Search Results

Search found 4066 results on 163 pages for 'intel x25'.

Page 7/163 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• ubuntu 10.04: wlan0 No such device

  - by AodhanOL

  I am using a Dell xps l702x and I am using ubuntu 10.04 because I need to use f77 (don't ask) and I wasn't able to get it working on later versions of ubuntu. I cannot use the wifi at all. I have tried to fix it and have had limited success (changed the output from rfkill list all from Hard blocked: yes, to hard blocked: no). Here is the output from rfkill list all aodhan@aodhan-laptop:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: dell-bluetooth: Bluetooth Soft blocked: no Hard blocked: no Here is the output from iwconfig: aodhan@aodhan-laptop:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. pan0 no wireless extensions. And here is the output from ifconfig -a: aodhan@aodhan-laptop:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 5c:f9:dd:3d:f2:f7 inet addr:192.168.1.17 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::5ef9:ddff:fe3d:f2f7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3417 errors:0 dropped:0 overruns:0 frame:0 TX packets:2894 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3317567 (3.3 MB) TX bytes:505049 (505.0 KB) Interrupt:30 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) pan0 Link encap:Ethernet HWaddr 7e:7e:e8:39:70:af BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) And finally, the output from lspci: 00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Device 0116 (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c4b (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 1246 (rev a1) 03:00.0 Network controller: Intel Corporation Device 008a (rev 34) 04:00.0 USB Controller: NEC Corporation Device 0194 (rev 04) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Please help me! Thank you in advance. Edit: Further info - this is a dual install with a windows 7 system as the other option. However, I can't access that until tomorrow (I won't have access to the windows 7 disc until then, and grub isn't letting me load it). Therefore, I can't be sure whether it still works on that or not. It used to, though.

  Read the article

• Dock with dual external DVI monitors with Intel + Nvidia Optimus?

  - by Ryan

  I have a Dell Latitude E6420 laptop plugged into a docking station, and the dock has 2 monitors (connected with DVI). Also note that I've installed Ubuntu alongside (dual-boot) Windows 7. I can't get the dual monitors to work both on Ubuntu (either 11.10 or 12.04) and Windows 7. When I run lspci | grep VGA, I get: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF108 [Quadro NVS 4200M] (rev a1) If I then reboot and uncheck Optimus setting in the BIOS during reboot, I'm able to get the dual monitors to work in Ubuntu 12.04 (but I need to configure them every boot in Nvidia Settings). When I run lspci | grep VGA, I get: 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [Quadro NVS 4200M] (rev a1) But then if I reboot into Windows (leaving the Optimus unchecked), Windows can't detect external monitors, and the resolution is unacceptably low. I've seen on many forum posts that this particular graphics card setup causes lots of headaches. I haven't been able to resolve my problem yet. How can I use my external display on my laptop with intel and nvidia video cards? How to use external displays with Intel driver on a NVidia/Intel hybrid system nVidia Optimus , Unity 3D and Dual Monitors "Just use VGA instead of DVI" isn't an option because my dock has only 1 VGA port (and 2 DVI). Switching the BIOS setting on every reboot and then reconfiguring the display settings every time is tedious, time-consuming, and impractical. Do you know how to make this work smoothly? Thanks for your help! P.S. see also: http://superuser.com/questions/434358/dell-latitude-e6420-dual-boot-ubuntu-windows-7-optimus-graphics-problems

  Read the article

• How do I get my Intel HD graphics to work alongside my HD7850, as my second(HDMI out) monitor?

  - by AlexTes

  Title says it all. Further info: Motherboard: http://www.asrock.com/mb/Intel/Z77%20Pro3/ Processor: http://ark.intel.com/products/65520/Intel-Core-i5-3570K-Processor-%286M-Cache-up-to-3_80-GHz%29 So currently my main screen is running on my HD7850. Got drivers from the amd website. I have looked through dozens of questions here. I'm about to try booting Ubuntu from a stick and seeing if the xorg-edgers drivers might help. When booting, all action goes down on the very screen I'm trying to get to work.*EDIT never mind this. Seems to be special boot magic. As the screen only displays whiteline errors once the gui of ubuntu has kicked in and everything graphic is happening through my graphics card again. Connected through HDMI(motherboard)-DVI. So unless having multiple displays is a huge deal the solution hopefully isn't that complicated. I just feel I'm missing something simple. If this really is complicated, I should probably just hook up the display to my graphics card. My CPU is usually the one chilling out though so I'd like to try to get that to work. Also just because I don't want to buy an extra cable and this set up makes me feel warm and fuzzy inside. Tell me what to try or look up, I'll be most appreciative. Thank you! **UPDATE The x-swat ppa installed some intel stuff. Booting with one monitor plugged into the motherboard gives nothing. Doing it with the pc already on gives the purple "Ubuntu" with 5 dots boot/shutdown screen.

  Read the article

• Video quality too bad while playing (any) videos in Intel GM965/GL960 Integrated Graphics Controller Ubuntu 12.04

  - by Sukhdev

  I have searched blogs and forums, installed several drivers, but can't find a solution that can provide equivalent video quality as that of Windows 7. Kindly help. Video quality specially color is too bad while playing with any media player. Configuration details are: Ubuntu - 12.04 Intel Corporation Mobile GM965/GL960 Integrated The results of the following commands are a) sudo lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) b) find /dev -group video /dev/fb0 /dev/dri/card0 /dev/dri/controlD64 /dev/agpgart c) glxinfo | grep -i vendor server glx vendor string: SGI client glx vendor string: ATI OpenGL vendor string: Tungsten Graphics, Inc d) sudo lshw -C video *-display:0 description: VGA compatible controller product: Mobile GM965/GL960 Integrated Graphics Controller (primary) vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 0c width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:fea00000-feafffff memory:e0000000-efffffff ioport:efe8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile GM965/GL960 Integrated Graphics Controller (secondary) vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 0c width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:feb00000-febfffff I have spent days installing various drivers, and then un-installing but can't come up with a solution. Please help.

  Read the article

• Intel RST crashing! IAStorUI unstable in win 8.1

  - by user269549

  I have a Z87E-ITX Asrock mobo. Using a new 64G Corsair SSD as cache and a new Western Digi Black Scorpion 750G 2.5" drive. Using windows 8.1. Latest software or not, I can't open Intel RST software without it saying IAStorUI has stopped working. A problem caused the program to stop working correctly blah blah. I have had some issues recently with Robotic sounds causing fps drops etc but found it was the HDD. After a standard windows scan and fix (& update to win 8.1) I haven't been able to open Intel RST. I thought maybe I should try to look for an SSD cache drive checker but as it doesn't show up as a drive, I'm unsure how any program can scan it.

  Read the article

• Fedora 12 Wireless problems (Intel Wireless 4965AGN Card)

  - by Ninefingers

  Hi All, I'm having an interesting experience with my wireless card at the moment. Basically, it does like this: I connect to the local wireless network (netgear router) It works, briefly, allowing me to browse a webpage or maybe two, if I'm lucky. It then stops working / sending any packets, whilst reported still connected. Now, me being me I've had a look to see what I can find. wpa_supplicant.log looks like this: Trying to associate with valid_mac:a2:30 (SSID='vennardwireless' freq=2462 MHz) Associated with valid_mac:a2:30 WPA: Key negotiation completed with valid_mac:a2:30 [PTK=CCMP GTK=TKIP] CTRL-EVENT-CONNECTED - Connection to valid_mac:a2:30 completed (reauth) [id=0 id_str=] CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys So that's working fine. dmesg | grep "*iwl*" spits out this: iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = 00:24:b2:32:a3:30 tid = 0 iwlagn 0000:03:00.0: iwl_tx_agg_start on ra = 00:24:b2:32:a3:30 tid = 0 So that's working too. I can also ping 192.168.0.1 -I wlan0 and arping 192.168.0.1 -I wlan0 the router until the network falls over. uname -r:2.6.32.10-90.fc12.x86_64. Laptop is a Core2 Duo (2Ghz) with 3GB RAM. Other symptoms I've noticed are that wireshark freezes when I capture on the "broken" interface until I disconnect. Am using networkmanager as per normal. Stupidly, I can connect to the same router via eth0/a cat6 cable just fine. Everyone else can connect to the AP fine (from Windows). Yes, I'm sat right next to it and not trying to access a hotspot the other side of the world. Any ideas? Is this a broken update? (I intend to reboot and test an older kernel later)? Anyone else come across this? Edit: iwconfig wlan0 rate auto is the settings I'm using for rates. Also, according to networkmanager the network is still connected. Thanks for any pointers / advice.

  Read the article

• Intel D510MO board - 1000Mbit LAN or not?

  - by T.J. Crowder

  The Intel forum seems to be down (signing in fails with connection refused), but perhaps someone here knows the answer. The Intel D510MO product page says that the LAN is 10/100/1000, but when I look at the NM10 chipset it uses, it says it's just 10/100 (and the detailed PDF spec here backs that up pretty definitively). I don't immediately see anything saying the D510MO has a different LAN controller than the NM10's onboard one, and it would seem odd if it did given the purpose of the board (low power, small footprint; integrated). Does this board support 1000Mbit LAN or not? Anyone have direct knowledge of it? Thanks in advance.

  Read the article

• Can't get Intel drivers for ASUS P6T Deluxe

  - by Alex K

  Hi everybody, A few days back my Win7 Ultimate started bugging me to install the RAID drivers for my ASUS P6T Delux. Fine, I'm all for having up to date drivers even for stuff I don't use. The problem is that the drivers I download from both ASUS support site here and the ones I get directly from Intel (can't post the second link, since I have less than 10 rep, but it's the first hit for "Intel(R) Matrix Storage Manager Driver" on google) say that my system does not meet the minimum system requirements. Impossible, I would think, what with it having the X58 chipset and the Windows version is supported one. Has anyone encountered something like this before? Any clues on how to solve this would be much appreciated. Thanks!

  Read the article

• Intel 520 SSD drives not working with lsi controller on VMware esxi 5

  - by Michael

  We have a problem with our LSI 9266 controller. LSI have vmware drivers which normally show the health status of connected drives, raid controller, battery etc from within the vSphere Client. This driver also allows connectivity from the LSI MSM utility from a windows workstation. The problem is as soon as I connect my intel 520 SSD drives the health status in the vsphere client disappears, also we lose connectivity via the LSI MSM utlity. Any other drives we test are fine, 1TB SAS drives, other SSD drives etc are all OK. The Intel drives are on the compatability list and are supported by LSI but dont work with the VMware driver. If I install a windows OS on the physical server we have no problems. I have logged a ticket with LSI but they havent been very helpful. I am trying to find other people that may have had the same issue and maybe even a fix

  Read the article

• New XEN Server, Intel i7, Errors were encountered while processing: xen-linux-system-amd64

  - by Sheldon

  I have just got a new machine to run XEN VM's on, it has an Intel i7 processor: - Intel Haswell Core i7-4790 3.6GHz 8MB LGA1150 I have setup the host with the current 6.2.0 I have set up a new Debian 7 64bit VM and any package I try and run fails with the following errors: Errors were encountered while processing: xen-utils-common xen-utils-4.1 xen-system-amd64 xen-linux-system-3.2.0-4-amd64 xen-linux-system-amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) Excuse my noob-ness but should it even be running an AMD package ? Any ideas on how to fix this ? Thanks

  Read the article

• Intel VT-x disappeared after upgrading to Windows 8

  - by StepTNT

  I've upgraded to Windows 8 some weeks ago (MSDNAA!) and today, while I was trying to run a VM, I've noticed that VT-x is disabled. Now, Hyper-V works without problems, as I've tried emulating Win7 and WP8; but VirtualBox says that VT-x is disabled and it can't run my VM. Just to double check, I've run Securable by GRC and the Intel utility and both says that I've got VT-x off. Here comes the problem: VT-x is ON in my BIOS, and it worked flawlessly before upgrading to Windows 8! Any kind of suggestion? EDIT: My CPU supports VT-x: http://ark.intel.com/products/52219

  Read the article

• Is Hyper-V Server 2008 working on Intel's Atom platform

  - by Josip Medved

  Did anybody try to install Hyper-V on Intel Atom platform? Hyper-V requires: x64 compatible processor with Intel VT or AMD-V technology enabled Hardware Data Execution Prevention (DEP) It seems that both requirements are satisfied with Atom as processor. However, I wonder whether there is some blocking issue (e.g. BIOS that does not support it) since all Atom motherboards I checked had quite old north/south-bridge. My intentions are to run two low-requirements virtual machines (embedded Linux), so performance should not be an issue.

  Read the article

• Recover Intel Matrix Raid Configuration

  - by Catalin DICU

  Hello, I had 2 HDDs in Intel Matrix Raid configuration on a motherboard with intel ICH9R. I had some RAID 0 partitions and one RAID 1 partition. Somehow when replacing my videocard I partially unpulugged the power connector from one of the HDD. I booted and only one disk was showing. So I turned off the PC and correctly plugged the power connector and how both HDDs are showing as "Non-Raid Disk" Is there a way to restore the raid configuration from before ? In fact I don't really remember how my partitions where configured, I had 2x100Gb + 1x296Gb in RAID 0 and one 50Gb in RAID 1 (using 2x320Gb HDDs) but I'm not sure how many volumes and how the partitions where allocated on the volumes. Is there a tool to find that ? Thanks

  Read the article

• Mobile Intel® GMA 4500MHD boost

  - by Andy Smith

  My machine has a Mobile Intel® GMA 4500MHD integrated graphics chipset. The machine is currently running 64 bit windows 7 premium with 3GB of ram (1x1gb and 1x2gb). I note that the Mobile Intel® GMA 4500MHD shares the physical memory to process the graphics. now, the total available graphics memory can be up to 1,340 MB with a 32-bit operating system and 3 GB system memory or 1,759 MB with a 64-bit operating system and 4 GB system memory. I am considering investing in a 4GB stick to replace the 1gb stick bringing the total up to 6gb, mainly for an increase in graphics processing ability. Can anyone let me know what sort of power (if any over the 4gb) I could expect by upgrading to 6GB?

  Read the article

• Migrating XenServer VMs from Intel to AMD servers

  - by John Smith

  I need to replace my XenServer 6.1 resource pool hardware. I currently run Intel hardware and I have to move to AMD hardware (corporate politics and budget stuff, blah blah blah). I have downtime available so I can use cold migration - live migration is not required. I will also have the new hardware (AMD) alongside the old hardware (Intel). The XenServer docs say there may be problems exporting from one arch and importing to another "may not work" - http://docs.vmd.citrix.com/XenServer/6.1.0/1.0/en_gb/guest.html#importing_vms - but mentions nothing about simply turning off the VM on one arch and then powering it back on new arch. VMs are a mix of OS - some Windows, some Linux, multiple versions. Is this something that can be done with no problems, or are there problems I need to be aware of?

  Read the article

• Better graphics or better cpu on a budget laptop.

  - by jones

  Which would have better overall performance on a cheap (~$600) laptop; Intel Atom 330 with Nvidia ion or intel Pentium/Celeron with Intel graphics. I don't need 8 hour battery life and will hopefully be using this for programming/web browsing and occasionally light gaming.

  Read the article

• Is an Intel Atom D525 suitable to run MythTV

  - by Martin Thompson

  I have an oldish netbook with an Atom N450 (1.6GHz, 512KB cache) - I've been using it to experiment with MythTV, but it seems really slow, even just to work through the menus! Seconds, sometimes 10 or 20s, to load a new menu. Admittedly from a remote backend, but my older Core1 based laptop seems to be fine with the same setup. I was hoping to use one of the so-called "nettop" devices which currently seem to be D525-based (1.8GHz, 1MB cache) - is double the cache really going to make that much difference? Or has the internal architecture of the Atom moved on leaps and bounds in between? Given that I design non-Intel embedded computers for a living I was hoping to get lots of hardcore architecture detail from the Intel website, so I could see for myself, but I can't find it! So: will a D525 be fast enough to run a MythTV backend/frontend combined box?

  Read the article

• Intel Server Board S3420GP fails to boot with video connected

  - by Riley

  All, Building a new system using an Intel Server Board S3420GP motherboard and an Intel Xeon X3440 processor. Before installing this motherboard into the chassis we want to test that it will actually boot correctly. We have mounted the processor and RAM with no hard drives attached. The boot sequence differs between the next variable: 1) Connecting video results in the system fans ramp up and down, twice, and then the system beeps with the same behavior repeating; the system status light shows "Amber" 2) With no video, the system goes through POST and the diag LEDs show that the system is missing a bootable device Need some assistance identifying why the board would fail to POST with video connected. // Update // Using another Power Supply the system gets passed the fans ramping up and down twice. Video still does not display.

  Read the article

• Intel Rapid Start Driver Reinstallation doesn't work?

  - by elegantonyx

  I recently had to reformat my entire drive and reinstall Windows 7. Something that bothers me is that when I was downloading the Intel Rapid Start driver (I have a Lenovo Ideapad Y480, and it comes standard with the Rapid Start) and tried to install it, the installer claimed that my system did not meet the requirements in order to install, when it was previously installed by the OEM. My startup times have increased from 21 seconds to log-in screen to 50 seconds. Please help... Specs: Lenovo Ideapad Y480 Intel Core i7-3610 Ivy Bridge (quad-core) Nvidia Geforce 640M LE with 2gb VRAM 8GB RAM 1TB hard drive, 32 GB SSD (OEM installed)

  Read the article

• HDMI and DVI connected monitors not in dual view on Windows 7 (Intel onboard Gigabyte)

  - by Nux

  I have a HDMI to DVI cable which is connected to one monitor (HDMI is on PC side) and DVI-DVI connected to other monitor. This seems to work up until the system is fully loaded (the startup logo animation is shown on two screens). When and after I log in only one monitor is active (HDMI-DVI). I'm also unable to detect the other monitor (DVI-DVI). Any ideas what might be wrong with the setup? Also when I uninstall the Intel Graphics driver both screens are on, but only duplication works. GA-Z68A-D3H-B3, Intel Z68 Chipset, with fresh VGA driver (15.26.1.64.2618).

  Read the article

• Intel hybrid graphics stuck in power save mode

  - by OZZIE

  I have an Asus UL30V with Intel hybrid graphics. When I bought it it used to switch to turn of the better graphics card to save power and run on a more power effecient one. When I connected the laptop to a power source again I could go to the intel graphics icon on the task bar and click on "switch to enhanced performance mode" or something similar. But like 2-3 months ago it suddenly vanished. I cannot switch modes anymore, it's gotten stuck in power save mode. I can change the windows power setting but that doesn't enable the better graphics card :( What should I do? I've tried restarting the computer and that does not work. I really hope I don't have to reinstall the drivers! It seems like other people have had the same issue: http://en.community.dell.com/support-forums/laptop/f/3518/p/19422695/19994601.aspx , he hasn't even got the same computer as me. I have windows 7 Home Premium x64 Any ideas?

  Read the article

• Where can i get the motherboard cd's

  - by Velmrugan

  Hi, Can you please tell me where can i get the mother board softwares for my intel celeron processor. I need Audio driver, Graphics & windows installer for my Intel celeron processor. Where can i download all these softwares, freely. I searched in Intel homepage but i cant find what and all to download, So please can u tell me briefly how to download these files. Regards, Velmurugan

  Read the article

• Strange Ubuntu Random Display [Video]

  - by d4v1dv00

  I had this random display issue ever since Ubuntu 11.04 and now running Ubuntu 11.10 and this problem still persist. It is very hard for me to explain, so I uploaded a video to elaborate itself. Before I convert from Windows 7, this issue never happened. The symptom is so random that I cannot reproduce or tell precisely when will this happen again. My wild guess is, should this be related to driver? Below are my detail system information: $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation H67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57788 Gigabit Ethernet PCIe (rev 01) is there any other information i need to post and how do i do that?

  Read the article

• How to use integrated Intel graphics instead of Nvidia graphics on MacBook Pro?

  - by Benjamin Geese

  I am running Ubuntu 12.04 64bit on MacBook Pro 15" 2010 (MacBookPro6,2) and I would like to use the integrated Intel graphics instead of the dedicated Nvidia graphics Ubuntu boots with on this machine. I am booting with UEFI, not REFIT or similar. I managed to switch to UEFI with the help of this page. This wiki page also contains tips on switching to Intel graphics which include some (for me) cryptic boot commands to grub. However if I follow the guide, my display stays just black. Currently, I am only looking for solution to use Intel graphics for Ubuntu to save power and keep my MacBook cool. Dynamic switching or stuff like that is not required.

  Read the article

• How to use only intel graphics and power off radeon?

  - by luizrogeriocn

  I've been using Linux for quite a while in everyday computing and programming. But now i got this new laptop with amazing battery life on windows which runs pretty cool even while gaming. But for some reason on Ubuntu I get like 1/3 battery life and it gets hot even while browsing the web. I have the proprietary drivers for radeon, but I'm thinking about upgrading from Ubuntu 12.04 to 14.04, and I would like to know how can I use only the Intel graphics and have radeon always turned off? Since I do not need the discrete graphics on Ubuntu and I'm pretty sure my problem is related to the radeon sucking up my battery and generating heat. My laptop technical specifications are: Dell latitude 3540 Intel core i7 4500U (with Intel hd4400 graphics ) Ati Radeon HD 8850m with 2GB GDDR5 VRAM 8 GB DDR3L @1600mhz Toshiba 256gb SSD Ubuntu 12.4.3 If you need any additional info, please tell me :)

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >