Search Results

Search found 2023 results on 81 pages for 'compatibility'.

Page 69/81 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

  • OpenSSH (Windows) does not forward X11

    - by Shulhi Sapli
    I'm running Ubuntu 13.04 in VM and I wanted to do X11 forwarding to my host (Win 8), so far it works fine using PuTTY and XMing server for Windows. But I am curious why it doesn't work if I use OpenSSH binaries (it comes together with Git for windows). This is what I've done so far: ssh -X [email protected] (also tried with -Y) then gedit but received error of Cannot open display. echo $DISPLAY came out as empty. So, I try to export DISPLAY=localhost:0.0 but it still won't work. The DISPLAY environment that I set is exactly as when it runs with Putty. I also try changing the DISPLAY to 192.168.2.3:0.0 and other display number as well, but still it won't work. Of course I could just use Putty to make it work, but I was wondering why OpenSSH binaries does not work. I have enabled all settings required in both /etc/ssh/ssh_config and /etc/ssh/sshd_config. If I run with -v option, this is what I get F:\SkyDrive\Projects> ssh -X -v [email protected] OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Connecting to 192.168.2.3 [192.168.2.3] port 22. debug1: Connection established. debug1: identity file /c/Users/Shulhi/.ssh/identity type -1 debug1: identity file /c/Users/Shulhi/.ssh/id_rsa type -1 debug1: identity file /c/Users/Shulhi/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1p1 Debian-4 debug1: match: OpenSSH_6.1p1 Debian-4 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.2.3' is known and matches the RSA host key. debug1: Found key in /c/Users/Shulhi/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /c/Users/Shulhi/.ssh/identity debug1: Trying private key: /c/Users/Shulhi/.ssh/id_rsa debug1: Next authentication method: password [email protected]'s password: It seems that there is no request for X11 (I'm not sure if there is should be one too here). Any pointers why it doesn't work?

    Read the article

  • Why isn't passwordless ssh working?

    - by Nelson
    I have two Ubuntu Server machines sitting at home. One is 192.168.1.15 (we'll call this 15), and the other is 192.168.1.25 (we'll call this 25). For some reason, when I want to setup passwordless login from 15 to 25, it works like a champ. When I repeat the steps on 25, so that 25 can login without a password on 15, no dice. I have checked both sshd_config files. Both have: RSAAuthentication yes PubkeyAuthentication yes I have checked permissions on both servers: drwx------ 2 bion2 bion2 4096 Dec 4 12:51 .ssh -rw------- 1 bion2 bion2 398 Dec 4 13:10 authorized_keys On 25. drwx------ 2 shimdidly shimdidly 4096 Dec 4 19:15 .ssh -rw------- 1 shimdidly shimdidly 1018 Dec 4 18:54 authorized_keys On 15. I just don't understand when things would work one way and not the other. I know it's probably something obvious just staring me in the face, but for the life of me, I can't figure out what is going on. Here's what ssh -v says when I try to ssh from 25 to 15: ssh -v -p 51337 192.168.1.15 OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to 192.168.1.15 [192.168.1.15] port 51337. debug1: Connection established. debug1: identity file /home/shimdidly/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file /home/shimdidly/.ssh/id_rsa-cert type -1 debug1: identity file /home/shimdidly/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: identity file /home/shimdidly/.ssh/id_dsa-cert type -1 debug1: identity file /home/shimdidly/.ssh/id_ecdsa type -1 debug1: identity file /home/shimdidly/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 54:5c:60:80:74:ab:ab:31:36:a1:d3:9b:db:31:2a:ee debug1: Host '[192.168.1.15]:51337' is known and matches the ECDSA host key. debug1: Found key in /home/shimdidly/.ssh/known_hosts:2 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/shimdidly/.ssh/id_rsa debug1: Authentications that can continue: publickey,password debug1: Offering DSA public key: /home/shimdidly/.ssh/id_dsa debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/shimdidly/.ssh/id_ecdsa debug1: Next authentication method: password

    Read the article

  • SQL Express 2008 R2 on Amazon EC2 instance: tons of free memory, poor performance

    - by gravyface
    The old SQL Express 2005 was running on a low-end single Xeon CPU Dell server, RAID 5 7200 disks, 2 GB RAM (SBS 2003). I have not done any baseline measurements on the old physical server, but the Web app is used by half a dozen people (maybe 2 concurrently), so I figured "how bad can an Amazon EC2 instance be?". It's pretty horrible: a difference of 8 seconds of load time on one screen. First of all, I'm not a SQL guru, but here's what I've tried: Had a Small Instance, now running a c1.medium (High Cpu Medium) Windows 2008 32-bit R2 EBS-backed instance running IIS 7.5 and SQL Express 2008 R2. No noticeable improvement. Changed Page File from fixed 256 to Automatic. Setup a Striped Mirror from within Disk Management with two attached 1 GB EBS volumes. Moved database and transaction log, left everything else on the boot EBS volume. No noticeable change. Looked at memory, ~1000 MB of physical memory free (1.7 GB total). Changed SQL instance to use a minimum of 1024 RAM; restarted server, no change in memory usage. SQL still only using ~28MB of RAM(!). So I'm thinking: this database is tiny (28MB), why isn't the whole thing cached in RAM? Surely that would speed up performance. The transaction log is 241 MB. Seems kind of large in comparison -- has this not been committed? Is it a cause of performance degradation? I recall something about Recovery Models and log sizes somewhere in my travels, but not positive. Another thing: the old server was running SQL Express 2005. Not sure if that has any impact, but I tried changing the compatibility level from SQL 2000 to 2008, but that had no effect. Anyways, what else can I try here? Seems ridiculous to throw more virtual hardware at this thing. I know I/O is going to be rough on EBS volumes, but surely others are successfully running small .NET/SQL apps on reasonably priced instances?

    Read the article

  • strange sqares like hints in Silverlight application?

    - by lina
    Good day! Strange square appears on mouse hover on text boxes, buttons, etc (something like hint) in a silverlight navigation application - how can I remove it? a scrin shot an example .xaml page: <Code:BasePage x:Class="CAP.Views.Main" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:navigation="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Navigation" xmlns:Code="clr-namespace:CAP.Code" d:DesignWidth="640" d:DesignHeight="480" Title="?????? ??????? ???????? ??? ?????"> <Grid x:Name="LayoutRoot"> <Grid.RowDefinitions> <RowDefinition Height="103*" /> <RowDefinition Height="377*" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="120*" /> <ColumnDefinition Width="520*" /> </Grid.ColumnDefinitions> <Image Height="85" HorizontalAlignment="Left" Name="image1" Stretch="Fill" VerticalAlignment="Top" Width="84" Margin="12,0,0,0" ImageFailed="image1_ImageFailed" Source="/CAP;component/Images/My-Computer.png" /> <TextBlock Grid.Column="1" Height="Auto" TextWrapping="Wrap" HorizontalAlignment="Left" Margin="0,12,0,0" Name="textBlock1" Text="Good day!" VerticalAlignment="Top" FontFamily="Verdana" FontSize="16" Width="345" FontWeight="Bold" /> <TextBlock Grid.Column="1" Grid.Row="1" TextWrapping="Wrap" Height="299" HorizontalAlignment="Left" Name="textBlock2" VerticalAlignment="Top" FontFamily="Verdana" FontSize="14" Width="441" > <Run Text="Some text "/><LineBreak/><LineBreak/><Run Text="and so on"/> <LineBreak/> </TextBlock> </Grid> xaml.cs: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Windows.Navigation; using CAP.Code; namespace CAP.Views { public partial class Main : BasePage { public Main() : base() { InitializeComponent(); MapBuilder.AddToMap(new SiteMapUnit() { Caption = "???????", RelativeUrl = "Main" },true); ((App)Application.Current).Mainpage.tvMainMenu.SelectedItems.Clear(); } // Executes when the user navigates to this page. protected override void OnNavigatedTo(NavigationEventArgs e) { } private void image1_ImageFailed(object sender, ExceptionRoutedEventArgs e) { } protected override string[] NeededPermission() { return new string[0]; } } } MainPage.xaml <UserControl x:Class="CAP.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Code="clr-namespace:CAP.Code" xmlns:navigation="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Navigation" xmlns:uriMapper="clr-namespace:System.Windows.Navigation;assembly=System.Windows.Controls.Navigation" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:telerik="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls" xmlns:telerikNavigation="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation" mc:Ignorable="d" Margin="0,0,0,0" Width="auto" Height="auto" xmlns:dataInput="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Data.Input"> <ScrollViewer Width="auto" Height="auto" BorderBrush="White" BorderThickness="0" Margin="0,0,0,0" x:Name="sV" HorizontalScrollBarVisibility="Auto" VerticalScrollBarVisibility="Auto" > <ScrollViewer.Content> <Grid Width="auto" Height="auto" x:Name="LayoutRoot" Style="{StaticResource LayoutRootGridStyle}" Margin="0,0,0,0"> <StackPanel Width="auto" Height="auto" Orientation="Vertical" Margin="250,0,0,50"> <Border x:Name="ContentBorder2" Margin="0,0,0,0" > <!--<navigation:Frame Margin="0,0,0,0" Width="auto" Height="auto" x:Name="AnotherFrame" VerticalAlignment="Top" Style="{StaticResource ContentFrameStyle}" Source="/Views/Menu.xaml" NavigationFailed="ContentFrame_NavigationFailed" JournalOwnership="OwnsJournal" Loaded="AnotherFrame_Loaded"> </navigation:Frame>--> <StackPanel Orientation="Vertical" Height="82" Width="Auto" HorizontalAlignment="Right" Margin="0,0,0,0" DataContext="{Binding}"> <TextBlock HorizontalAlignment="Right" Foreground="White" x:Name="ApplicationNameTextBlock4" Style="{StaticResource ApplicationNameStyle}" FontSize="20" Text="?????? ???????" Margin="20,16,20,0"/> <StackPanel Orientation="Horizontal" HorizontalAlignment="Right"> <Image x:Name="imDoor" Visibility="Collapsed" MouseEnter="imDoor_MouseEnter" MouseLeave="imDoor_MouseLeave" Height="24" Stretch="Fill" Width="25" Margin="10,0,10,0" Source="/CAP;component/Images/sm_white_doors.png" MouseLeftButtonDown="bTest_Click" /> <TextBlock x:Name="bLogout" MouseEnter="bLogout_MouseEnter" MouseLeave="bLogout_MouseLeave" TextDecorations="Underline" Margin="0,6,20,4" Height="23" Text="?????" HorizontalAlignment="Right" Visibility="Collapsed" MouseLeftButtonDown="bTest_Click" FontFamily="Verdana" FontSize="13" FontWeight="Normal" Foreground="#FF1C1C92" /> </StackPanel> </StackPanel> </Border> <Border x:Name="bSiteMap" Margin="0,0,0,0" > <StackPanel x:Name="spSiteMap" Orientation="Horizontal" Height="20" Width="Auto" HorizontalAlignment="Left" Margin="0,0,0,0" DataContext="{Binding}"> <!-- <TextBlock Visibility="Visible" TextDecorations="Underline" Height="23" HorizontalAlignment="Left" x:Name="ar" Text="1" VerticalAlignment="Top" Foreground="Blue" FontFamily="Verdana" FontSize="13" /> <TextBlock Visibility="Visible" Height="23" HorizontalAlignment="Left" x:Name="Map" Text="->" VerticalAlignment="Top" Foreground="Blue" FontFamily="Verdana" FontSize="13" /> <TextBlock Visibility="Visible" TextDecorations="Underline" Height="23" HorizontalAlignment="Left" x:Name="ar1" Text="2" VerticalAlignment="Top" Foreground="Blue" FontFamily="Verdana" FontSize="13" /> <TextBlock Visibility="Visible" Height="23" HorizontalAlignment="Left" x:Name="Map1" Text="->" VerticalAlignment="Top" Foreground="Blue" FontFamily="Verdana" FontSize="13" /> <TextBlock Visibility="Visible" TextDecorations="Underline" Height="23" HorizontalAlignment="Left" x:Name="ar2" Text="3" VerticalAlignment="Top" Foreground="Blue" FontFamily="Verdana" FontSize="13" />--> </StackPanel> </Border> <Border Width="auto" Height="auto" x:Name="ContentBorder" Margin="0,0,0,0" > <navigation:Frame x:Name="ContentFrame" Style="{StaticResource ContentFrameStyle}" Source="Main" Navigated="ContentFrame_Navigated" NavigationFailed="ContentFrame_NavigationFailed" ToolTipService.ToolTip=" " Margin="0,0,0,0"> <navigation:Frame.UriMapper> <uriMapper:UriMapper> <!--Client--> <uriMapper:UriMapping Uri="RegistrateClient" MappedUri="/Views/Client/RegistrateClient.xaml"/> <!--So on--> </uriMapper:UriMapper> </navigation:Frame.UriMapper> </navigation:Frame> </Border> </StackPanel> <Grid x:Name="NavigationGrid" Style="{StaticResource NavigationGridStyle}" Margin="0,0,0,0" Background="{x:Null}" > <StackPanel Orientation="Vertical" Height="Auto" Width="250" HorizontalAlignment="Center" Margin="0,0,0,50" DataContext="{Binding}"> <Image Width="150" Height="90" HorizontalAlignment="Center" VerticalAlignment="Top" Source="/CAP;component/Images/logo__au.png" Margin="0,20,0,70"/> <Border x:Name="BrandingBorder" MinHeight="222" Width="250" Style="{StaticResource BrandingBorderStyle3}" HorizontalAlignment="Center" Opacity="60" Margin="0,0,0,0"> <Border.Background> <ImageBrush ImageSource="/CAP;component/Images/papka.png"/> </Border.Background> <Grid Width="250" x:Name="LichniyCabinet" Margin="0,10,0,0" HorizontalAlignment="Center" Height="211"> <Grid.ColumnDefinitions> <ColumnDefinition Width="19*" /> <ColumnDefinition Width="62*" /> <ColumnDefinition Width="151*" /> <ColumnDefinition Width="18*" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="13" /> <RowDefinition Height="24" /> <RowDefinition Height="35" /> <RowDefinition Height="35" /> <RowDefinition Height="43" /> <RowDefinition Height="28" /> <RowDefinition Height="32*" /> </Grid.RowDefinitions> <TextBlock Visibility="Visible" Grid.Row="2" Height="23" HorizontalAlignment="Left" x:Name="tLogin" Text="?????" VerticalAlignment="Top" FontFamily="Verdana" FontSize="13" Foreground="White" Margin="1,0,0,0" Grid.Column="1" /> <TextBlock Visibility="Visible" FontFamily="Verdana" FontSize="13" Foreground="White" Height="23" HorizontalAlignment="Left" x:Name="tPassw" Text="??????" VerticalAlignment="Top" Grid.Row="3" Grid.Column="1" /> <TextBox Visibility="Visible" Grid.Column="2" Grid.Row="2" Height="24" HorizontalAlignment="Left" x:Name="logLogin" VerticalAlignment="Top" Width="150" /> <PasswordBox Visibility="Visible" Code:DefaultButtonService.DefaultButton="{Binding ElementName=bLogin}" PasswordChar="*" Height="24" HorizontalAlignment="Left" x:Name="logPassword" VerticalAlignment="Top" Width="150" Grid.Column="2" Grid.Row="3" /> <Button x:Name="bLogin" MouseEnter="bLogin_MouseEnter" MouseLeave="bLogin_MouseLeave" Visibility="Visible" Content="?????" Grid.Column="2" Grid.Row="4" Click="Button_Click" Height="23" HorizontalAlignment="Left" Margin="81,0,0,0" VerticalAlignment="Top" Width="70" /> <TextBlock MouseLeftButtonDown="ForgotPassword_MouseLeftButtonDown" MouseEnter="ForgotPassword_MouseEnter" MouseLeave="ForgotPassword_MouseLeave" Visibility="Visible" TextDecorations="Underline" Grid.ColumnSpan="2" Grid.Row="4" Height="23" HorizontalAlignment="Left" x:Name="ForgotPassword" Text="?????? ???????" VerticalAlignment="Top" Foreground="White" FontFamily="Verdana" FontSize="13" Grid.Column="1" /> <TextBlock MouseEnter="tbRegistration_MouseEnter" MouseLeave="tbRegistration_MouseLeave" MouseLeftButtonDown="tbRegistration_MouseLeftButtonDown" Grid.Column="2" Grid.Row="6" Height="23" x:Name="tbRegistration" TextDecorations="Underline" Text="???????????" VerticalAlignment="Top" FontFamily="Verdana" FontSize="13" TextAlignment="Center" HorizontalAlignment="Center" Foreground="#FF1C1C92" FontWeight="Normal" Margin="0,0,57,0" /> <TextBlock Cursor="Arrow" Height="23" HorizontalAlignment="Left" Margin="11,-3,0,0" Text="?????? ???????" VerticalAlignment="Top" Grid.ColumnSpan="3" Grid.RowSpan="2" FontFamily="Verdana" FontSize="13" FontWeight="Bold" Foreground="White" /> <Image Visibility="Collapsed" Height="70" x:Name="imUser" Stretch="Fill" Width="70" Grid.ColumnSpan="2" Margin="11,0,0,0" Grid.Row="2" Grid.RowSpan="2" Source="/CAP;component/Images/user2.png" /> <TextBlock x:Name="tbHello" Grid.Column="2" Visibility="Collapsed" Grid.Row="2" Height="auto" TextWrapping="Wrap" HorizontalAlignment="Left" Margin="6,0,0,0" Text="" VerticalAlignment="Top" FontFamily="Verdana" FontSize="13" Foreground="White" Width="145" /> </Grid> </Border> <Border x:Name="MenuBorder" Margin="0,0,0,50" Width="250" Visibility="Collapsed"> <StackPanel x:Name="spMenu" Width="240" HorizontalAlignment="Left"> <telerikNavigation:RadTreeView x:Name="tvMainMenu" Width="240" Selected="TreeView1_Selected" SelectedValuePath="Text" telerik:Theming.Theme="Windows7" FontFamily="Verdana" FontSize="12"/> </StackPanel> </Border> </StackPanel> </Grid> <Border x:Name="FooterBorder" VerticalAlignment="Bottom" Width="auto" Height="76"> <Border.Background> <ImageBrush ImageSource="/CAP;component/Images/footer2.png" /> </Border.Background> <TextBlock x:Name="tbFooter" Height="24" Width="auto" Margin="0,20,0,0" TextAlignment="Center" HorizontalAlignment="Stretch" VerticalAlignment="Center" Foreground="White" FontFamily="Verdana" FontSize="11"> </TextBlock> </Border> </Grid> </ScrollViewer.Content> </ScrollViewer> </UserControl> MainPage.xaml.cs using System; using System.Collections.Generic; using System.Linq; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Navigation; using CAP.Code; using CAP.Registrator; using System.Windows.Input; using System.ComponentModel.DataAnnotations; using System.Windows.Browser; using Telerik.Windows.Controls; using System.Net; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Navigation; using System.Windows.Shapes; namespace CAP { public partial class MainPage { public App Appvars = Application.Current as App; private readonly RegistratorClient registrator; public SiteMapBuilder builder; public MainPage() { InitializeComponent(); sV.SetIsMouseWheelScrollingEnabled(true); builder = new SiteMapBuilder(spSiteMap); try { //working with service } catch { this.ContentFrame.Navigate(new Uri(String.Format("ErrorPage"), UriKind.RelativeOrAbsolute)); } } /// Recursive method to update the correct scrollviewer (if exists) private ScrollViewer CheckParent(FrameworkElement element) { ScrollViewer _result = element as ScrollViewer; if (element != null && _result == null) { FrameworkElement _temp = element.Parent as FrameworkElement; _result = CheckParent(_temp); } return _result; } // If an error occurs during navigation, show an error window private void ContentFrame_NavigationFailed(object sender, NavigationFailedEventArgs e) { e.Handled = true; ChildWindow errorWin = new ErrorWindow(e.Uri); errorWin.Show(); } } }

    Read the article

  • Blending the Sketchflow Action

    - by GeekAgilistMercenary
    Started a new Sketchflow Prototype in Expression Blend recently and documented each of the steps.  This blog entry covers some of those steps, which are the basic elements of any prototype.  I will have more information regarding design, prototype creation, and the process of the initial phases for development in the future.  For now, I hope you enjoy this short walk through.  Also, be sure to check out my last quick entry on Sketchflow. I started off with a Sketchflow Project, just like I did in my previous entry (more specifics in that entry about how to manipulate and build out the Sketchflow Map). Once I created the project I setup the following Sketchflow Map. The CoreNavigation is a ComponentScreen setup solely for the page navigation at the top of the screen.  The XAML markup in case you want to create a Component Screen with the same design is included below. <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity" xmlns:pb="clr-namespace:Microsoft.Expression.Prototyping.Behavior;assembly=Microsoft.Expression.Prototyping.Interactivity" x:Class="RapidPrototypeSketchScreens.CoreNavigation" d:DesignWidth="624" d:DesignHeight="49" Height="49" Width="624">   <Grid x:Name="LayoutRoot"> <TextBlock HorizontalAlignment="Stretch" Margin="307,3,0,0" Style="{StaticResource TitleCenter-Sketch}" Text="Aütøchart Scorecards" TextWrapping="Wrap"> <i:Interaction.Triggers> <i:EventTrigger EventName="MouseLeftButtonDown"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1"/> </i:EventTrigger> </i:Interaction.Triggers> </TextBlock> <Button HorizontalAlignment="Left" Margin="164,8,0,11" Style="{StaticResource Button-Sketch}" Width="144" Content="Scorecard"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1_2"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> <Button HorizontalAlignment="Left" Margin="8,8,0,11" Style="{StaticResource Button-Sketch}" Width="152" Content="Standard Reports"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1_1"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> </Grid> </UserControl> Now that the CoreNavigation Component Screen is done I built out each of the others.  In each of those screens I included the CoreNavigation Screen (all those little green lines in the image) as the top navigation.  In order to do that, as I created each of the pages I would hover over the CoreNavigation Object in the Sketchflow Map.  When the utilities drawer (the small menu that pops down under a node when you hover over it) shows click on the third little icon and drag it onto the page node you want a navigation screen on. Once I created all the screens I setup the navigation by opening up each screen and right clicking on the objects that needed to point to somewhere else in the prototype. Once I was done with the main page, my Home Navigation Page, it looked something like this in the Expression Blend Designer. I fleshed out each of the additional screens.  Once I was done I wanted to try out the deployment package.  The way to deploy a Sketchflow Prototype is to merely click on File –> Package SketchFlow Project and a prompt will appear.  In the prompt enter what you want the package to be called. I like to see the files generated afterwards too, so I checked the box to see that.  When Expression Blend is done generating everything you’ll have a directory like the one shown below, with all the needed files for deployment. Now these files can be copied or moved to any location for viewing.  One can even copy them (such as via FTP) to a server location to share with others.  Once they are deployed and you run the "TestPage.html" the other features of the Sketchflow Package are available. In the image below I have tagged a few sections to show the Sketchflow Player Features.  To the top left is the navigation, which provides a clearly defined area of movement in a list.  To the center right is the actual prototype application.  I have placed lists of things and made edits.  On the left hand side is the highlight feature, which is available in the Feedback section of the lower left.  On the right hand list I underlined the Autochart with an orange marker, and marked out two list items with a red marker. In the lower left hand side in the Feedback section is also an area to type in your feedback.  This can be useful for time based feedback, when you post this somewhere and want people to provide subsequent follow up feedback. Overall lots of great features, that enable some fairly rapid prototyping with customers.  Once one is familiar with the steps and parts of this Sketchflow Prototype Capabilities it is easy to step through an application without even stopping.  It really is that easy.  So get hold of Expression Blend 3 and get ramped up on Sketchflow, it will pay off in the design phases to do so! Original Entry

    Read the article

  • SQL SERVER – Simple Example of Snapshot Isolation – Reduce the Blocking Transactions

    - by pinaldave
    To learn any technology and move to a more advanced level, it is very important to understand the fundamentals of the subject first. Today, we will be talking about something which has been quite introduced a long time ago but not properly explored when it comes to the isolation level. Snapshot Isolation was introduced in SQL Server in 2005. However, the reality is that there are still many software shops which are using the SQL Server 2000, and therefore cannot be able to maintain the Snapshot Isolation. Many software shops have upgraded to the later version of the SQL Server, but their respective developers have not spend enough time to upgrade themselves with the latest technology. “It works!” is a very common answer of many when they are asked about utilizing the new technology, instead of backward compatibility commands. In one of the recent consultation project, I had same experience when developers have “heard about it” but have no idea about snapshot isolation. They were thinking it is the same as Snapshot Replication – which is plain wrong. This is the same demo I am including here which I have created for them. In Snapshot Isolation, the updated row versions for each transaction are maintained in TempDB. Once a transaction has begun, it ignores all the newer rows inserted or updated in the table. Let us examine this example which shows the simple demonstration. This transaction works on optimistic concurrency model. Since reading a certain transaction does not block writing transaction, it also does not block the reading transaction, which reduced the blocking. First, enable database to work with Snapshot Isolation. Additionally, check the existing values in the table from HumanResources.Shift. ALTER DATABASE AdventureWorks SET ALLOW_SNAPSHOT_ISOLATION ON GO SELECT ModifiedDate FROM HumanResources.Shift GO Now, we will need two different sessions to prove this example. First Session: Set Transaction level isolation to snapshot and begin the transaction. Update the column “ModifiedDate” to today’s date. -- Session 1 SET TRANSACTION ISOLATION LEVEL SNAPSHOT BEGIN TRAN UPDATE HumanResources.Shift SET ModifiedDate = GETDATE() GO Please note that we have not yet been committed to the transaction. Now, open the second session and run the following “SELECT” statement. Then, check the values of the table. Please pay attention on setting the Isolation level for the second one as “Snapshot” at the same time when we already start the transaction using BEGIN TRAN. -- Session 2 SET TRANSACTION ISOLATION LEVEL SNAPSHOT BEGIN TRAN SELECT ModifiedDate FROM HumanResources.Shift GO You will notice that the values in the table are still original values. They have not been modified yet. Once again, go back to session 1 and begin the transaction. -- Session 1 COMMIT After that, go back to Session 2 and see the values of the table. -- Session 2 SELECT ModifiedDate FROM HumanResources.Shift GO You will notice that the values are yet not changed and they are still the same old values which were there right in the beginning of the session. Now, let us commit the transaction in the session 2. Once committed, run the same SELECT statement once more and see what the result is. -- Session 2 COMMIT SELECT ModifiedDate FROM HumanResources.Shift GO You will notice that it now reflects the new updated value. I hope that this example is clear enough as it would give you good idea how the Snapshot Isolation level works. There is much more to write about an extra level, READ_COMMITTED_SNAPSHOT, which we will be discussing in another post soon. If you wish to use this transaction’s Isolation level in your production database, I would appreciate your comments about their performance on your servers. I have included here the complete script used in this example for your quick reference. ALTER DATABASE AdventureWorks SET ALLOW_SNAPSHOT_ISOLATION ON GO SELECT ModifiedDate FROM HumanResources.Shift GO -- Session 1 SET TRANSACTION ISOLATION LEVEL SNAPSHOT BEGIN TRAN UPDATE HumanResources.Shift SET ModifiedDate = GETDATE() GO -- Session 2 SET TRANSACTION ISOLATION LEVEL SNAPSHOT BEGIN TRAN SELECT ModifiedDate FROM HumanResources.Shift GO -- Session 1 COMMIT -- Session 2 SELECT ModifiedDate FROM HumanResources.Shift GO -- Session 2 COMMIT SELECT ModifiedDate FROM HumanResources.Shift GO Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Transaction Isolation

    Read the article

  • jQuery 1.4 Opacity and IE Filters

    - by Rick Strahl
    Ran into a small problem today with my client side jQuery library after switching to jQuery 1.4. I ran into a problem with a shadow plugin that I use to provide drop shadows for absolute elements – for Mozilla WebKit browsers the –moz-box-shadow and –webkit-box-shadow CSS attributes are used but for IE a manual element is created to provide the shadow that underlays the original element along with a blur filter to provide the fuzziness in the shadow. Some of the key pieces are: var vis = el.is(":visible"); if (!vis) el.show(); // must be visible to get .position var pos = el.position(); if (typeof shEl.style.filter == "string") sh.css("filter", 'progid:DXImageTransform.Microsoft.Blur(makeShadow=true, pixelradius=3, shadowOpacity=' + opt.opacity.toString() + ')'); sh.show() .css({ position: "absolute", width: el.outerWidth(), height: el.outerHeight(), opacity: opt.opacity, background: opt.color, left: pos.left + opt.offset, top: pos.top + opt.offset }); This has always worked in previous versions of jQuery, but with 1.4 the original filter no longer works. It appears that applying the opacity after the original filter wipes out the original filter. IOW, the opacity filter is not applied incrementally, but absolutely which is a real bummer. Luckily the workaround is relatively easy by just switching the order in which the opacity and filter are applied. If I apply the blur after the opacity I get my correct behavior back with both opacity: sh.show() .css({ position: "absolute", width: el.outerWidth(), height: el.outerHeight(), opacity: opt.opacity, background: opt.color, left: pos.left + opt.offset, top: pos.top + opt.offset }); if (typeof shEl.style.filter == "string") sh.css("filter", 'progid:DXImageTransform.Microsoft.Blur(makeShadow=true, pixelradius=3, shadowOpacity=' + opt.opacity.toString() + ')'); While this works this still causes problems in other areas where opacity is implicitly set in code such as for fade operations or in the case of my shadow component the style/property watcher that keeps the shadow and main object linked. Both of these may set the opacity explicitly and that is still broken as it will effectively kill the blur filter. This seems like a really strange design decision by the jQuery team, since clearly the jquery css function does the right thing for setting filters. Internally however, the opacity setting doesn’t use .css instead hardcoding the filter which given jQuery’s usual flexibility and smart code seems really inappropriate. The following is from jQuery.js 1.4: var style = elem.style || elem, set = value !== undefined; // IE uses filters for opacity if ( !jQuery.support.opacity && name === "opacity" ) { if ( set ) { // IE has trouble with opacity if it does not have layout // Force it by setting the zoom level style.zoom = 1; // Set the alpha filter to set the opacity var opacity = parseInt( value, 10 ) + "" === "NaN" ? "" : "alpha(opacity=" + value * 100 + ")"; var filter = style.filter || jQuery.curCSS( elem, "filter" ) || ""; style.filter = ralpha.test(filter) ? filter.replace(ralpha, opacity) : opacity; } return style.filter && style.filter.indexOf("opacity=") >= 0 ? (parseFloat( ropacity.exec(style.filter)[1] ) / 100) + "": ""; } You can see here that the style is explicitly set in code rather than relying on $.css() to assign the value resulting in the old filter getting wiped out. jQuery 1.32 looks a little different: // IE uses filters for opacity if ( !jQuery.support.opacity && name == "opacity" ) { if ( set ) { // IE has trouble with opacity if it does not have layout // Force it by setting the zoom level elem.zoom = 1; // Set the alpha filter to set the opacity elem.filter = (elem.filter || "").replace( /alpha\([^)]*\)/, "" ) + (parseInt( value ) + '' == "NaN" ? "" : "alpha(opacity=" + value * 100 + ")"); } return elem.filter && elem.filter.indexOf("opacity=") >= 0 ? (parseFloat( elem.filter.match(/opacity=([^)]*)/)[1] ) / 100) + '': ""; } Offhand I’m not sure why the latter works better since it too is assigning the filter. However, when checking with the IE script debugger I can see that there are actually a couple of filter tags assigned when using jQuery 1.32 but only one when I use jQuery 1.4. Note also that the jQuery 1.3 compatibility plugin for jQUery 1.4 doesn’t address this issue either. Resources ww.jquery.js (shadow plug-in $.fn.shadow) © Rick Strahl, West Wind Technologies, 2005-2010Posted in jQuery  

    Read the article

  • SQL SERVER – Simple Example of Snapshot Isolation – Reduce the Blocking Transactions

    - by pinaldave
    To learn any technology and move to a more advanced level, it is very important to understand the fundamentals of the subject first. Today, we will be talking about something which has been quite introduced a long time ago but not properly explored when it comes to the isolation level. Snapshot Isolation was introduced in SQL Server in 2005. However, the reality is that there are still many software shops which are using the SQL Server 2000, and therefore cannot be able to maintain the Snapshot Isolation. Many software shops have upgraded to the later version of the SQL Server, but their respective developers have not spend enough time to upgrade themselves with the latest technology. “It works!” is a very common answer of many when they are asked about utilizing the new technology, instead of backward compatibility commands. In one of the recent consultation project, I had same experience when developers have “heard about it” but have no idea about snapshot isolation. They were thinking it is the same as Snapshot Replication – which is plain wrong. This is the same demo I am including here which I have created for them. In Snapshot Isolation, the updated row versions for each transaction are maintained in TempDB. Once a transaction has begun, it ignores all the newer rows inserted or updated in the table. Let us examine this example which shows the simple demonstration. This transaction works on optimistic concurrency model. Since reading a certain transaction does not block writing transaction, it also does not block the reading transaction, which reduced the blocking. First, enable database to work with Snapshot Isolation. Additionally, check the existing values in the table from HumanResources.Shift. ALTER DATABASE AdventureWorks SET ALLOW_SNAPSHOT_ISOLATION ON GO SELECT ModifiedDate FROM HumanResources.Shift GO Now, we will need two different sessions to prove this example. First Session: Set Transaction level isolation to snapshot and begin the transaction. Update the column “ModifiedDate” to today’s date. -- Session 1 SET TRANSACTION ISOLATION LEVEL SNAPSHOT BEGIN TRAN UPDATE HumanResources.Shift SET ModifiedDate = GETDATE() GO Please note that we have not yet been committed to the transaction. Now, open the second session and run the following “SELECT” statement. Then, check the values of the table. Please pay attention on setting the Isolation level for the second one as “Snapshot” at the same time when we already start the transaction using BEGIN TRAN. -- Session 2 SET TRANSACTION ISOLATION LEVEL SNAPSHOT BEGIN TRAN SELECT ModifiedDate FROM HumanResources.Shift GO You will notice that the values in the table are still original values. They have not been modified yet. Once again, go back to session 1 and begin the transaction. -- Session 1 COMMIT After that, go back to Session 2 and see the values of the table. -- Session 2 SELECT ModifiedDate FROM HumanResources.Shift GO You will notice that the values are yet not changed and they are still the same old values which were there right in the beginning of the session. Now, let us commit the transaction in the session 2. Once committed, run the same SELECT statement once more and see what the result is. -- Session 2 COMMIT SELECT ModifiedDate FROM HumanResources.Shift GO You will notice that it now reflects the new updated value. I hope that this example is clear enough as it would give you good idea how the Snapshot Isolation level works. There is much more to write about an extra level, READ_COMMITTED_SNAPSHOT, which we will be discussing in another post soon. If you wish to use this transaction’s Isolation level in your production database, I would appreciate your comments about their performance on your servers. I have included here the complete script used in this example for your quick reference. ALTER DATABASE AdventureWorks SET ALLOW_SNAPSHOT_ISOLATION ON GO SELECT ModifiedDate FROM HumanResources.Shift GO -- Session 1 SET TRANSACTION ISOLATION LEVEL SNAPSHOT BEGIN TRAN UPDATE HumanResources.Shift SET ModifiedDate = GETDATE() GO -- Session 2 SET TRANSACTION ISOLATION LEVEL SNAPSHOT BEGIN TRAN SELECT ModifiedDate FROM HumanResources.Shift GO -- Session 1 COMMIT -- Session 2 SELECT ModifiedDate FROM HumanResources.Shift GO -- Session 2 COMMIT SELECT ModifiedDate FROM HumanResources.Shift GO Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Transaction Isolation

    Read the article

  • .NET 3.5 Installation Problems in Windows 8

    - by Rick Strahl
    Windows 8 installs with .NET 4.5. A default installation of Windows 8 doesn't seem to include .NET 3.0 or 3.5, although .NET 2.0 does seem to be available by default (presumably because Windows has app dependencies on that). I ran into some pretty nasty compatibility issues regarding .NET 3.5 which I'll describe in this post. I'll preface this by saying that depending on how you install Windows 8 you may not run into these issues. In fact, it's probably a special case, but one that might be common with developer folks reading my blog. Specifically it's the install order that screwed things up for me -  installing Visual Studio before explicitly installing .NET 3.5 from Windows Features - in particular. If you install Visual Studio 2010 I highly recommend you install .NET 3.5 from Windows features BEFORE you install Visual Studio 2010 and save yourself the trouble I went through. So when I installed Windows 8, and then looked at the Windows Features to install after the fact in the Windows Feature dialog, I thought - .NET 3.5 - who needs it. I'd be happy to not have to install .NET 3.5, but unfortunately I found out quite a while after initial installation that one of my applications/tools (DevExpress's awesome CodeRush) depends on it and won't install without it. Enabling .NET 3.5 in Windows 8 If you want to run .NET 3.5 on Windows 8, don't download an installer - those installers don't work on Windows 8, and you don't need to do this because you can use the Windows Features dialog to enable .NET 3.5: And that *should* do the trick. If you do this before you install other apps that require .NET 3.5 and install a non-SP1 one version of it, you are going to have no problems. Unfortunately for me, even after I've installed the above, when I run the CodeRush installer I still get this lovely dialog: Now I double checked to see if .NET 3.5 is installed - it is, both for 32 bit and 64 bit. I went as far as creating a small .NET Console app and running it to verify that it actually runs. And it does… So naturally I thought the CodeRush installer is a little whacky. After some back and forth Alex Skorkin on Twitter pointed me in the right direction: He asked me to look in the registry for exact info on which version of .NET 3.5 is installed here: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP where I found that .NET 3.5 SP1 was installed. This is the 64 bit key which looks all correct. However, when I looked under the 32 bit node I found: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v3.5 Notice that the service pack number is set to 0, rather than 1 (which it was for the 64 bit install), which is what the installer requires. So to summarize: the 64 bit version is installed with SP1, the 32 bit version is not. Uhm, Ok… thanks for that! Easy to fix, you say - just install SP1. Nope, not so easy because the standalone installer doesn't work on Windows 8. I can't get either .NET 3.5 installer or the SP 1 installer to even launch. They simply start and hang (or exit immediately) without messages. I also tried to get Windows to update .NET 3.5 by checking for Windows Updates, which should pick up on the dated version of .NET 3.5 and pull down SP1, but that's also no go. Check for Updates doesn't bring down any updates for me yet. I'm sure at some random point in the future Windows will deem it necessary to update .NET 3.5 to SP1, but at this point it's not letting me coerce it to do it explicitly. How did this happen I'm not sure exactly whether this is the cause and effect, but I suspect the story goes like this: Installed Windows 8 without support for .NET 3.5 Installed Visual Studio 2010 which installs .NET 3.5 (no SP) I now had .NET 3.5 installed but without SP1. I then: Tried to install CodeRush - Error: .NET 3.5 SP1 required Enabled .NET 3.5 in Windows Features I figured enabling the .NET 3.5 Windows Features would do the trick. But still no go. Now I suspect Visual Studio installed the 32 bit version of .NET 3.5 on my machine and Windows Features detected the previous install and didn't reinstall it. This left the 32 bit install at least with no SP1 installed. How to Fix it My final solution was to completely uninstall .NET 3.5 *and* to reboot: Go to Windows Features Uncheck the .NET Framework 3.5 Restart Windows Go to Windows Features Check .NET Framework 3.5 and voila, I now have a proper installation of .NET 3.5. I tried this before but without the reboot step in between which did not work. Make sure you reboot between uninstalling and reinstalling .NET 3.5! More Problems The above fixed me right up, but in looking for a solution it seems that a lot of people are also having problems with .NET 3.5 installing properly from the Windows Features dialog. The problem there is that the feature wasn't properly loading from the installer disks or not downloading the proper components for updates. It turns out you can explicitly install Windows features using the DISM tool in Windows.dism.exe /online /enable-feature /featurename:NetFX3 /Source:f:\sources\sxs You can try this without the /Source flag first - which uses the hidden Windows installer files if you kept those. Otherwise insert the DVD or ISO and point at the path \sources\sxs path where the installer lives. This also gives you a little more information if something does go wrong.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Windows  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Talking JavaOne with Rock Star Martijn Verburg

    - by Janice J. Heiss
    JavaOne Rock Stars, conceived in 2005, are the top-rated speakers at each JavaOne Conference. They are awarded by their peers, who, through conference surveys, recognize them for their outstanding sessions and speaking ability. Over the years many of the world’s leading Java developers have been so recognized. Martijn Verburg has, in recent years, established himself as an important mover and shaker in the Java community. His “Diabolical Developer” session at the JavaOne 2011 Conference got people’s attention by identifying some of the worst practices Java developers are prone to engage in. Among other things, he is co-leader and organizer of the thriving London Java User Group (JUG) which has more than 2,500 members, co-represents the London JUG on the Executive Committee of the Java Community Process, and leads the global effort for the Java User Group “Adopt a JSR” and “Adopt OpenJDK” programs. Career highlights include overhauling technology stacks and SDLC practices at Mizuho International, mentoring Oracle on technical community management, and running off shore development teams for AIG. He is currently CTO at jClarity, a start-up focusing on automating optimization for Java/JVM related technologies, and Product Advisor at ZeroTurnaround. He co-authored, with Ben Evans, "The Well-Grounded Java Developer" published by Manning and, as a leading authority on technical team optimization, he is in high demand at major software conferences.Verburg is participating in five sessions, a busy man indeed. Here they are: CON6152 - Modern Software Development Antipatterns (with Ben Evans) UGF10434 - JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group (with Csaba Toth) BOF4047 - OpenJDK Building and Testing: Case Study—Java User Group OpenJDK Bugathon (with Ben Evans and Cecilia Borg) BOF6283 - 101 Ways to Improve Java: Why Developer Participation Matters (with Bruno Souza and Heather Vancura-Chilson) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Kirk Pepperdine, Ellen Kraffmiller and Henri Tremblay) When I asked Verburg about the biggest mistakes Java developers tend to make, he listed three: A lack of communication -- Software development is far more a social activity than a technical one; most projects fail because of communication issues and social dynamics, not because of a bad technical decision. Sadly, many developers never learn this lesson. No source control -- Developers simply storing code in local filesystems and emailing code in order to integrate Design-driven Design -- The need for some developers to cram every design pattern from the Gang of Four (GoF) book into their source code All of which raises the question: If these practices are so bad, why do developers engage in them? “I've seen a wide gamut of reasons,” said Verburg, who lists them as: * They were never taught at high school/university that their bad habits were harmful.* They weren't mentored in their first professional roles.* They've lost passion for their craft.* They're being deliberately malicious!* They think software development is a technical activity and not a social one.* They think that they'll be able to tidy it up later.A couple of key confusions and misconceptions beset Java developers, according to Verburg. “With Java and the JVM in particular I've seen a couple of trends,” he remarked. “One is that developers think that the JVM is a magic box that will clean up their memory, make their code run fast, as well as make them cups of coffee. The JVM does help in a lot of cases, but bad code can and will still lead to terrible results! The other trend is to try and force Java (the language) to do something it's not very good at, such as rapid web development. So you get a proliferation of overly complex frameworks, libraries and techniques trying to get around the fact that Java is a monolithic, statically typed, compiled, OO environment. It's not a Golden Hammer!”I asked him about the keys to running a good Java User Group. “You need to have a ‘Why,’” he observed. “Many user groups know what they do (typically, events) and how they do it (the logistics), but what really drives users to join your group and to stay is to give them a purpose. For example, within the LJC we constantly talk about the ‘Why,’ which in our case is several whys:* Re-ignite the passion that developers have for their craft* Raise the bar of Java developers in London* We want developers to have a voice in deciding the future of Java* We want to inspire the next generation of tech leaders* To bring the disparate tech groups in London together* So we could learn from each other* We believe that the Java ecosystem forms a cornerstone of our society today -- we want to protect that for the futureLooking ahead to Java 8 Verburg expressed excitement about Lambdas. “I cannot wait for Lambdas,” he enthused. “Brian Goetz and his group are doing a great job, especially given some of the backwards compatibility that they have to maintain. It's going to remove a lot of boiler plate and yet maintain readability, plus enable massive scaling.”Check out Martijn Verburg at JavaOne if you get a chance, and, stay tuned for a longer interview yours truly did with Martijn to be publish on otn/java some time after JavaOne. Originally published on blogs.oracle.com/javaone.

    Read the article

  • Talking JavaOne with Rock Star Martijn Verburg

    - by Janice J. Heiss
    JavaOne Rock Stars, conceived in 2005, are the top-rated speakers at each JavaOne Conference. They are awarded by their peers, who, through conference surveys, recognize them for their outstanding sessions and speaking ability. Over the years many of the world’s leading Java developers have been so recognized. Martijn Verburg has, in recent years, established himself as an important mover and shaker in the Java community. His “Diabolical Developer” session at the JavaOne 2011 Conference got people’s attention by identifying some of the worst practices Java developers are prone to engage in. Among other things, he is co-leader and organizer of the thriving London Java User Group (JUG) which has more than 2,500 members, co-represents the London JUG on the Executive Committee of the Java Community Process, and leads the global effort for the Java User Group “Adopt a JSR” and “Adopt OpenJDK” programs. Career highlights include overhauling technology stacks and SDLC practices at Mizuho International, mentoring Oracle on technical community management, and running off shore development teams for AIG. He is currently CTO at jClarity, a start-up focusing on automating optimization for Java/JVM related technologies, and Product Advisor at ZeroTurnaround. He co-authored, with Ben Evans, "The Well-Grounded Java Developer" published by Manning and, as a leading authority on technical team optimization, he is in high demand at major software conferences.Verburg is participating in five sessions, a busy man indeed. Here they are: CON6152 - Modern Software Development Antipatterns (with Ben Evans) UGF10434 - JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group (with Csaba Toth) BOF4047 - OpenJDK Building and Testing: Case Study—Java User Group OpenJDK Bugathon (with Ben Evans and Cecilia Borg) BOF6283 - 101 Ways to Improve Java: Why Developer Participation Matters (with Bruno Souza and Heather Vancura-Chilson) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Kirk Pepperdine, Ellen Kraffmiller and Henri Tremblay) When I asked Verburg about the biggest mistakes Java developers tend to make, he listed three: A lack of communication -- Software development is far more a social activity than a technical one; most projects fail because of communication issues and social dynamics, not because of a bad technical decision. Sadly, many developers never learn this lesson. No source control -- Developers simply storing code in local filesystems and emailing code in order to integrate Design-driven Design -- The need for some developers to cram every design pattern from the Gang of Four (GoF) book into their source code All of which raises the question: If these practices are so bad, why do developers engage in them? “I've seen a wide gamut of reasons,” said Verburg, who lists them as: * They were never taught at high school/university that their bad habits were harmful.* They weren't mentored in their first professional roles.* They've lost passion for their craft.* They're being deliberately malicious!* They think software development is a technical activity and not a social one.* They think that they'll be able to tidy it up later.A couple of key confusions and misconceptions beset Java developers, according to Verburg. “With Java and the JVM in particular I've seen a couple of trends,” he remarked. “One is that developers think that the JVM is a magic box that will clean up their memory, make their code run fast, as well as make them cups of coffee. The JVM does help in a lot of cases, but bad code can and will still lead to terrible results! The other trend is to try and force Java (the language) to do something it's not very good at, such as rapid web development. So you get a proliferation of overly complex frameworks, libraries and techniques trying to get around the fact that Java is a monolithic, statically typed, compiled, OO environment. It's not a Golden Hammer!”I asked him about the keys to running a good Java User Group. “You need to have a ‘Why,’” he observed. “Many user groups know what they do (typically, events) and how they do it (the logistics), but what really drives users to join your group and to stay is to give them a purpose. For example, within the LJC we constantly talk about the ‘Why,’ which in our case is several whys:* Re-ignite the passion that developers have for their craft* Raise the bar of Java developers in London* We want developers to have a voice in deciding the future of Java* We want to inspire the next generation of tech leaders* To bring the disparate tech groups in London together* So we could learn from each other* We believe that the Java ecosystem forms a cornerstone of our society today -- we want to protect that for the futureLooking ahead to Java 8 Verburg expressed excitement about Lambdas. “I cannot wait for Lambdas,” he enthused. “Brian Goetz and his group are doing a great job, especially given some of the backwards compatibility that they have to maintain. It's going to remove a lot of boiler plate and yet maintain readability, plus enable massive scaling.”Check out Martijn Verburg at JavaOne if you get a chance, and, stay tuned for a longer interview yours truly did with Martijn to be publish on otn/java some time after JavaOne.

    Read the article

  • HTML5 and CSS3 Editing in Windows Live Writer

    - by Rick Strahl
    Windows Live Writer is a wonderful tool for editing blog posts and getting them posted to your blog. What makes it nice is that it has a small set of useful features, plus a simple plug-in model that has spawned many useful add-ins. Small tool with a reasonably decent plug-in model to extend equals a great solution to a simple problem. If you're running Windows, have a blog and aren’t using Live Writer you’re probably doing it wrong…One of Live Writer’s nice features is that it can download your blog’s CSS for preview and edit displays. It lets you edit your content inside of the context of that CSS using the WYSIWYG editor, so your content actually looks very close to what you’ll see on your blog while you’re editing your post. Unfortunately Live Writer renders the HTML content in the Web Browser Control’s  default IE 7 rendering mode. Yeah you read that right: IE 7 is the default for the Web Browser control and most applications that use it, are stuck in this modus unless the application explicitly overrides this default. The Web Browser control does not use the version of Internet Explorer installed on the system (IE 10 on my Win8 machine) but uses IE 7 mode for ‘compatibility’ for old applications.If you are importing your blog’s CSS that may suck if you’re using rich HTML 5 and CSS 3 formatting. Hack the Registry to get Live Writer to render using IE 9 or 10In order to get Live Writer (or any other application that uses the Web Browser Control for that matter) to render you can apply a registry hack that overrides the Web Browser Control engine usage for a specific application. I wrote about this in detail in a previous blog post a couple of years back.Here’s how you can set up Windows Live Writer to render your CSS 3 by making a change in your registry:The above is for setup on a 64 bit machine, where I configure Live Writer which is a 32 bit application for using IE 10 rendering. The keys set are as follows:32bit Configuration on 64 bit machine:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BROWSER_EMULATIONKey: WindowsLiveWriter.exeValue: 9000 or 10000  (IE 9 or 10 respectively) (DWORD value)On a 32 bit only machine: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BROWSER_EMULATIONKey: WindowsLiveWriter.exeValue: 9000 or 10000  (IE 9 or 10 respectively) (DWORD value)Use decimal values of 9000, 10000 or 11000 to specify specific versions of Internet Explorer. This is a minor tweak, but it’s nice to actually see my blog posts now with the proper CSS formatting intact. Notice the rounded borders and shadow on the code blocks as well as the overflow-x and scrollbars that show up. In this particular case I can see what the code blocks actually look like in a specific resolution – much better than in the old plain view which just chopped things off at the end of the window frame. There are a few other elements that now show properly in the editor as well including block quotes and note boxes that I occasionally use. It’s minor stuff, but it makes the editing experience better yet and closer to the final things so there are less republish operations than I previously had. Sweet!Note that this approach of putting an IE version override into the registry works with most applications that use the Web Browser control. If you are using the Web Browser control in your own applications, it’s a good idea to switch the browser to a more recent version so you can take advantage of HTML 5 and CSS 3 in your browser displayed content by automatically setting this flag in the registry or as part of the application’s startup routine if not dedicated setup tool is used. At the very least you might set it to 9000 (IE 9) which supports most of the basic CSS3 features and is a decent baseline that works for most Windows 7 and 8 machines. If running pre-IE9, the browser will fall back to IE7 rendering and look bad but at least more recent browsers will see an improved experience.I’m surprised that there aren’t more vendors and third party apps using this feature. You can see in my first screen shot that there are only very few entries in the registry key group on my machine – any other apps use the Web Browser control are using IE7. Go figure. Certainly Windows Live Writer should be writing this key into the registry automatically as part of installation to support this functionality out of the box, but alas since it does not, this registry hack lets you get your way anyway…Resources.reg Files to register Live Write Browser Emulation (set for IE9)Specifying Internet Explorer Version for ApplicationsSnagIt LiveWriter Plug-inDownload Windows Live WriterDownload Windows Live Writer with Chocolatey© Rick Strahl, West Wind Technologies, 2005-2013Posted in Live Writer  Windows   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • An Alphabet of Eponymous Aphorisms, Programming Paradigms, Software Sayings, Annoying Alliteration

    - by Brian Schroer
    Malcolm Anderson blogged about “Einstein’s Razor” yesterday, which reminded me of my favorite software development “law”, the name of which I can never remember. It took much Wikipedia-ing to find it (Hofstadter’s Law – see below), but along the way I compiled the following list: Amara’s Law: We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run. Brook’s Law: Adding manpower to a late software project makes it later. Clarke’s Third Law: Any sufficiently advanced technology is indistinguishable from magic. Law of Demeter: Each unit should only talk to its friends; don't talk to strangers. Einstein’s Razor: “Make things as simple as possible, but not simpler” is the popular paraphrase, but what he actually said was “It can scarcely be denied that the supreme goal of all theory is to make the irreducible basic elements as simple and as few as possible without having to surrender the adequate representation of a single datum of experience”, an overly complicated quote which is an obvious violation of Einstein’s Razor. (You can tell by looking at a picture of Einstein that the dude was hardly an expert on razors or other grooming apparati.) Finagle's Law of Dynamic Negatives: Anything that can go wrong, will—at the worst possible moment. - O'Toole's Corollary: The perversity of the Universe tends towards a maximum. Greenspun's Tenth Rule: Any sufficiently complicated C or Fortran program contains an ad hoc, informally-specified, bug-ridden, slow implementation of half of Common Lisp. (Morris’s Corollary: “…including Common Lisp”) Hofstadter's Law: It always takes longer than you expect, even when you take into account Hofstadter's Law. Issawi’s Omelet Analogy: One cannot make an omelet without breaking eggs - but it is amazing how many eggs one can break without making a decent omelet. Jackson’s Rules of Optimization: Rule 1: Don't do it. Rule 2 (for experts only): Don't do it yet. Kaner’s Caveat: A program which perfectly meets a lousy specification is a lousy program. Liskov Substitution Principle (paraphrased): Functions that use pointers or references to base classes must be able to use objects of derived classes without knowing it Mason’s Maxim: Since human beings themselves are not fully debugged yet, there will be bugs in your code no matter what you do. Nils-Peter Nelson’s Nil I/O Rule: The fastest I/O is no I/O.    Occam's Razor: The simplest explanation is usually the correct one. Parkinson’s Law: Work expands so as to fill the time available for its completion. Quentin Tarantino’s Pie Principle: “…you want to go home have a drink and go and eat pie and talk about it.” (OK, he was talking about movies, not software, but I couldn’t find a “Q” quote about software. And wouldn’t it be cool to write a program so great that the users want to eat pie and talk about it?) Raymond’s Rule: Computer science education cannot make anybody an expert programmer any more than studying brushes and pigment can make somebody an expert painter.  Sowa's Law of Standards: Whenever a major organization develops a new system as an official standard for X, the primary result is the widespread adoption of some simpler system as a de facto standard for X. Turing’s Tenet: We shall do a much better programming job, provided we approach the task with a full appreciation of its tremendous difficulty, provided that we respect the intrinsic limitations of the human mind and approach the task as very humble programmers.  Udi Dahan’s Race Condition Rule: If you think you have a race condition, you don’t understand the domain well enough. These rules didn’t exist in the age of paper, there is no reason for them to exist in the age of computers. When you have race conditions, go back to the business and find out actual rules. Van Vleck’s Kvetching: We know about as much about software quality problems as they knew about the Black Plague in the 1600s. We've seen the victims' agonies and helped burn the corpses. We don't know what causes it; we don't really know if there is only one disease. We just suffer -- and keep pouring our sewage into our water supply. Wheeler’s Law: All problems in computer science can be solved by another level of indirection... Except for the problem of too many layers of indirection. Wheeler also said “Compatibility means deliberately repeating other people's mistakes.”. The Wrong Road Rule of Mr. X (anonymous): No matter how far down the wrong road you've gone, turn back. Yourdon’s Rule of Two Feet: If you think your management doesn't know what it's doing or that your organisation turns out low-quality software crap that embarrasses you, then leave. Zawinski's Law of Software Envelopment: Every program attempts to expand until it can read mail. Zawinski is also responsible for “Some people, when confronted with a problem, think 'I know, I'll use regular expressions.' Now they have two problems.” He once commented about X Windows widget toolkits: “Using these toolkits is like trying to make a bookshelf out of mashed potatoes.”

    Read the article

  • How to export ECC key and Cert from NSS DB and import into JKS keystore and Oracle Wallet

    - by mv
    How to export ECC key and Cert from NSS DB and import into JKS keystore and Oracle Wallet In this blog I will write about how to extract a cert and key from NSS Db and import it to a JKS Keystore and then import that JKS Keystore into Oracle Wallet. 1. Set Java Home I pointed it to JRE 1.6.0_22 $ export JAVA_HOME=/usr/java/jre1.6.0_22/ 2. Create a self signed ECC cert in NSS DB I created NSS DB with self signed ECC certificate. If you already have NSS Db with ECC cert (and key) skip this step. $export NSS_DIR=/export/home/nss/ $$NSS_DIR/certutil -N -d . $$NSS_DIR/certutil -S -x -s "CN=test,C=US" -t "C,C,C" -n ecc-cert -k ec -q nistp192 -d . 3. Export ECC cert and key using pk12util Use NSS tool pk12util to export this cert and key into a p12 file      $$NSS_DIR/pk12util -o ecc-cert.p12 -n ecc-cert -d . -W password 4. Use keytool to create JKS keystore and import this p12 file 4.1 Import p12 file created above into a JKS keystore $JAVA_HOME/bin/keytool -importkeystore -srckeystore ecc-cert.p12 -srcstoretype PKCS12 -deststoretype JKS -destkeystore ecc.jks -srcstorepass password -deststorepass password -srcalias ecc-cert -destalias ecc-cert -srckeypass password -destkeypass password -v But if an error as shown is encountered, keytool error: java.security.UnrecoverableKeyException: Get Key failed: EC KeyFactory not available java.security.UnrecoverableKeyException: Get Key failed: EC KeyFactory not available        at com.sun.net.ssl.internal.pkcs12.PKCS12KeyStore.engineGetKey(Unknown Source)         at java.security.KeyStoreSpi.engineGetEntry(Unknown Source)         at java.security.KeyStore.getEntry(Unknown Source)         at sun.security.tools.KeyTool.recoverEntry(Unknown Source)         at sun.security.tools.KeyTool.doImportKeyStoreSingle(Unknown Source)         at sun.security.tools.KeyTool.doImportKeyStore(Unknown Source)         at sun.security.tools.KeyTool.doCommands(Unknown Source)         at sun.security.tools.KeyTool.run(Unknown Source)         at sun.security.tools.KeyTool.main(Unknown Source) Caused by: java.security.NoSuchAlgorithmException: EC KeyFactory not available         at java.security.KeyFactory.<init>(Unknown Source)         at java.security.KeyFactory.getInstance(Unknown Source)         ... 9 more 4.2 Create a new PKCS11 provider If you didn't get an error as shown above skip this step. Since we already have NSS libraries built with ECC, we can create a new PKCS11 provider Create ${java.home}/jre/lib/security/nss.cfg as follows: name = NSS     nssLibraryDirectory = ${nsslibdir}    nssDbMode = noDb    attributes = compatibility where nsslibdir should contain NSS libs with ECC support. Add the following line to ${java.home}/jre/lib/security/java.security :      security.provider.9=sun.security.pkcs11.SunPKCS11 ${java.home}/lib/security/nss.cfg Note that those who are using Oracle iPlanet Web Server or Oracle Traffic Director, NSS libs built with ECC are in <ws_install_dir>/lib or <otd_install_dir>/lib. 4.3. Now keytool should work Now you can try the same keytool command and see that it succeeds : $JAVA_HOME/bin/keytool -importkeystore -srckeystore ecc-cert.p12 -srcstoretype PKCS12 -deststoretype JKS -destkeystore ecc.jks -srcstorepass password -deststorepass password -srcalias ecc-cert -destalias ecc-cert -srckeypass password -destkeypass password -v [Storing ecc.jks] 5. Convert JKS keystore into an Oracle Wallet You can export this cert and key from JKS keystore and import it into an Oracle Wallet if you need using orapki tool as shown below. Make sure that orapki you use supports ECC. Also for ECC you MUST use "-jsafe" option. $ orapki wallet create -pwd password  -wallet .  -jsafe $ orapki wallet jks_to_pkcs12 -wallet . -pwd password -keystore ecc.jks -jkspwd password -jsafe AS $orapki wallet display -wallet . -pwd welcome1  -jsafeOracle PKI Tool : Version 11.1.2.0.0Copyright (c) 2004, 2012, Oracle and/or its affiliates. All rights reserved.Requested Certificates:User Certificates:Subject:        CN=test,C=USTrusted Certificates:Subject:        OU=Class 3 Public Primary Certification Authority,O=VeriSign\, Inc.,C=USSubject:        CN=GTE CyberTrust Global Root,OU=GTE CyberTrust Solutions\, Inc.,O=GTE Corporation,C=USSubject:        OU=Class 2 Public Primary Certification Authority,O=VeriSign\, Inc.,C=USSubject:        OU=Class 1 Public Primary Certification Authority,O=VeriSign\, Inc.,C=USSubject:        CN=test,C=US As you can see our ECC cert in the wallet. You can follow the same steps for RSA certs as well. 6. References http://icedtea.classpath.org/bugzilla/show_bug.cgi?id=356 http://old.nabble.com/-PATCH-FOR-REVIEW-%3A-Support-PKCS11-cryptography-via-NSS-p25282932.html http://www.mozilla.org/projects/security/pki/nss/tools/pk12util.html

    Read the article

  • SSH error: Permission denied, please try again

    - by Kamal
    I am new to ubuntu. Hence please forgive me if the question is too simple. I have a ubuntu server setup using amazon ec2 instance. I need to connect my desktop (which is also a ubuntu machine) to the ubuntu server using SSH. I have installed open-ssh in ubuntu server. I need all systems of my network to connect the ubuntu server using SSH (no need to connect through pem or pub keys). Hence opened SSH port 22 for my static IP in security groups (AWS). My SSHD-CONFIG file is: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin yes StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes Through webmin (Command shell), I have created a new user named 'senthil' and added this new user to 'sudo' group. sudo adduser -y senthil sudo adduser senthil sudo I tried to login using this new user 'senthil' in 'webmin'. I was able to login successfully. When I tried to connect ubuntu server from my terminal through SSH, ssh senthil@SERVER_IP It asked me to enter password. After the password entry, it displayed: Permission denied, please try again. On some research I realized that, I need to monitor my server's auth log for this. I got the following error in my auth log (/var/log/auth.log) Jul 2 09:38:07 ip-192-xx-xx-xxx sshd[3037]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=MY_CLIENT_IP user=senthil Jul 2 09:38:09 ip-192-xx-xx-xxx sshd[3037]: Failed password for senthil from MY_CLIENT_IP port 39116 ssh2 When I tried to debug using: ssh -v senthil@SERVER_IP OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to SERVER_IP [SERVER_IP] port 22. debug1: Connection established. debug1: identity file {MY-WORKSPACE}/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file {MY-WORKSPACE}/.ssh/id_rsa-cert type -1 debug1: identity file {MY-WORKSPACE}/.ssh/id_dsa type -1 debug1: identity file {MY-WORKSPACE}/.ssh/id_dsa-cert type -1 debug1: identity file {MY-WORKSPACE}/.ssh/id_ecdsa type -1 debug1: identity file {MY-WORKSPACE}/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA {SERVER_HOST_KEY} debug1: Host 'SERVER_IP' is known and matches the ECDSA host key. debug1: Found key in {MY-WORKSPACE}/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: password debug1: Next authentication method: password senthil@SERVER_IP's password: debug1: Authentications that can continue: password Permission denied, please try again. senthil@SERVER_IP's password: For password, I have entered the same value which I normally use for 'ubuntu' user. Can anyone please guide me where the issue is and suggest some solution for this issue?

    Read the article

  • Solaris 11 pkg fix is my new friend

    - by user12611829
    While putting together some examples of the Solaris 11 Automated Installer (AI), I managed to really mess up my system, to the point where AI was completely unusable. This was my fault as a combination of unfortunate incidents left some remnants that were causing problems, so I tried to clean things up. Unsuccessfully. Perhaps that was a bad idea (OK, it was a terrible idea), but this is Solaris 11 and there are a few more tricks in the sysadmin toolbox. Here's what I did. # rm -rf /install/* # rm -rf /var/ai # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 So far so good. Then comes an oops..... setup-service[168]: cd: /var/ai//service/.conf-templ: [No such file or directory] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This is where you generally say a few things to yourself, and then promise to quit deleting configuration files and directories when you don't know what you are doing. Then you recall that the new Solaris 11 packaging system has some ability to correct common mistakes (like the one I just made). Let's give it a try. # pkg fix installadm Verifying: pkg://solaris/install/installadm ERROR dir: var/ai Group: 'root (0)' should be 'sys (3)' dir: var/ai/ai-webserver Missing: directory does not exist dir: var/ai/ai-webserver/compatibility-configuration Missing: directory does not exist dir: var/ai/ai-webserver/conf.d Missing: directory does not exist dir: var/ai/image-server Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/cgi-bin Missing: directory does not exist dir: var/ai/image-server/images Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/logs Missing: directory does not exist dir: var/ai/profile Missing: directory does not exist dir: var/ai/service Group: 'root (0)' should be 'sys (3)' dir: var/ai/service/.conf-templ Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_data Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_files Missing: directory does not exist file: var/ai/ai-webserver/ai-httpd-templ.conf Missing: regular file does not exist file: var/ai/service/.conf-templ/AI.db Missing: regular file does not exist file: var/ai/image-server/cgi-bin/cgi_get_manifest.py Missing: regular file does not exist Created ZFS snapshot: 2012-12-11-21:09:53 Repairing: pkg://solaris/install/installadm Creating Plan (Evaluating mediators): | DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 3/3 0.0/0.0 0B/s PHASE ITEMS Updating modified actions 16/16 Updating image state Done Creating fast lookup database Done In just a few moments, IPS found the missing files and incorrect ownerships/permissions. Instead of reinstalling the system, or falling back to an earlier Live Upgrade boot environment, I was able to create my AI services and now all is well. # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 Refreshing install services Warning: mDNS registry of service solaris11-x86 could not be verified. Creating default-i386 alias Setting the default PXE bootfile(s) in the local DHCP configuration to: bios clients (arch 00:00): default-i386/boot/grub/pxegrub Refreshing install services Warning: mDNS registry of service default-i386 could not be verified. # installadm create-service -n solaris11u1-x86 --imagepath /install/solaris11u1-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 514/514 292.3/292.3 0B/s PHASE ITEMS Installing new actions 661/661 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11u1-x86 Image path: /install/solaris11u1-x86 Refreshing install services Warning: mDNS registry of service solaris11u1-x86 could not be verified. # installadm list Service Name Alias Of Status Arch Image Path ------------ -------- ------ ---- ---------- default-i386 solaris11-x86 on i386 /install/solaris11-x86 solaris11-x86 - on i386 /install/solaris11-x86 solaris11u1-x86 - on i386 /install/solaris11u1-x86 This is way way better than pkgchk -f in Solaris 10. I'm really beginning to like this new IPS packaging system.

    Read the article

  • International Radio Operators Alphabet in F# &amp; Silverlight &ndash; Part 2

    - by MarkPearl
    So the brunt of my my very complex F# code has been done. Now it’s just putting the Silverlight stuff in. The first thing I did was add a new project to my solution. I gave it a name and VS2010 did the rest of the magic in creating the .Web project etc. In this instance because I want to take the MVVM approach and make use of commanding I have decided to make the frontend a Silverlight4 project. I now need move my F# code into a proper Silverlight Library. Warning – when you create the Silverlight Library VS2010 will ask you whether you want it to be based on Silverlight3 or Silverlight4. I originally went for Silverlight4 only to discover when I tried to compile my solution that I was given an error… Error 12 F# runtime for Silverlight version v4.0 is not installed. Please go to http://go.microsoft.com/fwlink/?LinkId=177463 to download and install matching.. After asking around I discovered that the Silverlight4 F# runtime is not available yet. No problem, the suggestion was to change the F# Silverlight Library to a Silverlight3 project however when going to the properties of the project file – even though I changed it to Silverlight3, VS2010 did not like it and kept reverting it to a Silverlight4 project. After a few minutes of scratching my head I simply deleted Silverlight4 F# Library project and created a new F# Silverlight Library project in Silverlight3 and VS2010 was happy. Now that the project structure is set up, rest is fairly simple. You need to add the Silverlight Library as a reference to the C# Silverlight Front End. Then setup your views, since I was following the MVVM pattern I made a Views & ViewModel folder and set up the relevant View and ViewModels. The MainPageViewModel file looks as follows using System; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Ink; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Collections.ObjectModel; namespace IROAFrontEnd.ViewModels { public class MainPageViewModel : ViewModelBase { private string _iroaString; private string _inputCharacters; public string InputCharacters { get { return _inputCharacters; } set { if (_inputCharacters != value) { _inputCharacters = value; OnPropertyChanged("InputCharacters"); } } } public string IROAString { get { return _iroaString; } set { if (_iroaString != value) { _iroaString = value; OnPropertyChanged("IROAString"); } } } public ICommand MySpecialCommand { get { return new MyCommand(this); } } public class MyCommand : ICommand { readonly MainPageViewModel _myViewModel; public MyCommand(MainPageViewModel myViewModel) { _myViewModel = myViewModel; } public event EventHandler CanExecuteChanged; public bool CanExecute(object parameter) { return true; } public void Execute(object parameter) { var result = ModuleMain.ConvertCharsToStrings(_myViewModel.InputCharacters); var newString = ""; foreach (var Item in result) { newString += Item + " "; } _myViewModel.IROAString = newString.Trim(); } } } } One of the features I like in Silverlight4 is the new commanding. You will notice in my I have put the code under the command execute to reference to my F# module. At the moment this could be cleaned up even more, but will suffice for now.. public void Execute(object parameter) { var result = ModuleMain.ConvertCharsToStrings(_myViewModel.InputCharacters); var newString = ""; foreach (var Item in result) { newString += Item + " "; } _myViewModel.IROAString = newString.Trim(); } I then needed to set the view up. If we have a look at the MainPageView.xaml the xaml code will look like the following…. Nothing to fancy, but battleship grey for now… take careful note of the binding of the command in the button to MySpecialCommand which was created in the ViewModel. <UserControl x:Class="IROAFrontEnd.Views.MainPageView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400"> <Grid x:Name="LayoutRoot" Background="White"> <Grid.RowDefinitions> <RowDefinition/> <RowDefinition/> <RowDefinition/> </Grid.RowDefinitions> <TextBox Grid.Row="0" Text="{Binding InputCharacters, Mode=TwoWay}"/> <Button Grid.Row="1" Command="{Binding MySpecialCommand}"> <TextBlock Text="Generate"/> </Button> <TextBlock Grid.Row="2" Text="{Binding IROAString}"/> </Grid> </UserControl> Finally in the App.xaml.cs file we need to set the View and link it to the ViewModel. private void Application_Startup(object sender, StartupEventArgs e) { var myView = new MainPageView(); var myViewModel = new MainPageViewModel(); myView.DataContext = myViewModel; this.RootVisual = myView; }   Once this is done – hey presto – it worked. I typed in some “Test Input” and clicked the generate button and the correct Radio Operators Alphabet was generated. And that’s the end of my first very basic F# Silverlight application.

    Read the article

  • Trash Destination Adapter

    The Trash Destination and this article came from early experiences of using SSIS and community feedback at the time. When developing a package it is very useful to have a destination adapter that does nothing but consume rows with no setup requirement. You often want run a package part way through development, or just add a path so you can set a Data Viewer. There are stock tasks that can be used, but with the Trash Destination all columns are treated as selected automatically (usage type of read-only), so the pipeline knows they are required. It is also obvious that this is for development or diagnostic purposes, and is clearly not a part of the functional design of the package. It is also ideal for just playing around and exploring concepts in SSIS, and is often used in conjunction with the Data Generator Source. Using these two components it is easy to setup a test of an expression in the Derived Column Transformation for example. The Data Generator Source provides some dummy data, and the Trash Destination allows you to anchor the output path and set a Data Viewer to examine the results. It can also be used when performance tuning packages. It is a consistent and known quantity that has no external influences, so it is ideal as a destination when breaking the data flow into sections to isolate a bottleneck. The adapter is really simple to use and requires no setup. Simply drop it onto the pipeline designer and use it to terminate your data flow path. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally, for 2005/2008, you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trash Destination transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Downloads The Trash Destination is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Trash Destination for SQL Server 2005 Trash Destination for SQL Server 2008 Trash Destination for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.34 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.33 - SQL Server 2008 release. Includes support for upgrade of 2005 packages. RTM compatible, previously February 2008 CTP. (4 Mar 2008) Version 2.0.0.31 - SQL Server 2008 November 2007 CTP. (14 Feb 2008) SQL Server 2005 Version 1.0.2.18 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. (12 Jun 2006) Version 1.0.1.1 - SQL Server 2005 IDW 15 June CTP. Minor enhancements over v1.0.1.0. (11 Jun 2005) Version 1.0.1.0 - SQL Server 2005 IDW 14 April CTP. First Public Release. (30 May 2005) Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed.  ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. The full error message is shown below for reference: TITLE: Microsoft Visual Studio ------------------------------ The component could not be added to the Data Flow task. Please verify that this component is properly installed. ------------------------------ ADDITIONAL INFORMATION: The data flow object "Konesans.Dts.Pipeline.TrashDestination.Trash, Konesans.Dts.Pipeline.TrashDestination, Version=1.0.1.0, Culture=neutral, PublicKeyToken=b8351fe7752642cc" is not installed correctly on this computer. (Microsoft.DataTransformationServices.Design) For 2005/2008, once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component? This is not necessary for SQL Server 2012 as the new SSIS toolbox automatically detects components. If you are still having issues then contact us, but please provide as much detail as possible about error, as well as which version of the the task you are using and details of the SSIS tools installed.

    Read the article

  • ct.sym steals the ASM class

    - by Geertjan
    Some mild consternation on the Twittersphere yesterday. Marcus Lagergren not being able to find the ASM classes in JDK 8 in NetBeans IDE: And there's no such problem in Eclipse (and apparently in IntelliJ IDEA). Help, does NetBeans (despite being incredibly awesome) suck, after all? The truth of the matter is that there's something called "ct.sym" in the JDK. When javac is compiling code, it doesn't link against rt.jar. Instead, it uses a special symbol file lib/ct.sym with class stubs. Internal JDK classes are not put in that symbol file, since those are internal classes. You shouldn't want to use them, at all. However, what if you're Marcus Lagergren who DOES need these classes? I.e., he's working on the internal JDK classes and hence needs to have access to them. Fair enough that the general Java population can't access those classes, since they're internal implementation classes that could be changed anytime and one wouldn't want all unknown clients of those classes to start breaking once changes are made to the implementation, i.e., this is the rt.jar's internal class protection mechanism. But, again, we're now Marcus Lagergen and not the general Java population. For the solution, read Jan Lahoda, NetBeans Java Editor guru, here: https://netbeans.org/bugzilla/show_bug.cgi?id=186120 In particular, take note of this: AFAIK, the ct.sym is new in JDK6. It contains stubs for all classes that existed in JDK5 (for compatibility with existing programs that would use private JDK classes), but does not contain implementation classes that were introduced in JDK6 (only API classes). This is to prevent application developers to accidentally use JDK's private classes (as such applications would be unportable and may not run on future versions of JDK). Note that this is not really a NB thing - this is the behavior of javac from the JDK. I do not know about any way to disable this except deleting ct.sym or the option mentioned above. Regarding loading the classes: JVM uses two classpath's: classpath and bootclasspath. rt.jar is on the bootclasspath and has precedence over anything on the "custom" classpath, which is used by the application. The usual way to override classes on bootclasspath is to start the JVM with "-Xbootclasspath/p:" option, which prepends the given jars (and presumably also directories) to bootclasspath. Hence, let's take the first option, the simpler one, and simply delete the "ct.sym" file. Again, only because we need to work with those internal classes as developers of the JDK, not because we want to hack our way around "ct.sym", which would mean you'd not have portable code at the end of the day. Go to the JDK 8 lib folder and you'll find the file: Delete it. Start NetBeans IDE again, either on JDK 7 or JDK 8, doesn't make a difference for these purposes, create a new Java application (or use an existing one), make sure you have set the JDK above as the JDK of the application, and hey presto: The above obviously assumes you have a build of JDK 8 that actually includes the ASM package. And below you can see that not only are the classes found but my build succeeded, even though I'm using internal JDK classes. The yellow markings in the sidebar mean that the classes are imported but not used in the code, where normally, if I hadn't removed "ct.sym", I would have seen red error marking instead, and the code wouldn't have compiled. Note: I've tried setting "-XDignore.symbol.file" in "netbeans.conf" and in other places, but so far haven't got that to work. Simply deleting the "ct.sym" file (or back it up somewhere and put it back when needed) is quite clearly the most straightforward solution. Ultimately, if you want to be able to use those internal classes while still having portable code, do you know what you need to do? You need to create a JDK bug report stating that you need an internal class to be added to "ct.sym". Probably you'll get a motivation back stating WHY that internal class isn't supposed to be used externally. There must be a reason why those classes aren't available for external usage, otherwise they would have been added to "ct.sym". So, now the only remaining question is why the Eclipse compiler doesn't hide the internal JDK classes. Apparently the Eclipse compiler ignores the "ct.sym" file. In other words, at the end of the day, far from being a bug in NetBeans... we have now found a (pretty enormous, I reckon) bug in Eclipse. The Eclipse compiler does not protect you from using internal JDK classes and the code that you create in Eclipse may not work with future releases of the JDK, since the JDK team is simply going to be changing those classes that are not found in the "ct.sym" file while assuming (correctly, thanks to the presence of "ct.sym" mechanism) that no code in the world, other than JDK code, is tied to those classes.

    Read the article

  • How to Play PC Games on Your TV

    - by Chris Hoffman
    No need to wait for Valve’s Steam Machines — connect your Windows gaming PC to your TV and use powerful PC graphics in the living room today. It’s easy — you don’t need any unusual hardware or special software. This is ideal if you’re already a PC gamer who wants to play your games on a larger screen. It’s also convenient if you want to play multiplayer PC games with controllers in your living rom. HDMI Cables and Controllers You’ll need an HDMI cable to connect your PC to your television. This requires a TV with HDMI-in, a PC with HDMI-out, and an HDMI cable. Modern TVs and PCs have had HDMI built in for years, so you should already be good to go. If you don’t have a spare HDMI cable lying around, you may have to buy one or repurpose one of your existing HDMI cables. Just don’t buy the expensive HDMI cables — even a cheap HDMI cable will work just as well as a more expensive one. Plug one end of the HDMI cable into the HDMI-out port on your PC and one end into the HDMI-In port on your TV. Switch your TV’s input to the appropriate HDMI port and you’ll see your PC’s desktop appear on your TV.  Your TV becomes just another external monitor. If you have your TV and PC far away from each other in different rooms, this won’t work. If you have a reasonably powerful laptop, you can just plug that into your TV — or you can unplug your desktop PC and hook it up next to your TV. Now you’ll just need an input device. You probably don’t want to sit directly in front of your TV with a wired keyboard and mouse! A wireless keyboard and wireless mouse can be convenient and may be ideal for some games. However, you’ll probably want a game controller like console players use. Better yet, get multiple game controllers so you can play local-multiplayer PC games with other people. The Xbox 360 controller is the ideal controller for PC gaming. Windows supports these controllers natively, and many PC games are designed specifically for these controllers. Note that Xbox One controllers aren’t yet supported on Windows because Microsoft hasn’t released drivers for them. Yes, you could use a third-party controller or go through the process of pairing a PlayStation controller with your PC using unofficial tools, but it’s better to get an Xbox 360 controller. Just plug one or more Xbox controllers into your PC’s USB ports and they’ll work without any setup required. While many PC games to support controllers, bear in mind that some games require a keyboard and mouse. A TV-Optimized Interface Use Steam’s Big Picture interface to more easily browse and launch games. This interface was designed for using on a television with controllers and even has an integrated web browser you can use with your controller. It will be used on the Valve’s Steam Machine consoles as the default TV interface. You can use a mouse with it too, of course. There’s also nothing stopping you from just using your Windows desktop with a mouse and keyboard — aside from how inconvenient it will be. To launch Big Picture Mode, open Steam and click the Big Picture button at the top-right corner of your screen. You can also press the glowing Xbox logo button in the middle of an Xbox 360 Controller to launch the Big Picture interface if Steam is open. Another Option: In-Home Streaming If you want to leave your PC in one room of your home and play PC games on a TV in a different room, you can consider using local streaming to stream games over your home network from your gaming PC to your television. Bear in mind that the game won’t be as smooth and responsive as it would if you were sitting in front of your PC. You’ll also need a modern router with fast wireless network speeds to keep up with the game streaming. Steam’s built-in In-Home Streaming feature is now available to everyone. You could plug a laptop with less-powerful graphics hardware into your TV and use it to stream games from your powerful desktop gaming rig. You could also use an older desktop PC you have lying around. To stream a game, log into Steam on your gaming PC and log into Steam with the same account on another computer on your home network. You’ll be able to view the library of installed games on your other PC and start streaming them. NVIDIA also has their own GameStream solution that allows you to stream games from a PC with powerful NVIDIA graphics hardware. However, you’ll need an NVIDIA Shield handheld gaming console to do this. At the moment, NVIDIA’s game streaming solution can only stream to the NVIDIA Shield. However, the NVIDIA Shield device can be connected to your TV so you can play that streaming game on your TV. Valve’s Steam Machines are supposed to bring PC gaming to the living room and they’ll do it using HDMI cables, a custom Steam controller, the Big Picture interface, and in-home streaming for compatibility with Windows games. You can do all of this yourself today — you’ll just need an Xbox 360 controller instead of the not-yet-released Steam controller. Image Credit: Marco Arment on Flickr, William Hook on Flickr, Lewis Dowling on Flickr

    Read the article

  • Row Count Plus Transformation

    As the name suggests we have taken the current Row Count Transform that is provided by Microsoft in the Integration Services toolbox and we have recreated the functionality and extended upon it. There are two things about the current version that we thought could do with cleaning up Lack of a custom UI You have to type the variable name yourself In the Row Count Plus Transformation we solve these issues for you. Another thing we thought was missing is the ability to calculate the time taken between components in the pipeline. An example usage would be that you want to know how many rows flowed between Component A and Component B and how long it took. Again we have solved this issue. Credit must go to Erik Veerman of Solid Quality Learning for the idea behind noting the duration. We were looking at one of his packages and saw that he was doing something very similar but he was using a Script Component as a transformation. Our philosophy is that if you have to write or Copy and Paste the same piece of code more than once then you should be thinking about a custom component and here it is. The Row Count Plus Transformation populates variables with the values returned from; Counting the rows that have flowed through the path Returning the time in seconds between when it first saw a row come down this path and when it saw the final row. It is possible to leave both these boxes blank and the component will still work.   All input columns are passed through the transformation unaltered, you are not permitted to change or add to the inputs or outputs of this component. Optionally you can set the component to fire an event, which happens during the PostExecute phase of the execution. This can be useful to improve visibility of this information, such that it is captured in package logging, or can be used to drive workflow in the case of an error event. Properties Property Data Type Description OutputRowCountVariable String The name of the variable into which the amount of row read will be passed (Optional). OutputDurationVariable String The name of the variable into which the duration in seconds will be passed. (Optional). EventType RowCountPlusTransform.EventType The type of event to fire during post execute, included in which are the row count and duration values. RowCountPlusTransform.EventType Enumeration Name Value Description None 0 Do not fire any event. Information 1 Fire an Information event. Warning 2 Fire a Warning event. Error 3 Fire an Error event. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. For 2005/2008 Only - Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Row Count Plus Transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations, and this component requires a minimum of SQL Server 2005 Service Pack 1. Downloads The Row Number Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Row Count Plus Transformation for SQL Server 2005 Row Count Plus Transformation for SQL Server 2008 Row Count Plus Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.6 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.5 - SQL Server 2008 release. (15 Oct 2008) SQL Server 2005 Version 1.1.0.43 - Bug fix for duration. For long running processes the duration second count may have been incorrect. (8 Sep 2006) Version 1.1.0.42 - SP1 Compatibility Testing. Added the ability to raise an event with the count and duration data for easier logging or workflow. (18 Jun 2006) Version 1.0.0.1 - SQL Server 2005 RTM. Made available as general public release. (20 Mar 2006) Screenshot Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you get an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed.  ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component?

    Read the article

  • Telerik is First to Announce Support for Microsoft Silverlight Analytics Framework

    Yesterday at MIX 10 conference Microsoft announced the Microsoft Silverlight Analytics Framework Beta. The Silverlight Analytics Framework (SAF) is a new open-source framework to allow designers and developers to integrate web analytics into Silverlight applications in a consistent manner. Supporting out-of-browser and offline scenarios, Microsoft built this framework in conjunction with a number of web analytics services and control vendors to support multiple analytics services simultaneously without degrading application performance. Because the SAF is enabled as a set of behaviors in Microsoft Expression Blend, designers and developers can visually instrument their designs and configure A/B testing rapidly without writing any code. Telerik is proud to be the first control vendor to support the Silverlight Analytics Framework. RadControls for Silverlight can be used with the framework out of the box. The suite offers Silverlight Analytics Framework handlers and behavior, helping developers to fine tune the values sent to the analytics providers. Because the analytics framework is using the Managed Extensibility Framework (MEF) for composition, you don't need to change the way you use the controls to benefit from the Telerik handlers. Just add a reference to the Telerik assemblies that contains the handlers. Here is the code that you need to declare to use RadTreeView: <UserControl x:Class="Telerik.SLAF.MainPage"         xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"         xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"         xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"         xmlns:ga="clr-namespace:Google.WebAnalytics;assembly=Google.WebAnalytics"         xmlns:sa="clr-namespace:Microsoft.WebAnalytics.Behaviors;assembly=Microsoft.WebAnalytics.Behaviors"         xmlns:ic="clr-namespace:Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions"         xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"         xmlns:telerikNavigation="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation">        <Grid x:Name="LayoutRoot">         <i:Interaction.Behaviors>             <ga:GoogleAnalytics ProfileId="--Your GA ProfileId" Category="Demo" />         </i:Interaction.Behaviors>         <telerikNavigation:RadTreeView>             <i:Interaction.Triggers>                 <i:EventTrigger EventName="SelectionChanged">                     <sa:TrackAction />                 </i:EventTrigger>             </i:Interaction.Triggers>             <telerikNavigation:RadTreeViewItem Header="Item1">             </telerikNavigation:RadTreeViewItem>             <telerikNavigation:RadTreeViewItem Header="Item2" />             <telerikNavigation:RadTreeViewItem Header="Item3" />         </telerikNavigation:RadTreeView>     </Grid> </UserControl> Download the Telerik Microsoft Silverlight Analytics Framework Handlers and the sample project. This is our first Beta release - please drop us a line with any feedback you have or even better if you are at MIX10 - come visit us at the booth in the "Commons" hall so we can discuss it in person. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Extending Blend for Visual Studio 2013

    - by Chris Skardon
    Originally posted on: http://geekswithblogs.net/cskardon/archive/2013/11/01/extending-blend-for-visual-studio-2013.aspxSo, I got a comment yesterday on my post about Extending Blend 4 and Blend for Visual Studio 2012 asking if I knew how to get it working for Blend for Visual Studio 2013.. My initial thoughts were, just change the location to get the blend dlls from Visual Studio 11.0 to 12.0 and you’re all set, so I went to do that, only to discover that the dlls I normally reference, well – they don’t exist. So… I’ve made a presumption that the actual process of using MEF etc is still the same. I was wrong. So, the route to discovery – required DotPeek and opening a few of blends dlls.. Browsing through the Blend install directory (./Microsoft Visual Studio 12.0/Blend/) I notice the .addin files: So I decide to peek into the SketchFlow dll, then promptly remember SketchFlow is quite a big thing, and hunting through there is not ideal, luckily there is another dll using an .addin file, ‘Microsoft.Expression.Importers.Host’, so we’ll go for that instead. We can see it’s still using the ‘IPackage’ formula, but where is that sucker? Well, we just press F12 on the ‘IPackage’ bit and DotPeek takes us there, with a very handy comment at the top: // Type: Microsoft.Expression.Framework.IPackage // Assembly: Microsoft.Expression.Framework, Version=12.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a // MVID: E092EA54-4941-463C-BD74-283FD36478E2 // Assembly location: C:\Program Files (x86)\Microsoft Visual Studio 12.0\Blend\Microsoft.Expression.Framework.dll Now we know where the IPackage interface is defined, so let’s just try writing a control. Last time I did a separate dll for the control, this time I’m not, but it still works if you want to do it that way. Let’s build a control! STEP 1 Create a new WPF application Naming doesn’t matter any more! I have gone with ‘Hello2013’ (see what I did there?) STEP 2 Delete: App.Config App.xaml MainWindow.xaml We won’t be needing them STEP 3 Change your application to be a Class Library instead. (You might also want to delete the ‘vshost’ stuff in your output directory now, as they only exist for hosting the WPF app, and just cause clutter) STEP 4 Add a reference to the ‘Microsoft.Expression.Framework.dll’ (which you can find in ‘C:\Program Files\Microsoft Visual Studio 12.0\Blend’ – that’s Program Files (x86) if you’re on an x64 machine!). STEP 5 Add a User Control, I’m going with ‘Hello2013Control’, and following from last time, it’s just a TextBlock in a Grid: <UserControl x:Class="Hello2013.Hello2013Control" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="300"> <Grid> <TextBlock>Hello Blend for VS 2013</TextBlock> </Grid> </UserControl> STEP 6 Add a class to load the package – I’ve called it – yes you guessed – Hello2013Package, which will look like this: namespace Hello2013 { using Microsoft.Expression.Framework; using Microsoft.Expression.Framework.UserInterface; public class Hello2013Package : IPackage { private Hello2013Control _hello2013Control; private IWindowService _windowService; public void Load(IServices services) { _windowService = services.GetService<IWindowService>(); Initialize(); } private void Initialize() { _hello2013Control = new Hello2013Control(); if (_windowService.PaletteRegistry["HelloPanel"] == null) _windowService.RegisterPalette("HelloPanel", _hello2013Control, "Hello Window"); } public void Unload(){} } } You might note that compared to the 2012 version we’re no longer [Exporting(typeof(IPackage))]. The file you create in STEP 7 covers this for us. STEP 7 Add a new file called: ‘<PROJECT_OUTPUT_NAME>.addin’ – in reality you can call it anything and it’ll still read it in just fine, it’s just nicer if it all matches up, so I have ‘Hello2013.addin’. Content wise, we need to have: <?xml version="1.0" encoding="utf-8"?> <AddIn AssemblyFile="Hello2013.dll" /> obviously, replacing ‘Hello2013.dll’ with whatever your dll is called. STEP 8 We set the ‘addin’ file to be copied to the output directory: STEP 9 Build! STEP 10 Go to your output directory (./bin/debug) and copy the 3 files (Hello2013.dll, Hello2013.pdb, Hello2013.addin) and then paste into the ‘Addins’ folder in your Blend directory (C:\Program Files\Microsoft Visual Studio 12.0\Blend\Addins) STEP 11 Start Blend for Visual Studio 2013 STEP 12 Go to the ‘Window’ menu and select ‘Hello Window’ STEP 13 Marvel at your new control! Feel free to email me / comment with any problems!

    Read the article

  • Caveat utilitor - Can I run two versions of Microsoft Project side-by-side?

    - by Martin Hinshelwood
    A number of out customers have asked if there are any problems in installing and running multiple versions of Microsoft Project on a single client. Although this is a case of Caveat utilitor (Let the user beware), as long as the user understands and accepts the issues that can occur then they can do this. Although Microsoft provide the ability to leave old versions of Office products (except Outlook) on your client when you are installing a new version of the product they certainly do not endorse doing so. Figure: For Project you can choose to keep the old stuff   That being the case I would have preferred that they put a “(NOT RECOMMENDED)” after the options to impart that knowledge to the rest of us, but they did not. The default and recommended behaviour is for the newer version installer to remove the older versions. Of course this does not apply in the revers. There are no forward compatibility packs for Office. There are a number of negative behaviours (or bugs) that can occur in this configuration: There is only one MS Project In Windows a file extension can only be associated with a single program.  In this case, MPP files can be associated with only one version of winproj.exe.  The executables are in different folders so if a user double-clicks a Project file on the desktop, file explorer, or Outlook email, Windows will launch the winproj.exe associated with MPP and then load the MPP file.  There are problems associated with this situation and in some cases workarounds. The user double-clicks on a Project 2010 file, Project 2007 launches but is unable to open the file because it is a newer version.  The workaround is for the user to launch Project 2010 from the Start menu then open the file.  If the file is attached to an email they will need to first drag the file to the desktop. All your linked MS Project files need to be of the same version There are a number of problems that occur when people use on Microsoft’s Object Linking and Embedding (OLE) technology.  The three common uses of OLE are: for inserted projects where a Master project contains sub-projects and each sub-project resides in its own MPP file shared resource pools where multiple MPP files share a common resource pool kept in a single MPP file cross-project links where a task or milestone in one MPP file has a  predecessor/successor relationship with a task or milestone in a different MPP file What I’ve seen happen before is that if you are running in a version of Project that is not associated with the MPP extension and then try and activate an OLE link then Project tries to launch the other version of Project.  Things start getting very confused since different MPP files are being controlled by different versions of Project running at the same time.  I haven’t tried this in awhile so I can’t give you exact symptoms but I suspect that if Project 2010 is involved the symptoms will be different then in a Project 2003/2007 scenario.  I’ve noticed that Project 2010 gives different error messages for the exact same problem when it occurs in Project 2003 or 2007.  -Anonymous The recommendation would be either not to use this feature if you have to have multiple versions of Project installed or to use only a single version of Project. You may get unexpected negative behaviours if you are using shared resource pools or resource pools even when you are not running multiple versions as I have found that they can get broken very easily. If you need these thing then it is probably best to use Project Server as it was created to solve many of these specific issues. Note: I would not even allow multiple people to access a network copy of a Project file because of the way Windows locks files in write mode. This can cause write-locks that get so bad a server restart is required I’ve seen user’s files get write-locked to the point where the only resolution is to reboot the server. Changing the default version to run for an extension So what if you want to change the default association from Project 2007 to Project 2010?   Figure: “Control Panel | Folder Options | Change the file associated with a file extension” Windows normally only lists the last version installed for a particular extension. You can select a specific version by selecting the program you want to change and clicking “Change program… | Browse…” and then selecting the .exe you want to use on the file system. Figure: You will need to select the exact version of “winproj.exe” that you want to run Conclusion Although it is possible to run multiple versions of Project on one system in the main it does not really make sense.

    Read the article

  • Silverlight Relay Commands

    - by George Evjen
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} I am fairly new at Silverlight development and I usually have an issue that needs research every day. Which I enjoy, since I like the idea of going into a day knowing that I am  going to learn something new. The issue that I am currently working on centers around relay commands. I have a pretty good handle on Relay Commands and how we use them within our applications. <Button Command="{Binding ButtonCommand}" CommandParameter="NewRecruit" Content="New Recruit" /> Here in our xaml we have a button. The button has a Command and a CommandParameter. The command binds to the ButtonCommand that we have in our ViewModel RelayCommand _buttonCommand;         /// <summary>         /// Gets the button command.         /// </summary>         /// <value>The button command.</value>         public RelayCommand ButtonCommand         {             get             {                 if (_buttonCommand == null)                 {                     _buttonCommand = new RelayCommand(                         x => x != null && x.ToString().Length > 0 && CheckCommandAvailable(x.ToString()),                         x => ExecuteCommand(x.ToString()));                 }                 return _buttonCommand;             }         }   In our relay command we then do some checks with a lambda expression. We check if the command  parameter is null, is the length greater than 0 and we have a CheckCommandAvailable method that will tell  us if the button is even enabled. After we check on these three items we then pass the command parameter to an action method. This is all pretty straight forward, the issue that we solved a few days ago centered around having a control that needed to use a Relay Command and this control was a nested control and was using a different DataContext. The example below illustrates how we handled this scenario. In our xaml usercontrol we had to set a name to this control. <Controls3:RadTileViewItem x:Class="RecruitStatusTileView"     xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"     xmlns:d="http://schemas.microsoft.com/expression/blend/2008"     xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"      xmlns:Controls1="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls"      xmlns:Controls2="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Input"      xmlns:Controls3="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation"      mc:Ignorable="d" d:DesignHeight="400" d:DesignWidth="800" Header="{Binding Title,Mode=TwoWay}" MinimizedHeight="100"                             x:Name="StatusView"> Here we are using a telerik RadTileViewItem. We set the name of this control to “StatusView”. In our button control we set our command parameters and commands different than the example above. <HyperlinkButton Content="{Binding BigBoardButtonText, Mode=TwoWay}" CommandParameter="{Binding 'Position.PositionName'}" Command="{Binding ElementName=StatusView, Path=DataContext.BigBoardCommand, Mode=TwoWay}" /> This hyperlink button lives in a ListBox control and this listbox has an ItemSource of PositionSelectors. The Command Parameter is binding to the Position.Position property of that PositionSelectors object. This again is pretty straight forward again. What gets a bit tricky is the Command property in the hyperlink. It is binding to the element name we created in the user control (StatusView) Because this hyperlink is in a listbox and is in the item template it doesn’t have a direct handle on the DataContext that the RadTileViewItem has so we have to make sure it does. We do that by binding to the element name of status view then set the path to DataContext.BigBoardCommand. BigBoardCommand is the name of the RelayCommand in the view model. private RelayCommand _bigBoardCommand = null;         /// <summary>         /// Gets the big board command.         /// </summary>         /// <value>The big board command.</value>         public RelayCommand BigBoardCommand         {             get             {                 if (_bigBoardCommand == null)                 {                     _bigBoardCommand = new RelayCommand(x => true, x => AddToBigBoard(x.ToString()));                 }                 return _bigBoardCommand;             }         } From there we check for true again and then call the action and pass in the parameter that we had as the command parameter. What we are working on now is a bit trickier than this second example. In the above example we are only creating this TileViewItem with this name “StatusView” once. In another part of our application we are generating multiple TileViewItems, so we cannot set the name in the control as we cant have multiple controls with the same name. When we run the application we get an error that reads that the value is out of expected range. My searching has led me to think we cannot have multiple controls with the same name. This is today’s problem and Ill post the solution to this once it is found.

    Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >