Search Results

Search found 10045 results on 402 pages for 'virtual jasper'.

Page 68/402 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• Virtual Fileserver

  - by Sergei

  Hi, We are planning to move our production servers to the datacenter and virtualize remaining servers in the process.Datacenter will have HP blades with vSphere on top.Currentliy we are using Celerra NS20 as fileserver.Since datacenter is using HP kit and EVA 4400 as SAN, we cannot have Celerra there, as EMC supoprt for Celerra does not work for non EMC array. I have searched for possible options and one of them was to have HP NAS blade X3800sb instead of Celerra.However this seems like overkill for me.We are only using Celerra for about 100 users and 50 servers and I think having X3800sb could be waste of resources. The other option would be to have a virtual fileserver as a part of vmware environment in datacenter.We only need CIFS to be provided.The only option I can think of is Windows Storage server.We had a bad expirience with Windows servers used as fileservers ( memory leaks one thing) in the past and this was one of the reasons we moved to Celerra. What are the other options?We need something as reliable as Celerra with as many options as possible.For example , Celerra has per folder quotas, deduplication, dynamic volume allocation, automatic failover, VTLU, replication. Also we would need to replicate NAS data to the failover site.We could use block level replication , SAN-to-SAN, but this would mean wasted bandwidth, as we need only subset of folders to be replicated.We used CA XSoft for windows servers in the past and Celerra has option for Celerra replication. Thank you very much in advance, Please ask me if I missed any details!

  Read the article

• Subdomains not working with virtual hosts on apache2 ubuntu

  - by cy834sh4rk

  I'm trying to set up a subdomain on my ec2 account but can't figure out what's going on. I've looked for a few hours and haven't been able to find an answer :-/ I'm trying to set up a subdomain using virtual hosts but no matter what I try the browser can't find the subdomain :-( I have the following vhosts files set up: apache2/sites-available/mysite (this site currently works) <VirtualHost *:80 ServerName mysite.com ServerAdmin webmaster@localhost DocumentRoot /home/sites/mysite <Directory /home/sites/mysite Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory ErrorLog ${APACHE_LOG_DIR}/mysite-error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/mysite-access.log combined </VirtualHost apache2/sites-available/red (this is the subdomain I'm trying to set up) <VirtualHost *:80 ServerName red.mysite.com ServerAdmin webmaster@localhost DocumentRoot /var/www/red <Directory /var/www/red Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory ErrorLog ${APACHE_LOG_DIR}/red-error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/red-access.log combined </VirtualHost Apache mod_rewrite is enabled. I've enabled both sites using a2ensite and I make sure I restart apache every time I make a change. /etc/hosts 127.0.0.1 localhost 127.0.0.1 mysite.com 127.0.0.1 red.mysite.com Any help would be appreciated. Thanks!

  Read the article

• Dedicated virtual setup is slow with WordPress

  - by kovshenin

  Hey. I'm running a Fedora linux server on the Amazon EC2 platform. I'm pretty sure there's something wrong with my configuration as it seems to be very slow. SSH sometimes takes over 30 seconds to connect, a WordPress generated web page could take 5 seconds to load, and it could take 20 seconds to load, which is pretty awkward. MySQL queries are all executed in less than a second, so I don't think that's the case. I'm not really sure where the issue lies, but a simple page written in PHP loads instantly. A fresh WordPress installation starts lagging. Same works perfect on grid hosting at MediaTemple for instance, so I'm pretty sure I missed something. If you could please direct me to the right tools and articles which would help me out. Thanks so much! Fedora Core 8, php 5.2.6, MySQL 5.0.45, OpenSSH 4.7p1, OpenSSL 0.9.8b. PHP is configured as a module to Apache 2.2.9, all websites based on virtual hosts. I have some on-going php scripts running from time to time in the background via cron. Thanks.

  Read the article

• SSH session becomes unresponsive when logged into Ubuntu Server virtual machine using VirtualBox

  - by nickbart

  Hi everyone, I'm really at my wits end here, so I'm hoping someone here can help me. I have a virtual machine running Ubuntu Server 9.10. It's just a small development environment so I can keep my code separate from the test and production environments. I am running it through VirtualBox 3.1.6 on a laptop running Ubuntu Desktop 9.10. I have it set up with a bridged network connection and it is bridged to my laptop's wireless adapter. We have no wired connections in this office. I boot up the VM and everything is fine. I can SSH into it using gnome-terminal and for a while everything is Kosher. Then seemingly randomly, the SSH terminal session with hang. No error message, nothing; it just becomes unresponsive. If I go to the VirtualBox terminal I find the VM itself is perfectly fine. It can ping and I can SSH out with it. If I restart the networking on the VM the SSH session in my gnome-terminal will most of the time become responsive again. Here's an interesting point, the SSH session will sometimes die right in the middle of me typing something (this points to it not being an idle session issue) and if I go to the VirtualBox terminal and restart the networking and then return to my gnome-terminal SSH session I find that it will come back to life and what I typed when the session hung originally will magically type itself in to the buffer. So, my input is getting stored somewhere and just can't make its way to the VM until the networking on the VM is restarted. I've tried different versions of VirtualBox and used vmdk images and vdi images and nothing seems to work. I can't tell if the problem is with my laptop, VirtualBox, or the Ubuntu Server VDI. Is there anyway to debug this issue? Or has anyone out there seen anything similar? Your help is much appreciated. Nick

  Read the article

• Apache Name-based Virtual Hosts - configuring httpd.conf file

  - by Dave

  Hi there. I am running a web app on Tomcat at the following location on my server. /var/tomcat/webapps/SoccerApp I am looking to update the Tomcat httpd.conf file with the following virtual host... <VirtualHost *:80> DocumentRoot /var/tomcat/webapps/SoccerApp/MyTeam ServerName www.mysoccerapp.com </VirtualHost> This gives me a 404 error as the directory MyTeam does not exist. However my application behaves in a way that it uses this URL directory as the name of the soccer team for which to display data, so it will never be a physical folder on the server. None the less, I would like www.mysoccerapp.com to resolve to webapps/SoccerApp/MyTeam, even though the directory isnt there. does this make any sense? Any ideas on how to get this working. At the end of the day, i want to do the following... www.teamone.com -> runs /webapps/SoccerApp/TeamOne www.teamone.com -> runs /webapps/SoccerApp/TeamTwo ...where TeamOne and TeamTwo are not physical directories, but merely processed by my SoccerApp application as the current soccer team to display data for. Many many thanks! Dave.

  Read the article

• Setting up httpd-vhosts.conf for multiple virtual hosts

  - by Chris Sobolewski

  I have a simple test setup using xampp at home, and I am getting really weird behavior when I attempt to set up multiple virtual hosts on this box. Here is my vhosts file: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] ServerName foo DocumentRoot "D:\wamp\xampp\htdocs\foo" ErrorLog logs/foo-error_log CustomLog logs/foo-access_log common <Directory "D:\wamp\xampp\htdocs\foo"> Options Indexes FollowSymLinks Includes execCGI AllowOverride All Order Allow,Deny Allow From All </Directory> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName bar DocumentRoot "D:\wamp\xampp\htdocs\bar" ErrorLog logs/bar-error_log CustomLog logs/bar-access_log common <Directory "D:\wamp\xampp\htdocs\bar"> Options Indexes FollowSymLinks Includes execCGI AllowOverride All Order Allow,Deny Allow From All </Directory> </VirtualHost> When I attempt to run visit the first site, it works as expected. When I attempt to run the second site, I get a weird hybrid mishmash of both sites. It's the weirdest thing.

  Read the article

• CentOS 6.3 Virtual under OpenVZ cannot ping, host lookups, outbound connections while postfix running

  - by Paul Cravey

  My best theory is that some kernel limit is being hit preventing outbound connections. We have tried basically everything from tcpdumps to provisioning an entirely new virtual server (we do not have this problem on any other virtuals), however the problem somehow carried over, even with new postfix build (working). Emails work, and outbound connections work, so long as postfix does not have too much going on. /proc/user_beancounters shows no limits being hit (show below). Nevertheless, pings fail even to IP addresses. TCP stack appears healthy. Load is low. No iowait. Flushed iptables already. Has anyone experienced anything like this? uid resource held maxheld barrier limit failcnt 3: kmemsize 166216365 170262528 9223372036854775807 9223372036854775807 0 lockedpages 0 0 9223372036854775807 9223372036854775807 0 privvmpages 285727 351885 9223372036854775807 9223372036854775807 0 shmpages 16933 17605 9223372036854775807 9223372036854775807 0 dummy 0 0 0 0 0 numproc 150 303 9223372036854775807 9223372036854775807 0 physpages 314156 326191 0 1280000 0 vmguarpages 0 0 9223372036854775807 9223372036854775807 0 oomguarpages 165355 165355 9223372036854775807 9223372036854775807 0 numtcpsock 89 172 9223372036854775807 9223372036854775807 0 numflock 22 76 9223372036854775807 9223372036854775807 0 numpty 1 2 9223372036854775807 9223372036854775807 0 numsiginfo 0 75 9223372036854775807 9223372036854775807 0 tcpsndbuf 2733472 4371752 9223372036854775807 9223372036854775807 0 tcprcvbuf 1798336 5427296 9223372036854775807 9223372036854775807 0 othersockbuf 491120 1000760 9223372036854775807 9223372036854775807 0 dgramrcvbuf 0 238728 9223372036854775807 9223372036854775807 0 numothersock 361 505 9223372036854775807 9223372036854775807 0 dcachesize 135941831 136114679 9223372036854775807 9223372036854775807 0 numfile 2905 4990 9223372036854775807 9223372036854775807 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 8 9 9223372036854775807 9223372036854775807 0 [root@bni /]# ping 4.2.2.1 PING 4.2.2.1 (4.2.2.1) 56(84) bytes of data. --- 4.2.2.1 ping statistics --- 9 packets transmitted, 0 received, 100% packet loss, time 8493ms [root@bni /]# service postfix stop [root@bni /]# ping 4.2.2.1 PING 4.2.2.1 (4.2.2.1) 56(84) bytes of data. 64 bytes from 4.2.2.1: icmp_seq=1 ttl=53 time=8.63 ms 64 bytes from 4.2.2.1: icmp_seq=2 ttl=53 time=8.62 ms 64 bytes from 4.2.2.1: icmp_seq=3 ttl=53 time=8.63 ms 64 bytes from 4.2.2.1: icmp_seq=4 ttl=53 time=8.66 ms Outbound connections of all sorts fail when postfix is running.

  Read the article

• How to setup a virtual machine in Ubuntu desktop to run Debian Server

  - by stickman

  I want to run a virtual machine in my Ubuntu desktop that runs a Debian server. The purpose of this is to generate Debian packages. I have some C++ applications that were originally developed on my Ubuntu machine, and I need to (re)compile them on a Debian server in order to: build Deb packages for deployment on a Debian server make sure that the applications will definitely work on a debian server The idea is so that I can do 90% of my development on Ubuntu (where I am more comfortable), and deploy a binary package that definitely works on Debian. BTW, I am developing on Karmic Kola (Ubuntu 9.10). [Edit] Following the advice I got so far, I have installed debootstrap and Debian 'Lenny' on /srv/chroot/debian_lenny on my machine. I am not sure this is the server version, but in any case I dont think that matters for my purposes (though it would be useful to know how to specifically install the server version). At the moment though, I am like a fish out of water, since there is no GUI, and it is only a console that I have in the chroot jail. I had a look in the home folder (I cheated, by using the KNavigator in Ubuntu), and there are no folders there - which presumably mean that no users have been set up as yet in the Debian "system". I would like to know how to do the following: Download and install the dev tools needed for (re)compiling my C++ apps Copy my projects from the Ubuntu "system" to the Debian "system" After building the binaries, I would like to create a debian binary package containing all of my binaries, so that I can install the package on a Debian server (my remote server)

  Read the article

• HTTP cache for my virtual machines

  - by MathematicalOrchid

  I have several Linux virtual machines running on my home PC. One of the quirks of Linux is that every time you run a package manager, it wants to "refresh" the configured software repositories - which basically means it wants to download a file from the Internet. If I revert to an earlier snapshot of the VM, then next time I run the package manager it will re-download the exact same data again [since it no longer exists in the VM]. It seems a shame to waste bandwidth endlessly downloading the same data over and over again, so I was wondering if there's some way I can set up some kind of HTTP proxy server that caches downloaded files. I have no idea how you would do such a thing though. In particular, it needs to be set up so that the VMs don't need to "know" that the cache is there; it needs to be transparent. But I don't know how to do that. Any suggestions on what software I'd need to use? It would be nice if I could run it under the Windows host OS, but running a small VM with a Linux guest is also possible...

  Read the article

• Process PHP files from a network share in a vmware virtual machine

  - by nhinkle

  As a testing environment, I have set up a vmware virtual machine running Windows Server 2008 R2. I have Apache and PHP installed (as part of the xampp package). I am doing the development outside of the VM, and so want Apache to serve PHP files from a VM shared folder (which appears as a network share in the VM). I have done this by creating an NTFS symbolic link in Apache's htdocs directory. I can access this directory from the browser, and plain-text files are readable. However, PHP fails to process files, instead returning the following error: Warning: Unknown: failed to open stream: No such file or directory in Unknown on line 0 Fatal error: Unknown: Failed opening required 'C:/xampplite/htdocs/path/to/file.php' (include_path='.;C:\xampplite\php\PEAR') in Unknown on line 0 It appears to be a permissions issue — PHP doesn't seem to be allowed to read the file to process it. However, Apache has no problem opening files in the directory. I cannot figure out how to give PHP the necessary permissions to process the file. Does anybody know of a way to make this work, or else another solution for getting the files into the VM automatically while I develop on the host machine?

  Read the article

• Can I boot up a virtual machine natively?

  - by Anshul

  My question is: Is is possible to run a virtual machine natively on your hardware if you have installed the proper drivers etc? In other words, can I use a VHD as a regular hard drive to boot from? The reason I want to do this is that I do both graphics-intensive and audio-intensive work, but my computer is not powerful enough to handle both at the same time and many times I install a bunch of audio programs that I don't want affecting the stability of my graphics programs. Basically I wanted to have sandboxing between the two sets of applications. So I tried running the graphics-intensive programs in a VirtualBox VM and the audio-intensive work natively (simply because it's a pain to route ASIO audio devices in/out of VirtualBox). This kind-of works - the graphics-intensive stuff is tolerable, but still relatively slow, because it's running inside a VM. So my next idea was to just dual-boot and install the graphics and audio programs in separate partitions but I frequently use them in tandem, so it wouldn't be practical to reboot my machine every time I need to use the other set of programs. But I could live with this scenario: If I need to do more audio-intensive stuff, I'll just boot up to the audio partition and run the graphics programs in a VM, and then when I'm working heavily on the graphics part, I'll just boot the graphics partition as a regular OS directly on the hardware. Is this possible? For example by booting up a VHD as a regular hard drive? Or by setting up dual-boot, and every time the audio partition is shut down, synchronize the graphics VM VHD with the native graphics partition? Is it practical, given the above scenario? And if it's not possible, barring buying another computer, can anyone suggest a best-of-all-worlds setup (the two worlds being performance, sandboxing, and running in parallel) for the above scenario? Thanks in advance.

  Read the article

• Virtual IPv6 Network between VirtualBox VMs

  - by Ben

  I'm trying to create a virtual IPv6 network as a test environment. I have 5 VirtualBox VMs (Ubuntu Server) with network adapters using host-only networking. You can imagine them being connected in series and every machine connects 2 subnets. I want to ping the last machine from the first one: On: 2001:db8:aaaa::100 I want to ping 2001:db8:dddd::101 (Note: there is no cccc network in between) Only static configuration and routes are used: /etc/network/interfaces auto eth0 iface eth0 inet6 static address 2001:db8:aaaa::100 netmask 64 /etc/network/interfaces auto eth0 iface eth0 inet6 static address 2001:db8:aaaa::101 netmask 64 auto eth1 iface eth1 inet6 static address 2001:db8:bbbb::100 netmask 64 up ip -6 route add 2001:db8:dddd::/64 via 2001:db8:bbbb::101 dev eth1 down ip -6 route del 2001:db8:dddd::/64 via 2001:db8:bbbb::101 dev eth1 I thought there might be some automatic route discovery going on. Anyway, ping6 2001:db8:dddd::100 will not work from aaaa::100 When I add the route: ip -6 route add 2001:db8:dddd::/64 via 2001:db8:aaaa::101 it will work. But the next interface in the same network dddd::101 is not reachable. How could that be? There is a machine with an interface bbbb::101 and another dddd::100 and I can ping the latter one, but the machine connected to it, dddd::101 not?? I also have also turned on forwarding. Any ideas?

  Read the article

• 404 not found error for virtual host

  - by qubit

  Hello, In my /etc/apache2/sites-enabled, i have a file site2.com.conf, which defines a virtual host as follows : <VirtualHost *:80> ServerAdmin hostmaster@wharfage ServerName site2.com ServerAlias www.site2.com site2.com DirectoryIndex index.html index.htm index.php DocumentRoot /var/www LogLevel debug ErrorLog /var/log/apache2/site2_error.log CustomLog /var/log/apache2/site2_access.log combined ServerSignature Off <Location /> Options -Indexes </Location> Alias /favicon.ico /srv/site2/static/favicon.ico Alias /static /srv/site2/static # Alias /media /usr/local/lib/python2.5/site-packages/django/contrib/admin/media Alias /admin/media /var/lib/python-support/python2.5/django/contrib/admin/media WSGIScriptAlias / /srv/site2/wsgi/django.wsgi WSGIDaemonProcess site2 user=samj group=samj processes=1 threads=10 WSGIProcessGroup site2 </VirtualHost> I do the following to enable the site : 1) In /etc/apache2/sites-enabled, i run the command a2ensite site2.com.conf 2) I then get a message site successfully enabled, and then i run the command /etc/init.d/apache2 reload. But, if i navigate to www.site2.com, i get 404 not found. I do have an index.html in /var/www (permissions:777 and ownership www-data:www-data), and i have also verified that a symlink was created for site2.com.conf in /etc/apache2/sites-enabled. Any way to fix this ? Thank you.

  Read the article

• Apache Virtual Host with directory aliases

  - by brechtvhb

  I'm trying to set up a dynamic virtual host in apache with a directory alias pointing to a difirent path for every domain. Here's what I'm trying to achive. Say I have 2 domains: * www.domain1.com * www.domein2.com I want both to point to the same index.php file (C:/cms/index.php). Now the hard part ... I want directories or certain file types to point to a diffirent path for each domain. Example: * www.domain1.com/layout -> C:/store/www.domain1.com/layout * www.domain2.com/layout -> C:/store/www.domain2.com/layout * www.domain1.com/image.png -> C:/store/www.domain1.com/image.png * www.domain2.com/image.png -> C:/store/www.domain2.com/image.png However the admin directory should point to the same path again for all sites * www.domain1.com/admin -> C:/cms/admin * www.domain2.com/admin -> C:/cms/admin Is there a way to achieve this kind of behaviour in apache 2.2 without having to create a virtualhost entry for each new domain?

  Read the article

• Xen virtual host can reach some sites but not others

  - by Tun H S Lee

  Okay, this is killing me. Debian Squeeze, Xen 4.0, brand new install. No iptables rules whatsoever except for the ones added by the default xen bridge script. Dom0 can reach the entire world, no problems. DomU can receive packets from some hosts, but not from others. For instance, if I ping Host A, it works fine. If I ping Host B, the DomU reports 100% packet loss. The hosts are random, but consistent (even after reboots). I can see no pattern to why some work and others don't. In fact, in some cases, different virtual hosts on the same server (an other server at a different data center) are divided; some work and others do not. I can reboot (DomU or Dom0 too) and the same hosts will work or fail as before. If I tcpdump on the Host B while pinging from the DomU, everything looks fine. It sees the echo request coming in and says it's sending one back. However, if I tcpdump peth0 on the Dom0, it never sees the echo reply. Any ideas what could be happening? I'm tearing my hair out here.

  Read the article

• Virtual box host-only adapter configuration

  - by Xoundboy

  I have VirtualBox 4 running on Win 7 with a Centos 6 guest VM set up for hosting my dev server. When I'm connected to my home network the guest can be accessed via a static IP address that I configured (192.168.56.2), but not when I'm in the office. I'm guessing that the DHCP server in the office doesn't have a gateway configured for the 192.168.56.x IP range. I read something about the VB host-only adapter that should allow me to set this guest VM up in such a way that I don't need to be on any network to be able to access the guest from the host using a static IP. I've not been able to find out exactly how to configure this though. Can anyone give me an example configuration, thanks. UPDATE: Thanks for your responses. I've now set up a single virtual network adapter in VirtualBox and set it to host-only: C:\Users\Ben>vboxmanage list hostonlyifs Name: VirtualBox Host-Only Ethernet Adapter GUID: d419ef62-3c46-4525-ad2d-be506c90459a Dhcp: Disabled IPAddress: 192.168.56.2 NetworkMask: 255.255.255.0 IPV6Address: fe80:0000:0000:0000:78e3:b200:5af3:2a57 IPV6NetworkMaskPrefixLength: 64 HardwareAddress: 08:00:27:00:94:e8 MediumType: Ethernet Status: Up VBoxNetworkName: HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter On the guest I've set up eth0 to use the same IP address as the host-only adapter (192.168.56.2) but when I try to log in using Putty I still get "Network Error : connection refused". VirtualBox DHCP servier is enabled but I can't ping the gateway (192.168.56.1) from either host nor guest. There's no firewall running on either OS. What next?

  Read the article

• Apache directory access with virtual host

  - by alexeygaidamaka

  I have a virtual host with a configuration like that. When i'm trying to get into foobar.com/dir providing valid username/password pair i get 403 forbidden page instead of that directory contents. www.foobar.com/dir has 777 rights, .httpaswd is chmoded 644. But i can't figure out why i am still not seeing contents. Please, give me a hint. ServerAdmin webmaster@localhost ServerName www.foobar.com ServerAlias www.foobar.com DocumentRoot /var/www/foobar <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/foobar> Options -Indexes FollowSymLinks AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> <Directory /var/www/foobar/dir> AllowOverride AuthConfig AuthName "Authorize yourself, please!" AuthType Basic AuthUserFile /etc/apache2/.htpasswd AuthGroupFile /dev/null Allow from All Order Allow,Deny Require valid-user

  Read the article

• virtual host settings fail on multiple sites

  - by Ricalsin

  Wow. I'm puzzled. On my ubuntu system I've setup an apache2 server and configured three virtual hosts in the /etc/apache2/sites-available directory. a2ensite to symbolic link the sites-enabled. The first two work great; a simple url of localhost.mysitenames.com works great for the first two sites, both finding their DocumentRoot and Directory paths. The third always generates a Bad Request (Invalid Hostname) response. No server error.log as it never hits it. I've copied/pasted the working vhost files, made the minor changes to the ServerName, DocumentRoot and Directory and the same problem persists. I always "sudo /etc/init.d/apache2 restart" whenever I make a change. I've cleared the browser cache as well. No love. There's not a limit to the number of sites you can host, right? My goal was a localhost development environment with the expectation I can run any number of websites locally before pushing them to a live server. Any thoughts on how to debug this? Or, just a simple solution I am missing?

  Read the article

• Virtual host doesn't read .htaccess

  - by Charlie

  I just created virtual host: <VirtualHost myvirtualhost:80> ServerAdmin webmaster@myvirtualhost ServerName myvirtualhost DocumentRoot /home/myname/sites/public_html <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/myname/sites/public_html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> It works, but it cant read .htacces file in public_html: DirectoryIndex otherindex.php I tried change all AllowOverride to All, but I get 500 error. How can I fix this ? thanks.

  Read the article

• Apache Virtual Host with directory aliases

  - by brechtvhb

  Hi, I'm trying to set up a dynamic virtual host in apache with a directory alias pointing to a difirent path for every domain. Here's what I'm trying to achive. Say I have 2 domains: * www.domain1.com * www.domein2.com I want both to point to the same index.php file (C:/cms/index.php). Now the hard part ... I want directories or certain file types to point to a diffirent path for each domain. Example: * www.domain1.com/layout -> C:/store/www.domain1.com/layout * www.domain2.com/layout -> C:/store/www.domain2.com/layout * www.domain1.com/image.png -> C:/store/www.domain1.com/image.png * www.domain2.com/image.png -> C:/store/www.domain2.com/image.png However the admin directory should point to the same path again for all sites * www.domain1.com/admin -> C:/cms/admin * www.domain2.com/admin -> C:/cms/admin Is there a way to achieve this kind of behaviour in apache 2.2 without having to create a virtualhost entry for each new domain?

  Read the article

• Apache directory access with virtual host [SOLVED]

  - by alexeygaidamaka

  I have a virtual host with a configuration like that. When i'm trying to get into foobar.com/dir providing valid username/password pair i get 403 forbidden page instead of that directory contents. www.foobar.com/dir has 777 rights, .httpaswd is chmoded 644. But i can't figure out why i am still not seeing contents. Please, give me a hint. ServerAdmin webmaster@localhost ServerName www.foobar.com ServerAlias www.foobar.com DocumentRoot /var/www/foobar <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/foobar> Options -Indexes FollowSymLinks AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> <Directory /var/www/foobar/dir> AllowOverride AuthConfig AuthName "Authorize yourself, please!" AuthType Basic AuthUserFile /etc/apache2/.htpasswd AuthGroupFile /dev/null Allow from All Order Allow,Deny Options +Indexes<<- that one should be added Require valid-user you have to add the line Options +Indexes to see directory contents

  Read the article

• Virtual machine shows no network adapter

  - by Logman

  I had a an old Lotus/Domino server (R5), I just virtualized. It ran Windows 2000 server. I had to use Vmware Converter v3.x to create the vm because it was the only one I could find that could actually do a Win2k machine that had no service packs. It was just put out to pasture a couple months ago, so it isn't being used except to store the old email for archiving. It took a bit of work to get it onto the Win2008R2 servers hyper-v but I got it there. Problem now, is that the network adapter didn't show up. I could not install the guest additions because it needed sp4 + on win2k... so I installed sp4 onto the vm guest. Everything seems fine except the network adapter still isn;t showing up in device manager. NOthing. Now this server had an external ip, and I did not want it to be put onto the internal virtual network. I am going to use a dedicated adapter on the host (hyper-v server) if that matters... but this shouldn't matter if the the guests network adapter doesn't show at all. Thoughts?

  Read the article

• Virtual host Alias not routing properly

  - by Jacob

  I apologize if this question has been asked many times in the past. I am not 100% sure of the exact cause of my issue and am out of google magic right now. Basically I have a virtual host file setup with an Alias record that points to a different directory other the document root. It basically looks like this <VirtualHost *:80> ServerName iBusinessCentral.com ServerAdmin [email protected] DocumentRoot /var/www/marketingsites/ ServerAlias iBusinessCentral.com *.iBusinessCentral.com Alias /unsub "/var/www/unsub/site_index/" </VirtualHost> When I navigate to ibusinesscentral.com/unsub/?randomquerystring I am directed to the correct folder. If I remove the query string and navigate to ibusinesscentral.com/unsub/ I am taken to the directory in the document root. The unsub directory is a zend application and I need to be able to navigate to different url paths like ibusinesscentral.com/unsub/unenroll?querystring I have tried using AliasMatch instead of Alias. I have also tried adding a slash after the unsub portion of the Alias record, and have not had any luck to this point. Thanks in advance for any assistance

  Read the article

• Creating an IIS 6 Virtual Directory with PowerShell v2 over WMI/ADSI

  - by codepoke

  I can create an IISWebVirtualDir or IISWebVirtualDirSetting with WMI, but I've found no way to turn the virtual directory into an IIS Application. The virtual directory wants an AppFriendlyName and a Path. That's easy because they're part of the ...Setting object. But in order to turn the virtual directory into an App, you need to set AppIsolated=2 and AppRoot=[its root]. I cannot do this with WMI. I'd rather not mix ADSI and WMI, so if anyone can coach me through to amking this happen in WMI I'd be very happy. Here's my demo code: $server = 'serverName' $site = 'W3SVC/10/ROOT/' $app = 'AppName' # If I use these args, the VirDir is not created at all. Fails to write read-only prop # $args = @{'Name'=('W3SVC/10/ROOT/' + $app); ` # 'AppIsolated'=2;'AppRoot'='/LM/' + $site + $app} # So I use this single arg $args = @{'Name'=($site + $app)} $args # Look at the args to make sure I'm putting what I think I am $v = set-wmiinstance -Class IIsWebVirtualDir -Authentication PacketPrivacy ` -ComputerName $server -Namespace root\microsoftiisv2 -Arguments $args $v.Put() # VirDir now exists # Pull the settings object for it and prove I can tweak it $filter = "Name = '" + $site + $app + "'" $filter $v = get-wmiobject -Class IIsWebVirtualDirSetting -Authentication PacketPrivacy ` -ComputerName $server -Namespace root\microsoftiisv2 -Filter $filter $v.AppFriendlyName = $app $v.Put() $v # Yep. Changes work. Goes without saying I cannot change AppIsolated or AppRoot # But ADSI can change them without a hitch # Slower than molasses in January, but it works $a = [adsi]("IIS://$server/" + $site + $app) $a.Put("AppIsolated", 2) $a.Put("AppRoot", ('/LM/' + $site + $app)) $a.Put("Path", "C:\Inetpub\wwwroot\news") $a.SetInfo() $a Any thoughts?

  Read the article

• Mac gcc non-virtual thunk error

  - by fret

  I'm getting these non-virtual thunk errors only in the Deployment build of my app. It uses a private framework called Lgi. Building on 10.5.8 using XCode 3.1.4 (latest for leopard?) The error looks like this: Ld /Users/matthew/Code/Scribe-Branches/v2.00/build/Development/Scribe.app/Contents/MacOS/Scribe normal i386 cd /Users/matthew/Code/Scribe-Branches/v2.00 /Developer/usr/bin/g++-4.0 -arch i386 -L/Users/matthew/Code/Scribe-Branches/v2.00/build/Development -F/Users/matthew/Code/Scribe-Branches/v2.00/build/Development -F/Users/matthew/Code/Lgi/build -F/Users/matthew/Code/Scribe-Branches/v2.00/../../Lgi/build/Development -F/Users/matthew/Code/Scribe-Branches/v2.00/../../Lgi/build/Development -F/Users/matthew/Code/Scribe-Branches/v2.00/../../Lgi/build/Deployment -F/Users/matthew/Code/Scribe-Branches/v2.00/../../Lgi/build/Development -F/Users/matthew/Code/Scribe-Branches/v2.00/../../Lgi/build/Deployment -filelist /Users/matthew/Code/Scribe-Branches/v2.00/build/Scribe.build/Development/Scribe.build/Objects-normal/i386/Scribe.LinkFileList -framework Carbon -framework Lgi -o /Users/matthew/Code/Scribe-Branches/v2.00/build/Development/Scribe.app/Contents/MacOS/Scribe Undefined symbols: "non-virtual thunk to GWindow::OnDrop(char*, GVariant*, GdcPt2, int)", referenced from: vtable for ScribeWndin ScribeApp.o vtable for GShutdownin ScribeApp.o vtable for CalendarUiin Calendar.o vtable for CalendarViewWndin CalendarView.o vtable for CalendarConfigin CalendarView.o vtable for ScribeExportin Exp_Scribe.o vtable for GNewMailDlgin GNewMailDlg.o ....etc for lots of classes.... Anyway I know I'm not leaving those undefined because it does in fact link and run fine in the development build. Now after googling the issue the first thing to try is changing the optimization setting, which I did... and no dice. Some link error. So these virtual functions are initially defined in GDragDropTarget, and GWindow's inheritance looks like this: class LgiClass GWindow : public GView #ifndef WIN32 , public GDragDropTarget #endif (LgiClass being for __declspec export/import on win32) Any ideas on what to try next? Maybe I need to provide more info.

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >