Search Results

Search found 20761 results on 831 pages for 'chef client'.

Page 70/831 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• CentOS Client - Unable to Establish iSCSI connection with multiple interfaces on the initiator

  - by slashdot

  So after upgrading to CentOS 6.2, I am seemingly no longer able to login into my iSCSI targets. I have multiple interfaces on different subnets on the system, and I first thought that it had to do with the fact that I may not be binding correct interfaces, which seems to be the case when looking at netstat, as this is clearly wrong: [root]? netstat -na|grep .90 tcp 0 1 10.10.100.60:42354 10.10.8.90:3260 SYN_SENT tcp 0 1 10.10.100.60:40777 10.10.9.90:3260 SYN_SENT I then went ahead and disabled all but one interface, and so as a result netstat appears to be correct, but the issue with login remains. I am positive that the target never sees a packet, because I see nothing by SYN_SENT. I know the problem is on my client, because the target is servicing multiple systems, none of which are CentOS 6.2. At this point I am pretty confident that some things changed between CentOS 6.0/6.1 and 6.2. So, if anyone have any thoughts, or ran into this, I would very much like to hear your thoughts. [root]? iscsiadm --mode node --targetname iqn.2011-12.dom.homer:01:lab-centos-servers-00001 --portal 10.10.8.90:3260,2 --interface=sw-iscsi-0 --login Logging in to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260] (multiple) iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals [root]? netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2.7 10.10.9.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3.7 10.10.100.0 0.0.0.0 255.255.252.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2.7 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3.7 0.0.0.0 10.10.100.1 0.0.0.0 UG 0 0 0 eth0 Output of ip addr show for the two interfaces involved: [root]? for i in 2.7 3.7; do ip addr show eth$i; done 6: eth2.7@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:8d brd ff:ff:ff:ff:ff:ff inet 10.10.8.60/24 brd 10.10.8.255 scope global eth2.7 inet6 fe80::20c:29ff:fe94:5b8d/64 scope link valid_lft forever preferred_lft forever 7: eth3.7@eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:97 brd ff:ff:ff:ff:ff:ff inet 10.10.9.60/24 brd 10.10.9.255 scope global eth3.7 inet6 fe80::20c:29ff:fe94:5b97/64 scope link valid_lft forever preferred_lft forever Update 01/06/2012: This issue is getting even more interesting by the day it seems. I went a few weeks back and grabbed a snapshot of this system from before upgrading to 6.2. I spun up a new system from the snapshot, and reconfigured interface info and host keys, as well as iSCSI initiator and iscsi interface info to match new MACs. Changed nothing else. Then, I attempted to connect to my targets, and no issues at all. I cannot say that this was unexpected. I then went ahead and compared sysctl settings from both systems and there were differences after the upgrade, but nothing seemingly relevant to iSCSI or IP that could contribute to this. I also noticed that by default now two sessions per connection were enabled after the upgrade, but I changed it back to 1 session in /etc/iscsi/iscsid.conf. On the problematic system we can see that source interface is seemingly wrong, but even when I disable the 10.10.100 interface, problems persist. So, while this may be relevant, I could not validate it for certain. Needless to say, further research is necessary. Something is clearly different between releases. Working system is on 6.1, and non-working is 6.2. ::Working System:: tcp 0 0 10.10.8.210:39566 10.10.8.90:3260 ESTABLISHED tcp 0 0 10.10.9.210:46518 10.10.9.90:3260 ESTABLISHED [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.210 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.210 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.210 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 ::Non-working System:: tcp 0 1 10.10.100.60:44737 10.10.9.90:3260 SYN_SENT tcp 0 1 10.10.100.60:55479 10.10.8.90:3260 SYN_SENT [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.60 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.60 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.60 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 And the result is still same: [root]? iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not login to [iface: sw-iscsi-1, target: iqn.2011-12.dom.homer:02:lab-centos-servers-00001, portal: 10.10.9.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals Update 01/08/2012: I believe I have been able to figure out the answer to my issue. It is quite obscure and I doubt this will happen to anyone else any time soon. It turns out that setting iface.iscsi_ifacename and iface.hwaddress in the interfaces configuration file is not legal. When one manually adds an iscsi target, such as below, all settings from the interface config file are copied into the node config file, that gets created by the below command. Result is parameters iface.iscsi_ifacename and iface.hwaddress together in the same config file. These parameters are seemingly mutually exclusive, which does not exactly make sense, or there is perhaps an oversight in the codepath. Perhaps I will investigate further. # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:01:lab-centos-servers-00001 -p 10.10.8.90,3260,2 -I sw-iscsi-0 # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:02:lab-centos-servers-00001 -p 10.10.9.90,3260,2 -I sw-iscsi-1 Notice, below I commented out iface.hwaddress and iface.ipaddress, after which I re-added targets, with same command as above. All works just fine. [root]? cat * # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-0 iface.net_ifacename = eth2.6 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.8.60 iface.transport_name = tcp iface.vlan_id = 6 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-1 iface.net_ifacename = eth3.7 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.9.60 iface.transport_name = tcp iface.vlan_id = 7 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD Again, chances of this happening to someone else are slim to none, so likely waste of time typing this up. But, if someone does encounter this issue, I hope this post will help.

  Read the article

• Using WCF DLL with VB6 ?

  - by Steven2ic

  I have a VB6 application that needs to communicate with a VS2008 VB.NET WCF server. I have built a VB.NET WCF DLL to be used on the client side, and it --almost-- works with the VB6 application. When I try to run the VB6 app in debug mode, I get "Could not find endpoint element with name 'NetTCPBinding_IComPortManager' and contract 'IComPortManager' in the ServiceModel client configuration section." Using a dummy VB.Net client app, with the same WCF DLL works fine. I presume that the VB6 app/WCF DLL is not finding app.config. Where should app.config be ? Is there a way to tell WCF where to find app.config ?

  Read the article

• How do you build a Request-Response service using Asyncore in Python?

  - by Casey

  I have a 3rd-party protocol module (SNMP) that is built on top of asyncore. The asyncore interface is used to process response messages. What is the proper technique to design a client that generate the request-side of the protocol, while the asyncore main loop is running. I can think of two options right now: Use the loop,timeout parameters of asyncore.loop() to allow my client program time to send the appropriate request. Create a client asyncore dispatcher that will be executed in the same asyncore processing loop as the receiver. What is the best option? I'm working on the 2nd solution, cause the protocol API does not give me direct access to the asyncore parameters. Please correct me if I've misunderstood the proper technique for utilizing asyncore.

  Read the article

• Java: Sockets or RMI?

  - by StillLearning

  Hi, I need to separate our application into a light-weight gui application and a business logic application. This won't be a client/server setup as such, as the 'server' component will only have one client. The other limitation in the application is that it has only one entry/exit point. Therefore if we were to use RMI, it would only ever be on one function. All form data is already wrapped up into a string and passed through one transport area. Should I just use Java Sockets to enhance this application, or go with RMI? Or some other Java technology? I made a previous post outlining the requirements of our application, however it went unanswered. http://stackoverflow.com/questions/2604528/terminal-panel-pc-single-server-solution-client-server-or-rdp Cheers.

  Read the article

• Setting post tags in wordpress via XMLRPC API when submitting a post?

  - by aviv

  Hi, I am trying to use WordPress API via XMLRPC to submit new posts. But i can't set the post tags (nor the categories). echo "Adding $term to blog via XMLRPC ..."; $client = new IXR_Client("http://$blog.wordpress.com/xmlrpc.php"); $content = array('title'=>$term, 'description'=>"All about $term", 'category'=>'barvaz,moshe', 'tags'=>'tag1,tag2'); $client->query('metaWeblog.newPost', 0, $username, $password, $content, true); $rv = $client->getResponse(); print_r($rv); Any idea?

  Read the article

• sending binary data via POST on android

  - by wo_shi_ni_ba_ba

  Android supports a limited version of apache's http client(v4). typically if I want to send binary data using content type= application/octet-stream via POST, I do the following: HttpClient client = getHttpClient(); HttpPost method=new HttpPost("http://192.168.0.1:8080/xxx"); System.err.println("send to server "+s); if(compression){ byte[]compressed =compress(s); RequestEntity entity = new ByteArrayRequestEntity(compressed); method.setEntity(entity); } HttpResponse resp=client.execute(method); however ByteArrayRequestEntity is not supported on android. what can I do?

  Read the article

• Designing a frontend/backend architecture

  - by wrp

  What are some good information sources on designing programs with a client/server architecture? This is for development of a desktop application, not a Web service. The only books I have found on client/server apps deal with the case of a thin client connecting to a remote database. Two good examples of what I mean are Mathematica and SuperCollider. I'm looking for platform- and language-agnostic discussion of the issues in developing a frontend/backend system. Especially useful topics would be allocation of responsibilities and options for message passing.

  Read the article

• Call REST service while impersonating a user that is already authorized to the glasfish server

  - by user1894489

  There are two web-applications deployed on a glassfish server. Both web applications provide a REST web service. the access to both web-services is secured via glassfish security constraints (at the moment BASIC Auth and file-realm). Let's say a user is accessing the service of web application A. After he is authorized, service A wants to call service B via REST client. Is there a way for a service to impersonate a user that is already authorized to the glasfish server? Maybe something like forwarding the security context or editing the headers? Is there another Filter? @Context private SecurityContext securityContext; username = securityContext.getUserPrincipal().getName(); password = ??? client.addFilter(new com.sun.jersey.api.client.filter.HTTPBasicAuthFilter(username, password)); Thanks!

  Read the article

• Should I use WPF or Windows Forms Application for my project in C#?

  - by RAJ K

  I am developing a Client-Server based application in which client application will access server database to store billing information. It will also have report generation facility. Windows Forms is good in document printing & I don't see such facility or controls in WPF. If I am wrong then please correct me. I want database security, which DB should I use, SQL Server, MySQL or Oracle. I would like to use free DB but security is my priority. Please suggest how I can implement a Client-Server architecture with multiple clients in C#? Thank you Geeks!!!

  Read the article

• Cisco VPNClient from Mac won't connect using iPhone Tethering

  - by Dan Short

  I just set up iPhone tethering from my Snow Leopard Macbook Pro to my iPhone 3GS with the Datapro 4GB plan from AT&T. When attempting to connect to my corporate VPN from the MacBook Pro with Cisco VPNClient 4.9.01 (0100) I get the following log information: Cisco Systems VPN Client Version 4.9.01 (0100) Copyright (C) 1998-2006 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Mac OS X Running on: Darwin 10.6.0 Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386 i386 Config file directory: /etc/opt/cisco-vpnclient 1 13:02:50.791 02/22/2011 Sev=Info/4 CM/0x43100002 Begin connection process 2 13:02:50.791 02/22/2011 Sev=Warning/2 CVPND/0x83400011 Error -28 sending packet. Dst Addr: 0x0AD337FF, Src Addr: 0x0AD33702 (DRVIFACE:1158). 3 13:02:50.791 02/22/2011 Sev=Warning/2 CVPND/0x83400011 Error -28 sending packet. Dst Addr: 0x0A2581FF, Src Addr: 0x0A258102 (DRVIFACE:1158). 4 13:02:50.792 02/22/2011 Sev=Info/4 CM/0x43100004 Establish secure connection using Ethernet 5 13:02:50.792 02/22/2011 Sev=Info/4 CM/0x43100024 Attempt connection with server "209.235.253.115" 6 13:02:50.792 02/22/2011 Sev=Info/4 CVPND/0x43400019 Privilege Separation: binding to port: (500). 7 13:02:50.793 02/22/2011 Sev=Info/4 CVPND/0x43400019 Privilege Separation: binding to port: (4500). 8 13:02:50.793 02/22/2011 Sev=Info/6 IKE/0x4300003B Attempting to establish a connection with 209.235.253.115. 9 13:02:51.293 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 10 13:02:51.894 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 11 13:02:52.495 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 12 13:02:53.096 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 13 13:02:53.698 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 14 13:02:54.299 02/22/2011 Sev=Warning/2 CVPND/0x83400018 Output size mismatch. Actual: 0, Expected: 237. (DRVIFACE:1319) 15 13:02:54.299 02/22/2011 Sev=Info/4 IKE/0x43000075 Unable to acquire local IP address after 5 attempts (over 5 seconds), probably due to network socket failure. 16 13:02:54.299 02/22/2011 Sev=Warning/2 IKE/0xC300009A Failed to set up connection data 17 13:02:54.299 02/22/2011 Sev=Info/4 CM/0x4310001C Unable to contact server "209.235.253.115" 18 13:02:54.299 02/22/2011 Sev=Info/5 CM/0x43100025 Initializing CVPNDrv 19 13:02:54.300 02/22/2011 Sev=Info/4 CVPND/0x4340001F Privilege Separation: restoring MTU on primary interface. 20 13:02:54.300 02/22/2011 Sev=Info/4 IKE/0x43000001 IKE received signal to terminate VPN connection 21 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700008 IPSec driver successfully started 22 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 23 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x4370000D Key(s) deleted by Interface (192.168.0.171) 24 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 25 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 26 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x43700014 Deleted all keys 27 13:02:54.300 02/22/2011 Sev=Info/4 IPSEC/0x4370000A IPSec driver successfully stopped The key line is 15: 15 13:02:54.299 02/22/2011 Sev=Info/4 IKE/0x43000075 Unable to acquire local IP address after 5 attempts (over 5 seconds), probably due to network socket failure. I can't find anything online about this. I found a single entry for the error message in Google, and it was a swedish (or some other nordic language site) that didn't have an answer to the question. I've tried connecting through both USB and Bluetooth tethering to the iPhone, and they both return the exact same results. I don't have direct control over the firewall, but if changes are necessary to make it work, I may be able to get the powers-that-be to make adjustments. A solution that doesn't require reconfiguring the firewall would be far better of course... Does anyone know what I can do to make this behave? Thanks, Dan

  Read the article

• Too many Bind query (cache) denied, DNS attack?

  - by Jake

  Once Bind crashed and I did: tail -f /var/log/messages I see a massive number of logs every second. Is this a DNS attack? or is there something wrong? Sometimes I see a domain in logs like this: dOmAin.com (upper and lower). As you see there is only one single domain in the logs with different IPs Oct 10 02:21:26 mail named[20831]: client 74.125.189.18#38921: query (cache) 'ns1.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.144.171#38833: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.17#42428: query (cache) 'ns2.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.146.27#37899: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 193.203.82.66#39263: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 8.0.16.170#59723: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 80.169.197.66#32903: query (cache) 'dOmAin.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 134.58.60.1#47558: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.146.34#47387: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 8.0.16.8#59392: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.19#64395: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 217.72.163.3#42190: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 83.146.21.252#22020: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.146.116#57342: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 193.203.82.66#52020: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 8.0.16.72#64317: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 80.169.197.66#31989: query (cache) 'dOmAin.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.18#47436: query (cache) 'ns2.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.16#44005: query (cache) 'ns1.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 85.132.31.10#50379: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 94.241.128.3#60106: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 85.132.31.10#59118: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 212.95.135.78#27811: query (cache) 'domain.com/A/IN' denied /etc/resolv.conf ; generated by /sbin/dhclient-script nameserver 4.2.2.4 nameserver 8.8.4.4 Bind config: // generated by named-bootconf.pl options { directory "/var/named"; /* * If there is a firewall between you and nameservers you want * to talk to, you might need to uncomment the query-source * directive below. Previous versions of BIND always asked * questions using port 53, but BIND 8.1 uses an unprivileged * port by default. */ // query-source address * port 53; allow-transfer { none; }; allow-recursion { localnets; }; //listen-on-v6 { any; }; notify no; }; // // a caching only nameserver config // controls { inet 127.0.0.1 allow { localhost; } keys { rndckey; }; }; zone "." IN { type hint; file "named.ca"; }; zone "localhost" IN { type master; file "localhost.zone"; allow-update { none; }; }; zone "0.0.127.in-addr.arpa" IN { type master; file "named.local"; allow-update { none; }; };

  Read the article

• Gmail & yahoo - offline mail viewer for mac osx

  - by sagar

  Hello ! Every one. My question are divided into two parts ----------------------- 1 ---------------------------- I am having a difficulty regarding receiving my mails. I have 3 gmail accounts & 1 yahoo account. In windows, I use Microsoft outlook or microsoft outlook express. But In mac is there any inbuilt software for it ? If not, is that any freely available mail client for mac osx ? ----------------------- 2 ---------------------------- One more thing, My system administrators has banned regular gmail & yahoo sites. Means I can't use gmail or yahoo site for mailing. Ok. I don't want to break my office rules - but what about my mails on gmail & yahoo, they are really very important for me. Means that - I just want to access incoming mails nothing more than that.

  Read the article

• Can't connect to a machine via Cisco VPN on Mac

  - by Alex

  Hi there, I have a curious problem. I can connect to work's vpn using Cisco VPN Client. I can get internet through that vpn. When I go check the IP online it tells me the IP address of the server I connected. However, when I try to ping one of the machines at work I get nothing. And traceroute says there is no route to the destination. But works for google. Any ideas? Is some traffic not sent through the VPN on mac Alex

  Read the article

• Cisco VPN disconnects after 5 seconds with error 422

  - by Marius

  I'm trying to connect to my university's server with VPN using Cisco VPN Client version 5.0.04, but after 5 seconds it disconnects with the error message 422: Lost contact with the secure gateway. Check your connection. From my research on the net it seems this could be because it tries to find my IP, and finds out that this is 127.0.0.1. Then 5 seconds later it discovers that I have a new IP (my actual IP), and it disconnects because I'm not allowed to change IP. Does anyone know how I could fix this, or if there is another reason i get this error? Update I looked through the log, and found this error, which confirms what I thought, except it gets the correct IP first, then changes it to localhost. 87 18:56:53.250 08/24/09 Sev=Warning/3 CM/0xA3100027 Adapter address changed from 149.171.237.25. Current address(es): 127.0.0.1.

  Read the article

• Evolution Gmail Mashup + Fixing Time stamp

  - by Dan

  I wanted to migrate my university email (including subfolders) to my gmail account. Since gmail only imports POP3 which doesn't have subfolders, I had to connect to both gmail and my university mail using an email client (I am using Evolution) and then drag each folder from my university account to my gmail account. This worked for the most part, but the time stamp on every email I dragged over from my university account to gmail reads as todays date, when it was dragged over. If I enter the email and hit details it shows the actual sent date. How can I get it to not overwrite the received date when transferring? (as I assume this is what is happening). Thanks

  Read the article

• Connecting a network drive only when the VPN is connected?

  - by leeand00

  I have a thumb drive that I want to be able to connect to the same place over the network at one location as it is locally. Sometimes I leave it at the other location, but usually if I'm going to back it up, I back it up locally for network traffic. Is there a way to automatically connect the thumb drive when I connect to the VPN? (Always to the same drive letter...and obviously skip connecting it if it's already plugged in locally and the VPN is connected...) I'm using a Cisco VPN Client 5.x

  Read the article

• New Outlook 2003 message, cursor sometimes goes to body, sometimes goes to "To:" field

  - by normalocity

  I've got an Outlook 2003 client that, when you click on "New message", about half the time the cursor defaults to being in the "body" of the message, and the other half of the time it defaults to the cursor being in the "To:" field. Anyone know why this might be happening? Thought it might be related to having Word set, or not set, to be the default email editor, but that had no effect. Also, this particular user reports that, on their previous machine, it always defaults to the "To:" field. I happen to still have that machine around, unmodified from when it was removed from the, and they are correct - it never goes to the body. I also read that some people had this issue and turned off the "Outlook today" feature to fix it, with mixed results. However, in this case the "Outlook today" feature isn't even turned on.

  Read the article

• How to setup PPTP-VPN on ubuntu and how to run ?

  - by NAVEED

  I was using my cable internet on windows and it was working. Now I moved to ubuntu for development work. But I am unable to connect this internet on ubuntu. I called their technical support and they ask me to install PPTP (I have forgot the exact name) and then provide our server name, my username and passowrd. I downloaded(from windows internet) PPTP debian and install it but I did not find it after installation. From where can I use this client?? can someone tell me that how to install PPTP on ubuntu without internet and how to run this software and how to use? Thanks

  Read the article

• How to setup PPTP-VPN on ubuntu and how to run ?

  - by NAVEED

  I was using my cable internet on windows and it was working. Now I moved to ubuntu for development work. But I am unable to connect this internet on ubuntu. I called their technical support and they ask me to install PPTP (I have forgot the exact name) and then provide our server name, my username and passowrd. I downloaded(from windows internet) PPTP debian and install it but I did not find it after installation. From where can I use this client?? can someone tell me that how to install PPTP on ubuntu without internet and how to run this software and how to use? Thanks

  Read the article

• "System.Data.OracleClient requires Oracle client software version 8.1.7 or greater." Error Message

  - by Jandost Khoso

  Quick resolution: Give full permission to AUTHENTICATED USERS in following folders. a) ORACLE_HOME b) Program Files\ORACLE   Check your PATH. You might have installed different clients in your system and your .NET application is pointing to a home with inappoperiate client. What your .NET application should load is OCI.DLL with File version more than 8.1.7. According to the MSDN document Oracle and ADO.NET:   "The .NET Framework Data Provider for Oracle provides access to an Oracle database using the Oracle Call Interface (OCI) as provided by Oracle Client software. The functionality of the data provider is designed to be similar to that of the .NET Framework data providers for SQL Server, OLE DB, and ODBC. "     The MSDN document System Requirements (Oracle) says: "The .NET Framework Data Provider for Oracle requires Microsoft Data Access Components (MDAC) version 2.6 or later. MDAC 2.8 SP1 is recommended. You must also have Oracle 8i Release 3 (8.1.7) Client or later installed. "   Both the .NET Framework Data Provider for Oracle and Oracle Data Provider for .NET are data providers to access Oracle database. The former ships with .NET Framework and requires Oracle client version 8.1.7 or above. The latter is provided by Oracle company and requires Oracle client version 9.2 or later.     The Oracle Data Provider for .NET (ODP.NET) features optimized ADO.NET data access to the Oracle database. ODP.NET allows developers to take advantage of advanced Oracle database functionality, including Real Application Clusters, XML DB, and advanced security.   See the document Comparing the Microsoft .NET Framework 1.1 Data Provider for Oracle and the Oracle Data Provider for .NET for more information about the difference.

  Read the article

• Single NFS folder shared across multiple clients

  - by parthi_for_tech

  I'm trying to mount a single NFS folder from server say "/share/folder" to multiple clients up to 32 clients, and the clients tries to access the folder and create files. The problem I'm facing is that when I execute the write command I see only one client is able to access the folder the remaining clients are blocked and not able to proceed to write. So, is whatever I'm trying to do above is correct? Can we write/read files from the same folder on multiple clients? if yes how can I do it prallel? Kindly advice! Thanks

  Read the article

• How do I remote desktop to my work's Windows box from my Mac at home through VPN?

  - by CT

  I would like to remote desktop from my Macbook to my Work's laptop from home. I connect to the work's network via Cisco VPN. My Cisco VPN clients connects fine in Mac OS X but I am unable to remote desktop. I am also unable to ping my work laptop. The laptop is powered on and not sleeping. I can access it via LogMeIn. If I were to actually pug into our network at the building. I can remote desktop to my work laptop from my Macbook. If I use a Windows virtual machine and connect using the Windows Cisco VPN client, I am able to RDP and ping my work laptop. What is wrong with my OS X VPN connection?

  Read the article

• How do I remote desktop to my work's Windows box from my Mac at home through VPN?

  - by CT.

  I would like to remote desktop from my Macbook to my Work's laptop from home. I connect to the work's network via Cisco VPN. My Cisco VPN clients connects fine in Mac OS X but I am unable to remote desktop. I am also unable to ping my work laptop. The laptop is powered on and not sleeping. I can access it via LogMeIn. If I were to actually pug into our network at the building. I can remote desktop to my work laptop from my Macbook. If I use a Windows virtual machine and connect using the Windows Cisco VPN client, I am able to RDP and ping my work laptop. What is wrong with my OS X VPN connection?

  Read the article

• Why can't email clients create rules for moving dates like "yesterday"?

  - by Morgan

  I've never seen an email client that I could easily create a rule to do something like "Move messages from yesterday to a folder?" Is there some esoteric reason why this would be difficult? I know I can easily create rules around specific dates, but that isn't the same thing by a long shot; am I missing something? In Outlook 2010 I can create search folders that do sort of this type of thing, but you can't create rules around a search folder... seems like either I am missing something major, or this is terribly short-sided.

  Read the article

• Trying to mount an NFS directory from a Mac with another user

  - by Yair

  I have a username on an ubuntu server, lets call it user a. I want to mount a directory from that server to my Mac, on which I have another username, lets call it user b. My problem is that, after I mount the directory (using the disk utility app) I can view files on the server but can't modify or create new files on it. I checked, and if I change the permissions of the server directory so that its open to everyone (chmod 777), I can write to it. So what I need to know, is how can I specify the username and password in the NFS client when setting up the mount? That is, I want to specify that I'm trying to log in as user a to the server.

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >