Search Results

Search found 3399 results on 136 pages for 'direct'.

Page 70/136 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• Copy to USB memory stick really slow?

  - by Eloff

  When I copy files to the USB device, it takes much longer than in windows (same usb device, same port) it's faster than USB 1.0 speeds (1MB/s) but much slower than USB 2.0 speeds (12MB/s). To copy 1.8GB takes me over 10 minutes (it should be < 3 min.) I have two identical SanDisk Cruzer 8GB sticks, and I have the same problem with both. I have a super talent 32GB USB SSD in the neighboring port and it works at expected speeds. The problem I seem to see in the GUI is that the progress bar goes to 90% almost instantly, completes to 100% a little slower and then hangs there for 10 minutes. Interrupting the copy at this point seems to result in corruption at the tail end of the file. If I wait for it to complete the copy is successful. Any ideas? dmesg output below: [64059.432309] usb 2-1.2: new high-speed USB device number 5 using ehci_hcd [64059.526419] scsi8 : usb-storage 2-1.2:1.0 [64060.529071] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 1.14 PQ: 0 ANSI: 2 [64060.530834] sd 8:0:0:0: Attached scsi generic sg4 type 0 [64060.531925] sd 8:0:0:0: [sdd] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [64060.533419] sd 8:0:0:0: [sdd] Write Protect is off [64060.533428] sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00 [64060.534319] sd 8:0:0:0: [sdd] No Caching mode page present [64060.534327] sd 8:0:0:0: [sdd] Assuming drive cache: write through [64060.537988] sd 8:0:0:0: [sdd] No Caching mode page present [64060.537995] sd 8:0:0:0: [sdd] Assuming drive cache: write through [64060.541290] sdd: sdd1 [64060.544617] sd 8:0:0:0: [sdd] No Caching mode page present [64060.544619] sd 8:0:0:0: [sdd] Assuming drive cache: write through [64060.544621] sd 8:0:0:0: [sdd] Attached SCSI removable disk

  Read the article

• Any mobile-friendly Credit Card billing solutions for mobile sites similar to Bango?

  - by Programmer

  Are there any mobile-friendly Credit Card billing solutions for mobile sites similar to Bango? The advantages of Bango I have seen compared to regular Credit Card solutions that make it considerably "mobile-friendly" are: 1) It does not require the user to enter their full name and billing address to make a payment. The user is only required to enter their Credit Card number, expiration date, and CVC code (if they are in the U.S., they will also have to enter their Zip Code). That is significantly less input than is normally required for Credit Card payments, which is a big plus on small mobile key pads. After a user makes an initial Credit Card payment, their details are stored by Bango, and the next time the user needs to make a payment with the same Credit Card, they just have to click a single link and it processes the payment on their stored Credit Card. Needless to say, this is very convenient for mobile users as it is analogous to Direct Carrier Billing as far as the user is concerned since they won't need to input any details. The downside with Bango is that their fees are higher than others, all payments must be processed via their site and branding, there is a high minimum ($1.99) and a low maximum ($30) on how much you can charge users, and you need to pay a monthly fee on top of the high transaction costs. It is due to the downsides mentioned above that I am looking for an alternative solution that also does the advantages 1) and 2) above. Is there anything like that? I looked at JunglePay and they do neither 1) nor 2).

  Read the article

• Is there a typical career path to learn game development "on the job"?

  - by mac

  The extended version of the question is: what is the typical career paths that a developer without specific experience in game development should take if he/she wishes to work in the game development industry? In other words, what are the positions such a programmer might aspire to get hired for, in the game industry? I am asking because it seems to me that - even without direct experience with 3D modelling, physics engines, shaders, etc... - for as much complex as these topics might be - they are still "just" top layers one can learn "on the job" if he/she has already good programming skills and experience in software design (for example during peer-programming sessions). I have no knowledge whatsoever of the game industry, so maybe I am being naïve here, but for all the other programming jobs I previously took, I learnt most of the specificities while working on concrete projects... so I wonder if there is a chance to do the same with game development. Thanks for your time and advice! :) PS: I don't know if this is important or not for answering the question, but scripting languages are the languages I am more proficient in. /mac

  Read the article

• Interaction between two Clouds

  - by user7969

  I have setup the Cloud-A with 1 - [CLC+CC] and 2 - [NC] computers. I have another Cloud-B with same configuration. [using the Ubuntu Enterprise Cloud] Both of them working fine individually, in the same LAN. Now if I want to add the NC of Cloud-A to CC of Cloud-B, [in case the resources of Cloud-B are exhausted] how can I make it possible ? I guess this calls for the interoperability stuff... Could you please explain what happens exactly when we ask for instance, the direct interaction happens between the client and NC or it goes through the CLC and CC ? What I want to say is, say there are multiple cloud providers. A user is subscribed to any one of them, say Cloud-A for IaaS. As the requirements are dynamic, all the resources of Cloud-A may get exhausted. There may be another Cloud-B which can provide the services but that Cloud-A can't ask the client to go for Cloud-B. So if it is possible to have some co-ordination between this two providers to share resources mutually, making client fully unaware of whats going on in the background....? Please reply.. I am sorry if I'm doing mistake anywhere... Thanks in advance :)

  Read the article

• The Power of Specialization – google ads for SOA & BPM Specialized Partners

  - by JuergenKress

  For SOA & BPM specialized partner we offer free google advertisement to promote your Oracle SOA & BPM service offerings on your website or your SOA & BPM events. We will host the complete campaign management. To create your google campaign please send us below: Your campaign text: 3 lines of text each 35 letters (NOT more letters!) Your campaign link: direct link to the website you want to promote Ideas for the website which we will promote with the google ads: Your Oracle SOA Service offerings with concrete offering e.g. SOA Discovery Workshop Oracle SOA Specialized Logo Your Oracle SOA References Your SOA Implementation consultant with pictures Your SOA sales contact persons Example of an SOA Specialization text ad: Oracle SOA Specialized plan to become more agile? eProseed the Oracle SOA Experts An interview with Griffiths Waite's Business Development Director highlighting the benefits of the Oracle Specialization Programme. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: Specializaion,Benefits Specialization,marketing,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• IDC Recommends Oracle Solaris 11

  - by user12611852

  IDC published a research report this week on Oracle Solaris 11 and described it as "Delivering unique value."  The report emphasizes the ability of Oracle Solaris to scale up and provide a mission critical platform for a wide variety of computing. Solaris built-in server and network virtualization helps to lower costs and enable consolidation while reducing administration costs and risks. Learn more about Oracle Solaris and the recently announced 11.1 update. In their conclusion, IDC reports: Today, Oracle is a multi-OS vendor that is adjusting to the opportunities presented by a significantly expanded product portfolio. The company has a long history of supporting Unix operating systems with its broad product portfolio, but the main difference is that now Oracle has direct control over the destiny of the Solaris operating system. The company has made a strong commitment to Solaris on both SPARC and x86 systems, as well as to Linux on x86 systems, and expects to continue to enhance Oracle Solaris 11 with update releases once a year as well as Solaris 12, which is already on the road map. Oracle is working to help its customers understand its strong commitment to Oracle Solaris and the product's role as a single operating system that runs on both SPARC and x86 processors. While Oracle Solaris and Oracle Linux are critical assets, the company's crown jewel is the deep collection of software that runs on top of both Oracle Solaris and Oracle Linux, software that creates a robust application environment. The continuing integration and optimization of the software and hardware stack is a differentiator for Oracle and for customers that run an Oracle Solaris stack.

  Read the article

• Enablement 2.0 Get Specialized!

  - by mseika

  Enablement 2.0 Get Specialized! Oracle PartnerNetwork Specialized program is releasing new certifications on our latest products, and partners are invited to be the first candidates.  Oracle Fusion Customer Relationship Management 11g Sales Essentials Exam (1Z0-456) – now in Production! All Beta exam participants will receive their exam scores as of September 24, 2012. The successful candidates will receive their certificates starting mid-October, 2012. Oracle Fusion Human Capital Management 11g Human Resources Essentials Exam (1Z0-584) – now in Production! All Beta exam participants will receive their exam scores as of September 27, 2012. The successful candidates will receive their certificates starting mid-October, 2012. Oracle Fusion Human Capital Management 11g Talent Management Essentials Exam (1Z0-585) – now in Production! All Beta exam participants will receive their exam scores as of September 27, 2012. The successful candidates will receive their certificates starting mid-October, 2012.  Contact UsPlease direct any inquiries you may have to Oracle Partner Enablement team at [email protected].

  Read the article

• Enablement 2.0 Get Specialized!

  - by mseika

  Enablement 2.0 Get Specialized! Oracle PartnerNetwork Specialized program is releasing new certifications on our latest products, and partners are invited to be the first candidates.  Oracle Fusion Customer Relationship Management 11g Sales Essentials Exam (1Z0-456) – now in Production! All Beta exam participants will receive their exam scores as of September 24, 2012. The successful candidates will receive their certificates starting mid-October, 2012. Oracle Fusion Human Capital Management 11g Human Resources Essentials Exam (1Z0-584) – now in Production! All Beta exam participants will receive their exam scores as of September 27, 2012. The successful candidates will receive their certificates starting mid-October, 2012. Oracle Fusion Human Capital Management 11g Talent Management Essentials Exam (1Z0-585) – now in Production! All Beta exam participants will receive their exam scores as of September 27, 2012. The successful candidates will receive their certificates starting mid-October, 2012.  Contact UsPlease direct any inquiries you may have to Oracle Partner Enablement team at [email protected].

  Read the article

• Oracle?BI??????

  - by ?? ?? (Noriko Takada)

  Oracle????? BI?????????????? Oracle BI Oracle Essbase Oracle BI Standard Edition (Oracle Discoverer) Oracle BI Applications   ?????????????????????   ?1. Oracle BI??????(?)Oracle BI 11g????!????????????????????Siebel???????11g????Oracle????????????? Oracle BI?????????????????????? Oracle BI Suite Enterprise Edition Plus Oracle BI Standard Edition One Oracle BI Foundation Suite 3????Foundation Suite??????BI 11g???????????????????????Essbase??????????????????????????????????????????BI Publisher??????? ???????????????????????Oracle Direct????????????? SE One????????????????????????????   ?2. Oracle Essbase????Hyperion??????????????????? EPM???????????????????Oracle BI 11g?????Essbase?????????????????????????ROLAP?MOLAP?????Oracle BI 11g???????????·????????   ?3. Oracle Discoverer???????Oracle???????BI?????   ?4. Oracle BI Applications???Oracle BI?????????????????????????? ?????????????????????ETL???BI??????????????

  Read the article

• Working as a contractor--questions part II

  - by universe_hacker

  This is a follow-up to this discussion: Working as a contractor--questions I still would like to get more info on the following points, when working as a contractor as opposed to direct employee: Housing: for short-term contracts (let's say 6 months or less) that are not in your home area, where and how do you search for short-term, flexible housing? Especially since an employer would typically want you to start immediately, so you don't have the time to go out and explore. Also, would you typically look for furnished apartments because the cost transporting your own furniture for a few months is not justified? Work hours and pay: are contractors more strictly supervised (as far as getting specified work done) because they get paid by the hour? There are also supposed to get overtime pay (at a higher rate) if they work more than 40 hours per week, does this really happen? Or do they work unpaid extra hours just like many regular employees? Some potential employers have mentioned paying the "per diem", which is essentially a non-taxable daily allowance, which is supposed to be used for living expenses. This money gets subtracted from you per-hour rate, but the advantage is that you pay less tax. However, from the information I have seen, the per diem can only be paid if you maintain a "permanent" residence you intend to return to. Is this checked in practice, and if yes, how?

  Read the article

• Impact Earth Lets You Simulate Asteroid Impacts

  - by Jason Fitzpatrick

  If you’re looking for a little morbid simulation to cap off your Friday afternoon, this interactive asteroid impact simulator makes it easy to the results of asteroid impacts big and small. The simulator is the result of a collaboration between Purdue University and the Imperial College of London. You can adjust the size, density, impact angle, and impact velocity of the asteroid as well as change the target from water to land. The only feature missing is the ability to select a specific location as the point of impact (if you want to know what a direct strike to Paris would yield, for example, you’ll have to do your own layering). Once you plug all that information in, you’re treated to a little 3D animation as the simulator crunches the numbers. After it finishes you’ll see a breakdown of a variety of effects including the size of the crater, the energy of the impact, seismic effects, and more. Hit up the link below to take it for a spin. Impact Earth [via Boing Boing] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• Broadcom Wireless Issues in Lubuntu 14.04

  - by ratxinxaxcage67

  I recently installed Lubuntu 14.04 on my parents' old laptop, and I've been having a super difficult time getting the Broadcom card up and running. I've been following this thread: Installing Broadcom Wireless Drivers ...but I'm still stuck. lspci -vnn | grep Network showed: 06:05.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 02) iwconfig showed: lo no wireless extensions. eth0 no wireless extensions. I've installed b43-firmware-installer and b43-fwcutter and also the linux-firmware-nonfree package. At boot, I keep getting a b43-phy0 error, so I tried sudo rmmod b43, and I got: rmmod: ERROR: Module b43 is not currently loaded I also tried: dmesg | grep b43 [ 17.318405] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4) [ 17.384870] b43legacy-phy0: Loading firmware b43legacy/ucode4.fw [ 18.046777] b43legacy ssb0:0: Direct firmware load failed with error -2 [ 18.046785] b43legacy ssb0:0: Falling back to user helper [ 18.047858] b43legacy-phy0 ERROR: Firmware file "b43legacy/ucode4.fw" not found or load failed. [ 18.047965] b43legacy-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3). I went to url it told me to, but it didn't tell me to do anything I haven't already tried. Any help and/or suggestions would be greatly appreciated!

  Read the article

• Which is the best image hosting site for hosting images for website? [closed]

  - by rahul dagli

  I currently have a website and blog and using a limited web hosting plan. When I upload images on my hosting server it consumes a lot of bandwidth and space. So I was thinking of hosting images on some-other image hosting site and direct linking it to my site. I found out few sites like imageshack, photobucket, tinypic, imgur. However, I see all have certain restrictions. The features i am looking for are as follows: 1. At least 10gb space 2. At least 500gb bandwidth (bec I hav very high traffic) 3. Very high speed even during heavy load like 1000 visitors accessing every hour. 4. Ultra reliable servers (99.9% uptime) 5. Privacy control 6. Must not ever delete image if inactive 7. Create and manage albums 8. Company that will last long in business atleast for next 10 years. 9. Free of cost 10. Hotlinking/ Directlinking image.

  Read the article

• How to represent a graph with multiple edges allowed between nodes and edges that can selectively disappear

  - by Pops

  I'm trying to figure out what sort of data structure to use for modeling some hypothetical, idealized network usage. In my scenario, a number of users who are hostile to each other are all trying to form networks of computers where all potential connections are known. The computers that one user needs to connect may not be the same as the ones another user needs to connect, though; user 1 might need to connect computers A, B and D while user 2 might need to connect computers B, C and E. Image generated with the help of NCTM Graph Creator I think the core of this is going to be an undirected cyclic graph, with nodes representing computers and edges representing Ethernet cables. However, due to the nature of the scenario, there are a few uncommon features that rule out adjacency lists and adjacency matrices (at least, without non-trivial modifications): edges can become restricted-use; that is, if one user acquires a given network connection, no other user may use that connection in the example, the green user cannot possibly connect to computer A, but the red user has connected B to E despite not having a direct link between them in some cases, a given pair of nodes will be connected by more than one edge in the example, there are two independent cables running from D to E, so the green and blue users were both able to connect those machines directly; however, red can no longer make such a connection if two computers are connected by more than one cable, each user may own no more than one of those cables I'll need to do several operations on this graph, such as: determining whether any particular pair of computers is connected for a given user identifying the optimal path for a given user to connect target computers identifying the highest-latency computer connection for a given user (i.e. longest path without branching) My first thought was to simply create a collection of all of the edges, but that's terrible for searching. The best thing I can think to do now is to modify an adjacency list so that each item in the list contains not only the edge length but also its cost and current owner. Is this a sensible approach? Assuming space is not a concern, would it be reasonable to create multiple copies of the graph (one for each user) rather than a single graph?

  Read the article

• Add an entry for Ubuntu on Windows 8 boot loader

  - by John

  I have installed Ubuntu 12.10 by creating free space in Windows 8 and then using that space to create 3 partitions, one for SWAP, one for GRUB (mounting point is /boot) and one for the actual OS. I did this so the Windows 8 boot loader wouldn't be overwritten in case I ever wanted to remove Ubuntu. I can still boot into Ubuntu if I select the boot loader from the BIOS. I want to add Ubuntu to the Windows 8 boot loader and I've been told to use EasyBCD. The issue with that is it doesn't actually direct Windows to the GRUB file, but rather to something like autogrub0.mri. I have found another programme called Visual BCD which will allow me to actually set the bootloader paths and drives. From here, I don't quite know what to do. I believe I have it set to the correct drive but I don't know if I'm directing to the right file. I think it's /boot/grub/x86_64-efi/grub.efi. I don't know if that's the right file, if I need to remove /boot or if the / need to be \ as that's what Windows uses. Sorry for such a lengthy post, please help!

  Read the article

• Nvidia GeForce Gt-520M-cn on intel dh61ww Ubuntu 12.04

  - by j goseeped

  hi people i hope you can help a little bit , i appreciate your time look: i have a this desktop i7 2600, 8gb ram ddr3, board intel dh61ww, Geforce Nvidia GT520-cn 2Gb ddr3, i just install ubuntu 64bits 12.04 kernel 3.2.0-23-generic , i want to setup two monitors samsung led 22" and get start mi video card 1) i download and installed nvidia driver 295.59 and also try with 302.17 to apt-update and upgrade, apt-get install build-essential linux-headers-$(uname -r), apt-get remove --purge nvidia*, apt-get remove --purge xserver-xorg-video-nouveau, vim /etc/modprobe.d/blacklist.conf blacklist vga16fb blacklist nouveau blacklist rivafb blacklist nvidiafb blacklist rivatv sh NVIDIA.run, sudo service lightdm start, reboot, nvidia-xorgconf 2)after reboot i get 800x600 and nvidia-settings say this. You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. 3) i change a little bit xorg.conf to set up a resolution to work property 4) i dont have any image in the monito and i dont have any option on Nvidia X server settings lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) egrep -i 'glx|nvidia' /var/log/Xorg.0.log [ 12.005] (II) LoadModule: "glx" [ 12.005] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.575] (II) Module glx: vendor="NVIDIA Corporation" [ 12.585] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012 [ 12.585] (II) Loading extension GLX [ 13.037] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9) glxinfo | grep direct Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig sorry my english is no very well. and thanks guys

  Read the article

• JVM Language Summit in July

  - by Tori Wieldt

  A reminder that the 2012 JVM Language Summit is happening July 30–August 1, 2012 in Santa Clara, CA. The JVM Language Summit is an open technical collaboration among language designers, compiler writers, tool builders, runtime engineers, and VM architects, sharing their experiences as creators of programming languages for the JVM, and of the JVM itself. Non-JVM developers are welcome to attend or speak on their runtime, VM, or language of choice. About 70 language and VM implementers attended last year—and over one third presented. What’s at the JVM Language Summit? Three days of technical presentations and conversations about programming languages and the JVM. Prepared talks by numerous visiting language experts, OpenJDK engineers, and other Java luminaries. Many opportunities to visit and network with your peers. Da Vinci Machine Project memorabilia. Dinner at a local restaurant, such as last year’s Faultline Brewing Company. A chance to help shape the future of programming languages on the JVM. Space is limited: This summit is organized around a single classroom-style room, to support direct communication between participants. To cover costs, there is a nominal conference fee of $100. Learn more.

  Read the article

• Twinview broken on upgrade to ubuntu 10.10

  - by mapkyca

  I have been on 9.10 for over a year on the grounds that if it ain't broke, don't fix it. However, I had a spare weekend and figured it was probably about time... I performed an upgrade to 10.4, and everything seemed to proceed smoothly, so I took the plunge and went for 10.10. Disaster. My twinview Nvidia display which had been working perfectly is now broken. On boot everything seems fine, but when X starts and the second monitor springs into life the primary winks out and switches off - almost as if its been put into an unsupported display mode. The system seems to think there's a second monitor - the nvidia logo is split across the two screens, but it can't seem to start. Things I've tried: Swapping the monitors (one is older than the other, and its definitely the port not the actual monitor) Rolling back to an old Xorg conf from prior to the upgrade Installing a non-beta driver direct from Nvidia (this seems to start both monitors but then apparently stops boot and causes the second display to 'wink'. Twinview seems non-functional, both displays are mirrors) Disabling EDID Disabling twinview, logging in and attempting to use the Nvidia config to re-detect the monitors (second monitor is falsely detected and won't go higher than 1024x768. Selecting 'apply' causes one screen to go blank and the other to display garbage) googling for about 5 hours looking for similar problems, none of the offered solutions seemed to work I'm at a loss, and it is looking very much like I'm going to have to go through a time consuming reinstall to downgrade back to the working 10.4. Any thoughts?

  Read the article

• Turn O&M Operations into Optimized Projects with Oracle Primavera

  - by mark.kromer

  Oracle enterprise project portfolio management with Primavera is much more than optimizing project performance and eliminating project failure on new projects, capital programs, etc. A very common use case that we see is small-scale frequent and recurring projects based on on-going operations and maintenance. As opposed to assigning resources to various activities when you are building a new network infrastructure, for example, Oracle has teamed-up the Primavera and eBusiness Suite teams to provide direct integration for work orders from Oracle's Enterprise Asset Management (eAM) system to populate into Primavera P6 project schedules. So now that your network infrastructure build-out project is complete, planners and operations managers can use the world-class what-if and scheduling capabilities in Primavera tools to assign work orders, maximize resource utilization and to reuse templates for typical O&M operations in Primavera and share that back to the operations teams using eAM for maintenance. Also, large-scale maintenance operations related to large assets in the asset lifecycle will include phase-outs, shutdowns and turn-arounds which are classic maintenance projects, as opposed to building something new, that Oracle Primavera with Oracle e-Business Suite provides full coverage to optimize your ALM processes in your business. Read more about these new capabilities from Oracle in the ERP space from the Oracle eAM data sheet.

  Read the article

• Offshoring: does it ever work?

  - by DanSingerman

  I know there has been a fair amount of discussion on here about outsourcing/offshoring, and the general opinion seems to be that at best it is difficult, and at worst it fails. I have direct experience of offshoring myself; a previous company where I was a dev manager wanted to send some development offshore, and we ran a pilot scheme to see how well it would work. Of course it was a complete failure, although it is not completely clear to me whether this was down to the offshore devs being less talented, the process, or other factors (no doubt it was really a combination). I can see as a business how offshoring looks attractive (much lower day rate), but as far as I can see, the only way it could possibly work is if you do exceptionally detailed design up front, with incredibly detailed specifications; and by the time you have invested in producing that, you have probably spent as nearly as much as if you had written the actual code locally (which I think is an instance of No Silver Bullet) So, what I want to know is, does anyone here have any experience of offshoring actually working ever? Especially if there are any success stories of it working in a semi-agile way? I know there are developers here from all over the World; has anyone worked on an offshore project they consider successful?

  Read the article

• Best way to protect website application code

  - by Gaz_Edge

  Background I have a web application that I host on my own server. I have clients who use the application as is, but some have asked if they can host the application on their own server. This enables them to have their own URLS rather than mine. The application only forms part of their website so I'm assuming it will not be possible for my server to respond to a direct call to their domain etc To give some examples, i currently have urls like www.mydomain.com/profile, www.mydomain.com/index.php?option=someoption&view=someview&id=1 What my clients' want is www.theirdomian.com/profile, www.theirdomian.com/index.php?option=someoption&view=someview&id=1 etc Question My question is, what is the best way for me to allow them to use their own URLs with my application, without giving them all the backend source code and databases to install on their server? One way I thought would be to create a router.php file that sits on their server. The router then asks my server to output the html. The router modifies all the links etc in the html source and outputs the new html through the clients server. When a link is clicked on the clients site, the router receives the request and modifies the url to get the data from my server etc. Is this an effective way to achieve what I want, or is it way off the mark.

  Read the article

• With Google Analytics, is it possible to check a specific page in Multi-Channel conversion attribution?

  - by Emmett R.

  I'm somewhat new to Google Analytics, and I'm trying to track all conversions that are assisted by a particular landing page, because I don't expect an instant purchase. I have e-commerce tracking set up. Due to the constraints of the associated ad campaign, I can't include the source/medium code in the url when people go to the landing page, and all of my traffic to the landing page is likely to be direct, so I'm not sure how to tell Multi-Channel marketing that it's a significant page. I know how to add events to a page, but I'm still figuring out what they can and cannot do. Would creating a redirect from the landing url to an identical url+source/medium code work? Any advice on how to accomplish this would be greatly appreciated. Tracking the final sale conversion is not the issue. Ecommerce reporting is functioning just fine on the site. I just want to report the landing page as an assist, whenever it shows up in the funnel, and I need to be able to do that across multiple visits.

  Read the article

• Is it worth replacing mouse by standalone trackpad for heavy code-editing? [on hold]

  - by heltonbiker

  I recently got more interested in improving my tools, workspace and worflow. The first sting came with a sore finger due to a crappy keyboard, and then after some research I fell in love with the "mechanical keyboard is what you need" doctrine, bought one (cherry MX Brown if you're curious), and am very happy with the results. Currently I am replacing my previous text editor (Geany) with Sublime Text 3, and am also very happy and feeling much more powerful and professional :) Well, but while I re-read all the ancient debates about VIM vs whatever-else, the following excerpt from a blog post got me thinking again about the mouse vs keyboard, and the "moving around from the very home row" (in VIM) versus gesturing away with the tiny and unstable mouse cursor: Reaching for a mouse may indeed slow you down, but developers are commonly on machines where the trackpad is a micro-hand movement away. Most novice programmers can click on a character on screen faster than an expert Vimmer can type 20jFp; or LkEEE or /word or any other nasty way Vimmers have to use. The point of a mouse is to make arbitrary on screen jumps efficient, and it’s very good at doing that. Don’t you ever think you can beat a mouse. Well, although there is some bitterness in this statement, it makes a lot of sense, and EVEN MORE if you consider your direct input to be a TRACKPAD conveniently placed in front of your spacebar (which oddly is where I like to put my mouse, rotated 90° ccw, due to a serious tendonitis in my right shoulder, already healed, but you knod...). So, the question is: Has anyone replaced mouse by a standalone trackpad, to work in code editing in a desktop machine (that is, with a sandalone keyboard)? Was it worth the change?

  Read the article

• How do I 'see' an external USB drive connected directly to my Broadband Router?

  - by The Cougar Kid

  This is a very frustrating problem! I have a small home network with several dual boot Ubuntu / Windows computers. I have recently upgraded my Broadband connection and the new router permits the direct attachment of an external USB drive which can back up all of the household's computers. There are no problems when booted under Windows, and there were no problems with older versions of UBUNTU, but since upgrading to 11.10 I can no longer "see" the drive. I used to find it via Network / Windows Network / Home / name of Router, but under 11.10 the same method yields an error message Unable to mount location Failed to retrieve share list from server. Can anyone help please? Starting Nmap 5.21 ( http://nmap.org ) at 2011-12-21 10:06 GMT Stats: 0:02:02 elapsed; 0 hosts completed (1 up), 1 undergoing Service Scan Service scan Timing: About 50.00% done; ETC: 10:10 (0:01:56 remaining) Nmap scan report for 192.168.1.254 Host is up (0.0097s latency). Not shown: 998 filtered ports PORT STATE SERVICE VERSION 554/tcp open rtsp? 7070/tcp open realserver? Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 152.38 seconds sudo tail -n 30 /var/log/syslog [sudo] password for alaric: Dec 21 10:05:42 UPSTAIRS2U wpa_supplicant[882]: WPA: Group rekeying completed with 00:01:3b:8b:63:1a [GTK=TKIP]

  Read the article

• The Evolution of Computer Keyboards

  - by Jason Fitzpatrick

  While the basic shape of keyboards has remained largely unchanged over the last thirty years, the guts have undergone several transformations. Read on to explore the history of the computer keyboard. ComputerWorld delves into the history of the modern keyboard, including the heavy influence IBM’s extensive keyboard research on early keyboards: As far as direct influences on the modern computer keyboard, IBM’s Selectric typewriter was one of the biggest. IBM released the first model of its iconic electromechanical typewriter in 1961, a time when being able to type fast and accurately was a highly sought-after skill. Dag Spicer, senior curator at the Computer History Museum, notes that as the Selectric models rose to prominence, admins grew to love the feel of the keyboard because of IBM’s dogged focus on making the ergonomics comfortable. “IBM’s probably done more than anyone to find [keyboard] ergonomics that work for everyone,” Spicer says. So when the PC hit the scene a decade or two later, the Selectric was largely viewed as the baseline to design keyboards for those newfangled computers you could put in your office or home. Hit up the link below to continue reading about how the Selectric influenced keyboards throughout the 1980s and what replaced the crisp clacking of early IBM-styled models. 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >