Search Results

Search found 4066 results on 163 pages for 'intel x25'.

Page 5/163 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

    - by el10780
    After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

    Read the article

  • What does the "Max Memory Size" on the new Intel Core i3 / i5 / i7 CPU's mean?

    - by Josh
    I just noticed in the specs of the new Intel Core i-series processors that there is a "Max Memory Size" that is usually pretty small -- anywhere from 8GB to 24GB. See here: http://ark.intel.com/Product.aspx?id=41316 Core 2-based motherboards were just starting to roll out support for 32GB and greater memory sizes. Anyone have any idea what the Max Memory Size indicates? Is this the total limitation of the on-chip memory controller? Limitation per channel? Limitation per stick (e.g. density??)? Thinking of building a decent machine that needs lots of RAM, so I'm looking at the i7 860.

    Read the article

  • How to determine if a device is SATA driven and will be affect by the Sandy Bridge Intel Issue?

    - by joelhaus
    Looking to buy a higher-end Windows 7 laptop, but I'm concerned about the issue with the Intel Sandy Bridge chipset. Otherwise, my price range covers laptops within the latest (Sandy Bridge) generation of the Core i7 family. I understand that there is an issue with SATA ports 2-5 and I use a Windows Home Server over a WiFi connection to share files and backup my PC. The other storage devices that I will use (less frequently) are the built-in DVD-RW disc drive and various devices hooked up to the USB ports (i.e. Android devices, iPod, etc.). The question: Will this setup be negatively impacted by the problem Intel reported about Sandy Bridge? Given this information, is it unwise to purchase a laptop that has this flaw? I really don't know how to determine whether a device is SATA driven or not, so hoping someone can shed some light on this too. Thanks!

    Read the article

  • Intermittent sound on an Medion Akoya S5610

    - by ej159
    The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

    Read the article

  • Intermittent sound

    - by ej159
    The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

    Read the article

  • Intel z77 vs h77 for intensive compiling, gaming [closed]

    - by Bilal Akhtar
    I'm in the market for a desktop motherboard (preferably ATX) that functions well with Intel i7-3770 Ivy Bridge processor at 3.4 GHz with LGA1155 socket. That processor is very fast, and it should handle all my tasks. My question is about the type of motherboard chipset I should choose to accompany it. I plan to use my rig for compiling and developing Debian package and other OS components, web development, occasional Android apps, chroots, VMs, FlightGear, other gaming but nothing serious, and heavy multitasking, all on Ubuntu. I do NOT plan to overclock, and I never will, so that's not a cause of concern for me. That said, I'm down to three chipset choices: Intel H77 Intel Z68 Intel Z77 I'm planning to go for H77 since I don't need any of the new features in Z77. I don't plan to use a second GPU and I will never overclock my CPU/GPU. My question is, will H77 based MoBos handle all my tasks well? Intel advertises that chipset as "everyday computing" but other sites say it's base functionality is the same as Z77. Intel rather advertises Z77 for "serious multitaskers, hardcore gamers and overclocking enthusiasts". But the problem with all Z77 motherboards I've seen is, they're way too expensive and their main feature seems to be overclocking, which won't be useful to me. Will I lose any raw CPU/GPU performance or HDD R/w with the H77 when comparing it to a Z77? Will heat, etc be an issue too? From what I've seen, Z77 motherboards have larger heat sinks when compared to H77 ones. Will that be an issue too, if I go with an H77 motherboard with no heat sinks for the chipset? The CPU will have a fan in both cases, of course. tl;dr When it comes to CPU/GPU performance and HDD r/w, is the Intel H77 chipset slower than the Z77? I don't care about overclocking or multiple GPUs, and for the processor, I'm set on Ivy Bridge i7-3770.

    Read the article

  • Experience with Intel X25-M 160GB and Oracle

    - by derobert
    We're considering building an Oracle database with 12 Intel X25-M G2 160GB drives in software RAID10. It'd be running Linux. Database gets some very heavy write activity during the early morning data load, other than that it is mostly read-only (and the read load is fairly minimal). We're currently running on 11 150GB Velociraptors (also Linux software RAID10), and are hoping the X25-M will speed up the data load. We currently have redo on different disks than the rest of the data. I'm wondering a few things: Any experience with using X25-M drives for databases? The X25-E are unfortunately beyond our budget. Would it hurt to separate redo off to some magnetic (non-SSD) drives, say 2 (raid1) or 4 (raid10) Seagate Constellations?

    Read the article

  • Intel Extreme Tuning utility options are greyed

    - by Abhishek Sha
    I'm having a ASUS K55VM with Intel Core i7 3610QM (IvyBridge) with a NVIDIA GT630M. I'm trying to operate the Intel XTU, but as you can see in the screenshot, all the options are greyed out. Can you please help with this situation. Another are is the CPU Throttling (Intel SpeedStep) which is always shown as 0%. But in the Intel Turbo Monitor, the Speed keeps dynamically changing. Then why is the CPU Throttling always at 0%?:

    Read the article

  • Realtek/Intel NIC transfer speed

    - by thepurplepixel
    I have just purchased a Gigabyte GA-X58A-UD7 motherboard, and it has dual Realtek RTL8111D gigabit LAN ports. I also have an Intel PRO/1000 MT PCI gigabit network card lying around from an old desktop. I've heard that Intel PCI-E network cards will often outperform Realtek, Marvell, or other non-Intel on-board network adapters, but my question is will the PRO/1000 MT PCI card outperform a single Realtek RTL8111D gigabit network adapter in terms of transfer speed, or should I keep what I have/buy a PCI-E Intel network adapter?

    Read the article

  • Installing Intel Iris Drivers on Parallels 9

    - by Eren Yildirim
    I'm running windows 8.1 on Parallels 9 on Mac OS X 10.9.3 Mavericks. Before that I used to have VMWare and I could manage to install Intel Iris drivers for OpenCL SDK. But Parallels installs tools for virtualization I guess and in device manager I see Parallels Display Adapter (VDDM) instead of Intel Iris Graphics Processor. How can I see the device and be able to install latest Intel drivers so that I can Install Intel OpenCL SDK. Thank you.

    Read the article

  • 32-bit Ubuntu or 64-bit w/Intel Atom D510 w/4GB RAM?

    - by T.J. Crowder
    (I've seen this question and some related ones, and perhaps this is a duplicate although part of my question is specific to the Atom D510.) I'm going to be installing Ubuntu on a new silent desktop as my latest (and hopefully last) attempt to switch from Windows to Linux for at least most everyday tasks. The new machine is entirely passvely cooled, but as a consequence, not astonishingly powerful — an Atom D510 (dual-core, 1.6GHz, HT) on Intel's D510MO board. That's fine, I won't use it for gaming, (much) video editing, etc. It's a 64-bit processor and I'm maxing the board out at 4GB of RAM (hey, that 1.6 CPU needs all the help it can get), which naturally raises the question of whether to install Ubuntu 64-bit or 32-bit (and if the latter, either live with the missing RAM, or do the PAE kernel dance). Although I've used Linux on servers for years, I'm very nearly a Linux desktop newbie and am not currently in the mood to fight driver wars and such. So if I'm setting myself up for failure with 64-bit, I'll live with the missing ~0.8GB or fiddle with PAE. But if 64-bit is entirely "ready," great, I'm there. So: Do most mainstream apps (now) play nicely with 64-bit Linux? I can't help but notice the "AMD" in the ISO image filename ubuntu-10.04-desktop-amd64.iso and I know AMD lead the way on this stuff — does Ubuntu 64-bit play nicely with Intel processors? Just generally, would you recommend one or the other? (And if anyone has any experience with Ubuntu specifically on the D510 [32-bit or 64-bit] which might lead me one way or t'other, that would be useful.) Thanks in advance.

    Read the article

  • how to get adobe flash fullscreen video fluid with an atom processor?

    - by Antoine Rodriguez
    My system has an atom N270 + intel i915 graphic card. Under Windows I can enjoy 720p bigbuckbunny youtube video fullscreen without any trouble. Under Ubuntu 12.04 I have laggy and choppy fullscreen video and choppy video when not fullscreen. I've seen that under ubuntu the cpu is almost always at 100% use. What I must do in order to have videos playing well under ubuntu ? I've already tried the following : Force flash gpu detection : (no result) : mkdir /etc/adobe echo "OverrideGPUValidation = 1" | sudo tee -a /etc/adobe/mms.cfg grub options (had results but not enough) : i915_enable_rc6=1 i915_enable_fbc=1 i915_lvds_downclock=1 pcie_aspm=force updated intel drivers (glasen ppa) Using chrome instead of firefox (had impact but not enough)

    Read the article

  • That pestky Intel Centrino wireless N + WiMAX 6150 wireless card

    - by newb26
    I'm new to linix and just got Ubuntu up and running on my ASUS laptop last night. Aside from the wireless everything seems to be working. The card is able to recognize networks but cannot make a full connection. After I enter my password it will try to connect before asking for the password again after a few minutes. I know the issue isn't the password because I checked that I had the right one. I've done some poking around trying to find a way to get it work. Linix recognizes the card as well. I found a link to some drivers in a question someone had about a WiMAX 6250 card and am curious if anyone knows if they would also work for the 6150 I have in my machine: https://github.com/ago/wimax-tools If not what can I do?

    Read the article

  • Unity 3D not Working on Acer D270 w/ Intel GMA 3600

    - by amol.kamath
    I recently bought myself an Acer Aspire One D270 with the GMA 3600 graphics chipset thinking I would get some lovely graphics. However, I am stuck using Unity 2D and I cant figure out how to enable 3D. None of the fixes I have found so far have worked. Another effect of this is that I cant change the backlight brightness. So whenever I open the lid, looking at the screen is like staring into the sun. Is there a driver for it in the works? Does the 3.4 kernel support the chipset and most of all is there a way to fix this? Please help

    Read the article

  • WIFI card intel r 2200 will not work

    - by Telemarkhero
    I have installed 12.04 on a Fujitsu Siemens Amilo Pro. Wifi card does not work. Have tried various threads but none have the same problem. Think I have the correct firmware but the following comes up: gill@ubuntu:~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11bg ESSID:off/any Mode:Managed Channel:0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power=off Sensitivity=8/0 Retry limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. Also gill@ubuntu:~$ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes There is a power switch for wifi but it does not do anything in Ubuntu. Any pointers greatfully received.

    Read the article

  • Intel Graphic card problem

    - by user10406
    Hello, I am facing a problem in installing the right driver for my computer "HP dv4 2154ca" The problem that I tried to install it couple of times but the xorg.conf file is still empty no matter what So my question is why is this file empty and how could I generate it correctly for my device The problem that I think this thing is causing is that when I maximize flash to full screen it lags the video will go slower while the sound will go smooth Thanks in advance

    Read the article

  • Install Intel USB 3.0 eXtensible Host Controller Driver for Windows Server 2008 R2 x64

    - by ffrugone
    According to Intel and Dell, by board is technically a 'desktop' board and they therefore do not support Intel USB 3.0 eXtensible Host Controller drivers for Windows Server 2008 (R2 x64). I'm trying to find a workaround. I found an entry on someone who tried to tackle this, but I can't make his fix work for me. Below, I have copied both his entry, and my reply. I'm a loyal stackoverflow user, and hopefully the people here at serverfault can help me: anyforumuser Re: GA-Z77X-UD5H USB3 Drivers not installing? « Reply #6 on: July 05, 2012, 04:12:59 am » Thanks to JoeMiner , his process for the network drivers gave me the clues to figure out to get the USB3 drivers working. I have got the intel USB3 drivers working at full speed in win server 2008r2 you have to edit the following file : 1. mup.xml in change the "Windows7" to "W2K8" 2. in setup.if2 under [groups] line starting with "HSCSDRIVER " change the "IsOS( ... )" entry to "IsOS(WIN2008_R2,WIN2008_R2_MAXSP)" inf files for all copy the content of the [Intel.NTAMD64.6.1] group to the [Intel.NTAMD64.6.2] group driver folders. here i am not entirely sure which is correct so there are some double up's. in the drivers folder copy the "Win7" folder to "win2008" , "win2008_r2" and "x64" ie your drivers folder should now contain the "win2008" , "win2008_r2" and "x64" folders and they contain contents of the win7 folder (the inf files should of already been fixed) Run install , It should install properly and work now. You will have to reboot If it doesn't work remove the intel usb3 controllers from device manager and get it to "scan for hardware changes" Good luck !!! benevida Re: GA-Z77X-UD5H Intel Network Drivers not installing? « Reply #7 on: August 13, 2012, 02:21:14 pm » Thank you anyforumuser! A process for getting this driver installed was exactly what I needed. However, I've hit a snag. I believe I've followed every step exactly as written, but I'm getting an error during installation. I get the message "One or more files that are required for installation are either missing or corrupted. Setup will exit." Behind the error, the 'Setup Progress' shows the current step as "Copying File: C:\Program Files (x86)\Intel\Intel(R) USB 3.0 eXtensible Host Controller Driver\Drivers\iusb3xhc.man". I've checked the installation files, and iusb3xhc.man seems to be a viable file in all of the Windows 2008 sub-directories of the Drivers folder. Therefore I don't see how the file could be missing and I doubt that it is corrupted, (although it does NOT exist in the \Drivers\HCSwitch folder). I opened 'Setup.if2', and there are two aspects to the step of copying iusb3xhc.man that caught my eye. First, the steps immediately preceding are set to 'error=ignore'. If they hadn't completed successfully, this is the first step where we'd hear about it. Second, this is the first step where the relative path '%source%\drivers\%_os%\%_ia%\' is used. If I haven't named the Windows 2008 sub-directories correctly, I could see where things are fouling up. In any event, if someone could take a look and make suggestions I'd appreciate it. Thank you.

    Read the article

  • Screen flickers after resuming from hibernate with Intel GMA 3600 (Acer D270 with Intel N2600)

    - by Cameron
    Fresh system install, with correct display driver from Intel (8.14.8.1065). Clicking "Update driver" merely results in a message saying the driver was already up-to-date. After resuming from hibernate the entire screen flickers. This is especially noticeable while using IE9 (which has hardware acceleration enabled by default) on Google maps, in particular while typing in an address in the map search field (the flickering is much worse under these circumstances). Note that sleep worked fine, only hibernate causes this issue. Restarting "fixes" the problem temporarily until the next hibernate-resume. Aero is enabled. This is on Windows 7 (Pro) 32-bit, on an Acer Aspire One D270-1998, with the Intel N2600 (which has the Intel GMA 3600 built-in).

    Read the article

  • Intel I217LM ethernet controller not detected by Ubuntu 12.04LTS

    - by Alexandr Kurilin
    My last installation of Ubuntu 12.04 on a machine using an ASUS Q87M-E motherboard with an Intel I217LM Ethernet controller has failed to detect the ethernet card. The only thing displayed by ifconfig -a is the loopback. I double-checked in the BIOS, and the controller should be online. $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lspci 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation Lynx Point KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation Device 153a (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point HD Audio Controller (rev 04) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-Port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) $ lsmod Module Size Used by vesafb 13844 1 snd_hda_codec_realtek 224173 1 arc4 12529 2 joydev 17693 0 usbhid 47238 0 hid 99636 1 usbhid rfcomm 47604 0 rt73usb 31735 0 crc_itu_t 12707 1 rt73usb rt2x00usb 20808 1 rt73usb rt2x00lib 55326 2 rt73usb,rt2x00usb mac80211 506862 2 rt2x00usb,rt2x00lib cfg80211 205774 2 rt2x00lib,mac80211 eeepc_wmi 13109 0 bnep 18281 2 asus_wmi 24456 1 eeepc_wmi sparse_keymap 13890 1 asus_wmi psmouse 97485 0 bluetooth 180153 10 rfcomm,bnep ppdev 17113 0 snd_hda_intel 33719 6 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi serio_raw 13211 0 snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 32866 1 snd 79041 21 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device video 19651 0 soundcore 15091 1 snd wmi 19256 1 asus_wmi snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp $ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1091 errors:0 dropped:0 overruns:0 frame:0 TX packets:1091 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:80048 (80.0 KB) TX bytes:80048 (80.0 KB) wlan0 Link encap:Ethernet HWaddr 00:fd:07:91:a8:b9 inet addr:172.16.42.4 Bcast:172.16.42.255 Mask:255.255.255.0 inet6 addr: fe80::2fd:7ff:fe91:a8b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:56644 errors:0 dropped:0 overruns:0 frame:0 TX packets:36417 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:85270918 (85.2 MB) TX bytes:3413849 (3.4 MB) additionally, running sudo lshw -C network returns: *-network UNCLAIMED description: Ethernet Controller [...] I'm pretty stumped at this point. This doesn't sound like a very uncommon ethernet controller and I figured it would be picked up by the system. Does anybody have advice for how to deal with this? Anything specific I should look into to figure out what could be causing this? Edit: It seems that following the guide on the Intel e1000e drivers page allowed the card to start working. Is this a real fix or is there a better way?

    Read the article

  • Wireless internet is connected to an open network but has no internet

    - by Joshua Reeder
    I just installed Ubuntu on my laptop yesterday and it connected to the wireless fine. Then I took it to school, put it on their wired connection, downloaded some stuff, and now the wireless doesn't work. At first it would detect networks, but not connect. I restarted it and now it can connect, but it acts like it doesn't have internet in the browser. Wired connection still works fine on it. I know it isn't the network because my ipad is working on the wireless connection fine. I found another solution on here switching the security settings for the wireless, but this is the apartment's wireless so they have it open, and I won't be able to mess with it at all. Here is lspci output: 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 310M] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) 16:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 20) 16:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 20) 16:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 20) 16:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 20) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04) ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04) ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04) ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04) ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04) ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04) ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04) ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04) ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04) ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04) ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04) ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) Update: I re-installed Ubuntu 12.04 (I assumed I messed something up while toying with it) but it did not solve the problem. Eventually, I got it to work with my school's wireless internet (the default network settings were wrong), but the internet still doesn't work on my apartment's wifi (it has no security on it).

    Read the article

  • xrandr shows two displays (LVDS1), but how can I use VGA1 only?

    - by Tom Fishman
    We're running Ubuntu 11 on this hardware: Foxconn R20-D2 Intel Atom D510 Intel NM10 Intel GMA 3150 Barebone There is no integrated display (it is a barebone box). I connected an external VGA to it. However xrandr shows two displays: Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 519mm x 324mm 1920x1200 60.0 + 1600x1200 60.0 1680x1050 60.0 1280x1024 76.0 75.0 72.0 60.0 1440x900 75.0 59.9 1152x864 75.0 1024x768 75.1 70.1 60.0* 832x624 74.6 800x600 72.2 75.0 60.3 640x480 72.8 75.0 66.7 60.0 720x400 70.1 But I don't have two displays. How can I get rid of LVDS1 and use only VGA1? The direct result is that I'm seeing a 1024x768 resolution on my VGA display, because the OS is using "mirror" mode which uses the lower resolution of the two. Turning off the mirror is not a solution. I want to fix it. Related logs: ... [ 20.019] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 20.019] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 20.019] (==) intel(0): RGB weight 888 [ 20.019] (==) intel(0): Default visual is TrueColor [ 20.019] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G [ 20.019] (--) intel(0): Chipset: "Pineview G" [ 20.019] (**) intel(0): Relaxed fencing enabled [ 20.019] (**) intel(0): Wait on SwapBuffers? enabled [ 20.019] (**) intel(0): Triple buffering? enabled [ 20.019] (**) intel(0): Framebuffer tiled [ 20.019] (**) intel(0): Pixmaps tiled [ 20.020] (**) intel(0): 3D buffers tiled [ 20.020] (**) intel(0): SwapBuffers wait enabled [ 20.020] (==) intel(0): video overlay key set to 0x101fe [ 20.020] (II) intel(0): Output LVDS1 has no monitor section [ 20.020] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight [ 20.080] (II) intel(0): Output VGA1 has no monitor section [ 20.080] (II) intel(0): EDID for output LVDS1 [ 20.081] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) ... [ 20.082] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 20.082] (II) intel(0): Printing probed modes for output LVDS1 [ 20.082] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 20.082] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 20.082] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 20.082] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.149] (II) intel(0): EDID for output VGA1 [ 20.149] (II) intel(0): Manufacturer: BNQ Model: 771b Serial#: 6595 [ 20.149] (II) intel(0): Year: 2008 Week: 16 [ 20.149] (II) intel(0): EDID Version: 1.3 [ 20.149] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V ... [ 20.152] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.152] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 20.152] (II) intel(0): Output LVDS1 connected [ 20.152] (II) intel(0): Output VGA1 connected [ 20.152] (II) intel(0): Using exact sizes for initial modes [ 20.152] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 20.152] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 20.152] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. ...

    Read the article

  • Display with intel integrated graphics, bitcoin mine with Radeon 6950

    - by karategeek6
    I'm on Ubuntu Linux 11.04 64 bit. I have an intel i5 with integrated graphics and a Radeon 6950, with one monitor. I would like to run my graphics on the integrated card, and run bitcoin mining on the 6950. I have bitcoin mining working when I use the 6950 for both display and mining. Every time I try and and use the integrated graphics instead, OpenCL doesn't recognize my 6950. Using aticonfig --initial when using the integrated graphics for display breaks things. So I used the xorg.conf it created as a basis and tried to manually edit it. I really don't know what I'm doing, though. My last attempt is given below. The graphics ran off the integrated card, but the 6950 wasn't recognized. Any help would be greatly appreciated! xorg.conf: #Section "ServerLayout" # Identifier "Intel Layout" # Screen "Default Screen" # Identifier "aticonfig Layout" # Screen "aticonfig-Screen[0]-0" # Screen 0 "aticonfig-Screen[0]-0" 0 0 #EndSection Section "Module" Load "glx" EndSection # Intel Section "Device" Identifier "Intel Integrated Graphics" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Monitor" Identifier "Default Monitor" Option "VendorName" "Monitor Vendor" Option "ModelName" "Monitor Name" Option "DPMS" "true" EndSection Section "Screen" Identifier "Default Screen" Device "Intel Integrated Graphics" Monitor "Default Monitor" DefaultDepth 24 EndSection # ATI Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Recommended CPU upgrade for Dell Vostro 220 with Intel E7300 processor?

    - by Justin Grant
    I've got a Dell Vostro 220 with an E7300 processor (Intel Core 2 Duo @ 2.66Mhz, LGA775 socket) and I'm thinking about upgrading my processor so I can run Windows Server 2008 R2 with Hyper-V, which requires Hardware Virtualization support in the processor. Yes, I know this is underpowered for a server, I'm actually using it as a desktop machine but I'd like to use Hyper-V instead of Virtual Server (which I'm using now for running VMs). I'd like to keep the same motherboard and ideally the same CPU fan and RAM too. Any suggestions for a good, relatively cheap (under $200) processor upgrade?

    Read the article

  • How do I get wireless and video working on a Sony Vaio vpc-z21x9r

    - by Alex
    OS: Ubuntu 11.10 Kernel: 2.6.37.6 Laptop: sony vaio vpc-z21x9r The problem: I can't change level of screen backlight; also can't enable wi-fi. While using 3.0 kernel everything is ok, but the laptop discharges too quickly. Results for lspci 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 5f) VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) there is no wlan0 in ifconfig -a too. I've fount that kernel should already have drivers for this graphics controller, but when i load up in restore mode, it writes "fall" while trying to load up some video drivers. To change the level of backlight i've alrady tried: xbacklight -set XX , smartdimmer -s XX and got this init_ nvclock() failed! also sudo setpci -s 00:02.0 F4.B=XX with no results. As for wi-fi, i've found driver but i don't understand how to install it. Here it is How can I fix these problems? Thank you for your help and time! Also tried to fix problems with backlight writing GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset acpi_backlight=vendor Still no results. Is there any sense in recompiling kernel, I mean 2.6.37.6. Can it make any improvements in the situation?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >