Search Results

Search found 21678 results on 868 pages for 'network traffic'.

Page 69/868 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• Divide a network into two subnets of equal size

  - by kylex

  I have been given the following IP 192.168.14.137/25 and asked to divide the network into 2. This is what I've come up with: The subnet mask is therefore 255.255.255.128 The network address is 192.168.14.128 There are a total of 128 available addresses (including the network address and broadcast address) To divide the network we create to subnets: 192.168.14.128/26 192.168.14.192/26 This will have a subnet mask of 255.255.255.192 Am I missing anything, or is this correct?

  Read the article

• Build My Own Advertising Network

  - by clifgray

  I have a few ideas that I think would be pretty game changing for online advertising and I would like to build my own network but I don't know where to start. I know it will take a lot of time for major publishers to get on board but I am more curious about the technical side. What language/database model and framework are modern ad networks built on? Basically I want to build an advertising network that registers views per page and allows publishers to manage the look of their own ads and let's the users interact with the ads. Is there any good information on doing something like this or any framework you can suggest to build on? I know this would get complicated pretty fast so if you have suggestions for ad networks that let you customize them heavily I would be glad to hear your suggestions.

  Read the article

• Ad-hoc network(hot spot created) not detected by android phone

  - by Nirmik

  I created a hot spot via network wireless use as hotspot. Other laptops successfully detected the hot-spot,could connect and use it without any problem. But no android phone could detect it.! I tried with many android phones but none could.(I found out that even an ad-hoc created in windows is not detected by any phone) So is there anything wrong i am doing(rather i am not doing anything actually other than clicking on the "use as hotspt" button..but still..)? or is that the network cannot be shared with phones? and if not,how can i share it with phones?

  Read the article

• Cisco's Network Storage Targets Small Business

  The Small Business NSS 300 network storage line boasts faster performance and integrated business applications.

  Read the article

• Asus 1001P freezes after chaging network settings

  - by auntiquarian

  I'm running Ubuntu 11.04 on a Asus PC 1001P in a dual boot environment with XP. All has been running fine for several weeks, but: I've just changed ISP (from Tiscali to BT), and had already sorted out connection, registration, etc. on a Dell laptop. On the Asus I went into Ubuntu to alter the wireless network details (i.e. selected the new network, and entered the password). Ubuntu immediately started running slowly, and after rebooting it now freezes when it gets to the Ubuntu logo and gets no further. Please help, lovely Ubuntu experts.

  Read the article

• Accessing network shares through ASP.Net

  - by jkrebsbach

  In my impersonation enabled web site I needed to access files on a network share.  Running locally, everything worked fine. After deploying out to the dev server and hitting the web site from my PC, things fell apart. With impersonation enabled, we can access files on the server itself, but a network share is another story.  Accessing a share on another server, we encounter the infamous "double hop" situation, were the credentials have already been digested on the web server and are not available for the file server. We need to either expose the shared files to the identity IIS is running under, or create a new impersonation context.

  Read the article

• Ubuntu 12.04 - no wireless network recognized

  - by Itai

  I just installed Ubntu 12.04 along with WIN7 on the same laptop - Dell Vostro-3560. Now, on Win7 i can access to different wi-fi networks. However, when i am logging onto the Ubuntu section (after re-starting my laptop) - an error message appears: "Disconnected - you are now offline". When i take a look at my network menu (in the upper bar on the screen), i see that no network is found (and i have a few of them in the area...). I tried to look around but really could not find a concrete practical solution to this specific problem, would appreciate any solution from anyone out there that had this problem and solved it. Thanks... Itai

  Read the article

• Adding a 'network' USB printer

  - by AndrewK

  I have a HP Deskjet 1050a printer, hence the 'network' in the title. Its a bog standard USB home printer. I have it attached to my router (has a USB port in it). I have got it connected and working to with Win8 PC and also a MacBook Air. Can't seem to get it to add as a printer to my Xubuntu laptop(s). It doesn't get detected automatically (not an actual network printer) and i've tried multiple options to get it working. It seems to add it but when printing a test page its saying the printer isn't connected. Ping works fine so it can see it, just can't add it as a printer. With Win8 I had to create a port with the IP of the printer (192.168.1.253 in this case), is there an Ubuntu alternative to do this?

  Read the article

• PsExec Couldn't access Windows cannot find the network path

  - by Navan

  Hi , I given the below cmd using PsExec v1.96 psexec -u ADMIN_USER_NAME -p ADMIN_PWD I got the below error. Couldn't access Windows cannot find the network path. Verify that the network path is correct an d the destination computer is not busy or turned off. If Windows still cannot fi nd the network path, contact your network administrator. Thanks, Navan

  Read the article

• Ubuntu 12.10 Network Connection menu GUI doesnt work properly

  - by wax

  Many a times I have seen When I click on network connection(besides volume icon), I am unable to select any options. When I hover over VPN connections, the list shows nothing. I have added many VPNs. Network menu becomes non responsive to any clicks. This is annoying because I am not able to connect to any of the VPN connections. "Enable Wireless", "Edit Connections" or any other option doesnt work at all. Restarting ubuntu fixes this issue. But problem starts randomly again and restarting my laptop is the only way to fix it. Is this a known bug? Any ways to fix this prob?

  Read the article

• Remove "computer" and "network" categories from Nautilus sidebar (ubuntu 12.04 running Cinnamon 1.4)

  - by utnubu_user

  I am wondering if it is possibly to completely remove the "computer" and "network" categories from Nautilus sidebar. I would like to do this because the locations that fall under them cannot be edited and I don't use those. Instead, I prefer to specify my own locations which I can do through the Bookmarks. This is all fine, but the "computer" and "network" just sit there doing nothing (potentially distracting). It seems these categories are hardcoded in Nautilus 3.4.2? At least I can't find a way to remove them. Any suggestions are welcomed.

  Read the article

• Massive vehicular network simulator

  - by IvanK

  I am interested in making a vehicular network simulator (vehicular network as in vehicles can be equipped with radios and when they come in range they can talk with each other). I want to be able to scale to 1000s of nodes if not more. I am quite frankly torn on how to do, or even which language to use or whether I should instead be using some other piece of software/code. I know that this should depend on a lot of design decisions that I may have, but it would be great if somebody can point me towards the right direction. I was planning to use a multi-threaded architecture, but not sure whether it will add to the complication or make it easier. Also if I go for a multi-threaded architecutre, do you think that 'Go' language will be a good choice?

  Read the article

• Cannot find other computers on the network

  - by RDNY

  I have several issues trying to connect to my network. This is not the problem connecting to the Internet through the same router. All my computers are running Windows 7, Vista and XP Pro. I can't see them and they can't see me either. I've already install Ubuntu Studio 11.10 three times and still not showing the network icon at all. I'm new to UBUNTU and LINUX in general. I can't find my group name either.

  Read the article

• Wifi network stopped being visible (and usable) (Linksys wag320n)

  - by s427

  Basically, my wifi network simply stopped working for no apparent reason. It doesn't appear in the list of the available networks anymore. I can see all my neighbors' networks, but not mine. It's as if it doesn't exist anymore. The internet connection (non-wifi), which goes through the same modem/router, is fine though. I already had a similar problem about one year ago (see here: Wifi network SSID not visible ), just after buying this very modem. I finally got it to work after performing two factory resets and getting rid of the Cisco "Magic" software; but this time it's not working. I use a linksys router-modem (WAG320N) which is directly connected (via network cable) to my desktop computer (Windows 7). I have (mainly) two devices that use the wifi network: my phone (Samsung Galaxy Nexus) and an Asus tablet (TF201, aka Transformer Prime). I also resurrected an old laptop computer (Dell, running Windows XP) to test that, and it doesn't see anything either (apart from the 20 other wifi networks, of course ^^). This wifi network was working just fine and has been for about a year. I haven't touched the modem settings so I have no idea what's causing the problem. I tried: making my phone "forget" about my network, hoping it would see it again after that: no luck. re-entering the network informations (SSID/password) manually on my phone: still no luck (says it's not in range) exporting the modem configuration, resetting the modem (factory reset, via modem admin), restarting it, importing the configuration: nope. factory reset, turning it off for 15 minutes, restarting, re-factory reset, and entering the configuration manually: still nothing. Has anybody experienced something similar before? Have you any suggestion to fix that? Thanks in advance. PS: to clear things up, here are the settings of my modem regarding wifi: Basic wireless settings: Configuration: manual Radio Band: 2.4GHz Wireless Network Mode: B/G/N-Mixed SSID: s427 Channel Bandwidth: Wide - 40 MHz Channel Wide Channel: 9 - 2.452GHz Standard Channel: 11 - 2.462GHz SSID Broadcast: Enable Advanced Wireless Settings AP Isolation: Disable Authentication Type: Auto Basic Rate: Default Transmission Rate: Auto N Transmission Rate: Auto CTS Protection Mode: Disable Beacon Interval: 100 DTIM Interval: 1 Fragmentation Threshold: 2346 RTS Threshold: 2346

  Read the article

• Make Network Security Policies Successful

  Three tips on how to better engage your user base in information and network security protocols.

  Read the article

• Estimating file transfer time over network?

  - by rocko

  I am transferring file from one server to another. So, to estimate the time it would take to transfer some GB's of file over the network, I am pinging to that IP and taking the average time. For ex: i ping to 172.26.26.36 I get the average round trip time to be x ms, since ping send 32 bytes of data each time. I estimate speed of network to be 2*32*8(bits)/x = y Mbps -- multiplication with 2 because its average round trip time. So transferring 5GB of data will take 5000/y seconds Am I correct in my method of estimating time. If you find any mistake or any other good method please share.

  Read the article

• Linux does not connect to wireless network under Hyper-V with Windows 8

  - by Graznarak

  I have a VM I am trying to run under Hyper-V on Windows 8 Pro. I am using an Asus PDE-N15 adapter on the host machine. When I run Windows 8 in the VM it connects to the network and everything works. When I use Linux (Ubuntu 13.04 32-bit, Ubuntu 13.04 64-bit, Fedora, CentOS) it will not connect to the network. When I run ifconfig I see the adapter show up as eth0 with the correct HWaddr. I see that TX bytes 0, and RX bytes == 0. Could anyone help me figure out how to get this to work?

  Read the article

• IBM Enters the Network-Attached Storage Market

  Big Blue is the latest data storage vendor to offer extreme scale-out network attached storage.

  Read the article

• no more network connection Ubuntu 12.04 Server

  - by gerpol

  Since yesterday my 12.04 web server refuses to connect to the Internet. Also when I boot I'm seeing the "waiting for network config" message. After logging in I'm getting an error about the packages. Error text: E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_precise-updates_universe_i18n_Translation-en, E:The package lists or status file could not be parsed or opened. This is a production web server so I really could use some help with enabling the network connection again.

  Read the article

• tool for monitoring network traffic on Windows 7 Home

  - by Xah Lee

  for Windows 7 Home Edition: can anyone recommend a tool to monitor network traffic? either build-in or 3rd-party. I like to have a graph view (e.g. as in Task Manager) but also nice are tool that lets me see what IP/port that's incoming/outgoing. Command line is fine. Or even some tutorial. Thanks. (am old unix sys admin and web app dev. Though not much of a network admin and don't know much Windows. I need this tool just for my home PC, not in any pro capacity.)

  Read the article

• ASA 5510 Need to filter traffic log events to my iPhone

  - by drpcken

  For some reason I cannot update apps or download apps to any ios devices on my network (tried both iphone and ipads). When I'm at home on my own network everything works fine. This started about a week ago. I've configured my iphone with a static IP address and even used 4.2.2.2 as my dns to rule out that the issue is with my DNS Server. I'm looking at the SYSLOG in ASDM (Cisco ASA 5510) but Im not sure it is providing me enough info. It seems to be showing ACL blocks on my public ip address, but not individual client IP's, so I can't see whats going on. How can I setup a way to filter any incoming/outgoing traffic to my iPhone's static IP and try and troubleshoot this?

  Read the article

• Forwarding wifi traffic to wired pc

  - by brydgesk

  I'm trying to play around with Wireshark on my home network, and was wondering if there is a way to create a new connection on my PC that receives all wifi packets on the network. The PC is a wired Windows 7 machine, and I'm using DD-WRT on an Asus RT-N16 router. I'm not trying to hack anything, I have full admin access to the router itself. My searching has led me to articles about client bridges and repeater bridges, but none of them seemed to apply entirely to my situation. I'd like to continue using my standard wifi connection, but make my PC act as a repeater that receives all wifi traffic. Again, the PC has no wireless connection. I've used tcpdump which is installed on the router itself, but I'd be more comfortable analyzing the packets in Windows, as I'm trying to learn Wireshark. Thanks

  Read the article

• Mac OS X: pushing all traffic through a VMWare VM

  - by bj99

  I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

  Read the article

• How to protect your real time online shooter from potential bots

  - by Zaky German

  I'm looking to create a multiplayer top down shooter. While i've read about different topics, i can see them i've got some real challenges ahead, but i'm all up for it. One thing i can't understand is how am i supposed to be protecting the game from people who try to create bots? What i mean is, as far as i understand, it's impossible to protect the network traffic in a way that players won't be able to create programs that listen to what's going on and understand it. So what worries me is that people can create bots that listen to the current location of rival players, and send communication that mimic as if the player is shooting in the exact "perfect" location to win that match. So what kind of techniques are used to protect real time games from such bots? Also i'd like to mention that i've tried searching for discussions (as this sounds like something many people struggle with), but couldn't find anything about it specifically, only as a part of broader questions about networking in real time games. If i should have looked harder feel free to put me in my place :) Thanks alot!

  Read the article

• Disaster Recovery Example

  Previously, I use to work for a small internet company that sells dental plans online. Our primary focus concerning disaster prevention and recovery is on our corporate website and private intranet site. We had a multiphase disaster recovery plan that includes data redundancy, load balancing, and off-site monitoring. Data redundancy is a key aspect of our disaster recovery plan. The first phase of this is to replicate our data to multiple database servers and schedule daily backups of the databases that are stored off site. The next phase is the file replication of data amongst our web servers that are also backed up daily by our collocation. In addition to the files located on the server, files are also stored locally on development machines, and again backed up using version control software. Load balancing is another key aspect of our disaster recovery plan. Load balancing offers many benefits for our system, better performance, load distribution and increased availability. With our servers behind a load balancer our system has the ability to accept multiple requests simultaneously because the load is split between multiple servers. Plus if one server is slow or experiencing a failure the traffic is diverted amongst the other servers connected to the load balancer allowing the server to get back online. The final key to our disaster recovery plan is off-site monitoring that notifies all IT staff of any outages or errors on the main website encountered by the monitor. Messages are sent by email, voicemail, and SMS. According to Disasterrecovery.org, disaster recovery planning is the way companies successfully manage crises with minimal cost and effort and maximum speed compared to others that are forced to make decision out of desperation when disasters occur. In addition Sun Guard stated in 2009 that the first step in disaster recovery planning is to analyze company risks and factor in fixed costs for things like hardware, software, staffing and utilities, as well as indirect costs, such as floor space, power protection, physical and information security, and management. Also availability requirements need to be determined per application and system as well as the strategies for recovery.

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >