Search Results

Search found 2954 results on 119 pages for 'rick green turbo'.

Page 69/119 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• P4 vs. i3/i5 *T in power consumption and performance [migrated]

  - by Walter Zomb

  I am running an Intel P4 prescott with HT on my home server (linux file server on encrypted disks on software-RAID5 and virtualisation host for three further machines). The performance for this purpose is really okay. When the system is idle it consumes about 140W power. I am considering buying a new mainboard for an e.g. Intel i3-2100T or an Intel i5-2390T. Both are low power CPUs with a TDP about 40W. Has anyone experiences how much power a recent mainboard with one of these CPUs an 3-4 'green-energy' disks (6W each) consumes? Do I get underneath the 100W threshold? What's about the performance of these low power CPUs? Are they comparable to an Intel P4 with HT? regards, walter

  Read the article

• Movie colors are off on ubuntu using Movieplayer?

  - by chris

  I've been playing with a new SLR that also happens to record movies. When I try to view a movie using Movie Player, it plays fine, and the sound is there, but the colors are off - green grass is purple, and my golden retriever is a blue retriever. VLC reports that the file is broken, offers to repair it, and plays it with the same problem. The same file plays fine under WinXP with both Media Player and Quicktime, and with no problems under MacOS also with Quicktime. What's the problem, and how can I fix it?

  Read the article

• Org-mode lags in highlighting source

  - by quanticle

  I'm using org-mode to maintain my programming notes. This means I have lots of source code blocks, as follows. #+begin_src <language name> <code> #+end_src One thing I've noticed is that when I write the #+end_src, emacs doesn't color the source code as such. Yet, if I quit emacs and reopen the notes file (or force a refresh with the Org-Refresh/Reload-Refresh setup current buffer menu entry) the source is colored grey if I'm using the GUI or green if I'm using emacs in the terminal. Is this an inherent limitation of emacs, or am I doing something wrong in setting up my code blocks that's preventing emacs from going back and recoloring the source code that I've entered?

  Read the article

• Reverse proxy 502 bad gateway

  - by Brian Graham

  I have setup a subdomain to proxy my plesk panel, but when saving pages I am getting 502 Bad Gateway error instead of a completion message. I am running CentOS 6. Here is my vhost.conf configuration for http://plesk.domain.tld/: RewriteEngine On RewriteCond %{SERVER_PORT} ^80$ RewriteRule $ https://plesk.domain.tld/ [R,L] Here is my vhost_ssl.conf configuration for https://plesk.domain.tld/: SSLProxyEngine On <Location /> ProxyPass https://localhost:8443/ ProxyPassReverse https://localhost:8443/ </Location> I have more than enough (and I have even checked) RAM, CPU and HDD. There are no spikes. As well, the posted information does save, it just errors when trying to show me a "This information has been saved." green/red block. Here is the relevent error from /var/log/nginx/error.log (IP/Host Filtered): 2014/05/29 02:42:41 [error] 8046#0: *402 upstream prematurely closed connection while reading response header from upstream, client: 173.238.XX.XX, server: plesk.domain.tld, request: "POST /smb/web/edit HTTP/1.1", upstream: "https://198.100.XX.XX:7081/smb/web/edit", host: "plesk.domain.tld", referrer: "https://plesk.domain.tld/smb/web/edit"

  Read the article

• MBP Bluetooth PAN connection with iPhone 4

  - by Chetan Sachdev

  I am trying to share MBP(OSX 10.8.3) internet connection with iPhone 4 (iOS 6) using Bluetooth PAN(Personal Area Network). Problem is Bluetooth PAN is not getting an ip address. I have tried to renew DHCP lease but nothing works. When I give a Manual IP address, the Bluetooth PAN goes green but doesn't shows the connection in iPhone. Is it possible to share the internet connection via Bluetooth. Note: I don't want to create an Ad-hoc connection over wifi.

  Read the article

• Fujitsu Siemens V6535 laptop doesn't wake up - crash when going into standby?

  - by marc

  I'm having trouble with my laptop (Fujitsu Siemens model V6535). It runs Windows 7, and after I upgraded from Vista I've noticed something that makes me really angry. When my laptop goes into Standby, the power LED changes to red and starts blinking (standby mode). When I push the power button to wake it up it, the blinking LED changes to green but nothing else happens. Nothing on the display, no HDD sound. When I press the power button for a few seconds and then try turn it on again, it doesn't display anything. I have to unplug the charger, shut it off, and power it on again without the power cable. Then it starts working. A few days ago I upgraded the BIOS to the newest version, but it doesn't help. Does anyone have any idea what can be wrong?

  Read the article

• Bit of python help

  - by user42780

  I've tried to get this to work, but it just freezes. It should display a pyramid, but all it does is.. halts. from graphics import * valid_colours = ['red', 'blue', 'yellow', 'green'] colour = ['', '', ''] while True: colour[0] = raw_input("Enter your first colour: ") colour[1] = raw_input("Enter your second colour: ") colour[2] = raw_input("Enter your third colour: ") if ((colour[0] and colour[1] and colour[2]) in valid_colours): break while True: width = raw_input("Enter a width between 2-7: ") if width.isdigit(): if (int(width) <= 7 and int(width) >= 2): break width = int(width) win = GraphWin("My Mini Project ", 1000, 1000) # 1000 \ 20 = 50 win.setCoords(0 , 0 , 20, 20) p1 = [0, 2] while width > 0: p = [1, 3] loopWidth = 0 while loopWidth < width: loopWidth = loopWidth + 1 c = 0 while c <= 10: c = c + 1 if c % 2: colour = "white" else: colour = "red" rectangle = Rectangle(Point(p[0],p1[0]), Point(p[1], p1[1])) rectangle.setFill(colour) rectangle.setOutline("black") rectangle.draw(win) p[0] = p[0] + 0.2 p1[0] = p1[0] + 0.2 p[0] = p[0] - 2 p1[0] = p1[0] - 2 p[0] = p[0] + 2 p[1] = p[1] + 2 width = width - 1 p1[0] = p1[0] + 2 p1[1] = p1[1] + 2

  Read the article

• HP proliant dl360 g5 fails to reboot

  - by user1039384

  Some history of this also available here. As of my latest update on the forum linked above, now cold reboot as well as hard reset and following boot for my proliant dl360 g5 works as expected and successfully boot the system. However, soft-reboot results in internal health indicator turning RED on the front and long beeps every around 6seconds until I either cold reboot or press and hold the power button. A summary of system state when this happens: Internal Health led indicator: RED External Health led indicator: Green No led next to any component is red or amber No POST message neither on the video output nor on IML logs (verified both at the time issue occures and after cold reboot that boots the system successfully). Any thoughts please share. I hope we can knock this issue down together with your help!

  Read the article

• New monitor connected to HDMI adaptor doesn't show output after booting

  - by Paul

  Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you. Thank you Anees Bakrain Only the ATI Radeon HD 4300/4500 Series adapter is displayed in the Device Manager, for that reason I have to assume that the onboard display adaptor is not active. All 40 drivers of Sarastro2 are up to date and the HDMI cable can not be the problem because both monitors displayed the boot sequence up to the moment when Windows 7 was loaded completely. This was the moment, when the Asus monitor lost its signal. Both connectors, HDMI and DVI are connected and removing the DVI connector would not solve my problem of running both monitors simultaneously. However, your suggestions shifted my seventy one year old brain into the next gear. The only question remaining is; “Why the signals to the Asus monitor stop after the sequence is complete”. The ATI Radeon HD 4300/4500 Series adapter seems to be capable of sending simultaneous HDMI and DVI signals, what is done during the boot sequence. Why do the signals change after the boot sequence is complete is the key question or der springende Punkt? Is this a correct assumption slhck?

  Read the article

• Plesk 9 VPS - Doesn't reply to NameServer requests (nslookup, etc)

  - by Ben

  Hi, I'm trying to troubleshoot a problem with a new VPS i'm setting up. The VPS is running Plesk 9 on a CentOS 5 system. Everything works fine, except it doesn't serve dns requests. If I try something like nslookup [somedomain.com] the.ser.ver.ip to test a DNS query, i get the following error ;; connection timed out; no servers could be reached I can't telnet to it on port 42 either.. I'm guessing something is blocking the requests.. firewall maybe? the plesk firewall module is installed and the nameservers entry is green. Any other way I can check what's blocking it on the server? Any help/tip greatly appreciated. Note: http works, i can telnet to the server on port 80 and i can also ping the server Thanks

  Read the article

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by marcipollo

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• Juniper J4350 out of order

  - by Benjamin Baron

  I have got two (2) Juniper routers J4350 that are out of order : All the interfaces are down (leds on the interfaces don't ligthen, ping dosen't respond) No output on the console port (even when booting) I've tried to reset the router (holding the RESET CONFIG button on the front panel during 15 seconds) and nothing happened, even while booting the device I've opened the router to check the fans. I've removed some dust and nothing has changed. I wanted to precise that the leds on the front panel are all on: The POWER led is green The STATUS led is red The ALARM led is on and is orange The HA (High Availablity) is on and orange as well I have found nothing on the Internet to solve this problem... Thank you for helping me :)

  Read the article

• terminal tools and logs for debugging TCP issues

  - by kellogs

  I have a server which I am testing for functionality (not load, not stress) with tsung. 50 users / second, 100 total users. Judging from tsung (tsung is the testing framework) graphs, there TCP connections (red line) drops to 0 while the commenced user sessions (green line) does not. Server logs show nothing to be gripping onto, so I am speculating some kind of TCP issue. Should this be the case ? Where would I look further on the server, any logs / tools to be looking at ? Only SSH available, no GUI. > root@XMPP:~# cat /etc/lsb-release > DISTRIB_ID=Ubuntu > DISTRIB_RELEASE=11.10 > DISTRIB_CODENAME=oneiric > DISTRIB_DESCRIPTION="Ubuntu 11.10" Thank you

  Read the article

• Microsoft Basic Office 2007 Activation Keys won't work after re-installing on my Laptop

  - by Rolnik

  So, I've upgraded my hard-drive on my laptop, and proceeded to grab my trusty copper-faced Official MS Office disk to do an install. I have three licenses with the fancy green-blue paper that identifies the license keys. Problem is, that for each of these license keys, when the Office 2007 software asks that I enter the "Product Key" it states: The key is incorrect. Verify that you have the correct key, and then retype it Why would Microsoft want to inhibit/prohibit re-installs on the same machine that the software was initially installed to? Incidentally, the same goofy error happens with each of the three valid product key (activation keys) that I enter.

  Read the article

• 13-inch Macbook Pro Battery Not Charging

  - by hkhalidz

  I have a 13 inch Macbook Pro. From last night on, it says 'Battery Not Charging'. The charger's light is always green and if I remove the charger it turns off(means the battery is completely empty). I tried reseting the PRAM and SMC, but not dice. I also tried using different chargers with out any success. The Macbook Pro is from the new generations and is over a year old. The Power Information section indicates 458 for the Power Cycles. Any help would be greatly appreciated.

  Read the article

• Using Gentoo's `ebegin`, `eend` etc under Ubuntu

  - by Marcus Downing

  We're quite fond of the style of the ebegin, eend, eerror, eindent etc commands used by Portage and other tools on Gentoo. The green-yellow-red bullets and standard layout make for very quick spotting of errors, on what would otherwise be very grey command line output. #!/bin/sh source /etc/init.d/functions.sh ebegin "Copying data" rsync .... eend $? Producing output similar to: * Copying data... [ OK ] As a result we're using these commands in some of our common shell scripts, which is a problem for the people using Ubuntu and other linuxes. (linuces? linuxen? linucae? other distros) On Gentoo these functions are provided by OpenRC, and imported with functions.sh file (whose exact position seems to vary slightly). But is there a simple way of getting these commands on Ubuntu? In theory we could replace them all with dull echos, but we'd rather not?

  Read the article

• Monitor turns off about 1 second after turning it on

  - by r0ca

  Hi all! I have a hardware issue with some of the LCD monitors we have in our office. My problems is not related to video cards or anything else with the computer itself. I have 2 Dell 17" LCD screens that goes off (blank) after 1 or 2 seconds. The light remains green so it's not idling or sleeping. Just this morning, I had to replace one that goes off on 2 workstations and also on my laptop. Nothing to do with it. I tried the VGA and DVI connection w/out luck. I strongly think that this is something with a capacitor or something inside the screen but I can't figure out what it is... Is anybody heard of that kind of issue before? Regards, David.

  Read the article

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by user10321

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• File ownership and permissions on web site PHP files

  - by columbo

  Hello, I am learning the basics of linux servers so I am green. I have an Ubuntu server upon which there are websites that I have inherited. In a fit of security worry I decided to check out the ownership of the web site files. They are all 2016:sites. If I run the command 'cat /etc/group | more' I can see that the group exists. But when I run 'lastlog' the user 2016 does not appear. I started to worry that 2016 might be the username of web users connecting from the web so I set the permissions on a testfile to chmod 600, giving read permissions to only the file owner. Sure enough I could still access the file from the web. Can anyone suggest what is going on here? I tried creating a new user and giving them file ownership but then when I access the file from the web it wants me to have all directories up stream owned by the same person. Thanks

  Read the article

• Colour table cells in Microsoft Word after mail merge

  - by James

  I have an Excel spreadsheet of student data. For each of 30 topics, students are traffic lighted R, A or G (for red, amber, green) in the spreadsheet. I am mail merging individual result print-outs in Word 2010. However, rather than printing the letter R/A/G next to each topic, I would rather change the background colour of the cell to that colour. How can I do this? Is there an option with merge fields or can it be done with a macro (please provide sample code if so - I don't have experience with macros!)

  Read the article

• Macbook Pro 15-inch replacement battery.

  - by ricbax

  So I've finally got to the 300+ cycles with my MBP 2008's original battery. Apple is pretty much "on the money" too! I am at 79% Health and getting the Condition: Replace Soon warning. So I went out to the closest Apple Store and bought a replacement. I would like to get the same lifespan out of my replacement if possible. My question is: The battery comes with a 2 dot (green) charge on the indicator, should I put the battery in and let it run down and do a full recharge OR begin charging it immediately and then let it run all the way to empty and recharge?

  Read the article

• Slow LAN transfer from 3rd party computer

  - by Chris

  Hi Everyone, I've got an odd problem that I'm not really sure where to start the troubleshooting process. I have a 'server' with Windows Server 2008R2 (64-bit) installed and it has a couple of hard drives. If I Remote Desktop into the server and transfer files from one HD to the other, all it fine. If however, I use my workstation (Windows 7 64bit) and open up a shared resource on the server and transfer a file from one hard drive on the server to another HD on the server (not using Remote Desktop, just Windows explorer/Network places), the transfer crawls... It takes about 5mins to discover files/calculate the transfer and then starts transferring at speeds like 56KB/s - 200KB/s. Both machines have Marvel GigE network ports with a TrendNet 8-port green GigE switch. I've set Jumbo packets to 9K on both machines...

  Read the article

• LAN cable not connected, but it is

  - by Koen

  I have a Windows XP SP2 desktop PC. It connects to the internet with a LAN cable (there's a wireless router for my laptop in between). The problem should be software because: when i tried connecting the same LAN cable to my laptop it works when i plugin the LAN cable (onboard) the green light is on and the orange light flickers when i tried the other cable (that feeds the wireless router) i have the same problem it worked a few days ago, nothing specific changed I tried removing the ethernet card from the device manager, and windows automatically reinstalled it. What could cause this? What can I try?

  Read the article

• XP Mode under Win 7 Professional: Windows Activation Update failure despite activated Windows

  - by Cristina

  I am trying to install Windows XP Mode from here: http://www.microsoft.com/windows/virtual-pc/download.aspx (the Hardware-Assisted Virtualization Detection Tool has given me the green for proceeding) Even though my Windows has been activated a year or so ago, the download button leads me to a splash screen saying "Windows validation required". I am next forced to download a WindowsActivationUpdate.exe which, after downloading some mysterious "update", fails with the error message "Update installation failed, error information 0x80070002" (rough translation from German). I've tried running it both normally and as Administrator. What could be the problem?

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >