Search Results

Search found 491 results on 20 pages for 'unusual'.

Page 7/20 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Get source and destination of outbound traffic in pfSense

  - by maxsilver

  I'm looking at the traffic graph in pfSense (Version 1.2.2), which we're using as a router / NAT / ect on our network. Recently, I'm seeing a sudden, constant spike of 15 - 30kbps traffic outbound, that is unusual for our network (normally its below 2kbps, we're mostly all inbound traffic) Is there any way to determine what the source of this traffic is, or where it's going? (Just an internal IP address for source, and external IP address for destination would be all I need) I've already tried switching the traffic graph to 'LAN' and watching the host list on the right side, but it seems ... flakey. The numbers it shows seem to fade in and out at random, and the values never add up to anywhere near the graph values. I'm not allowed to post the image, but a photo is available at - http://imgur.com/QYjKI.png

  Read the article

• Would Firefox 3.5.8 freezing on Windows 7 indicate a problem with Windows WiFi driver or with Firefo

  - by Krystof

  I recently installed Windows 7 in spite of a lack of driver support from my laptop manufacturer but somehow Windows 7 seemed to be able to figure out what was needed - including the WiFi driver. But after I installed Firefox 3.5.8, I found that Firefox freezes frequently. When this happens the whole Windows interface turns sort of whitish like it's disabling interaction and, indeed, you cannot interact with anything in Windows. After a few minutes the freeze resolves itself and everything returns to normal. I scanned for viruses and ran the defragenter but nothing seems unusual besides these freezes. Anyone have any ideas what might be causing it and whether it's likely a problem with Firefox or with Windows - or perhaps with the hardware or drivers (WiFi driver?)?

  Read the article

• Include Binary Files in DEB package

  - by user22611

  I need to build a DEB package from mainly Node.js Javascript files, but it should include some binary files as well. They are listed inside debian/source/include-binaries. Otherwise I get the error message dpkg-source: error: unrepresentable changes to source The command in question is: bzr builddeb -- -us -uc After adding the file include-binaries, when running bzr builddeb -- -us -uc again, now I get a different error: It says dpkg-source: error: aborting due to unexpected upstream changes, see /tmp/mailadmin_0.0-1.diff.n6m5_6 I have no idea how to get rid of this. In the next line of output it tells me dpkg-source: info: you can integrate the local changes with dpkg-source --commit But if I run this command in the build area of my package, it gives me the unrepresentable changes to source error message again, even though debian/source/include-binaries is present in the build area as well. I am missing the way out of this... I tried deleting all files that are produced by the build process, still no success. Further details: The target directory is /opt/mailadmin. Since this directory is unusual, I listed it in the file debian/mailadmin.install (which contains one line:) opt/mailadmin opt/ The bzr builddeb process uses this file as expected.

  Read the article

• Disqus ads are disqusting and here is how you turn them off

  - by Gopinath

  After couple of months I spent sometime yesterday reviewing my blog and coziie.com to see if everything is fine. Disqus, the best commenting system and an unusual suspect was looking weird. Commenting sections of my sites are displayed links of third party sites which I was not aware of. The content is annoying to me and I believe my site users are also annoyed. I don’t remember configuring something in disqus to display ads or earn money by promoting other’s content. Why on earth I would like to shows content of someone else’s website right inside comments section and annoy readers? Here is a screen grab of comment section that shows ads.   It turns to be disqus automatically enabled a feature called as “Discovery” to all publishers who upgraded the commenting system to the latest release. I remember upgrading commenting system to the latest release couple of months ago but I don’t remember specifically allowing disqus to spam my comment section!! I’m extremely unhappy with the way disqus automatically enabled spamming comment sections in the name of so called new features that benefits bloggers. How to turn of Discovery or Ads in Disqus I turned them off as soon as I noticed them and it’s very easy to do that. Here are the steps to be followed to turn off ads in comments Login in to disqus Switch to Settings tab Click on Discovery tab Choose the option Just comments Save the settings.  Though it’s easy to turn off the ads, it would have been nice if disqus did not enable them by default. Hey guys at disqus, you lost my trust and from now onwards I’ll double check before opting in to any new features.

  Read the article

• Debian date jumping, causing complete lockup

  - by artfulrobot

  I have a Debian Squeeze VM that has suddenly chosen to jump it's date forwards just over a month, which seems to confuse it no end and cause it to require a hard reset (yikes!). There is nothing unusual in the logs, except that the datestamp suddenly jumps (today back to 2005). It's happened three times, so I don't think it's to do with the leap second issue as the last one of those was in July. When it happened once I spent ages checking stuff but could not find anything, decided to forget it. But three times is becoming an issue on a production server. Edits providing information requested in comments (thanks!): I do not have control over the hypervisor, it is a hired VM. # cat /sys/devices/system/clocksource/clocksource0/current_clocksource kvm-clock # ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== +grendel.exizten 130.149.17.8 2 u 29 64 77 14.811 1.778 1.744 *panoramix.linoc 193.67.79.202 2 u 32 64 77 19.729 -0.419 1.691 +robert.elnounch 213.251.128.249 2 u 27 64 77 17.762 0.600 1.722 -janetzki.eu 83.169.43.165 3 u 31 64 77 27.214 3.575 1.638

  Read the article

• How can I find out which driver/file is being loaded when the system hangs during the Windows 7 boot

  - by user24247

  My desktop computer (1 OS, 1 drive, 1 partition) hangs during the Windows 7 boot process. When selecting F8 I can select Safe Boot which allows me to see the files processed during the boot process. I know that the last line displayed is the last file that was SUCCESFULLY loaded. How do I find out what the next line, and the potential candidate driver/file/program would have been? The unusual thing, at least in my experience, is that the freezing up of the system also happens when I boot from the Windows 7 install disks, which is preventing me from any repair options. With a failure of both, I cannot not restore Windows 7 to a previous date or uninstall drivers/programs that may be the cause of the hanging. Thanks for your responses. Marc

  Read the article

• Book recommendation for learning server management and Apache

  - by japancheese

  Hello, I'm currently managing a site that I feel could be optimized and utilized to be much faster, however, I'm having difficulty finding reliable information to do it. I find the Apache documentation to be a hard read, and too technical about things I don't have a strong grasp on. I'm just looking for a good beginner/intermediate book about server administration to learn as much as possible about Apache, as well as how to create a nice secure, robust server that doesn't crash at the first hint of unusual traffic surges. Thanks to anyone who can point me in the right direction.

  Read the article

• Can't Create New folder in my video folder

  - by tiki

  My OS is windows 7 Ultimate 32bit. My video folder location is C:\Users\User\Documents\Downloads\Video. I Can't create folder in the Video folder or see the files i saved. But I can see the files in the root location of the folder i.e by going to the folder from My Computer. I can create and find files when I go to the folder My Computer>C>Users>User>Documents>Downloads>Video. This is an unusual problem I have never seen. Even being a system Administrator I can't able to fix the problem. Please help me out. Thanks in advance

  Read the article

• Can I host a website on a different address from the webmail?

  - by Andrew

  I have what is to me an unusual situation. I have a client for whom I have built a website which I will be hosting, they have been using their domain name for their email addresses for a long period before I came along so moving their email account to my host would be problematic and building the website with their current host would also be problematic because their host is very restrictive. So to fix this I altered the A record in their existing control panel to point the domain name to my server. As a result I can see the pages that I have created at their domain and they can still access their existing webmail. However, it appears that they are now experiencing problems receiving email so I can only assume my solution was incorrect. What is the correct way to point their domain at my website but keep their webmail with the existing host? EDIT: 25/5/2012 - My client has finally responded to me after changing the MX record on their existing C-Panel. Email to their email address were being bounced back with the error 'no such recipient', so I set up the same email address in the new C-Panel and changed the MX record there to 'Remote mail exchanger' which has stopped the emails bouncing but has apparently lost them in cyperspace! Unfortunately I can't add a new record because this would require a fully qualified domain name and their domain name is of course pointed at our server!

  Read the article

• Volume size doesn't match Disk size after gparted expansion

  - by Cybersylum

  I just expanded a basic disk on a Windows XP VM from 15gb to 40 gb using GPARTED LiveCD (0.5.2-11). I didn't notice anything unusual during the expansion; but after I rebooted back into Windows, the disk capacity doesn't match the disk size as it should (only 1 volume on the disk). The disk shows as 40gb; but the C: volume still shows the original size. I've tried expanding the disk again with GPARTED (no change), and using VMware converter and have it adjust the size of the volume during the process (complains about a lack of space of snapshot error inside the os). The volume has 27% free space so I don't think it is a space issue. Chkdsk doesn't seem to find anything wrong either. The OS seems to run just fine, it doesn't see the additional space however. Any ideas?

  Read the article

• Why, in WPF, do we set an object to Stretch via its Alignment properties instead of Width/Height?

  - by Jonathan Hobbs

  In WPF's XAML, we can tell an element to fill its container like this: <Button HorizontalAlignment="Stretch" VerticalAlignment="Stretch" /> Why is it that when we set an element to Stretch, we do it via the HorizontalAlignment and VerticalAlignment properties? Why did the WPF design team decide to take this approach over having Width="Stretch" and Height="Stretch"? I presume it was a calculated decision, and I'm curious about the reasoning. CSS, among other technologies, follows the convention that stretching is done via the width and height properties, and that alignment affects positioning exclusively. This seems intuitive enough: stretching the element is manipulating its width and height, after all! Using the corresponding alignment property to stretch an element seems counter-intuitive and unusual in comparison. This makes me think they didn't just pick this option for no reason: they made a calculated decision and had reasons behind it. Width and Height use the double data type, which would ordinarily mean assigning it a string would be silly. However, WPF's Window objects can take Width="Auto", which gets treated as double.NaN. Couldn't Width="Stretch" be stored as double.PositiveInfinity or some other value?

  Read the article

• Sporadic disk clicking sound

  - by Abdó

  Hi, I'm having some unusual and sporadic hard disk clicking issues. Here is a cronological description of the facts. I'm using an ASUS P6T-SE with Intel Core i7, 6Gb RAM 600W Power supply and ATI4670 graphics, running Ubuntu 10.10. About one month ago my hard disk (SATA II Seagate Barracuda 1Tb 7200 rpm) started making a clicking sound: a sort of loud tic-tac, every second or so, when involved in disk activity. The system was clearly slower than before at disk access, but it was functional and I could not find any signal of trouble on the linux logs. I disconnected the disk and tried an older SATA drive I had around: no problem with it. Then I reconnected the Seagate disk, and the problem was mysteriously gone. Ubuntu booted normally, usual speed, no clicking. A couple of weeks later, the problem reappeared. I tried disconnecting reconnecting (as it somehow solved the problem before) without luck. So, despite it was a rather new drive, I assumed it was a hardware issue, made backups and bought a new drive. The new drive is a SATA II Seagate Barracuda 1.5 Tb 7200 rpm. I installed both drives at the same time, with the intention of transferring my files from on to the other. To my surprise, when I booted the computer with both drives, both started making the clicking sound !! Even worse, I removed the old drive, leaving the unformated new drive connected, and booted from a LiveCD. It kept clicking ! Puzzled by this, I tried both drives on my laptop with a SATA to USB cable. At the moment I connected any of them, they made one or two unusual clicks and immediately stopped doing that and worked normally. The old drive I thought almost dead, was working like a charm as if nothing happened. Then I thought: "ok, it must be the motherboard. Let's try again". So, I reconnected the old drive to the ASUS P6T motherboard (the same cables and SATA port as before), and it worked as if nothing happened ! The problem was gone again. The new 1.5 Tb drive was also working ok: No clicking nor slowdown. So I left the old 1Tb disk connected and kept using the computer daily during 3 weeks, until today it happened again. Now I don't really know what to do or check. I'm not even sure if it is a hardware issue any more ! This is rather annoying as it seems it happens with a period of 2 or 3 weeks and I have no means of forcing it to happen. Does anyone have a clue of what can causes this behaviour or have any suggestions of things I should check when it happens again ? What I did today is checking some SMART parameters Error log: smartctl -l error /dev/sda. No errors Short selftest: smartctl -t short /dev/sda. No errors Disk Health check: smartctl -H /dev/sda. passed And here are the vendor specific parameters (smartctl -A /dev/sda) Which I'm not quite sure how to interpret. === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 235962588 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 187 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 16348045 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3590 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 94 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 4295164029 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 057 045 Old_age Always - 30 (Lifetime Min/Max 19/31) 194 Temperature_Celsius 0x0022 030 043 000 Old_age Always - 30 (0 18 0 0) 195 Hardware_ECC_Recovered 0x001a 037 026 000 Old_age Always - 235962588 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 73950746906346 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1832967731 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3294986902 Any clue to this mystery will be really welcome. Thank you very much !!

  Read the article

• Help with proposed iSCSI SAN VMware implementation.

  - by obsidian

  We have four (with plans to grow to four more) Dell servers with 6 NICs. They are running VMware ESXi 4.1. We would like to connect all of them to an Openfiler iSCSI SAN via HP ProCurve 1810G switches. Based on the design below, is there anything I should be concerned about or anything unusual that I should look out for when making the iSCSI network configurations on the servers, switches and OpenFiler? Should I bond the connections on the servers or simply setup them up for failover? The primary goal is to maximize IOPS. Thanks in advance.

  Read the article

• Displaying unicode character U+2661 ("White Heart Suit") in Windows 7

  - by Jordan

  I can't get this character: ? to display properly in Windows Explorer, it instead shows up as a symbol of three lines, similar to this ?. The strangest thing is that if i use the heart symbol beside another unusual symbol, such as one of these: ??????, it will display correctly as a heart; yet if I delete the symbol which is next to the heart it will revert to the 3 lines symbol. All of these other symbols display correctly when used alone. Does anybody else have this problem? Is it possible that Windows has 2 different characters listed for U+2661? Thanks for any help

  Read the article

• Applying to a company while personally working on a comparable project

  - by Developer Art

  That's going to be an unusual question but here it goes. I'm entertaining the thought to send my docs to a place which develops a large web project of a social type. Social meaning people, communities, interaction and all that usual stuff. The issue is that I myself am working on something that falls into the category of social in my private time. Now the question. Is it wise to apply there under these circumstances? I think there may be issues of intellectual ownership if I develop something similar that exists or will exist in that company's work. On the other hand, the web of full of social places (even this site is one of them), many of them utilize the same ideas and move in the same direction and it seems to work for everyone. It's hard to come up with something which hasn't been tried yet by somebody else so it's all basically reuse of the commonly available ideas and experience. What I'm working on is not a functional equivalent, it's rather largely off. There may be some intersections, but on a large scale this is not an equivalent. And whatever features might coincide, they already exist everywhere on the web anyway. Also technology stacks are entirely different so the issue with directly copying out parts of the code is probably not applicable. I plan to say it up front that I'm engaged in a personal project of mine and let them see if it represents a problem for them. What do you think? Am I making things up or is there really an issue?

  Read the article

• Long string insertion with sed

  - by Luis Varca

  I am trying to use this expression to insert the contents of one text file into another after a give string. This is a simple bash script: TEXT=`cat file1.txt` sed -i "/teststring/a \ $TEXT" file2.txt This returns an error, "sed: -e expression #1, char 37: unknown command: `M'" The issue is in the fact that the contents of file1.txt are actually a private certificate so it's a large amount of text and unusual characters which seems to be causing an issue. If I replace $TEXT with a simple ASCII value it works but when it reads the large content of file1.txt it fails with that error. Is there some way to carry out this action? Is my syntax off with sed or my quote placement wrong?

  Read the article

• Understanding and memorizing git rebase parameters

  - by Robert Dailey

  So far the most confusing portion of git is rebasing onto another branch. Specifically, it's the command line arguments that are confusing. Each time I want to rebase a small piece of one branch onto the tip of another, I have to review the git rebase documentation and it takes me about 5-10 minutes to understand what each of the 3 main arguments should be. git rebase <upstream> <branch> --onto <newbase> What is a good rule of thumb to help me memorize what each of these 3 parameters should be set to, given any kind of rebase onto another branch? Bear in mind I have gone over the git-rebase documentation again, and again, and again, and again (and again), but it's always difficult to understand (like a boring scientific white-paper or something). So at this point I feel I need to involve other people to help me grasp it. My goal is that I should never have to review the documentation for these basic parameters. I haven't been able to memorize them so far, and I've done a ton of rebases already. So it's a bit unusual that I've been able to memorize every other command and its parameters so far, but not rebase with --onto.

  Read the article

• Easter eggs as IP protection in software

  - by Simon

  I work in embedded software, and for some reason, management wants to hide an Easter egg as means of IP protection. They call it a watermark, and since our software interact with the video preview feed (the image displayed on a screen before you take a photo), they want me to implement a trigger which will react to some unusual video input (a video konami code like dark - bright - dark - bright - whatever). When this trigger fires, something strange happens (which is outside of the normal behavior of the software). The goal is to check whether our software is included in a device. Does it sound like a good idea? I have many argument against this move: What if the konami code is too sensitive and user triggers it? Does this kind of watermark have any legal value? What if this "feature" is discovered by the client? The performance penalty should be very small, since the soft run on small devices. I am the one developping this trigger. If things go wrong, what is my responsibility? What is your opinion about this method? I can't find a link, but I remember seeing an answer on this site suggesting that putting Easter eggs for protection purpose was a good idea. Has anyone tried it with good results?

  Read the article

• Debugging an IP Camera

  - by Kevin Boyd

  Further to my previous question on ServerFault here, I finally can view the stream on RTSP however I still cannot view the camera stream in a web browser. The IP camera uses an activeX control in Internet Explorer. And although I can configure the camera settings from IE, I cannot view the stream it shows connecting for a few sec and shows disconnecting. I have forwarded the HTTP, RTSP and Stream ports of the IP camera. the public port is 7071 and private port is 7070. When I try to see the connections in TCPView it shows that the ActiveX control in IE is trying to connect to port 7070 which is quite unusual since it should connect to 7071 Also the state shows SYN_SENT for sometime and then disconnects. I have really no clue what's going on and why?

  Read the article

• ATI Radeon Drivers works with which linux distribution and version?

  - by amit.codename13

  I have ATI Mobility Radeon HD 5850 graphics card. Almost every new linux distribution seems to have an issue with it, when i install the drivers. Working without utilizing the graphics card leaves me so unproductive. So i made a plan to use older versions of linux, any distribution suitable as a desktop distribution. UPDATE: The kind of problems that i am facing are, 1) After installing drivers the system boots and hangs, 2) There are unusual lines over the screen 3) After upgrade system doesn't start properly(hangs the usual old way) The kind of answers i am looking for is, distribution X(the newer the version the better) doesn't have the above problem after installing drivers for ATI Mobility Radeon HD 5850 graphics card. UPDATE: The new drivers released by AMD seems to fix all the issues, although they are still beta Thanks

  Read the article

• HCM is Alive and Well in APAC

  - by Row Henson

  I just returned from a 5 country tour on “Rethinking HR” where Oracle hosted breakfast and lunch executive seminars to the most senior HR practitioners in 5 cities in these major markets in APAC. While I have done many of these “road shows” in the past, I was most impressed with the response we received during this trip. I’m sure the execution of our marketing and sales teams had lots to do with the turnout, but I’d also like to think that this region is primed for applications that help with the talent dilemma faced by many organizations today in this part of the world and are excited about the offerings Oracle provides to help our customers attract, develop, retain and analyze their human capital. For these type of events, we normally expect 25-30 companies in attendance with a drop-off rate of around 15%. In all 5 cities, we had standing room only with an average attendance of 50 people from 30+ companies. Interestingly enough, in 3 of the 5 cities we had people show up that were turned down during registration, for lack of room – so we actually exceeded our registration. This was the case in Canberra – Australia’s capital – with over 70 attendees. Unusual indeed! During my presentation I referenced several studies which highlight how this region is primed for support in looking at talent in the future as high growth creates talent shortages and talented workers see opportunities outside of their current employers. A Deloitte study shows that 61% of respondents in APAC expect significant or moderate talent shortages over the next year (compared to 45% and 31% for the Americas and EMEA respectively). Please accept my thanks to all who arranged and orchestrated this time in APAC. While my body was quite tired from the hectic schedule, my mind was energized with the interest and interaction.

  Read the article

• Why does sshd give a different identification when connecting through netcat?

  - by Robbie Mckennie

  I have been attempting to create a way to ssh into a machine hiding behind a firewall. I set up my ssh client with the option Proxycommand /usr/bin/ncat -l 2000, and then I connect it to sshd with ncat <client> 2000 -c "sshd -i" on the server. It works in that I can get a shell on the server, but the server sends a different key than when I use normal ssh. So the question is, why? Is the key different when sshd is called in this unusual way?

  Read the article

• Server suddenly running out of entropy

  - by Creshal

  Since a reboot yesterday, one of our virtual servers (Debian Lenny, virtualized with Xen) is constantly running out of entropy, leading to timeouts etc. when trying to connect over SSH / TLS-enabled protocols. Is there any way to check which process(es) is(/are) eating up all the entropy? Edit: What I tried: Adding additional entropy sources: time_entropyd, rng-tools feeding urandom back into random, pseudorandom file accesses – netted about 1 MiB additional entropy per second, problems still persisted Checking for unusual activity via lsof, netstat and tcpdump – nothing. No noticeable load or anything Stopping daemons, restarting permanent sessions, rebooting the entire VM – no change in behaviour What in the end worked: Waiting. Since about yesterday noon, there are no connection problems anymore. Entropy is still somewhat low (128 Bytes peak), but TLS/SSH sessions have no noticeable delay anymore. I'm slowly switching our clients back to TLS (all five of them!), but I don't expect any change in behavior now.

  Read the article

• What kinds of issues can one expect when changing a domain names registar? (3 questions)

  - by anonymous-one

  Assuming that there are no 'unusual' items that come up, what kind of disruptions can one expect when moving a domain between registrars? I understand some of the below may vary over registrars. But assuming both ends are large proficient registrars: a) Will the NS settings be mirrored? We use a dedicated dns service provider so we are not using the originating registrars name servers. All that we are concerned about is that the existing NS values are mirrored at the target registrar. b) Are incoming domain transfers automated on the target registrar end? Eg: If we begin the transfer process during business hours at the source registrar, will someone have to manually approve the inbound transfer (most likely during their business hours) at the target registrar? c) Is the domain ever 'in limbo'? At any time in the process is there ever a time when the NS values for the domain are not populated (as they were prior to initiating the transfer) OR one does not have access to populate them (at the target registrar)? Thank you kindly for the help.

  Read the article

• Tracking down memory issues affecting a website

  - by gaoshan88

  I've got a website (Wordpress based) that became unresponsive. I SSH'd into the server and saw that we were out of memory. Errors in my apache log files indicated the same... things failing to be allocated due to lack of memory). Restarting the server fixes it. So I look in access.log and error.log around the time of the incident but I see nothing strange. No extra traffic, no unusual requests. In fact the only request around the time of the problem was one from Googlebot for an rss feed... at that point I start to see 500 response codes in the logs until the machine was rebooted. I look in message.log hoping to see something but there is nothing at all for that entire day (which is odd as there are entries for every other day). The site has a large amount of memory allocated to it and normally runs using about 30% of what is available. My question... how would you go about trying to track this down at this point? What are some other log files I could check or strategies I could take?

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >