high density - Page 70 - Developer IT

aplay -l says no soundcards found; alsaconf says no supported cords; yet /proc/asound contains cards

- by nimasmi

I am trying to get HDMI output using a Gainward Nvidia 210 512 MB on Ubuntu 10.04 Lucid Lynx. I have upgraded alsa-driver, alsa-lib and alsa-utils to 1.0.24 by building from source, thanks to this blog post. Some relevant output... user@box:~$ lspci | grep Audio 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 01:09.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 01:09.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 01:09.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) user@box:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. Compiled on Sep 15 2012 for kernel 2.6.32-42-generic (SMP). user@box:~$ ls /proc/asound` card0 cards hwdep NVidia oss seq version card1 devices modules NVidia_1 pcm timers user@box:~$ aplay -l aplay: device_list:240: no soundcards found... user@box:~$ sudo /sbin/alsa-utils start * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1403: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... amixer: Invalid command! ...done. Any help appreciated. PS my video card is connected only through the PCI-E slot. I assume there is no extra audio connection required.

Read the article

Is there a product planning tool that has these specific features? [closed]

- by acjohnson55

I am working on a web startup in the early stages, and we are struggling a bit to manage the scope and scheduling of our product. We have loads of high-level features in the pipeline, but we need a good way of scheduling them for release iterations and breaking them into actual tasks that can be scheduled (that could be a separate tool, but integration would be preferred). I would say that our product can be pretty cleanly divided into "aspects", and we want to be able to separate features by the aspect to which they apply. Perhaps most importantly, it should be really simple to create and move features between target release points. We don't have physical space for a war room type setup, so whatever we settle upon should ideally have a cloud-type web interface. Right now, we're using Excel to make a grid of product aspects vs. target releases, and we store features at the intersections. But this is not providing a good way of indexing tasks to those features or being able to move them around. I would much rather have something that automates the grid overview. I'm less interested in something that helps with low-level scheduling than I am in something that is good at organizing the product plan at the long-term, high-level view. Is there a product planning tool out there that matches these specifications?

Read the article

Recommended formats to store bitmaps in memory?

- by Geotarget

I'm working with general purpose image rendering, and high-performance image processing, and so I need to know how to store bitmaps in-memory. (24bpp/32bpp, compressed/raw, etc) I'm not working with 3D graphics or DirectX / OpenGL rendering and so I don't need to use graphics card compatible bitmap formats. My questions: What is the "usual" or "normal" way to store bitmaps in memory? (in C++ engines/projects?) How to store bitmaps for high-performance algorithms, such that read/write times are the fastest? (fixed array? with/without padding? 24-bpp or 32-bpp?) How to store bitmaps for applications handling a lot of bitmap data, to minimize memory usage? (JPEG? or a faster [de]compression algorithm?) Some possible methods: Use a fixed packed 24-bpp or 32-bpp int[] array and simply access pixels using pointer access, all pixels are allocated in one continuous memory chunk (could be 1-10 MB) Use a form of "sparse" data storage so each line of the bitmap is allocated separately, reusing more memory and requiring smaller contiguous memory segments Store bitmaps in its compressed form (PNG, JPG, GIF, etc) and unpack only when its needed, reducing the amount of memory used. Delete the unpacked data if its not used for 10 secs.

Read the article

Support our movement?

- by Mirchi Sid

| Imagine Freedom 2013 | mnearth Student Programs This is to inform you about the world’s first online student competition called imagine freedom which is conducted by mnearth corporation India .The imagine freedom will be one of the most popular student IT competition in the world .The program will be fully functioned with free and open source software and operating system like Ubuntu Linux and Linux . The Competition have a lot of other categories like web designing , software development and much more .The program coordinates will contact your schools for the selection process and giving the first steps for registration . If you are an expert in Open source free software? Then it is the time for you ! Otherwise do you know anyone who have the skills ? Then inform them about the program . The competitions will be done as a part of Mnearth Student Programs . The program schedule and the local competition information will be send after getting the applications . The competitions are categorized into three . |Categories Of Participants Animation Films Multimedia Presentation 3D Animation Web Designing Software Development Innovations Cloud Apps Games etc. . . . . . |Levels Of Participants High School Level Higher Secondary Level Collage Level University Level |High School level This levels is for the students who is students . It’s age limit is 12 - 24 years . The competitions will be started on this year for selecting the good students who have the talent . For more information Send to : [email protected] Call us on :04936312206 (india) Join with the Community on facebook : follow us on twitter : www.twitter.com/imaginatingkids www.facebook.com/imaginefreedomonce

Read the article

Is The Ease Of Windows Phone Development Ruining Its Image

- by Tim Murphy

I was reading an article on Mashable recently by a long time iPhone user who is living solely on a Lumia 920 at the moment and giving her assessment. One thing that struck a nerve with me was her describing the Windows Phone ecosystem as immature. She wasn’t saying this because of the number of apps or the big names like most people do. She means the quality of the apps in the store. This hit a nerve with me. I find it hard to believe that the majority of app on iOS are of any higher quality than any other platform. I believe in any ecosystem you are going to find some high end, high quality apps, but the majority by default will be from people who are trying to solve a problem but do not have the resources to have top graphics and full blown testing. There will also be a large number that are just there trying to trick you into giving up some cash. Does any of the mean that we shouldn’t take notice of this complaint? Of course not! We should always strive to publish the best quality apps possible. Don’t do things like leaving default app icons and backgrounds. Put a little effort into your design. You should also spend as much time as possible ensuring against crashes and giving the user the best experience possible. Think through your apps organization and navigation. Go the extra step of putting it into beta and letting select people use it and give you feedback before going to full release. Remember, if we want people to appreciate the Windows Phone platform we have to make sure we give them apps that they are going to enjoy using. del.icio.us Tags: Windows Phone,iPhone,iOS,Nokia,Lumia 920,Mashable

Read the article

Build vs Buy Webcast: November 8, 2012

- by TammyBednar

Date: Thursday, November 8, 2012, 1:00 PM EST You have a choice. Do you build your own database platform or buy a pre-engineered database appliance? Building a high-availability database platform presents unique challenges. Combining servers, storage, networking, OS, firmware, and database is complicated and raises important concerns: Will coordination between multiple SME’s delay deployment? Will it be reliable? Will it scale? Will routine maintenance consume precious IT-staff time? Ultimately, will it work? Enter the Oracle Database Appliance, a complete package of software, server, storage, and networking that’s engineered for simplicity. It saves time and money by simplifying deployment, maintenance, and support of database workloads. Plus, it’s based on Intel Xeon processors to ensure a high level of performance and scalability. Attend this Webcast to hear customer stories and discover how the Oracle Database Appliance: Increases ROI by reducing capital and operational expenses Frees IT staff by reducing deployment and management time from weeks to hours Takes the worry out of supporting mission critical application workloads Register For this WebCast today!

Read the article

Sound not working with Ubuntu 12.10 clean install

- by ZooRocket

Did a clean install of Ubuntu 12.10 from 12.04 and the sound is not working now. In 12.04 it worked out of the box. I ran hwinfo --sound > hal.1: read hal dataprocess 4222: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 10: PCI 1b.0: 0403 Audio device [Created at pci.318] Unique ID: u1Nb.ekgK5auW5RA SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801G (ICH7 Family) High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "82801G (ICH7 Family) High Definition Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01de Revision: 0x01 Memory Range: 0xfdffc000-0xfdffffff (rw,non-prefetchable) IRQ: 11 (no events) Module Alias: "pci:v00008086d000027D8sv00001028sd000001DEbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Not sure how to proceed to fix this. Has also worked prior to this version.

Read the article

What makes you look like a bad developer (ie a hacker) [on hold]

- by user134583

This comes from a lot of people about me, so I have to look at myself. So I would wonder what make one a bad developer (ie a hacker). These are a few things about me I used IDE intensively, all features, you name it: auto-completion, refactoring, quick fixes, open type, view hierarchy, API documentation, etcc When I deal with writing code for a project in domain I am not used to (I can't have fluency in this, this is new), I only have a very rough high level ideas. I don't use the standard modeling diagrams for early detail planning. Unorthodox diagrams that I invented when I need to draw the design in details. I don't use UML or similar, I find them not enough. I divide the sorts of diagram I drew into 3 types. Very high level diagrams which probably can be understood by almost anybody. Data entity diagram used for modeling data objects only (like ER diagrams and tree for inheritances and composition). Action diagrams for agents/classes and their interactions on data objects they contain. Constantly changing the interface (public methods) between interacting agents/classes if the need arises. I am more refrained when the interface and the module have matured Write initial concept code in a quick hackie way just so that the module works in the general cases so that I can play around with it. The module will be re-factored intensively after playing around so I could see more corner cases that I couldn't or (wouldn't want) anticipate before writing code. Using JUnit for integration-like test by using TestSuite class and ordering Unit test classes in the suite Using debugger almost anytime there is a problem instead of reading the code Constantly search on the internet for how to do some thing with some library that I haven't used a lot. So judgment, am I a bad developer? a hacker? Put in other words, to make sure this is not considered off-topic: - Is this bad practice to make your code too agile during incubating/prototyping phase of software development - Is it bad practice to use JUnit for integration testing, (I know there are other framework for integration testing, but those frameworks are for a specific products, not general)

Read the article

Partner Showcase

- by rituchhibber

Building a High Performance Employee Self Service Portal with Oracle WebCenter Free Half Day Technical Workshop Organisations started with static corporate intranets at the beginning of the “Noughties”, these have been evolving to the Intranet Portal that is common today. The rise in Employee Self Service leverages off this evolution to transform the intranet as a resource in order to deliver the “Contextual workers control panel”. This empowers employees to do their complete job from a single environment covering transactions, document handling, form completion, watching presentations, participating in discussions through to utilising search functionality. Ether Solutions - the Enterprise Portal specialists, together with C2B2 - the independent middleware experts, will deliver this workshop to you, allowing you to discover how Oracle WebCenter provides a high performance, highly scalable platform for social intranets and EmployeeSelf Service Portals. To register, please click here. When? Wednesday, 12th of December 2012 Where? Institute of Directors, 116 Pall Mall, London SW1Y 5ED Who should attend? Lead Developers, Technical Architects, Solution Architects, Technical Leads and other Technical team member interested in learning about WebCenter. Lingotek - Collaborative Translation Technology Lingotek is the leading provider of Collaborative Translation Technology designed to meet the requirements of organizations challenged with communicating, interacting, and commercializing a global audience. Lingotek software helps companies achieve unprecedented control over the translation process and enables companies to capture, grow, and reuse their linguistic assets. Lingotek has deployed systems for some of the most innovative organizations in the United States and has enabled the success of large Fortune 500 corporations, small professional firms, and companies of every size in between. For further information, please click here.

Read the article

??11.2 RAC??OCR?Votedisk??ASM Diskgroup?????

- by Liu Maclean(???)

????????Oracle Allstarts??????????ocr?votedisk?ASM diskgroup??11gR2 RAC cluster?????????,????«?11gR2 RAC???ASM DISK Path????»??????,??????CRS??????11.2??ASM???????, ????????????”crsctl start crs -excl -nocrs “; ?????????,??ASM????ocr?????votedisk?????,??11.2????ocr?votedisk???ASM?,?ASM???????ocr?votedisk,?????ocr?votedisk????????cluter??????;???????????CRS????,?????diskgroup??????????,?????????????????? ??:?????????????????ASM LUN DISK,???OCR?????,????????4??????????,???????$GI_HOME,?????????;????votedisk?? ????: ??dd????ocr?votedisk??diskgroup header,??diskgroup corruption: 1. ??votedisk? ocr?? [root@vrh1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE a853d6204bbc4feabfd8c73d4c3b3001 (/dev/asm-diskh) [SYSTEMDG] 2. ONLINE a5b37704c3574f0fbf21d1d9f58c4a6b (/dev/asm-diskg) [SYSTEMDG] 3. ONLINE 36e5c51ff0294fc3bf2a042266650331 (/dev/asm-diski) [SYSTEMDG] 4. ONLINE af337d1512824fe4bf6ad45283517aaa (/dev/asm-diskj) [SYSTEMDG] 5. ONLINE 3c4a349e2e304ff6bf64b2b1c9d9cf5d (/dev/asm-diskk) [SYSTEMDG] Located 5 voting disk(s). su - grid [grid@vrh1 ~]$ ocrconfig -showbackup PROT-26: Oracle Cluster Registry backup locations were retrieved from a local copy vrh1 2012/08/09 01:59:56 /g01/11.2.0/maclean/grid/cdata/vrh-cluster/backup00.ocr vrh1 2012/08/08 21:59:56 /g01/11.2.0/maclean/grid/cdata/vrh-cluster/backup01.ocr vrh1 2012/08/08 17:59:55 /g01/11.2.0/maclean/grid/cdata/vrh-cluster/backup02.ocr vrh1 2012/08/08 05:59:54 /g01/11.2.0/grid/cdata/vrh-cluster/day.ocr vrh1 2012/08/08 05:59:54 /g01/11.2.0/grid/cdata/vrh-cluster/week.ocr PROT-25: Manual backups for the Oracle Cluster Registry are not available 2. ??????????clusterware ,OHASD crsctl stop has -f 3. GetAsmDH.sh ==> GetAsmDH.sh?ASM disk header????? ????????,????????asm header [grid@vrh1 ~]$ ./GetAsmDH.sh ############################################ 1) Collecting Information About the Disks: ############################################ SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 9 03:28:13 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. SQL> Connected. SQL> SQL> SQL> SQL> SQL> SQL> SQL> 1 0 /dev/asm-diske 1 1 /dev/asm-diskd 2 0 /dev/asm-diskb 2 1 /dev/asm-diskc 2 2 /dev/asm-diskf 3 0 /dev/asm-diskh 3 1 /dev/asm-diskg 3 2 /dev/asm-diski 3 3 /dev/asm-diskj 3 4 /dev/asm-diskk SQL> SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options -rw-r--r-- 1 grid oinstall 1048 Aug 9 03:28 /tmp/HC/asmdisks.lst ############################################ 2) Generating asm_diskh.sh script. ############################################ -rwx------ 1 grid oinstall 666 Aug 9 03:28 /tmp/HC/asm_diskh.sh ############################################ 3) Executing asm_diskh.sh script to generate dd dumps. ############################################ -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_1_0.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_1_1.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_2_0.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_2_1.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_2_2.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_0.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_1.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_2.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_3.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_4.dd ############################################ 4) Compressing dd dumps in the next format: (asm_dd_header_all_.tar) ############################################ /tmp/HC/dsk_1_0.dd /tmp/HC/dsk_1_1.dd /tmp/HC/dsk_2_0.dd /tmp/HC/dsk_2_1.dd /tmp/HC/dsk_2_2.dd /tmp/HC/dsk_3_0.dd /tmp/HC/dsk_3_1.dd /tmp/HC/dsk_3_2.dd /tmp/HC/dsk_3_3.dd /tmp/HC/dsk_3_4.dd ./GetAsmDH.sh: line 81: compress: command not found ls: /tmp/HC/*.Z: No such file or directory [grid@vrh1 ~]$ 4. ??dd ?? ??ocr?votedisk??diskgroup [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskh bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00423853 seconds, 247 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskg bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.0045179 seconds, 232 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diski bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00469976 seconds, 223 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskj bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00344262 seconds, 305 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskk bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.0053518 seconds, 196 MB/s 5. ????????????HAS [root@vrh1 ~]# crsctl start has CRS-4123: Oracle High Availability Services has been started. ????ocr?votedisk??diskgroup??,??CSS???????,???????: alertvrh1.log [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:35:41.207 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:35:56.240 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:36:11.284 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:36:26.305 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:36:41.328 ocssd.log 2012-08-09 03:40:26.662: [ CSSD][1078700352]clssnmReadDiscoveryProfile: voting file discovery string(/dev/asm*) 2012-08-09 03:40:26.662: [ CSSD][1078700352]clssnmvDDiscThread: using discovery string /dev/asm* for initial discovery 2012-08-09 03:40:26.662: [ SKGFD][1078700352]Discovery with str:/dev/asm*: 2012-08-09 03:40:26.662: [ SKGFD][1078700352]UFS discovery with :/dev/asm*: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskf: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskb: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskj: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskh: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskc: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskd: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diske: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskg: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diski: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskk: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]OSS discovery with :/dev/asm*: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Handle 0xdf22a0 from lib :UFS:: for disk :/dev/asm-diskf: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Handle 0xf412a0 from lib :UFS:: for disk :/dev/asm-diskb: 2012-08-09 03:40:26.666: [ SKGFD][1078700352]Handle 0xf3a680 from lib :UFS:: for disk :/dev/asm-diskj: 2012-08-09 03:40:26.666: [ SKGFD][1078700352]Handle 0xf93da0 from lib :UFS:: for disk :/dev/asm-diskh: 2012-08-09 03:40:26.667: [ CSSD][1078700352]clssnmvDiskVerify: Successful discovery of 0 disks 2012-08-09 03:40:26.667: [ CSSD][1078700352]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery 2012-08-09 03:40:26.667: [ CSSD][1078700352]clssnmvFindInitialConfigs: No voting files found 2012-08-09 03:40:26.667: [ CSSD][1078700352](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds ?????ocr?votedisk??diskgroup?????: 1. ?-excl -nocrs ????cluster,??????ASM?? ????CRS [root@vrh1 vrh1]# crsctl start crs -excl -nocrs CRS-4123: Oracle High Availability Services has been started. CRS-2672: Attempting to start 'ora.mdnsd' on 'vrh1' CRS-2676: Start of 'ora.mdnsd' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'vrh1' CRS-2676: Start of 'ora.gpnpd' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'vrh1' CRS-2672: Attempting to start 'ora.gipcd' on 'vrh1' CRS-2676: Start of 'ora.cssdmonitor' on 'vrh1' succeeded CRS-2676: Start of 'ora.gipcd' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'vrh1' CRS-2672: Attempting to start 'ora.diskmon' on 'vrh1' CRS-2676: Start of 'ora.diskmon' on 'vrh1' succeeded CRS-2676: Start of 'ora.cssd' on 'vrh1' succeeded CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'vrh1' CRS-2672: Attempting to start 'ora.ctssd' on 'vrh1' CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'vrh1' CRS-2676: Start of 'ora.ctssd' on 'vrh1' succeeded CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.asm' on 'vrh1' CRS-2676: Start of 'ora.asm' on 'vrh1' succeeded 2.???ocr?votedisk??diskgroup,??compatible.asm???11.2: [root@vrh1 vrh1]# su - grid [grid@vrh1 ~]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 9 04:16:58 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> create diskgroup systemdg high redundancy disk '/dev/asm-diskh','/dev/asm-diskg','/dev/asm-diski','/dev/asm-diskj','/dev/asm-diskk' ATTRIBUTE 'compatible.rdbms' = '11.2', 'compatible.asm' = '11.2'; 3.?ocr backup???ocr??ocrcheck??: [root@vrh1 ~]# ocrconfig -restore /g01/11.2.0/grid/cdata/vrh-cluster/backup00.ocr [root@vrh1 ~]# ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 3180 Available space (kbytes) : 258940 ID : 1238458014 Device/File Name : +systemdg Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded 4. ????votedisk ,??????????: [grid@vrh1 ~]$ crsctl replace votedisk +SYSTEMDG CRS-4602: Failed 27 to add voting file 2e4e0fe285924f86bf5473d00dcc0388. CRS-4602: Failed 27 to add voting file 4fa54bb0cc5c4fafbf1a9be5479bf389. CRS-4602: Failed 27 to add voting file a109ead9ea4e4f28bfe233188623616a. CRS-4602: Failed 27 to add voting file 042c9fbd71b54f5abfcd3ab3408f3cf3. CRS-4602: Failed 27 to add voting file 7b5a8cd24f954fafbf835ad78615763f. Failed to replace voting disk group with +SYSTEMDG. CRS-4000: Command Replace failed, or completed with errors. ????????ASM???,???ASM: SQL> alter system set asm_diskstring='/dev/asm*'; System altered. SQL> create spfile from memory; File created. SQL> startup force mount; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string /g01/11.2.0/grid/dbs/spfile+AS M1.ora [grid@vrh1 trace]$ crsctl replace votedisk +SYSTEMDG CRS-4256: Updating the profile Successful addition of voting disk 85edc0e82d274f78bfc58cdc73b8c68a. Successful addition of voting disk 201ffffc8ba44faabfe2efec2aa75840. Successful addition of voting disk 6f2a25c589964faabf6980f7c5f621ce. Successful addition of voting disk 93eb315648454f25bf3717df1a2c73d5. Successful addition of voting disk 3737240678964f88bfbfbd31d8b3829f. Successfully replaced voting disk group with +SYSTEMDG. CRS-4256: Updating the profile CRS-4266: Voting file(s) successfully replaced 5. ??has??,??cluster????: [root@vrh1 ~]# crsctl check crs CRS-4638: Oracle High Availability Services is online CRS-4537: Cluster Ready Services is online CRS-4529: Cluster Synchronization Services is online CRS-4533: Event Manager is online [root@vrh1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 85edc0e82d274f78bfc58cdc73b8c68a (/dev/asm-diskh) [SYSTEMDG] 2. ONLINE 201ffffc8ba44faabfe2efec2aa75840 (/dev/asm-diskg) [SYSTEMDG] 3. ONLINE 6f2a25c589964faabf6980f7c5f621ce (/dev/asm-diski) [SYSTEMDG] 4. ONLINE 93eb315648454f25bf3717df1a2c73d5 (/dev/asm-diskj) [SYSTEMDG] 5. ONLINE 3737240678964f88bfbfbd31d8b3829f (/dev/asm-diskk) [SYSTEMDG] Located 5 voting disk(s). [root@vrh1 ~]# crsctl stat res -t -------------------------------------------------------------------------------- NAME TARGET STATE SERVER STATE_DETAILS -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.BACKUPDG.dg ONLINE ONLINE vrh1 ora.DATA.dg ONLINE ONLINE vrh1 ora.LISTENER.lsnr ONLINE ONLINE vrh1 ora.LSN_MACLEAN.lsnr ONLINE ONLINE vrh1 ora.SYSTEMDG.dg ONLINE ONLINE vrh1 ora.asm ONLINE ONLINE vrh1 Started ora.gsd OFFLINE OFFLINE vrh1 ora.net1.network ONLINE ONLINE vrh1 ora.ons ONLINE ONLINE vrh1 -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.LISTENER_SCAN1.lsnr http://www.askmaclean.com 1 ONLINE ONLINE vrh1 ora.cvu 1 OFFLINE OFFLINE ora.oc4j 1 OFFLINE OFFLINE ora.scan1.vip 1 ONLINE ONLINE vrh1 ora.vprod.db 1 ONLINE OFFLINE 2 ONLINE OFFLINE ora.vrh1.vip 1 ONLINE ONLINE vrh1 ora.vrh2.vip 1 ONLINE INTERMEDIATE vrh1 FAILED OVER

Read the article

??11.2 RAC??OCR?Votedisk??ASM Diskgroup?????

- by Liu Maclean(???)

????????Oracle Allstarts??????????ocr?votedisk?ASM diskgroup??11gR2 RAC cluster?????????,????«?11gR2 RAC???ASM DISK Path????»??????,??????CRS??????11.2??ASM???????, ????????????”crsctl start crs -excl -nocrs “; ?????????,??ASM????ocr?????votedisk?????,??11.2????ocr?votedisk???ASM?,?ASM???????ocr?votedisk,?????ocr?votedisk????????cluter??????;???????????CRS????,?????diskgroup??????????,?????????????????? ??:?????????????????ASM LUN DISK,???OCR?????,????????4??????????,???????$GI_HOME,?????????;????votedisk?? ????: ??dd????ocr?votedisk??diskgroup header,??diskgroup corruption: 1. ??votedisk? ocr?? [root@vrh1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE a853d6204bbc4feabfd8c73d4c3b3001 (/dev/asm-diskh) [SYSTEMDG] 2. ONLINE a5b37704c3574f0fbf21d1d9f58c4a6b (/dev/asm-diskg) [SYSTEMDG] 3. ONLINE 36e5c51ff0294fc3bf2a042266650331 (/dev/asm-diski) [SYSTEMDG] 4. ONLINE af337d1512824fe4bf6ad45283517aaa (/dev/asm-diskj) [SYSTEMDG] 5. ONLINE 3c4a349e2e304ff6bf64b2b1c9d9cf5d (/dev/asm-diskk) [SYSTEMDG] Located 5 voting disk(s). su - grid [grid@vrh1 ~]$ ocrconfig -showbackup PROT-26: Oracle Cluster Registry backup locations were retrieved from a local copy vrh1 2012/08/09 01:59:56 /g01/11.2.0/maclean/grid/cdata/vrh-cluster/backup00.ocr vrh1 2012/08/08 21:59:56 /g01/11.2.0/maclean/grid/cdata/vrh-cluster/backup01.ocr vrh1 2012/08/08 17:59:55 /g01/11.2.0/maclean/grid/cdata/vrh-cluster/backup02.ocr vrh1 2012/08/08 05:59:54 /g01/11.2.0/grid/cdata/vrh-cluster/day.ocr vrh1 2012/08/08 05:59:54 /g01/11.2.0/grid/cdata/vrh-cluster/week.ocr PROT-25: Manual backups for the Oracle Cluster Registry are not available 2. ??????????clusterware ,OHASD crsctl stop has -f 3. GetAsmDH.sh ==> GetAsmDH.sh?ASM disk header????? ????????,????????asm header [grid@vrh1 ~]$ ./GetAsmDH.sh ############################################ 1) Collecting Information About the Disks: ############################################ SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 9 03:28:13 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. SQL> Connected. SQL> SQL> SQL> SQL> SQL> SQL> SQL> 1 0 /dev/asm-diske 1 1 /dev/asm-diskd 2 0 /dev/asm-diskb 2 1 /dev/asm-diskc 2 2 /dev/asm-diskf 3 0 /dev/asm-diskh 3 1 /dev/asm-diskg 3 2 /dev/asm-diski 3 3 /dev/asm-diskj 3 4 /dev/asm-diskk SQL> SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options -rw-r--r-- 1 grid oinstall 1048 Aug 9 03:28 /tmp/HC/asmdisks.lst ############################################ 2) Generating asm_diskh.sh script. ############################################ -rwx------ 1 grid oinstall 666 Aug 9 03:28 /tmp/HC/asm_diskh.sh ############################################ 3) Executing asm_diskh.sh script to generate dd dumps. ############################################ -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_1_0.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_1_1.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_2_0.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_2_1.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_2_2.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_0.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_1.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_2.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_3.dd -rw-r--r-- 1 grid oinstall 1048576 Aug 9 03:28 /tmp/HC/dsk_3_4.dd ############################################ 4) Compressing dd dumps in the next format: (asm_dd_header_all_.tar) ############################################ /tmp/HC/dsk_1_0.dd /tmp/HC/dsk_1_1.dd /tmp/HC/dsk_2_0.dd /tmp/HC/dsk_2_1.dd /tmp/HC/dsk_2_2.dd /tmp/HC/dsk_3_0.dd /tmp/HC/dsk_3_1.dd /tmp/HC/dsk_3_2.dd /tmp/HC/dsk_3_3.dd /tmp/HC/dsk_3_4.dd ./GetAsmDH.sh: line 81: compress: command not found ls: /tmp/HC/*.Z: No such file or directory [grid@vrh1 ~]$ 4. ??dd ?? ??ocr?votedisk??diskgroup [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskh bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00423853 seconds, 247 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskg bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.0045179 seconds, 232 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diski bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00469976 seconds, 223 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskj bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00344262 seconds, 305 MB/s [root@vrh1 ~]# dd if=/dev/zero of=/dev/asm-diskk bs=1024k count=1 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.0053518 seconds, 196 MB/s 5. ????????????HAS [root@vrh1 ~]# crsctl start has CRS-4123: Oracle High Availability Services has been started. ????ocr?votedisk??diskgroup??,??CSS???????,???????: alertvrh1.log [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:35:41.207 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:35:56.240 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:36:11.284 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:36:26.305 [cssd(5162)]CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds; Details at (:CSSNM00070:) in /g01/11.2.0/grid/log/vrh1/cssd/ocssd.log 2012-08-09 03:36:41.328 ocssd.log 2012-08-09 03:40:26.662: [ CSSD][1078700352]clssnmReadDiscoveryProfile: voting file discovery string(/dev/asm*) 2012-08-09 03:40:26.662: [ CSSD][1078700352]clssnmvDDiscThread: using discovery string /dev/asm* for initial discovery 2012-08-09 03:40:26.662: [ SKGFD][1078700352]Discovery with str:/dev/asm*: 2012-08-09 03:40:26.662: [ SKGFD][1078700352]UFS discovery with :/dev/asm*: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskf: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskb: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskj: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskh: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskc: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskd: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diske: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskg: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diski: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Fetching UFS disk :/dev/asm-diskk: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]OSS discovery with :/dev/asm*: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Handle 0xdf22a0 from lib :UFS:: for disk :/dev/asm-diskf: 2012-08-09 03:40:26.665: [ SKGFD][1078700352]Handle 0xf412a0 from lib :UFS:: for disk :/dev/asm-diskb: 2012-08-09 03:40:26.666: [ SKGFD][1078700352]Handle 0xf3a680 from lib :UFS:: for disk :/dev/asm-diskj: 2012-08-09 03:40:26.666: [ SKGFD][1078700352]Handle 0xf93da0 from lib :UFS:: for disk :/dev/asm-diskh: 2012-08-09 03:40:26.667: [ CSSD][1078700352]clssnmvDiskVerify: Successful discovery of 0 disks 2012-08-09 03:40:26.667: [ CSSD][1078700352]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery 2012-08-09 03:40:26.667: [ CSSD][1078700352]clssnmvFindInitialConfigs: No voting files found 2012-08-09 03:40:26.667: [ CSSD][1078700352](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds ?????ocr?votedisk??diskgroup?????: 1. ?-excl -nocrs ????cluster,??????ASM?? ????CRS [root@vrh1 vrh1]# crsctl start crs -excl -nocrs CRS-4123: Oracle High Availability Services has been started. CRS-2672: Attempting to start 'ora.mdnsd' on 'vrh1' CRS-2676: Start of 'ora.mdnsd' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'vrh1' CRS-2676: Start of 'ora.gpnpd' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'vrh1' CRS-2672: Attempting to start 'ora.gipcd' on 'vrh1' CRS-2676: Start of 'ora.cssdmonitor' on 'vrh1' succeeded CRS-2676: Start of 'ora.gipcd' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'vrh1' CRS-2672: Attempting to start 'ora.diskmon' on 'vrh1' CRS-2676: Start of 'ora.diskmon' on 'vrh1' succeeded CRS-2676: Start of 'ora.cssd' on 'vrh1' succeeded CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'vrh1' CRS-2672: Attempting to start 'ora.ctssd' on 'vrh1' CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'vrh1' CRS-2676: Start of 'ora.ctssd' on 'vrh1' succeeded CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'vrh1' succeeded CRS-2672: Attempting to start 'ora.asm' on 'vrh1' CRS-2676: Start of 'ora.asm' on 'vrh1' succeeded 2.???ocr?votedisk??diskgroup,??compatible.asm???11.2: [root@vrh1 vrh1]# su - grid [grid@vrh1 ~]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Thu Aug 9 04:16:58 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> create diskgroup systemdg high redundancy disk '/dev/asm-diskh','/dev/asm-diskg','/dev/asm-diski','/dev/asm-diskj','/dev/asm-diskk' ATTRIBUTE 'compatible.rdbms' = '11.2', 'compatible.asm' = '11.2'; 3.?ocr backup???ocr??ocrcheck??: [root@vrh1 ~]# ocrconfig -restore /g01/11.2.0/grid/cdata/vrh-cluster/backup00.ocr [root@vrh1 ~]# ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 3180 Available space (kbytes) : 258940 ID : 1238458014 Device/File Name : +systemdg Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded 4. ????votedisk ,??????????: [grid@vrh1 ~]$ crsctl replace votedisk +SYSTEMDG CRS-4602: Failed 27 to add voting file 2e4e0fe285924f86bf5473d00dcc0388. CRS-4602: Failed 27 to add voting file 4fa54bb0cc5c4fafbf1a9be5479bf389. CRS-4602: Failed 27 to add voting file a109ead9ea4e4f28bfe233188623616a. CRS-4602: Failed 27 to add voting file 042c9fbd71b54f5abfcd3ab3408f3cf3. CRS-4602: Failed 27 to add voting file 7b5a8cd24f954fafbf835ad78615763f. Failed to replace voting disk group with +SYSTEMDG. CRS-4000: Command Replace failed, or completed with errors. ????????ASM???,???ASM: SQL> alter system set asm_diskstring='/dev/asm*'; System altered. SQL> create spfile from memory; File created. SQL> startup force mount; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string /g01/11.2.0/grid/dbs/spfile+AS M1.ora [grid@vrh1 trace]$ crsctl replace votedisk +SYSTEMDG CRS-4256: Updating the profile Successful addition of voting disk 85edc0e82d274f78bfc58cdc73b8c68a. Successful addition of voting disk 201ffffc8ba44faabfe2efec2aa75840. Successful addition of voting disk 6f2a25c589964faabf6980f7c5f621ce. Successful addition of voting disk 93eb315648454f25bf3717df1a2c73d5. Successful addition of voting disk 3737240678964f88bfbfbd31d8b3829f. Successfully replaced voting disk group with +SYSTEMDG. CRS-4256: Updating the profile CRS-4266: Voting file(s) successfully replaced 5. ??has??,??cluster????: [root@vrh1 ~]# crsctl check crs CRS-4638: Oracle High Availability Services is online CRS-4537: Cluster Ready Services is online CRS-4529: Cluster Synchronization Services is online CRS-4533: Event Manager is online [root@vrh1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 85edc0e82d274f78bfc58cdc73b8c68a (/dev/asm-diskh) [SYSTEMDG] 2. ONLINE 201ffffc8ba44faabfe2efec2aa75840 (/dev/asm-diskg) [SYSTEMDG] 3. ONLINE 6f2a25c589964faabf6980f7c5f621ce (/dev/asm-diski) [SYSTEMDG] 4. ONLINE 93eb315648454f25bf3717df1a2c73d5 (/dev/asm-diskj) [SYSTEMDG] 5. ONLINE 3737240678964f88bfbfbd31d8b3829f (/dev/asm-diskk) [SYSTEMDG] Located 5 voting disk(s). [root@vrh1 ~]# crsctl stat res -t -------------------------------------------------------------------------------- NAME TARGET STATE SERVER STATE_DETAILS -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.BACKUPDG.dg ONLINE ONLINE vrh1 ora.DATA.dg ONLINE ONLINE vrh1 ora.LISTENER.lsnr ONLINE ONLINE vrh1 ora.LSN_MACLEAN.lsnr ONLINE ONLINE vrh1 ora.SYSTEMDG.dg ONLINE ONLINE vrh1 ora.asm ONLINE ONLINE vrh1 Started ora.gsd OFFLINE OFFLINE vrh1 ora.net1.network ONLINE ONLINE vrh1 ora.ons ONLINE ONLINE vrh1 -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.LISTENER_SCAN1.lsnr http://www.askmaclean.com 1 ONLINE ONLINE vrh1 ora.cvu 1 OFFLINE OFFLINE ora.oc4j 1 OFFLINE OFFLINE ora.scan1.vip 1 ONLINE ONLINE vrh1 ora.vprod.db 1 ONLINE OFFLINE 2 ONLINE OFFLINE ora.vrh1.vip 1 ONLINE ONLINE vrh1 ora.vrh2.vip 1 ONLINE INTERMEDIATE vrh1 FAILED OVER

Read the article

Emulating old-school sprite flickering (theory and concept)

- by Jeffrey Kern

I'm trying to develop an oldschool NES-style video game, with sprite flickering and graphical slowdown. I've been thinking of what type of logic I should use to enable such effects. I have to consider the following restrictions if I want to go old-school NES style: No more than 64 sprites on the screen at a time No more than 8 sprites per scanline, or for each line on the Y axis If there is too much action going on the screen, the system freezes the image for a frame to let the processor catch up with the action From what I've read up, if there were more than 64 sprites on the screen, the developer would only draw high-priority sprites while ignoring low-priority ones. They could also alternate, drawing each even numbered sprite on opposite frames from odd numbered ones. The scanline issue is interesting. From my testing, it is impossible to get good speed on the XBOX 360 XNA framework by drawing sprites pixel-by-pixel, like the NES did. This is why in old-school games, if there were too many sprites on a single line, some would appear if they were cut in half. For all purposes for this project, I'm making scanlines be 8 pixels tall, and grouping the sprites together per scanline by their Y positioning. So, dumbed down I need to come up with a solution that.... 64 sprites on screen at once 8 sprites per 'scanline' Can draw sprites based on priority Can alternate between sprites per frame Emulate slowdown Here is my current theory First and foremost, a fundamental idea I came up with is addressing sprite priority. Assuming values between 0-255 (0 being low), I can assign sprites priority levels, for instance: 0 to 63 being low 63 to 127 being medium 128 to 191 being high 192 to 255 being maximum Within my data files, I can assign each sprite to be a certain priority. When the parent object is created, the sprite would randomly get assigned a number between its designated range. I would then draw sprites in order from high to low, with the end goal of drawing every sprite. Now, when a sprite gets drawn in a frame, I would then randomly generate it a new priority value within its initial priority level. However, if a sprite doesn't get drawn in a frame, I could add 32 to its current priority. For example, if the system can only draw sprites down to a priority level of 135, a sprite with an initial priority of 45 could then be drawn after 3 frames of not being drawn (45+32+32+32=141) This would, in theory, allow sprites to alternate frames, allow priority levels, and limit sprites to 64 per screen. Now, the interesting question is how do I limit sprites to only 8 per scanline? I'm thinking that if I'm sorting the sprites high-priority to low-priority, iterate through the loop until I've hit 64 sprites drawn. However, I shouldn't just take the first 64 sprites in the list. Before drawing each sprite, I could check to see how many sprites were drawn in it's respective scanline via counter variables . For example: Y-values between 0 to 7 belong to Scanline 0, scanlineCount[0] = 0 Y-values between 8 to 15 belong to Scanline 1, scanlineCount[1] = 0 etc. I could reset the values per scanline for every frame drawn. While going down the sprite list, add 1 to the scanline's respective counter if a sprite gets drawn in that scanline. If it equals 8, don't draw that sprite and go to the sprite with the next lowest priority. SLOWDOWN The last thing I need to do is emulate slowdown. My initial idea was that if I'm drawing 64 sprites per frame and there's still more sprites that need to be drawn, I could pause the rendering by 16ms or so. However, in the NES games I've played, sometimes there's slowdown if there's not any sprite flickering going on whereas the game moves beautifully even if there is some sprite flickering. Perhaps give a value to each object that uses sprites on the screen (like the priority values above), and if the combined values of all objects w/ sprites surpass a threshold, introduce the sprite flickering? IN CONCLUSION... Does everything I wrote actually sound legitimate and could work, or is it a pipe dream? What improvements can you all possibly think with this game programming theory of mine?

Read the article

custom type face class by dinesh?

- by dineshpeiris

package typeface{ import flash.display.*; import flash.events.Event; import flash.filters.BitmapFilter; import flash.filters.BitmapFilterQuality; import flash.filters.BlurFilter; public class Main extends Sprite { private var typeSet:String="SEE > THINK > CREATE"; private var collectionSet:MovieClip; private var w:int = 1; public function Main():void { trace("start typeface application"); collectionSet = new MovieClip(); for (var n:int = 0; n < typeSet.length; n++) { var _x:int = 0 + (40 * n); var _y:int = 0; var Type:TypeCollector = new TypeCollector(_x, _y, stringToCharacter(typeSet, n), collectionSet); Type.addEventListener("action", actionHandler); } collectionSet.x = 100; collectionSet.y = (stage.stageHeight / 2) - 80; addChild(collectionSet); } private function actionHandler(event:Event):void { if (w == 16) { collectionSet.filters = [new BlurFilter(30, 30, BitmapFilterQuality.HIGH)]; removeChild(collectionSet); } w++; } public function stringToCharacter(str:String, n:int):String { if (str.length == 1) { return str; } return str.slice(n, n+1); } } } package typeface { import flash.display.*; import flash.events.Event; import flash.utils.Timer; import flash.events.TimerEvent; import flash.filters.BitmapFilter; import flash.filters.BitmapFilterQuality; import flash.filters.BlurFilter; import flash.events.EventDispatcher; public class TypeCollector extends EventDispatcher { private var TYPE_MC:typeMC; private var typeArray:Array = new Array("A", "B", "C", "D", "E", "F", "G", "H", "I", "J", "K", "L", "M", "N", "O", "P", "Q", "R", "S", "T", "U", "V", "W", "X", "Y", "Z", "1", "2", "3", "4", "5", "6", "7", "8", "9", "0", "<", ">"); private var character:String; private var num:int = 0; private var TypeTimer:Timer; private var _xNum:int; private var _yNum:int; private var movieClip:MovieClip; public function TypeCollector(_x:int, _y:int, char:String, movie:MovieClip) { var totalNum:int = typeArray.length; _xNum = _x; _yNum = _y; movieClip = movie; character = char; TypeTimer = new Timer(100, totalNum); TypeTimer.addEventListener("timer", TypeRoutTimer); TypeTimer.start(); } public function TypeRoutTimer(event:TimerEvent):void { CreateTypeFace(num, _xNum, _yNum, character); num++; } public function CreateTypeFace(num:int, _x:int, _y:int, character:String) { if (character == " ") { } else { if (TYPE_MC != null) { TYPE_MC.filters = [new BlurFilter(30, 30, BitmapFilterQuality.HIGH)]; movieClip.removeChild(TYPE_MC); } if (typeArray[num] == character) { TYPE_MC = new typeMC(); TYPE_MC.x = _x; TYPE_MC.y = _y; TYPE_MC.typeTF.text = typeArray[num]; TYPE_MC.filters = [new BlurFilter(5, 5, BitmapFilterQuality.HIGH)]; movieClip.addChild(TYPE_MC); dispatchEvent(new Event("action")); TypeTimer.stop(); } else { TYPE_MC = new typeMC(); TYPE_MC.x = _x; TYPE_MC.y = _y; TYPE_MC.typeTF.text = typeArray[num]; TYPE_MC.filters = [new BlurFilter(10, 10, BitmapFilterQuality.HIGH)]; movieClip.addChild(TYPE_MC); } } } } }

Read the article

Reading XML File

- by Joy

I'm developping an iphone application which uses google weather api to forecast the weather. The webservice is giving me data in the following format:- <?xml version="1.0"?> <xml_api_reply version="1"> <weather module_id="0" tab_id="0" mobile_row="0" mobile_zipped="1" row="0" section="0" > <forecast_information> <city data="Kolkata, West Bengal"/> <postal_code data="Kolkata"/> <latitude_e6 data=""/> <longitude_e6 data=""/> <forecast_date data="2010-04-28"/> <current_date_time data="2010-04-28 10:20:00 +0000"/> <unit_system data="US"/> </forecast_information> <current_conditions ><condition data="Haze"/> <temp_f data="97"/> <temp_c data="36"/> <humidity data="Humidity: 53%"/> <icon data="/ig/images/weather/haze.gif"/> <wind_condition data="Wind: S at 12 mph"/> </current_conditions> <forecast_conditions> <day_of_week data="Wed"/> <low data="82"/> <high data="91"/> <icon data="/ig/images/weather/chance_of_rain.gif"/> <condition data="Chance of Rain"/> </forecast_conditions> <forecast_conditions> <day_of_week data="Thu"/> <low data="82"/> <high data="96"/> <icon data="/ig/images/weather/rain.gif"/> <condition data="Rain"/> </forecast_conditions> <forecast_conditions> <day_of_week data="Fri"/> <low data="82"/> <high data="96"/> <icon data="/ig/images/weather/sunny.gif"/> <condition data="Clear"/> </forecast_conditions> <forecast_conditions> <day_of_week data="Sat"/> <low data="78"/> <high data="98"/> <icon data="/ig/images/weather/mostly_sunny.gif"/> <condition data="Mostly Sunny"/> </forecast_conditions> </weather> As I'm new to iPhone development so i'm facing problem while reading this using xmlparser. Please help me out of this problem. Looking forward to your valuable reply. Thanks in advance..

Read the article

Arduino crashes when sending bytes from Java [on hold]

- by francisaugusto

I used the sample program from the arduino website in order to send and receive data via serial to my Arduino one. However, for some reason, even when I try to send only one byte, the Arduino crashes after a while. It doesn't happen if I send the chars manually via the IDE's own serial monitor. I wrote the following method to output the character to Arduino: public synchronized void serialWrite(char sendIt){ try { output.write((byte)'0'); output.flush(); for (int j=0;j<1000000000;j++){ } }catch (Exception e){System.out.println("Not connected...");} notify(); } What I try above is to send just one character when the method is called. I send just a '0' char for testing. After manually calling the method two or three times, Arduino crashes. Is there anything I should be looking into? The Arduino code: #include <SoftwareSerial.h> int buttonState=0; int lastButtonState=0; int buttonPushCounter=0; long previousMillis=0; long interval=250; int ledState=LOW; int ledState2=LOW; int ledState3=LOW; long timeElapsed=0; SoftwareSerial portOne(10,11); void setup(){ pinMode(3,OUTPUT); pinMode(4,OUTPUT); pinMode(5,OUTPUT); pinMode(2,INPUT); Serial.begin(9600); portOne.begin(9600); } boolean turnoff; void loop(){ if(portOne.overflow()){ Serial.println("There's an overflow here!"); } buttonState= digitalRead(2); if(buttonState!=lastButtonState){ if (buttonState==HIGH){ buttonPushCounter++; } } lastButtonState=buttonState; if (turnoff){ unsigned long currentMillis=millis(); if (currentMillis-previousMillis>0 && currentMillis-previousMillis<interval){ ledState=HIGH; ledState2=LOW; ledState3=LOW; }else if (currentMillis-previousMillis>interval && currentMillis-previousMillis<interval*2){ ledState=LOW; ledState2=LOW; ledState3=HIGH; }else if (currentMillis-previousMillis>interval*2 && currentMillis-previousMillis<interval*3){ ledState=LOW; ledState2=HIGH; ledState3=LOW; }else if (currentMillis-previousMillis>interval*3){ previousMillis=currentMillis; } digitalWrite(3,ledState); digitalWrite(4,ledState2); digitalWrite(5,ledState3); }else{ digitalWrite(3,LOW); digitalWrite(4,LOW); digitalWrite(5,LOW); } if (buttonPushCounter==1){ Serial.print("Button pressed!\n"); turnoff=!turnoff; buttonPushCounter=0; } noInterrupts(); char ch=Serial.read(); delay(1); if(ch=='0'){ Serial.println("Changed by serial"+turnoff); Serial.println(ch); turnoff=!turnoff; } interrupts(); }

Read the article

A very strange problem related to Flash and Java

- by Nitesh Panchal

Hello, I have created one simple program for showing webcam of the user. It works absolutely fine when i am running without integrating it in my java web application. But as soon as i copy paste the same files in Netbeans 6.8 and try to run it. My swf file is visible but the buttons in it are totally unclickable. I get the message of allow or deny showing webcam but the buttons are not clickable. It makes my application totally useless. I thought it's a minor issue but now it's getting on my nerves. I am trying it since 3 hours but didn't find any solution. I don't think anybody faced this issue till now that's why can't seem to find any thread in any forum on it in google. I am using Netbeans 6.8, Ubuntu, Glassfish V3 and JSF. Thanks in advance :). UPDATE:- It works fine on Windows XP. Then what can be the problem with Ubuntu? Any kind of permission rights that i need to give? 2nd UPDATE:- I think this is bug with Flash. I found that this code doesn't work :- <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0" id="VideoConferenceAdmin" align="middle"> <param name="allowScriptAccess" value="sameDomain" /> <param name="wmode" value="opaque"/> <param name="allowFullScreen" value="false" /> <param NAME="FlashVars" VALUE="rootIp=localhost&userName=admin&roomName=test" /> <param name="movie" value="Conference/VideoConference.swf" /><param name="quality" value="high" /> <embed src="Conference/VideoConference.swf" wmode="window" FlashVars="rootIp=localhost&userName=test&roomName=test" quality="high" width="600" height="500" name="VideoConference" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" /> </object> And this one works :- <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0" id="VideoConferenceAdmin" align="middle"> <param name="allowScriptAccess" value="sameDomain" /> <param name="wmode" value="opaque"/> <param name="allowFullScreen" value="false" /> <param NAME="FlashVars" VALUE="rootIp=localhost&userName=admin&roomName=test" /> <param name="movie" value="Conference/VideoConference.swf" /><param name="quality" value="high" /> <embed src="Conference/VideoConference.swf" wmode="window" FlashVars="rootIp=localhost&userName=test&roomName=test" quality="high" name="VideoConference" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" /> </object> As you can see, just by removing the height and width attribute the panels of Flash settings work fine. I know you will find me funny but i am not. You can check out on your own if you don't trust me. Now, my question would be, can anybody tell me how do i set height and width of swf? I want it to be 600px width and 500px height. Even the style attribute doesn't work. Can i set height and width from within Flash? because without explicitly setting height and width, it looks very small. I think this should be very easy for all now. Thanks in advance :)

Read the article

Having trouble returning a value from a method call when sending an array and the program is error out when run in reference to the sort

- by programmerNOOB

I am getting the following output when this program is run: Please enter the Social Security Number for taxpayer 0: 111111111 Please enter the gross income for taxpayer 0: 20000 Please enter the Social Security Number for taxpayer 1: 555555555 Please enter the gross income for taxpayer 1: 50000 Please enter the Social Security Number for taxpayer 2: 333333333 Please enter the gross income for taxpayer 2: 5464166 Please enter the Social Security Number for taxpayer 3: 222222222 Please enter the gross income for taxpayer 3: 645641 Please enter the Social Security Number for taxpayer 4: 444444444 Please enter the gross income for taxpayer 4: 29000 Taxpayer # 1 SSN: 111111111, Income is $20,000.00, Tax is $0.00 Taxpayer # 2 SSN: 555555555, Income is $50,000.00, Tax is $0.00 Taxpayer # 3 SSN: 333333333, Income is $5,464,166.00, Tax is $0.00 Taxpayer # 4 SSN: 222222222, Income is $645,641.00, Tax is $0.00 Taxpayer # 5 SSN: 444444444, Income is $29,000.00, Tax is $0.00 Unhandled Exception: System.InvalidOperationException: Failed to compare two elements in the array. --- System.ArgumentException: At least one object must implement IComparable. at System.Collections.Comparer.Compare(Object a, Object b) at System.Collections.Generic.ObjectComparer`1.Compare(T x, T y) at System.Collections.Generic.ArraySortHelper`1.SwapIfGreaterWithItems(T[] keys, IComparer`1 comparer, Int32 a, Int32 b) at System.Collections.Generic.ArraySortHelper`1.QuickSort(T[] keys, Int32 left, Int32 right, IComparer`1 comparer) at System.Collections.Generic.ArraySortHelper`1.Sort(T[] keys, Int32 index, Int32 length, IComparer`1 comparer) --- End of inner exception stack trace --- at System.Collections.Generic.ArraySortHelper`1.Sort(T[] keys, Int32 index, Int32 length, IComparer`1 comparer) at System.Array.Sort[T](T[] array, Int32 index, Int32 length, IComparer`1 comparer) at System.Array.Sort[T](T[] array) at Assignment5.Taxpayer.Main(String[] args) in Program.cs:line 150 Notice the 0s at the end of the line that should be the tax amount??? Here is the code: using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace taxes { class Rates { // Create a class named rates that has the following data members: private int incLimit; private double lowTaxRate; private double highTaxRate; // use read-only accessor public int IncomeLimit { get { return incLimit; } } public double LowTaxRate { get { return lowTaxRate; } } public double HighTaxRate { get { return highTaxRate; } } //A class constructor that assigns default values public Rates() { int limit = 30000; double lowRate = .15; double highRate = .28; incLimit = limit; lowTaxRate = lowRate; highTaxRate = highRate; } //A class constructor that takes three parameters to assign input values for limit, low rate and high rate. public Rates(int limit, double lowRate, double highRate) { } // A CalculateTax method that takes an income parameter and computes the tax as follows: public int CalculateTax(int income) { int limit = 0; double lowRate = 0; double highRate = 0; int taxOwed = 0; // If income is less than the limit then return the tax as income times low rate. if (income < limit) taxOwed = Convert.ToInt32(income * lowRate); // If income is greater than or equal to the limit then return the tax as income times high rate. if (income >= limit) taxOwed = Convert.ToInt32(income * highRate); return taxOwed; } } //end class Rates // Create a class named Taxpayer that has the following data members: public class Taxpayer { //Use get and set accessors. string SSN { get; set; } int grossIncome { get; set; } // Use read-only accessor. public int taxOwed { get { return taxOwed; } } // The Taxpayer class should be set up so that its objects are comparable to each other based on tax owed. class taxpayer : IComparable { public int taxOwed { get; set; } public int income { get; set; } int IComparable.CompareTo(Object o) { int returnVal; taxpayer temp = (taxpayer)o; if (this.taxOwed > temp.taxOwed) returnVal = 1; else if (this.taxOwed < temp.taxOwed) returnVal = -1; else returnVal = 0; return returnVal; } // End IComparable.CompareTo } //end taxpayer IComparable class // **The tax should be calculated whenever the income is set. // The Taxpayer class should have a getRates class method that has the following. public static void GetRates() { // Local method data members for income limit, low rate and high rate. int incLimit = 0; double lowRate; double highRate; string userInput; // Prompt the user to enter a selection for either default settings or user input of settings. Console.Write("Would you like the default values (D) or would you like to enter the values (E)?: "); /* If the user selects default the default values you will instantiate a rates object using the default constructor * and set the Taxpayer class data member for tax equal to the value returned from calling the rates object CalculateTax method.*/ userInput = Convert.ToString(Console.ReadLine()); if (userInput == "D" || userInput == "d") { Rates rates = new Rates(); rates.CalculateTax(incLimit); } // end if /* If the user selects to enter the rates data then prompt the user to enter values for income limit, low rate and high rate, * instantiate a rates object using the three-argument constructor passing those three entries as the constructor arguments and * set the Taxpayer class data member for tax equal to the valuereturned from calling the rates object CalculateTax method. */ if (userInput == "E" || userInput == "e") { Console.Write("Please enter the income limit: "); incLimit = Convert.ToInt32(Console.ReadLine()); Console.Write("Please enter the low rate: "); lowRate = Convert.ToDouble(Console.ReadLine()); Console.Write("Please enter the high rate: "); highRate = Convert.ToDouble(Console.ReadLine()); Rates rates = new Rates(incLimit, lowRate, highRate); rates.CalculateTax(incLimit); } } static void Main(string[] args) { Taxpayer[] taxArray = new Taxpayer[5]; Rates taxRates = new Rates(); // Implement a for-loop that will prompt the user to enter the Social Security Number and gross income. for (int x = 0; x < taxArray.Length; ++x) { taxArray[x] = new Taxpayer(); Console.Write("Please enter the Social Security Number for taxpayer {0}: ", x + 1); taxArray[x].SSN = Console.ReadLine(); Console.Write("Please enter the gross income for taxpayer {0}: ", x + 1); taxArray[x].grossIncome = Convert.ToInt32(Console.ReadLine()); } Taxpayer.GetRates(); // Implement a for-loop that will display each object as formatted taxpayer SSN, income and calculated tax. for (int i = 0; i < taxArray.Length; ++i) { Console.WriteLine("Taxpayer # {0} SSN: {1}, Income is {2:c}, Tax is {3:c}", i + 1, taxArray[i].SSN, taxArray[i].grossIncome, taxRates.CalculateTax(taxArray[i].grossIncome)); } // end for // Implement a for-loop that will sort the five objects in order by the amount of tax owed Array.Sort(taxArray); Console.WriteLine("Sorted by tax owed"); for (int i = 0; i < taxArray.Length; ++i) { Console.WriteLine("Taxpayer # {0} SSN: {1}, Income is {2:c}, Tax is {3:c}", i + 1, taxArray[i].SSN, taxArray[i].grossIncome, taxRates.CalculateTax(taxArray[i].grossIncome)); } } //end main } // end Taxpayer class } //end Any clues as to why the dollar amount is coming up as 0 and why the sort is not working?

Read the article

Sharepoint Error: [COMException (0x80004005): Cannot complete this action.

- by ifunky

Hi, I've created a site basic definition that uses different master and default pages. Everything works quite well except for whenever I create a new site based on the definition I receive the following error when browsing to the new site: [COMException (0x80004005): Cannot complete this action. Please try again.] Please try again.] Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocId, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder) +0 Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, Byte& pVerGhostedSetupPath, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocId, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder) +219 [SPException: Cannot complete this action. Please try again.] I'm able to work around this by checking out the new master page and checking it back in again and after doing so there are no further issues at all. Any ideas to what could cause this? Thanks Dan ONET.XML module section: <Modules> <Module Name="CustomMasterPage" List="116" Url="_catalogs/masterpage" RootWebOnly="FALSE"> <File Url="Shoes.master" Type="GhostableInLibrary" IgnoreIfAlreadyExists="TRUE" /> </Module> <Module Name="Default" List="116" Url=""> <File Url="default.aspx" Name="default.aspx" NavBarHome="True" IgnoreIfAlreadyExists="FALSE"> <AllUsersWebPart WebPartZoneID="Left" WebPartOrder="1"> <webParts><webPart xmlns="http://schemas.microsoft.com/WebPart/v3"><metaData><type name="BCM.SharePoint.Shoes.ShoesComponents.FooterLinks, BCM.SharePoint.Shoes.ShoesComponents, Version=1.0.0.0, Culture=neutral, PublicKeyToken=2881713f39360b71" /><importErrorMessage>Cannot import this Web Part.</importErrorMessage></metaData><data><properties><property name="AllowClose" type="bool">True</property><property name="Width" type="string" /><property name="MyProperty" type="string">Hello SharePoint</property><property name="AllowMinimize" type="bool">True</property><property name="AllowConnect" type="bool">True</property><property name="ChromeType" type="chrometype">None</property><property name="TitleIconImageUrl" type="string">/_layouts/images/BCM_SharePoint_Shoes/wp_FooterLinks.gif</property><property name="Description" type="string">FooterLinks Description</property><property name="Hidden" type="bool">False</property><property name="TitleUrl" type="string" /><property name="AllowEdit" type="bool">True</property><property name="Height" type="string" /><property name="MissingAssembly" type="string">Cannot import this Web Part.</property><property name="HelpUrl" type="string" /><property name="Title" type="string" /><property name="CatalogIconImageUrl" type="string">/_layouts/images/BCM_SharePoint_Shoes/wp_FooterLinks.gif</property><property name="Direction" type="direction">NotSet</property><property name="ChromeState" type="chromestate">Normal</property><property name="AllowZoneChange" type="bool">True</property><property name="AllowHide" type="bool">True</property><property name="HelpMode" type="helpmode">Modeless</property><property name="ExportMode" type="exportmode">All</property></properties></data></webPart></webParts> </AllUsersWebPart> <AllUsersWebPart WebPartZoneID="Left" WebPartOrder="0"> <webParts><webPart xmlns="http://schemas.microsoft.com/WebPart/v3"><metaData><type name="BCM.SharePoint.Shoes.ShoesComponents.SubFooterLinks, BCM.SharePoint.Shoes.ShoesComponents, Version=1.0.0.0, Culture=neutral, PublicKeyToken=2881713f39360b71" /><importErrorMessage>Cannot import this Web Part.</importErrorMessage></metaData><data><properties><property name="AllowClose" type="bool">True</property><property name="Width" type="string" /><property name="MyProperty" type="string">Hello SharePoint</property><property name="AllowMinimize" type="bool">True</property><property name="AllowConnect" type="bool">True</property><property name="ChromeType" type="chrometype">None</property><property name="TitleIconImageUrl" type="string">/_layouts/images/BCM_SharePoint_Shoes/wp_SubFooterLinks.gif</property><property name="Description" type="string">Shoes home page links (under the hero image)</property><property name="Hidden" type="bool">False</property><property name="TitleUrl" type="string" /><property name="AllowEdit" type="bool">True</property><property name="Height" type="string" /><property name="MissingAssembly" type="string">Cannot import this Web Part.</property><property name="HelpUrl" type="string" /><property name="Title" type="string" /><property name="CatalogIconImageUrl" type="string">/_layouts/images/BCM_SharePoint_Shoes/wp_SubFooterLinks.gif</property><property name="Direction" type="direction">NotSet</property><property name="ChromeState" type="chromestate">Normal</property><property name="AllowZoneChange" type="bool">True</property><property name="AllowHide" type="bool">True</property><property name="HelpMode" type="helpmode">Modeless</property><property name="ExportMode" type="exportmode">All</property></properties></data></webPart></webParts> </AllUsersWebPart> <NavBarPage Name="$Resources:core,nav_Home;" ID="1002" Position="Start" /> <NavBarPage Name="$Resources:core,nav_Home;" ID="0" Position="Start" /> </File> </Module> </Modules> LOG OUTPUT: 05/21/2010 12:22:55.11 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72nz Medium Videntityinfo::isFreshToken reported failure. 05/21/2010 12:22:55.19 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yv Medium Creating default lists 05/21/2010 12:22:55.19 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72lp Medium Creating directory Lists 05/21/2010 12:22:55.26 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yf Medium Creating list "Master Page Gallery" in web "http://mmm-dev-ll/sites/Shoes/test" at URL "_catalogs/masterpage", (setuppath: "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\Template\global\lists\mplib") 05/21/2010 12:22:55.28 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88y1 Medium No document templates uploaded for list "Master Page Gallery" -- none found for list template "100". 05/21/2010 12:22:55.28 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72kc Medium Failed to find generic XML file at "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\Template\xml\onet.xml", falling back to global site definition. 05/21/2010 12:22:56.22 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yz Medium Creating default modules at URL "http://mmm-dev-ll/sites/Shoes/test" 05/21/2010 12:22:56.22 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8e27 Medium Ensuring module folder _catalogs/masterpage 05/21/2010 12:22:56.89 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72h7 Medium Applying template "SubSite#1" to web at URL "http://mmm-dev-ll/sites/Shoes/test". 05/21/2010 12:22:57.09 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yy Medium Activating web-scoped features for template "SubSite#1" at URL "http://mmm-dev-ll/sites/Shoes/test" 05/21/2010 12:22:57.12 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1c Medium Preparing 20 features for activation 05/21/2010 12:22:57.14 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1d Medium Feature Activation: Batch Activating Features at URL http://mmm-dev-ll/sites/Shoes/test 'AnnouncementsList' (ID: '00bfea71-d1ce-42de-9c63-a44004ce0104'), 'ContactsList' (ID: '00bfea71-7e6d-4186-9ba8-c047ac750105'), 'CustomList' (ID: '00bfea71-de22-43b2-a848-c05709900100'), 'DataSourceLibrary' (ID: '00bfea71-f381-423d-b9d1-da7a54c50110'), 'DiscussionsList' (ID: '00bfea71-6a49-43fa-b535-d15c05500108'), 'DocumentLibrary' (ID: '00bfea71-e717-4e80-aa17-d0c71b360101'), 'EventsList' (ID: '00bfea71-ec85-4903-972d-ebe475780106'), 'GanttTasksList' (ID: '00bfea71-513d-4ca0-96c2-6a47775c0119'), 'GridList' (ID: '00bfea71-3a1d-41d3-a0ee-651d11570120'), 'IssuesList' (ID: '00bfea71-5932-4f9c-ad71-1557e5751100'), 'LinksList' (ID: '00bfea71-2062-426c-90bf-714c59600103'), 'NoCodeWorkflowLibrary' (ID: '00bfe... 05/21/2010 12:22:57.14* w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1d Medium ...a71-f600-43f6-a895-40c0de7b0117'), 'PictureLibrary' (ID: '00bfea71-52d4-45b3-b544-b1c71b620109'), 'SurveysList' (ID: '00bfea71-eb8a-40b1-80c7-506be7590102'), 'TasksList' (ID: '00bfea71-a83e-497e-9ba0-7a5c597d0107'), 'WebPageLibrary' (ID: '00bfea71-c796-4402-9f2f-0eb9a6e71b18'), 'workflowProcessList' (ID: '00bfea71-2d77-4a75-9fca-76516689e21a'), 'WorkflowHistoryList' (ID: '00bfea71-4ea5-48d4-a4ad-305cf7030140'), 'XmlFormLibrary' (ID: '00bfea71-1e1d-4562-b56a-f05371bb0115'), 'TeamCollab' (ID: '00bfea71-4ea5-48d4-a4ad-7ea5c011abe5'), . 05/21/2010 12:22:57.15 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1f Medium Feature Activation: Batch Activated Features at URL http://mmm-dev-ll/sites/Shoes/test 'AnnouncementsList' (ID: '00bfea71-d1ce-42de-9c63-a44004ce0104'), 'ContactsList' (ID: '00bfea71-7e6d-4186-9ba8-c047ac750105'), 'CustomList' (ID: '00bfea71-de22-43b2-a848-c05709900100'), 'DataSourceLibrary' (ID: '00bfea71-f381-423d-b9d1-da7a54c50110'), 'DiscussionsList' (ID: '00bfea71-6a49-43fa-b535-d15c05500108'), 'DocumentLibrary' (ID: '00bfea71-e717-4e80-aa17-d0c71b360101'), 'EventsList' (ID: '00bfea71-ec85-4903-972d-ebe475780106'), 'GanttTasksList' (ID: '00bfea71-513d-4ca0-96c2-6a47775c0119'), 'GridList' (ID: '00bfea71-3a1d-41d3-a0ee-651d11570120'), 'IssuesList' (ID: '00bfea71-5932-4f9c-ad71-1557e5751100'), 'LinksList' (ID: '00bfea71-2062-426c-90bf-714c59600103'), 'NoCodeWorkflowLibrary' (ID: '00bfea... 05/21/2010 12:22:57.15* w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8l1f Medium ...71-f600-43f6-a895-40c0de7b0117'), 'PictureLibrary' (ID: '00bfea71-52d4-45b3-b544-b1c71b620109'), 'SurveysList' (ID: '00bfea71-eb8a-40b1-80c7-506be7590102'), 'TasksList' (ID: '00bfea71-a83e-497e-9ba0-7a5c597d0107'), 'WebPageLibrary' (ID: '00bfea71-c796-4402-9f2f-0eb9a6e71b18'), 'workflowProcessList' (ID: '00bfea71-2d77-4a75-9fca-76516689e21a'), 'WorkflowHistoryList' (ID: '00bfea71-4ea5-48d4-a4ad-305cf7030140'), 'XmlFormLibrary' (ID: '00bfea71-1e1d-4562-b56a-f05371bb0115'), 'TeamCollab' (ID: '00bfea71-4ea5-48d4-a4ad-7ea5c011abe5'), . 05/21/2010 12:22:57.15 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 88jb Medium Feature Activation: Activating Feature 'RadEditorFeatureRichText' (ID: '747755cd-d060-4663-961c-9b0cc43724e9') at URL http://mmm-dev-ll/sites/Shoes/test. 05/21/2010 12:22:57.15 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 75fb Medium Calling 'FeatureActivated' method of SPFeatureReceiver for Feature 'RadEditorFeatureRichText' (ID: '747755cd-d060-4663-961c-9b0cc43724e9'). 05/21/2010 12:22:57.20 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 75f8 Medium Feature Activation: Feature 'RadEditorFeatureRichText' (ID: '747755cd-d060-4663-961c-9b0cc43724e9') was activated at URL http://mmm-dev-ll/sites/Shoes/test. 05/21/2010 12:22:57.51 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yv Medium Creating default lists 05/21/2010 12:22:57.51 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72lp Medium Creating directory Lists 05/21/2010 12:22:57.51 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services Fields 88yz Medium Creating default modules at URL "http://mmm-dev-ll/sites/Shoes/test" 05/21/2010 12:22:57.51 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 8e27 Medium Ensuring module folder _catalogs/masterpage 05/21/2010 12:22:57.56 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72ix Medium Not enough information to determine a list for module "Default". Assuming no list for this module. 05/21/2010 12:22:57.87 w3wp.exe (0x1E40) 0x18A4 Windows SharePoint Services General 72h8 Medium Successfully applied template "SubSite#1" to web at URL "http://mmm-dev-ll/sites/Shoes/test". 05/21/2010 12:22:59.48 w3wp.exe (0x1E40) 0x0980 Windows SharePoint Services General 8e2s Medium Unknown SPRequest error occurred. More information: 0x80070057 05/21/2010 12:23:07.06 OWSTIMER.EXE (0x0884) 0x106C Office Server Setup and Upgrade 8u3j High Registry key value {SearchThrottled} was not found under registry hive {Software\Microsoft\Office Server\12.0}. Assuming search sku is not throttled. 05/21/2010 12:23:07.08 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 90gf Medium SQL: dbo.proc_MSS_PropagationGetQueryServers 05/21/2010 12:23:07.09 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 8wni High Resuming default catalog with reason 'GPR_PROPAGATION' for application 'SharedServices1'... 05/21/2010 12:23:07.11 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 8wnj High Resuming anchor text catalog with reason GPR_PROPAGATION' for application 'SharedServices1'... 05/21/2010 12:23:07.14 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 8dvl Medium Search application '3c6751cc-37b0-470a-bfa2-bfd0b5635fe1': Provision start addresses in default content source. 05/21/2010 12:23:07.15 OWSTIMER.EXE (0x0884) 0x106C Search Server Common MS Search Administration 7hmh High exception in SearchUpgradeProvisioner Keyword Config System.InvalidOperationException: jobServerSearchServiceInstance is null at Microsoft.Office.Server.Search.Administration.SearchUpgradeProvisioner..ctor(SearchServiceInstance searchServiceInstance) at Microsoft.Office.Server.Search.Administration.OSSPrimaryGathererProject.ProvisionContentSources() 05/21/2010 12:23:29.19 OWSTIMER.EXE (0x0884) 0x0FFC SharePoint Portal Server Business Data 79bv High Initiating BDC Cache Invalidation Check in AppDomain 'DefaultDomain' 05/21/2010 12:23:29.19 OWSTIMER.EXE (0x0884) 0x0FFC SharePoint Portal Server Business Data 79bx High Completed BDC Cache Invalidation Check in AppDomain 'DefaultDomain' 05/21/2010 12:23:45.84 OWSTIMER.EXE (0x0884) 0x08A8 SharePoint Portal Server SSO 8inc Medium In SSOService::Synch(), sso database conn string: 05/21/2010 12:23:50.80 OWSTIMER.EXE (0x0884) 0x0F14 Excel Services Excel Services Administration 8tqi Medium ExcelServerSharedWebApplication.Synchronize: Starting synchronize for instance of Excel Services in SSP 'SharedServices1'. 05/21/2010 12:23:50.80 OWSTIMER.EXE (0x0884) 0x0F14 Excel Services Excel Services Administration 8tqj Medium ExcelServerSharedWebApplication.Synchronize: Successfully synchronized instance of Excel Services in SSP 'SharedServices1'. 05/21/2010 12:23:52.31 w3wp.exe (0x1E40) 0x0980 SharePoint Portal Server Runtime 8gp7 Medium Topology cache updated. (AppDomain: /LM/W3SVC/1963195510/Root-1-129188762904047141)

Read the article

New MySQL Cluster 7.3 Previews: Foreign Keys, NoSQL Node.js API and Auto-Tuned Clusters

- by Mat Keep

At this weeks MySQL Connect conference, Oracle previewed an exciting new wave of developments for MySQL Cluster, further extending its simplicity and flexibility by expanding the range of use-cases, adding new NoSQL options, and automating configuration. What’s new: Development Release 1: MySQL Cluster 7.3 with Foreign Keys Early Access “Labs” Preview: MySQL Cluster NoSQL API for Node.js Early Access “Labs” Preview: MySQL Cluster GUI-Based Auto-Installer In this blog, I'll introduce you to the features being previewed. Review the blogs listed below for more detail on each of the specific features discussed. Save the date!: A live webinar is scheduled for Thursday 25th October at 0900 Pacific Time / 1600UTC where we will discuss each of these enhancements in more detail. Registration will be open soon and published to the MySQL webinars page MySQL Cluster 7.3: Development Release 1 The first MySQL Cluster 7.3 Development Milestone Release (DMR) previews Foreign Keys, bringing powerful new functionality to MySQL Cluster while eliminating development complexity. Foreign Key support has been one of the most requested enhancements to MySQL Cluster – enabling users to simplify their data models and application logic – while extending the range of use-cases for both custom projects requiring referential integrity and packaged applications, such as eCommerce, CRM, CMS, etc. Implementation The Foreign Key functionality is implemented directly within the MySQL Cluster data nodes, allowing any client API accessing the cluster to benefit from them – whether they are SQL or one of the NoSQL interfaces (Memcached, C++, Java, JPA, HTTP/REST or the new Node.js API - discussed later.) The core referential actions defined in the SQL:2003 standard are implemented: CASCADE RESTRICT NO ACTION SET NULL In addition, the MySQL Cluster implementation supports the online adding and dropping of Foreign Keys, ensuring the Cluster continues to serve both read and write requests during the operation. This represents a further enhancement to MySQL Cluster's support for on0line schema changes, ie adding and dropping indexes, adding columns, etc. Read this blog for a demonstration of using Foreign Keys with MySQL Cluster. Getting Started with MySQL Cluster 7.3 DMR1: Users can download either the source or binary and evaluate the MySQL Cluster 7.3 DMR with Foreign Keys now! (Select the Development Release tab). MySQL Cluster NoSQL API for Node.js Node.js is hot! In a little over 3 years, it has become one of the most popular environments for developing next generation web, cloud, mobile and social applications. Bringing JavaScript from the browser to the server, the design goal of Node.js is to build new real-time applications supporting millions of client connections, serviced by a single CPU core. Making it simple to further extend the flexibility and power of Node.js to the database layer, we are previewing the Node.js Javascript API for MySQL Cluster as an Early Access release, available for download now from http://labs.mysql.com/. Select the following build: MySQL-Cluster-NoSQL-Connector-for-Node-js Alternatively, you can clone the project at the MySQL GitHub page. Implemented as a module for the V8 engine, the new API provides Node.js with a native, asynchronous JavaScript interface that can be used to both query and receive results sets directly from MySQL Cluster, without transformations to SQL. Figure 1: MySQL Cluster NoSQL API for Node.js enables end-to-end JavaScript development Rather than just presenting a simple interface to the database, the Node.js module integrates the MySQL Cluster native API library directly within the web application itself, enabling developers to seamlessly couple their high performance, distributed applications with a high performance, distributed, persistence layer delivering 99.999% availability. The new Node.js API joins a rich array of NoSQL interfaces available for MySQL Cluster. Whichever API is chosen for an application, SQL and NoSQL can be used concurrently across the same data set, providing the ultimate in developer flexibility. Get started with MySQL Cluster NoSQL API for Node.js tutorial MySQL Cluster GUI-Based Auto-Installer Compatible with both MySQL Cluster 7.2 and 7.3, the Auto-Installer makes it simple for DevOps teams to quickly configure and provision highly optimized MySQL Cluster deployments – whether on-premise or in the cloud. Implemented with a standard HTML GUI and Python-based web server back-end, the Auto-Installer intelligently configures MySQL Cluster based on application requirements and auto-discovered hardware resources Figure 2: Automated Tuning and Configuration of MySQL Cluster Developed by the same engineering team responsible for the MySQL Cluster database, the installer provides standardized configurations that make it simple, quick and easy to build stable and high performance clustered environments. The auto-installer is previewed as an Early Access release, available for download now from http://labs.mysql.com/, by selecting the MySQL-Cluster-Auto-Installer build. You can read more about getting started with the MySQL Cluster auto-installer here. Watch the YouTube video for a demonstration of using the MySQL Cluster auto-installer Getting Started with MySQL Cluster If you are new to MySQL Cluster, the Getting Started guide will walk you through installing an evaluation cluster on a singe host (these guides reflect MySQL Cluster 7.2, but apply equally well to 7.3 and the Early Access previews). Or use the new MySQL Cluster Auto-Installer! Download the Guide to Scaling Web Databases with MySQL Cluster (to learn more about its architecture, design and ideal use-cases). Post any questions to the MySQL Cluster forum where our Engineering team and the MySQL Cluster community will attempt to assist you. Post any bugs you find to the MySQL bug tracking system (select MySQL Cluster from the Category drop-down menu) And if you have any feedback, please post them to the Comments section here or in the blogs referenced in this article. Summary MySQL Cluster 7.2 is the GA, production-ready release of MySQL Cluster. The first Development Release of MySQL Cluster 7.3 and the Early Access previews give you the opportunity to preview and evaluate future developments in the MySQL Cluster database, and we are very excited to be able to share that with you. Let us know how you get along with MySQL Cluster 7.3, and other features that you want to see in future releases, by using the comments of this blog.

Read the article

AWS: setting up auto-scale for EC2 instances

- by Elton Stoneman

Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/16/aws-setting-up-auto-scale-for-ec2-instances.aspxWith Amazon Web Services, there’s no direct equivalent to Azure Worker Roles – no Elastic Beanstalk-style application for .NET background workers. But you can get the auto-scale part by configuring an auto-scaling group for your EC2 instance. This is a step-by-step guide, that shows you how to create the auto-scaling configuration, which for EC2 you need to do with the command line, and then link your scaling policies to CloudWatch alarms in the Web console. I’m using queue size as my metric for CloudWatch, which is a good fit if your background workers are pulling messages from a queue and processing them. If the queue is getting too big, the “high” alarm will fire and spin up a new instance to share the workload. If the queue is draining down, the “low” alarm will fire and shut down one of the instances. To start with, you need to manually set up your app in an EC2 VM, for a background worker that would mean hosting your code in a Windows Service (I always use Topshelf). If you’re dual-running Azure and AWS, then you can isolate your logic in one library, with a generic entry point that has Start() and Stop() functions, so your Worker Role and Windows Service are essentially using the same code. When you have your instance set up with the Windows Service running automatically, and you’ve tested it starts up and works properly from a reboot, shut the machine down and take an image of the VM, using Create Image (EBS AMI) from the Web Console: When that completes, you’ll have your own AMI which you can use to spin up new instances, and you’re ready to create your auto-scaling group. You need to dip into the command-line tools for this, so follow this guide to set up the AWS autoscale command line tool. Now we’re ready to go. 1. Create a launch configuration This launch configuration tells AWS what to do when a new instance needs to be spun up. You create it with the as-create-launch-config command, which looks like this: as-create-launch-config sc-xyz-launcher # name of the launch config --image-id ami-7b9e9f12 # id of the AMI you extracted from your VM --region eu-west-1 # which region the new instance gets created in --instance-type t1.micro # size of the instance to create --group quicklaunch-1 #security group for the new instance 2. Create an auto-scaling group The auto-scaling group links to the launch config, and defines the overall configuration of the collection of instances: as-create-auto-scaling-group sc-xyz-asg # auto-scaling group name --region eu-west-1 # region to create in --launch-configuration sc-xyz-launcher # name of the launch config to invoke for new instances --min-size 1 # minimum number of nodes in the group --max-size 5 # maximum number of nodes in the group --default-cooldown 300 # period to wait (in seconds) after each scaling event, before checking if another scaling event is required --availability-zones eu-west-1a eu-west-1b eu-west-1c # which availability zones you want your instances to be allocated in – multiple entries means EC@ will use any of them 3. Create a scale-up policy The policy dictates what will happen in response to a scaling event being triggered from a “high” alarm being breached. It links to the auto-scaling group; this sample results in one additional node being spun up: as-put-scaling-policy scale-up-policy # policy name -g sc-psod-woker-asg # auto-scaling group the policy works with --adjustment 1 # size of the adjustment --region eu-west-1 # region --type ChangeInCapacity # type of adjustment, this specifies a fixed number of nodes, but you can use PercentChangeInCapacity to make an adjustment relative to the current number of nodes, e.g. increasing by 50% 4. Create a scale-down policy The policy dictates what will happen in response to a scaling event being triggered from a “low” alarm being breached. It links to the auto-scaling group; this sample results in one node from the group being taken offline: as-put-scaling-policy scale-down-policy -g sc-psod-woker-asg "--adjustment=-1" # in Windows, use double-quotes to surround a negative adjustment value –-type ChangeInCapacity --region eu-west-1 5. Create a “high” CloudWatch alarm We’re done with the command line now. In the Web Console, open up the CloudWatch view and create a new alarm. This alarm will monitor your metrics and invoke the scale-up policy from your auto-scaling group, when the group is working too hard. Configure your metric – this example will fire the alarm if there are more than 10 messages in my queue for over a minute: Then link the alarm to the scale-up policy in your group: 6. Create a “low” CloudWatch alarm The opposite of step 4, this alarm will trigger when the instances in your group don’t have enough work to do (e.g fewer than 2 messages in the queue for 1 minute), and will invoke the scale-down policy. And that’s it. You don’t need your original VM as the auto-scale group has a minimum number of nodes connected. You can test out the scaling by flexing your CloudWatch metric – in this example, filling up a queue from a stub publisher – and watching AWS create new nodes as required, then stopping the publisher and watch AWS kill off the spare nodes.

Read the article

World Record Batch Rate on Oracle JD Edwards Consolidated Workload with SPARC T4-2

- by Brian

Oracle produced a World Record batch throughput for single system results on Oracle's JD Edwards EnterpriseOne Day-in-the-Life benchmark using Oracle's SPARC T4-2 server running Oracle Solaris Containers and consolidating JD Edwards EnterpriseOne, Oracle WebLogic servers and the Oracle Database 11g Release 2. The workload includes both online and batch workload. The SPARC T4-2 server delivered a result of 8,000 online users while concurrently executing a mix of JD Edwards EnterpriseOne Long and Short batch processes at 95.5 UBEs/min (Universal Batch Engines per minute). In order to obtain this record benchmark result, the JD Edwards EnterpriseOne, Oracle WebLogic and Oracle Database 11g Release 2 servers were executed each in separate Oracle Solaris Containers which enabled optimal system resources distribution and performance together with scalable and manageable virtualization. One SPARC T4-2 server running Oracle Solaris Containers and consolidating JD Edwards EnterpriseOne, Oracle WebLogic servers and the Oracle Database 11g Release 2 utilized only 55% of the available CPU power. The Oracle DB server in a Shared Server configuration allows for optimized CPU resource utilization and significant memory savings on the SPARC T4-2 server without sacrificing performance. This configuration with SPARC T4-2 server has achieved 33% more Users/core, 47% more UBEs/min and 78% more Users/rack unit than the IBM Power 770 server. The SPARC T4-2 server with 2 processors ran the JD Edwards "Day-in-the-Life" benchmark and supported 8,000 concurrent online users while concurrently executing mixed batch workloads at 95.5 UBEs per minute. The IBM Power 770 server with twice as many processors supported only 12,000 concurrent online users while concurrently executing mixed batch workloads at only 65 UBEs per minute. This benchmark demonstrates more than 2x cost savings by consolidating the complete solution in a single SPARC T4-2 server compared to earlier published results of 10,000 users and 67 UBEs per minute on two SPARC T4-2 and SPARC T4-1. The Oracle DB server used mirrored (RAID 1) volumes for the database providing high availability for the data without impacting performance. Performance Landscape JD Edwards EnterpriseOne Day in the Life (DIL) Benchmark Consolidated Online with Batch Workload System Rack Units BatchRate(UBEs/m) Online Users Users /Units Users /Core Version SPARC T4-2 (2 x SPARC T4, 2.85 GHz) 3 95.5 8,000 2,667 500 9.0.2 IBM Power 770 (4 x POWER7, 3.3 GHz, 32 cores) 8 65 12,000 1,500 375 9.0.2 Batch Rate (UBEs/m) — Batch transaction rate in UBEs per minute Configuration Summary Hardware Configuration: 1 x SPARC T4-2 server with 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 4 x 300 GB 10K RPM SAS internal disk 2 x 300 GB internal SSD 2 x Sun Storage F5100 Flash Arrays Software Configuration: Oracle Solaris 10 Oracle Solaris Containers JD Edwards EnterpriseOne 9.0.2 JD Edwards EnterpriseOne Tools (8.98.4.2) Oracle WebLogic Server 11g (10.3.4) Oracle HTTP Server 11g Oracle Database 11g Release 2 (11.2.0.1) Benchmark Description JD Edwards EnterpriseOne is an integrated applications suite of Enterprise Resource Planning (ERP) software. Oracle offers 70 JD Edwards EnterpriseOne application modules to support a diverse set of business operations. Oracle's Day in the Life (DIL) kit is a suite of scripts that exercises most common transactions of JD Edwards EnterpriseOne applications, including business processes such as payroll, sales order, purchase order, work order, and manufacturing processes, such as ship confirmation. These are labeled by industry acronyms such as SCM, CRM, HCM, SRM and FMS. The kit's scripts execute transactions typical of a mid-sized manufacturing company. The workload consists of online transactions and the UBE – Universal Business Engine workload of 61 short and 4 long UBEs. LoadRunner runs the DIL workload, collects the user’s transactions response times and reports the key metric of Combined Weighted Average Transaction Response time. The UBE processes workload runs from the JD Enterprise Application server. Oracle's UBE processes come as three flavors: Short UBEs < 1 minute engage in Business Report and Summary Analysis, Mid UBEs > 1 minute create a large report of Account, Balance, and Full Address, Long UBEs > 2 minutes simulate Payroll, Sales Order, night only jobs. The UBE workload generates large numbers of PDF files reports and log files. The UBE Queues are categorized as the QBATCHD, a single threaded queue for large and medium UBEs, and the QPROCESS queue for short UBEs run concurrently. Oracle's UBE process performance metric is Number of Maximum Concurrent UBE processes at transaction rate, UBEs/minute. Key Points and Best Practices Two JD Edwards EnterpriseOne Application Servers, two Oracle WebLogic Servers 11g Release 1 coupled with two Oracle Web Tier HTTP server instances and one Oracle Database 11g Release 2 database on a single SPARC T4-2 server were hosted in separate Oracle Solaris Containers bound to four processor sets to demonstrate consolidation of multiple applications, web servers and the database with best resource utilizations. Interrupt fencing was configured on all Oracle Solaris Containers to channel the interrupts to processors other than the processor sets used for the JD Edwards Application server, Oracle WebLogic servers and the database server. A Oracle WebLogic vertical cluster was configured on each WebServer Container with twelve managed instances each to load balance users' requests and to provide the infrastructure that enables scaling to high number of users with ease of deployment and high availability. The database log writer was run in the real time RT class and bound to a processor set. The database redo logs were configured on the raw disk partitions. The Oracle Solaris Container running the Enterprise Application server completed 61 Short UBEs, 4 Long UBEs concurrently as the mixed size batch workload. The mixed size UBEs ran concurrently from the Enterprise Application server with the 8,000 online users driven by the LoadRunner. See Also SPARC T4-2 Server oracle.com OTN JD Edwards EnterpriseOne oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Oracle Fusion Middleware oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 09/30/2012.

Read the article

Verizon Wireless Supports its Mission-Critical Employee Portal with MySQL

- by Bertrand Matthelié

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Verizon Wireless, the #1 mobile carrier in the United States, operates the nation’s largest 3G and 4G LTE network, with the most subscribers (109 millions) and the highest revenue ($70.2 Billion in 2011). Verizon Wireless built the first wide-area wireless broadband network and delivered the first wireless consumer 3G multimedia service in the US, and offers global voice and data services in more than 200 destinations around the world. To support 4.2 million daily wireless transactions and 493,000 calls and emails transactions produced by 94.2 million retail customers, Verizon Wireless employs over 78,000 employees with area headquarters across the United States. The Business Challenge Seeing the stupendous rise in social media, video streaming, live broadcasting…etc which redefined the scope of technology, Verizon Wireless, as a technology savvy company, wanted to provide a platform to its employees where they could network socially, view and host microsites, stream live videos, blog and provide the latest news. The IT team at Verizon Wireless had abundant experience with various technology platforms to support the huge number of applications in the company. However, open-source products weren’t yet widely used in the organization and the team had the ambition to adopt such technologies and see if the architecture could meet Verizon Wireless’ rigid requirements. After evaluating a few solutions, the IT team decided to use the LAMP stack for Vzweb, its mission-critical, 24x7 employee portal, with Drupal as the front end and MySQL on Linux as the backend, and for a few other internal websites also on MySQL. The MySQL Solution Verizon Wireless started to support its employee portal, Vzweb, its online streaming website, Vztube, and internal wiki pages, Vzwiki, with MySQL 5.1 in 2010. Vzweb is the main internal communication channel for Verizon Wireless, while Vztube hosts important company-wide webcasts regularly for executive-level announcements, so both channels have to be live and accessible all the time for its 78,000 employees across the United States. However during the initial deployment of the MySQL based Intranet, the application experienced performance issues. High connection spikes occurred causing slow user response time, and the IT team applied workarounds to continue the service. A number of key performance indexes (KPI) for the infrastructure were identified and the operational framework redesigned to support a more robust website and conform to the 99.985% uptime SLA (Service-Level Agreement). The MySQL DBA team made a series of upgrades in MySQL: Step 1: Moved from MyISAM to InnoDB storage engine in 2010 Step 2: Upgraded to the latest MySQL 5.1.54 release in 2010 Step 3: Upgraded from MySQL 5.1 to the latest GA release MySQL 5.5 in 2011, and leveraging MySQL Thread Pool as part of MySQL Enterprise Edition to scale better After making those changes, the team saw a much better response time during high concurrency use cases, and achieved an amazing performance improvement of 1400%! In January 2011, Verizon CEO, Ivan Seidenberg, announced the iPhone launch during the opening keynote at Consumer Electronic Show (CES) in Las Vegas, and that presentation was streamed live to its 78,000 employees. The event was broadcasted flawlessly with MySQL as the database. Later in 2011, Hurricane Irene attacked the East Coast of United States and caused major life and financial damages. During the hurricane, the team directed more traffic to its west coast data center to avoid potential infrastructure damage in the East Coast. Such transition was executed smoothly and even though the geographical distance became longer for the East Coast users, there was no impact in the performance of Vzweb and Vztube, and the SLA goal was achieved. “MySQL is the key component of Verizon Wireless’ mission-critical employee portal application,” said Shivinder Singh, senior DBA at Verizon Wireless. “We achieved 1400% performance improvement by moving from the MyISAM storage engine to InnoDB, upgrading to the latest GA release MySQL 5.5, and using the MySQL Thread Pool to support high concurrent user connections. MySQL has become part of our IT infrastructure, on which potentially more future applications will be built.” To learn more about MySQL Enterprise Edition, Get our Product Guide.

Read the article

OTN Architect Day Headed to Reston, VA - May 16

- by Bob Rhubart

In 2011 OTN Architect Day made stops in Chicago, Denver, Phoenix, Redwood Shores, and Toronto. The 2012 series begins with OTN Architect Day in Reston, VA on Wednesday May 16. Registration is now open for this free event, but don't get caught napping -- seating is limited, and the event is just 5 weeks away. The information below reflects the most recent updates to the event agenda, including the addition of Oracle ACE Director Kai Yu as the guest keynote speaker. Kai is Senior System Engineer / Architect at Dell, Inc., and has been very busy of late as a speaker at various industry and Oracle User Group events. I'm very happy Kai has agreed to make the trek from his hometown in Austin, TX to share his insight at the Architect Day event in Reston. If you're in the area, put this one on your calendar. You won't be sorry. Venue Sheraton Reston Hotel 11810 Sunrise Valley Drive Reston, VA 20191 Event Agenda 8:30 am - 9:00 am Registration and Continental Breakfast 9:00 am - 9:15 am Welcome and Opening Comments 9:15 am - 10:00 am Engineered Systems: Oracle's Vision for the Future | Ralf Dossman Oracle's Exadata and Exalogic are impressive products in their own right. But working in combination they deliver unparalleled transaction processing performance with up to a 30x increase over existing legacy systems, with the lowest cost of ownership over a 3 or 5 year basis than any other hardware. In this session you'll learn how to leverage Oracle's Engineered Systems within your enterprise to deliver record-breaking performance at the lowest TCO. 10:00 am - 10:30 am High Availability Infrastructure for Cloud Computing | Kai Yu Infrastructure high availability is extremely critical to Cloud Computing. In a Cloud system that hosts a large number of databases and applications with different SLAs, any unplanned outage can be devastating, and even a small planned downtime may be unacceptable. This presentation will discuss various technology solutions and the related best practices that system architects should consider in cloud infrastructure design to ensure high availability. 10:30 am - 10:45 am Break 10:45 am - 11:30 am Breakout Sessions: (pick one) Innovations in Grid Computing with Oracle Coherence | Bjorn Boe Learn how Coherence can increase the availability, scalability and performance of your existing applications with its advanced low-latency data-grid technologies. Also hear some interesting industry-specific use cases that customers had implemented and how Oracle is integrating Coherence into its Enterprise Java stack. Cloud Computing - Making IT Simple | Scott Mattoon The road to Cloud Computing is not without a few bumps. This session will help to smooth out your journey by tackling some of the potential complications. We'll examine whether standardization is a prerequisite for the Cloud. We'll look at why refactoring isn't just for application code. We'll check out deployable entities and their simplification via higher levels of abstraction. And we'll close out the session with a look at engineered systems and modular clouds. 11:30 pm - 12:15 pm Breakout Sessions: (pick one) Oracle Enterprise Manager | Joe Diemer Oracle Enterprise Manager (EM) provides complete lifecycle management for the cloud - from automated cloud setup to self-service delivery to cloud operations. In this session you'll learn how to take control of your cloud infrastructure with EM features including Consolidation Planning and Self-Service provisioning with Metering and Chargeback. Come hear how Oracle is expanding its management capabilities into the cloud! Rationalization and Defense in Depth - Two Steps Closer to the Clouds | Dave Chappelle Security represents one of the biggest concerns about cloud computing. In this session we'll get past the FUD with a real-world look at some key issues. We'll discuss the infrastructure necessary to support rationalization and security services, explore architecture for defense -in-depth, and deal frankly with the good, the bad, and the ugly in Cloud security. 12:15 pm - 1:15 pm Lunch 1:40 pm - 2:00 pm Panel Discussion - Q&A 2:00 pm - 2:45 pm Breakout Sessions: (pick one) 21st Century SOA | Peter Belknap Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite's orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. And we'll take a special look at the convergence of SOA & BPM using Oracle's Unified technology stack. Track B: Oracle Cloud Reference Architecture | Anbu Krishnaswamy Cloud initiatives are beginning to dominate enterprise IT roadmaps. Successful adoption of Cloud and the subsequent governance challenges warrant a Cloud reference architecture that is applied consistently across the enterprise. This presentation gives an overview of Oracle's Cloud Reference Architecture, which is part of the Cloud Enterprise Technology Strategy (ETS). Concepts covered include common management layer capabilities, service models, resource pools, and use cases. 2:45 pm - 3:00 pm Break 3:00 pm - 4:00 pm Roundtable Discussions 4:00 pm - 4:15 pm Closing Comments & Readouts from Roundtable 4:15 pm - 5:00 pm Cocktail Reception / Networking Session schedule and content subject to change.

Read the article

Oracle Linux and Oracle VM pricing guide

- by wcoekaer

A few days ago someone showed me a pricing guide from a Linux vendor and I was a bit surprised at the complexity of it. Especially when you look at larger servers (4 or 8 sockets) and when adding virtual machine use into the mix. I think we have a very compelling and simple pricing model for both Oracle Linux and Oracle VM. Let me see if I can explain it in 1 page, not 10 pages. This pricing information is publicly available on the Oracle store, I am using the current public list prices. Also keep in mind that this is for customers using non-oracle x86 servers. When a customer purchases an Oracle x86 server, the annual systems support includes full use (all you can eat) of Oracle Linux, Oracle VM and Oracle Solaris (no matter how many VMs you run on that server, in case you deploy guests on a hypervisor). This support level is the equivalent of premier support in the list below. Let's start with Oracle VM (x86) : Oracle VM support subscriptions are per physical server on which you deploy the Oracle VM Server product. (1) Oracle VM Premier Limited - 1- or 2 socket server : $599 per server per year (2) Oracle VM Premier - more than 2 socket server (4, or 8 or whatever more) : $1199 per server per year The above includes the use of Oracle VM Manager and Oracle Enterprise Manager Cloud Control's Virtualization management pack (including self service cloud portal, etc..) 24x7 support, access to bugfixes, updates and new releases. It also includes all options, live migrate, dynamic resource scheduling, high availability, dynamic power management, etc If you want to play with the product, or even use the product without access to support services, the product is freely downloadable from edelivery. Next, Oracle Linux : Oracle Linux support subscriptions are per physical server. If you plan to run Oracle Linux as a guest on Oracle VM, VMWare or Hyper-v, you only have to pay for a single subscription per system, we do not charge per guest or per number of guests. In other words, you can run any number of Oracle Linux guests per physical server and count it as just a single subscription. (1) Oracle Linux Network Support - any number of sockets per server : $119 per server per year Network support does not offer support services. It provides access to the Unbreakable Linux Network and also offers full indemnification for Oracle Linux. (2) Oracle Linux Basic Limited Support - 1- or 2 socket servers : $499 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management. It includes ocfs2 as a clustered filesystem. (3) Oracle Linux Basic Support - more than 2 socket server (4, or 8 or more) : $1199 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management. It includes ocfs2 as a clustered filesystem (4) Oracle Linux Premier Limited Support - 1- or 2 socket servers : $1399 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management, XFS filesystem support. It also offers Oracle Lifetime support, backporting of patches for critical customers in previous versions of package and ksplice zero-downtime updates. (5) Oracle Linux Premier Support - more than 2 socket servers : $2299 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management, XFS filesystem support. It also offers Oracle Lifetime support, backporting of patches for critical customers in previous versions of package and ksplice zero-downtime updates. (6) Freely available Oracle Linux - any number of sockets You can freely download Oracle Linux, install it on any number of servers and use it for any reason, without support, without right to use of these extra features like Oracle Clusterware or ksplice, without indemnification. However, you do have full access to all errata as well. Need support? then use options (1)..(5) So that's it. Count number of 2 socket boxes, more than 2 socket boxes, decide on basic or premier support level and you are done. You don't have to worry about different levels based on how many virtual instance you deploy or want to deploy. A very simple menu of choices. We offer, inclusive, Linux OS clusterware, Linux OS Management, provisioning and monitoring, cluster filesystem (ocfs), high performance filesystem (xfs), dtrace, ksplice, ofed (infiniband stack for high performance networking). No separate add-on menus. NOTE : socket/cpu can have any number of cores. So whether you have a 4,6,8,10 or 12 core CPU doesn't matter, we count the number of physical CPUs.

Read the article

Big Data – Various Learning Resources – How to Start with Big Data? – Day 20 of 21

- by Pinal Dave

In yesterday’s blog post we learned how to become a Data Scientist for Big Data. In this article we will go over various learning resources related to Big Data. In this series we have covered many of the most essential details about Big Data. At the beginning of this series, I have encouraged readers to send me questions. One of the most popular questions is - “I want to learn more about Big Data. Where can I learn it?” This is indeed a great question as there are plenty of resources out to learn about Big Data and it is indeed difficult to select on one resource to learn Big Data. Hence I decided to write here a few of the very important resources which are related to Big Data. Learn from Pluralsight Pluralsight is a global leader in high-quality online training for hardcore developers. It has fantastic Big Data Courses and I started to learn about Big Data with the help of Pluralsight. Here are few of the courses which are directly related to Big Data. Big Data: The Big Picture Big Data Analytics with Tableau NoSQL: The Big Picture Understanding NoSQL Data Analysis Fundamentals with Tableau I encourage all of you start with this video course as they are fantastic fundamentals to learn Big Data. Learn from Apache Resources at Apache are single point the most authentic learning resources. If you want to learn fundamentals and go deep about every aspect of the Big Data, I believe you must understand various concepts in Apache’s library. I am pretty impressed with the documentation and I am personally referencing it every single day when I work with Big Data. I strongly encourage all of you to bookmark following all the links for authentic big data learning. Haddop - The Apache Hadoop® project develops open-source software for reliable, scalable, distributed computing. Ambari: A web-based tool for provisioning, managing, and monitoring Apache Hadoop clusters which include support for Hadoop HDFS, Hadoop MapReduce, Hive, HCatalog, HBase, ZooKeeper, Oozie, Pig and Sqoop. Ambari also provides a dashboard for viewing cluster health such as heat maps and ability to view MapReduce, Pig and Hive applications visually along with features to diagnose their performance characteristics in a user-friendly manner. Avro: A data serialization system. Cassandra: A scalable multi-master database with no single points of failure. Chukwa: A data collection system for managing large distributed systems. HBase: A scalable, distributed database that supports structured data storage for large tables. Hive: A data warehouse infrastructure that provides data summarization and ad hoc querying. Mahout: A Scalable machine learning and data mining library. Pig: A high-level data-flow language and execution framework for parallel computation. ZooKeeper: A high-performance coordination service for distributed applications. Learn from Vendors One of the biggest issues with about learning Big Data is setting up the environment. Every Big Data vendor has different environment request and there are lots of things require to set up Big Data framework. Many of the users do not start with Big Data as they are afraid about the resources required to set up framework as well as a time commitment. Here Hortonworks have created fantastic learning environment. They have created Sandbox with everything one person needs to learn Big Data and also have provided excellent tutoring along with it. Sandbox comes with a dozen hands-on tutorial that will guide you through the basics of Hadoop as well it contains the Hortonworks Data Platform. I think Hortonworks did a fantastic job building this Sandbox and Tutorial. Though there are plenty of different Big Data Vendors I have decided to list only Hortonworks due to their unique setup. Please leave a comment if there are any other such platform to learn Big Data. I will include them over here as well. Learn from Books There are indeed few good books out there which one can refer to learn Big Data. Here are few good books which I have read. I will update the list as I will learn more. Ethics of Big Data Balancing Risk and Innovation Big Data for Dummies Head First Data Analysis: A Learner’s Guide to Big Numbers, Statistics, and Good Decisions If you search on Amazon there are millions of the books but I think above three books are a great set of books and it will give you great ideas about Big Data. Once you go through above books, you will have a clear idea about what is the next step you should follow in this series. You will be capable enough to make the right decision for yourself. Tomorrow In tomorrow’s blog post we will wrap up this series of Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Search Results

Search found 7865 results on 315 pages for 'high density'.

Page 70/315 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77 | Next Page >

- by nimasmi

- by acjohnson55

- by Geotarget

- by Mirchi Sid

- by Tim Murphy

- by TammyBednar

- by ZooRocket

- by user134583

- by rituchhibber

- by Liu Maclean(???)

- by Liu Maclean(???)

- by Jeffrey Kern

- by dineshpeiris

- by Joy

- by francisaugusto

- by Nitesh Panchal

- by programmerNOOB

- by ifunky

- by Mat Keep

- by Elton Stoneman

- by Brian

- by Bertrand Matthelié

- by Bob Rhubart

- by wcoekaer

- by Pinal Dave

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77 | Next Page >