Search Results

Search found 18191 results on 728 pages for 'single board'.

Page 687/728 | < Previous Page | 683 684 685 686 687 688 689 690 691 692 693 694  | Next Page >

  • Choice of an OS for a home ZFS NAS

    - by OlafM
    I am preparing a home NAS with an old Athlon 64 X2 3800+, 4 GB ECC RAM, Asus M2V MX motherboard, and a single 3 TB WDC Green (another one as mirror may be installed in the future). It's the cheapest solution I found that includes ECC memory and the higher energy consumption is offset by the lower (zero) cost of acquisition. The system will be used for: music storage and stream to other desktop computers; storage of the scanned dia slides (3-4k slides, 180 MB TIFF each one plus reduced quality JPEG version); stream of these photos to a local iPad 2 (maybe Plex App? not yet sure); (one additional) remote backup via rsync/ssh or ZFS send/receive. It will be controlled via remote ssh, maybe VNC, no monitor attached. Absolute requirement is a reliable ZFS solution, plus the ability to easily install packets/software/virtual machines and to update remotely (I will be the admin and I don't live near the NAS). I have mainly three options: NAS4free/FreeNAS OpenIndiana Solaris Express 11 (yeah yeah I know the license requirements, I will write a perl script on it to count it as development machine). Problems: NAS4free/FreeNAS (I tested only NAS4free) required embedded installation for remote upgrading, but full install for easy addition of software packets. Since I need at least AirVideo Server (linux/win) and Plex App (win/linux) to stream the photos and some videos to iPad (they both require virtualbox), but I cannot be there to install updates, NAS4free/FreeNAS are excluded. http://www.nas4free.org/general_information.html explains the issue: embedded can be remotely updated, full cannot. Solaris has also another advantage: Crashplan client supports Solaris and I'm already using it for other backups. I would like to leave the option open, even if I will be doing backups probably through zfs send/receive. NexentaStor was left out because zfs send/receive are not included in the free version. The question is now Solaris 11 Express over OpenIndiana. To ease the management, I will be using http://www.napp-it.org Which one would you suggest and why? I found lots of informations and it's difficult for me to decide. I think (from the napp-it manual) that Solaris has some additional options for SMB shares, but are they really needed at home? I think I won't even use ACLs, since normal unix-style permissions are enough. OpenIndiana has maybe more frequent updates (Solaris offers only security updates between releases), but again, do I need them? I don't think so. Moreover, this is a NAS that has to work and nothing else, I cannot risk having problems that require me to access the server. Isn't OpenIndiana a bit more... cutting edge (in the Solaris world)? I'm just asking, no need to focus on this for the answer :-) I would limit myself to these two options (SE11.1/OI) also because I will be making a NAS for me in the future (where high performances with Mac shares are also required) and Solaris has kernel support for AFP. I will use this server to gather experience as well. After this long question, thanks in advance! If you need additional info, let me know and I will update this post.

    Read the article

  • Asus P8P67 Rev. 3.1 Motherboard issues powering on and saving settings

    - by Scott
    Edit: New Information Have some updated information from the old question below: So basically my issue right now is somewhat similar, but I've been able to rule out a couple of things. I don't think this has anything to do with light on the motherboard. No matter what lights are on/off on the motherboard when the computer is off, they don't affect this issue. The main power LED on the Mobo is always lit when the power supply is turned on, and that's what matters anyway. Even when the main power LED is on, the PC will NOT boot up the first time I hit the power switch. I have to go reset the power supply (make all lights turn off on the Mobo and back on), and THEN hit the power switch. Then everything boots up. Also, the BIOS settings are reset every time this happens. Asus Tech Support told me to try jumping the power with something metal to try and rule out that it's a problem with the connectors getting power, or if it's a problem with the case power switch pins - haven't done that yet though. Any ideas? This is a lot simpler than it was before when I thought it had to do with certain LED indicators for RAM, EPU, etc. Original Question So I built my new desktop just about 3 weeks ago. I've been having a few issues which I think are all related to my motherboard, an Asus P8P67 Revision 3.1, but I'm not 100% sure as this is really the first from-scratch build I've ever done. I've posted these questions on the Asus forums, Asus Tech Support, and the Corsair forums as well as I thought it might have something to do with my power supply at one point. None of these avenues have solved my issue until now completely, so I thought I'd come here to see what you guys think. Here's what's happening: My computer is off, and I go to power it on. I press the power switch on the case (Antec Nine Hundred), and nothing seems to happen. Upon further inspection, I see that what this actually does is simply turn on the EPU LED on my motherboard, but doesn't actually boot anything up. I then have to go and flip the main power switch on the power supply off and back on. What this does is turn off all lights on the Motherboard after a few seconds, and turn them all back on (including the EPU LED that was off before I hit the power switch the first time). Now, hitting the power switch works. The machine boots up fine, and starts going through the boot up process. As a side note: My Motherboard is set to "Force BIOS", and every single time I change this to do the opposite, the next time my computer boots up that change reverts itself. I think this may be due to the fact that I am doing the hard reset on the power supply each time, but I'm not sure. I had thought that the Motherboard would keep its BIOS settings unless you did something to the Mobo itself - so this may be a related issue, or something else completely. That's basically it. Once it's on, it's on. It works fine, recognizes all of my hardware, and runs great. All fans/lights in the case work great, and I'm getting standard readings. The next time I go to shut the computer down however, I can expect the same exact process getting it up and running, including being forced to go into BIOS and exit again before I can load Windows. Another side note: If I power on my computer using the power switch DIRECTLY after shutting it down, it powers right back on (I think this is because the EPU LED light doesn't have time to turn off). It looks as if as long as the EPU LED is lit up on the motherboard before I hit the power switch on the case, the thing will boot up fine (although this doesn't explain the "Force BIOS" issue, at least it's something). Any ideas? Thanks guys. P.S. - System Specs Asus P8P67 Rev. 3.1 Motherboard Intel Core i7 2600K Processor 16GB (4x4GB) G-Skill 1600 RAM NVIDIA EVGA GTX 570 Video Card Crucial 128GB SSD HD Corsair 850W Power Supply Seagate 2TB HDD

    Read the article

  • My computer freezes irregurarly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 50-60. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) My current to-try list Change the thermal paste on my CPU. Change my graphic card with a temporary one and stress the computer. Change my power supply. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • Windows 7 inbuilt and 3rd party (de)fragmentation related queries

    - by Karan
    I have a pretty good idea of how files end up getting fragmented. That said, I just copied ~3,200 files of varying sizes (from a few KB to ~20GB) from an external USB HDD to an internal, freshly formatted (under Windows 7 x64), NTFS, 2TB, 5400RPM, WD, SATA, non-system (i.e. secondary) drive, filling it up 57%. Since it should have been very much possible for each file to have been stored in one contiguous block, I expected the drive to be fragmented not more than 1-2% at most after this rather lengthy exercise (unfortunately this older machine doesn't support USB 3.0). Windows 7's inbuilt defrag utility told me after a quick analysis that the drive was fragmented only 1% or so, which dovetailed neatly with my expectations. However, just out of curiosity I downloaded and ran the latest portable x64 version of Piriform's Defraggler, and was shocked to see the drive being reported as being ~85% fragmented! The portable version of Auslogics Disk Defrag also agreed with Defraggler, and both clearly expected to grind away for ~10 hours to completely defragment the drive. 1) How in blazes could the inbuilt and 3rd party defrag utils disagree so badly? I mean, 10-20% variance is probably understandable, but 1% and 85% are miles apart! This Engineering Windows 7 blog post states: In Windows XP, any file that is split into more than one piece is considered fragmented. Not so in Windows Vista if the fragments are large enough – the defragmentation algorithm was changed (from Windows XP) to ignore pieces of a file that are larger than 64MB. As a result, defrag in XP and defrag in Vista will report different amounts of fragmentation on a volume. ... [Please read the entire post so the quote is not taken out of context.] Could it simply be that the 3rd party defrag utils ignore this post-XP change and continue to use analysis algos similar to those XP used? 2) Assuming that the 3rd party utils aren't lying about the real extent of fragmentation (which Windows is downplaying post-XP), how could the files have even got fragmented so badly given they were just copied over afresh to an empty drive? 3) If vastly differing analysis algos explain the yawning gap, which do I believe? I'm no defrag fanatic for sure, but 85% is enough to make me seriously consider spending 10 hours defragging this drive. On the other hand, 1% reported by Windows' own defragger clearly implies that there is no cause for concern and defragging would actually have negative consequences (as per the post). Is Windows' assumption valid and should I just let it be, or will there be any noticeable performance gains after running one of the 3rd party utils for 10 hours straight? 4) I see that out of the box Windows 7 defrag is scheduled to run weekly. Does anyone know whether it defrags every single time, or only if its analysis reveals a fragmentation percentage over a set threshold? If the latter, what is this threshold and can it be changed, maybe via a Registry edit? Thanks for reading through (my first query on this wonderful site!) and for any helpful replies. Also, if you're answering question #3, please keep in mind that any speed increases post defragging with 3rd party utils vis-à-vis Windows' inbuilt program should not include pre-Vista (preferably pre-Win7) examples. Further, examples of programs that made your system boot faster won't help in this case, since this is a non-system drive (although one that'll still be used daily).

    Read the article

  • FFMPEG dropping frames while encoding JPEG sequence at color change

    - by Matt
    I'm trying to put together a slide show using imagemagick and FFMPEG. I use imagemagick to expand a single photo into 30fps video (imagemagick also handles things like putting some text captions on the frames along the way). When I go to let ffmpeg digest it into a video it clips along nicely on the color parts of the video, but when it gets to a black and white section it reports "frame= 2030 fps=102 q=32766.0 Lsize= 5203kB time=00:01:07.60 bitrate= 630.5kbits/s dup=0 drop=703" and drops every frame of video until it hits something with color. As you can imagine this results in entire photos being removed from the slideshow. Here is my latest dump... ffmpeg -y -r 30 -i "teststream/%06d.jpg" -c:v libx264 -r 30 newffmpeg.mp4 ffmpeg version git-2012-12-10-c3bb333 Copyright (c) 2000-2012 the FFmpeg developers built on Dec 10 2012 22:02:04 with gcc 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) configuration: --enable-gpl --enable-libfaac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libx264 --enable-nonfree --enable-version3 libavutil 52. 12.100 / 52. 12.100 libavcodec 54. 79.101 / 54. 79.101 libavformat 54. 49.100 / 54. 49.100 libavdevice 54. 3.102 / 54. 3.102 libavfilter 3. 26.101 / 3. 26.101 libswscale 2. 1.103 / 2. 1.103 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 2.100 / 52. 2.100 Input #0, image2, from 'teststream/%06d.jpg': Duration: 00:12:02.80, start: 0.000000, bitrate: N/A Stream #0:0: Video: mjpeg, yuvj444p, 720x480 [SAR 72:72 DAR 3:2], 25 fps, 25 tbr, 25 tbn, 25 tbc [libx264 @ 0x3450140] using SAR=1/1 [libx264 @ 0x3450140] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x3450140] profile High, level 3.0 [libx264 @ 0x3450140] 264 - core 129 r2 1cffe9f - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'newffmpeg.mp4': Metadata: encoder : Lavf54.49.100 Stream #0:0: Video: h264 ([33][0][0][0] / 0x0021), yuvj420p, 720x480 [SAR 1:1 DAR 3:2], q=-1--1, 15360 tbn, 30 tbc Stream mapping: Stream #0:0 - #0:0 (mjpeg - libx264) Press [q] to stop, [?] for help Input stream #0:0 frame changed from size:720x480 fmt:yuvj444p to size:720x480 fmt:yuvj422p Input stream #0:0 frame changed from size:720x480 fmt:yuvj422p to size:720x480 fmt:yuvj444pp=584 frame= 2030 fps=102 q=32766.0 Lsize= 5203kB time=00:01:07.60 bitrate= 630.5kbits/s dup=0 drop=703 video:5179kB audio:0kB subtitle:0 global headers:0kB muxing overhead 0.472425% [libx264 @ 0x3450140] frame I:9 Avg QP:20.10 size: 33933 [libx264 @ 0x3450140] frame P:636 Avg QP:24.12 size: 6737 [libx264 @ 0x3450140] frame B:1385 Avg QP:27.04 size: 514 [libx264 @ 0x3450140] consecutive B-frames: 2.5% 15.2% 13.2% 69.2% [libx264 @ 0x3450140] mb I I16..4: 8.3% 80.3% 11.5% [libx264 @ 0x3450140] mb P I16..4: 1.5% 2.5% 0.2% P16..4: 41.7% 18.0% 10.3% 0.0% 0.0% skip:25.9% [libx264 @ 0x3450140] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 26.6% 0.6% 0.1% direct: 0.2% skip:72.3% L0:35.0% L1:60.3% BI: 4.7% [libx264 @ 0x3450140] 8x8 transform intra:64.1% inter:75.1% [libx264 @ 0x3450140] coded y,uvDC,uvAC intra: 51.6% 78.0% 43.7% inter: 10.6% 14.9% 2.1% [libx264 @ 0x3450140] i16 v,h,dc,p: 29% 19% 6% 46% [libx264 @ 0x3450140] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 23% 15% 17% 5% 9% 10% 7% 8% 6% [libx264 @ 0x3450140] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 31% 18% 11% 5% 9% 10% 6% 6% 4% [libx264 @ 0x3450140] i8c dc,h,v,p: 46% 18% 24% 12% [libx264 @ 0x3450140] Weighted P-Frames: Y:20.1% UV:18.7% [libx264 @ 0x3450140] ref P L0: 59.2% 23.2% 13.1% 4.3% 0.2% [libx264 @ 0x3450140] ref B L0: 88.7% 8.3% 3.0% [libx264 @ 0x3450140] ref B L1: 95.0% 5.0% [libx264 @ 0x3450140] kb/s:626.88 Received signal 2: terminating. One last note: If I remove the -r 30 from the input and output it works flawlessly. I have no idea why the -r 30 is causing it to freak out.

    Read the article

  • Parallel processing slower than sequential?

    - by zebediah49
    EDIT: For anyone who stumbles upon this in the future: Imagemagick uses a MP library. It's faster to use available cores if they're around, but if you have parallel jobs, it's unhelpful. Do one of the following: do your jobs serially (with Imagemagick in parallel mode) set MAGICK_THREAD_LIMIT=1 for your invocation of the imagemagick binary in question. By making Imagemagick use only one thread, it slows down by 20-30% in my test cases, but meant I could run one job per core without issues, for a significant net increase in performance. Original question: While converting some images using ImageMagick, I noticed a somewhat strange effect. Using xargs was significantly slower than a standard for loop. Since xargs limited to a single process should act like a for loop, I tested that, and found it to be about the same. Thus, we have this demonstration. Quad core (AMD Athalon X4, 2.6GHz) Working entirely on a tempfs (16g ram total; no swap) No other major loads Results: /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 0m3.784s user 0m2.240s sys 0m0.230s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 0m9.097s user 0m28.020s sys 0m0.910s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 0m9.844s user 0m33.200s sys 0m1.270s Can anyone think of a reason why running two instances of this program takes more than twice as long in real time, and more than ten times as long in processor time to complete the same task? After that initial hit, more processes do not seem to have as significant of an effect. I thought it might have to do with disk seeking, so I did that test entirely in ram. Could it have something to do with how Convert works, and having more than one copy at once means it cannot use processor cache as efficiently or something? EDIT: When done with 1000x 769KB files, performance is as expected. Interesting. /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.679s user 5m6.980s sys 0m6.340s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.152s user 5m6.140s sys 0m6.530s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 2m7.578s user 5m35.410s sys 0m6.050s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 4 convert -auto-level real 1m36.959s user 5m48.900s sys 0m6.350s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 1m36.392s user 5m54.840s sys 0m5.650s

    Read the article

  • How to use Public IP in case of two ISP when two differs from each other

    - by user1471995
    Please bare with my long explanation but this is important to explain the actual problem. Please also pardon my knowledge with PFsense as i am new to this. I have single PFSense box with 3 Ethernet adapter. Before moving to configuration for these, i want to let you know i have two Ethernet based Internet Leased Line Connectivity let's call them ISP A and ISP B. Then last inetrface is LAN which is connected to network switch. Typical network diagram ISP A ----- PFSense ----> Switch ---- > Servers ISP B ----- ISP A (Initially Purchased) WAN IP:- 113.193.X.X /29 Gateway IP :- 113.193.X.A and other 4 usable public IP in same subnet(So the gateway for those IP are also same). ISP B (Recently Purchased) WAN IP:- 115.115.X.X /30 Gateway IP :- 115.115.X.B and other 5 usable public IP in different subnet(So the gateway for those IP is different), for example if 115.119.X.X2 is one of the IP from that list then the gateway for this IP is 115.119.X.X1. Configuration for 3 Interfaces Interface : WAN Network Port : nfe0 Type : Static IP Address : 113.193.X.X /29 Gateway : 113.193.X.A Interface : LAN Network Port : vr0 Type : Static IP Address : 192.168.1.1 /24 Gateway : None Interface : RELWAN Network Port : rl0 Type : Static IP Address : 115.115.X.X /30 (I am not sure of the subnet) Gateway : 115.115.X.B To use Public IP from ISP A i have done following steps a) Created Virtual IP using either ARP or IP Alias. b) Using Firewall: NAT: Port Forward i have created specific natting from one public IP to my internal Lan private IP for example :- WAN TCP/UDP * * 113.193.X.X1 53 (DNS) 192.168.1.5 53 (DNS) WAN TCP/UDP * * 113.193.X.X1 80 (HTTP) 192.168.1.5 80 (HTTP) WAN TCP * * 113.193.X.X2 80 (HTTP) 192.168.1.7 80 (HTTP) etc., c) Current state for Firewall: NAT: Outbound is Manual and whatever default rule are defined for the WAN those are only present. d) If this section in relevant then for Firewall: Rules at WAN tab then following default rule has been generated. * RFC 1918 networks * * * * * Block private networks * Reserved/not assigned by IANA * * * * * * To use Public IP from ISP B i have done following steps a) Created Virtual IP using either ARP or IP Alias. b) Using Firewall: NAT: Port Forward i have created specific natting from one public IP to my internal Lan private IP for example :- RELWAN TCP/UDP * * 115.119.116.X.X1 80 (HTTP) 192.168.1.11 80 (HTTP) c) Current state for Firewall: NAT: Outbound is Manual and whatever default rule are defined for the RELWAN those are only present. d) If this section in relevant then for Firewall: Rules at RELWAN tab then following default rule has been generated. * RFC 1918 networks * * * * * * Reserved/not assigned by IANA * * * * * * Last thing before my actual query is to make you aware that to have multiple Wan setup i have done following steps a) Under System: Gateways at Groups Tab i have created new group as following MultipleGateway WANGW, RELWAN Tier 2,Tier 1 Multiple Gateway Test b) Then Under Firewall: Rules at LAN tab i have created a rule for internal traffic as follows * LAN net * * * MultipleGateway none c) This setup works if unplug first ISP traffic start routing using ISP 2 and vice-versa. Now my main query and problem is i am not able to use public IP address allocated by ISP B, i have tried many small tweaks but not successful in anyone. The notable difference between the two ISP is a) In case of ISP A there Public usable IP address are on same subnet so the gateway used for the WAN ip is same for the other public IP address. b) In case of ISP B there public usable IP address are on different subnet so the obvious the gateway IP for them is different from WAN gateway's IP. Please let me know how to use ISP B public usable IP address, in future also i am going to rely for more IPs from ISP B only.

    Read the article

  • Issues Converting Plain Text Into Microsoft Word Bulleted Lists

    - by user787832
    I'm a programmer. I hate status reports. I found a way to live with it. While I am working in my IDE ( Visual Slickedit ) I keep a plain text file open in one of the file/buffer tabs. As I finish things I just jot down a quick note into that file. At the end of the week that becomes my weekly status report. Example entries: The Datatables.net plugin runs very slowly in IE 8 with more than 2,000 records. I changed the way I did the server side code to process the data to make less work for the plugin to get decent performance for the IE 8 users. I made a class to wrap data from the new data collection objects into the legacy data holder objects. This will let the new database code be backward compatible with the legacy code until we can replace it. I found the bug reported by Jane. The software is fine. The database we use for the test site has data that is corrupted in a way it wouldn't be for production site At the end of the month I go back to each weekly *.txt file and paste all of the entries into a MS Word file for a monthly report. I give the monthly report to a liason to the contracting company who has to compile everyone's monthly reports into a single MS Word 2007 document. His problem, soon to be my problem, comes when he highlights my paragraphs like the ones above to put bullets in front of my paragraphs. When he highlights my notes to put bullets in front of them with MS Word 2007, Word rearranges the text a bit and the new line chars/carriage returns stagger the text so the text is no longer in neat chunks. This: I found the bug reported by Jane. The software is fine. The database we use for the test site has data that is corrupted in a way it wouldn't be for production site Becomes This: I found the bug reported by Jane. The software is fine. The database we use for the test site has data that is corrupted in a way it wouldn't be for production site I tried turning word wrap on in my IDE for the text files I put my status notes in. It just puts some kind of newline character in anyway. Searching/Replacing those chars in the text files has the result of destroying the paragraphs. Once my notes are pasted into MS Word, Word automatically translates them into paragraph breaks. Searching/Replacing them there has similar results. Blank lines separating the notes disappears. One big mess. What I would like is to be able to keep adding my status notes to a text file as I am now, but do something different when I paste the notes into MS Word such that my liason can select the text, hit the bulleting command and NOT have the staggered text as shown above. Any ideas? Thanks much in advance Steve

    Read the article

  • Too many Bind query (cache) denied, DNS attack?

    - by Jake
    Once Bind crashed and I did: tail -f /var/log/messages I see a massive number of logs every second. Is this a DNS attack? or is there something wrong? Sometimes I see a domain in logs like this: dOmAin.com (upper and lower). As you see there is only one single domain in the logs with different IPs Oct 10 02:21:26 mail named[20831]: client 74.125.189.18#38921: query (cache) 'ns1.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.144.171#38833: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.17#42428: query (cache) 'ns2.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.146.27#37899: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 193.203.82.66#39263: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 8.0.16.170#59723: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 80.169.197.66#32903: query (cache) 'dOmAin.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 134.58.60.1#47558: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.146.34#47387: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 8.0.16.8#59392: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.19#64395: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 217.72.163.3#42190: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 83.146.21.252#22020: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.146.116#57342: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 193.203.82.66#52020: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 8.0.16.72#64317: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 80.169.197.66#31989: query (cache) 'dOmAin.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.18#47436: query (cache) 'ns2.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.16#44005: query (cache) 'ns1.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 85.132.31.10#50379: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 94.241.128.3#60106: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 85.132.31.10#59118: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 212.95.135.78#27811: query (cache) 'domain.com/A/IN' denied /etc/resolv.conf ; generated by /sbin/dhclient-script nameserver 4.2.2.4 nameserver 8.8.4.4 Bind config: // generated by named-bootconf.pl options { directory "/var/named"; /* * If there is a firewall between you and nameservers you want * to talk to, you might need to uncomment the query-source * directive below. Previous versions of BIND always asked * questions using port 53, but BIND 8.1 uses an unprivileged * port by default. */ // query-source address * port 53; allow-transfer { none; }; allow-recursion { localnets; }; //listen-on-v6 { any; }; notify no; }; // // a caching only nameserver config // controls { inet 127.0.0.1 allow { localhost; } keys { rndckey; }; }; zone "." IN { type hint; file "named.ca"; }; zone "localhost" IN { type master; file "localhost.zone"; allow-update { none; }; }; zone "0.0.127.in-addr.arpa" IN { type master; file "named.local"; allow-update { none; }; };

    Read the article

  • How to stop windows resizing when the monitor display channel is turned off / switched to different source

    - by Heartspeace
    Have a new 6870 ati radeon adapter with its drivers set to 1080p 60hz resolution hooked up to a 2008 47" high end Samsung HDMI based TV. However, when the tv is turned to a different hdmi input -(when I come back into windows) somehow Windows decides to resize all the open apps to a lower resolution - including some of the side docked hidden pop-outs. When it resizes those though - it just sticked the pop-outs in the middle of the screen and all the resized windows from the open applications in the top left corner - all of them stacked on top of each other and resized to the smaller resolution. The things that seem to be ok after returning are the icons on the desktop, the taskbar, and the sidebar. Anyone have any knowledge of 1) how this happens 2) why it happens 3) how to stop it from resizing the applications and some of the docked pop-outs (they are not really resized after returning - they are just stuck in the middle of the screen approximately where they would be if the right or bottom sidebar should be if the screen was resized to that lower resolution). My hypothesis is that upon losing HDMI signal - that Windows is told by something (driver, or windows itself) that the resolution to be without a signal being present (noting that HDMI signals and handshakes are two way on HDMI devices. If it loses the signal or the tv is switched to another device - then the display adapter must figure that out and tell Windows or figures it out and designs randomly to change the display size). Any and all help is most appreciated. I asked AMD/ATI - but they said they don't know why or how this is happening. I was hoping that maybe this is THE place that the super users truly go to - those that develop display adapter drivers, or that dive deeply into these areas of windows. If there is better sites or just competing sites - please advise - noting I have already written AMD/ATI. HP Response / Additions 4/7/2011 It is really nice to get your reply Shinrai. (BTW is it proper etiquette on these forums to have a discussion?) Yet 'only one issue' - I am using a single display in this case - so Windows doesn't move application windows to another desktop. Windows (or something) decides to shrink the desktop it currently has and resize all windows to the maximum size of the desktop. As such I would be glad if Windows would just keep the current size of the one desktop that is in operation. I also know that this does NOT happen on monitors connected with DVI. There I have had one and two monitors setup and it doesn't resize those screens at all when disconnecting monitors, turning them off, whatever... they stay solid - everything in place - to such an extent that if you forgot the other monitor is off - you will have troubles finding some windows without using one of the control app utilities. So if I could even get the HDMI handling by Windows (or the display driver) ( 1] which is doing this anyway the display driver or Windows - and 2] where is that other resolution size (1024x768) coming from - its not the smallest and its not the largest?) to be having like DVI - Life would be golden (for this aspect anyway). ** found others with same problem in this thread: http://hardforum.com/showthread.php?t=1507324 Thanks, HP

    Read the article

  • Configuring a PIX 506e for Asterisk

    - by orthogonal3
    Hi all! I'm having problems configuring a old Cisco PIX running 6.3 and wondered if anyone can lend a hand? Simply put I have a PIX 506e that I want to put in my VoIP data path. I can't update it and getting a compat version of Java for that version of PIX is tough so I can't log onto the web interface. The PIX straddles two networks..... 192.168.5.0 on the inside, ...50.0 on the outside both net masks are 255.255.255.0 I have a local Asterisk server cluster with a single service IP (<local asterisk>) SIP is on UDP 5060 and RTP (for the voip data) is on UDP 18000-18999 I know thats a big range but hey may as well. I need the 192.168.5.0 net to have web and ftp access for updates and the like. DHCP, DNS and NTP is already provided on that network so I don't need external DNS access. So I think I want the following rules: SIP or RTP from <my itsp> arriving at <outside voip ip> NATed to <local asterisk> SIP or RTP able to do the reverse route (should be covered by high sec - low sec??) HTTP and FTP access outbound for software update for the servers etc I have the following config at the minute - and I think I'm almost there (I hope)... interface ethernet0 auto interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password wouldyouliketobeapeppertoo encrypted passwd wouldyouliketobeapeppertoo encrypted hostname afirewall domain-name adomain fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 access-list acl_ping permit icmp any any access-list voip permit ip host <my itsp> host <local asterisk> mtu outside 1500 mtu inside 1500 ip address outside <outside pix ip> 255.255.255.0 ip address inside <inside pix ip> 255.255.255.0 arp timeout 14400 global (outside) 1 <outside generic ip> nat (inside) 1 192.168.5.0 255.255.255.0 0 0 static (inside,outside) <outside voip ip> <local asterisk> netmask 255.255.255.255 0 0 static (outside,inside) <local asterisk> <outside voip ip> netmask 255.255.255.255 0 0 access-group acl_ping in interface outside access-group acl_ping in interface inside route outside 0.0.0.0 0.0.0.0 <my next hop router> 1 route outside <my itsp> 255.255.255.255 <my next hop router> 1 I think I just need a hand with the access-lists and NAT/static rules. Would anyone be able to help as I've RTFM'd the Cisco docs a few times and they're heavy. Wishing I'd completed my CCNA now! Thanks all for any help, Phil

    Read the article

  • Choice of an OS for a home ZFS NAS

    - by OlafM
    I am preparing a home NAS with an old Athlon 64 X2 3800+, 4 GB ECC RAM, Asus M2V MX motherboard, and a single 3 TB WDC Green (another one as mirror may be installed in the future). It's the cheapest solution I found that includes ECC memory and the higher energy consumption is offset by the lower (zero) cost of acquisition. The system will be used for: music storage and stream to other desktop computers; storage of the scanned dia slides (3-4k slides, 180 MB TIFF each one plus reduced quality JPEG version); stream of these photos to a local iPad 2 (maybe Plex App? not yet sure); (one additional) remote backup via rsync/ssh or ZFS send/receive. It will be controlled via remote ssh, maybe VNC, no monitor attached. Absolute requirement is a reliable ZFS solution, plus the ability to easily install packets/software/virtual machines and to update remotely (I will be the admin and I don't live near the NAS). I have mainly three options: NAS4free/FreeNAS OpenIndiana Solaris Express 11 (yeah yeah I know the license requirements, I will write a perl script on it to count it as development machine). Problems: NAS4free/FreeNAS (I tested only NAS4free) required embedded installation for remote upgrading, but full install for easy addition of software packets. Since I need at least AirVideo Server (linux/win) and Plex App (win/linux) to stream the photos and some videos to iPad (they both require virtualbox), but I cannot be there to install updates, NAS4free/FreeNAS are excluded. http://www.nas4free.org/general_information.html explains the issue: embedded can be remotely updated, full cannot. Solaris has also another advantage: Crashplan client supports Solaris and I'm already using it for other backups. I would like to leave the option open, even if I will be doing backups probably through zfs send/receive. NexentaStor was left out because zfs send/receive are not included in the free version. The question is now Solaris 11 Express over OpenIndiana. To ease the management, I will be using http://www.napp-it.org Which one would you suggest and why? I found lots of informations and it's difficult for me to decide. I think (from the napp-it manual) that Solaris has some additional options for SMB shares, but are they really needed at home? I think I won't even use ACLs, since normal unix-style permissions are enough. OpenIndiana has maybe more frequent updates (Solaris offers only security updates between releases), but again, do I need them? I don't think so. Moreover, this is a NAS that has to work and nothing else, I cannot risk having problems that require me to access the server. Isn't OpenIndiana a bit more... cutting edge (in the Solaris world)? I'm just asking, no need to focus on this for the answer :-) I would limit myself to these two options (SE11.1/OI) also because I will be making a NAS for me in the future (where high performances with Mac shares are also required) and Solaris has kernel support for AFP. I will use this server to gather experience as well. After this long question, thanks in advance! If you need additional info, let me know and I will update this post. UPDATES Given the first answers, I will strongly suggest the person paying the hardware to insert a second HD. Better 2x2TB than 1x3TB (3 TB is oversized anyway). I was trying to keep the initial costs down to spread them over a longer period, but better having something good from the beginning.

    Read the article

  • Specifying a Postfix Instance to send outbound email

    - by Catherine Jefferson
    I have a CentOS 6.5 server running Postfix 2.6x (the default distribution) with five public IPv4 IPs bound to it. Each IP has DNS and rDNS set separately. Each uses a different hostname at a different domain. I have five Postfix instances, one bound to each IP, like this example: 192.168.34.104 red.example.com /etc/postfix 192.168.36.48 green.example.net /etc/postfix-green 192.168.36.49 pink.example.org /etc/postfix-pink 192.168.36.50 orange.example.info /etc/postfix-orange 192.168.36.51 blue.example.us /etc/postfix-blue I've tested each IP by telneting to port 25. Postfix answers and banners properly with the correct hostname. Email is received on all of these instances with no problems and is routed to the correct place. This setup, minus the final instance, has existed for a couple of years and works. I never bothered to set up outbound email to go through any but the main instance, however; there was no need. Now I need to send email from blue.example.us that actually leaves from that interface and IP, such that the Received headers show blue.example.us as the sending mailhost, so that SPF and DKIM validate, etc etc. The email that will be sent from blue.example.com is a feedback loop sent by a single shell account on the server (account5), an account that is dedicated to sending this email. The account receives the feedback loop emails from servers on other networks, saves the bodies of those emails, and then generates a new outbound email header, appends the saved body, and sends the email. It's sending by piping each email to sendmail -oi -t. We're doing it this way to mask the identities of the initial servers. The procmail script that processes these emails works correctly. However, I cannot configure this account to send email through the proper Postfix instance/IP/interface. The exact same account and script sends email through the main Postfix instance /etc/postfix without any issues. When I change MAIL_CONFIG to point to /etc/postfix-blue in either .bash_profile or the Procmail script that handles this email, though, I get this error: sendmail: fatal: User account5(###) is not allowed to submit mail I've read the manuals on Postfix.org, searched Google, and tried the suggestions in three previous answers here on ServerFault.com: Postfix - specify interface to deliver outbound mail on Postfix user is not allowed to submit mail Postfix rejects php mails I have been careful to stop and restart Postfix after each configuration change, and tested the results. Nothing has worked. The main postfix instance happily accepts outbound email from account5. The postfix-blue instance continues to reject email from account5 with the sendmail error above. As tempting as it is to blame machine hostility, I know that I must be missing something or doing something wrong. Does anybody have any suggestions as to what it might be? Please feel free to ask for further information about my setup if you need it. =-=-=-=-=-=-=-=-=-= At the request of the responder, here are main.cf and master.cf for a) the main postfix instance ("red.example.com") and b) the FBL instance ("blue.example.us") [NOTE: All parameters not specified below were left at the default Postfix 2.6 settings] MAIN: master.cf smtp inet n - n - - smtpd main.cf myhostname = red.example.com mydomain = example.com inet_interfaces = $myhostname, localhost inet_protocols = all lmtp_host_lookup = native smtp_host_lookup = native ignore_mx_lookup_error = yes mydestination = $myhostname, localhost.$mydomain, localhost local_recipient_maps = mynetworks = 192.168.34.104/32 relay_domains = example.com, example.info, example.net, example.org, example.us relayhost = [192.168.34.102] # Separate physical server, main mailserver. relay_recipient_maps = hash:/etc/postfix/relay_recipients alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases smtpd_banner = $myhostname ESMTP $mail_name multi_instance_wrapper = ${command_directory}/postmulti -p -- multi_instance_enable = yes multi_instance_directories = /etc/postfix-green /etc/postfix-pink /etc/postfix-orange /etc/postfix-blue FBL: master.cf 184.173.119.103:25 inet n - n - - smtpd main.cf myhostname = blue.example.us mydomain = blue.example.us <= Deliberately set to subdomain only. myorigin = $mydomain inet_interfaces = $myhostname lmtp_host_lookup = native smtp_host_lookup = native ignore_mx_lookup_error = yes mydestination = $myhostname local_recipient_maps = unix:passwd.byname $alias_maps $virtual_alias_maps mynetworks = 192.168.36.51/32, 192.168.35.20/31 <= Second IP is backup MX servers relay_domains = $mydestination recipient_canonical_maps = hash:/etc/postfix-blue/canonical virtual_alias_maps = hash:/etc/postfix-fbl/virtual alias_maps = hash:/etc/aliases, hash:/etc/postfix-blue/canonical alias_maps = hash:/etc/aliases, hash:/etc/postfix-blue/canonical mailbox_command = /usr/bin/procmail -a "$EXTENSION" DEFAULT=$HOME/Mail/ MAILDIR=$HOME/Mail smtpd_banner = $myhostname ESMTP $mail_name authorized_submit_users = multi_instance_name = postfix-blue multi_instance_enable = yes

    Read the article

  • Ubuntu Server, 2 Ethernet Devices, Same Gateway - Want to force internet traffic through 1 device (or at least allow it to work!)

    - by Chris Drumgoole
    I have a Ubuntu 10.04 Server with 2 ethernet devices, eth0 and eth1. eth0 has a static IP of 192.168.1.210 eth1 has a static IP if 192.168.1.211 The DHCP server (which also serves as the internet gateway) sits at 192.168.1.1. The issue I have right now is when I have both plugged in, I can connect to both IPs over SSH internally, but I can't connect to the internet from the server. If I unplug one of the devices (e.g. eth1), then it works, no problem. (Also, I get the same result when I run sudo ifconfig eth1 down). Question, how can I configure it so that I can have both devices eth0 and eth1 play nice on the same network, but allow internet access as well? (I am open to either enforcing all inet traffic going through a single device, or through both, I'm flexible). From my google searching, it seems I could have a unique (or not popular) problem, so haven't been able to find a solution. Is this something that people generally don't do? The reason I want to make use of both ethernet devices is because I want to run different local traffic services on on both to split the load, so to speak... Thanks in advance. UPDATE Contents of /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The secondary network interface #auto eth1 #iface eth1 inet dhcp (Note: above, I commented out the last 2 lines because I thought that was causing issues... but it didn't solve it) netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 192.168.1.1 255.255.255.0 UG 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 UPDATE 2 I made a change to the /etc/network/interfaces file as suggested by Kevin. Before I display the file contents and the route table, when I am logged into the server (through SSH), I can not ping an external server, so this is the same issue I was experiencing that led to me posting this question. I ran a /etc/init.d/networking restart after making the file changes. Contents of /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp address 192.168.1.210 netmask 255.255.255.0 gateway 192.168.1.1 # The secondary network interface auto eth1 iface eth1 inet dhcp address 192.168.1.211 netmask 255.255.255.0 ifconfig output eth0 Link encap:Ethernet HWaddr 78:2b:cb:4c:02:7f inet addr:192.168.1.210 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::7a2b:cbff:fe4c:27f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6397 errors:0 dropped:0 overruns:0 frame:0 TX packets:683 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:538881 (538.8 KB) TX bytes:85597 (85.5 KB) Interrupt:36 Memory:da000000-da012800 eth1 Link encap:Ethernet HWaddr 78:2b:cb:4c:02:80 inet addr:192.168.1.211 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::7a2b:cbff:fe4c:280/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5799 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:484436 (484.4 KB) TX bytes:1184 (1.1 KB) Interrupt:48 Memory:dc000000-dc012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:635 errors:0 dropped:0 overruns:0 frame:0 TX packets:635 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:38154 (38.1 KB) TX bytes:38154 (38.1 KB) netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0

    Read the article

  • Optimise Apache for EC2 micro instance

    - by Shiyu Sekam
    I'm running apache2 on a EC2 micro instance with ~600 mb RAM. The instance was running for almost a year without problems, but in the last weeks it just keeps crashing, because the server reached MaxClients. The server basically runs few websites, one wordpress blog(not often used), company website(most used) and 2 small sites, which are just internal. The database for the blog runs on RDS, so there's no Mysql running on this web server. When I came to the company, the server already was setup and is running apache + mod_php + prefork. We want to migrate that in the future to a nginx + php-fpm, but it still needs further testing. So for now I have to stick with the old setup. I also use CloudFlare DDOS protection in front of the server, because it was attacked a couple of the times in the last weeks. My company don't want to pay money for a better web server at this point, so I have to stick with the micro instance also. Additionally the code for the website we run is really bad and slow and sometimes a single page load can take up to 15 seconds. The whole website is dynamic and written in PHP, so caching isn't really an option here. It's a customized search for users. I've already turned off KeepAlive, which improved the performance a little bit. My prefork config looks like the following: StartServers 2 MinSpareServers 2 MaxSpareServers 5 ServerLimit 10 MaxClients 10 MaxRequestsPerChild 100 The server just becomes unresponsive after a while running and I've run the following command to see how many connections there are: netstat | grep http | wc -l 75 Trying to restart apache helps for a short moment, but after that a while the apache process(es) become unresponsive again. I've the following modules enabled(output of apache2ctl -M) Loaded Modules: core_module (static) log_config_module (static) logio_module (static) version_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) authz_host_module (shared) deflate_module (shared) dir_module (shared) expires_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) rewrite_module (shared) setenvif_module (shared) ssl_module (shared) status_module (shared) Syntax OK apache2.conf # Security ServerTokens OS ServerSignature On TraceEnable On ServerName "web.example.com" ServerRoot "/etc/apache2" PidFile ${APACHE_PID_FILE} Timeout 30 KeepAlive off User www-data Group www-data AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> <Directory /> Options FollowSymLinks AllowOverride None </Directory> DefaultType none HostnameLookups Off ErrorLog /var/log/apache2/error.log LogLevel warn EnableSendfile On #Listen 80 Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf Include /etc/apache2/ports.conf LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent Include /etc/apache2/conf.d/*.conf Include /etc/apache2/sites-enabled/*.conf Vhost of main site <VirtualHost *:80> ServerName www.example.com ## Vhost docroot DocumentRoot /srv/www/jenkins/Web ## Directories, there should at least be a declaration for /srv/www/jenkins/Web <Directory /srv/www/jenkins/Web> AllowOverride All Order allow,deny Allow from all </Directory> ## Load additional static includes ## Logging ErrorLog /var/log/apache2/www.example.com.error.log LogLevel warn ServerSignature Off CustomLog /var/log/apache2/www.example.com.access.log combined ## Rewrite rules RewriteEngine On RewriteCond %{HTTP_HOST} !^www.example.com$ RewriteRule ^.*$ http://www.example.com%{REQUEST_URI} [R=301,L] ## Server aliases ServerAlias www.example.invalid ServerAlias example.com ## Custom fragment <Location /srv/www/jenkins/Web/library> Order Deny,Allow Deny from all </Location> <Files ~ "^\.(.+)"> Order deny,allow deny from all </Files> </VirtualHost>

    Read the article

  • Mod_Rewrite w Apache mod_jrun22.so & ColdFusion 9 on cPanel

    - by Eddie B
    How can I utilize mod_rewrite at either the httpd.conf level or per-directory level when mod_jrun22 seems to have short-stopped the rewrite process for ColdFusion pages? I have a ColdFusion 9 based site running on Centos 5.8 w cPanel. cPanel uses EasyApache 3 to manage virtual host containers and as such the conf for mod_jrun22.so, /usr/local/apache/conf/includes/pre_main_global.conf, is loaded prior to the main httpd.conf with the domain specific rules for the container. My assertion is that .cfm pages are failing to be rewritten due to the mod_jk22.so module having priority in the directive chain. To note, I also have a WordPress blog in the site where the rewrites appear to be working fine. For example the following code to remove the index file works fine for php and fails with cfm ... .htaccess under /blog/ : This works Options -Indexes -Multiviews <IfModule mod_rewrite.c> RewriteEngine On RewriteBase /blog/ RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /blog/index.php [L] </IfModule> .htaccess under / : This does not work as expected. Apache serves the page. ASSERT: This would redirect to domain.com/ without index.cfm Options -Indexes -Multiviews <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.cfm$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.cfm [L] </IfModule> .htaccess under / : This works I'm presuming this is working because the redirect is to another .cfm page and a 404 handler in Application.cfc ... Options -Indexes -Multiviews <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^.*\.cfm$ - [L] RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{ENV:REDIRECT_STATUS} =404 RewriteRule . /404.cfm$ [L] </IfModule> I've attempted numerous different methods to rewrite .cfm urls ... Adding [PT], [L], [R], [NS], Moving the script to Directory blocks under httpd.conf --- all with the same results ... either the rewrite doesn't work or Apache crashes in an endless loop ... Any help would be greatly appreciated. Below is a single-visit rewrite log snippet for a request to /index.cfm ... the pass-through is taking effect before the rewrite ... cat rewrite_dump_mod | grep index.cfm [perdir /home/foo/public_html/] strip per-dir prefix: /home/foo/public_html/index.cfm -> index.cfm [perdir /home/foo/public_html/] applying pattern '^.*\.cfm$' to uri 'index.cfm' [perdir /home/foo/public_html/] pass through /home/foo/public_html/index.cfm [perdir /home/foo/public_html/] strip per-dir prefix: /home/foo/public_html/index.cfm -> index.cfm [perdir /home/foo/public_html/] applying pattern '^.*\.cfm$' to uri 'index.cfm' [perdir /home/foo/public_html/] pass through /home/foo/public_html/index.cfm * UPDATE * I've managed to figure this out ... it took a while ... Options -Indexes -Multiviews +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] RewriteCond %{THE_REQUEST} ^.*/index\.cfm RewriteRule ^(.*)index.cfm http://%{HTTP_HOST}/$1 [R=301,L] </IfModule>

    Read the article

  • mySQL Optimization Suggestions

    - by Brian Schroeter
    I'm trying to optimize our mySQL configuration for our large Magento website. The reason I believe that mySQL needs to be configured further is because New Relic has shown that our SELECT queries are taking a long time (20,000+ ms) in some categories. I ran MySQLTuner 1.3.0 and got the following results... (Disclaimer: I restarted mySQL earlier after tweaking some settings, and so the results here may not be 100% accurate): >> MySQLTuner 1.3.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering [OK] Currently running supported MySQL version 5.5.37-35.0 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +ARCHIVE +BLACKHOLE +CSV -FEDERATED +InnoDB +MRG_MYISAM [--] Data in MyISAM tables: 7G (Tables: 332) [--] Data in InnoDB tables: 213G (Tables: 8714) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [--] Data in MEMORY tables: 0B (Tables: 353) [!!] Total fragmented tables: 5492 -------- Security Recommendations ------------------------------------------- [!!] User '@host5.server1.autopartsnetwork.com' has no password set. [!!] User '@localhost' has no password set. [!!] User 'root@%' has no password set. -------- Performance Metrics ------------------------------------------------- [--] Up for: 5h 3m 4s (5M q [317.443 qps], 42K conn, TX: 18B, RX: 2B) [--] Reads / Writes: 95% / 5% [--] Total buffers: 35.5G global + 184.5M per thread (1024 max threads) [!!] Maximum possible memory usage: 220.0G (174% of installed RAM) [OK] Slow queries: 0% (6K/5M) [OK] Highest usage of available connections: 5% (61/1024) [OK] Key buffer size / total MyISAM indexes: 512.0M/3.1G [OK] Key buffer hit rate: 100.0% (102M cached / 45K reads) [OK] Query cache efficiency: 66.9% (3M cached / 5M selects) [!!] Query cache prunes per day: 3486361 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 812K sorts) [!!] Joins performed without indexes: 1328 [OK] Temporary tables created on disk: 11% (126K on disk / 1M total) [OK] Thread cache hit rate: 99% (61 created / 42K connections) [!!] Table cache hit rate: 19% (9K open / 49K opened) [OK] Open file limit used: 2% (712/25K) [OK] Table locks acquired immediately: 100% (5M immediate / 5M locks) [!!] InnoDB buffer pool / data size: 32.0G/213.4G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increasing the query_cache size over 128M may reduce performance Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 512M) [see warning above] join_buffer_size (> 128.0M, or always use indexes with joins) table_cache (> 12288) innodb_buffer_pool_size (>= 213G) My my.cnf configuration is as follows... [client] port = 3306 [mysqld_safe] nice = 0 [mysqld] tmpdir = /var/lib/mysql/tmp user = mysql port = 3306 skip-external-locking character-set-server = utf8 collation-server = utf8_general_ci event_scheduler = 0 key_buffer = 512M max_allowed_packet = 64M thread_stack = 512K thread_cache_size = 512 sort_buffer_size = 24M read_buffer_size = 8M read_rnd_buffer_size = 24M join_buffer_size = 128M # for some nightly processes client sessions set the join buffer to 8 GB auto-increment-increment = 1 auto-increment-offset = 1 myisam-recover = BACKUP max_connections = 1024 # max connect errors artificially high to support behaviors of NetScaler monitors max_connect_errors = 999999 concurrent_insert = 2 connect_timeout = 5 wait_timeout = 180 net_read_timeout = 120 net_write_timeout = 120 back_log = 128 # this table_open_cache might be too low because of MySQL bugs #16244691 and #65384) table_open_cache = 12288 tmp_table_size = 512M max_heap_table_size = 512M bulk_insert_buffer_size = 512M open-files-limit = 8192 open-files = 1024 query_cache_type = 1 # large query limit supports SOAP and REST API integrations query_cache_limit = 4M # larger than 512 MB query cache size is problematic; this is typically ~60% full query_cache_size = 512M # set to true on read slaves read_only = false slow_query_log_file = /var/log/mysql/slow.log slow_query_log = 0 long_query_time = 0.2 expire_logs_days = 10 max_binlog_size = 1024M binlog_cache_size = 32K sync_binlog = 0 # SSD RAID10 technically has a write capacity of 10000 IOPS innodb_io_capacity = 400 innodb_file_per_table innodb_table_locks = true innodb_lock_wait_timeout = 30 # These servers have 80 CPU threads; match 1:1 innodb_thread_concurrency = 48 innodb_commit_concurrency = 2 innodb_support_xa = true innodb_buffer_pool_size = 32G innodb_file_per_table innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 2G skip-federated [mysqldump] quick quote-names single-transaction max_allowed_packet = 64M I have a monster of a server here to power our site because our catalog is very large (300,000 simple SKUs), and I'm just wondering if I'm missing anything that I can configure further. :-) Thanks!

    Read the article

  • How to use iptables to forward all data from an IP to a Virtual Machine

    - by jro
    OK, in an attempt to get some response, a TL;DR version. I know that the following command: iptables -A PREROUTING -t nat -i eth0 --dport 80 --source 1.1.1.1 -j REDIRECT --to-port 8080 ... will redirect all traffic from port 80 to port 8080. The problem is that I have to do this for every port that is to be redirected. To be future-proof, I want all ports for an IP to be redirected to a different (internal) IP, so that if one might decide to enable SSH, they can directly connect without worrying about iptables. What is needed to reliable forward all traffic from an external IP, to an internal IP, and vice versa? Extended version I've scoured the internet for this, but I never got a solid answer. What I have is one physical server (HOST), with several virtual machines (VM) that need traffic redirected to them. Just getting it to work with a single machine is enough for now. The VM's run under VirtualBox, and are set to use a host-only adapter (vboxnet0). Everything seems to work, but it is greatly lagging. Both the host (CentOS 5.6) and the guest (Ubuntu 10.04) machine are running Linux. What I did was the following: Configure the VM to have a static IP in the network of the vboxnet0 adapter. Add an IP alias to the host, registering to the dedicated (outside) IP. Setup iptables to allow traffic to come through (via sysctl). Configure iptables to DNAT and SNAT data from a given IP address to the internal address. iptables commands: sudo iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT sudo iptables -A POSTROUTING -t nat -j MASQUERADE iptables -t nat -I PREROUTING -d $OUT_IP -I eth0 -j DNAT --to-destination $IN_IP iptables -t nat -I POSTROUTING -s $IN_IP -o eth0 -j SNAT --to-source $OUT_IP Now the site works, but is really, really slow. I'm hoping I missed something simple, but I'm out of ideas for now. Some background info: before this, the site was working with basic port forwarding. E.g. port 80 was mapped to port 8080 using iptables. In VirtualBox (having the network adapter configured as NAT), a port forwarding the other way around made things work beautifully. The problem was twofold: first, multiple ports needed to be forwarded (for admin interfaces, https, ssh, etc). Second, it only allowed one IP address to use port 80. To resolve things, multiple external IP addresses are used for different (sub)domains. Likewise, the "VirtualBox" network will contain the virtual machines: DNS Ext. IP Adapter VM "VirtalBox" IP ------------------------------------------------------------------ a.example.com 1.1.1.1 eth0:1 vm_guest_1 192.168.56.1 b.example.com 2.2.2.2 eth0:2 vm_guest_2 192.168.56.2 c.example.com 3.3.3.3 eth0:3 vm_guest_3 192.168.56.3 And so on. Put simply, the goal is to channel all traffic from a.example.com to vm_guest_1 (of put differently, from 1.1.1.1 to 192.168.56.1). And achieve this with an acceptable speed :).

    Read the article

  • Windows 7, file properties - Is "date accessed" ALWAYS 100% accurate?

    - by Robert
    Hello, Here's the situation: I went on vacation for a couple of weeks, but before I left, I took the harddrive out of my computer and hid it in a different location. Upon coming back on Monday and putting the harddrive back in my computer, I right-clicked on different files to see their properties. Interestingly enough, several files had been accessed during the time I was gone! I right-clicked different files in various locations on the harddrive, and all of these suspect files had been accessed within a certain time range (Sunday, ?January ?09, ?2011, approximately ??between 6:52:16 PM - 7:16:25 PM). Some of them had been accessed at the exact same time--down to the very second. This makes me think that someone must have done a search on my harddrive for certain types of files and then copied all those files to some other medium. The Windows 7 installation on this harddrive is password protected, but NOT encrypted, so they could have easily put the harddrive into an enclosure/toaster to access it from a different computer. Of course I did not right-click every single file on my computer, but did so in different folders. For instance, one of the folders I went through has different types of files: .mp3, ,prproj, .3gp, .mpg, .wmv, .xmp, .txt with file-sizes ranging from 2 KB to 29.7 MB (there is also a sub-folder in this folder which contains only .jpg files); however, of all these different types of files in this folder and its subfolder, all of them had been accessed (including the .jpg files from the sub-folder) EXCEPT the .mp3 files (if it makes any difference, the .mp3 files in this folder range in size from 187 KB to 4881 KB). Additionally, this sub-folder which contained only .jpg files (48 .jpg files to be exact) was not accessed during this time--only the .jpg files within it were accessed-- (between 6:57:03 PM - 6:57:08 PM). I thought that perhaps this was some kind of Windows glitch that was displaying the wrong access date, but then I looked at the "date created" and "date modified" for all of these files in question, and their created/modified dates and times were spot on correct. My first thought was that someone put the harddrive into an enclosure/toaster and viewed the files; but then I realized that this was impossible because several of the files had been accessed at the same exact time down to the second. So this made me think that the only other way the "date accessed" could have changed would have been if someone copied the files. Is there any chance at all whatsoever that this is some kind of Windows glitch or something, or is it a fact that someone was indeed accessing my files (and if someone was accessing my files, am I right about the files in question having been copied)? Is there any other possibility for what could have happened? Do I need to use any kinds of forensics tools to further investigate this matter (and if so, which tools), or is there any other way in which I can be certain of what took place in that timeframe the day before I got back? Or is what I see with Windows 7 good enough (i.e. accurate and truthful)? Thanks in advance, and please let me know if any other details are required on my part.

    Read the article

  • The best dvd ripper software in 2014 review

    - by user328170
    The top 3 DVD Ripping Tools in 2014 Nowadays everyone may have several smart mobile devices, such as iphone, ipad air, ipad mini ,Samsung Galaxy and Sony Xperia. If you want to take your movies with your mobile devices, or sometimes just want to backup those classic physical discs on your notebook or workstation with high quality resolutions, you need a fast and stable software to rip them and convert them to the format you like. Fortunately, there are plenty of great software products designed to make the process easy and transform DVD to the files that are playable on any mobile device you choose. We have done a full review on dozens of products. Here are five of the best, based on our review. We test the software from its ripping speed, friendly use guide , reliability and ripping capability. The top one is still Winx DVD Ripper platinum. We've test its 6.1 version 2 years ago for its ability to quickly and easily rip DVDs and Blu-ray discs to high quality MKV files with a single click. It gave us deep impression in the test. This time we test it’s lastest 7.3.5 version. Besides easy use and speed, we test its capability to decrypt all kinds of discs with different protect method, for example, Disney X-project DRM , Sony ArccOS, RCE and region code. The result shows that winx dvd ripper platinum still maintain its advantages in all the area. Winx dvd ripper platinum is a more focused on DVD ripping software with the basic duty to rip and convert DVD. The color of UI is a modern technical sense. All the main functions are shown obviously while others specials are hidden for advanced users, making it more clear and convenient to make option. There are two company weisoft limited and Digiarty who can provide the software. Weisoft limited focus on USA, UK and Australia market. Digiarty focus on others. ripping speed ????? friendly use guide ????? reliability ????? ripping capability ????? The second one DVDFab DVDFab is also very robust during ripping dics. It can also decrypt most of the dics in the market. The shortage it still friendly use and speed. We'd note that the app is frequently updated to cut through the copy protection on even the latest DVDs and Blu-ray discs . The app is shareware, meaning most features are free, including decrypting and ripping to your hard drive. Many of you note that you use another app for compression and authoring, but many of you say they hey, storage is cheap, and the rips from DVDFab are easy, one-click, and work. ripping speed ??? friendly use guide ???? reliability ????? ripping capability ????? The Third one is Handbrake Handbrake is our favorite video encoder for a reason: it's simple, easy to use, easy to install, and offers a lots of options to get the high quality file as a result. If you're scared by them, you don't even have to use them—the app will compensate for you and pick some settings it thinks you'll like based on your destination device. So many of you like Handbrake that many of you use it in conjunction with another app (like VLC, which makes ripping easy)—you'll let another app do the rip and crack the DRM on your discs, and then process the file through Handbrake for encoding. The app is fast, can make the most of multi-core processors to speed up the process, and is completely open source. ripping speed ??? friendly use guide ???? reliability ???? ripping capability ????

    Read the article

  • C code won't compile

    - by cc
    Please help me to understand why the following code will not compile: #include <stdio.h> //#include <iostream> //using namespace std; int main(void){ int i,k,x,y,run,e,r,s,m,count=0; char numbers[19][19]; for(i=0;i<19;i++){ for (k=0;k<19;k++){ numbers[i][k]='.'; } } void drawB(){ printf(" 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 \n"); printf ("0 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[0][0],numbers[0][1],numbers[0][2],numbers[0][3],numbers[0][4], numbers[0][5],numbers[0][6],numbers[0][7],numbers[0][8],numbers[0][9], numbers[0][10],numbers[1][11],numbers[1][12],numbers[1][13],numbers[0][14] ,numbers[0][15],numbers[0][16],numbers[0][17],numbers[0][18]); printf ("1 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[1][0],numbers[1][1],numbers[1][2],numbers[1][3],numbers[1][4], numbers[1][5],numbers[1][6],numbers[1][7],numbers[1][8],numbers[1][9], numbers[1][10],numbers[1][11],numbers[1][12],numbers[1][13],numbers[1][14] ,numbers[1][15],numbers[1][16],numbers[1][17],numbers[1][18]); printf ("2 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" numbers[2][0],numbers[2][1],numbers[2][2],numbers[2][3],numbers[2][4], numbers[2][5],numbers[2][6],numbers[2][7],numbers[2][8],numbers[2][9], numbers[2][10],numbers[2][11],numbers[2][12],numbers[2][13],numbers[2][14] ,numbers[2][15],numbers[2][16],numbers[2][17],numbers[2][18]); printf ("3 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[3][0],numbers[3][1],numbers[3][2],numbers[3][3],numbers[3][4], numbers[3][5],numbers[3][6],numbers[3][7],numbers[3][8],numbers[3][9], numbers[3][10],numbers[3][11],numbers[3][12],numbers[3][13],numbers[3][14] ,numbers[3][15],numbers[3][16],numbers[3][17],numbers[3][18]); printf ("4 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[4][0],numbers[4][1],numbers[4][2],numbers[4][3],numbers[4][4], numbers[4][5],numbers[4][6],numbers[4][7],numbers[4][8],numbers[4][9], numbers[4][10],numbers[4][11],numbers[4][12],numbers[4][13],numbers[4][14] ,numbers[4][15],numbers[4][16],numbers[4][17],numbers[4][18]); printf ("5 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[5][0],numbers[5][1],numbers[5][2],numbers[5][3],numbers[5][4], numbers[5][5],numbers[5][6],numbers[5][7],numbers[5][8],numbers[5][9], numbers[5][10],numbers[5][11],numbers[5][12],numbers[5][13],numbers[5][14] ,numbers[5][15],numbers[5][16],numbers[5][17],numbers[5][18]); printf ("6 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[6][0],numbers[6][1],numbers[6][2],numbers[6][3],numbers[6][4], numbers[6][5],numbers[6][6],numbers[6][7],numbers[6][8],numbers[6][9], numbers[6][10],numbers[6][11],numbers[6][12],numbers[6][13],numbers[6][14] ,numbers[6][15],numbers[6][16],numbers[6][17],numbers[6][18]); printf ("7 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[7][0],numbers[7][1],numbers[7][2],numbers[7][3],numbers[7][4], numbers[7][5],numbers[7][6],numbers[7][7],numbers[7][8],numbers[7][9], numbers[7][10],numbers[7][11],numbers[7][12],numbers[7][13],numbers[7][14] ,numbers[7][15],numbers[7][16],numbers[7][17],numbers[7][18]); printf ("8 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[8][0],numbers[8][1],numbers[8][2],numbers[8][3],numbers[8][4], numbers[8][5],numbers[8][6],numbers[8][7],numbers[8][8],numbers[8][9], numbers[8][10],numbers[8][11],numbers[8][12],numbers[8][13],numbers[8][14] ,numbers[8][15],numbers[8][16],numbers[8][17],numbers[8][18]); printf ("9 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[9][0],numbers[9][1],numbers[9][2],numbers[9][3],numbers[9][4], numbers[9][5],numbers[9][6],numbers[9][7],numbers[9][8],numbers[9][9], numbers[9][10],numbers[9][11],numbers[9][12],numbers[9][13],numbers[9][14] ,numbers[9][15],numbers[9][16],numbers[9][17],numbers[9][18]); printf ("0 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[10][0],numbers[10][1],numbers[10][2],numbers[10][3],numbers[10][4], numbers[10][5],numbers[10][6],numbers[10][7],numbers[10][8],numbers[10][9], numbers[10][10],numbers[10][11],numbers[10][12],numbers[10][13],numbers[10][14] ,numbers[10][15],numbers[10][16],numbers[10][17],numbers[10][18]); printf ("1 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[11][0],numbers[11][1],numbers[11][2],numbers[11][3],numbers[11][4], numbers[11][5],numbers[11][6],numbers[11][7],numbers[11][8],numbers[11][9], numbers[11][10],numbers[11][11],numbers[11][12],numbers[11][13],numbers[11][14] ,numbers[11][15],numbers[11][16],numbers[11][17],numbers[11][18]); printf ("2 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[12][0],numbers[12][1],numbers[12][2],numbers[12][3],numbers[12][4], numbers[12][5],numbers[12][6],numbers[12][7],numbers[12][8],numbers[12][9], numbers[12][10],numbers[12][11],numbers[12][12],numbers[12][13],numbers[12][14] ,numbers[12][15],numbers[12][16],numbers[12][17],numbers[12][18]); printf ("3 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[13][0],numbers[13][1],numbers[13][2],numbers[13][3],numbers[13][4], numbers[13][5],numbers[13][6],numbers[13][7],numbers[13][8],numbers[13][9], numbers[13][10],numbers[13][11],numbers[13][12],numbers[13][13],numbers[13][14] ,numbers[13][15],numbers[13][16],numbers[13][17],numbers[13][18]); printf ("4 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[14][0],numbers[14][1],numbers[14][2],numbers[14][3],numbers[14][4], numbers[14][5],numbers[14][6],numbers[14][7],numbers[14][8],numbers[14][9], numbers[14][10],numbers[14][11],numbers[14][12],numbers[14][13],numbers[14][14] ,numbers[14][15],numbers[14][16],numbers[14][17],numbers[14][18]); printf ("5 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[15][0],numbers[15][1],numbers[15][2],numbers[15][3],numbers[15][4], numbers[15][5],numbers[15][6],numbers[15][7],numbers[15][8],numbers[15][9], numbers[15][10],numbers[15][11],numbers[15][12],numbers[15][13],numbers[15][14] ,numbers[15][15],numbers[15][16],numbers[15][17],numbers[15][18]); printf ("6 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[16][0],numbers[16][1],numbers[16][2],numbers[16][3],numbers[16][4], numbers[16][5],numbers[16][6],numbers[16][7],numbers[16][8],numbers[16][9], numbers[16][10],numbers[16][11],numbers[16][12],numbers[16][13],numbers[16][14] ,numbers[16][15],numbers[16][16],numbers[16][17],numbers[16][18]); printf ("7 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[17][0],numbers[17][1],numbers[17][2],numbers[17][3],numbers[17][4], numbers[17][5],numbers[17][6],numbers[17][7],numbers[17][8],numbers[17][9], numbers[17][10],numbers[17][11],numbers[17][12],numbers[17][13],numbers[17][14] ,numbers[17][15],numbers[17][16],numbers[17][17],numbers[17][18]); printf ("8 %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c %c \n\n" ,numbers[18][0],numbers[18][1],numbers[18][2],numbers[18][3],numbers[18][4], numbers[18][5],numbers[18][6],numbers[18][7],numbers[18][8],numbers[18][9], numbers[18][10],numbers[18][11],numbers[18][12],numbers[18][13],numbers[18][14] ,numbers[18][15],numbers[18][16],numbers[18][17],numbers[18][18]); } void checkSurrounded (int x,int y){ //numbers [x-1,y-1 ] , numbers [x-1,y ] , numbers [x-1,y+1 ] //numbers [x,y-1 ] , numbers [x,y ] , numbers [x,y+1 ] //numbers [x+1,y-1, ] , numbers [x+1,y ] , numbers [x+1,y+1 ] if(numbers[x][y]=='A'){ if((numbers[x-1][y-1]=='B') && (numbers[x-1][y]=='B') && (numbers[x-1][y+1]=='B') && (numbers[x][y-1]=='B') && (numbers[x][y+1]=='B') && (numbers[x+1][y-1]=='B') && (numbers[x+1][y]=='B')){ numbers[x][y]='B';} } if(numbers[x][y]=='B'){ if((numbers[x-1][y-1]=='A') && (numbers[x-1][y]=='A') && (numbers[x-1][y+1]=='A') && (numbers[x][y-1]=='A') && (numbers[x][y+1]=='A') && (numbers[x+1][y-1]=='A') && (numbers[x+1][y]=='A')){ numbers[x][y]='A'; } } } /** void checkArea(){ //detect enemy stone //store in array //find adjacent enemy stones // store the enemy stones in the array //keep on doing this until there are no more enemy stones that are adjacent for (s=0;s<19;s++) { for (m=0;m<19;m++) { if (numbers[s][m]=='A'){ count++; } } } }//end fn void checkAdjacent(int x, int y){ if (numbers [x][y]=='A'){ if((numbers[x][y-1]=='B' && numbers [x-1][y]=='B' && numbers[x][y+1]=='B' && numbers[x+1][y]=='B')){ } } } void getUserInput(){ int run=1; while(run){ printf("Enter x coordinate\n"); scanf("%d",&x); printf("Enter y coordinate\n"); scanf("%d",&y); if((x>18 || y>18 || x<0 || y<0) && !( numbers[x][y]=='.' )){ printf("invalid imput\n"); } else{ numbers[x][y]='B'; run=0; drawB(); } } } */ void getCupInput(){ //go through borad //starting from [0][0] //stop at first player stone //save as target x and target y //surround target x and target y //if already surrounded //start looking in borad again from last position //at end of board reset to [0][0] for(s=0;s<19;s++) { for(m=0;m<19;m++) { if (numbers[s][m]==0){ count++; } } } x=x-2; y=y+2; numbers[x][y]='A'; drawB(); } while(1){ //getUserInput(); getCupInput(); } system("pause"); return 0; }

    Read the article

  • Problem with my whiteboard application

    - by swift
    I have to develop a whiteboard application in which both the local user and the remote user should be able to draw simultaneously, is this possible? If possible then any logic? I have already developed a code but in which i am not able to do this, when the remote user starts drawing the shape which i am drawing is being replaced by his shape and co-ordinates. This problem is only when both draw simultaneously. any idea guys? Here is my code class Paper extends JPanel implements MouseListener,MouseMotionListener,ActionListener { static BufferedImage image; int bpressed; Color color; Point start; Point end; Point mp; Button elipse=new Button("elipse"); Button rectangle=new Button("rect"); Button line=new Button("line"); Button empty=new Button(""); JButton save=new JButton("Save"); JButton erase=new JButton("Erase"); String selected; int ex,ey;//eraser DatagramSocket dataSocket; JButton button = new JButton("test"); Client client; Point p=new Point(); int w,h; public Paper(DatagramSocket dataSocket) { this.dataSocket=dataSocket; client=new Client(dataSocket); System.out.println("paper"); setBackground(Color.white); addMouseListener(this); addMouseMotionListener(this); color = Color.black; setBorder(BorderFactory.createLineBorder(Color.black)); //save.setPreferredSize(new Dimension(100,20)); save.setMaximumSize(new Dimension(75,27)); erase.setMaximumSize(new Dimension(75,27)); } public void paintComponent(Graphics g) { try { g.drawImage(image, 0, 0, this); Graphics2D g2 = (Graphics2D)g; g2.setPaint(Color.black); if(selected==("elipse")) g2.drawOval(start.x, start.y,(end.x-start.x),(end.y-start.y)); else if(selected==("rect")) g2.drawRect(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected==("line")) g2.drawLine(start.x,start.y,end.x,end.y); } catch(Exception e) {} } //Function to draw the shape on image public void draw() { Graphics2D g2 = image.createGraphics(); g2.setPaint(color); if(selected=="line") g2.drawLine(start.x, start.y, end.x, end.y); if(selected=="elipse") g2.drawOval(start.x, start.y, (end.x-start.x),(end.y-start.y)); if(selected=="rect") g2.drawRect(start.x, start.y, (end.x-start.x),(end.y-start.y)); repaint(); g2.dispose(); start=null; } //To add the point to the board which is broadcasted by the server public synchronized void addPoint(Point ps,String varname,String shape,String event) { try { if(end==null) end = new Point(); if(start==null) start = new Point(); if(shape.equals("elipse")) selected="elipse"; else if(shape.equals("line")) selected="line"; else if(shape.equals("rect")) selected="rect"; else if(shape.equals("erase")) { selected="erase"; erase(); } if(end!=null && start!=null) { if(varname.equals("end")) end=ps; if(varname.equals("mp")) mp=ps; if(varname.equals("start")) start=ps; if(event.equals("drag")) repaint(); else if(event.equals("release")) draw(); } } catch(Exception e) { e.printStackTrace(); } } //To set the size of the image public void setWidth(int x,int y) { System.out.println("("+x+","+y+")"); w=x; h=y; image = new BufferedImage(w, h, BufferedImage.TYPE_INT_RGB); Graphics2D g2 = image.createGraphics(); g2.setPaint(Color.white); g2.fillRect(0,0,w,h); g2.dispose(); } //Function which provides the erase functionality public void erase() { Graphics2D pic=(Graphics2D) image.getGraphics(); pic.setPaint(Color.white); pic.fillRect(start.x, start.y, 10, 10); } //Function to add buttons into the panel, calling this function returns a panel public JPanel addButtons() { JPanel buttonpanel=new JPanel(); JPanel row1=new JPanel(); JPanel row2=new JPanel(); JPanel row3=new JPanel(); JPanel row4=new JPanel(); buttonpanel.setPreferredSize(new Dimension(80,80)); //buttonpanel.setMinimumSize(new Dimension(150,150)); row1.setLayout(new BoxLayout(row1,BoxLayout.X_AXIS)); row1.setPreferredSize(new Dimension(150,150)); row2.setLayout(new BoxLayout(row2,BoxLayout.X_AXIS)); row3.setLayout(new BoxLayout(row3,BoxLayout.X_AXIS)); row4.setLayout(new BoxLayout(row4,BoxLayout.X_AXIS)); buttonpanel.setLayout(new BoxLayout(buttonpanel,BoxLayout.Y_AXIS)); elipse.addActionListener(this); rectangle.addActionListener(this); line.addActionListener( this); save.addActionListener( this); erase.addActionListener( this); buttonpanel.add(Box.createRigidArea(new Dimension(10,10))); row1.add(elipse); row1.add(Box.createRigidArea(new Dimension(5,0))); row1.add(rectangle); buttonpanel.add(row1); buttonpanel.add(Box.createRigidArea(new Dimension(10,10))); row2.add(line); row2.add(Box.createRigidArea(new Dimension(5,0))); row2.add(empty); buttonpanel.add(row2); buttonpanel.add(Box.createRigidArea(new Dimension(10,10))); row3.add(save); buttonpanel.add(row3); buttonpanel.add(Box.createRigidArea(new Dimension(10,10))); row4.add(erase); buttonpanel.add(row4); return buttonpanel; } //To save the image drawn public void save() { try { ByteArrayOutputStream bos = new ByteArrayOutputStream(); JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(bos); JFileChooser fc = new JFileChooser(); fc.showSaveDialog(this); encoder.encode(image); byte[] jpgData = bos.toByteArray(); FileOutputStream fos = new FileOutputStream(fc.getSelectedFile()+".jpeg"); fos.write(jpgData); fos.close(); //add replce confirmation here } catch (IOException e) { System.out.println(e); } } public void mouseClicked(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseEntered(MouseEvent arg0) { } public void mouseExited(MouseEvent arg0) { // TODO Auto-generated method stub } public void mousePressed(MouseEvent e) { if(selected=="line"||selected=="erase") { start=e.getPoint(); client.broadcast(start,"start", selected,"press"); } else if(selected=="elipse"||selected=="rect") { mp = e.getPoint(); client.broadcast(mp,"mp", selected,"press"); } } public void mouseReleased(MouseEvent e) { if(start!=null) { if(selected=="line") { end=e.getPoint(); client.broadcast(end,"end", selected,"release"); } else if(selected=="elipse"||selected=="rect") { end.x = Math.max(mp.x,e.getX()); end.y = Math.max(mp.y,e.getY()); client.broadcast(end,"end", selected,"release"); } draw(); } //start=null; } public void mouseDragged(MouseEvent e) { if(end==null) end = new Point(); if(start==null) start = new Point(); if(selected=="line") { end=e.getPoint(); client.broadcast(end,"end", selected,"drag"); } else if(selected=="erase") { start=e.getPoint(); erase(); client.broadcast(start,"start", selected,"drag"); } else if(selected=="elipse"||selected=="rect") { start.x = Math.min(mp.x,e.getX()); start.y = Math.min(mp.y,e.getY()); end.x = Math.max(mp.x,e.getX()); end.y = Math.max(mp.y,e.getY()); client.broadcast(start,"start", selected,"drag"); client.broadcast(end,"end", selected,"drag"); } repaint(); } @Override public void mouseMoved(MouseEvent arg0) { // TODO Auto-generated method stub } public void actionPerformed(ActionEvent e) { if(e.getSource()==elipse) selected="elipse"; if(e.getSource()==line) selected="line"; if(e.getSource()==rectangle) selected="rect"; if(e.getSource()==save) save(); if(e.getSource()==erase) { selected="erase"; erase(); } } } class Button extends JButton { String name; public Button(String name) { this.name=name; Dimension buttonSize = new Dimension(35,35); setMaximumSize(buttonSize); } public void paintComponent(Graphics g) { super.paintComponent(g); Graphics2D g2 = (Graphics2D)g; g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON); //g2.setStroke(new BasicStroke(1.2f)); if (name == "line") g.drawLine(5,5,30,30); if (name == "elipse") g.drawOval(5,7,25,20); if (name== "rect") g.drawRect(5,5,25,23); } }

    Read the article

  • Jquery Flexslider - can't see navigational images (manualControl)

    - by Kim Thomas
    I've spent a lot of time looking at the post on 3/13/12 re: manual controls, but isn't getting me all the way there...probably because I don't know jquery. Sorry, newbie on board. I'm trying to get the right/left arrows to show, as well as the 1, 2, 3...at the bottom. They are there, I see the lists on Firebug, just don't know how to add them to the "hook" (?) so they appear. Here is the code I have in header: <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js" type="text/javascript"></script> <script src="jquery.flexslider.js"></script> <script type="text/javascript" charset="utf-8"> $(window).load(function() { $('.flexslider').flexslider({ animation: "slide", slideshow: false, controlNav: true, manualControls: ".flex-control-nav li a", controlsContainer: ".flex-container" }); }); </script> Here is my html: <div class="flex-container"> <div class="flexslider"> <ul class="slides"> <li><img src="images/tah_home.jpg" alt="taylor art house home page" width="600" height="320"/> <p class="flex-caption">Taylor Art House Home Page</p></li> <li><img src="images/tah_blog.jpg" alt="taylor art house blog page" width="600" height="320" /> <p class="flex-caption">We created a blog that fits seemlessly into Taylor Art House's look</p></li> <li><img src="images/tah_artwork_page.jpg" alt="taylor art house art page" width="600" height="320" /> <p class="flex-caption">One of Taylor Art House's gallery pages, using a Wordpress plugin</p></li> <li><img src="images/tah_arch_portfolio.jpg" alt="jon taylor architecture portfolio page" width="600" height="320" /> <p class="flex-caption">We created links to toggle from TAH to Jon Taylor Architecture</p></li> </ul> </div><!--end flexsider--> </div><!--end flex-container--> Here is the Flexslider CSS: /* * jQuery FlexSlider v1.8 * http://www.woothemes.com/flexslider/ * * Copyright 2012 WooThemes * Free to use under the MIT license. * http://www.opensource.org/licenses/mit-license.php */ /* Browser Resets */ .flex-container a:active, .flexslider a:active, .flex-container a:focus, .flexslider a:focus {outline: none;} .slides, .flex-control-nav, .flex-direction-nav {margin: 0; padding: 0; list-style: none;} /* FlexSlider Necessary Styles *********************************/ .flexslider { width: 100%; margin: 0; padding: 0; } .flexslider .slides > li { display: none; -webkit-backface-visibility: hidden; } /* Hide the slides before the JS is loaded. Avoids image jumping */ .flexslider .slides img { max-width: 100%; display: block; } .flex-pauseplay span { text-transform: capitalize; } /* Clearfix for the .slides element */ .slides:after { content: "."; display: block; clear: both; visibility: hidden; line-height: 0; height: 0; } html[xmlns] .slides { display: block; } * html .slides { height: 1%; } /* No JavaScript Fallback */ /* If you are not using another script, such as Modernizr, make sure you * include js that eliminates this class on page load */ .no-js .slides > li:first-child { display: block; } /* FlexSlider Default Theme *********************************/ .flexslider { width: 600px; background: #fff; border: 4px solid #999; position: relative; margin: 30px 0; -webkit-border-radius: 5px; -moz-border-radius: 5px; -o-border-radius: 5px; border-radius: 5px; zoom: 1; } .flexslider .slides { zoom: 1; } .flexslider .slides > li { position: relative; } /* Suggested container for "Slide" animation setups. Can replace this with your own, if you wish */ .flex-container { zoom: 1; position: relative; margin-left:100px; } /* Caption style */ /* IE rgba() hack */ .flex-caption { background:none; -ms-filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#4C000000,endColorstr=#4C000000); filter:progid:DXImageTransform.Microsoft.gradient(startColorstr=#4C000000,endColorstr=#4C000000); zoom: 1; } .flex-caption { width: 96%; padding: 2%; margin: 0; position: absolute; left: 0; bottom: 0; background: rgba(0,0,0,.3); color: #fff; text-shadow: 0 -1px 0 rgba(0,0,0,.3); font-size: 14px; line-height: 18px; } /* Direction Nav */ .flex-direction-nav { height: 0; } .flex-direction-nav li a { width: 52px; height: 52px; margin: -13px 0 0; display: block; background: url(theme/bg_direction_nav.png) no-repeat; position: absolute; top: 50%; cursor: pointer; text-indent: -999em; } .flex-direction-nav li .next { background-position: -52px 0; right: -21px; } .flex-direction-nav li .prev { left: -20px; } .flex-direction-nav li .disabled { opacity: .3; filter:alpha(opacity=30); cursor: default; } /* Control Nav */ .flex-control-nav { width: 100%; position: absolute; bottom: -30px; text-align: center; } .flex-control-nav li { margin: 0 0 0 5px; display: inline-block; zoom: 1; *display: inline; } .flex-control-nav li:first-child { margin: 0; } .flex-control-nav li a { width: 13px; height: 13px; display: block; background: url(theme/bg_control_nav.png) no-repeat; cursor: pointer; text-indent: -999em; } .flex-control-nav li a:hover { background-position: 0 -13px; } .flex-control-nav li a.active { background-position: 0 -26px; cursor: default; } Here is how it appears in Firebug: <div class="flex-container"> <div class="flexslider" style="overflow: hidden;"> <ul class="slides" style="width: 1200%; margin-left: -1800px;"> <li class="clone" style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li style="width: 600px; float: left; display: block;"> <li class="clone" style="width: 600px; float: left; display: block;"> </ul> </div> <ol class="flex-control-nav"> <li> <a class="">1</a> </li> <li> <li> <li> </ol> <ul class="flex-direction-nav"> <li> <a class="prev" href="#">Previous</a> </li> <li> <a class="next" href="#">Next</a> </li> </ul> </div> Finally, here is a link to the jsFiddle file (I saw someone wanted that in other flexslider post): http://jsfiddle.net/kthms/Wxmsp/ Link to page: http://www.kajortdesigns.com/tah.php I've tried every combo of class from the CSS in the manualControl: "", but I'm just guessing. If anyone can help this newbie out, I would be very appreciative. Explicit instructions are always appreciated.

    Read the article

  • Original object is also changed when values of cloned object are changed.

    - by fari
    I am trying to use clone but the original object is also changed when values of cloned object are changed. As you can see KalaGameState does not use any objects so a shallow copy should work. /** * This class represents the current state of a Kala game, including * which player's turn it is along with the state of the board; i.e. the * numbers of stones in each side pit, and each player's 'kala'). */ public class KalaGameState implements Cloneable { // your code goes here private int turn; private int[] sidePit; private boolean game; public Object clone() { try { return super.clone(); } catch (CloneNotSupportedException e) { // This should never happen throw new InternalError(e.toString()); } } /** * Constructs a new GameState with a specified number of stones in each * player's side pits. * @param startingStones the number of starting stones in each side pit. * @throws InvalidStartingStonesException if startingStones not in the range 1-10. */ public KalaGameState(int startingStones) throws InvalidStartingStonesException { game=true; turn=0; sidePit=new int[14]; for (int i=0; i <= 13 ; i++) { sidePit[i] = startingStones; } sidePit[6] =0; sidePit[13] =0; // your code goes here } /** * Returns the ID of the player whose turn it is. * @return A value of 0 = Player A, 1 = Player B. */ public int getTurn() { return turn; // your code goes here } /** * Returns the current kala for a specified player. * @param playerNum A value of 0 for Player A, 1 for Player B. * @throws IllegalPlayerNumException if the playerNum parameter * is not 0 or 1. */ public int getKala(int playerNum) throws IllegalPlayerNumException { if(playerNum!=0 || playerNum!=1) throw new IllegalPlayerNumException(playerNum); if(playerNum==0) return sidePit[6]; else return sidePit[13]; // your code goes here } /** * Returns the current number of stones in the specified pit for * the player whose turn it is. * @param sidePitNum the side pit being queried in the range 1-6. * @throws IllegalSidePitNumException if the sidePitNum parameter. * is not in the range 1-6. */ public int getNumStones(int sidePitNum) throws IllegalSidePitNumException { if(turn==0) { if(sidePitNum>6 ) throw new IllegalSidePitNumException(sidePitNum); } else if(sidePitNum>12) throw new IllegalSidePitNumException(sidePitNum); if(turn==0) return sidePit[sidePitNum]; else return sidePit[sidePitNum+6]; // your code goes here } /** * Returns the current number of stones in the specified pit for a specified player. * @param playerNum the player whose kala is sought. (0 = Player A, 1 = Player B). * @param sidePitNum the side pit being queried (in the range 1-6). * @throws IllegalPlayerNumException if the playerNum parameter is not 0 or 1. * @throws IllegalSidePitNumException if the sidePitNum parameter is not in the * range 1-6. */ public int getNumStones(int playerNum, int sidePitNum) throws IllegalPlayerNumException, IllegalSidePitNumException { /*if(playerNum>2) throw new IllegalPlayerNumException(playerNum); if(turn==0) { if(sidePitNum>6 ) throw new IllegalSidePitNumException(sidePitNum); } else if(sidePitNum>12) throw new IllegalSidePitNumException(sidePitNum); */ if(playerNum==0) return sidePit[sidePitNum]; else if(playerNum==1) return sidePit[sidePitNum+7]; else return sidePit[sidePitNum]; } /** * Returns the current score for a specified player - the player's * kala plus the number of stones in each of their side pits. * @param playerNum the player whose kala is sought. (0 = Player A, 1 = Player B). * @throws IllegalPlayerNumException if the playerNum parameter is not 0 or 1. */ public int getScore(int playerNum) throws IllegalPlayerNumException { if(playerNum>1) throw new IllegalPlayerNumException(playerNum); int score=0; if(playerNum==0) { for(int i=0;i<=5;i++) score=score+sidePit[i]; score=score+sidePit[6]; } else { for(int i=7;i<=12;i++) score=score+sidePit[i]; score=score+sidePit[13]; } // your code goes here return score; } private int getSidePitArrayIndex(int sidePitNum) throws IllegalSidePitNumException { if(turn==0) { if(sidePitNum>6 ) throw new IllegalSidePitNumException(sidePitNum); } else if(sidePitNum>12) throw new IllegalSidePitNumException(sidePitNum); if(turn==0) { return sidePitNum--; } else { return sidePitNum+6; } } public boolean gameOver() { int stone=0; if(turn==0) for(int i=0;i<=5;i++) stone=stone+getNumStones(i); else for(int i=7;i<=12;i++) stone=stone+getNumStones(i-7); if (stone==0) game=false; return game; } /** * Makes a move for the player whose turn it is. * @param sidePitNum the side pit being queried (should be in the range 1-6) * @throws IllegalSidePitNumException if the sidePitNum parameter is not in the range 1-6. * @throws IllegalMoveException if the side pit is empty and has no stones in it. */ public void makeMove(int sidePitNum) throws IllegalSidePitNumException, IllegalMoveException { if(turn==0) { if(sidePitNum>6 ) throw new IllegalSidePitNumException(sidePitNum); } else if(sidePitNum>12) throw new IllegalSidePitNumException(sidePitNum); /* if(turn==0) { if(sidePit[sidePitNum-1]==0) throw new IllegalMoveException(sidePitNum); } else { if(sidePit[sidePitNum-1+7]==0) throw new IllegalMoveException(sidePitNum); } */ sidePitNum--; int temp=sidePitNum; int pitNum=sidePitNum+1; int stones=getNumStones(turn,sidePitNum); if(turn==0) sidePit[sidePitNum]=0; else { sidePitNum=sidePitNum+7; sidePit[sidePitNum]=0; pitNum=pitNum+7; } while(stones!=0) { if(turn==0) { sidePit[pitNum]=sidePit[pitNum]+1; stones--; pitNum++; if(pitNum==13) pitNum=0; } else { sidePit[pitNum]=sidePit[pitNum]+1; stones--; pitNum++; if(pitNum==6) pitNum=7; else if(pitNum==14) pitNum=0; } } boolean res=anotherTurn(pitNum); if(!res){ capture(pitNum,temp); if(turn==0) turn=1; else turn=0;} } private boolean anotherTurn(int pitNum) {pitNum--; boolean temp=false; if(turn==0) {if(pitNum==6) {turn=0; temp=true; } } else if(pitNum==-1) {turn=1; temp=true; } return temp; } private void capture(int pitNum, int pit) { pitNum--; if(turn==0){ if(sidePit[pitNum]==1 && pitNum<6) { if(pitNum==0) { sidePit[6]=sidePit[6]+sidePit[12]+1; sidePit[12]=0; } else if(pitNum==1) { sidePit[6]=sidePit[6]+sidePit[11]+1; sidePit[11]=0; } else if(pitNum==2) { sidePit[6]=sidePit[6]+sidePit[10]+1; sidePit[10]=0; } else if(pitNum==3) { sidePit[6]=sidePit[6]+sidePit[9]+1; sidePit[9]=0; } else if(pitNum==4) { sidePit[6]=sidePit[6]+sidePit[8]+1; sidePit[8]=0; } else if(pitNum==5) { sidePit[6]=sidePit[6]+sidePit[7]+1; sidePit[7]=0; } sidePit[pitNum]=0; } } if(turn==1) { //pitNum=pitNum; if(sidePit[pitNum]==1 && pit+7>6) { if(pitNum==7) { sidePit[13]=sidePit[13]+sidePit[5]+1; sidePit[7]=0; } else if(pitNum==8) { sidePit[13]=sidePit[13]+sidePit[4]+1; sidePit[4]=0; } else if(pitNum==9) { sidePit[13]=sidePit[13]+sidePit[3]+1; sidePit[3]=0; } else if(pitNum==10) { sidePit[13]=sidePit[13]+sidePit[2]+1; sidePit[2]=0; } else if(pitNum==11) { sidePit[13]=sidePit[13]+sidePit[1]+1; sidePit[1]=0; } else if(pitNum==12) { sidePit[13]=sidePit[13]+sidePit[0]+1; sidePit[0]=0; } sidePit[pitNum]=0; } } } } import java.io.BufferedReader; import java.io.InputStreamReader; public class RandomPlayer extends KalaPlayer{ //KalaGameState state; public int chooseMove(KalaGameState gs) throws NoMoveAvailableException {int[] moves; moves=getMoves(gs); try{ for(int i=0;i<=5;i++) System.out.println(moves[i]); for(int i=0;i<=5;i++) { if(moves[i]==1) { KalaGameState state=(KalaGameState) gs.clone(); state.makeMove(moves[i]); gs.getTurn(); moves[i]=evalValue(state.getScore(0),state.getScore(1)); } } } catch(IllegalMoveException e) { System.out.println(e); //chooseMove(state); } return 10; } private int evalValue(int score0,int score1) { int score=0; //int score0=0; // int score1=0; //getScore(0); //score1=state.getScore(1); //if((state.getTurn())==0) score=score1-score0; //else //score=score1-score0; System.out.println("score: "+score); return score; } public int[] getMoves(KalaGameState gs) { int[] moves=new int[6]; for(int i=1;i<=6;i++) { if(gs.getNumStones(i)!=0) moves[i-1]=1; else moves[i-1]=0; } return moves; } } Can you explain what is going wrong, please?

    Read the article

  • Why Look and feel is not getting updated properly?

    - by swift
    I’m developing a swing application in which I have an option to change the Look and feel of the application on click of a button. Now my problem is when I click the button to change the theme it’s not properly updating the L&F of my app, say my previous theme is “noire” and I choose “MCWin” after it, but the style of the noire theme is still there Here is sample working code: package whiteboard; import java.awt.GridBagLayout; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.ComponentEvent; import java.awt.event.ComponentListener; import javax.swing.JFrame; import javax.swing.JLayeredPane; import javax.swing.JMenu; import javax.swing.JMenuBar; import javax.swing.JMenuItem; import javax.swing.SwingUtilities; import javax.swing.UIManager; import javax.swing.WindowConstants; public class DiscussionBoard extends JFrame implements ComponentListener,ActionListener { // Variables declaration private JMenuItem audioMenuItem; private JMenuItem boardMenuItem; private JMenuItem exitMenuItem; private JMenuItem clientsMenuItem; private JMenuItem acryl; private JMenuItem hifi; private JMenuItem aero; private JMenuItem aluminium; private JMenuItem bernstein; private JMenuItem fast; private JMenuItem graphite; private JMenuItem luna; private JMenuItem mcwin; private JMenuItem noire; private JMenuItem smart; private JMenuBar boardMenuBar; private JMenuItem messengerMenuItem; private JMenu openMenu; private JMenu saveMenu; private JMenu themesMenu; private JMenuItem saveMessengerMenuItem; private JMenuItem saveWhiteboardMenuItem; private JMenu userMenu; JLayeredPane layerpane; /** Creates new form discussionBoard * @param connection */ public DiscussionBoard() { initComponents(); setLocationRelativeTo(null); addComponentListener(this); } private void initComponents() { boardMenuBar = new JMenuBar(); openMenu = new JMenu(); themesMenu = new JMenu(); messengerMenuItem = new JMenuItem(); boardMenuItem = new JMenuItem(); audioMenuItem = new JMenuItem(); saveMenu = new JMenu(); saveMessengerMenuItem = new JMenuItem(); saveWhiteboardMenuItem = new JMenuItem(); userMenu = new JMenu(); clientsMenuItem = new JMenuItem(); exitMenuItem = new JMenuItem(); setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE); setLayout(new GridBagLayout()); setResizable(false); setTitle("Discussion Board"); openMenu.setText("Open"); saveMenu.setText("Save"); themesMenu.setText("Themes"); acryl = new JMenuItem("Acryl"); hifi = new JMenuItem("HiFi"); aero = new JMenuItem("Aero"); aluminium = new JMenuItem("Aluminium"); bernstein = new JMenuItem("Bernstein"); fast = new JMenuItem("Fast"); graphite = new JMenuItem("Graphite"); luna = new JMenuItem("Luna"); mcwin = new JMenuItem("MCwin"); noire = new JMenuItem("Noire"); smart = new JMenuItem("Smart"); hifi.addActionListener(this); acryl.addActionListener(this); aero.addActionListener(this); aluminium.addActionListener(this); bernstein.addActionListener(this); fast.addActionListener(this); graphite.addActionListener(this); luna.addActionListener(this); mcwin.addActionListener(this); noire.addActionListener(this); smart.addActionListener(this); messengerMenuItem.setText("Messenger"); openMenu.add(messengerMenuItem); openMenu.add(boardMenuItem); audioMenuItem.setText("Audio Messenger"); openMenu.add(audioMenuItem); exitMenuItem.setText("Exit"); exitMenuItem.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent evt) { exitMenuItemActionPerformed(evt); } }); openMenu.add(exitMenuItem); boardMenuBar.add(openMenu); saveMessengerMenuItem.setText("Messenger"); saveMenu.add(saveMessengerMenuItem); saveWhiteboardMenuItem.setText("Whiteboard"); saveMenu.add(saveWhiteboardMenuItem); boardMenuBar.add(saveMenu); userMenu.setText("Users"); clientsMenuItem.setText("Current Session"); userMenu.add(clientsMenuItem); themesMenu.add(acryl); themesMenu.add(hifi); themesMenu.add(aero); themesMenu.add(aluminium); themesMenu.add(bernstein); themesMenu.add(fast); themesMenu.add(graphite); themesMenu.add(luna); themesMenu.add(mcwin); themesMenu.add(noire); themesMenu.add(smart); boardMenuBar.add(userMenu); boardMenuBar.add(themesMenu); saveMessengerMenuItem.setEnabled(false); saveWhiteboardMenuItem.setEnabled(false); setJMenuBar(boardMenuBar); setSize(1024, 740); setVisible(true); } protected void exitMenuItemActionPerformed(ActionEvent evt) { System.exit(0); } @Override public void componentHidden(ComponentEvent arg0) { } @Override public void componentMoved(ComponentEvent e) { } @Override public void componentResized(ComponentEvent arg0) { } @Override public void componentShown(ComponentEvent arg0) { } @Override public void actionPerformed(ActionEvent e) { try { if(e.getSource()==hifi) { UIManager.setLookAndFeel("javax.swing.plaf.metal.MetalLookAndFeel"); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.hifi.HiFiLookAndFeel"); enableTheme(); hifi.setEnabled(false); } else if(e.getSource()==acryl) { UIManager.setLookAndFeel("javax.swing.plaf.metal.MetalLookAndFeel"); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.acryl.AcrylLookAndFeel"); enableTheme(); acryl.setEnabled(false); } else if(e.getSource()==aero) { UIManager.setLookAndFeel("javax.swing.plaf.metal.MetalLookAndFeel"); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.aero.AeroLookAndFeel"); enableTheme(); aero.setEnabled(false); } else if(e.getSource()==aluminium) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.aluminium.AluminiumLookAndFeel"); enableTheme(); aluminium.setEnabled(false); } else if(e.getSource()==bernstein) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.bernstein.BernsteinLookAndFeel"); enableTheme(); bernstein.setEnabled(false); } else if(e.getSource()==fast) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.fast.FastLookAndFeel"); enableTheme(); fast.setEnabled(false); } else if(e.getSource()==graphite) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.graphite.GraphiteLookAndFeel"); enableTheme(); graphite.setEnabled(false); } else if(e.getSource()==luna) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.luna.LunaLookAndFeel"); enableTheme(); luna.setEnabled(false); } else if(e.getSource()==mcwin) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.mcwin.McWinLookAndFeel"); enableTheme(); mcwin.setEnabled(false); } else if(e.getSource()==noire) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.noire.NoireLookAndFeel"); enableTheme(); noire.setEnabled(false); } else if(e.getSource()==smart) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.smart.SmartLookAndFeel"); enableTheme(); smart.setEnabled(false); } SwingUtilities.updateComponentTreeUI(getRootPane()); } catch (Exception ex) { ex.printStackTrace(); } } private void enableTheme() { acryl.setEnabled(true); hifi.setEnabled(true); aero.setEnabled(true); aluminium.setEnabled(true); bernstein.setEnabled(true); fast.setEnabled(true); graphite.setEnabled(true); luna.setEnabled(true); mcwin.setEnabled(true); noire.setEnabled(true); smart.setEnabled(true); } public static void main(String []ar) { try { UIManager.setLookAndFeel("com.jtattoo.plaf.acryl.AcrylLookAndFeel"); } catch (Exception e) { e.printStackTrace(); } new DiscussionBoard(); } } What’s the problem here? why its not getting updated? There is a demo application here which is exactly doing what i want but i cant get a clear idea of it.

    Read the article

< Previous Page | 683 684 685 686 687 688 689 690 691 692 693 694  | Next Page >