Search Results

Search found 163 results on 7 pages for 'sysconfig'.

Page 7/7 | < Previous Page | 3 4 5 6 7 

• How Hacker Can Access VPS CentOS 6 content?

  - by user2118559

  Just want to understand. Please, correct mistakes and write advices Hacker can access to VPS: 1. Through (using) console terminal, for example, using PuTTY. To access, hacker need to know port number, username and password. Port number hacker can know scanning open ports and try to login. The only way to login as I understand need to know username and password. To block (make more difficult) port scanning, need to use iptables configure /etc/sysconfig/iptables. I followed this https://www.digitalocean.com/community/articles/how-to-setup-a-basic-ip-tables-configuration-on-centos-6 tutorial and got *nat :PREROUTING ACCEPT [87:4524] :POSTROUTING ACCEPT [77:4713] :OUTPUT ACCEPT [77:4713] COMMIT *mangle :PREROUTING ACCEPT [2358:200388] :INPUT ACCEPT [2358:200388] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [2638:477779] :POSTROUTING ACCEPT [2638:477779] COMMIT *filter :INPUT DROP [1:40] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [339:56132] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP -A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j DROP -A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG FIN,SYN,RST,PSH,ACK,URG -j DROP -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 110 -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -s 11.111.11.111/32 -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT -A INPUT -s 11.111.11.111/32 -p tcp -m tcp --dport 21 -j ACCEPT COMMIT Regarding ports that need to be opened. If does not use ssl, then seems must leave open port 80 for website. Then for ssh (default 22) and for ftp (default 21). And set ip address, from which can connect. So if hacker uses other ip address, he can not access even knowing username and password? Regarding emails not sure. If I send email, using Gmail (Send mail as: (Use Gmail to send from your other email addresses)), then port 25 not necessary. For incoming emails at dynadot.com I use Email Forwarding. Does it mean that emails “does not arrive to VPS” (before arriving to VPS, emails are forwarded, for example to Gmail)? If emails does not arrive to VPS, then seems port 110 also not necessary. If use only ssl, must open port 443 and close port 80. Do not understand regarding port 3306 In PuTTY with /bin/netstat -lnp see Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 992/mysqld As understand it is for mysql. But does not remember that I have opened such port (may be when installed mysql, the port is opened automatically?). Mysql is installed on the same server, where all other content. Need to understand regarding port 3306 2. Also hacker may be able access console terminal through VPS hosting provider Control Panel (serial console emergency access). As understand only using console terminal (PuTTY, etc.) can make “global” changes (changes that can not modify with ftp). 3. Hacker can access to my VPS exploiting some hole in my php code and uploading, for example, Trojan. Unfortunately, faced situation that VPS was hacked. As understand it was because I used ZPanel. On VPS ( \etc\zpanel\panel\bin) ) found one php file, that was identified as Trojan by some virus scanners (at virustotal.com). Experimented with the file on local computer (wamp). And appears that hacker can see all content of VPS, rename, delete, upload etc. From my opinion, if in PuTTY use command like chattr +i /etc/php.ini then hacker could not be able to modify php.ini. Is there any other way to get into VPS?

  Read the article

• Exalogic 2.0.1 Tea Break Snippets - Creating a ModifyJeOS VirtualBox

  - by The Old Toxophilist

  Following on from my previous blog entry "Modifying the Base Template" I decided to put together a quick blog to show how to create a small VirtualBox, guest, that can be used to execute the ModifyJeOS and hence edit you templates. One of the main advantages of this is that Templates can be created away from the Exalogic Environment. For the Guest OS I chose OEL 6u3 and decided to create it as a basic server because I did not require a graphical interface but it's a simple change to create it with a GUI. Required Software Virtual Box. Oracle Enterprise Linux. Creating the VM I'll assume that the reader is experienced with Virtual Box and installing OEL and hence will make this section brief. Create VirtualBox Guest Create a new VirtualBox Guest and select oracle Linux 64 bit. Follow through the create process and select Dynamic Disk Size and the default 12GB disk size. The actual image will be a lot smaller than this but the OEL install will fail with insufficient disk space if you attempt a smaller size. Once the guest has been created attach the previously downloaded OEL 6u3 iso to the cd drive and start the guest. Install OEL On starting the guest the system will boot off the associated OEL 6u3 iso and take you through the standard installation process. Select all the appropriate information but when you reach the installation type select Basic Server because we do not need that additional packages and only need to access through the command line interface. Complete the installation and reboot the Guest. At this point we now have a basic OEL server running. Installing Guest Add-ons Before we can easily access the Guest we will need to add the VirtualBox guest add-ons. These will provide better keyboard and mouse integration and allow access the shared folders on the host machine. Before we can do this we will need to do the following: Enable Networking. Install additional rpms.  To enable the networking (eth0), that appears to be disabled by default, we can execute: ifup eth0 This will start the eth0 connection but once the Guest is rebooted the network will be down again. To resolve this you will need to edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file and change the ONBOOT parameter to "yes". Now we have enabled the network we will need to install a number of addition rpm. First we will need to configure the yum repository as follows: [ol6_latest] name=Oracle Linux $releasever Latest ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=1 [ol6_ga_base] name=Oracle Linux $releasever GA installation media copy ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/0/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 [ol6_u1_base] name=Oracle Linux $releasever Update 1 installation media copy ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/1/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 [ol6_u2_base] name=Oracle Linux $releasever Update 2 installation media copy ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/2/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 [ol6_u3_base] name=Oracle Linux $releasever Update 3 installation media copy ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/3/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 [ol6_UEK_latest] name=Latest Unbreakable Enterprise Kernel for Oracle Linux $releasever ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/latest/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=1 [ol6_UEK_base] name=Unbreakable Enterprise Kernel for Oracle Linux $releasever ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 Once the repository has been edited we will need to execute the following yum commands: yum update yum install gcc yum install kernel-uek-devel yum install kernel-devel yum install createrepo At this point we now have all the additional packages required to install the VirtualBox Guest Add-ons. So select Devices->InstallGuest Additions on you running guest: This will simply place the VirtualBoxGuestAdditions.iso in the virtual cd and we will need to execute the following before we can run them. mkdir /media/cdrom mount -t iso9660 -o ro /dev/cdrom /media/cdrom cd /media/cdrom/ ls ./VBoxLinuxAdditions.run This will initiate the install and kernel rebuild. What you will notice is that during the installation a Failed will be displayed but this is simply because we have no graphical components. At this point we the installation will also have added the vboxsf group to the system and to access any shared folders we will create our user will need to be a member of this group an so the next stage is to add the root user to this group as follows: usermod -G vboxsf root cat /etc/group cat /etc/passwd init 0 Now simply shutdown the guest and add the Shared folder within your guests settings. Install ModifyJeOS Once the shared folder has been added restart the guest and change directory into the shared folder (/media/sf_<folder name>). For the next step I am assuming the ModifyJeOS rpms are located in the shared folder. We can simply execute: rpm -ivh ovm-modify-jeos-1.1.0-17.el5.noarch.rpm # Test with modifyjeos Using ModifyJeOS I have a modified MountSystemImg.sh script that should be copied into the /root/bin directory (you may need to create this) and from here it can be executed from any location: MountSystemImg.sh #!/bin/sh # The script assumes it's being run from the directory containing the System.img # Export for later i.e. during unmount export LOOP=`losetup -f` export SYSTEMIMG=/mnt/elsystem export TEMPLATEDIR=`pwd` # Make Temp Mount Directory mkdir -p $SYSTEMIMG # Create Loop for the System Image losetup $LOOP System.img kpartx -a $LOOP mount /dev/mapper/`basename $LOOP`p2 $SYSTEMIMG #Change Dir into mounted Image cd $SYSTEMIMG echo "######################################################################" echo "### ###" echo "### Starting Bash shell for editing. When completed log out to ###" echo "### Unmount the System.img file. ###" echo "### ###" echo "######################################################################" echo bash cd ~ cd $TEMPLATEDIR umount $SYSTEMIMG kpartx -d $LOOP losetup -d $LOOP rm -rf $SYSTEMIMG This script will simple create a mount directory, mount the System.img and then start a new shell in the mounted directory. On exiting the shell it will unmount the System.img. It only requires that you execute the script in the directory containing the System.img. These can be created under the mounted shared directory. In the example below I have extracted the Base template within the shared folder and then renamed it OEL_40GB_ROOT before changing into that directory and executing the script.

  Read the article

• Cyrus on CentOS with sasl / pam / ldap

  - by Oscar

  SASL/PAM/LDAP is driving me crazy... that's what I read a lot when googling for problems in this area, and what I experience myself :-S I'm trying to get Cyrus imap working for virtual hosting on CentOS with this authorisation backend and really don't know what's happening. In saslauthd I configured the LDAP search filter to use, but it looks like pam completely ignores it. Here's what I do for testing (done more tests but all with similar results): [root@testserv ~]# imtest -u [email protected] -a [email protected] WARNING: no hostname supplied, assuming localhost S: * OK [CAPABILITY IMAP4 IMAP4rev1 LITERAL+ ID STARTTLS] testserv. Cyrus IMAP4 v2.3.7-Invoca-RPM-2.3.7-7.el5_6.4 server ready C: C01 CAPABILITY S: * CAPABILITY IMAP4 IMAP4rev1 LITERAL+ ID STARTTLS ACL RIGHTS=kxte QUOTA MAILBOX-REFERRALS NAMESPACE UIDPLUS NO_ATOMIC_RENAME UNSELECT CHILDREN MULTIAPPEND BINARY SORT SORT=MODSEQ THREAD=ORDEREDSUBJECT THREAD=REFERENCES ANNOTATEMORE CATENATE CONDSTORE IDLE LISTEXT LIST-SUBSCRIBED X-NETSCAPE URLAUTH S: C01 OK Completed Please enter your password: C: L01 LOGIN [email protected] {6} S: + go ahead C: <omitted> S: L01 NO Login failed: authentication failure Authentication failed. generic failure Security strength factor: 0 C: Q01 LOGOUT * BYE LOGOUT received Q01 OK Completed Connection closed. The LDAP entry does exist (and so does the mailbox in Cyrus): [root@testserv ~]# ldapsearch -WxD cn=Manager,o=mydomain,c=com [email protected] Enter LDAP Password: # extended LDIF # # LDAPv3 # base <> with scope subtree # filter: [email protected] # requesting: ALL # # myuser, accounts, testserv.mydomain.com, mydomain, com dn: uid=myuser,ou=accounts,dc=testserv.mydomain.com,o=mydomain,c=com objectClass: top objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson objectClass: posixAccount objectClass: shadowAccount uidNumber: 16 uid: myuser gidNumber: 5 givenName: My sn: Name mail: [email protected] cn: My Name userPassword:: dYN5ebB0fXhNRn1pZllhRnJX7Uk= shadowLastChange: 15176 homeDirectory: /dev/null # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 This is what I get in /var/log/messages Aug 2 04:00:11 testserv cyrus/imap[12514]: auxpropfunc error invalid parameter supplied Aug 2 04:00:19 testserv saslauthd[5926]: do_auth : auth failure: [[email protected]] [service=imap] [realm=testserv.mydomain.com] [mech=pam] [reason=PAM auth error] ... /var/adm/auth.log Aug 2 04:00:11 testserv cyrus/imap[12514]: auxpropfunc error invalid parameter supplied Aug 2 04:00:11 testserv cyrus/imap[12514]: _sasl_plugin_load failed on sasl_auxprop_plug_init for plugin: ldapdb Aug 2 04:00:19 testserv saslauthd[5926]: DEBUG: auth_pam: pam_authenticate failed: User not known to the underlying authentication module Aug 2 04:00:19 testserv saslauthd[5926]: do_auth : auth failure: [[email protected]] [service=imap] [realm=testserv.mydomain.com] [mech=pam] [reason=PAM auth error] (AFAIK I can ignore the auxprop msg) ... and /var/log/slapd.log: Aug 2 04:00:19 testserv slapd[5968]: conn=61 fd=27 ACCEPT from IP=127.0.0.1:51403 (IP=0.0.0.0:389) Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=0 BIND dn="" method=128 Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=0 RESULT tag=97 err=0 text= Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=1 SRCH base="o=mydomain,c=com" scope=2 deref=0 filter="([email protected])" Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=1 SEARCH RESULT tag=101 err=0 nentries=0 text= Aug 2 04:00:19 testserv slapd[5968]: conn=61 op=2 UNBIND Aug 2 04:00:19 testserv slapd[5968]: conn=61 fd=27 closed These are the settings in In /etc/imapd.conf: sasl_mech_list: PLAIN LOGIN sasl_pwcheck_method: saslauthd ## sasl_auxprop_plugin: sasldb sasl_auto_transition: no and my sasl config: [root@testserv ~]# cat /etc/sysconfig/saslauthd # Directory in which to place saslauthd's listening socket, pid file, and so # on. This directory must already exist. SOCKETDIR=/var/run/saslauthd # Mechanism to use when checking passwords. Run "saslauthd -v" to get a list # of which mechanism your installation was compiled with the ablity to use. MECH=pam # Additional flags to pass to saslauthd on the command line. See saslauthd(8) # for the list of accepted flags. FLAGS="-c -r -O /etc/saslauthd.conf" [root@testserv ~]# cat /etc/saslauthd.conf ldap_servers: ldap://127.0.0.1/ ldap_search_base: dc=%d,o=mydomain,c=com ldap_auth_method: bind #ldap_filter: (|(uid=%u)((&(mail=%u@%d)(accountStatus=active))) ldap_filter: (&(mail=%u@%d)(accountStatus=active)) ldap_debug: 1 ldap_version: 3 The accountStatus=active is not in ldap yet, but that doesn't make a difference since I don't see it in the filter... that's not the reason for the failure. The weird thing is, I do get an error when I rename or remove /etc/saslauthd.conf, but when the file exists it seems happily ignored... The filter in slapd.log seems to be taken from /etc/ldap.conf. Apart from some timers, that only contains: host 127.0.0.1 base o=mydomain,c=com pam_login_attribute mail Outcommenting the pam_login_attribute results in this filter in slapd.log: filter="([email protected])" Pam-imap looks like this: [root@testserv ~]# cat /etc/pam.d/imap auth required pam_ldap.so debug account required pam_ldap.so debug #auth sufficient pam_unix.so likeauth nullok #auth sufficient pam_ldap.so use_first_pass #auth required pam_deny.so #account sufficient pam_unix.so #account sufficient pam_ldap.so The outcommented stuff is because I don't have the cyrus admin user in Ldap; that's a Linux user. That works fine when uncommented, but I still need to play around with that a little and first I wanna get imap working. Finally nsswitch: [root@testserv ~]# cat /etc/nsswitch.conf # # /etc/nsswitch.conf # # An example Name Service Switch config file. This file should be # sorted with the most-used services at the beginning. # # The entry '[NOTFOUND=return]' means that the search for an # entry should stop if the search in the previous entry turned # up nothing. Note that if the search failed due to some other reason # (like no NIS server responding) then the search continues with the # next entry. # # Legal entries are: # # nisplus or nis+ Use NIS+ (NIS version 3) # nis or yp Use NIS (NIS version 2), also called YP # dns Use DNS (Domain Name Service) # files Use the local files # db Use the local database (.db) files # compat Use NIS on compat mode # hesiod Use Hesiod for user lookups # [NOTFOUND=return] Stop searching if not found so far # # To use db, put the "db" in front of "files" for entries you want to be # looked up first in the databases # # Example: #passwd: db files nisplus nis #shadow: db files nisplus nis #group: db files nisplus nis passwd: compat ldap group: compat ldap shadow: compat ldap hosts: files dns bootparams: nisplus [NOTFOUND=return] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: nisplus publickey: nisplus automount: files nisplus aliases: files nisplus Any info where to start looking will be greatly appreciated! Thnx in advance

  Read the article

• DNS server not functioning correctly

  - by Shamit Shrestha

  I have setup a DNS server which isnt working properly. My domain is accswift.com which has glued to two name servers ns1.accswift.com and ns2.accswift.com for the same IP address - 203.78.164.18. On domain end everything should be fine. Please check -http://www.intodns.com/accswift.com I am sure its the problem with the linux server. Can anyone help me find where the problem is for me? Below is the settings that I have in the server. ====================== DIG [root@accswift ~]# dig accswift.com ; << DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.6 << accswift.com ;; global options: +cmd ;; Got answer: ;; -HEADER<<- opcode: QUERY, status: NOERROR, id: 11275 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2 ;; QUESTION SECTION: ;accswift.com. IN A ;; ANSWER SECTION: accswift.com. 38400 IN A 203.78.164.18 ;; AUTHORITY SECTION: accswift.com. 38400 IN NS ns1.accswift.com. accswift.com. 38400 IN NS ns2.accswift.com. ;; ADDITIONAL SECTION: ns1.accswift.com. 38400 IN A 203.78.164.18 ns2.accswift.com. 38400 IN A 203.78.164.18 ;; Query time: 1 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Wed Nov 6 20:12:16 2013 ;; MSG SIZE rcvd: 114 ============== IP Tables settings vi /etc/sysconfig/iptables *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A FORWARD -o eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_OUT: -A FORWARD -i eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_IN: -A OUTPUT -o eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_OUT: -A INPUT -i eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_IN: -A INPUT -p udp -m udp --sport 53 -j ACCEPT -A OUTPUT -p udp -m udp --dport 53 -j ACCEPT COMMIT Completed on Fri Sep 20 04:20:33 2013 Generated by webmin *mangle :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT Completed Generated by webmin *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT ====DNS settings vi /var/named/accswift.com.host $ttl 38400 @ IN SOA ns1.accswift.com. root.ns1.accswift.com. ( 1382936091 10800 3600 604800 38400 ) @ IN NS ns1.accswift.com. @ IN NS ns2.accswift.com. accswift.com. IN A 203.78.164.18 accswift.com. IN NS ns1.accswift.com. www.accswift.com. IN A 203.78.164.18 ftp.accswift.com. IN A 203.78.164.18 m.accswift.com. IN A 203.78.164.18 ns1 IN A 203.78.164.18 ns2 IN A 203.78.164.18 localhost.accswift.com. IN A 127.0.0.1 webmail.accswift.com. IN A 203.78.164.18 admin.accswift.com. IN A 203.78.164.18 mail.accswift.com. IN A 203.78.164.18 accswift.com. IN MX 5 mail.accswift.com. ====Named.conf vi /etc/named.conf options { listen-on port 53 { 127.0.0.1; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query { any; }; recursion yes; allow-recursion { localhost; 192.168.2.0/24; }; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; forward first; forwarders {192.168.1.1;}; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "." IN { type hint; file "named.ca"; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; zone "accswift.com" { type master; file "/var/named/accswift.com.hosts"; allow-transfer { 127.0.0.1; localnets; 208.73.211.69; }; }; zone "ns1.accswift.com" { type master; file "/var/named/ns1.accswift.com.hosts"; }; ==================================== Can anybody find any flaw in this? I am still unable to reach accswift.com from any other ISP. But it is browsable from the same network though. Thanks in advance.

  Read the article

• Ports do not open after rules appended in iptables

  - by user2699451

  I have a server that I am trying to setup for OpenVPN. I have followed all the steps, but I see that when I try to connect to it in Windows, it doesn't allow me, it just hangs on connecting, so I did a nmap scan and I see that port 1194 is not open so naturally I append the rule to open 1194 with: iptables -A INPUT -i eth0 -p tcp --dport 1194 -j ACCEPT followed by service iptables save and service iptables restart which all executed successfully. Then I try again, but it doesn't work and another nmap scan says that port 1194 is closed. Here is the iptables configuration: # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *nat :PREROUTING ACCEPT [27410:3091993] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [5042:376160] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -j SNAT --to-source 41.185.26.238 -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE COMMIT # Completed on Thu Oct 31 09:47:38 2013 # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *filter :INPUT ACCEPT [23571:2869068] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [27558:3656524] :vl - [0:0] -A INPUT -p tcp -m tcp --dport 5252 -m comment --comment "SSH Secure" -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -m state --state NEW,RELATED,ESTABLISHED -$ -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -m comment --comment "SSH" -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -m comment --comment "HTTP" -j ACCEPT -A INPUT -p tcp -m tcp --dport 8080 -m comment --comment "HTTPS" -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -m comment --comment "HTTP Encrypted" -j ACCEP$ -A INPUT -i eth0 -p tcp -m tcp --dport 1723 -j ACCEPT -A INPUT -i eth0 -p gre -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A FORWARD -i ppp+ -o eth0 -j ACCEPT -A FORWARD -i eth0 -o ppp+ -j ACCEPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -p icmp -m icmp --icmp-type 0 -m state --state RELATED,ESTABLISHED -j A$ COMMIT # Completed on Thu Oct 31 09:47:38 2013 and my nmap scan from: localhost: nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds remote pc: nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.025s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 15.70 seconds So, I do not know what is causing this, any assistance will be appreciated! UPDATE AFTER FIRST ANSWER::: [root@RLA04-NIX1 ~]# iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -j REJECT [root@RLA04-NIX1 ~]# iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE [root@RLA04-NIX1 ~]# service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ] [root@RLA04-NIX1 ~]# service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter nat [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: [ OK ] [root@RLA04-NIX1 ~]# lsof -i :1194 -bash: lsof: command not found iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5252 /* SSH Secure */ ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 state NEW,RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 /* SSH */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 /* HTTP */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 /* HTTPS */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 /* HTTP Encrypted */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:1723 ACCEPT 47 -- 0.0.0.0/0 0.0.0.0/0 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 state RELATED,ESTABLISHED Chain vl (0 references) target prot opt source destination [root@RLA04-NIX1 ~]# nmap localhostt Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST remote pc nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:11 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.020s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.18 seconds localhost nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds UPDATE AFTER SCANNING UDP PORTS Sorry, I am noob, I am still learning, but here is the output for: nmap -sU [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:33 SAST Nmap scan report for [server address] ([server ip]) Host is up (0.021s latency). Not shown: 997 open|filtered ports PORT STATE SERVICE 53/udp closed domain 123/udp closed ntp 33459/udp closed unknown Nmap done: 1 IP address (1 host up) scanned in 8.57 seconds btw, no changes have been made since post started (except for iptables changes)

  Read the article

• Set up linux box for hosting a-z

  - by microchasm

  I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure virtual interfaces/ip based virtual hosts for SSL, setting up a CA, or anything else would be appreciated.

  Read the article

• Begin the Clone Wars Have!

  - by Antony Reynolds

  Creating a New Virtual Machine from an Existing Virtual Disk In previous posts I described how I set up an OEL6 machine under VirtualBox that can run an 11gR2 database and FMW 11.1.1.5.  That is great if you want the DB and FMW running in the same virtual image and it has served me well for some proof of concepts and also for some testing of different JVMs.  However I also wanted to run some testing of FMW with the database running on a separate physical machine.  So in this post I will show how to take a VirtualBox image and create a new image based on the disks from that original image. What are my Options? There is more than one way to skin a cat, or in this case to create two separate VMs that can run on different hardware.  Some of the options include: Create new virtual disk images for each new VM. Clone the existing disk images and point the new VM at the cloned images. Point the new VM at the existing snapshots. #1 is too much like hard work, install OEL twice, install a database again, install FMW again, run RCU again!  Life is too short! #2 is probably the safest way of doing things.  VirtualBox allows you to clone a disk image for use in a separate machine.  However this of course duplicates the disk and means that it is now occupying 3 times the space, once for the original disk and twice more for the two clones I would need. #3 is the most space efficient way of doing things.  It does mean however that I can only run the new “cloned” images if I have access to the original image because that is where the base snapshots reside.  However this is not a problem for me as long as I remember to keep all threee images together.  So this is the approach we will follow. Snapshot, What Snapshot? As we are going to create new virtual machines based on existing snapshots we need to figure out which snapshot to use.  We do this by opening the “Media Manager” from within VirtualBox and moving the mouse over the snapshot images until we find the snapshots we want – the snapshot name is identified in the “Attached to:” comment.  In my case I wanted the FMW installed snapshot because that had a database configured for FMW alongside the FMW software.  I made a note of the filename of that snapshot (actually I just noted the first 5 characters as that was all that was needed to uniquely identify the snapshot file). When we create the new machines we will point them at the snapshot filename we have just checked. Network or NotWork? Because we want the two new machines to communicate with each other when hosted in different physical machines we can’t use the default NAT networking mode without a lot of hassle.  But at the same time we need them to have fixed IP addresses relative to each other so that they can see each other whilst also being able to see the outside world. To achieve all these requirements I created two network adapters for each machine.  Adapter 1 was a standard NAT mapping.  This will allow each machine to get a dynamic IP address (10.0.2.15 by default) that can be used to access the external world through the VBox provided NAT gateway.  This is the same as the existing configuration. The second adapter I created as a bridged adapter.  This gives the virtual machine direct access to the host network card and by using fixed IP addresses each machine can see the other.  It is important to choose fixed IP addresses that are not routable across your internal network so you don’t get any clashes with other machines on your network.  Of course you could always get proper fixed IP addresses from your network people, but I have serveral people using my images and as long as I don’t have two instances of the same VM on the same network segment this is easier and avoids reconfiguring the network every time someone wants a copy of my VM.  If it is available I would suggest using the 10.0.3.* network as 10.0.2.* is the default NAT network.  You can check availability by pinging 10.0.3.1 and 10.0.3.2 from your host machine.  If it times out then you are probably safe to use that. Creating the New VMs Now that I had collected the data that I needed I went ahead and created the new VMs. When asked for a “Boot Hard Disk” I used the “Choose a virtual hard disk file…” link to find the snapshot I had previously selected and set that to be the existing hard disk.  I chose the previously existing SOA 11.1.1.5 install for both the new DB and FMW machines because that snapshot had the database with the RCU completed that I wanted for my DB machine and it had the SOA software installed which I wanted for my FMW machine. After the initial creation of the virtual machine go into the network setting section and enable a second adapter which will be bridged.  Make a note of the MAC addresses (the last four digits should be sufficient) of the two adapters so that you can later set the bridged adapter to use fixed IP and the NAT adapter to use DHCP. We are now ready to start the VMs and reconfigure Linux. Reconfiguring Linux Because I now have two new machines I need to change their network configuration.  In particular I need to change the hostname, update the hosts file and change the network settings. Changing the Hostname I renamed both hosts by running the hostname command as root: hostname vboxfmw.oracle.com I also edited the /etc/sysconfig file and set the correct hostname in there. HOSTNAME=vboxfmw.oracle.com Changing the Network Settings I needed to change the network configuration to give the bridged network a fixed IP address.  I first explicitly set the MAC addresses of the two adapters, because the order of the virtual adapters in the VirtualBox Manager is not necessarily the same as the order of the adapters in the guest OS.  So I went in to the System->Preferences->Network Connections screen and explicitly set the “Device MAC address” for the two adapters. Having correctly mapped the Linux adapters to the VirtualBox adapters I then set the Bridged adapter to use fixed IP addressing rather than DHCP.  There is no need for additional routing or default gateways because we expect the two machine to be on the same LAN segment. Updating the Hosts File Having renamed the machines and reconfigured the network I then updated the /etc/hosts file to refer to the new machine name add a new line to the hosts file to provide an additional IP address for my server (the new fixed IP address) add a new line for the fixed IP address of the other virtual machine 10.0.3.101      vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.2.15       vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.3.102      vboxfmw.oracle.com      vboxfmw # Added by NetworkManager 127.0.0.1       localhost.localdomain   localhost ::1     vboxdb.oracle.com       vboxdb  localhost6.localdomain6 localhost6 To make sure everything takes effect I restarted the server. Reconfiguring the Database on the DB Machine Because we changed the hostname the listener and the EM console no longer start so I need to modify the listener.ora to use the new hostname and I also need to rebuild the EM configuration because it also relies on the hostname. I edited the $ORACLE_HOME/network/admin/listener.ora and changed the listening address to the new hostname:       (ADDRESS = (PROTOCOL = TCP)(HOST = vboxdb.oracle.com)(PORT = 1521)) After changing the listener.ora I was able to start the listener using: lsnrctl start I also had to reconfigure the EM database control.  I first deconfigured it using the command: emca -deconfig dbcontrol db -repos drop This drops the repository and removes any existing registered dbcontrols. I then re-configured it using the following command: emca -config dbcontrol db -repos create This creates the EM repository and then configures and starts dbcontrol. Now my database machine is ready so I can close it down and take a snapshot. Disabling the Database on the FMW Machine I set up the database to start automatically by creating a service called “dbora”.  On the FMW machine I do not need the database running so I can prevent it auto-starting by running the following command: chkconfig –del dbora Note that because I am using a snapshot it is not a waste of disk space to have the DB installed but not used.  As long as I don’t run it, it won’t cost me anything. I can now close the FMW machine down and take a snapshot. Creating a New Domain The FMW machine is now ready to create a new domain.  When creating the domain I can point it at the second machine which is running the database.  I can potentially run these machines on two separate physical machines as long as I have the original virtual machine available to both of the physical machines. Gotchas in Snapshotting VirtualBox does not support the concept of linked machines in a network like some virtualization technologies so when creating a snapshot it is a good idea to shut both VMs down and then take a snapshot on both of them.  This is because we want to keep the database in sync with the middleware.  One way to make sure that this happens would be to place all the domain configuration files on the database server via an NFS share, this would mean that all we would need to snapshot would be the database machine because that would hold all the state and configuration. The Sky’s the Limit We have covered a simple case of having just two machines.  I have a more complicated configuration in which two machine run a RAC database off the same base OS image, and two more machines run a SOA cluster based on the same OS image.  Just remember what machine holds state and what are the consequences of taking a snapshot.

  Read the article

• DNS and name server in centos 6.3 64 bit is not pinged out side

  - by user135855

  I got a problem with centOS 6.3 64-bit. I want to setup my nameserver with bind here. I am listing all my configuration [root@izyon92 ~]# cat/etc/hosts -------------- 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 182.19.26.92 izyon92.zyonize1.com izyon92 [root@izyon92 ~]# cat /etc/sysconfig/network --------------------------------------------- NETWORKING=yes HOSTNAME=izyon92.zyonize1.com GATEWAY=182.19.26.89 [root@izyon92 ~]# cat /etc/resolv.conf -------------------------------------------- # Generated by NetworkManager search zyonize1.com nameserver 182.19.26.92 [root@izyon92 ~]# cat /etc/named.conf -------------------------------------------- // // named.conf // // Provided by Red Hat bind package to configure the ISC BIND named(8) DNS // server as a caching only nameserver (as a localhost DNS resolver only). // // See /usr/share/doc/bind*/sample/ for example named configuration files. // options { #listen-on port 53 { 127.0.0.1; }; listen-on-v6 port 53 { none; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query { 182.19.26.92; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "." IN { type hint; file "named.ca"; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; [root@izyon92 ~]# cat /etc/named.rfc1912.zones -------------------------------------------------- // named.rfc1912.zones: // // Provided by Red Hat caching-nameserver package // // ISC BIND named zone configuration for zones recommended by // RFC 1912 section 4.1 : localhost TLDs and address zones // and http://www.ietf.org/internet-drafts/draft-ietf-dnsop-default-local-zones-02.txt // (c)2007 R W Franks // // See /usr/share/doc/bind*/sample/ for example named configuration files. // zone "localhost.localdomain" IN { type master; file "named.localhost"; allow-update { none; }; }; zone "localhost" IN { type master; file "named.localhost"; allow-update { none; }; }; zone "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa" IN { type master; file "named.loopback"; allow-update { none; }; }; zone "1.0.0.127.in-addr.arpa" IN { type master; file "named.loopback"; allow-update { none; }; }; zone "0.in-addr.arpa" IN { type master; file "named.empty"; allow-update { none; }; }; zone "zyonize1.com" { type master; file "/var/named/zyonize.com.hosts"; }; [root@izyon92 ~]# cat /var/named/zyonize.com.hosts --------------------------------------------------------- $ttl 38400 zyonize1.com. IN SOA 182.19.26.92. dev\.izyon.gmail.com. ( 1347436958 10800 3600 604800 38400 ) zyonize1.com. IN NS 182.19.26.92. zyonize1.com. IN A 182.19.26.92 www.zyonize1.com. IN A 182.19.26.92 izyon92.zyonize1.com. IN A 182.19.26.92 I have disabled selinux and stopped iptables. dig and nslookup is working fine in the same machine [root@izyon92 ~]# dig zyonize1.com ---------------------------------------- ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6_3.2 <<>> zyonize1.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55751 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;zyonize1.com. IN A ;; ANSWER SECTION: zyonize1.com. 38400 IN A 182.19.26.92 ;; AUTHORITY SECTION: zyonize1.com. 38400 IN NS 182.19.26.92. ;; Query time: 0 msec ;; SERVER: 182.19.26.92#53(182.19.26.92) ;; WHEN: Fri Sep 14 00:09:19 2012 ;; MSG SIZE rcvd: 72 [root@izyon92 ~]# nslookup zyonize1.com ---------------------------------------------- Server: 182.19.26.92 Address: 182.19.26.92#53 Name: zyonize1.com Address: 182.19.26.92 But here is the problem I am facing, I have windows machine, to test this dns and nameserver I set the first IPv4 DNS server to 182.19.26.92. Here is the details Connection-specific DNS Suffix: Description: Realtek PCIe GBE Family Controller Physical Address: ?14-FE-B5-9F-3A-A8 DHCP Enabled: No IPv4 Address: 192.168.2.50 IPv4 Subnet Mask: 255.255.255.0 IPv4 Default Gateway: 192.168.2.1 IPv4 DNS Servers: 182.19.26.92, 182.19.95.66 IPv4 WINS Server: NetBIOS over Tcpip Enabled: Yes Link-local IPv6 Address: fe80::45cc:2ada:c13:ca42%16 IPv6 Default Gateway: IPv6 DNS Server: when I am pining from this machine it is not finding the server. Where as in another server with another live IP with Fedora ping is working fine.

  Read the article

• How to improve Varnish performance?

  - by Darkseal

  We're experiencing a strange problem with our current Varnish configuration. 4x Web Servers (IIS 6.5 on Windows 2003 Server, each installed on a Intel(R) Xeon(R) CPU E5450 @ 3.00GHz Quad Core, 4GB RAM) 3x Varnish Servers (varnish-3.0.3 revision 9e6a70f on Ubuntu 12.04.2 LTS - 64 bit/precise, Kernel Linux 3.2.0-29-generic, each installed on a Intel(R) Xeon(R) CPU E5450 @ 3.00GHz Quad Core, 4GB RAM) The Varnish Servers performance are awfully bad in general, to the point that if we shut down one of them the other two are unable to fullfill all the requests and start to skip beats resulting in pending requests, timeouts, 404, etc. What can we do to improve our Varnish performance? Considering that we're getting less than 5k request per seconds during our max peak, we should be able to serve our pages even with a single one of them without any problem. We use a standard, vanilla CFG, as shown by this varnishadm param.show output: acceptor_sleep_decay 0.900000 [] acceptor_sleep_incr 0.001000 [s] acceptor_sleep_max 0.050000 [s] auto_restart on [bool] ban_dups on [bool] ban_lurker_sleep 0.010000 [s] between_bytes_timeout 60.000000 [s] cc_command "exec gcc -std=gnu99 -g -O2 -pthread -fpic -shared - Wl,-x -o %o %s" cli_buffer 8192 [bytes] cli_timeout 20 [seconds] clock_skew 10 [s] connect_timeout 0.700000 [s] critbit_cooloff 180.000000 [s] default_grace 10.000000 [seconds] default_keep 0.000000 [seconds] default_ttl 120.000000 [seconds] diag_bitmap 0x0 [bitmap] esi_syntax 0 [bitmap] expiry_sleep 1.000000 [seconds] fetch_chunksize 128 [kilobytes] fetch_maxchunksize 262144 [kilobytes] first_byte_timeout 60.000000 [s] group varnish (113) gzip_level 6 [] gzip_memlevel 8 [] gzip_stack_buffer 32768 [Bytes] gzip_tmp_space 0 [] gzip_window 15 [] http_gzip_support off [bool] http_max_hdr 64 [header lines] http_range_support on [bool] http_req_hdr_len 8192 [bytes] http_req_size 32768 [bytes] http_resp_hdr_len 8192 [bytes] http_resp_size 32768 [bytes] idle_send_timeout 60 [seconds] listen_address :80 listen_depth 1024 [connections] log_hashstring on [bool] log_local_address off [bool] lru_interval 2 [seconds] max_esi_depth 5 [levels] max_restarts 4 [restarts] nuke_limit 50 [allocations] pcre_match_limit 10000 [] pcre_match_limit_recursion 10000 [] ping_interval 3 [seconds] pipe_timeout 60 [seconds] prefer_ipv6 off [bool] queue_max 100 [%] rush_exponent 3 [requests per request] saintmode_threshold 10 [objects] send_timeout 600 [seconds] sess_timeout 5 [seconds] sess_workspace 16384 [bytes] session_linger 50 [ms] session_max 100000 [sessions] shm_reclen 255 [bytes] shm_workspace 8192 [bytes] shortlived 10.000000 [s] syslog_cli_traffic on [bool] thread_pool_add_delay 2 [milliseconds] thread_pool_add_threshold 2 [requests] thread_pool_fail_delay 200 [milliseconds] thread_pool_max 2000 [threads] thread_pool_min 5 [threads] thread_pool_purge_delay 1000 [milliseconds] thread_pool_stack unlimited [bytes] thread_pool_timeout 300 [seconds] thread_pool_workspace 65536 [bytes] thread_pools 2 [pools] thread_stats_rate 10 [requests] user varnish (106) vcc_err_unref on [bool] vcl_dir /etc/varnish vcl_trace off [bool] vmod_dir /usr/lib/varnish/vmods waiter default (epoll, poll) This is our default.vcl file: LINK sub vcl_recv { # BASIC recv COMMANDS: # # lookup -> search the item in the cache # pass -> always serve a fresh item (no-caching) # pipe -> like pass but ensures a direct-connection with the backend (no-cache AND no-proxy) # Allow the backend to serve up stale content if it is responding slow. # This defines when Varnish should use a stale object if it has one in the cache. set req.grace = 30s; if (client.ip == "127.0.0.1") { # request from NGINX - do not alter X-Forwarded-For set req.http.HTTPS = "on"; } else { # Add an X-Forwarded-For to keep track of original request unset req.http.HTTPS; unset req.http.X-Forwarded-For; set req.http.X-Forwarded-For = client.ip; } set req.backend = www_director; # Strip all cookies to force an anonymous request when the back-end servers are down. if (!req.backend.healthy) { unset req.http.Cookie; } ## HHTP Accept-Encoding if (req.http.Accept-Encoding) { if (req.http.Accept-Encoding ~ "gzip") { set req.http.Accept-Encoding = "gzip"; } else if (req.http.Accept-Encoding ~ "deflate") { set req.http.Accept-Encoding = "deflate"; } else { unset req.http.Accept-Encoding; } } if (req.request != "GET" && req.request != "HEAD" && req.request != "PUT" && req.request != "POST" && req.request != "TRACE" && req.request != "OPTIONS" && req.request != "DELETE") { /* non-RFC2616 or CONNECT */ return (pipe); } if (req.request != "GET" && req.request != "HEAD") { /* only deal with GET and HEAD by default */ return (pass); } if (req.http.Authorization) { return (pass); } if (req.http.HTTPS ~ "on") { return (pass); } ###################################################### # COOKIE HANDLING ###################################################### # METHOD 1: do not remove cookies, but pass the page if they contain TB_NC if (!(req.url ~ "(?i)\.(png|gif|ipeg|jpg|ico|swf|css|js)(\?[a-z0-9]+)?$")) { if (req.http.Cookie && req.http.Cookie ~ "TB_NC") { return (pass); } } return (lookup); } # Code determining what to do when serving items from the IIS Server sub vcl_fetch { unset beresp.http.Server; set beresp.http.Server = "Server-1"; # Allow items to be stale if needed. This is the maximum time Varnish should keep an object. set beresp.grace = 1h; if (req.url ~ "(?i)\.(png|gif|ipeg|jpg|ico|swf|css|js)(\?[a-z0-9]+)?$") { unset beresp.http.set-cookie; } # Default Varnish VCL logic if (!beresp.cacheable || beresp.ttl <= 0s || beresp.http.Set-Cookie || beresp.http.Vary == "*") { set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has specific TB_NC no-caching cookie if (req.http.Cookie && req.http.Cookie ~ "TB_NC") { set beresp.http.X-Cacheable = "NO:Got Cookie"; set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has Cache-Control private else if (beresp.http.Cache-Control ~ "private") { set beresp.http.X-Cacheable = "NO:Cache-Control=private"; set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has Cache-Control no-cache or Pragma no-cache else if (beresp.http.Cache-Control ~ "no-cache" || beresp.http.Pragma ~ "no-cache") { set beresp.http.X-Cacheable = "NO:Cache-Control=no-cache (or pragma no-cache)"; set beresp.ttl = 120 s; return(hit_for_pass); } # If we reach to this point, the object is cacheable. # Cacheable but with not enough ttl: we need to extend the lifetime of the object artificially # NOTE: Varnish default TTL is set in /etc/sysconfig/varnish # and can be checked using the following command: # varnishadm param.show default_ttl else if (beresp.ttl < 1s) { set beresp.ttl = 5s; set beresp.grace = 5s; set beresp.http.X-Cacheable = "YES:FORCED"; } # Cacheable and with valid TTL. else { set beresp.http.X-Cacheable = "YES"; } # DEBUG INFO (Cookies) # set beresp.http.X-Cookie-Debug = "Request cookie: " + req.http.Cookie; return(deliver); } sub vcl_error { set obj.http.Content-Type = "text/html; charset=utf-8"; if (obj.status == 404) { synthetic {" <!-- Markup for the 404 page goes here --> "}; } else if (obj.status == 500) { synthetic {" <!-- Markup for the 500 page goes here --> "}; } else if (obj.status == 503) { if (req.restarts < 4) { return(restart); } else { synthetic {" <!-- Markup for the 503 page goes here --> "}; } } else { synthetic {" <!-- Markup for a generic error page goes here --> "}; } } sub vcl_deliver { if (obj.hits > 0) { set resp.http.X-Cache = "HIT"; } else { set resp.http.X-Cache = "MISS"; } } Thanks in advance,

  Read the article

• Set up linux box for secure local hosting a-z

  - by microchasm

  I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms Virtualhosts In the rssh section above I added a user to use for SFTP. In this users' home directory, I created a folder called 'https'. This is where the documents for this site will live, so I need to add a virtualhost that will point to it. I will use the above virtual interface for this site (herein called dev.site.local). vi /etc/http/conf/httpd.conf Add the following to the end of httpd.conf: <VirtualHost 192.168.1.3:80> ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> I put a dummy index.html file in the https directory just to check everything out. I tried browsing to it, and was met with permission denied errors. The logs only gave an obscure reference to what was going on: [Mon May 17 14:57:11 2010] [error] [client 192.168.1.100] (13)Permission denied: access to /index.html denied I tried chmod 777 et. al., but to no avail. Turns out, I needed to chmod+x the https directory and its' parent directories. chmod +x /home chmod +x /home/dev chmod +x /home/dev/https This solved that problem. DNS I'm handling DNS via our local Windows Server 2003 box. However, the CentOS documentation for BIND can be found here: http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-bind.html SSL To get SSL working, I changed the following in httpd.conf: NameVirtualHost 192.168.1.3:443 #make sure this line is in httpd.conf <VirtualHost 192.168.1.3:443> #change port to 443 ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Unfortunately, I keep getting (Error code: ssl_error_rx_record_too_long) errors when trying to access a page with SSL. As JamesHannah gracefully pointed out below, I had not set up the locations of the certs in httpd.conf, and thusly was getting the page thrown at the broswer as the cert making the browser balk. So first, I needed to set up a CA and make certificate files. I found a great (if old) walkthrough on the process here: http://www.debian-administration.org/articles/284. Here are the relevant steps I took from that article: mkdir /home/CA cd /home/CA/ mkdir newcerts private echo '01' > serial touch index.txt #this and the above command are for the database that will keep track of certs Create an openssl.cnf file in the /home/CA/ dir and edit it per the walkthrough linked above. (For reference, my finished openssl.cnf file looked like this: http://pastebin.com/raw.php?i=hnZDij4T) openssl req -new -x509 -extensions v3_ca -keyout private/cakey.pem -out cacert.pem -days 3650 -config ./openssl.cnf #this creates the cacert.pem which gets distributed and imported to the browser(s) Modified openssl.cnf again per walkthrough instructions. openssl req -new -nodes -out dev.req.pem -config ./openssl.cnf #generates certificate request, and key.pem which I renamed dev.key.pem. Modified openssl.cnf again per walkthrough instructions. openssl ca -out dev.cert.pem -config ./openssl.cnf -infiles dev.req.pem #create and sign certificate. cp dev.cert.pem /home/dev/certs/cert.pem cp dev.key.pem /home/certs/key.pem I updated httpd.conf to reflect the certs and turn SSLEngine on: NameVirtualHost 192.168.1.3:443 <VirtualHost 192.168.1.3:443> ServerAdmin [email protected] DocumentRoot /home/dev/https SSLEngine on SSLCertificateFile /home/dev/certs/cert.pem SSLCertificateKeyFile /home/dev/certs/key.pem ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Put the CA cert.pem in a web-accessible place, and downloaded/imported it into my browser. Now I can visit https://dev.site.local with no errors or warnings. And this is where I'm at. I will keep editing this as I make progress. Any tips on how to configure SSL email would be appreciated.

  Read the article

• puma init.d for centos 6 fails with runuser: user /var/log/puma.log does not exist

  - by Rubytastic

  Trying to get a init.d/puma to work on Centos 6. It throws error runuser: user /var/log/puma.log does not exist I run this from the /srv/books/current folder but it fails. I tried to debug the values but not quite get what is missing and why it throws this error. #! /bin/sh # puma - this script starts and stops the puma daemon # # chkconfig: - 85 15 # description: Puma # processname: puma # config: /etc/puma.conf # pidfile: /srv/books/current/tmp/pids/puma.pid # Author: Darío Javier Cravero &lt;[email protected]> # # Do NOT "set -e" # Original script https://github.com/puma/puma/blob/master/tools/jungle/puma # It was modified here by Stanislaw Pankevich <[email protected]> # to run on CentOS 5.5 boxes. # Script works perfectly on CentOS 5: script uses its native daemon(). # Puma is being stopped/restarted by sending signals, control app is not used. # Source function library. . /etc/rc.d/init.d/functions # Source networking configuration. . /etc/sysconfig/network # Check that networking is up. [ "$NETWORKING" = "no" ] && exit 0 # PATH should only include /usr/* if it runs after the mountnfs.sh script PATH=/usr/local/bin:/usr/local/sbin/:/sbin:/usr/sbin:/bin:/usr/bin DESC="Puma rack web server" NAME=puma DAEMON=$NAME SCRIPTNAME=/etc/init.d/$NAME CONFIG=/etc/puma.conf JUNGLE=`cat $CONFIG` RUNPUMA=/usr/local/bin/run-puma # Skipping the following non-CentOS string # Load the VERBOSE setting and other rcS variables # . /lib/init/vars.sh # CentOS does not have these functions natively log_daemon_msg() { echo "$@"; } log_end_msg() { [ $1 -eq 0 ] && RES=OK; logger ${RES:=FAIL}; } # Define LSB log_* functions. # Depend on lsb-base (>= 3.0-6) to ensure that this file is present. . /lib/lsb/init-functions # # Function that performs a clean up of puma.* files # cleanup() { echo "Cleaning up puma temporary files..." echo $1; PIDFILE=$1/tmp/puma/puma.pid STATEFILE=$1/tmp/puma/puma.state SOCKFILE=$1/tmp/puma/puma.sock rm -f $PIDFILE $STATEFILE $SOCKFILE } # # Function that starts the jungle # do_start() { log_daemon_msg "=> Running the jungle..." for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/puma/config.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/puma/puma.log" fi do_start_one $dir $user $config_file $log_file done } do_start_one() { PIDFILE=$1/puma/puma.pid if [ -e $PIDFILE ]; then PID=`cat $PIDFILE` # If the puma isn't running, run it, otherwise restart it. if [ "`ps -A -o pid= | grep -c $PID`" -eq 0 ]; then do_start_one_do $1 $2 $3 $4 else do_restart_one $1 fi else do_start_one_do $1 $2 $3 $4 fi } do_start_one_do() { log_daemon_msg "--> Woke up puma $1" log_daemon_msg "user $2" log_daemon_msg "log to $4" cleanup $1; daemon --user $2 $RUNPUMA $1 $3 $4 } # # Function that stops the jungle # do_stop() { log_daemon_msg "=> Putting all the beasts to bed..." for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_stop_one $dir done } # # Function that stops the daemon/service # do_stop_one() { log_daemon_msg "--> Stopping $1" PIDFILE=$1/tmp/puma/puma.pid STATEFILE=$1/tmp/puma/puma.state echo $PIDFILE if [ -e $PIDFILE ]; then PID=`cat $PIDFILE` echo "Pid:" echo $PID if [ "`ps -A -o pid= | grep -c $PID`" -eq 0 ]; then log_daemon_msg "---> Puma $1 isn't running." else log_daemon_msg "---> About to kill PID `cat $PIDFILE`" # pumactl --state $STATEFILE stop # Many daemons don't delete their pidfiles when they exit. kill -9 $PID fi cleanup $1 else log_daemon_msg "---> No puma here..." fi return 0 } # # Function that restarts the jungle # do_restart() { for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_restart_one $dir done } # # Function that sends a SIGUSR2 to the daemon/service # do_restart_one() { PIDFILE=$1/tmp/puma/puma.pid i=`grep $1 $CONFIG` dir=`echo $i | cut -d , -f 1` if [ -e $PIDFILE ]; then log_daemon_msg "--> About to restart puma $1" # pumactl --state $dir/tmp/puma/state restart kill -s USR2 `cat $PIDFILE` # TODO Check if process exist else log_daemon_msg "--> Your puma was never playing... Let's get it out there first" user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/config/puma.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/log/puma.log" fi do_start_one $dir $user $config_file $log_file fi return 0 } # # Function that statuss then jungle # do_status() { for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_status_one $dir done } # # Function that sends a SIGUSR2 to the daemon/service # do_status_one() { PIDFILE=$1/tmp/puma/pid i=`grep $1 $CONFIG` dir=`echo $i | cut -d , -f 1` if [ -e $PIDFILE ]; then log_daemon_msg "--> About to status puma $1" pumactl --state $dir/tmp/puma/state stats # kill -s USR2 `cat $PIDFILE` # TODO Check if process exist else log_daemon_msg "--> $1 isn't there :(..." fi return 0 } do_add() { str="" # App's directory if [ -d "$1" ]; then if [ "`grep -c "^$1" $CONFIG`" -eq 0 ]; then str=$1 else echo "The app is already being managed. Remove it if you want to update its config." exit 1 fi else echo "The directory $1 doesn't exist." exit 1 fi # User to run it as if [ "`grep -c "^$2:" /etc/passwd`" -eq 0 ]; then echo "The user $2 doesn't exist." exit 1 else str="$str,$2" fi # Config file if [ "$3" != "" ]; then if [ -e $3 ]; then str="$str,$3" else echo "The config file $3 doesn't exist." exit 1 fi fi # Log file if [ "$4" != "" ]; then str="$str,$4" fi # Add it to the jungle echo $str >> $CONFIG log_daemon_msg "Added a Puma to the jungle: $str. You still have to start it though." } do_remove() { if [ "`grep -c "^$1" $CONFIG`" -eq 0 ]; then echo "There's no app $1 to remove." else # Stop it first. do_stop_one $1 # Remove it from the config. sed -i "\\:^$1:d" $CONFIG log_daemon_msg "Removed a Puma from the jungle: $1." fi } case "$1" in start) [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_start else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/config/puma.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/log/puma.log" fi do_start_one $dir $user $config_file $log_file fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; stop) [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_stop else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_stop_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; status) # TODO Implement. log_daemon_msg "Status $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_status else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_status_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; restart) log_daemon_msg "Restarting $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_restart else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_restart_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; add) if [ "$#" -lt 3 ]; then echo "Please, specifiy the app's directory and the user that will run it at least." echo " Usage: $SCRIPTNAME add /path/to/app user /path/to/app/config/puma.rb /path/to/app/config/log/puma.log" echo " config and log are optionals." exit 1 else do_add $2 $3 $4 $5 fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; remove) if [ "$#" -lt 2 ]; then echo "Please, specifiy the app's directory to remove." exit 1 else do_remove $2 fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; *) echo "Usage:" >&2 echo " Run the jungle: $SCRIPTNAME {start|stop|status|restart}" >&2 echo " Add a Puma: $SCRIPTNAME add /path/to/app user /path/to/app/config/puma.rb /path/to/app/config/log/puma.log" echo " config and log are optionals." echo " Remove a Puma: $SCRIPTNAME remove /path/to/app" echo " On a Puma: $SCRIPTNAME {start|stop|status|restart} PUMA-NAME" >&2 exit 3 ;; esac :

  Read the article

• Slow NFS and GFS2 performance

  - by Tiago

  Recently I've designed and configured a 4 node cluster for a webapp that does lots of file handling. The cluster have been broken down into 2 main roles, webserver and storage. Each role is replicated to a second server using drbd in active/passive mode. The webserver does a NFS mount of the data directory of the storage server and the latter also has a webserver running to serve files to browser clients. In the storage servers I've created a GFS2 FS to hold the data which is wired to drbd. I've chose GFS2 mainly because the announced performance and also because the volume size which has to be pretty high. Since we entered production I've been facing two problems that I think are deeply connected. First of all, the NFS mount on the webservers keeps hanging for a minute or so and then resumes normal operations. By analyzing the logs I've found out that NFS stops answering for a while and outputs the following log lines: Oct 15 18:15:42 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:44 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:46 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:51 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:58 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK In this case, the hang lasted for 16 seconds but sometimes it takes 1 or 2 minutes to resume normal operations. My first guess was this was happening due to heavy load of the NFS mount and that by increasing RPCNFSDCOUNT to a higher value, this would become stable. I've increased it several times and apparently, after a while, the logs started appearing less times. The value is now on 32. After further investigating the issue, I've came across a different hang, despite the NFS messages still appear in the logs. Sometimes, the GFS2 FS simply hangs which causes both the NFS and the storage webserver to serve files. Both stay hang for a while and then they resume normal operations. This hangs leaves no trace on client side (also leaves no NFS ... not responding messages) and, on the storage side, the log system appears to be empty, even though the rsyslogd is running. The nodes connect themselves through a 10Gbps non-dedicated connection but I don't think this is an issue because the GFS2 hang is confirmed but connecting directly to the active storage server. I've been trying to solve this for a while now and I've tried different NFS configuration options, before I've found out the GFS2 FS is also hanging. The NFS mount is exported as such: /srv/data/ <ip_address>(rw,async,no_root_squash,no_all_squash,fsid=25) And the NFS client mounts with: mount -o "async,hard,intr,wsize=8192,rsize=8192" active.storage.vlan:/srv/data /srv/data After some tests, these were the configurations that yielded more performance to the cluster. I am desperate to find a solution for this as the cluster is already in production mode and I need to fix this so that this hangs won't happen in the future and I don't really know for sure what and how I should be benchmarking. What I can tell is that this is happening due to heavy loads as I have tested the cluster earlier and this problems weren't happening at all. Please tell me if you need me to provide configuration details of the cluster, and which do you want me to post. As last resort I can migrate the files to a different FS but I need some solid pointers on whether this will solve this problems as the volume size is extremely large at this point. The servers are being hosted by a third-party enterprise and I don't have physical access to them. Best regards. EDIT 1: The servers are physical servers and their specs are: Webservers: Intel Bi Xeon E5606 2x4 2.13GHz 24GB DDR3 Intel SSD 320 2 x 120GB Raid 1 Storage: Intel i5 3550 3.3GHz 16GB DDR3 12 x 2TB SATA Initially there was a VRack setup between the servers but we've upgraded one of the storage servers to have more RAM and it wasn't inside the VRack. They connect through a shared 10Gbps connection between them. Please note that it is the same connection that is used for public access. They use a single IP (using IP Failover) to connect between them and to allow for a graceful failover. NFS is therefore over a public connection and not under any private network (it was before the upgrade, were the problem still existed). The firewall was configured and tested thoroughly but I disabled it for a while to see if the problem still occurred, and it did. From my knowledge the hosting provider isn't blocking or limiting the connection between either the servers and the public domain (at least under a given bandwidth consumption threshold that hasn't been reached yet). Hope this helps figuring out the problem. EDIT 2: Relevant software versions: CentOS 2.6.32-279.9.1.el6.x86_64 nfs-utils-1.2.3-26.el6.x86_64 nfs-utils-lib-1.1.5-4.el6.x86_64 gfs2-utils-3.0.12.1-32.el6_3.1.x86_64 kmod-drbd84-8.4.2-1.el6_3.elrepo.x86_64 drbd84-utils-8.4.2-1.el6.elrepo.x86_64 DRBD configuration on storage servers: #/etc/drbd.d/storage.res resource storage { protocol C; on <server1 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server1 ip>:7788; meta-disk internal; } on <server2 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server2 ip>:7788; meta-disk internal; } } NFS Configuration in storage servers: #/etc/sysconfig/nfs RPCNFSDCOUNT=32 STATD_PORT=10002 STATD_OUTGOING_PORT=10003 MOUNTD_PORT=10004 RQUOTAD_PORT=10005 LOCKD_UDPPORT=30001 LOCKD_TCPPORT=30001 (can there be any conflict in using the same port for both LOCKD_UDPPORT and LOCKD_TCPPORT?) GFS2 configuration: # gfs2_tool gettune <mountpoint> incore_log_blocks = 1024 log_flush_secs = 60 quota_warn_period = 10 quota_quantum = 60 max_readahead = 262144 complain_secs = 10 statfs_slow = 0 quota_simul_sync = 64 statfs_quantum = 30 quota_scale = 1.0000 (1, 1) new_files_jdata = 0 Storage network environment: eth0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip address> Bcast:<bcast address> Mask:<ip mask> inet6 addr: <ip address> Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:957025127 errors:0 dropped:0 overruns:0 frame:0 TX packets:1473338731 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2630984979622 (2.3 TiB) TX bytes:1648430431523 (1.4 TiB) eth0:0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip failover address> Bcast:<bcast address> Mask:<ip mask> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 The IP addresses are statically assigned with the given network configurations: DEVICE="eth0" BOOTPROTO="static" HWADDR=<mac address> ONBOOT="yes" TYPE="Ethernet" IPADDR=<ip address> NETMASK=<net mask> and DEVICE="eth0:0" BOOTPROTO="static" HWADDR=<mac address> IPADDR=<ip failover> NETMASK=<net mask> ONBOOT="yes" BROADCAST=<bcast address> Hosts file to allow for a graceful NFS failover in conjunction with NFS option fsid=25 set on both storage servers: #/etc/hosts <storage ip failover address> active.storage.vlan <webserver ip failover address> active.service.vlan As you can see, packet errors are down to 0. I've also ran ping for a long time without any packet loss. MTU size is the normal 1500. As there is no VLan by now, this is the MTU used to communicate between servers. The webservers' network environment is similar. One thing I forgot to mention is that the storage servers handle ~200GB of new files each day through the NFS connection, which is a key point for me to think this is some kind of heavy load problem with either NFS or GFS2. If you need further configuration details please tell me. EDIT 3: Earlier today we had a major filesystem crash on the storage server. I couldn't get the details of the crash right away because the server stop responding. After the reboot, I noticed the filesystem was extremely slow, and I was not being able to serve a single file through either NFS or httpd, perhaps due to cache warming or so. Nevertheless, I've been monitoring the server closely and the following error came up in dmesg. The source of the problem is clearly GFS, which is waiting for a lock and ends up starving after a while. INFO: task nfsd:3029 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. nfsd D 0000000000000000 0 3029 2 0x00000080 ffff8803814f79e0 0000000000000046 0000000000000000 ffffffff8109213f ffff880434c5e148 ffff880624508d88 ffff8803814f7960 ffffffffa037253f ffff8803815c1098 ffff8803814f7fd8 000000000000fb88 ffff8803815c1098 Call Trace: [<ffffffff8109213f>] ? wake_up_bit+0x2f/0x40 [<ffffffffa037253f>] ? gfs2_holder_wake+0x1f/0x30 [gfs2] [<ffffffff814ff42e>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff814ff2cb>] mutex_lock+0x2b/0x50 [<ffffffffa0379f21>] gfs2_log_reserve+0x51/0x190 [gfs2] [<ffffffffa0390da2>] gfs2_trans_begin+0x112/0x1d0 [gfs2] [<ffffffffa0369b05>] ? gfs2_dir_check+0x35/0xe0 [gfs2] [<ffffffffa0377943>] gfs2_createi+0x1a3/0xaa0 [gfs2] [<ffffffff8121aab1>] ? avc_has_perm+0x71/0x90 [<ffffffffa0383d1e>] gfs2_create+0x7e/0x1a0 [gfs2] [<ffffffffa037783f>] ? gfs2_createi+0x9f/0xaa0 [gfs2] [<ffffffff81188cf4>] vfs_create+0xb4/0xe0 [<ffffffffa04217d6>] nfsd_create_v3+0x366/0x4c0 [nfsd] [<ffffffffa0429703>] nfsd3_proc_create+0x123/0x1b0 [nfsd] [<ffffffffa041a43e>] nfsd_dispatch+0xfe/0x240 [nfsd] [<ffffffffa025a5d4>] svc_process_common+0x344/0x640 [sunrpc] [<ffffffff810602a0>] ? default_wake_function+0x0/0x20 [<ffffffffa025ac10>] svc_process+0x110/0x160 [sunrpc] [<ffffffffa041ab62>] nfsd+0xc2/0x160 [nfsd] [<ffffffffa041aaa0>] ? nfsd+0x0/0x160 [nfsd] [<ffffffff81091de6>] kthread+0x96/0xa0 [<ffffffff8100c14a>] child_rip+0xa/0x20 [<ffffffff81091d50>] ? kthread+0x0/0xa0 [<ffffffff8100c140>] ? child_rip+0x0/0x20

  Read the article

• How to set up dual quadro cards on RHEL 5.5?

  - by Alex J. Roberts

  I have a RHEL 5 workstation with 2 nvidia Quadro FX4500 cards, with one display attached to each card. After doing a clean install of RHEL 5.5, the second display doesnt work (it worked ok in RHEL 5.2). Neither separate X screens nor Xinerama are working. The kernel version is 2.6.18-194.el5 I've tried nvidia drivers 185.18.36 (the ones that i was using on 5.2) and the latest 260.19.36 and neither works. My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Aug 14 18:34:43 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" FontPath "unix/:7100" EndSection Section "ServerFlags" Option "Xinerama" "1" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from data in "/etc/sysconfig/keyboard" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "us" Option "XkbModel" "pc105" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:10:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:129:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection And the Xorg Log: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: Linux 2.6.18-164.11.1.el5 x86_64 Red Hat, Inc. Current Operating System: Linux blur.svsdsde 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 Build Date: 06 March 2010 Build ID: xorg-x11-server 1.1.1-48.76.el5 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 18 09:52:08 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Device0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (**) | |-->Device "Device1" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) FontPath set to: unix/:7100 (==) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib64/xorg/modules" (**) Option "Xinerama" "1" (**) Xinerama: enabled (==) Max clients allowed: 512, resource mask: 0xfffff (II) Open ACPI successful (/var/run/acpid.socket) (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib64/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,005e card 103c,1500 rev a3 class 05,80,00 hdr 00 (II) PCI: 00:01:0: chip 10de,0051 card 103c,1500 rev a3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,0052 card 103c,1500 rev a2 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,005a card 103c,1500 rev a2 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,005b card 103c,1500 rev a3 class 0c,03,20 hdr 80 (II) PCI: 00:04:0: chip 10de,0059 card 103c,1500 rev a2 class 04,01,00 hdr 00 (II) PCI: 00:06:0: chip 10de,0053 card 103c,1500 rev f2 class 01,01,8a hdr 00 (II) PCI: 00:07:0: chip 10de,0054 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:08:0: chip 10de,0055 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01 (II) PCI: 00:0a:0: chip 10de,0057 card 103c,1500 rev a3 class 06,80,00 hdr 00 (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 05:05:0: chip 104c,8023 card 103c,1500 rev 00 class 0c,00,10 hdr 00 (II) PCI: 0a:00:0: chip 10de,009d card 10de,02af rev a1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0206 (VGA_EN is cleared) (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xf5000000 - 0xf50fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 10: bridge is at (0:14:0), (0,10,10), BCTRL: 0x000a (VGA_EN is set) (II) Bus 10 I/O range: [0] -1 0 0x00003000 - 0x00003fff (0x1000) IX[B] (II) Bus 10 non-prefetchable memory range: [0] -1 0 0xf3000000 - 0xf4ffffff (0x2000000) MX[B] (II) Bus 10 prefetchable memory range: [0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B] (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:24:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (--) PCI:*(10:0:0) nVidia Corporation Quadro FX 4500 rev 161, Mem @ 0xf3000000/24, 0xc0000000/28, 0xf4000000/24, I/O @ 0x3000/7 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 185.18.36 Fri Aug 14 18:27:24 PDT 2009 (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/lib64/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib64/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) LoadModule: "kbd" (II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:51:02 PDT 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 0a:00:0 (--) Chipset NVIDIA GPU found (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib64/xorg/modules/libwfb.so (II) Module wfb: vendor="NVIDIA Corporation" compiled for 7.1.99.2, module version = 1.0.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib64/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "TwinView" "0" (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:10:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on Quadro FX 4500 at PCI:10:0:0: (--) NVIDIA(0): DELL 3007WFP (DFP-0) (--) NVIDIA(0): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(0): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Assigned Display Device: DFP-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select+0+0" (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1600 (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling (WW) NVIDIA(0): UBB. (==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) NVIDIA(GPU-1): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:129:0:0 (GPU-1) (--) NVIDIA(GPU-1): Memory: 524288 kBytes (--) NVIDIA(GPU-1): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU (--) NVIDIA(GPU-1): Connected display device(s) on Quadro FX 4500 at PCI:129:0:0: (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0) (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (==) NVIDIA(0): Disabling shared memory pixmaps (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (WW) Disabling Composite since Xinerama is enabled (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded (II) Open ACPI successful (/var/run/acpid.socket) (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Mouse0: ps2EnableDataReporting: succeeded (the snipped part can be changed if necessary) Any help at all would be appreciated. Cheers, Alex

  Read the article

< Previous Page | 3 4 5 6 7