Search Results

Search found 30695 results on 1228 pages for 'old software'.

Page 680/1228 | < Previous Page | 676 677 678 679 680 681 682 683 684 685 686 687  | Next Page >

• Swapping 3Ware Raid Card - Best Procedure

  - by Brian Lee Jackson

  We have a server running an old firmware version and driver (just took this position) on the 3Ware 9650SE Raid Controller... We have been having issues with the server and seemed to have narrowed it down to the Raid Card... I will be replacing the Raid card with the same model of 3Ware 9650SE, however, the card ordered most likely will have newer firmware on it. I managed to backup all the data to a very large drive. My plan is to update the firmware/driver on the current setup (which is still booting) and verify that everything works.. Then throw in the new Raid Card, check the firmware version (not letting it post). And update to newest firmware if needed via Java management utility on the card? Is this the best route? Thanks!

  Read the article

• Cropping a PDF File's Margin During Printing

  - by JavaMan

  I'm using the free Acrobat Reader to print out some pdf documents having very large top/bottom/left/right margins. I want to remove the margins (which are wasting too much space and making the fonts too small). I used to use Acrobat (the paid version having edit features) to crop the src pdf file manually. But since it is an old version it does not support new pdf format and I don't want to upgrade for such a simple use. Is there any free way to crop/remove unwanted white margins from the printed pdf? I am thinking to print the pdf files to a PDF Printer like the Bullzip PDF Printer and enlarge the output file manually so as to remove any white margin. But there does not seem to be such a feature in Bullzip PDF Printer. Is there any other virtual printer software that can be used for this purpose?

  Read the article

• In Enterprise Architect I modified an interface, how to update the realizing classes?

  - by Timo

  I've created an interface in a class model. This interface has two methods, A and B and method A takes an argument (a) and method B does not take an argument (yet). Additionally I've created a class that implements this interface, overriding both methods. After a discussing the model method B now should also take a parameter (b), so I modified the interface to reflect this change. However the class realizing this interface is not updated automatically. For one class it's possible to add the method by re-creating the link between the interface, specify the which method should be implemented and deleting this link again. Then the OLD method signature has to be removed as well. This is a lot of work if there is more then one class implementing the modified interface, not to mention error-prone. Does anybody know how to make an entire class model update this type of dependency?

  Read the article

• NIC: Changing Link Speed & Duplex to Full Duplex Is Drastically Slower

  - by rism

  I have an old Win Xp box with a 100 PRO/100 VE NIC and connecting to a Win 7 box with gigabit NIC via an ASUS gigabit router and peer to peer. I was getting 76% network utilisation on the XP machine using AUTO as the value for Link Speed and Duplex which is fine. But I decided to see what would happen if i selected Full Duplex 100Mbps on the XP box. I thought at worst it would be as good as auto detect since the Win 7 box it's transferring to is faster. Instead network utilisation dropped to 0.12% (as in a 10th of a percent) and the transfers just timed out. No biggie to reverse back to Auto but my question is why is full duplex such a dog? Im not "stuck" but just dont understand. There are only 2 machines here connecting through a router so i cant see how that would cause alot of collisions etc (if thats the problem).

  Read the article

• Asterisk does not recognise DTMF tones from mobile phones

  - by Eugene van der Merwe

  We have an Asterisk 1.8.7.0 (the Elastix derivative) switchboard. Every since a month ago, seemingly out of the blue, the switchboard does not recognise DTMF tones any more from mobile phones. Testing the switchboard using 7777 works. Testing the switchboard from a normal phones works. Testing the switchboard from a mobile phone fails. Looking at the log file I can't see anything. I used 'asterisk -rvvvv' and 'tail -f /var/log/asterisk/full' to see the live output and scan the logs. I guess I don't see anything because it's simply not recognising the DTMF tones. I did brief research and found an old setting for SIP phones, 'rfc2833compensate=yes', and tried adding this to 'sip_general_custom.conf'. After that I did 'core restart when convenient' but that didn't make any difference. Could anyone give me some additional troubleshooting steps?

  Read the article

• 3 Monitors 2 different graphic cards

  - by Michael

  I am looking to add a third monitor to my workstation. I currently have 2 monitors connected to a geforce gt 120. I am wanting to find the cheapest solution on adding another monitor, I have a old ati x300 laying around and wanting to know if I would be able to use that to power the other monitor and if it would conflict with my other graphic card (I am not a gamer). What I want to do is have the at x300 power 1 monitor via dvi and the gt 120 power 2 monitors via vga and dvi. Thanks edit: im running windows 7 64bit

  Read the article

• Windows 7 setup can not find hard disk

  - by Akshay Kulkarni

  Previously I had an old Seagate barracuda 160GB HDD which got crashed some days before. Yesterday I bought new Hard Disk Seagate Barracuda 500GB (ST500DM002). I just replaced the 500GB hard disk with 160GB one leaving data and power cable intact and untouched. And ideally this new hard disk should start functioning. I tried to install Windows 7 with DVD the setup says you don't have any hard disks installed on your machine. I rechecked connection tried with Win XP setup but continued receiving same error. Do I need to do some initialization stuff with hard disk before installing setup? If so how to do it. If not then is there any problem with my newly bought hard disk? Thanks In Advance.

  Read the article

• Compaq nc4200 screen cutting out and keyboard lagging after dropping - could I repair this?

  - by Holly Gray

  I have a HP Compaq nc4200 laptop. I got it from a family member who no longer needed it, who got it from a sale of old office equipment, so it's at the very least third-hand, and somewhat battered. Today, I dropped it. It seemed unharmed at first, but the screen cuts out every few minutes (sometimes seconds), then fades back. Keyboard input also occasionally starts lagging, as does the mouse. It might be a coincidence, but, oddly, it seems as if, when the screen cuts out, it comes back sooner if I use the trackpad. Is this something that I could fix? What might be causing it?

  Read the article

• Know which Apps to Remove From MSConfig with this Startup Applications List

  - by Mit Naik

  Just found userfull information on Internet and thought it would help all of users. This list of startup applications is a really handy resource for cleaning up msconfig entries that have overtaken old computers. It catalogs tons of different startup programs, what they do, and which ones you should delete, leave running, or decide based on the program's usefulness. It even has a nice search box so you can search through the tens of thousands of entries. Hit the link below to check it out, and if your relatives' computer is especially broken, be sure to check out our guide to fixing your relatives' terrible computer. http://www.sysinfo.org/startuplist.php Please update the list here if you got any other tools or sites which can be help full to others

  Read the article

• Free MPEG cutting/cropping/editing tool

  - by Stijn Sanders

  I'm looking for a free tool to cut MPEG's that are created by recording from a USB cable receiver. There are a number of applications that do this, and some are free, but most of them take the video and audio decoded and pass them into a codec again to write the final output. I already have the MPEG's encoded the way I like, so what I need is a tool that can strip the beginning and the ending of the recording before and optionally commercial breaks, by rearranging the data within the file, not re-encoding it. Now I'm using some old software that came with the cable-receiver, but this actually re-encodes the video when exporting. I've tried VirtualDub but had major trouble getting the audio and video streams to stay in sync (and this was also re-encoding)... I found this which comes pretty close, but doesn't allow much accuracy in selecting cut positions.

  Read the article

• Rhythmbox - put a playlist on my iPod

  - by GorillaSandwich

  I have an old iPod nano and currently use iTunes in Windows to management. However, I'm trying to switch to Ubuntu. So far, iPod management is one major holdup. Besides being unable to easily manage podcasts, I also don't see a way to create a playlist and put it on my iPod. I can create a playlist on the computer in Rhythmbox, but I can't drag and drop it onto the iPod. I can create a playlist on the iPod itself, put I can't drag and drop songs from my library into it. If I right-click the songs, I can add them to playlists on the computer, but not on the iPod. How can I create a playlist of music in Rhythmbox and sync it to my iPod?

  Read the article

• Recommendation for PCI SATA addon card?

  - by edmicman

  I have a couple of dead PCs from my wife's office that have working SATA HDDs. Sorry, I don't know if they're SATA I or II, just that they're SATA. Unfortunately, all my spare hardware at home is pretty old; all I have is IDE support. I was thinking I could get a PCI addon card on the cheap that would support SATA and put together a budget server of sorts to play with and be able to use those drives. So I've got a couple questions: After some searching it looks like I can get an addon card for ~20 bucks, but it looks like they're all SATA I? Would that matter? It looks like going to SATAII bumps the price up to $40-$60 or so. Are there any recommendations on a card to get?

  Read the article

• OpenLDAP RHEL 6

  - by AndyM

  Hi all I've been configuring OpenLDAP on RHEL 6 and its seems you have run the following to rebuild the config dirs. I'm ok with that , but my issues is , say I want to change the server passwd , do I have to go through the whole process every time I change the config ? Is there a way of changing the slapd config after its been built using the RHEL6 method ? below is the advice I've found on the net from http://www.linuxtopia.org/online_books/rhel6/rhel_6_migration_guide/rhel_6_migration_ch07s03.html This example assumes that the file to convert from the old slapd configuration is located at /etc/openldap/slapd.conf and the new directory for OpenLDAP configuration is located at /etc/openldap/slapd.d/. Remove the contents of the new /etc/openldap/slapd.d/ directory: rm -rf /etc/openldap/slapd.d/* Run slaptest to check the validity of the configuration file and specify the new configuration directory: slaptest -f /etc/openldap/slapd.conf -F /etc/openldap/slapd.d Configure permissions on the new directory: chown -R ldap:ldap /etc/openldap/slapd.d chmod -R 000 /etc/openldap/slapd.d chmod -R u+rwX /etc/openldap/slapd.d

  Read the article

• How can I migrate websites between two identical servers?

  - by edude05

  I have two servers that have a nearly identical (software) configuration. We are upgrading the web servers to run windows server 2008 R2, one already is however the main one (that currently has sites) is on WS2008. Now, the old server is ns.mydomain.com and the new server is ns1.mydomain.com. Since dns automatically fails over to ns1.mydomain.com I'd like a way to move all the vhosts to the new server. Is there an automatic way to move / recreate all the vhosts on the new server? I have figured out how to migrate the DNS records already DNS Migration and since both servers are on the same private network migrating the website data isn't a large issue. Every site is running PHP & MySQL and the MySQL server is external so the records won't have to be moved. Thanks

  Read the article

• Kubuntu Monitor Out of Range

  - by uncleo

  My X server seems to be faulty, but I don't know why. I had some problems last week with a new motherboard, but they seemed to be resolved. Today, I updated Kubuntu and restarted, but my Viewsonic VX900 LCD monitor shows the splash screen for several seconds, then displays the message "Out of Range" I have tried various kernels in Grub, some in recovery mode, most do the same thing. No key combinations bring up a shell prompt like I expect. The one exception was a very old kernel, that would only mount the file system as read-only, so I can't fix up the xorg.conf file. Is there anything to be done?

  Read the article

• Migrate an intermediate CA to a new root

  - by Tim Brigham

  Using the Microsoft CA is there any way to cut over to a new certificate authority from an intermediate authority? Both my systems are Microsoft CAs - I have a 2008 R2 Enterprise CA (intermediate) and an old 2003 CA (root). The 2003 box bit the dust and I don't have good backups. I still have a few months before the CRL expires; instead of having to cut over to a new intermediate authority is there a ready way to simply point this intermediate authority to a new offline CA?

  Read the article

• Configuring CentOS for Heavy-ish Traffic

  - by Jonathan Sampson

  New sysadmin here, managing a CentOS server. This past week has been one of the most exciting weeks of my career, and full of learning all sorts of new things. Today I have another task though, and that is to make sure our server can handle more than what our old shared-hosting was capable of. We were originally limited to 200 concurrent connections on our GoDaddy shared-hosting. Eventually we out-grew this (usually during campaigns/marketing events) and moved on to a Virtual Dedicated Server. I'm assuming the number of connections would be handled by Apache. What configurations should I be mindful of in order to allow more traffic in?

  Read the article

• Can I upgrade my computer to run SC2 smoothly?

  - by Citizen

  My desktop is: ACPI x86 AMD Athlon x2 Dual Core 3600 1.9ghz 1 gig ram NVIDIA Geforce 7300 I'm running 32 bit windows vista. My budget is ~$250 When I play SC2, its incredibly slow and I have to play with the graphics on the LOWEST settings. What can/should I buy (specifically) to get this to run SC2 smoothly? Are max setting possible? I'm not sure what I can get that will be for sure compatible + will actually do the trick. Or is my computer simply too old?

  Read the article

• Why Does My iMac Keep Setting the Screen Brightness to 'Full'?

  - by TomB

  I have a 2 week old 24" iMac running Mac OS X 10.6. It is the primary monitor with the menu bar on the top of display. I have an external monitor as well, a 19" Viewsonic LCD. The LCD is set to the left side of the iMac, rotated 90 degrees CCW and has the Dock along the far left edge. When I restart the screen brightness on the iMac reverts to Full brightness. The Viewsonic LCD retains the setting I have for it. I am using a Mini DVI to DVI cable for the external display. I even tried setting my Huey Pro to do automatic screen adjustment based on ambient lighting but the iMac still goes to stun with a reboot. I am sure it is something dumb I have overlooked.

  Read the article

• Computer Won't Boot After New Power Supply

  - by Haxelgem

  I recently bought a Rosewill 750-M PSU to replace an Antec Earthwatts 500. My computer worked fine before making the switch. After installing the Rosewill PSU, I attempted to boot. Fans spun up for a second, then turned off. After a second, they spun up again and stayed on. However, I had no video output. I put the old Antec PSU back in, and still had the same problem. I put another GPU in the computer, trying both PSUs, and still nothing. I switched out the monitor also, which didn't work. What should I do?

  Read the article

• How to retrieve all MySQL settings?

  - by Max Kielland

  I have a configured MySQL server (MySQL 5.1.47-community) that works perfect. I installed a second server (MySQL 5.5.15-community) to see if the new version of MySQL would work with my application before upgrading. When I run the application against the new server it behaves different. When I run it against the old server (MySQL 5.1.47-community) everything works perfect. I remember that I set some parameters through the MySQL prompt to accept larger result set and some other stuff, now I can't remember what I did. So my question is: Is there a way to transfer all the MySQL settings from one server to another? Thanks.

  Read the article

• How to retrieve all MySQL settings?

  - by Max Kielland

  I have a configured MySQL server (MySQL 5.1.47-community) that works perfect. I installed a second server (MySQL 5.5.15-community) to see if the new version of MySQL would work with my application before upgrading. When I run the application against the new server it behaves different. When I run it against the old server (MySQL 5.1.47-community) everything works perfect. I remember that I set some parameters through the MySQL prompt to accept larger result set and some other stuff, now I can't remember what I did. So my question is: Is there a way to transfer all the MySQL settings from one server to another? Thanks.

  Read the article

• USB cable model for Kodak EasyShare Z740

  - by Robert Munteanu

  I've lost the original USB cable for my Kodak EasyShare Z740, and I can't figure out which model I should replace it with. I did not find the original parts, as the camera is pretty old. I did find the cable on the Kodak site, but I I've tried both mini-USB and micro-USB and neither fit. Alternatively, bonus points for pointing out a dealer in Bucharest, Romania which has the original part. N.B. I do use a card reader now, but I find it more convenient to use the cable.

  Read the article

• Are periodic full backups really necessary on an incremental backup setup?

  - by user2229980

  I intend to use an old computer I have as a remote backup server for myself and a few other people. We are all geographically separated, and the plan is to do incremental daily backups using rsync and ssh. My original idea was to make one initial full backup then never again have to deal with the overhead of doing it, and from that moment on only copy the files changed since the last backup. I've been told that this could be bad, but I fail to understand why. Since each snapshot is comprised of hard links to the unchanged files plus the original changed ones, isn't it going to be identical to a new full backup? Why would I want to make another full backup?

  Read the article

• VMWare shared folder out of sync

  - by JochenJung

  After booting the guest system, the shared folders are in sync and all works well. But as soon, as I make a change to one of the files on my host system (Windows 7), the file on the guest system (Ubuntu) looses its last characters and still has the old version. So the actual change is not synced. However the version on the guest gets truncated. If I delete the file on the host and create a new one with new content, everything is in sync again. It all started happening when I updated VMWare player 6.0.1. And its happening for my Ubuntu guests only (Redhat works fine). How can I tell VMware tools to force a sync on the shared folders? Host: Windows 7 Guest: Ubuntu 12.04.3 LTS VMWare: 6.0.1 build-1379776 VMWare-Tools: VMwareTools-9.6.1-1378637.tar.gz

  Read the article

< Previous Page | 676 677 678 679 680 681 682 683 684 685 686 687  | Next Page >