Search Results

Search found 21369 results on 855 pages for '128 bit'.

Page 69/855 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• HP to Cisco spanning tree root flapping

  - by Tim Brigham

  Per a recent question I recently configured both my HP (2x 2900) and Cisco (1x 3750) hardware to use MSTP for interoperability. I thought this was functional until I applied the change to the third device (HP switch 1 below) at which time the spanning tree root started flapping causing performance issues (5% packet loss) between my two HP switches. I'm not sure why. HP Switch 1 A4 connected to Cisco 1/0/1. HP Switch 2 B2 connected to Cisco 2/0/1. HP Switch 1 A2 connected to HP Switch 2 A1. I'd prefer the Cisco stack to act as the root. EDIT: There is one specific line - 'spanning-tree 1 path-cost 500000' in the HP switch 2 that I didn't add and was preexisting. I'm not sure if it could have the kind of impact that I'm describing. I'm more a security and monitoring guy then networking. EDIT 2: I'm starting to believe the problem lies in the fact that the value for my MST 0 instance on the Cisco is still at the default 32768. I worked up a diagram: This is based on every show command I could find for STP. I'll make this change after hours and see if it helps. Cisco 3750 Config: version 12.2 spanning-tree mode mst spanning-tree extend system-id spanning-tree mst configuration name mstp revision 1 instance 1 vlan 1, 40, 70, 100, 250 spanning-tree mst 1 priority 0 vlan internal allocation policy ascending interface TenGigabitEthernet1/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface TenGigabitEthernet2/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface Vlan1 no ip address ! interface Vlan100 ip address 192.168.100.253 255.255.255.0 ! Cisco 3750 show spanning tree: show spanning-tree MST0 Spanning tree enabled protocol mstp Root ID Priority 32768 Address 0004.ea84.5f80 Cost 200000 Port 53 (TenGigabitEthernet1/1/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32768 (priority 32768 sys-id-ext 0) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Root FWD 2000 128.53 P2p MST1 Spanning tree enabled protocol mstp Root ID Priority 1 Address a44c.11a6.7c80 This bridge is the root Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 1 (priority 0 sys-id-ext 1) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Desg FWD 2000 128.53 P2p Cisco 3750 show logging: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up HP Switch 1: ; J9049A Configuration Editor; Created on release #T.13.71 vlan 1 name "DEFAULT_VLAN" untagged 1-8,10,13-16,18-23,A1-A4 ip address 100.100.100.17 255.255.255.0 no untagged 9,11-12,17,24 exit vlan 100 name "192.168.100" untagged 9,11-12,17,24 tagged 1-8,10,13-16,18-23,A1-A4 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A4 no ip address exit vlan 40 name "Cafe" tagged 1,4,7,A1-A4 no ip address exit vlan 250 name "Firewall" tagged 1,4,7,A1-A4 no ip address exit vlan 70 name "DMZ" tagged 1,4,7-8,13,A1-A4 no ip address exit spanning-tree spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 password manager password operator HP Switch 1 show spanning tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0021f7-126580 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 363,490 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : 1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 | Auto 128 Disabled | A2 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A3 10GbE-CX4 | Auto 128 Disabled | A4 10GbE-SR | Auto 128 Disabled | HP Switch 1 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00842 stp: MSTI 1 starved for an MSTI Msg Rx on port A4 from 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to ... HP Switch 2 Configuration: ; J9146A Configuration Editor; Created on release #W.14.49 vlan 1 name "DEFAULT_VLAN" untagged 1,3-17,21-24,A1-A2,B2 ip address 100.100.100.36 255.255.255.0 no untagged 2,18-20,B1 exit vlan 100 name "192.168.100" untagged 2,18-20 tagged 1,3-17,21-24,A1-A2,B1-B2 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A2,B2 no ip address exit vlan 40 name "Cafe" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 250 name "Firewall" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 70 name "DMZ" tagged 1,13-14,16,A1-A2,B2 no ip address exit logging 192.168.100.18 spanning-tree spanning-tree 1 path-cost 500000 spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 HP Switch 2 Spanning Tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0024a8-cd6000 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 21,793 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : A1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 2000 IST Remaining Hops : 19 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A2 10GbE-CX4 | Auto 128 Disabled | B1 SFP+SR | 2000 128 Forwarding | 0024a8-cd6000 2 Yes No B2 | Auto 128 Disabled | HP Switch 2 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80 00839 stp: IST Root changed from 32768:0021f7-126580 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0004ea-845f80 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00435 ports: port B1 is Blocked by STP 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: IST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80

  Read the article

• howto only tunnel specific hosts route through openvpn client on tomato

  - by kcome

  I am relatively newbie in networking world although I did coding and know some sysadmin background for a long time. and here I'm only one step from my destination. The whole picture is : at home I use one LinkSys E3000 as the gateway(don't know yet if this is it's name), wireless AP and no other routing/switching devices. It serves 1 PC and 1 Mac with LAN, 1 Mac Mini + 1 iPad + 2 smartphones with WIFI. My goal is use an openvpn client on the E3000 (with tomato firmware) and make my iPad and smartphone's all WiFi traffic through it, and other devices route remain the same non-openvpn route. So far I'm able to connect openvpn client on E3000 to an openvpn server, tunnel all my devices' all traffic through that openvpn connection. What's left is howto selectively route by source IP (at least in my guessing) to the tunnel while don't bother others. I had learned some 'iptables' and 'route' in past few days however without much luck, so here comes my question. Here are some info which will help you get the structure. ifconfig -a output, some useless lines striped, and in the web interface C0:C1:C0:1A:E0:28 is WAN, C0:C1:C0:1A:E0:27 is LAN, C0:C1:C0:1A:E0:29 is 2.4G wifi AP, C0:C1:C0:1A:E0:2A is 5G wifi AP. root@router:/tmp/home/root# ifconfig -a br0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 eth2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:2A UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host ppp0 Link encap:Point-to-Point Protocol inet addr:172.200.1.43 P-t-P:172.200.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING MULTICAST MTU:1480 Metric:1 vlan1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 vlan2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:28 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 wl0.1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 BROADCAST MULTICAST MTU:1500 Metric:1 brctl show output root@router:/tmp/home/root# brctl show bridge name bridge id STP enabled interfaces br0 8000.c0c1c01ae027 no vlan1 eth1 eth2 before openvpn route-up script root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 openvpn server push PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 8.8.8.8,route 172.20.0.1,topology net30,ping 10,ping-restart 120,ifconfig 172.20.0.6 172.20.0.5' openvpn's stock route-up script Apr 24 14:52:06 router daemon.notice openvpn[1768]: /sbin/ifconfig tun11 172.20.0.6 pointopoint 172.20.0.5 mtu 1500 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 72.14.177.29 netmask 255.255.255.255 gw 172.200.0.1 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 172.20.0.1 netmask 255.255.255.255 gw 172.20.0.5 route after openvpn root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.20.0.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun11 72.14.177.29 172.200.0.1 255.255.255.255 UGH 0 0 0 ppp0 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 172.20.0.1 172.20.0.5 255.255.255.255 UGH 0 0 0 tun11 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 128.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 something I had noticed and tried: * on the web interface of openvpn client there is an option "Create NAT on tunnel", if i check this, there is the following script (probably executed after openvpn connection established) root@router:/tmp/home/root# cat /tmp/etc/openvpn/fw/client1-fw.sh #!/bin/sh iptables -I INPUT -i tun11 -j ACCEPT iptables -I FORWARD -i tun11 -j ACCEPT iptables -t nat -I POSTROUTING -s 192.168.1.0/255.255.255.0 -o tun11 -j MASQUERADE if i uncheck this option, the last line will not appear. Then I guess probably the my issue will be solved by iptables and NAT related commands, I just haven't got enough knowledge to figure them out. I tried run iptables -t nat -I POSTROUTING -s 192.168.1.6 -o tun11 -j MASQUERADE manually after openvpn connected (192.168.1.6 is the ip address of my iPad), then my iPad get internet with openvpn tunnel, however all other devices can't reach internet. in case if needed, here is the iptables about NAT root@router:/tmp/home/root# iptables -t nat -L -n Chain PREROUTING (policy ACCEPT) target prot opt source destination DROP all -- 0.0.0.0/0 192.168.1.0/24 WANPREROUTING all -- 0.0.0.0/0 172.200.1.43 upnp all -- 0.0.0.0/0 172.200.1.43 Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 SNAT all -- 192.168.1.0/24 192.168.1.0/24 to:192.168.1.1 Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain WANPREROUTING (1 references) target prot opt source destination DNAT icmp -- 0.0.0.0/0 0.0.0.0/0 to:192.168.1.1 Chain upnp (1 references) target prot opt source destination DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5353 to:192.168.1.3:5353 Thanks in advance for helping and read this so much, I hope i made every info you need to give a help :)

  Read the article

• How to tell if Microsoft Works is 32 or 64 bit? Please Help!

  - by Bill Campbell

  Hi, I am trying to convert one of our apps to run on Win7 64 bit from XP 32 bit. One of the things that it uses is Excel to import files. It's a little complicated since it was using Microsoft.Jet.OLEDB.4.0 (Excel). I found Office 14 (2010) has a 64bit version I can download. I downloaded Office 2010 Beta but it didn't seem to install Microsoft.ACE.OLEDB.14.0. I found that I could download 2010 Office System Driver Beta: Data Connectivity Components which has the ACE.OLEDB.14 in it but when I try to install it, the installed tells me "You cannot install the 64-bit version of Access Database engine for Microsoft Office 2010 because you currently have 32-bit Office products installed". How do I determine what 32bit office products this is reffering to? My Dell came with Microsoft Works installed. I don't know if this is 32 or 64 bit. Is there anyway to tell? I don't want to uninstall this if it's not the problem and I'm not sure what else might be the problem. Any help would be appreciated! thanks, Bill

  Read the article

• Windows DNS Server 2008 R2 fallaciously returns SERVFAIL

  - by Easter Sunshine

  I have a Windows 2008 R2 domain controller which is also a DNS server. When resolving certain TLDs, it returns a SERVFAIL: $ dig bogus. ; <<>> DiG 9.8.1 <<>> bogus. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 31919 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;bogus. IN A I get the same result for a real TLD like com. when querying the DC as shown above. Compare to a BIND server that is working as expected: $ dig bogus. @128.59.59.70 ; <<>> DiG 9.8.1 <<>> bogus. @128.59.59.70 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 30141 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;bogus. IN A ;; AUTHORITY SECTION: . 10800 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2012012501 1800 900 604800 86400 ;; Query time: 18 msec ;; SERVER: 128.59.59.70#53(128.59.59.70) ;; WHEN: Wed Jan 25 14:09:14 2012 ;; MSG SIZE rcvd: 98 Similarly, when I query my Windows DNS server with dig . any, I get a SERVFAIL but the BIND servers return the root zone as expected. This sounds similar to the issue described in http://support.microsoft.com/kb/968372 except I am using two forwarders (128.59.59.70 from above as well as 128.59.62.10) and falling back to root hints so the preconditions to expose the issue are not the same. Nevertheless, I also applied the MaxCacheTTL registry fix as described and restarted DNS and the whole server as well but the problem persists. The problem occurs on all domain controllers in this domain and has occurred since half a year ago, even though the servers are getting automatic Windows updates. EDIT Here is a debug log. The client is 160.39.114.110, which is my workstation. 1/25/2012 2:16:01 PM 0E08 PACKET 000000001EA6BFD0 UDP Rcv 160.39.114.110 2e94 Q [0001 D NOERROR] A (5)bogus(0) UDP question info at 000000001EA6BFD0 Socket = 508 Remote addr 160.39.114.110, port 49710 Time Query=1077016, Queued=0, Expire=0 Buf length = 0x0fa0 (4000) Msg length = 0x0017 (23) Message: XID 0x2e94 Flags 0x0100 QR 0 (QUESTION) OPCODE 0 (QUERY) AA 0 TC 0 RD 1 RA 0 Z 0 CD 0 AD 0 RCODE 0 (NOERROR) QCOUNT 1 ACOUNT 0 NSCOUNT 0 ARCOUNT 0 QUESTION SECTION: Offset = 0x000c, RR count = 0 Name "(5)bogus(0)" QTYPE A (1) QCLASS 1 ANSWER SECTION: empty AUTHORITY SECTION: empty ADDITIONAL SECTION: empty 1/25/2012 2:16:01 PM 0E08 PACKET 000000001EA6BFD0 UDP Snd 160.39.114.110 2e94 R Q [8281 DR SERVFAIL] A (5)bogus(0) UDP response info at 000000001EA6BFD0 Socket = 508 Remote addr 160.39.114.110, port 49710 Time Query=1077016, Queued=0, Expire=0 Buf length = 0x0fa0 (4000) Msg length = 0x0017 (23) Message: XID 0x2e94 Flags 0x8182 QR 1 (RESPONSE) OPCODE 0 (QUERY) AA 0 TC 0 RD 1 RA 1 Z 0 CD 0 AD 0 RCODE 2 (SERVFAIL) QCOUNT 1 ACOUNT 0 NSCOUNT 0 ARCOUNT 0 QUESTION SECTION: Offset = 0x000c, RR count = 0 Name "(5)bogus(0)" QTYPE A (1) QCLASS 1 ANSWER SECTION: empty AUTHORITY SECTION: empty ADDITIONAL SECTION: empty Every option in the debug log box was checked except "filter by IP". By contrast, when I query, say, accounts.google.com, I can see the DNS server go out to its forwarder (128.59.59.70, for example). In this case, I didn't see any packets going out from my DNS server even though bogus. was not in the cache (the debug log was already running and this is the first time I queried this server for bogus. or any TLD). It just returned SERVFAIL without consulting any other DNS server, as in the Microsoft KB article linked above.

  Read the article

• Preventing Doctrine from Dropping / Recreating Database When using build --all

  - by Levi Hackwith

  The problem: I have a database that's running on a shared server. I do not have permission to drop/ create a database via the command line doctrine SQLSTATE[42000]: Syntax error or access violation: 1044 Access denied for user 'opnsrce'@'173.236.128.0/255.255.128.0' to database 'dev'. Failing Query: "DROP DATABASE dev" doctrine Creating "all" environment "doctrine" database doctrine SQLSTATE[42000]: Syntax error or access violation: 1044 Access denied for user 'opnsrce'@'173.236.128.0/255.255.128.0' to database 'dev'. Failing Query: "CREATE DATABASE dev" This error occurs when I run /dh/cgi-system/php5.cgi symfony doctrine:build --all --no-confirmation The Question: How do I run build-all while simultaneously telling doctrine to not drop / create the database (it already exists)?

  Read the article

• Database design grouping contacts by lists and companies

  - by Serge

  Hi, I'm wondering what would be the best way to group contacts by their company. Right now a user can group their contacts by custom created lists but I'd like to be able to group contacts by their company as well as store the contact's position (i.e. Project Manager of XYZ company). Database wise this is what I have for grouping contacts into lists contact [id_contact] [int] PK NOT NULL, [lastName] [varchar] (128) NULL, [firstName] [varchar] (128) NULL, ...... contact_list [id_contact] [int] FK, [id_list] [int] FK, list [id_list] [int] PK [id_user] [int] FK [list_name] [varchar] (128) NOT NULL, [description] [TEXT] NULL Should I implement something similar for grouping contacts by company? If so how would I store the contact's position in that company and how can I prevent data corruption if a user modifies a contact's company name. For instance John Doe changed companies but the other co-workers are still in the old company. I doubt that will happen often (might not even happen at all) but better be safe than sorry. I'm also keeping an audit trail so in a way the contact would still need to be linked to the old company as well as the new one but without confusing what company he's actually working at the moment. I hope that made sense... Has anyone encountered such a problem? UPDATE Would something like this make sense contact_company [id_contact_company] [int] PK [id_contact] [int] FK [id_company] [int] FK [contact_title] [varchar] (128) company [id_company] [int] PK NOT NULL, [company_name] [varchar] (128) NULL, [company_description] [varchar] (300) NULL, [created_date] [datetime] NOT NULL This way a contact can work for more than one company and contacts can be grouped by companies

  Read the article

• Logictech USB HID controller message

  - by rross

  I have a Logitech game controller(http://www.amazon.com/Logitech-Dual-Action-Game-Pad/dp/B0000ALFCI). I'm using c# and Microsoft's HID driver to track what buttons are being pressed. Each button press sends a Byte Array that has 8 values. The problems is that I don't know what those 8 value represent. Here is an example: 0, 128, 126, 127, 130, 24, 24, 0, 4, 252 0, 128, 126, 127, 130, 40, 40, 0, 4, 252 0, 128, 126, 127, 127, 72, 72, 0, 4, 252 0, 128, 126, 127, 127, 136, 136, 0, 4, 252 Those are the values of the Byte Array for button press 1, 2, 3, 4 respectively. I see where the values are changing, but I'm unsure what they represent. I'm unable to find any specs on Microsoft HID driver. Can someone point me in the right direction?

  Read the article

• AES decryption in Java - IvParameterSpec to big

  - by user1277269

  Im going to decrypt a plaintext with two keys. As you see in the picture were have one encrypted file wich contains KEY1(128 bytes),KEYIV(128 bytes),key2(128bytes) wich is not used in this case then we have the ciphertext. The error I get here is "Exception in thread "main" java.security.InvalidAlgorithmParameterException: Wrong IV length: must be 16 bytes long. but it is 64 bytes." Picture: http://i264.photobucket.com/albums/ii200/XeniuM05/bg_zps0a523659.png public class AES { public static void main(String[] args) throws Exception { byte[] encKey1 = new byte[128]; byte[] EncIV = new byte[256]; byte[] UnEncIV = new byte[128]; byte[] unCrypKey = new byte[128]; byte[] unCrypText = new byte[1424]; File f = new File("C://ftp//ciphertext.enc"); FileInputStream fis = new FileInputStream(F); byte[] EncText = new byte[(int) f.length()]; fis.read(encKey1); fis.read(EncIV); fis.read(EncText); EncIV = Arrays.copyOfRange(EncIV, 128, 256); EncText = Arrays.copyOfRange(EncText, 384, EncText.length); System.out.println(EncText.length); KeyStore ks = KeyStore.getInstance(KeyStore.getDefaultType()); char[] password = "lab1StorePass".toCharArray(); java.io.FileInputStream fos = new java.io.FileInputStream( "C://ftp//lab1Store"); ks.load(fos, password); char[] passwordkey1 = "lab1KeyPass".toCharArray(); PrivateKey Lab1EncKey = (PrivateKey) ks.getKey("lab1EncKeys", passwordkey1); Cipher rsaDec = Cipher.getInstance("RSA"); // set cipher to RSA decryption rsaDec.init(Cipher.DECRYPT_MODE, Lab1EncKey); // initalize cipher ti lab1key unCrypKey = rsaDec.doFinal(encKey1); // Decryps first key UnEncIV = rsaDec.doFinal(EncIV); //decryps encive byte array to undecrypted bytearray---- OBS! Error this is 64 BYTES big, we want 16? System.out.println("lab1key "+ unCrypKey +" IV " + UnEncIV); //-------CIPHERTEXT decryption--------- Cipher AESDec = Cipher.getInstance("AES/CBC/PKCS5Padding"); //---------convert decrypted bytearrays to acctual keys SecretKeySpec unCrypKey1 = new SecretKeySpec(unCrypKey, "AES"); IvParameterSpec ivSpec = new IvParameterSpec(UnEncIV); AESDec.init(Cipher.DECRYPT_MODE, unCrypKey1, ivSpec ); unCrypText = AESDec.doFinal(EncText); // Convert decrypted cipher bytearray to string String deCryptedString = new String(unCrypKey); System.out.println(deCryptedString); }

  Read the article

• How to call an extended procedure from a function

  - by Alan Featherston Lago

  hi im having trouble trying to get the following function to work. CREATE FUNCTION test ( @nt_group VARCHAR(128) ) RETURNS @nt_usr TABLE ( [name] [nchar](128) NULL , [type] [char](8) NULL , [privilege] [char](9) NULL , [mapped login name] [nchar](128) NULL , [permission path] [nchar](128) NULL ) AS BEGIN INSERT INTO @nt_usr EXEC master.dbo.xp_logininfo 'DOMAIN\USER', @nt_group RETURN END As far as i know i should be allowed to call an extended stored procedure, im getting the following error Mes 443, Level 16, State 14 Could it be that xp_logininfo might return different result sets depending on the parameters? When i use openquery i can overcome this by setting this: SET FMTONLY OFF. Does anyone know if there's a similar workaround for my problem?

  Read the article

• Django ForeignKey created empty?

  - by Scott Willman

  This seems very basic and I must be missing something, but here goes anyways... With two models like so: class School(models.Model): name = models.CharField("Official School Name", max_length=128) address = models.TextField("Address of the School", max_length=256) mascot = models.CharField("Name of the School Mascot", max_length=128) class StudentProfile(models.Model): name = models.CharField(max_length=128) school = models.ForeignKey(School) If the student gets created before the school, how do I give 'school' a default empty value? Is it blank or null or what? Thanks!

  Read the article

• x86-64 long double precision

  - by aaa

  hello. What is the actual precision of long double on Intel 64-bit platforms? is it 80 bits padded to 128 or actual 128 bit? if former, besides going gmp, is there another option to achieve true 128 precision?

  Read the article

• Get a specific entry by group in SQL

  - by Jensen

  Hi, I've a database who contain some datas in that form: icon(name, size, tag) (myicon.png, 16, 'twitter') (myicon.png, 32, 'twitter') (myicon.png, 128, 'twitter') (myicon.png, 256, 'twitter') (anothericon.png, 32, 'facebook') (anothericon.png, 128, 'facebook') (anothericon.png, 256, 'facebook') So as you see it, the name field is not uniq I can have multiple icons with the same name and they are separated with the size field. Now in PHP I have a query that get ONE icon set, for example : mysql_query("SELECT * FROM icon WHERE tag='".$tag."' ORDER BY size LIMIT 0, 10"); With this example if $tag contain 'twitter' it will show ONLY the first SQL data entry with the tag 'twitter', so it will be : (myicon.png, 16, 'twitter') This is what I want, but I would prefer the '128' size by default. Is this possible to tell SQL to send me only the 128 size when existing and if not another size ? Thanks !

  Read the article

• How do I know my laptop is 64 bit compatible?

  - by c.sokun

  I recently plan to buy a new laptop to run 64 bit OS, but I friend told me that my current laptop is 64 bit but I am not sure how do I verify if my laptop is ready to load 64 bit OS? Here is the result from cpuz edit: come say something at less if you want to vote this down :)

  Read the article

• Initialize a static member ( an array) in C++

  - by Jimmy zhang

  I intended to create a class which only have static members and static functions. One of the member variable is an array. Would it be possible to initialize it without using constructors? I am having lots of linking errors right now... Class A{ public: static char a[128]; static void do_something(); } How would you initialize a[128]? Why can't I initialize a[128] by directly specifying its value like in C? a[128={1,2,3,...};

  Read the article

• [OpenCV] cvFilter2D works very very slow in Ubuntu 9.10 amd64?

  - by Hong

  Hi, has someone tried the cvFilter2D under 64bit linux? Recently when I was trying to port some code to the amd64 version of Ubuntu 9.10, I just found that the cvFilter2D works really slow. The version is Opencv 2.0. The code is as follows: CvMat *mat_src = cvCreateMat(128, 128, CV_32FC1); CvMat *mat_dest = cvCreateMat(128, 128, CV_32FC1); CvMat* mat_kernel = cvCreateMat( 25, 25, CV_32FC1); // initialization ... cvFilter2D( (CvMat*)mat_src, (CvMat*)mat_dest, (CvMat*)mat_kernel, cvPoint( (25-1)/2, (25-1)/2)); // I needs approximately 100ms to finish that... My CPU is Intel 2.4G However, the Opencv 1.1pre only cost me 3ms for the same code...

  Read the article

• Can I run virtualized 64-bit Operating Systems if my CPU doesn't support VT-X?

  - by tintinmj

  I have installed VMWare 10.0 workstation on my Compaq CQ60-615DX laptop. The Operating System is Windows 7 Home Premium. When I tried to run Ubuntu 14.04 64-bit in a virtual machine in VMWare I get an error saying: This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host does not support Intel VT-x. For more detailed information, see http://vmware.com/info?id=152. So I googled and found that I have to enable Intel VT-x. But I found out that my processor doesn't support Intel® Virtualization Technology (VT-x). So am I doomed and can I never run any virtual OS on my laptop? Or can I run 32-bit OSes?

  Read the article

• When encrypting data that is not an even multiple of the block size do I have to send a complete las

  - by WilliamKF

  If I am using a block cipher such as AES which has a block size of 128 bits, what do I do if my data is not an even multiple of 128 bits? I am working with packets of data and do not want to change the size of my packet when encrypting it, yet my data is not an even multiple of 128? Does the AES block cipher allow handling of a final block that is short without changing the size of my message once encrypted?

  Read the article

• int[] to string c#

  - by Robin Webdev

  Hi I'm developing an client application in C# and the server is written in c++ the server uses: inline void StrToInts(int *pInts, int Num, const char *pStr) { int Index = 0; while(Num) { char aBuf[4] = {0,0,0,0}; for(int c = 0; c < 4 && pStr[Index]; c++, Index++) aBuf[c] = pStr[Index]; *pInts = ((aBuf[0]+128)<<24)|((aBuf[1]+128)<<16)|((aBuf[2]+128)<<8)|(aBuf[3]+128); pInts++; Num--; } // null terminate pInts[-1] &= 0xffffff00; } to convert an string to int[] in my c# client i recieve: int[4] { -14240, -12938, -16988, -8832 } How do I convert the array back to an string? I don't want to use unsafe code (e.g. pointers) Any of my tries resulted in unreadable strings.

  Read the article

• How can install scripts determine which are the correct equivalents for /usr/lib for 32- and 64-bit libraries?

  - by Randalli

  I have an SDK that must install 32-bit and 64-bit files in the correct places under /usr/lib for a variety of Linux distributions. For example, it appears that for Fedora, /usr/lib64 is the 64bit lib, but for Debian based systems, /usr/lib is the 64bit directory. I want to find out if there is a reliable way to determine the correct locations. More specifically, is there a way an install script can determine programmatically which are the correct equivalents for /usr/lib for 32- and 64-bit libraries on a given distribution?

  Read the article

• Why is 64 bit Ubuntu not recomended for daily usage?

  - by REA_ANDREW

  I am just in the process of setting up a new laptop which came with Windows 7 64 bit installed. I am going to set it up to dual boot Windows 7 and Ubuntu. When I went to get the Ubuntu download I noticed that the 64 bit version is labelled with Not recomended for daily desktop usageNot recomended for daily desktop usage Why would this be? Why is 64 bit Ubuntu not recommended for daily desktop usage?

  Read the article

• Mistake in the Asc() VB function?

  - by Alexander

  Hello! Could you please tell why the Asc() function returns incorrect result? Dim TestChar = Chr(128) Dim CharInt = Asc(TestChar) ' this is a mistake on Windows 7 x64. Asc(TestChar) returns 136 instead of 128 I executed this code on another computer and the result was 128. Thanks.

  Read the article

• JUnit - assertSame

  - by Michael

  Can someone tell me why assertSame() do fail when I use values 127? import static org.junit.Assert.*; ... @Test public void StationTest1() { .. assertSame(4, 4); // OK assertSame(10, 10); // OK assertSame(100, 100); // OK assertSame(127, 127); // OK assertSame(128, 128); // raises an junit.framework.AssertionFailedError! assertSame(((int) 128),((int) 128)); // also junit.framework.AssertionFailedError! } I'm using JUnit 4.8.1.

  Read the article

• Unable to install ubuntu on a AMD 64 bit system with a AMD Radeon HD 6670 graphics card

  - by Tom Wingrove

  I’ve been running a dual boot system (Ubuntu/Windows7) for two years or so with no problems. I recently built an AMD 64 Bit System, re-installed Windows but when I went to load Ubuntu inside Windows, hit a snag. The screen view during installation became small square blocks of colour, which obviously is a graphics drive problem. I tried various live disks both 32 & 64 bit for, Ubuntu 12.04, 11.10 & 10.10, all but Ubuntu 10.10 had the same problem. Ubuntu 10.10 loaded ok, installed the presented ATI graphics driver as usual but was left with the AMD Unsupported watermark at the bottom right of the screen. The graphics card installed in the computer is an MSI ATI Radeon HD 6670 (in effect an AMD Radeon HD 6670). I am fairly new to linux and while I can install and tweak the OS, I am rather baffled as to what to do. So my question is will an up to date ATI Driver be released in the near future for installation/live disks? Or am I going to have to downgrade my graphics card to use linux? Yours Tom Wingrove

  Read the article

• Connecting debian and windows via IPsec VPN with Racoon and ipsec-tools

  - by Michi Qne

  I've some trouble with the IPsec configuration on my debian server (6 squeeze). This server should connect via IPsec VPN to an windows server, which is protected by an firewall. I've used racoon and ipsec-tools and this tutorial http://wiki.debian.org/IPsec. However, I am not quite sure, if this tutorial fits to my purpose, because of some differences: my Host and my gateway are the same server. So I don't have two different ip addresses. I guess, that's not a problem the other server is an windows system behind a firewall. Hopefully, not a problem the subnet of the windows system is /32 not /24. So I change it to /32. I worked through the tutorial step by step, but I wasn't able to route the ip. The following command didn't work for me: ip route add to 172.16.128.100/32 via XXX.XXX.XXX.XXX src XXX.XXX.XXX.XXX So I tried the following instead: ip route add to 172.16.128.100 .., which obviously not solved the problem. The next problem is the compression. The windows doesn't use a compression, but 'compression_algorithm none;' doesn't work with my racoon. So the current value is 'compression_algorithm deflate;' So my current result looks like this: When I am trying to ping the windows host (ping 172.16.128.100), I receive the following error message from ping: ping: sendmsg: Operation not permitted And racoon logs: racoon: ERROR: failed to get sainfo. After googling for a while I came to no conclusion, what's the solution. Does this error message mean that the first phase of IPsec works? I am thankful for any advice. I guess my configs might be helpful. My racoon.conf looks like this: path pre_shared_key "/etc/racoon/psk.txt"; remote YYY.YYY.YYY.YYY { exchange_mode main; proposal { lifetime time 8 hour; encryption_algorithm 3des; hash_algorithm sha1; authentication_method pre_shared_key; dh_group 2; } } sainfo address XXX.XXX.XXX.XXX/32 any address 172.16.128.100/32 any { pfs_group 2; lifetime time 8 hour; encryption_algorithm aes 256; authentication_algorithm hmac_sha1; compression_algorithm deflate; } And my ipsec-tools.conf looks like this: flush; spdflush; spdadd XXX.XXX.XXX.XXX/32 172.16.128.100/32 any -P out ipsec esp/tunnel/XXX.XXX.XXX.XXX-YYY.YYY.YYY.YYY/require; spdadd 172.16.128.100/32 XXX.XXX.XXX.XXX/32 any -P in ipsec esp/tunnel/YYY.YYY.YYY.YYY-XXX.XXX.XXX.XXX/require; If anyone has an advice, that would be awesome. Thanks in Advance. Greets, Michael It was a simple copy-and-paste error in an ip address.

  Read the article

• can't connect 2 subnets through RRAS 2008 r2

  - by mcdwight6

  I'm working on a project for a networking class. In VMWare Workstation, I have to set up a 2008 r2 server with DHCP reservations for 2 clients on separate subnets and have them ping each other. Here is the output of the route print command: =========================================================================== Interface List 13 ...00 50 56 2a e7 11 ...... Intel(R) PRO/1000 MT Network Connection #3 10 ...00 0c 29 66 88 dd ...... Intel(R) PRO/1000 MT Network Connection 1 ........................... Software Loopback Interface 1 24 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 14 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 16 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 17 ...00 00 00 00 00 00 00 e0 isatap.{5B8FB196-616F-4168-A020-03E63A309CEC} =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.0.2 266 0.0.0.0 0.0.0.0 On-link 223.6.6.2 266 10.0.0.0 255.0.0.0 On-link 10.0.0.2 266 10.0.0.2 255.255.255.255 On-link 10.0.0.2 266 10.255.255.255 255.255.255.255 On-link 10.0.0.2 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.6.0.0 255.255.0.0 On-link 10.0.0.2 11 128.6.255.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.0 255.255.255.0 On-link 10.0.0.2 11 223.6.6.0 255.255.255.0 On-link 223.6.6.2 266 223.6.6.2 255.255.255.255 On-link 223.6.6.2 266 223.6.6.255 255.255.255.255 On-link 10.0.0.2 266 223.6.6.255 255.255.255.255 On-link 223.6.6.2 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.0.2 266 224.0.0.0 240.0.0.0 On-link 223.6.6.2 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.0.2 266 255.255.255.255 255.255.255.255 On-link 223.6.6.2 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.0.0.2 Default 0.0.0.0 0.0.0.0 128.6.0.2 Default 0.0.0.0 0.0.0.0 223.6.6.2 Default 128.6.0.0 255.255.0.0 10.0.0.2 1 223.6.6.0 255.255.255.0 10.0.0.2 1 =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 1010 2002::/16 On-link 14 266 2002:8006:2::8006:2/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None My problem is that although I have set up both dynamic and persistent static routes in my r2 server, neither of the clients can ping even the NIC outside its own subnet. For example Client A can ping the NIC at 10.0.0.2 and vice-versa, but it gets a general transmit failure when it tries to ping the card at 223.6.6.2, let alone trying to ping the other client. I have completely disabled the firewalls on all machines and anything else I could think of, without success. What am I missing? Edit: Since posting this, I also noticed that the default gateways on my 2 NICs keep getting zeroed out. Does anyone know a fix for this?

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >