compatibility - Page 71

Any socket programmers out there? How can I obtain the IPv4 address of the client?

- by Dr Dork

Hello! I'm prepping for a simple work project and am trying to familiarize myself with the basics of socket programming in a Unix dev environment. At this point, I have some basic server side code setup to listen for incoming TCP connection requests from clients after the parent socket has been created and is set to listen... int sockfd, newfd; unsigned int len; socklen_t sin_size; char msg[]="Test message sent"; char buf[MAXLEN]; int st, rv; struct addrinfo hints, *serverinfo, *p; struct sockaddr_storage client; char ip[INET6_ADDRSTRLEN]; . . //parent socket creation and listen code omitted for simplicity . //wait for connection requests from clients while(1) { //Returns the socketID and address of client connecting to socket if( ( newfd = accept(sockfd, (struct sockaddr *)&client, &len) ) == -1 ){ perror("Accept"); exit(-1); } if( (rv = recv(newfd, buf, MAXLEN-1, 0 )) == -1) { perror("Recv"); exit(-1); } struct sockaddr_in *clientAddr = ( struct sockaddr_in *) get_in_addr((struct sockaddr *)&client); inet_ntop(client.ss_family, clientAddr, ip, sizeof ip); printf("Receive from %s: query type is %s\n", ip, buf); if( ( st = send(newfd, msg, strlen(msg), 0)) == -1 ) { perror("Send"); exit(-1); } //ntohs is used to avoid big-endian and little endian compatibility issues printf("Send %d byte to port %d\n", ntohs(clientAddr->sin_port) ); close(newfd); } } I found the get_in_addr function online and placed it at the top of my code and use it to obtain the IP address of the client connecting... // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } but the function always returns the IPv6 IP address since thats what the sa_family property is set as. My question is, is the IPv4 IP address stored anywhere in the data I'm using and, if so, how can I access it? Thanks so much in advance for all your help!

Read the article

dojo layout tutorial dor version 1.7 doesn't work for 1.7.2

- by Sheena

This is sortof a continuation to dojo1.7 layout acting screwy. So I made some working widgets and tested them out, i then tried altering my work using the tutorial at http://dojotoolkit.org/documentation/tutorials/1.7/dijit_layout/ to make the layout nice. After failing at that in many interesting ways (thus my last question) I started on a new path. My plan is now to implement the layout tutorial example and then stick in my widgets. For some reason even following the tutorial wont work... everything loads then disappears and I'm left with a blank browser window. Any ideas? It just struck me that it could be browser compatibility issues, I'm working on Firefox 13.0.1. As far as I know Dojo is supposed to be compatible with this... anyway, have some code: HTML: <body class="claro"> <div id="appLayout" class="demoLayout" data-dojo-type="dijit.layout.BorderContainer" data-dojo-props="design: 'headline'"> <div class="centerPanel" data-dojo-type="dijit.layout.ContentPane" data-dojo-props="region: 'center'"> <div> <h4>Group 1 Content</h4> <p>stuff</p> </div> <div> <h4>Group 2 Content</h4> </div> <div> <h4>Group 3 Content</h4> </div> </div> <div class="edgePanel" data-dojo-type="dijit.layout.ContentPane" data-dojo-props="region: 'top'"> Header content (top) </div> <div id="leftCol" class="edgePanel" data-dojo-type="dijit.layout.ContentPane" data-dojo-props="region: 'left', splitter: true"> Sidebar content (left) </div> </div> </body> Dojo Configuration: var dojoConfig = { baseUrl: "${request.static_url('mega:static/js')}", //this is in a mako template tlmSiblingOfDojo: false, packages: [ { name: "dojo", location: "libs/dojo" }, { name: "dijit", location: "libs/dijit" }, { name: "dojox", location: "libs/dojox" }, ], parseOnLoad: true, has: { "dojo-firebug": true, "dojo-debug-messages": true }, async: true }; other js stuff: require(["dijit/layout/BorderContainer", "dijit/layout/TabContainer", "dijit/layout/ContentPane", "dojo/parser"]); css: html, body { height: 100%; margin: 0; overflow: hidden; padding: 0; } #appLayout { height: 100%; } #leftCol { width: 14em; }

Read the article

HTML: Include, or exclude, optional closing tags?

- by Ian Boyd

Some HTML1 closing tags are optional, i.e.: </HTML> </HEAD> </BODY> </P> </DT> </DD> </LI> </OPTION> </THEAD> </TH> </TBODY> </TR> </TD> </TFOOT> </COLGROUP> Note: Not to be confused with closing tags that are forbidden to be included, i.e.: </IMG> </INPUT> </BR> </HR> </FRAME> </AREA> </BASE> </BASEFONT> </COL> </ISINDEX> </LINK> </META> </PARAM> Note: xhtml is different from HTML. xhtml is a form of xml, which requires every element have a closing tag. A closing tag can be forbidden in html, yet mandatory in xhtml. Are the optional closing tags ideally included, but we'll accept them if you forgot them, or ideally not included, but we'll accept them if you put them in In other words, should i include them, or should i not include them? The HTML 4.01 spec talks about closing element tags being optional, but doesn't say if it's preferable to include them, or preferable to not include them. On the other hand, a random article on DevGuru says: The ending tag is optional. However, it is recommended that it be included. The reason i ask is because you just know it's optional for compatibility reasons; and they would have made them (mandatory | forbidden) if they could have. Put it another way: What did HTML 1, 2, 3 do with regards to these, now optional, closing tags. What does HTML 5 do? And what should i do? Footnotes 1HTML 4.01

Read the article

Why does this textbox binding example work in WPF but not in Silverlight?

- by Edward Tanguay

Why is it in the following silverlight application that when I: change the default text in the first textbox move the cursor to the second text box (i.e. take focus off first textbox) click the button that inside the button handler, it still has the old value "default text"? What do I have to do to get the binding to work in Silverlight? The same code works fine in WPF. XAML: <UserControl x:Class="TestUpdate123.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignWidth="640" d:DesignHeight="480"> <StackPanel Margin="10" HorizontalAlignment="Left"> <TextBox Text="{Binding InputText}" Height="200" Width="600" Margin="0 0 0 10"/> <StackPanel HorizontalAlignment="Left"> <Button Content="Convert" Click="Button_Convert_Click" Margin="0 0 0 10"/> </StackPanel> <TextBox Height="200" Width="600" Margin="0 0 0 10"/> <TextBlock Text="{Binding OutputText}"/> </StackPanel> </UserControl> Code Behind: using System.Windows; using System.Windows.Controls; using System.ComponentModel; namespace TestUpdate123 { public partial class MainPage : UserControl, INotifyPropertyChanged { #region ViewModelProperty: InputText private string _inputText; public string InputText { get { return _inputText; } set { _inputText = value; OnPropertyChanged("InputText"); } } #endregion #region ViewModelProperty: OutputText private string _outputText; public string OutputText { get { return _outputText; } set { _outputText = value; OnPropertyChanged("OutputText"); } } #endregion public MainPage() { InitializeComponent(); DataContext = this; InputText = "default text"; } private void Button_Convert_Click(object sender, RoutedEventArgs e) { OutputText = InputText; } #region INotifiedProperty Block public event PropertyChangedEventHandler PropertyChanged; protected void OnPropertyChanged(string propertyName) { PropertyChangedEventHandler handler = PropertyChanged; if (handler != null) { handler(this, new PropertyChangedEventArgs(propertyName)); } } #endregion } }

Read the article

WPF - Two way binding use a user control...binding to object, not an element!

- by Scott

I created an object with a simple property with a default value. I then created a user control that has a text box in it. I set the datacontext of the user control to the object. The text box correctly shows the properties default value but I can't seem to update the property value when the user changes the text box value. I created a simple project to illustrate my code. Thanks for the help!! public partial class UserControl1 : UserControl { public UserControl1() { InitializeComponent(); } private string _titleValue; public string TitleValue { get { return _titleValue; } set { _titleValue = value; textBox1.Text = _titleValue; } } public static readonly DependencyProperty TitleValueProperty = DependencyProperty.Register( "TitleValue", typeof(string), typeof(UserControl1), new FrameworkPropertyMetadata(new PropertyChangedCallback(titleUpdated)) ); //Don't think I should need to do this!!! private static void titleUpdated(DependencyObject d, DependencyPropertyChangedEventArgs e) { ((UserControl1)d).TitleValue = (string)e.NewValue; } } <UserControl x:Class="WpfApplication1.UserControl1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="300"> <Grid> <TextBox Height="23" HorizontalAlignment="Left" Margin="94,97,0,0" Name="textBox1" VerticalAlignment="Top" Width="120" Text="{Binding Path=TitleValue, Mode=TwoWay}"/> </Grid> </UserControl> public partial class MainWindow : Window { public MainWindow() { InitializeComponent(); var dummy = new DummyObject("This is my title."); userControl11.DataContext = dummy; } private void button1_Click(object sender, RoutedEventArgs e) { MessageBox.Show("The value is: " + ((DummyObject)userControl11.DataContext).Title); } } <Window x:Class="WpfApplication1.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="350" Width="525" xmlns:my="clr-namespace:WpfApplication1"> <Grid> <my:UserControl1 HorizontalAlignment="Left" Margin="95,44,0,0" x:Name="userControl11" VerticalAlignment="Top" Height="191" Width="293" TitleValue="{Binding Path=Title, Mode=TwoWay}"/> <Button Content="Check Value" Height="23" HorizontalAlignment="Left" Margin="20,12,0,0" Name="button1" VerticalAlignment="Top" Width="75" Click="button1_Click" /> </Grid> </Window>

Read the article

How do I do distributed UML development (à la FOSS)?

- by James A. Rosen

I have a UML project (built in IBM's Rational System Architect/Modeler, so stored in their XML format) that has grown quite large. Additionally, it now contains several pieces that other groups would like to re-use. I come from a software development (especially FOSS) background, and am trying to understand how to use that as an analogy here. The problem I am grappling with is similar to the Fragile Base Class problem. Let me start with how it works in an object-oriented (say, Java or Ruby) FOSS ecosystem: Group 1 publishes some "core" package, say "net/smtp version 1.0" Group 2 includes Group 1's net/smtp 1.0 package in the vendor library of their software project At some point, Group 1 creates a new 2.0 branch of net/smtp that breaks backwards compatibility (say, it removes an old class or method, or moves a class from one package to another). They tell users of the 1.0 version that it will be deprecated in one year. Group 2, when they have the time, updates to net/smtp 2.0. When they drop in the new package, their compiler (or test suite, for Ruby) tells them about the incompatibility. They do have to make some manual changes, but all of the changes are in the code, in plain text, a medium with which they are quite familiar. Plus, they can often use their IDE's (or text editor's) "global-search-and-replace" function once they figure out what the fixes are. When we try to apply this model to UML in RSA, we run into some problems. RSA supports some fairly powerful refactorings, but they seem to only work if you have write access to all of the pieces. If I rename a class in one package, RSA can rename the references, but only at the same time. It's very difficult to look at the underlying source (the XML) and figure out what's broken. To fix such a problem in the RSA editor itself means tons of clicking on things -- there is no good equivalent of "global-search-and-replace," at least not after an incomplete refactor. They real sticking point seems to be that RSA assumes that you want to do all your editing using their GUI, but that makes certain operations prohibitively difficult. Does anyone have examples of open-source UML projects that have overcome this problem? What strategies do they use for communicating changes?

Read the article

How to use command bindings in user controls in wpf?

- by Sam

In MainWindow the commandbinding works fine. In UserControl1 it doesnt work. Note the datacontext is set correctly as is evidenced by the content of the button which is the result of a binding. I am not trying to bind the command in the usercontrol to a command in mainwindow or any other such trickery. I am just trying to replicate what I did in MainWindow in UserControl1. // MainWindow xaml <StackPanel> <Button Content="Click Here" Command="{Binding ClickHereCommand}" Height="25" Width="90"></Button> <local:UserControl1></local:UserControl1> </StackPanel> // MainWindow public partial class MainWindow : Window { public static RoutedCommand ClickHereCommand { get; set; } public MainWindow() { InitializeComponent(); this.DataContext = this; ClickHereCommand = new RoutedCommand(); CommandBindings.Add(new CommandBinding(ClickHereCommand, ClickHereExecuted)); } public void ClickHereExecuted(object sender, ExecutedRoutedEventArgs e) { System.Windows.MessageBox.Show("hello"); } } // UserControl1 xaml <UserControl x:Class="CommandBindingTest.UserControl1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="300" x:Name="root"> <Grid DataContext="{Binding ElementName=root}" > <Button Content="{Binding ButtonContent}" Command="{Binding ClickHereCommand}" Height="25" Width="90"></Button> </Grid> </UserControl> // UserControl1 public partial class UserControl1 : UserControl, INotifyPropertyChanged { private string _ButtonContent; public string ButtonContent { get { return _ButtonContent; } set { if (_ButtonContent != value) { _ButtonContent = value; OnPropertyChanged("ButtonContent"); } } } public static RoutedCommand ClickHereCommand { get; set; } public UserControl1() { InitializeComponent(); ClickHereCommand = new RoutedCommand(); CommandBindings.Add(new CommandBinding(ClickHereCommand, ClickHereExecuted)); ButtonContent = "Click Here"; } public void ClickHereExecuted(object sender, ExecutedRoutedEventArgs e) { System.Windows.MessageBox.Show("hello from UserControl1"); } #region INotifyPropertyChanged Members public event PropertyChangedEventHandler PropertyChanged; public void OnPropertyChanged(string name) { if (PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs(name)); } } #endregion }

Read the article

Php plugin to replace '->' with '.' as the member access operator ? Or even better: alternative synt

- by Gigi

Present day usable solution: Note that if you use an ide or an advanced editor, you could make a code template, or record a macro that inserts '->' when you press Ctrl and '.' or something. Netbeans has macros, and I have recorded a macro for this, and I like it a lot :) (just click the red circle toolbar button (start record macro),then type -> into the editor (thats all the macro will do, insert the arrow into the editor), then click the gray square (stop record macro) and assign the 'Ctrl dot' shortcut to it, or whatever shortcut you like) The php plugin: The php plugin, would also have to have a different string concatenation operator than the dot. Maybe a double dot ? Yea... why not. All it has to do is set an activation tag so that it doesnt replace / interpreter '.' as '->' for old scripts and scripts that dont intent do use this. Something like this: <php+ $obj.i = 5 ?> (notice the modified '<?php' tag to '<?php+' ) This way it wouldnt break old code. (and you can just add the '<?php+' code template to your editor and then type 'php tab' (for netbeans) and it would insert '<?php+' ) With the alternative syntax method you could even have old and new syntax cohabitating on the same page like this (I am illustrating this to show the great compatibility of this method, not because you would want to do this): <?php+ $obj.i = 5; ?> <?php $obj->str = 'a' . 'b'; ?> You could change the tag to something more explanatory, in case somebody who doesnt know about the plugin reads the script and thinks its a syntax error <?php-dot.com $obj.i = 5; ?> This is easy because most editors have code templates, so its easy to assign a shortcut to it. And whoever doesnt want the dot replacement, doesnt have to use it. These are NOT ultimate solutions, they are ONLY examples to show that solutions exist, and that arguments against replacing '->' with '.' are only excuses. (Just admit you like the arrow, its ok : ) With this potential method, nobody who doesnt want to use it would have to use it, and it wouldnt break old code. And if other problems (ahem... excuses) arise, they could be fixed too. So who can, and who will do such a thing ?

Read the article

How to design service that can provide interface as JAX-WS web service, or via JMS, or as local meth

- by kevinegham

Using a typical JEE framework, how do I develop and deploy a service that can be called as a web service (with a WSDL interface), be invoked via JMS messages, or called directly from another service in the same container? Here's some more context: Currently I am responsible for a service (let's call it Service X) with the following properties: Interface definition is a human readable document kept up-to-date manually. Accepts HTTP form-encoded requests to a single URL. Sends plain old XML responses (no schema). Uses Apache to accept requests + a proprietary application server (not servlet or EJB based) containing all logic which runs in a seperate tier. Makes heavy use of a relational database. Called both by internal applications written in a variety of languages and also by a small number of third-parties. I want to (or at least, have been told to!): Switch to a well-known (pref. open source) JEE stack such as JBoss, Glassfish, etc. Split Service X into Service A and Service B so that we can take Service B down for maintenance without affecting Service A. Note that Service B will depend on (i.e. need to make requests to) Service A. Make both services easier for third parties to integrate with by providing at least a WS-I style interface (WSDL + SOAP + XML + HTTP) and probably a JMS interface too. In future we might consider a more lightweight API too (REST + JSON? Google Protocol Buffers?) but that's a nice to have. Additional consideration are: On a smaller deployment, Service A and Service B will likely to running on the same machine and it would seem rather silly for them to use HTTP or a message bus to communicate; better if they could run in the same container and make method calls to each other. Backwards compatibility with the existing ad-hoc Service X interface is not required, and we're not planning on re-using too much of the existing code for the new services. I'm happy with either contract-first (WSDL I guess) or (annotated) code-first development. Apologies if my terminology is a bit hazy - I'm pretty experienced with Java and web programming in general, but am finding it quite hard to get up to speed with all this enterprise / SOA stuff - it seems I have a lot to learn! I'm also not very used to using a framework rather than simply writing code that calls some packages to do things. I've got as far as downloading Glassfish, knocking up a simple WSDL file and using wsimport + a little dummy code to turn that into a WAR file which I've deployed.

Read the article

How can I obtain the IPv4 address of the client?

- by Dr Dork

Hello! I'm prepping for a simple work project and am trying to familiarize myself with the basics of socket programming in a Unix dev environment. At this point, I have some basic server side code setup to listen for incoming TCP connection requests from clients after the parent socket has been created and is set to listen... int sockfd, newfd; unsigned int len; socklen_t sin_size; char msg[]="Test message sent"; char buf[MAXLEN]; int st, rv; struct addrinfo hints, *serverinfo, *p; struct sockaddr_storage client; char ip[INET6_ADDRSTRLEN]; . . //parent socket creation and listen code omitted for simplicity . //wait for connection requests from clients while(1) { //Returns the socketID and address of client connecting to socket if( ( newfd = accept(sockfd, (struct sockaddr *)&client, &len) ) == -1 ){ perror("Accept"); exit(-1); } if( (rv = recv(newfd, buf, MAXLEN-1, 0 )) == -1) { perror("Recv"); exit(-1); } struct sockaddr_in *clientAddr = ( struct sockaddr_in *) get_in_addr((struct sockaddr *)&client); inet_ntop(client.ss_family, clientAddr, ip, sizeof ip); printf("Receive from %s: query type is %s\n", ip, buf); if( ( st = send(newfd, msg, strlen(msg), 0)) == -1 ) { perror("Send"); exit(-1); } //ntohs is used to avoid big-endian and little endian compatibility issues printf("Send %d byte to port %d\n", ntohs(clientAddr->sin_port) ); close(newfd); } } I found the get_in_addr function online and placed it at the top of my code and use it to obtain the IP address of the client connecting... // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } but the function always returns the IPv6 IP address since thats what the sa_family property is set as. My question is, is the IPv4 IP address stored anywhere in the data I'm using and, if so, how can I access it? Thanks so much in advance for all your help!

Read the article

Freemarker rendering differently on IE8

- by scphantm

we have a template that uses this for the record line <input type="${inputType}" name="${variableName}.code" id="${variable}.${vnum}.${answer.code}" class="checkbox" value="${answer.code}" [#nested/] [#if (answer.textLength > 0) && scripting]onchange="showOtherBox( this, '${variable}.[#if descriptionHack]${variableNumber}[#else]${vnum}[/#if].${answer.code}.description' )"[/#if] [#if showValues && (existing == answer.code)]checked="checked"[/#if]/> On IE8 it renders as this <span class="field"> <INPUT id=responses.8.L class=checkbox value=L type=checkbox name="responses['8'].answers['L'].code"> <LABEL for=responses.8.L>Award(s) for special accomplishment or performance related to activity participation (please list)</LABEL> <TEXTAREA id=responses.8.L.description class=" visible" rows=4 cols=60 name="responses['8'].answers['L'].description"></TEXTAREA> </span> and on every other browser we tried, it renders as this <span class="field"> <input type="checkbox" name="responses['8'].answers['L'].code" id="responses.8.L" class="checkbox" value="L" onchange="showOtherBox( this, 'responses.8.L.description' )"> <label for="responses.8.L">Award(s) for special accomplishment or performance related to activity participation (please list)</label> <textarea rows="4" cols="60" name="responses['8'].answers['L'].description" id="responses.8.L.description" class="visible" classname="visible"></textarea> </span> The difference being that in the FTL script, the if statement [#if (answer.textLength > 0) && scripting] is true for everything except IE. In IE8 its false for some reason and therefore it does not put the OnChange javascript event on the input tag. Has anyone seen anything like this before? we are using Freemarker 2.3.9 Update, it kinda works if i turn compatibility mode on for IE8. but not exactly. when i do that, the onchange event doesn't fire until the check box loses focus. which is very different than everything else. Is there a quick way to fix this without too much trouble? i suppose i could put something in that says if ie8, insert onclick instead of onchange. that may work, but i would need an authorization from the client to fix it like that.

Read the article

Certificate Trusts Lists in IIS7

- by BrettRobi

I am trying to enable mutual authentication for my WebService hosted in IIS7. I have the server side cert setup and working but cannot figure out how to get a Certificate Trust List created and setup in IIS7 so that I can require and validate client side certificates. All of my client side certs are signed by my own root cert so I need to create a CTL that contains just my root cert and then have IIS validate client provided certs against the CTL. Can anyone shed some light on how to do this? IIS6 had a UI for assigning a CTL, but I can find nothing similar in IIS7. Update: I have now successfully used MakeCTL in wizard mode to create a CTL with a Friendly Name. However I don't have adsutil support on my IIS7 box so via other posts elsewhere I am trying to use the 'netsh http add sslcert' command to assign the CTL to my site. Before I could use this command I had to remove the existing SSL cert that was assigned to my site for server authentication. Then in my netsh command I specify the thumbprint of that very same SSL cert I removed, plus a made up appid, plus 'sslctlidentifier=MyCTL sslctlstorename=CA'. The resulting command is: netsh http add sslcert ipport=10.10.10.10:443 certhash=adfdffa988bb50736b8e58a54c1eac26ed005050 appid={ffc3e181-e14b-4a21-b022-59fc669b09ff} sslctlidentifier=MyCTL sslctlstorename=CA (the IP addr is munged), but I am getting this error: SSL Certificate add failed, Error: 1312 A specified logon session does not exist. It may already have been terminated. I am sure the error is related to the CTL options because if I remove them it works (though no CTL is assigned of course). Can anyone help me take this last step and make this work? UPDATE 01-07-2010: I never resolved this with IIS 7.0 and have since migrated our app to IIS 7.5 and am giving this another try. Per the response from Taras Chuhay I installed IIS6 Compatibility on my test server and tried the steps he documented using adsutil.vbs (which can also be found here). I immediately ran into this error: ErrNumber: -2147023584 Error trying to SET the Property: SslCtlIdentifier when running this command: adsutil.vbs set w3svc/1/SslCtlIdentifier MyFriendlyName I then went on to try the next adsutil.vbs command documented and it failed with the same error. I have verified that the CTL I created has a Friendly Name of MyFriendlyName and that it exists in the 'Intermediate Certification Authorities\Certificate Trust List' store of LocalComputer. So once again I am at a dead standstill. I don't know what else to try. Has anyone ever gotten CTL's to work with IIS7 or 7.5? Ever? Am I beating a DEAD horse. Google turns up nothing but my own posts and other similar stories. Update 2/23/10 - I've confirmed with Microsoft that this is a bug with IIS 7.5, but it does work with IIS 7. Check out this link for details: http://viisual.net/configuration/IIS7-CTLs.htm Update 6/08/10 - I can now confirm that KB981506 resolves this issue. There is a patch associated with this KB that must be applied to Server 2008 R2 machines to enable this functionality. Once that is installed all works flawlessly for me.

Read the article

SQL Server 2008 R2 Enterprise won't install on Windows 2008 R2 Enterprise

- by Carlos Paulino

I've been trying to install SQL Server on a new Windows Server 2008. I have tried everything but I haven't been able to narrow down the problem. When the installation fails I get " Exit code (Decimal): -2068643839". The problem with this is that according to Microsoft this is a generic error code. I follow their guide to look into the detail.txt inside C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\ But I can't find something that specifies the exact error. Any suggestions ? Thanks in advanced. I uploaded to detail.txt to http://www.megaupload.com/?d=0MV46SZH because it is to big to paste here. Below is the summary.txt ---------- Overall summary: Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Exit code (Decimal): -2068643839 Exit facility code: 1203 Exit error code: 1 Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup. Start time: 2011-02-28 11:29:56 End time: 2011-02-28 11:34:45 Requested action: Install Machine Properties: Machine name: SA-SERVER Machine processor count: 8 OS version: Windows Server 2008 R2 OS service pack: Service Pack 1 OS region: United States OS language: English (United States) OS architecture: x64 Process architecture: 64 Bit OS clustered: No Product features discovered: Product Instance Instance ID Feature Language Edition Version Clustered Package properties: Description: SQL Server Database Services 2008 R2 ProductName: SQL Server 2008 R2 Type: RTM Version: 10 SPLevel: 0 Installation location: F:\x64\setup\ Installation edition: ENTERPRISE User Input Settings: ACTION: Install ADDCURRENTUSERASSQLADMIN: True AGTSVCACCOUNT: NT AUTHORITY\SYSTEM AGTSVCPASSWORD: ***** AGTSVCSTARTUPTYPE: Manual ASBACKUPDIR: Backup ASCOLLATION: Latin1_General_CI_AS ASCONFIGDIR: Config ASDATADIR: Data ASDOMAINGROUP: <empty> ASLOGDIR: Log ASPROVIDERMSOLAP: 1 ASSVCACCOUNT: <empty> ASSVCPASSWORD: ***** ASSVCSTARTUPTYPE: Automatic ASSYSADMINACCOUNTS: <empty> ASTEMPDIR: Temp BROWSERSVCSTARTUPTYPE: Disabled CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini CUSOURCE: ENABLERANU: False ENU: True ERRORREPORTING: False FARMACCOUNT: <empty> FARMADMINPORT: 0 FARMPASSWORD: ***** FEATURES: SQLENGINE,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK,OCS FILESTREAMLEVEL: 0 FILESTREAMSHARENAME: <empty> FTSVCACCOUNT: <empty> FTSVCPASSWORD: ***** HELP: False IACCEPTSQLSERVERLICENSETERMS: False INDICATEPROGRESS: False INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\ INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\ INSTALLSQLDATADIR: <empty> INSTANCEDIR: D:\SQLServer INSTANCEID: MSSQLSERVER INSTANCENAME: MSSQLSERVER ISSVCACCOUNT: NT AUTHORITY\SYSTEM ISSVCPASSWORD: ***** ISSVCSTARTUPTYPE: Automatic NPENABLED: 0 PASSPHRASE: ***** PCUSOURCE: PID: ***** QUIET: False QUIETSIMPLE: False ROLE: AllFeatures_WithDefaults RSINSTALLMODE: FilesOnlyMode RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE RSSVCPASSWORD: ***** RSSVCSTARTUPTYPE: Automatic SAPWD: ***** SECURITYMODE: SQL SQLBACKUPDIR: <empty> SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS SQLSVCACCOUNT: NT AUTHORITY\SYSTEM SQLSVCPASSWORD: ***** SQLSVCSTARTUPTYPE: Automatic SQLSYSADMINACCOUNTS: SA-SERVER\Administrator SQLTEMPDBDIR: <empty> SQLTEMPDBLOGDIR: <empty> SQLUSERDBDIR: <empty> SQLUSERDBLOGDIR: <empty> SQMREPORTING: False TCPENABLED: 1 UIMODE: Normal X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\ConfigurationFile.ini Detailed results: Feature: Database Engine Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: SQL Client Connectivity SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Integration Services Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Connectivity Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Complete Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Management Tools - Basic Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools SDK Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Client Tools Backwards Compatibility Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Business Intelligence Development Studio Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Feature: Microsoft Sync Framework Status: Failed: see logs for details MSI status: Passed Configuration status: Passed Rules with failures: Global rules: Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110228_112601\SystemConfigurationCheck_Report.htm

Read the article

register_globals error in php

- by user145862

I was stuck up with the error directive 'register_globals' is no longer available in PHP in unknown on line 0 when tried to check the php version using "php -v" after enabling register_globals in php.ini file. I am not getting any php version info by doing so. Instead it throws the above mentioned error.After turning off this option, php info works quite well. It is very essential for me to have register_globals to be turned on.How can I have this corrected. my php.ini is as follows: ; Default Value: None ; Development Value: "GP" ; Production Value: "GP" ; http://php.net/request-order request_order = "GP" ; Whether or not to register the EGPCS variables as global variables. You may ; want to turn this off if you don't want to clutter your scripts' global scope ; with user data. ; You should do your best to write your scripts so that they do not require ; register_globals to be on; Using form variables as globals can easily lead ; to possible security problems, if the code is not very well thought of. ; register_globals = On ; Determines whether the deprecated long $HTTP_*_VARS type predefined variables ; are registered by PHP or not. As they are deprecated, we obviously don't ; recommend you use them. They are on by default for compatibility reasons but ; they are not recommended on production servers. ; Default Value: On ; Development Value: Off ; Production Value: Off ; register_long_arrays = Off ; This directive determines whether PHP registers $argv & $argc each time it ; runs. $argv contains an array of all the arguments passed to PHP when a script ; is invoked. $argc contains an integer representing the number of arguments ; that were passed when the script was invoked. These arrays are extremely ; useful when running scripts from the command line. When this directive is ; enabled, registering these variables consumes CPU cycles and memory each time ; a script is executed. For performance reasons, this feature should be disabled ; on production servers. ; Note: This directive is hardcoded to On for the CLI SAPI ; Default Value: On ; Development Value: Off ; Production Value: Off ; register_argc_argv = Off ; When enabled, the SERVER and ENV variables are created when they're first ; used (Just In Time) instead of when the script starts. If these variables ; are not used within a script, having this directive on will result in a ; performance gain. The PHP directives register_globals, register_long_arrays, ; and register_argc_argv must be disabled for this directive to have any affect. ; auto_globals_jit = On

Read the article

ssh authentication nfs

- by user40135

Hi all I would like to do ssh from machine "ub0" to another machine "ub1" without using passwords. I setup using nfs on "ub0" but still I am asked to insert a password. Here is my scenario: * machine ub0 and ub1 have the same user "mpiu", with same pwd, same userid, and same group id * the 2 servers are sharing a folder that is the HOME directory for "mpiu" * I did a chmod 700 on the .ssh * I created a key using ssh-keygene -t dsa * I did "cat id_dsa.pub authorized_keys". On this last file I tried also chmod 600 and chmod 640 * off course I can guarantee that on machine ub1 the user "shared_user" can see the same fodler that wes mounted with no problem. Below the content of my .ssh folder Code: authorized_keys id_dsa id_dsa.pub known_hosts After all of this calling wathever function "ssh ub1 hostname" I am requested my password. Do you know what I can try? I also UNcommented in the ssh_config file for both machines this line IdentityFile ~/.ssh/id_dsa I also tried ssh -i $HOME/.ssh/id_dsa mpiu@ub1 Below the ssh -vv Code: OpenSSH_5.1p1 Debian-3ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 OpenSSH_5.1p1 Debian-3ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ub1 [192.168.2.9] port 22. debug1: Connection established. debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /mirror/mpiu/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version lshd-2.0.4 lsh - a GNU ssh debug1: no match: lshd-2.0.4 lsh - a GNU ssh debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-3ubuntu1 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,spki-sign-rsa debug2: kex_parse_kexinit: aes256-cbc,3des-cbc,blowfish-cbc,arcfour debug2: kex_parse_kexinit: aes256-cbc,3des-cbc,blowfish-cbc,arcfour debug2: kex_parse_kexinit: hmac-sha1,hmac-md5 debug2: kex_parse_kexinit: hmac-sha1,hmac-md5 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server-client 3des-cbc hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client-server 3des-cbc hmac-md5 none debug2: dh_gen_key: priv key bits set: 183/384 debug2: bits set: 1028/2048 debug1: sending SSH2_MSG_KEXDH_INIT debug1: expecting SSH2_MSG_KEXDH_REPLY debug1: Host 'ub1' is known and matches the RSA host key. debug1: Found key in /mirror/mpiu/.ssh/known_hosts:1 debug2: bits set: 1039/2048 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /mirror/mpiu/.ssh/id_dsa (0xb874b098) debug1: Authentications that can continue: password,publickey debug1: Next authentication method: publickey debug1: Offering public key: /mirror/mpiu/.ssh/id_dsa debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: password,publickey debug2: we did not send a packet, disable method debug1: Next authentication method: password mpiu@ub1's password: I hangs here!

Read the article

Troubleshooting Website problems within the local network

- by HaydnWVN

Have an external website which opens fine on some PC's, yet seems to time out (or symptoms of timing out, but never actually does) on others. Seems to only affect (some) of our newer HP Pro 3305 MT Workstations. All of which are running Win7 32bit SP1 with all updates. Older PC's (Win7 32bit SP1 & WinXP) are unaffected. Using Google Chrome & Firefox makes no difference. Opening the website in IE9 Compatibility Mode has exactly the same symptoms. All PC's are on the same local network (Workgroup) using the same DNS server & gateway (inhouse) on the same internet connection, on the same subnet. There is no proxy server, no content filtering, no load balancing etc etc. Only group policy in effect (locally) is for Update scheduling. Local firewalls are all the same (Kaspersky WP4) and our external facing firewall has no IP specific settings. I have no control over the external website, traceroute shows the same destination on all PC's. It is a fairly popular website in our industry (Horticulture) and i'm not aware of any other people (even other sites within our sister companies) with the same problem. Update: Used Fiddler2 to monitor the HTTP request, seems its not getting fulfilled for some reason?! Request sent: GET http://www.rhs.org.uk/ HTTP/1.1 Host: www.rhs.org.uk Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 6.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-GB,en-US;q=0.8,en;q=0.6 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Log from Fiddler 2 of the request: This session is not yet complete. Press F5 to refresh when session is complete for updated statistics. Request Count: 1 Bytes Sent: 567 (headers:567; body:0) Bytes Received: 0 (headers:0; body:0) ACTUAL PERFORMANCE -------------- ClientConnected: 17:02:33.720 ClientBeginRequest: 17:02:39.118 GotRequestHeaders: 17:02:39.118 ClientDoneRequest: 17:02:39.118 Determine Gateway: 0ms DNS Lookup: 0ms TCP/IP Connect: 46ms HTTPS Handshake: 0ms ServerConnected: 17:02:39.165 FiddlerBeginRequest: 17:02:39.165 ServerGotRequest: 17:02:39.165 ServerBeginResponse: 00:00:00.000 GotResponseHeaders: 00:00:00.000 ServerDoneResponse: 00:00:00.000 ClientBeginResponse: 00:00:00.000 ClientDoneResponse: 00:00:00.000 RESPONSE BYTES (by Content-Type) -------------- ~headers~: 0 Log of a successful request from a working PC (done this morning, excuse the timestamps being different from above): Request Count: 1 Bytes Sent: 493 (headers:493; body:0) Bytes Received: 20,413 (headers:525; body:19,888) ACTUAL PERFORMANCE -------------- ClientConnected: 08:22:47.766 ClientBeginRequest: 08:22:47.766 GotRequestHeaders: 08:22:47.766 ClientDoneRequest: 08:22:47.766 Determine Gateway: 0ms DNS Lookup: 26ms TCP/IP Connect: 30ms HTTPS Handshake: 0ms ServerConnected: 08:22:47.828 FiddlerBeginRequest: 08:22:47.828 ServerGotRequest: 08:22:47.828 ServerBeginResponse: 08:22:48.905 GotResponseHeaders: 08:22:48.905 ServerDoneResponse: 08:22:48.905 ClientBeginResponse: 08:22:48.905 ClientDoneResponse: 08:22:48.905 Overall Elapsed: 00:00:01.1388020 RESPONSE BYTES (by Content-Type) -------------- text/html: 19,888 ~headers~: 525 So my question has evolved into: What is the difference between the 2 requests and how do I determine why 1 PC is not getting a reply to it's GET request?

Read the article

Trying to connect phpMyAdmin to remote mySQL server ( 2002: can't connect )

- by Malcolm Jones

Trying to get phpMyAdmin to talk to a remote mySQL server. The config is below and there is already a user set up in mySQL DB to be able to log in from the specified host that PMA sits on. Hosting is provided by Rackspace (Rightscale) and both cloud servers behind the same firewall. [config.inc.php] <?php $cfg['blowfish_secret'] = ''; $i = 0; $i++; $cfg['Servers'][$i]['host'] = 'XX.XX.XX.XX'; // MySQL hostname or IP address $cfg['Servers'][$i]['port'] = ''; // MySQL port - leave blank for default port $cfg['Servers'][$i]['socket'] = ''; // Path to the socket - leave blank for default socket $cfg['Servers'][$i]['connect_type'] = 'tcp'; // How to connect to MySQL server ('tcp' or 'socket') $cfg['Servers'][$i]['extension'] = 'mysql'; // The php MySQL extension to use ('mysql' or 'mysqli') $cfg['Servers'][$i]['compress'] = FALSE; // Use compressed protocol for the MySQL connection // (requires PHP >= 4.3.0) $cfg['Servers'][$i]['controluser'] = ''; // MySQL control user settings // (this user must have read-only $cfg['Servers'][$i]['controlpass'] = ''; // access to the "mysql/user" // and "mysql/db" tables). // The controluser is also // used for all relational // features (pmadb) $cfg['Servers'][$i]['auth_type'] = 'config'; // Authentication method (config, http or cookie based)? $cfg['Servers'][$i]['user'] = 'USERNAME'; // MySQL user $cfg['Servers'][$i]['password'] = 'PASSWORD'; // MySQL password (only needed // with 'config' auth_type) $cfg['Servers'][$i]['only_db'] = ''; // If set to a db-name, only // this db is displayed in left frame // It may also be an array of db-names, where sorting order is relevant. $cfg['Servers'][$i]['hide_db'] = ''; // Database name to be hidden from listings $cfg['Servers'][$i]['verbose'] = ''; // Verbose name for this host - leave blank to show the hostname $cfg['Servers'][$i]['pmadb'] = ''; // Database used for Relation, Bookmark and PDF Features // (see scripts/create_tables.sql) // - leave blank for no support // DEFAULT: 'phpmyadmin' $cfg['Servers'][$i]['bookmarktable'] = ''; // Bookmark table // - leave blank for no bookmark support // DEFAULT: 'pma_bookmark' $cfg['Servers'][$i]['relation'] = ''; // table to describe the relation between links (see doc) // - leave blank for no relation-links support // DEFAULT: 'pma_relation' $cfg['Servers'][$i]['table_info'] = ''; // table to describe the display fields // - leave blank for no display fields support // DEFAULT: 'pma_table_info' $cfg['Servers'][$i]['table_coords'] = ''; // table to describe the tables position for the PDF schema // - leave blank for no PDF schema support // DEFAULT: 'pma_table_coords' $cfg['Servers'][$i]['pdf_pages'] = ''; // table to describe pages of relationpdf // - leave blank if you don't want to use this // DEFAULT: 'pma_pdf_pages' $cfg['Servers'][$i]['column_info'] = ''; // table to store column information // - leave blank for no column comments/mime types // DEFAULT: 'pma_column_info' $cfg['Servers'][$i]['history'] = ''; // table to store SQL history // - leave blank for no SQL query history // DEFAULT: 'pma_history' $cfg['Servers'][$i]['verbose_check'] = TRUE; // set to FALSE if you know that your pma_* tables // are up to date. This prevents compatibility // checks and thereby increases performance. $cfg['Servers'][$i]['AllowRoot'] = TRUE; // whether to allow root login $cfg['Servers'][$i]['AllowDeny']['order'] // Host authentication order, leave blank to not use = ''; $cfg['Servers'][$i]['AllowDeny']['rules'] // Host authentication rules, leave blank for defaults = array(); Please let me know if you need anymore info. -- Malcolm

Read the article

How can I check if PHP was compiled with the UNICODE version of the Win32 API?

- by Wesley Murch

This is related to this Stack Overflow post: glob() can't find file names with multibyte characters on Windows? I'm having issues with PHP and files that have multibyte characters on Windows. Here's my test case: print_r(scandir('./uploads/')); print_r(glob('./uploads/*')); Correct Output on remote UNIX server: Array ( [0] => . [1] => .. [2] => filename-äöü.jpg [3] => filename.jpg [4] => test?test.jpg [5] => ??? ?????.jpg [6] => ?????????.jpg [7] => ???.jpg ) Array ( [0] => ./uploads/filename-äöü.jpg [1] => ./uploads/filename.jpg [2] => ./uploads/test?test.jpg [3] => ./uploads/??? ?????.jpg [4] => ./uploads/?????????.jpg [5] => ./uploads/???.jpg ) Incorrect Output locally on Windows: Array ( [0] => . [1] => .. [2] => ??? ?????.jpg [3] => ???.jpg [4] => ?????????.jpg [5] => filename-äöü.jpg [6] => filename.jpg [7] => test?test.jpg ) Array ( [0] => ./uploads/filename-äöü.jpg [1] => ./uploads/filename.jpg ) Here's a relevant excerpt from the answer I chose to accept (which actually is a quote from an article that was posted online over 2 years ago): From the comments on this article: http://www.rooftopsolutions.nl/blog/filesystem-encoding-and-php The output from your PHP installation on Windows is easy to explain : you installed the wrong version of PHP, and used a version not compiled to use the Unicode version of the Win32 API. For this reason, the filesystem calls used by PHP will use the legacy "ANSI" API and so the C/C++ libraries linked with this version of PHP will first try to convert yout UTF-8-encoded PHP string into the local "ANSI" codepage selected in the running environment (see the CHCP command before starting PHP from a command line window) Your version of Windows is MOST PROBABLY NOT responsible of this weird thing. Actually, this is YOUR version of PHP which is not compiled correctly, and that uses the legacy ANSI version of the Win32 API (for compatibility with the legacy 16-bit versions of Windows 95/98 whose filesystem support in the kernel actually had no direct support for Unicode, but used an internal conversion layer to convert Unicode to the local ANSI codepage before using the actual ANSI version of the API). Recompile PHP using the compiler option to use the UNICODE version of the Win32 API (which should be the default today, and anyway always the default for PHP installed on a server that will NEVER be Windows 95 or Windows 98...) I can't confirm whether this is my problem or not. I used phpinfo() and did not find anything interesting, but I wasn't sure what to look for. I've been using XAMPP for easy installations, so I'm really not sure exactly how it was installed. I'm using Windows 7, 64 bit - so forgive my ignorance, but I'm not even sure if "Win32" is relevant here. How can I check if my current version of PHP was compiled with the configuration mentioned above? PHP Version: 5.3.8 System: Windows NT WES-PC 6.1 build 7601 (Windows 7 Home Premium Edition Service Pack 1) i586 Build Date: Aug 23 2011 11:47:20 Compiler: MSVC9 (Visual C++ 2008) Architecture: x86 Configure Command: cscript /nologo configure.js "--enable-snapshot-build" "--disable-isapi" "--enable-debug-pack" "--disable-isapi" "--without-mssql" "--without-pdo-mssql" "--without-pi3web" "--with-pdo-oci=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=D:\php-sdk\oracle\instantclient11\sdk,shared" "--enable-object-out-dir=../obj/" "--enable-com-dotnet" "--with-mcrypt=static" "--disable-static-analyze"

Read the article

ActiveX component can't create Object Error? Check 64 bit Status

- by Rick Strahl

If you're running on IIS 7 and a 64 bit operating system you might run into the following error using ASP classic or ASP.NET with COM interop. In classic ASP applications the error will show up as: ActiveX component can't create object (Error 429) (actually without error handling the error just shows up as 500 error page) In my case the code that's been giving me problems has been a FoxPro COM object I'd been using to serve banner ads to some of my pages. The code basically looks up banners from a database table and displays them at random. The ASP classic code that uses it looks like this: <% Set banner = Server.CreateObject("wwBanner.aspBanner") banner.BannerFile = "wwsitebanners" Response.Write(banner.GetBanner(-1)) %> Originally this code had no specific error checking as above so the ASP pages just failed with 500 error pages from the Web server. To find out what the problem is this code is more useful at least for debugging: <% ON ERROR RESUME NEXT Set banner = Server.CreateObject("wwBanner.aspBanner") Response.Write(err.Number & " - " & err.Description) banner.BannerFile = "wwsitebanners" Response.Write(banner.GetBanner(-1)) %> which results in: 429 - ActiveX component can't create object which at least gives you a slight clue. In ASP.NET invoking the same COM object with code like this: <% dynamic banner = wwUtils.CreateComInstance("wwBanner.aspBanner") as dynamic; banner.cBANNERFILE = "wwsitebanners"; Response.Write(banner.getBanner(-1)); %> results in: Retrieving the COM class factory for component with CLSID {B5DCBB81-D5F5-11D2-B85E-00600889F23B} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). The class is in fact registered though and the COM server loads fine from a command prompt or other COM client. This error can be caused by a COM server that doesn't load. It looks like a COM registration error. There are a number of traditional reasons why this error can crop up of course. The server isn't registered (run regserver32 to register a DLL server or /regserver on an EXE server) Access permissions aren't set on the COM server (Web account has to be able to read the DLL ie. Network service) The COM server fails to load during initialization ie. failing during startup One thing I always do to check for COM errors fire up the server in a COM client outside of IIS and ensure that it works there first - it's almost always easier to debug a server outside of the Web environment. In my case I tried the server in Visual FoxPro on the server with: loBanners = CREATEOBJECT("wwBanner.aspBanner") loBanners.cBannerFile = "wwsitebanners" ? loBanners.GetBanner(-1) and it worked just fine. If you don't have a full dev environment on the server you can also use VBScript do the same thing and run the .vbs file from the command prompt: Set banner = Server.CreateObject("wwBanner.aspBanner") banner.BannerFile = "wwsitebanners" MsgBox(banner.getBanner(-1)) Since this both works it tells me the server is registered and working properly. This leaves startup failures or permissions as the problem. I double checked permissions for the Application Pool and the permissions of the folder where the DLL lives and both are properly set to allow access by the Application Pool impersonated user. Just to be sure I assigned an Admin user to the Application Pool but still no go. So now what? 64 bit Servers Ahoy A couple of weeks back I had set up a few of my Application pools to 64 bit mode. My server is Server 2008 64 bit and by default Application Pools run 64 bit. Originally when I installed the server I set up most of my Application Pools to 32 bit mainly for backwards compatibility. But as more of my code migrates to 64 bit OS's I figured it'd be a good idea to see how well code runs under 64 bit code. The transition has been mostly painless. Until today when I noticed the problem with the code above when scrolling to my IIS logs and noticing a lot of 500 errors on many of my ASP classic pages. The code in question in most of these pages deals with this single simple COM object. It took a while to figure out that the problem is caused by the Application Pool running in 64 bit mode. The issue is that 32 bit COM objects (ie. my old Visual FoxPro COM component) cannot be loaded in a 64 bit Application Pool. The ASP pages using this COM component broke on the day I switched my main Application Pool into 64 bit mode but I didn't find the problem until I searched my logs for errors by pure chance. To fix this is easy enough once you know what the problem is by switching the Application Pool to Enable 32-bit Applications: Once this is done the COM objects started working correctly again. 64 bit ASP and ASP.NET with DCOM Servers This is kind of off topic, but incidentally it's possible to load 32 bit DCOM (out of process) servers from ASP.NET and ASP classic even if those applications run in 64 bit application pools. In fact, in West Wind Web Connection I use this capability to run a 64 bit ASP.NET handler that talks to a 32 bit FoxPro COM server which allows West Wind Web Connection to run in native 64 bit mode without custom configuration (which is actually quite useful). It's probably not a common usage scenario but it's good to know that you can actually access 32 bit COM objects this way from ASP.NET. For West Wind Web Connection this works out well as the DCOM interface only makes one non-chatty call to the backend server that handles all the rest of the request processing. Application Pool Isolation is your Friend For me the recent incident of failure in the classic ASP pages has just been another reminder to be very careful with moving applications to 64 bit operation. There are many little traps when switching to 64 bit that are very difficult to track and test for. I described one issue I had a couple of months ago where one of the default ASP.NET filters was loading the wrong version (32bit instead of 64bit) which was extremely difficult to track down and was caused by a very sneaky configuration switch error (basically 3 different entries for the same ISAPI filter all with different bitness settings). It took me almost a full day to track this down). Recently I've been taken to isolate individual applications into separate Application Pools rather than my past practice of combining many apps into shared AppPools. This is a good practice assuming you have enough memory to make this work. Application Pool isolate provides more modularity and allows me to selectively move applications to 64 bit. The error above came about precisely because I moved one of my most populous app pools to 64 bit and forgot about the minimal COM object use in some of my old pages. It's easy to forget. To 64bit or Not Is it worth it to move to 64 bit? Currently I'd say -not really. In my - admittedly limited - testing I don't see any significant performance increases. In fact 64 bit apps just seem to consume considerably more memory (30-50% more in my pools on average) and performance is minimally improved (less than 5% at the very best) in the load testing I've performed on a couple of sites in both modes. The only real incentive for 64 bit would be applications that require huge data spaces that exceed the 32 bit 4 gigabyte memory limit. However I have a hard time imagining an application that needs 4 gigs of memory in a single Application Pool :-). Curious to hear other opinions on benefits of 64 bit operation. © Rick Strahl, West Wind Technologies, 2005-2011Posted in COM ASP.NET FoxPro

Read the article

The Windows Browser Ballot Screen Offers Web Browser Choice to European Users

- by Matthew Guay

Since March, our friends across the pond in Europe get to decide which browser they want to install with their Windows OS. Today we thought we would take a look at the ballot choices, some are well known, and others you may not have heard of. Windows users in European countries should start seeing the so called “Browser Ballot Screen” after installing the Windows Update KB976002 (link below). The browser ballot offers a dozen different browsers, including some you’ve likely never heard of. They each have some unique features, and are all free, and here we take a quick look at each of them. Internet Explorer 8 Internet Explorer is the world’s most used web browser, as it’s bundled with Windows. It also includes several unique features, including Accelerators that make it easy to search or find a map of a location, and InPrivate filtering to directly control what sites can get personal information. Additionally, it offers great integration with Windows Touch and the new taskbar in Windows 7. IE 8 runs on Windows XP and newer, and is bundled with Windows 7. Mozilla Firefox 3.6 Firefox is the most popular browser other than Internet Explorer. It is the modern descendant of Netscape, and is loved by web developers for its adherence to web standards, openness, and expandability. It offers thousands of Add-ons and themes to let you customize it to fit your preferences. The most recent version has added Personas, which are quick, lightweight themes to let you personalize the look your browser. It’s open source, and runs on all modern versions of Windows, Mac OS X, and Linux. Of course thanks to Asian Angel, our resident browser expert, you can check out several articles regarding this popular IE alternative. Google Chrome 4 Google Chrome has gained an impressive amount of market share during its short time in the market. It offers a minimalistic interface and fast speeds with intensive web applications. The address bar is also a search bar, so you can enter a search query or web address and quickly get the information you need. With version 4 you can add a growing number of extensions, personalize it with a variety of stylish themes, and automatically translate foreign websites into your own language. Opera 10.50 Although Opera has been around for over a decade, relatively few users have used it. With the new 10.50 release, Opera has many unique features packed in a sleek UI. It integrates great with Aero and the Windows 7 taskbar, and lets you preview the contents of your websites in the tab bar. It also includes Opera Unite, a small personal web server to make file sharing easy, Opera Turbo to speed up your internet when the connection is slow, and Opera Link to keep all your copies of Opera in sync. It’s a popular browser on many mobile devices, and version 10.50 has a lot of enhancements. Apple Safari 4 Safari is the default browser in Mac OS X, and starting with version 3 it has been available for Windows as well. It’s based on Webkit, the popular new rendering engine that provides great speed and standards compatibility. Safari 4 lets you browse your browsing history in a unique Coverflow interface, and shows your Top Sites in a fancy, 3D interface. It’s also great for viewing mobile websites for the iPhone and other mobile devices through Developer Tools. Flock 2.5 Based on the popular Firefox core, Flock brings a multitude of social features to your browsing experience. You can view the latest YouTube videos, Flickr pictures, update your favorite social network, and keep up with your webmail thanks to It’s integration with a wide variety of services. You can even post to your blog through the integrated blog editor. If your time online is mostly spent in social services, this may be a browser you want to check out. Maxthon 2.5 Maxthon is a unique browser that builds on Internet Explorer to bring more features with IE’s rendering. Formerly known as MyIE2, Maxthon was popular for bringing tabbed browsing with IE rendering during the days of IE 6. Today Maxthon supports a wide range of plugins and skins, so you can customize it however you want. It includes mouse gestures, a web accelerator to speed up pokey internet connections, a content blocker to remove unwanted content from sites, an online account to backup your favorites, and a nice download manager. Avant Browser Another nice browser based on Internet Explorer, Avant brings a wide variety of features in a nice brushed-metal interface. It includes an integrated AutoFill for forms, mouse gestures, customizable skins, and privacy protection features. It also includes a Flash blocker that will only load flash in webpages when you select them. You can also integrate Avant with an online account to store your bookmarks, feeds, settings and passwords online. Sleipnir Sleipnir is a customizable browser meant for advance users that is quite popular in Japan. It’s built on the Trident engine and virtually every aspect of is customizable unlike Internet Explorer. FlashPeak SlimBrowser SlimBrowser from FlashPeak incorporates a lot of features like Popup Killer, Auto Login, site filtering and more. It’s based on Internet Explorer but offers a lot more customizable options out of the box. K-meleon This basic browser is light on system resources and based on the Gecko engine. It’s been in development for years on SourceForge, and if you like to tweak virtually any aspect of your browser, this might be a good choice for you. GreenBrowser GreenBrowser is based on Internet Explorer and is available in several languages. It has a large amount of features out of the box and is light on system resources. Conclusion The European Union asked for more choices in the web browser they could choose from when installing Windows, and with the Browser Ballot Screen, they certainly get a variety to choose from. If you’ve tried out some of the lesser known browsers, or think some important ones have been left out, leave a comment and tell us about it. Learn More About the Browser Ballot Screen and Download Alternatives to IE Windows Update KB976002 Similar Articles Productive Geek Tips Set the Default Browser on Ubuntu From the Command LineQuick Tip: Empty Internet Explorer 7 Cache when Browser is ClosedView Hidden Files and Folders in Ubuntu File BrowserSet the Default Browser and Email Client in UbuntuAccess Multiple Browsers from Firefox with Browser View Plus TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

Read the article

Upgrading Windows 8 boot to VHD to Windows 8.1–Step by step guide

- by Liam Westley

Originally posted on: http://geekswithblogs.net/twickers/archive/2013/10/19/upgrading-windows-8-boot-to-vhd-to-windows-8.1ndashstep-by.aspxBoot to VHD – dual booting Windows 7 and Windows 8 became easy When Windows 8 arrived, quite a few people decided that they would still dual boot their machines, and instead of mucking about with resizing disk partitions to free up space for Windows 8 they decided to use the boot from VHD feature to create a huge hard disc image into which Windows 8 could be installed. Scott Hanselman wrote this installation guide, while I myself used the installation guide from Ed Bott of ZD net fame. Boot to VHD is a great solution, it achieves a dual boot, can be backed up easily and had virtually no effect on the original Windows 7 partition. As a developer who has dual booted Windows operating systems for years, hacking boot.ini files, the boot to VHD was a much easier solution. Upgrade to Windows 8.1 – ah, you can’t do that on a virtual disk installation (boot to VHD) Last week the final version of Windows 8.1 arrived, and I went into the Windows Store to upgrade. Luckily I’m on a fast download service, and use an SSD, because once the upgrade was downloaded and prepared Windows informed that This PC can’t run Windows 8.1, and provided the reason, You can’t install Windows on a virtual drive. You can see an image of the message and discussion that sparked my search for a solution in this Microsoft Technet forum post. I was determined not to have to resize partitions yet again and fiddle with VHD to disk utilities and back again, and in the end I did succeed in upgrading to a Windows 8.1 boot to VHD partition. It takes quite a bit of effort though … tldr; Simple steps of how you upgrade Boot into Windows 7 – make a copy of your Windows 8 VHD, to become Windows 8.1 Enable Hyper-V in your Windows 8 (the original boot to VHD partition) Create a new virtual machine, attaching the copy of your Windows 8 VHD Start the virtual machine, upgrade it via the Windows Store to Windows 8.1 Shutdown the virtual machine Boot into Windows 7 – use the bcedit tool to create a new Windows 8.1 boot to VHD option (pointing at the copy) Boot into the new Windows 8.1 option Reactivate Windows 8.1 (it will have become deactivated by running under Hyper-V) Remove the original Windows 8 VHD, and in Windows 7 use bcedit to remove it from the boot menu Things you’ll need A system that can run Hyper-V under Windows 8 (Intel i5, i7 class CPU) Enough space to have your original Windows 8 boot to VHD and a copy at the same time An ISO or DVD for Windows 8 to create a bootable Windows 8 partition Step by step guide Boot to your base o/s, the real one, Windows 7. Make a copy of the Windows 8 VHD file that you use to boot Windows 8 (via boot from VHD) – I copied it from a folder on C: called VHD-Win8 to VHD-Win8.1 on my N: drive. Reboot your system into Windows 8, and enable Hyper-V if not already present (this may require reboot) Use the Hyper-V manager , create a new Hyper-V machine, using half your system memory, and use the option to attach an existing VHD on the main IDE controller – this will be the new copy you made in Step 2. Start the virtual machine, use Connect to view it, and you’ll probably discover it cannot boot as there is no boot record If this is the case, go to Hyper-V manager, edit the Settings for the virtual machine to attach an ISO of a Windows 8 DVD to the second IDE controller. Start the virtual machine, use Connect to view it, and it should now attempt a fresh installation of Windows 8. You should select Advanced Options and choose Repair - this will make VHD bootable When the setup reboots your virtual machine, turn off the virtual machine, and remove the ISO of the Windows 8 DVD from the virtual machine settings. Start virtual machine, use Connect to view it. You will see the devices to be re-discovered (including your quad CPU becoming single CPU). Eventually you should see the Windows Login screen. You may notice that your desktop background (Win+D) will have turned black as your Windows installation has become deactivate due to the hardware changes between your real PC and Hyper-V. Fortunately becoming deactivated, does not stop you using the Windows Store, where you can select the update to Windows 8.1. You can now watch the progress joy of the Windows 8 update; downloading, preparing to update, checking compatibility, gathering info, preparing to restart, and finally, confirm restart - remember that you are restarting your virtual machine sitting on the copy of the VHD, not the Windows 8 boot to VHD you are currently using to run Hyper-V (confused yet?) After the reboot you get the real upgrade messages; setting up x%, xx%, (quite slow) After a while, Getting ready Applying PC Settings x%, xx% (really slow) Updating your system (fast) Setting up a few more things x%, (quite slow) Getting ready, again Accept license terms Express settings Confirmed previous password Next, I had to set up a Microsoft account – which is possibly now required, and not optional Using the Microsoft account required a 2 factor authorization, via text message, a 7 digit code for me Finalising settings Blank screen, HI .. We're setting up things for you (similar to original Windows 8 install) 'You can get new apps from the Store', below which is ’Installing your apps’ - I had Windows Media Center which is counts as an app from the Store ‘Taking care of a few things’, below which is ‘Installing your apps’ ‘Taking care of a few things’, below ‘Don't turn off your PC’ ‘Getting your apps ready’, below ‘Don't turn off your PC’ ‘Almost ready’, below ‘Don't turn off your PC’ … finally, we get the Windows 8.1 start menu, and a quick Win+D to check the desktop confirmed all the application icons I expected, pinned items on the taskbar, and one app moaning about a missing drive At this point the upgrade is complete – you can shutdown the virtual machine Reboot from the original Windows 8 and return to Windows 7 to configure booting to the Windows 8.1 copy of the VHD In an administrator command prompt do following use the bcdedit tool (from an MSDN blog about configuring VHD to boot in Windows 7) Type bcedit to list the current boot options, so you can copy the GUID (complete with brackets/braces) for the original Windows 8 boot to VHD Create a new menu option, copy of the Windows 8 option; bcdedit /copy {originalguid} /d "Windows 8.1" Point the new Windows 8.1 option to the copy of the VHD; bcdedit /set {newguid} device vhd=[D:]\Image.vhd Point the new Windows 8.1 option to the copy of the VHD; bcdedit /set {newguid} osdevice vhd=[D:]\Image.vhd Set autodetection of the HAL (may already be set); bcdedit /set {newguid} detecthal on Reboot from Windows 7 and select the new option 'Windows 8.1' on the boot menu, and you’ll have some messages to look at, as your hardware is redetected (as you are back from 1 CPU to 4 CPUs) ‘Getting devices ready, blank then %xx, with occasional blank screen, for the graphics driver, (fast-ish) Getting Ready message (fast) You will have to suffer one final reboots, choose 'Windows 8.1' and you can now login to a lovely Windows 8.1 start screen running on non virtualized hardware via boot to VHD After checking everything is running fine, you can now choose to Activate Windows, which for me was a toll free phone call to the automated system where you type in lots of numbers to be given a whole bunch of new activation codes. Once you’re happy with your new Windows 8.1 boot to VHD, and no longer need the Windows 8 boot to VHD, feel free to delete the old one. I do believe once you upgrade, you are no longer licensed to use it anyway. There, that was simple wasn’t it? Looking at the huge list of steps it took to perform this upgrade, you may wonder whether I think this is worth it. Well, I think it is worth booting to VHD. It makes backups a snap (go to Windows 7, copy the VHD, you backed up the o/s) and helps with disk management – want to move the o/s, you can move the VHD and repoint the boot menu to the new location. The downside is that Microsoft has complete neglected to support boot to VHD as an upgradable option. Quite a poor decision in my opinion, and if you read twitter and the forums quite a few people agree with that view. It’s a shame this got missed in the work on creating the upgrade packages for Windows 8.1.

Read the article

Solaris 10 branded zone VM Templates for Solaris 11 on OTN

- by jsavit

Early this year I wrote the article Ours Goes To 11 which describes the ability to import Solaris 10 systems into a "Solaris 10 branded zone" under Oracle Solaris 11. I did this using Solaris 11 Express, and the capability remains in Solaris 11 with only slight changes. This important tool lets you painlessly inhaling a Solaris Container from Solaris 10 or entire Solaris 10 systems ("the global zone") into virtualized environments on a Solaris 11 OS. Just recently, Oracle provided Oracle VM Templates for Oracle Solaris 10 Zones to let you create Solaris 10 branded zones for Solaris 11 even if you don't currently have access to install media or a running Solaris 10 system. To use this, just download the Oracle VM Template for Oracle Solaris Zone 10 from OTN at http://www.oracle.com/technetwork/server-storage/solaris11/downloads/virtual-machines-1355605.html. This page contains images of Oracle Solaris 10 8/11 (the recent update to Solaris 10) in SPARC and x86 formats suitable for creating branded zones. The same page also has a VirtualBox image you can download for a complete Solaris 10 install in a guest virtual machine you can run on any host OS that supports VirtualBox. Both sets of downloads provide a quick - and extremely easy - way to set up a virtual Solaris 10 environment. In the case of the Oracle VM Templates, they illustrate several advanced features of Solaris 11. To start, just go to the above link, download the template for the hardware platform (SPARC or x86) you want, and download the README file also linked from that page. Install prerequisites The README file tells you to install the prerequisite Solaris 11 package that implements the Solaris 10 brand. Then you can install instances of zones with that brand. # pkg install pkg:/system/zones/brand/brand-solaris10 Packages to install: 1 Create boot environment: No Create backup boot environment: Yes DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 44/44 0.4/0.4 PHASE ACTIONS Install Phase 74/74 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 That took only a few minutes, and didn't require a reboot. Install the Solaris 10 zone Now it's time to run the downloaded template file. First make it executable via the chmod command, of course. I found that (unlike stated in the README) there was no need to rename the downloaded file to remove the .bin. When you run it you provide several parameters to describe the zone configuration: -a IP address - the IP address and optional netmask for the zone. This is the only mandatory parameter. -z zonename - the name of the zone you would like to create. -i interface - the package will create an exclusive-IP zone using a virtual NIC (vnic) based on this physical interface. In my case, I have a NIC called rge0. -p PATH - specifies the path in which you want the zoneroot to be placed. In my case, I have a ZFS dataset mounted at /zones, and this will create a zoneroot at /zones/s10u10. Kicking it off, you will see a copyright message, and then messages showing progress building the zone, which only takes a few minutes. # ./solaris-10u10-x86.bin -p /zones -a 192.168.1.100 -i rge0 -z s10u10 ... ... Checking disk-space for extraction Ok Extracting in /export/home/CDimages/s10zone/bootimage.ihaqvh ... 100% [===============================] Checking data integrity Ok Checking platform compatibility The host and the image do not have the same Solaris release: host Solaris release: 5.11 image Solaris release: 5.10 Will create a Solaris 10 branded zone. Warning: could not find a defaultrouter Zone won't have any defaultrouter configured IMAGE: ./solaris-10u10-x86.bin ZONE: s10u10 ZONEPATH: /zones/s10u10 INTERFACE: rge0 VNIC: vnicZBI13379 MAC ADDR: 2:8:20:5c:1a:cc IP ADDR: 192.168.1.100 NETMASK: 255.255.255.0 DEFROUTER: NONE TIMEZONE: US/Arizona Checking disk-space for installation Ok Installing in /zones/s10u10 ... 100% [===============================] Using a static exclusive-IP Attaching s10u10 Booting s10u10 Waiting for boot to complete booting... booting... booting... Zone s10u10 booted The zone's root password has been set using the root password of the local host. You can change the zone's root password to further harden the security of the zone: being root, log into the zone from the local host with the command 'zlogin s10u10'. Once logged in, change the root password with the command 'passwd'. The nifty part in my opinion (besides being so easy), is that the zone was created as an exclusive-IP zone on a virtual NIC. This network configuration lets you enforce traffic isolation from other zones, enforce network Quality of Service, and even let the zone set its own characteristics like IP address and packet size. Independence of the zone's network characteristics from the global zone is one of the enhancements in Solaris 10 that make it easier to consolidate zones while preserving their autonomy, yet provide control in a consolidated environment. Let's see what the virtual network environment looks like by issuing commands from the Solaris 11 global zone. First I'll use Old School ifconfig, and then I'll use the new ipadm and dladm commands. # ifconfig -a4 lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 rge0: flags=1004943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,DHCP,IPv4> mtu 1500 index 2 inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 ether 0:14:d1:18:ac:bc vboxnet0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3 inet 192.168.56.1 netmask ffffff00 broadcast 192.168.56.255 ether 8:0:27:f8:62:1c # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE yge0 Ethernet unknown 0 unknown yge0 yge1 Ethernet unknown 0 unknown yge1 rge0 Ethernet up 1000 full rge0 vboxnet0 Ethernet up 1000 full vboxnet0 # dladm show-link LINK CLASS MTU STATE OVER yge0 phys 1500 unknown -- yge1 phys 1500 unknown -- rge0 phys 1500 up -- vboxnet0 phys 1500 up -- vnicZBI13379 vnic 1500 up rge0 s10u10/vnicZBI13379 vnic 1500 up rge0 s10u10/net0 vnic 1500 up rge0 # dladm show-vnic LINK OVER SPEED MACADDRESS MACADDRTYPE VID vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/net0 rge0 1000 2:8:20:9d:d0:79 random 0 # ipadm show-addr ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8 rge0/_a dhcp ok 192.168.1.3/24 vboxnet0/_a static ok 192.168.56.1/24 lo0/v6 static ok ::1/128 Log into the zone The install step already booted the zone, so lets log into it. Notice how you have to be appropriately privileged to log into a zone. This is my home system so I'm being a bit cavalier, but in a production environment you can give granular control of who can login to which zones. Voila! a Solaris 10 environment under a Solaris 11 kernel. Notice the output from the uname -a and ifconfig commands, and output from a ping to a nearby host. $ zlogin s10u10 zlogin: You lack sufficient privilege to run this command (all privs required) savit@home:~$ sudo zlogin s10u10 Password: [Connected to zone 's10u10' pts/5] Oracle Corporation SunOS 5.10 Generic Patch January 2005 # uname -a SunOS s10u10 5.10 Generic_Virtual i86pc i386 i86pc # ifconfig -a4 lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc # bash bash-3.2# ifconfig -a lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc bash-3.2# ping 192.168.1.2 192.168.1.2 is alive For fun, I configured Apache (setting its configuration file in /etc/apache2) and brought it up. Easy - took just a few minutes. bash-3.2# svcs apache2 STATE STIME FMRI disabled 12:38:46 svc:/network/http:apache2 bash-3.2# svcadm enable apache2 Summary In just a few minutes, I built a functioning virtual Solaris 10 environment under by Solaris 11 system. It was... easy! While I can still do it the manual way (creating and using a system archive), this is a low-effort way to create a Solaris 10 zone on Solaris 11.

Read the article

Make your CHM Help Files show HTML5 and CSS3 content

- by Rick Strahl

The HTML Help 1.0 specification aka CHM files, is pretty old. In fact, it's practically ancient as it was introduced in 1997 when Internet Explorer 4 was introduced. Html Help 1.0 is basically a completely HTML based Help system that uses a Help Viewer that internally uses Internet Explorer to render the HTML Help content. Because of its use of the Internet Explorer shell for rendering there were many security issues in the past, which resulted in locking down of the Web Browser control in Windows and also the Help Engine which caused some unfortunate side effects. Even so, CHM continues to be a popular help format because it is very easy to produce content for it, using plain HTML and because it works with many Windows application platforms out of the box. While there have been various attempts to replace CHM help files CHM files still seem to be a popular choice for many applications to display their help systems. The biggest alternative these days is no system based help at all, but links to online documentation. For Windows apps though it's still very common to see CHM help files and there are still a ton of CHM help out there and lots of tools (including our own West Wind Html Help Builder) that produce output for CHM files as well as Web output. Image is Everything and you ain't got it! One problem with the CHM engine is that it's stuck with an ancient Internet Explorer version for rendering. For example if you have help content that uses HTML5 or CSS3 content you might have an HTML Help topic like the following shown here in a full Web Browser instance of Internet Explorer: The page clearly uses some CSS3 features like rounded corners and box shadows that are rendered using plain CSS 3 features. Note that I used Internet Explorer on purpose here to demonstrate that IE9 on Windows 7 can properly render this content using some of the new features of CSS, but the same is true for all other recent versions of the major browsers (FireFox 3.1+, Safari 4.5+, WebKit 9+ etc.). Unfortunately if you take this nice and simple CSS3 content and run it through the HTML Help compiler to produce a CHM file the resulting output on the same machine looks a bit less flashy: All the CSS3 styling is gone and although the page display and functionality still works, but all the extra styling features are gone. This even though I am running this on a Windows 7 machine that has IE9 that should be able to render these CSS features. Bummer. Web Browser Control - perpetually stuck in IE 7 Mode The problem is the Web Browser/Shell Components in Windows. This component is and has been part of Windows for as long as Internet Explorer has been around, but the Web Browser control hasn't kept up with the latest versions of IE. In a nutshell the control is stuck in IE7 rendering mode for engine compatibility reasons by default. However, there is at least one way to fix this explicitly using Registry keys on a per application basis. The key point from that blog article is that you can override the IE rendering engine for a particular executable by setting one (or more) registry flags that tell the Windows Shell which version of the Internet Explorer rendering engine to load. An application that wishes to use a more recent version of Internet Explorer can then register itself during installation for the specific IE version desired and from then on the application will use that version of the Web Browser component. If the application is older than the specified version it falls back to the default version (IE 7 rendering). Forcing CHM files to display with IE9 (or later) Rendering Knowing that we can force the IE usage for a given process it's also possible to affect the CHM rendering by setting same keys on the executable that's hosting the CHM file. What that executable file is depends on the type of application as there are a number of ways that can launch the help engine. hh.exeThe standalone Windows CHM Help Viewer that launches when you launch a CHM from Windows Explorer. You can manually add hh.exe to the registry keys. YourApplication.exeIf you're using .NET or any tool that internally uses the hhControl ActiveX control to launch help content your application is your host. You should add your application's exe to the registry during application startup. foxhhelp9.exeIf you're building a FoxPro application that uses the built-in help features, foxhhelp9.exe is used to actually host the help controls. Make sure to add this executable to the registry. What to set You can configure the Internet Explorer version used for an application in the registry by specifying the executable file name and a value that specifies the IE version desired. There are two different sets of keys for 32 bit and 64 bit applications. 32 bit only or 64 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: hh.exe 32 bit on 64 bit machine: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: hh.exe Note that it's best to always set both values ideally when you install your application so it works regardless of which platform you run on. The value specified is a DWORD value and the interesting values are decimal 9000 for IE9 rendering mode depending on !DOCTYPE settings or 9999 for IE 9 standards mode always. You can use the same logic for 8000 and 8888 for IE8 and the final value of 7000 for IE7 (one has to wonder what they're going todo for version 10 to perpetuate that pattern). I think 9000 is the value you'd most likely want to use. 9000 means that IE9 will be used for rendering but unless the right doctypes are used (XHTML and HTML5 specifically) IE will still fall back into quirks mode as needed. This should allow existing pages to continue to use the fallback engine while new pages that have the proper HTML doctype set can take advantage of the newest features. Here's an example of how I set the registry keys in my Tarma Installmate registry configuration: Note that I set all three values both under the Software and Wow6432Node keys so that this works regardless of where these EXEs are launched from. Even though all apps are 32 bit apps, the 64 bit (the default one shown selected) key is often used. So, now once I've set the registry key for hh.exe I can now launch my CHM help file from Explorer and see the following CSS3 IE9 rendered display: Summary It sucks that we have to go through all these hoops to get what should be natural behavior for an application to support the latest features available on a system. But it shouldn't be a surprise - the Windows Help team (if there even is such a thing) has not been known for forward looking technologies. It's a pretty big hassle that we have to resort to setting registry keys in order to get the Web Browser control and the internal CHM engine to render itself properly but at least it's possible to make it work after all. Using this technique it's possible to ship an application with a help file and allow your CHM help to display with richer CSS markup and correct rendering using the stricter and more consistent XHTML or HTML5 doctypes. If you provide both Web help and in-application help (and why not if you're building from a single source) you now can side step the issue of your customers asking: Why does my help file look so much shittier than the online help… No more!© Rick Strahl, West Wind Technologies, 2005-2012Posted in HTML5 Help Html Help Builder Internet Explorer Windows Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Adding Volcanos and Options - Earthquake Locator, part 2

- by Bobby Diaz

Since volcanos are often associated with earthquakes, and vice versa, I decided to show recent volcanic activity on the Earthquake Locator map. I am pulling the data from a website created for a joint project between the Smithsonian's Global Volcanism Program and the US Geological Survey's Volcano Hazards Program, found here. They provide a Weekly Volcanic Activity Report as an RSS feed. I started implementing this new functionality by creating a new Volcano entity in the domain model and adding the following to the EarthquakeService class (I also factored out the common reading/parsing helper methods to a separate FeedReader class that can be used by multiple domain service classes): private static readonly string VolcanoFeedUrl = ConfigurationManager.AppSettings["VolcanoFeedUrl"]; /// <summary> /// Gets the volcano data for the previous week. /// </summary> /// <returns>A queryable collection of <see cref="Volcano"/> objects.</returns> public IQueryable<Volcano> GetVolcanos() { var feed = FeedReader.Load(VolcanoFeedUrl); var list = new List<Volcano>(); if ( feed != null ) { foreach ( var item in feed.Items ) { var quake = CreateVolcano(item); if ( quake != null ) { list.Add(quake); } } } return list.AsQueryable(); } /// <summary> /// Creates a <see cref="Volcano"/> object for each item in the RSS feed. /// </summary> /// <param name="item">The RSS item.</param> /// <returns></returns> private Volcano CreateVolcano(SyndicationItem item) { Volcano volcano = null; string title = item.Title.Text; string desc = item.Summary.Text; double? latitude = null; double? longitude = null; FeedReader.GetGeoRssPoint(item, out latitude, out longitude); if ( !String.IsNullOrEmpty(title) ) { title = title.Substring(0, title.IndexOf('-')); } if ( !String.IsNullOrEmpty(desc) ) { desc = String.Join("\n\n", desc .Replace("<p>", "") .Split( new string[] { "</p>" }, StringSplitOptions.RemoveEmptyEntries) .Select(s => s.Trim()) .ToArray()) .Trim(); } if ( latitude != null && longitude != null ) { volcano = new Volcano() { Id = item.Id, Title = title, Description = desc, Url = item.Links.Select(l => l.Uri.OriginalString).FirstOrDefault(), Latitude = latitude.GetValueOrDefault(), Longitude = longitude.GetValueOrDefault() }; } return volcano; } I then added the corresponding LoadVolcanos() method and Volcanos collection to the EarthquakeViewModel class in much the same way I did with the Earthquakes in my previous article in this series. Now that I am starting to add more information to the map, I wanted to give the user some options as to what is displayed and allowing them to choose what gets turned off. I have updated the MainPage.xaml to look like this: <UserControl x:Class="EarthquakeLocator.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:basic="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls" xmlns:bing="clr-namespace:Microsoft.Maps.MapControl;assembly=Microsoft.Maps.MapControl" xmlns:vm="clr-namespace:EarthquakeLocator.ViewModel" mc:Ignorable="d" d:DesignWidth="640" d:DesignHeight="480" > <UserControl.Resources> <DataTemplate x:Key="EarthquakeTemplate"> <Ellipse Fill="Red" Stroke="Black" StrokeThickness="1" Width="{Binding Size}" Height="{Binding Size}" bing:MapLayer.Position="{Binding Location}" bing:MapLayer.PositionOrigin="Center"> <ToolTipService.ToolTip> <StackPanel> <TextBlock Text="{Binding Title}" FontSize="14" FontWeight="Bold" /> <TextBlock Text="{Binding UtcTime}" /> <TextBlock Text="{Binding LocalTime}" /> <TextBlock Text="{Binding DepthDesc}" /> </StackPanel> </ToolTipService.ToolTip> </Ellipse> </DataTemplate> <DataTemplate x:Key="VolcanoTemplate"> <Polygon Fill="Gold" Stroke="Black" StrokeThickness="1" Points="0,10 5,0 10,10" bing:MapLayer.Position="{Binding Location}" bing:MapLayer.PositionOrigin="Center" MouseLeftButtonUp="Volcano_MouseLeftButtonUp"> <ToolTipService.ToolTip> <StackPanel> <TextBlock Text="{Binding Title}" FontSize="14" FontWeight="Bold" /> <TextBlock Text="Click icon for more information..." /> </StackPanel> </ToolTipService.ToolTip> </Polygon> </DataTemplate> </UserControl.Resources> <UserControl.DataContext> <vm:EarthquakeViewModel AutoLoadData="True" /> </UserControl.DataContext> <Grid x:Name="LayoutRoot"> <bing:Map x:Name="map" CredentialsProvider="--Your-Bing-Maps-Key--" Center="{Binding MapCenter, Mode=TwoWay}" ZoomLevel="{Binding ZoomLevel, Mode=TwoWay}"> <bing:MapItemsControl ItemsSource="{Binding Earthquakes}" ItemTemplate="{StaticResource EarthquakeTemplate}" /> <bing:MapItemsControl ItemsSource="{Binding Volcanos}" ItemTemplate="{StaticResource VolcanoTemplate}" /> </bing:Map> <basic:TabControl x:Name="tabs" VerticalAlignment="Bottom" MaxHeight="25" Opacity="0.7"> <basic:TabItem Margin="90,0,-90,0" MouseLeftButtonUp="TabItem_MouseLeftButtonUp"> <basic:TabItem.Header> <TextBlock x:Name="txtHeader" Text="Options" FontSize="13" FontWeight="Bold" /> </basic:TabItem.Header> <StackPanel Orientation="Horizontal"> <TextBlock Text="Earthquakes:" FontWeight="Bold" Margin="3" /> <StackPanel Margin="3"> <CheckBox Content=" < 4.0" IsChecked="{Binding ShowLt4, Mode=TwoWay}" /> <CheckBox Content="4.0 - 4.9" IsChecked="{Binding Show4s, Mode=TwoWay}" /> <CheckBox Content="5.0 - 5.9" IsChecked="{Binding Show5s, Mode=TwoWay}" /> </StackPanel> <StackPanel Margin="10,3,3,3"> <CheckBox Content="6.0 - 6.9" IsChecked="{Binding Show6s, Mode=TwoWay}" /> <CheckBox Content="7.0 - 7.9" IsChecked="{Binding Show7s, Mode=TwoWay}" /> <CheckBox Content="8.0 +" IsChecked="{Binding ShowGe8, Mode=TwoWay}" /> </StackPanel> <TextBlock Text="Other:" FontWeight="Bold" Margin="50,3,3,3" /> <StackPanel Margin="3"> <CheckBox Content="Volcanos" IsChecked="{Binding ShowVolcanos, Mode=TwoWay}" /> </StackPanel> </StackPanel> </basic:TabItem> </basic:TabControl> </Grid> </UserControl> Notice that I added a VolcanoTemplate that uses a triangle-shaped Polygon to represent the Volcano locations, and I also added a second <bing:MapItemsControl /> tag to the map to bind to the Volcanos collection. The TabControl found below the map houses the options panel that will present the user with several checkboxes so they can filter the different points based on type and other properties (i.e. Magnitude). Initially, the TabItem is collapsed to reduce it's footprint, but the screen shot below shows the options panel expanded to reveal the available settings: I have updated the Source Code and Live Demo to include these new features. Happy Mapping!

Read the article

SSH new connection begins to hang (not reject or terminate) after a day or so on Ubuntu 13.04 server

- by kross

Recently we upgraded the server from 12.04 LTS server to 13.04. All was well, including after a reboot. With all packages updated we began to see a strange issue, ssh works for a day or so (unclear on timing) then a later request for SSH hangs (cannot ctrl+c, nothing). It is up and serving webserver traffic etc. Port 22 is open (ips etc altered slightly for posting): nmap -T4 -A x.acme.com Starting Nmap 6.40 ( http://nmap.org ) at 2013-09-12 16:01 CDT Nmap scan report for x.acme.com (69.137.56.18) Host is up (0.026s latency). rDNS record for 69.137.56.18: c-69-137-56-18.hsd1.tn.provider.net Not shown: 998 filtered ports PORT STATE SERVICE VERSION 22/tcp open ssh OpenSSH 6.1p1 Debian 4 (protocol 2.0) | ssh-hostkey: 1024 54:d3:e3:38:44:f4:20:a4:e7:42:49:d0:a7:f1:3e:21 (DSA) | 2048 dc:21:77:3b:f4:4e:74:d0:87:33:14:40:04:68:33:a6 (RSA) |_256 45:69:10:79:5a:9f:0b:f0:66:15:39:87:b9:a1:37:f7 (ECDSA) 80/tcp open http Jetty 7.6.2.v20120308 | http-title: Log in as a Bamboo user - Atlassian Bamboo |_Requested resource was http://x.acme.com/userlogin!default.action;jsessionid=19v135zn8cl1tgso28fse4d50?os_destination=%2Fstart.action Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 12.89 seconds Here is the ssh -vvv: ssh -vvv x.acme.com OpenSSH_5.9p1, OpenSSL 0.9.8x 10 May 2012 debug1: Reading configuration data /Users/tfergeson/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to x.acme.com [69.137.56.18] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/Users/tfergeson/.ssh/id_rsa" as a RSA1 public key debug1: identity file /Users/tfergeson/.ssh/id_rsa type 1 debug1: identity file /Users/tfergeson/.ssh/id_rsa-cert type -1 debug1: identity file /Users/tfergeson/.ssh/id_dsa type -1 debug1: identity file /Users/tfergeson/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1p1 Debian-4 debug1: match: OpenSSH_6.1p1 Debian-4 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "x.acme.com" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:10 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 130/256 debug2: bits set: 503/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA dc:21:77:3b:f4:4e:74:d0:87:33:14:40:04:68:33:a6 debug3: load_hostkeys: loading entries for host "x.acme.com" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:10 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "69.137.56.18" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:6 debug3: load_hostkeys: loaded 1 keys debug1: Host 'x.acme.com' is known and matches the RSA host key. debug1: Found key in /Users/tfergeson/.ssh/known_hosts:10 debug2: bits set: 493/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /Users/tfergeson/.ssh/id_rsa (0x7ff189c1d7d0) debug2: key: /Users/tfergeson/.ssh/id_dsa (0x0) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/tfergeson/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 277 debug2: input_userauth_pk_ok: fp 3c:e5:29:6c:9d:27:d1:7d:e8:09:a2:e8:8e:6e:af:6f debug3: sign_and_send_pubkey: RSA 3c:e5:29:6c:9d:27:d1:7d:e8:09:a2:e8:8e:6e:af:6f debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). Authenticated to x.acme.com ([69.137.56.18]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: fd 3 setting TCP_NODELAY debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ATLAS_OPTS debug3: Ignored env rvm_bin_path debug3: Ignored env TERM_PROGRAM debug3: Ignored env GEM_HOME debug3: Ignored env SHELL debug3: Ignored env TERM debug3: Ignored env CLICOLOR debug3: Ignored env IRBRC debug3: Ignored env TMPDIR debug3: Ignored env Apple_PubSub_Socket_Render debug3: Ignored env TERM_PROGRAM_VERSION debug3: Ignored env MY_RUBY_HOME debug3: Ignored env TERM_SESSION_ID debug3: Ignored env USER debug3: Ignored env COMMAND_MODE debug3: Ignored env rvm_path debug3: Ignored env COM_GOOGLE_CHROME_FRAMEWORK_SERVICE_PROCESS/USERS/tfergeson/LIBRARY/APPLICATION_SUPPORT/GOOGLE/CHROME_SOCKET debug3: Ignored env JPDA_ADDRESS debug3: Ignored env APDK_HOME debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env Apple_Ubiquity_Message debug3: Ignored env __CF_USER_TEXT_ENCODING debug3: Ignored env rvm_sticky_flag debug3: Ignored env MAVEN_OPTS debug3: Ignored env LSCOLORS debug3: Ignored env rvm_prefix debug3: Ignored env PATH debug3: Ignored env PWD debug3: Ignored env JAVA_HOME debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env JPDA_TRANSPORT debug3: Ignored env rvm_version debug3: Ignored env M2_HOME debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env rvm_ruby_string debug3: Ignored env LOGNAME debug3: Ignored env M2_REPO debug3: Ignored env GEM_PATH debug3: Ignored env AWS_RDS_HOME debug3: Ignored env rvm_delete_flag debug3: Ignored env EC2_PRIVATE_KEY debug3: Ignored env RUBY_VERSION debug3: Ignored env SECURITYSESSIONID debug3: Ignored env EC2_CERT debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 I can hard reboot (only mac monitors at that location) and it will again be accessible. This now happens every single time. It is imperative that I get it sorted. The strange thing is that it behaves initially then starts to hang after several hours. I perused logs previously and nothing stood out. From the auth.log, I can see that it has allowed me in, but still I get nothing back on the client side: Sep 20 12:47:50 cbear sshd[25376]: Accepted publickey for tfergeson from 10.1.10.14 port 54631 ssh2 Sep 20 12:47:50 cbear sshd[25376]: pam_unix(sshd:session): session opened for user tfergeson by (uid=0) UPDATES: Still occurring even after setting UseDNS no and commenting out #session optional pam_mail.so standard noenv This does not appear to be a network/dns related issue, as all services running on the machine are as responsive and accessible as ever, with the exception of sshd. Any thoughts on where to start?

Search Results

Search found 2023 results on 81 pages for 'compatibility'.

Page 71/81 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78 | Next Page >

- by Dr Dork

- by Sheena

- by Ian Boyd

- by Edward Tanguay

- by Scott

- by James A. Rosen

- by Sam

- by Gigi

- by kevinegham

- by Dr Dork

- by scphantm

- by BrettRobi

- by Carlos Paulino

- by user145862

- by user40135

- by HaydnWVN

- by Malcolm Jones

- by Wesley Murch

- by Rick Strahl

- by Matthew Guay

- by Liam Westley

- by jsavit

- by Rick Strahl

- by Bobby Diaz

- by kross

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78 | Next Page >