Search Results

Search found 24731 results on 990 pages for 'corner case'.

Page 697/990 | < Previous Page | 693 694 695 696 697 698 699 700 701 702 703 704  | Next Page >

• Has test driven development (TDD) actually benefited a real world project?

  - by James

  I am not new to coding. I have been coding (seriously) for over 15 years now. I have always had some testing for my code. However, over the last few months I have been learning test driven design/development (TDD) using Ruby on Rails. So far, I'm not seeing the benefit. I see some benefit to writing tests for some things, but very few. And while I like the idea of writing the test first, I find I spend substantially more time trying to debug my tests to get them to say what I really mean than I do debugging actual code. This is probably because the test code is often substantially more complicated than the code it tests. I hope this is just inexperience with the available tools (RSpec in this case). I must say though, at this point, the level of frustration mixed with the disappointing lack of performance is beyond unacceptable. So far, the only value I'm seeing from TDD is a growing library of RSpec files that serve as templates for other projects/files. Which is not much more useful, maybe less useful, than the actual project code files. In reading the available literature, I notice that TDD seems to be a massive time sink up front, but pays off in the end. I'm just wondering, are there any real world examples? Does this massive frustration ever pay off in the real world? I really hope I did not miss this question somewhere else on here. I searched, but all the questions/answers are several years old at this point. It was a rare occasion when I found a developer who would say anything bad about TDD, which is why I have spent as much time on this as I have. However, I noticed that nobody seems to point to specific real-world examples. I did read one answer that said the guy debugging the code in 2011 would thank you for have a complete unit testing suite (I think that comment was made in 2008). So, I'm just wondering, after all these years, do we finally have any examples showing the payoff is real? Has anybody actually inherited or gone back to code that was designed/developed with TDD and has a complete set of unit tests and actually felt a payoff? Or did you find that you were spending so much time trying to figure out what the test was testing (and why it was important) that you just tossed out the whole mess and dug into the code?

  Read the article

• Why would more CPU cores on virtual machine slow compile times?

  - by Sid

  [edit#2] If anyone from VMWare can hit me up with a copy of VMWare Fusion, I'd be more than happy to do the same as a VirtualBox vs VMWare comparison. Somehow I suspect the VMWare hypervisor will be better tuned for hyperthreading (see my answer too) I'm seeing something curious. As I increase the number of cores on my Windows 7 x64 virtual machine, the overall compile time increases instead of decreasing. Compiling is usually very well suited for parallel processing as in the middle part (post dependency mapping) you can simply call a compiler instance on each of your .c/.cpp/.cs/whatever file to build partial objects for the linker to take over. So I would have imagined that compiling would actually scale very well with # of cores. But what I'm seeing is: 8 cores: 1.89 sec 4 cores: 1.33 sec 2 cores: 1.24 sec 1 core: 1.15 sec Is this simply a design artifact due to a particular vendor's hypervisor implementation (type2:virtualbox in my case) or something more pervasive across more VMs to make hypervisor implementations more simpler? With so many factors, I seem to be able to make arguments both for and against this behavior - so if someone knows more about this than me, I'd be curious to read your answer. Thanks Sid [edit:addressing comments] @MartinBeckett: Cold compiles were discarded. @MonsterTruck: Couldn't find an opensource project to compile directly. Would be great but can't screwup my dev env right now. @Mr Lister, @philosodad: Have 8 hw threads, using VirtualBox, so should be 1:1 mapping without emulation @Thorbjorn: I have 6.5GB for the VM and a smallish VS2012 project - it's quite unlikely that I'm swapping in/out trashing the page file. @All: If someone can point to an open source VS2010/VS2012 project, that might be a better community reference than my (proprietary) VS2012 project. Orchard and DNN seem to need environment tweaking to compile in VS2012. I really would like to see if someone with VMWare Fusion also sees this (for VMWare vs VirtualBox compartmentalization) Test details: Hardware: Macbook Pro Retina CPU : Core i7 @ 2.3Ghz (quad core, hyper threaded = 8 cores in windows task manager) Memory : 16 GB Disk : 256GB SSD Host OS: Mac OS X 10.8 VM type: VirtualBox 4.1.18 (type 2 hypervisor) Guest OS: Windows 7 x64 SP1 Compiler: VS2012 compiling a solution with 3 C# Azure projects Compile times measure by VS2012 plugin called 'VSCommands' All tests run 5 times, first 2 runs discarded, last 3 averaged

  Read the article

• One Year Oracle SocialChat - The Movie

  - by mprove

  Tweet | Like | Watch on Vimeo You’ve just watched – hopefully – my first short movie. Thank you! Here is a bit of the back stage story. About 6 weeks ago colleagues from SNBC (Social Network and Business Collaboration) announced a Social Use Case Competition. It was expected to submit a video of 2 to 5 minutes duration on the Social Enterprise (our internal phrase for Enterprise 2.0). Hmm – I had a few vague ideas, but no script – no actors – no experience in film making. Really the best conditions to try something! I chose our weekly SocialChats as my main topic. But if you don’t do Danish Dogma cinema, you still need a script. Hence I played around with the SocialChat’s archive, and all of a sudden a script and even the actors appeared in front of me. The words that you have just seen are weekly topics. Slightly abridged and rearranged to form a story. Exciting, next phase. How to get it on digital celluloid? I have to confess I am still impressed by epic. (Keep in mind, epic was done in 2004.) And my actors – words – call for a typographic style already. The main part was done over a weekend with Apple Keynote. And I even found a wonderful matching soundtrack among my albums: Didge Goes World by Delago. I picked parts of Second Day and Seventh Day. Literally, the rhythm was set, and I "just" had to complete the movie. Tools used – apart from trial and error: Keynote, Pixelmator, GarageBand, iMovie. Finally I want to mention that I am extremely thankful to BSC Music for granting permissions to use the tracks for this short film! Without this sound it would have been just an ordinary slide show. – Internal note: The next SocialChat is on Death by PowerPoint vs. Presentation Zen. CU this Friday 3pm Greenwich / 7am Pacific.

  Read the article

• Ubuntu is booting on acer e1-510 laptop, but screen displays nothing

  - by user287602

  Tried loading ubuntu 12.04 (32-bit as well 64 bit) through bootable usb , on a brand new 64-bit acer E1-510 laptop. It shows the 'Try ubuntu without installing screen' and I selected that option. But instead of showing ubuntu's logo(which implies it is loading). I get a blank screen. The screen is on, but it shows nothing. I tried the same on an old model laptop acer aspire 5738 and it worked like a charm. However, I realized that Ubuntu is actually booting on E1-510 and only the display is not working. How did I arrive at this conclusion? When I select on 'Try ubuntu without installing screen', after about 8-10 seconds I see that the WiFi indicator light on the laptop panel switches on(just like when we boot up a Windows OS or even Ubuntu ). I got an idea that the system booted Ubuntu. To confirm this, I tried to adjust volume using keyboard shortcuts. Voila, I can hear the sound of adjusting volume! That means it has already booted Ubuntu. I confirmed this with another step. I pressed the power button once and after two seconds I pressed ENTER. It began the process of switching off and within 5 seconds the laptop was powered off. You may ask, Why is this a confirmation that Ubuntu has booted? This is because in Ubuntu when you press on power button, a dialog box opens with shut down, restart, suspend option- and the shut down option is already selected by default; so all I have to do is press ENTER to shut down. This again proved that Ubuntu was indeed up and running. Unlike previous 'AskUbunutu' posts about Acer e1-510, I must mention that my laptop came WITH the Legacy BIOS mode, so its not really a problem to boot ubuntu from a bootable pendrive. Only the screen is not working. In case you need to know, I am running Windows 7-Ultimate 64 bit on acer e1-510.

  Read the article

• Data structures for a 2D multi-layered and multi-region map?

  - by DevilWithin

  I am working on a 2D world editor and a world format subsequently. If I were to handle the game "world" being created just as a layered set of structures, either in top or side views, it would be considerably simple to do most things. But, since this editor is meant for 3rd parties, I have no clue how big worlds one will want to make and I need to keep in mind that eventually it will become simply too much to check, handling and comparing stuff that are happening completely away from the player position. I know the solution for this is to subdivide my world into sub regions and stream them on the fly, loading and unloading resources and other data. This way I know a virtually infinite game area is achievable. But, while I know theoretically what to do, I really have a few questions I'd hoped to get answered for some hints about the topic. The logic way to handle the regions is some kind of grid, would you pick evenly distributed blocks with equal sizes or would you let the user subdivide areas by taste with irregular sized rectangles? In case of even grids, would you use some kind of block/chunk neighbouring system to check when the player transposes the limit or just put all those in a simple array? Being a region a different data structure than its owner "game world", when streaming a region, would you deliver the objects to the parent structures and track them for unloading later, or retain the objects in each region for a more "hard-limit" approach? Introducing the subdivision approach to the project, and already having a multi layered scene graph structure on place, how would i make it support the new concept? Would you have the parent node have the layers as children, and replicate in each layer node, a node per region? Or the opposite, parent node owns all the regions possible, and each region has multiple layers as children? Or would you just put the region logic outside the graph completely(compatible with the first suggestion in Q.3) When I say virtually infinite worlds, I mean it of course under the contraints of the variable sizes and so on. Using float positions, a HUGE world can already be made. Do you think its sane to think beyond that? Because I think its ok to stick to this limit since it will never be reached so easily.. As for when to stream a region, I'm implementing it as a collection of watcher cameras, which the streaming system works with to know what to load/unload. The problem here is, i will be needing some kind of warps/teleports built in for my game, and there is a chance i will be teleporting a player to a unloaded region far away. How would you approach something like this? Is it sane to load any region to memory which can be teleported to by a warp within a radius from the player? Sorry for the huge question, any answers are helpful!

  Read the article

• Real-Time Multi-User Gaming Platform

  - by Victor Engel

  I asked this question at Stack Overflow but was told it's more appropriate here, so I'm posting it again here. I'm considering developing a real-time multi-user game, and I want to gather some information about possibilities before I do some real development. I've thought about how best to ask the question, and for simplicity, the best way that occurred to me was to make an analogy to the field (or playground) game darebase. In the field game of darebase, there are two or more bases. To start, there is one team on each base. The game is a fancy game of tag. When two people meet out in the field, the person who left his base most recently timewise captures the other person. They then return to that person's base. Play continues until everyone is part of the same team. So, analogizing this to an online computer game, let's suppose there are an indefinite number of bases. When a person starts up the game, he has a team that is located at, for example, his current GPS coordinates. It could be a virtual world, but for sake of argument, let's suppose the virtual world corresponds to the player's actual GPS coordinates. The game software then consults the database to see where the closest other base is that is online, and the two teams play their game of virtual tag. Note that the user of the other base could have a different base than the one run by the current user as the closest base to him, in which case, he would be in two simultaneous battles, one with each base. When they go offline, the state of their players is saved on a server somewhere. Game logic calls for the players to have some automaton-logic of some sort, so they can fend for themselves in a limited way using basic rules, until their user goes online again. The user doesn't control the players' movements directly, but issues general directives that influence the players' movement logic. I think this analogy is good enough to frame my question. What sort of platforms are available to develop this sort of game? I've been looking at smartfoxserver, but I'm not convinced yet that it is the best option or even that it will work at all. One possibility, of course, would be to roll out my own web server, but I'd rather not do that if there is an existing service out there already that I could tap into. I will be developing for iOS devices at first. So any suggestions would be greatly appreciated. I think I need to establish the architecture first before proceeding with this project. Note that darbase is not the game I intend to implement, but, upon reflection, that might not be a bad idea either.

  Read the article

• SQL Azure Security: DoS Part II

  - by Herve Roggero

  Ah!  When you shoot yourself in the foot... a few times... it hurts! That's what I did on Sunday, to learn more about the behavior of the SQL Azure Denial Of Service prevention feature. This article is a short follow up to my last post on this feature. In this post, I will outline some of the lessons learned that were the result of testing the behavior of SQL Azure from two machines. From the standpoint of SQL Azure, they look like one machine since they are behind a NAT. All logins affected The first thing to note is that all the logins are affected. If you lock yourself out to a specific database, none of the logins will work on that database. In fact the database size becomes "--" in the SQL Azure Portal.   Less than 100 sessions I was able to see 50+ sessions being made in SQL Azure (by looking at sys.dm_exec_sessions) before being locked out. The the DoS feature appears to be triggered in part by the number of open sessions. I could not determine if the lockout is triggered by the speed at which connection requests are made however.   Other Databases Unaffected This was interesting... the DoS feature works at the database level. Other databases were available for me to use.   Just Wait Initially I thought that going through SQL Azure and connecting from there would reset the database and allow me to connect again. Unfortunately this doesn't seem to be the case. You will have to wait. And the more you lock yourself out, the more you will have to wait... The first time the database became available again within 30 seconds or so; the second time within 2-3 minutes and the third time... within 2-3 hours...   Successful Logins The DoS feature appears to engage only for valid logins. If you have a login failure, it doesn't seem to count. I ran a test with over 100 login failures without being locked.

  Read the article

• Headaches using distributed version control for traditional teams?

  - by J Cooper

  Though I use and like DVCS for my personal projects, and can totally see how it makes managing contributions to your project from others easier (e.g. your typical Github scenario), it seems like for a "traditional" team there could be some problems over the centralized approach employed by solutions like TFS, Perforce, etc. (By "traditional" I mean a team of developers in an office working on one project that no one person "owns", with potentially everyone touching the same code.) A couple of these problems I've foreseen on my own, but please chime in with other considerations. In a traditional system, when you try to check your change in to the server, if someone else has previously checked in a conflicting change then you are forced to merge before you can check yours in. In the DVCS model, each developer checks in their changes locally and at some point pushes to some other repo. That repo then has a branch of that file that 2 people changed. It seems that now someone must be put in charge of dealing with that situation. A designated person on the team might not have sufficient knowledge of the entire codebase to be able to handle merging all conflicts. So now an extra step has been added where someone has to approach one of those developers, tell him to pull and do the merge and then push again (or you have to build an infrastructure that automates that task). Furthermore, since DVCS tends to make working locally so convenient, it is probable that developers could accumulate a few changes in their local repos before pushing, making such conflicts more common and more complicated. Obviously if everyone on the team only works on different areas of the code, this isn't an issue. But I'm curious about the case where everyone is working on the same code. It seems like the centralized model forces conflicts to be dealt with quickly and frequently, minimizing the need to do large, painful merges or have anyone "police" the main repo. So for those of you who do use a DVCS with your team in your office, how do you handle such cases? Do you find your daily (or more likely, weekly) workflow affected negatively? Are there any other considerations I should be aware of before recommending a DVCS at my workplace?

  Read the article

• WebCenter Customer Spotlight: Azul Brazilian Airlines

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryAzul Linhas Aéreas Brasileiras (Azul Brazilian Airlines) is the third-largest airline in Brazil serving  42 destinations with a fleet of 49 aircraft and employs 4,500 crew members. The company wanted to offer an innovative site with a simple purchasing process for customers to search for and buy tickets and for the company’s marketing team to more effectively conduct its campaigns. To this end, Azul implemented Oracle WebCenter Sites, succeeding in gathering all of the site’s key information onto a single platform. Azul can now complete the Web site content updating process—which used to take approximately 48 hours—in less than five minutes. Company OverviewAzul Linhas Aéreas Brasileiras (Azul Brazilian Airlines) has established itself as the third-largest airline in Brazil, based on a business model that combines low prices with a high level of service. Azul serves 42 destinations with a fleet of 49 aircraft. It operates 350 daily flights with a team of 4,500 crew members. Last year, the company transported 15 million passengers, achieving a 10% share of the Brazilian market, according to the Agência Nacional de Aviação Civil (ANAC, or the National Civil Aviation Agency). Business ChallengesThe company wanted to offer an innovative site with a simple purchasing process for customers to search for and buy tickets and for the company’s marketing team to more effectively conduct its campaigns. Provide customers with an  innovative Web site with a simple process for purchasing flight tickets Bring dynamism to the Web site’s content updating process to provide autonomy to the airline’s strategic departments, such as marketing and product development Facilitate integration among the site’s different application providers, such as ticket availability and payment process, on which ticket sales depend Solution DeployedAzul worked with the  Oracle partner TQI to implement Oracle WebCenter Sites, succeeding in gathering all of the site’s key information onto a single platform. Previously, at least three servers and corporate information environments had directed data to the portal. The single Oracle-based platform now facilitates site updates, which are daily and constant. Business Results Gained development freedom in all processes—from implementation to content editing Gathered all of the Web site’s key information onto a single platform, facilitating its daily and constant updating, whereas the information was previously spread among at least three IT environments and had to go through a complex process to be made available online to customers Reduced time needed to update banners and other Web site content from an average of 48 hours to less than five minutes Simplified the flight ticket sales process thanks to tool flexibility that enabled the company to improve Website usability “Oracle WebCenter Sites provides an easy-to-use platform that enables our marketing department to spend less time updating content and more time on innovative activities. Previously, it would take 48 hours to update content on our Web site; now it takes less than five minutes. We have shown the market that we are innovators, enabling customer convenience through an improved flight ticket purchase process.” Kleber Linhares, Information Technology and E-Commerce Director, Azul Linhas Aéreas Brasileiras Additional Information Azul Brazilian Airlines Case Study Oracle WebCenter Sites Oracle WebCenter Sites Satellite Server

  Read the article

• Lookup Viewer

  - by Geertjan

  The Maven integrated view that I showed yesterday I was able to create because I happened to know that an implementation of SubprojectProvider and LogicalViewProvider are in the Lookup of Maven projects. With that knowledge, I was able to use and even delegate to those implementations. But what if you don't know that those implementations are in the Lookup of the Project object? In the case of the Maven Project implementation, you could look in the source code of the Maven Project implementation, at the "getLookup" method. However, any other module could be putting its own objects into that Lookup, dynamically, i.e., at runtime. So there's no way of knowing what's in the Lookup of any Project object or any other object with a Lookup. But now imagine that you have a Lookup Viewer, as a tool during development, which you would exclude when distributing the application. Whenever new objects are found in the Lookup, the viewer displays them. You could install the Lookup Viewer into NetBeans IDE, or any other NetBeans Platform application, and then get a quick impression of what's actually in the Lookup when you select a different item in the application during development. Here it is (though I vaguely remember someone else writing something similar): Above, a Maven Project is selected. The Lookup Window shows that, among many other classes, an implementation of SubprojectProvider and LogicalViewProvider are found in the Lookup when the Maven Project is selected. If an item in the Lookup Window has its own Lookup, the content of that Lookup is displayed as child nodes of the Lookup, etc, i.e., you can explore all the way down the Lookup of each item found within objects found within the current selection. (What's especially fun is seeing the SaveCookieImpl being added and removed from the Lookup Window when you make/save a change in a document.) Another example is below, showing the Lookup Window installed in a custom application created during a course at MIT in Boston: A small trick I had to apply is that I always show the previous Lookup, since the current Lookup, when you select one of the Nodes in the Lookup Window, would be the Lookup of the Lookup Window itself! If anyone is interested in this, I can publish the NetBeans module providing the above window to the NetBeans update center. 

  Read the article

• Are we ready for the Cloud computing era?

  - by andrewkatumba

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} "Elite?" developer circles are abuzz with the notion of Cloud computing . The increasing bandwidth, the desire for faster and leaner operations and ofcourse the need for outsourcing non core it related business requirements e.g wordprocessing, spreadsheets, data backups. In strolls Chrome OS (am sure other similar OSes will join with their own wagons for us to jump on), offering just that, internet based services(more like a repository of), quick efficient and "reliable" and for the most part cheap and often time even free! And we all go rhapsodic!  It boils down to the age old dilemma, "if the cops are so busy protecting us then who will protect them" (even the folks back at Hollywood keep us reminded)! Who is going to ensure that these internet based services do not go down(either intentionally or by some malicious third party) leading to a multinational colossal disaster .At the risk of sounding pessimistic,  IT IS NOT AN ISSUE OF TRUST, this is but a mere case of Murphy's Law!  What then? Should the "cloud" be trusted to this extent at this time?  This is an era where challenges are rapidly solved with lightning promptness to "beat the competition", my hope is that our solutions are not just creating problems that we may not be able to solve!  Keeping my ear on the Ground.

  Read the article

• At $20/month Windows Azure host my website with 99.97% uptime

  - by Gopinath

  Couple of years ago a reliable and decent performing Windows hosting was not affordable to many enthusiastic developers who want to try a startup idea or build a hobby site. I tried to start an ASP.NET website few years ago to provide services like – Mobile Tracing, Vehicle Tracing. But due to high cost of Windows hosting I developed those services using PHP (not an easy task for .NET developer) and hosted on them Linux servers.  But with recent evolution of Windows Azure, hosting ASP.NET websites on highly reliable servers is affordable. Today anyone can host a high responsive and available ASP.NET website for just $20/month using Windows Azure. My website coziie.com is running on Windows Azure and serves close to quarter millions visitors a month with 99.97% of uptime and most of the page load times are less than 3 seconds. All I spend to run this website is just around $20, if you translate it to India rupees its roughly Rs.1000. The web sever of coziie.com is powered by a single Extra Small Web role instance and the backend is powered by a SQL Azure instance. Azure is quite impressive to provide 99.97% of uptime. Response times during peak are around 3 seconds and on nomarl loads it is around 1.5 seconds. Here is the report of uptime provided by Royal Pingdom over last one year For just $20/month Windows Azure takes care of the following apart from hosting Patches up Windows OS to the latest version Upgrades ASP.NET to the latest version – coziie.com is running on ASP.NET MVC 3 and soon I’ll upgrade it to ASP.NET MVC 4 Hosts data on latest and best version Sql Server database SQL Azure maintains 3 copies of database and automatically recovers in case of server failures and disasters. I never worry about database backups/restore. Provides staging environment for deploying applications for testing purpose and move them to production – I upgrade  twice a month on average With Windows Azure I no longer focus on server maintenance or data backups. They are taken up by Microsoft team and I just focus on building my website. Wish there is a low cost Linux version of Windows Azure so that I can stop worrying about server maintenance of this blog!! If you are looking for a Windows hosting, look no further than Windows Azure. If you find $20/month is a bit expensive to start with you may explore Azure Website (sort of shared hosted environment) which is free to start with and as your traffic grows you can move to paid hosting.

  Read the article

• Behaviour Trees with irregular updates

  - by Robominister

  I'm interested in behaviour trees that aren't iterated every game tick, but every so often. (Edit: the tree could specify how many frames within the main game loop to wait before running its tick function again). Every theoretical implementation I have seen of behaviour trees talks of the tree search being carried out every game update - which seems necessary, because a leaf node (eg a behaviour, like 'return to base') needs to be constantly checked to see if is still running, failed or completed. Can anyone suggest how I might start implementing a tree that isnt run every tick, or point me in the direction of good material specific to this case (I am struggling to find anything)? My thoughts so far: action leaf nodes (when they start) must only push some kind of action object onto a list for an entity, rather than directly calling any code that makes the entity do something. The list of actions for the entity would be run every frame (update any that need to run, pop any that have completed from the list). the return state from a given action must be fed back into the tree, so that when we run the tree iteration again (and reach the same action leaf node - so the tree has so far determined that we ought to still be trying this action) - that the action has completed, or is still running etc. If my actual action code is running from an action list on an entity, then I possibly need to cancel previously running actions in the list - i am thinking that I can just delete the entire stack of queued up actions. I've seen the idea of ActionLists which block lower priority actions when a higher priority one is added, but this seems like very close logic to behaviour trees, and I dont want to be duplicating behaviour. This leaves me with some questions 1) How would I feed the action return state back into the tree? Its obvious I need to store some information relating to 'currently executing actions' on the entity, and check that in the tree tick, but I can't imagine how. 2) Does having a seperate behaviour tree (for deciding behaviour) and action list (for carrying out actual queued up actions) sound like a reasonable approach? 3) Is the approach of updating a behaviour tree irregularly actually used by anyone? It seems like a nice idea for budgeting ai search time when you have a lot of ai entities to process. (Edit) - I am also thinking about storing a single instance of a given behaviour tree in memory, and providing it by reference to any entity that uses it. So any information about what action was last selected for execution on an entity must be stored in a data context relative to the entity (which the tree can check). (I am probably answering my own questions as i go!) I hope I have expressed my questions adequately! Thanks in advance for any help :)

  Read the article

• Pathfinding for fleeing

  - by Philipp

  As you know there are plenty of solutions when you wand to find the best path in a 2-dimensional environment which leads from point A to point B. But how do I calculate a path when an object is at point A, and wants to get away from point B, as fast and far as possible? A bit of background information: My game uses a 2d environment which isn't tile-based but has floating point accuracy. The movement is vector-based. The pathfinding is done by partitioning the game world into rectangles which are walkable or non-walkable and building a graph out of their corners. I already have pathfinding between points working by using Dijkstras algorithm. The use-case for the fleeing algorithm is that in certain situations, actors in my game should perceive another actor as a danger and flee from it. The trivial solution would be to just move the actor in a vector in the direction which is opposite from the threat until a "safe" distance was reached or the actor reaches a wall where it then covers in fear. The problem with this approach is that actors will be blocked by small obstacles they could easily get around. As long as moving along the wall wouldn't bring them closer to the threat they could do that, but it would look smarter when they would avoid obstacles in the first place: Another problem I see is with dead ends in the map geometry. In some situations a being must choose between a path which gets it faster away now but ends in a dead end where it would be trapped, or another path which would mean that it wouldn't get that far away from the danger at first (or even a bit closer) but on the other hand would have a much greater long-term reward in that it would eventually get them much further away. So the short-term reward of getting away fast must be somehow valued against the long-term reward of getting away far. There is also another rating problem for situations where an actor should accept to move closer to a minor threat to get away from a much larger threat. But completely ignoring all minor threats would be foolish, too (that's why the actor in this graphic goes out of its way to avoid the minor threat in the upper right area): Are there any standard solutions for this problem?

  Read the article

• Current State EA: Focus on the Integration!!!

  - by Eric A. Stephens

  A recent project has me at the front end of a large implementation effort covering multiple software components. In addition to the challenges of integrating 15-20 separate and new software components there is the challenge of integrating the portfolio into an existing environment. Like other clients I've worked with and other environments I've worked in for many years, this is typical. The applications are undocumented and under patched leading to a mystery for any architect leading change.  We can boil down most architecture development methodologies (ADM) into first understanding the current/baseline state and then envisioning one or more future states. Many pundits emphasize the need to focus on the future/target states. I agree since enterprise architecture (EA) is about where you are going and not so much where you have been. But to be effective in the future, I contend some focused time needs to be spent on the current state. And specifically on the integration. Integration is always the difficult part of a project (I might put it more coarsely at a cocktail party). While I don't have a case study, my anecdotal experience suggests poorly integrated application portfolios tend to cost more to operate and create entropy when trying to respond to new changes and opportunities. In the aforementioned project, I was able to get one of our EAs assigned to focus on just integration almost immediately. While we're still early in the process, this EA is uncovering all sorts of information that will greatly assist our future state planning for this solution. This information is driving early decision making that we anticipate will accelerate our efforts moving forward. #next_pages_container { width: 5px; hight: 5px; position: absolute; top: -100px; left: -100px; z-index: 2147483647 !important; } #next_pages_container { width: 5px; hight: 5px; position: absolute; top: -100px; left: -100px; z-index: 2147483647 !important; } #next_pages_container { width: 5px; hight: 5px; position: absolute; top: -100px; left: -100px; z-index: 2147483647 !important; } #next_pages_container { width: 5px; hight: 5px; position: absolute; top: -100px; left: -100px; z-index: 2147483647 !important; }

  Read the article

• Accessing SQL Server data from iOS apps

  - by RobertChipperfield

  Almost all mobile apps need access to external data to be valuable. With a huge amount of existing business data residing in Microsoft SQL Server databases, and an ever-increasing drive to make more and more available to mobile users, how do you marry the rather separate worlds of Microsoft's SQL Server and Apple's iOS devices? The classic answer: write a web service layer Look at any of the questions on this topic asked in Internet discussion forums, and you'll inevitably see the answer, "just write a web service and use that!". But what does this process gain? For a well-designed database with a solid security model, and business logic in the database, writing a custom web service on top of this just to access some of the data from a different platform seems inefficient and unnecessary. Desktop applications interact with the SQL Server directly - why should mobile apps be any different? The better answer: the iSql SDK Working along the lines of "if you do something more than once, make it shared," we set about coming up with a better solution for the general case. And so the iSql SDK was born: sitting between SQL Server and your iOS apps, it provides the simple API you're used to if you've been developing desktop apps using the Microsoft SQL Native Client. It turns out a web service remained a sensible idea: HTTP is much more suited to the Big Bad Internet than SQL Server's native TDS protocol, removing the need for complex configuration, firewall configuration, and the like. However, rather than writing a web service for every app that needs data access, we made the web service generic, serving only as a proxy between the SQL Server and a client library integrated into the iPhone or iPad app. This client library handles all the network communication, and provides a clean API. OSQL in 25 lines of code As an example of how to use the API, I put together a very simple app that allowed the user to enter one or more SQL statements, and displayed the results in a rather primitively formatted text field. The total amount of Objective-C code responsible for doing the work? About 25 lines. You can see this in action in the demo video. Beta out now - your chance to give us your suggestions! We've released the iSql SDK as a beta on the MobileFoo website: you're welcome to download a copy, have a play in your own apps, and let us know what we've missed using the Feedback button on the site. Software development should be fun and rewarding: no-one wants to spend their time writing boiler-plate code over and over again, so stop writing the same web service code, and start doing exciting things in the new world of mobile data!

  Read the article

• Training v. Teaching

  - by Chris Gardner

  Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2014/05/28/training-v.-teaching.aspxAs some of you may know, I recently accepted a position to teach an undergraduate course at my alma mater. Yesterday, I had my first day in an academic classroom. I immediately noticed a difference with the interactions between the students. They don't act like students in a professional training or conference talk. I wanted to use this opportunity to enumerate some of those differences. The immediate thing I noticed was the lack of open environment. This is not to say the class was hostile towards me. I am used to entering the room, bantering with audience, loosening everyone a bit, and flowing into the discussion. A purely academic audience does not banter. At least, they do not banter on day one. I think I can attribute this to two factors. This first is a greater perception of authority. In a training or conference environment, I am an equal with the audience. This is true even if I am being a subject matter expert. We're all professionals. We're all there to learn from each other, share our stories, and enjoy the journey. In the academic classroom, there was a distinct class difference. I had forgotten about this distinction; I had the professional familiarity with the staff by the time I completed my masters. This leads to the other distinction. These was an expectation of performance. At conference and professional training, there is generally no (immediate) grading. This may be a preparation for a certification exam, but I'm not the one responsible for delivering the exam. This was not the case in the academic classroom. These students are battling for points, and I am the sole arbiter. These students are less likely to let the material wash over them, applying the material to their past experiences. They were down taking notes. I don't want to leave the impression that there was no interact in the classroom. I spent a good deal of time doing problems with the class on the whiteboard. I tried to get the class to help me work out the steps. This opened up a few of them. After every conference or training class, I always get a few people that will email me afterward to continue the conversation. I am very curious to see if anybody comes to my office hours tomorrow. However, that is a curiosity that will have to wait until tomorrow.

  Read the article

• How to optimise mesh data

  - by Wardy

  So i have some procedurally generated mesh data and i want to reduce it down to its minimum number of verts. In case it matters this is a unity project. Working on the basis of a simple example, lets assume a typical flat surface of points 2 by 3. The point / vertex at [1,1] is used in many triangles. I've generated mesh for a voxel type engine that adds verts to a list based on face visiblility and now I want to remove all the duplicates. Can anyone come up with an efficient way of doing this because what i have is sooo bad its not even funny (and i don't even think it's logically correct) ... private void Optimize() { Vector3 v; Vector3 v2; for (int i = 0; i < Vertices.Count; i++) { v = Vertices[i]; for (int j = i+1; j < Vertices.Count; j++) { v2 = Vertices[j]; if (v.x == v2.x && v.y == v2.y && v.z == v2.z) { for (int ind = 0; ind < Indices.Count; ind++) { if (Indices[ind] == j) { Indices[ind] = i; } else if (Indices[ind] > j && Indices[ind] > 0) Indices[ind]--; } Vertices.RemoveAt(j); Uvs.RemoveAt(j); Normals.RemoveAt(j); } } } } EDIT: Ok i managed to get this (code sample above updated) to render an "optimised" set of verts but the UV data is all wrong now, which would make sense because i'm basically just removing any UV Vector that represents a UV coord for a removed vert and not actually considering what I need to do to "fix the tri" so to speak. The code now seemingly does work but its quite time consuming, still looking to further optimise.

  Read the article

• Loading another domain's content in a modal iframe - acceptable?

  - by user568458

  Is it okay to load another page in an iframe in a modal pop-up window - in terms of legal and ethical standards around displaying 3rd party content? I remember a few years ago there was controversy and a debate about whether it was okay to load another domain's page content on your domain in a full-width iframe, with your site providing a masthead with controls for favouriting, linking etc (e.g. like StumbleUpon). I seem to recall that the consensus was, that it was okay so long as you were clearly in no way claiming ownership of the 3rd party content or attempting to modify the content and so long as there was a 'go to site' button or equivalent; and that sites could ask you to exclude them, but generally speaking, it's an acceptable practice. How acceptable would it be considered to be to load another site's page within a modal (lightbox-like) popup box (following all the above principles: clear attribution and a prominent button that kills the iframe and gives them the 3rd party original)? My expectation would be that it would follow the same principles, and be acceptable so long as these conditions were met. Note that I'm asking about the likely legitimate responses of the 3rd party sites and possible legal position, not about usability or UX. I'm aware that this should never ever ever ever ever be the standard way external links are loaded, and that 99% of the time linking to external content like this would be terrible for usability. My specific use case is one of those 1% of cases where loading a separate page in this tab actually wouldn't be the expected behaviour of a link: an interactive data visualisation tool that also acts as a 'browser' of external content (science papers underlying the data it navigates). All other links within the interactive will change something while staying on the same page. If the user clicked one of these external links by mistake (as people often do, even when they are clearly, noisily labelled) and then had to back-button back, they would lose their fine-grained position in the interactive tool (jquery bbq hashchanges being not appropriate for all elements of the tool). New window/tab will simply open the target page on the 3rd party domain. Opening a new window/tab would also be an alternative option (and has its own disadvantages) - my question is, whether this is an alternative that could be considered (in terms of acceptable practice around intellectual property etc), irrespective of which option is best for UX: which is something we'll decide the proper way, based on actual UX testing.

  Read the article

• Jitter during wall collisions with Bullet Physics: contact/penetration tolerance?

  - by Niriel

  I use the bullet physics engine through Panda3d. My scene is still very simple, think 'Wolfenstein3d': tile-based, walls are solid cubes. I expect walls to block the player, and I expect the player to slide along the walls in case of non-normal incidence. What I get is what I expect, with one difference: there is some jitter. If I try to force myself into the wall, then I see the frames blinking quickly between two positions. These differ by about 0.04 units of distance, which corresponds to 4 cm in my game. I noticed a 4 cm elsewhere: the bottom of my player capsule is 4 cm below ground, when at rest. Does that mean that there is somewhere in the Bullet engine a default 0.04-units-long tolerance to differentiate contact from collision? If so, what should I do ? Should I change the scale of my game so that these 0.04 units correspond to 0.4 cm, making the jitter ten times smaller? Or can I ask bullet to change its tolerance to a smaller value? Edit This is the jitter I get: 6.155 - 6.118 = 0.036 LPoint3f(0, 6.11694, 0.835) LPoint3f(0, 6.15499, 0.835) LPoint3f(0, 6.11802, 0.835) LPoint3f(0, 6.15545, 0.835) LPoint3f(0, 6.11817, 0.835) LPoint3f(0, 6.15726, 0.835) LPoint3f(0, 6.11876, 0.835) LPoint3f(0, 6.15911, 0.835) LPoint3f(0, 6.11937, 0.835) I found a setMargin method. I set it to 5 mm both on the BoxShape for the walls and on the Capsule shape for the player. It still jitters by about 35 mm as illustrated by this log (11.117 - 11.082 = 0.035): LPoint3f(0, 11.0821, 0.905) LPoint3f(0, 11.1169, 0.905) LPoint3f(0, 11.082, 0.905) LPoint3f(0, 11.117, 0.905) LPoint3f(0, 11.082, 0.905) LPoint3f(0, 11.117, 0.905) LPoint3f(0, 11.0821, 0.905) LPoint3f(0, 11.1175, 0.905) LPoint3f(0, 11.0822, 0.905) LPoint3f(0, 11.1178, 0.905) LPoint3f(0, 11.0823, 0.905) LPoint3f(0, 11.1183, 0.905) The margin on the capsule did change my penetration with the floor though, I'm a bit higher (0.905 instead of 0.835). However, it did not change anything when colliding with the walls. How can I make the collisions against the walls less jittery? Edit, the day after: After more investigation, it appears that dynamic objects behave well. My problem comes from the btKinematicCharacterController that I use for moving my character; that stuff is totally bugged, according to the whole Internet :/.

  Read the article

• SOA Summit - Oracle Session Replay

  - by Bruce Tierney

  If you think you missed the most recent Integration Developer News (IDN) "SOA Summit" 2013...good news, you didn't.  At least not the replay of the Oracle session titled: Three Solutionsfor Simplifying Cloud/On-Premises Integration As you will see in the reply below, this session introduces Three common reasons for integration complexity: Disparate Toolkits Lack of API Management Rigid, Brittle Infrastructure and then the Three solutions to these challenges: Unify Cloud On-premises Integration Enable Multi-channel Development with API Management Plan for the Unexpected - Future Readiness The last solution on future readiness describes how you can transition from being reactive to new trends, such as the Internet of Things (IoT), by modifying your integration strategy to enable business agility and how to recognize trends through Fast Data event processing ahead of your competition. Oracle SOA Suite customer SFpark's (San Francisco Metropolitan Transit Authority) implementation with API Management is covered as shown in the screenshot to the right This case study covers the core areas of API Management for partners to build their own applications by leveraging parking availability and real-time pricing as well as mobile enablement of data integrated by SOA Suite underneath.  Download the free SFpark app from the Apple and Android app stores to check it out. When looking into the future, the discussion starts with a historical look to better prepare for what comes next.   As shown in the image below, one of the next frontiers after mobile and cloud integration is a deeper level of direct "enterprise to customer" interaction.  Much of this relates to the Internet of Things.  Examples of IoT from the perspective of SOA and integration is also covered in the session. For example, early adopter Turkcell and their tracking of mobile phone users as they move from point A to B to C is shown in the image the right.   As you look into more "smart services" such as Location-Based Services, how "future ready" is your application infrastructure?  . . . Check out the replay by clicking the video image below to learn about these three challenges and solution including how to "future ready" your application infrastructure:

  Read the article

• Unable to ping inside or outside network with default gateway 0.0.0.0

  - by agentroadkill

  I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

  Read the article

• Fixing a NoClassDefFoundError

  - by Chris Okyen

  I have some code: package ftc; import java.util.Scanner; public class Fer_To_Cel { public static void main(String[] argv) { // Scanner object to get the temp in degrees Farenheit Scanner keyboard = new Scanner(System.in); boolean isInt = true; // temporarily put as true in case the user enters a valid int the first time int degreesF = 0; // initialy set to 0 do { try { // Input the temperature text. System.out.print("\nPlease enter a temperature (integer number, no fractional part) in degrees Farenheit: "); degreesF = Integer.parseInt(keyboard.next()); // Get user input and Assign the far. temperature variable, which is casted from String to int. } // Let the user know in a user friendly notice that the value entered wasnt an int ( give int value range ) , and then give error log catch(java.lang.Exception e) { System.out.println("Sorry but you entered a non-int value ( needs to be between ( including ) -2,147,483,648 and 2,147,483,647 ).. \n"); e.printStackTrace(); isInt = false; } } while(!isInt); System.out.println(""); // print a new line. final int degreesC = (5*(degreesF-32)/9); // convert the degrees from F to C and store the resulting expression in degreesC // Print out a newline, then print what X degrees F is in Celcius. System.out.println("\n" + degreesF + " degrees Farenheit is " + degreesC + " degrees Celcius"); } } And The following error: C:\Program Files\Java\jdk1.7.0_06\bin>java Fer_To_Cel Exception in thread "main" java.lang.NoClassDefFoundError: Fer_To_Cel (wrong name: ftc/Fer_To_Cel) at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:791) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:14 at java.net.URLClassLoader.defineClass(URLClassLoader.java:449) at java.net.URLClassLoader.access$100(URLClassLoader.java:71) at java.net.URLClassLoader$1.run(URLClassLoader.java:361) at java.net.URLClassLoader$1.run(URLClassLoader.java:355) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:354) at java.lang.ClassLoader.loadClass(ClassLoader.java:423) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:356) at sun.launcher.LauncherHelper.checkAndLoadMain(LauncherHelper.java:480) The code compiled without compile errors, but presented errors during execution. Which leads me to two questions. I know Errors can be termed Compiler, Runtime and Logic Errors, but the NoClassDefFoundError inherits java.lang.LinkageError. Does that make it a Linker error, being niether of the three types of errors I listed, If I am right this is the answer. For someone else who obtains the singular .java file and compiles it, would this be the only way to solve this problem? Or can I (should I ) do/have done something to fix this problem? Basically, based on a basis of programming, is this a fault of me as the writer? Could this be done once on, my half and be distributed and not needed be done again?

  Read the article

• Eloqua Sales Awareness Training for Partners - London, November 28-29

  - by Richard Lefebvre

  We are pleased to invite you to the free of charge Oracle Eloqua Sales Awareness Training for Partners - London, November 28&29 - COME LEARN WHAT ALL THE BUZZ IS ABOUT! WHEN SALES & MARKETING BOND, REVENUE GROWS It’s not one thing that makes a company successful with marketing automation – it’s the combination of the best implementation, flexible long-term support and access to a community of marketing innovation that ensures you have the assistance you need every step of the way. Our customers choose Oracle|Eloqua because they know when sales and marketing work together, leads are called upon, quotas are crushed and revenues climb. Learn how Oracle|Eloqua can help you put marketing to work for you! COVERED IN THIS TRAINING Eloqua and the Customer Experience Strategy How Modern Marketing Works Introduction to Eloqua – Whiteboard POV Go To Market Playbook Competitive Landscape Integration Options Service Offerings With case studies, workshops and product demos to help you on your way to a new world of marketing expertise LOGISTICS If you are ready to join us on this journey, now’s the time to let us know! Tell us a little about your experience – complete this form to help us know you better (Please ignore if your firm has already completed) Complete this form to RSVP by Thursday, November 21, 2013. Find out more about the Oracle|Eloqua, join the Oracle Eloqua Marketing Cloud Service Knowledge Zone and keep up on all the news! QUESTIONS? Contact [email protected] Please note that similar events will take place in other cities (Brussels, Istanbul and more come) later in 2014. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

  Read the article

• Can a 10-bit monitor connection preserve all tones in 8-bit sRGB gradients on a wide-gamut monitor?

  - by hjb981

  This question is about color management and the use of a higher color depth, 10 bits per channel (30 bits in total, resulting in 1.07 billion colors, or 1024 shades of gray, sometimes referred to as "deep color") compared to the standard of 8 bits per channel (24 bits in total, 16.7 million colors, 256 shades of gray, sometimes referred to as "true color"). Do not confuse with "32 bit color", which usually refers to standard 8 bit color with an extra channel ("alpha channel") for transparency (used to achieve effects like semi-transparent windows etc). The following can be assumed to be in place: 1: A wide-gamut monitor that supports 10-bit input. Further, it can be assumed that the monitor has been calibrated to its native gamut and that an ICC color profile has been created. 2: A graphics card that supports 10-bit output (and is connected to the monitor via DisplayPort). 3: Drivers for the graphics card that support 10-bit output. If applications that support 10-bit output and color profiles would be used, I would expect them to display images that were saved using different color spaces correctly. For example, both an sRGB and an adobeRGB image should be displayed correctly. If an sRGB image was saved using 8 bits per channel (almost always the case), then the 10-bit signal path would ensure that no tonal gradients were lost in the conversion from the sRGB of the image to the native color space of the monitor. For example: If the image contains a pixel that is pure red in 8 bits (255,0,0), the corresponding value in 10 bits would be (1023,0,0). However, since the monitor has a larger color space than sRGB, sending the signal (1023,0,0) to the monitor would result in a red that was too saturated. Therefore, according to the ICC color profile, the signal would be transformed into a different value with less red saturation, for example (987,0,0). Since there are still plenty of levels left between 0 and 987, all 256 values (0-255) for red in the sRGB color space of the file could be uniquely mapped to color-corrected 10-bit values in the monitor's native color space. However, if the conversion was done in 8 bits, (255,0,0) would be translated to (246,0,0), and there would now only be 247 available levels for the red channel instead of 256, degrading the displayed image quality. My question is: how does this work on Ubuntu? Let's say that I use Firefox (which is color-aware and uses ICC color profiles). Would I get 10-bit processing, thus preserving all levels of an 8-bit picture? What is the situation like for other applications, especially photo applications like Shotwell, Rawtherapee, Darktable, RawStudio, Photivo etc? Does Ubuntu differ from other operating systems (Linux and others) on this point?

  Read the article

< Previous Page | 693 694 695 696 697 698 699 700 701 702 703 704  | Next Page >