Search Results

Search found 5816 results on 233 pages for 'joe black'.

Page 7/233 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Pendrive USB Ubuntu installation - black screen on boot

  - by ubuntico

  I see many posts on this, but no solution. I installed Ubuntu 12.04 on my 16GB USB flash drive using this official link using their tool Universal USB Installer. Installation to USB went fine so I set my laptop to boot from USB and the Ubuntu was recognized. I saw the usual boot screen and I chose option "Run Ubuntu from this USB". The boot process started and after 5-6 seconds the screen goes black and non-responsive. I thought that it hang on X loading so I tried switching to console via Ctrl+Alt+F1-6 but the system did not respond. Why is this happening? Am I doing something wrong? PS. My laptop is HP Pavillion G6

  Read the article

• Ubuntu 12.04 LTS - Black Screen at boot After changing Nvidia Driver

  - by nDman

  2 days ego i updated my Ubuntu 12.04 LTS to latest updates but i ignored Grub Updating because I thought it will clear my grub settings (I'm so noob!). After restart every things was right, the Ubuntu started normally and every things was working well except graphic which had problem before update. I had the experimental driver before but I changed it to the current-update version. After restart Ubuntu stock on black screen. I tried to reinstall Nvidia driver from recovery but it not worked. Then i used Update Grub in recovery, it not worked too but i see this line on screen at boot: at this time it stops and keyboard not working, but when I push the power button it shows these lines and it will shutdown. OK finally I made it start with older kernel (3.5.0-28-generic). Now how can I keep this kernel or fix Ubuntu to work with new kernel? Should I reinstall Nvidia driver? Which version should I use?

  Read the article

• Print to file in Black and White [not printer specific]

  - by user2413

  Hi all, I have these pdf files of c++code and they are colored which would be cool, except that the network printer here is b&w and the printed out codes come in various shades of pale grey which makes them essentially unreadable (specially the comments). I would like everything (text, codes, commands,...) to be printed in the same (black) color. i've tried fuddling with the printer's properties, but the closest thing i see is the 'level of grey' tab, and there i have the choice between 'enhanced' and 'normal' (and it doesn't make a difference in my case). i've tried 'print to file', but i don't see any options there to print to b&w, I've tried installing the 'generic cups printer', but again no options to print to b&w. any idea ? (i'm on 10.10)

  Read the article

• Transparent parts of texture are opaque black instead

  - by Aaron

  I render a sprite twice, one on top of the other. The sprites have transparent parts, so I should be able to see the bottom sprite under the top sprite. The transparent parts are black (the clear colour) and opaque instead though and the topmost sprite blocks the bottom sprite. My fragment shader is trivial: uniform sampler2D texture; varying vec2 f_texcoord; void main() { gl_FragColor = texture2D(texture, f_texcoord); } I have glEnable(GL_BLEND) and glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA) in my initialization code. My texture comes from a PNG file that I load with libpng. I'm sure to use GL_RGBA when initializing the texture with glTexImage2D (otherwise the sprites look like noise).

  Read the article

• Black screen on boot. FailsafeX: "Screen not found"

  - by Lindhe94

  I made a regular update using update center yesterday on My Samsung NP730U3E with Ubuntu gnome 13.10 and today it won't start. Or rather: it just gives me a black screen. On start up I get to enter my encryption password and everything seems fine. But after the encryption password is accepted it just blanks out. When I boot into recovery mode and try to boot failsafeX it returns "Fatal server error: (EE) no screens found (EE)" After booting into recovery mode and "Resume normal boot" I get to the tty1 prompt. If I head over to "tty7", where the graphical things usually are going on I just see this (and it's frozen): What to do?

  Read the article

• Print to file in Black and White (but not in greyscale) [not printer specific]

  - by user2413

  Hi all, I have these pdf files of c++code and they are colored which would be cool, except that the network printer here is b&w and the printed out codes come in various shades of pale grey which makes them essentially unreadable (specially the comments). I would like everything (text, codes, commands,...) to be printed in the same (black) color. i've tried fuddling with the printer's properties, but the closest thing i see is the 'level of grey' tab, and there i have the choice between 'enhanced' and 'normal' (and it doesn't make a difference in my case). i've tried 'print to file', but i don't see any options there to print to b&w, I've tried installing the 'generic cups printer', but again no options to print to b&w. any idea ? (i'm on 10.10)

  Read the article

• Installing Ubuntu 13.10 'Saucy Salamander' on L75D-A7280 hangs on a black screen

  - by Riven

  Trying to get Ubuntu 13.10 to work and it will not. Seen that somebody is having a similar problem, some things failing then it just hangs on a black screen (after pressing F1 to see what it's doing). My system is a Toshiba Satellite L75D-A7280, and I have tried two different files that I had downloaded from Ubuntu.com with no luck. My laptop came with Windows 8 and following the dual-boot directions Ubuntu 12.04 was installed and worked perfect, except for completely obliterating Windows 8 and voiding my warranty, meaning neither Toshiba nor the retail center I bought my system from can help me legally, besides giving advice... nor can I return it to get a non-UEFI based system. I really need to figure this out, I am a student and need my laptop working properly with any OS I put on it. Will continue searching for any information I can find.

  Read the article

• Black screen with blinking cursor after dual boot install 14.04

  - by chillstream

  I have just installed Ubuntu 14.04 on my toshiba laptop along side Windows 7. When the menu comes up to choose which OS to boot into, I can easily boot into Windows 7. I cannot successfully boot into Ubuntu. All I get is a blinking cursor on a black/purple screen. I attempted the nomodeset trick, which was a bit more successful. I got a screen with a lot of code, but then it stopped with a blinking cursor at the bottom and wouldn't load anymore. As a last resort, would returning my laptop to factory settings get rid of linux and the partitions made to the drive? I already did this to my laptop when it was just windows, which is why I thought I might as well try to add Ubuntu. But it's a lengthy process, and if it won't get rid of the partitions and ubuntu, I won't bother. I appreciate any help ~many thanks

  Read the article

• Black screen on Ubuntu 12.04

  - by user1648371

  I've just upgraded to Ubuntu 12.04 and I'm experiencing some problems. The first thing I noticed is that when I click the Workspace switcher all I get is a black screen (I can guess where the different workspaces are located and clicked on them, not a practical solution though). In addition when I lock the screen or suspend the laptop (a Vaio VPCEB4M1E) I get a shifted screen (I see the right most vertical stripe on the left size of the monitor and nothing about all the rest, to put it clearly I can see the gear that allows me to turn the pc off, etc, but not much more..) when I go to the additional driver menu I see the "ATI/AMD proprietary FGLRX graphics driver" are installed and the post-release update version is available. I don't know if the problem is driver related, so before doing anything I'd like to get some suggestions from you guys. Thanks you!

  Read the article

• Green flickering pixels that move with black images

  - by user568458

  Strange question... Occasionally, on my LCD screen, pixels that should be black flicker rapidly and constantly between black and green, about 4 flickers a second. The crazy part is, unlike dead/stuck pixels, they are relative to content on the screen and move with it. For example, I might be looking at a web page with a picture that has lots of black. There might be a couple of green flashing pixels in that black that shouldn't be there. I scroll the page, and the green flickering pixels move with the image. It seems that everyphysical pixel is fine, but somehow something interprets part of the image in a way that causes flickering green... It's not just in a web browser. My first thought was to blame a trolling blogger cunningly uploading an animated gif that simulates a failing pixel... but it happens in a wide range of applications. It seems to occur randomly, other than that it seems to only occur in areas of pure black, and it's always pure 100% green. It happens rarely enough that it's not a big deal, but it's such a strange problem it bugs me. I can't find any info on anything like this. I'm not even sure if it's hardware or software. Any ideas? (windows 7 laptop connected to LCD by DVI to HDMI cable)

  Read the article

• How to solve my black screen at boot?

  - by Juanillo

  I've got a friend with a weird problem. When he starts his computer the screen is completely black until the computer is completely started. So the screen is black until it suddenly shows the Windows desktop. He said that this is happening since a technical service repaired his computer, but that repair is not now in warranty. Recently the computer stopped working, but as the screen is black he cannot access to BIOS or start in safe mode (by pressing F8). When he inserts the Windows Vista DVD the system doesn't boot from DVD (it mustn't be configured in this way in the BIOS). Maybe there´s a problem with the hardware (maybe the graphic card)? Can anyone explain a reason why the screen is black during start-up? Any idea of what to do with the computer to restore it?

  Read the article

• Black screen during startup

  - by Juanillo

  Hello, I've got a friend with a weird problem. When he starts his computer the screen is completely black untile the computer is completely started. So the screen is black until it suddenly shows the windows desktop. He said that this is happening since a technical service repaired his computer, but that repairment is not now in warranty. Recently the computer stopped working, but as the screen is black he cannot access to Bios or to secure start-up (by pressing F8). When he inserts the Windows Vista DVD the system doesn't boot from DVD (it musn't be configured in this way in the Bios.) Maybe there´s a problem with the hardware (maybe the graphic card). Can anyone explain a reason why the screen is black during start-up? Any idea of what to do with the computer to restore it? Thanks.

  Read the article

• The Latest Dish

  - by Oracle Staff

  Black Eyed Peas to Headline at Appreciation Event If you're coming to OpenWorld to fill up on the latest in IT solutions, be sure to save room for dessert. At the Oracle OpenWorld Appreciation Event, you'll be savoring the music of the world's hottest funk pop band, Black Eyed Peas, plus superstar rock legends Don Henley, of the Eagles, and Steve Miller. Save the date now: When: Wednesday, September 22, 8 p.m-12 a.m. Where: Treasure Island, San Francisco OpenWorld's annual thank-you event will be our most spectacular yet. Treasure Island, in the center of scenic San Francisco Bay, will once again serve as a rockin' oasis for Oracle customers and partners as they groove to the beat and enjoy delicious food, drinks, and festivities. Get all the details here.

  Read the article

• Blank screen after installing nvidia restricted driver

  - by LaMinifalda

  I have a new machine with a MSI N560GTX Ti Twin Frozr II/OC graphic card and MSI PH67A-C43 (B3) main board. If i install the current nvidia restricted driver and reboot the machine on Natty (64-bit), then i only get a black screen after reboot and my system does not respond. I can´t see the login screen. On nvidia web page i saw that the current driver is 270.41.06. Is that driver used as current driver? Btw, i am an ubuntu/linux beginner and therefore not very familiar with ubuntu. What can i do to solve the black screen problem? EDIT: Setting the nomodeset parameter does not solve the problem. After ubuntu start, first i see the ubuntu logo, then strange pixels and at the end the black screen. HELP! EDIT2: Thank you, but setting the "video=vesa:off gfxpayload=text" parameters do no solve the problem too. Same result as in last edit. HELP. I would like to see Unity. This is my grub: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="video=vesa:off gfxpayload=text nomodeset quiet splash" GRUB_CMDLINE_LINUX=" vga=794" EDIT3: I dont know if it is important. If this edit is unnecessary and helpless I will delete it. There are some log files (Xorg.0.log - Xorg.4.log). I dont know how these log files relate to each other. Please, check the errors listed below. In Xorg.1.log I see the following error: [ 20.603] (EE) Failed to initialize GLX extension (ComIatible NVIDIA X driver not found) In Xorg.2.log I see the following error: [ 25.971] (II) Loading /usr/lib/xorg/modules/libfb.so [ 25.971] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 25.971] (==) NVIDIA(0): RGB weight 888 [ 25.971] (==) NVIDIA(0): Default visual is TrueColor [ 25.971] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 26.077] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [ 26.078] (EE) NVIDIA(0): check your system's kernel log for additional error [ 26.078] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the [ 26.078] (EE) NVIDIA(0): README for additional information. [ 26.078] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device! [ 26.078] (II) UnloadModule: "nvidia" [ 26.078] (II) Unloading nvidia [ 26.078] (II) UnloadModule: "wfb" [ 26.078] (II) Unloading wfb [ 26.078] (II) UnloadModule: "fb" [ 26.078] (II) Unloading fb [ 26.078] (EE) Screen(s) found, but none have a usable configuration. [ 26.078] Fatal server error: [ 26.078] no screens found [ 26.078] Please consult the The X.Org Found [...] In Xorg.4.log I see the following errors: [ 15.437] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 15.437] (==) NVIDIA(0): RGB weight 888 [ 15.437] (==) NVIDIA(0): Default visual is TrueColor [ 15.437] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 15.703] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0) [ 15.703] (--) NVIDIA(0): Memory: 1048576 kBytes [ 15.703] (--) NVIDIA(0): VideoBIOS: 70.24.11.00.00 [ 15.703] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 15.703] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 15.703] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 560 Ti at [ 15.703] (--) NVIDIA(0): PCI:1:0:0 [ 15.703] (--) NVIDIA(0): none [ 15.706] (EE) NVIDIA(0): No display devices found for this X screen. [ 15.943] (II) UnloadModule: "nvidia" [ 15.943] (II) Unloading nvidia [ 15.943] (II) UnloadModule: "wfb" [ 15.943] (II) Unloading wfb [ 15.943] (II) UnloadModule: "fb" [ 15.943] (II) Unloading fb [ 15.943] (EE) Screen(s) found, but none have a usable configuration. [ 15.943] Fatal server error: [ 15.943] no screens found EDIT4 There was a file /etc/X11/xorg.conf. As fossfreedom suggested I executed sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup However, there is still the black screen after reboot. EDIT5 Neutro's advice (reinstalling the headers) did not solve the problem, too. :-( Any further help is appreciated! EDIT6 I just installed driver 173.xxx. After reboot the system shows me only "Checking battery state". Just for information. I will google the problem, but help is also appreciated! ;-) EDIT7 When using the free driver (Ubuntu says that the free driver is in use and activated), Xorg.0.log shows the following errors: [ 9.267] (II) LoadModule: "nouveau" [ 9.267] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 9.267] (II) Module nouveau: vendor="X.Org Foundation" [ 9.267] compiled for 1.10.0, module version = 0.0.16 [ 9.267] Module class: X.Org Video Driver [ 9.267] ABI class: X.Org Video Driver, version 10.0 [ 9.267] (II) LoadModule: "nv" [ 9.267] (WW) Warning, couldn't open module nv [ 9.267] (II) UnloadModule: "nv" [ 9.267] (II) Unloading nv [ 9.267] (EE) Failed to load module "nv" (module does not exist, 0) [ 9.267] (II) LoadModule: "vesa" [...] [ 9.399] drmOpenDevice: node name is /dev/dri/card14 [ 9.402] drmOpenDevice: node name is /dev/dri/card15 [ 9.406] (EE) [drm] failed to open device [ 9.406] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 9.406] (WW) Falling back to old probe method for fbdev [ 9.406] (II) Loading sub module "fbdevhw" [ 9.406] (II) LoadModule: "fbdevhw" EDIT8 In the meanwhile i tried to install WIN7 64 bit on my machine. As a result i got a BSOD after installing the nvidia driver. :-) For this reason i sent my new machine back to the hardware reseller. I will inform you as soon as i have a new system. Thank you all for the great help and support. EDIT9 In the meanwhile I have a complete new system with "only" a MSI N460GTX Hawk, but more RAM. The system works perfect. :-) The original N560GTX had a hardware defect. Is is possible to close this question? THX!

  Read the article

• 12.10 Booting Into Variations Of Blank Screen

  - by user93954

  I've been running the Ubuntu 12.10 beta since about a month before the final release with almost no problems. However since the day of release (I'm assuming an update has caused this) I have had problems booting into the actual GUI interface. Trying to get it to work is just a case of hard shutting down until it works, but for most of the time I need to battle with various different kinds of black screens. These include a plain black screen, a flashing line and a flashing line that doesn't fit the resolution. Nine times out of ten the cursor will be displayed over these. It also sometimes manages to boot into Ubuntu, albeit text mode or sometimes it loads GRUB which it isn't setup to do. If anyone could help out with this it'd be great. I really, really don't want to have to go through yet another clean installation. Cheers.

  Read the article

• How can I fix broken i915 drivers for Intel GPUs?

  - by Alen Mujezinovic

  I've got troubles getting the i915 drivers to work correctly on my laptop (HP Pavilion DM4 2101ea). Specifically, the laptop screen goes black and stays black after the splash graphic when booting both from USB key and from harddrive. To get anything on to the display after the splash screen I have to boot either with acpi=off nomodeset i915.modeset=0 I'd rather not turn ACPI off because I like my fans spinning and nomodeset is a bit overkill, so for now I'm booting with i915.modeset=0. Unfortunately, this turns off KMS and my current maximum resolution on the laptop screen is fixed to 1024x768 instead of its real capability. When not setting any of the above boot flags and I plug in an external monitor, the external monitor works fine. When booting with the flags, the external monitor works fine too, but can only do 1024x768 and can't do anything else than mirroring the laptop display. I did upgrade the i915 drivers from 2.17 that ship with Precise to 2.19 which are the most recent ones but without luck of getting anything to display. Here's my lspci output: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 08:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) Here's lshw -C video *-display UNCLAIMED description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:c0000000-c03fffff memory:b0000000-bfffffff ioport:4000(size=64) Both outputs are generated after booting with i915.modeset=0. Here's a complete Xorg.log file from a boot into a black screen: https://gist.github.com/479ce06454e47d6123e1 The graphics card is a Intel HD 3000 integrated GPU. I've never had problems with Intel hardware on Ubuntu before so this is very surprising. If you could provide a method to make i915 work, suggest alternative drivers a way to boot with i915.modeset=0 but higher resolutions and KMS on or explain what is happening and how to fix it I'll give you an answer badge. :) Thanks

  Read the article

• Ubuntu Wubi Booting Problem

  - by D3s7

  i have a problem with my Ubuntu 12.04 Wubi installation, sometimes when booting, the computer will get to the purple screen without the Ubuntu logo, then will go to a black screen and then lots of white saccaged colors will appear and i will be taken to the login page. But sometimes, it just get stuck on the black screen and does nothing and i have to hard shutdown and retry it until it works. What may cause this problem and why? I can shutdown correctly. Thanks for helping. Edit: RADEON HD 7650M Graphic card with latest available Drivers on amd's driver download site (fglrx drivers caused shutdown problems so i removed them). Screen resolution is 1600x900.

  Read the article

• Dead (nearly blank) laptop screen, secondary screen works - how to fix?

  - by LIttle Ancient Forest Kami

  My laptop screen is black while my secondary screen is fine. What I tried: setting brightness (Fn keys) - no effect, no change seen, also on secondary screen removing static electricity like suggested here - no effect restarting / charging battery, running on battery / "wall" power - no effect as well wait to see if warming it up helps - it doesn't follow official Ubuntu diagnostics - checking now... What I will try next: check last updates I've made IIRC I am running on nomodeset already, but can't recall how to verify this Further symptoms: can't see BIOS screen system loads and works fine, just screen has problems screen works (occasionally I could glimpse very dimly what was going on, but it was like with minimum brightness set - nearly non-distinguishable from just a black screen) Any ideas how to proceed best? What is most probable cause?

  Read the article

• Using the JRockit Flight Recorder as an In-Flight Black Box

  - by Marcus Hirt

  The new JRockit Flight Recorder has some very interesting properties. It can be used like the black box of an airplane, allowing users to go back in time and check what was happening around the time when something went wrong. Here is how to enable the default continuous recording in JRockit to allow for that use case. The flight recorder is on by default in JRockit R28, the problem is that there is no recording running by default. To configure JRockit to start with the default recording running, add the parameter: -XX:FlightRecorderOptions=defaultrecording=true That will enable a recording with recording ID 0. You can see that it has been started properly by choosing Show Recordings from the context menu in JRockit Mission Control.   You should see something similar to the picture below. Simply right click on the recording and select dump to dump information available in the flight recorder. You can select to dump data for a specific period of time or all data. For more information about the command line parameters available to control the Flight Recorder, see the JRockit documentation.

  Read the article

• Antec Fusion Black LCD won't turn off on system shutdown

  - by Niklas

  Hi! I've been struggling a while with getting the iMON LCD/IR-receiver on my Antec Fusion Black case to shutdown together with the system (XBMC Live 10 - ubuntu based). But it won't. When it's turned off the LCD still lights up the whole room. Many have proposed the "solution" of setting the machine into hibernation instead but that however won't work for me, since I'm unable to suspend my system. It is the LCD/IR-module that prevents me from suspending and I haven't found a solution to properly unload it on suspending (it's way above my linux knowledge). I need help with getting the display to turn off the backlight when the system is turned off. Can anyone please help me? If anyone also has the knowledge on how to get the eject function to work on my Antec Veris rm200 remote I would be very grateful, I was told about that it could get fixed with irexec but I do not know how since I haven't been able to find a good tutorial on the subject. Thank you for helping me!

  Read the article

• Ubuntu 12.10 boots to purple or black screen but intermittently boots fine

  - by Nic

  I have a fresh install of Ubuntu 12.10 64bit dual booting with Win7 64bit. Windows boots fine every time. When I choose Ubuntu from Grub2 menu it will sometimes boot just fine. Most of the times though it gets stuck at a purple screen with nothing happening and no keys or key combinations working. Other times instead of the purple screen I get a black screen with a flashing cursor at the top. Nothing happens. I need to hold down the power button to restart and after a couple times of trying it will eventually boot into Ubuntu. Once that happens everything runs without any problems. I have tried different approaches to fix the problem but to no avail. I tried removing "quiet splash", used no splash, and nomodeset What I got from this was seeing all the text of the boot process but more often than not the process gets stuck right after recognizing all the USB ports and devices. If it gets stuck nothing happens (except when i plug in a usb device: it still recognizes it with a new line of text) In the case when the boot process works, after it lists the usb devices it tells me something like: recovery of read-only filesystem necessary. (its the filesystem that ubuntu runs on) then it does the recovery and i get: recovery complete. after that Ubuntu will boot properly and I get to see the login screen. I have no idea what to do to fix that problem. I have to reboot 3 to 5 times everytime I want to get into Ubuntu and I feel like I'm breaking my new Laptop. (its a lenovo ideapad z580 btw. i5 processor and nvidia gtx640 graphics card) I hope someone can help me. Thanks. Edit: i just got a "failed to enable AA error" message when waking it up from suspend. I don't know if that helps or has anything to do with the boot probs.

  Read the article

• Vertex fog producing black artifacts

  - by Nick

  I originally posted this question on the XNA forums but got no replies, so maybe someone here can help: I am rendering a textured model using the XNA BasicEffect. When I enable fog, the model outline is still visible as many small black dots when it should be "in the fog". Why is this happening? Here's what it looks like for me -- http://tinypic.com/r/fnh440/6 Here is a minimal example showing my problem: (the ship model that this example uses is from the chase camera sample on this site -- http://xbox.create.msdn.com/en-US/education/catalog/sample/chasecamera -- in case anyone wants to try it out ;)) public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; Model model; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); // TODO: use this.Content to load your game content here model = Content.Load<Model>("ship"); foreach (ModelMesh mesh in model.Meshes) { foreach (BasicEffect be in mesh.Effects) { be.EnableDefaultLighting(); be.FogEnabled = true; be.FogColor = Color.CornflowerBlue.ToVector3(); be.FogStart = 10; be.FogEnd = 30; } } } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); // TODO: Add your drawing code here model.Draw(Matrix.Identity * Matrix.CreateScale(0.01f) * Matrix.CreateRotationY(3 * MathHelper.PiOver4), Matrix.CreateLookAt(new Vector3(0, 0, 30), Vector3.Zero, Vector3.Up), Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver4, 16f/9f, 1, 100)); base.Draw(gameTime); } }

  Read the article

• Can't install Ubuntu, black screen after install

  - by Tyrone

  I tried several times, but wasn't able to make it work. I tried all recent types of Ubuntu but it didn't work. Then I tried acpi=off at the beginning of the installation. In this way I could finish the installation. But after the restart Ubuntu didn't work. Only a black screen appeared. Before that I tried it on the VirtualBox and it work. By the way my system is the following: (I use windows 7 currently) Processor AMD Athlon II P320 (2,1 GHz, second-level cache 2 ? 512 KB, HT 1600 MHz bus) Chipset AMD M880G + SB850 Memory Dual Channel, 3 GB DDR3-1066 Wide Screen 15.6 “high-definition (1366 ? 768) c LED-backlit, AU Optronics B156XW02 Video Card AMD Radeon HD 4250, from 336 MB video buffer in memory, support for DirectX 10.1 and UVD Sound system: HDA-codec IDT 92HD81B1X AMD HDMI Audio Hard drive WDC WD3200BEVT-75A23T0 (298 GB, 5400 RPM, SATA 2.0) Optical Drive: DVD ± RW Optiarc AD-7585H Communication tools Fast Ethernet (10/100 Mbit / c) Realtek RTL8102E/RTL8103E WiFi 802.11a/b/g Broadcom BCM4310 Bluetooth 2.1 + EDR Card reader Memory Card Reader 7-in-1 with support for SD / SDHC / MMC / MS / xD, and derivatives Interfaces / ports 3 USB 2.0 1 eSATA + USB 2.0 15-pin video connector VGA HDMI RJ-45 Ethernet 10/100 Mbit / c 2 analog mini-jack: a microphone / headphone jack for a Kensington lock slot AC adapter Battery Li-Ion 6-cell capacity of 4400 mA ? h (10,8, 48 W ? hr) AC power adapter 65 Watt Additional equipment integrated web-camera (1.3 mega pixels)

  Read the article

• Ubuntu Server 11.10 boot, white terminal with garbled black text

  - by SpeedCrazy

  I just installed Ubuntu server 11.10 and the install went fine. This system is running on an Intel Pentium II board with onboard graphics. However when I try to boot into Ubuntu I get a white terminal with garbled black text. I have tried various grub 'fixes' as googling the issue seemed to suggest it was a res or grub related issue. I cannot ssh in so the issue does affect Linux as well. I have had no luck with anything thus far and am at my wits end. This was my first Ubuntu excursion as my friend told me it was better for servers than CentOS because it was easier... Not so much.... Does anyone have any ideas as to what the issue could be? When answering bear in mind I am an Ubuntu noob and Linux novice. As of 1/26/12 I have tried to add the console=ttyl line to the /etc/default/grub and run update-grub. This results in the line in the boot parameters that normally reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root rovt.handoff=7 now reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root ro console=ttyl vt.handoff=7 This does not work. Is there anyway to have console=ttyl inserted on a line by itself? I am at my wits ends, Thanks for all your help, Speed

  Read the article

• AndEngine GLES2 - getting Black screen on emulator 4.1

  - by dizworld.com

  I'm new in andengine . I create following code public class MainActivity extends BaseGameActivity { static final int CAMERA_WIDTH = 800; static final int CAMERA_HEIGHT = 480; public Font mFont; public Camera mCamera; //A reference to the current scene public Scene mCurrentScene; public static BaseActivity instance; public EngineOptions onCreateEngineOptions() { instance = this; mCamera = new Camera(0, 0, CAMERA_WIDTH, CAMERA_HEIGHT); return new EngineOptions(true, ScreenOrientation.LANDSCAPE_SENSOR, new RatioResolutionPolicy(CAMERA_WIDTH, CAMERA_HEIGHT), mCamera); } @Override public void onCreateResources(OnCreateResourcesCallback arg0) throws Exception { mFont = FontFactory.create(this.getFontManager(),this.getTextureManager(), 256, 256,Typeface.create(Typeface.DEFAULT, Typeface.BOLD), 32); mFont.load(); } @Override public void onCreateScene(OnCreateSceneCallback arg0) throws Exception { mEngine.registerUpdateHandler(new FPSLogger()); mCurrentScene = new Scene(); Log.v("Scene","enter"); mCurrentScene.setBackground(new Background(0.09804f, 0.7274f, 0.8f)); // return mCurrentScene; } @Override public void onPopulateScene(Scene arg0, OnPopulateSceneCallback arg1) throws Exception { // TODO Auto-generated method stub } } I got code on sites there is returning scene but in AndEngine GLES2 in method onCreateScene() there is no return scene ... so my First run is BLACK .. any suggestion :)

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >