Search Results

Search found 21884 results on 876 pages for 'external address'.

Page 70/876 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• Storing VMware virtual machines in external harddisk

  - by Jeffery Ang

  Any issue with that? I recently setup ubunutu virtual machine on my external harddisk. Once i accidentally removed the external harddisk usb connection then when i try to startup the ubuntu virtual machine again i get kernel panic. I thinking of writing a cron script to backup everyday to another location to prevent this issue

  Read the article

• OS X 10.6 Snow Leopard no longer mounting an external USB drive

  - by Brant Bobby

  I have a 1TB generic external hard drive containing a single HFS partition. I originally formatted this using Disk Utility and it worked fine. Now, for some reason, it's not auto-mounting when I start up. Using mount at the command line gives the following error: $ sudo mount /dev/disk1s2 /Volumes/Test /dev/disk1s2 on /Volumes/Test: Incorrect super block. ... but if I use the mount_hfs command it works fine, mounts, and is readable. $ mount_hfs /dev/disk1s2 /Volumes/Test/ fsck gives me an error about a bad super block: $ fsck /dev/disk1 ** /dev/rdisk1 (NO WRITE) BAD SUPER BLOCK: MAGIC NUMBER WRONG ... but fsck_hfs -fn /dev/disk1s2 doesn't find any problems and reports that the volume appears to be OK. In Disk Utility, the drive appears to have a single MS-DOS partition with a curious notice about how it appears to be partitioned for Boot Camp: I have the Boot Camp HFS driver installed in WIndows 7, and that OS sees the drive/partition normally. What's wrong with my disk?

  Read the article

• Using ASP.NET Automatically login to an external website and redirect

  - by DoodleWalker

  Hello, We have a series of products with built in web servers each of which has a login page, a customer wants to create a web portal in which they log into once, from there they can simply click on any of the devices (external websites) and it will automatically login to that site and redirect them to the page after the login screen. The portal is using ASP.NET MVC, the external devices are Windows CE based units running embedded web servers. Can find a lot on scraping, but not much on redirection after the event. Many Thanks Andy

  Read the article

• Windows 7 backup to 3TB Seagate external drive got 0x8078002A error [migrated]

  - by Zhang18

  I'm using the Windows 7 backup and restore utility to create a system image and personal file backup to an external Seagate GoFlex 3TB disk. I got the following error: One of the backup files could not be created. Details: The request could not be performed because of an I/O device error. Error code: 0x8078002A I searched all over the internet and found these two related discussions (discussion 1 and discussion 2). Note the 1st discussion is for a Western Digital drive, which seem to have a solution with the WD Quick Formatter tool. But I downloaded that software and it cannot detect my Seagate drive. The 2nd discussion is directly relevant but it does not offer a solution. I've spent days on this and am at a loss... Please help if you know what to do to make it work! Thank you!

  Read the article

• Formatted mac external hard drive loaded on pc

  - by kjokay

  I have an issue where it appears that an external hard drive which had been formatted on a mac system was loaded as a drive in Windows. Windows is obviously unable to read the data and now the drive won't mount in the mac. It appears that Windows overwrote something concerning the drive's information on what filesystems and types it has on it. Mac diskutility is unable to repair the drive and the partition is showing up in the utility as a FAT32. Using an applexsoft utility, I am able to verify the data is still on this drive, but I'd rather not spend $100 to save these files (its not my hard drive anyways). Is there a way I can use some UNIX commands to find out the partition information on the drive, back the raw data up on it, then restore the data back onto the drive after re-formatting it again?

  Read the article

• 1080p playback on external monitor

  - by xibalban

  My system (netbook) specs: 1.6 GHz dual core atom N2600 2 GB DDR3 RAM Integrated GMA3600 GPU Win 7 Professional 32 Bit Daum Pot Player V-1.5 The issue: I downloaded a 1.33 GB sized 1920 x 1080 HD documentary (file extension: mp4) and it plays without a hitch using pot player. However, when I connected an external display (an LED Full HD 24" monitor) using D-Sub, the video plays fine but the player controls become very unresponsive. For instance, it takes about 40 seconds to exit full screen while playing. I tried: Installed/updated all the latest monitor drivers Updated the VGA drivers for GMA3600 No other programs ran while the video played, with most unwanted services and background processes disabled/killed. CPU usage goes only up to 49% when the video plays Question: What may I do in order to improve the player response/video playback experience? Do I need to play with (or change) Pot Player's default video decoders, etc?

  Read the article

• Trixbox: external SIP with no sound

  - by Leandro Vidal

  I have a trixbox server and every works find except the external SIPs. Inside net all sound goes fine, but if I use a SIP phone outside the net, I can connect, I can receive calls but I there is no sound. I have this text in the sip_nat.conf: nat=yes externhost=xxxxx.dyndns.org localnet=192.168.1.0/255.255.255.0 localhost=192.168.1.210 externrefresh=10 qualify=yes And I have the ports from 5036 to 5082, 4569 and from 10000 to 20000 redirected to 192.168.1.210 on TCP and UDP. What's wrong? Thank you very much in advance

  Read the article

• Self-requests appearing on an Apache SSL site

  - by Sam Minnée

  I have an SSL site running on Apache that seems to be recieving regular self-requests of some kind. Is this something that Apache is doing? What is the reason? (ip address) - - [23/Apr/2010:14:21:00 +1200] -:443 "GET /" 400 637 "-" "-" (-) 157 (ip address) - - [23/Apr/2010:14:21:03 +1200] -:443 "GET /" 400 637 "-" "-" (-) 160 (ip address) - - [23/Apr/2010:14:21:14 +1200] -:443 "GET /" 400 637 "-" "-" (-) 147 (ip address) - - [23/Apr/2010:14:21:15 +1200] -:443 "GET /" 400 637 "-" "-" (-) 128 (ip address) - - [23/Apr/2010:14:21:16 +1200] -:443 "GET /" 400 637 "-" "-" (-) 167 (ip address) - - [23/Apr/2010:14:21:17 +1200] -:443 "GET /" 400 637 "-" "-" (-) 141 (ip address) - - [23/Apr/2010:14:21:18 +1200] -:443 "GET /" 400 637 "-" "-" (-) 166 (ip address) - - [23/Apr/2010:14:21:20 +1200] -:443 "GET /" 400 637 "-" "-" (-) 168 (ip address) - - [23/Apr/2010:14:21:21 +1200] -:443 "GET /" 400 637 "-" "-" (-) 160 (ip address) - - [23/Apr/2010:14:21:31 +1200] -:443 "GET /" 400 637 "-" "-" (-) 177 (ip address) - - [23/Apr/2010:14:21:32 +1200] -:443 "GET /" 400 637 "-" "-" (-) 103 (ip address) - - [23/Apr/2010:14:21:38 +1200] -:443 "GET /" 400 637 "-" "-" (-) 157 (ip address) - - [23/Apr/2010:14:21:39 +1200] -:443 "GET /" 400 637 "-" "-" (-) 193 (ip address) - - [23/Apr/2010:14:21:40 +1200] -:443 "GET /" 400 637 "-" "-" (-) 168

  Read the article

• Correct method to search for AD user by email address from .NET

  - by BrianLy

  I'm having some issues with code that is intended to find a user in Active Directory by searching on their email address. I have tried 2 methods but I'm sometimes finding that the FindOne() method will not return any results on some occasions. If I look up the user in the GAL in Outlook I see the SMTP email address listed. My end goal is to confirm that the user exists in AD. I only have the email address as search criteria, so no way to use first or last name. Method 1: Using mail property: DirectorySearcher search = new DirectorySearcher(entry); search.Filter = "(mail=" + email + ")"; search.PropertiesToLoad.Add("mail"); SearchResult result = search.FindOne(); Method 2: proxyAddresses property: DirectorySearcher search = new DirectorySearcher(entry); search.Filter = "(proxyAddresses=SMTP:" + email + ")"; // I've also tried with =smtp: search.PropertiesToLoad.Add("mail"); SearchResult result = search.FindOne(); I've tried changing the case of the email address input but it still does not return a result. Is there a problem here with case sensitivity? If so, what is the best way to resolve it?

  Read the article

• Locate modules by stack address

  - by PaulH

  I have a Winodws Mobile 6.1 application running on an ARMV4I processor. Given a stack address (from unwinding an exception), I like to determine what module owns that address. Using the ToolHelpAPI, I'm able to determine most modules using the following method: HANDLE snapshot = ::CreateToolhelp32Snapshot( TH32CS_SNAPMODULE | TH32CS_GETALLMODS, 0 ); if( INVALID_HANDLE_VALUE != snapshot ) { MODULEENTRY32 mod = { 0 }; mod.dwSize = sizeof( mod ); if( ::Module32First( snapshot, &mod ) ) { do { if( stack_address > (DWORD)mod.modBaseAddr && stack_address < (DWORD)( mod.modBaseAddr + mod.modBaseSize ) ) { // Found the module! // offset = stack_address - mod.modBaseAddr break; } } while( ::Module32Next( snapshot, &mod ) ); } ::CloseToolhelp32Snapshot( snapshot ); } But, I don't always seem to be able to find a module that matches an address. For example: stack address module offset 0x03f65bd8 coredll.dll + 0x0001bbd8 0x785cab1c mylib.dll + 0x0002ab1c 0x785ca9e8 mylib.dll + 0x0002a9e8 0x785ca0a0 mylib.dll + 0x0002a0a0 0x785c8144 mylib.dll + 0x00028144 0x3001d95c ??? 0x3001dd44 ??? 0x3001db90 ??? 0x03f88030 coredll.dll + 0x0003e030 0x03f8e46c coredll.dll + 0x0004446c 0x801087c4 ??? 0x801367b4 ??? 0x8010ce78 ??? 0x801086dc ??? 0x03f8e588 coredll.dll + 0x00044588 0x785a56a4 mylib.dll + 0x000056a4 0x785bdd60 mylib.dll + 0x0001dd60 0x785bbd0c mylib.dll + 0x0001bd0c 0x785bdb38 mylib.dll + 0x0001db38 0x3001db20 ??? 0x3001dc40 ??? 0x3001a8a4 ??? 0x3001a79c ??? 0x03f67348 coredll.dll + 0x0001d348 Where do I find those stack addresses that are missing? Any suggestions? Thanks, PaulH

  Read the article

• external SCSI tape drive DAT 72 problem Solaris 10

  - by Hassan

  Hi all, I have solaris 10 sparc running and working very well but i have problem with external SCSI tape drive DAT 72 problem it seems to me the tape drive is manufactured by SUN microsystems when i ran mt -f /dev/rmt/0 status it reveals the following output bash-3.00# mt -f /dev/rmt/0 status /dev/rmt/0: No such file or directory when i ran ls -l it reveals the following output ls -l /dev/rmt/0 lrwxrwxrwx 1 root root 43 Sep 20 2006 /dev/rmt/0 -> ../../devices/pci@8,600000/scsi@1,1/st@3,0: it seems to me everything is okay SCSI cable is connected properly to Tape device and to server as well the tape has SCSI termination dongle as well and connected properly to Tape device as well any ideas would be a great assist Thanks in advance

  Read the article

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to be able to forward all the traffic to one of these local address trhough the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 are not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

• Import LDIF file to external server

  - by colemanm

  As a follow-up to my previous question, which I've resolved part of, what we're trying to do now is take an exported .ldif file of the "Users" container on our OS X Server and import it into a separate OpenLDAP server on an EC2 instance. This we'll use for LDAP user authentication of other apps without having to open our internal network to LDAP traffic. The exported .ldif file thinks the DN of the "Users" container is cn=users,dc=server,dc=domain,dc=com. Is it easiest to configure the EC2 OpenLDAP server to think that it's domain is the same so the container is imported to the proper place? Or should we edit the text of the .ldif file to change the DN to match the external naming? Hopefully that makes sense... but I'm confused as to the best way to accomplish this.

  Read the article

• Can't delete a directory on external drive (OS X)

  - by Martin Tóth

  I have a brand new Transcend StoreJet 25M3 (external HDD) mounted to MacBook (Leopard 10.5.8) at /Volumes/Transcend. I copied some data from my old Windows (XP) machine on it, and now, after cleaning some stuff up, I wanted to delete some directories, but this is what happened: $ rmdir My\ Pictures/ rmdir: My Pictures/: Operation not permitted Using Finder just asks for password, but does not delete the directory (sound of "moved to Trash" is played). I thought it's some permission "thing", but: $ ls -l drwxrwxrwx 1 martin staff 32768 5 jan 16:11 My Pictures/ $ sudo rm -rf My\ Pictures rm: My Pictures: Operation not permitted I re-mounted, rebooted (thinking that there's some file lock), but that did not help. What might have happened here? How to delete it?

  Read the article

• Sharing an external hard drive in Ubuntu using Samba

  - by cambraca

  /media/MYDISK is where my hard drive is mounted automatically. I created a symlink using: ln -s /media/MYDISK /home/camilo/MYDISK chmod 777 /home/camilo/MYDISK I'm setting up smb.conf like this: [myshare1] comment = external disk browsable = yes path = /home/camilo/MYDISK guest ok = yes read only = no create mask = 0775 Also, in the [global] section I tried adding the following lines: follow symlinks = yes wide links = yes unix extensions = no The problem is that when browsing the shared folder in Windows 7, I get a "\\etc\myshare1 is not accessible" error. When pointing the path to a regular folder it works fine. Also, when I point it directly to /media/MYDISK, it shows the same error. EDIT: to make it more interesting, I have no graphical interface, so I need to touch the config files directly..

  Read the article

• [Python] - Getting data from external program

  - by Kenny M.

  Hey, I need a method to get the data from an external editor. def _get_content(): from subprocess import call file = open(file, "w").write(some_name) call(editor + " " + file, shell=True) file.close() file = open(file) x = file.readlines() [snip] I personally think this is a very ugly way. You see I need to interact with an external editor and get the data. Do you know any better approaches/have better ideas?

  Read the article

• External hard drive not disconnecting and leaving 'ghost drives' on my PC

  - by Shane

  I use a Seagate FreeAgent on my laptop and PC. While it works fine most of the time, sometimes when I try to safely disconnect it, it says the files are in use. Obviously I have by that time shut down all applications. Now with my laptop, a Toshiba Satellite, I shut down the computer and unplug the Seagate and no ghost drives are found. But no matter what I do with my desktop, it continues to create 'ghost drives'. Is this due to a feature in the external hard drive, and if so, would anyone have an idea how I can fix it? I am getting tired of deleting the 'ghost drives'. Both my laptop and desktop use Windows 7.

  Read the article

• Sharing an external hard drive in Ubuntu using Samba

  - by cambraca

  /media/MYDISK is where my hard drive is mounted automatically. I created a symlink using: ln -s /media/MYDISK /home/camilo/MYDISK chmod 777 /home/camilo/MYDISK I'm setting up smb.conf like this: [myshare1] comment = external disk browsable = yes path = /home/camilo/MYDISK guest ok = yes read only = no create mask = 0775 Also, in the [global] section I tried adding the following lines: follow symlinks = yes wide links = yes unix extensions = no The problem is that when browsing the shared folder in Windows 7, I get a "\\etc\myshare1 is not accessible" error. When pointing the path to a regular folder it works fine. Also, when I point it directly to /media/MYDISK, it shows the same error. EDIT: to make it more interesting, I have no graphical interface, so I need to touch the config files directly..

  Read the article

• cant send using postfix from external ip address

  - by daniel

  i have postfix set up as a satellite to listen on port 587 i can send email outside fine trough the postfix(ubuntu) box from the local network with no problems when i try to connect to the postfix(ubuntu) box from a external ip and send mail it spits back a 554 5.7.1 Relay access denied error i can telnet to it fine, just cant send mail this is my main.cf : smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = smtp_use_tls = no myhostname = cotiso-desktop alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = mydomainname.com, cotiso-desktop, localhost.localdomain, localhost relayhost = smtp.mydomainname.com mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all there is no security set up yet, i'm just trying to get it working first any ideas? thanks in advance

  Read the article

• Booting Linux from External HDD, with persistence

  - by Moriarty

  I am trying to install Linux, specifically Lubuntu or BackTrack 5 on an external HDD (Seagate FreeAgent GoFlex) but I have had no luck using YUMI, or Untebootin to get it working. I want the hard drive to be able to save the data within Linux (As in, If I install a program, it will stay there). I also tried doing this with a flash drive, which does boot, but it does not save data (I tried following Pendrive's tutorial on creating a casper-rw file and adding "persistent" to various files, but I cannot get it to save files. Basically, I just want a form of linux on a portable device that will save files and settings between boots Note: I do not have a CD to install from. Any help would be greatly appreciated, Thanks!

  Read the article

• Howto find internal IP server by external IP

  - by HWTech

  I've got 12 servers in datacenter, but can login by SSH into one of them (facade server), other servers available only from it. In hosts file we have ip list each of available servers. milkov@devel:/var/www/davel$ cat /etc/hosts 192.168.1.4 data1 192.168.1.7 data2 192.168.1.5 bground1 192.168.1.6 bground2 192.168.1.10 frontend1 192.168.1.11 frontend2 ... Also I've domain megaplan.tvigle.ru (IP 79.142.100.36). Question: How to know which one of servers serve this domain? How to find servers internal ip-address by external IP. PS: Sorry about my Eng. lng

  Read the article

• IIS Redirect a sub directory to an external URL

  - by Will Hancock

  Hi forgive my ignorance for I am a humble client side developer... I am a webapp made up of static HTML and JS. But I want to call an external service via AJAX, this causes some issues with CORS or Cross Domain policy on the browser. So I need to make a request to MY server http://dev.webapp.com/service So I want to redirect the /service on the server to http://externaldata.com/service And return the result. The Mac boys have acheived this in Apache with a proxy pass: ProxyPass /service http://externaldata.com/service Can anybody help with how to do this in IIS? I have found articles about ARRs and Reverse Proxy, terms that are alien and seem too complicated. As a humble webdev can I do this using IIS GUI?

  Read the article

• Do 10m external SAS cables work?

  - by Joachim Sauer

  According to the Wikipedia page external SAS cables are specified for up to 10m length. However, I found it pretty hard to actually find places that sell cables of that length. This made me wonder: Are there any known problems with using cables that are as long as this? Will it be more fragile? Slower? And if 10m is not suggested, would 6m be any more stable? A little background: for several reasons we'd like to put a tape library physically separate from our main server and 10m would be enough to put it on a separate floor.

  Read the article

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• RHEL kickstart with external DVDrom drive

  - by AndyM

  HI I've an old Dell poweredge server with an CDROM drive. I've attached a USB DVDROM and USB stick with my ks.cfg on so I can install RHEL from DVD not loads of CDs :-) I can boot from the RHEL media in DVDROM and point the installer to the USB ks.cfg. This works but the ks.cfg script has the cdrom keyword in it. The install then stops and asks for the RHEL media to be in the CDROM drive not the DVDROM. How can I change the ks.cfg so it uses the external DVDROM for the install media not servers builtin cdrom drive ? I know I can go and rebuild my DVD image to include the ks.cfg , but this is an extra step I dont want to do if I have to. Regards Andy

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >