Search Results

Search found 10050 results on 402 pages for 'graphics card'.

Page 70/402 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

  • ATI Radeon HD 5970 Display numbering issues

    - by Arindam Sen
    I have 2 computers on which i have ATI Radeon HD 5970 graphics card installed. There is 1 VGA out and 1 DVI out in it. When I connect my VGA out to a monitor on my 1st computer, it shows it as display 1 and when I connect my DVI out to a monitor it show it as display 2 (I am using extended display). When I do the same thing on my 2nd computer it shows just the opposite. The VGA out shows as display 2 and the DVI out shows as display 1. Is it a problem with the drivers or the hardware? (because the graphics card on both is exactly the same)

    Read the article

  • Is it possible to add hardware on a remote machine and use it as if it was installed on the local machine?

    - by that0th3rGuy
    Probably a silly question. We have two computers in the apartment running Windows 7 and Windows Vista. 99% of the time we use headphones but every now and then we have a desire for some ambiance so we got a set of 2.1 speakers. But now only one of us has access to the speakers unless we move them around every now and then. So I was wondering if it's possible to add the other computer's sound card as a hardware device on my computer so that I can configure, for instance, Winamp to play through the other computer's sound card, hence the speakers connected to the other computer.

    Read the article

  • BSOD when playing Portal 2 using ATI Radeon 4800 on H61M/U3S3 mobo

    - by Ben Walker
    playing Portal 2 will always give me blue screen of death, usually after about 10 minutes of playing. BSOD references atikmpag.sys. I have tried several updates for graphics driver and through ATI Catalyst Center. I have updated the motherboard BIOS. My RAM is OK. Nothing changes. I had previously run the game fine, then I removed my video card to use on-board graphics once, and after re-installing the video card, I get this problem every time. I am using: ATI Radeon 4800 ASRockH61M/U3S3 motherboard Windows 7 64-bit

    Read the article

  • ATI Radeon HD 5770 Cooling

    - by Murtez
    I have a Radeon HD 5770 manufactured by ATI. In the course of using compressed air to clean it the fan shattered. I put a case fan on the card to cool it, but it's not doing a great job; the temperature goes to nearly 100 sometimes. The card is not overclocked or anything, the PC itself is clean. I looked around for a third party cooling system but the only one I found was the Accelero L2 Pro. It's low on stock and I don't know how great it will be, some review say it may not fit on all 5770 cards. Does anyone know of another one that will work? Help is much appreciated.

    Read the article

  • Changing ati graphics setting into a batch file

    - by FrozenKing
    I want to change my saturation level to zero and again to default but I can do it manually by going to ati catalyst center. Since, I want to do it regularly I need some batch file code or program to alter this settings in a click or using shortcut keys. The reason I am doing this because I want to change my screen to black and white from color since b/w will make my eyes less tired then a colored display. I came to know about this saturation from my previously asked question : Changing display color from B/W to color (vice-versa)using a program.

    Read the article

  • Dell Latitude E6420 dual-boot Ubuntu + Windows 7 Optimus graphics problems

    - by Ryan
    I have a Dell Latitude E6420 laptop with Ubuntu 12.04 alongside Windows 7 (dual-boot) docked in a docking station with 2 DVI outputs. It took me a week of tinkering to get the dual external monitors to work in Ubuntu, and I had to disabled the "Optimus" feature in the BIOS. But now neither external monitor is detected in Windows, and the resolution is also very low. Do you know how I can successfully dual-boot Windows 7 and Ubuntu on this machine using my 2 external DVI monitors? I have an open question here too, trying to resolve this same issue: http://askubuntu.com/questions/146933/dock-with-dual-external-dvi-monitors-with-intel-nvidia-optimus

    Read the article

  • DVI to VGA adapter only working in one output

    - by Tom Jenkinson
    I have a AMD Radeon HD 6800 Series graphics card which has 2 DVI outputs. I tried to set it up with 2 monitors which both have vga connectors on the end and used 2 dvi to vga adapters like these. http://www.tvcables.co.uk/images/items/vga-to-dvi.jpg For some reason nothing would reach the monitor, it would remain in standby, if it was plugged into the second output. I tried all the different combinations of cables, adapters and the 2 monitors but whichever monitor that was plugged into the second output wouldn't work. I then randomly decided to plug a different monitor into the second output which has a dvi connector on the end so there was no need for an adapter and plugged it in and it worked! Does anyone know why the second output on the graphics card won't work with a dvi to vga adapter (and the first output will)? I'm really confused! Thanks

    Read the article

  • Mini DV and DVI Conversion

    - by Kairan
    Video card is: AMD HD 6950 My video card comes with 1xHDMI, 2xDVI, and 2xMini DV ports. I have always used VGA and DVI only. I have the HDMI already connected. I want to hook up 2 more display. One of the display can take a VGA only, the other is an LCD TV so it has VGA, HDMI, Component. I am wondering: 1) What is the best output port to use for the second two monitors? The miniDV or the DVI? 2) I need to run a long cable maybe 15-25 feet, this might change the answer to question 1, is an HDMI long cable 20+ ft going to be better than a 20ft DVI or miniDV ?

    Read the article

  • How can I configure the embedded wireless card in a Toshiba Satellite Pro 4600 to work under Lubuntu 10.10?

    - by MoLE
    I'm struggling to get the embedded wireless card in this laptop to work. In 7.10 (gutsy) it worked fine. Now I'm trying to get 10.10 (maverick) working on it, and am using the Lubuntu flavour due to the low resources of this laptop. The hardware: Appears to be an embedded pcmcia card. pccardctl ident gives: Socket 0: product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) The default kernel recognises the card and loads the orinoco_cs driver. orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0001:0006:000e orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.14 Then for some reason, the driver isn't happy with this and gives: orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0002:0009:0030 orinoco_cs 0.0: Firmware determined as Lucent/Agere 9.48 All seems ok until I try to associate with my access point using Network Manager. eth1: Lucent/Agere firmware doesn't support manual roaming repeated about 10 times then NM gives up. According to the linuxwireless.org wiki page on this driver, this is a known issue, and I quote: Known issues Roaming and WPA_supplicant Lucent/Agere firmware doesn't support manual roaming On the Agere cards, roaming is controlled by the firmware instead of userspace. You will get the above message if userspace attempts to associate with a specific AP rather than by SSID. If you are using wpa_supplicant use ap_scan=2 mode. NetworkManager uses wpa_supplicant, so the above also applies. At this point my google-fu has failed me, and I can't find how to configure network manager to use the mystical "ap_scan=2" mode via wpa_supplicant. I have tried the following suggested solutions (from launchpad or the forums) deleting the agere* files from /lib/firmware using wicd instead of network manager combining both blacklisting the orinoco_cs driver in an attempt to force use of the hostap_cs driver instead (in case it is a prism2 card). Obviously none of them have worked for me. Any hints on how to perform the suggested workaround above? Edit: I have also confirmed working on 8.10 (intrepid) live CD.

    Read the article

  • Multiple EyeFinity Display groups

    - by Shinrai
    Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

    Read the article

  • System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

    - by MGOwen
    Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

    Read the article

  • Second Monitor "Input Not Supported"

    - by Drew
    I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

    Read the article

  • Is PCI Express x4 faster or slower than a standard PCI slot for graphic cards?

    - by Stephen R
    I am looking at potential motherboards for a computer I want to build and ran into this conundrum. The motherboard has two PCI Express slots that allow for 16 channel cards to fit in them. The catch is only one of them operates at 16 channels, the other operates only 4 channels. My question is, would it be faster to buy a PCI Express graphic card and install it in the 4 channel PCI Express slot? Or would it be better to buy a standard PCI graphic card and install it in one of the available PCI slots?

    Read the article

  • The sound freezes while listening to music

    - by Scott
    I have bought an sound card - Sound Blaster X-FI Surround 5.1 PRO and while I'm listening to the music, after few minutes or even hours (it does happends randomly) the sound dissapears and I have to go settings: Playing Devices - Advanced and switch the Default Format (sampling frequency) and switch from the `16-bits, 48000 Hz (DVD Quality) to any other from the list (16-bits, 96000 Hz or 24-bits, 48000 Hz or 24-bits 96000 Hz). I have been trying to set all of the above options, but for all of them the sound freezes after listening to music. It is getting annoying and I hope its the settings fault and not my sound card. I got my drivers installed from the attached CD and I'm running Windows 7 HP 64 bits. If anyone would try to help me, I would really appreciate this.

    Read the article

  • Full computer freeze with audio stuttering after playing games for a period of time

    - by Wes
    I've been having a problem with my computer freezing completely when playing games like LA Noire or SW:TOR (yay early access!). Basically, what happens is I will play for around an hour or so (depending on the game) and when the freeze happens, the entire computer locks up and any audio that was being played glitches out and stutters broken-record style (only much shorter. Very techno). I think it might be heat related and thought it might be my video card overheating, so I have been setting my video card (Nvidia Geforce 260GTX 216-core) fan to highest setting, but that has little to no effect. Now I'm beginning to think it's either my FSB or CPU overheating. Can anyone provide some insight or similar experiences? I'm really at a loss and don't wanna damage my rig beyond repair.

    Read the article

  • Building my own computer

    - by There is nothing we can do
    I'm planning to build my own computer. I do not have enough cash to buy all components I need in one go. I want to ask, if I buy motherboard which is compatible with i7 processor (any) and compatible with graphic card Nvidia gtx 780, does it mean that this mother board will be compatible with processors (from intel) which will be released next year? Same for graphic cards? The point is that I'd like to avoid situation where I buy motherboard let's say now, and in couple of months there will be new graphic card/processor which will not be compatible with my mother board? Or maybe shall I start completely somewhere else?

    Read the article

  • Multi-monitor resolution and position settings lost after reboot

    - by SoftDeveloper
    I've had two 1280x1024 monitors running for years on an nVidia 8800GT card with no problems. I've now replaced one monitor with a new 2560x1440 one. The card seems to support both fine, however every time I reboot the resolutions and monitor positions revert to the old settings. I've tried upgrading, downgrading, stripping out and reinstalling many versions of the nvidia drivers to no avail. Logging in as another user doesn't help - same problem. Booting into another another OS (Win7 64) works OK, so it is just this OS installation. During boot up everything looks fine (ie native 2450x1440 res) until the nVidia control panel or something is loaded which flips it back into the old mode. I have no old saved nvidia profiles. I can't find anything in the registry relating to these old settings. Its driving me crazy having to set resolutions and realign monitors on every reboot! Can anybody help?

    Read the article

  • Is GPU active when there are not any monitors?

    - by Mixer
    Does GPU render anything when there is no monitor plugged in? Today I turned my old PC into some kind of a "server" which means that I want it running 24/7. I don't need any display (I will operate through ssh) so when everything was set up I removed my monitor. After a hour I checked my graphic card's cooling system and it was still hot. My graphic card is GeForce 8600 (with DVI connector), OS is Debian Linux. What is the best solution in this situation (standalone server) if GPU is active and I don't want it to waste power?

    Read the article

  • VGA passthrough and desktop virtualization

    - by Zacariaz
    In short, my dream is to have one machine with multiple paravirtualized desktop and server guests, one of which has to be a Windows desktop with powerful graphics. As Windows can't be paravirtualized in the normal sense of the word, I was quite happy when I heard about VGA passthrough, but then I read on. As I understand it, such a setup would mean that the Graphics will be dedicated to one particular guest, thus you wouldn't be able to switch between guests. If this is in fact so, would someone please explain to me what the purpose/use of VGA passthrough is? I can think of no real use for it. Yes it's a cool technology, but to me it seems pointless. It's true that it's possible to passthrough individual VMs to separate GPUs, which is also cool, but in the end I should think that two seperate computers would make life a whole lot simpler. Again it seems rather pointless.

    Read the article

  • Asus x551c windows 7 Intel HD Graphics driver

    - by user3609459
    I did install Windows 7 64 bit on my ex. Windows 8 pro Asus x551c "Ultrabook". The CD with the drivers isn't useable since its a windows 8 only DVD-Rom. I got the Wi-Fi and other stuff running and already tryed 3 of the Intel-HD Graphic drivers for win7 64Bit i found with google. No one was compatible with my pc. Any suggestions how to get this running? I hate windows 8 and dont want to get forced to use it.

    Read the article

  • Multiple EyeFinity Display groups

    - by Shinrai
    Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

    Read the article

  • Missing Driver - Video Controller (VGA Compatible)

    - by arahant
    I have a HP 2000-2106TU Notebook PC running Windows XP. I want to get the brightness keys to work. They are placed over the F2 and F3 buttons and are meant to be used in conjunction with the Fn key. But these combinations do not work, though other Fn keys such as the volume control keys do. I see a missing driver for a device called Video Controller (VGA Compatible) in the Windows Device Manager. The hardware id is PCI VEN 8086 DEV 0106 SUBSYS_1858103C which a Google search suggests is in an Intel HD Graphics family, but I don't know where to locate the driver. HP's driver scan does not help, as it does not show any missing driver related to video/graphics. What can I do next?

    Read the article

  • ATI HD 5970 display

    - by user55406
    Hello everyone i'm a little worry about my graphic card. before I get into that I will tell you my system specs. I have intel dx58so mainboard, 6gb corsair xms ddr3 ram, intel i7 960 cpu, and ati hd 5970. I'm also using a coolmaster haf92 case. My OS is vista X64. Here is my issue when I type in dxdiag in (Start Search) and I look into display. I see in (approx total memory) 716mb graphic memory. The ati hd 5970 is a 2gb graphic card. Am I being stuipd or is there an issue.

    Read the article

  • Like to Upgrade My PC (7 year old) - for animation and hardcore gaming ! - help me [closed]

    - by sri
    I like to buy a new computer for my studies and as well as gaming. My old pc has 1.5 GB RAM with 512MB Graphics card. And it is very old to run Adobe CS5 version and other high end animation software. My budget will be INR 20k-25k. I have 500GB hard disk, keyboard and mouse new. So apart from this, I like to buy : Intel or AMD is good ? My idea is : Corei5 or Corei7 = which is best and economy ? Which mother board. 4 GB RAM with upto 8 GB RAM slot for future upgrade. 1 GB or 2 GB Graphic card - which one ? If I am wrong - please suggest me

    Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >