting costs. Infact I'm paying even for hosting few static html pages... Do you think that is possible to use Google App Engine for this scope?

  Read the article

• Is it possible to do a web search filtered for the user's comprehension level? [migrated]

  - by Tim

  Do any of the major search engines support a filter to indicate the comprehension level of the user and thus to filter out content beyond their scope? So for example, if someone wanted to find results on "astronomy", but to only show content appropriate for someone in junior-high or lower. Alternatively, if there isn't such an existing method directly, any ideas on how this might be accomplished with existing tools? I found this paper, which seems to indicate folks have looked at this, just don't know if there is a real world tool to do this.

  Read the article

• Win 2008 Server configuration

  - by user123790

  Let me preface my question by saying I'm a novice in regards to server configuration. It's been 12+ years since I've attempted this. What we (our small office) are trying to achieve is to setup a Win 2008 server (located in a home) in a home network configuration (basic wireless router w/DHCP) that we (the office) can VPN to from our office. I have installed the software, installed DHCP, removed DHCP from the router, set the scope for 100 IPs and am now looking for information as to where I go from here? I believe I need to configure DNS and possibly set up static routes on the router for the home devices that need internet? The wireless clients are not receiving IPs is the current issue that I'd like to tackle. Also, would it be feasible to use the router's DHCP to assign IPs rather than having the server do it? If so, what would be the most direct way to accomplish this? I appreciate any help in this matter. Thanks

  Read the article

• Wrong version of php used be IIS

  - by user1070125

  Long ago I installed php5.2 using a installer on IIS. Recently I installed PHP Manager and upgraded to php5.3 simly by unzipping the downloaded file and then used the "Register new php version" in PHP Manager. I did this for the global scope for all sites. This works OK. Once in a blue moon errors are written to the php5.2 errorlog even though that verion is not used anymore. The errors are typical 5.3 specfic functions that are not supported in 5.2. How can it be? Can I safely uninstall php5.2 using the uninstaller (i think it added some stuff to the env paths)?

  Read the article

• Unable to change IP address for eth0 without restart in Ubuntu

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I tried to change the IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4 auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status When I issue: sudo service networking restart I get this response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart does the IP change. Any ideas?

  Read the article

• Manually Add the TortoiseSVN Registry information?

  - by Pete Michaud

  I recently installed TortoiseSVN on my Windows 7 64 bit computer. For reasons outside the scope of this question, the installer could not get appropriate permissions to add the keys that TSVN needs in the registry. I'd like to add those keys manually, with a reg file. I tried unzipping the .msi installer to see if the .reg file was there, but no luck. I looked around the net a little, but no luck. I looked in the source code, figuring there must be a file in there somewhere with a list of all the registry changes in one place, but I haven't found any such thing. How can I get a complete list of registry changes for a fresh TortoiseSVN installation?

  Read the article

• Unable chage IP address for eth0 without restart in Ubunto

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I try to change IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4: auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status Now I issue: sudo service networking restart I have response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart IP changing... Any ideas?

  Read the article

• SBS 2003 CEICW - Multiple IP's causing error

  - by mushmush

  two IP adresses (different subnets) are assigned to one networkcard. In the Properties window the order is right, however the Server always picks the wrong one as the "default ip". This causes CEICW to fail with an "The DHCP Server service is started, but the DHCP scope does not match the network address of the server's local area network (LAN) adapter." error. The DHCP Server is installed and configured, but not for the other subnet as it is not needed. If i remove the other subnets IP everything works fine. Is there any way around that without temporarily removing the IP adress or configuring DHCP for one more Subnet?

  Read the article

• Exchange Online - granting admin rights on a multi-domain account

  - by user1571299

  I'm the admin of a handful of domains on Office 365. The thing is some of my clients would like to manage their mailboxes by themselves. So I started looking into it and the closest I got was this page: http://community.office365.com/en-us/forums/158/p/20912/98083.aspx I created a Group Role with a Write Scope according to that post. I also assigned the Reset Password, Recipiants Creation, Mail Recipients and Distribution Groups rolls. But unfortunately that just doesnt work. The user in question is still unable to manage anything. Any suggestions?

  Read the article

• Bonding and default gateway problem (CentOS)

  - by lg

  I configured network bonding on two machine with centos 5.5. Bonding works well, but the problem is default gateway: it is not configured! I follow this tutorial. I added GATEWAY in both (and either) /etc/sysconfig/network and /etc/sysconfig/network-scripts/ifcfg-bond0. But, when I restart network (or server) there is no default gateway (route command). This is ip route ls output after network restart: 10.0.0.0/16 dev bond0 proto kernel scope link src 10.0.0.88 Where is my mistake?

  Read the article

• Folder redirect policy does not apply to one user

  - by Yoffe

  I'm running Windows Server 2008 R2, my station runs Windows 7. while defining folder redirection policy (and others) I find that the redirection does not apply (or appear) in rsop.msc checkout. First thing I've checked is restrictions on the folders where the My Documents folder will be redirected to, I have set full rights for my user on those folders (on the server), and yet I get no actual result. Eventually I decided to add my specific user to the scope under the Folder Redirection policy, and well - still nothing... Would love some clue about what can be wrong.

  Read the article

• Cisco WLAN Controller not pushing out DHCP addresses, what else could it be?

  - by Name

  On our Cisco WLAN Controller web interfaces, in Controller Interfaces, I have made a new interface with these settings: VLAN Identifier 202 IP Address 172.16.202.1 Netmask 255.255.255.0 Gateway 172.16.202.254 Primary DHCP Server 172.16.100.3 Secondary DHCP Server 172.16.100.2 Port: LAG I've also made a new WLAN and assigned it to the above interface. I have saved changes. But our wireless devices, although they seem to authenticate with the WLAN fine, they always get stuck on "obtaining DHCP address", so it seems the WLAN Controller isn't pushing out DHCP addresses to our devices. We do have a DHCP scope for the above in Windows Server 2008 R2 and everything there seems fine. If I connect a device with a static address (e.g. 172.16.202.10), it will connect. Stuck on what to do :(

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >