Search Results

Search found 19425 results on 777 pages for 'output clause'.

Page 692/777 | < Previous Page | 688 689 690 691 692 693 694 695 696 697 698 699  | Next Page >

  • csync2 ERROR: Connection to remote host failed

    - by Emil Salama
    I was unable to find any articles to answer this question, so my best bet was to post this here: Scenario We have 2x application servers in production hosting a PHP website and I would like some folders to be syncronized between the 2, the same was setup for the development environment with no issues, I've followed all instructions from the URL "http://www.cloudedify.com/synchronising-files-in-cloud-with-csync2/", I still seem to have the same result, firewall has been disabled on both boxes for troubeshooting purposes: Config Files: cysnc2.cfg nossl * *; group production { host server1; host server2; key /etc/csync-production-group.key; include /etc/httpd/sites-available; include /xxxxxx/public_html/files include /xxxxxxx/magento/media/catalog/product include /xxxxxxx/magento/media/brands exclude *.log; exclude /xxxx/public_html/file/cache; exclude /xxxxx/public_html/magento/var/cache; exclude /xxxx/public_html/logs; exclude /xxxxx/public_html/magento/var/log; backup-directory /data/sync-conflicts/; backup-generations 2; auto younger; } /etc/xinetd.d/csync2 csync2.cfg service csync2 { disable = no flags = REUSE socket_type = stream wait = no user = root group = root server = /usr/sbin/csync2 server_args = -i -D /data/sync-db/ port = 30865 type = UNLISTED log_type = FILE /data/logs/csync2/csync2-xinetd.log log_on_failure += USERID } I've made sure that the daemon is listening on both server on port 30865 and the keys matched on both servers I've run a tcpdump on each server, output as follows: 12:20:31.366771 IP server1.49919 server2.csync2: Flags [S], seq 445156159, win 14600, options [mss 1460,sackOK,TS val 794864936 ecr 0,nop,wscale 7], length 0 12:20:31.366810 IP server2.csync2 server1.49919: Flags [S.], seq 450593575, ack 445156160, win 14480, options [mss 1460,sackOK,TS val 794798911 ecr 794864936,nop,wscale 7], length 0 12:20:31.367101 IP server1.49919 server2.csync2: Flags [.], ack 1, win 115, options [nop,nop,TS val 794864937 ecr 794798911], length 0 12:20:31.367138 IP server1.49919 server2.csync2: Flags [P.], seq 1:9, ack 1, win 115, options [nop,nop,TS val 794864937 ecr 794798911], length 8 12:20:31.367147 IP server2.csync2 server1.49919: Flags [.], ack 9, win 114, options [nop,nop,TS val 794798912 ecr 794864937], length 0 12:20:31.368625 IP server2.csync2 server1.49919: Flags [R.], seq 1, ack 9, win 114, options [nop,nop,TS val 794798913 ecr 794864937], length 0 Is there anything else i'm missing or should be doing?

    Read the article

  • Why can blocked IPs get through my iptables? What's wrong with this configuration?

    - by NeedSomeHelp
    (Why can/How are) blocked IPs (get/getting) through my iptables? Hello and thanks for your consideration... I have configured iptables and included (below) output from the command "iptables --line-numbers -n -L" yet IP addresses (like 31.41.219.180) from IP blocks I have already blocked are getting through. Please take a look and share any input you may have. Thank you. P.S. The initial ACCEPT IP addresses are for CloudFlare. . Chain INPUT (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 32267 14M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW reject-with tcp-reset 3 149 8570 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 4 434 25606 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 5 0 0 ACCEPT udp -- * * 103.21.244.0/22 0.0.0.0/0 6 0 0 ACCEPT udp -- * * 103.22.200.0/22 0.0.0.0/0 7 0 0 ACCEPT udp -- * * 103.31.4.0/22 0.0.0.0/0 8 0 0 ACCEPT udp -- * * 104.16.0.0/12 0.0.0.0/0 9 0 0 ACCEPT udp -- * * 108.162.192.0/18 0.0.0.0/0 10 0 0 ACCEPT udp -- * * 141.101.64.0/18 0.0.0.0/0 11 0 0 ACCEPT udp -- * * 162.158.0.0/15 0.0.0.0/0 12 0 0 ACCEPT udp -- * * 173.245.48.0/20 0.0.0.0/0 13 0 0 ACCEPT udp -- * * 188.114.96.0/20 0.0.0.0/0 14 0 0 ACCEPT udp -- * * 190.93.240.0/20 0.0.0.0/0 15 0 0 ACCEPT udp -- * * 197.234.240.0/22 0.0.0.0/0 16 0 0 ACCEPT udp -- * * 198.41.128.0/17 0.0.0.0/0 17 0 0 ACCEPT udp -- * * 199.27.128.0/21 0.0.0.0/0 18 0 0 ACCEPT tcp -- * * 103.21.244.0/22 0.0.0.0/0 19 9 468 ACCEPT tcp -- * * 103.22.200.0/22 0.0.0.0/0 20 0 0 ACCEPT tcp -- * * 103.31.4.0/22 0.0.0.0/0 21 0 0 ACCEPT tcp -- * * 104.16.0.0/12 0.0.0.0/0 22 858 44616 ACCEPT tcp -- * * 108.162.192.0/18 0.0.0.0/0 23 376 19552 ACCEPT tcp -- * * 141.101.64.0/18 0.0.0.0/0 24 0 0 ACCEPT tcp -- * * 162.158.0.0/15 0.0.0.0/0 25 257 13364 ACCEPT tcp -- * * 173.245.48.0/20 0.0.0.0/0 26 0 0 ACCEPT tcp -- * * 188.114.96.0/20 0.0.0.0/0 27 0 0 ACCEPT tcp -- * * 190.93.240.0/20 0.0.0.0/0 28 0 0 ACCEPT tcp -- * * 197.234.240.0/22 0.0.0.0/0 29 0 0 ACCEPT tcp -- * * 198.41.128.0/17 0.0.0.0/0 30 92 4784 ACCEPT tcp -- * * 199.27.128.0/21 0.0.0.0/0 31 0 0 DROP tcp -- * * 1.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 32 0 0 DROP tcp -- * * 101.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 33 0 0 DROP tcp -- * * 102.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 34 0 0 DROP tcp -- * * 103.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 35 18 1080 DROP tcp -- * * 109.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 36 0 0 DROP tcp -- * * 112.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 37 12 656 DROP tcp -- * * 113.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 38 0 0 DROP tcp -- * * 114.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 39 0 0 DROP tcp -- * * 115.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 40 8 352 DROP tcp -- * * 116.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 41 0 0 DROP tcp -- * * 117.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 42 0 0 DROP tcp -- * * 118.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 43 2 120 DROP tcp -- * * 119.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 44 0 0 DROP tcp -- * * 120.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 45 0 0 DROP tcp -- * * 121.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 46 4 160 DROP tcp -- * * 122.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 47 4 240 DROP tcp -- * * 123.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 48 0 0 DROP tcp -- * * 125.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 49 0 0 DROP tcp -- * * 134.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 50 0 0 DROP tcp -- * * 146.185.0.0/16 0.0.0.0/0 tcp dpts:1:50000 51 6 360 DROP tcp -- * * 148.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 52 0 0 DROP tcp -- * * 151.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 53 0 0 DROP tcp -- * * 175.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 54 0 0 DROP tcp -- * * 176.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 55 0 0 DROP tcp -- * * 177.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 56 46 2696 DROP tcp -- * * 178.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 57 0 0 DROP tcp -- * * 179.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 58 4 224 DROP tcp -- * * 180.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 59 0 0 DROP tcp -- * * 181.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 60 0 0 DROP tcp -- * * 182.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 61 34 2040 DROP tcp -- * * 183.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 62 0 0 DROP tcp -- * * 185.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 63 0 0 DROP tcp -- * * 186.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 64 0 0 DROP tcp -- * * 187.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 65 18 912 DROP tcp -- * * 188.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 66 0 0 DROP tcp -- * * 189.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 67 0 0 DROP tcp -- * * 190.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 68 2 120 DROP tcp -- * * 192.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 69 0 0 DROP tcp -- * * 196.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 70 0 0 DROP tcp -- * * 197.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 71 5 300 DROP tcp -- * * 198.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 72 0 0 DROP tcp -- * * 2.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 73 0 0 DROP tcp -- * * 200.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 74 0 0 DROP tcp -- * * 201.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 75 6 360 DROP tcp -- * * 202.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 76 0 0 DROP tcp -- * * 203.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 77 4 160 DROP tcp -- * * 210.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 78 0 0 DROP tcp -- * * 211.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 79 2 96 DROP tcp -- * * 212.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 80 4 240 DROP tcp -- * * 213.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 81 0 0 DROP tcp -- * * 214.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 82 0 0 DROP tcp -- * * 215.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 83 0 0 DROP tcp -- * * 216.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 84 0 0 DROP tcp -- * * 217.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 85 4 172 DROP tcp -- * * 218.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 86 12 576 DROP tcp -- * * 219.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 87 7 372 DROP tcp -- * * 220.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 88 0 0 DROP tcp -- * * 222.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 89 0 0 DROP tcp -- * * 27.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 90 12 608 DROP tcp -- * * 31.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 91 11 528 DROP tcp -- * * 37.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 92 0 0 DROP tcp -- * * 41.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 93 0 0 DROP tcp -- * * 42.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 94 0 0 DROP tcp -- * * 43.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 95 8 480 DROP tcp -- * * 46.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 96 0 0 DROP tcp -- * * 49.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 97 6 360 DROP tcp -- * * 5.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 98 0 0 DROP tcp -- * * 58.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 99 0 0 DROP tcp -- * * 60.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 100 4 160 DROP tcp -- * * 61.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 101 32 1848 DROP tcp -- * * 62.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 102 0 0 DROP tcp -- * * 63.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 103 20 1200 DROP tcp -- * * 64.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 104 0 0 DROP tcp -- * * 65.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 105 266 15960 DROP tcp -- * * 66.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 106 3 180 DROP tcp -- * * 69.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 107 5 272 DROP tcp -- * * 72.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 108 0 0 DROP tcp -- * * 78.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 109 0 0 DROP tcp -- * * 81.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 110 3 180 DROP tcp -- * * 82.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 111 0 0 DROP tcp -- * * 83.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 112 8 384 DROP tcp -- * * 84.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 113 0 0 DROP tcp -- * * 85.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 114 0 0 DROP tcp -- * * 86.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 115 6 360 DROP tcp -- * * 87.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 116 7 408 DROP tcp -- * * 88.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 117 0 0 DROP tcp -- * * 89.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 118 0 0 DROP tcp -- * * 90.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 119 0 0 DROP tcp -- * * 91.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 120 3 152 DROP tcp -- * * 92.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 121 20 992 DROP tcp -- * * 93.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 122 9 512 DROP tcp -- * * 94.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 123 5 272 DROP tcp -- * * 95.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 124 0 0 DROP udp -- * * 1.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 125 0 0 DROP udp -- * * 101.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 126 0 0 DROP udp -- * * 102.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 127 0 0 DROP udp -- * * 103.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 128 0 0 DROP udp -- * * 109.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 129 0 0 DROP udp -- * * 112.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 130 0 0 DROP udp -- * * 113.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 131 0 0 DROP udp -- * * 114.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 132 1 112 DROP udp -- * * 115.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 133 0 0 DROP udp -- * * 116.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 134 0 0 DROP udp -- * * 117.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 135 0 0 DROP udp -- * * 118.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 136 0 0 DROP udp -- * * 119.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 137 0 0 DROP udp -- * * 120.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 138 0 0 DROP udp -- * * 121.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 139 0 0 DROP udp -- * * 122.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 140 0 0 DROP udp -- * * 123.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 141 0 0 DROP udp -- * * 125.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 142 0 0 DROP udp -- * * 134.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 143 0 0 DROP udp -- * * 146.185.0.0/16 0.0.0.0/0 udp dpts:1:50000 144 0 0 DROP udp -- * * 148.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 145 0 0 DROP udp -- * * 151.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 146 0 0 DROP udp -- * * 175.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 147 0 0 DROP udp -- * * 176.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 148 1 70 DROP udp -- * * 177.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 149 0 0 DROP udp -- * * 178.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 150 0 0 DROP udp -- * * 179.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 151 0 0 DROP udp -- * * 180.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 152 0 0 DROP udp -- * * 181.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 153 0 0 DROP udp -- * * 182.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 154 0 0 DROP udp -- * * 183.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 155 0 0 DROP udp -- * * 185.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 156 1 74 DROP udp -- * * 186.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 157 0 0 DROP udp -- * * 187.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 158 0 0 DROP udp -- * * 188.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 159 0 0 DROP udp -- * * 189.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 160 0 0 DROP udp -- * * 190.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 161 0 0 DROP udp -- * * 192.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 162 0 0 DROP udp -- * * 196.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 163 0 0 DROP udp -- * * 197.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 164 0 0 DROP udp -- * * 198.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 165 0 0 DROP udp -- * * 2.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 166 0 0 DROP udp -- * * 200.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 167 0 0 DROP udp -- * * 201.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 168 0 0 DROP udp -- * * 202.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 169 0 0 DROP udp -- * * 203.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 170 0 0 DROP udp -- * * 210.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 171 0 0 DROP udp -- * * 211.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 172 0 0 DROP udp -- * * 212.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 173 0 0 DROP udp -- * * 213.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 174 0 0 DROP udp -- * * 214.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 175 0 0 DROP udp -- * * 215.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 176 0 0 DROP udp -- * * 216.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 177 0 0 DROP udp -- * * 217.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 178 1 80 DROP udp -- * * 218.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 179 0 0 DROP udp -- * * 219.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 180 0 0 DROP udp -- * * 220.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 181 0 0 DROP udp -- * * 222.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 182 0 0 DROP udp -- * * 27.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 183 0 0 DROP udp -- * * 31.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 184 0 0 DROP udp -- * * 37.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 185 0 0 DROP udp -- * * 41.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 186 0 0 DROP udp -- * * 42.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 187 0 0 DROP udp -- * * 43.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 188 0 0 DROP udp -- * * 46.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 189 0 0 DROP udp -- * * 49.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 190 0 0 DROP udp -- * * 5.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 191 0 0 DROP udp -- * * 58.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 192 0 0 DROP udp -- * * 60.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 193 0 0 DROP udp -- * * 61.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 194 0 0 DROP udp -- * * 62.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 195 0 0 DROP udp -- * * 63.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 196 0 0 DROP udp -- * * 64.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 197 0 0 DROP udp -- * * 65.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 198 0 0 DROP udp -- * * 66.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 199 0 0 DROP udp -- * * 69.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 200 0 0 DROP udp -- * * 72.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 201 0 0 DROP udp -- * * 78.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 202 0 0 DROP udp -- * * 81.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 203 0 0 DROP udp -- * * 82.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 204 0 0 DROP udp -- * * 83.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 205 0 0 DROP udp -- * * 84.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 206 0 0 DROP udp -- * * 85.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 207 0 0 DROP udp -- * * 86.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 208 0 0 DROP udp -- * * 87.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 209 0 0 DROP udp -- * * 88.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 210 0 0 DROP udp -- * * 89.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 211 0 0 DROP udp -- * * 90.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 212 0 0 DROP udp -- * * 91.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 213 0 0 DROP udp -- * * 92.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 214 2 72 DROP udp -- * * 93.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 215 0 0 DROP udp -- * * 94.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 216 0 0 DROP udp -- * * 95.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 217 0 0 DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:12443 218 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:11443 219 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:11444 220 23 1104 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:8447 221 24 1152 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:8443 222 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:8880 223 207 11096 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 224 19 996 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 225 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 226 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 227 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:587 228 4 216 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 229 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:465 230 14 840 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 231 2 120 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:995 232 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 233 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:993 234 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:106 235 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 236 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:5432 237 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:9008 238 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:9080 239 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:137 240 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:138 241 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 242 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 243 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 244 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 245 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 246 73 4488 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 247 77 23598 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW reject-with tcp-reset 3 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 4 0 0 ACCEPT all -- lo lo 0.0.0.0/0 0.0.0.0/0 5 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 31004 25M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 1 333 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW reject-with tcp-reset 3 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 4 434 25606 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 5 328 21324 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0

    Read the article

  • git post-receive hook throws "command not found" error but seems to run properly and no errors when run manually

    - by Ben
    I have a post-receive hook that runs on a central git repository set up with gitolite to trigger a git pull on a staging server. It seems to work properly, but throws a "command not found" error when it is run. I am trying to track down the source of the error, but have not had any luck. Running the same commands manually does not produce an error. The error changes depending on what was done in the commit that is being pushed to the central repository. For instance, if 'git rm ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Removed: command not found" and if 'git add ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Merge: command not found". In either case the 'git pull' run on the staging server works correctly despite the error message. Here is the post-receive script: #!/bin/bash # # This script is triggered by a push to the local git repository. It will # ssh into a remote server and perform a git pull. # # The SSH_USER must be able to log into the remote server with a # passphrase-less SSH key *AND* be able to do a git pull without a passphrase. # # The command to actually perform the pull request on the remost server comes # from the ~/.ssh/authorized_keys file on the REMOTE_HOST and is triggered # by the ssh login. SSH_USER="remoteuser" REMOTE_HOST="staging.server.com" `ssh $SSH_USER@$REMOTE_HOST` # This is line 16 echo "Done!" The command that does the git pull on the staging server is in the ssh user's ~/.ssh/authorized_keys file and is: command="cd /var/www/staging_site; git pull",no-port-forwarding,no-X11-forwarding,no-agent-forwarding, ssh-rsa AAAAB3NzaC1yc2EAAAABIwAA... (the rest of the public key) This is the actual output from removing a file from my local repo, committing it locally, and pushing it to the central git repo: ben@tamarack:~/thejibe/testing/web$ git rm ./testing rm 'testing' ben@tamarack:~/thejibe/testing/web$ git commit -a -m "Remove testing file" [master bb96e13] Remove testing file 1 files changed, 0 insertions(+), 5 deletions(-) delete mode 100644 testing ben@tamarack:~/thejibe/testing/web$ git push Counting objects: 3, done. Delta compression using up to 2 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (2/2), 221 bytes, done. Total 2 (delta 1), reused 0 (delta 0) remote: From [email protected]:testing remote: aa72ad9..bb96e13 master -> origin/master remote: hooks/post-receive: line 16: Removed: command not found # The error msg remote: Done! To [email protected]:testing aa72ad9..bb96e13 master -> master ben@tamarack:~/thejibe/testing/web$ As you can see the post-receive script gets to the echo "Done!" line and when I look on the staging server the git pull has been successfully run, but there's still that nagging error message. Any suggestions on where to look for the source of the error message would be greatly appreciated. I'm tempted to redirect stderr to /dev/null but would prefer to know what the problem is.

    Read the article

  • How to tell if a freebsd jail is up to date?

    - by Martin Torhage
    I've set up a "Service Jail" in FreeBSD 8.0 according to the FreeBSD Handbook (http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/jails-application.html). After upgrading the host to the latest patch level and then performed a jail-upgrade, freebsd-fetch still reports that there are files in need of an update in the jail. Is this expected? Then how do I know if a jail is up to date? This is what I've done in more detail: After the initial setup of the jail freebsd-update fetch reported that there were no updates available neither in the host system nor in the jail. This was expected. A while later freebsd-update fetch reported that the following files where in need of an update both in the host and in the jail. /usr/lib/libssl.a /usr/lib/libssl_p.a /usr/lib/libzpool.a /usr/lib32/libssl.a /usr/lib32/libssl_p.a /usr/lib32/libzpool.a I updated the host and followed the upgrade guide for the jail (http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/jails-application.html#JAILS-SERVICE-JAILS-UPGRADING). freebsd-update fetch now reports that there are no updates available in the host but the following is the output from freebsd-update fetch in the jail: [root@bb /]# freebsd-update fetch Looking up update.FreeBSD.org mirrors... 3 mirrors found. Fetching metadata signature for 8.0-RELEASE from update5.FreeBSD.org... done. Fetching metadata index... done. Inspecting system... done. Preparing to download files... done. The following files are affected by updates, but no changes have been downloaded because the files have been modified locally: /var/db/mergemaster.mtree The following files will be updated as part of updating to 8.0-RELEASE-p2: /usr/lib/libssl.a /usr/lib/libssl_p.a /usr/lib/libzpool.a /usr/lib32/libssl.a /usr/lib32/libssl_p.a /usr/lib32/libzpool.a Shouldn't freebsd-update know that the jail is up to date or have I failed upgrading it? How am I supposed to know if a jail is up to date if freebsd-update can't tell? I'm sure I ran make cleandir twice before make buildworld. TIA

    Read the article

  • Mono through FastCGI on nginx

    - by Stijn
    I'm going through http://www.mono-project.com/FastCGI_Nginx and can't get it to work. The FastCGI server seems to be running. The following is from the error log: upstream sent unexpected FastCGI record: 3 while reading response header from upstream, client: 192.168.1.125, server: arch, request: "GET /Default.aspx HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "arch" Command used to start the server (I've tried server2 and server4, using a simple .NET 2.0 or .NET 4.0 project): fastcgi-mono-server2 /applications=arch:/:/var/www/test/public/ /socket=tcp:127.0.0.1:9000 /stopable=True nginx config: server { listen 80; server_name arch; access_log /var/www/test/log/access.log; error_log /var/www/test/log/error.log; location / { root /var/www/test/public; index index.html index.htm default.aspx Default.aspx; fastcgi_index Default.aspx; fastcgi_pass 127.0.0.1:9000; fastcgi_param PATH_INFO ""; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } } Using xsp4 works fine, I can browse the site. I've enabled FastCGI logging, this is the output: [2012-04-15 23:51:18Z] Debug Accepting an incoming connection. [2012-04-15 23:51:18Z] Notice Beginning to receive records on connection. [2012-04-15 23:51:18Z] Debug Record received. (Type: BeginRequest, ID: 1, Length: 8) [2012-04-15 23:51:18Z] Debug Record received. (Type: Params, ID: 1, Length: 386) [2012-04-15 23:51:18Z] Debug Record received. (Type: Params, ID: 1, Length: 0) [2012-04-15 23:51:18Z] Debug Read parameter. (PATH_INFO = ) [2012-04-15 23:51:18Z] Debug Read parameter. (SCRIPT_FILENAME = /var/www/test/public/Home) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_HOST = arch) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_USER_AGENT = Mozilla/5.0 (Windows NT 6.1; WOW64; rv:11.0) Gecko/20100101 Firefox/11.0) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_ACCEPT = text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_ACCEPT_LANGUAGE = en-gb,en;q=0.5) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_ACCEPT_ENCODING = gzip, deflate) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_CONNECTION = keep-alive) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_COOKIE = ASP.NET_SessionId=2C3D702C9B0F23F69B80820B) [2012-04-15 23:51:18Z] Error Failed to process connection. Reason: Argument cannot be null. Parameter name: s [2012-04-15 23:51:18Z] Debug Record sent. (Type: EndRequest, ID: 1, Length: 8) [2012-04-15 23:51:18Z] Debug The FastCGI connection has been closed.

    Read the article

  • git post-receive hook throws "command not found" error but seems to run properly and no errors when run manually

    - by Ben
    I have a post-receive hook that runs on a central git repository set up with gitolite to trigger a git pull on a staging server. It seems to work properly, but throws a "command not found" error when it is run. I am trying to track down the source of the error, but have not had any luck. Running the same commands manually does not produce an error. The error changes depending on what was done in the commit that is being pushed to the central repository. For instance, if 'git rm ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Removed: command not found" and if 'git add ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Merge: command not found". In either case the 'git pull' run on the staging server works correctly despite the error message. Here is the post-receive script: #!/bin/bash # # This script is triggered by a push to the local git repository. It will # ssh into a remote server and perform a git pull. # # The SSH_USER must be able to log into the remote server with a # passphrase-less SSH key *AND* be able to do a git pull without a passphrase. # # The command to actually perform the pull request on the remost server comes # from the ~/.ssh/authorized_keys file on the REMOTE_HOST and is triggered # by the ssh login. SSH_USER="remoteuser" REMOTE_HOST="staging.server.com" `ssh $SSH_USER@$REMOTE_HOST` # This is line 16 echo "Done!" The command that does the git pull on the staging server is in the ssh user's ~/.ssh/authorized_keys file and is: command="cd /var/www/staging_site; git pull",no-port-forwarding,no-X11-forwarding,no-agent-forwarding, ssh-rsa AAAAB3NzaC1yc2EAAAABIwAA... (the rest of the public key) This is the actual output from removing a file from my local repo, committing it locally, and pushing it to the central git repo: ben@tamarack:~/thejibe/testing/web$ git rm ./testing rm 'testing' ben@tamarack:~/thejibe/testing/web$ git commit -a -m "Remove testing file" [master bb96e13] Remove testing file 1 files changed, 0 insertions(+), 5 deletions(-) delete mode 100644 testing ben@tamarack:~/thejibe/testing/web$ git push Counting objects: 3, done. Delta compression using up to 2 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (2/2), 221 bytes, done. Total 2 (delta 1), reused 0 (delta 0) remote: From [email protected]:testing remote: aa72ad9..bb96e13 master -> origin/master remote: hooks/post-receive: line 16: Removed: command not found # The error msg remote: Done! To [email protected]:testing aa72ad9..bb96e13 master -> master ben@tamarack:~/thejibe/testing/web$ As you can see the post-receive script gets to the echo "Done!" line and when I look on the staging server the git pull has been successfully run, but there's still that nagging error message. Any suggestions on where to look for the source of the error message would be greatly appreciated. I'm tempted to redirect stderr to /dev/null but would prefer to know what the problem is.

    Read the article

  • Linux boot on a raid1 software raid ?

    - by azera
    Hello I am trying to convert my single disk boot to a raid1 boot So far here is what i have: I sucessfully create the raid 1 as degraded with the new drive alone, I copied all the data on it I can mount that raid 1, see its files etc I already have a raid5 that is working on the same box (although not booting on it) I have installed grub on both drive When grub boot, it loads the kernel alright, but during the kernel boot it fails to load the "root block device" The kernel tells me : 1 - detected that root device is an md device 2 - determining root devices 3 - mounting root 4 - mounting /dev/md125 on /newroot failed: input/output error. Please enter another root device: ... At this point, if I enter /dev/sda3 (my "old" root device that isn't converted to raid yet) everything boots fine without the root. The /dev/md125 device is indeed created but it seems to be created after the error happens, as in it creates it after loading the device, when mdadm is loaded. Somehow it looks like it can't/doesn't load the raid array before it needs to mount it, and I don't know how I can solve that. My config files (taken from the system once it boots with sda3 as root device): $ cat /etc/mdadm.conf ARRAY /dev/md/md0-r5 metadata=0.90 UUID=1a118934:c831bdb3:64188b84:66721085 ARRAY /dev/md125 metadata=0.90 UUID=48ec4190:a80d4dde:64188b84:66721085 $ cat /proc/mdstat Personalities : [raid1] [raid6] [raid5] [raid4] [raid0] [raid10] md125 : active raid1 sdc3[1] 477853312 blocks [2/1] [_U] md127 : active raid5 sdd[0] sdf[3] sdb[2] sde[1] 4395415488 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] unused devices: <none> $ cat /boot/grub/menu.lst default 0 timeout 8 splashimage=(hd0,0)/boot/grub/splash.xpm.gz title Gentoo Linux 2.6.31-r10 root (hd0,0) #kernel /boot/kernel-genkernel-x86_64-2.6.31-gentoo-r10 root=/dev/ram0 real_root=/dev/sda3 kernel /boot/kernel-genkernel-x86_64-2.6.31-gentoo-r10 root=/dev/md125 md=125,/dev/sdc3,/dev/sda3 initrd /boot/initramfs-genkernel-x86_64-2.6.31-gentoo-r10 # blkid /dev/sda1: UUID="89fee223-b845-4e0a-8a0b-e6cf695d5bcf" TYPE="ext2" /dev/sda2: UUID="a72296a8-d7d4-447f-a34b-ee920fd1a767" TYPE="swap" /dev/sda3: UUID="97eb0a6a-c385-4a9d-bf74-c0bab1fa4dc1" TYPE="ext3" /dev/sdb: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdc1: UUID="d36537fd-19a0-b8a3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdd: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sde: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/md127: UUID="13a41589-4cf1-4c04-91ca-37484182c783" TYPE="ext4" /dev/sdf: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdc2: UUID="a1916397-1b48-45d7-9f98-73aa521e882f" TYPE="swap" /dev/sdc3: UUID="48ec4190-a80d-4dde-6418-8b8466721085" TYPE="linux_raid_member" /dev/md125: UUID="c947ed64-1d4d-4d1d-b4d2-24669fff916e" SEC_TYPE="ext2" TYPE="ext3" # mdadm -E mdadm: No devices to examine # fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe975e9fc Device Boot Start End Blocks Id System /dev/sda1 1 5 40131 83 Linux /dev/sda2 6 1311 10490445 82 Linux swap / Solaris /dev/sda3 1312 60801 477853425 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe975e9fc Device Boot Start End Blocks Id System /dev/sdc1 1 5 40131 83 Linux /dev/sdc2 6 1311 10490445 82 Linux swap / Solaris /dev/sdc3 1312 60801 477853425 83 Linux Disk /dev/md125: 489.3 GB, 489321791488 bytes 2 heads, 4 sectors/track, 119463328 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk identifier: 0x00000000 Disk /dev/md125 doesn't contain a valid partition table

    Read the article

  • Trouble connecting a Ubuntu system to IPv6 tunnel over NAT

    - by John Millikin
    I'm trying to set up an IPv6 tunnel, via Hurricane Electric's tunnel-broker service. I've configured my system using their example commands: # $ipv4a = tunnel server's IPv4 IP # $ipv4b = user's IPv4 IP # $ipv6a = tunnel server's side of point-to-point /64 allocation # $ipv6b = user's side of point-to-point /64 allocation ip tunnel add he-ipv6 mode sit remote $ipv4a local $ipv4b ttl 255 ip link set he-ipv6 up ip addr add $ipv6b dev he-ipv6 ip route add ::/0 dev he-ipv6 And have configured my desktop to be in my NAT router's DMZ. The router is running Tomato firmware. But I can't ping any IPv6 services: $ ping6 -I he-ipv6 '2001:470:1f04:454::1' PING 2001:470:1f04:454::1(2001:470:1f04:454::1) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes From 2001:470:1f04:454::2 icmp_seq=1 Destination unreachable: Address unreachable From 2001:470:1f04:454::2 icmp_seq=2 Destination unreachable: Address unreachable I can ping my local address: $ ping6 -I he-ipv6 '2001:470:1f04:454::2' PING 2001:470:1f04:454::2(2001:470:1f04:454::2) from 2001:470:1f04:454::2 he-ipv6: 56 data bytes 64 bytes from 2001:470:1f04:454::2: icmp_seq=1 ttl=64 time=0.037 ms 64 bytes from 2001:470:1f04:454::2: icmp_seq=2 ttl=64 time=0.039 ms I don't know much about routing, but results I found online suggested the output of ip -6 route and ip addr could be useful: $ ip -6 route 2001:470:1f04:454::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 fe80::/64 dev virbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 via :: dev he-ipv6 proto kernel metric 256 mtu 1480 advmss 1420 hoplimit 4294967295 default dev he-ipv6 metric 1024 mtu 1480 advmss 1420 hoplimit 4294967295 $ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100 link/ether 00:1c:c0:a1:98:b2 brd ff:ff:ff:ff:ff:ff inet 192.168.1.10/24 brd 192.168.1.255 scope global eth1 inet6 fe80::21c:c0ff:fea1:98b2/64 scope link valid_lft forever preferred_lft forever 3: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 36:4c:33:ab:0d:c6 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 inet6 fe80::344c:33ff:feab:dc6/64 scope link valid_lft forever preferred_lft forever 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:76:62:6e:65:74 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 7e:29:5e:7c:ba:93 brd ff:ff:ff:ff:ff:ff 6: sit0: <NOARP> mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0 7: he-ipv6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN link/sit 24.130.225.239 peer 72.52.104.74 inet6 2001:470:1f04:454::2/64 scope global valid_lft forever preferred_lft forever inet6 fe80::1882:e1ef/128 scope link valid_lft forever preferred_lft forever

    Read the article

  • Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

    - by Srekel
    I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either.

    Read the article

  • VPN IP Routing - slow connections

    - by dannymcc
    UPDATE: Router error logs show: LCP Time-out 0 I'm not sure how to correct this. The Lan-to-Lan profiles are set to -1 Idle Timeout (for the remote branch). I have a PPTP VPN running between two Draytek 2820 routers. They are setup that one dials out to the other one. Main Practice - 192.168.1.0/24 Branch - 192.168.3.0/24 I have then set (on the Branch) router the following route: 192.168.1.0/24 If I then request a server running on 192.168.1.1 from the Branch, it correctly routes through VPN tunnel. If I request the branch server at 192.168.3.1 it correctly routes to the local server without using the VPN tunnel. I have temporarily disabled the firewall on both routers, and made sure that QoS is disabled. The Main Practice internet connection is ~30mb down / ~10mb up, and the Branch connection is ~5mb down / ~2mb up. Anything over the VPN tunnel runs pretty slowly (VNC, Remote Desktop and Terminal Emulators). However, if I dial using the Windows VPN wizard, creating a connection from the laptop to the Main Practice - everything runs quickly. I'm looking for possible causes, and/or ways of further diagnosing the issue. Any help would be greatly appreciated! UPDATE: In summary, when I connect within the Branch and try and access a host that's within the Main Practice it works, but slowly. If I then dial the VPN on my Windows 7 laptop whilst still connected to the Branch network, it's fast. Main Practice Branch Practice Routing Table from Branch Router Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 126.256.126.103 WAN2 C~ 192.168.1.99/ 255.255.255.255 directly connected VPN-1 S~ 192.168.1.0/ 255.255.255.0 via 192.168.1.99 VPN-1 S~ 192.168.2.0/ 255.255.255.0 via 192.168.1.99 VPN-1 C~ 192.168.3.0/ 255.255.255.0 directly connected LAN2 C 126.256.126.103/ 255.255.255.224 directly connected WAN2 Routing Table from Main Practice Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 81.139.64.1, WAN2 S 81.137.176.1/ 255.255.255.255 via 81.137.176.1, WAN2 * 81.139.64.1/ 255.255.255.255 via 81.139.64.1, WAN2 C~ 192.168.1.204/ 255.255.255.255 is directly connected, VPN C~ 192.168.1.0/ 255.255.255.0 is directly connected, LAN S~ 192.168.2.0/ 255.255.255.0 via 192.168.1.204, VPN S~ 192.168.3.0/ 255.255.255.0 via 192.168.1.203, VPN Connection Details (from Branch Router) Connection Details (from Main Practice Router) IPERF.exe Output

    Read the article

  • Installing drivers for switchable graphics

    - by Anonymous
    I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

    Read the article

  • High CPU from httpd process

    - by KHWeb
    I am currently getting high CPU on a server that is just running a couple of sites with very low traffic. One of the sites is in still development going live soon. However, this site is very very slow...When browsing through its pages I can see that the CPU goes from 30% to 100% for httpd (see top output below). I have tuned httpd & MySQL, Apache Solr, Tomcat for high performance, and I am using APC. Not sure what to do from here or how to find the culprit as I have a bunch of messages on the httpd log and have been chasing dead ends for some time...any help is greatly appreciated. Server: AuthenticAMD, Quad-Core AMD Opteron(tm) Processor 2352, RAM 16GB Linux 2.6.27 64-bit, Centos 5.5 Plesk 9.5.4, MySQL 5.1.48, PHP 5.2.17 Apache/2.2.3 (CentOS) DAV/2 mod_jk/1.2.15 mod_ssl/2.2.3 OpenSSL/0.9.8e-fips-rhel5 PHP/5.2.17 mod_perl/2.0.4 Perl/v5.8.8 Tomcat6-6.0.29-1.jpp5, Tomcat-native-1.1.20-1.el5, Apache Solr top 17595 apache 20 0 1825m 507m 10m R 100.4 3.2 0:17.50 httpd 17596 apache 20 0 1565m 247m 9936 R 83.1 1.5 0:10.86 httpd 17598 apache 20 0 1430m 110m 6472 S 54.5 0.7 0:08.66 httpd 17599 apache 20 0 1438m 124m 12m S 37.2 0.8 0:11.20 httpd 16197 mysql 20 0 13.0g 2.0g 5440 S 9.6 12.6 297:12.79 mysqld 17617 root 20 0 12748 1172 812 R 0.7 0.0 0:00.88 top 8169 tomcat 20 0 4613m 268m 6056 S 0.3 1.7 6:40.56 java httpd error_log [debug] prefork.c(991): AcceptMutex: sysvsem (default: sysvsem) [info] mod_fcgid: Process manager 17593 started [debug] proxy_util.c(1854): proxy: grabbed scoreboard slot 0 in child 17594 for worker proxy:reverse [debug] proxy_util.c(1967): proxy: initialized single connection worker 0 in child 17594 for (*) [debug] proxy_util.c(1854): proxy: grabbed scoreboard slot 0 in child 17595 for worker proxy:reverse [debug] proxy_util.c(1873): proxy: worker proxy:reverse already initialized [notice] child pid 22782 exit signal Segmentation fault (11) [error] (43)Identifier removed: apr_global_mutex_lock(jk_log_lock) failed [debug] util_ldap.c(2021): LDAP merging Shared Cache conf: shm=0x7fd29a5478c0 rmm=0x7fd29a547918 for VHOST: example.com [info] APR LDAP: Built with OpenLDAP LDAP SDK [info] LDAP: SSL support available [info] Init: Seeding PRNG with 256 bytes of entropy [info] Init: Generating temporary RSA private keys (512/1024 bits) [info] Init: Generating temporary DH parameters (512/1024 bits) [debug] ssl_scache_shmcb.c(374): shmcb_init allocated 512000 bytes of shared memory [debug] ssl_scache_shmcb.c(554): entered shmcb_init_memory() [debug] ssl_scache_shmcb.c(576): for 512000 bytes, recommending 4265 indexes [debug] ssl_scache_shmcb.c(619): shmcb_init_memory choices follow [debug] ssl_scache_shmcb.c(621): division_mask = 0x1F [debug] ssl_scache_shmcb.c(623): division_offset = 96 [debug] ssl_scache_shmcb.c(625): division_size = 15997 [debug] ssl_scache_shmcb.c(627): queue_size = 2136 [debug] ssl_scache_shmcb.c(629): index_num = 133 [debug] ssl_scache_shmcb.c(631): index_offset = 8 [debug] ssl_scache_shmcb.c(633): index_size = 16 [debug] ssl_scache_shmcb.c(635): cache_data_offset = 8 [debug] ssl_scache_shmcb.c(637): cache_data_size = 13853 [debug] ssl_scache_shmcb.c(650): leaving shmcb_init_memory()

    Read the article

  • Import/rip/convert DVD to Adobe Premiere Pro for Mac

    - by alexyu2010
    For those who want to edit their videos, Adobe Premiere Pro will inevitably a good choice, it is a professional, real time, timeline based video editing software application that supports many video editing cards and plug-ins for accelerated processing, additional file format support and video/audio effects. Although Adobe Premiere Pro is said to be for professionals, is not so complicated that a hobbyist can't excel at using it in an hour or so. General file formats supported by Adobe Premiere Pro Up to now, Adobe Creative Suite has released several versions of Adobe Premiere Pro, including Adobe Premiere 1.0, Adobe Premiere 2.0, Adobe Premiere Pro CS3, Adobe Premiere Pro CS4 and the newly published Adobe Premiere Pro CS5. Although I saw diversity in file formats they support, I did find some common file formats supported by all of them, such as AVI, MOV, MPG. Importing DVD, Adobe Premiere Pro says "NO" It is obvious to all of us that Adobe Premiere Pro will never give DVD a hug, and it isn't rare to see that many people are really confused when they want to import their DVDs to Adobe Premiere Pro for editing. What to do? Yes, you may have noticed that, there is only a way out, that is ripping your DVDs to some formats workable with Adobe Premiere Pro natively, and this is what DVD to Adobe Premiere Pro can do. Importing DVD to Adobe Premiere Pro on Mac DVD to Adobe Premiere Pro converter for Mac is the specially designed application for ripping/converting DVD movies, DVD VOB files or DVD clips to Adobe Premiere Pro compatible AVI, MOV, MPG files with either DVD ripping tool and video converting tool within the versatile DVD to Adobe Premiere Pro converter who is a powerful program for dealing with DVD and videos perfectly. Mac DVD to Adobe Premiere Pro converter can work with a wide variety of files including DVD, VOB, AVI, WMV, MPG, MOV, MP4, DV, FLV, MKV, ASF, SWF, HD video for using with other editing tools like iMovie, FCP etc, play on QuickTime, iTunes, put on portable devices like iPod, iPhone, iPad, iRiver, BlackBerry, Gphone, Mobile Phone or upload to webistes such as YouTube, MySpace. DVD to Adobe Premiere Pro converter for Mac can also help you do some basic editing. You can trim, crop your DVD movie or DVD clip, apply special effect to make it more artistic, merge several DVD clips to a single one or tweak the output parameters for video and audio separately to get a better quality rendering. Besides, to get a good common of the process the preview widnows is also available for you.

    Read the article

  • Apache taking up too much CPU

    - by andrewtweber
    I'm trying to manage a server on Amazon for a network of sites that receives about 100 million pageviews per month. Unfortunately, nobody out of my team of 5 developers has much server admin experience. Right now we have the MaxClients set to 1400. Currently our traffic is about average, and we have 1150 total Apache processes running, which use about 2% CPU each! Out of those 1150, 800 of them are currently sleeping, but still taking up CPU. I'm sure there are ways to optimize this. I have a few thoughts: It appears Apache is creating a new process for every single connection. Is this normal? Is there a way to more quickly kill the sleeping processes? Should we turn KeepAlive on? Each page loads about 15-20 medium-sized graphics and a lot of javascript/css. So, here's our Apache setup. We do plan on contracting a server admin asap, but I would really appreciate some advice until we can find someone. Timeout 25 KeepAlive Off MaxKeepAliveRequests 200 KeepAliveTimeout 5 <IfModule prefork.c> StartServers 100 MinSpareServers 20 MaxSpareServers 50 ServerLimit 1400 MaxClients 1400 MaxRequestsPerChild 5000 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 400 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Full top output: top - 23:44:36 up 1 day, 6:43, 4 users, load average: 379.14, 379.17, 377.22 Tasks: 1153 total, 379 running, 774 sleeping, 0 stopped, 0 zombie Cpu(s): 71.9%us, 26.2%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 1.9%si, 0.0%st Mem: 70343000k total, 23768448k used, 46574552k free, 527376k buffers Swap: 0k total, 0k used, 0k free, 10054596k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1756 mysql 20 0 10.2g 1.8g 5256 S 19.8 2.7 904:41.13 mysqld 21515 apache 20 0 396m 18m 4512 R 2.1 0.0 0:34.42 httpd 21524 apache 20 0 396m 18m 4032 R 2.1 0.0 0:32.63 httpd 21544 apache 20 0 394m 16m 4084 R 2.1 0.0 0:36.38 httpd 21643 apache 20 0 396m 18m 4360 R 2.1 0.0 0:34.20 httpd 21817 apache 20 0 396m 17m 4064 R 2.1 0.0 0:38.22 httpd 22134 apache 20 0 395m 17m 4584 R 2.1 0.0 0:35.62 httpd 22211 apache 20 0 397m 18m 4104 R 2.1 0.0 0:29.91 httpd 22267 apache 20 0 396m 18m 4636 R 2.1 0.0 0:35.29 httpd 22334 apache 20 0 397m 18m 4096 R 2.1 0.0 0:34.86 httpd 22549 apache 20 0 395m 17m 4056 R 2.1 0.0 0:31.01 httpd 22612 apache 20 0 397m 19m 4152 R 2.1 0.0 0:34.34 httpd 22721 apache 20 0 396m 18m 4060 R 2.1 0.0 0:32.76 httpd 22932 apache 20 0 396m 17m 4020 R 2.1 0.0 0:37.34 httpd 22933 apache 20 0 396m 18m 4060 R 2.1 0.0 0:34.77 httpd 22949 apache 20 0 396m 18m 4060 R 2.1 0.0 0:34.61 httpd 22956 apache 20 0 402m 24m 4072 R 2.1 0.0 0:41.45 httpd

    Read the article

  • Graphics driver for ubuntu on dell latitude XT

    - by marc.riera
    Hi, we have a laptop (dell latitude xt) on our company, and we would like to install ubuntu on it. windows 7 works fine out of the box, so the hardware is fine. since this laptop has a touchscreen we just installed ubuntu 10.10 netbook edition 32x. But, we do not manage to enable the touchscreen, neither the vga graphic drivers. this is the output from lspci, if somebody cares. 00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 7930 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS7932 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc Device 7934 00:06.0 PCI bridge: ATI Technologies Inc RS7936 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc Device 7937 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Xpress 1250 03:01.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 03:01.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 03:01.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5756ME Gigabit Ethernet PCI Express 0b:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03) I've tryied to install ati drivers 9.3 , which I downloaded and installed, unpacked and installed, builded and installed, but nothing worked. Looks like the latests version is just accepted to work on jaunty 9.04, so they are kind of old. what else I can do? thanks. Marc Information added: lsusb and lspci -n |grep 01:05.0 sysop@wl083517:~$ lspci -n |grep 01:05.0 01:05.0 0300: 1002:7942 sysop@wl083517:~$ lsusb Bus 006 Device 002: ID 413c:8138 Dell Computer Corp. Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard EAP-SIM Port Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 413c:8140 Dell Computer Corp. Wireless 360 Bluetooth Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 1b96:0001 N-Trig Duosense Transparent Electromagnetic Digitizer Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 03f0:1807 Hewlett-Packard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub sysop@wl083517:~$

    Read the article

  • MariaDB doesn't upgrade, 2 versions are installed

    - by zahorak
    I have a server running on Debian wheezy with MaraiDB and OwnCloud. Few days ago, I wanted to update the packages because of the OwnCloud updates but something went wrong. Usually in this case I'd probably try to remove and again install the problematic packages, but on a server which is used by different people it doesn't seem like a valid solution anymore. Here you can see my console output: user@server:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libmariadbclient18 : Depends: libmysqlclient18 (= 10.0.4+maria-1~wheezy) but 10.0.5+maria-1~wheezy is installed libmysqlclient18 : Depends: libmariadbclient18 (= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-client-10.0 : Depends: libmariadbclient18 (>= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-client-core-10.0 : Depends: libmariadbclient18 (>= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-server : Depends: mariadb-server-10.0 (= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed mariadb-server-core-10.0 : Depends: libmariadbclient18 (>= 10.0.5+maria-1~wheezy) but 10.0.4+maria-1~wheezy is installed E: Unmet dependencies. Try using -f. user@server:~$ sudo apt-get upgrade -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages will be upgraded: libmariadbclient18 mariadb-server-10.0 owncloud 3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 7 not fully installed or removed. Need to get 0 B/37.2 MB of archives. After this operation, 3,565 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Preconfiguring packages ... (Reading database ... 35901 files and directories currently installed.) Preparing to replace libmariadbclient18 10.0.4+maria-1~wheezy (using .../libmariadbclient18_10.0.5+maria-1~wheezy_amd64.deb) ... Unpacking replacement libmariadbclient18 ... dpkg: error processing /var/cache/apt/archives/libmariadbclient18_10.0.5+maria-1~wheezy_amd64.deb (--unpack): trying to overwrite '/usr/lib/mysql/plugin/dialog.so', which is also in package mariadb-server-10.0 10.0.4+maria-1~wheezy Errors were encountered while processing: /var/cache/apt/archives/libmariadbclient18_10.0.5+maria-1~wheezy_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I tried removing the 10.0.4 package version of libmariadbclient18 but I wasn't really successful in doing that. So my last hope is here, do you have any ideas how exactly I could fix this issue? Thx very much

    Read the article

  • vagrant up command very slow on OS X Lion

    - by Andy Hume
    When I run vagrant up to provision a new VM on Lion it takes an extremely long time, during which the entire Mac is very laggy and unresponsive. The output is as follows, the key point being the "notice: Finished catalog run in 754.28 seconds" > vagrant up [default] Importing base box 'lucid64'... [default] The guest additions on this VM do not match the install version of VirtualBox! This may cause things such as forwarded ports, shared folders, and more to not work properly. If any of those things fail on this machine, please update the guest additions and repackage the box. Guest Additions Version: 4.1.0 VirtualBox Version: 4.1.6 [default] Matching MAC address for NAT networking... [default] Clearing any previously set forwarded ports... [default] Forwarding ports... [default] -- ssh: 22 => 2222 (adapter 1) [default] -- web: 80 => 4567 (adapter 1) [default] Creating shared folders metadata... [default] Running any VM customizations... [default] Booting VM... [default] Waiting for VM to boot. This can take a few minutes. [default] VM booted and ready for use! [default] Mounting shared folders... [default] -- v-root: /vagrant [default] -- v-data: /var/www [default] -- manifests: /tmp/vagrant-puppet/manifests [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: /Stage[main]/Lucid64/Package[apache2]/ensure: ensure changed 'purged' to 'present' [default] [default] notice: /Stage[main]/Lucid64/File[/etc/motd]/ensure: defined content as '{md5}a25e31ba9b8489da9cd5751c447a1741' [default] [default] notice: Finished catalog run in 754.28 seconds [default] [default] err: /File[/var/lib/puppet/rrd]/ensure: change from absent to directory failed: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: change from absent to directory failed: Could not find group puppet [default] [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: Finished catalog run in 2.05 seconds [default] [default] err: /File[/var/lib/puppet/rrd]: Could not evaluate: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: Could not evaluate: Could not find group puppet [default] [default] Running provisioner: Vagrant::Provisioners::Puppet... [default] Running Puppet with lucid64.pp... [default] stdin: is not a tty [default] notice: /Stage[main]/Lucid64/Exec[apt-update]/returns: executed successfully [default] [default] notice: Finished catalog run in 1.36 seconds [default] [default] err: /File[/var/lib/puppet/rrd]: Could not evaluate: Could not find group puppet [default] [default] err: Could not send report: Got 1 failure(s) while initializing: Could not evaluate: Could not find group puppet [default] >

    Read the article

  • freebsd-update reports an upgraded jail as not upgraded

    - by Martin Torhage
    I've set up a "Service Jail" in FreeBSD 8.0 according to the FreeBSD Handbook (http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/jails-application.html). After upgrading the host to the latest patch level and then performed a jail-upgrade, freebsd-fetch still reports that there are files in need of an update in the jail. Is this expected? Then how do I know if a jail is up to date? This is what I've done in more detail: After the initial setup of the jail freebsd-update fetch reported that there were no updates available neither in the host system nor in the jail. This was expected. A while later freebsd-update fetch reported that the following files where in need of an update both in the host and in the jail. /usr/lib/libssl.a /usr/lib/libssl_p.a /usr/lib/libzpool.a /usr/lib32/libssl.a /usr/lib32/libssl_p.a /usr/lib32/libzpool.a I updated the host and followed the upgrade guide for the jail (http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/jails-application.html#JAILS-SERVICE-JAILS-UPGRADING). freebsd-update fetch now reports that there are no updates available in the host but the following is the output from freebsd-update fetch in the jail: [root@bb /]# freebsd-update fetch Looking up update.FreeBSD.org mirrors... 3 mirrors found. Fetching metadata signature for 8.0-RELEASE from update5.FreeBSD.org... done. Fetching metadata index... done. Inspecting system... done. Preparing to download files... done. The following files are affected by updates, but no changes have been downloaded because the files have been modified locally: /var/db/mergemaster.mtree The following files will be updated as part of updating to 8.0-RELEASE-p2: /usr/lib/libssl.a /usr/lib/libssl_p.a /usr/lib/libzpool.a /usr/lib32/libssl.a /usr/lib32/libssl_p.a /usr/lib32/libzpool.a Shouldn't freebsd-update know that the jail is up to date or have I failed upgrading it? How am I supposed to know if a jail is up to date if freebsd-update can't tell? I'm sure I ran make cleandir twice before make buildworld. TIA

    Read the article

  • VirtualBox guest responds to ping but all ports closed in nmap

    - by jeremyjjbrown
    I want to setup a test database on a vm for development purposes but I cannot connect to the server via the network. I've got Ubuntu 12.04vm installed on 12.04 host in Virtualbox 4.2.4 set to - Bridged network mode - Promiscuous Allow All When I try to ping the virtual guest from any network client I get the expected result. PING 192.168.1.209 (192.168.1.209) 56(84) bytes of data. 64 bytes from 192.168.1.209: icmp_req=1 ttl=64 time=0.427 ms ... Internet access inside the vm is normal But when I nmap it I get nothin! jeremy@bangkok:~$ nmap -sV -p 1-65535 192.168.1.209 Starting Nmap 5.21 ( http://nmap.org ) at 2012-11-15 18:39 CST Nmap scan report for jeremy (192.168.1.209) Host is up (0.0032s latency). All 65535 scanned ports on jeremy (192.168.1.209) are closed Service detection performed. Please report any incorrect results at http://nmap.org/submit/ Nmap done: 1 IP address (1 host up) scanned in 0.88 seconds ufw and iptables on VM... jeremy@jeremy:~$ sudo service ufw stop [sudo] password for jeremy: ufw stop/waiting jeremy@jeremy:~$ sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have scanned around and have no reason to believe that my router is blocking internal ports. jeremy@bangkok:~$ nmap -v 192.168.1.2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-11-15 18:44 CST Initiating Ping Scan at 18:44 Scanning 192.168.1.2 [2 ports] Completed Ping Scan at 18:44, 0.00s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 18:44 Completed Parallel DNS resolution of 1 host. at 18:44, 0.03s elapsed Initiating Connect Scan at 18:44 Scanning 192.168.1.2 [1000 ports] Discovered open port 445/tcp on 192.168.1.2 Discovered open port 139/tcp on 192.168.1.2 Discovered open port 3306/tcp on 192.168.1.2 Discovered open port 80/tcp on 192.168.1.2 Discovered open port 111/tcp on 192.168.1.2 Discovered open port 53/tcp on 192.168.1.2 Discovered open port 5902/tcp on 192.168.1.2 Discovered open port 8090/tcp on 192.168.1.2 Discovered open port 6881/tcp on 192.168.1.2 Completed Connect Scan at 18:44, 0.02s elapsed (1000 total ports) Nmap scan report for 192.168.1.2 Host is up (0.0017s latency). Not shown: 991 closed ports PORT STATE SERVICE 53/tcp open domain 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 445/tcp open microsoft-ds 3306/tcp open mysql 5902/tcp open vnc-2 6881/tcp open bittorrent-tracker 8090/tcp open unknown Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds Answer... Turns out all of the ports were open to the network. I installed open ssh and confirmed it. Then I edited my db conf to listen to external IP's and all was well.

    Read the article

  • OSX 10.6.6 SSH md5 break-in check

    - by Alex
    Information Recently one of the linux servers that I access was compromised to steal passwords and ssh keys using a modified ssh binary. This lead me to question if the attacker had compromised my OSX Laptop which had ssh access turned on. A sophos virus scan turned up nothing, and I did not have rkhunter installed before the attack, so I could not compare hashes of the system binaries to be sure. However because OSX is relatively standard for each of their major releases, I asked fiends for md5 hashes md5 /usr/bin/ssh and md5 /usr/sbin/sshd as a basic first check to see if there was anything different about my machine. A few emails later I have found the following data: Version (Arch) [N] MD5 (/usr/bin/ssh) MD5 (/usr/sbin/sshd) OSX 10.5.8 (PPC) [3] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.5.8 (intel) [5] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.6.x (intel) [7] 591fbe723011c17b6ce41c537353b059 e781fad4fc86cf652f6df22106e0bf0e OSX 10.6.x (intel) [4] 58be068ad5e575c303ec348a1c71d48b 33dafd419194b04a558c8404b484f650 Mine 10.6.6 (intel) df344cc00a294c91230c65e8b7332a79 b5094ccf4cd074aaf573d4f5df75906a where N is the number of machines with with that MD5, and the last row is my laptop. The sample is relatively heterogeneous spaning a few years of different makes and models of Apples, and different versions of 10.6.x. The different hash for my system made me worried that these binaries might have been compromised. So I made sure that my backup for the week was good, and dived into formatting my system and reinstalling OSX. After reinstalling OSX from the manufacturer DVD, I found that the MD5 hash did not change for either ssh, or sshd. Goal Make sure that my system is does not have any malicious software. Should I be worried that this base install of OSX (with no other software installed) has been compromised? I have also updated my system to 10.6.6 and found no change as well. Other Information I am not sure if this is helpful information, but my laptop is a i7 15 inch MacBook Pro bought in Nov 2010, and here is some output from system_profiler: System Software Overview: System Version: Mac OS X 10.6.6 (10J567) Kernel Version: Darwin 10.6.0 64-bit Kernel and Extensions: No Time since boot: 1:37 Hardware: Hardware Overview: Model Name: MacBook Model Identifier: MacBook6,2 Processor Name: Intel Core i7 Processor Speed: 2.66 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 4 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s Boot ROM Version: MBP61.0057.B0C SMC Version (system): 1.58f16 Sudden Motion Sensor: State: Enabled On the laptop, I find: $ codesign -vvv /usr/bin/ssh /usr/bin/ssh: valid on disk /usr/bin/ssh: satisfies its Designated Requirement $ codesign -vvv /usr/sbin/sshd /usr/sbin/sshd: valid on disk /usr/sbin/sshd: satisfies its Designated Requirement $ ls -la /usr/bin/ssh -rwxr-xr-x 1 root wheel 1001520 Feb 11 2010 /usr/bin/ssh $ ls -la /usr/sbin/sshd -rwxr-xr-x 1 root wheel 1304800 Feb 11 2010 /usr/sbin/sshd $ ls -la /sbin/md5 -r-xr-xr-x 1 root wheel 65232 May 18 2009 /sbin/md5 Update So far I have not gotten an answer about this question, but if you could help by increasing the number of hashes that I can compare against, that would be great. To get hashes, and version numbers, run the following on osx: md5 /usr/bin/ssh md5 /usr/sbin/sshd ssh -V sw_vers

    Read the article

  • Old operational master still thinks it is the "one"

    - by Doug
    Hi there, I have a domain with 3 AD servers for now i'll just call them: AD01 (Win 2008 GC, Operations master) AD02 (Win 2008 GC) AD03 (Win 2003 GC) A couple of months there was some hardware issues with AD01 so the operations master, PDC and Infrastructure Master was moved to AD02. All machines where on while this was happening. AD01 (Win 2008 GC) AD02 (Win 2008 GC, Operations master) AD03 (Win 2003 GC) AD01 was then shutdown for a month. Upon starting this machine up with replaced hardware (NIC and RAID card) i now have a weird problem. AD01 Thinks it is operations master still in AD on the local box AD02 & AD03 Thinks AD02 is operations master in AD on both boxes When running DCDIAG on AD01 i get a number of issues (listed below) When running "dcdiag /test:advertising" on AD01: Doing primary tests Testing server: Default-First-Site-Name\AD01 Starting test: Advertising Warning: DsGetDcName returned information for \\ad02.domain.local, when we were trying to reach AD01. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... AD01 failed test Advertising Running partition tests on : ForestDnsZones Running partition tests on : DomainDnsZones Running partition tests on : Schema Running partition tests on : Configuration Running partition tests on : domain Running enterprise tests on : domain.local When running "dcdiag" on AD01 i get the following errors (excerpt of the Final output): Testing server: Default-First-Site-Name\AD01 Starting test: Advertising Warning: DsGetDcName returned information for \\ad02.domain.local, when we were trying to reach AD01. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... AD01 failed test Advertising Starting test: FrsEvent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=domain,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=domain,DC=local Starting test: Replications [Replications Check,Replications Check] Inbound replication is disabled. To correct, run "repadmin /options AD01 -DISABLE_INBOUND_REPL" [Replications Check,AD01] Outbound replication is disabled. To correct, run "repadmin /options AD01 -DISABLE_OUTBOUND_REPL" So the problem appeasr to be that when i moved the operations master, AD01 never got the memo, and now that it's started up, all the other AD servers don't think its the boss anymore when it trys to replicate etc. So i really need to manually update AD01 so that it knows who the operations master, instrastructure and PDC is - but i'm not having any luck I've been googling for nearly a day and all solutions lead to "the cake is a lie" Your ninja skills will be greatly appreciated

    Read the article

  • GRUB 2 freezing at OS selection screen, what could be the cause?

    - by Michael Kjörling
    Mains power is somewhat unreliable where I live, so every now and then, the computer gets rebooted when the PSU can't maintain proper voltage during a brown-out or momentary black-out. It's happened a few times recently that when power is restored, the BIOS POST completes successfully, GRUB starts to load and then freezes. I've seen this at the Welcome to GRUB! message, but it seems to happen more often just past the switch to the graphical OS list. At this point, the computer will not respond to anything (arrow keys, control commands, Ctrl+Alt+Del, ...) - it simply sits there displaying this image, seemingly doing nothing more. At that point, turning the computer off using the power button and letting it sit for a while (cooling down?) has allowed it to boot successfully. Turning the computer off and immediately back on seems to give the same result (successful POST then freeze in GRUB). This behavior began recently, although does not seem to be directly correlated with my hard disk woes (although it may be relevant that GRUB resides on that physical disk, I don't know). Once the computer has booted, it runs without a hitch. I know that a "proper" solution would be to invest in a UPS, but what might be causing behavior like this? I was thinking in terms of perhaps the CPU shutting down as a thermal control measure, but if that was the cause then wouldn't I see similar freezes during use (which I do not)? What else could cause freezes apparently closely but not perfectly related to the BIOS handover from POST to OS bootloader? The BIOS settings are to reset to previous power status after a power loss. Since the PC in question is almost always turned on, this means restore to full power status. I have no expansion cards installed that make any BIOS extensions known by screen output during the boot process, at least, but I do have a few expansion cards installed. Haven't made any changes in that regard in a long time, now. I haven't touched GRUB itself for a long time, whether configuration or binaries, so I don't think that's the problem. Also, it doesn't really make sense that a bug in GRUB would manifest itself only once in a blue moon but significantly more often after a power failure.

    Read the article

  • WD1000FYPS harddrive is marked 0 mb in 3ware (and no SMART)

    - by osgx
    After reboot my SATA 1TB WD1000FYPS (previously is was "Drive error") is marked 0 mb in 3ware web gui. Complete message: Available Drives (Controller ID 0) Port 1 WDC WD1000FYPS-01ZKB0 0.00 MB NOT SUPPORTED [Remove Drive] SMART gives me only Device Model and ATA protocol version 1 (not 7-8 as it must be for SATA) What does it mean? Just before reboot, when is was marked only with "Device Error", smart was: Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: WD-WCASJ1130*** Firmware Version: 02.01B01 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Mar 7 18:47:35 2010 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 188 186 021 Pre-fail Always - 7591 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 229 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 3 7 Seek_Error_Rate 0x000e 193 193 000 Old_age Always - 125 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16615 10 Spin_Retry_Count 0x0012 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 77 192 Power-Off_Retract_Count 0x0032 198 198 000 Old_age Always - 1564 193 Load_Cycle_Count 0x0032 146 146 000 Old_age Always - 164824 194 Temperature_Celsius 0x0022 117 100 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 What can be wrong with he? Can it be restored? PS new smart is === START OF INFORMATION SECTION === Device Model: WDC WD1000FYPS-01ZKB0 Serial Number: [No Information Found] Firmware Version: [No Information Found] Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 1 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Mar 8 00:29:44 2010 MSK SMART is only available in ATA Version 3 Revision 3 or greater. We will try to proceed in spite of this. SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. Checking for SMART support by trying SMART ENABLE command. Command failed, ata.status=(0x00), ata.command=(0x51), ata.flags=(0x01) Error SMART Enable failed: Input/output error SMART ENABLE failed - this establishes that this device lacks SMART functionality. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. PPS There was a rapid grow of " 192 Power-Off_Retract_Count " before dying. The hard was used in raid, with several hards from the same fabric packaging box (close id's). The hard drives were placed identically. Rapid means almost linear grow from 300 to 1700 in 6-7 hours. Maximal temperature was 41C. (thanks to munin's smart monitoring)

    Read the article

  • How to reinstall Mac OS X on OS X/Linux dual-boot system?

    - by strangeronyourtrain
    My setup: I have a MacBook Pro 5,5 with a Mac OS X Snow Leopard partition and a Linux partition. I use rEFIt to boot into Linux. I didn't use Boot Camp when I originally installed Linux; instead, I manually created the partition (with either Disk Utility in OS X or Gparted on a Linux live CD--I don't recall which one) and then installed Linux on it from a live CD. The problem: My OS X partition is corrupt, and I need to reinstall Snow Leopard. Since I installed rEFIt from within OS X, I'm concerned that wiping the OS X partition will prevent me from booting into my Linux partition. How can I do this without losing access to my Linux partition? Is it possible to install Snow Leopard on the partition I reserved for it, or will it automatically overwrite the entire drive? And if I do the fresh OS X install and then install rEFIt again, will it automatically recognize my Linux partition? Thanks for any tips! Specs: MacBook Pro 5,5 (Mid-2009); Snow Leopard 10.6.7/64-bit Sabayon Linux, 2.6.36 kernel EDIT/UPDATE: Thanks, but the situation has taken a more complicated turn: I tried to reinstall Snow Leopard from the DVD, but it refused to install onto my Mac partition, claiming: "The disk cannot be used to start up your computer." Disk Utility wouldn't let me resize the partition or create a new one, and it doesn't see my Linux partition. It only displays the two partitions "Macintosh HD" and Linux Swap. I can, however, see all the partitions from Linux. This is the partition table as shown in Gparted: And the output of "fdisk -l" is: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 409639 204819+ ee GPT /dev/sda2 409640 349590464 174590412+ af HFS / HFS+ /dev/sda3 483122745 488392064 2634660 82 Linux swap / Solaris /dev/sda4 * 349590465 483122744 66766140 83 Linux Partition table entries are not in disk order I wonder if this is because I originally partitioned my disk with Gparted instead of OS X's Disk Utility (at this point, I don't recall whether I used Gparted or Disk Utility). In any case, it doesn't seem safe to do any reformatting with Disk Utility now, as I'm afraid it will wipe sda2 ("Macintosh HD") as well as sda4 (my Linux partition). So... I'm hoping to find a solution that doesn't involve wiping my entire hard disk. Would it be safe/possible to use Gparted to erase sda2 ("Macintosh HD") and then use the Snow Leopard DVD to install OS X onto [I]just[/I] sda2 without touching the other partitions? Thanks for any insight!

    Read the article

  • enabling gzip with htaccess...why is it hit or miss?

    - by adam-asdf
    I have shared hosting through Justhost. I use the HTML5 Boilerplate .htaccess (have tried other methods from here and there without luck) the compression part is as follows: <IfModule mod_deflate.c> # Force deflate for mangled headers developer.yahoo.com/blogs/ydn/posts/2010/12/pushing-beyond-gzipping/ <IfModule mod_setenvif.c> <IfModule mod_headers.c> SetEnvIfNoCase ^(Accept-EncodXng|X-cept-Encoding|X{15}|~{15}|-{15})$ ^((gzip|deflate)\s*,?\s*)+|[X~-]{4,13}$ HAVE_Accept-Encoding RequestHeader append Accept-Encoding "gzip,deflate" env=HAVE_Accept-Encoding </IfModule> </IfModule> # Compress all output labeled with one of the following MIME-types <IfModule mod_filter.c> AddOutputFilterByType DEFLATE application/atom+xml \ application/javascript \ application/json \ application/rss+xml \ application/vnd.ms-fontobject \ application/x-font-ttf \ application/xhtml+xml \ application/xml \ font/opentype \ image/svg+xml \ image/x-icon \ text/css \ text/html \ text/plain \ text/x-component \ text/xml </IfModule> </IfModule> However, it isn't working—at least I don't think—My home page (html) isn't compressing, the CSS and some of the JS aren't gzipped. It is failing on HTML, CSS and JS. However, some things are (or were, who knows what it will look like when you check) gzipped. My domain is http://adaminfinitum.com/ What is weird is that the (Google) PageSpeed browser extension for Firefox (whatever the current version is [Nov. 2012]) gives me a 95% speed rating (and no warnings about compression), yet YSlow and Chrome developer tools both flag me about gzip, as does a tool I found on here while researching this. To reduce cookies I set up a subdomain on my site and I thought maybe that was it so I added an .htaccess there also, but no luck. To reduce http requests I embedded some of webfonts and images in CSS (HTML5 BP stipulates not to compress images, and apparently '.woff' files are already compressed) so I thought maybe that was it and I spent all day separating and asynchronously loading those portions (via Modernizr.load) but that hasn't helped either...if anything it made it worse due to increasing http requests (I realize speed scores of async resources may be misleading). Researching this, it seems to be a fairly common issue but I haven't found an explanation/solution. I don't think it is a MIME-type issue, I have quadruple checked (and thrice edited) my .htaccess files. My hosting company said they run Apache 2.2.22 and I have looked at everything I can find. What gives?

    Read the article

< Previous Page | 688 689 690 691 692 693 694 695 696 697 698 699  | Next Page >