Search Results

Search found 1778 results on 72 pages for 'shortcut'.

Page 68/72 | < Previous Page | 64 65 66 67 68 69 70 71 72 | Next Page >

How to configure VPN in Windows XP

- by SAMIR BHOGAYTA

VPN Overview A VPN is a private network created over a public one. It’s done with encryption, this way, your data is encapsulated and secure in transit – this creates the ‘virtual’ tunnel. A VPN is a method of connecting to a private network by a public network like the Internet. An internet connection in a company is common. An Internet connection in a Home is common too. With both of these, you could create an encrypted tunnel between them and pass traffic, safely - securely. If you want to create a VPN connection you will have to use encryption to make sure that others cannot intercept the data in transit while traversing the Internet. Windows XP provides a certain level of security by using Point-to-Point Tunneling Protocol (PPTP) or Layer Two Tunneling Protocol (L2TP). They are both considered tunneling protocols – simply because they create that virtual tunnel just discussed, by applying encryption. Configure a VPN with XP If you want to configure a VPN connection from a Windows XP client computer you only need what comes with the Operating System itself, it's all built right in. To set up a connection to a VPN, do the following: 1. On the computer that is running Windows XP, confirm that the connection to the Internet is correctly configured. • You can try to browse the internet • Ping a known host on the Internet, like yahoo.com, something that isn’t blocking ICMP 2. Click Start, and then click Control Panel. 3. In Control Panel, double click Network Connections 4. Click Create a new connection in the Network Tasks task pad 5. In the Network Connection Wizard, click Next. 6. Click Connect to the network at my workplace, and then click Next. 7. Click Virtual Private Network connection, and then click Next. 8. If you are prompted, you need to select whether you will use a dialup connection or if you have a dedicated connection to the Internet either via Cable, DSL, T1, Satellite, etc. Click Next. 9. Type a host name, IP or any other description you would like to appear in the Network Connections area. You can change this later if you want. Click Next. 10. Type the host name or the Internet Protocol (IP) address of the computer that you want to connect to, and then click Next. 11. You may be asked if you want to use a Smart Card or not. 12. You are just about done, the rest of the screens just verify your connection, click Next. 13. Click to select the Add a shortcut to this connection to my desktop check box if you want one, if not, then leave it unchecked and click finish. 14. You are now done making your connection, but by default, it may try to connect. You can either try the connection now if you know its valid, if not, then just close it down for now. 15. In the Network Connections window, right-click the new connection and select properties. Let’s take a look at how you can customize this connection before it’s used. 16. The first tab you will see if the General Tab. This only covers the name of the connection, which you can also rename from the Network Connection dialog box by right clicking the connection and selecting to rename it. You can also configure a First connect, which means that Windows can connect the public network (like the Internet) before starting to attempt the ‘VPN’ connection. This is a perfect example as to when you would have configured the dialup connection; this would have been the first thing that you would have to do. It's simple, you have to be connected to the Internet first before you can encrypt and send data over it. This setting makes sure that this is a reality for you. 17. The next tab is the Options Tab. It is The Options tab has a lot you can configure in it. For one, you have the option to connect to a Windows Domain, if you select this check box (unchecked by default), then your VPN client will request Windows logon domain information while starting to work up the VPN connection. Also, you have options here for redialing. Redial attempts are configured here if you are using a dial up connection to get to the Internet. It is very handy to redial if the line is dropped as dropped lines are very common. 18. The next tab is the Security Tab. This is where you would configure basic security for the VPN client. This is where you would set any advanced IPSec configurations other security protocols as well as requiring encryption and credentials. 19. The next tab is the Networking Tab. This is where you can select what networking items are used by this VPN connection. 20. The Last tab is the Advanced Tab. This is where you can configure options for configuring a firewall, and/or sharing. Connecting to Corporate Now that you have your XP VPN client all set up and ready, the next step is to attempt a connection to the Remote Access or VPN server set up at the corporate office. To use the connection follow these simple steps. To open the client again, go back to the Network Connections dialog box. 1. One you are in the Network Connection dialog box, double-click, or right click and select ‘Connect’ from the menu – this will initiate the connection to the corporate office. 2. Type your user name and password, and then click Connect. Properties bring you back to what we just discussed in this article, all the global settings for the VPN client you are using. 3. To disconnect from a VPN connection, right-click the icon for the connection, and then click “Disconnect” Summary In this article we covered the basics of building a VPN connection using Windows XP. This is very handy when you have a VPN device but don’t have the ‘client’ that may come with it. If the VPN Server doesn’t use highly proprietary protocols, then you can use the XP client to connect with. In a future article I will get into the nuts and bolts of both IPSec and more detail on how to configure the advanced options in the Security tab of this client. 678: The remote computer did not respond. 930: The authentication server did not respond to authentication requests in a timely fashion. 800: Unable to establish the VPN connection. 623: The system could not find the phone book entry for this connection. 720: A connection to the remote computer could not be established. More on : http://www.windowsecurity.com/articles/Configure-VPN-Connection-Windows-XP.html

Read the article
SQL SERVER – Weekly Series – Memory Lane – #052

- by Pinal Dave

Let us continue with the final episode of the Memory Lane Series. Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Set Server Level FILLFACTOR Using T-SQL Script Specifies a percentage that indicates how full the Database Engine should make the leaf level of each index page during index creation or alteration. fillfactor must be an integer value from 1 to 100. The default is 0. Limitation of Online Index Rebuld Operation Online operation means when online operations are happening in the database are in normal operational condition, the processes which are participating in online operations does not require exclusive access to the database. Get Permissions of My Username / Userlogin on Server / Database A few days ago, I was invited to one of the largest database company. I was asked to review database schema and propose changes to it. There was special username or user logic was created for me, so I can review their database. I was very much interested to know what kind of permissions I was assigned per server level and database level. I did not feel like asking Sr. DBA the question about permissions. Simple Example of WHILE Loop With CONTINUE and BREAK Keywords This question is one of those questions which is very simple and most of the users get it correct, however few users find it confusing for the first time. I have tried to explain the usage of simple WHILE loop in the first example. BREAK keyword will exit the stop the while loop and control is moved to the next statement after the while loop. CONTINUE keyword skips all the statement after its execution and control is sent to the first statement of while loop. Forced Parameterization and Simple Parameterization – T-SQL and SSMS When the PARAMETERIZATION option is set to FORCED, any literal value that appears in a SELECT, INSERT, UPDATE or DELETE statement is converted to a parameter during query compilation. When the PARAMETERIZATION database option is SET to SIMPLE, the SQL Server query optimizer may choose to parameterize the queries. 2008 Transaction and Local Variables – Swap Variables – Update All At Once Concept Summary : Transaction have no effect over memory variables. When UPDATE statement is applied over any table (physical or memory) all the updates are applied at one time together when the statement is committed. First of all I suggest that you read the article listed above about the effect of transaction on local variant. As seen there local variables are independent of any transaction effect. Simulate INNER JOIN using LEFT JOIN statement – Performance Analysis Just a day ago, while I was working with JOINs I find one interesting observation, which has prompted me to create following example. Before we continue further let me make very clear that INNER JOIN should be used where it cannot be used and simulating INNER JOIN using any other JOINs will degrade the performance. If there are scopes to convert any OUTER JOIN to INNER JOIN it should be done with priority. 2009 Introduction to Business Intelligence – Important Terms & Definitions Business intelligence (BI) is a broad category of application programs and technologies for gathering, storing, analyzing, and providing access to data from various data sources, thus providing enterprise users with reliable and timely information and analysis for improved decision making. Difference Between Candidate Keys and Primary Key Candidate Key – A Candidate Key can be any column or a combination of columns that can qualify as unique key in database. There can be multiple Candidate Keys in one table. Each Candidate Key can qualify as Primary Key. Primary Key – A Primary Key is a column or a combination of columns that uniquely identify a record. Only one Candidate Key can be Primary Key. 2010 Taking Multiple Backup of Database in Single Command – Mirrored Database Backup I recently had a very interesting experience. In one of my recent consultancy works, I was told by our client that they are going to take the backup of the database and will also a copy of it at the same time. I expressed that it was surely possible if they were going to use a mirror command. In addition, they told me that whenever they take two copies of the database, the size of the database, is always reduced. Now this was something not clear to me, I said it was not possible and so I asked them to show me the script. Corrupted Backup File and Unsuccessful Restore The CTO, who was also present at the location, got very upset with this situation. He then asked when the last successful restore test was done. As expected, the answer was NEVER.There were no successful restore tests done before. During that time, I was present and I could clearly see the stress, confusion, carelessness and anger around me. I did not appreciate the feeling and I was pretty sure that no one in there wanted the atmosphere like me. 2011 TRACEWRITE – Wait Type – Wait Related to Buffer and Resolution SQL Trace is a SQL Server database engine technology which monitors specific events generated when various actions occur in the database engine. When any event is fired it goes through various stages as well various routes. One of the routes is Trace I/O Provider, which sends data to its final destination either as a file or rowset. DATEDIFF – Accuracy of Various Dateparts If you want to have accuracy in seconds, you need to use a different approach. In the first example, the accurate method is to find the number of seconds first and then divide it by 60 to convert it in minutes. Dedicated Access Control for SQL Server Express Edition http://www.youtube.com/watch?v=1k00z82u4OI Book Signing at SQLPASS 2012 Who I Am And How I Got Here – True Story as Blog Post If there was a shortcut to success – I want to know. I learnt SQL Server hard way and I am still learning. There are so many things, I have to learn. There is not enough time to learn everything which we want to learn. I am constantly working on it every day. I welcome you to join my journey as well. Please join me in my journey to learn SQL Server – more the merrier. Vacation, Travel and Study – A New Concept Even those who have advanced degrees and went to college for years, or even decades, find studying hard. There is a difference between studying for a career and studying for a certification. At least to get a degree there is a variety of subjects, with labs, exams, and practice problems to make things more interesting. Order By Numeric Values Formatted as String We have a table which has a column containing alphanumeric data. The data always has first as an integer and later part as a string. The business need is to order the data based on the first part of the alphanumeric data which is an integer. Now the problem is that no matter how we use ORDER BY the result is not produced as expected. Let us understand this with an example. Resolving SQL Server Connection Errors – SQL in Sixty Seconds #030 – Video One of the most famous errors related to SQL Server is about connecting to SQL Server itself. Here is how it goes, most of the time developers have worked with SQL Server and knows pretty much every error which they face during development language. However, hardly they install fresh SQL Server. As the installation of the SQL Server is a rare occasion unless you are a DBA who is responsible for such an instance – the error faced during installations are pretty rare as well. http://www.youtube.com/watch?v=1k00z82u4OI Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article
The blocking nature of aggregates

- by Rob Farley

I wrote a post recently about how query tuning isn’t just about how quickly the query runs – that if you have something (such as SSIS) that is consuming your data (and probably introducing a bottleneck), then it might be more important to have a query which focuses on getting the first bit of data out. You can read that post here. In particular, we looked at two operators that could be used to ensure that a query returns only Distinct rows. and The Sort operator pulls in all the data, sorts it (discarding duplicates), and then pushes out the remaining rows. The Hash Match operator performs a Hashing function on each row as it comes in, and then looks to see if it’s created a Hash it’s seen before. If not, it pushes the row out. The Sort method is quicker, but has to wait until it’s gathered all the data before it can do the sort, and therefore blocks the data flow. But that was my last post. This one’s a bit different. This post is going to look at how Aggregate functions work, which ties nicely into this month’s T-SQL Tuesday. I’ve frequently explained about the fact that DISTINCT and GROUP BY are essentially the same function, although DISTINCT is the poorer cousin because you have less control over it, and you can’t apply aggregate functions. Just like the operators used for Distinct, there are different flavours of Aggregate operators – coming in blocking and non-blocking varieties. The example I like to use to explain this is a pile of playing cards. If I’m handed a pile of cards and asked to count how many cards there are in each suit, it’s going to help if the cards are already ordered. Suppose I’m playing a game of Bridge, I can easily glance at my hand and count how many there are in each suit, because I keep the pile of cards in order. Moving from left to right, I could tell you I have four Hearts in my hand, even before I’ve got to the end. By telling you that I have four Hearts as soon as I know, I demonstrate the principle of a non-blocking operation. This is known as a Stream Aggregate operation. It requires input which is sorted by whichever columns the grouping is on, and it will release a row as soon as the group changes – when I encounter a Spade, I know I don’t have any more Hearts in my hand. Alternatively, if the pile of cards are not sorted, I won’t know how many Hearts I have until I’ve looked through all the cards. In fact, to count them, I basically need to put them into little piles, and when I’ve finished making all those piles, I can count how many there are in each. Because I don’t know any of the final numbers until I’ve seen all the cards, this is blocking. This performs the aggregate function using a Hash Match. Observant readers will remember this from my Distinct example. You might remember that my earlier Hash Match operation – used for Distinct Flow – wasn’t blocking. But this one is. They’re essentially doing a similar operation, applying a Hash function to some data and seeing if the set of values have been seen before, but before, it needs more information than the mere existence of a new set of values, it needs to consider how many of them there are. A lot is dependent here on whether the data coming out of the source is sorted or not, and this is largely determined by the indexes that are being used. If you look in the Properties of an Index Scan, you’ll be able to see whether the order of the data is required by the plan. A property called Ordered will demonstrate this. In this particular example, the second plan is significantly faster, but is dependent on having ordered data. In fact, if I force a Stream Aggregate on unordered data (which I’m doing by telling it to use a different index), a Sort operation is needed, which makes my plan a lot slower. This is all very straight-forward stuff, and information that most people are fully aware of. I’m sure you’ve all read my good friend Paul White (@sql_kiwi)’s post on how the Query Optimizer chooses which type of aggregate function to apply. But let’s take a look at SQL Server Integration Services. SSIS gives us a Aggregate transformation for use in Data Flow Tasks, but it’s described as Blocking. The definitive article on Performance Tuning SSIS uses Sort and Aggregate as examples of Blocking Transformations. I’ve just shown you that Aggregate operations used by the Query Optimizer are not always blocking, but that the SSIS Aggregate component is an example of a blocking transformation. But is it always the case? After all, there are plenty of SSIS Performance Tuning talks out there that describe the value of sorted data in Data Flow Tasks, describing the IsSorted property that can be set through the Advanced Editor of your Source component. And so I set about testing the Aggregate transformation in SSIS, to prove for sure whether providing Sorted data would let the Aggregate transform behave like a Stream Aggregate. (Of course, I knew the answer already, but it helps to be able to demonstrate these things). A query that will produce a million rows in order was in order. Let me rephrase. I used a query which produced the numbers from 1 to 1000000, in a single field, ordered. The IsSorted flag was set on the source output, with the only column as SortKey 1. Performing an Aggregate function over this (counting the number of rows per distinct number) should produce an additional column with 1 in it. If this were being done in T-SQL, the ordered data would allow a Stream Aggregate to be used. In fact, if the Query Optimizer saw that the field had a Unique Index on it, it would be able to skip the Aggregate function completely, and just insert the value 1. This is a shortcut I wouldn’t be expecting from SSIS, but certainly the Stream behaviour would be nice. Unfortunately, it’s not the case. As you can see from the screenshots above, the data is pouring into the Aggregate function, and not being released until all million rows have been seen. It’s not doing a Stream Aggregate at all. This is expected behaviour. (I put that in bold, because I want you to realise this.) An SSIS transformation is a piece of code that runs. It’s a physical operation. When you write T-SQL and ask for an aggregation to be done, it’s a logical operation. The physical operation is either a Stream Aggregate or a Hash Match. In SSIS, you’re telling the system that you want a generic Aggregation, that will have to work with whatever data is passed in. I’m not saying that it wouldn’t be possible to make a sometimes-blocking aggregation component in SSIS. A Custom Component could be created which could detect whether the SortKeys columns of the input matched the Grouping columns of the Aggregation, and either call the blocking code or the non-blocking code as appropriate. One day I’ll make one of those, and publish it on my blog. I’ve done it before with a Script Component, but as Script components are single-use, I was able to handle the data knowing everything about my data flow already. As per my previous post – there are a lot of aspects in which tuning SSIS and tuning execution plans use similar concepts. In both situations, it really helps to have a feel for what’s going on behind the scenes. Considering whether an operation is blocking or not is extremely relevant to performance, and that it’s not always obvious from the surface. In a future post, I’ll show the impact of blocking v non-blocking and synchronous v asynchronous components in SSIS, using some of LobsterPot’s Script Components and Custom Components as examples. When I get that sorted, I’ll make a Stream Aggregate component available for download.

Read the article
The blocking nature of aggregates

- by Rob Farley

I wrote a post recently about how query tuning isn’t just about how quickly the query runs – that if you have something (such as SSIS) that is consuming your data (and probably introducing a bottleneck), then it might be more important to have a query which focuses on getting the first bit of data out. You can read that post here. In particular, we looked at two operators that could be used to ensure that a query returns only Distinct rows. and The Sort operator pulls in all the data, sorts it (discarding duplicates), and then pushes out the remaining rows. The Hash Match operator performs a Hashing function on each row as it comes in, and then looks to see if it’s created a Hash it’s seen before. If not, it pushes the row out. The Sort method is quicker, but has to wait until it’s gathered all the data before it can do the sort, and therefore blocks the data flow. But that was my last post. This one’s a bit different. This post is going to look at how Aggregate functions work, which ties nicely into this month’s T-SQL Tuesday. I’ve frequently explained about the fact that DISTINCT and GROUP BY are essentially the same function, although DISTINCT is the poorer cousin because you have less control over it, and you can’t apply aggregate functions. Just like the operators used for Distinct, there are different flavours of Aggregate operators – coming in blocking and non-blocking varieties. The example I like to use to explain this is a pile of playing cards. If I’m handed a pile of cards and asked to count how many cards there are in each suit, it’s going to help if the cards are already ordered. Suppose I’m playing a game of Bridge, I can easily glance at my hand and count how many there are in each suit, because I keep the pile of cards in order. Moving from left to right, I could tell you I have four Hearts in my hand, even before I’ve got to the end. By telling you that I have four Hearts as soon as I know, I demonstrate the principle of a non-blocking operation. This is known as a Stream Aggregate operation. It requires input which is sorted by whichever columns the grouping is on, and it will release a row as soon as the group changes – when I encounter a Spade, I know I don’t have any more Hearts in my hand. Alternatively, if the pile of cards are not sorted, I won’t know how many Hearts I have until I’ve looked through all the cards. In fact, to count them, I basically need to put them into little piles, and when I’ve finished making all those piles, I can count how many there are in each. Because I don’t know any of the final numbers until I’ve seen all the cards, this is blocking. This performs the aggregate function using a Hash Match. Observant readers will remember this from my Distinct example. You might remember that my earlier Hash Match operation – used for Distinct Flow – wasn’t blocking. But this one is. They’re essentially doing a similar operation, applying a Hash function to some data and seeing if the set of values have been seen before, but before, it needs more information than the mere existence of a new set of values, it needs to consider how many of them there are. A lot is dependent here on whether the data coming out of the source is sorted or not, and this is largely determined by the indexes that are being used. If you look in the Properties of an Index Scan, you’ll be able to see whether the order of the data is required by the plan. A property called Ordered will demonstrate this. In this particular example, the second plan is significantly faster, but is dependent on having ordered data. In fact, if I force a Stream Aggregate on unordered data (which I’m doing by telling it to use a different index), a Sort operation is needed, which makes my plan a lot slower. This is all very straight-forward stuff, and information that most people are fully aware of. I’m sure you’ve all read my good friend Paul White (@sql_kiwi)’s post on how the Query Optimizer chooses which type of aggregate function to apply. But let’s take a look at SQL Server Integration Services. SSIS gives us a Aggregate transformation for use in Data Flow Tasks, but it’s described as Blocking. The definitive article on Performance Tuning SSIS uses Sort and Aggregate as examples of Blocking Transformations. I’ve just shown you that Aggregate operations used by the Query Optimizer are not always blocking, but that the SSIS Aggregate component is an example of a blocking transformation. But is it always the case? After all, there are plenty of SSIS Performance Tuning talks out there that describe the value of sorted data in Data Flow Tasks, describing the IsSorted property that can be set through the Advanced Editor of your Source component. And so I set about testing the Aggregate transformation in SSIS, to prove for sure whether providing Sorted data would let the Aggregate transform behave like a Stream Aggregate. (Of course, I knew the answer already, but it helps to be able to demonstrate these things). A query that will produce a million rows in order was in order. Let me rephrase. I used a query which produced the numbers from 1 to 1000000, in a single field, ordered. The IsSorted flag was set on the source output, with the only column as SortKey 1. Performing an Aggregate function over this (counting the number of rows per distinct number) should produce an additional column with 1 in it. If this were being done in T-SQL, the ordered data would allow a Stream Aggregate to be used. In fact, if the Query Optimizer saw that the field had a Unique Index on it, it would be able to skip the Aggregate function completely, and just insert the value 1. This is a shortcut I wouldn’t be expecting from SSIS, but certainly the Stream behaviour would be nice. Unfortunately, it’s not the case. As you can see from the screenshots above, the data is pouring into the Aggregate function, and not being released until all million rows have been seen. It’s not doing a Stream Aggregate at all. This is expected behaviour. (I put that in bold, because I want you to realise this.) An SSIS transformation is a piece of code that runs. It’s a physical operation. When you write T-SQL and ask for an aggregation to be done, it’s a logical operation. The physical operation is either a Stream Aggregate or a Hash Match. In SSIS, you’re telling the system that you want a generic Aggregation, that will have to work with whatever data is passed in. I’m not saying that it wouldn’t be possible to make a sometimes-blocking aggregation component in SSIS. A Custom Component could be created which could detect whether the SortKeys columns of the input matched the Grouping columns of the Aggregation, and either call the blocking code or the non-blocking code as appropriate. One day I’ll make one of those, and publish it on my blog. I’ve done it before with a Script Component, but as Script components are single-use, I was able to handle the data knowing everything about my data flow already. As per my previous post – there are a lot of aspects in which tuning SSIS and tuning execution plans use similar concepts. In both situations, it really helps to have a feel for what’s going on behind the scenes. Considering whether an operation is blocking or not is extremely relevant to performance, and that it’s not always obvious from the surface. In a future post, I’ll show the impact of blocking v non-blocking and synchronous v asynchronous components in SSIS, using some of LobsterPot’s Script Components and Custom Components as examples. When I get that sorted, I’ll make a Stream Aggregate component available for download.

Read the article
XNA: Rotating Bones

- by MLM

XNA 4.0 I am trying to learn how to rotate bones on a very simple tank model I made in Cinema 4D. It is rigged by 3 bones, Root - Main - Turret - Barrel I have binded all of the objects to the bones so that all translations/rotations work as planned in C4D. I exported it as .fbx I based my test project after: http://create.msdn.com/en-US/education/catalog/sample/simple_animation I can build successfully with no errors but all the rotations I try to do to my bones have no effect. I can transform my Root successfully using below but the bone transforms have no effect: myModel.Root.Transform = world; Matrix turretRotation = Matrix.CreateRotationY(MathHelper.ToRadians(37)); Matrix barrelRotation = Matrix.CreateRotationX(barrelRotationValue); MainBone.Transform = MainTransform; TurretBone.Transform = turretRotation * TurretTransform; BarrelBone.Transform = barrelRotation * BarrelTransform; I am wondering if my model is just not right or something important I am missing in the code. Here is my Game1.cs using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace ModelTesting { /// <summary> /// This is the main type for your game /// </summary> public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; float aspectRatio; Tank myModel; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } /// <summary> /// Allows the game to perform any initialization it needs to before starting to run. /// This is where it can query for any required services and load any non-graphic /// related content. Calling base.Initialize will enumerate through any components /// and initialize them as well. /// </summary> protected override void Initialize() { // TODO: Add your initialization logic here myModel = new Tank(); base.Initialize(); } /// <summary> /// LoadContent will be called once per game and is the place to load /// all of your content. /// </summary> protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); // TODO: use this.Content to load your game content here myModel.Load(Content); aspectRatio = graphics.GraphicsDevice.Viewport.AspectRatio; } /// <summary> /// UnloadContent will be called once per game and is the place to unload /// all content. /// </summary> protected override void UnloadContent() { // TODO: Unload any non ContentManager content here } /// <summary> /// Allows the game to run logic such as updating the world, /// checking for collisions, gathering input, and playing audio. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); // TODO: Add your update logic here float time = (float)gameTime.TotalGameTime.TotalSeconds; // Move the pieces /* myModel.TurretRotation = (float)Math.Sin(time * 0.333f) * 1.25f; myModel.BarrelRotation = (float)Math.Sin(time * 0.25f) * 0.333f - 0.333f; */ base.Update(gameTime); } /// <summary> /// This is called when the game should draw itself. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); // Calculate the camera matrices. float time = (float)gameTime.TotalGameTime.TotalSeconds; Matrix rotation = Matrix.CreateRotationY(MathHelper.ToRadians(45)); Matrix view = Matrix.CreateLookAt(new Vector3(2000, 500, 0), new Vector3(0, 150, 0), Vector3.Up); Matrix projection = Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver4, graphics.GraphicsDevice.Viewport.AspectRatio, 10, 10000); // TODO: Add your drawing code here myModel.Draw(rotation, view, projection); base.Draw(gameTime); } } } And here is my tank class: using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace ModelTesting { public class Tank { Model myModel; // Array holding all the bone transform matrices for the entire model. // We could just allocate this locally inside the Draw method, but it // is more efficient to reuse a single array, as this avoids creating // unnecessary garbage. public Matrix[] boneTransforms; // Shortcut references to the bones that we are going to animate. // We could just look these up inside the Draw method, but it is more // efficient to do the lookups while loading and cache the results. ModelBone MainBone; ModelBone TurretBone; ModelBone BarrelBone; // Store the original transform matrix for each animating bone. Matrix MainTransform; Matrix TurretTransform; Matrix BarrelTransform; // current animation positions float turretRotationValue; float barrelRotationValue; /// <summary> /// Gets or sets the turret rotation amount. /// </summary> public float TurretRotation { get { return turretRotationValue; } set { turretRotationValue = value; } } /// <summary> /// Gets or sets the barrel rotation amount. /// </summary> public float BarrelRotation { get { return barrelRotationValue; } set { barrelRotationValue = value; } } /// <summary> /// Load the model /// </summary> public void Load(ContentManager Content) { // TODO: use this.Content to load your game content here myModel = Content.Load<Model>("Models\\simple_tank02"); MainBone = myModel.Bones["Main"]; TurretBone = myModel.Bones["Turret"]; BarrelBone = myModel.Bones["Barrel"]; MainTransform = MainBone.Transform; TurretTransform = TurretBone.Transform; BarrelTransform = BarrelBone.Transform; // Allocate the transform matrix array. boneTransforms = new Matrix[myModel.Bones.Count]; } public void Draw(Matrix world, Matrix view, Matrix projection) { myModel.Root.Transform = world; Matrix turretRotation = Matrix.CreateRotationY(MathHelper.ToRadians(37)); Matrix barrelRotation = Matrix.CreateRotationX(barrelRotationValue); MainBone.Transform = MainTransform; TurretBone.Transform = turretRotation * TurretTransform; BarrelBone.Transform = barrelRotation * BarrelTransform; myModel.CopyAbsoluteBoneTransformsTo(boneTransforms); // Draw the model, a model can have multiple meshes, so loop foreach (ModelMesh mesh in myModel.Meshes) { // This is where the mesh orientation is set foreach (BasicEffect effect in mesh.Effects) { effect.World = boneTransforms[mesh.ParentBone.Index]; effect.View = view; effect.Projection = projection; effect.EnableDefaultLighting(); } // Draw the mesh, will use the effects set above mesh.Draw(); } } } }

Read the article
SQL SERVER – Weekly Series – Memory Lane – #050

- by Pinal Dave

Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Executing Remote Stored Procedure – Calling Stored Procedure on Linked Server In this example we see two different methods of how to call Stored Procedures remotely. Connection Property of SQL Server Management Studio SSMS A very simple example of the how to build connection properties for SQL Server with the help of SSMS. Sample Example of RANKING Functions – ROW_NUMBER, RANK, DENSE_RANK, NTILE SQL Server has a total of 4 ranking functions. Ranking functions return a ranking value for each row in a partition. All the ranking functions are non-deterministic. T-SQL Script to Add Clustered Primary Key Jr. DBA asked me three times in a day, how to create Clustered Primary Key. I gave him following sample example. That was the last time he asked “How to create Clustered Primary Key to table?” 2008 2008 – TRIM() Function – User Defined Function SQL Server does not have functions which can trim leading or trailing spaces of any string at the same time. SQL does have LTRIM() and RTRIM() which can trim leading and trailing spaces respectively. SQL Server 2008 also does not have TRIM() function. User can easily use LTRIM() and RTRIM() together and simulate TRIM() functionality. http://www.youtube.com/watch?v=1-hhApy6MHM 2009 Earlier I have written two different articles on the subject Remove Bookmark Lookup. This article is as part 3 of original article. Please read the first two articles here before continuing reading this article. Query Optimization – Remove Bookmark Lookup – Remove RID Lookup – Remove Key Lookup Query Optimization – Remove Bookmark Lookup – Remove RID Lookup – Remove Key Lookup – Part 2 Query Optimization – Remove Bookmark Lookup – Remove RID Lookup – Remove Key Lookup – Part 3 Interesting Observation – Query Hint – FORCE ORDER SQL Server never stops to amaze me. As regular readers of this blog already know that besides conducting corporate training, I work on large-scale projects on query optimizations and server tuning projects. In one of the recent projects, I have noticed that a Junior Database Developer used the query hint Force Order; when I asked for details, I found out that the basic concept was not properly understood by him. Queries Waiting for Memory Allocation to Execute In one of the recent projects, I was asked to create a report of queries that are waiting for memory allocation. The reason was that we were doubtful regarding whether the memory was sufficient for the application. The following query can be useful in similar cases. Queries that do not have to wait on a memory grant will not appear in the result set of following query. 2010 Quickest Way to Identify Blocking Query and Resolution – Dirty Solution As the title suggests, this is quite a dirty solution; it’s not as elegant as you expect. However, it works totally fine. Simple Explanation of Data Type Precedence While I was working on creating a question for SQL SERVER – SQL Quiz – The View, The Table and The Clustered Index Confusion, I had actually created yet another question along with this question. However, I felt that the one which is posted on the SQL Quiz is much better than this one because what makes that more challenging question is that it has a multiple answer. Encrypted Stored Procedure and Activity Monitor I recently had received questionable if any stored procedure is encrypted can we see its definition in Activity Monitor.Answer is - No. Let us do a quick test. Let us create following Stored Procedure and then launch the Activity Monitor and check the text. Indexed View always Use Index on Table A single table can have maximum 249 non clustered indexes and 1 clustered index. In SQL Server 2008, a single table can have maximum 999 non clustered indexes and 1 clustered index. It is widely believed that a table can have only 1 clustered index, and this belief is true. I have some questions for all of you. Let us assume that I am creating view from the table itself and then create a clustered index on it. In my view, I am selecting the complete table itself. 2011 Detecting Database Case Sensitive Property using fn_helpcollations() I received a question on how to determine the case sensitivity of the database. The quick answer to this is to identify the collation of the database and check the properties of the collation. I have previously written how one can identify database collation. Once you have figured out the collation of the database, you can put that in the WHERE condition of the following T-SQL and then check the case sensitivity from the description. Server Side Paging in SQL Server CE (Compact Edition) SQL Server Denali is coming up with new T-SQL of Paging. I have written about the same earlier.SQL SERVER – Server Side Paging in SQL Server Denali – A Better Alternative, SQL SERVER – Server Side Paging in SQL Server Denali Performance Comparison, SQL SERVER – Server Side Paging in SQL Server Denali – Part2 What is very interesting is that SQL Server CE 4.0 have the same feature introduced. Here is the quick example of the same. To run the script in the example, you will have to do installWebmatrix 4.0 and download sample database. Once done you can run following script. Why I am Going to Attend PASS Summit Unite 2011 The four-day event will be marked by a lot of learning, sharing, and networking, which will help me increase both my knowledge and contacts. Every year, PASS Summit provides me a golden opportunity to build my network as well as to identify and meet potential customers or employees. 2012 Manage Help Settings – CTRL + ALT + F1 This is very interesting read as my daughter once accidently came across a screen in SQL Server Management Studio. It took me 2-3 minutes to figure out how she has created the same screen. Recover the Accidentally Renamed Table “I accidentally renamed table in my SSMS. I was scrolling very fast and I made mistakes. It was either because I double clicked or clicked on F2 (shortcut key for renaming). However, I have made the mistake and now I have no idea how to fix this. If you have renamed the table, I think you pretty much is out of luck. Here are few things which you can do which can give you an idea about what your table name can be if you are lucky. Identify Numbers of Non Clustered Index on Tables for Entire Database Here is the script which will give you numbers of non clustered indexes on any table in entire database. Identify Most Resource Intensive Queries – SQL in Sixty Seconds #029 – Video Here is the complete complete script which I have used in the SQL in Sixty Seconds Video. Thanks Harsh for important Tip in the comment. http://www.youtube.com/watch?v=3kDHC_Tjrns Advanced Data Quality Services with Melissa Data – Azure Data Market For the purposes of the review, I used a database I had in an Excel spreadsheet with name and address information. Upon a cursory inspection, there are miscellaneous problems with these records; some addresses are missing ZIP codes, others missing a city, and some records are slightly misspelled or have unparsed suites. With DQS, I can easily add a knowledge base to help standardize my values, such as for state abbreviations. But how do I know that my address is correct? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article
Profiling Startup Of VS2012 – SpeedTrace Profiler

- by Alois Kraus

SpeedTrace is a relatively unknown profiler made a company called Ipcas. A single professional license does cost 449€+VAT. For the test I did use SpeedTrace 4.5 which is currently Beta. Although it is cheaper than dotTrace it has by far the most options to influence how profiling does work. First you need to create a tracing project which does configure tracing for one process type. You can start the application directly from the profiler or (much more interesting) it does attach to a specific process when it is started. For this you need to check “Trace the specified …” radio button and enter the process name in the “Process Name of the Trace” edit box. You can even selectively enable tracing for processes with a specific command line. Then you need to activate the trace project by pressing the Activate Project button and you are ready to start VS as usual. If you want to profile the next 10 VS instances that you start you can set the Number of Processes counter to e.g. 10. This is immensely helpful if you are trying to profile only the next 5 started processes. As you can see there are many more tabs which do allow to influence tracing in a much more sophisticated way. SpeedTrace is the only profiler which does not rely entirely on the profiling Api of .NET. Instead it does modify the IL code (instrumentation on the fly) to write tracing information to disc which can later be analyzed. This approach is not only very fast but it does give you unprecedented analysis capabilities. Once the traces are collected they do show up in your workspace where you can open the trace viewer. I do skip the other windows because this view is by far the most useful one. You can sort the methods not only by Wall Clock time but also by CPU consumption and wait time which none of the other products support in their views at the same time. If you want to optimize for CPU consumption sort by CPU time. If you want to find out where most time is spent you need Clock Total time and Clock Waiting. There you can directly see if the method did take long because it did wait on something or it did really execute stuff that did take so long. Once you have found a method you want to drill deeper you can double click on a method to get to the Caller/Callee view which is similar to the JetBrains Method Grid view. But this time you do see much more. In the middle is the clicked method. Above are the methods that call you and below are the methods that you do directly call. Normally you would then start digging deeper to find the end of the chain where the slow method worth optimizing is located. But there is a shortcut. You can press the magic button to calculate the aggregation of all called methods. This is displayed in the lower left window where you can see each method call and how long it did take. There you can also sort to see if this call stack does only contain methods (e.g. WCF connect calls which you cannot make faster) not worth optimizing. YourKit has a similar feature where it is called Callees List. In the Functions tab you have in the context menu also many other useful analysis options One really outstanding feature is the View Call History Drilldown. When you select this one you get not a sum of all method invocations but a list with the duration of each method call. This is not surprising since SpeedTrace does use tracing to get its timings. There you can get many useful graphs how this method did behave over time. Did it become slower at some point in time or was only the first call slow? The diagrams and the list will tell you that. That is all fine but what should I do when one method call was slow? I want to see from where it was coming from. No problem select the method in the list hit F10 and you get the call stack. This is a life saver if you e.g. search for serialization problems. Today Serializers are used everywhere. You want to find out from where the 5s XmlSerializer.Deserialize call did come from? Hit F10 and you get the call stack which did invoke the 5s Deserialize call. The CPU timeline tab is also useful to find out where long pauses or excessive CPU consumption did happen. Click in the graph to get the Thread Stacks window where you can get a quick overview what all threads were doing at this time. This does look like the Stack Traces feature in YourKit. Only this time you get the last called method first which helps to quickly see what all threads were executing at this moment. YourKit does generate a rather long list which can be hard to go through when you have many threads. The thread list in the middle does not give you call stacks or anything like that but you see which methods were found most often executing code by the profiler which is a good indication for methods consuming most CPU time. This does sound too good to be true? I have not told you the best part yet. The best thing about this profiler is the staff behind it. When I do see a crash or some other odd behavior I send a mail to Ipcas and I do get usually the next day a mail that the problem has been fixed and a download link to the new version. The guys at Ipcas are even so helpful to log in to your machine via a Citrix Client to help you to get started profiling your actual application you want to profile. After a 2h telco I was converted from a hater to a believer of this tool. The fast response time might also have something to do with the fact that they are actively working on 4.5 to get out of the door. But still the support is by far the best I have encountered so far. The only downside is that you should instrument your assemblies including the .NET Framework to get most accurate numbers. You can profile without doing it but then you will see very high JIT times in your process which can severely affect the correctness of the measured timings. If you do not care about exact numbers you can also enable in the main UI in the Data Trace tab logging of method arguments of primitive types. If you need to know what files at which times were opened by your application you can find it out without a debugger. Since SpeedTrace does read huge trace files in its reader you should perhaps use a 64 bit machine to be able to analyze bigger traces as well. The memory consumption of the trace reader is too high for my taste. But they did promise for the next version to come up with something much improved.

Read the article
Top 10 Browser Productivity Tips

- by Renso

Originally posted on: http://geekswithblogs.net/renso/archive/2013/10/14/top-10-browser-productivity-tips.aspxYou don’t have to be a geek to be a productive browser user. The tips below have been selected by actions users take most of the time to navigate a web-site but use long-standing keyboard or mouse actions to get them done, when there are keyboard short-cuts you can use instead. Since you hands are already on the keyboard it is almost always faster to sue a keyboard shortcut to get something done that you usually used the mouse for. For example right-clicking on something to copy it and then doing to same for pasting something is very time consuming, keyboard shortcuts have been created that simplify the task. All it takes are a few memory brain cells to remember them. Here are the tips, in no particular order: Tip 1 Hold down the spacebar on your keyboard to page to the end of your web page rather than using your mouse. This is really a slow way of doing it. If you want to page one page at a time, hit the spacebar once, and again to page again. But if you want to page all the way to the end of the web page simply hit Ctrl+End (that is hold down the Ctrl key and hit the End button on your keyboard). To get to the top of your web page, simply hit Ctrl + Home to go all the way to the top of your web page. Tip 2 Where are my downloads? Some folks run downloads again-and-again because they do not know where the last one went and they do not see the popup, or browser note on their web page in the footer, etc. Simply hit Ctrl+J. Works in most browsers. Tip 3 Selecting a US state from a drop down box. Don’t use the mouse, takes just way too long to scroll. When you tab to the drop down box or click on it with your mouse, simply hit the first character of the state and it will be selected. For Texas for example hit the letter “T” twice on your keyboard to get to it. The same concept can be applied to any drop down box that is alphabetical or numerically sorted. Tip 4 Fixing spelling errors. All modern-day browsers support this now. You see the red wavy lines underscoring a word, yes it is a spelling error. How do you fix it? Don’t overtype it or try and fix it manually, fist right-click on it and a list of suggestions comes up. If it does not show up, like my name “Renso” and you know how to spell your name as in this example, look further down the list of options (the little window popup that appears when you right click) and you should see an option to “Add to Dictionary”. Be warned, when you add it, it only adds it to the browser you’re using’s dictionary. If you use Google Chrome, Firefox and IE, each one will have their own list. Tip 5 So you have trouble seeing the text on the screen. Or you are looking at a photo, for example in Facebook. You want to zoom in to read better or zoom into a photo a bit more. Hit Ctrl++ (hold down Ctrl key and hit the plus key – actually it’s the equal key but it is easier to remember that it is plus for bigger). Hit the minus to zoom out. Now you can’t remember what the original size was since you were so excited to hit it 20 times, or was that 21… Simply hit Ctrl+0 (that is zero) and it will reset it to the default. Tip 6 So you closed a couple of tabs in your browser. Suddenly you remember something you wanted to double-check something on one of the tabs, you cannot remember the URL ad the tab is gone forever, or is it? Simply hit Ctrl+Shift+t and it will bring back your tabs one by one each time you click the T. This has also been a great way for me to quickly close some tabs because I don’t want my boss to see I’m shopping and then hitting Ctrl+Shift+t to quickly get it back and complete my check-put and purchase. Or, for parents, when you walk into your daughter’s room and you see she quickly clicks and closes a window/tab in here browser. Not to worry my little darling, daddy will Ctrl+Shift+t and see what boys on Facebook you were talking too… Tip 7 The web browser is frozen on your PC/Laptop/Whatever, in this example it may be your Internet Explorer browser. I don’t mention Firefox or Chrome here because it probably never happens in their world. You cannot close it, it won’t respond to anything you have done s far except for the next step you are about to take, which is throw your two-day old coffee on your keyboard. This happens especially on sites that want to force you to complete a purchase order. Hit Ctrl+Alt+Del on your keyboard on any version of windows, select TASK MANAGER. In the First Tab, which is the Process Tab, look for the item in question. In this example you should see Internet Explorer. Right-click it and select “End Task”. It will force the thread out of memory and terminate that process. You can of course do this with any program running under your account. Tip 8 This is a personal favorite of mine. To select words in the paragraph without using the mouse. You don’t want to select one character at a time like when you use the Ctrl+arrows as it can be very slow if you want to select a lot of text. You also want to select whole words. Simply use the Ctrl+Shift_arrow (right or left depending which direction you want to go. Tip 9 I was a bit reluctant to add this one, but being in the professional services industry still come across many-a-folk that simply can’t copy-and-paste them-all text or images that reside on them screens, y’all. Ctrl+c to copy and Ctrl+v to paste it. Works a lot faster than using the mouse. You may be asking: “Well why in the devil did they not use Ctrl+p for paste…. because that is for printing. This is of course not limited to the browser world, it applies to almost any piece of software running on PC or Mac. Go try it on an image on your browser, right-click it and select copy. Open a word document and Ctrl+v to paste the image in there. Please consider copyright laws. Tip 10 Getting rid of annoying ads. Now this only works when you load a web page, meaning when you get back to the same page later you will have to do this again and you will need to learn a tool to do it, WELL WORTH IT. For example, I use GrooveShark to listen to music but I don’t like the ads they show. Install a tool like Firebug for Firefox or use the Ctrl+Shift+I on Chrome to bring up the developer toolbar. Shows at the bottom of the page. With Firefox, once you have installed Firebug as an add-on, a yellow bug should appear on the top right-hand-side of your browser, click on it to display the developer toolbar. You will need to learn how to use it, but once you know how to select an item/section on the window (usually just right-click the add you don’t want to see and select “Inspect Element”, the developer toolbar will appear (if not already there)) and then simply hit delete and it will remove the add from the screen. If you don’t know HTML you may need to play with it a bit, but once you understand how it works can open up a whole new world for you on how web pages actually work. If you can think of any others that have saved you a ton of time please let me know so I can add them to a top 99 list.

Read the article
Notes on implementing Visual Studio 2010 Navigate To

- by cyberycon

One of the many neat functions added to Visual Studio in VS 2010 was the Navigate To feature. You can find it by clicking Edit, Navigate To, or by using the keyboard shortcut Ctrl, (yes, that's control plus the comma key). This pops up the Navigate To dialog that looks like this: As you type, Navigate To starts searching through a number of different search providers for your term. The entries in the list change as you type, with most providers doing some kind of fuzzy or at least substring matching. If you have C#, C++ or Visual Basic projects in your solution, all symbols defined in those projects are searched. There's also a file search provider, which displays all matching filenames from projects in the current solution as well. And, if you have a Visual Studio package of your own, you can implement a provider too. Micro Focus (where I work) provide the Visual COBOL language inside Visual Studio (http://visualstudiogallery.msdn.microsoft.com/ef9bc810-c133-4581-9429-b01420a9ea40 ), and we wanted to provide this functionality too. This post provides some notes on the things I discovered mainly through trial and error, but also with some kind help from devs inside Microsoft. The expectation of Navigate To is that it searches across the whole solution, not just the current project. So in our case, we wanted to search for all COBOL symbols inside all of our Visual COBOL projects inside the solution. So first of all, here's the Microsoft documentation on Navigate To: http://msdn.microsoft.com/en-us/library/ee844862.aspx . It's the reference information on the Microsoft.VisualStudio.Language.NavigateTo.Interfaces Namespace, and it lists all the interfaces you will need to implement to create your own Navigate To provider. Navigate To uses Visual Studio's latest mechanism for integrating external functionality and services, Managed Extensibility Framework (MEF). MEF components don't require any registration with COM or any other registry entries to be found by Visual Studio. Visual Studio looks in several well-known locations for manifest files (extension.vsixmanifest). It then uses reflection to scan for MEF attributes on classes in the assembly to determine which functionality the assembly provides. MEF itself is actually part of the .NET framework, and you can learn more about it here: http://mef.codeplex.com/. To get started with Visual Studio and MEF you could do worse than look at some of the editor examples on the VSX page http://archive.msdn.microsoft.com/vsx . I've also written a small application to help with switching between development and production MEF assemblies, which you can find on Codeproject: http://www.codeproject.com/KB/miscctrl/MEF_Switch.aspx. The Navigate To interfaces Back to Navigate To, and summarizing the MSDN reference documentation, you need to implement the following interfaces: INavigateToItemProviderFactoryThis is Visual Studio's entry point to your Navigate To implementation, and you must decorate your implementation with the following MEF export attribute: [Export(typeof(INavigateToItemProviderFactory))] INavigateToItemProvider Your INavigateToItemProviderFactory needs to return your implementation of INavigateToItemProvider. This class implements StartSearch() and StopSearch(). StartSearch() is the guts of your provider, and we'll come back to it in a minute. This object also needs to implement IDisposeable(). INavigateToItemDisplayFactory Your INavigateToItemProvider hands back NavigateToItems to the NavigateTo framework. But to give you good control over what appears in the NavigateTo dialog box, these items will be handed back to your INavigateToItemDisplayFactory, which must create objects implementing INavigateToItemDisplay INavigateToItemDisplay Each of these objects represents one result in the Navigate To dialog box. As well as providing the description and name of the item, this object also has a NavigateTo() method that should be capable of displaying the item in an editor when invoked. Carrying out the search The lifecycle of your INavigateToItemProvider is the same as that of the Navigate To dialog. This dialog is modal, which makes your implementation a little easier because you know that the user can't be changing things in editors and the IDE while this dialog is up. But the Navigate To dialog DOES NOT run on the main UI thread of the IDE – so you need to be aware of that if you want to interact with editors or other parts of the IDE UI. When the user invokes the Navigate To dialog, your INavigateToItemProvider gets sent a TryCreateNavigateToItemProvider() message. Instantiate your INavigateToItemProvider and hand this back. The sequence diagram below shows what happens next. Your INavigateToItemProvider will get called with StartSearch(), and passed an INavigateToCallback. StartSearch() is an asynchronous request – you must return from this method as soon as possible, and conduct your search on a separate thread. For each match to the search term, instantiate a NavigateToItem object and send it to INavigateToCallback.AddItem(). But as the user types in the Search Terms field, NavigateTo will invoke your StartSearch() method repeatedly with the changing search term. When you receive the next StartSearch() message, you have to abandon your current search, and start a new one. You can't rely on receiving a StopSearch() message every time. Finally, when the Navigate To dialog box is closed by the user, you will get a Dispose() message – that's your cue to abandon any uncompleted searches, and dispose any resources you might be using as part of your search. While you conduct your search invoke INavigateToCallback.ReportProgress() occasionally to provide feedback about how close you are to completing the search. There does not appear to be any particular requirement to how often you invoke ReportProgress(), and you report your progress as the ratio of two integers. In my implementation I report progress in terms of the number of symbols I've searched over the total number of symbols in my dictionary, and send a progress report every 16 symbols. Displaying the Results The Navigate to framework invokes INavigateToItemDisplayProvider.CreateItemDisplay() once for each result you passed to the INavigateToCallback. CreateItemDisplay() is passed the NavigateToItem you handed to the callback, and must return an INavigateToItemDisplay object. NavigateToItem is a sealed class which has a few properties, including the name of the symbol. It also has a Tag property, of type object. This enables you to stash away all the information you will need to create your INavigateToItemDisplay, which must implement an INavigateTo() method to display a symbol in an editor IDE when the user double-clicks an entry in the Navigate To dialog box. Since the tag is of type object, it is up to you, the implementor, to decide what kind of object you store in here, and how it enables the retrieval of other information which is not included in the NavigateToItem properties. Some of the INavigateToItemDisplay properties are self-explanatory, but a couple of them are less obvious: Additional informationThe string you return here is displayed inside brackets on the same line as the Name property. In English locales, Visual Studio includes the preposition "of". If you look at the first line in the Navigate To screenshot at the top of this article, Book_WebRole.Default is the additional information for textBookAuthor, and is the namespace qualified type name the symbol appears in. For procedural COBOL code we display the Program Id as the additional information DescriptionItemsYou can use this property to return any textual description you want about the item currently selected. You return a collection of DescriptionItem objects, each of which has a category and description collection of DescriptionRun objects. A DescriptionRun enables you to specify some text, and optional formatting, so you have some control over the appearance of the displayed text. The DescriptionItems property is displayed at the bottom of the Navigate To dialog box, with the Categories on the left and the Descriptions on the right. The Visual COBOL implementation uses it to display more information about the location of an item, making it easier for the user to know disambiguate duplicate names (something there can be a lot of in large COBOL applications). Summary I hope this article is useful for anyone implementing Navigate To. It is a fantastic navigation feature that Microsoft have added to Visual Studio, but at the moment there still don't seem to be any examples on how to implement it, and the reference information on MSDN is a little brief for anyone attempting an implementation.

Read the article
Windows Media Player won't launch on Vista - how to repair or reinstall it?

- by rpm1200

My friend asked me to look at her Acer Aspire laptop with Vista Home Premium as it is no longer playing DVDs. I found that Windows Media Player would not launch. I found this thread, which contained a number of suggestions, none of which solved the problem. Here is what I tried: Tried running WMP via desktop shortcut, QuickLaunch bar or going to Program Files\Windows Media Player\wmplayer.exe. In all cases, wmplayer would launch then terminate immediately (verified through the Processes tab in Task Manager). Tried running wmplayer.exe as Administrator. The UAC dialog would come up, I'd approve, then wmplayer would launch and terminate immediately. Uninstalled all non-Microsoft media programs except RealPlayer, iTunes, QuickTime, Acer Arcade (the laptop owner uses all those apps). Tried running Program Files\Windows Media Player\setup_wm.exe as Administrator, it launched but said that a newer version of WMP was already installed. Deleted the "Windows Media" folder located under %userprofile%\appdata\local\Microsoft then tried starting WMP - wmplayer would launch and terminate immediately. Register wmp.dll by typing "regsvr32 wmp.dll" in an Administrator cmd window then tried starting WMP - wmplayer would launch and terminate immediately. Run "SFC /SCANFILE" in an Administrator cmd window - get an error message that it found invalid system files and could not fix them, so look at the log file cbs.log. The log file shows that there are broken files associated with Windows Sidebar (which the user does not use) but none relating to WMP. Log off to safe mode and run "SFC /SCANFILE" in an Administrator cmd window again - same results. Try to download and install XP WMP - the microsoft.com site recognizes the OS as Genuine and allows the download, but when I launch the installer it says the system is not Genuine. Clicking the link directs me back to IE where I can authenticate the system as Genuine. The installer still fails to recognize the system as Genuine. It is a Genuine Vista installation. Try to run this update (KB931621). The installer said it did not apply to the system. Set Windows Media Player as default in Program Access and Defaults. Same results. Tried running "for %a in (%systemroot%\system32\wm*.dll) do regsvr32 /s %a" in an Administrator cmd window - same results. Went to this Knowledge Base article (947541) and ran the Microsoft Fix It. The Fix It ran successfully, but WMP would still launch and terminate immediately. Multiple reboots in the process of doing all of these steps. After all this, looked in the Application and Security logs. No events pertaining to WMP were logged. The computer was preinstalled with Vista Home Premium and I have the Acer backup DVDs which will reimage the drive. I do not have Vista install DVDs. Reimaging the system is not an option. I'd also rather not restore the system to an earlier point unless it's absolutely necessary. What else can I do to repair or reinstall WMP?

Read the article
Entity Framework 6: Alpha2 Now Available

- by ScottGu

The Entity Framework team recently announced the 2nd alpha release of EF6. The alpha 2 package is available for download from NuGet. Since this is a pre-release package make sure to select “Include Prereleases” in the NuGet package manager, or execute the following from the package manager console to install it: PM> Install-Package EntityFramework -Pre This week’s alpha release includes a bunch of great improvements in the following areas: Async language support is now available for queries and updates when running on .NET 4.5. Custom conventions now provide the ability to override the default conventions that Code First uses for mapping types, properties, etc. to your database. Multi-tenant migrations allow the same database to be used by multiple contexts with full Code First Migrations support for independently evolving the model backing each context. Using Enumerable.Contains in a LINQ query is now handled much more efficiently by EF and the SQL Server provider resulting greatly improved performance. All features of EF6 (except async) are available on both .NET 4 and .NET 4.5. This includes support for enums and spatial types and the performance improvements that were previously only available when using .NET 4.5. Start-up time for many large models has been dramatically improved thanks to improved view generation performance. Below are some additional details about a few of the improvements above: Async Support .NET 4.5 introduced the Task-Based Asynchronous Pattern that uses the async and await keywords to help make writing asynchronous code easier. EF 6 now supports this pattern. This is great for ASP.NET applications as database calls made through EF can now be processed asynchronously – avoiding any blocking of worker threads. This can increase scalability on the server by allowing more requests to be processed while waiting for the database to respond. The following code shows an MVC controller that is querying a database for a list of location entities: public class HomeController : Controller { LocationContext db = new LocationContext(); public async Task<ActionResult> Index() { var locations = await db.Locations.ToListAsync(); return View(locations); } } Notice above the call to the new ToListAsync method with the await keyword. When the web server reaches this code it initiates the database request, but rather than blocking while waiting for the results to come back, the thread that is processing the request returns to the thread pool, allowing ASP.NET to process another incoming request with the same thread. In other words, a thread is only consumed when there is actual processing work to do, allowing the web server to handle more concurrent requests with the same resources. A more detailed walkthrough covering async in EF is available with additional information and examples. Also a walkthrough is available showing how to use async in an ASP.NET MVC application. Custom Conventions When working with EF Code First, the default behavior is to map .NET classes to tables using a set of conventions baked into EF. For example, Code First will detect properties that end with “ID” and configure them automatically as primary keys. However, sometimes you cannot or do not want to follow those conventions and would rather provide your own. For example, maybe your primary key properties all end in “Key” instead of “Id”. Custom conventions allow the default conventions to be overridden or new conventions to be added so that Code First can map by convention using whatever rules make sense for your project. The following code demonstrates using custom conventions to set the precision of all decimals to 5. As with other Code First configuration, this code is placed in the OnModelCreating method which is overridden on your derived DbContext class: protected override void OnModelCreating(DbModelBuilder modelBuilder) { modelBuilder.Properties<decimal>() .Configure(x => x.HasPrecision(5)); } But what if there are a couple of places where a decimal property should have a different precision? Just as with all the existing Code First conventions, this new convention can be overridden for a particular property simply by explicitly configuring that property using either the fluent API or a data annotation. A more detailed description of custom code first conventions is available here. Community Involvement I blogged a while ago about EF being released under an open source license. Since then a number of community members have made contributions and these are included in EF6 alpha 2. Two examples of community contributions are: AlirezaHaghshenas contributed a change that increases the startup performance of EF for larger models by improving the performance of view generation. The change means that it is less often necessary to use of pre-generated views. UnaiZorrilla contributed the first community feature to EF: the ability to load all Code First configuration classes in an assembly with a single method call like the following: protected override void OnModelCreating(DbModelBuilder modelBuilder) { modelBuilder.Configurations .AddFromAssembly(typeof(LocationContext).Assembly); } This code will find and load all the classes that inherit from EntityTypeConfiguration<T> or ComplexTypeConfiguration<T> in the assembly where LocationContext is defined. This reduces the amount of coupling between the context and Code First configuration classes, and is also a very convenient shortcut for large models. Other upcoming features coming in EF 6 Lots of information about the development of EF6 can be found on the EF CodePlex site, including a roadmap showing the other features that are planned for EF6. One of of the nice upcoming features is connection resiliency, which will automate the process of retying database operations on transient failures common in cloud environments and with databases such as the Windows Azure SQL Database. Another often requested feature that will be included in EF6 is the ability to map stored procedures to query and update operations on entities when using Code First. Summary EF6 is the first open source release of Entity Framework being developed in CodePlex. The alpha 2 preview release of EF6 is now available on NuGet, and contains some really great features for you to try. The EF team are always looking for feedback from developers - especially on the new features such as custom Code First conventions and async support. To provide feedback you can post a comment on the EF6 alpha 2 announcement post, start a discussion or file a bug on the CodePlex site. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article
Hosed Windows 7 permissons

- by Anthony

Here is the most interesting thing I've noticed since the problems started: If I go into a control panel/system module (in this case the Resource Monitor) that has a "Check Online" type option, Firefox (my default browser) opens right up without a problem. But if I just start Firefox from any shortcuts (start menu, desktop, etc), the Firefox process starts up (and the start menu icon starts glowing) only to end without notice a few seconds later. Possibly related: If I start up in Safe-Mode (w/o Networking, but haven't tried with yet), I can start up FF or Chrome just fine, but if I attempt to open Chrome normally, I get a permissions error. Opera and Safari seem to be okay (mostly). Safari crashes when I try to download any files. All of the above leads me to believe that some (but clearly not all) core files have messed up permissions. Or rather, that I no longer have permission. System still does, based on Firefox opening without fail when the system initiates it. I've run MS Forefront once in normal mode, Malwarebytes twice in normal mode and once in safe-mode. One trojan found and deleted, but the problem persists. Two other things worth mentioning: I accidentally duplicated my library... I thought I'd try to add the "Internet" folder to my start menu, next to music and downloads. The first advanced thing I tried was "create new library". I clearly misunderstood what this means. I thought it was a way to add virtual folders to the library (which I thought, in turn, would allow me to choose it as a link on the start menu), but instead it recreated my already existing user folder, AppData and all. I didn't notice this until today. Then I tried setting permissions for my User folder to full control, recursively... Confused but not giving up,I thought I could maybe create a shortcut to the NetHood folder manually, but instead got hit with an access denied error. So I tried to change the permission levels for all sub-folders to my user folder so that I had full control. I got several access denied errors along the way. At this point I gave up, went out, ended up caught in the rain and stuck on a friend's couch and showing up late for work the next day. Thanks for nothing, Microsoft. When I finally got home today (20 hours later), I noticed that Firefox was acting really strange. I tried opening Chrome to see if the problem was client side or server side, and instead got the above-mentioned "you don't have permission to open this program" alert. And I think that's the whole story. Oh, I also did a system restore, but not chose a point from this morning (an auto update), and it worked but the problem wasn't fixed. And then all the earlier restore points were gone. So the questions are: a) is there a way to set the admin and user privs back to "default"? b) would this, in anyone's expert opinion, fix the problems I'm having? c) how come being logged in as an admin isn't the same as being logged in with admin privs? It seems that half the time I have to do run as admin for fairy standard things because i'm being treated as me-theuser and not me-theadmin. Thanks for reading.

Read the article
Windows Media Player won't launch on Vista - how to repair or reinstall it?

- by rpm1200

My friend asked me to look at her Acer Aspire laptop with Vista Home Premium as it is no longer playing DVDs. I found that Windows Media Player would not launch. I found this thread, which contained a number of suggestions, none of which solved the problem. Here is what I tried: Tried running WMP via desktop shortcut, QuickLaunch bar or going to Program Files\Windows Media Player\wmplayer.exe. In all cases, wmplayer would launch then terminate immediately (verified through the Processes tab in Task Manager). Tried running wmplayer.exe as Administrator. The UAC dialog would come up, I'd approve, then wmplayer would launch and terminate immediately. Uninstalled all non-Microsoft media programs except RealPlayer, iTunes, QuickTime, Acer Arcade (the laptop owner uses all those apps). Tried running Program Files\Windows Media Player\setup_wm.exe as Administrator, it launched but said that a newer version of WMP was already installed. Deleted the "Windows Media" folder located under %userprofile%\appdata\local\Microsoft then tried starting WMP - wmplayer would launch and terminate immediately. Register wmp.dll by typing "regsvr32 wmp.dll" in an Administrator cmd window then tried starting WMP - wmplayer would launch and terminate immediately. Run "SFC /SCANFILE" in an Administrator cmd window - get an error message that it found invalid system files and could not fix them, so look at the log file cbs.log. The log file shows that there are broken files associated with Windows Sidebar (which the user does not use) but none relating to WMP. Log off to safe mode and run "SFC /SCANFILE" in an Administrator cmd window again - same results. Try to download and install XP WMP - the microsoft.com site recognizes the OS as Genuine and allows the download, but when I launch the installer it says the system is not Genuine. Clicking the link directs me back to IE where I can authenticate the system as Genuine. The installer still fails to recognize the system as Genuine. It is a Genuine Vista installation. Try to run this update (KB931621). The installer said it did not apply to the system. Set Windows Media Player as default in Program Access and Defaults. Same results. Tried running "for %a in (%systemroot%\system32\wm*.dll) do regsvr32 /s %a" in an Administrator cmd window - same results. Went to this Knowledge Base article (947541) and ran the Microsoft Fix It. The Fix It ran successfully, but WMP would still launch and terminate immediately. Multiple reboots in the process of doing all of these steps. After all this, looked in the Application and Security logs. No events pertaining to WMP were logged. The computer was preinstalled with Vista Home Premium and I have the Acer backup DVDs which will reimage the drive. I do not have Vista install DVDs. Reimaging the system is not an option. I'd also rather not restore the system to an earlier point unless it's absolutely necessary. What else can I do to repair or reinstall WMP?

Read the article
Getting sendmail to install/work for using php mail()

- by harryg

I'm running WordPress on a Ubuntu VPS. When WordPress tries to send an email like a password reset or registration email it never gets delivered. WordPress uses php's mail() function. I figure it's not working as my VPS didn't have sendmail installed. So I went into SSH and installed it with sudo apt-get install sendmail which appeared to succeed. Following more googled advice I edited the php.ini file to have the sendmail path. I located it as being /usr/sbin/sendmail which I believe is typical for many *nix servers. To check I browsed to this directory on FTP. The "sendmail" directory appears to be a shortcut. Is this correct/expected? Either way the php mail function is not working. I have created a phpinfo file and a test mail php file which contains just a mail() function with my email as the recipient. Note: my VPS doesn't yet have a domain, just an IP address. Would this affect sendmail functionality? My phpinfo is here for your reference: http://95.142.166.209/phpinfo.php Do I also need postfix? I don't think I have it... Here is some of the mail log. I executed the mail function towards the end: Nov 27 18:41:02 sergeserver sm-msp-queue[5450]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 19:00:01 sergeserver sm-msp-queue[5497]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 19:01:01 sergeserver sm-msp-queue[5497]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 19:20:01 sergeserver sm-msp-queue[5532]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 19:21:01 sergeserver sm-msp-queue[5532]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 19:40:01 sergeserver sm-msp-queue[5568]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 19:41:01 sergeserver sm-msp-queue[5568]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 20:00:01 sergeserver sm-msp-queue[5605]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 20:01:01 sergeserver sm-msp-queue[5605]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 20:20:01 sergeserver sm-msp-queue[5641]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 20:21:01 sergeserver sm-msp-queue[5641]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 20:40:01 sergeserver sm-msp-queue[5675]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 20:41:01 sergeserver sm-msp-queue[5675]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 21:00:01 sergeserver sm-msp-queue[5712]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 21:01:01 sergeserver sm-msp-queue[5712]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 21:20:02 sergeserver sm-msp-queue[5747]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 21:21:02 sergeserver sm-msp-queue[5747]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 21:40:01 sergeserver sm-msp-queue[5782]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 21:41:01 sergeserver sm-msp-queue[5782]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 22:00:01 sergeserver sm-msp-queue[5831]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 22:01:01 sergeserver sm-msp-queue[5831]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 22:20:01 sergeserver sm-msp-queue[5866]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 22:21:01 sergeserver sm-msp-queue[5866]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 22:37:19 sergeserver sendmail[5903]: My unqualified host name (sergeserver) unknown; sleeping for retry Nov 27 22:38:19 sergeserver sendmail[5903]: unable to qualify my own domain name (sergeserver) -- using short name Nov 27 22:38:19 sergeserver sendmail[5903]: qARLcJYI005903: from=adminftp, size=158, class=0, nrcpts=0, msgid=<201211272138.qARLcJYI005903@sergeserver>, relay=adminftp@localhost

Read the article
Bad disks in ancient server

- by Joel Coel

I have a 1998-era Netware 3.12 server that runs everything on our campus: general ledger, purchasing, payroll, student information, grades, you name it. The server has an Adaptec RAID controller with two volumes: RAID 1, 2 17GB scsi disks, Seagate ST318417W RAID 5, 3 4GB scsi disks, 2 Seagate ST34573W and 1 ST34572W. We are currently in the early stages of a project to replace this system, but you don't just jump into a new system like that and so I need to keep this server running until at least November 2011. This week we had not one but two hard drives fail. Thankfully they are from different volumes and we're able to keep running for the moment, but given the close nature of these failures I have serious doubts that I'll be able to avoid catastrophic failure from this server through the November target as is without restoring the RAID redundancy — it'll only take one more drive failure anywhere and I'm completely hosed. We are fortunate enough to have exact match "spares" lying around for both drives, but the spares are in unknown condition. I tried swapping just them in, but the RAID controller isn't smart enough to handle this and it renders the system unbootable. As for the RAID controller itself, there is utility I can get into during POST via a Ctrl-A shortcut, but I can't do much useful from there. To actually manage volumes I must first boot in to Netware, at which point I can use CI/O Array Management Software Version 2.0 to actually look at volume information. I suspect that the normal way to manage things is to boot from a special floppy with the controller software on it, but that floppy is long gone. Going through the options in the RAID software, I think the only supported way to replace a disk in an existing RAID volume is to physically add the disk, boot up and configure it as a "spare" for a volume, force the volume to use the spare to replace an existing down disk (and at this point I'm only guessing) so that the down disk becomes the spare, repair the volume, remove the spare from the volume, and then shut down and remove the disk. Then start all over for the other failed disk. All this amounts to a lot of downtime, assuming I can even make it work and that my spares are any good. As for finding reliable spares, I have no clue where to even begin looking to find a new 4GB scsi drive, or even which exact scsi system I'm looking for, as it's gone through a few different iterations over time. Another option is to migrate this to a virtual machine (hyper-v), but all previous attempts we've made in this area have failed to get very far. When this machine was installed I was just graduating from high school, and so it requires lower level knowledge of netware and dos than I ever developed, or if I did have since forgotten (I'm not exactly a dos neophyte, either). Part of my problem is this is a high-use server, and taking it down for a few days to figure things out isn't gonna fly very well. As for the question, I'm looking for anything that might be helpful in this situation: a recommendation on a place to find good spares from this era, personal experience repairing RAID volumes using a similar controller or building a hyper-v vm from an old netware server, a line on a floppy with better software for the RAID controller, recommendation on a good Novell consultant in Nebraska that would be able to put things right, a whole other option I haven't considered yet, etc. Update: For backups, we have good (recently verified via restore) backups of the data only -- nothing for the software that actually runs things. Update 2: Just a progress report that I currently have a working Netware 3.12 install in VMWare Virtual Server 2.0, thanks largely to the guide I found here: http://cerbulescubogdan.blogspot.com/2010/11/novell-netware-312-on-vmware.html The next steps are preparing empty netware volumes to match the additional volumes on my existing server, taking a dump of everything on the C:\ drive and netware volumes on my existing server, and figuring out from that information what modules need added to netware, installing my licenses (we do still have that disk, if it's any good), and moving data over. I have approval to bring the server down for a week after the first of the year (sadly not before), so, aside from creating empty volumes, the rest of the work will have to wait until then. Final Update (Jan 5, 2011): I was able to get spares working in both raid arrays without data loss this week. Both are now listed by the controller as "FAULT TOLLERANT" (yay!). I was also able to build on the progress from my last update and now have a functional "spare" server in VMWare Server 2.0. The spare can run and use our erp software, but I can't put it into production because I can't (yet) print from that box (and I have no idea why). Even so, this VM will do in a pinch if I have no other choice, and between it and the repaired RAID arrays I'm comfortable pushing on until I can junk the machine in November.

Read the article
WiX 3 Tutorial: Understanding main WXS and WXI file

- by Mladen Prajdic

In the previous post we’ve taken a look at the WiX solution/project structure and project properties. We’re still playing with our super SuperForm application and today we’ll take a look at the general parts of the main wxs file, SuperForm.wxs, and the wxi include file. For wxs file we’ll just go over the general description of what each part does in the code comments. The more detailed descriptions will be in future posts about features themselves. WXI include file Include files are exactly what their name implies. To include a wxi file into the wxs file you have to put the wxi at the beginning of each .wxs file you wish to include it in. If you’ve ever worked with C++ you can think of the include files as .h files. For example if you include SuperFormVariables.wxi into the SuperForm.wxs, the variables in the wxi won’t be seen in FilesFragment.wxs or RegistryFragment.wxs. You’d have to include it manually into those two wxs files too. For preprocessor variable $(var.VariableName) to be seen by every file in the project you have to include them in the WiX project properties->Build->“Define preprocessor variables” textbox. This is why I’ve chosen not to go this route because in multi developer teams not everyone has the same directory structure and having a single variable would mean each developer would have to checkout the wixproj file to edit the variable. This is pretty much unacceptable by my standards. This is why we’ve added a System Environment variable named SuperFormFilesDir as is shown in the previous Wix Tutorial post. Because the FilesFragment.wxs is autogenerated on every project build we don’t want to change it manually each time by adding the include wxi at the beginning of the file. This way we couldn’t recreate it in each pre-build event. <?xml version="1.0" encoding="utf-8"?><Include>  <?define MajorVersion="1" ?> <?define MinorVersion="0" ?> <?define BuildVersion="0" ?>  <?define Revision="0" ?>  <?define VersionNumber="$(var.MajorVersion).$(var.MinorVersion).$(var.BuildVersion).$(var.Revision)" ?>  <?define UpgradeCode="YOUR-GUID-HERE" ?>  <?define ResourcesDir="$(var.ProjectDir)\Resources" ?>  <?define ExeProcessName="SuperForm.MainApp.exe" ?></Include> For now there’s no way to tell WiX in Visual Studio to have a wxi include file available to the whole project, so you have to include it in each file separately. Only variables set in “Define preprocessor variables” or System Environment variables are accessible to the whole project for now. The main WXS file: SuperForm.wxs We’ll only take a look at the general structure of the main SuperForm.wxs and not its the details. We’ll cover the details in future posts. The code comments should provide plenty info about what each part does in general. Basically there are 5 major parts. The update part, the conditions and actions part, the UI install sequence, the directory structure and the features we want to include. <?xml version="1.0" encoding="UTF-8"?><Wix xmlns="http://schemas.microsoft.com/wix/2006/wi" xmlns:util="http://schemas.microsoft.com/wix/UtilExtension">  <?include $(sys.CURRENTDIR)Includes\SuperFormVariables.wxi ?>  <Product Id="*" Name="!(loc.ProductName) $(var.VersionNumber)" Language="!(loc.LANG)" Version="$(var.VersionNumber)" Manufacturer="!(loc.ManufacturerName)" UpgradeCode="$(var.UpgradeCode)">  <Package InstallerVersion="300" Compressed="yes" InstallScope="perMachine"/> <Media Id="1" Cabinet="media1.cab" EmbedCab="yes" />  <Upgrade Id="$(var.UpgradeCode)"> <UpgradeVersion OnlyDetect="yes" Minimum="$(var.VersionNumber)" IncludeMinimum="no" Property="NEWER_VERSION_FOUND" /> <UpgradeVersion Minimum="0.0.0.0" IncludeMinimum="yes" Maximum="$(var.VersionNumber)" IncludeMaximum="no" Property="OLDER_VERSION_FOUND" /> </Upgrade>  <PropertyRef Id="NETFRAMEWORK35"/>  <Condition Message="!(loc.DotNetFrameworkNeeded)"> <![CDATA[Installed OR NETFRAMEWORK35]]> </Condition> <Condition Message="!(loc.AppNotSupported)"> <![CDATA[Installed OR ((VersionNT >= 501 AND ServicePackLevel >= 2) OR (VersionNT >= 502))]]> </Condition>  <CustomAction Id="NewerVersionFound" Error="!(loc.SuperFormNewerVersionInstalled)" /> <InstallExecuteSequence>  <Custom Action="NewerVersionFound" After="FindRelatedProducts"> <![CDATA[NEWER_VERSION_FOUND]]> </Custom>  <RemoveExistingProducts After="InstallInitialize"/>  <Custom Action="WixCloseApplications" Before="InstallInitialize" /> </InstallExecuteSequence>  <util:CloseApplication Id="CloseSuperForm" CloseMessage="no" Description="!(loc.MustCloseSuperForm)" ElevatedCloseMessage="no" RebootPrompt="no" Target="$(var.ExeProcessName)" />  <UIRef Id="WixUI_InstallDir" /> <UI>  <DialogRef Id="FilesInUse" /> <DialogRef Id="MsiRMFilesInUse" />  </UI>  <Icon Id="SuperFormIcon.ico" SourceFile="$(var.ResourcesDir)\Exclam.ico" /> <Property Id="ARPPRODUCTICON" Value="SuperFormIcon.ico" />   <Directory Id="TARGETDIR" Name="SourceDir"> <Directory Id="ProgramFilesFolder"> <Directory Id="INSTALLLOCATION" Name="!(loc.ProductName)" /> </Directory> </Directory>  <Property Id="WIXUI_INSTALLDIR" Value="INSTALLLOCATION" />  <Feature Id="SuperFormFeature" Title="!(loc.ProductName)" Level="1"> <ComponentGroupRef Id="SuperFormFiles" /> <ComponentRef Id="cmpVersionInRegistry" /> <ComponentRef Id="cmpIsThisUpdateInRegistry" /> </Feature> </Product></Wix> For more info on what certain attributes mean you should look into the WiX Documentation. WiX 3 tutorial by Mladen Prajdic navigation WiX 3 Tutorial: Solution/Project structure and Dev resources WiX 3 Tutorial: Understanding main wxs and wxi file WiX 3 Tutorial: Generating file/directory fragments with Heat.exe

Read the article
Processing Email in Outlook

- by Daniel Moth

A. Why Goal 1 = Help others: Have at most a 24-hour response turnaround to internal (from colleague) emails, typically achieving same day response. Goal 2 = Help projects: Not to implicitly pass/miss an opportunity to have impact on electronic discussions around any project on the radar. Not achieving goals 1 & 2 = Colleagues stop relying on you, drop you off conversations, don't see you as a contributing resource or someone that cares, you are perceived as someone with no peripheral vision. Note this is perfect if all you are doing is cruising at your job, trying to fly under the radar, with no ambitions of having impact beyond your absolute minimum 'day job'. B. DON'T: Leave unread email lurking around Don't: Receive or process all incoming emails in a single folder ('inbox' or 'unread mail'). This is actually possible if you receive a small number of emails (e.g. new to the job, not working at a company like Microsoft). Even so, with (your future) success at any level (company, community) comes large incoming email, so learn to deal with it. With large volumes, it is best to let the system help you by doing some categorization and filtering on your behalf (instead of trying to do that in your head as you process the single folder). See later section on how to achieve this. Don't: Leave emails as 'unread' (or worse: read them, then mark them as unread). Often done by individuals who think they possess super powers ("I can mentally cache and distinguish between the emails I chose not to read, the ones that are actually new, and the ones I decided to revisit in the future; the fact that they all show up the same (bold = unread) does not confuse me"). Interactions with this super-powered individuals typically end up with them saying stuff like "I must have missed that email you are talking about (from 2 weeks ago)" or "I am a bit behind, so I haven't read your email, can you remind me". TIP: The only place where you are "allowed" unread email is in your Deleted Items folder. Don't: Interpret a read email as an email that has been processed. Doing that, means you will always end up with fake unread email (that you have actually read, but haven't dealt with completely so you then marked it as unread) lurking between actual unread email. Another side effect is reading the email and making a 'mental' note to action it, then leaving the email as read, so the only thing left to remind you to carry out the action is… you. You are not super human, you will forget. This is a key distinction. Reading (or even scanning) a new email, means you now know what needs to be done with it, in order for it to be truly considered processed. Truly processing an email is to, for example, write an email of your own (e.g. to reply or forward), or take a non-email related action (e.g. create calendar entry, do something on some website), or read it carefully to gain some knowledge (e.g. it had a spec as an attachment), or keep it around as reference etc. 'Reading' means that you know what to do, not that you have done it. An email that is read is an email that is triaged, not an email that is resolved. Sometimes the thing that needs to be done based on receiving the email, you can (and want) to do immediately after reading the email. That is fine, you read the email and you processed it (typically when it takes no longer than X minutes, where X is your personal tolerance – mine is roughly 2 minutes). Other times, you decide that you don't want to spend X minutes at that moment, so after reading the email you need a quick system for "marking" the email as to be processed later (and you still leave it as 'read' in outlook). See later section for how. C. DO: Use Outlook rules and have multiple folders where incoming email is automatically moved to Outlook email rules are very powerful and easy to configure. Use them to automatically file email into folders. Here are mine (note that if a rule catches an email message then no further rules get processed): "personal" Email is either personal or business related. Almost all personal email goes to my gmail account. The personal emails that end up on my work email account, go to a dedicated folder – that is achieved via a rule that looks at the email's 'From' field. For those that slip through, I use the new Outlook 2010 quick step of "Conversation To Folder" feature to let the slippage only occur once per conversation, and then update my rules. "External" and "ViaBlog" The remaining external emails either come from my blog (rule on the subject line) or are unsolicited (rule on the domain name not being microsoft) and they are filed accordingly. "invites" I may do a separate blog post on calendar management, but suffice to say it should be kept up to date. All invite requests end up in this folder, so that even if mail gets out of control, the calendar can stay under control (only 1 folder to check). I.e. so I can let the organizer know why I won't be attending their meeting (or that I will be). Note: This folder is the only one that shows the total number of items in it, instead of the total unread. "Inbox" The only email that ends up here is email sent TO me and me only. Note that this is also the only email that shows up above the systray icon in the notification toast – all other emails cannot interrupt. "ToMe++" Email where I am on the TO line, but there are other recipients as well (on the TO or CC line). "CC" Email where I am on the CC line. I need to read these, but nobody is expecting a response or action from me so they are not as urgent (and if they are and follow up with me, they'll receive a link to this). "@ XYZ" Emails to aliases that are about projects that I directly work on (and I wasn't on the TO or CC line, of course). Test: these projects are in my commitments that I get measured on at the end of the year. "Z Mass" and subfolders under it per distribution list (DL) Emails to aliases that are about topics that I am interested in, but not that I formally own/contribute to. Test: if I unsubscribed from these aliases, nobody could rightfully complain. "Admin" folder, which resides under "Z Mass" folder Emails to aliases that I was added typically by an admin, e.g. broad emails to the floor/group/org/building/division/company that I am a member of. "BCC" folder, which resides under "Z Mass" Emails where I was not on the TO or the CC line explicitly and the alias it was sent to is not one I explicitly subscribed to (or I have been added to the BCC line, which I briefly touched on in another post). When there are only a few quick minutes to catch up on email, read as much as possible from these folders, in this order: Invites, Inbox, ToMe++. Only when these folders are all read (remember that doesn't mean that each email in them has been fully dealt with), we can move on to the @XYZ and then the CC folders. Only when those are read we can go on to the remaining folders. Note that the typical flow in the "Z Mass" subfolders is to scan subject lines and use the new Ctrl+Delete Outlook 2010 feature to ignore conversations. D. DO: Use Outlook Search folders in combination with categories As you process each folder, when you open a new email (i.e. click on it and read it in the preview pane) the email becomes read and stays read and you have to decide whether: It can take 2 minutes to deal with for good, right now, or It will take longer than 2 minutes, so it needs to be postponed with a clear next step, which is one of ToReply – there may be intermediate action steps, but ultimately someone else needs to receive email about this Action – no email is required, but I need to do something ReadLater – no email is required from the quick scan, but this is too long to fully read now, so it needs to be read it later WaitingFor – the email is informing of an intermediate status and 'promising' a future email update. Need to track. SomedayMaybe – interesting but not important, non-urgent, non-time-bound information. I may want to spend part of one of my weekends reading it. For all these 'next steps' use Outlook categories (right click on the email and assign category, or use shortcut key). Note that I also use category 'WaitingFor' for email that I send where I am expecting a response and need to track it. Create a new search folder for each category (I dragged the search folders into my favorites at the top left of Outlook, above my inboxes). So after the activity of reading/triaging email in the normal folders (where the email arrived) is done, the result is a bunch of emails appearing in the search folders (configure them to show the total items, not the total unread items). To actually process email (that takes more than 2 minutes to deal with) process the search folders, starting with ToReply and Action. E. DO: Get into a Routine Now you have a system in place, get into a routine of using it. Here is how I personally use mine, but this part I keep tweaking: Spend short bursts of time (between meetings, during boring but mandatory meetings and, in general, 2-4 times a day) aiming to have no unread emails (and in the process deal with some emails that take less than 2 minutes). Spend around 30 minutes at the end of each day processing most urgent items in search folders. Spend as long as it takes each Friday (or even the weekend) ensuring there is no unnecessary email baggage carried forward to the following week. F. Other resources Official Outlook help on: Create custom actions rules, Manage e-mail messages with rules, creating a search folder. Video on ignoring conversations (Ctrl+Del). Official blog post on Quick Steps and in particular the Move Conversation to folder. If you've read "Getting Things Done" it is very obvious that my approach to email management is driven by GTD. A very similar approach was described previously by ScottHa (also influenced by GTD), worth reading here. He also described how he sets up 2 outlook rules ('invites' and 'external') which I also use – worth reading that too. Comments about this post welcome at the original blog.

Read the article
Processing Email in Outlook

- by Daniel Moth

A. Why Goal 1 = Help others: Have at most a 24-hour response turnaround to internal (from colleague) emails, typically achieving same day response. Goal 2 = Help projects: Not to implicitly pass/miss an opportunity to have impact on electronic discussions around any project on the radar. Not achieving goals 1 & 2 = Colleagues stop relying on you, drop you off conversations, don't see you as a contributing resource or someone that cares, you are perceived as someone with no peripheral vision. Note this is perfect if all you are doing is cruising at your job, trying to fly under the radar, with no ambitions of having impact beyond your absolute minimum 'day job'. B. DON'T: Leave unread email lurking around Don't: Receive or process all incoming emails in a single folder ('inbox' or 'unread mail'). This is actually possible if you receive a small number of emails (e.g. new to the job, not working at a company like Microsoft). Even so, with (your future) success at any level (company, community) comes large incoming email, so learn to deal with it. With large volumes, it is best to let the system help you by doing some categorization and filtering on your behalf (instead of trying to do that in your head as you process the single folder). See later section on how to achieve this. Don't: Leave emails as 'unread' (or worse: read them, then mark them as unread). Often done by individuals who think they possess super powers ("I can mentally cache and distinguish between the emails I chose not to read, the ones that are actually new, and the ones I decided to revisit in the future; the fact that they all show up the same (bold = unread) does not confuse me"). Interactions with this super-powered individuals typically end up with them saying stuff like "I must have missed that email you are talking about (from 2 weeks ago)" or "I am a bit behind, so I haven't read your email, can you remind me". TIP: The only place where you are "allowed" unread email is in your Deleted Items folder. Don't: Interpret a read email as an email that has been processed. Doing that, means you will always end up with fake unread email (that you have actually read, but haven't dealt with completely so you then marked it as unread) lurking between actual unread email. Another side effect is reading the email and making a 'mental' note to action it, then leaving the email as read, so the only thing left to remind you to carry out the action is… you. You are not super human, you will forget. This is a key distinction. Reading (or even scanning) a new email, means you now know what needs to be done with it, in order for it to be truly considered processed. Truly processing an email is to, for example, write an email of your own (e.g. to reply or forward), or take a non-email related action (e.g. create calendar entry, do something on some website), or read it carefully to gain some knowledge (e.g. it had a spec as an attachment), or keep it around as reference etc. 'Reading' means that you know what to do, not that you have done it. An email that is read is an email that is triaged, not an email that is resolved. Sometimes the thing that needs to be done based on receiving the email, you can (and want) to do immediately after reading the email. That is fine, you read the email and you processed it (typically when it takes no longer than X minutes, where X is your personal tolerance – mine is roughly 2 minutes). Other times, you decide that you don't want to spend X minutes at that moment, so after reading the email you need a quick system for "marking" the email as to be processed later (and you still leave it as 'read' in outlook). See later section for how. C. DO: Use Outlook rules and have multiple folders where incoming email is automatically moved to Outlook email rules are very powerful and easy to configure. Use them to automatically file email into folders. Here are mine (note that if a rule catches an email message then no further rules get processed): "personal" Email is either personal or business related. Almost all personal email goes to my gmail account. The personal emails that end up on my work email account, go to a dedicated folder – that is achieved via a rule that looks at the email's 'From' field. For those that slip through, I use the new Outlook 2010 quick step of "Conversation To Folder" feature to let the slippage only occur once per conversation, and then update my rules. "External" and "ViaBlog" The remaining external emails either come from my blog (rule on the subject line) or are unsolicited (rule on the domain name not being microsoft) and they are filed accordingly. "invites" I may do a separate blog post on calendar management, but suffice to say it should be kept up to date. All invite requests end up in this folder, so that even if mail gets out of control, the calendar can stay under control (only 1 folder to check). I.e. so I can let the organizer know why I won't be attending their meeting (or that I will be). Note: This folder is the only one that shows the total number of items in it, instead of the total unread. "Inbox" The only email that ends up here is email sent TO me and me only. Note that this is also the only email that shows up above the systray icon in the notification toast – all other emails cannot interrupt. "ToMe++" Email where I am on the TO line, but there are other recipients as well (on the TO or CC line). "CC" Email where I am on the CC line. I need to read these, but nobody is expecting a response or action from me so they are not as urgent (and if they are and follow up with me, they'll receive a link to this). "@ XYZ" Emails to aliases that are about projects that I directly work on (and I wasn't on the TO or CC line, of course). Test: these projects are in my commitments that I get measured on at the end of the year. "Z Mass" and subfolders under it per distribution list (DL) Emails to aliases that are about topics that I am interested in, but not that I formally own/contribute to. Test: if I unsubscribed from these aliases, nobody could rightfully complain. "Admin" folder, which resides under "Z Mass" folder Emails to aliases that I was added typically by an admin, e.g. broad emails to the floor/group/org/building/division/company that I am a member of. "BCC" folder, which resides under "Z Mass" Emails where I was not on the TO or the CC line explicitly and the alias it was sent to is not one I explicitly subscribed to (or I have been added to the BCC line, which I briefly touched on in another post). When there are only a few quick minutes to catch up on email, read as much as possible from these folders, in this order: Invites, Inbox, ToMe++. Only when these folders are all read (remember that doesn't mean that each email in them has been fully dealt with), we can move on to the @XYZ and then the CC folders. Only when those are read we can go on to the remaining folders. Note that the typical flow in the "Z Mass" subfolders is to scan subject lines and use the new Ctrl+Delete Outlook 2010 feature to ignore conversations. D. DO: Use Outlook Search folders in combination with categories As you process each folder, when you open a new email (i.e. click on it and read it in the preview pane) the email becomes read and stays read and you have to decide whether: It can take 2 minutes to deal with for good, right now, or It will take longer than 2 minutes, so it needs to be postponed with a clear next step, which is one of ToReply – there may be intermediate action steps, but ultimately someone else needs to receive email about this Action – no email is required, but I need to do something ReadLater – no email is required from the quick scan, but this is too long to fully read now, so it needs to be read it later WaitingFor – the email is informing of an intermediate status and 'promising' a future email update. Need to track. SomedayMaybe – interesting but not important, non-urgent, non-time-bound information. I may want to spend part of one of my weekends reading it. For all these 'next steps' use Outlook categories (right click on the email and assign category, or use shortcut key). Note that I also use category 'WaitingFor' for email that I send where I am expecting a response and need to track it. Create a new search folder for each category (I dragged the search folders into my favorites at the top left of Outlook, above my inboxes). So after the activity of reading/triaging email in the normal folders (where the email arrived) is done, the result is a bunch of emails appearing in the search folders (configure them to show the total items, not the total unread items). To actually process email (that takes more than 2 minutes to deal with) process the search folders, starting with ToReply and Action. E. DO: Get into a Routine Now you have a system in place, get into a routine of using it. Here is how I personally use mine, but this part I keep tweaking: Spend short bursts of time (between meetings, during boring but mandatory meetings and, in general, 2-4 times a day) aiming to have no unread emails (and in the process deal with some emails that take less than 2 minutes). Spend around 30 minutes at the end of each day processing most urgent items in search folders. Spend as long as it takes each Friday (or even the weekend) ensuring there is no unnecessary email baggage carried forward to the following week. F. Other resources Official Outlook help on: Create custom actions rules, Manage e-mail messages with rules, creating a search folder. Video on ignoring conversations (Ctrl+Del). Official blog post on Quick Steps and in particular the Move Conversation to folder. If you've read "Getting Things Done" it is very obvious that my approach to email management is driven by GTD. A very similar approach was described previously by ScottHa (also influenced by GTD), worth reading here. He also described how he sets up 2 outlook rules ('invites' and 'external') which I also use – worth reading that too. Comments about this post welcome at the original blog.

Read the article
Silverlight 4 Training Kit

- by ScottGu

We recently released a new free Silverlight 4 Training Kit that walks you through building business applications with Silverlight 4. You can browse the training kit online or alternatively download an entire offline version of the training kit. The training material is structured on teaching how to use the new Silverlight 4 features to build an end to end business application. The training kit includes 8 modules, 25 videos, and several hands on labs. Below is a breakdown and links to all of the content. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Module 1: Introduction Click here to watch this module. In this video John Papa and Ian Griffiths discuss the key areas that the Building Business Applications with Silverlight 4 course focuses on. This module is the overview of the course and covers many key scenarios that are faced when building business applications, and how Silverlight can help address them. Module 2: WCF RIA Services Click here to explore this module. In this lab, you will create a web site for managing conferences that will be the basis for the other labs in this course. Don’t worry if you don’t complete a particular lab in the series – all lab manual instructions are accompanied by completed solutions, so you can either build your own solution from start to finish, or dive straight in at any point using the solutions provided as a starting point. In this lab you will learn how to set up WCF RIA Services, create bindings to the domain context, filter using the domain data source, and create domain service queries. Online Link Download Source Download Lab Document Videos Module 2.1 - WCF RIA Services Ian Griffiths sets up the Entity Framework and WCF RIA Services for the sample Event Manager application for the course. He covers how to set up the services, how the Domain Services work and the role that the DomainContext plays in the sample application. He also reviews the metadata classes and integrating the navigation framework. Module 2.2 – Using WCF RIA Services to Edit Entities Ian Griffiths discusses how he adds the ability to edit and create individual entities with the features built into WCF RIA Services into the sample Event Manager application. He covers data binding fundamentals, IQueryable, LINQ, the DomainDataSource, navigation to a single entity using the navigation framework, and how to use the Visual Studio designer to do much of the work . Module 2.3 – Showing Master/Details Records Using WCF RIA Services Ian Griffiths reviews how to display master/detail records for the sample Event Manager application using WCF RIA Services. He covers how to use the Include attribute to indicate which elements to serialize back to the client. Ian also demonstrates how to use the Data Sources window in the designer to add and bind controls to specific data elements. He wraps up by showing how to create custom services to the Domain Services. Module 3 – Authentication, Validation, MVVM, Commands, Implicit Styles and RichTextBox Click here to visit this module. This lab demonstrates how to build a login screen, integrate ASP.NET authentication, and perform validation on data elements. Model-View-ViewModel (MVVM) is introduced and used in this lab as a pattern to help separate the UI and business logic. You will also learn how to use implicit styling and the new RichTextBox control. Online Link Download Source Download Lab Document Videos Module 3.1 – Authentication Ian Griffiths covers how to integrate a login screen and authentication into the sample Event Manager application. Ian shows how to use the ASP.NET authentication and integrate it into WCF RIA Services and the Silverlight presentation layer. Module 3.2 – MVVM Ian Griffiths covers how to Model-View-ViewModel (MVVM) patterns into the sample Event Manager application. He discusses why MVVM exists, what separated presentation means, and why it is important. He shows how to connect the View to the ViewModel, why data binding is important in this symbiosis, and how everything fits together in the overall application. Module 3.3 –Validation Ian Griffiths discusses how validation of user input can be integrated into the sample Event Manager application. He demonstrates how to use the DataAnnotations, the INotifyDataErrorInfo interface, binding markup extensions, and WCF RIA Services in concert to achieve great validation in the sample application. He discusses how this technique allows for property level validation, entity level validation, and asynchronous server side validation. Module 3.4 – Implicit Styles Ian Griffiths discusses how why implicit styles are important and how they can be integrated into the sample Event Manager application. He shows how implicit styles defined in a resource dictionary can be applied to all elements of a particular kind throughout the application. Module 3.5 – RichTextBox Ian Griffiths discusses how the new RichTextBox control and it can be integrated into the sample Event Manager application. He demonstrates how the RichTextBox can provide editing for the event information and how it can display the rich text for selection and copying. Module 4 – User Profiles, Drop Targets, Webcam and Clipboard Click here to visit this module. This lab builds new features into the sample application to take the user's photo. It teaches you how to use the webcam to capture an image, use Silverlight as a drop target, and take advantage of programmatic access to the clipboard. Link Download Source Download Lab Document Videos Module 4.1 – Webcam Ian Griffiths demonstrates how the webcam adds value to the sample Event Manager application by capturing an image of the attendee. He discusses the VideoCaptureDevice, the CaptureDviceConfiguration, and the CaptureSource classes and how they allow audio and video to be captured so you can grab an image from the capture device and save it. Module 4.2 - Drag and Drop in Silverlight Ian Griffiths demonstrates how to capture and handle the Drop in the sample Event Manager application so the user can drag a photo from a file and drop it into the application. Ian reviews the AllowDrop property, the Drop event, how to access the file that can be dropped, and the other drag related events. He also reviews how to make this work across browsers and the challenges for this. Module 5 – Schedule Planner and Right Mouse Click Click here to visit this module. This lab builds on the application to allow grouping in the DataGrid and implement right mouse click features to add context menu support. Link Download Source Download Lab Document Videos Module 5.1 – Grouping and Binding Ian Griffiths demonstrates how to use the grouping features for data binding in the DataGrid and how it applies to the sample Event Manager application. He reviews the role of the CollectionViewSource in grouping, customizing the templates for headers, and how to work with grouping with ItemsControls. Module 5.2 – Layout Visual States Ian Griffiths demonstrates how to use the Fluid UI animation support for visual states in the ListBox control DataGrid and how it applies to the sample Event Manager application. He reviews the 3 visual states of BeforeLoaded, AfterLoaded, and BeforeUnloaded. Module 5.3 – Right Mouse Click Ian Griffiths demonstrates how to add support for handling the right mouse button click event to display a context menu for the Event Manager application. He demonstrates how to handle the event, show a custom context menu control, and integrate it into the scheduling portion of the application. Module 6 – Printing the Schedule Click here to visit this module. This lab teaches how to use the new printing features in Silverlight 4. The lab walks through the PrintDocument class and the ViewBox control, while showing how to print multiple pages of content using them. Link Download Source Download Lab Document Videos Module 6.1 – Printing and the Viewbox Ian Griffiths demonstrates how to add the ability to print the schedule to the sample Event Manager application. He walks through the importance of the PrintDocument class and its members. He also shows how to handle printing the visual tree and how the ViewBox control can help. Module 6.2 – Multi Page Printing Ian Griffiths expands on his printing discussion by showing how to handle printing multiple pages of content for the sample Event Manager application. He shows how to paginate the content and points out various tips to keep in mind when determining the printable area. Module 7 – Running the Event Dashboard Out of Browser Click here to visit this module. This lab builds a dashboard for the sample application while explaining the fundamentals of the out of browser features, how to handle authentication, displaying notifications (toasts), and how to use native integration to use COM Interop with Silverlight. Link Download Source Download Lab Document Videos Module 7.1 – Out of Browser Ian Griffiths discusses the role of an Out of Browser application for administrators to manage the events and users in the sample Event Manager application. He discusses several reasons why out of browser applications may better suit your needs including custom chrome, toasts, window placement, cross domain access, and file access. He demonstrates the basic technique to take your application and make it work out of browser using the tools. Module 7.2 – NotificationWindow (Toasts) for Elevated Trust Out of Browser Applications Ian Griffiths discusses the how toasts can be used in the sample Event Manager application to show information that may require the user's attention. Ian covers how to create a toast using the NotificationWindow, security implications, and how to make the toast appear as needed. Module 7.3 – Out of Browser Window Placement Ian Griffiths discusses the how to manage the window positioning when building an out of browser application, handling the windows state, and controlling and handling activation of the window. Module 7.4 – Out of Browser Elevated Trust Application Overview Ian Griffiths discusses the implications of creating trusted out of browser application for the Event Manager sample application. He reviews why you might want to use elevated trust, what features is opens to you, and how to take advantage of them. Topics Ian covers include the dynamic keyword in C# 4, the AutomationFactory class, the API to check if you are in a trusted application, and communicating with Excel. Module 8 – Advanced Out of Browser and MEF Click here to visit this module. This hands-on lab walks through the creation of a trusted out of browser application and the new functionality that comes with that. You will learn to use COM Automation, handle the window closing event, set custom window chrome, digitally sign your Silverlight out of browser trusted application, create a silent install option, and take advantage of MEF. Link Download Source Download Lab Document Videos Module 8.1 – Custom Window Chrome for Elevated Trust Out of Browser Applications Ian Griffiths discusses how to replace the standard operating system window chrome with customized chrome for an elevated trusted out of browser application. He covers how it is important to handle close, resize, minimize, and maximize events. Ian mentions that the tooling was not ready when he shot this video, but the good news is that the tooling now supports setting the custom chrome directly from the property page for the Silverlight application. Module 8.2 – Window Closing Event for Out of Browser Applications Ian Griffiths discusses the WindowClosing event and how to handle and optionally cancel the event. Module 8.3 – Silent Install of Out of Browser Applications Ian Griffiths discusses how to use the SLLauncher executable to install an out of browser application. He discusses the optional command line switches that can be set including how the emulate switch can help you emulate the install process. Ian also shows how to setup a shortcut for the application and tell the application where it should look for future updates online. Module 8.4 – Digitally Signing Out of Browser Application Ian Griffiths discusses how and why to digitally sign an out of browser application using the signtool program. He covers what trusted certificates are, the implications of signing (or not signing), and the effect on the user experience. Module 8.5 – The Value of MEF with Silverlight Ian Griffiths discusses what MEF is, how your application can benefit from it, and the fundamental features it puts at your disposal. He covers the 3 step import, export and compose process as well as how to dynamically import XAP files using MEF. Summary As you can probably tell from the long list above – this series contains a ton of great content, and hopefully provides a nice end-to-end walkthrough that helps explain how to take advantage of Silverlight 4 (and all its new features). Hope this helps, Scott

Read the article
Visual Studio 2010 Extension Manager (and the new VS 2010 PowerCommands Extension)

- by ScottGu

This is the twenty-third in a series of blog posts I’m doing on the VS 2010 and .NET 4 release. Today’s blog post covers some of the extensibility improvements made in VS 2010 – as well as a cool new "PowerCommands for Visual Studio 2010” extension that Microsoft just released (and which can be downloaded and used for free). [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Extensibility in VS 2010 VS 2010 provides a much richer extensibility model than previous releases. Anyone can build extensions that add, customize, and light-up the Visual Studio 2010 IDE, Code Editors, Project System and associated Designers. VS 2010 Extensions can be created using the new MEF (Managed Extensibility Framework) which is built-into .NET 4. You can learn more about how to create VS 2010 extensions from this this blog post from the Visual Studio Team Blog. VS 2010 Extension Manager Developers building extensions can distribute them on their own (via their own web-sites or by selling them). Visual Studio 2010 also now includes a built-in “Extension Manager” within the IDE that makes it much easier for developers to find, download, and enable extensions online. You can launch the “Extension Manager” by selecting the Tools->Extension Manager menu option: This loads an “Extension Manager” dialog which accesses an “online gallery” at Microsoft, and then populates a list of available extensions that you can optionally download and enable within your copy of Visual Studio: There are already hundreds of cool extensions populated within the online gallery. You can browse them by category (use the tree-view on the top-left to filter them). Clicking “download” on any of the extensions will download, install, and enable it. PowerCommands for Visual Studio 2010 This weekend Microsoft released the free PowerCommands for Visual Studio 2010 extension to the online gallery. You can learn more about it here, and download and install it via the “Extension Manager” above (search for PowerCommands to find it). The PowerCommands download adds dozens of useful commands to Visual Studio 2010. Below is a screen-shot of just a few of the useful commands that it adds to the Solution Explorer context menus: Below is a list of all the commands included with this weekend’s PowerCommands for Visual Studio 2010 release: Enable/Disable PowerCommands in Options dialog This feature allows you to select which commands to enable in the Visual Studio IDE. Point to the Tools menu, then click Options. Expand the PowerCommands options, then click Commands. Check the commands you would like to enable. Note: All power commands are initially defaulted Enabled. Format document on save / Remove and Sort Usings on save The Format document on save option formats the tabs, spaces, and so on of the document being saved. It is equivalent to pointing to the Edit menu, clicking Advanced, and then clicking Format Document. The Remove and sort usings option removes unused using statements and sorts the remaining using statements in the document being saved. Note: The Remove and sort usings option is only available for C# documents. Format document on save and Remove and sort usings both are initially defaulted OFF. Clear All Panes This command clears all output panes. It can be executed from the button on the toolbar of the Output window. Copy Path This command copies the full path of the currently selected item to the clipboard. It can be executed by right-clicking one of these nodes in the Solution Explorer: The solution node; A project node; Any project item node; Any folder. Email CodeSnippet To email the lines of text you select in the code editor, right-click anywhere in the editor and then click Email CodeSnippet. Insert Guid Attribute This command adds a Guid attribute to a selected class. From the code editor, right-click anywhere within the class definition, then click Insert Guid Attribute. Show All Files This command shows the hidden files in all projects displayed in the Solution Explorer when the solution node is selected. It enhances the Show All Files button, which normally shows only the hidden files in the selected project node. Undo Close This command reopens a closed document , returning the cursor to its last position. To reopen the most recently closed document, point to the Edit menu, then click Undo Close. Alternately, you can use the CtrlShiftZ shortcut. To reopen any other recently closed document, point to the View menu, click Other Windows, and then click Undo Close Window. The Undo Close window appears, typically next to the Output window. Double-click any document in the list to reopen it. Collapse Projects This command collapses a project or projects in the Solution Explorer starting from the root selected node. Collapsing a project can increase the readability of the solution. This command can be executed from three different places: solution, solution folders and project nodes respectively. Copy Class This command copies a selected class entire content to the clipboard, renaming the class. This command is normally followed by a Paste Class command, which renames the class to avoid a compilation error. It can be executed from a single project item or a project item with dependent sub items. Paste Class This command pastes a class entire content from the clipboard, renaming the class to avoid a compilation error. This command is normally preceded by a Copy Class command. It can be executed from a project or folder node. Copy References This command copies a reference or set of references to the clipboard. It can be executed from the references node, a single reference node or set of reference nodes. Paste References This command pastes a reference or set of references from the clipboard. It can be executed from different places depending on the type of project. For CSharp projects it can be executed from the references node. For Visual Basic and Website projects it can be executed from the project node. Copy As Project Reference This command copies a project as a project reference to the clipboard. It can be executed from a project node. Edit Project File This command opens the MSBuild project file for a selected project inside Visual Studio. It combines the existing Unload Project and Edit Project commands. Open Containing Folder This command opens a Windows Explorer window pointing to the physical path of a selected item. It can be executed from a project item node Open Command Prompt This command opens a Visual Studio command prompt pointing to the physical path of a selected item. It can be executed from four different places: solution, project, folder and project item nodes respectively. Unload Projects This command unloads all projects in a solution. This can be useful in MSBuild scenarios when multiple projects are being edited. This command can be executed from the solution node. Reload Projects This command reloads all unloaded projects in a solution. It can be executed from the solution node. Remove and Sort Usings This command removes and sort using statements for all classes given a project. It is useful, for example, in removing or organizing the using statements generated by a wizard. This command can be executed from a solution node or a single project node. Extract Constant This command creates a constant definition statement for a selected text. Extracting a constant effectively names a literal value, which can improve readability. This command can be executed from the code editor by right-clicking selected text. Clear Recent File List This command clears the Visual Studio recent file list. The Clear Recent File List command brings up a Clear File dialog which allows any or all recent files to be selected. Clear Recent Project List This command clears the Visual Studio recent project list. The Clear Recent Project List command brings up a Clear File dialog which allows any or all recent projects to be selected. Transform Templates This command executes a custom tool with associated text templates items. It can be executed from a DSL project node or a DSL folder node. Close All This command closes all documents. It can be executed from a document tab. How to temporarily disable extensions Extensions provide a great way to make Visual Studio even more powerful, and can help improve your overall productivity. One thing to keep in mind, though, is that extensions run within the Visual Studio process (DevEnv.exe) and so a bug within an extension can impact both the stability and performance of Visual Studio. If you ever run into a situation where things seem slower than they should, or if you crash repeatedly, please temporarily disable any installed extensions and see if that fixes the problem. You can do this for extensions that were installed via the online gallery by re-running the extension manager (using the Tools->Extension Manager menu option) and by selecting the “Installed Extensions” node on the top-left of the dialog – and then by clicking “Disable” on any of the extensions within your installed list: Hope this helps, Scott

Read the article
CodePlex Daily Summary for Sunday, February 20, 2011

CodePlex Daily Summary for Sunday, February 20, 2011Popular ReleasesView Layout Replicator for Microsoft Dynamics CRM 2011: View Layout Replicator (1.0.119.18): Initial releaseWindows Phone 7 Isolated Storage Explorer: WP7 Isolated Storage Explorer v1.0 Beta: Current release features:WPF desktop explorer client Visual Studio integrated tool window explorer client (Visual Studio 2010 Professional and above) Supported operations: Refresh (isolated storage information), Add Folder, Add Existing Item, Download File, Delete Folder, Delete File Explorer supports operations running on multiple remote applications at the same time Explorer detects application disconnect (1-2 second delay) Explorer confirms operation completed status Explorer d...Advanced Explorer for Wp7: Advanced Explorer for Wp7 Version 1.4 Test8: Added option to run under Lockscreen. Fixed a bug when you open a pdf/mobi file without starting adobe reader/amazon kindle first boost loading time for folders added \Windows directory (all devices) you can now interact with the filesystem while it is loading!Game Files Open - Map Editor: Game Files Open - Map Editor Beta 2 v1.0.0.0: The 2° beta release of the Map Editor, we have fixed a big bug of the files regen.Document.Editor: 2011.6: Whats new for Document.Editor 2011.6: New Left to Right and Left to Right support New Indent more/less support Improved Home tab Improved Tooltips/shortcut keys Minor Bug Fix's, improvements and speed upsCatel - WPF and Silverlight MVVM library: 1.2: Catel history ============= (+) Added (*) Changed (-) Removed (x) Error / bug (fix) For more information about issues or new feature requests, please visit: http://catel.codeplex.com =========== Version 1.2 =========== Release date: ============= 2011/02/17 Added/fixed: ============ (+) DataObjectBase now supports Isolated Storage out of the box: Person.Save(myStream) stores a whole object graph in Silverlight (+) DataObjectBase can now be converted to Json via Person.ToJson(); (+)...??????????: All-In-One Code Framework ??? 2011-02-18: ?????All-In-One Code Framework?2011??????????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????，?????AzureBingMaps??????，??Azure，WCF, Silverlight, Window Phone????????，????????????????????????。 ???： Windows Azure SQL Azure Windows Azure AppFabric Windows Live Messenger Connect Bing Maps ?????： ??????HTML??? ??Windows PC?Mac?Silverlight??? ??Windows Phone?Silverlight??? ?????：http://blog.csdn.net/sjb5201/archive/2011...Image.Viewer: 2011: First version of 2011Silverlight Toolkit: Silverlight for Windows Phone Toolkit - Feb 2011: Silverlight for Windows Phone Toolkit OverviewSilverlight for Windows Phone Toolkit offers developers additional controls for Windows Phone application development, designed to match the rich user experience of the Windows Phone 7. Suggestions? Features? Questions? Ask questions in the Create.msdn.com forum. Add bugs or feature requests to the Issue Tracker. Help us shape the Silverlight Toolkit with your feedback! Please clearly indicate that the work items and issues are for the phone t...VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 29 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) Build 29 (beta)New: Added VsTortoise Solution Explorer integration for Web Project Folder, Web Folder and Web Item. Fix: TortoiseProc was called with invalid parameters, when using TSVN 1.4.x or older #7338 (thanks psifive) Fix: Add-in does not work, when "TortoiseSVN/bin" is not added to PATH environment variable #7357 Fix: Missing error message when ...Sense/Net CMS - Enterprise Content Management: SenseNet 6.0.3 Community Edition: Sense/Net 6.0.3 Community Edition We are happy to introduce you the latest version of Sense/Net with integrated ECM Workflow capabilities! In the past weeks we have been working hard to migrate the product to .Net 4 and include a workflow framework in Sense/Net built upon Windows Workflow Foundation 4. This brand new feature enables developers to define and develop workflows, and supports users when building and setting up complicated business processes involving content creation and response...thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.11): Features Added a new option that allows properties on data contract types to be marked as virtual. Bug Fixes Fixed a bug caused by certain project properties not being available on Web Service Software Factory projects. Fixed a bug that could result in the WrapperName value of the MessageContractAttribute being incorrect when the Adjust Casing option is used. The menu item code now caters for CommandBar instances that are not available. For example the Web Item CommandBar does not exist ...Terminals: Version 2 - RC1: The "Clean Install" will overwrite your log4net configuration (if you have one). If you run in a Portable Environment, you can use the "Clean Install" and target your portable folder. Tested and it works fine. Changes for this release: Re-worked on the Toolstip settings are done, just to avoid the vs.net clash with auto-generating files for .settings files. renamed it to .settings.config Packged both log4net and ToolStripSettings files into the installer Upgraded the version inform...SQL Server Process Info Log: Release: releaseAllNewsManager.NET: AllNewsManager.NET 1.3: AllNewsManager.NET 1.3. This new version provide several new features, improvements and bug fixes. Some new features: Online Users. Avatars. Copy function (to create a new article from another one). SEO improvements (friendly urls). New admin buttons. And more...Facebook Graph Toolkit: Facebook Graph Toolkit 0.8: Version 0.8 (15 Feb 2011)moved to Beta stage publish photo feature "email" field of User object added new Graph Api object: Group, Event new Graph Api connection: likes, groups, eventsDJME - The jQuery extensions for ASP.NET MVC: DJME2 -The jQuery extensions for ASP.NET MVC beta2: The source code and runtime library for DJME2. For more product info you can goto http://www.dotnetage.com/djme.html What is new ?The Grid extension added The ModelBinder added which helping you create Bindable data Action. The DnaFor() control factory added that enabled Model bindable extensions. Enhance the ListBox , ComboBox data binding.Jint - Javascript Interpreter for .NET: Jint - 0.9.0: New CLR interoperability features Many bugfixesBuild Version Increment Add-In Visual Studio: Build Version Increment v2.4.11046.2045: v2.4.11046.2045 Fixes and/or Improvements:Major: Added complete support for VC projects including .vcxproj & .vcproj. All padding issues fixed. A project's assembly versions are only changed if the project has been modified. Minor Order of versioning style values is now according to their respective positions in the attributes i.e. Major, Minor, Build, Revision. Fixed issue with global variable storage with some projects. Fixed issue where if a project item's file does not exist, a ...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.1: Coding4Fun.Phone.Toolkit v1.1 release. Bug fixes and minor feature requests addedNew Projects.NET Core Audio APIs: This project provides a lightweight set of .NET wrappers around each section of the Windows Core Audio APIs.Akwen: Akwen aspirantbigserve: made in load sof languages a serve ralternative to iis and apacheCathedral game framework: (Will eventually be) A framework for creating 2d region-based games in Silverlight.Gmail Like File Uploader In .NET: Many times I wounder, How does gmail uploads files and monitor the upload status. I suppose many of you also have gone through the same experience. Most of you knows that the Choose File button on the Gmail Page is actually a flash button but how about the progressbar? AJAX rightinicomInterface: ????ini???????COM??iOnlineExamCenter - Trung Tâm Thi Tr?c Tuy?n: Tìm hi?u các phuong pháp thi tr?c nghi?m . Áp d?ng xây d?ng trung tâm thi tr?c tuy?n. ?ng d?ng du?c xây d?ng d?a trên n?n t?ng - .NET Framework v4.0 - ASP.NET MVC v3 - Entity Framework v4 - Silverlight v4 - jQueryLee Utility Library: Lee Utility LibrarySocialCore: Social Core is a framework for developing Social applications using a distributed infrastructure. The focus of Social Core is on collaboration, security and transparency. Privacy is not dead, it just is not implemented correctly.TestAmazonCloud: tacTftp.Net: This projects implements the TFTP (Trivial File Transfer) protocol for .NET in an easy-to-use library. It allows you to integrate TFTP client and server functionality into your project. It is s table, unit-tested and comes with a sample TFTP client and server.Using the Repository Pattern and DI to switch between SQL and XML: This is an example application, showing how Dependency Injection and the Repository can be used to allow interchangeable persistence between XML and SQLWebForms Razor converter - WinForms: Telerik developed a command line "WebForms to Razor (CSHTML) conversion tool" and uploaded in git -https://github.com/telerik/razor-converter This project uses the same Telerik API, but the client is the GUI/WinForms and allow developer to convert multiple files in a one go.XNA and Dependency Injection: Test code sample for XNA and Dependency Injection.XNA and IoC Container: Test code sample for XNA and IoC Container.XNA and Unit Testing: Test code sample for XNA and Unit Testing.Xplore World: Xplore World es un navegador web avanzado disponible para Windows Xp/Vista/7 y actualmente solo está disponible en español. Con este navegador puedes hacer cosas maravillosas como ver imágenes de cualquier web a tu estilo, administrar los usuarios, modificar tus marcadores, etc.ZO (ZeroOne): ZeroOne is the editor for programmers who think in binary.

Read the article
Project Navigation and File Nesting in ASP.NET MVC Projects

- by Rick Strahl

More and more I’m finding myself getting lost in the files in some of my larger Web projects. There’s so much freaking content to deal with – HTML Views, several derived CSS pages, page level CSS, script libraries, application wide scripts and page specific script files etc. etc. Thankfully I use Resharper and the Ctrl-T Go to Anything which autocompletes you to any file, type, member rapidly. Awesome except when I forget – or when I’m not quite sure of the name of what I’m looking for. Project navigation is still important. Sometimes while working on a project I seem to have 30 or more files open and trying to locate another new file to open in the solution often ends up being a mental exercise – “where did I put that thing?” It’s those little hesitations that tend to get in the way of workflow frequently. To make things worse most NuGet packages for client side frameworks and scripts, dump stuff into folders that I generally don’t use. I’ve never been a fan of the ‘Content’ folder in MVC which is just an empty layer that doesn’t serve much of a purpose. It’s usually the first thing I nuke in every MVC project. To me the project root is where the actual content for a site goes – is there really a need to add another folder to force another path into every resource you use? It’s ugly and also inefficient as it adds additional bytes to every resource link you embed into a page. Alternatives I’ve been playing around with different folder layouts recently and found that moving my cheese around has actually made project navigation much easier. In this post I show a couple of things I’ve found useful and maybe you find some of these useful as well or at least get some ideas what can be changed to provide better project flow. The first thing I’ve been doing is add a root Code folder and putting all server code into that. I’m a big fan of treating the Web project root folder as my Web root folder so all content comes from the root without unneeded nesting like the Content folder. By moving all server code out of the root tree (except for Code) the root tree becomes a lot cleaner immediately as you remove Controllers, App_Start, Models etc. and move them underneath Code. Yes this adds another folder level for server code, but it leaves only code related things in one place that’s easier to jump back and forth in. Additionally I find myself doing a lot less with server side code these days, more with client side code so I want the server code separated from that. The root folder itself then serves as the root content folder. Specifically I have the Views folder below it, as well as the Css and Scripts folders which serve to hold only common libraries and global CSS and Scripts code. These days of building SPA style application, I also tend to have an App folder there where I keep my application specific JavaScript files, as well as HTML View templates for client SPA apps like Angular. Here’s an example of what this looks like in a relatively small project: The goal is to keep things that are related together, so I don’t end up jumping around so much in the solution to get to specific project items. The Code folder may irk some of you and hark back to the days of the App_Code folder in non Web-Application projects, but these days I find myself messing with a lot less server side code and much more with client side files – HTML, CSS and JavaScript. Generally I work on a single controller at a time – once that’s open it’s open that’s typically the only server code I work with regularily. Business logic lives in another project altogether, so other than the controller and maybe ViewModels there’s not a lot of code being accessed in the Code folder. So throwing that off the root and isolating seems like an easy win. Nesting Page specific content In a lot of my existing applications that are pure server side MVC application perhaps with some JavaScript associated with them , I tend to have page level javascript and css files. For these types of pages I actually prefer the local files stored in the same folder as the parent view. So typically I have a .css and .js files with the same name as the view in the same folder. This looks something like this: In order for this to work you have to also make a configuration change inside of the /Views/web.config file, as the Views folder is blocked with the BlockViewHandler that prohibits access to content from that folder. It’s easy to fix by changing the path from * to *.cshtml or *.vbhtml so that view retrieval is blocked:<system.webServer> <handlers> <remove name="BlockViewHandler"/> <add name="BlockViewHandler" path="*.cshtml" verb="*" preCondition="integratedMode" type="System.Web.HttpNotFoundHandler" /> </handlers> </system.webServer> With this in place, from inside of your Views you can then reference those same resources like this:<link href="~/Views/Admin/QuizPrognosisItems.css" rel="stylesheet" /> and<script src="~/Views/Admin/QuizPrognosisItems.js"></script> which works fine. JavaScript and CSS files in the Views folder deploy just like the .cshtml files do and can be referenced from this folder as well. Making this happen is not really as straightforward as it should be with just Visual Studio unfortunately, as there’s no easy way to get the file nesting from the VS IDE directly (you have to modify the .csproj file). However, Mads Kristensen has a nice Visual Studio Add-in that provides file nesting via a short cut menu option. Using this you can select each of the ‘child’ files and then nest them under a parent file. In the case above I select the .js and .css files and nest them underneath the .cshtml view. I was even toying with the idea of throwing the controller.cs files into the Views folder, but that’s maybe going a little too far :-) It would work however as Visual Studio doesn’t publish .cs files and the compiler doesn’t care where the files live. There are lots of options and if you think that would make life easier it’s another option to help group related things together. Are there any downside to this? Possibly – if you’re using automated minification/packaging tools like ASP.NET Bundling or Grunt/Gulp with Uglify, it becomes a little harder to group script and css files for minification as you may end up looking in multiple folders instead of a single folder. But – again that’s a one time configuration step that’s easily handled and much less intrusive then constantly having to search for files in your project. Client Side Folders The particular project shown above in the screen shots above is a traditional server side ASP.NET MVC application with most content rendered into server side Razor pages. There’s a fair amount of client side stuff happening on these pages as well – specifically several of these pages are self contained single page Angular applications that deal with 1 or maybe 2 separate views and the layout I’ve shown above really focuses on the server side aspect where there are Razor views with related script and css resources. For applications that are more client centric and have a lot more script and HTML template based content I tend to use the same layout for the server components, but the client side code can often be broken out differently. In SPA type applications I tend to follow the App folder approach where all the application pieces that make the SPA applications end up below the App folder. Here’s what that looks like for me – here this is an AngularJs project: In this case the App folder holds both the application specific js files, and the partial HTML views that get loaded into this single SPA page application. In this particular Angular SPA application that has controllers linked to particular partial views, I prefer to keep the script files that are associated with the views – Angular Js Controllers in this case – with the actual partials. Again I like the proximity of the view with the main code associated with the view, because 90% of the UI application code that gets written is handled between these two files. This approach works well, but only if controllers are fairly closely aligned with the partials. If you have many smaller sub-controllers or lots of directives where the alignment between views and code is more segmented this approach starts falling apart and you’ll probably be better off with separate folders in js folder. Following Angular conventions you’d have controllers/directives/services etc. folders. Please note that I’m not saying any of these ways are right or wrong – this is just what has worked for me and why! Skipping Project Navigation altogether with Resharper I’ve talked a bit about project navigation in the project tree, which is a common way to navigate and which we all use at least some of the time, but if you use a tool like Resharper – which has Ctrl-T to jump to anything, you can quickly navigate with a shortcut key and autocomplete search. Here’s what Resharper’s jump to anything looks like: Resharper’s Goto Anything box lets you type and quick search over files, classes and members of the entire solution which is a very fast and powerful way to find what you’re looking for in your project, by passing the solution explorer altogether. As long as you remember to use (which I sometimes don’t) and you know what you’re looking for it’s by far the quickest way to find things in a project. It’s a shame that this sort of a simple search interface isn’t part of the native Visual Studio IDE. Work how you like to work Ultimately it all comes down to workflow and how you like to work, and what makes *you* more productive. Following pre-defined patterns is great for consistency, as long as they don’t get in the way you work. A lot of the default folder structures in Visual Studio for ASP.NET MVC were defined when things were done differently. These days we’re dealing with a lot more diverse project content than when ASP.NET MVC was originally introduced and project organization definitely is something that can get in the way if it doesn’t fit your workflow. So take a look and see what works well and what might benefit from organizing files differently. As so many things with ASP.NET, as things evolve and tend to get more complex I’ve found that I end up fighting some of the conventions. The good news is that you don’t have to follow the conventions and you have the freedom to do just about anything that works for you. Even though what I’ve shown here diverges from conventions, I don’t think anybody would stumble over these relatively minor changes and not immediately figure out where things live, even in larger projects. But nevertheless think long and hard before breaking those conventions – if there isn’t a good reason to break them or the changes don’t provide improved workflow then it’s not worth it. Break the rules, but only if there’s a quantifiable benefit. You may not agree with how I’ve chosen to divert from the standard project structures in this article, but maybe it gives you some ideas of how you can mix things up to make your existing project flow a little nicer and make it easier to navigate for your environment. © Rick Strahl, West Wind Technologies, 2005-2014Posted in ASP.NET MVC Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article
September 2012 Release of the Ajax Control Toolkit

- by Stephen.Walther

I’m excited to announce the September 2012 release of the Ajax Control Toolkit! This is the first release of the Ajax Control Toolkit which supports the .NET 4.5 framework. We also continue to support ASP.NET 3.5 and ASP.NET 4.0. With this release, we’ve made several important bug fixes. The Superexpert team focused on fixing the highest voted issues associated with the CascadingDropDown control. I’ve created a list of these bug fixes later in this blog post. You can download the latest release of the Ajax Control Toolkit by visiting the following page at CodePlex: http://AjaxControlToolkit.CodePlex.com Alternatively, you can install the latest version of the Ajax Control Toolkit using NuGet by firing off the following command from the Package Manager Console: Install-Package AjaxControlToolkit Using the Ajax Control Toolkit with ASP.NET 4.5 Let me walk through the steps for using the Ajax Control Toolkit with ASP.NET 4.5. First, I’ll create a new ASP.NET 4.5 website with Visual Studio 2012. I’ll create the new website with the ASP.NET Web Forms Application template: When you create a new ASP.NET 4.5 site with the ASP.NET Web Forms Application template, you get a starter website. If you run the site, then you get a page with default content: Let me show you how you can add the Ajax Control Toolkit Calendar control to the homepage of this starter site. The first step is to use NuGet to install the Ajax Control Toolkit. Right-click the References folder in the Solution Explorer window and select the menu option Manage NuGet Packages. In the Manage NuGet Packages dialog, use the search box to search for the Ajax Control Toolkit (enter “AjaxControlToolkit”). After you find it, click the Install button to add the Ajax Control Toolkit to your project. That’s all you have to do to install the Ajax Control Toolkit! Now we are ready to start using the Ajax Control Toolkit controls. Open the default.aspx page so we can modify the contents of the page. Erase everything contained in the Content control with the ID of BodyContent. After erasing the content, declare the following two controls: <asp:TextBox ID="vacationDate" runat="server" /> <ajaxToolkit:CalendarExtender TargetControlID="vacationDate" runat="server" /> The first control is a standard ASP.NET TextBox control and the second control is an Ajax Control Toolkit Calendar control. You should get intellisense as you type out the Ajax Control Toolkit Calendar control. If you don’t, then close and re-open the Default.aspx page. Now, let’s run our app. Hit the F5 button or select Debug, Start Debugging from the Visual Studio menu. You will get the error message “MsAjaxBundle is not a valid script name”. Don’t despair! We need to update the Master Page so it uses the ToolkitScriptManager instead of the default ScriptManager. Open the Site.Master file and find where the ScriptManager is declared. The ScriptManager should look like this: <asp:ScriptManager runat="server"> <Scripts> <%--Framework Scripts--%> <asp:ScriptReference Name="MsAjaxBundle" /> <asp:ScriptReference Name="jquery" /> <asp:ScriptReference Name="jquery.ui.combined" /> <asp:ScriptReference Name="WebForms.js" Assembly="System.Web" Path="~/Scripts/WebForms/WebForms.js" /> <asp:ScriptReference Name="WebUIValidation.js" Assembly="System.Web" Path="~/Scripts/WebForms/WebUIValidation.js" /> <asp:ScriptReference Name="MenuStandards.js" Assembly="System.Web" Path="~/Scripts/WebForms/MenuStandards.js" /> <asp:ScriptReference Name="GridView.js" Assembly="System.Web" Path="~/Scripts/WebForms/GridView.js" /> <asp:ScriptReference Name="DetailsView.js" Assembly="System.Web" Path="~/Scripts/WebForms/DetailsView.js" /> <asp:ScriptReference Name="TreeView.js" Assembly="System.Web" Path="~/Scripts/WebForms/TreeView.js" /> <asp:ScriptReference Name="WebParts.js" Assembly="System.Web" Path="~/Scripts/WebForms/WebParts.js" /> <asp:ScriptReference Name="Focus.js" Assembly="System.Web" Path="~/Scripts/WebForms/Focus.js" /> <asp:ScriptReference Name="WebFormsBundle" /> <%--Site Scripts--%> </Scripts> </asp:ScriptManager> We need to make three changes to the ScriptManager: 1) We need to replace the asp:ScriptManager with the ajaxToolkit:ToolkitScriptManager 2) We need to remove the MsAjaxBundle bundle from the ScriptReferences 3) We need to remove the Assembly=”System.Web” attributes from the ScriptReferences After you make these three changes, the ToolkitScriptManager should looks like this: <ajaxToolkit:ToolkitScriptManager runat="server"> <Scripts> <%--Framework Scripts--%> <asp:ScriptReference Name="jquery" /> <asp:ScriptReference Name="jquery.ui.combined" /> <asp:ScriptReference Name="WebForms.js" Path="~/Scripts/WebForms/WebForms.js" /> <asp:ScriptReference Name="WebUIValidation.js" Path="~/Scripts/WebForms/WebUIValidation.js" /> <asp:ScriptReference Name="MenuStandards.js" Path="~/Scripts/WebForms/MenuStandards.js" /> <asp:ScriptReference Name="GridView.js" Path="~/Scripts/WebForms/GridView.js" /> <asp:ScriptReference Name="DetailsView.js" Path="~/Scripts/WebForms/DetailsView.js" /> <asp:ScriptReference Name="TreeView.js" Path="~/Scripts/WebForms/TreeView.js" /> <asp:ScriptReference Name="WebParts.js" Path="~/Scripts/WebForms/WebParts.js" /> <asp:ScriptReference Name="Focus.js" Path="~/Scripts/WebForms/Focus.js" /> <asp:ScriptReference Name="WebFormsBundle" /> <%--Site Scripts--%> </Scripts> </ajaxToolkit:ToolkitScriptManager> After we make these changes, the app should run successfully. You’ll get a page which contains a text field. When you click inside the text field, a popup calendar is displayed. Ajax Control Toolkit and jQuery You might have noticed that the ScriptManager includes a reference to jQuery by default. We did not remove that reference when we converted the ScriptManager to a ToolkitScriptManager. You can use the Ajax Control Toolkit and jQuery side-by-side. Here’s how you can modify the Default.aspx page so that it contains two popup calendars. The first popup calendar is created with the Ajax Control Toolkit and the second popup calendar is created with jQuery: <asp:TextBox ID="vacationDate" runat="server" /> <ajaxToolkit:CalendarExtender TargetControlID="vacationDate" runat="server" /> <input id="birthDate" /> <script> $("#birthDate").datepicker(); </script> Before you can start using jQuery UI plugins, you need to complete one more step. You need to add the jQuery UI themes bundle to the HEAD of the Site.Master page like this: <head runat="server"> <meta charset="utf-8" /> <title><%: Page.Title %> - My ASP.NET Application</title> <asp:PlaceHolder runat="server"> <%: Scripts.Render("~/bundles/modernizr") %> </asp:PlaceHolder> <webopt:BundleReference runat="server" Path="~/Content/css" /> <webopt:BundleReference runat="server" Path="~/Content/themes/base/css" /> <link href="~/favicon.ico" rel="shortcut icon" type="image/x-icon" /> <meta name="viewport" content="width=device-width" /> <asp:ContentPlaceHolder runat="server" ID="HeadContent" /> </head> The markup above includes a reference to the jQuery UI themes bundle: <webopt:BundleReference runat="server" Path="~/Content/themes/base/css" /> Now that we have made these changes, we can use the Ajax Control Toolkit and jQuery at the same time. When you run your app, you get two popup calendars. When you click in the first text field, the Ajax Control Toolkit calendar appears. When you click in the second text field, the jQuery UI popup calendar appears: Bug Fixes in this Release We made several important bug fixes with this release of the Ajax Control Toolkit and integrated several Pull Requests contributed by the community. Our primary focus during this sprint was fixing issues with the CascadingDropDown control. We fixed the following issues associated with the CascadingDropDown: · 9490 – Don’t disable dropdowns in CascadingDropDown · 14223 – CascadingDropDown Reset or Setting SelectedValue from WebMethod · 12189 – CascadingDropDown not obeying disabled state of DropDownList · 22942 – CascadingDropDown infinite loop (with solution) · 8671 – CascadingDropdown options is null or undefined · 14407 – CascadingDropDown: populated client event happens too often · 17148 – CascadingDropDown – Add “UseHttpGet” property · 10221 – No NotNull check in CascadingDropDown · 12228 – Provide property for case-insensitive DefaultValue lookup in CascadingDropdown We also fixed the following two issues which are not directly related to the CascadingDropDown control: · 27108 – CalendarExtender: Bug when selecting December shifts to January. · 27041 – Input controls with HTML5 types do not post back in Firefox, Chrome, Safari Finally, we integrated several Pull Requests submitted by the community (Thank you community!): · Added French localized resources for the AjaxFileUpload · Resolved an issue which prevented the AjaxFileUpload control from working with pages that require query string variables. · Extended the AjaxFileUploadEventArgs class to include the current file index in the queue and the total number of files in the queue. · Fixed an issue with TabContainer and TabPanel which caused the OnActiveTabChanged event to fire too often. Summary I’m happy to see the Ajax Control Toolkit move forward into the brave new world of ASP.NET 4.5! In this latest release, we focused on ensuring that the Ajax Control Toolkit works smoothly with ASP.NET 4.5 applications. We also fixed the highest voted bugs associated with the CascadingDropDown control and integrated several Pull Request submitted by the community. Once again, I want to thank the Superexpert team for their hard work on this release!

Read the article
CodePlex Daily Summary for Friday, May 07, 2010

CodePlex Daily Summary for Friday, May 07, 2010New ProjectsBibleBrowser: BibleBrowserBibleMaps: BibleMapsChristianLibrary: ChristianLibraryCLB Podcast Module: DotNetNuke Module used to allow DNN to host one or more podcasts within a portal.Coletivo InVitro: Nova versão do Site do ColetivoCustomer Care Accelerator for Microsoft Dynamics CRM: Customer Care Accelerator for Microsoft Dynamics CRM.EasyTFS: A very lightweight, quick, web-based search application for Team Foundation Server. EasyTfs searches as you type, providing real-time search resul...FSCommunity: abcGeocache Downloader: GeocacheDownloader helps you download geocache information in an organised way, making easier to copy the information to your device. The applicati...Grabouille: Grabouille aims to be an incubation project for Microsoft best patterns & practices and also a container for last .Net technologies. The goal is, i...Klaverjas: Test application for testing different new technologies in .NET (WCF, DataServices, C# stuff, Entity...etc.)Livecity: Social network. Alpha 0.1MarxSupples: testMOSS 2007 - Excel Services: This helps you understand MOSS 2007 - Excel Services and how to use the same in .NETmy site: a personal web siteNazTek.Extension.Clr35: Contains a set of CLR 3.5 extensions and utility APInetDumbster: netDumbster is a .Net Fake SMTP Server clone of the popular Dumbster (http://quintanasoft.com/dumbster/) netDumbster is based on the API of nDumbs...Object-Oriented Optimization Toolbox (OOOT): A library (.dll) of various linear, nonlinear, and stochastic numerical optimization techniques. While some of these are older than 50 years, they ...OMap - Object to Object Mapper: OMap is a simple object to object mapper. It could be used for scenarios like mapping your data from domain objects into data transfer objects.PDF Renderer for BlackBerry.: Render and view PDF files on BlackBerry using a modified version of Sun's PDF Renderer.Pomodoro Tool: Pomodoro Tool is a timer for http://www.pomodorotechnique.com/ . It's a timer and task tracker with a text task editing interface.ReadingPlan: ReadingPlanRil#: .net library to use the public Readitlater.com public APISCSM Incident SLA Management: This project provides an extension to System Center Service Manager to provide more granular control over incident service level agreement (SLA) ma...SEAH - Sistema Especialista de Agravante de Hipertensão: O SEAH tem como propósito alertar o indivíduo em relação ao seu agravante de hipertensão arterial e a órgãos competentes, entidades de ensino, pesq...StudyGuide: StudyGuideTest Project (ignore): This is used to demonstrate CodePlex at meetings. Please ignore this project.YCC: YCC is an open source c compiler which compatible with ANSI standard.The project is currently an origin start.We will work it for finally useable a...New ReleasesAlbum photo de club - Club's Photos Album: App - version 0.5: Modifications : - Ajout des favoris - Ajout de l'update automatique /*/ - Add favorites - Add automatic updateBoxee Launcher: Boxee Launcher 1.0.1.5: Boxee Launcher finds the BOXEE executable using a registry key that BOXEE creates. The new version of BOXEE changed the location. Boxee Launcher ha...CBM-Command: 2010-05-06: Release Notes - 2010-05-06New Features Creating Directories Deleting Files and Directories Renaming Files and Directories Changes 40 columns i...Customer Care Accelerator for Microsoft Dynamics CRM: Customer Care Accelerator for Dynamics CRM R1: The Customer Care Accelerator (CCA) for Microsoft Dynamics CRM focuses on delivering contact center enabling functionality, such as the ability to ...D-AMPS: D-AMPS 0.9.2: Add .bat files for command-line running Bug fixed (core engine) Section 6, 8, 9 modifications Sources (Fortran) for core engineDynamicJson: Release 1.1.0.0: Add - foreach support Add - Dynamic Shortcut of IsDefined,Delete,Deserialize Fix - Deserialize Delete - LengthEasyTFS: EasyTfs 1.0 Beta 1: A very lightweight, quick, web-based search application for Team Foundation Server. EasyTfs searches as you type, providing real-time search resul...Event Scavenger: Add installer for Admin tool: Added installer for Admin tool. Removed exe's for admin and viewer from zip file - were replaced by the msi installers.Expression Blend Samples: PathListBoxUtils for Expression Blend 4 RC: Initial release of the PathListBoxUtils samples.HackingSilverlight Code Browser: HackingSilverlight Code Browser: Out with the old and in with the new... the HackingSilverlight Code Browser is a reference tool for code snippets so that I can not have to remembe...Hammock for REST: Hammock v1.0.3: v1.0.3 ChangesFixes for OAuth escaping and API usage Added FollowRedirects feature to RestClient/RestRequest v1.0.2 Changes.NET 4.0 and Client P...ImmlPad: ImmlPad Beta 1.1.1: Changes in this release: Added more intelligent right-click menu's to allow opening an IMML document with a specific Player version Fixed issue w...LinkedIn® for Windows Mobile: LinkedIn for Windows Mobile v0.8: Improved error message dumping + moved OAuth parameters from www.* to api.* In case of unexpected errors, check "Application Data\LinkedIn for Wind...Live-Exchange Calendar Sync: Installer: Alpha release of Live-Exchange Calendar SyncMAPILab Explorer for SharePoint: MAPILab Explorer for SharePoint ver 2.1.0: 1) Get settings form old versions 2) Rules added to display enumerable object items. 3) Bug fixed with remove persisted object How to install:Do...MapWindow6: MapWindow 6.0 msi May 6, 2010: This release enables output .prj files to also show the ESRI names for the PRJCS, GEOCS, and the DATUM. It also fixes a bug that was preventing th...MOSS 2007 - Excel Services: Calculator using Excel Services: Simple calculator using Excel ServicesMvcMaps - Unified Bing/Google Mapping API for ASP.NET MVC: MvcMaps Preview 1 for ASP.NET 4.0 and VS'2010: There was a change in ASP.NET 4.0 that broke the release, so a small modification needed to be made to the reflection code. This release fixes that...NazTek.Extension.Clr35: NazTek.Extension.Clr35 Binary Cab: Binary cab fileNazTek.Extension.Clr35: NazTek.Extension.Clr35 Source Cab: Source codePDF Renderer for BlackBerry.: PDF Renderer 0.1 for BlackBerry: This library requires a BlackBerry Signing Key in order to compile for use on a BlackBerry device. Signing keys can be obtained at BlackBerry Code ...Pomodoro Tool: PomodoroTool Clickonce installer: PomodoroTool Clickonce installerPOS for .Net Handheld Products Service Object: POS for .Net Handheld Products Service Object 1002: New version (1.0.0.2) which should support 64 bit platforms (see ReadMe.txt included with source for details). Source code only.QuestTracker: QuestTracker 0.4: What's New in QuestTracker 0.4 - - You can now drag and drop the quests on the left pane to rearrange or move quests from one group to another. - D...RDA Collaboration Team Projects: Property Bag Cmdlet: This cmdlet allows to retrieve, insert and update property bag values at farm, web app, site and web scope. The same operations can be in code usi...Ril#: Rilsharp 1.0: The first version of the Ril# (Readitlater sharp) library.Scrum Sprint Monitor: v1.0.0.47911 (.NET 4-TFS 2010): What is new in this release? Migrated to .NET Framework 4 RTM; Compiled against TFS 2010 RTM Client DLLs; Smoother animations with easing funct...SCSM Incident SLA Management: SCSM Incident SLA Management Version 0.1: This is the first release of the SCSM SLA Management solution. It is an 'alpha' release and has only been tested by the developers on the project....StackOverflow Desktop Client in C# and WPF: StackOverflow Client 0.4: Shows a popup that displays all the new questions and allows you to navigate between them. Fixed a bug that showed incorrect views and answers in t...Transcriber: Transcriber V0.1: Pre-release, usable but very rough.VCC: Latest build, v2.1.30506.0: Automatic drop of latest buildVisual Studio CSLA Extension for ADO.NET Entity Framework: CslaExtension Beta1: Requirements Visual Studio 2010 CSLA 4.0. Beta 1 Installation Download VSIX file and double click to install. Open Visual Studio -> Tools -> Exte...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight Toolkitpatterns & practices – Enterprise LibraryWindows Presentation Foundation (WPF)ASP.NETDotNetNuke® Community EditionMicrosoft SQL Server Community & SamplesMost Active Projectspatterns & practices – Enterprise LibraryAJAX Control FrameworkIonics Isapi Rewrite FilterRawrpatterns & practices: Azure Security GuidanceCaliburn: An Application Framework for WPF and SilverlightBlogEngine.NETTweetSharpNB_Store - Free DotNetNuke Ecommerce Catalog ModuleTinyProject

Read the article
CodePlex Daily Summary for Tuesday, April 03, 2012

CodePlex Daily Summary for Tuesday, April 03, 2012Popular ReleasesWiX Toolset: WiX v3.6 RC0: WiX v3.6 RC0 (3.6.2803.0) provides support for VS11 and a more stable Burn engine. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/4/3/WiX-v3.6-Release-Candidate-Zero-availableSageFrame: SageFrame 2.0: Sageframe is an open source ASP.NET web development framework developed using ASP.NET 3.5 with service pack 1 (sp1) technology. It is designed specifically to help developers build dynamic website by providing core functionality common to most web applications.Lightbox Gallery Module for DotNetNuke: 01.11.00: This version of the Lightbox Gallery Module adds the following features/bug fixes: Feature: Read image EXIF information Bug Fix: URL parsing bug for any folder provider Minimum System Requirements Please ensure that your environment meets or exceeds the following system requirements: DotNetNuke® Version 06.00.00 or higher SQL Server 2005 or later .Net Framework 3.5 SP1 or laterClosedXML - The easy way to OpenXML: ClosedXML 0.65.0: Aside from many bug fixes we now have Conditional Formatting The conditional formatting was sponsored by http://www.bewing.nl (big thanks)callisto: callisto 2.0.24: Implemented ares encryption protocol for supported clients. Also changed script loading method to read direct from source files.sb0t: sb0t 4.61: Added packet encryption protocol for supported clients.iTuner - The iTunes Companion: iTuner 1.5.4475: Fix to parse empty playlists in iTunes LibraryExtAspNet: ExtAspNet v3.1.1: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-04-02 v3.1.1 +????????，?????????????，????????????（...Document.Editor: 2012.2: Whats New for Document.Editor 2012.2: New Save Copy support New Page Setup support Minor Bug Fix's, improvements and speed upsVidCoder: 1.3.2: Added option for the minimum title length to scan. Added support to enable or disable LibDVDNav. Added option to prompt to delete source files after clearing successful completed items. Added option to disable remembering recent files and folders. Tweaked number box to only select all on a quick click.MJP's DirectX 11 Samples: Light Indexed Deferred Rendering: Implements light indexed deferred using per-tile light lists calculated in a compute shader, as well as a traditional deferred renderer that uses a compute shader for per-tile light culling and per-pixel shading.Pcap.Net: Pcap.Net 0.9.0 (66492): Pcap.Net - March 2012 Release Pcap.Net is a .NET wrapper for WinPcap written in C++/CLI and C#. It Features almost all WinPcap features and includes a packet interpretation framework. Version 0.9.0 (Change Set 66492)March 31, 2012 release of the Pcap.Net framework. Follow Pcap.Net on Google+Follow Pcap.Net on Google+ Files Pcap.Net.DevelopersPack.0.9.0.66492.zip - Includes all the tutorial example projects source files, the binaries in a 3rdParty directory and the documentation. It include...Extended WPF Toolkit: Extended WPF Toolkit - 1.6.0: Want an easier way to install the Extended WPF Toolkit?The Extended WPF Toolkit is available on Nuget. What's in the 1.6.0 Release?BusyIndicator ButtonSpinner Calculator CalculatorUpDown CheckListBox - Breaking Changes CheckComboBox - New Control ChildWindow CollectionEditor CollectionEditorDialog ColorCanvas ColorPicker DateTimePicker DateTimeUpDown DecimalUpDown DoubleUpDown DropDownButton IntegerUpDown Magnifier MaskedTextBox MessageBox MultiLineTex...Media Companion: MC 3.434b Release: General This release should be the last beta for 3.4xx. If there are no major problems, by the end of the week it will upgraded to 3.500 Stable! The latest mc_com.exe should be included too! TV Bug fix - crash when using XBMC scraper for TV episodes. Bug fix - episode count update when adding new episodes. Bug fix - crash when actors name was missing. Enhanced TV scrape progress text. Enhancements made to missing episodes display. Movies Bug fix - hide "Play Trailer" when multisaev...Better Explorer: Better Explorer 2.0.0.831 Alpha: - A new release with: - many bugfixes - changed icon - added code for more failsafe registry usage on x64 systems - not needed regfix anymore - added ribbon shortcut keys - Other fixes Note: If you have problems opening system libraries, a suggestion was given to copy all of these libraries and then delete the originals. Thanks to Gaugamela for that! (see discussion here: 349015 ) Note2: I was upload again the setup due to missing file!MonoGame - Write Once, Play Everywhere: MonoGame 2.5: The MonoGame team are pleased to announce that MonoGame v2.5 has been released. This release contains important bug fixes, implements optimisations and adds key features. MonoGame now has the capability to use OpenGLES 2.0 on Android and iOS devices, meaning it now supports custom shaders across mobile and desktop platforms. Also included in this release are native orientation animations on iOS devices and better Orientation support for Android. There have also been a lot of bug fixes since t...Circuit Diagram: Circuit Diagram 2.0 Alpha 3: New in this release: Added components: Microcontroller Demultiplexer Flip & rotate components Open XML files from older versions of Circuit Diagram Text formatting for components New CDDX syntax Other fixesUmbraco CMS: Umbraco 5.1 CMS (Beta): Beta build for testing - please report issues at issues.umbraco.org (Latest uploaded: 5.1.0.123) What's new in 5.1? The full list of changes is on our http://progress.umbraco.org task tracking page. It shows items complete for 5.1, and 5.1 includes items for 5.0.1 and 5.0.2 listed there too. Here's two headline acts: Members5.1 adds support for backoffice editing of Members. We support the pairing up of our content type system in Hive with regular ASP.NET Membership providers (we ship a def...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.2.11: One Click Install from NuGet Changes to Version 2.1.2.11Code Changes 1. The project is now licenced under the Mozilla Public Licence 2. 2. User interface control and associated data access layer classes have been added to aid developers integrating 51Degrees.mobi into wider projects such as content management systems or web hosting management solutions. Use the following in a web form or user control to access these new UI components. <%@ Register Assembly="FiftyOne.Foundation" Namespace="...ScintillaNET: ScintillaNET 2.5: A slew of bug-fixes with a few new features sprinkled in. This release also upgrades the SciLexer and SciLexer64 DLLs to version 3.0.4. The official stuff: Issue # Title 32402 32402 27137 27137 31548 31548 30179 30179 24932 24932 29701 29701 31238 31238 26875 26875 30052 30052 New Projects3DTweet: 3Dtweet is an effort to make tweets appear in a aesthetic manner to the users of windows phone.Its developed using VS2010 expresss.Alay Plugin for Windows Live Writer: a project for creating an alay languageAuthor-it Copy Folder Plug-in: The Copy Folder Plug-in is an Author-it plug-in that allows the user to create a duplicate of a folder and its contents, including subfolders and objects.Author-it Dependencies Plug-in: The Word Count Plug-in is an Author-it plug-in that allows the user to drill down into object relationships to find objects that selected Author-it objects depend on.Author-it Word Count Plug-in: The Word Count Plug-in is an Author-it plug-in that allows the user to get word counts for selected topics.Azure Configuration File Comparer: Compares two Azure configuration files and highlights the differencesBootstrap Footer Sticker: Bootstrap extensions for footer to stick at the bottomBulk Approval Webpart: This webpart can be added to any list, or document library that requires approval. When the button is clicked it will approve all items. It will also kick start any workflows attached to the list / library that are set to start when an item has been changed. CodeTimer: Code Execute TimeCRM 2011 - WinForm based User Settings Console: This is Windows Form based Utility to do bulk management of User Settings in CRM 2011Emergency System: An Imagine Cup projectFalafel Solution Rename Script: The Falafel Software Solution Rename PowerShell Script makes it easy to reuse an existing solution/project by performing a global rename. If you have a solution named ExampleSolution and want to reuse it as WidgetSolution, this script will rename everything for you.Gadgeteer Bluetooth Module: BETA Drivers for the .NET Gadgeteer Bluetooth modulesGreg's Channel 9 Utilities and Helpers: Utilities and helpers for Microsoft's Channel 9 (C9) site. These are utilities I've created to make my C9 work faster and easierHB's First Time: My first project hereHOMMFrame: Studying project about frames.ICNInformaticaCenter: * ICNInformaticaCenter *Insert a Favorite (Bookmark) plugin for Windows Live Writer: This Windows Live Writer plugin allows you to select a Favorite (Bookmark) and insert it into your blog entry.Kinect your Metro Style App: The main idea is to tell Metro Style App communicate with external environment via Kinect Sensor.Memo: Memo Intellegence SystemMGR.CommandLineParser: MGR.CommandLineParser is a multi-command line parser. It uses System.ComponentModel.DataAnnotations to declare and validate the commands.MusicStoreMVC3: ?????MVC3??????????，????????（???????）??? 1.EF4.1 2.MVC3 3.MvcPager 4.Linq ?????? NN Crew Calculator: Calculator project to help learn C#Reporte Ciudadano: Aplicación para que los ciudadanos reporten los problemas al ayuntamiento.Sejrssedler: This is a school project made, by four student in Aarhus, Denmark. During the Datamatiker study(2nd year).smartcamera: smart cameraSpecEx: Speculative ExecutionStructure Copier: This small program is supposed to copy tree structure of directory.TFS2010 Service Provider: Web Service (asmx) is a provider of Team Foundation Server 2010 object model. Was developed to enable the implementation of client application for Android and etc. platforms, which receives data from the server via Web services.totalem: totalem - free file manager for WindowsWebSharperWithTypeProviders: WebSharper project with Visual Studio 2011 Beta, .Net 4.5 and F# 3.0 with TypeProviders

Read the article

Search Results

Search found 1778 results on 72 pages for 'shortcut'.

Page 68/72 | < Previous Page | 64 65 66 67 68 69 70 71 72 | Next Page >

- by SAMIR BHOGAYTA

- by Pinal Dave

- by Rob Farley

- by Rob Farley

- by MLM

- by Pinal Dave

- by Alois Kraus

- by Renso

- by cyberycon

- by rpm1200

- by ScottGu

- by Anthony

- by rpm1200

- by harryg

- by Joel Coel

- by Mladen Prajdic

- by Daniel Moth

- by Daniel Moth

- by ScottGu

- by ScottGu

- by Rick Strahl

- by Stephen.Walther

< Previous Page | 64 65 66 67 68 69 70 71 72 | Next Page >