Search Results

Search found 2129 results on 86 pages for 'flag'.

Page 7/86 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• on Red Hat Enterprise and CentOS, what is creating /var/run/reboot-required?

  - by EdwardTeach

  On CentOS 5.8+ and Red Hat Enterprise 6+, when installing/updating packages, I notice a flag file /var/run/reboot-required is created when appropriate. On Ubuntu (and Debian too, I'm guessing), if package "update-notifier-common" is installed, a package postinst script triggers creation of this flag file. On RHEL/CentOS I can't figure out how this is happening. For instance, on RHEL and CentOS I recently installed several updates and /var/run/reboot-required was created. One of them was an "openssl" package upgrade. I assume this was what created the flag file, since on Ubuntu it also works this way. However I looked at all "rpm -q --scripts" for each updated package, and didn't see anything that was likely to have created that flag file. Mostly I saw "postinstall program: /sbin/ldconfig". So my questions are: What creates this flag file on RHEL/CentOS? Does it require a special package to be installed, analogous to the "update-notifier-common" package on Ubuntu?

  Read the article

• iOS - UISlider - How to make a slider to auto-move [closed]

  - by drodri420

  its me again. Coming back with another noobish question: This time its , can you make a UISlider move by itself??? I've implemented this on the .m ///This right here makes a slider move 1point from 1 to 100, once it reaches 100 it goes backwards and so on... - (IBAction)moveSlider:(UISlider *)sender { int flag=0, counter=1; while(flag == 0) { counter = counter + (.25 * round); if(counter == 100) { flag = 1; } if(counter < 100 && counter > 1) { slider.value = counter; } } while(flag == 1) { counter = counter - (.25 * round); if(counter == 1) { flag = 0; } if(counter < 100 && counter > 1) { slider.value = counter; } } } And Implemented this on another action: -(void)startNewRound { round+=1; targetValue = 1 + (arc4random() % 100); self.slider.value = currentValue; [self moveSlider:slider]; } I think I lost it along the way and Im just typing pure nonsense but If anyone could point me in the right direction on to which is it that Im doing wrong??

  Read the article

• Raycasting with tags problems in unity3d

  - by user1855858

  i need some help here. i have a part of code to search unblocked neighbour with raycast. i need to get raycast that just collide with "WP" tag. both of the iteration shown a right results, so do the dump and the raycast, the raycast does success to collide something, but when i check what the raycast collided with, there is no result shown.... anyone knows whats wrong with this code..?? int flag = 0, flahNeigh = 0; for(flag = 0; flag< wayPoints.WPList.Length; flag++) // iteration to seek neighbour nodes { for (flagNeigh = 0; flagNeigh < wayPoints.WPList.Length; flagNeigh++) { if (wayPoints.WPList[flag].loc != wayPoints.WPList[flagNeigh].loc) // dump its own node location { if (Physics.Raycast(wayPoints.WPList[flag].loc.position, wayPoints.WPList[flagNeigh].loc.position, out hitted)) // raycasting to each node else its self { if (hitted.collider.gameObject.CompareTag("WP")) // check if the ray only collide the node { print(flag + " : " + flagNeigh + " : " + wayPoints.WPList[flagNeigh].loc.position); // debugging to see whether the code works or not (the error comes) } } } } } thanks for the appreciation and answers... sorry if i have a bad english...^^

  Read the article

• Is this a correct way to stop Execution Task

  - by Yan Cheng CHEOK

  I came across code to stop execution's task. private final ExecutorService executor = Executors.newSingleThreadExecutor(); public void stop() { executor.shutdownNow(); try { executor.awaitTermination(100, TimeUnit.DAYS); } catch (InterruptedException ex) { log.error(null, ex); } } public Runnable getRunnable() { return new Runnable() { public void run() { while (!Thread.currentThread().isInterrupted()) { // What if inside fun(), someone try to clear the interrupt flag? // Say, through Thread.interrupted(). We will stuck in this loop // forever. fun(); } } }; } I realize that, it is possible for Runnable to be in forever loop, as Unknown fun may Thread.sleep, clear the interrupt flag and ignore the InterruptedException Unknown fun may Thread.interrupted, clear the interrupt flag. I was wondering, is the following way correct way to fix the code? private final ExecutorService executor = Executors.newSingleThreadExecutor(); private volatile boolean flag = true; public void stop() { flag = false; executor.shutdownNow(); try { executor.awaitTermination(100, TimeUnit.DAYS); } catch (InterruptedException ex) { log.error(null, ex); } } public Runnable getRunnable() { return new Runnable() { public void run() { while (flag && !Thread.currentThread().isInterrupted()) { // What if inside fun(), someone try to clear the interrupt flag? // Say, through Thread.interrupted(). We will stuck in this loop // forever. fun(); } } }; }

  Read the article

• System.Threading.Timer won't trigger

  - by mijatovic

  Hello guys, I am new here... I have one question, if somebody can help me. It is about timers (System.Threading.Timer). I want to break inevitable recursion: I have two columns in datarow and they are mutually dependant (price_without_VAT and price_with_VAT). Setting one of them will definitely cause StackOverflowException. So here's the idea: bool flag = true; void Reset(object state) { flag = true; } Now, wrap the method for changing value of one of the columns: { if(flag) { flag = false; System.Threading.Timer tmr = new System.Threading.Timer(new System.Threading.TimerCallback(Reset), null, 10, System.Threading.Timeout.Infinite); datarow.other_column = value; } } datarow.other_column.value line will immediately trigger the above method, but there will be no recursion because flag is false. In 10 ms flag should be back to true, and everything is back to normal. Now, when i follow the code in DEBUGGER, everything works fine, but when I start app NORMALLY Reset function simply will not trigger, flag is stuck to false forever and everything false apart. I play around with due_time parameter but nothing seems to help. Any ideas?

  Read the article

• iPhone memory management

  - by Prazi

  I am newbie to iPhone programming. I am not using Interface Builder in my programming. I have some doubt about memory management, @property topics in iPhone. Consider the following code @interface LoadFlag : UIViewController { UIImage *flag; UIImageView *preview; } @property (nonatomic, retain) UIImageView *preview; @property (nonatomic, retain) UIImage *flag; @implementation @synthesize preview; @synthesize flag; - (void)viewDidLoad { flag = [UIImage imageNamed:@"myImage.png"]]; NSLog(@"Preview: %d\n",[preview retainCount]); //Count: 0 but shouldn't it be 1 as I am retaining it in @property in interface file preview=[[UIImageView alloc]init]; NSLog(@"Count: %d\n",[preview retainCount]); //Count: 1 preview.frame=CGRectMake(0.0f, 0.0f, 100.0f, 100.0f); preview.image = flag; [self.view addSubview:preview]; NSLog(@"Count: %d\n",[preview retainCount]); //Count: 2 [preview release]; NSLog(@"Count: %d\n",[preview retainCount]); //Count: 1 } When & Why(what is the need) do I have to set @property with retain (in above case for UIImage & UIImageView) ? I saw this statement in many sample programs but didn't understood the need of it. When I declare @property (nonatomic, retain) UIImageView *preview; statement the retain Count is 0. Why doesn't it increase by 1 inspite of retaining it in @property. Also when I declare [self.view addSubview:preview]; then retain Count increments by 1 again. In this case does the "Autorelease pool" releases for us later or we have to take care of releasing it. I am not sure but I think that the Autorelease should handle it as we didn't explicitly retained it so why should we worry of releasing it. Now, after the [preview release]; statement my count is 1. Now I don't need UIImageView anymore in my program so when and where should I release it so that the count becomes 0 and the memory gets deallocated. Again, I am not sure but I think that the Autorelease should handle it as we didn't explicitly retained it so why should we worry of releasing it. What will happen if I release it in -(void) dealloc method In the statement - flag = [UIImage imageNamed:@"myImage.png"]]; I haven't allocated any memory to flag but how can I still use it in my program. In this case if I do not allocate memory then who allocates & deallocates memory to it or is the "flag" just a reference pointing to - [UIImage imageNamed:@"myImage.png"]];. If it is a reference only then do i need to release it. Thanks in advance.

  Read the article

• Global Variable problem

  - by riteshkumar1905

  Hi, I am new in iphone.I use a flag variable to play songs in avAudio player all songs are properly handeled with flag variable.we have two tabs in tab bar , i want that if any song playing then on other tab song info show.If we use that flag variable then i syncronize song info with song.But i can't access the value of flag on song info tab.I import the global file in song info file. Please Help me any one through which i define a global integer that var i can access in all project.

  Read the article

• Ancillary Objects: Separate Debug ELF Files For Solaris

  - by Ali Bahrami

  We introduced a new object ELF object type in Solaris 11 Update 1 called the Ancillary Object. This posting describes them, using material originally written during their development, the PSARC arc case, and the Solaris Linker and Libraries Manual. ELF objects contain allocable sections, which are mapped into memory at runtime, and non-allocable sections, which are present in the file for use by debuggers and observability tools, but which are not mapped or used at runtime. Typically, all of these sections exist within a single object file. Ancillary objects allow them to instead go into a separate file. There are different reasons given for wanting such a feature. One can debate whether the added complexity is worth the benefit, and in most cases it is not. However, one important case stands out — customers with very large 32-bit objects who are not ready or able to make the transition to 64-bits. We have customers who build extremely large 32-bit objects. Historically, the debug sections in these objects have used the stabs format, which is limited, but relatively compact. In recent years, the industry has transitioned to the powerful but verbose DWARF standard. In some cases, the size of these debug sections is large enough to push the total object file size past the fundamental 4GB limit for 32-bit ELF object files. The best, and ultimately only, solution to overly large objects is to transition to 64-bits. However, consider environments where: Hundreds of users may be executing the code on large shared systems. (32-bits use less memory and bus bandwidth, and on sparc runs just as fast as 64-bit code otherwise). Complex finely tuned code, where the original authors may no longer be available. Critical production code, that was expensive to qualify and bring online, and which is otherwise serving its intended purpose without issue. Users in these risk adverse and/or high scale categories have good reasons to push 32-bits objects to the limit before moving on. Ancillary objects offer these users a longer runway. Design The design of ancillary objects is intended to be simple, both to help human understanding when examining elfdump output, and to lower the bar for debuggers such as dbx to support them. The primary and ancillary objects have the same set of section headers, with the same names, in the same order (i.e. each section has the same index in both files). A single added section of type SHT_SUNW_ANCILLARY is added to both objects, containing information that allows a debugger to identify and validate both files relative to each other. Given one of these files, the ancillary section allows you to identify the other. Allocable sections go in the primary object, and non-allocable ones go into the ancillary object. A small set of non-allocable objects, notably the symbol table, are copied into both objects. As noted above, most sections are only written to one of the two objects, but both objects have the same section header array. The section header in the file that does not contain the section data is tagged with the SHF_SUNW_ABSENT section header flag to indicate its placeholder status. Compiler writers and others who produce objects can set the SUNW_SHF_PRIMARY section header flag to mark non-allocable sections that should go to the primary object rather than the ancillary. If you don't request an ancillary object, the Solaris ELF format is unchanged. Users who don't use ancillary objects do not pay for the feature. This is important, because they exist to serve a small subset of our users, and must not complicate the common case. If you do request an ancillary object, the runtime behavior of the primary object will be the same as that of a normal object. There is no added runtime cost. The primary and ancillary object together represent a logical single object. This is facilitated by the use of a single set of section headers. One can easily imagine a tool that can merge a primary and ancillary object into a single file, or the reverse. (Note that although this is an interesting intellectual exercise, we don't actually supply such a tool because there's little practical benefit above and beyond using ld to create the files). Among the benefits of this approach are: There is no need for per-file symbol tables to reflect the contents of each file. The same symbol table that would be produced for a standard object can be used. The section contents are identical in either case — there is no need to alter data to accommodate multiple files. It is very easy for a debugger to adapt to these new files, and the processing involved can be encapsulated in input/output routines. Most of the existing debugger implementation applies without modification. The limit of a 4GB 32-bit output object is now raised to 4GB of code, and 4GB of debug data. There is also the future possibility (not currently supported) to support multiple ancillary objects, each of which could contain up to 4GB of additional debug data. It must be noted however that the 32-bit DWARF debug format is itself inherently 32-bit limited, as it uses 32-bit offsets between debug sections, so the ability to employ multiple ancillary object files may not turn out to be useful. Using Ancillary Objects (From the Solaris Linker and Libraries Guide) By default, objects contain both allocable and non-allocable sections. Allocable sections are the sections that contain executable code and the data needed by that code at runtime. Non-allocable sections contain supplemental information that is not required to execute an object at runtime. These sections support the operation of debuggers and other observability tools. The non-allocable sections in an object are not loaded into memory at runtime by the operating system, and so, they have no impact on memory use or other aspects of runtime performance no matter their size. For convenience, both allocable and non-allocable sections are normally maintained in the same file. However, there are situations in which it can be useful to separate these sections. To reduce the size of objects in order to improve the speed at which they can be copied across wide area networks. To support fine grained debugging of highly optimized code requires considerable debug data. In modern systems, the debugging data can easily be larger than the code it describes. The size of a 32-bit object is limited to 4 Gbytes. In very large 32-bit objects, the debug data can cause this limit to be exceeded and prevent the creation of the object. To limit the exposure of internal implementation details. Traditionally, objects have been stripped of non-allocable sections in order to address these issues. Stripping is effective, but destroys data that might be needed later. The Solaris link-editor can instead write non-allocable sections to an ancillary object. This feature is enabled with the -z ancillary command line option. $ ld ... -z ancillary[=outfile] ...By default, the ancillary file is given the same name as the primary output object, with a .anc file extension. However, a different name can be provided by providing an outfile value to the -z ancillary option. When -z ancillary is specified, the link-editor performs the following actions. All allocable sections are written to the primary object. In addition, all non-allocable sections containing one or more input sections that have the SHF_SUNW_PRIMARY section header flag set are written to the primary object. All remaining non-allocable sections are written to the ancillary object. The following non-allocable sections are written to both the primary object and ancillary object. .shstrtab The section name string table. .symtab The full non-dynamic symbol table. .symtab_shndx The symbol table extended index section associated with .symtab. .strtab The non-dynamic string table associated with .symtab. .SUNW_ancillary Contains the information required to identify the primary and ancillary objects, and to identify the object being examined. The primary object and all ancillary objects contain the same array of sections headers. Each section has the same section index in every file. Although the primary and ancillary objects all define the same section headers, the data for most sections will be written to a single file as described above. If the data for a section is not present in a given file, the SHF_SUNW_ABSENT section header flag is set, and the sh_size field is 0. This organization makes it possible to acquire a full list of section headers, a complete symbol table, and a complete list of the primary and ancillary objects from either of the primary or ancillary objects. The following example illustrates the underlying implementation of ancillary objects. An ancillary object is created by adding the -z ancillary command line option to an otherwise normal compilation. The file utility shows that the result is an executable named a.out, and an associated ancillary object named a.out.anc. $ cat hello.c #include <stdio.h> int main(int argc, char **argv) { (void) printf("hello, world\n"); return (0); } $ cc -g -zancillary hello.c $ file a.out a.out.anc a.out: ELF 32-bit LSB executable 80386 Version 1 [FPU], dynamically linked, not stripped, ancillary object a.out.anc a.out.anc: ELF 32-bit LSB ancillary 80386 Version 1, primary object a.out $ ./a.out hello worldThe resulting primary object is an ordinary executable that can be executed in the usual manner. It is no different at runtime than an executable built without the use of ancillary objects, and then stripped of non-allocable content using the strip or mcs commands. As previously described, the primary object and ancillary objects contain the same section headers. To see how this works, it is helpful to use the elfdump utility to display these section headers and compare them. The following table shows the section header information for a selection of headers from the previous link-edit example. Index Section Name Type Primary Flags Ancillary Flags Primary Size Ancillary Size 13 .text PROGBITS ALLOC EXECINSTR ALLOC EXECINSTR SUNW_ABSENT 0x131 0 20 .data PROGBITS WRITE ALLOC WRITE ALLOC SUNW_ABSENT 0x4c 0 21 .symtab SYMTAB 0 0 0x450 0x450 22 .strtab STRTAB STRINGS STRINGS 0x1ad 0x1ad 24 .debug_info PROGBITS SUNW_ABSENT 0 0 0x1a7 28 .shstrtab STRTAB STRINGS STRINGS 0x118 0x118 29 .SUNW_ancillary SUNW_ancillary 0 0 0x30 0x30 The data for most sections is only present in one of the two files, and absent from the other file. The SHF_SUNW_ABSENT section header flag is set when the data is absent. The data for allocable sections needed at runtime are found in the primary object. The data for non-allocable sections used for debugging but not needed at runtime are placed in the ancillary file. A small set of non-allocable sections are fully present in both files. These are the .SUNW_ancillary section used to relate the primary and ancillary objects together, the section name string table .shstrtab, as well as the symbol table.symtab, and its associated string table .strtab. It is possible to strip the symbol table from the primary object. A debugger that encounters an object without a symbol table can use the .SUNW_ancillary section to locate the ancillary object, and access the symbol contained within. The primary object, and all associated ancillary objects, contain a .SUNW_ancillary section that allows all the objects to be identified and related together. $ elfdump -T SUNW_ancillary a.out a.out.anc a.out: Ancillary Section: .SUNW_ancillary index tag value [0] ANC_SUNW_CHECKSUM 0x8724 [1] ANC_SUNW_MEMBER 0x1 a.out [2] ANC_SUNW_CHECKSUM 0x8724 [3] ANC_SUNW_MEMBER 0x1a3 a.out.anc [4] ANC_SUNW_CHECKSUM 0xfbe2 [5] ANC_SUNW_NULL 0 a.out.anc: Ancillary Section: .SUNW_ancillary index tag value [0] ANC_SUNW_CHECKSUM 0xfbe2 [1] ANC_SUNW_MEMBER 0x1 a.out [2] ANC_SUNW_CHECKSUM 0x8724 [3] ANC_SUNW_MEMBER 0x1a3 a.out.anc [4] ANC_SUNW_CHECKSUM 0xfbe2 [5] ANC_SUNW_NULL 0 The ancillary sections for both objects contain the same number of elements, and are identical except for the first element. Each object, starting with the primary object, is introduced with a MEMBER element that gives the file name, followed by a CHECKSUM that identifies the object. In this example, the primary object is a.out, and has a checksum of 0x8724. The ancillary object is a.out.anc, and has a checksum of 0xfbe2. The first element in a .SUNW_ancillary section, preceding the MEMBER element for the primary object, is always a CHECKSUM element, containing the checksum for the file being examined. The presence of a .SUNW_ancillary section in an object indicates that the object has associated ancillary objects. The names of the primary and all associated ancillary objects can be obtained from the ancillary section from any one of the files. It is possible to determine which file is being examined from the larger set of files by comparing the first checksum value to the checksum of each member that follows. Debugger Access and Use of Ancillary Objects Debuggers and other observability tools must merge the information found in the primary and ancillary object files in order to build a complete view of the object. This is equivalent to processing the information from a single file. This merging is simplified by the primary object and ancillary objects containing the same section headers, and a single symbol table. The following steps can be used by a debugger to assemble the information contained in these files. Starting with the primary object, or any of the ancillary objects, locate the .SUNW_ancillary section. The presence of this section identifies the object as part of an ancillary group, contains information that can be used to obtain a complete list of the files and determine which of those files is the one currently being examined. Create a section header array in memory, using the section header array from the object being examined as an initial template. Open and read each file identified by the .SUNW_ancillary section in turn. For each file, fill in the in-memory section header array with the information for each section that does not have the SHF_SUNW_ABSENT flag set. The result will be a complete in-memory copy of the section headers with pointers to the data for all sections. Once this information has been acquired, the debugger can proceed as it would in the single file case, to access and control the running program. Note - The ELF definition of ancillary objects provides for a single primary object, and an arbitrary number of ancillary objects. At this time, the Oracle Solaris link-editor only produces a single ancillary object containing all non-allocable sections. This may change in the future. Debuggers and other observability tools should be written to handle the general case of multiple ancillary objects. ELF Implementation Details (From the Solaris Linker and Libraries Guide) To implement ancillary objects, it was necessary to extend the ELF format to add a new object type (ET_SUNW_ANCILLARY), a new section type (SHT_SUNW_ANCILLARY), and 2 new section header flags (SHF_SUNW_ABSENT, SHF_SUNW_PRIMARY). In this section, I will detail these changes, in the form of diffs to the Solaris Linker and Libraries manual. Part IV ELF Application Binary Interface Chapter 13: Object File Format Object File Format Edit Note: This existing section at the beginning of the chapter describes the ELF header. There's a table of object file types, which now includes the new ET_SUNW_ANCILLARY type. e_type Identifies the object file type, as listed in the following table. NameValueMeaning ET_NONE0No file type ET_REL1Relocatable file ET_EXEC2Executable file ET_DYN3Shared object file ET_CORE4Core file ET_LOSUNW0xfefeStart operating system specific range ET_SUNW_ANCILLARY0xfefeAncillary object file ET_HISUNW0xfefdEnd operating system specific range ET_LOPROC0xff00Start processor-specific range ET_HIPROC0xffffEnd processor-specific range Sections Edit Note: This overview section defines the section header structure, and provides a high level description of known sections. It was updated to define the new SHF_SUNW_ABSENT and SHF_SUNW_PRIMARY flags and the new SHT_SUNW_ANCILLARY section. ... sh_type Categorizes the section's contents and semantics. Section types and their descriptions are listed in Table 13-5. sh_flags Sections support 1-bit flags that describe miscellaneous attributes. Flag definitions are listed in Table 13-8. ... Table 13-5 ELF Section Types, sh_type NameValue . . . SHT_LOSUNW0x6fffffee SHT_SUNW_ancillary0x6fffffee . . . ... SHT_LOSUNW - SHT_HISUNW Values in this inclusive range are reserved for Oracle Solaris OS semantics. SHT_SUNW_ANCILLARY Present when a given object is part of a group of ancillary objects. Contains information required to identify all the files that make up the group. See Ancillary Section. ... Table 13-8 ELF Section Attribute Flags NameValue . . . SHF_MASKOS0x0ff00000 SHF_SUNW_NODISCARD0x00100000 SHF_SUNW_ABSENT0x00200000 SHF_SUNW_PRIMARY0x00400000 SHF_MASKPROC0xf0000000 . . . ... SHF_SUNW_ABSENT Indicates that the data for this section is not present in this file. When ancillary objects are created, the primary object and any ancillary objects, will all have the same section header array, to facilitate merging them to form a complete view of the object, and to allow them to use the same symbol tables. Each file contains a subset of the section data. The data for allocable sections is written to the primary object while the data for non-allocable sections is written to an ancillary file. The SHF_SUNW_ABSENT flag is used to indicate that the data for the section is not present in the object being examined. When the SHF_SUNW_ABSENT flag is set, the sh_size field of the section header must be 0. An application encountering an SHF_SUNW_ABSENT section can choose to ignore the section, or to search for the section data within one of the related ancillary files. SHF_SUNW_PRIMARY The default behavior when ancillary objects are created is to write all allocable sections to the primary object and all non-allocable sections to the ancillary objects. The SHF_SUNW_PRIMARY flag overrides this behavior. Any output section containing one more input section with the SHF_SUNW_PRIMARY flag set is written to the primary object without regard for its allocable status. ... Two members in the section header, sh_link, and sh_info, hold special information, depending on section type. Table 13-9 ELF sh_link and sh_info Interpretation sh_typesh_linksh_info . . . SHT_SUNW_ANCILLARY The section header index of the associated string table. 0 . . . Special Sections Edit Note: This section describes the sections used in Solaris ELF objects, using the types defined in the previous description of section types. It was updated to define the new .SUNW_ancillary (SHT_SUNW_ANCILLARY) section. Various sections hold program and control information. Sections in the following table are used by the system and have the indicated types and attributes. Table 13-10 ELF Special Sections NameTypeAttribute . . . .SUNW_ancillarySHT_SUNW_ancillaryNone . . . ... .SUNW_ancillary Present when a given object is part of a group of ancillary objects. Contains information required to identify all the files that make up the group. See Ancillary Section for details. ... Ancillary Section Edit Note: This new section provides the format reference describing the layout of a .SUNW_ancillary section and the meaning of the various tags. Note that these sections use the same tag/value concept used for dynamic and capabilities sections, and will be familiar to anyone used to working with ELF. In addition to the primary output object, the Solaris link-editor can produce one or more ancillary objects. Ancillary objects contain non-allocable sections that would normally be written to the primary object. When ancillary objects are produced, the primary object and all of the associated ancillary objects contain a SHT_SUNW_ancillary section, containing information that identifies these related objects. Given any one object from such a group, the ancillary section provides the information needed to identify and interpret the others. This section contains an array of the following structures. See sys/elf.h. typedef struct { Elf32_Word a_tag; union { Elf32_Word a_val; Elf32_Addr a_ptr; } a_un; } Elf32_Ancillary; typedef struct { Elf64_Xword a_tag; union { Elf64_Xword a_val; Elf64_Addr a_ptr; } a_un; } Elf64_Ancillary; For each object with this type, a_tag controls the interpretation of a_un. a_val These objects represent integer values with various interpretations. a_ptr These objects represent file offsets or addresses. The following ancillary tags exist. Table 13-NEW1 ELF Ancillary Array Tags NameValuea_un ANC_SUNW_NULL0Ignored ANC_SUNW_CHECKSUM1a_val ANC_SUNW_MEMBER2a_ptr ANC_SUNW_NULL Marks the end of the ancillary section. ANC_SUNW_CHECKSUM Provides the checksum for a file in the c_val element. When ANC_SUNW_CHECKSUM precedes the first instance of ANC_SUNW_MEMBER, it provides the checksum for the object from which the ancillary section is being read. When it follows an ANC_SUNW_MEMBER tag, it provides the checksum for that member. ANC_SUNW_MEMBER Specifies an object name. The a_ptr element contains the string table offset of a null-terminated string, that provides the file name. An ancillary section must always contain an ANC_SUNW_CHECKSUM before the first instance of ANC_SUNW_MEMBER, identifying the current object. Following that, there should be an ANC_SUNW_MEMBER for each object that makes up the complete set of objects. Each ANC_SUNW_MEMBER should be followed by an ANC_SUNW_CHECKSUM for that object. A typical ancillary section will therefore be structured as: TagMeaning ANC_SUNW_CHECKSUMChecksum of this object ANC_SUNW_MEMBERName of object #1 ANC_SUNW_CHECKSUMChecksum for object #1 . . . ANC_SUNW_MEMBERName of object N ANC_SUNW_CHECKSUMChecksum for object N ANC_SUNW_NULL An object can therefore identify itself by comparing the initial ANC_SUNW_CHECKSUM to each of the ones that follow, until it finds a match. Related Other Work The GNU developers have also encountered the need/desire to support separate debug information files, and use the solution detailed at http://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html. At the current time, the separate debug file is constructed by building the standard object first, and then copying the debug data out of it in a separate post processing step, Hence, it is limited to a total of 4GB of code and debug data, just as a single object file would be. They are aware of this, and I have seen online comments indicating that they may add direct support for generating these separate files to their link-editor. It is worth noting that the GNU objcopy utility is available on Solaris, and that the Studio dbx debugger is able to use these GNU style separate debug files even on Solaris. Although this is interesting in terms giving Linux users a familiar environment on Solaris, the 4GB limit means it is not an answer to the problem of very large 32-bit objects. We have also encountered issues with objcopy not understanding Solaris-specific ELF sections, when using this approach. The GNU community also has a current effort to adapt their DWARF debug sections in order to move them to separate files before passing the relocatable objects to the linker. The details of Project Fission can be found at http://gcc.gnu.org/wiki/DebugFission. The goal of this project appears to be to reduce the amount of data seen by the link-editor. The primary effort revolves around moving DWARF data to separate .dwo files so that the link-editor never encounters them. The details of modifying the DWARF data to be usable in this form are involved — please see the above URL for details.

  Read the article

• How do I automatically reset a boolean when any method other is called in C#?

  - by gtaborga

  Hey everyone, Using C#, I need to do some extra work if function A() was called right before function C(). If any other function was called in between A() and C() then I don't want to do that extra work. Any ideas that would require the least amount of code duplication? I'm trying to avoid adding lines like "flag = false;" into every function B1..BN. Here is a very basic example: bool flag = false; void A() { flag = true; } void B1() { ... } void B2() { ... } void C() { if (flag) { //do something } } The above example was just using a simple case but I'm open to using something other than booleans. The important thing is that I want to be able to set and reset a flag of sorts so that C() knows how to behave accordingly. Thank you for your help. If you require clarification I will edit my post.

  Read the article

• Python regex to parse text file, get the items in list and count the list

  - by Nemo

  I have a text file which contains some data. I m particularly interested in finding the count of the number of items in v_dims v_dims pattern in my text file looks like this : v_dims={ "Sales", "Product Family", "Sales Organization", "Region", "Sales Area", "Sales office", "Sales Division", "Sales Person", "Sales Channel", "Sales Order Type", "Sales Number", "Sales Person", "Sales Quantity", "Sales Amount" } So I m thinking of getting all the elements in v_dims and dumping them out in a Python list. Then compute the len(mylist) to get the count of the items. The challenge is in getting all the elements of v_dims from my text file and putting them in an empty list. I m particularly interested in items in v_dims in my text file. The text file has data in the form of v_dims pattern i showed in my original post. Some data has nested patterns of v_dims. Thanks. Here's what I have tried and failed. Any help is appreciated. TIA. import re fname = "C:\Users\XXXX\Test.mrk" with open(fname, "r") as fo: content_as_string = fo.read() match = re.findall(r'v_dims={\"(.+?)\"}',content_as_string) Though I have a big text file, Here's a snippet of what's the structure of my text file version "1"; // Computer generated object language file object 'MRKR' "Main" { Data_Type=2, HeaderBlock={ Version_String="6.3 (25)" }, Printer_Info={ Orientation=0, Page_Width=8.50000000, Page_Height=11.00000000, Page_Header="", Page_Footer="", Margin_type=0, Top_Margin=0.50000000, Left_Margin=0.50000000, Bottom_Margin=0.50000000, Right_Margin=0.50000000 }, Marker_Options={ Close_All="TRUE", Hide_Console="FALSE", Console_Left="FALSE", Console_Width=217, Main_Style="Maximized", MDI_Rect={ 0, 0, 892, 1063 } }, Dives={ { Dive="A", Windows={ { View_Index=0, Window_Info={ Window_Rect={ 0, -288, 400, 1008 }, Window_Style="Maximized Front", Window_Name="Theater [Previous Qtr Diveplan-Dive A]" }, Dependent_bool="FALSE", Colset={ Dive_Type="Normal", Dimension_Name="Theater", Action_List={ Actions={ { Action_Type="Select", select_type=5 }, { Action_Type="Select", select_type=0, Key_Names={ "Theater" }, Key_Indexes={ { "AMERICAS" } } }, { Action_Type="Focus", Focus_Rows="True" }, { Action_Type="Dimensions", v_dims={ "Theater", "Product Family", "Division", "Region", "Install at Country Name", "Connect Home Type", "Connect In Type", "SymmConnect Enabled", "Connect Home Refusal Reason", "Sales Order Channel Type", "Maintained By Group", "PS Flag", "Avalanche Flag", "Product Item Family" }, Xtab_Bool="False", Xtab_Flip="False" }, { Action_Type="Select", select_type=5 }, { Action_Type="Select", select_type=0, Key_Names={ "Theater", "Product Family", "Division", "Region", "Install at Country Name", "Connect Home Type", "Connect In Type", "SymmConnect Enabled", "Connect Home Refusal Reason", "Sales Order Channel Type", "Maintained By Group", "PS Flag", "Avalanche Flag" }, Key_Indexes={ { "AMERICAS", "ATMOS", "Latin America CS Division", "37000 CS Region", "Mexico", "", "", "", "", "DIRECT", "EMC", "N", "0" } } } } }, Num_Palette_cols=0, Num_Palette_rows=0 }, Format={ Window_Type="Tabular", Tabular={ Num_row_labels=8 } } } } } }, Widget_Set={ Widget_Layout="Vertical", Go_Button=1, Picklist_Width=0, Sort_Subset_Dimensions="TRUE", Order={ } }, Views={ { Data_Type=1, dbname="Previous Qtr Diveplan", diveline_dbname="Current Qtr Diveplan", logical_name="Current Qtr Diveplan", cols={ { name="Total TSS installs", column_type="Calc[Total TSS installs]", output_type="Number", format_string="." }, { name="TSS Valid Connectivity Records", column_type="Calc[TSS Valid Connectivity Records]", output_type="Number", format_string="." }, { name="% TSS Connectivity Record", column_type="Calc[% TSS Connectivity Record]", output_type="Number" }, { name="TSS Not Applicable", column_type="Calc[TSS Not Applicable]", output_type="Number", format_string="." }, { name="TSS Customer Refusals", column_type="Calc[TSS Customer Refusals]", output_type="Number", format_string="." }, { name="% TSS Refusals", column_type="Calc[% TSS Refusals]", output_type="Number" }, { name="TSS Eligible for Physical Connectivity", column_type="Calc[TSS Eligible for Physical Connectivity]", output_type="Number", format_string="." }, { name="TSS Boxes with Physical Connectivty", column_type="Calc[TSS Boxes with Physical Connectivty]", output_type="Number", format_string="." }, { name="% TSS Physical Connectivity", column_type="Calc[% TSS Physical Connectivity]", output_type="Number" } }, dim_cols={ { name="Model", column_type="Dimension[Model]", output_type="None" }, { name="Model", column_type="Dimension[Model]", output_type="None" }, { name="Connect In Type", column_type="Dimension[Connect In Type]", output_type="None" }, { name="Connect Home Type", column_type="Dimension[Connect Home Type]", output_type="None" }, { name="SymmConnect Enabled", column_type="Dimension[SymmConnect Enabled]", output_type="None" }, { name="Theater", column_type="Dimension[Theater]", output_type="None" }, { name="Division", column_type="Dimension[Division]", output_type="None" }, { name="Region", column_type="Dimension[Region]", output_type="None" }, { name="Sales Order Number", column_type="Dimension[Sales Order Number]", output_type="None" }, { name="Product Item Family", column_type="Dimension[Product Item Family]", output_type="None" }, { name="Item Serial Number", column_type="Dimension[Item Serial Number]", output_type="None" }, { name="Sales Order Deal Number", column_type="Dimension[Sales Order Deal Number]", output_type="None" }, { name="Item Install Date", column_type="Dimension[Item Install Date]", output_type="None" }, { name="SYR Last Dial Home Date", column_type="Dimension[SYR Last Dial Home Date]", output_type="None" }, { name="Maintained By Group", column_type="Dimension[Maintained By Group]", output_type="None" }, { name="PS Flag", column_type="Dimension[PS Flag]", output_type="None" }, { name="Connect Home Refusal Reason", column_type="Dimension[Connect Home Refusal Reason]", output_type="None", col_width=177 }, { name="Cust Name", column_type="Dimension[Cust Name]", output_type="None" }, { name="Sales Order Channel Type", column_type="Dimension[Sales Order Channel Type]", output_type="None" }, { name="Sales Order Type", column_type="Dimension[Sales Order Type]", output_type="None" }, { name="Part Model Key", column_type="Dimension[Part Model Key]", output_type="None" }, { name="Ship Date", column_type="Dimension[Ship Date]", output_type="None" }, { name="Model Number", column_type="Dimension[Model Number]", output_type="None" }, { name="Item Description", column_type="Dimension[Item Description]", output_type="None" }, { name="Customer Classification", column_type="Dimension[Customer Classification]", output_type="None" }, { name="CS Customer Name", column_type="Dimension[CS Customer Name]", output_type="None" }, { name="Install At Customer Number", column_type="Dimension[Install At Customer Number]", output_type="None" }, { name="Install at Country Name", column_type="Dimension[Install at Country Name]", output_type="None" }, { name="TLA Serial Number", column_type="Dimension[TLA Serial Number]", output_type="None" }, { name="Product Version", column_type="Dimension[Product Version]", output_type="None" }, { name="Avalanche Flag", column_type="Dimension[Avalanche Flag]", output_type="None" }, { name="Product Family", column_type="Dimension[Product Family]", output_type="None" }, { name="Project Number", column_type="Dimension[Project Number]", output_type="None" }, { name="PROJECT_STATUS", column_type="Dimension[PROJECT_STATUS]", output_type="None" } }, Available_Columns={ "Total TSS installs", "TSS Valid Connectivity Records", "% TSS Connectivity Record", "TSS Not Applicable", "TSS Customer Refusals", "% TSS Refusals", "TSS Eligible for Physical Connectivity", "TSS Boxes with Physical Connectivty", "% TSS Physical Connectivity", "Total Installs", "All Boxes with Valid Connectivty Record", "% All Connectivity Record", "Overall Refusals", "Overall Refusals %", "All Eligible for Physical Connectivty", "Boxes with Physical Connectivity", "% All with Physical Conectivity" }, Remaining_columns={ { name="Total Installs", column_type="Calc[Total Installs]", output_type="Number", format_string="." }, { name="All Boxes with Valid Connectivty Record", column_type="Calc[All Boxes with Valid Connectivty Record]", output_type="Number", format_string="." }, { name="% All Connectivity Record", column_type="Calc[% All Connectivity Record]", output_type="Number" }, { name="Overall Refusals", column_type="Calc[Overall Refusals]", output_type="Number", format_string="." }, { name="Overall Refusals %", column_type="Calc[Overall Refusals %]", output_type="Number" }, { name="All Eligible for Physical Connectivty", column_type="Calc[All Eligible for Physical Connectivty]", output_type="Number" }, { name="Boxes with Physical Connectivity", column_type="Calc[Boxes with Physical Connectivity]", output_type="Number" }, { name="% All with Physical Conectivity", column_type="Calc[% All with Physical Conectivity]", output_type="Number" } }, calcs={ { name="Total TSS installs", definition="Total[Total TSS installs]", ts_flag="Not TS Calc" }, { name="TSS Valid Connectivity Records", definition="Total[PS Boxes w/ valid connectivity record (1=yes)]", ts_flag="Not TS Calc" }, { name="% TSS Connectivity Record", definition="Total[PS Boxes w/ valid connectivity record (1=yes)] /Total[Total TSS installs]", ts_flag="Not TS Calc" }, { name="TSS Not Applicable", definition="Total[Bozes w/ valid connectivity record (1=yes)]-Total[Boxes Eligible (1=yes)]-Total[TSS Refusals]", ts_flag="Not TS Calc" }, { name="TSS Customer Refusals", definition="Total[TSS Refusals]", ts_flag="Not TS Calc" }, { name="% TSS Refusals", definition="Total[TSS Refusals]/Total[PS Boxes w/ valid connectivity record (1=yes)]", ts_flag="Not TS Calc" }, { name="TSS Eligible for Physical Connectivity", definition="Total[TSS Eligible]-Total[Exception]", ts_flag="Not TS Calc" }, { name="TSS Boxes with Physical Connectivty", definition="Total[PS Physical Connectivity] - Total[PS Physical Connectivity, SymmConnect Enabled=\"Capable not enabled\"]", ts_flag="Not TS Calc" }, { name="% TSS Physical Connectivity", definition="Total[Boxes w/ phys conn]/Total[Boxes Eligible (1=yes)]", ts_flag="Not TS Calc" }, { name="Total Installs", definition="Total[Total Installs]", ts_flag="Not TS Calc" }, { name="All Boxes with Valid Connectivty Record", definition="Total[Bozes w/ valid connectivity record (1=yes)]", ts_flag="Not TS Calc" }, { name="% All Connectivity Record", definition="Total[Bozes w/ valid connectivity record (1=yes)]/Total[Total Installs]", ts_flag="Not TS Calc" }, { name="Overall Refusals", definition="Total[Overall Refusals]", ts_flag="Not TS Calc" }, { name="Overall Refusals %", definition="Total[Overall Refusals]/Total[Bozes w/ valid connectivity record (1=yes)]", ts_flag="Not TS Calc" }, { name="All Eligible for Physical Connectivty", definition="Total[Boxes Eligible (1=yes)]-Total[Exception]", ts_flag="Not TS Calc" }, { name="Boxes with Physical Connectivity", definition="Total[Boxes w/ phys conn]-Total[Boxes w/ phys conn,SymmConnect Enabled=\"Capable not enabled\"]", ts_flag="Not TS Calc" }, { name="% All with Physical Conectivity", definition="Total[Boxes w/ phys conn]/Total[Boxes Eligible (1=yes)]", ts_flag="Not TS Calc" } }, merge_type="consolidate", merge_dbs={ { dbname="connectivityallproducts.mdl", diveline_dbname="/DI_PSREPORTING/connectivityallproducts.mdl" } }, skip_constant_columns="FALSE", categories={ { name="Geography", dimensions={ "Theater", "Division", "Region", "Install at Country Name" } }, { name="Mappings and Flags", dimensions={ "Connect Home Type", "Connect In Type", "SymmConnect Enabled", "Connect Home Refusal Reason", "Sales Order Channel Type", "Maintained By Group", "Customer Installable", "PS Flag", "Top Level Flag", "Avalanche Flag" } }, { name="Product Information", dimensions={ "Product Family", "Product Item Family", "Product Version", "Item Description" } }, { name="Sales Order Info", dimensions={ "Sales Order Deal Number", "Sales Order Number", "Sales Order Type" } }, { name="Dates", dimensions={ "Item Install Date", "Ship Date", "SYR Last Dial Home Date" } }, { name="Details", dimensions={ "Item Serial Number", "TLA Serial Number", "Part Model Key", "Model Number" } }, { name="Customer Infor", dimensions={ "CS Customer Name", "Install At Customer Number", "Customer Classification", "Cust Name" } }, { name="Other Dimensions", dimensions={ "Model" } } }, Maintain_Category_Order="FALSE", popup_info="false" } } };

  Read the article

• How to Add a Note to an Email Message in Outlook 2013

  - by Lori Kaufman

  There may be times when you want to add a note to an email message you received. Maybe you need to remember something about the sender or the contents of the email. There are several ways to add a note to an email message. NOTE: You can also create a new task containing an email message you received. This is useful if you need to do something related to the email. The new task will contain all the contents (except attachments) from the email. One method of adding a note to an email message is to flag the message. To do this, right-click on the flag icon in the flag column for the message to which you want to add a note. Select Custom from the popup menu. On the Custom dialog box, you can select a ready-made note from the Flag to drop-down list. You can also type a custom note in the Flag to edit box. Select a Start date and a Due date and setup a reminder, if desired. Click OK. The flag displays above the body of the email message when you double-click on the message to open it in the Message window. You can also put the cursor in the subject line of the message and add text to it, as shown below. When you close the message window, a confirmation dialog box displays asking if you want to save your changes. To save the note you added to the subject line, click Yes. Your note displays as part of the subject line on the message in your list of email messages. You can also add a note to the body of an email message. To do this, you must enable editing of the message. Double-click the message to open the Message window. Click Actions in the Move section of the Message tab and select Edit Message from the drop-down menu. Click in the body of the message and type your note. When you close the Message window, a confirmation dialog box displays asking if you want to save your changes. Click Yes to save you note in the body of the email. You can see the note you added if it is visible as part of the first line of the body displayed in the list of email messages. Use the Notes section of Outlook to create a separate note you can attach to an email message. To do this, click the … button on the Navigation Bar and select Notes from the popup menu. Click New Note on the Home tab of the Notes window (or press Ctrl + N) to create a note. Enter the text for your note in the small note window that displays and click the X button to close the note, saving it. To attach the note to the email message, make sure the Mail section of Outlook is active. Double-click on the message onto which you want to attach the note. Leaving the Message window open, go back to the main Outlook window and select Notes from the Navigation Bar, as mentioned above. Drag the note you created to the message window. The note is added to the message as an attachment. When you close the Message window, a confirmation dialog box displays asking if you want to save your changes. To save the message with your note added as an attachment, click Yes. A paperclip icon is added to the message in the list of email messages, indicating there is an attachment in the message. When you add a note to an email message as an attachment using the Notes section of Outlook, you don’t have to keep the original note. The note is now saved with the message, and can be deleted from the Notes section.     

  Read the article

• Calling a constructor from method within the same class

  - by Nathan

  I'm new to java and I'm learning about creating object classes. One of my homework assignment requires that I call the constructor at least once within a method of the same object class. I'm getting an error that says The method DoubleMatrix(double[][]) is undefined for the type DoubleMatrix Here's my constructor: public DoubleMatrix(double[][] tempArray) { // Declaration int flag = 0; int cnt; // Statement // check to see if doubArray isn't null and has more than 0 rows if(tempArray == null || tempArray.length < 0) { flag++; } // check to see if each row has the same length if(flag == 0) { for(cnt = 0; cnt <= tempArray.length - 1 || flag != 1; cnt++) { if(tempArray[cnt + 1].length != tempArray[0].length) { flag++; } } } else if(flag == 1) { makeDoubMatrix(1, 1);// call makeDoubMatrix method } }// end constructor 2 Here's the method where I try and call the constructor: public double[][] addMatrix(double[][] tempDoub) { // Declaration double[][] newMatrix; int rCnt, cCnt; //Statement // checking to see if both are of same dimension if(doubMatrix.length == tempDoub.length && doubMatrix[0].length == tempDoub[0].length) { newMatrix = new double[doubMatrix.length][doubMatrix[0].length]; // for loop to add matrix to a new one for(rCnt = 0; rCnt <= doubMatrix.length; rCnt++) { for(cCnt = 0; cCnt <= doubMatrix.length; cCnt++) { newMatrix[rCnt][cCnt] = doubMatrix[rCnt][cCnt] + tempDoub[rCnt][cCnt]; } } } else { newMatrix = new double[0][0]; DoubleMatrix(newMatrix) } return newMatrix; }// end addMatrix method Can someone point me to the right direction and explain why I'm getting an error?

  Read the article

• SQL SERVER – Log File Growing for Model Database – model Database Log File Grew Too Big

  - by pinaldave

  After reading my earlier article SQL SERVER – master Database Log File Grew Too Big, I received an email recently from another reader asking why does the log file of model database grow every day when he is not carrying out any operation in the model database. As per the email, he is absolutely sure that he is doing nothing on his model database; he had used policy management to catch any T-SQL operation in the model database and there were none. This was indeed surprising to me. I sent a request to access to his server, which he happily agreed for and within a min, we figured out the issue. He was taking the backup of the model database every day taking the database backup every night. When I explained the same to him, he did not believe it; so I quickly wrote down the following script. The results before and after the usage of the script were very clear. What is a model database? The model database is used as the template for all databases created on an instance of SQL Server. Any object you create in the model database will be automatically created in subsequent user database created on the server. NOTE: Do not run this in production environment. During the demo, the model database was in full recovery mode and only full backup operation was performed (no log backup). Before Backup Script Backup Script in loop DECLARE @FLAG INT SET @FLAG = 1 WHILE(@FLAG < 1000) BEGIN BACKUP DATABASE [model] TO  DISK = N'D:\model.bak' SET @FLAG = @FLAG + 1 END GO After Backup Script Why did this happen? The model database was in full recovery mode and taking full backup is logged operation. As there was no log backup and only full backup was performed on the model database, the size of the log file kept growing. Resolution: Change the backup mode of model database from “Full Recovery” to “Simple Recovery.”. Take full backup of the model database “only” when you change something in the model database. Let me know if you have encountered a situation like this? If so, how did you resolve it? It will be interesting to know about your experience. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Outlook DASL Filter - Custom Search

  - by Ryan B

  I'm trying to write a DASL filter to combine three queries: Get all mail with no category and no flag. ("urn:schemas-microsoft-com:office:office#Keywords" IS NULL AND "urn:schemas:httpmail:messageflag" IS NULL) Get all mail that is categorized as "Ryan" and flagged with a red "Today" flag. Don't know how to write this one. Get all mail that is uncategorized and flagged with a red "Today" flag. Don't know how to write this one. Once I have the individual queries, I will combine and OR them. I am stuck on how to filter the flag value.

  Read the article

• Nested IF's in Excel

  - by user1590499

  I have two columns with the following possibilities (0 for first column, and then 0 or 1 for second column; or a string for first column, and a 0 or 1 for second column). name,flag 0,0 david,0 0,1 sammy,1 How would I create a third column that looks like the following: name+flag 0 david 1 sammy Basically, if there are 2 0's in the two columns in a row, put a 0 in the new column. if there is a string in the first column in the row, no matter what the second column in the row says, put the string in the new column. and if there is a 0 in the first column and a 1 on the second column, put a 1 in the third column. Can I do this best with nested-if's? I tried something like name, flag, name+flag 0,0,=IF(A2<>0,A2,IF(B2=1,B2,0),0) But it didn't seem to work for me...

  Read the article

• x86 exceptions and flags

  - by b-gen-jack-o-neill

  Hi, please, I know that when you for example divide by zero, the aproptiate flag is set in CPU flag register. But today I read that there are special interrupt vectors (I think the first 16 in IVT) that are used for such conditions like dividing by zero. So, what I want to ask is, does any situation that couses change som flag also triggers apropriate interrupt? Becouse in school, we used conditional jumps that checks wheather carry flag has been set or not, and I don´t remember there was some interrupt triggerd by that. So I am pretty confused now.

  Read the article

• Caveats with the runAllManagedModulesForAllRequests in IIS 7/8

  - by Rick Strahl

  One of the nice enhancements in IIS 7 (and now 8) is the ability to be able to intercept non-managed - ie. non ASP.NET served - requests from within ASP.NET managed modules. This opened up a ton of new functionality that could be applied across non-managed content using .NET code. I thought I had a pretty good handle on how IIS 7's Integrated mode pipeline works, but when I put together some samples last tonight I realized that the way that managed and unmanaged requests fire into the pipeline is downright confusing especially when it comes to the runAllManagedModulesForAllRequests attribute. There are a number of settings that can affect whether a managed module receives non-ASP.NET content requests such as static files or requests from other frameworks like PHP or ASP classic, and this is topic of this blog post. Native and Managed Modules The integrated mode IIS pipeline for IIS 7 and later - as the name suggests - allows for integration of ASP.NET pipeline events in the IIS request pipeline. Natively IIS runs unmanaged code and there are a host of native mode modules that handle the core behavior of IIS. If you set up a new IIS site or application without managed code support only the native modules are supported and fired without any interaction between native and managed code. If you use the Integrated pipeline with managed code enabled however things get a little more confusing as there both native modules and .NET managed modules can fire against the same IIS request. If you open up the IIS Modules dialog you see both managed and unmanaged modules. Unmanaged modules point at physical files on disk, while unmanaged modules point at .NET types and files referenced from the GAC or the current project's BIN folder. Both native and managed modules can co-exist and execute side by side and on the same request. When running in IIS 7 the IIS pipeline actually instantiates a the ASP.NET  runtime (via the System.Web.PipelineRuntime class) which unlike the core HttpRuntime classes in ASP.NET receives notification callbacks when IIS integrated mode events fire. The IIS pipeline is smart enough to detect whether managed handlers are attached and if they're none these notifications don't fire, improving performance. The good news about all of this for .NET devs is that ASP.NET style modules can be used for just about every kind of IIS request. All you need to do is create a new Web Application and enable ASP.NET on it, and then attach managed handlers. Handlers can look at ASP.NET content (ie. ASPX pages, MVC, WebAPI etc. requests) as well as non-ASP.NET content including static content like HTML files, images, javascript and css resources etc. It's very cool that this capability has been surfaced. However, with that functionality comes a lot of responsibility. Because every request passes through the ASP.NET pipeline if managed modules (or handlers) are attached there are possible performance implications that come with it. Running through the ASP.NET pipeline does add some overhead. ASP.NET and Your Own Modules When you create a new ASP.NET project typically the Visual Studio templates create the modules section like this: <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <modules runAllManagedModulesForAllRequests="true" > </modules> </system.webServer> Specifically the interesting thing about this is the runAllManagedModulesForAllRequest="true" flag, which seems to indicate that it controls whether any registered modules always run, even when the value is set to false. Realistically though this flag does not control whether managed code is fired for all requests or not. Rather it is an override for the preCondition flag on a particular handler. With the flag set to the default true setting, you can assume that pretty much every IIS request you receive ends up firing through your ASP.NET module pipeline and every module you have configured is accessed even by non-managed requests like static files. In other words, your module will have to handle all requests. Now so far so obvious. What's not quite so obvious is what happens when you set the runAllManagedModulesForAllRequest="false". You probably would expect that immediately the non-ASP.NET requests no longer get funnelled through the ASP.NET Module pipeline. But that's not what actually happens. For example, if I create a module like this:<add name="SharewareModule" type="HowAspNetWorks.SharewareMessageModule" /> by default it will fire against ALL requests regardless of the runAllManagedModulesForAllRequests flag. Even if the value runAllManagedModulesForAllRequests="false", the module is fired. Not quite expected. So what is the runAllManagedModulesForAllRequests really good for? It's essentially an override for managedHandler preCondition. If I declare my handler in web.config like this:<add name="SharewareModule" type="HowAspNetWorks.SharewareMessageModule" preCondition="managedHandler" /> and the runAllManagedModulesForAllRequests="false" my module only fires against managed requests. If I switch the flag to true, now my module ends up handling all IIS requests that are passed through from IIS. The moral of the story here is that if you intend to only look at ASP.NET content, you should always set the preCondition="managedHandler" attribute to ensure that only managed requests are fired on this module. But even if you do this, realize that runAllManagedModulesForAllRequests="true" can override this setting. runAllManagedModulesForAllRequests and Http Application Events Another place the runAllManagedModulesForAllRequest attribute affects is the Global Http Application object (typically in global.asax) and the Application_XXXX events that you can hook up there. So while the events there are dynamically hooked up to the application class, they basically behave as if they were set with the preCodition="managedHandler" configuration switch. The end result is that if you have runAllManagedModulesForAllRequests="true" you'll see every Http request passed through the Application_XXXX events, and you only see ASP.NET requests with the flag set to "false". What's all that mean? Configuring an application to handle requests for both ASP.NET and other content requests can be tricky especially if you need to mix modules that might require both. Couple of things are important to remember. If your module doesn't need to look at every request, by all means set a preCondition="managedHandler" on it. This will at least allow it to respond to the runAllManagedModulesForAllRequests="false" flag and then only process ASP.NET requests. Look really carefully to see whether you actually need runAllManagedModulesForAllRequests="true" in your applications as set by the default new project templates in Visual Studio. Part of the reason, this is the default because it was required for the initial versions of IIS 7 and ASP.NET 2 in order to handle MVC extensionless URLs. However, if you are running IIS 7 or later and .NET 4.0 you can use the ExtensionlessUrlHandler instead to allow you MVC functionality without requiring runAllManagedModulesForAllRequests="true": <handlers> <remove name="ExtensionlessUrlHandler-Integrated-4.0" /> <add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" /> </handlers> Oddly this is the default for Visual Studio 2012 MVC template apps, so I'm not sure why the default template still adds runAllManagedModulesForAllRequests="true" is - it should be enabled only if there's a specific need to access non ASP.NET requests. As a side note, it's interesting that when you access a static HTML resource, you can actually write into the Response object and get the output to show, which is trippy. I haven't looked closely to see how this works - whether ASP.NET just fires directly into the native output stream or whether the static requests are re-routed directly through the ASP.NET pipeline once a managed code module is detected. This doesn't work for all non ASP.NET resources - for example, I can't do the same with ASP classic requests, but it makes for an interesting demo when injecting HTML content into a static HTML page :-) Note that on the original Windows Server 2008 and Vista (IIS 7.0) you might need a HotFix in order for ExtensionLessUrlHandler to work properly for MVC projects. On my live server I needed it (about 6 months ago), but others have observed that the latest service updates have integrated this functionality and the hotfix is not required. On IIS 7.5 and later I've not needed any patches for things to just work. Plan for non-ASP.NET Requests It's important to remember that if you write a .NET Module to run on IIS 7, there's no way for you to prevent non-ASP.NET requests from hitting your module. So make sure you plan to support requests to extensionless URLs, to static resources like files. Luckily ASP.NET creates a full Request and full Response object for you for non ASP.NET content. So even for static files and even for ASP classic for example, you can look at Request.FilePath or Request.ContentType (in post handler pipeline events) to determine what content you are dealing with. As always with Module design make sure you check for the conditions in your code that make the module applicable and if a filter fails immediately exit - minimize the code that runs if your module doesn't need to process the request.© Rick Strahl, West Wind Technologies, 2005-2012Posted in IIS7   ASP.NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• SQL SERVER – Fix: Error: 8117: Operand data type bit is invalid for sum operator

  - by pinaldave

  Here is the very interesting error I received from a reader. He has very interesting question. He attempted to use BIT filed in the SUM aggregation function and he got following error. He went ahead with various different datatype (i.e. INT, TINYINT etc) and he was able to do the SUM but with BIT he faced the problem. Error Received: Msg 8117, Level 16, State 1, Line 1 Operand data type bit is invalid for sum operator. Reproduction of the error: Set up the environment USE tempdb GO -- Preparing Sample Data CREATE TABLE TestTable (ID INT, Flag BIT) GO INSERT INTO TestTable (ID, Flag) SELECT 1, 0 UNION ALL SELECT 2, 1 UNION ALL SELECT 3, 0 UNION ALL SELECT 4, 1 GO SELECT * FROM TestTable GO Following script will work fine: -- This will work fine SELECT SUM(ID) FROM TestTable GO However following generate error: -- This will generate error SELECT SUM(Flag) FROM TestTable GO The workaround is to convert or cast the BIT to INT: -- Workaround of error SELECT SUM(CONVERT(INT, Flag)) FROM TestTable GO Clean up the setup -- Clean up DROP TABLE TestTable GO Workaround: As mentioned in above script the workaround is to covert the bit datatype to another friendly data types like INT, TINYINT etc. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Best way to let users choose country/language when submiting an URL to a directory

  - by Claudiu

  Hi all, I want to offer the user the possibility to add the country/language for websites they would submit to a fairly simple website directory. I have a folder with flags from http://www.famfamfam.com/lab/icons/flags/ . The flag images are named according to the ISO 3166-1 alpha-2 country codes, meaning that I could make a PHP script that would be able to retrieve images and the name of the country retrieved from the image name (not the full name, but it wouldn't be necessary). Just to make things clearer, I couldn't find a proper combo-box jQuery plugin for my needs (that would act exactly like the native but with an icon before the text) and don't really have the time to develop one on my own. Considering the number of images, I also wouldn't just display them all with a radio box near them. Also, having a classic drop-down list would be a nightmare for me as I would have to assign the short country name manually to each entry, or do it once for every country. Offering the user a dropdown list with the short country names but no flag near them would also be unfriendly and confusing. The idea is that every website featured in the directory would have the country flag icon near it. I have the images named properly but I don't know how to let the user choose the right image for their website. Any idees? Thank you all in advance! EDIT Temporary solution is this file: http://www.andrewpatton.com/countrylist.csv It contains a list of countries including various other info, like the short country name, the same name that's used for the flag images. I can take that information and have a classic like this: <select name="countries"> <option value="ro">Romania</option> <option value="ie">Ireland</option> <!-- and so on --> </select> Still, If anybody has a better idea...

  Read the article

• Current SPARC Architectures

  - by Darryl Gove

  Different generations of SPARC processors implement different architectures. The architecture that the compiler targets is controlled implicitly by the -xtarget flag and explicitly by the -arch flag. If an application targets a recent architecture, then the compiler gets to play with all the instructions that the new architecture provides. The downside is that the application won't work on older processors that don't have the new instructions. So for developer's there is a trade-off between performance and portability. The way we have solved this in the compiler is to assume a "generic" architecture, and we've made this the default behaviour of the compiler. The only flag that doesn't make this assumption is -fast which tells the compiler to assume that the build machine is also the deployment machine - so the compiler can use all the instructions that the build machine provides. The -xtarget=generic flag tells the compiler explicitly to use this generic model. We work hard on making generic code work well across all processors. So in most cases this is a very good choice. It is also of interest to know what processors support the various architectures. The following Venn diagram attempts to show this: A textual description is as follows: The T1 and T2 processors, in addition to most other SPARC processors that were shipped in the last 10+ years supported V9b, or sparcvis2. The SPARC64 processors from Fujitsu, used in the M-series machines, added support for the floating point multiply accumulate instruction in the sparcfmaf architecture. Support for this instruction also appeared in the T3 - this is called sparcvis3 Later SPARC64 processors added the integer multiply accumulate instruction, this architecture is sparcima. Finally the T4 includes support for both the integer and floating point multiply accumulate instructions in the sparc4 architecture. So the conclusion should be: Floating point multiply accumulate is supported in both the T-series and M-series machines, so it should be a relatively safe bet to start using it. The T4 is a very good machine to deploy to because it supports all the current instruction sets.

  Read the article

• Best way to let users choose country/language when submiting an URL to a directory

  - by Claudiu

  I want to offer the user the possibility to add the country/language for websites they would submit to a fairly simple website directory. I have a folder with flags from http://www.famfamfam.com/lab/icons/flags/ . The flag images are named according to the ISO 3166-1 alpha-2 country codes, meaning that I could make a PHP script that would be able to retrieve images and the name of the country retrieved from the image name (not the full name, but it wouldn't be necessary). Just to make things clearer, I couldn't find a proper combo-box jQuery plugin for my needs (that would act exactly like the native but with an icon before the text) and don't really have the time to develop one on my own. Considering the number of images, I also wouldn't just display them all with a radio box near them. Also, having a classic drop-down list would be a nightmare for me as I would have to assign the short country name manually to each entry, or do it once for every country. Offering the user a dropdown list with the short country names but no flag near them would also be unfriendly and confusing. The idea is that every website featured in the directory would have the country flag icon near it. I have the images named properly but I don't know how to let the user choose the right image for their website. Any idees? Thank you all in advance! EDIT Temporary solution is this file: http://www.andrewpatton.com/countrylist.csv It contains a list of countries including various other info, like the short country name, the same name that's used for the flag images. I can take that information and have a classic like this: <select name="countries"> <option value="ro">Romania</option> <option value="ie">Ireland</option> <!-- and so on --> </select> Still, If anybody has a better idea...

  Read the article

• Rendering design. How can I effectively deal with forward, deferred and transparent rendering?

  - by user1423893

  I have many objects in my game world that all derive from one base class. Each object will have different materials and will therefore be required to be drawn using various rendering techniques. I currently use the following order for rendering my objects. Deferred Forward Transparent (order independent) Each object has a rendering flag that denotes which one of the above methods should be used. The list of base objects in the scene are then iterated through and added to separate lists of deferred, forward or transparent objects based on their rendering flag value. The individual lists are then iterated through and drawn using the order above. Each list is cleared at the end of the frame. This methods works fairly well but it requires different draw methods for each material type. For example each object will require the following methods in order to be compatible with the possible flag settings. object.DrawDeferred() object.DrawForward() object.DrawTransparent() It is also hard to see where methods outside of materials, such as rendering shadow maps, would fit using this "flag & method" design. object.DrawShadow() I was hoping that someone may have some suggestions for improving this rendering process, possibly making it more generic and less verbose?

  Read the article

• trying to setup multiple primary partitions on ubuntu linux

  - by JohnMerlino

  I currently have ubuntu desktop installed on a harddrive. I want to partition the harddrive so that I can reserve 30 gigs for ubuntu server and 30 gigs for ubuntu desktop. The drive has 300 gigs available. Right now I am booting from dvd drive and installing ubuntu server. I selected "Guided partitioning" and created a 30 gig primary partition of Ext4 journaling filesystem, set "yes, format it" for format partition and set bootable flag to on. I intend to use this 30 gig partition to hold ubuntu server and allow me to boot from it. Now I have two other partitions. They are both set to "logical", one is currently using 285.8 gigs and is using ext4 (when I try to set bootable flag to true, it gives a warning "You are trying to set the bootable flag on a logical partition. The bootable flag is only useful on the primary partitions"). More alarming it says "No existing file system was detected in this partition". Actually, Im thinking that this is the parittion that is supposed to be holding my current Ubuntu Desktop. And of course I want this to be bootable and be a primary partition, so I could dual boot from this and the server partition. Now the third partition is also set to logical and it is being used as swap area. My question is regarding that second partition. Its supposed to be a primary partition thats holding my existing ubuntu desktop edition. How do I switch it to primary and to make sure that its pointing to my existing desktop installation?

  Read the article

• Problem with Variable Scoping in Rebol's Object

  - by Rebol Tutorial

  I have modified the rebodex app so that it can be called from rebol's console any time by typing rebodex. To show the title of the app, I need to store it in app-title: system/script/header/title so tha it could be used later in view/new/title dex reform [self/app-title version] That works but as you can see I have named the var name "app-title", but if I use "title" instead, the window caption would show weird stuff (vid code). Why ? REBOL [ Title: "Rebodex" Date: 23-May-2010 Version: 2.1.1 File: %rebodex.r Author: "Carl Sassenrath" Modification: "Rebtut" Purpose: "A simple but useful address book contact database." Email: %carl--rebol--com library: [ level: 'intermediate platform: none type: 'tool domain: [file-handling DB GUI] tested-under: none support: none license: none see-also: none ] ] rebodex.context: context [ app-title: system/script/header/title version: system/script/header/version set 'rebodex func[][ names-path: %names.r ;data file name-list: none fields: [name company title work cell home car fax web email smail notes updat] names: either exists? names-path [load names-path][ [[name "Carl Sassenrath" title "Founder" company "REBOL Technologies" email "%carl--rebol--com" web "http://www.rebol.com"]] ] brws: [ if not empty? web/text [ if not find web/text "http://" [insert web/text "http://"] error? try [browse web/text] ] ] dial: [request [rejoin ["Dial number for " name/text "? (Not implemented.)"] "Dial" "Cancel"]] dex-styles: stylize [ lab: label 60x20 right bold middle font-size 11 btn: button 64x20 font-size 11 edge [size: 1x1] fld: field 200x20 font-size 11 middle edge [size: 1x1] inf: info font-size 11 middle edge [size: 1x1] ari: field wrap font-size 11 edge [size: 1x1] with [flags: [field tabbed]] ] dex-pane1: layout/offset [ origin 0 space 2x0 across styles dex-styles lab "Name" name: fld bold return lab "Title" title: fld return lab "Company" company: fld return lab "Email" email: fld return lab "Web" brws web: fld return lab "Address" smail: ari 200x72 return lab "Updated" updat: inf 200x20 return ] 0x0 updat/flags: none dex-pane2: layout/offset [ origin 0 space 2x0 across styles dex-styles lab "Work #" dial work: fld 140 return lab "Home #" dial home: fld 140 return lab "Cell #" dial cell: fld 140 return lab "Alt #" dial car: fld 140 return lab "Fax #" fax: fld 140 return lab "Notes" notes: ari 140x72 return pad 136x1 btn "Close" #"^q" [store-entry save-file unview] ] 0x0 dex: layout [ origin 8x8 space 0x1 styles dex-styles srch: fld 196x20 bold across rslt: list 180x150 [ nt: txt 178x15 middle font-size 11 [ store-entry curr: cnt find-name nt/text update-entry unfocus show dex ] ] supply [ cnt: count + scroll-off face/text: "" face/color: snow if not n: pick name-list cnt [exit] face/text: select n 'name face/font/color: black if curr = cnt [face/color: system/view/vid/vid-colors/field-select] ] sl: slider 16x150 [scroll-list] return return btn "New" #"^n" [new-name] btn "Del" #"^d" [delete-name unfocus update-entry search-all show dex] btn "Sort" [sort names sort name-list show rslt] return at srch/offset + (srch/size * 1x0) bx1: box dex-pane1/size bx2: box dex-pane2/size return ] bx1/pane: dex-pane1/pane bx2/pane: dex-pane2/pane rslt/data: [] this-name: first names name-list: copy names curr: none search-text: "" scroll-off: 0 srch/feel: make srch/feel [ redraw: func [face act pos][ face/color: pick face/colors face system/view/focal-face if all [face = system/view/focal-face face/text search-text] [ search-text: copy face/text search-all if 1 = length? name-list [this-name: first name-list update-entry show dex] ] ] ] update-file: func [data] [ set [path file] split-path names-path if not exists? path [make-dir/deep path] write names-path data ] save-file: has [buf] [ buf: reform [{REBOL [Title: "Name Database" Date:} now "]^/[^/"] foreach n names [repend buf [mold n newline]] update-file append buf "]" ] delete-name: does [ remove find/only names this-name if empty? names [append-empty] save-file new-name ] clean-names: function [][n][ forall names [ if any [empty? first names none? n: select first names 'name empty? n][ remove names ] ] names: head names ] search-all: function [] [ent flds] [ clean-names clear name-list flds: [name] either empty? search-text [insert name-list names][ foreach nam names [ foreach word flds [ if all [ent: select nam word find ent search-text][ append/only name-list nam break ] ] ] ] scroll-off: 0 sl/data: 0 resize-drag scroll-list curr: none show [rslt sl] ] new-name: does [ store-entry clear-entry search-all append-empty focus name ; update-entry ] append-empty: does [append/only names this-name: copy []] find-name: function [str][] [ foreach nam names [ if str = select nam 'name [ this-name: nam break ] ] ] store-entry: has [val ent flag] [ flag: 0 if not empty? trim name/text [ foreach word fields [ val: trim get in get word 'text either ent: select this-name word [ if ent val [insert clear ent val flag: flag + 1] ][ if not empty? val [repend this-name [word copy val] flag: flag + 1] ] if flag = 1 [flag: 2 updat/text: form now] ] if not zero? flag [save-file] ] ] update-entry: does [ foreach word fields [ insert clear get in get word 'text any [select this-name word ""] ] show rslt ] clear-entry: does [ clear-fields bx1 clear-fields bx2 updat/text: form now unfocus show dex ] show-names: does [ clear rslt/data foreach n name-list [ if n/name [append rslt/data n/name] ] show rslt ] scroll-list: does [ scroll-off: max 0 to-integer 1 + (length? name-list) - (100 / 16) * sl/data show rslt ] do resize-drag: does [sl/redrag 100 / max 1 (16 * length? name-list)] center-face dex new-name focus srch show-names view/new/title dex reform [app-title version] insert-event-func [ either all [event/type = 'close event/face = dex][ store-entry unview ][event] ] do-events ] ]

  Read the article

• Part 7: EBS Modifications and Flagged Files in R12

  - by volker.eckardt(at)oracle.com

  Let me, based on my previous blog, explain the procedure of flagged files a bit better and facilitate the same with screenshots. Flagged files is a concept within the Oracle eBusiness Suite (EBS) release 12, where you flag a standard deployment file, let’s say a Forms file, a Package or a Java class file. When you run the patch analyse, the list of flagged files will be checked and in case one of these files gets patched, the analyse report will tell you. Note: This functionality is also available in release 11, here it is implemented and known as “applcust.txt”. You can flag as many files as you want, in whatever relationship they are with your customizations. In addition to the flag itself you can add a comment. You should use this comment to point to your customization reference (here XXAR_RPT_066 or XXAP_CUST_030). Consider the following two cases: You have created your own report, based on a standard report. In this case you will flag the report file itself, and the key views used. When a patch updates one of these files, you will be informed and can initiate a proper review and testing. (ex.: first line for ARXCTA.rdf) You have created an extensive personalization and because it is business critical you like to be informed if the page definition gets updated. In this case you register the PG.xml file as flagged file. (ex.: second line below for CreateExtBankAcctPG.xml) The menu path to register flagged files is the following: (R) System Administrator > (M) Oracle Applications Manager > Site Map > Maintenance > Register Flagged Files     Your DBA should now run the Patch Analyse every time he is going to apply a new patch. (R) System Administrator > (M) Oracle Applications Manager > Patch Wizard > Task “Recommend/Analyze Patches” The screenshot above shows the impact summary. For this blog entry the number “2” titled “Flagged Files Changed“ is in our focus. When you click the “2” you will get a similar screen like the first in this blog, showing you exactly the files which will get patched if you continue and apply this patch in this environment right now. Note: It is also shown that just 20% of all patch files will get applied. This situation might be different in case your environments are on a different patch level. For sure also the customization impact might then be different. The flagging step can be done directly in the Oracle Applications Manager.  Our developers are responsible for. To transport such a flag+comment we use a FNDLOAD script. It is suggested to put the flagged files data file directly into your CEMLI patch. Herewith the flagged files registration will be executed right at the same time when the patch gets applied. Process Steps: Developer: Builds CEMLI Reviews code and identifies key standard objects referenced Determines standard object files and flags them Creates FNDLOAD file and adds the same to the CEMLI patch DBA: Executes for every new Oracle standard patch the patch analyse in a representative environment Checks and retrieves the flagged files and comments Sends flagged file list back to development team for analyse / retest Developer: Analyses / Updates / Retests effected CEMLIs Prerequisite: The patch analyse has to be executed in an environment where flagged files have been registered. (If you run the patch analyse in a vanilla or outdated environment (compared to your PROD), the analyse will not be so helpful!) When to start with Flagged files? Start right now utilizing this feature. It is an invest to improve the production stability and fulfil your SLA!   Summary Flagged Files is a very helpful EBS R12 technique when analysing patches. Implement a procedure within your development process to maintain such flags. Let the DBA run the patch analyse in an environment with a similar patch and customization level as your current production.   Related Links: EBS Patching Procedures - Chapter 2-13 - Registered Flagged Files

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >