Search Results

Search found 3942 results on 158 pages for 'no sound'.

Page 7/158 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • 12.10 sound resumes only after Suspend

    - by user70716
    I installed the 12.10 yesterday and like 12.04 there was no sound, I have an ACER 4830 TG. I noticed that the HDMI output is working fine, but Speaker or Headphone isn't working. So I did the following: sudo add-apt-repository ppa:ubuntu-audio-dev sudo apt-get update sudo apt-get dist-upgrade and still couldn't get the sound. Then I found the temp fix for this issue which is to Suspend the machine completely and resume. However, after restart the same thing happens. Is there a solution to this issue?

    Read the article

  • Unable to record from USB sound card line-in connector

    - by tete
    I've been googling and struggling with this for a while but haven't been able to make this work. I bought a USB sound card (Encore ENMAB 8-CM) to record from its line-in connector. I'm not sure which input to pick in Audicity, but I'me sure I've tested them all. These are all the available inputs I have in Audacity. But there's no sound being recorded at all. I've already checked the device is working, so I really don't know if I'm doing something wrong. Any help will be very appreciated. Cheers.

    Read the article

  • Bad sound quality and headphones not working

    - by wifi
    Using Ubuntu 10.10, on a HP Pavilion t3019.es, which has a Realtek ALC880 soundcard. It has 6 rear jack outputs, plus digital audio input and output, plus 3 front jacks (mic, headphones and a blue one which i don't know what's for). The sound on my computer is very low, and when i raise the volume up to 50%, it starts sounding distorted, crackling. Also, the headphones don't work when i plug them (it just keeps on playing through the speakers). I tried to comment the "/etc/modprobe.d/alsa-base.conf" file according to the soundcard and jacks in my computer, but none of the lines added worked (naturally, didn't added them at once). I found out that adding "options snd-hda-intel model=generic" to it made the sound better, but it's not as good as in Windows yet. Any ideas? Other than setting the PCM value, didn't work for me. Thanks.

    Read the article

  • 12.04 - sound is laggy when running games through Wine

    - by orzechowskid
    Lenovo U400 Wine 1.5.5 Ubuntu 12.04 with all updates applied I'm experiencing severe (~500ms) audio lag in all games run in Wine. Portal 2, Half-Life, World of Goo, and Fallout are all exhibiting this problem. When I run winecfg though and click the "Test Sound" button at the bottom of the Audio tab, the sound effect appears to play immediately. So I'm not sure what's going on. I don't think it's a problem with PulseAudio by itself since totem videos and Youtube clips both play in perfect sync. Anyone have any ideas on where to start fixing this? thanks! (edit: I thought this was limited to Steam games but I installed a non-Steam game and I now see that's not the case. I get audio lag in other apps too.)

    Read the article

  • Kubuntu 13.04 Sound Problems

    - by Michael Nancarrow
    Well, I have already looked into drivers, and sound cards whatnot, but what happens to me is this; sometimes sound wants to play, sometimes it does not! Not via speakers, not via headphones-nothing! I am unsure of what causes this problem, but it is a reoccurring issue through the versions of Kubuntu I run. I do not see any noteable symptoms about this, it is completely random! I have tested it on fresh installs and modified versions and I get the same problem, which annoys me. If updated Flash, tried youtube, tried various video players-the lot! Any help would be appreciated, thanks!

    Read the article

  • Weird sound problems after upgrading to 13.10 (macbook)

    - by Atsch
    I have been having a very weird problem with my sound lately: 1)My right channel is extremely disorted with relativly loud noises, tested with several headphones. 2) After a while, wiered noises start coming from my speakers 3) playing lots of sounds at once causes the the output to become really mushed, e.g. in lmms or games. all points to a: a fault in my sound card, or b: a fault in alsa or pulseaudio, but I don't know how to find out. I will now try using the alsa-daily, and edit this away depending on my results after a restart

    Read the article

  • sound stops working after a while in ubuntu 12.10

    - by clio
    i did a clean install on ubuntu 12.10. Everything seemed fine at first including sound but after a while it stopped working. To get is back i have to restart it, sometimes even more than once. Any idea on how to fix this? sudo aplay -L default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC665 Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=PCH,DEV=0 HDA Intel PCH, HDMI 0 HDMI Audio Output dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct sample mixing device dmix:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct sample mixing device dmix:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct sample snooping device dsnoop:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct sample snooping device dsnoop:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct hardware device without any conversions hw:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct hardware device without any conversions hw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Hardware device with all software conversions plughw:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Hardware device with all software conversions plughw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Hardware device with all software conversions

    Read the article

  • Make the sound louder in Lubuntu

    - by Andrew
    I have a Toshiba r835 running Lubuntu 11.10. Turning the volume slider up all the way doesn't give very loud sound. I've tried typing alsamixer in a terminal and turning up all the levels there to maximum, but the speakers are still fairly quiet. Is there a simple way to increase maximum volume in software? I understand that there are physical limits to the sound the laptop's speakers can produce, but I suspect my maximum volume is limited by software. EDIT: This is exactly the type of solution I'm looking for. However, it doesn't work for me. What I did: sudo pico /etc/asound.conf This file does not exist, so I create a new one, containing: pcm.!default { type plug slave.pcm "softvol" } pcm.softvol { type softvol slave { pcm "dmix" } control { name "Pre-Amp" card 0 } min_dB -5.0 max_dB 20.0 resolution 6 } I reboot the machine, and type alsamixer. I use my left/right arrow keys to inspect the various volume options. I expect to see a new option, called Pre-Amp, but I don't see one. This fix seems to work for other people. Why doesn't this fix work for me?

    Read the article

  • HP Envy 15 3040nr sound issues

    - by Lenny
    I have successfully set up my Envy 15" for Ubuntu 12.04 except for the sound, anyone have any ideas about how to get it working? I had to blacklist snd-usb-audio to my alsa to stop pulseaudio from freezing on login and logout, but now no sound plays. Could anyone provide me with some guidance? lspci info 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.2 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] 09:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34) 0a:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 10:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 11:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

    Read the article

  • Sound not working after installing PCI video card and then removing it

    - by bakhshu
    I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

    Read the article

  • Ubuntu sound volume is 40% lower than in Windows

    - by ncomx
    I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

    Read the article

  • No sound, can't adjust alsamixer volume

    - by user734613
    I have no sound on my ubuntu and I do not know why. I saw a lot of posts about that, I tried a lots of solutions that I found (especially this one) but it still does not work. I suspect alsamixer. I can't adjust the sound. http://img15.hostingpics.net/pics/447765Screenshotfrom20120621140430.png I tried to reinstall alsa mixer using this tutorial but it seems the package does not exist anymore. E: Unable to locate package linux-alsa-driver-modules-3.2.0-25-generic E: Couldn't find any package by regex 'linux-alsa-driver-modules-3.2.0-25-generic' Here are my configuration: cat /proc/driver/nvidia/version NVRM version: NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012 GCC version: gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) aplay -l List of PLAYBACK Hardware Devices ** card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 grep eld_valid /proc/asound/NVidia/eld* /proc/asound/NVidia/eld#0.0:eld_valid 0 /proc/asound/NVidia/eld#0.1:eld_valid 0 Thanks in advance for your help.

    Read the article

  • Crackling sound from right laptop speaker

    - by user1880405
    This problem lasts for several months already (first on Ubuntu 13.10, not on 12.04. I get very loud cracking/popping sound from my right Asus K56C's speaker, I searched everything but could not get rid of it. Several facts: There is no problem on Windows 8. It has nothing to do with applications running because it appears even before login screen of Ubuntu. Also same problem if I boot from Live USB. Muting sound will remove noise, but lowering volume has no effect. Inserting any headphones, removes the noise. If I disconnect power cable while there is noise, noise will always disappear, but only if there is no music playing. If I start playing music, noise again appear even with power cable disconnected. Sometimes that noise disappears for 1-4 weeks, and then again appears for no reason and lasts from several days to weeks. That noise is always the same, and I tried adding tsched=0 to /etc/pulse/default.pa. Also tried this PositionReporting fix, with no effect. I also tried disconnecting all the cables and removing all electronic devices around laptop, but it has no effect. I also tried removing Pulse Audio, didn't change anything. Would be great if someone has some real solution for this problem.

    Read the article

  • Streaming desktop with avconv - severe sound issues

    - by Tommy Brunn
    I'm trying to do some live streaming in Ubuntu 12.10, but I'm having some problems with audio. More specifically, the quality is complete garbage and it's at least 10 seconds out of sync with the video. I'm using an excellent guide found here to set up my loopback devices so that I can combine the desktop audio with the microphone input. It seems to work, as I'm able to stream both audio and video to Twitch.tv. But, as I said, the audio quality is terrible. The microphone audio is very, very low, but if I increase it, I get a horrible garbled sound that is absolutely unbearable. Nothing like that is present during VoIP calls or when recording sound alone with the sound recorder, so it's not an issue with the microphone itself. The entire audio stream is also delayed about 10-15 seconds compared to the video stream. I put together an imgur album of my settings. Here is some example output from when I'm streaming: avconv version 0.8.4-6:0.8.4-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:51:11 with gcc 4.7.2 [x11grab @ 0x162fd80] device: :0.0+570,262 -> display: :0.0 x: 570 y: 262 width: 1280 height: 720 [x11grab @ 0x162fd80] shared memory extension found [x11grab @ 0x162fd80] Estimating duration from bitrate, this may be inaccurate Input #0, x11grab, from ':0.0+570,262': Duration: N/A, start: 1353181686.735113, bitrate: 884736 kb/s Stream #0.0: Video: rawvideo, bgra, 1280x720, 884736 kb/s, 30 tbr, 1000k tbn, 30 tbc [alsa @ 0x163fce0] capture with some ALSA plugins, especially dsnoop, may hang. [alsa @ 0x163fce0] Estimating duration from bitrate, this may be inaccurate Input #1, alsa, from 'pulse': Duration: N/A, start: 1353181686.773841, bitrate: N/A Stream #1.0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s Incompatible pixel format 'bgra' for codec 'libx264', auto-selecting format 'yuv420p' [buffer @ 0x1641ec0] w:1280 h:720 pixfmt:bgra [scale @ 0x1642480] w:1280 h:720 fmt:bgra -> w:852 h:480 fmt:yuv420p flags:0x4 [libx264 @ 0x165ae80] VBV maxrate unspecified, assuming CBR [libx264 @ 0x165ae80] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x165ae80] profile Main, level 3.1 [libx264 @ 0x165ae80] 264 - core 123 r2189 35cf912 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=2 deblock=1:0:0 analyse=0x1:0x111 me=hex subme=6 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=1 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=0 open_gop=1 weightp=1 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=30 rc=cbr mbtree=1 bitrate=712 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=712 vbv_bufsize=512 nal_hrd=none ip_ratio=1.25 aq=1:1.00 Output #0, flv, to 'rtmp://live.justin.tv/app/live_23011330_Pt1plSRM0z5WVNJ0QmCHvTPmpUnfC4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: libx264, yuv420p, 852x480, q=-1--1, 712 kb/s, 1k tbn, 30 tbc Stream #0.1: Audio: libmp3lame, 44100 Hz, 2 channels, s16, 712 kb/s Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Stream #1:0 -> #0:1 (pcm_s16le -> libmp3lame) Press ctrl-c to stop encoding frame= 17 fps= 0 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 32 fps= 31 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 40 fps= 23 q=29.0 size= 44kB time=0.03 bitrate=13786.2kbits/s dup=frame= 47 fps= 21 q=31.0 size= 93kB time=2.73 bitrate= 277.7kbits/s dup=0frame= 62 fps= 23 q=29.0 size= 160kB time=3.23 bitrate= 406.2kbits/s dup=0frame= 77 fps= 24 q=23.0 size= 209kB time=3.71 bitrate= 462.5kbits/s dup=0frame= 92 fps= 25 q=20.0 size= 267kB time=4.91 bitrate= 445.2kbits/s dup=0frame= 107 fps= 25 q=20.0 size= 318kB time=5.41 bitrate= 482.1kbits/s dup=0frame= 123 fps= 26 q=18.0 size= 368kB time=5.96 bitrate= 505.7kbits/s dup=0frame= 139 fps= 26 q=16.0 size= 419kB time=6.48 bitrate= 529.7kbits/s dup=0frame= 155 fps= 27 q=15.0 size= 473kB time=7.00 bitrate= 553.6kbits/s dup=0frame= 170 fps= 27 q=14.0 size= 525kB time=7.52 bitrate= 571.7kbits/s dup=0 frame= 180 fps= 25 q=-1.0 Lsize= 652kB time=7.97 bitrate= 670.0kbits/s dup=0 drop=32 //Here I stop the streaming video:531kB audio:112kB global headers:0kB muxing overhead 1.345945% [libx264 @ 0x165ae80] frame I:1 Avg QP:30.43 size: 39748 [libx264 @ 0x165ae80] frame P:45 Avg QP:11.37 size: 11110 [libx264 @ 0x165ae80] frame B:134 Avg QP:15.93 size: 27 [libx264 @ 0x165ae80] consecutive B-frames: 0.6% 0.0% 1.7% 97.8% [libx264 @ 0x165ae80] mb I I16..4: 7.3% 0.0% 92.7% [libx264 @ 0x165ae80] mb P I16..4: 0.1% 0.0% 0.1% P16..4: 49.1% 1.2% 2.1% 0.0% 0.0% skip:47.4% [libx264 @ 0x165ae80] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.1% 0.0% 0.0% direct: 0.0% skip:99.9% L0:42.5% L1:56.9% BI: 0.6% [libx264 @ 0x165ae80] coded y,uvDC,uvAC intra: 82.3% 87.4% 71.9% inter: 7.1% 8.4% 7.0% [libx264 @ 0x165ae80] i16 v,h,dc,p: 27% 29% 16% 28% [libx264 @ 0x165ae80] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 21% 14% 8% 8% 8% 7% 5% 7% [libx264 @ 0x165ae80] i8c dc,h,v,p: 47% 22% 20% 11% [libx264 @ 0x165ae80] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0x165ae80] ref P L0: 96.4% 3.6% [libx264 @ 0x165ae80] kb/s:474.19 Received signal 2: terminating. Any ideas on how I can resolve this? The video delay is perfectly acceptable, so I wouldn't think that it's a network issue that's causing the delay in the audio. Any help would be appreciated.

    Read the article

  • How can I run unity with Slim with sound

    - by Samir
    I'm trying to start the unity environment from slim display manager, everything goes fine, except by the sound that don't work, the device just dont appear in the device list I already changed the slim config file to start with this code below, but it didnt solve the problem.... login_cmd exec ck-launch-session dbus-launch /bin/bash -login /etc/X11/Xsession %session I believe the it is related with some thing that the gdm/lighdm start with the session and slim dont do that When I use the lighdm or gdm to start the environment everything works fine

    Read the article

  • Sound and Video Skips on Ubuntu 11.10 64 bit

    - by Timothy LaFontaine
    I preformed a dist-upgrade from 11.04 to 11.10 and now I can not listen to any music or sounds (log on sound included), nor watch video without it stopping and then catching up and stopping again (This is flash or .mp4 through VLC). I did not have this issue with 11.04 and have even just preformed a fresh install of my system. I have tried to reinstall Pulse Audio and removing the .pulse folder but to no avail. Any help would be appreciated.

    Read the article

  • how to record sound via headphone in audacity

    - by agha rehan abbas
    i have tried recording sound via headphone but i cant get it done not only that but while using skype my voice is not audible to the person whom i am talking but i can hear his voice i think it is the issue of some simple settings so can any one help me to get it done i have connected my headphone into my pc but i cant see it in the list of recordable devices have a look at it is this an issue of incompatible headphones ?

    Read the article

  • Automatically change Sound Input Output device

    - by Senthil Kumaran
    I have to plugin my USB Audio adapter ( 4300054 Gigawire USB Audio Adapter) for audio input because has a combo-input-output port for voice. After I do this, I have go open Sound Settings and manually select the USB Audio adapter for Input and Output, if I do not, the system default remains selected. Is there anyway, I can make Ubuntu to automatically select the USB Audio Adapter as the default as soon as I plug-in?

    Read the article

  • HDMI sound gone, can't figure out how to turn it back on

    - by Oli
    I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

    Read the article

  • Sound works but cannot change settings or volume

    - by W. Conrad Walden
    Volume is always on max. The volume indicator is showing three dashes and does not show anything when I click on it. Clicking the "sound" button in settings causes it to recursively reopen settings. pulseaudio --start doesn't help. EDIT: This has only started happening after the upgrade to 13.10 EDIT 2: This is in Unity, yes. EDIT 3: killall unity-panel-service works and does reload the panels, but previous problems persist.

    Read the article

  • No Speaker sound on HP ProBook 6550b

    - by tUTe
    I have this problems since always, but never care, today i want to use only ubuntu, no more windows, so i installed ubuntu 14.04 and the speakers does not work (work fine on windows until yesterday) but the headphones jack works properly I try to check alsamixer, and everything is in 100, but if i check the sound devices only show me the headphones I do this link and does not work too, and i don't know what else i do

    Read the article

  • Ubuntu 12.04 Sound only comes in Headphones doesn't come in Inbuilt Speakers - HP Pavilion dv6 1280us

    - by linuxfreak12
    I am newbie of Ubuntu 12.04 with Gnome3 Shell. Laptop Model: HP Pavilion DV6 1280US Full Updates Installed. I can hear sound played only when headphones are plugged in. Regular inbuilt speakers doesn't work. Speakers are fine, it should be some technical configuration/driver issue with OS. They work in the Windows OS in the same laptop. Kindly check these two snapshots: Ubuntu Geeks Kindly help me!

    Read the article

  • My sound is not working

    - by gkhan
    I am not able to hear any sound. Does anyone have a clue how to proceed in fixing this? Issuing aplay gives this $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog] Subdevices: 2/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • 5.1 surround sound on Acer Aspire 5738ZG with Ubuntu 11.10

    - by kbargais_LV
    I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

    Read the article

  • How can I make QSSTV recognise my sound device

    - by hellocatfood
    After reading this article from Instructables I wanted to try it out in Ubuntu. Luckily QSSTV is available but I'm having problems getting it to work properly. When pressing the green light (to receive data) I get this error: After going to Options Configure Interfaces I discovered that it's attempting to use /dev/dsp which doesn't appear to exist. In my /dev folder there are no files that reference sound devices and I've tried all of the devices in /dev/snd but unfortunately none of them work. Is there a specific audio device that I should be linking to?

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >